Page 1 :
Unit, , 10, Objectives, After studying this Unit, you will be, able to, • name haloalkanes and haloarenes, according to the IUPAC system of, nomenclature from their given, structures;, • describe the reactions involved in, the preparation of haloalkanes and, haloarenes and understand, various reactions that they, undergo;, • correlate the structures of, haloalkanes and haloarenes with, various types of reactions;, • use stereochemistry as a tool for, understanding the reaction, mechanism;, • appreciate the applications of, organo-metallic compounds;, • highlight the environmental effects, of polyhalogen compounds., , Haloalkanes and, Haloar, enes, Haloarenes, Halogenated compounds persist in the environment due to their, resistance to breakdown by soil bacteria., , The replacement of hydrogen atom(s) in an aliphatic, or aromatic hydrocarbon by halogen atom(s) results, in the formation of alkyl halide (haloalkane) and aryl, halide (haloarene), respectively. Haloalkanes contain, halogen atom(s) attached to the sp3 hybridised carbon, atom of an alkyl group whereas haloarenes contain, halogen atom(s) attached to sp2 hybridised carbon, atom(s) of an aryl group. Many halogen containing, organic compounds occur in nature and some of, these are clinically useful. These classes of compounds, find wide applications in industry as well as in dayto-day life. They are used as solvents for relatively, non-polar compounds and as starting materials for, the synthesis of wide range of organic compounds., Chlorine containing antibiotic, chloramphenicol,, produced by microorganisms is very effective for the, treatment of typhoid fever. Our body produces iodine, containing hormone, thyroxine, the deficiency of which, causes a disease called goiter. Synthetic halogen, compounds, viz. chloroquine is used for the treatment, of malaria; halothane is used as an anaesthetic, during surgery. Certain fully fluorinated compounds, are being considered as potential blood substitutes, in surgery., In this Unit, you will study the important methods, of preparation, physical and chemical properties and, uses of organohalogen compounds., , 2020-21

Page 2 :
10.1 Classification, , Haloalkanes and haloarenes may be classified as follows:, , 10.1.1 On the, Basis of, Number of, Halogen, Atoms, , These may be classified as mono, di, or polyhalogen (tri-,tetra-, etc.), compounds depending on whether they contain one, two or more halogen, atoms in their structures. For example,, , Monohalocompounds may further be classified according to the, hybridisation of the carbon atom to which the halogen is bonded, as, discussed below., 10.1.2 Compounds, Containing, sp3 C—X, Bond (X= F,, Cl, Br, I), , This class includes, (a) Alkyl halides or haloalkanes (R—X), In alkyl halides, the halogen atom is bonded to an alkyl group (R)., They form a homologous series represented by CnH2n+1X. They are, further classified as primary, secondary or tertiary according to the, nature of carbon to which halogen is attached. If halogen is attached to, a primary carbon atom in an alkyl halide, the alkyl halide is called, primary alkyl halide or 1° alkyl halide. Similarly, if halogen is attached, to secondary or tertiary carbon atom, the alkyl halide is called, secondary alkyl halide (2°) and tertiary (3°) alkyl halide, respectively., , (b) Allylic halides, These are the compounds in which the halogen atom is bonded to an, sp3-hybridised carbon atom adjacent to carbon-carbon double bond, (C=C) i.e. to an allylic carbon., Allylic carbon, Allylic carbon, (c) Benzylic halides, These are the compounds in which the halogen atom is bonded to an, sp3-hybridised carbon atom attached to an aromatic ring., Chemistry 290, , 2020-21

Page 3 :
10.1.3 Compounds, Containing, sp2 C—X, Bond, , This class includes:, (a) Vinylic halides, These are the compounds in which the halogen atom is bonded to, a sp2-hybridised carbon atom of a carbon-carbon double bond, (C = C)., (b) Aryl halides, These are the compounds in which the halogen atom is directly, bonded to the sp2-hybridised carbon atom of an aromatic ring., , 10.2 Nomenclature, , Having learnt the classification of halogenated compounds, let us now learn, how these are named. The common names of alkyl halides are derived by, naming the alkyl group followed by the name of halide. In the IUPAC system, of nomenclature, alkyl halides are named as halosubstituted hydrocarbons., For mono halogen substituted derivatives of benzene, common and IUPAC, names are the same. For dihalogen derivatives, the prefixes o-, m-, p- are, used in common system but in IUPAC system, as you have learnt in Class, XI, Unit 12, the numerals 1,2; 1,3 and 1,4 are used., , The dihaloalkanes having the same type of halogen atoms are named, as alkylidene or alkylene dihalides. The dihalo-compounds having both, the halogen atoms are further classified as geminal halides or gem-dihalides, when both the halogen atoms are present on the same carbon atom of the, 291 Haloalkanes and Haloarenes, , 2020-21

Page 6 :
Table 10.2: Carbon-Halogen (C—X) Bond Lengths, Bond, Enthalpies and Dipole Moments, Bond, , Bond length/pm, , C-X Bond enthalpies/ kJmol-1, , Dipole moment/Debye, , CH3–F, , 139, , 452, , 1.847, , CH3– Cl, , 178, , 351, , 1.860, , CH 3–Br, , 193, , 293, , 1.830, , CH3–I, , 214, , 234, , 1.636, , 10.4 Methods of, Preparation, of Haloalkanes, 10.4.1 From Alcohols, , The hydroxyl group of an alcohol is replaced by halogen on reaction with, concentrated halogen acids, phosphorus halides or thionyl chloride., Thionyl chloride is preferred because in this reaction alkyl halide is formed, along with gases SO2 and HCl. The two gaseous products are escapable,, hence, the reaction gives pure alkyl halides. The reactions of primary and, secondary alcohols with HCl require the presence of a catalyst, ZnCl2., With tertiary alcohols, the reaction is conducted by simply shaking the, alcohol with concentrated HCl at room temperature. Constant boiling, with HBr (48%) is used for preparing alkyl bromide. Good yields of, R—I may be obtained by heating alcohols with sodium or potassium, iodide in 95% orthophosphoric acid. The order of reactivity of alcohols, with a given haloacid is 3°>2°>1°. Phosphorus tribromide and triiodide, are usually generated in situ (produced in the reaction mixture) by the, reaction of red phosphorus with bromine and iodine respectively., , The preparation of alkyl chloride is carried out either by passing, dry hydrogen chloride gas through a solution of alcohol or by heating, a mixture of alcohol and concentrated aqueous halogen acid., The above methods are not applicable for the preparation of aryl, halides because the carbon-oxygen bond in phenols has a partial double, bond character and is difficult to break being stronger than a single, bond (Unit 11, Class XI)., 10.4.2 From, Hydrocarbons, , (I) From alkanes by free radical halogenation, Free radical chlorination or bromination of alkanes gives a complex, mixture of isomeric mono- and polyhaloalkanes, which is difficult to, , Chemistry 294, , 2020-21

