Page 1 :
Physics, , Chapter Six, , ELECTROMAGNETIC, INDUCTION, , 6.1 INTRODUCTION, , 204, , Electricity and magnetism were considered separate and unrelated, phenomena for a long time. In the early decades of the nineteenth century,, experiments on electric current by Oersted, Ampere and a few others, established the fact that electricity and magnetism are inter-related. They, found that moving electric charges produce magnetic fields. For example,, an electric current deflects a magnetic compass needle placed in its vicinity., This naturally raises the questions like: Is the converse effect possible?, Can moving magnets produce electric currents? Does the nature permit, such a relation between electricity and magnetism? The answer is, resounding yes! The experiments of Michael Faraday in England and, Joseph Henry in USA, conducted around 1830, demonstrated, conclusively that electric currents were induced in closed coils when, subjected to changing magnetic fields. In this chapter, we will study the, phenomena associated with changing magnetic fields and understand, the underlying principles. The phenomenon in which electric current is, generated by varying magnetic fields is appropriately called, electromagnetic induction., When Faraday first made public his discovery that relative motion, between a bar magnet and a wire loop produced a small current in the, latter, he was asked, “What is the use of it?” His reply was: “What is the, use of a new born baby?” The phenomenon of electromagnetic induction, 2021–22

Page 2 :
Electromagnetic, Induction, is not merely of theoretical or academic interest but also, of practical utility. Imagine a world where there is no, electricity – no electric lights, no trains, no telephones and, no personal computers. The pioneering experiments of, Faraday and Henry have led directly to the development, of modern day generators and transformers. Today’s, civilisation owes its progress to a great extent to the, discovery of electromagnetic induction., , OF, , FARADAY, , AND, , The discovery and understanding of electromagnetic, induction are based on a long series of experiments carried, out by Faraday and Henry. We shall now describe some, of these experiments., , Experiment 6.1, Figure 6.1 shows a coil C1* connected to a galvanometer, G. When the North-pole of a bar magnet is pushed, towards the coil, the pointer in the galvanometer deflects,, indicating the presence of electric current in the coil. The, deflection lasts as long as the bar magnet is in motion., The galvanometer does not show any deflection when the, magnet is held stationary. When the magnet is pulled, away from the coil, the galvanometer shows deflection in, the opposite direction, which indicates reversal of the, current’s direction. Moreover, when the South-pole of, the bar magnet is moved towards or away from the, coil, the deflections in the galvanometer are opposite, to that observed with the North-pole for similar, movements. Further, the deflection (and hence current), is found to be larger when the magnet is pushed, towards or pulled away from the coil faster. Instead,, when the bar magnet is held fixed and the coil C1 is, moved towards or away from the magnet, the same, effects are observed. It shows that it is the relative, motion between the magnet and the coil that is, responsible for generation (induction) of electric, current in the coil., , Experiment 6.2, In Fig. 6.2 the bar magnet is replaced by a second coil, C2 connected to a battery. The steady current in the, coil C2 produces a steady magnetic field. As coil C2 is, , Josheph Henry [1797 –, 1878] American experimental, physicist, professor at, Princeton University and first, director of the Smithsonian, Institution. He made important, improvements in electromagnets by winding coils of, insulated wire around iron, pole pieces and invented an, electromagnetic motor and a, new, efficient telegraph. He, discoverd self-induction and, investigated how currents in, one circuit induce currents in, another., , FIGURE 6.1 When the bar magnet is, pushed towards the coil, the pointer in, the galvanometer G deflects., , * Wherever the term ‘coil’ or ‘loop’ is used, it is assumed that they are made up of, conducting material and are prepared using wires which are coated with insulating, material., 2021–22, , JOSEPH HENRY (1797 – 1878), , 6.2 THE EXPERIMENTS, HENRY, , 205

Page 3 :
Physics, moved towards the coil C1, the galvanometer shows a, deflection. This indicates that electric current is induced in, coil C1. When C2 is moved away, the galvanometer shows a, deflection again, but this time in the opposite direction. The, deflection lasts as long as coil C2 is in motion. When the coil, C2 is held fixed and C1 is moved, the same effects are observed., Again, it is the relative motion between the coils that induces, the electric current., , Experiment 6.3, , FIGURE 6.2 Current is, induced in coil C1 due to motion, of the current carrying coil C2., , The above two experiments involved relative motion between, a magnet and a coil and between two coils, respectively., Through another experiment, Faraday showed that this, relative motion is not an absolute requirement. Figure 6.3, shows two coils C1 and C2 held stationary. Coil C1 is connected, to galvanometer G while the second coil C2 is connected to a, battery through a tapping key K., , FIGURE 6.3 Experimental set-up for Experiment 6.3., , It is observed that the galvanometer shows a momentary deflection, when the tapping key K is pressed. The pointer in the galvanometer returns, to zero immediately. If the key is held pressed continuously, there is no, deflection in the galvanometer. When the key is released, a momentory, deflection is observed again, but in the opposite direction. It is also observed, that the deflection increases dramatically when an iron rod is inserted, into the coils along their axis., , 6.3 MAGNETIC FLUX, , 206, , Faraday’s great insight lay in discovering a simple mathematical relation, to explain the series of experiments he carried out on electromagnetic, induction. However, before we state and appreciate his laws, we must get, familiar with the notion of magnetic flux, Φ B. Magnetic flux is defined in, the same way as electric flux is defined in Chapter 1. Magnetic flux through, 2021–22

Page 4 :
Electromagnetic, Induction, a plane of area A placed in a uniform magnetic field B (Fig. 6.4) can, be written as, Φ B = B . A = BA cos θ, (6.1), where θ is angle between B and A. The notion of the area as a vector, has been discussed earlier in Chapter 1. Equation (6.1) can be, extended to curved surfaces and nonuniform fields., If the magnetic field has different magnitudes and directions at, various parts of a surface as shown in Fig. 6.5, then the magnetic, flux through the surface is given by, , Φ = B . dA + B . dA + ... =, B, , 1, , 1, , 2, , 2, , ∑ Bi . dA i, , (6.2), , all, , where ‘all’ stands for summation over all the area elements dAi, comprising the surface and Bi is the magnetic field at the area element, dAi. The SI unit of magnetic flux is weber (Wb) or tesla meter, squared (T m2). Magnetic flux is a scalar quantity., , 6.4 FARADAY’S LAW, , OF, , FIGURE 6.4 A plane of, surface area A placed in a, uniform magnetic field B., , INDUCTION, , From the experimental observations, Faraday arrived at a, conclusion that an emf is induced in a coil when magnetic flux, through the coil changes with time. Experimental observations, discussed in Section 6.2 can be explained using this concept., The motion of a magnet towards or away from coil C1 in, Experiment 6.1 and moving a current-carrying coil C2 towards, or away from coil C1 in Experiment 6.2, change the magnetic, flux associated with coil C1. The change in magnetic flux induces, emf in coil C1. It was this induced emf which caused electric, FIGURE 6.5 Magnetic field Bi, current to flow in coil C1 and through the galvanometer. A, at the i th area element. dAi, plausible explanation for the observations of Experiment 6.3 is, represents, area vector of the, as follows: When the tapping key K is pressed, the current in, i th area element., coil C2 (and the resulting magnetic field) rises from zero to a, maximum value in a short time. Consequently, the magnetic, flux through the neighbouring coil C1 also increases. It is the change in, magnetic flux through coil C1 that produces an induced emf in coil C1., When the key is held pressed, current in coil C2 is constant. Therefore,, there is no change in the magnetic flux through coil C1 and the current in, coil C1 drops to zero. When the key is released, the current in C2 and the, resulting magnetic field decreases from the maximum value to zero in a, short time. This results in a decrease in magnetic flux through coil C1, and hence again induces an electric current in coil C1*. The common, point in all these observations is that the time rate of change of magnetic, flux through a circuit induces emf in it. Faraday stated experimental, observations in the form of a law called Faraday’s law of electromagnetic, induction. The law is stated below., * Note that sensitive electrical instruments in the vicinity of an electromagnet, can be damaged due to the induced emfs (and the resulting currents) when the, electromagnet is turned on or off., 2021–22, , 207

