Recommended Content

Page 1 :
Curriculum for, Diploma Programme in, , PAINT TECHNOLOGY, For the State of Uttar Pradesh, , Prepared by:, , Curriculum Development Centre, , Institute of Research Development & Training, U. P. Kanpur, , Approved and Implemented by:, BOARD OF TECHNICAL EDUCATION,LUCKNOW, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 1

Page 2 :
CONTENTS, Sr. No, -, , Particulars, Preface, Acknowledgement, Salient Features of the Diploma Programme, Employment Opportunities, Learning Outcomes of the Programme, Deriving Curriculum Areas from Learning Outcomes of the, Programme, Abstract of Curriculum Areas, Horizontal and Vertical Organization of the Subjects, Study and Evaluation Scheme, Guidelines (for Assessment of Student Centered Activities and, Internal Assessment), Detailed Contents of various Subjects, , Page No., (i), (ii), 1, 3, 4, 6, 9, 11, 12, 17, 18-142, , FIRST SEMESTER, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, , Communication Skills-I, Applied Mathematics-I, Applied Physics-I, Applied Chemistry, Engineering Drawing-I, Measuring Instruments & Measurements, General Workshop Practice-I, , 18, 21, 24, 29, 33, 36, 39, , SECOND SEMESTER, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, , Applied Mathematics-II, Applied Physics-II, Applied Mechanics, Introduction to Paint & Polymer Technology, Drying Oil, Driers, Solvent & Additives, General Workshop Practice - II, , 43, 45, 50, 54, 56, 59, , THIRD SEMESTER, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, , *Environmental Studies, *Applied Mathematics-III, Fluid Mechanics & Solid Handling, Material and Energy Balance, Pigments & Extenders, Resins & Paint Media, *Basics of Information Technology, , 62, 65, 68, 72, 75, 78, 81, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 2

Page 3 :
FOURTH SEMESTER, 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, , *Communication Skills-II, Heat Transfer Operations, Chemical Reaction Engineering & Thermodynamics, Formulation & Manufacturing of Paint, Basics of Electrical and Electronics Engineering., Universal Human Values, , 86, 89, 93, 96, 99, 102, , FIFTH SEMESTER, 5.1, 5.2, 5.3, , Industrial Training, Mass Transfer Operations, Pollution Control and Industrial Safety, Process Plant Utilities, , 106, 107, 111, 114, , 5.4, , Architectural & Industrial Coating, , 118, , 5.5, , Surface Preparation & Paint Application, , 120, , 5.6, , Renewable Energy Resources, , 123, , SIXTH SEMESTER, 6.1, 6.2, 6.3, 6.4, 6.5, 6.6, , Process Control, Coating Properties, Evaluation, Quality Control, Energy Conservation, Printing & Packaging Technology, Industrial Management and Entrepreneurship Development, Project Work, Resource Requirement, Evaluation Strategy, Recommendations for Effective Implementation of Curriculum, List of Participants, , 126, 129, 132, 137, 139, 143, 146, 161, 164, 167, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 3

Page 4 :
PREFACE, An important issue generally debated amongst the planners and educators world over is how, technical education can contribute to sustainable development of the societies struggling hard, to come in the same bracket as that of the developed nations. The rapid industrialization and, globalization has created an environment for free flow of information and technology through, fast and efficient means. This has led to shrinking of the world, bringing people from different, culture and environment together and giving rise to the concept of world turning into a global, village. In India, a shift has taken place from the forgettable years of closed economy to, knowledge based and open economy in the last few decades. In order to cope with the, challenges of handling new technologies, materials and methods, we have to develop human, resources having appropriate professional knowledge, skills and attitude. Technical education, system is one of the significant components of the human resource development and has grown, phenomenally during all these years. Now it is time to consolidate and infuse quality aspect, through developing human resources, in the delivery system. Polytechnics play an important, role in meeting the requirements of trained technical manpower for industries and field, organizations. The initiatives being taken by the Technical Education, UP to revise the existing, curricula of diploma programmes as per the needs of the industry and making them NSQF, compliant, are laudable., In order to meet the requirements of future technical manpower, we will have to revamp our, existing technical education system and one of the most important requirements is to develop, outcome-based curricula of diploma programmes. The curricula for diploma programmes have, been revised by adopting time-tested and nationally acclaimed scientific method, laying, emphasis on the identification of learning outcomes of diploma programme., The real success of the diploma programme depends upon its effective implementation., However best the curriculum document is designed, if that is not implemented properly, the, output will not be as expected. In addition to acquisition of appropriate physical resources, the, availability of motivated, competent and qualified faculty is essential for effective, implementation of the curricula., It is expected of the polytechnics to carry out job market research on a continuous basis to, identify the new skill requirements, reduce or remove outdated and redundant courses, develop, innovative methods of course offering and thereby infuse the much needed dynamism in the, system., , Manoj Kumar, Director, Institute of Research Development &Training,U. P., Kanpur, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, i

Page 5 :
ACKNOWLEDGEMENTS, We gratefully acknowledge the guidance and contribution received from the following persons:, i), , Smt.S. Radha Chauhan, IAS, Additional chief Secretary Government of U.P., Technical, Education Department, Secretariat Lucknow., , ii), , Shri Manoj Kumar, Director, Institute of Research, Development & Training U., P.,Kanpur for entrusting this project of Curriculum revision to IRDT, Kanpur, , iii), , Secretary, Board of Technical Education, U.P. for keen interest for this project of review, curriculum., , iv), , All the participants from industry/field organizations, engineering colleges, polytechnics, and other technical institutions for their professional inputs during curriculum, workshops., , v), , Prof P.K.Kamani , HOD Paint , HBTU, Kanpur for Guidance, , vi), , Dr. Arun Mathani, HBTU, Kanpur, , vii), , Dr. Promod Kumar , HBTU, Kanpur, , viii), , Sh. Shiv Charan , Manager , Maharani Paints Faridabad, , ix), , Faculty/Subject Experts from U.P. Government polytechnics as follows, , x), , Sh. Lal Ji Patel, HOD Chemical, Government Polytechnic Sarsai , Rath (Hamirpur), UP, , xi), , Sr. Rakesh Kumar , HOD Chemical , G.P.Kanpur, , xii), , Sh. Anjnee kumar Sharma, HOD, Chemical, G.P.Chandausi, Sambhal, , xiii), , Sh. S.P.Pal , HOD , Chemical (Ruber & Plastic), G.P.Badau, , xiv), , Sh. Prabhu Nath , Lecturer Chemical , G.P.Kanpur, , xv), , Sh. Vinode Sharma, Lecturer , Paint Technology , G.P.Kanpur, , Coordinator, Institute of Research Development &Training,, U. P. Kanpur, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, ii

Page 6 :
1., , SALIENT FEATURES OF DIPLOMA PROGRAMME IN PAINT, TECHNOLOGY, , 1), , Name of the Programme, , 2), , Duration of the Programme :, , Three years (Six Semesters), , 3), , Entry Qualification, , :, , Matriculation or equivalent NSQF Level as, Prescribed by State Board of Technical Education,, UP, , 4), , Intake, , :, , 60 (or as prescribed by the Board), , 5), , Pattern of the Programme, , :, , Semester Pattern, , 6), , NSQF Level, , :, , Level - 5, , :, , 50 : 50 (Approx.), , 7), Ratio between theory and, Practice, 8), Industrial Training:, , :, , Diploma Programme in Paint Technology, , Four weeks of industrial training is included after IV semester during summer vacation., Total marks allotted to industrial training will be 50., 9), , Ecology and Environment :, As per Govt. of India directives, a subject on Environmental Studies has been, incorporated in the curriculum., , 10), , Energy Conservation:, A subject on Energy Conservation has been incorporated in the curriculum., , 11), , Entrepreneurship Development:, A full subject on Industrial Management and Entrepreneurship Development has been, incorporated in the curriculum., , 12), , Student Centred Activities:, A provision of 3-6 hrs per week has been made for organizing Student Centred, Activities for overall personality development of students. Such activities will comprise, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 1

Page 7 :
of co–curricular activities such as expert lectures, self study, games, hobby classes like, photography, painting, singing etc. seminars, declamation contests, educational field, visits, NCC, NSS and other cultural activities, disaster management and safety etc., 13), , Project work, A project work has been included in the curriculum to enable the student get familiarize, with the practices and procedures being followed in the industries and provide an, opportunity to work on some live projects in the industry., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 2

Page 8 :
2., , EMPLOYMENT OPPORTUNITIES, Employment opportunities for diploma holders in Paint Technology are visualized in, following industries at various levels/positions:, , i), , Chemical and Allied Industries like, , Paint & Allied Industries, , Paint Manufacturing Indutries, , , , , , , , , , , , , Pulp and Paper industry, Polymer industry, Pharmaceutical industry, Paint and dye industry, Rubber industry, General processing industries, Glass industry, Ceramics industry, Automobile industry (paint shop and electroplating shop)\, Test Equipment : Manufacturing and repairing, Paint Applications industries. Etc., , In various functional areas like erection and commissioning of plant, plant operation, energy, conservation, plant utilities, production, water treatment, maintenance and safety, quality, control, inspection and testing, marketing and sales, consultancy services and areas concerning, environmental protection., (ii), (iii), (iv), v), , Research Organizations like CSIR laboratories, Defence laboratories, Atomic energy, establishments etc., Boards and Corporations., Entrepreneurs to small/tiny units especially food, agro and chemical industries such as, paints, soap, detergents, equipment repairing etc., Academic Institutions (as technicians/instructors at all levels), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 3

Page 9 :
3., LEARNING OUTCOMES OF DIPLOMA PROGRAMME IN PAINT, TECHNOLOGY, Sr., , Learning Outcomes, , After undergoing this programme, students will be able to:, 1, , Prepare and interpret drawings of engineering components and plants, , 2, , Read and interpret drawings related to plant layout, process equipment and, components, process flow sheets and product manufacturing., , 3, , Apply concepts of mechanics to solve chemical engineering problems, , 4, , Apply basic principles of mathematics, science and engineering to solve, chemical engineering problems, , 5, , Select various materials used in chemical processes, their properties and, specifications, , 6, , Understand various unit operations,, instrumentation in process industry, , 7, , Calculate the quantity of raw materials, energy inputs, manpower, requirement and output from the process, , 8, , Control the process and quality of the products commensurating with laid, specifications, , 9, , Recognize the need for and have the ability to engage in life long learning, , unit, , processes, , and, , process, , 10 Conduct experiments, analyze, interpret data and synthesize valid, conclusions, 11 Operate conventional machine for machining of components as per, specifications as an aid to function effectively in the process industry., 12 Use electrical and electronic instruments to measure various engineering, parameters, , 13 Use various measuring and gauging instruments, 14 Select material as per desired application, 15 Understand the general design of process equipment’s and testing, 16 Operate different utility plants, 17 Understand different renewable sources of energy and their applications., 18 Understand different plants utilities and their generation and maintenance, 19 Use various software tools for automation and process development., 20 Interpret factory acts, laws and taxes, 21 Develop communication and interpersonal skills for effective functioning in, the world of work., 22 Communicate effectively in English and local language in oral and written, form with others, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 4

Page 10 :
23 Manage resources effectively at work place, 24 Plan and execute given task/project as a team member or leader, 25 Prepare detailed project proposal and report., 26 Use computer and IT tools for creating documents, making spread sheet and, making presentation, 27 Solve real life problems by application of acquired knowledge and skills, 28 Use energy conservation methods to manage energy efficiency, 29 Use appropriate practices for conservation and prevention of environment, pollution and safety in process industries., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 5

Page 11 :
4., , DERIVING CURRICULUM AREAS FROM LEARNING OUTCOMES OF, THE PROGRAMME, The following curriculum area subjects have been derived from learning, outcomes:, , Sr., No., , Learning Outcomes, , Curriculum Areas/Subjects, , 1., , Prepare and interpret drawings of engineering, components and plants, , 2., , Read and interpret drawings related to plant -Introduction to Paint & Polymer, layout, process equipment and components, Technology, process, flow, sheets, and, product, manufacturing., Apply concepts of mechanics to solve - Applied Mechanics, engineering problems, , 3., 4., , 5., , -Engineering Drawing-I, , Apply basic principles of mathematics, science, and engineering to solve chemical engineering, problems, , - Applied Mathematics, - Applied Physics, - Applied Chemistry, - Basics of Mechanical and Civil, Engineering, - Chemical Reaction Engineering &, Thermodynamics, Select various materials used in Paint - Drying Oil, Driers, Solvent &, industries , their properties and specifications Additives, - Resigns & Paint Media, , 6., , 7., , 8., 9., , Understand various unit operations, unit - Measuring Instruments and, processes and process instrumentation in, Measurements, process industry, - Fluid Mechanics and Solid, Handling, - Heat Transfer Operations, - Mass Transfer Operations, Calculate the quantity of raw materials, energy - Material and Energy Balance, inputs, manpower requirement and output, from the process, Control the process and quality of the products - Process Control, commensurating with laid specifications, Recognize the need for and have the ability to - Student Centered Activities, engage in life long learning, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 6

Page 12 :
10., , Conduct experiments, analyses, interpret data, and synthesize valid conclusions, , - Applied Chemistry, - Chemical Reaction Engineering &, Thermodynamics, , 11., , Operate conventional machine for machining, of components as per specifications as an aid, to function effectively in the process industry., Use electrical and electronic instruments to, measure various engineering parameters, Use various measuring and gauging, instruments, Select, material, as, per, desired, application/properties evaluation for paint, , - General Workshop Practice, , 12., 13., 14., , - Basics of Electrical and Electronics, Engineering., - Measuring Instruments &, Measurements, Coating Properties, Evaluation,, Quality Control., -Formulation & Manufacturing of, Paint, , 15., 16., 17., 18., 19., , 20., 21., , 22., 23., 24., 25., 26., , 27., , -Printing & Packaging Technology, Understand the general design of process - Process Control, equipment’s and testing, Operate different utility plants, - Process Plant Utilities, - Process Control, Understand different renewable sources of - Renewable Energy Sources, energy and their applications., Understand different plants utilities and their - Process Plant Utilities, generation and maintenance, Use various techniques for automation and - Architectural & Industrial Coating, process development in paint application, industries, - - Surface Preparation & Paint, Application, Interpret factory acts, laws and taxes, - Industrial Management and, Entrepreneurship Development, Develop communication and interpersonal - Communication Skills, skills for effective functioning in the world of - Industrial Management and, work., Entrepreneurship Development, Communicate effectively in English and local - Communication Skills, language in oral and written form with others, Manage resources effectively at work place, - Project Work, Plan and execute given task/project as a team - Project Work, member or leader, Prepare detailed project proposal and report., - Project Work, Use computer and IT tools for creating - Basics of Information Technology, documents, making spread sheet and making, presentation, Solve real life problems by application of - Project Work, acquired knowledge and skills, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 7

Page 13 :
28., 29., , Use energy conservation methods to manage - Energy Conservation, energy efficiency, Use appropriate practices for conservation and - Environmental Studies, prevention of environment pollution and safety -Pollution Control and Industrial, in process industries., Safety, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 8

Page 14 :
5., , ABSTRACT OF CURRICULUM AREAS, a), , General Studies, Communication Skills, Environmental Studies, Energy Conservation, Industrial Management and Entrepreneurship Development, , b), , Applied Sciences, Applied Mathematics, Applied Physics, Applied Chemistry, , c), , Basic Courses in Engineering/Technology, Engineering Drawing, General Workshop Practice, Basics of Electrical and Electronics Engineering, Basics of Information Technology, , d), , Applied Courses in Engineering/Technology, Measuring Instruments and Measurements, Applied Mechanics, Introduction to Paint & Polymer Technology, Drying Oil, Driers, Solvent & Additives, Fluid Mechanics & Solid Handling, Material and Energy Balance, Pigments & Extenders, Resigns & Paint Media, Heat Transfer Operations, Chemical Reaction Engineering & Thermodynamics, Formulation & Manufacturing of Paint, Mass Transfer Operations, Process Plant Utilities, Pollution Control and Industrial Safety, Architectural & Industrial Coating, Surface Preparation & Paint Application, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 9

Page 15 :
Process Control, Coating Properties, Evalution , Quality Control, Printing & Packaging Tech., Industrial Training, Project Work, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 10

Page 16 :
6. HORIZONTAL AND VERTICAL ORGANISATION OF THE SUBJECTS, Sr., Subjects, Distribution in Periods per week in, No., Various Semesters, I, II, III, IV, V, VI, 1., 6, 6, Communication Skills, 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30., 31., 32., 33., 34., , Applied Mathematics, Applied Physics, Applied Chemistry, Engineering Drawing, , 5, , 5, , 5, , -, , -, , -, , 7, , 7, , -, , -, , -, , -, , 7, , -, , -, , -, , -, , -, , 8, , -, , -, , -, , -, , -, , Measuring Instruments and Measurements, , 6, 8, , 8, , -, , -, , -, , -, , -, , -, , -, , -, , 7, , -, , -, , -, , -, , Introduction to Paint & Polymer Technology, , -, , Drying Oil, Driers, Solvent & Additives, Environmental Studies, Fluid Mechanics & Solid Handling, Material and Energy Balance, Basics of Electrical and Electronics Engg, Basics of Information Technology, Pigments & Extenders, Resigns & Paint Media, Process Plant Utilities, Formulation & Manufacturing of Paint, Universal Human Values, Energy Conservation, Industrial Management and, Entrepreneurship Development, Heat Transfer Operations, Mass Transfer Operations, Pollution Control and Industrial Safety, Renewable Energy Sources, Architectural & Industrial Coating, , -, , 8, 11, , -, , -, , -, , -, , -, , -, , 5, , -, , -, , -, , -, , -, , 9, , -, , -, , -, , -, , -, , 6, , -, , -, , -, , -, , -, , -, , 9, , -, , -, , -, , -, , 6, , -, , -, , -, , -, , -, , 8, , -, , -, , -, , -, , -, , 8, , -, , -, , -, , 6, , -, , Chemical Reaction Engineering & Thermodynamics, , General Workshop Practice, Applied Mechanics, , Process Control, Surface Preparation & Paint Application, , -, , -, , -, , -, , -, , -, , -, , 8, , -, , -, , -, , -, , -, , 3, , -, , -, , -, , -, , -, , -, , -, , 5, , -, , -, , -, , -, , -, , 5, , -, , -, , -, , 9, , -, , -, , -, , -, , -, , -, , 11, , -, , -, , -, , -, , -, , 11, , -, , -, , -, , -, , 9, -, , -, , 10, , -, , -, , -, , -, , 6, , -, , 4, , 7, , 11, 6, , Coating Properties, Evalution , Quality Control, , Printing & Packaging Technology., Project Work, Student Centred Activities, , -, , -, , -, , -, , -, , 8, , 1, , 2, , 1, , 4, , 3, , 3, , Total, , 48, , 48, , 48, , 48, , 48, , 48, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 11