Page 7 :
separate as pure compounds. Consequently, the yield of any single, compound is low (Unit 13, Class XI)., , (II) From alkenes, (i) Addition of hydrogen halides: An alkene is converted to, corresponding alkyl halide by reaction with hydrogen chloride,, hydrogen bromide or hydrogen iodide., , Propene yields two products, however only one predominates as, per Markovnikov’s rule. (Unit 13, Class XI), , (ii) Addition of halogens: In the laboratory, addition of bromine in, CCl4 to an alkene resulting in discharge of reddish brown colour, of bromine constitutes an important method for the detection of, double bond in a molecule. The addition results in the synthesis, of vic-dibromides, which are colourless (Unit 13, Class XI)., , Identify all the possible monochloro structural isomers expected to be, formed on free radical monochlorination of (CH3)2CHCH2CH3., , Example 10.3, , In the given molecule, there are four different types of hydrogen atoms., Replacement of these hydrogen atoms will give the following, , Solution, , (CH3)2CHCH2CH2Cl, , (CH3)2CHCH(Cl)CH3, , (CH3)2C(Cl)CH2CH3, , CH3CH(CH2Cl)CH2CH3, , 10.4.3 Halogen, Exchange, , Alkyl iodides are often prepared by the reaction of alkyl chlorides/, bromides with NaI in dry acetone. This reaction is known as Finkelstein, reaction., , NaCl or NaBr thus formed is precipitated in dry acetone. It facilitates, the forward reaction according to Le Chatelier’s Principle., The synthesis of alkyl fluorides is best accomplished by heating an, alkyl chloride/bromide in the presence of a metallic fluoride such as, 295 Haloalkanes and Haloarenes, , 2020-21

Page 8 :
AgF, Hg2F2, CoF2 or SbF3. The reaction is termed as Swarts reaction., , 10.5 Preparation of, Haloarenes, , (i) From hydrocarbons by electrophilic substitution, Aryl chlorides and bromides can be easily prepared by electrophilic, substitution of arenes with chlorine and bromine respectively in the, presence of Lewis acid catalysts like iron or iron(III) chloride., , The ortho and para isomers can be easily separated due to large, difference in their melting points. Reactions with iodine are reversible, in nature and require the presence of an oxidising agent (HNO3,, HIO4) to oxidise the HI formed during iodination. Fluoro compounds, are not prepared by this method due to high reactivity of fluorine., (ii) From amines by Sandmeyer’s reaction, When a primary aromatic amine, dissolved or suspended in cold, aqueous mineral acid, is treated with sodium nitrite, a diazonium, salt is formed (Unit 13, Class XII). Mixing the solution of freshly, prepared diazonium salt with cuprous chloride or cuprous, bromide results in the replacement of the diazonium group, by –Cl or –Br., , Replacement of the diazonium group by iodine does not require the, presence of cuprous halide and is done simply by shaking the diazonium, salt with potassium iodide., , Chemistry 296, , 2020-21

Page 9 :
Example 10.4, , Write the products of the following reactions:, , Solution, , Intext Questions, 10.2 Why is sulphuric acid not used during the reaction of alcohols with KI?, 10.3 Write structures of different dihalogen derivatives of propane., 10.4 Among the isomeric alkanes of molecular formula C5H12, identify the one that, on photochemical chlorination yields, (i) A single monochloride., (ii) Three isomeric monochlorides., (iii) Four isomeric monochlorides., 10.5 Draw the structures of major monohalo products in each of the following, reactions:, , 10.6 Physical, Properties, , Alkyl halides are colourless when pure. However, bromides and iodides, develop colour when exposed to light. Many volatile halogen compounds, have sweet smell., 297 Haloalkanes and Haloarenes, , 2020-21

Page 10 :
Melting and boiling points, Methyl chloride, methyl bromide, ethyl chloride and some, chlorofluoromethanes are gases at room temperature. Higher members, are liquids or solids. As we have already learnt, molecules of organic, halogen compounds are generally polar. Due to greater polarity as well, as higher molecular mass as compared to the parent hydrocarbon, the, intermolecular forces of attraction (dipole-dipole and van der Waals), are stronger in the halogen derivatives. That is why the boiling points, of chlorides, bromides and iodides are considerably higher than those, of the hydrocarbons of comparable molecular mass., The attractions get stronger as the molecules get bigger in size and, have more electrons. The pattern of variation of boiling points of different, halides is depicted in Fig. 10.1. For the same alkyl group, the boiling, points of alkyl halides decrease in the order: RI> RBr> RCl> RF. This, is because with the increase in size and mass of halogen atom, the, magnitude of van der Waal forces increases., , Fig. 10.1: Comparison of boiling points of some alkyl halides, , The boiling points of isomeric haloalkanes decrease with increase, in branching (Unit 12, Class XI). For example, 2-bromo-2methylpropane has the lowest boiling point among the three isomers., , Boiling points of isomeric dihalobenzenes are very nearly the same., However, the para-isomers are high melting as compared to their orthoand meta-isomers. It is due to symmetry of para-isomers that fits in, crystal lattice better as compared to ortho- and meta-isomers., Chemistry 298, , 2020-21