Page 5 :
Physics, The magnitude of the induced emf in a circuit is equal, to the time rate of change of magnetic flux through the, circuit., Mathematically, the induced emf is given by, , MICHAEL FARADAY (1791–1867), , ε=–, , Michael Faraday [1791–, 1867], Faraday made, numerous contributions to, science, viz., the discovery, of, electromagnetic, induction, the laws of, electrolysis, benzene, and, the fact that the plane of, polarisation is rotated in an, electric field. He is also, credited with the invention, of the electric motor, the, electric generator and the, transformer. He is widely, regarded as the greatest, experimental scientist of, the nineteenth century., , dΦB, dt, , (6.3), , The negative sign indicates the direction of ε and hence, the direction of current in a closed loop. This will be, discussed in detail in the next section., In the case of a closely wound coil of N turns, change, of flux associated with each turn, is the same. Therefore,, the expression for the total induced emf is given by, , ε = –N, , dΦB, dt, , (6.4), , The induced emf can be increased by increasing the, number of turns N of a closed coil., From Eqs. (6.1) and (6.2), we see that the flux can be, varied by changing any one or more of the terms B, A and, θ. In Experiments 6.1 and 6.2 in Section 6.2, the flux is, changed by varying B. The flux can also be altered by, changing the shape of a coil (that is, by shrinking it or, stretching it) in a magnetic field, or rotating a coil in a, magnetic field such that the angle θ between B and A, changes. In these cases too, an emf is induced in the, respective coils., , 208, , EXAMPLE 6.2, , EXAMPLE 6.1, , Example 6.1 Consider Experiment 6.2. (a) What would you do to obtain, a large deflection of the galvanometer? (b) How would you demonstrate, the presence of an induced current in the absence of a galvanometer?, Solution, (a) To obtain a large deflection, one or more of the following steps can, be taken: (i) Use a rod made of soft iron inside the coil C2, (ii) Connect, the coil to a powerful battery, and (iii) Move the arrangement rapidly, towards the test coil C1., (b) Replace the galvanometer by a small bulb, the kind one finds in a, small torch light. The relative motion between the two coils will cause, the bulb to glow and thus demonstrate the presence of an induced, current., In experimental physics one must learn to innovate. Michael Faraday, who is ranked as one of the best experimentalists ever, was legendary, for his innovative skills., Example 6.2 A square loop of side 10 cm and resistance 0.5 Ω is, placed vertically in the east-west plane. A uniform magnetic field of, 0.10 T is set up across the plane in the north-east direction. The, magnetic field is decreased to zero in 0.70 s at a steady rate. Determine, the magnitudes of induced emf and current during this time-interval., , 2021–22

Page 6 :
Electromagnetic, Induction, Solution The angle θ made by the area vector of the coil with the, magnetic field is 45°. From Eq. (6.1), the initial magnetic flux is, , Φ = BA cos θ, =, , 0.1 × 10 –2, Wb, 2, , Final flux, Φmin = 0, The change in flux is brought about in 0.70 s. From Eq. (6.3), the, magnitude of the induced emf is given by, , ε=, , ∆ΦB, , =, , ∆t, , (Φ – 0 ), ∆t, , =, , 10 –3, = 1.0 mV, 2 × 0.7, , And the magnitude of the current is, =, , EXAMPLE 6.2, , ε, , 10 –3 V, = 2 mA, R, 0.5Ω, Note that the earth’s magnetic field also produces a flux through the, loop. But it is a steady field (which does not change within the time, span of the experiment) and hence does not induce any emf., I =, , Example 6.3, A circular coil of radius 10 cm, 500 turns and resistance 2 Ω is placed, with its plane perpendicular to the horizontal component of the earth’s, magnetic field. It is rotated about its vertical diameter through 180°, in 0.25 s. Estimate the magnitudes of the emf and current induced in, the coil. Horizontal component of the earth’s magnetic field at the, place is 3.0 × 10–5 T., Solution, Initial flux through the coil,, ΦB (initial) = BA cos θ, = 3.0 × 10–5 × (π ×10–2) × cos 0°, = 3π × 10–7 Wb, Final flux after the rotation,, , ΦB (final) = 3.0 × 10–5 × (π ×10–2) × cos 180°, = –3π × 10–7 Wb, Therefore, estimated value of the induced emf is,, , ε=N, , ∆Φ, ∆t, , = 500 × (6π × 10–7)/0.25, I = ε/R = 1.9 × 10–3 A, Note that the magnitudes of ε and I are the estimated values. Their, instantaneous values are different and depend upon the speed of, rotation at the particular instant., , 2021–22, , EXAMPLE 6.3, , = 3.8 × 10–3 V, , 209

Page 7 :
Physics, 6.5 LENZ’S LAW, , AND, , CONSERVATION, , OF, , ENERGY, , In 1834, German physicist Heinrich Friedrich Lenz (1804-1865) deduced, a rule, known as Lenz’s law which gives the polarity of the induced emf, in a clear and concise fashion. The statement of the law is:, The polarity of induced emf is such that it tends to produce a current, which opposes the change in magnetic flux that produced it., The negative sign shown in Eq. (6.3) represents this effect. We can, understand Lenz’s law by examining Experiment 6.1 in Section 6.2.1. In, Fig. 6.1, we see that the North-pole of a bar magnet is being pushed, towards the closed coil. As the North-pole of the bar magnet moves towards, the coil, the magnetic flux through the coil increases. Hence current is, induced in the coil in such a direction that it opposes the increase in flux., This is possible only if the current in the coil is in a counter-clockwise, direction with respect to an observer situated on the side of the magnet., Note that magnetic moment associated with this current has North polarity, towards the North-pole of the approaching magnet. Similarly, if the Northpole of the magnet is being withdrawn from the coil, the magnetic flux, through the coil will decrease. To counter this decrease in magnetic flux,, the induced current in the coil flows in clockwise direction and its Southpole faces the receding North-pole of the bar magnet. This would result in, an attractive force which opposes the motion of the magnet and the, corresponding decrease in flux., What will happen if an open circuit is used in place of the closed loop, in the above example? In this case too, an emf is induced across the open, ends of the circuit. The direction of the induced emf can be found, using Lenz’s law. Consider Figs. 6.6 (a) and (b). They provide an easier, way to understand the direction of induced currents. Note that the, direction shown by, , FIGURE 6.6, Illustration of, Lenz’s law., , 210, , and, , indicate the directions of the induced, , currents., A little reflection on this matter should convince us on the, correctness of Lenz’s law. Suppose that the induced current was in, the direction opposite to the one depicted in Fig. 6.6(a). In that case,, the South-pole due to the induced current will face the approaching, North-pole of the magnet. The bar magnet will then be attracted, towards the coil at an ever increasing acceleration. A gentle push on, the magnet will initiate the process and its velocity and kinetic energy, will continuously increase without expending any energy. If this can, happen, one could construct a perpetual-motion machine by a, suitable arrangement. This violates the law of conservation of energy, and hence can not happen., Now consider the correct case shown in Fig. 6.6(a). In this situation,, the bar magnet experiences a repulsive force due to the induced, current. Therefore, a person has to do work in moving the magnet., Where does the energy spent by the person go? This energy is, dissipated by Joule heating produced by the induced current., 2021–22