Page 17 :
STUDY AND EVALUATION SCHEME FOR DIPLOMA PROGRAMME IN PAINT TECHNOLOGY, FIRST SEMESTER:, STUDY, , MARKS IN EVALUATION SCHEME, , SCHEME, Sr., , SUBJECTS, , Periods/Week, , No., , L, , T, , P, , INTERNAL, ASSESSMENT, , EXTERNAL, ASSESSMENT, , Th, , Pr, , Tot, , Th, , Hrs, , Pr, , Hrs, , Tot, , 1.1, , *Communication Skills-I, , 4, , -, , 2, , 4, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 1.2, , *Applied Mathematics-1, , 5, , -, , -, , 4, , 20, , -, , 20, , 50, , 2½, , -, , -, , 50, , 70, , 1.3, , *Applied Physics-1, , 5, , -, , 2, , 5, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 1.4, , *Applied Chemistry, , 5, , -, , 2, , 5, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 1.5, , *Engineering Drawing-I, , -, , -, , 8, , 3, , -, , 40, , 40, , 60, , 3, , -, , -, , 60, , 100, , 1.6, , Measuring Instruments &, Measurements, , 4, , -, , 2, , 4, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 1.7, , General Workshop Practice 1, , -, , -, , 8, , 3, , -, , 40, , 40, , -, , -, , 60, , 4, , 60, , 100, , -, , -, , 1, , 1, , -, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 23, , -, , 25, , 29, , 100, , 150, , 250, , 310, , -, , 140, , -, , 450, , 700, , #Student Centred Activities, Total, *, , Credits, , Total, Marks, of, Internal, &, Externa, l, , Common with other diploma programmes, , # Student Centred Activities will comprise of co-curricular activities like extension lectures, games, hobby clubs e.g. photography etc.,, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities and self study etc., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 12, , seminars,

Page 18 :
APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 13

Page 19 :
SECOND SEMESTER:, STUDY, , MARKS IN EVALUATION SCHEME, , SCHEME, Sr., , SUBJECTS, , Periods/Week, , No., , L, , T, , P, , INTERNAL, ASSESSMENT, , EXTERNAL, ASSESSMENT, , Th, , Pr, , Tot, , Th, , Hrs, , Pr, , Hrs, , Tot, , 2.1, , *Applied Mathematics-II, , 5, , -, , -, , 4, , 20, , -, , 20, , 50, , 2½, , -, , -, , 50, , 70, , 2.2, , *Applied Physics-II, , 5, , -, , 2, , 5, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 2.3, , +, , 5, , -, , 2, , 5, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 2.4, , Introduction to Paint & Polymer, Technology, , 4, , 4, , 5, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 2.5, , Drying Oil, Driers, Solvent &, Additives, , 5, , 6, , 6, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 2.6, , General Workshop Practice II, , -, , 8, , 3, , -, , 40, , 40, , -, , -, , 60, , 4, , 60, , 100, , -, , 2, , 1, , -, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 24, , 24, , 29, , 100, , 110, , 210, , 250, , -, , 140, , -, , 390, , 600, , Applied Mechanics, , #Student Centred Activities, Total, *, +, #, , Credits, , Total, Marks, of, Internal, &, Externa, l, , -, , Common with other diploma programmes, Common with diploma in Mechanical Engineering and Civil Engg., Student Centred Activities will comprise of co-curricular activities like extension lectures, games, hobby clubs e.g. photography etc.,, seminars, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities and self study etc., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 14

Page 20 :
THIRD SEMESTER:, , Sr., No., , STUDY, SCHEME, Periods/Week, , SUBJECTS, , MARKS IN EVALUATION SCHEME, Credits, , L, , T, , P, , INTERNAL, ASSESSMENT, , EXTERNAL, ASSESSMENT, , Th, , Pr, , Tot, , Th, , Hrs, , Pr, , Hrs, , Tot, , Total, Marks, of, Internal, &, External, , 3.1, , *Environmental Studies, , 3, , -, , 2, , 3, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 3.2, , *Applied Mathematics-III, , 5, , -, , -, , 4, , 20, , -, , 20, , 50, , 2½, , -, , -, , 50, , 70, , 3.3, , Fluid Mechanics & Solid Handling, , 5, , -, , 4, , 6, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 3.4, , Material and Energy Balance, , 6, , -, , -, , 5, , 20, , -, , 20, , 50, , 2½, , -, , -, , 50, , 70, , 3.5, , Pigments & Extenders, , 6, , 2, , 6, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 3.6, , Resigns & Paint Media, , 4, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 3.7, , Basics of Information Technology, , -, , -, , 6, , 2, , -, , 40, , 40, , -, , -, , 60, , 3, , 60, , 100, , -, , -, , 1, , 1, , -, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 19, , 32, , 120, , 170, , 290, , 300, , -, , 230, , -, , 530, , 820, , #Student Centred Activities, Total, , 29, , * Common with other diploma Programmes, # Student Centred Activities will comprise of co-curricular activities like extension lectures, games, hobby clubs e.g. photography etc.,, seminars, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities and self study etc., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 15

Page 21 :
FOURTH SEMESTER:, , Sr., No., , STUDY, SCHEME, Periods/Week, , SUBJECTS, , MARKS IN EVALUATION SCHEME, Credits, , L, , T, , P, , INTERNAL, ASSESSMENT, , EXTERNAL, ASSESSMENT, , Th, , Pr, , Tot, , Th, , Hrs, , Pr, , Hrs, , Tot, , 4.1, , *Communication Skills-II, , 4, , -, , 2, , 4, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 4.2, , Heat Transfer Operations, , 5, , -, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 4.3, , Chemical Reaction Engineering &, Thermodynamics, , 5, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 4.4, , Formulation & Manufacturing of, Paint, , 4, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 4.5, , **Basic of Electrical and Electronics, Engineering, , 5, , -, , 4, , 6, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 4.6, , Universal Human Values, , 2, , -, , 1, , 2, , -, , 20, , 20, , -, , -, , 30, , 3, , 30, , 50, , -, , -, , 4, , 2, , -, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 23, , 29, , 100, , 180, , 280, , 250, , -, , 250, , -, , 500, , 780, , #Student Centred Activities, Total, , 25, , Note: Industrial Training for 4 weeks after fourth semester during summer vacation., *, Common with other diploma Programmes, ** Common with diploma in Computer Science and Engineering, #, , Total, Marks, of, Internal, &, Externa, l, , Student Centred Activities will comprise of co-curricular activities like extension lectures, games, hobby clubs e.g. photography etc.,, seminars, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities and self-study etc., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 16

Page 22 :
FIFTH SEMESTER:, , Sr., No., , SUBJECTS, , MARKS IN EVALUATION SCHEME, Credits, , L, , T, , P, , INTERNAL, ASSESSMENT, , EXTERNAL, ASSESSMENT, , Th, -, , Pr, -, , Tot, -, , Th, -, , Hrs, -, , Pr, 50, , Hrs, -, , Tot, 50, , Total, Marks, of, Internal, &, Externa, l, , -, , Industrial Training, , -, , -, , -, , 2, , -, , -, , -, , -, , -, , 50, , 3, , 50, , 50, , 5.1, , Mass Transfer Operations, , 5, , -, , 6, , 6, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 5.2, , Pollution Control and Industrial, Safety, , 5, , -, , 6, , 6, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 5.3, , Process Plant Utilities, , 6, , -, , -, , 5, , 20, , -, , 20, , 50, , 2½, , -, , -, , 50, , 70, , 5.4, , Architectural & Industrial Coating, , 5, , 2, , 4, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 5.5, , Surface Preparation & Paint, Application, , 4, , 2, , 4, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 5.6, , Renewable Energy Sources, , 4, , 3, , 20, , -, , 20, , 50, , 2½, , -, , -, , 50, , 70, , 3, , 1, , -, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 19, , 32, , 120, , 150, , 270, , 300, , -, , 250, , -, , 550, , 820, , #Student Centred Activities, Total, #, , STUDY, SCHEME, Periods/Week, , 29, , -, , Student Centred Activities will comprise of co-curricular activities like extension lectures, games, hobby clubs e.g. photography etc.,, seminars, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities and self study etc., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 17

Page 23 :
SIXTH SEMESTER:, , Sr., No., , STUDY, SCHEME, Periods/Week, , SUBJECTS, , MARKS IN EVALUATION SCHEME, Credits, , L, , T, , P, , -, , 4, , INTERNAL, ASSESSMENT, , EXTERNAL, ASSESSMENT, , Th, , Pr, , Tot, , Th, , Hrs, , Pr, , Hrs, , Tot, , 6, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 6.1, , Process Control, , 6, , 6.2, , Coating Properties, Evaluation,, Quality Control, , 5, , 6, , 6, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 6.3, , Energy Conservation, , 3, , 2, , 3, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 6.4, , Printing & Packaging Technology, , 6, , -, , 5, , 20, , -, , 20, , 50, , 2½, , -, , -, , 50, , 70, , 6.5, , *Industrial Management and, Entrepreneurship Development, , 5, , -, , -, , 4, , 20, , -, , 20, , 50, , 2½, , -, , -, , 50, , 70, , 6.6, , Project Work, , -, , -, , 8, , 4, , -, , 50, , 50, , -, , -, , 100, , 3, , 100, , 150, , -, , -, , 3, , 2, , -, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 23, , 30, , 100, , 170, , 270, , 250, , -, , 250, , -, , 500, , 770, , #Student Centred Activities, Total, , 25, , * Common with other diploma Programmes, , #, , Total, Marks, of, Internal, &, Externa, l, , Student Centred Activities will comprise of co-curricular activities like extension lectures, games, hobby clubs e.g. photography etc.,, seminars, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities and self study etc., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 18

Page 24 :
1.1, , COMMUNICATION SKILLS – I, L, 4, , T P, - 2, , RATIONALE, Knowledge of English Language plays an important role in career development. This subject, aims at introducing basic concepts of communication besides laying emphasis on developing, listening, speaking, reading and writing skills as parts of Communication Skill., LEARNING OUTCOMES, After undergoing the subject, the students will be able to:, .,  Understand the importance of effective communication,  Describe the process of communication,  Communicate effectively in different contexts,  Identify parts of speech,  Write correct sentences using appropriate vocabulary,  Reproduce and match words and sentences in a paragraph,  Write various types of paragraphs, notices for different purposes and composition on, picture with appropriate format,  Read unseen texts with comprehension, ., DETAILED CONTENTS, 1, , Basics of Communication, 1.1, 1.2, 1.3, 1.4, , 2, , 3, , Definition and process of communication, Types of communication - formal and informal, oral and written, verbal and, non-verbal, Communications barriers and how to overcome them, Barriers to Communication, Tools of Communication, , Application of Grammar, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, , (13 periods), , (18 periods), , Parts of Speech (Noun, verb, adjective, adverb) and modals, Sentences and its types, Tenses, Active and Passive Voice, Punctuation, Direct and Indirect Speech, , Reading Skill, , (10 periods), , Unseen passage for comprehension (one word substitution, prefixes, suffixes,, antonyms, synonyms etc. based upon the passage to be covered under this topic), APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 19

Page 25 :
4, , Writing Skill, 4.1, 4.2, 4.3, , (15 periods), , Picture composition, Writing paragraph, Notice writing, , LIST OF PRACTICALS, Note: Teaching Learning Process should be focused on the use of the language in writing, reports and making presentations., Topics such as Effective listening, effective note taking, group discussions and regular, presentations by the students need to be taught in a project oriented manner where the, learning happens as a byproduct., Listening and Speaking Exercises, 1. Self and peer introduction, 2. Newspaper reading, 3. Just a minute session-Extempore, 4. Greeting and starting a conversation, 5. Leave taking, 6. Thanking, 7. Wishing well, 8. Talking about likes and dislikes, 9. Group Discussion, 10. Listening Exercises., INSTRUCTIONAL STRATEGY, Student should be encouraged to participate in role play and other student centred activities in, class room and actively participate in listening exercises, MEANS OF ASSESSMENT,  Assignments and quiz/class tests, mid-semester and end-semester written tests,  Actual practical work, exercises and viva-voce,  Presentation and viva-voce, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 20

Page 26 :
RECOMMENDED BOOKS, 1., 2., 3., 4., 5., 6., 7., , Communicating Effectively in English, Book-I by RevathiSrinivas; Abhishek Publications,, Chandigarh., Communication Techniques and Skills by R. K. Chadha; DhanpatRai Publications,, New Delhi., High School English Grammar and Composition by Wren & Martin; S. Chand &, Company Ltd., Delhi., Excellent General English-R.B.Varshnay, R.K. Bansal, Mittal Book Depot, Malhotra, The Functional aspects of Communication Skills – Dr. P. Prsad, S.K. Katria & Sons,, New Delhi, Q. Skills for success – Level & Margaret Books, Oxford University Press., E-books/e-tools/relevant software to be used as recommended by, AICTE/UPBTE/NITTTR., , Websites for Reference:, 1., 2., 3., 4., 5., , http://www.mindtools.com/ page 8.html – 99k, http://www.letstalk.com.in, http://www.englishlearning.com, http://learnenglish.britishcouncil.org/en/, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, , Time Allotted, (Periods), 13, , Marks Allotted, (%), 24, , 2, , 18, , 32, , 3, , 10, , 16, , 4, Total, , 15, 56, , 28, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 21

Page 27 :
1.2, , APPLIED MATHEMATICS - I, L, 5, , T P, - -, , RATIONALE, Contents of this course provide fundamental base for understanding elementary mathematics, and their uses in solving engineering problems. Contents of this course will enable students to, use basic mathematical function like logarithms, partial fractions, matrices and basic 2D,, curves in solving various engineering problems of all fields., LEARNING OUTCOMES, After undergoing this course, the students will be able to:, , , , , , , , Apply Binomial theorem to solve engineering problems, Apply determinants properties and Crammer’s rule to solve engineering problems, Apply dot & cross product of vectors to find the solution of engineering problems, Use complex numbers in various engineering problems, Apply differential calculus and higher order to solve engineering problems, Find velocity, acceleration, errors and approximation in engineering problems with, application of derivatives., DETAILED CONTENTS, , 1., , Algebra -I, 1.1, 1.2, 1.3, , 2., , Series : AP and GP; Sum, nth term, Mean, Binomial theorem for positive, negative and fractional index (without proof)., Application of Binomial theorem., Determinants : Elementary properties of determinant of order 2 and 3,, Multiplication system of algebraic equation,, Consistency of equation,, Crammer's rule, , Algebra- II, 2.1, 2.2, , (12 Periods), , (12 Periods ), , Vector algebra : Dot and Cross product, Scaler and vector triple product., Complex number., Complex numbers, Representation, Modulus and amplitude Demoivre, theorem, its application in solving algebraic, equations, Mod. function, and its properties.., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 22

Page 28 :
3., , Trigonometry, 3.1, 3.2, , 4., , 4.2, , 5., , Relation between sides and angles of a triangle : Statement of various formulae, showing relationship between sides and angle of a triangle., Inverse circular functions: Simple case only, , Differential Calculus - I, 4.1, , 5.2, , (18 Periods), , Functions, limits, continuity, - functions and their graphs, range and domain,, elementary methods of finding limits (right and left), elementary test for, continuity and differentiability., Methods of finding derivative, Trigonometric functions, exponential function,, Function of a function, Logaritimic differentiation, Differentiation of Inverse, trigonometric function, Differentiation of implicit functions., , Differential Calculus - II, 5.1, , (10 Periods ), , (18 Periods), , Higher order derivatives, Leibnitz theorem (without proof). Simple, applications., Application - Finding Tangents, Normal, Points of, Maxima/Minima,, Increasing/Decreasing functions, Rate,, Measure, velocity, Acceleration,, Errors and approximation., , INSTRUCTONAL STRATEGY, The basic instructional strategy to teach basic mathematics, Binomial theorem, trigonometry,, differential equations etc. should be conceptual with real world applications of relevant branch., More numerical and theory examples can be used for clear understanding of the content., MEANS OF ASSESSMENT, -, , Assignments and Quiz/Class Tests, Mid-term and End-term Written Tests, Model/Prototype Making, , RECOMMENDED BOOKS, 1., 2., 3, 4., , Elementary Engineering Mathematics by BS Grewal, Khanna Publishers, New Delhi, Engineering Mathematics, Vol I & II by SS Sastry, Prentice Hall of India Pvt. Ltd.,, Applied Mathematics-I by Chauhan and Chauhan, Krishna Publications, Meerut., Applied Mathematics-I (A) by Kailash Sinha and Varun Kumar; Aarti Publication,, Meerut, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 23

Page 29 :
SUGGESTED DISTRIBUTION OF MARKS, Topic, 1., 2., 3., 4, 5, Total, , Time Allotted, (Periods), 12, 12, 10, 18, 18, 70, , Marks Allotted, (%), 20, 20, 12, 24, 24, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 24

Page 30 :
1.3 APPLIED PHYSICS – I, L T P, 5 - 2, RATIONALE, Applied physics includes the study of a diversified topics related to the world around us. It aims, to give an understanding of this world both by observation and by prediction of the way in, which objects behave. Concrete knowledge of physical laws, analysis and applications in, various fields of engineering and technology are given prominence in this course content., Note: Teachers should give examples of engineering/technology applications of various, concepts and principles in each topic so that students are able to learn and appreciate, these concepts and principles. In all contents, SI units should be followed., LEARNING OUTCOMES, After undergoing this course, the students must be able to:, , , , , , , , , , , , , , , Identify the use of S.I. system of measurement with accuracy and how it is used in, engineering, Represent physical quantities as scalars and vectors, applying the physical laws and, concepts of linear and circular motion in everyday life., Solve difficult problems (walking of man, horse and cart problem, flying of bird/, aircraft, etc.), Analyse and design banking of roads/railway tracks and apply conservation of, momentum principle to Explain rocket propulsion, recoil of gun etc., Derive work, power and energy relationship and solve problems about work and power., Define work, energy and power and their units., Describe conservation of energy and its applications, Understand the concept of rotational motion of a rigid body and its applications, Apply the physical laws and concepts of gravity, its variation with longitude and, latitude and its uses in space satellite etc., ., Understand the concept of elasticity, surface tension, pressure and the laws governing, movement of fluids., Express physical work in term of heat and temperature; Measure temperature in various, processes on different scales (Celsius, Kelvin, Fahrenheit etc.), Distinguish between conduction, convection and radiation, identify the different, methods for reducing heat losses, Understand the laws of thermodynamics, Carnot cycle and their applications., , DETAILED CONTENTS, 1., , Units and Dimensions, , (10 Periods), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 25