Page 11 :
Density, Bromo, iodo and polychloro derivatives of hydrocarbons are heavier than, water. The density increases with increase in number of carbon atoms,, halogen atoms and atomic mass of the halogen atoms (Table 10.3)., Table 10.3: Density of Some Haloalkanes, Compound, , Density (g/mL), , Compound, , Density (g/mL), , n–C3H7Cl, , 0.89, , CH2Cl2, , 1.336, , n–C3H7Br, , 1.335, , CHCl3, , 1.489, , n-C3H7I, , 1.747, , CCl4, , 1.595, , Solubility, The haloalkanes are very slightly soluble in water. In order to dissolve, haloalkane in water, energy is required to overcome the attractions between, the haloalkane molecules and break the hydrogen bonds between water, molecules. Less energy is released when new attractions are set up between, the haloalkane and the water molecules as these are not as strong as the, original hydrogen bonds in water. As a result, the solubility of haloalkanes, in water is low. However, haloalkanes tend to dissolve in organic solvents, because the new intermolecular attractions between haloalkanes and, solvent molecules have much the same strength as the ones being broken, in the separate haloalkane and solvent molecules., , Intext Question, 10.6 Arrange each set of compounds in order of increasing boiling points., (i) Bromomethane, Bromoform, Chloromethane, Dibromomethane., (ii) 1-Chloropropane, Isopropyl chloride, 1-Chlorobutane., , 10.7 Chemical, Reactions, 10.7.1 Reactions of, Haloalkanes, , The reactions of haloalkanes may be divided into the following categories:, 1. Nucleophilic substitution, 2. Elimination reactions, 3. Reaction with metals., (1) Nucleophilic substitution reactions, You have learnt in Class XI that nucleophiles are electron rich species., Therefore, they attack at that part of the substrate molecule which, is electron deficient. The reaction in which a nucleophile replaces, 299 Haloalkanes and Haloarenes, , 2020-21

Page 13 :
Haloalkanes react with KCN to form alkyl cyanides as main product, while AgCN forms isocyanides as the chief product. Explain., , Example 10.5, , KCN is predominantly ionic and provides cyanide ions in solution., Although both carbon and nitrogen atoms are in a position to donate, electron pairs, the attack takes place mainly through carbon atom and, not through nitrogen atom since C—C bond is more stable than C—N, bond. However, AgCN is mainly covalent in nature and nitrogen is free, to donate electron pair forming isocyanide as the main product., , Solution, , carbon atom resulting in alkyl cyanides and through nitrogen atom, leading to isocyanides. Similarly nitrite ion also represents, an ambident, ii, nucleophile with two different points of linkage [–O— N =O]. The linkage, through oxygen results in alkyl nitrites while through nitrogen atom, it, leads to nitroalkanes., Mechanism: This reaction has been found to proceed by two different, mechanims which are described below:, (a) Substitution nucleophilic bimolecular (SN2), The reaction between CH3Cl and hydroxide ion to yield methanol and, chloride ion follows a second order kinetics, i.e., the rate depends, upon the concentration of both the reactants., , You have already learnt in Section 12.3.2 of Class XI, the solid wedge represents the bond, coming out of the paper, dashed line going down the paper and a straight line representing, bond in the plane of the paper., , The above reaction can be represented diagrammatically as shown in, Fig. 10.2., , Fig. 10.2: Red ball represents the incoming hydroxide ion and green ball represents, the outgoing halide ion, In the year 1937,, Edward Davies Hughes, and Sir Christopher, Ingold proposed a, mechanism for an SN2, reaction., , It depicts a bimolecular nucleophilic substitution (SN2) reaction;, the incoming nucleophile interacts with alkyl halide causing the, carbon-halide bond to break and a new bond is formed between, carbon and attacking nucleophile. Here it is C-O bond formed between, C and -OH. These two processes take place simultaneously in a, 301 Haloalkanes and Haloarenes, , 2020-21

Page 14 :
single step and no intermediate is formed. As the reaction progresses, and the bond between the incoming nucleophile and the carbon, atom starts forming, the bond between carbon atom and leaving, group weakens. As this happens, the three carbon-hydrogen bonds, of the substrate start moving away from the attacking nucleophile. In, transition state all the three C-H bonds are in the same plane and the, attacking and leaving nucleophiles are partially attached to the, carbon. As the attacking nucleophile approaches closer to the carbon,, C-H bonds still keep on moving in the same direction till the attacking, nucleophile attaches to carbon and leaving group leaves the carbon., As a result configuration is inverted, the configuration (See box) of, carbon atom under attack inverts in much the same way as an, umbrella is turned inside out when caught in a strong wind. This, process is called as inversion of configuration. In the transition, state, the carbon atom is simultaneously bonded to incoming, nucleophile and the outgoing leaving group. Such structures are, unstable and cannot be isolated. Thus, in the transition state, carbon, is simultaneously bonded to five atoms., , Configuration, Spacial arrangement of functional groups around carbon is called its configuration., See the structures (A) and (B) given below carefully., , These are the two structures of the same compound. They differ in spacial arrangement, of functional groups attached to carbon. Structure (A) is mirror image of Structure (B)., We say configuration of carbon in structure (A) is mirror image of the configuration of, carbon in structure (B)., , Hughes worked under, Ingold and earned a, D.Sc. degree from the, University of London., , Since this reaction requires the approach of the nucleophile to the, carbon bearing the leaving group, the presence of bulky substituents, on or near the carbon atom have a dramatic inhibiting effect. Of the, simple alkyl halides, methyl halides react most rapidly in SN2 reactions, because there are only three small hydrogen atoms. Tertiary halides, are the least reactive because bulky groups hinder the approaching, , Chemistry 302, , 2020-21

