Page 1 :
INTRODUCTION, , A control system manages commands, directs or regulates the behavior of other devices or, systems using control loops. It can range from a single home heating controller using, a thermostat controlling a domestic boiler to large Industrial control systems which are used, for controlling processes or machines. A control system is a system, which provides the, desired response by controlling the output. The following figure shows the simple block, diagram of a control system., , Input Output, , Control, , System, , , , Examples - Traffic lights control system, washing machine, , Traffic lights control system is an example of control system. Here, a sequence of input, signal is applied to this control system and the output is one of the three lights that will be, on for some duration of time. During this time, the other two lights will be off. Based on the, traffic study at a particular junction, the on and off times of the lights can be determined., Accordingly, the input signal controls the output. So, the traffic lights control system, operates on time basis., , Classification of Control Systems, Based on some parameters, we can classify the control systems into the following ways., Continuous time and Discrete-time Control Systems, , * Control Systems can be classified as continuous time control systems and discrete, , time control systems based on the type of the signal used., , e Incontinuous time control systems, all the signals are continuous in time. But,, in discrete time control systems, there exists one or more discrete time signals., , SISO and MIMO Control Systems, e Control Systems can be classified as SISO control systems and MIMO control systems, , based on the number of inputs and outputs present., , e SISO (Single Input and Single Output) control systems have one input and one output., Whereas, MIMO (Multiple Inputs and Multiple Outputs) control systems have more, than one input and more than one output.