Page 31 :
1.1, 1.2, 1.3, 1.4, , 1.5, 1.6, , 1.7, , 2., , Force and Motion, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, , 2.9, , 3., , Need of Measurement in engineering and science, unit of a physical quantities, - fundamental and derived units, systems of units (FPS, CGS and SI units), Dimensions and dimensional formulae of physical quantities., Principle of homogeneity of dimensions, Dimensional equations and their applications, conversion of numerical values, of physical quantities from one system of units into another, checking the, correctness of physical equations and deriving relations among various physical, quantities, Limitations of dimensional analysis, Error in measurement, accuracy and precision of instruments, random and, systematic errors, absolute error, relative error, and percentage error, Estimation, of probable errors in the results of measurement (combination of errors in, addition, subtraction, multiplication, division and powers), rules for, representing significant figures in calculation., Application of units and dimensions in measuring length, diameter,, circumference, volume, surface area etc. of metallic and non metallic blocks,, wires, pipes etc (at least two each)., , Scalar and vector quantities – examples, representation of vector, types of, vectors, Addition and Subtraction of Vectors, Triangle and Parallelogram law, (Statement only), Scalar and Vector Product., Resolution of Vectors and its application to lawn roller., Force, Momentum, Statement and Derivation of Conservation of linear, momentum, its applications such as recoil of gun., Impulse and its Applications, Circular motion (Uniform and Non-uniform), definition of angular, displacement, angular velocity, angular acceleration, frequency, time period., Relation between linear and angular velocity, linear acceleration and angular, acceleration (related numerical), Central force, Expression and Applications of Centripetal and centrifugal forces, with examples such as banking of roads and bending of cyclist, Principle of, centrifuge., Application of various forces in lifts, cranes, large steam engines and turbines, , Work, Power and Energy, 3.1, , (10 periods), , (10 periods), , Work: and its units, examples of zero work, positive work and negative work,, conservative and non-conservative force,, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 26

Page 32 :
3.2, 3.3, 3.4, 3.5, 3.6, 3.7, 4, , Rotational Motion, 4.1, 4.2, 4.3, 4.4, , 4.5, 4.6, 4.7, 5, , 5.5, 5.6, , 6.2, 6.3, , (08 periods), , Gravitational force, Kepler’s law of planetary motion, Acceleration due gravity and its variation, Gravitational Potential and Gravitational potential energy, Motion of satellite, orbital velocity and time period of satellite, Total energy, and Binding energy of a satellite, Escape energy and escape velocity, Types of satellites, Geo-stationary satellite, semi-synchronous, polar satellite, (concept only) and their uses in science and technology, Concept of Black Holes, , Properties of Matter, 6.1, , (10 periods), , Concept of translatory and rotatory motions with examples, Definition of torque with examples, Angular momentum, Conservation of angular momentum (quantitative) and, its examples, Moment of inertia and its physical significance, radius of gyration for rigid, body, Theorems of parallel and perpendicular axes (statements only), Moment, of inertia of rod, disc, ring and sphere (hollow and solid) (Formulae only)., Concept of Fly wheel., Rotational kinetic energy, Rolling of sphere on the slant plane, Comparison of linear motion and rotational motion., Application of rotational motions in transport vehicles, and machines., , Motion of planets and satellites, 5.1, 5.2, 5.3, 5.4, , 6., , Friction: modern concept, types, laws of limiting friction, Coefficient of friction, and its Engineering Applications., Work done in moving an object on horizontal and inclined plane for rough and, plane surfaces with its applications, Energy and its units: Kinetic energy and potential energy with examples and, their derivation, work energy theorem., Principle of conservation of mechanical energy for freely falling bodies,, examples of transformation of energy., Power and its units, calculation of power in numerical problems, Application of Friction in brake system of moving vehicles, bicycle, scooter,, car trains etc., , (12 periods), , Elasticity: definition of stress and strain, different types of modulii of elasticity,, Hooke’s law, significance of stress strain curve, Pressure: definition, its units, atmospheric pressure, gauge pressure, absolute, pressure, Fortin’s Barometer and its applications, Surface tension: concept, its units, angle of contact, Capillary action and, determination of surface tension from capillary rise method, applications of, surface tension, effect of temperature and impurity on surface tension, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 27

Page 33 :
6.4, 6.5, 7., , Viscosity and coefficient of viscosity: Terminal velocity, Stoke’s law and effect, of temperature on viscosity, application in hydraulic systems., Concept of fluid motion, stream line and turbulent flow, Reynold’s number, Equation of continuity, Bernoulli’s Theorem and their applications., , Heat and Thermodynamics, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6, 7.7, 7.8, , (10, , periods), , Difference between heat and temperature, Modes of transfer of heat (Conduction, convection and radiation with examples), Different scales of temperature and their relationship, Expansion of solids, liquids and gases, coefficient of linear, surface and cubical, expansions and relation amongst them, Heat conduction in a metal rod, Temperature gradient, Concept of Co-efficient, of thermal conductivity, Uses and effects of Heat conduction in Daily life., Isothermal and Adibatic process, Zeroth, First and second law of thermodynamics, Heat engine (concept Only),, Carnot cycle., Application of various systems of thermometry in refrigeration and airconditioning etc., , LIST OF PRACTICALS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, , To find radius of wire and its volume and the maximum permissible error in these, quantities by using both vernier calipers and screw gauge., To find the value of acceleration due to gravity on the surface of earth by using a simple, pendulum., To determine the Radius of curvature of (i) convex mirror, (ii) concave mirror by, spherometer, To verify parallelogram law of forces, To study conservation of energy of a ball or cylinder rolling down an inclined plane., To find the Moment of Inertia of a flywheel about its axis of rotation, To determine the atmospheric pressure at a place using Fortin’s Barometer, To determine the viscosity of glycerin by Stoke’s method, To determine the coefficient of linear expansion of a metal rod, To determine force constant of spring using Hooks law, , INSTRUCTIONAL STATREGY, Teacher may use various teaching aids like live models, charts, graphs and experimental kits, etc. for imparting effective instructions in the subject. The teacher should explain about field, applications before teaching the basics to develop proper understanding of the physical, phenomenon. Use of demonstration and animations can make the subject interesting and may, develop scientific temper in the students. Teacher must plan a tour of Science Park/planetarium, available in nearby areas in order to enhance the interest in this course., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 28

Page 34 :
MEANS OF ASSEMENTS, , , , , , , Assignment & Quiz,, Mid-Term and End-Term written test,, Model Making,, Actual Lab & Practical Work,, Viva Voice, , RECOMMENDED BOOKS, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, , Text Book of Physics for Class XI (Part-I, Part-II); N.C.E.R.T., Delhi, Concepts in Physics by HC Verma, Vol. I & II, Bharti Bhawan Ltd. New Delhi, Comprehensive Practical Physics, Vol, I & II, JN Jaiswal, Laxmi Publications (P) Ltd.,, New Delhi, B.Sc.Practical Physics by C L Arora, S. Chand Publication.., Engineering Physics by PV Naik, Pearson Education Pvt. Ltd, New Delhi, Engineering Physics by DK Bhhatacharya & Poonam Tandan; Oxford University Press,, New Delhi, Modern Engineering Physics by SL Gupta, Sanjeev Gupta, Dhanpat Rai Publications, V. Rajendran,physics-I, Tata McGraw-Hill raw Hill publication, New Delhi, Arthur Beiser, Applied Physics, Tata McGraw-Hill raw Hill publication, New Delhi, Physics Volume 1, 5th edition, Haliday Resnick and Krane, Wiley publication, SUGGESTED DISTRIBUTION OF MARKS, Time Allotted, Marks Allotted, (Periods), (%), 1, 10, 15, 2, 10, 15, 3, 10, 15, 4, 10, 15, 5, 08, 10, 6, 12, 16, 7, 10, 14, Total, 70, 100, , Topic No., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 29

Page 35 :
1.4, , APPLIED CHEMISTRY, L T P, 5 - 2, , RATIONALE, The use of various chemicals and chemical products in diverse technical and engineering fields, have repeatedly proved the importance of Applied Chemistry, which enhances its role to a new, peak. On the other hand, ever increasing use of such materials will compel engineers,, technocrats to acquire essential applied chemistry knowledge in order to select engineering, materials, which not only suit them but also provide more environmental compatibility. This, situation demands principles of Applied Chemistry in diploma-engineering courses. Principles, of Applied Chemistry will enable budding engineers and technocrats to develop scientific, temper and appreciate physical, chemical and engineering properties of materials. Hence the, subject of Applied Chemistry., LEARNING OUTCOMES, After undergoing this subject, the student will be able to:, , , , , , , , , , , , , , , , Classify various substances based on state of aggregation, Substantiate the laws and principles on which structure of atom is established., Explain and predict properties of substances., Explain sources of water and various characteristics of water (quantitatively)., Explain cause and factors which can adversely affecting natural water quality and, remedial measures available for water purification, Think critically, develop and adapt water conservation techniques., Explain corrosion of metal and their preventive measures., explain chemical nature and causes of corrosion, apply correct and efficient methods of corrosion prevention., explain chemistry of fuels and their relative advantages., select most efficient fuel for the engine and engineering applications., suggest how to subside air pollution caused by the use of fossil fuels, explain the chemistry of various polymers and plastics, verify suitability and select polymer/rubber/plastic materials for engineering, applications., , DETAILED CONTENTS, 1., , Atomic Structure, Periodic Table and Chemical Bonding, , (14 periods), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 30

Page 36 :
1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, , 1.8, 2., , Fuels and Lubricants, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, , 3., , Fundamental particles- mass and charges of electrons, protons and neutrons, with names of the scientists who discovered these fundamental particles., Bohr’s model of atom and successes and limitations of atomic theory, (qualitative treatment only)., Atomic number, atomic mass number isotopes and isobars., Definition of orbit and orbitals, shapes of s and p orbitals only, quantum, numbers and their significance,, Aufbau’s principle, Pauli’s exclusion principle and Hund’s rule electronic, configuration of elements with atomic number (Z) = 30 only. (Electronic, configurations of elements with atomic number greater than 30 are excluded)., Modern periodic law and periodic table, groups and periods, classification of, elements into s, p, d and f blocks (periodicity in properties - excluded), Chemical bonding and cause of bonding and types such as ionic bond in NaCl, sigma (σ) and pi (π) covalent bonds in H2, HCl, Cl2, elementary idea of, hybridization in BeCl2, BF3, CH4, NH3 and H2O, VSEPR, Molecular orbital, Theory, States of Matter: Solid, Liquid & Gas, Metallic bonding- explanation with the, help of electron gas (sea) model., , Water, 3.1, 3.2, , 3.3, 3.4, 3.5, , (18 periods), , Definition of fuel, classification of fuels, characteristics of good fuel, relative, merits of gaseous, liquid and solid fuels, Calorific value-higher calorific value, lower calorific value, determination of, calorific value of solid or liquid fuel using Bomb calorimeter and numerical, examples., Coal - types of coal and proximate analysis of coal, Fuel rating – Octane number and Cetane number, fuel-structural influence on, Octane and Cetane numbers, Gaseous fuels – chemical composition, calorific value and applications of, natural gas (CNG), LPG, producer gas, water gas and biogas., Elementary ideal on – hydrogen as future fuels, nuclear fuels., Lubricants: Definition and properties, mechanism, industrial application and its, function in bearings., Synthetic lubricants and cutting fluids., (14 periods), Demonstration of water resources on Earth using pie chart., Classification of water – soft water and hard water, action of soap on hard water,, types of hardness, causes of hardness, units of hardness – mg per liter (mgL -1), and part per million (ppm) and simple numerical, pH and buffer solutions and, their applications., Disadvantages caused by the use of hard water in domestic and boiler feed, water. Primming and foaming and caustic embrittlement in boilers., Removal of hardness -Permutit process and Ion-exchange process., Physico-Chemical methods for Water Quality Testing, a) Determination of pH using pH meter, total dissolved solids (TDS), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 31

Page 37 :
3.6, 3.7, 4., , b) Testing and Estimation of- alkalinity, indicator their types and application, total hardness by EDTA method and O’Hener’s Method. (chemical reaction, of EDTA method are excluded)., c) Understanding of Indian Water Quality standards as per WHO, Natural water sterilization by chlorine and UV radiation and reverse osmosis., Municipality waste water treatment. Definition of B.O.D and C.O.D., , Electrochemistry, , (4 periods), , Redox Reaction, Electrode Potential, Nernst equation, Electrochemical cell (Galvanic, and Electrobytes); Nernst equation., 5., , Corrosion and its Control, 5.1, 5.2, 5.3, 5.4, , 6., , Definition of corrosion and factors affecting corrosion rate., Theories of, a), Dry (chemical) corrosion- Pilling Bedworth rule, b), Wet corrosion in acidic atmosphere by hydrogen evolution mechanism, Definition of passivity and galvanic series, Corrosion control:, a), Metal coatings – Cathodic protection, Cementation on Base Metal Steel, –Application of Metal Zn (Sheradizing),Cr (Chromozing) and Al, (Calorizing), Sacrificial protection and impressed current voltage, b), Inorganic coatings – Anodizing and phosphating,, c), Organic coatings - use of paints varnishes and enamels, d), Internal corrosion preventive measures- alloying (with reference to, passivating, neutralizing and inhibition) and heat treatment (quenching,, annealing), , Organic compounds, Polymers and Plastics, 6.1, 6.2, 6.3, 6.4, 6.5, , (10 periods), , (10 periods), , Classification of organic compounds and IUPAC Nomenclature, Definition of polymer, monomer and degree of polymerization, Brief introduction to addition and condensation polymers with suitable, examples (PE, PS, PVC, Teflon, Nylon -66 and Bakelite), Definition of plastics, thermo plastics and thermo setting plastics with suitable, examples, distinctions between thermo and thermo setting plastics, Applications of polymers in industry and daily life, , LIST OF PRACTICALS, 1., , 3., 4., 5., , Estimation of total hardness of water using standard EDTA solution, Estimation of total alkalinity of given water sample by titrating it against standard, sulphuric acid solution, Proximate analysis of solid fuel), Estimation of temporary hardness of water sample by O’ Hener’s Method., Determination of flash and fire point of given lubricating oil using Able’s flash point, apparatus, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 32

Page 38 :
APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 33

Page 39 :
INSTRUCTIONAL STRATEGY, Teachers may take help of various models and charts while imparting instructions to make the, concept clear. More emphasis should be laid on discussing and explaining practical, applications of various chemical process and reactions. In addition, students should be, encouraged or motivated to study those processes in more details, which may find practical, application in their future professional career., MEANS OF ASSEMENTS, , , , , , , Assignment & Quiz,, Mid-Term and End-Term written test,, Model Making,, Actual Lab & Practical Work,, Viva Voice, , RECOMMENDED BOOKS, 1., 2., 3., 4., 5., 6., , Chemistry in Engineering by J.C. Kuricose & J. Rajaram, Tata McGraw Hill,, Publishing Company Limited, New Delhi., Engineering Chemistry by P.C. Jain & Monika Jain, Dhanapat Rai Publishing, Company, New Delhi., Eagle’s Applied Chemistry - I by S. C. Ahuja & G. H. Hugar, Eagle Prakashan,, Jalandhar., Engineering Chemistry – A Text Book by H. K. Chopra & A. Parmar, Narosa, Publishing House, New Delhi., Applied Chemistry - I by Dr. P. K Vij & Shiksha Vij, Lords Publications, Jalandhar., Engineering Chemistry by Dr. Himanshu Pandey, Goel Publishing House, Meerut,, India, , SUGGESTED DISTRIBUTION OF MARKS, Topics, 1., 2., 3., 4., 5., 6., Total, , Time Allotted, (hrs), 14, 18, 14, 4, 10, 10, 70, , Marks Allotted, (%), 20, 24, 20, 6, 15, 15, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 34

Page 40 :
1.5, , ENGINEERING DRAWING - I, L T P, - - 8, , RATIONALE, Drawing is the language of engineers and technicians. Reading and interpreting engineering, drawing is their day to day responsibility. The subject is aimed at developing basic graphic, skills in the students so as to enable them to use these skills in preparation of engineering, drawings, their reading and interpretation. The emphasis, while imparting instructions, should, be to develop conceptual skills in the students following BIS SP 46 – 1988., Note:, i), ii), iii), , First angle projection is to be followed, Minimum of 18 sheets to be prepared and atleast 2 sheets on AutoCAD, Instructions relevant to various drawings may be given along with appropriate, demonstrations, before assigning drawing practice to students, , LEARNING OUTCOMES, After undergoing the subject, the students will be able to:, , , , , , , , , , , , , Identify and use of different grades of pencils and other drafting instruments which are, used in engineering field, Draw free hand sketches of various kinds of objects., Utilize various types of lines used in engineering drawing., Read and apply different dimensioning methods on drawing of objects., Use different types of scales and their utilization in reading and reproducing drawings, of objects and maps., Draw 2 - dimensional view of different objects viewed from different angles, (orthographic views), Draw and interpret complete inner hidden details of an object which are otherwise not, visible in normal view, To make projections of Solid, Generate isometric (3D) drawing from different 2D (orthographic) views/sketches, Identify conventions for different engineering materials, symbols, sections of regular, objects and general fittings used in Civil and Electrical household appliances, Use basic commands of AutoCAD., , DETAILED CONTENTS, 1., , Introduction to Engineering Drawing, 1.1, 1.2, , (03 sheets), , Introduction to drawing instruments, materials, layout and sizes of drawing, sheets and drawing boards., Different types of lines in Engineering drawing as per BIS specifications, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 35