Page 8 :
Electromagnetic, Induction, Example 6.4, Figure 6.7 shows planar loops of different shapes moving out of or, into a region of a magnetic field which is directed normal to the plane, of the loop away from the reader. Determine the direction of induced, current in each loop using Lenz’s law., , FIGURE 6.7, , Solution, (i) The magnetic flux through the rectangular loop abcd increases,, due to the motion of the loop into the region of magnetic field, The, induced current must flow along the path bcdab so that it opposes, the increasing flux., (ii) Due to the outward motion, magnetic flux through the triangular, loop abc decreases due to which the induced current flows along, bacb, so as to oppose the change in flux., (iii) As the magnetic flux decreases due to motion of the irregular, shaped loop abcd out of the region of magnetic field, the induced, current flows along cdabc, so as to oppose change in flux., Note that there are no induced current as long as the loops are, completely inside or outside the region of the magnetic field., , EXAMPLE 6.4, , Example 6.5, (a) A closed loop is held stationary in the magnetic field between the, north and south poles of two permanent magnets held fixed. Can, we hope to generate current in the loop by using very strong, magnets?, (b) A closed loop moves normal to the constant electric field between, the plates of a large capacitor. Is a current induced in the loop, (i) when it is wholly inside the region between the capacitor plates, (ii) when it is partially outside the plates of the capacitor? The, electric field is normal to the plane of the loop., (c) A rectangular loop and a circular loop are moving out of a uniform, magnetic field region (Fig. 6.8) to a field-free region with a constant, velocity v. In which loop do you expect the induced emf to be, constant during the passage out of the field region? The field is, normal to the loops., , EXAMPLE 6.5, , 2021–22, , 211

Page 9 :
Physics, , FIGURE 6.8, , (d) Predict the polarity of the capacitor in the situation described by, Fig. 6.9., , EXAMPLE 6.5, , FIGURE 6.9, , Solution, (a) No. However strong the magnet may be, current can be induced, only by changing the magnetic flux through the loop., (b) No current is induced in either case. Current can not be induced, by changing the electric flux., (c) The induced emf is expected to be constant only in the case of the, rectangular loop. In the case of circular loop, the rate of change of, area of the loop during its passage out of the field region is not, constant, hence induced emf will vary accordingly., (d) The polarity of plate ‘A’ will be positive with respect to plate ‘B’ in, the capacitor., , 6.6 MOTIONAL ELECTROMOTIVE FORCE, Let us consider a straight conductor moving in a uniform and timeindependent magnetic field. Figure 6.10 shows a rectangular conductor, PQRS in which the conductor PQ is free to move. The rod PQ is moved, towards the left with a constant velocity v as, shown in the figure. Assume that there is no, loss of energy due to friction. PQRS forms a, closed circuit enclosing an area that changes, as PQ moves. It is placed in a uniform magnetic, field B which is perpendicular to the plane of, this system. If the length RQ = x and RS = l, the, magnetic flux ΦB enclosed by the loop PQRS, will be, , ΦB = Blx, Since x is changing with time, the rate of change, of flux ΦB will induce an emf given by:, FIGURE 6.10 The arm PQ is moved to the left, side, thus decreasing the area of the, rectangular loop. This movement, induces a current I as shown., , 212, 2021–22, , ε=, , – dΦB, d, = –, (Blx ), dt, dt, , = – Bl, , dx, = Blv, dt, , (6.5)

Page 10 :
Electromagnetic, Induction, , W = qvBl, Since emf is the work done per unit charge,, , ε =, , W, q, , = Blv, This equation gives emf induced across the rod PQ and is identical, to Eq. (6.5). We stress that our presentation is not wholly rigorous. But, it does help us to understand the basis of Faraday’s law when, the conductor is moving in a uniform and time-independent, magnetic field., On the other hand, it is not obvious how an emf is induced when a, conductor is stationary and the magnetic field is changing – a fact which, Faraday verified by numerous experiments. In the case of a stationary, conductor, the force on its charges is given by, F = q (E + v × B) = qE, , (6.6), , since v = 0. Thus, any force on the charge must arise from the electric, field term E alone. Therefore, to explain the existence of induced emf or, induced current, we must assume that a time-varying magnetic field, generates an electric field. However, we hasten to add that electric fields, produced by static electric charges have properties different from those, produced by time-varying magnetic fields. In Chapter 4, we learnt that, charges in motion (current) can exert force/torque on a stationary magnet., Conversely, a bar magnet in motion (or more generally, a changing, magnetic field) can exert a force on the stationary charge. This is the, fundamental significance of the Faraday’s discovery. Electricity and, magnetism are related., , 2021–22, , EXAMPLE 6.6, , Example 6.6 A metallic rod of 1 m length is rotated with a frequency, of 50 rev/s, with one end hinged at the centre and the other end at the, circumference of a circular metallic ring of radius 1 m, about an axis, passing through the centre and perpendicular to the plane of the ring, (Fig. 6.11). A constant and uniform magnetic field of 1 T parallel to the, axis is present everywhere. What is the emf between the centre and, the metallic ring?, , Interactive animation on motional emf:, , http://ngsir.netfirms.com/englishhtm/Induction.htm, http://webphysics.davidson.edu/physlet_resources/bu_semester2/index.html, , where we have used dx/dt = –v which is the speed of the conductor PQ., The induced emf Blv is called motional emf. Thus, we are able to produce, induced emf by moving a conductor instead of varying the magnetic field,, that is, by changing the magnetic flux enclosed by the circuit., It is also possible to explain the motional emf expression in Eq. (6.5), by invoking the Lorentz force acting on the free charge carriers of conductor, PQ. Consider any arbitrary charge q in the conductor PQ. When the rod, moves with speed v, the charge will also be moving with speed v in the, magnetic field B. The Lorentz force on this charge is qvB in magnitude,, and its direction is towards Q. All charges experience the same force, in, magnitude and direction, irrespective of their position in the rod PQ., The work done in moving the charge from P to Q is,, , 213