Page 15 :
nucleophiles. Thus the order of reactivity followed is:, Primary halide > Secondary halide > Tertiary halide., , Fig.10.3: Steric effects in SN2 reaction. The relative rate of SN2 reaction is given in parenthesis, , (b) Substitution nucleophilic unimolecular (SN1), SN1 reactions are generally carried out in polar protic solvents, (like water, alcohol, acetic acid, etc.). The reaction between tertbutyl bromide and hydroxide ion yields tert-butyl alcohol and, follows the first order kinetics, i.e., the rate of reaction depends, upon the concentration of only one reactant, which is tert- butyl, bromide., , It occurs in two steps. In step I, the polarised C—Br bond undergoes, slow cleavage to produce a carbocation and a bromide ion. The, carbocation thus formed is then attacked by nucleophile in step II, to complete the substitution reaction., , 303 Haloalkanes and Haloarenes, , 2020-21

Page 16 :
Step I is the slowest and reversible. It involves the C–Br bond breaking for which the, energy is obtained through solvation of halide ion with the proton of protic solvent. Since, the rate of reaction depends upon the slowest step, the rate of reaction depends only on the, concentration of alkyl halide and not on the concentration of hydroxide ion. Further, greater, the stability of carbocation, greater will be its ease of formation from alkyl halide and faster, 0, will be the rate of reaction. In case of alkyl halides, 3 alkyl halides undergo SN1 reaction, 0, very fast because of the high stability of 3 carbocations. We can sum up the order of reactivity, of alkyl halides towards SN1 and SN2 reactions as follows:, , For the same reasons, allylic and benzylic halides show high reactivity towards the SN1, reaction. The carbocation thus formed gets stabilised through resonance (Unit 12, Class XI) as, shown below:, +, , +, , H2C C CH2, H, , H2C, , C, H, , CH2, , For a given alkyl group, the reactivity of the halide, R-X, follows the same order in both the, mechanisms R–I> R–Br>R–Cl>>R–F., , In the following pairs of halogen compounds, which would undergo, SN2 reaction faster?, , It is primary halide and therefore undergoes SN2, reaction faster., , Example 10.6, , Solution, , As iodine is a better leaving group because of its, large size, it will be released at a faster rate in the, presence of incoming nucleophile., Predict the order of reactivity of the following compounds in SN1 and, SN2 reactions:, (i) The four isomeric bromobutanes, (ii) C6H5CH2Br, C6H5CH(C6H5)Br, C6H5CH(CH3)Br, C6H5C(CH3)(C6H5)Br, Chemistry 304, , 2020-21, , Example 10.7

Page 17 :
Solution (i) CH3CH2CH2CH2Br < (CH3)2CHCH2Br < CH3CH2CH(Br)CH3 < (CH3)3CBr (SN1), CH3CH2CH2CH2Br > (CH3)2CHCH2Br > CH3CH2CH(Br)CH3 > (CH3)3CBr (SN2), Of the two primary bromides, the carbocation intermediate derived from, (CH3)2CHCH2Br is more stable than derived from CH3CH2CH2CH2Br because, of greater electron donating inductive effect of (CH3)2CH- group. Therefore,, (CH3)2CHCH2Br is more reactive than CH3CH2CH2CH2Br in SN1 reactions., CH3CH2CH(Br)CH3 is a secondary bromide and (CH3)3CBr is a tertiary, bromide. Hence the above order is followed in SN1. The reactivity in SN2, reactions follows the reverse order as the steric hinderance around the, electrophilic carbon increases in that order., (ii) C6H5C(CH3)(C6H5)Br > C6H5CH(C6H5)Br > C6H5CH(CH3)Br > C6H5CH2Br (SN1), C6H5C(CH3)(C6H5)Br < C6H5CH(C6H5)Br < C6H5CH(CH3)Br < C6H5CH2Br (SN2), Of the two secondary bromides, the carbocation intermediate obtained, from C6H5CH(C6H5)Br is more stable than obtained from C6H5CH(CH3)Br, because it is stabilised by two phenyl groups due to resonance. Therefore,, the former bromide is more reactive than the latter in SN1 reactions. A, phenyl group is bulkier than a methyl group. Therefore, C6H5CH(C6H5)Br, is less reactive than C6H5CH(CH3)Br in SN2 reactions., , William Nicol (17681851) developed the first, prism that produced, plane polarised light., , (c) Stereochemical aspects of nucleophilic substitution reactions, In order to understand the stereochemical aspects of substitution, reactions, we need to learn some basic stereochemical principles, and notations (optical activity, chirality, retention, inversion,, racemisation, etc.)., (i) Optical activity: Plane of plane polarised light produced by, passing ordinary light through Nicol prism is rotated when it, is passed through the solutions of certain compounds. Such, compounds are called optically active compounds. The angle, by which the plane polarised light is rotated is measured by an, instrument called polarimeter. If the compound rotates the plane, of plane polarised light to the right, i.e., clockwise direction, it, is called dextrorotatory (Greek for right rotating) or the d-form, and is indicated by placing a positive (+) sign before the degree, of rotation. If the light is rotated towards left (anticlockwise, direction), the compound is said to be laevo-rotatory or the, l-form and a negative (–) sign is placed before the degree of, rotation. Such (+) and (–) isomers of a compound are called, optical isomers and the phenomenon is termed as optical, isomerism., (ii) Molecular asymmetry, chirality and enantiomers: The, observation of Louis Pasteur (1848) that crystals of certain, compounds exist in the form of mirror images laid the, foundation of modern stereochemistry. He demonstrated that, aqueous solutions of both types of crystals showed optical, rotation, equal in magnitude (for solution of equal concentration), but opposite in direction. He believed that this difference in, optical activity was associated with the three dimensional, arrangements of atoms in the molecules (configurations) of, 305 Haloalkanes and Haloarenes, , 2020-21