Page 41 :
1.3, 1.4, , 2., , Dimensioning Technique, 2.1, 2.2, , 3., , 3.2, , 4.4, 4.5, 4.6, 5, , Scales –their needs and importance (theoretical instructions), type of scales,, definition of R.F. and length of scale, Drawing of plain and diagonal scales, , (02 sheets), , Definition and salient features of Solid, Types of Solid (Polyhedron and Solid of revolution), To make projections, sources, Top view, Front view and Side view of various, types of Solid., , Sections, 6.1, 6.2, , (06 sheets), , Theory of orthographic projections (Elaborate theoretical instructions), Projection of Points in different quadrant, Projection of Straight Line (1st and 3rd angle), 4.3.1. Line parallel to both the planes, 4.3.2. Line perpendicular to any one of the reference plane, 4.3.3. Line inclined to any one of the reference plane., Projection of Plane – Different lamina like square, rectangular, triangular and, circle inclined to one plane, parallel and perpendicular to another plane in 1 st, angle only, Three views of orthographic projection of different objects. (At least one sheet, in 3rd angle), Identification of surfaces, , Projection of Solid, 5.1., 5.2., 5.3, , 6., , (02 sheets), , Orthographic Projections, 4.1, 4.2, 4.3, , (01 sheet), , Necessity of dimensioning, method and principles of dimensioning (mainly, theoretical instructions), Dimensioning of overall sizes, circles, threaded holes, chamfered surfaces,, angles, tapered surfaces, holes, equally spaced on P.C.D., counter sunk holes,, counter bored holes, cylindrical parts, narrow spaces and gaps, radii, curves, and arches, , Scales, 3.1, , 4., , Practice of vertical, horizontal and inclined lines, geometrical figures such as, triangles, rectangles, circles, ellipses and curves, hexagonal, pentagon with the, help of drawing instruments., Free hand and instrumental lettering (Alphabet and numerals) – upper case, (Capital Letter), single stroke, vertical and inclined at 75 degree, series of 5,8,12, mm of free hand and instrumental lettering of height 25 to 35 mm in the ratio, of 7:4, , (02 sheets), , Importance and salient features, Drawing of full section, half section, partial or broken out sections, Offset, sections, revolved sections and removed sections., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 36

Page 42 :
6.3, 6.4, 7., , Isometric Views, 7.1, 7.2, , 8., , (02 sheets), , Fundamentals of isometric projections and isometric scale., Isometric views of combination of regular solids like cylinder, cone, cube and, prism., , Common Symbols and Conventions used in Engineering, 8.1, 8.2, , *9., , Convention sectional representation of various materials, conventional breaks, for shafts, pipes, rectangular, square, angle, channel, rolled sections, Orthographic sectional views of different objects., , (02 sheets), , Civil Engineering sanitary fitting symbols, Electrical fitting symbols for domestic interior installations, , Introduction to AutoCAD, , (02 sheets), , Basic introduction and operational instructions of various commands in AutoCAD. At, least two sheets on AutoCAD of cube, cuboid, cone, pyramid, truncated cone and, pyramid, sphere and combination of above solids., * Auto CAD drawing will be evaluated internally by sessional marks and not by final, theory paper., INSTRUCTIONAL STRATEGY, Teacher should show model of realia of the component/part whose drawing is to be made., Emphasis should be given on cleanliness, dimensioning and layout of sheet. Focus should be, on proper selection of drawing instruments and their proper use. The institute should procure, AutoCAD or other engineering graphics software for practice in engineering drawings., Teachers should undergo training in AutoCAD/Engineering Graphic. Separate labs for practice, on AutoCAD should be established., MEANS OF ASSESSMENT, , , , , Sketches, Drawing, Use of software, , RECOMMENDED BOOKS, 1., 2., 3., 4., 5., , A Text Book of Engineering Drawing by Surjit Singh; Dhanpat Rai & Co., Delhi, Engineering Drawing by PS Gill; SK Kataria & Sons, New Delhi, Elementary Engineering Drawing in First Angle Projection by ND Bhatt; Charotar, Publishing House Pvt. Ltd., Anand, Engineering Drawing I & II by JS Layall; Eagle Parkashan, Jalandhar, Engineering Drawing I by DK Goel, GBD Publication., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 37

Page 43 :
1.6 MEASURING INSTRUMENTS AND MEASUREMENTS, L, 4, , T, -, , P, 2, , RATIONALE, The subject of Measuring Instruments and Measurements provides the students necessary, knowledge about calibrating, conducting experiments or handling various measuring, instruments like Pressure Gauges, Thermometers, Pyrometers, Level Indicators etc., LEARNING OUTCOMES, After undergoing this course, the students will be able to:, , , , , , Understand various process instrumentation in process industry, Operate various measuring instruments like pressure gauge, thermometer, etc., Find errors and test various instruments and justify their use in systems and improve, productivity., Select instruments for various applications., DETAILED CONTENTS, , 1., , Introduction and Classification of Instruments, , (12 Periods), , Importance of instruments in chemical process industries, General classification of, industrial instruments, Functional elements of instruments, Indicating and recording, type instruments, Static and dynamic characteristics of instruments, Description and, constructional details, working principle, Ranges and applications of Strip chart, recorder, Circular chart recorder, Thermal conductivity measuring instrument., 2., , Pressure Measurements, , (12 Periods), , Absolute, Gauge and Vacuum pressure, Liquid column gauge, Bourden tube gauge,, McLeod gauge, Ionization gauge., 3., , Temperature Measurement, , (12 Periods), , Temperature scales, Bimetallic thermometer, Liquid expansion thermometer,, Thermocouples, Resistance thermometer, Optical and radiation pyrometers,, Thermistor., 4., , Liquid-Level Meters, , (12 Periods), , Visual indicators, Float actuated instrument, the-bubbler system, diaphragm box and, air trap systems, electrical contact type liquid level indicators. Hydrostatic head density, compensator level meter, hydro step, Radar or microwave level indicator, Ultrasonic or, sonic level indicator., 5., , Mass and Weight Measurement, , (08 periods), , Two-pan balance and single pan mechanical balances, Single pan electronic balance., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 38

Page 44 :
LIST OF PRACTICALS, 1. Calibration of Pressure Gauge, 2. Calibration of Thermister, 3. Calibration of Thermocouple for temperature measurement, 4. Calibration of McLeod Gauge for low pressure, 5. Calibration of Optical pyrometer., 6. Sketch of single pan electronic balance., 7. Measurement of pressure using Bourden tube., 8. Sketch of diaphragm and air trap system., INSTRUCTONAL STRATEGY, This subject gives the knowledge of various instruments used to measure various process, parameters. So the theoretical knowledge of this subject should be properly imparted to the, students with the help of practical examples. The teacher should use audio-visual aids to, show the working of these instruments., MEANS OF ASSESSMENT, -, , Assignments and Quiz/Class Tests, End-term Written Tests, Laboratory Work, Viva-Voce, , RECOMMENDED BOOKS, 1., , Industrial Instrumentation by Donald.P. Eckmann; CBS., 2004, , 2., , Industrial instrumentation and Control by S.K. Singh; Tata McGraw , 20016, , 3., , Industrial instrumentation, K. Krishnaswamy; New Age International., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 39

Page 45 :
SUGGESTED DISTRIBUTION OF MARKS, Topic, 1., , Time Allotted, (Periods), 12, , Marks Allotted, (%), 22, , 2., , 12, , 22, , 3., , 12, , 20, , 4, , 12, , 22, , 5, , 08, , 14, , Total, , 56, , 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 40

Page 46 :
1.7 GENERAL WORKSHOP PRACTICE – I, (Common for Civil Engineering, Electrical Engineering and Chemical Engineering ), L T P, - - 8, RATIONALE, In order to have a balanced overall development of diploma engineers, it is necessary to, integrate theory with practice. General workshop practices are included in the curriculum in, order to provide hands-on experience about use of different tools and basic manufacturing, practices. This subject aims at developing general manual and machining skills in the students., In addition, the development of dignity of labour, safety at work place, team working and, development of right attitude are the other objectives., LEARNING OUTCOMES, After completing the course, the students will be able to:, , , , , , , , , , Identify tools and equipment used and their respective functions., Identify different types of materials and their basic properties., Use and take measurements with the help of basic measuring tools/equipment., Select proper tools for a particular operation., Select materials, tools, and sequence of operations to make a job as per given, specification/drawing., Prepare simple jobs independently and inspect the same., Follow safety procedures and precautionary measures., Use safety equipment and Personal Protection Equipment., DETAILED CONTENTS, , Note:, , The students are supposed to come in proper workshop dress prescribed by the, institute. Wearing shoes in the workshop(s) is compulsory. Importance of safety and, cleanliness, safety measures and upkeep of tools, equipment and environment in each, of the following shops should be explained and practiced. The students should prepare, sketches of various tools/jobs in their practical Notebook., , The following shops are included in the syllabus:, 1., 2., 3., 4., 5., , Carpentry Shop, Painting and Polishing Shop, Electrical Shop, Welding Shop, Plumbing Shop, , 1. CARPENTRY SHOP, 1.1, , General Shop Talk, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 41

Page 47 :
1.1.1, 1.1.2, , 1.1.3, 1.1.4, 1.1.5, , Name and use of raw materials used in carpentry shop : wood &, alternative materials, Names, uses, care and maintenance of hand tools such as different types, of Saws, C-Clamp, Chisels, Mallets, Carpenter's vices, Marking gauges,, Try-squares, Rulers and other commonly used tools and materials used, in carpentry shop by segregating as cutting tools, supporting tools,, holding tools , measuring tools etc., Specification of tools used in carpentry shop., Different types of Timbers, their properties, uses & defects., Seasoning of wood., , 1.2., , Practice, 1.2.1 Practices for Basic Carpentry Work, 1.2.2 Sawing practice using different types of saws, 1.2.3 Assembling jack plane — Planning practice including sharpening of, jack plane cutter, 1.2.4 Chiselling practice using different types of chisels including sharpening, of chisel, 1.2.5 Making of different types of wooden pin and fixing methods. Marking, measuring and inspection of jobs., , 1.3, , Job Practice, Job 1, Job II, Job III, Job IV, , 1.4., , Marking, sawing, planning and chiselling and their practice, Half Lap Joint (cross, L or T – any one), Mortise and Tenon joint (T-Joint), Dove tail Joint (Lap or Bridle Joint), , Demonstration of job showing use of Rip Saw, Bow saw and Tenon saw,, method of sharpening various saws., , 2. PAINTING AND POLISHING SHOP, 2.1., , Introduction of paints, varnishes, Reason for surface preparation, Advantages, of Painting, other method of surface coating ie. Electroplating etc., , 2.2., , Job Practice, Job 1: To prepare a wooden surface for painting apply primer on one side and, to paint the same side. To prepare french polish for wooden surface and, polish the other side., Job II: To prepare metal surface for painting, apply primer and paint the same., Job III: To prepare a metal surface for spray painting, first spray primer and, paint the same by spray painting gun and compressor system., , The sequence of polishing will be as follows:, i), ii), , Abrasive cutting by leather wheel, Polishing with hard cotton wheel and with polishing material, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 42

Page 48 :
iii), , Buffing with cotton wheel or buff wheel., , 3., , ELECTRICAL SHOP, , 3.1, , Study, demonstration and identification of common electrical materials with, standard ratings and specifications such as wires, cables, switches, fuses, cleats,, clamps and allied items, tools and accessories., Study of electrical safety measures and protective devices., Job I, Identification of phase, Neutral and Earth wires for connection, to domestic electrical appliances and their connections to three, pin plugs., Job II, Carrying out house wiring circuits using fuse, switches, sockets,, ceiling rose etc. in batten or P.V.C. casing-caping., Study of common electrical appliances such as auto electric iron, electric kettle,, ceiling/table fan, desert cooler etc., Introduction to the construction of lead acid battery and its working., Job III, Installation of battery and connecting two or three batteries in, series and parallel., Introduction to battery charger and its functioning., Job IV, Charging a battery and testing with hydrometer and cell, tester, , 3.2, , 3.3, 3.4, 3.5, , 4., , WELDING SHOP, 4.1, , Introduction and importance of welding as compared to other material joining, processes. Specifications and type of welding machines, classification and, coding of electrodes, welding parameters, welding joints and welding positions., Materials to be welded, safety precautions., , 4.2, , Job Practice, Job I, Job II, Job III, Job IV, , Practice of striking arc (Minimum 4 beads on 100 mm long M.S., flat)., Practice of depositing beads on plate at different current levels., (Minimum 4 beads on M.S. plate at four setting of current level)., Preparation of lap joint using arc welding process., Preparation of T-joint using gas welding or arc welding, on, 100 mm x 6 mm MS Flat, , 5. PLUMBING SHOP, 5.1., 5.2., 5.3., 5.4., , Use of personal protective equipments, safety precautions while working and, cleaning of shop., Introduction and demonstration of tools, equipment and machines used in, plumbing shop., Introduction of various pipes and pipe fittings of elbow, nipple, socket, union, etc., Job Practice, Job 1 : Preparation of job using elbow, bend and nipple, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 43

Page 49 :
Job II: Preparation of job using Union, Tap, Plug and Socket., Job III: Threading practice on pipe with die, MEANS OF ASSESSMENT,  Workshop jobs,  Report writing, presentation and viva voce, RECOMMENDED BOOKS, 1., 2., 3., 4., 5., 6., 7., , Workshop Technology I,II,III, by SK Hajra, Choudhary and AK Choudhary; Media, Promoters and Publishers Pvt. Ltd. Mumbai., Workshop Technology Vol. I, II, III by Manchanda; India Publishing House, Jalandhar., Workshop Training Manual Vol. I, II by S.S. Ubhi; Katson Publishers, Ludhiana., Manual on Workshop Practice by K Venkata Reddy; MacMillan India Ltd., New Delhi, Basic Workshop Practice Manual by T Jeyapoovan; Vikas Publishing House (P) Ltd.,, New Delhi, Workshop Technology by B.S. Raghuwanshi; Dhanpat Rai and Co., New Delhi, Workshop Technology by HS Bawa; Tata McGraw Hill Publishers, New Delhi., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 44

Page 50 :
2.1, , APPLIED MATHEMATICS - II, L, 5, , T P, -, , RATIONALE, Basic elements of integral calculus, differential calculus, numerical methods, differential m, equations included in this course will play a vital role in understanding engineering problem, mathematically. This will also develop analytical as well as conceptual abilities among, students., LEARNING OUTCOMES, After undergoing this course, the students will be able to:,  Calculate simple integration by methods of integration,  Evaluate the area under curves, surface by using definite integrals.,  Calculate the area and volume under a curve along areas,  Solve the engineering problems with numerical methods.,  Understand the geometric shapes used in engineering problems by co-ordinate, geometry., DETAILED CONTENTS, 1. Integral Calculus - I, , (20 Periods), , Methods of Indefinite Integration, 1.1, 1.2, 1.3, 1.4, 1.5, , Integration by substitution., Integration by rational function., Integration by partial fraction., Integration by parts., Integration of special function, , 2. Integral Calculus - II, 2.1, 2.2, 2.3, , (20 Periods), , Meaning and properties of definite integrals, Evaluation of definite integrals., Application : Length of simple curves, Finding areas bounded by simple, curves Volume of solids of revolution, centre of mean of plane areas., Simposns 1/3rd and Simposns3/8th rule and Trapezoidal Rule : their application, in simple cases. Numerical solutions of algebraic equations; Bisections, method, Regula-Falsi method, Newton-Raphson’s method(without proof),, Numerical solutions of simultaneous equations; Gauss elimination, method(without proof), , 3. Co-ordinate Geometry (2 Dimension), , (18 Periods), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 45

Page 51 :
3.1, , Circle, Equation of circle in standard form. Centre - Radius form, Diameter form,, Two intercept form., , 4. Co-ordinate Geometry (3 Dimension), , (12 Periods), , 4.1 Straight lines and planes in space, Distance between two points in space, direction cosine and direction ratios,, Finding equation of a straight line (without proof), INSTRUCTONAL STRATEGY, Basic elements of Differential Calculus, Integral Calculus and differential equations can be, taught conceptually along with real engineering applications in which particular algorithm and, theory can be applied. Numerical examples will be helpful in understanding the content of the, subject., MEANS OF ASSESSMENT, -, , Assignments and Quiz/Class Tests, Mid-term and End-term Written Tests, Model/Prototype Making, , RECOMMENDED BOOKS, 1., 2., 3, 4., , Elementary Engineering Mathematics by BS Grewal, Khanna Publishers, New Delhi, Engineering Mathematics, Vol I & II by SS Sastry, Prentice Hall of India Pvt. Ltd.,, Applied Mathematics-II by Chauhan and Chauhan, Krishna Publications, Meerut., Applied Mathematics-I (B) by Kailash Sinha and Varun Kumar; Aarti Publication,, Meerut, SUGGESTED DISTRIBUTION OF MARKS, Topic, , Time Allotted, (Periods), , Marks Allotted, (%), , 1., 2., 3., 4, Total, , 20, 20, 18, 12, 70, , 28, 28, 24, 20, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 46

Page 52 :
2.2 APPLIED PHYSICS – II, L T P, 5 - 2, RATIONALE, Applied physics includes the study of a diversified topics related to the world around us. It aims, to give an understanding of this world both by observation and by prediction of the way in, which objects behave. Concrete knowledge of physical laws, analysis and applications in, various fields of engineering and technology are given prominence in this course content., Note: Teachers should give examples of engineering/technology applications of various, concepts and principles in each topic so that students are able to learn and appreciate, these concepts and principles. In all contents, SI units should be followed., LEARNING OUTCOMES, After undergoing this subject, the student will be able to;, , , , , , , , , , , , , , , , , , Define wave motion its types (Transverse and Longitudinal), Periodic and Simple, Harmonic Motion, solve simple problems., Define the terms: frequency, amplitude, wavelength, velocity of a wave., Explain various Engineering, Medical and Industrial applications of Ultrasonics., Apply acoustics principles to various types of buildings to get best sound effect, Explain diffraction, interference, polarization., Define capacitance and its unit. They will be able to explain the function of capacitors, in simple circuits, solve simple problems using C=Q/V, Explain the role of free electrons in insulators, conductors and semiconductors,, qualitatively the terms: potential, potential difference, electromotive force., Explain the concept of electric current, resistance and its measurement., List the effects of an electric current and their common applications, State and apply, Ohm's law, calculate the equivalent resistance of a variety of resistor combinations,, determine the energy consumed by an appliance, distinguish between AC and DC, electricity, Explain Biot-Savart Law, Ampere’s law, Lorenz Force., State the laws of electromagnetic induction, describe the effect on a current-carrying, conductor when placed in a magnetic field, Explain operation of moving coil galvanometer, simple DC motor, Apply the knowledge of diodes in rectifiers, adapters IC’s and various electronic, circuits. Apply the concept of light amplification in designing of various LASER based, instruments and optical sources., Explain total internal reflection and apply this concept for optical fibre and its uses in, Medical field and Communication., DETAILED CONTENTS, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 47