Page 11 :
Physics, , FIGURE 6.11, , Solution, Method I, As the rod is rotated, free electrons in the rod move towards the outer, end due to Lorentz force and get distributed over the ring. Thus, the, resulting separation of charges produces an emf across the ends of, the rod. At a certain value of emf, there is no more flow of electrons, and a steady state is reached. Using Eq. (6.5), the magnitude of the, emf generated across a length dr of the rod as it moves at right angles, to the magnetic field is given by, dε = Bv dr . Hence,, R, , R, , 0, , 0, , ε = ∫ dε = ∫ Bv dr = ∫ B ωr dr =, , B ωR 2, 2, , Note that we have used v = ω r. This gives, 1, × 1.0 × 2π × 50 × (12 ), 2, = 157 V, , ε =, , Method II, To calculate the emf, we can imagine a closed loop OPQ in which, point O and P are connected with a resistor R and OQ is the rotating, rod. The potential difference across the resistor is then equal to the, induced emf and equals B × (rate of change of area of loop). If θ is the, angle between the rod and the radius of the circle at P at time t, the, area of the sector OPQ is given by, , θ, , 1 2, R θ, 2π 2, where R is the radius of the circle. Hence, the induced emf is, , 214, , EXAMPLE 6.6, , π R2 ×, , ε =B ×, , =, , d 1 2 , 1, Bω R 2, 2 dθ, R, θ, BR, =, =, , dt  2, 2, dt, 2, , dθ, = ω = 2 πν ], dt, This expression is identical to the expression obtained by Method I, and we get the same value of ε., , [Note:, , 2021–22

Page 12 :
Electromagnetic, Induction, Example 6.7, A wheel with 10 metallic spokes each 0.5 m long is rotated with a, speed of 120 rev/min in a plane normal to the horizontal component, of earth’s magnetic field HE at a place. If HE = 0.4 G at the place, what, is the induced emf between the axle and the rim of the wheel? Note, that 1 G = 10–4 T., Solution, Induced emf = (1/2) ω B R2, = 6.28 × 10–5 V, The number of spokes is immaterial because the emf’s across the, spokes are in parallel., , EXAMPLE 6.7, , = (1/2) × 4π × 0.4 × 10–4 × (0.5)2, , 6.7 ENERGY CONSIDERATION: A QUANTITATIVE STUDY, In Section 6.5, we discussed qualitatively that Lenz’s law is consistent with, the law of conservation of energy. Now we shall explore this aspect further, with a concrete example., Let r be the resistance of movable arm PQ of the rectangular conductor, shown in Fig. 6.10. We assume that the remaining arms QR, RS and SP, have negligible resistances compared to r. Thus, the overall resistance of, the rectangular loop is r and this does not change as PQ is moved. The, current I in the loop is,, ε, I =, r, Bl v, =, (6.7), r, On account of the presence of the magnetic field, there will be a force, on the arm PQ. This force I (l × B), is directed outwards in the direction, opposite to the velocity of the rod. The magnitude of this force is,, , B 2l 2v, r, where we have used Eq. (6.7). Note that this force arises due to drift velocity, of charges (responsible for current) along the rod and the consequent, Lorentz force acting on them., Alternatively, the arm PQ is being pushed with a constant speed v,, the power required to do this is,, P = Fv, F = I lB =, , B 2l 2v 2, (6.8), r, The agent that does this work is mechanical. Where does this, mechanical energy go? The answer is: it is dissipated as Joule heat, and, is given by, =, , 2, , B 2l 2v 2,  Blv ,  r =, r, r, which is identical to Eq. (6.8)., PJ = I 2r = , , , 215, 2021–22

Page 13 :
Physics, Thus, mechanical energy which was needed to move the arm PQ is, converted into electrical energy (the induced emf) and then to thermal energy., There is an interesting relationship between the charge flow through, the circuit and the change in the magnetic flux. From Faraday’s law, we, have learnt that the magnitude of the induced emf is,, ∆ΦB, ∆t, However,, , ε =, , ε = Ir =, , ∆Q, r, ∆t, , Thus,, ∆Q =, , ∆ΦB, r, , Example 6.8 Refer to Fig. 6.12(a). The arm PQ of the rectangular, conductor is moved from x = 0, outwards. The uniform magnetic field is, perpendicular to the plane and extends from x = 0 to x = b and is zero, for x > b. Only the arm PQ possesses substantial resistance r. Consider, the situation when the arm PQ is pulled outwards from x = 0 to x = 2b,, and is then moved back to x = 0 with constant speed v. Obtain expressions, for the flux, the induced emf, the force necessary to pull the arm and the, power dissipated as Joule heat. Sketch the variation of these quantities, with distance., , (a), FIGURE 6.12, , Solution Let us first consider the forward motion from x = 0 to x = 2b, The flux ΦB linked with the circuit SPQR is, , 216, , EXAMPLE 6.8, , ΦB = B l x, = Bl b, , 0≤x <b, b ≤ x < 2b, , The induced emf is,, dΦ, ε=− B, dt, = − Bl v, 0≤ x <b, =0, , b ≤ x < 2b, 2021–22

Page 14 :
Electromagnetic, Induction, When the induced emf is non-zero, the current I is (in magnitude), Bl v, r, , I =, , (b), FIGURE 6.12, , The force required to keep the arm PQ in constant motion is I l B. Its, direction is to the left. In magnitude, B 2l 2v, 0≤ x <b, r, =0, b ≤ x < 2b, The Joule heating loss is, F =, , PJ = I 2r, 0≤x <b, b ≤ x < 2b, , One obtains similar expressions for the inward motion from x = 2b to, x = 0. One can appreciate the whole process by examining the sketch, of various quantities displayed in Fig. 6.12(b)., 2021–22, , EXAMPLE 6.8, , B 2l 2v 2, r, =0, =, , 217

Page 15 :
Physics, 6.8 EDDY CURRENTS, So far we have studied the electric currents induced in well defined paths, in conductors like circular loops. Even when bulk pieces of conductors, are subjected to changing magnetic flux, induced currents, are produced in them. However, their flow patterns resemble, swirling eddies in water. This effect was discovered by physicist, Foucault (1819-1868) and these currents are called eddy, currents., Consider the apparatus shown in Fig. 6.13. A copper plate, is allowed to swing like a simple pendulum between the pole, pieces of a strong magnet. It is found that the motion is damped, and in a little while the plate comes to a halt in the magnetic, field. We can explain this phenomenon on the basis of, electromagnetic induction. Magnetic flux associated with the, plate keeps on changing as the plate moves in and out of the, region between magnetic poles. The flux change induces eddy, currents in the plate. Directions of eddy currents are opposite, when the plate swings into the region between the poles and, when it swings out of the region., If rectangular slots are made in the copper plate as shown, FIGURE 6.13 Eddy currents are in Fig. 6.14, area available to the flow of eddy currents is less., Thus, the pendulum plate with holes or slots reduces, generated in the copper plate,, while entering, electromagnetic damping and the plate swings more freely., and leaving the region of, Note that magnetic moments of the induced currents (which, magnetic field., oppose the motion) depend upon the area enclosed by the, currents (recall equation m = I A in Chapter 4)., This fact is helpful in reducing eddy currents in the metallic, cores of transformers, electric motors and other such devices in, which a coil is to be wound over metallic core. Eddy currents are, undesirable since they heat up the core and dissipate electrical, energy in the form of heat. Eddy currents are minimised by using, laminations of metal to make a metal core. The laminations are, separated by an insulating material like lacquer. The plane of the, laminations must be arranged parallel to the magnetic field, so, that they cut across the eddy current paths. This arrangement, reduces the strength of the eddy currents. Since the dissipation, of electrical energy into heat depends on the square of the strength, of electric current, heat loss is substantially reduced., Eddy currents are used to advantage in certain applications like:, , FIGURE 6.14 Cutting slots, in the copper plate reduces, the effect of eddy currents., , 218, , (i) Magnetic braking in trains: Strong electromagnets are situated, above the rails in some electrically powered trains. When the, electromagnets are activated, the eddy currents induced in the, rails oppose the motion of the train. As there are no mechanical, linkages, the braking effect is smooth., (ii) Electromagnetic damping: Certain galvanometers have a fixed, core made of nonmagnetic metallic material. When the coil, oscillates, the eddy currents generated in the core oppose the, motion and bring the coil to rest quickly., 2021–22