Page 18 :
two types of crystals. Dutch scientist, J. Van’t Hoff and French, scientist, C. Le Bel in the same year (1874), independently, argued that the spatial arrangement of four groups (valencies), Jacobus Hendricus, around a central carbon is tetrahedral and if all the substituents, Van’t Hoff (1852-1911), attached to that carbon are different, the mirror image of the, received the first Nobel, molecule, is not superimposed (overlapped) on the molecule;, Prize in Chemistry in, such, a, carbon, is called asymmetric carbon or stereocentre., 1901 for his work on, The resulting molecule would lack symmetry and is referred to, solutions., as asymmetric molecule. The asymmetry of the molecule along, with non superimposability of mirror images is responsible for, the optical activity in such organic compounds., The symmetry and asymmetry are also observed in many day to day, objects: a sphere, a cube, a cone, are all identical to, their mirror images and can be superimposed., However, many objects are non superimposable on, their mirror images. For example, your left and right, hand look similar but if you put your left hand on, your right hand by moving them in the same plane,, they do not coincide. The objects which are nonsuperimposable on their mirror image (like a pair, of hands) are said to be chiral and this property is, known as chirality. Chiral molecules are optically, active, while the objects, which are, superimposable, on their mirror images are called achiral. These, molecules are optically inactive., The above test of molecular chirality can be, applied to organic molecules by constructing, models and its mirror images or by drawing three, dimensional structures and attempting to, superimpose them in our minds. There are other, aids, however, that can assist us in recognising, Fig 10.4: Some common examples of chiral and chiral molecules. One such aid is the presence of, a single asymmetric carbon atom. Let us consider, achiral objects, two simple molecules propan-2-ol (Fig.10.5) and butan-2-ol, (Fig.10.6) and their mirror images., , Fig 10.5: B is mirror image of A; B is rotated by 180o and C is, obtained; C is superimposable on A., , As you can see very clearly, propan-2-ol (A) does not contain an asymmetric, carbon, as all the four groups attached to the tetrahedral carbon are not, different. We rotate the mirror image (B) of the molecule by 180° (structure, C) and try to overlap the structure (C) with the structure (A), these structures, completely overlap. Thus propan-2-ol is an achiral molecule., Chemistry 306, , 2020-21

Page 19 :
Fig 10.6: E is mirror image of D; E is rotated by 180o to get F and F is, non superimposable on its mirror image D., , Butan-2-ol has four different groups attached to, the tetrahedral carbon and as expected is chiral. Some common, examples, of, chiral, molecules, such, as, 2-chlorobutane, 2, 3-dihyroxypropanal, (OHC–CHOH–CH2OH),, bromochloro-iodomethane (BrClCHI), 2-bromopropanoic acid, (H3C–CHBr–COOH), etc., Fig. 10.7: A chiral molecule, and its mirror image, , The stereoisomers related to each other as nonsuperimposable mirror images are called enantiomers, (Fig. 10.7). A and B in Fig. 10.5 and D and E in Fig. 10.6 are, enantiomers., Enantiomers possess identical physical properties namely,, melting point, boiling point, refractive index, etc. They only differ, with respect to the rotation of plane polarised light. If one of the, enantiomer is dextro rotatory, the other will be laevo rotatory., However, the sign of optical rotation is not necessarily related to, the absolute (actual) configuration of the molecule., , A mixture containing two enantiomers in equal proportions, will have zero optical rotation, as the rotation due to one isomer, will be cancelled by the rotation due to the other isomer. Such, a mixture is known as racemic mixture or racemic, modification. A racemic mixture is represented by prefixing dl, or (±) before the name, for example (±) butan-2-ol. The process, of conversion of enantiomer into a racemic mixture is known as, racemisation., , Example 10.8 Identify chiral and achiral molecules in each of the following pair of, compounds. (Wedge and Dash representations according to Class XI,, Fig. 12.1)., , 307 Haloalkanes and Haloarenes, , 2020-21

Page 20 :
Solution, , (iii) Retention: Retention of configuration is the preservation of the spatial, arrangement of bonds to an asymmetric centre during a chemical, reaction or transformation., In general, if during a reaction, no bond to the stereocentre is broken,, the product will have the same general configuration of groups, around the stereocentre as that of reactant. Such a reaction is said, to proceed with retention of the configuration. Consider as an, example, the reaction that takes place when (–)-2-methylbutan-1-ol, is heated with concentrated hydrochloric acid., , It is important to note that configuration at a symmetric centre in, the reactant and product is same but the sign of optical rotation, has changed in the product. This is so because two different, compounds with same configuration at asymmetric centre may have, different optical rotation. One may be dextrorotatory (plus sign of, optical rotation) while other may be laevorotatory (negative sign of, optical rotation)., (iv) Inversion, retention and racemisation: There are three outcomes, for a reaction at an asymmetric carbon atom, when a bond directly, linked to an asymmetric carbon atom is broken. Consider the, replacement of a group X by Y in the following reaction;, , If (A) is the only compound obtained, the process is called retention, of configuration. Note that configuration has been rotated in A., If (B) is the only compound obtained, the process is called inversion, of configuration. Configuration has been inverted in B., Chemistry 308, , 2020-21

Page 21 :
If a 50:50 mixture of A and B is obtained then the process is called, racemisation and the product is optically inactive, as one isomer will, rotate the plane polarised light in the direction opposite to another., Now let us have a fresh look at SN1 and SN2 mechanisms by, taking examples of optically active alkyl halides., In case of optically active alkyl halides, the product formed as a, result of SN2 mechanism has the inverted configuration as compared, to the reactant. This is because the nucleophile attaches itself on the, side opposite to the one where the halogen atom is present. When, (–)-2-bromooctane is allowed to react with sodium hydroxide,, (+)-octan-2-ol is formed with the –OH group occupying the position, opposite to what bromide had occupied., , Thus, SN2 reactions of optically active halides are accompanied by, inversion of configuration., In case of optically active alkyl halides, S N1 reactions are, accompanied by racemisation. Can you think of the reason why it, 2, happens? Actually the carbocation formed in the slow step being sp, hybridised is planar (achiral). The attack of the nucleophile may be, accomplished from either side of the plane of carbocation resulting in, a mixture of products, one having the same configuration (the –OH, , Location of α and, β carbon in a, molecule, Carbon on which, halogen atom is, directly attached is, called α-carbon and, the carbon atom, adjacent to this, carbon is called, β-carbon., , attaching on the same position as halide ion) and the other having, opposite configuration (the –OH attaching on the side opposite to halide, ion). This may be illustrated by hydrolysis of optically active, 2-bromobutane, which results in the formation of (±)-butan-2-ol., 2. Elimination reactions, When a haloalkane with β-hydrogen atom is heated with alcoholic, solution of potassium hydroxide, there is elimination of hydrogen, atom from β-carbon and a halogen atom from the α-carbon atom., , 309 Haloalkanes and Haloarenes, , 2020-21