Page 53 :
1., , Wave motion and its applications, 1.1, , 1.2, 1.3, , 1.4, 1.5, , 1.6, 2., , 2.2, 2.3, 2.4, 2.5, 3., , 3.2, 3.3, 3.4, 3.5, , (6 periods), , Dual nature of light, wave theory of light, laws of reflection and refraction,, Snell’s law, Power of lens, magnification., Two-Source Interference, Double-Slit interference, Interference due to thin films,, Fresnel’s biprism., use of interference making highly efficient solar panel., diffraction, Single Slit diffraction, Intensity calculation etc, Polarization of electromagnetic waves, polarizing sheets, polarizing by, Reflection (Brewser’s law), Malus law, use of polariods., , Electrostatics, 3.1, , 4., , Wave motion, transverse and longitudinal wave motion with examples, sound, and light waves, relationship among wave velocity, frequency and wave length, and its application, Wave equation y = r sin wt, phase, phase difference, principle of superposition, of waves, Simple Harmonic Motion (SHM): definition and characteristic, expression for, displacement, velocity, acceleration, time period, frequency in S.H.M., Energy, of a body executing S. H. M., simple pendulum, concept of simple harmonic, progressive wave,, Free, Damped and forced oscillations, Resonance with examples, Q-factor, Definition of pitch, loudness, quality and intensity of sound waves, intensity, level, Echo and reverberation, Sabine formula for reverberation time(without, derivation), coefficient of absorption of sound, methods to control reverberation, time and their applications, Accoustics of building defects and remedy., Ultrasonics –production, detection, properties and applications in engineering, and medical applications., , Wave Optics, 2.1, , (12 periods), , (12 periods), , Concept of charge, Coulombs law, Electric field of point charges, Electric lines, of force and their properties, Electric flux, Electric potential and potential, difference., Gauss law of electrostatics: Application of Gauss law to find electric field, intensity of straight charged conductor, plane charged sheet and charged sphere., Capacitor and its working principle, Capacitance and its units. Capacitance of, parallel plate capacitor. Series and parallel combination of capacitors, (numericals), charging and discharging of a capacitor., Dielectric and its effect on capacitance, dielectric break down., Application of electrostatics in electrostatic precipitation of microbes and, moisture separation from air and gases in industry for pollution control (Brief, explanation only), , Current Electricity, , (12 periods), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 48

Page 54 :
4.1, , 4.2, 4.3, 4.4, 4.5, 5., , Magneto Statics and Electromagnetism, 5.1, 5.2, 5.3, 5.4, 5.5, 5.6, , 6., , 6.2, 6.3, 6.4, , 7.2, , 7.3, , (8 periods), , Types of materials (insulator, semi conductor, conductor), intrinsic and extrinsic, semiconductors, p-n junction diode and its V-I characteristics, Diode as rectifier – half wave and full wave rectifier (centre taped),, Semiconductor transistor, pnp and npn (concepts only), Application of semiconductor diodes (Zener, LED) and that of transistor as, amplifier and oscillator., , Modern Physics, 7.1, , (12 periods), , Magnetic poles, force on a moving charge, circulating charges, force on a, current carrying wire, Hall effect, torque on a current loop., Magnetic field due to moving charge(Biot-Savart Law), due to current (BiotSavart Law), parallel currents, field of a solenoid, Ampere’s law., Faraday’s law, Lenz’ law, motional emf, induced electric fields., Magnetic dipole and force on a magnetic dipole in a non-uniform field,, Magnetization, Gauss’ law for magnetism., Types of magnetic materials. Dia, para and ferromagnetic materials with their, properties,, Application of electromagnetism in ac/dc motors and generators., , Semiconductor physics, 6.1, , 7., , Electric Current, Resistance, Specific Resistance, Conductance, Specific, Conductance, Series and Parallel combination of Resistances. Factors affecting, Resistance, Colour coding of carbon Resistances, Ohm’s law., Superconductivity., Kirchhoff’s laws, Wheatstone bridge and its applications (meter bridge and, slide wire bridge), Concept of terminal potential difference and Electro motive force (EMF),, potentiometer., Heating effect of current, Electric power, Electric energy and its units (related, numerical problems), Advantages of Electric Energy over other forms of energy, Examples of application of DC circuits in various electrical and electronics, equipment such as C.R.O, T.V., Audio-Video System, Computers etc., , (8 Periods), , Lasers: concept of energy levels, ionizations and excitation potentials;, spontaneous and stimulated emission; laser and its characteristics, population, inversion, Types of lasers; Ruby and He-Ne lasers, engineering and medical, applications of lasers., Fibre optics: Total internal reflection and its applications, Critical angle and, conditions for total internal reflection, introduction to optical fibers, light, propagation, types, acceptance angle and numerical aperture, types and, applications of optical fibre in communication., Introduction to nanotechnology, nanoparticles and nano materials,, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 49

Page 55 :
LIST OF PRACTICALS (To perform minimum six experiments), 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., , To determine the velocity of sound with the help of resonance tube., To find the focal length of convex lens by displacement method., To find the refractive index of the material of given prism using spectrometer., To find the wavelength of sodium light using Fresnel’s biprism., To verify laws of resistances in series and parallel combination, To verify ohm’s laws by drawing a graph between voltage and current., To measure very low resistance and very high resistances using Slide Wire bridge, Conversion of Galvanometer into an Ammeter and Voltmeter of given range., To draw hysteresis curve of a ferromagnetic material., To draw characteristics of a pn junction diode and determine knee and break down, voltages., To find wave length of the laser beam., To find numerical aperture of an optical fiber., , INSTRUCTIONAL STATREGY, Teacher may use various teaching aids like live models, charts, graphs and experimental kits, etc. for imparting effective instructions in the subject. The teacher should explain about field, applications before teaching the basics to develop proper understanding of the physical, phenomenon. Use of demonstration and animations can make the subject interesting and may, develop scientific temper in the students. Teacher must plan a tour of Science Park/planetarium, available in nearby areas in order to enhance the interest in this course., MEANS OF ASSESSMENT, , Assignment & Quiz, , Mid-Term and End-Term written test, , Model Making, , Actual Lab & Practical Work, , Viva-Voice, RECOMMENDED BOOKS, 1., 2., 3., 4., 5., 6., 7., 8., , Text Book of Physics (Part-I, Part-II); N.C.E.R.T., Delhi, Concepts in Physics by HC Verma, Vol. I & II, Bharti Bhawan Ltd. New Delhi, A Text Book of Optics, Subramanian and Brij Lal, S Chand & Co., New Delhi, Practical Physics, by C. L. Arora, S Chand publications, Engineering Physics by PV Naik, Pearson Education Pvt. Ltd, New Delhi, Modern Engineering Physics by SL Gupta, Sanjeev Gupta, Dhanpat Rai Publications., Physics Volume 2, 5th edition, Haliday Resnick and Krane, Wiley publication, Fundamentals of Physics by Haliday, Resnick & Walker 7th edition, Wiley publication, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 50

Page 56 :
SUGGESTED DISTRIBUTION OF MARKS, Topic No., , Time Allotted, (Periods), , Marks Allotted, (%), , 1, 2, 3, 4, 5, 6, 7, Total, , 12, 6, 12, 12, 12, 8, 8, 70, , 18, 8, 18, 16, 16, 12, 12, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 51

Page 57 :
2.3, , APPLIED MECHANICS, L, 5, , T, -, , P, 2, , RATIONALE, The subject Applied Mechanics deals with basic concepts of mechanics like laws of forces,, moments, friction, centre of gravity, laws of motion and simple machines which are required, by the students for further understanding of other allied subjects. The subject enhances the, analytical ability of the students., LEARNING OUTCOMES, After undergoing this course, the students will be able to:,  Interpret various types of units and their conversion from one to another.,  Analyze different types of forces acting on a body and draw free body diagrams.,  Determine the resultant of coplanar concurrent forces.,  Calculate the co-efficient of friction for different types of surfaces.,  Calculate the least force required to maintain equilibrium on an inclined plane.,  Determine the centroid/centre of gravity of plain and composite laminar and solid, bodies.,  Determine velocity ratio, mechanical advantage and efficiency of simple machines, 1., , DETAILED CONTENTS, Introduction, (06 periods), 1.1, Concept of engineering mechanics definition of mechanics, statics, dynamics,, application of engineering mechanics in practical fields. Definition of Applied, Mechanics., 1.2, , Definition, basic quantities and derived quantities of basic units and derived, units, , 1.3, , Different systems of units (FPS, CGS, MKS and SI) and their conversion from, one to another for density, force, pressure, work, power, velocity, acceleration, , 1.4, 2., , Concept of rigid body, scalar and vector quantities, , Laws of forces, (12 periods), 2.1, Definition of force, measurement of force in SI units, its representation, types, of force: Point force/concentrated force & Uniformly distributed force, effects, of force, characteristics of a force, 2.2, , Different, , force, , systems, , (coplanar, , and, , non-coplanar),, , principle, , of, , transmissibility of forces, law of superposition, 2.3, , Composition and resolution of coplanar concurrent forces, resultant force,, method of composition of forces, laws of forces, triangle law of forces, polygon, law of forces - graphically, analytically, resolution of forces, resolving a force, into two rectangular components, , 2.4, , Free body diagram, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 52

Page 58 :
3., , 2.5, , Equilibrant force and its determination, , 2.6, , Lami's theorem (concept only), , [Simple problems on above topics], 2.7, Type of Load, supports, Beams- analysis for simply supported, cantilever beams, Moment, (14 periods), 3.1, Concept of moment, 3.2, , Moment of a force and units of moment, , 3.3, , Varignon's theorem (definition only), , 3.4, , Principle of moment and its applications (Levers – simple and compound,, steel yard, safety valve, reaction at support), , 3.5, 3.6, 3.7, 3.8, , 4., , Parallel forces (like and unlike parallel force), calculating their resultant, Concept of couple, its properties and effects, General conditions of equilibrium of bodies under coplanar forces, Position of resultant force by moment, [Simple problems on the above topics], Friction, (14 periods), 4.1, Definition and concept of friction, types of friction, force of friction, 4.2, 4.3, , 4.4, , 5., , Laws of static friction, coefficient of friction, angle of friction, angle of repose,, cone of friction, Equilibrium of a body lying on a horizontal plane, equilibrium of a body lying, on a rough inclined plane., Calculation of least force required to maintain equilibrium of a body on a rough, inclined plane subjected to a force:, a) Acting along the inclined plane Horizontally, b) At some angle with the inclined plane, , Centre of Gravity, (10 periods), 5.1, Concept, definition of centroid of plain figures and centre of gravity of, symmetrical solid bodies, 5.2, , Determination of centroid of plain and composite lamina using moment method, only, centroid of bodies with removed portion, , 5.3, , Determination of center of gravity of solid bodies - cone, cylinder, hemisphere, and sphere; composite bodies and bodies with portion removed, [Simple problems on the above topics], , 6., , Simple Machines, (14 periods), 6.1. Definition of effort, velocity ratio, mechanical advantage and efficiency of a, machine and their relationship, law of machines, 6.2., , Simple and compound machine (Examples), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 53

Page 59 :
6.3., , Definition of ideal machine, reversible and self locking machine, , 6.4., , Effort lost in friction, Load lost in friction, determination of maximum, mechanical advantage and maximum efficiency, , 6.5., , System of pulleys (first, second, third system of pulleys), determination of, velocity ratio, mechanical advantage and efficiency, , 6.6., , Working principle and application of wheel and axle, Weston’s Differential, Pulley Block , simple screw jack, worm and worm wheel, single and double, winch crab. Expression for their velocity ratio and field of their application, [Simple problems on the above topics], , LIST OF PRACTICALS, 1., Verification of the polygon law of forces using gravesend apparatus., 2., To verify the forces in different members of jib crane., 3., To verify the reaction at the supports of a simply supported beam., 4., To find the mechanical advantage, velocity ratio and efficiency in case of an inclined, plane., 5., To find the mechanical advantage, velocity ratio and efficiency of a screw jack., 6., To find the mechanical advantage, velocity ratio and efficiency of worm and, worm wheel., 7., To find mechanical advantage, velocity ratio and efficiency of single purchase crab., 8., , To find out center of gravity of regular lamina., , 9., , To find out center of gravity of irregular lamina., , 10., , To determine coefficient of friction between three pairs of given surface., , INSTRUCTIONAL STRATEGY, Applied Mechanics being a fundamental subject, the teacher are expected to emphasize on the, application of “Applied Mechanics” in various subjects so that students are able to appreciate, the importance of the subject. Students should also be made conversant with the use of, scientific calculator to solve numerical problems, MEANS OF ASSESSMENT, Assignments and quiz/class tests, mid and end-term written tests, model/prototype making., RECOMMENDED BOOKS, 1., A Text Book of Applied Mechanics by S Ramamurtham,Dhanpat Rai Publishing Co., Ltd., 2., , A Text Book of Engineering Mechanics (Applied Mechanics) by RK Khurmi; S Chand, and Co. Ltd., New Delhi., , 3., , A Text Book of Applied Mechanics by RK Rajput; Laxmi Publications, New Delhi.., , 4., , Text Book of Applied Mechanics by Birinder Singh, Kaption Publishing House, New, Delhi., , 5., , Test Book of Applied Mechanics by AK Upadhya, SK Kataria & Sons, New Delhi, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 54

Page 60 :
SUGGESTED DISTRIBUTION OF MARKS, Topic No. Time Allotted (Hrs) Marks Allotted (%), 1, 06, 8, 2, 12, 18, 3, 14, 20, 4, 14, 20, 5, 10, 14, 6, 14, 20, Total, 70, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 55

Page 61 :
2.4 INTRODUCTION TO PAINT & POLYMER TECHNOLOGY, L, 4, , T, -, , P, 4, , RATIONALE, In this subject Students will get to know the basic knowledge of Paint as material , and, different types of polymers and polymerization techniques to get the film formers., LEARNING OUTCOMES, After undergoing this Subject, the students will be able to:,  Understand the Fundamentals of Paints,  Understand the Fundamentals of Polymers.,  Understand the Polymerization techniques,  Understand the Fundamentals of Synthetic Film Formers., DETAILED CONTENTS, 1. BASICS OF PAINT:, (12 Periods), General Introduction of Paint Industry, definition of Paints, Varnishes and Lacquers, their, constituents and functions. General classification of surface coatings, mechanism of film, formation, sources and composition of oils, non–glyceride, components of oils, classification,, extraction and refining of oils., 2. FUNDAMENTAL OF POLYMERS:, (16 Periods), Introduction & historical background of polymers, macro-molecular concept, monomers &, polymers nomenclature of polymers, features ,characteristics and applications of a polymer,, definition of polymerization, rate of polymerization, average degree of polymerization,, functionality and polymerization. oligomers and high polymers, scope of elastomeric, fiber, forming and plastic materials., 3. CLASSIFICATION OF POLYMERIZATION:, (14 Periods), Types of polymerization, addition (chain) polymerization, condensation polymerization,, Comparison between addition and condensation polymerization. Bulk, suspension, solution &, emulsion polymerization., 4. FUNDAMENTAL OF SYNTHETIC FILM FORMERS:, (14 Periods), Fundamental of film formers, chemical structure of monomers, functionality and its, determination, polymerization and molecular weight, convertible, non- convertible film, formers, linear, branched and cross-linked film formers and co polymers., LIST OF PRACTICALS, 1. Preparation of Acrylic Emulsions., 2. Preparation of Polystyrene by bulk polymerization., 3. Preparation of Polyacrylate by solution/ polymerization, 4. To synthesize alkyd resins and test acid value and drying value, 5. To synthesize urea formaldehyde resin and test the solubility., 6. To synthesize phenolic resin and test the solubility and softening point ., 7. To prepare medium oil alkyd resin and test the acid value, 8. To prepare oil and resins varnish., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 56

Page 62 :
INSTRUCTIONAL STRATEGY, As the subject involves synthesis of various resin used in paint industry. It can be made more, interacting by showing various paint samples (automotive, wall coatings, high duty coatings, etc. )so that students can appreciate different types of resin and their properties., RECOMMENDED BOOKS, 1 Basics of Paint Technology- Part- 1 By V.C.Maliha, Meenal. A.Sikchi, 2 Organic Coating Technology vol-1 By Henry Fleming, Payne Publisher John Wiley &, Sons., 3 Surface Coatings : Raw materials & their usage Volume-1 By OCCA-Australia, Publisher Champas & Hall, 4 Outlines of Paint Technology By W.M.Margans Publisher Edward Arnold., 5 Introduction To Paint Chemistry By G.P.A.Turner Publisher champan & Hall, 6 Polymer Science By V.R.Gowariker Publisher New Age International, , SUGGESTED DISTRIBUTION OF MARKS, Topic No. Time Allotted (Hrs) Marks Allotted (%), 1, 12, 20, 2, 16, 30, 3, 14, 25, 4, 14, 25, Total, 56, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 57

Page 63 :
2.5, , DRYING OILS , DRIERS , SOLVENTS & PAINT ADDITIVES, L T, 5 -, , P, 6, , RATIONALE, This Subject equips the students with the knowledge of the oils used in surface, Coating as film formers. It also gives the basic knowledge about dries , solvents and, additives., LEARNING OUTCOMES, After undergoing this subject, the students will be able to:,  Have understanding of the oils used in Paint.,  Understand about the of Solvents used in Paint.,  Understand about the driers and other additives., DETAILED CONTENTS, 1. INTRODUCTION TO DRYING AND NON DRYING OILS:, (18 Periods), Properties and uses of some commonly used drying, semi drying & non drying oils,, yellowing of oils, Chemical reactions of oils, like oxidation, hydrolysis, glyceralysis,, saponification etc, Evaluation & characterization of oils, modified oils like heat treated oils,, maleinised oils, co polymerized oils, dehydrated castor oils, isomerized oils, reconstituted oils, etc., 2. DRIERS:, (16 Periods), Definition of driers, types of driers like primary, secondary and auxiliary. Function of, metals as well as, acid part of driers, driers mechanisms, manufacture of driers, their evaluation, and recommendation for water based and solvent based coatings, combination and dosage of, driers, properties of different metal as well as organic radical of driers., 3. SOLVENTS:, (16 Periods), Types of volatile solvents, general properties of solvents like solvent power, toxicity, rate of evaporation, boiling point & aromatic content, etc classification like true solvents, latent, solvents and diluents, effect of solvent on film properties, classes of solvents with their sources,, properties, evaluation of solvents, solubility parameters., 4. PLASTICIZERS & ADDITIVES:, , (20 Periods), , Definition, importance, mechanism of plasticization, types of plasticizers with their properties,, evaluation of plasticizers. Function of additives, additives for solvent-thinned coating like, wetting, and dispersing agents, anti settling and bodying agents, anti skinning agents, anti, flooding agents etc, additives for latex paints like surface – active agents, antifoam agents,, emulsifier, thickening agents, preservatives & coalescing agents etc., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 58