Page 16 :
Electromagnetic, Induction, (iii) Induction furnace: Induction furnace can be used to produce high, temperatures and can be utilised to prepare alloys, by melting the, constituent metals. A high frequency alternating current is passed, through a coil which surrounds the metals to be melted. The eddy, currents generated in the metals produce high temperatures sufficient, to melt it., (iv) Electric power meters: The shiny metal disc in the electric power meter, (analogue type) rotates due to the eddy currents. Electric currents, are induced in the disc by magnetic fields produced by sinusoidally, varying currents in a coil., You can observe the rotating shiny disc in the power meter of your, house., , ELECTROMAGNETIC DAMPING, Take two hollow thin cylindrical pipes of equal internal diameters made of aluminium and, PVC, respectively. Fix them vertically with clamps on retort stands. Take a small cylinderical, magnet having diameter slightly smaller than the inner diameter of the pipes and drop it, through each pipe in such a way that the magnet does not touch the sides of the pipes, during its fall. You will observe that the magnet dropped through the PVC pipe takes the, same time to come out of the pipe as it would take when dropped through the same height, without the pipe. Note the time it takes to come out of the pipe in each case. You will see that, the magnet takes much longer time in the case of aluminium pipe. Why is it so? It is due to, the eddy currents that are generated in the aluminium pipe which oppose the change in, magnetic flux, i.e., the motion of the magnet. The retarding force due to the eddy currents, inhibits the motion of the magnet. Such phenomena are referred to as electromagnetic damping., Note that eddy currents are not generated in PVC pipe as its material is an insulator whereas, aluminium is a conductor., , 6.9 INDUCTANCE, An electric current can be induced in a coil by flux change produced by, another coil in its vicinity or flux change produced by the same coil. These, two situations are described separately in the next two sub-sections., However, in both the cases, the flux through a coil is proportional to the, current. That is, ΦB α I., Further, if the geometry of the coil does not vary with time then,, dΦB, dI, ∝, dt, dt, For a closely wound coil of N turns, the same magnetic flux is linked, with all the turns. When the flux ΦB through the coil changes, each turn, contributes to the induced emf. Therefore, a term called flux linkage is, used which is equal to NΦB for a closely wound coil and in such a case, , NΦB ∝ I, The constant of proportionality, in this relation, is called inductance., We shall see that inductance depends only on the geometry of the coil, 2021–22, , 219

Page 17 :
Physics, and intrinsic material properties. This aspect is akin to capacitance which, for a parallel plate capacitor depends on the plate area and plate separation, (geometry) and the dielectric constant K of the intervening medium, (intrinsic material property)., Inductance is a scalar quantity. It has the dimensions of [M L2 T –2 A–2], given by the dimensions of flux divided by the dimensions of current. The, SI unit of inductance is henry and is denoted by H. It is named in honour, of Joseph Henry who discovered electromagnetic induction in USA,, independently of Faraday in England., , 6.9.1 Mutual inductance, Consider Fig. 6.15 which shows two long co-axial solenoids each of length, l. We denote the radius of the inner solenoid S1 by r1 and the number of, turns per unit length by n1. The corresponding quantities for the outer, solenoid S2 are r2 and n2, respectively. Let N1 and N2 be the total number, of turns of coils S1 and S2, respectively., When a current I2 is set up through S2, it in turn sets up a magnetic, flux through S1. Let us denote it by Φ1. The corresponding flux linkage, with solenoid S1 is, N1 Φ1 = M 12 I 2, (6.9), M12 is called the mutual inductance of solenoid S1 with respect to, solenoid S2. It is also referred to as the coefficient of mutual induction., For these simple co-axial solenoids it is possible to calculate M12. The, magnetic field due to the current I2 in S2 is µ0n2I2. The resulting flux linkage, with coil S1 is,, , ( ) (µ n I ), , N1Φ1 = (n1l ) πr12, , 0, , 2 2, , = µ0n1n 2 πr12l I 2, , (6.10), where n1l is the total number of turns in solenoid S1. Thus, from Eq. (6.9), and Eq. (6.10),, M12 = µ0n1n2πr 12l, , (6.11), , Note that we neglected the edge effects and considered, the magnetic field µ0n2I2 to be uniform throughout the, length and width of the solenoid S2. This is a good, approximation keeping in mind that the solenoid is long,, implying l >> r2., We now consider the reverse case. A current I1 is, passed through the solenoid S1 and the flux linkage with, coil S2 is,, N2Φ2 = M21 I1, , (6.12), , M21 is called the mutual inductance of solenoid S2 with, respect to solenoid S1., FIGURE 6.15 Two long co-axial, solenoids of same, length l., , 220, , The flux due to the current I1 in S1 can be assumed to, be confined solely inside S1 since the solenoids are very, long. Thus, flux linkage with solenoid S2 is, , ( ) (µ n I ), , N 2Φ2 = (n 2l ) πr12, 2021–22, , 0, , 1 1

Page 18 :
Electromagnetic, Induction, where n2l is the total number of turns of S2. From Eq. (6.12),, M21 = µ0n1n2πr 21 l, , (6.13), , Using Eq. (6.11) and Eq. (6.12), we get, M12 = M21= M (say), , (6.14), , We have demonstrated this equality for long co-axial solenoids., However, the relation is far more general. Note that if the inner solenoid, was much shorter than (and placed well inside) the outer solenoid, then, we could still have calculated the flux linkage N1Φ1 because the inner, solenoid is effectively immersed in a uniform magnetic field due to the, outer solenoid. In this case, the calculation of M12 would be easy. However,, it would be extremely difficult to calculate the flux linkage with the outer, solenoid as the magnetic field due to the inner solenoid would vary across, the length as well as cross section of the outer solenoid. Therefore, the, calculation of M21 would also be extremely difficult in this case. The, equality M12=M21 is very useful in such situations., We explained the above example with air as the medium within the, solenoids. Instead, if a medium of relative permeability µr had been present,, the mutual inductance would be, M =µr µ0 n1n2π r12 l, It is also important to know that the mutual inductance of a pair of, coils, solenoids, etc., depends on their separation as well as their relative, orientation., Example 6.9 Two concentric circular coils, one of small radius r1 and, the other of large radius r2, such that r1 << r2, are placed co-axially, with centres coinciding. Obtain the mutual inductance of the, arrangement., Solution Let a current I2 flow through the outer circular coil. The, field at the centre of the coil is B 2 = µ 0I 2 / 2r2. Since the other, co-axially placed coil has a very small radius, B2 may be considered, constant over its cross-sectional area. Hence,, Φ1 = πr 12B2, , =, , µ0 πr12, 2r2, , I2, , = M12 I2, Thus,, , M12 =, , µ0 πr12, 2r2, , From Eq. (6.14), , µ0 π r12, 2 r2, , Note that we calculated M12 from an approximate value of Φ1, assuming, the magnetic field B2 to be uniform over the area π r12. However, we, can accept this value because r1 << r2., , 2021–22, , EXAMPLE 6.9, , M12 = M 21 =, , 221

