Page 1 :
(Class – VIII), , Exercises, Question 1:, Fill in the blanks, (a) Most liquids that conduct electricity are solutions of _________, __________ and ________., (b) The passage of an electric current through a solution causes ____________ effects., (c) If you pass current through copper sulphate solution, copper gets deposited on the, plate connected to the ____________ terminal of the battery., (d) The process of depositing a layer of any desired metal on another material by means, of electricity is called ____________., , Answer 1:, Fill in the blanks, (a) Most liquids that conduct electricity are solutions of acids, bases and salts., (b) The passage of an electric current through a solution causes chemical effects., (c) If you pass current through copper sulphate solution, copper gets deposited on the, plate connected to the negative terminal of the battery., (d) The process of depositing a layer of any desired metal on another material by means, of electricity is called electroplating., , Question 2:, When the free ends of a tester are dipped into a solution, the magnetic needle shows, deflection. Can you explain the reason?, , Answer 2:, The deflection of magnetic needle indicates electric current is flowing through the wire., It means the liquid or the solution is a good conductor of electricity. When the free ends, of a tester are dipped into a solution, electric circuit is completed and an electric current, passes through the solution., , Question 3:, Name three liquids, which when tested in the manner shown in Fig.14.9, may cause the, magnetic needle to deflect., , 1

Page 2 :
Answer 3:, Ground water, vinegar, citric fruit juice. The liquid solutions containing salts (basic or, acidic) will conduct electricity., , Question 4:, The bulb does not glow in the setup shown in Fig.14.10. List the possible reasons. Explain, your answer., , Answer 4:, There may be the following possible reasons for not to glow:,  Liquid solution in container is distilled water.,  Bulb may be fused.,  The battery has already been exhausted, there are no sufficient charges (electric, current) required for the bulb to glow.,  Any loose connection (air gaps) like electrodes are not properly connected to wire., , Question 5:, A tester is used to check the conduction of electricity through two liquids, labelled A and, B. It is found that the bulb of the tester glows brightly for liquid A while it glows very, dimly for liquid B. You would conclude that, (i) liquid A is a better conductor than liquid B., (ii) liquid B is a better conductor than liquid A., (iii) both liquids are equally conducting., (iv) conducting properties of liquid cannot be compared in this manner., , Answer 5:, , (i) Liquid A is a better conductor than liquid B., , 2

Page 3 :
Question 6:, Does pure water conduct electricity? If not, what can we do to make it conducting?, , Answer 6:, Pure or distilled water does not contain salts. Therefore it is a poor conductor of, electricity. We can add impurities like salt, lemon juice, vinegar etc. to make it conducting., , Question 7:, In case of a fire, before the firemen use the water hoses, they shut off the main electrical, supply for the area. Explain why they do this., , Answer 7:, The water usually contain salts and is a good conductor of electricity. To save themselves, and others from electric shock and to avoid any short circuit, firemen shut off the main, electrical supply for the area., , Question 8:, A child staying in a coastal region tests the drinking water and also the seawater with his, tester. He finds that the compass needle deflects more in the case of seawater. Can you, explain the reason?, , Answer 8:, Drinking water is chemically treated and purified by removing various impurities and, salts from it. While the sea water contains lots of mineral salts. Therefore, sea water, produce more ions (more electric charges) as compared to drinking water and the child, sees more deflection in magnetic needle in case of sea water., , Question 9:, Is it safe for the electrician to carry out electrical repairs outdoors during heavy, downpour? Explain., , Answer 9:, No it is very risky and unsafe to carry out electric repairs outdoors during heavy, downpour. Water (when impure) is a good conductor of electricity and there are chances, of getting electric shock., , 3

Page 4 :
Question 10:, Paheli had heard that rainwater is as good as distilled water. So she collected some, rainwater in a clean glass tumbler and tested it using a tester. To her surprise she found, that the compass needle showed deflection. What could be the reasons?, , Answer 10:, Air in our surroundings contains gasses, suspended dust particles and pollutants. These, particles gets dissolved in rain water and make it good conducting medium of electricity., , Question 11:, Prepare a list of objects around you that are electroplated., , Answer 11:, Cold drink cans are tin plated. Artificial Jewellery items are silver or gold-plated. Car, bumpers and cycle handles are chromium plated. Metal doors, door handles are zinc, plated., , Question 12:, The process that you saw in Activity 14.7 is used for purification of copper. A thin plate, of pure copper and a thick rod of impure copper are used as electrodes. Copper from, impure rod is sought to be transferred to the thin copper plate. Which electrode should, be attached to the positive terminal of battery and why?, , Answer 12:, Impure Copper plate should be connected to positive terminal. Pure copper plate should, be connected to negative terminal of electrode as copper ions are positively charged and, will attract to negative electrode terminal., , 4