Page 64 :
LIST OF PRACTICALS, 1. Physical testing of drying oils for Colour,Specific Gravity, Refractive Index, etc., 2. Physical testing of semidrying oils for Colour,Specific Gravity, Refractive Index, etc., 3. Physical testing of non-drying oils for Colour,Specific Gravity, Refractive Index, etc, 4. Physical testing of drying oils for colour,sp.gr, R.I, etc., 5. Physical testing of semidrying oils for colour, sp. gr., R.I. , etc., 6. Physical testing of non-drying oils for colour, sp. gr., R.I. , etc., 7. Determination of acid value of oils., 8. Determination of iodine value of oils., 9. Determination of saponification of oils., 10. Oil/fat splitting to recover fatty acids & glycerol, 11. Testing of volatile solvent for Distillation Range., 12. Determination of Flash & Fire Point of volatile solvent., INSTRUCTIONAL STRATEGY, Mechanical operations has significant importance in the area of chemical engineering., Adequate competency needs to be developed by giving sufficient practical knowledge to, mechanical operation (characterization of solid particles, size reduction, energy requirement, and mechanical separation). A field visit may be conducted to expose the working of various, conveyers and filtration equipment in industries., MEANS OF ASSESSMENT, 1. Assignments, 2. Class Tests, 3. Practical Work, 4. End Semester Exam, 5. Viva-Voce, RECOMMENDED BOOKS, 1 Basics of Paint Technology- Part- 1 By V.C.Maliha, Meenal. A.Sikchi, 2 Organic Coating Technology vol-1 By Henry Fleming, Payne Publisher John Wiley &, Sons., 3 Surface Coatings : Raw materials & their usage Volume-1 By OCCA-Australia, Publisher Champas & Hall, 4 Outlines of Paint Technology By W M Margans Publisher Edward Arnold., London, 5 The Chemistry of Organic film formers By D.H.Solomon , R.E.Kriegar, 6 Surface Coatings: Science & Technology By Swaraj Paul Publisher John wiley &, Sons., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 59

Page 65 :
SUGGESTED DISTRIBUTION OF MARKS, Topic, 1., 2., 3., 4, Total, , Time Allotted, (Periods), 18, 16, 16, 20, 70, , Marks Allotted, (%), 25, 22, 23, 30, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 60

Page 66 :
2.6 GENERAL WORKSHOP PRACTICE –II, (Common for Civil Engineering, Electrical Engineering and Chemical Engineering ), L T P, - - 8, RATIONALE, In order to have a balanced overall development of diploma engineers, it is necessary to, integrate theory with practice. General workshop practices are included in the curriculum in, order to provide hands-on experience about use of different tools and basic manufacturing, practices. This subject aims at developing general manual and machining skills in the students., In addition, the development of dignity of labour, safety at work place, team working and, development of right attitude are the other objectives., LEARNING OUTCOMES, After completing the course, the students will be able to:, , , , , , , , , , Identify tools and equipment used and their respective functions., Identify different types of materials and their basic properties., Use and take measurements with the help of basic measuring tools/equipment., Select proper tools for a particular operation., Select materials, tools, and sequence of operations to make a job as per given, specification/drawing., Prepare simple jobs independently and inspect the same., Follow safety procedures and precautionary measures., Use safety equipment and Personal Protection Equipment., DETAILED CONTENTS (PRACTICAL EXERCISES), , Note:, , The students are supposed to come in proper workshop dress prescribed by the, institute. Wearing shoes in the workshop(s) is compulsory. Importance of safety and, cleanliness, safety measures and upkeep of tools, equipment and environment in each, of the following shops should be explained and practiced. The students should prepare, sketches of various tools/jobs in their practical Notebook., , The following shops are included in the syllabus:, 1, 2, 3, 4, , Fitting Shop, Sheet Metal Shop, Mason Shop, Machine Shop, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 61

Page 67 :
1., , FITTING SHOP, , 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, , Use of personal protective equipment and safety precautions while working., Basic deburring processes., Introduction to fitting shop tools, marking and measuring devices/equipment., Identification of materials. (Iron, Copper, Stainless Steel, Aluminium etc.), Identification of various steel sections (flat, angle, channel, bar etc.)., Introduction to various fitting shop operations/processes (Hacksawing, Drilling,, Chipping and Filing)., Job Practice, Job I Marking of job, use of marking tools, filing and use of measuring, instruments. (Vernier caliper, Micrometer and Vernier height gauge)., Job II Filing a rectangular/square piece to maintain dimensions within an, accuracy of  .25 mm., Job III Making a cut-out from a square piece of MS flat using hand hacksaw, and chipping, Job IV Drilling and tapping practice on MS Flat., , 2. SHEET METAL SHOP, 2.1., 2.2, 2.3, 2.4, , 2.5, 2.6, , 3, , Introduction to sheet metal shop, use of hand tools and accessories e.g. different, types of hammers, hard and soft mallet, sheet and wire gauge, necessary allowance, required during job fabrication, selection of material., Introduction and demonstration of hand tools used in sheet metal shop., Introduction and demonstration of various machines and equipment used in sheet, metal shop e.g. Shearing Machine, Bar Folder, Burring Machine,, Introduction and demonstration of various raw materials used in sheet metal shop, e.g. black-plain sheet, galvanized-iron plain sheet, galvanised corrugated sheet,, aluminium sheet etc., Study of various types of nuts, bolts, rivets, screws etc., Job Practice, Job I: Shearing practice on a sheet using hand shears., Job II: Practice on making Single riveted lap joint/Double riveted lap Joint., Job III :Practice on making Single cover plate chain type, zig-zag type and, single rivetted Butt Joint., MASON SHOP, 3.1. Introduction and importance of Mason shop, 3.2. Introduction of tools, equipment and machines used in Mason shop, 3.3., , Job Practice, Job I : Preparation of simple bond, Job II : Preparation of Arched bond, Job III: Preparation of RCC structure (column and beam), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 62

Page 68 :
4, , MACHINE SHOP, 4.1, 4.2, 4.3, 4.4, , Study and sketch of lathe machine, Study and Sketch of grinders, milling machine, drilling machine and CNC, machine., Plain and step turning and knurling practice., Study and sketch of planning/shaping machine and to plane a rectangle of cast, iron., , MEANS OF ASSESSMENT, , , , Workshop jobs, Report writing, presentation and viva voce, , RECOMMENDED BOOKS, 1., , Workshop Technology I,II,III, by SK Hajra, Choudhary and AK Choudhary; Media, Promoters and Publishers Pvt. Ltd. Mumbai., 2., Workshop Technology Vol. I, II, III by Manchanda; India Publishing House, Jalandhar., 3., Workshop Training Manual Vol. I, II by S.S. Ubhi; Katson Publishers, Ludhiana., 4., Manual on Workshop Practice by K Venkata Reddy; MacMillan India Ltd., New Delhi, 5., Basic Workshop Practice Manual by T Jeyapoovan; Vikas Publishing House (P) Ltd.,, New Delhi, 6., Workshop Technology by B.S. Raghuwanshi; Dhanpat Rai and Co., New Delhi, Workshop Technology by HS Bawa; Tata McGraw Hill Publishers, New Delhi., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 63

Page 69 :
3.1 ENVIRONMENTAL STUDIES, , L T P, 3 - 2, RATIONALE, A diploma holder must have knowledge of different types of pollution caused due to industries, and constructional activities so that he may help in balancing the ecosystem and controlling, pollution by various control measures. He should also be aware of environmental laws related, to the control of pollution. He should know how to manage the waste. Energy conservation is, the need of hour. He should know the concept of energy management and its conservation., LEARNING OUTCOMES, After undergoing the subject, the student will be able to:, , , , , , , , , , , , 1., , Comprehend the importance of ecosystem and sustainable, Demonstrate interdisciplinary nature of environmental issues, Identify different types of environmental pollution and control measures., Take corrective measures for the abatement of pollution., Explain environmental legislation acts., Define energy management, energy conservation and energy efficiency, Demonstrate positive attitude towards judicious use of energy and environmental, protection, Practice energy efficient techniques in day-to-day life and industrial processes., Adopt cleaner productive technologies, Identify the role of non-conventional energy resources in environmental protection., Analyze the impact of human activities on the environment, DETAILED CONTENTS, Introduction, (04 Periods), 1.1 Basics of ecology, eco system- concept, and sustainable development, Resources, renewable and non renewable., , 2., , Air Pollution, (04 Periods), 2.1 Source of air pollution. Effect of air pollution on human health, economy, plant,, animals. Air pollution control methods., , 3., , Water Pollution, (08 Periods), 3.1 Impurities in water, Cause of water pollution, Source of water pollution. Effect of, water pollution on human health, Concept of dissolved O 2, BOD, COD. Prevention, of water pollution- Water treatment processes, Sewage treatment. Water quality, standard., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 64

Page 70 :
4., , Soil Pollution, 4.1, 4.2, 4.3, 4.4, , (06 Periods), , Sources of soil pollution, Types of Solid waste- House hold, Hospital, From Agriculture, Biomedical,, Animal and human, excreta, sediments and E-waste, Effect of Solid waste, Disposal of Solid Waste- Solid Waste Management, , 5., , Noise pollution, (06 Periods), Source of noise pollution, Unit of noise, Effect of noise pollution, Acceptable noise level,, Different method of minimize noise pollution., , 6., , Environmental Legislation, (08 Periods), Introduction to Water (Prevention and Control of Pollution) Act 1974, Introduction to, Air (Prevention and Control of Pollution) Act 1981 and Environmental Protection Act, 1986, Role and Function of State Pollution Control Board and National Green Tribunal, (NGT), Environmental Impact Assessment (EIA)., , 7., , Impact of Energy Usage on Environment, (06 Periods), Global Warming, Green House Effect, Depletion of Ozone Layer, Acid Rain. Ecofriendly Material, Recycling of Material, Concept of Green Buildings., , LIST OF PRACTICALS, 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., , Determination of pH of drinking water, Determination of TDS in drinking water, Determination of TSS in drinking water, Determination of hardness in drinking water, Determination of oil & grease in drinking water, Determination of alkalinity in drinking water, Determination of acidity in drinking water, Determination of organic/inorganic solid in drinking water, Determination of pH of soil, Determination of N&P (Nitrogen & Phosphorus) of soil, To measure the noise level in classroom and industry., To segregate the various types of solid waste in a locality., To study the waste management plan of different solid waste, To study the effect of melting of floating ice in water due to global warming, , INSTRUCTIONAL STRATEGY, In addition to theoretical instructions, different activities pertaining to Environmental Studies, like expert lectures, seminars, visits to green house, effluent treatment plant of any industry,, rain water harvesting plant etc. may also be organized., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 65

Page 71 :
MEANS OF ASSESSMENT, , , , Assignments and quiz/class tests,, Mid-term and end-term written tests, , RECOMMENDED B OOKS, 1., 2., 3., 4., 5., 6., 7., 8., , Environmental and Pollution Awareness by Sharma BR; Satya Prakashan, New Delhi., Environmental Protection Law and Policy in India by Thakur Kailash; Deep and Deep, Publications, New Delhi., Environmental Pollution by Dr. RK Khitoliya; S Chand Publishing, New Delhi, Environmental Science by Deswal and Deswal; Dhanpat Rai and Co. (P) Ltd. Delhi., Engineering Chemistry by Jain and Jain; Dhanpat Rai and Co. (P) Ltd. Delhi., Environmental Studies by Erach Bharucha; University Press (India) Private Ltd.,, Hyderabad., Environmental Engineering and Management by Suresh K Dhamija; S K Kataria and, Sons, New Delhi., E-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , Websites for Reference:, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, 6, 7, Total, , Time Allotted, (Periods), 04, 04, 08, 06, 06, 08, 06, 42, , Marks Allotted, (%), 10, 10, 20, 14, 14, 20, 12, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 66

Page 72 :
3.2, , APPLIED MATHEMATICS –III, L T, 5 -, , P, -, , RATIONALE, Contents of this course provide understanding of some elementary and advanced mathematics, algorithms and their applications of solving engineering problems. Content of this course will, enable students to use some advanced techniques like Beta-Gamma function, Fourier series,, Laplace transform and probability distributions in solving complex engineering problems., LEARNING OUTCOMES, After undergoing this course, the students will be able to:, , , , , , , , , , Understand matrix operations and uses of matrix in different problems., Apply elementary row and column operations in finding inverse of a matrix., Find Eigen values, Eigen vectors of a matrix and their different properties., Understand degree/order of differential equations and their solution techniques., Use differential equations in engineering problems of different areas., Find Fourier series expansion of a function, Apply Laplace transform and their applications in solving engineering problems., Understand concept of probability distribution and their applications., DETAILED CONTENTS, , 1. Matrices, , (16 Periods), , 1.1, , Algebra of Matrices, Inverse, Addition, Multiplication of matrices, Null matrix and a unit matrix, Square matrix,, Symmetric, Skew symmetric, Hermitian, Skew hermition, Orthagonal, Unitary,, diagonal and Triangular matrix, Determinant of a matrix., Definition and Computation of inverse of a matrix., , 1.2, , Elementry Row/Column Transformation, Meaning and use in computing inverse and rank of a matrix., , 1.3, , Linear Dependence, Rank of a Matrix, Linear dependence/independence of vectors, Definition and computation of rank, of matrix. Computing rank through determinants, Elementary row transformation, and through the concept of a set of independent vectors, Consistency of equations., Eigen Pairs, Cayley-Hamilton Theorem, , 1.4, , Definition and evaluation of eign values and eign vectors of a matrix of order two, and three, Cayley-Hamilton theorem (without Proof)and its verification, Use in, finding inverse and powers of a matrix., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 67

Page 73 :
2., , Differential Calculus, 2.1, 2.2, , 2.3, , 3., , 3.2, , 3.3, 3.4, , 4., , 4.2, 4.3, , (15 Periods), , Formation, Order, Degree, Types, Solution, Formation of differential equations through physical,, geometrical,, mechanical and electrical considerations, Order, Degree of a differential equation,, Linear, nonlinear equation., First Order Equations, Variable seperable, equations reducible to seperable forms, Homogeneous, equtions, equations reducible to homogeneous forms, Linear and Bernoulli, form exact equation and their solutions., Higher Order Linear Equation :, Property of solution, Linear differential equation with constant coefficients, (PI for X= 𝑒ax, Sinax, Cosax, Xn, 𝑒axV, XV, Simple Applications, LCR circuit, Motion under gravity, Newton's law of cooling,, radioactive, decay, Population growth, Force vibration of a mass point attached to spring, with and without damping, effect. Equivalence of electrical and mechanical, system, , Integral Calculus-II, 4.1, , 5., , Function of two variables, identification of surfaces in space, conicoids, Partial Differentiation, Directional derivative, Gradient, Use of gradient f, Partial derivatives, Chain, rule, Higher order derivatives, Euler’s theorem for homogeneous functions,, Jacobians., Vector Calculus, Vector function, Introduction todouble and triple integral,differentiation and, integration of vector functions, gradient, divergence and curl, differential, derivatives., , Differential Equation, 3.1, , (15 Periods), , (12 Periods), , Beta and Gamma Functions, Definition, Use, Relation between the two, their use in evaluating integrals., Fourier Series, Fourier series of f(x),-n<x<n, Odd and even function,Half range series., Laplace Transform, Definition, Basic theorem and properties, Unit step and Periodic, functions, inverse laplace transform, Solution of ordinary differential, equations, , Probability and Statistics, , (12 Periods), , 5.1, , Probability, Introduction, Addition and Multiplication theorem and simple problem., , 5.2, , Distribution, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 68

Page 74 :
Discrete and continuous distribution, Bionimal Distribution, Poisson, distribution, Normal Distribution., INSTRUCTONAL STRATEGY, The content of this course is to be taught on conceptual basis with plenty of real world, examples. The basic elements of Laplace transform, Differential equations and Applications, of differential equations can be taught with engineering applications of relevant branch., MEANS OF ASSESSMENT, , , , , Assignments and Quiz/Class Tests, Mid-term and End-term Written Tests, Model/Prototype Making, , RECOMMENDED BOOKS, 1., 2., 3, 4., 5., , Elementary Engineering Mathematics by BS Grewal, Khanna Publishers, New Delhi, Engineering Mathematics, Vol I & II by SS Sastry, Prentice Hall of India Pvt. Ltd.,, Applied Mathematics-III by Chauhan and Chauhan, Krishna Publications, Meerut., Applied Mathematics-II by Kailash Sinha and Varun Kumar; Aarti Publication,, Meerut., E-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., SUGGESTED DISTRIBUTION OF MARKS, Topic, Time Allotted, Marks Allotted, (Periods), (%), 1., , 16, , 24, , 2., , 15, , 20, , 3., , 15, , 20, , 4, , 12, , 18, , 5, , 12, , 18, , Total, , 70, , 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 69

Page 75 :
3.3 FLUID MECHANICS & SOLID HANDLING, L T P, 5 - 4, RATIONALE, The subject will enhance the knowledge of students about fluids and their properties like shear,, laminar, turbulent, continuity equation, friction losses and other properties of, incompressible fluids. Time of emptying a tank, transportation of fluids and measurement of, flowing liquids. Solid handling is the fundamental of different machine and equipment’s used, in the chemical industries such as grinding, crushing, ball mills etc. chain belts and screw, conveyor, filtration & mixing equipment’s. Theoretical and experimental work will inculcate, their interest in learning and teaching among the students and teachers., LEARNING OUTCOMES, After studying this subject, the students will be able to:, 1., Understand Fluid properties and their flow behavior., 2., Understand Fluid Transportation Techniques and flow measurement., 3., Understand Size Reduction principle and related machinery., 4., Understand Working of Mixing Equipment’s and conveyors., , DETAILED CONTENTS, PART - A, 1. FLUIDS, , (06 Periods), , (i) Properties, (ii) Classification of Fluids., (iii)Fluid manometers, description and simple numerical problems., 2. FLOW OF INCOMPRESSIBLE FLUIDS:, , (08 Periods), , (i) Shear stress distribution in a cylindrical tube, velocity distribution for Newtonion, fluid., (ii) Reynold No.Elementry knowledge of laminar and turbulent flow, Reynold experiment., (iii) Continuity equations, Bernaulli's theorem, fluid heads and power requirement, calculation., (iv) Friction factor, Fanning equation and Hagen Poiseuille equation friction losses in, pipes, calculation of friction loss due to enlargement, contraction, fittings and valves., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 70