Page 19 :
Physics, Now, let us recollect Experiment 6.3 in Section 6.2. In that experiment,, emf is induced in coil C1 wherever there was any change in current through, coil C2. Let Φ1 be the flux through coil C1 (say of N1 turns) when current in, coil C2 is I2., Then, from Eq. (6.9), we have, N1Φ1 = MI2, For currents varrying with time,, , d ( N 1Φ1 ), , =, , d ( MI 2 ), , dt, dt, Since induced emf in coil C1 is given by, , ε1 = –, , d ( N 1Φ1 ), dt, , We get,, dI 2, dt, It shows that varying current in a coil can induce emf in a neighbouring, coil. The magnitude of the induced emf depends upon the rate of change, of current and mutual inductance of the two coils., , ε1 = – M, , 6.9.2 Self-inductance, In the previous sub-section, we considered the flux in one solenoid due, to the current in the other. It is also possible that emf is induced in a, single isolated coil due to change of flux through the coil by means of, varying the current through the same coil. This phenomenon is called, self-induction. In this case, flux linkage through a coil of N turns is, proportional to the current through the coil and is expressed as, , N ΦB ∝ I, N ΦB = L I, (6.15), where constant of proportionality L is called self-inductance of the coil. It, is also called the coefficient of self-induction of the coil. When the current, is varied, the flux linked with the coil also changes and an emf is induced, in the coil. Using Eq. (6.15), the induced emf is given by, , ε=–, , d ( N ΦB ), dt, , dI, (6.16), dt, Thus, the self-induced emf always opposes any change (increase or, decrease) of current in the coil., It is possible to calculate the self-inductance for circuits with simple, geometries. Let us calculate the self-inductance of a long solenoid of crosssectional area A and length l, having n turns per unit length. The magnetic, field due to a current I flowing in the solenoid is B = µ0 n I (neglecting edge, effects, as before). The total flux linked with the solenoid is, , ε = –L, , 222, , N ΦB = (nl ) ( µ0n I ) ( A ), 2021–22

Page 20 :
Electromagnetic, Induction, = µ 0n 2 Al I, , where nl is the total number of turns. Thus, the self-inductance is,, L =, , ΝΦΒ, I, , = µ0n 2 Al, , (6.17), , If we fill the inside of the solenoid with a material of relative permeability, µr (for example soft iron, which has a high value of relative permeability),, then,, , L = µr µ0 n 2 Al, , (6.18), , The self-inductance of the coil depends on its geometry and on the, permeability of the medium., The self-induced emf is also called the back emf as it opposes any, change in the current in a circuit. Physically, the self-inductance plays, the role of inertia. It is the electromagnetic analogue of mass in mechanics., So, work needs to be done against the back emf (ε ) in establishing the, current. This work done is stored as magnetic potential energy. For the, current I at an instant in a circuit, the rate of work done is, dW, = εI, dt, If we ignore the resistive losses and consider only inductive effect,, then using Eq. (6.16),, , dW, dI, =L I, dt, dt, Total amount of work done in establishing the current I is, I, , W = ∫ dW = ∫ L I dI, 0, , Thus, the energy required to build up the current I is,, 1 2, (6.19), LI, 2, This expression reminds us of mv 2/2 for the (mechanical) kinetic energy, of a particle of mass m, and shows that L is analogous to m (i.e., L is, electrical inertia and opposes growth and decay of current in the circuit)., Consider the general case of currents flowing simultaneously in two, nearby coils. The flux linked with one coil will be the sum of two fluxes, which exist independently. Equation (6.9) would be modified into, W =, , N1 Φ1 = M11 I1 + M12 I 2, where M11 represents inductance due to the same coil., Therefore, using Faraday’s law,, , ε1 = − M 11, , dI 1, dI, − M 12 2, dt, dt, , 223, 2021–22

Page 21 :
Physics, M11 is the self-inductance and is written as L1. Therefore,, , ε1 = − L1, , d I1, dI, − M 12 2, dt, dt, , Example 6.10 (a) Obtain the expression for the magnetic energy stored, in a solenoid in terms of magnetic field B, area A and length l of the, solenoid. (b) How does this magnetic energy compare with the, electrostatic energy stored in a capacitor?, , http://micro.magnet.fsu.edu/electromag/java/generator/ac.html, , UB =, , 1 2, LI, 2, 2, , =, , 1  B , L, 2  µ0n , , =, ,  B , 1, ( µ0n 2 Al ) , 2,  µ0n , , (since B, , = µ0 nI , for a solenoid), , 2, , [from Eq. (6.17)], , 1, B 2 Al, 2 µ0, (b) The magnetic energy per unit volume is,, =, , uB =, , UB, V, , (where V is volume that contains flux), , UB, Al, B2, =, (6.20), 2 µ0, We have already obtained the relation for the electrostatic energy, stored per unit volume in a parallel plate capacitor (refer to Chapter 2,, Eq. 2.77),, =, , EXAMPLE 6.10, , Interactive animation on ac generator:, , Solution, (a) From Eq. (6.19), the magnetic energy is, , uΕ =, , 1, ε0 E 2, 2, , (2.77), , In both the cases energy is proportional to the square of the field, strength. Equations (6.20) and (2.77) have been derived for special, cases: a solenoid and a parallel plate capacitor, respectively. But they, are general and valid for any region of space in which a magnetic field, or/and an electric field exist., , 6.10 AC GENERATOR, , 224, , The phenomenon of electromagnetic induction has been technologically, exploited in many ways. An exceptionally important application is the, generation of alternating currents (ac). The modern ac generator with a, typical output capacity of 100 MW is a highly evolved machine. In this, section, we shall describe the basic principles behind this machine. The, Yugoslav inventor Nicola Tesla is credited with the development of the, machine. As was pointed out in Section 6.3, one method to induce an emf, 2021–22

Page 22 :
Electromagnetic, Induction, or current in a loop is through a change in the, loop’s orientation or a change in its effective area., As the coil rotates in a magnetic field B, the, effective area of the loop (the face perpendicular, to the field) is A cos θ, where θ is the angle, between A and B. This method of producing a, flux change is the principle of operation of a, simple ac generator. An ac generator converts, mechanical energy into electrical energy., The basic elements of an ac generator are, shown in Fig. 6.16. It consists of a coil mounted, on a rotor shaft. The axis of rotation of the coil, is perpendicular to the direction of the magnetic, field. The coil (called armature) is mechanically, rotated in the uniform magnetic field by some, external means. The rotation of the coil causes, the magnetic flux through it to change, so an, emf is induced in the coil. The ends of the coil, are connected to an external circuit by means, FIGURE 6.16 AC Generator, of slip rings and brushes., When the coil is rotated with a constant, angular speed ω, the angle θ between the magnetic field vector B and the, area vector A of the coil at any instant t is θ = ωt (assuming θ = 0° at t = 0)., As a result, the effective area of the coil exposed to the magnetic field lines, changes with time, and from Eq. (6.1), the flux at any time t is, , ΦB = BA cos θ = BA cos ωt, From Faraday’s law, the induced emf for the rotating coil of N turns is, then,, dΦB, d, = – NBA, (cos ω t ), dt, dt, Thus, the instantaneous value of the emf is, ε = NBA ω sin ωt, (6.21), where NBAω is the maximum value of the emf, which occurs when, sin ωt = ±1. If we denote NBAω as ε0, then, , ε=–N, , ε = ε0 sin ωt, (6.22), Since the value of the sine fuction varies between +1 and –1, the sign, or, polarity of the emf changes with time. Note from Fig. 6.17 that the emf, has its extremum value when θ = 90° or θ = 270°, as the change of flux is, greatest at these points., The direction of the current changes periodically and therefore the current, is called alternating current (ac). Since ω = 2πν, Eq (6.22) can be written as, ε = ε0sin 2π ν t, (6.23), where ν is the frequency of revolution of the generator’s coil., Note that Eq. (6.22) and (6.23) give the instantaneous value of the emf, and ε varies between +ε0 and –ε0 periodically. We shall learn how to, determine the time-averaged value for the alternating voltage and current, in the next chapter., 2021–22, , 225