Page 22 :
As a result, an alkene is formed as a product. Since β-hydrogen, atom is involved in elimination, it is often called β-elimination., If there is possibility of formation of more than one alkene due to, the availability of more than one β-hydrogen atoms, usually one alkene, is formed as the major product. These form part of a pattern first, observed by Russian chemist, Alexander Zaitsev (also pronounced as, Saytzeff) who in 1875 formulated a rule which can be summarised as, “in dehydrohalogenation reactions, the preferred product is that, alkene which has the greater number of alkyl groups attached to the, doubly bonded carbon atoms.” Thus, 2-bromopentane gives, pent-2-ene as the major product., , Elimination versus substitution, A chemical reaction is the result of competition; it is a race that is won by the fastest, runner. A collection of molecules tend to do, by and large, what is easiest for them. An, alkyl halide with β-hydrogen atoms when reacted with a base or a nucleophile has two, competing routes: substitution (SN1 and SN2) and elimination. Which route will be taken, up depends upon the nature of alkyl halide, strength and size of base/nucleophile and, reaction conditions. Thus, a bulkier nucleophile will prefer to act as a base and abstracts, a proton rather than approach a tetravalent carbon atom (steric reasons) and vice versa., Similarly, a primary alkyl halide will prefer a SN2 reaction, a secondary halide- SN2 or, elimination depending upon the strength of base/nucleophile and a tertiary halide- SN1 or, elimination depending upon the stability of carbocation or the more substituted alkene., , 3. Reaction with metals, Most organic chlorides, bromides and iodides react with certain, metals to give compounds containing carbon-metal bonds. Such, compounds are known as organo-metallic compounds. An, important class of organo-metallic compounds discovered by Victor, Grignard in 1900 is alkyl magnesium halide, RMgX, referred as, Grignard Reagents. These reagents are obtained by the reaction of, haloalkanes with magnesium metal in dry ether., , Chemistry 310, , 2020-21

Page 23 :
Victor Grignard had a strange start in academic life for a chemist - he, took a maths degree. When he eventually switched to chemistry, it was, not to the mathematical province of physical chemistry but to organic, chemistry. While attempting to find an efficient catalyst for the process, of methylation, he noted that Zn in diethyl ether had been used for this, purpose and wondered whether the Mg/ether combination might be, successful. Grignard reagents were first reported in 1900 and Grignard, used this work for his doctoral thesis in 1901. In 1910, Grignard obtained, a professorship at the University of Nancy and in 1912, he was awarded, the Nobel prize for Chemistry which he shared with Paul Sabatier who, had made advances in nickel catalysed hydrogenation., , In the Grignard reagent, the carbon-magnesium bond is covalent, but highly polar, with carbon pulling electrons from electropositive, magnesium; the magnesium halogen bond is essentially ionic., , Grignard reagents are highly reactive and react with any source of, proton to give hydrocarbons. Even water, alcohols, amines are sufficiently, acidic to convert them to corresponding hydrocarbons., It is therefore necessary to avoid even traces of moisture from a Grignard, reagent. That is why reaction is carried out in dry ether. On the other, hand, this could be considered as one of the methods for converting, halides to hydrocarbons., Wurtz reaction, Alkyl halides react with sodium in dry ether to give hydrocarbons, containing double the number of carbon atoms present in the halide., This reaction is known as Wurtz reaction (Unit 13, Class XI)., 10.7.2 Reactions of, Haloarenes, , 1. Nucleophilic substitution, Aryl halides are extremely less reactive towards nucleophilic, substitution reactions due to the following reasons:, (i) Resonance effect : In haloarenes, the electron pairs on halogen, atom are in conjugation with π-electrons of the ring and the, following resonating structures are possible., , C—Cl bond acquires a partial double bond character due to, resonance. As a result, the bond cleavage in haloarene is difficult, than haloalkane and therefore, they are less reactive towards, nucleophilic substitution reaction., 311 Haloalkanes and Haloarenes, , 2020-21

Page 24 :
(ii) Difference in hybridisation of carbon atom in C—X bond: In, haloalkane, the carbon atom attached to halogen is sp3, hybridised while in case of haloarene, the carbon atom attached, to halogen is sp2-hybridised., , The sp2 hybridised carbon with a greater s-character is more, electronegative and can hold the electron pair of C—X bond, more tightly than sp3-hybridised carbon in haloalkane with, less s-chararcter. Thus, C—Cl bond length in haloalkane is, 177pm while in haloarene is 169 pm. Since it is difficult to, break a shorter bond than a longer bond, therefore, haloarenes, are less reactive than haloalkanes towards nucleophilic, substitution reaction., (iii) Instability of phenyl cation: In case of haloarenes, the phenyl, cation formed as a result of self-ionisation will not be stabilised, by resonance and therefore, SN1 mechanism is ruled out., (iv) Because of the possible repulsion, it is less likely for the electron, rich nucleophile to approach electron rich arenes., Replacement by hydroxyl group, Chlorobenzene can be converted into phenol by heating in aqueous, sodium hydroxide solution at a temperature of 623K and a pressure, of 300 atmospheres., , The presence of an electron withdrawing group (-NO2) at ortho- and, para-positions increases the reactivity of haloarenes., , Chemistry 312, , 2020-21

Page 25 :
The effect is pronounced when (-NO2) group is introduced at orthoand para- positions. However, no effect on reactivity of haloarenes is, observed by the presence of electron withdrawing group at meta-position., Mechanism of the reaction is as depicted:, , Can you think why does NO2 group show its effect only at ortho- and para- positions, and not at meta- position?, As shown, the presence of nitro group at ortho- and para-positions withdraws the, electron density from the benzene ring and thus facilitates the attack of the nucleophile, on haloarene. The carbanion thus formed is stabilised through resonance. The negative, charge appeared at ortho- and para- positions with respect to the halogen substituent is, stabilised by –NO2 group while in case of meta-nitrobenzene, none of the resonating, structures bear the negative charge on carbon atom bearing the –NO2 group. Therefore,, the presence of nitro group at meta- position does not stabilise the negative charge and, no effect on reactivity is observed by the presence of –NO2 group at meta-position., 313 Haloalkanes and Haloarenes, , 2020-21