Page 76 :
(v) N.P.S.H., cavitation, pipes, tubing, fittings & (Valves numerical problems), 3. MEASUREMENT OF FLOWING FLUIDS:, , (08 Periods), , Orifice meter, venturimeter, pitot tube, rotameter, weirs and notches (Their construction, and derivation of formulae simple numerical problems, Definition:-Cofficient of, contraction, Coefficient of velocity, coefficient of discharge (Simple numerical problems)., 4. TRANSPORTATION OF FLUIDS:, , (08 Periods), , Classification of pumps, construction and operation of Air lift, reciprocating, rotary,, centrifugal and gear pumps., PART - B, 1. INTRODUCTION:, , (04 Periods), , Concept and role of unit operation in Industries., 2. CHARACTERISATION OF SOLID PARTICLES:, , (08 Periods), , Characterisation of solid particles, screening equipments, standard screens, screen, analysis, Grizzles, trommels., 3. SIZE REDUCTION:, , (10 Periods), , Theory of crushing, Rittinger's law, Kick's law, Bond’s Law Crushing and grinding, machinery; their classification, general description of jaw crusher, gyratory crusher, rol, crusher, hammer mills, ball mills, open circuit and closed circuit Systems., 4. HANDLING OF SOLIDS:, , (06 Periods), , Conveying equipment, their classification general construction and industrial, application, Belt conveyors, chain conveyors and screw conveyors., 5. MECHANICAL SEPARATIONS:, , (06 Periods), , (i) Types of filtration equipment, their application and operation, sand filters, filter press,, leaf filters, rotary filters, filter aids. Centrifugal filtration., (ii) Classifiers., (iii)Thickener, (iv) Cyclones., 6. MIXING EQUIPMENTS:, , (06 Periods), , Mixing equipment’s used for liquid-liquid, liquid-solid and liquid-gas system., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 71

Page 77 :
APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 72

Page 78 :
LIST OF PRACTICALS, FLUID MECHANICS & SOLID HANDLING LAB, 1. To determine the co-efficient of discharge of orifice-meter., 2. To determine the co-efficient of discharge of venturimeter., 3. To determine the co-efficient of discharge of V-Notches., 4. To determine the co-efficient of discharge of Rectangular Notches., 5. To determine coefficient of velocity (Cv), coefficient of discharge (Cd),coefficient of, contraction (Cc) and verify the relation between them., 6. To determine friction losses in pipes and fittings., 7. To verify loss of head due to, (a) Sudden Enlargement., (b) Sudden Contraction., 8. To verify Bernoulli's Theorem ., 9. To perform Reynold's experiments., 10. To determine the efficiency of a centrifugal pump., 11. Study the following., (a) Reciprocating Pump., (b) Pressure Gauge/Water Meter/Mechanical Flow Meter/Pitot Tube., 12. To study and draw a sketch of Chemical Engineering lab., 13. To analyse the given sample on a set of screens and report the analysis., 14. To determine the critical speed of a ball mill., 15. To determine the efficiency of disintegrator., 16. To determine filteration constant by a plate and frame filter press., 17. To determine the rate of settling of slurries of various concentration draw a height VS, time curve., 18. To determine the efficiency of Jaw crusher., 19. To study and sketch of a Rotary filter., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 73

Page 79 :
INSTRUCTIONAL STRATEGY, Teacher should give small assignments to the student. Give industrial based practical, problems for material and energy calculations., MEANS OF ASSESSMENT,  Assignments and quiz/class tests,  Mid-term and end-term written tests, RECOMMENDED BOOKS, 1. Unit Operations of Chemical Engineering by McCabe, Smith; McGraw Hill, 2. Introduction to Chemical Engineering by Badger & Banchero; McGraw Hill, 3. Chemical Engineering Volume-1 by Richardson & Coulson; Pergamon Press, 4. Mechanical Operations by Swain Palra, G.K. Roy, Tata McGraw Hill Publication, 5. Mechanical Operations by Kiran D. Patil, Nirali Publication, 6. Chemical Engineering, Vol. I and II by Coulson and Richardson, Pergamon Press, Publication, 7. Unit Operation of Chemical Engineering by McCabe and Smith; McGraw Hill, Publication, 8. Introduction to Chemical Technology by Badger and Banchero, McGraw Hill, Publication, Websites for Reference:, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, Topic No. Time Allotted Marks Allotted, (Periods), (%), 1, 06, 10, 2, 08, 14, 3, 08, 14, 4, 08, 12, 5, 04, 04, 6, 08, 08, 7, 10, 12, 8, 06, 08, 9, 06, 08, 10, 06, 10, Total, 70, 100, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 74

Page 80 :
3.4, , MATERIAL AND ENERGY BALANCE, L T P, 6 - -, , RATIONALE, This subject equips the students with basic chemical engineering calculations. It is one of the, core subjects. In this subject, students learn the fundamental concepts on which chemical, engineering design is based. This subject helps the student to prepare the material and enthalpy, balance of a process. It also helps them to calculate the quantity of material input and output, of a process plant., LEARNING OUTCOMES, After studying this course, the students will be able to:, , , , , , , , , , , Have understanding of scope of material and balance in chemical industries., Carry out conversions of units and equations., Have knowledge of the solution concentrations, specific gravity, density, molarity,, normality, molality in the chemical industries., Find the contents and properties of given analyzed gas., Find out quantity of material input and outputs of various unit operations., Calculate material input and outputs of chemical reactions to identify excess and, limiting reactants., Calculate the enthalpy associated with a reaction., Calculate the quantities of utility required., Carry out combustion calculations, proximate analysis and ultimate analysis, DETAILED CONTENTS, , 1. Scope, Scope of material and energy balance in chemical industries., , (04 Periods), , 2. Unit conversion, (08 Periods), Unit conversion of units, conversions of equations, S.I. system, M.K.S. system,,, C.G.S. system., 3. Gases and Gas Mixture, , (12 Periods), , 3.1 Ideal gas law, Boyle’s law, Charle’s law, value of universal gas constant,, Amagats Law, partial pressure, 3.2 Vander Waal’s equation., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 75

Page 81 :
3.3 Average molecular weight, density and composition (by weight and by mole) of, gas mixture., 3.4 Transform of material from one measure of concentration to another, including, mass/volume, PPM, molality, normality and molarity., 4. Material Balance without Chemical Reaction, , (15 Periods), , 4.1 Steps for solving material balance problems., 4.2 Solving problems on various unit operations like drying, evaporation, crystallization,, distillation, mixing, blending, absorption, extraction., 4.3 By pass, streams, recycle and purge simple problems., 5. Material Balance with Chemical reaction, , (15 Periods), , 5.1 Limiting component, excess component, percent conversion, percent yield,, percent excess, 5.2 By pass, recycle and purge stream related simple problems., 6. Energy Balance, , (15 Periods), , 6.1 Units of heat, sensible heat, latent heat calculations., 6.2 Heat of formation by Hess’s law, problems on the same., 6.3 Heat of reaction from specific heat data, heat of combustion, heat of formation, data problems., 6.4 Adiabatic reaction and adiabatic reaction temperature, 6.5 Net and gross heating value and its problems., 7. Combustion Process, (15 Periods), 7.1 Analysis of products of combustion: proximate and ultimate analysis., 7.2 Problems of fuel analysis, air fuel ratio, theoretical oxygen/air required., 7.3 Problems of fuel analysis, 7.4 Oxidation of sulphur and its compounds, INSTRUCTIONAL STRATEGY, Teacher should give small assignments to the student. Give industrial based practical, problems for material and energy calculations., MEANS OF ASSESSMENT,  Assignments and quiz/class tests,  Mid-term and end-term written tests, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 76

Page 82 :
RECOMMENDED BOOKS, 1., 2., 3., 4., , Stoichiometry by B. I. Bhatt & S. M. Vora; McGraw Hill Publication, Chemical Process Principles Part-1 by O.A. Hougen and K.M. Watson., Chemical Process Principles Part-1 by R.A. Rastogi, Solved Examples in Chemical Engineering by G.K. Ray, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., 6., 7., Total, , Time allotted, (Periods), 04, 08, 12, 15, 15, 15, 15, 84, , Marks Allotted, (%), 05, 10, 15, 20, 20, 15, 15, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 77

Page 83 :
3.5 PIGMENTS AND EXTENDERS, L T P, 6 - 2, RATIONALE, In this subject, the concept of colours is discussed Various types of Pigments and Extenders, are discussed in this paper which are responsible for colours and others properties in Paints, and Coatings., LEARNING OUTCOMES, After the completion of this course, the students will be able to:, , , Understand the color phenomena.,  Understand the Difference B/W Pigments & Dyes.,  Understand the Extenders and Pigments, and their manufacturing Processes.,  Learn about Inorganic and organic & Special effect Pigments., DETAILED CONTENTS, , 1. INTRODUCTION:, (16 Periods), Concept of color phenomena, classification of pigments, testing of pigments,oil absorption, value, bulking value, sp. Gravity, refractive index, mass tone, reducing power, tinting strength,, resistance to heat. Definition of pigment Dyes, dyes stuffs, toners and lake pigment etc., 2. INORGANIC PIGMENTS:, (20 Periods), (A)- White pigment such as titanium di-oxides, zinc oxide, Zinc Sulphate, Lithopone etc., (B)- Color pigments natural and synthetic iron oxide, lead chromate , silico chromates and, molybdates, chromegreen, chromium oxide, cadmium pigments, Prussian and ultramarine, blue,black, mercuric sulphide, synthetic inorganic complexes etc., (C)- Metallic pigments such as aluminium, Zinc, copper alloys, stainless steel etc., anti, corrosive pigments such red lead, silicon chromate, zinc and strontium chromate white, molybdates, calcium plumbate etc. Functional and miscellaneous pigments such as cuprous, and mercuric oxides, barium meta borate, nacreous luminescent, etc., 3. EXTENDERS:, (18 Periods), Sources, manufacture, properties and uses of extenders pigments such as carbonates, silicates,, sulphates, oxides, aluminates etc. Lead carbonate, sulphate, silicate etc, antimony oxides,, zirconium oxide and silicate, potassium titanate etc., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 78

Page 84 :
4. ORGANIC PIGMENTS:, (14 Periods), Natural organic pigments, comparison of organic pigments and inorganic pigments General, method of preparation and classification of synthetic organic pigment. Basic and acid dye, pigment., 5. MISCELLANEOUS PIGMENTS:, (16 Periods), Phthalocyanine blue and green, honsa yellows rubine, toners, para reds.toludine,, metallic, phosphorocent, flouroescent pearl pigments, treated pigments.Testing and, identification of organic pigments., INSTRUCTIONAL STRATEGY, Lot of emphasis on use of model as well as audio-video presentation should be given. Lot of, stress should be given to numerical aspect to give in-depth knowledge of the subject. This, will make the subject interesting and improve students’ involvement in the subject., LIST OF PRACTICALS, 1. Testing of pigments and extenders such as oil absorption value, bulk-ins value, tinting, strength, reducing power, mass tone, etc., 2. To check colors of oils, 3. To determine specific gravity of oils (drying, semidrying and non-drying)., 4. To check the form and condition of pigment., 5. To determine the moisture content of pigment., 6. To determine the viscosity of paint/primer by FORD cup no 04., 7. To check the flash and fire point of solvent., MEANS OF ASSESSMENT, -, , Assignments and quiz/class tests, , -, , Mid-term and end-term written tests, , LIST OF RECOMMENDED BOOKS, 1. Organic Coating Technology vol-2 By Henry Fleming, Payne Publisher John Wiley &, Sons., 2. Surface Coatings : Raw materials & their usage Volume-1 By OCCA-Australia, Publisher Champas & Hall, 3. Outlines of Paint Technology By W M Morgans Publisher Edward Arnold., 4. Pigment Handbook vol-1 By T.C.Patton, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 79

Page 85 :
5. Surface Coatings: Science & Technology By Swaraj Paul Publisher John wiley &, Sons., , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., Total, , Time allotted, (Periods), 16, 20, 18, 14, 16, 84, , Marks Allotted, (%), 20, 25, 20, 15, 20, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 80

Page 86 :
3.6, , RESINS & PAINT MEDIA, L T P, 4 - 4, , RATIONALE, In This subject, Various Types of Resins are discussed which are used as Film former or, binder in the Paints & Coating Synthetic Resins for different application area are discussed, along with properties and manufacturing of each., LEARNING OUTCOMES, After studying this course, the students will be able to:,  Understand about Natural and Synthetic Resins,  Understand the Manufacturing Process of Resins,  Understand the Structure-Property Relationship of each Resin., , DETAILED CONTENTS, 1.INTRODUCTION TO NATURAL RESINS :, , (08 Periods), , Classification and properties of natural resins etc, Resins sources, oleoresin and its, composition, properties and deficiencies of rosin film, modification of rosin, calcium rosinate, and maleoprimaric acid from rosin etc, Identification of rosin., Shellac: orgin, extraction of lac, different kinds of lac and their properties, composition of lac,, chemical modification of shellac for use in coatings , French polish, leather finishes,, Oleoresinous varnishes etc, from shellac., Cellulose source, properties, modification of cellulose for use in surface coatings like cellulose, esters, ethers. Bitumen, pitches, gums and glues, natural bitumens like gilosonite and petroleum, pitches general properties and uses of gums and glues., 2. ALKYD RESIN AND PHENOLIC RESINS:, (12 Periods), Alkyd resin, raw material, chemistry and formulation of various alkyds, manufacturing, process classification, properties and application of various types alkyds, water soluble alkyds,, polyester Saturated & Unsaturated resins,, Phenolic resins, classification, types of phenols used, reaction of phenol and formaldehyde,, novolac and resoles, resin production, properties and application of various phenolics, water, souble phenolics., 3., , AMINO RESINS AND EPOXY RESINS:, (12 Periods), Amino resin: urea formaldehyde and melamine formaldehyde resins, formulation of, methylol products, alkylation and curing reaction, properties and application in surface, coatings & water soluble and other amino resins. epoxy resin manufacture, formulation of two, pack system like solvent based coatings solvent less, high solids coating, single pack epoxies, like epoxy ester, thermoplastic epoxy etc., polyamide resins, poly amines and acids used,, dimerised fatty acids, properties and application of various polyamides., 4., , POLYURETHANE AND SILICONE RESINS:, , (11 Periods), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 81

Page 87 :
Poly urethanes: various isocynates used, reaction of the isocynate group and their, hazards, classification of poly urethanes, properties and application of various single and two, pack systems; silicone resin; synthesis of silicone resin’s, structure and properties relationship,, properties and application of silicone resins., 5., , VINYL AND ACRYLIC RESINS:, , (13 Periods), , A. Vinyl and acrylic : vinyl and acrylic monomers type of vinyl resin used in surface, coating . Vinyl co polymer and their properties, thermo plastic and thermo settling, acrylics, water soluble acrylics., B. Other Resins - Hydro carbon resin , coumarone and indene resins, resins from, petroleum products, terpene resins, miscellaneous resins : fluoro polymers, ketone, resins, poly carbonate etc., , LIST OF PRACTICALS, 1. Preparation and testing of rosin modification such as ester gum, maleic resins, etc., 2. Preparation and testing of synthetic resins such as alkyds, etc., 3. Preparation & testing of stand oils., 4. Preparation & testing of dehydrated castor oils (DCO)., INSTRUCTIONAL STRATEGY, Teacher should explain each process industry and use of each and every equipment used. An, industrial visit can be organized in various chemical and process industries. Audio-visuals, should be used to teach., , MEANS OF ASSESSMENT,  Assignments and quiz/class tests,  Mid-term and end-term written tests, LIST OF RECOMMENDED BOOKS, 1. Basics of Paint Technology- Part- 1 By V.C.Maliha, Meenal. A.Sikchi, 2. Organic Coating Technology vol-1 By Henry Fleming, Payne Publisher John Wiley &, Sons., 3. Surface Coatings : Raw materials & their usage Volume-1 By OCCA-Australia, Publisher Champas & Hall, 4. Outlines of Paint Technology By W.M.Morgans Publisher Edward Arnold., 5. The Chemistry of Organic film formers By D.H.Solomon , R.E.Kriegar, 6. A manual for Resin for surface coatings By P.K.Oldring Publisher SITA Technology, 7. Polymer Science By V.R.Gowariker Publisher New Age International, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 82

Page 88 :
APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 83

Page 89 :
SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., Total, , Time allotted, (Periods), 08, 12, 12, 11, 13, 56, , Marks Allotted, (%), 15, 20, 20, 20, 25, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 84

Page 90 :
3.7, , BASICS OF INFORMATION TECHNOLOGY, L T P, - - 6, , RATIONALE, Information technology has great influence on all aspects of life. Primary purpose of using, computer is to make the life easier. Almost all work places and living environment are being, computerized. The subject introduces the fundamentals of computer system for using various, hardware and software components. In order to prepare diploma holders to work in these, environments, it is essential that they are exposed to various aspects of information technology, such as understanding the concept of information technology and its scope; operating a, computer; use of various tools using MS Office/Open Office/Libre Office using internet etc.,, form the broad competency profile of diploma holders. This exposure will enable the students, to enter their professions with confidence, live in a harmonious way and contribute to the, productivity., Note:, Explanation of Introductory part should be demonstrated with practical work. Following, topics may be explained in the laboratory along with the practical exercises. There will, not be any theory examination., LEARNING OUTCOMES, After undergoing the subject, the students will be able to:, , , , , , , , , , , , , , Identify Computer Hardware Components, Network Components and Peripherals., Explain the role of an Operating System., Install System and Application Software., Explain the function of the system components including Processor, Motherboard and, Input-output devices., Use Word Processing Software to prepare document., Use Spreadsheet Software to create workbooks and automate calculation., Use Presentation Software to create interactive presentation., Perform fundamental tasks common to most application software including print,, scan, save, edit, cut, copy, paste, format, spell and grammar check., Find and evaluate information on the Web., Install Antivirus., Safeguard against Online Frauds, threats and crimes., Use online office tools(Google suits), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 85