Page 23 :
Physics, , FIGURE 6.17 An alternating emf is generated by a loop of wire rotating in a magnetic field., , In commercial generators, the mechanical energy required for rotation, of the armature is provided by water falling from a height, for example,, from dams. These are called hydro-electric generators. Alternatively, water, is heated to produce steam using coal or other sources. The steam at, high pressure produces the rotation of the armature. These are called, thermal generators. Instead of coal, if a nuclear fuel is used, we get nuclear, power generators. Modern day generators produce electric power as high, as 500 MW, i.e., one can light up 5 million 100 W bulbs! In most, generators, the coils are held stationary and it is the electromagnets which, are rotated. The frequency of rotation is 50 Hz in India. In certain countries, such as USA, it is 60 Hz., , Example 6.11 Kamla peddles a stationary bicycle. The pedals of the, bicycle are attached to a 100 turn coil of area 0.10 m2. The coil rotates, at half a revolution per second and it is placed in a uniform magnetic, field of 0.01 T perpendicular to the axis of rotation of the coil. What is, the maximum voltage generated in the coil?, Solution Here ν = 0.5 Hz; N =100, A = 0.1 m2 and B = 0.01 T. Employing, Eq. (6.21), , 226, , EXAMPLE 6.11, , ε0 = NBA (2 π ν), = 100 × 0.01 × 0.1 × 2 × 3.14 × 0.5, = 0.314 V, The maximum voltage is 0.314 V., We urge you to explore such alternative possibilities for power, generation., , 2021–22

Page 24 :
Electromagnetic, Induction, MIGRATION OF BIRDS, The migratory pattern of birds is one of the mysteries in the field of biology, and indeed all, of science. For example, every winter birds from Siberia fly unerringly to water spots in the, Indian subcontinent. There has been a suggestion that electromagnetic induction may, provide a clue to these migratory patterns. The earth’s magnetic field has existed throughout, evolutionary history. It would be of great benefit to migratory birds to use this field to, determine the direction. As far as we know birds contain no ferromagnetic material. So, electromagnetic induction seems to be the only reasonable mechanism to determine, direction. Consider the optimal case where the magnetic field B, the velocity of the bird v,, and two relevant points of its anatomy separated by a distance l, all three are mutually, perpendicular. From the formula for motional emf, Eq. (6.5),, , ε = Blv, Taking B = 4 × 10–5 T, l = 2 cm wide, and v = 10 m/s, we obtain, , ε = 4 × 10–5 × 2 × 10–2 × 10 V = 8 × 10–6 V, = 8 µV, This extremely small potential difference suggests that our hypothesis is of doubtful, validity. Certain kinds of fish are able to detect small potential differences. However, in, these fish, special cells have been identified which detect small voltage differences. In birds, no such cells have been identified. Thus, the migration patterns of birds continues to remain, a mystery., , SUMMARY, 1., , The magnetic flux through a surface of area A placed in a uniform magnetic, field B is defined as,, , ΦB = B.A = BA cos θ, 2., , where θ is the angle between B and A., Faraday’s laws of induction imply that the emf induced in a coil of N, turns is directly related to the rate of change of flux through it,, , dΦB, dt, Here Φ Β is the flux linked with one turn of the coil. If the circuit is, closed, a current I = ε/R is set up in it, where R is the resistance of the, circuit., Lenz’s law states that the polarity of the induced emf is such that it, tends to produce a current which opposes the change in magnetic flux, that produces it. The negative sign in the expression for Faraday’s law, indicates this fact., When a metal rod of length l is placed normal to a uniform magnetic, field B and moved with a velocity v perpendicular to the field, the, induced emf (called motional emf ) across its ends is, ε = Bl v, Changing magnetic fields can set up current loops in nearby metal, (any conductor) bodies. They dissipate electrical energy as heat. Such, currents are eddy currents., Inductance is the ratio of the flux-linkage to current. It is equal to NΦ/I., , ε = −N, , 3., , 4., , 5., , 6., , 2021–22, , 227

Page 25 :
Physics, 7., , A changing current in a coil (coil 2) can induce an emf in a nearby coil, (coil 1). This relation is given by,, , dI 2, dt, The quantity M 12 is called mutual inductance of coil 1 with respect to, coil 2. One can similarly define M 21. There exists a general equality,, M 12 = M 21, , ε1 = − M 12, , 8., , When a current in a coil changes, it induces a back emf in the same, coil. The self-induced emf is given by,, , dI, dt, L is the self-inductance of the coil. It is a measure of the inertia of the, coil against the change of current through it., 9. The self-inductance of a long solenoid, the core of which consists of a, magnetic material of relative permeability µr, is given by, L = µr µ0 n 2 Al, where A is the area of cross-section of the solenoid, l its length and n, the number of turns per unit length., 10. In an ac generator, mechanical energy is converted to electrical energy, by virtue of electromagnetic induction. If coil of N turn and area A is, rotated at ν revolutions per second in a uniform magnetic field B, then, the motional emf produced is, ε = NBA ( 2πν) sin (2π νt), where we have assumed that at time t = 0 s, the coil is perpendicular to, the field., , ε = −L, , Quantity, , Symbol, , Units, , Dimensions, , Equations, , ΦB, , Wb (weber), , [M L2 T –2 A–1], , ΦB = B A, , Magnetic Flux, EMF, , ε, , V (volt), , [M L T A ], , ε = − d( N ΦB )/ dt, , Mutual Inductance, , M, , H (henry), , [M L2 T –2 A–2], , ε1 = −M12 (dI 2 / dt ), , Self Inductance, , L, , H (henry), , [M L2 T –2 A–2], , ε = − L ( dI / d t ), , 2, , –3, , –1, , POINTS TO PONDER, 1., , 2., , 3., , 228, , Electricity and magnetism are intimately related. In the early part of the, nineteenth century, the experiments of Oersted, Ampere and others, established that moving charges (currents) produce a magnetic field., Somewhat later, around 1830, the experiments of Faraday and Henry, demonstrated that a moving magnet can induce electric current., In a closed circuit, electric currents are induced so as to oppose the, changing magnetic flux. It is as per the law of conservation of energy., However, in case of an open circuit, an emf is induced across its ends., How is it related to the flux change?, The motional emf discussed in Section 6.5 can be argued independently, from Faraday’s law using the Lorentz force on moving charges. However,, , 2021–22