Page 26 :
2. Electrophilic substitution reactions, Haloarenes undergo the usual electrophilic reactions of the benzene, ring such as halogenation, nitration, sulphonation and Friedel-Crafts, reactions. Halogen atom besides being slightly deactivating is o, pdirecting; therefore, further substitution occurs at ortho- and parapositions with respect to the halogen atom. The o, p-directing influence, of halogen atom can be easily understood if we consider the resonating, structures of halobenzene as shown:, , Due to resonance, the electron density increases more at ortho- and, para-positions than at meta-positions. Further, the halogen atom, because of its –I effect has some tendency to withdraw electrons from, the benzene ring. As a result, the ring gets somewhat deactivated as, compared to benzene and hence the electrophilic substitution reactions, in haloarenes occur slowly and require more drastic conditions as, compared to those in benzene., (i) Halogenation, , (ii) Nitration, , (iii) Sulphonation, , Chemistry 314, , 2020-21

Page 27 :
(iv) Friedel-Crafts reaction, , Example 10.9 Although chlorine is an electron withdrawing group, yet it is ortho-,, para- directing in electrophilic aromatic substitution reactions. Why?, , Solution Chlorine withdraws electrons through inductive effect and releases, electrons through resonance. Through inductive effect, chlorine, destabilises the intermediate carbocation formed during the electrophilic, substitution., , Through resonance, halogen tends to stabilise the carbocation and, the effect is more pronounced at ortho- and para- positions. The, inductive effect is stronger than resonance and causes net electron, withdrawal and thus causes net deactivation. The resonance effect, tends to oppose the inductive effect for the attack at ortho- and parapositions and hence makes the deactivation less for ortho- and paraattack. Reactivity is thus controlled by the stronger inductive effect, and orientation is controlled by resonance effect., 315 Haloalkanes and Haloarenes, , 2020-21

Page 28 :
3. Reaction with metals, Wurtz-Fittig reaction, A mixture of an alkyl halide and aryl halide gives an alkylarene when, treated with sodium in dry ether and is called Wurtz-Fittig reaction., , Fittig reaction, Aryl halides also give analogous compounds when treated with sodium, in dry ether, in which two aryl groups are joined together. It is called, Fittig reaction., , Intext Questions, 10.7 Which alkyl halide from the following pairs would you expect to react more, rapidly by an SN2 mechanism? Explain your answer., , 10.8 In the following pairs of halogen compounds, which compound undergoes faster, SN1 reaction?, , 1, , 10.9 Identify A, B, C, D, E, R and R in the following:, , Chemistry 316, , 2020-21

Page 29 :
10.8 Polyhalogen, Compounds, , Carbon compounds containing more than one halogen atom are usually, referred to as polyhalogen compounds. Many of these compounds are, useful in industry and agriculture. Some polyhalogen compounds are, described in this section., , 10.8.1 Dichloromethane, (Methylene, chloride), , Dichloromethane is widely used as a solvent as a paint remover, as a, propellant in aerosols, and as a process solvent in the manufacture of, drugs. It is also used as a metal cleaning and finishing solvent. Methylene, chloride harms the human central nervous system. Exposure to lower, levels of methylene chloride in air can lead to slightly impaired hearing, and vision. Higher levels of methylene chloride in air cause dizziness,, nausea, tingling and numbness in the fingers and toes. In humans, direct, skin contact with methylene chloride causes intense burning and mild, redness of the skin. Direct contact with the eyes can burn the cornea., , Chemically, chloroform is employed as a solvent for fats, alkaloids,, 10.8.2 Trichloroiodine and other substances. The major use of chloroform today is in, methane, (Chloroform) the production of the freon refrigerant R-22. It was once used as a, general anaesthetic in surgery but has been replaced by less toxic,, safer anaesthetics, such as ether. As might be expected from its use as, an anaesthetic, inhaling chloroform vapours depresses the central, nervous system. Breathing about 900 parts of chloroform per million, parts of air (900 parts per million) for a short time can cause dizziness,, fatigue, and headache. Chronic chloroform exposure may cause damage, to the liver (where chloroform is metabolised to phosgene) and to the, kidneys, and some people develop sores when the skin is immersed in, chloroform. Chloroform is slowly oxidised by air in the presence of, light to an extremely poisonous gas, carbonyl chloride, also known as, phosgene. It is therefore stored in closed dark coloured bottles, completely filled so that air is kept out., , 10.8.3 Triiodomethane, (Iodoform), , It was used earlier as an antiseptic but the antiseptic properties are, due to the liberation of free iodine and not due to iodoform itself. Due, to its objectionable smell, it has been replaced by other formulations, containing iodine., , 10.8.4 Tetrachloromethane, (Carbon, tetrachloride), , It is produced in large quantities for use in the manufacture of, refrigerants and propellants for aerosol cans. It is also used as, feedstock in the synthesis of chlorofluorocarbons and other chemicals,, pharmaceutical manufacturing, and general solvent use. Until the mid, 1960s, it was also widely used as a cleaning fluid, both in industry,, as a degreasing agent, and in the home, as a spot remover and as fire, extinguisher. There is some evidence that exposure to carbon, tetrachloride causes liver cancer in humans. The most common effects, are dizziness, light headedness, nausea and vomiting, which can cause, permanent damage to nerve cells. In severe cases, these effects can lead, rapidly to stupor, coma, unconsciousness or death. Exposure to CCl4, can make the heart beat irregularly or stop. The chemical may irritate, the eyes on contact. When carbon tetrachloride is released into the air,, it rises to the atmosphere and depletes the ozone layer. Depletion of the, 317 Haloalkanes and Haloarenes, , 2020-21

Page 30 :
ozone layer is believed to increase human exposure to ultraviolet rays,, leading to increased skin cancer, eye diseases and disorders, and, possible disruption of the immune system., 10.8.5 Freons, , 10.8.6 p,p’-Dichlorodiphenyltrichloroethane(DDT), , The chlorofluorocarbon compounds of methane and ethane are collectively, known as freons. They are extremely stable, unreactive, non-toxic, noncorrosive and easily liquefiable gases. Freon 12 (CCl2F2) is one of the, most common freons in industrial use. It is manufactured from, tetrachloromethane by Swarts reaction. These are usually produced, for aerosol propellants, refrigeration and air conditioning purposes. By, 1974, total freon production in the world was about 2 billion pounds, annually. Most freon, even that used in refrigeration, eventually makes, its way into the atmosphere where it diffuses unchanged into the, stratosphere. In stratosphere, freon is able to initiate radical chain, reactions that can upset the natural ozone balance (Unit 14, Class XI)., DDT, the first chlorinated organic insecticides, was originally prepared, in 1873, but it was not until 1939 that Paul Muller of Geigy, Pharmaceuticals in Switzerland discovered the effectiveness of DDT as, an insecticide. Paul Muller was awarded the Nobel Prize in Medicine, and Physiology in 1948 for this discovery. The use of DDT increased, enormously on a worldwide basis after World War II, primarily because, of its effectiveness against the mosquito that spreads malaria and lice, that carry typhus. However, problems related to extensive use of DDT, began to appear in the late 1940s. Many species of insects developed, resistance to DDT, and it was also discovered to have a high toxicity, towards fish. The chemical stability of DDT and its fat solubility, compounded the problem. DDT is not metabolised very rapidly by, animals; instead, it is deposited and stored in the fatty tissues. If, ingestion continues at a steady rate, DDT builds up within the animal, over time. The use of DDT was banned in the United States in 1973,, although it is still in use in some other parts of the world., , Summary, Alkyl/ Aryl halides may be classified as mono, di, or polyhalogen (tri-, tetra-, etc.), compounds depending on whether they contain one, two or more halogen atoms in, their structures. Since halogen atoms are more electronegative than carbon, the carbonhalogen bond of alkyl halide is polarised; the carbon atom bears a partial positive, charge, and the halogen atom bears a partial negative charge., Alkyl halides are prepared by the free radical halogenation of alkanes, addition, of halogen acids to alkenes, replacement of –OH group of alcohols with halogens using, Chemistry 318, , 2020-21

Page 33 :
(iv), (v), (vi), (vii), (viii), (ix), (x), (xi), (xii), (xiii), (xiv), (xv), (xvi), (xvii), (xviii), (xix), (xx), , Toluene to benzyl alcohol, Benzene to 4-bromonitrobenzene, Benzyl alcohol to 2-phenylethanoic acid, Ethanol to propanenitrile, Aniline to chlorobenzene, 2-Chlorobutane to 3, 4-dimethylhexane, 2-Methyl-1-propene to 2-chloro-2-methylpropane, Ethyl chloride to propanoic acid, But-1-ene to n-butyliodide, 2-Chloropropane to 1-propanol, Isopropyl alcohol to iodoform, Chlorobenzene to p-nitrophenol, 2-Bromopropane to 1-bromopropane, Chloroethane to butane, Benzene to diphenyl, tert-Butyl bromide to isobutyl bromide, Aniline to phenylisocyanide, , 10.20 The treatment of alkyl chlorides with aqueous KOH leads to the formation of, alcohols but in the presence of alcoholic KOH, alkenes are major products. Explain., 10.21 Primary alkyl halide C4H9Br (a) reacted with alcoholic KOH to give compound (b)., Compound (b) is reacted with HBr to give (c) which is an isomer of (a). When, (a) is reacted with sodium metal it gives compound (d), C8H18 which is different, from the compound formed when n-butyl bromide is reacted with sodium., Give the structural formula of (a) and write the equations for all the reactions., 10.22 What happens when, (i), (ii), (iii), (iv), (v), (vi), , n-butyl chloride is treated with alcoholic KOH,, bromobenzene is treated with Mg in the presence of dry ether,, chlorobenzene is subjected to hydrolysis,, ethyl chloride is treated with aqueous KOH,, methyl bromide is treated with sodium in the presence of dry ether,, methyl chloride is treated with KCN?, Answers to Some Intext Questions, , 10.1, , 10.2 (i) H2SO4 cannot be used along with KI in the conversion of an alcohol to, an alkyl iodide as it converts KI to corresponding acid, HI which is then, oxidised by it to I2., 10.3 (i) ClCH2CH2CH2Cl (ii) ClCH2CHClCH3 (iii) Cl2CHCH2CH3 (iv) CH3CCl2CH3, 321 Haloalkanes and Haloarenes, , 2020-21

Page 34 :
All the hydrogen atoms are equivalent and replacement, of any hydrogen will give the same product., , 10.4, , The equivalent hydrogens are grouped as a, b and, c. The replacement of equivalent hydrogens will, give the same product., Similarly the equivalent hydrogens are grouped as, a, b, c and d. Thus, four isomeric products are, possible., 10.5, , (i) Chloromethane, Bromomethane, Dibromomethane, Bromoform., Boiling point increases with increase in molecular mass., (ii) Isopropylchloride,, 1-Chloropropane,, 1-Chlorobutane., Isopropylchloride being branched has lower b.p. than 1Chloropropane., (i) CH3CH2CH2CH2Br, Being primary halide, there won’t be any, steric hindrance., Secondary halide reacts faster than tertiary, (ii), , 10.6, , 10.7, , (iii), , 10.8, , (i), , (ii), , halide., The presence of methyl group closer to the, halide group will increase the steric, hindrance and decrease the rate., Tertiary halide reacts faster than secondary halide, because of the greater stability of tert-carbocation., Because of greater stability of secondary carbocation than, primary., , 10.9, , Chemistry 322, , 2020-21