Page 26 :
Electromagnetic, Induction, , 4., , even if the charges are stationary [and the q (v × B) term of the Lorentz, force is not operative], an emf is nevertheless induced in the presence of a, time-varying magnetic field. Thus, moving charges in static field and static, charges in a time-varying field seem to be symmetric situation for, Faraday’s law. This gives a tantalising hint on the relevance of the principle, of relativity for Faraday’s law., The motion of a copper plate is damped when it is allowed to oscillate, between the magnetic pole-pieces. How is the damping force, produced by, the eddy currents?, , EXERCISES, 6.1, , Predict the direction of induced current in the situations described, by the following Figs. 6.18(a) to (f )., , 229, , FIGURE 6.18, 2021–22

Page 27 :
Physics, 6.2, , Use Lenz’s law to determine the direction of induced current in the, situations described by Fig. 6.19:, (a) A wire of irregular shape turning into a circular shape;, (b) A circular loop being deformed into a narrow straight wire., , FIGURE 6.19, , 6.3, , A long solenoid with 15 turns per cm has a small loop of area 2.0 cm2, placed inside the solenoid normal to its axis. If the current carried, by the solenoid changes steadily from 2.0 A to 4.0 A in 0.1 s, what is, the induced emf in the loop while the current is changing?, , 6.4, , A rectangular wire loop of sides 8 cm and 2 cm with a small cut is, moving out of a region of uniform magnetic field of magnitude 0.3 T, directed normal to the loop. What is the emf developed across the, cut if the velocity of the loop is 1 cm s–1 in a direction normal to the, (a) longer side, (b) shorter side of the loop? For how long does the, induced voltage last in each case?, , 6.5, , A 1.0 m long metallic rod is rotated with an angular frequency of, 400 rad s–1 about an axis normal to the rod passing through its one, end. The other end of the rod is in contact with a circular metallic, ring. A constant and uniform magnetic field of 0.5 T parallel to the, axis exists everywhere. Calculate the emf developed between the, centre and the ring., A circular coil of radius 8.0 cm and 20 turns is rotated about its, vertical diameter with an angular speed of 50 rad s–1 in a uniform, horizontal magnetic field of magnitude 3.0 × 10 –2 T. Obtain the, maximum and average emf induced in the coil. If the coil forms a, closed loop of resistance 10 Ω, calculate the maximum value of current, in the coil. Calculate the average power loss due to Joule heating., Where does this power come from?, A horizontal straight wire 10 m long extending from east to west is, falling with a speed of 5.0 m s–1, at right angles to the horizontal, component of the earth’s magnetic field, 0.30 × 10–4 Wb m–2., (a) What is the instantaneous value of the emf induced in the wire?, (b) What is the direction of the emf?, (c) Which end of the wire is at the higher electrical potential?, Current in a circuit falls from 5.0 A to 0.0 A in 0.1 s. If an average emf, of 200 V induced, give an estimate of the self-inductance of the circuit., A pair of adjacent coils has a mutual inductance of 1.5 H. If the, current in one coil changes from 0 to 20 A in 0.5 s, what is the, change of flux linkage with the other coil?, A jet plane is travelling towards west at a speed of 1800 km/h. What, is the voltage difference developed between the ends of the wing, , 6.6, , 6.7, , 6.8, 6.9, , 6.10, , 230, , 2021–22

Page 28 :
Electromagnetic, Induction, having a span of 25 m, if the Earth’s magnetic field at the location, has a magnitude of 5 × 10–4 T and the dip angle is 30°., , ADDITIONAL EXERCISES, 6.11, , Suppose the loop in Exercise 6.4 is stationary but the current, feeding the electromagnet that produces the magnetic field is, gradually reduced so that the field decreases from its initial value, of 0.3 T at the rate of 0.02 T s –1. If the cut is joined and the loop, has a resistance of 1.6 Ω, how much power is dissipated by the, loop as heat? What is the source of this power?, , 6.12, , A square loop of side 12 cm with its sides parallel to X and Y axes is, moved with a velocity of 8 cm s –1 in the positive x-direction in an, environment containing a magnetic field in the positive z-direction., The field is neither uniform in space nor constant in time. It has a, gradient of 10 – 3 T cm–1 along the negative x-direction (that is it increases, by 10 – 3 T cm – 1 as one moves in the negative x-direction), and it is, decreasing in time at the rate of 10 – 3 T s–1. Determine the direction and, magnitude of the induced current in the loop if its resistance is 4.50 mΩ., , 6.13, , It is desired to measure the magnitude of field between the poles of a, powerful loud speaker magnet. A small flat search coil of area 2 cm2, with 25 closely wound turns, is positioned normal to the field, direction, and then quickly snatched out of the field region., Equivalently, one can give it a quick 90° turn to bring its plane, parallel to the field direction). The total charge flown in the coil, (measured by a ballistic galvanometer connected to coil) is, 7.5 mC. The combined resistance of the coil and the galvanometer is, 0.50 Ω. Estimate the field strength of magnet., , 6.14, , Figure 6.20 shows a metal rod PQ resting on the smooth rails AB, and positioned between the poles of a permanent magnet. The rails,, the rod, and the magnetic field are in three mutual perpendicular, directions. A galvanometer G connects the rails through a switch K., Length of the rod = 15 cm, B = 0.50 T, resistance of the closed loop, containing the rod = 9.0 mΩ. Assume the field to be uniform., (a) Suppose K is open and the rod is moved with a speed of 12 cm s–1, in the direction shown. Give the polarity and magnitude of the, induced emf., , FIGURE 6.20, , (b) Is there an excess charge built up at the ends of the rods when, K is open? What if K is closed?, (c) With K open and the rod moving uniformly, there is no net, force on the electrons in the rod PQ even though they do, 2021–22, , 231

Page 29 :
Physics, , 6.15, , 6.16, , experience magnetic force due to the motion of the rod. Explain., (d) What is the retarding force on the rod when K is closed?, (e) How much power is required (by an external agent) to keep, the rod moving at the same speed (=12 cm s–1) when K is closed?, How much power is required when K is open?, (f ) How much power is dissipated as heat in the closed circuit?, What is the source of this power?, (g) What is the induced emf in the moving rod if the magnetic field, is parallel to the rails instead of being perpendicular?, An air-cored solenoid with length 30 cm, area of cross-section 25 cm2, and number of turns 500, carries a current of 2.5 A. The current is, suddenly switched off in a brief time of 10–3 s. How much is the average, back emf induced across the ends of the open switch in the circuit?, Ignore the variation in magnetic field near the ends of the solenoid., (a) Obtain an expression for the mutual inductance between a long, straight wire and a square loop of side a as shown in Fig. 6.21., (b) Now assume that the straight wire carries a current of 50 A and, the loop is moved to the right with a constant velocity, v = 10 m/s., Calculate the induced emf in the loop at the instant when x = 0.2 m., Take a = 0.1 m and assume that the loop has a large resistance., , FIGURE 6.21, , 6.17, , A line charge λ per unit length is lodged uniformly onto the rim of a, wheel of mass M and radius R. The wheel has light non-conducting, spokes and is free to rotate without friction about its axis (Fig. 6.22)., A uniform magnetic field extends over a circular region within the, rim. It is given by,, B = – B0 k, (r ≤ a; a < R), =0, (otherwise), What is the angular velocity of the wheel after the field is suddenly, switched off ?, , 232, , FIGURE 6.22, 2021–22