Page 91 :
TOPICS TO BE EXPLAINED THROUGH DEMONSTRATION, 1., , Introduction to Computers and Peripherals., Components of Computer, Types of Computer, CPU, RAM, ROM, Hard disk, USB,, Flash drive, CD, DVD,Blue ray, Keyboard, Mouse, Monitor, LCD, Printer, Plotter,, Scanner, Modem, Sound Cards, Speakers, CMOS battery, Sharing of Printers., , 2., , Operation System and Application Software, System Software, Application Software, Virtualization Software, Utility Software, MS, Office/Open Office/Libreoffice, Working with window, Desktop components, Menu, bars, creating shortcut of program. Installation of Application softwares, Antivirus and, Drivers., , 3., , Word Processing, Spreadsheet and Presentation, Usage and creation of word document, spreadsheets and presentation, Google Suits, (Google drive, google sheet, google doc. Google presentation), , ., 4., , Internet, Basics of Networking – LAN, WAN, Wi-Fi technologies, Concept of IP Addrsses,, DNS, Search Engines, e-mail, Browsing and cyber laws., , LIST OF PRACTICAL EXERCISES, 1., 2., 3., 4., 5., 6., 7., 8., , Identify various components, peripherals of computer and list their functions., Installation of various application software and peripheral drivers, Installation of operating system (windows/linux/others), Creation and Management (Rename, delete, search of file and folders), Installation of Antivirus and remove viruses, Scanning and printing documents, Browsing, Downloading, Information using Internet, E-Mail ID creation, comparing, sending and receiving e-mail. Attaching a file with email message., 9. Word Processing (MS Office/Open Office), a), File Management,  Opening, creating and saving a document, locating files, copying contents in, some different file(s), protecting files, giving password protection for a file, b), Page set up,  Setting margins, tab setting, ruler, indenting, c), Editing a document,  Entering text, cut, copy, paste using tool- bars, d) Formatting a document, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 86

Page 92 :
 Using different fonts, changing font size and colour, changing the appearance, through bold/italic/underlined, highlighting a text, changing case, using, subscript and superscript, using different underline methods,  Aligning of text in a document, justification of document, inserting bullets and, numbering,  Formatting paragraph, inserting page breaks and column breaks, line spacing,  Use of headers, footers: Inserting footnote, end note, use of comments, autotext,  Inserting date, time, special symbols, importing graphic images, drawing tools, e) Tables and Borders,  Creating a table, formatting cells, use of different border styles, shading in, tables, merging of cells, partition of cells, inserting and deleting a row in a table,  Print preview, zoom, page set up, printing options,  Using find, replace options, f) Using Tools like,  Spell checker, help, use of macros, mail merge, thesaurus word content and, statistics, printing envelops and lables,  Using shapes and drawing toolbar,,  Working with more than one window ., 10., , Spread Sheet Processing (MS Office/Open Office/Libre Office), a), , 11., , Starting excel, open worksheet, enter, edit, data, formulae to calculate values,, format data, save worksheet, switching between different spread sheets, b), Menu commands:, Create, format charts, organise, manage data, solving problem by analyzing data., Programming with Excel Work Sheet, getting information while working, c), Work books:, Managing workbooks (create, open, close, save), working in work books, selecting, the cells, choosing commands, data entry techniques, formula creation and links,, controlling calculations, Editing a worksheet, copying, moving cells, pasting, inserting, deletion cells, rows,, columns, find and replace text, numbers of cells, formatting worksheet, conditional, formatting, d), Creating a chart:, Working with chart types, changing data in chart, formatting a chart, use chart to, analyze data, Using a list to organize data, sorting and filtering data in list, e), Retrieve data with query:, Create a pivot table, customizing a pivot table. Statistical analysis of data, f), Exchange data with other application:, Embedding objects, linking to other applications, import, export document., PowerPoint Presentation (MS Office/Open Office/Libre office), a), , Introduction to PowerPoint, How to start PowerPoint, Working environment: concept of toolbars, slide layout &, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 87

Page 93 :
templates., Opening a new/existing presentation, Different views for viewing slides in a presentation: normal, slide, sorter., b) Addition, deletion and saving of slides, c) Insertion of multimedia elements, Adding text boxes, Adding/importing pictures, Adding movies and sound, Adding tables and charts etc., Adding organizational chart, Editing objects, Working with Clip Art, d) Formatting slides, Using slide master, Text formatting, Changing slide layout, Changing slide colour scheme, Changing background, Applying design template, -, , 12., , Google Suits, Using Google drive, Google shut, Google docs, Google slides., , INSTRUCTIONAL STRATEGY, Since this subject is practice oriented, the teacher should demonstrate the capabilities of, computers to students while doing practical exercises. The students should be made familiar, with computer parts, peripherals, connections and proficient in making use of MS Office/Open, Office/Libre office/Google Suit in addition to working on internet. The student should be, made capable of working on computers independently., MEANS OF ASSESSMENT, -, , Class Tests/Quiz, Software Installation and Use, Viva-Voce, Presentation, , RECOMMENDED BOOKS, 1., 2., 3., , Fundamentals of Computer by V Rajaraman; Prentice Hall of India Pvt. Ltd., New, Delhi, Information Technology for Management by Henery Lucas, Tata McGraw Hills, New, Delhi, Computers Fundamentals Architecture and Organisation by B Ram, revised Edition,, New Age International Publishers, New Delhi, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 88

Page 94 :
4., 5., 6., 7., 8., 9., 10., , Computers Today by SK Basandara, Galgotia publication Pvt Ltd. Daryaganj, New, Delhi., Internet for Every One by Alexis Leon and Mathews Leon; Vikas Publishing House, Pvt. Ltd., Jungpura, New Delhi, A First Course in Computer by Sanjay Saxena; Vikas Publishing House Pvt. Ltd.,, Jungpura, New Delhi, Computer Fundamentals by PK Sinha; BPB Publication, New Delhi, Fundamentals of Information Technology by Leon and Leon; Vikas Publishing House, Pvt. Ltd., Jungpura, New Delhi, On Your Marks - Net…Set…Go… Surviving in an e-world by Anushka Wirasinha,, Prentice Hall of India Pvt. Ltd., New Delhi, Fundamentals of Information Technology by Vipin Arora, Eagle Parkashan, Jalandhar, , Reference websites, 1., www. tutorialspoint..com, 2., www.sf.net, 3., Gsuite.google.com, 4., Spoken-tutorial.org, 5., Swayam.gov.in, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 89

Page 95 :
4.1, , COMMUNICATION SKILLS – II, L, 4, , T P, - 2, , RATIONALE, Knowledge of English Language plays an important role in career development. This subject, aims at introducing basic concepts of communication besides laying emphasis on developing, listening, speaking, reading and writing skills as parts of Communication Skill., LEARNING OUTCOMES, After undergoing the subject, the students will be able to:, , , , , , , , Frame correct sentences with illustrations, Comprehend the language correctly, Interpret the language correctly, Use given material in new situations., Correspond effectively using various types of writings like letters, memos etc., Communicate effectively in English with appropriate body language making use of, correct and appropriate vocabulary and grammar in an organised set up and social, context., DETAILED CONTENTS, , 1. Functional Grammar, 1.1, Prepositions, 1.2, Framing Questions, 1.3, Conjunctions, 1.4, Tenses, , (16 periods), , 2 Reading, , (16 periods), , 2.1, , 3, , Unseen Passage for Comprehension (Vocabulary enhancement - Prefixes,, Suffixes, one word substitution, Synonym and Antonym) based upon the, passage should be covered under this topic., , Writing Skill, 3.1., , 3.2., 3.3., 3.4., , (24 periods), , Correspondence, a), Business Letters- Floating Quotations, Placing Orders, Complaint, Letters., b), Official Letters- Letters to Government and other Offices, Memos, Circular, Office Orders, Agenda & Minutes of Meeting, Report Writing, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 90

Page 96 :
LIST OF PRACTICALS, Note: Teaching Learning Process should be focused on the use of the language in writing, reports and making presentations., Topics such as Effective listening, effective note taking, group discussions and regular, presentations by the students need to be taught in a project oriented manner where the, learning happens as a byproduct., Speaking and Listening Skills, 1. Debate, 2. Telephonic Conversation: general etiquette for making and receiving calls, 3. Offering- Responding to offers., 4. Requesting – Responding to requests, 5. Congratulating, 6. Exploring sympathy and condolences, 7. Asking Questions- Polite Responses, 8. Apologizing, forgiving, 9. Complaining, 10. Warning, 11. Asking and giving information, 12. Getting and giving permission, 13. Asking for and giving opinions, INSTRUCTIONAL STRATEGY, Students should be encouraged to participate in role play and other student-centered activities, in class rooms and actively participate in listening exercises, MEANS OF ASSESSMENT, -, , Assignments and quiz/class tests, mid-semester and end-semester written tests, Actual practical work, exercises and viva-voce, Presentation and viva-voce, , RECOMMENDED BOOKS, 1., 2, 3, 4., , Communicating Effectively in English, Book-I by RevathiSrinivas;, Abhishek, Publications, Chandigarh., Communication Techniques and Skills by R. K. Chadha; Dhanpat Rai Publications,, New Delhi., High School English Grammar and Composition by Wren & Martin; S. Chand &, Company Ltd., Delhi., e-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR,, Chandigarh., , Websites for Reference:, 1., http://www.mindtools.com/ page 8.html – 99k, 2., http://www.letstalk.com.in, 3., http://www.englishlearning.com, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 91

Page 97 :
4., 5., , http://learnenglish.britishcouncil.org/en/, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, Topic No., , Time Allotted, (Periods), , Marks Allotted, (%), , 1, 2, 3, Total, , 16, 16, 24, 56, , 28, 28, 44, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 92

Page 98 :
4.2, , HEAT TRANSFER OPERATIONS, L, 5, , T, -, , P, 4, , RATIONALE, Most of the Chemical Engineering operations will involve either heat addition or heat removal, in one way or the other. It is, therefore, extremely necessary to have good understanding about, the heat transfer mechanisms. This subject enables the students to apply this knowledge for, understanding the performances of various heat transfer equipment such as heat exchangers,, condensers, evaporators etc. used in almost all chemical and related industries, LEARNING OUTCOMES, After the completion of this course, the students will be able to:,  Understand basic laws of heat transfer,  Analyze problems involving steady heat conduction in simple geometries.,  Understand the concept of convective heat transfer and to analyze the problems, involving heat transfer coefficients for natural and forced convection,  Analyze heat exchanger performance using LMTD and use it for parallel or counter, flow,  Recognizer various type of heat exchanger working principle, and basic geometries of, heat exchanger.,  Determine the overall heat transfer coefficient for a heat exchanger.,  Understand the concept of boiling and condenser,  Analyze the performance of evaporator, DETAILED CONTENTS, 1., , Modes of Heat Transfer, , (2 Periods), , Conduction, Convection, Radiation, concept of steady state and unsteady state heat, transfer, 2., , Conduction, , (12 Periods), , Fourier’s law of heat conduction, thermal conductivity of materials – solids, liquids and, gases and effect of temperature on thermal conductivity, one dimensional steady state, heat conduction through a plane wall, composite wall and cylinder, multi-layer, cylinder. Steady state heat conduction through a variable area in solid cylinder and, sphere., Insulation and insulating materials, critical thickness of insulation, physical properties, of insulating materials, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 93

Page 99 :
3., , Convection, , (12 Periods), , Natural and forced convection, dimensional analysis and significance of various, dimensional groups such as Reynolds number, Prandtl number, Nusselt number,, Grasshof number., Stanton number. Peclet number, empirical correlations for free and, forced convection., Dittus Boelter’s equation, Sieder Tate Equation, simple numerical problems using, Dittus Boelter equation, Sieder Tate equation and convective heat coefficient., Convective heat transfer and concept of heat transfer coefficient, 4., , Radiation, , (10 Periods), , Reflection, absorption and transmission of thermal radiation, Emmisive power, Wein’s, displacement law, Stefan Boltzmann Law, Planck’s law, Kirchhoff’s law, Concept of, black body, Grey body. Heat transfer by radiation exchange of energy between two, parallel planes of different emissivity, view factor, radiation shield, solar radiation., 5, , Heat Exchanger, , (16 Periods), , Introduction, classification, individual and overall heat transfer coefficient, fouling, factor, roughness of surfaces and their effect, LMTD for parallel and counter current, heat exchangers, construction and description of:- Concentric double pipe, Shell and, tube (1-1 heat exchanger and 1-2 heat exchanger), Plate type heat exchanger, Efficiency, of extended surface equipment, compact heat exchanger, finned tube heat exchanger., 6., , Boiling and condensation, , ( 8 Periods), , Interface, bubble and film boiling, boiling regime, Concept of condensation, types of, condensation i.e. drop wise and film wise condensation, 7., , Evaporators, , (10 Periods), , Evaporation Capacity, Evaporation Economy, construction and description of open, pan, long type vertical evaporator, falling film evaporator and agitated thin film, evaporator, multiple effect evaporator, feeding arrangements- forward, backward,, mixed and parallel feed., , LIST OF PRACTICALS (at least 8 experiments to be performed), 1., 2., 3., 4., 5., 6., , To find the thermal conductivity of (material at different temperature) metal rod., To calculate the rate of heat loss through composite wall., To determine experimentally the k value of insulating powder., To calculate the heat transfer co-efficient for natural convection., To calculate the heat transfer co-efficient for forced convection., To determine overall heat transfer co-efficient for an open pan evaporator., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 94

Page 100 :
7. To study dropwise and filmwise condensation., 8. To study Stefan Boltzman law., 9. To determine the heat transfer coefficient with the help of double pipe heat exchanger, using parallel flow, 10. To determine the H.T coefficient with the help of double pipe heat exchanger using counter, flow, 11. To determine heat transfer coefficient in shell and tube heat exchanger using counter flow, 12. To determine heat transfer coefficient in shell and tube heat exchanger using parallel flow, 13. To determine the rate of evaporation in a jacketed bottle (open pan evaporation), 14. Experiment on a single effect evaporator and determination of steam economy, 15. To determine heat transfer rate in finned tube heat exchanger, INSTRUCTIONAL STRATEGY, A field visit may be conducted to expose the students to various types of heat transfer, equipment. Practical should be conducted to give an idea about modes of heat transfer, effect, of insulation on heat transfer., MEANS OF ASSESSMENT, -, , Assignments and quiz/class tests, mid-semester and end-semester written tests, Actual practical work, exercises and viva-voce, Presentation and viva-voce, , RECOMMENDED BOOKS, 1., 2., 3., 4., 5., 6., 7., 8., , Heat Transfer by Chapman, MacMillan Publication., Principles of Heat Transfer by Kreith, Harper and Row Publication., Process Heat Transfer by Kern, McGraw Hill Publication., Heat Transfer by McAdams, McGraw Hill Publication., Heat Transfer by KA Gavahane, Nirali Publications., Process Heat Transfer by Kern DQ, McGraw Hill Book, New York, Heat Transfer 7th Ed. By Holman JP; McGraw Hill, New York, Applied Process Design for Chemical and Petrochemical Plants, Volume III by Ludwig,, E; Gulf Publishing Co., Houston, Texas, 9. Heat Transfer Principles and Applications by K Dutta; Prentice Hall, India., 10. Unit Operation of Chemical Engineering by McCabe and Smith., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 95

Page 101 :
SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., 6., 7., Total, , Time Allotted, (Periods), 02, 12, 12, 10, 16, 08, 10, 70, , Marks Allotted, (%), 04, 16, 16, 15, 22, 12, 15, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 96

Page 102 :
4.3, , CHEMICAL REACTION ENGINEERING & THERMODYNAMICS, L T P, 5 - 4, , RATIONALE, This subject outline the basic principles of Kinetics. These principles which are useful in, developing new concept and operating the plant. It enables the students to have an idea about, the different types of rectors and it’s design also gives knowledge about the importance of, catalyst in various chemical processes in the industries., understanding basic concepts, thermodynamic properties of fluid and performance of thermal, systems used in industry., LEARNING OUTCOMES, After Studying this subject, the students will be able to:, , , , , , , , Know about rate of chemical reaction., Understand various types of reactors., Know the fundamentals of reactor design., Know about basic concepts of thermodynamics., Understands laws of thermodynamics., Understand the application of laws of thermodynamics., , DETAILED CONTENTS, Part-A, CHEMICAL REACTION ENGINEERING, 1. Introduction to Chemical Kinetics, (10 Periods), 1.1, Concept of rate of reaction, rate equation, rate constant, order of reaction,, Molecularity of reaction., 7.2, Single reaction multiple reaction, non-elementary reaction., 7.3, Theories of reaction (Collision & Transition State Theory) rates constantArrhenius law and problems based on it., 7.4, Activation Energy., 7.5, Definition, Important Classification and desired properties of catalysts., 2. Interpretation of batch reactor data., 2.1, 2.2, , (10 Periods), , Concept of batch & semi Batch reactor., Integral and Differential method of analysis of batch reactor data., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 97

Page 103 :
2.3, , Half-life concept for the overall order of irreversible reactions and problem, based on that., , 3. Introduction to Reactor Design, 3.1., , 3.2., , (08 Periods), , Type of reactor (Batch reactor, Continuous reactor, Plug flow reactor, Mixed, flow reactor, Biological reactor, Fixed (packed) bed reactor, fluidized bed, reactor., Concept of space-time, space velocity and holding time., , PART-B, CHEMICAL ENGINEERING THERMODYNAMICS, 1. Introduction and Basic Concepts, (10 Periods), Systems, Scope & importance of Thermodynamics, surroundings & Processes open, closed, and isolated systems intensive and extensive properties, state and path functions/ Concept of, internal energy, enthalpy, entropy, free energy and equilibrium equation of state, ideal gas law,, Vander Waals equation. Amagat’s law, Dalton’s law, Henry’s law, Zeroth law of, thermodynamics., 2. First Law of Thermodynamics for Open and Closed System, (10 Periods), Statement of first law of thermodynamics, calculation of internal energy, enthalpy, heat and, work for ideal gas undergoing reversible, isothermal, Isobaric, adiabatic and polytrophic, process. T-V, P-V and P-T diagrams., 3. Second Law of Thermodynamics, (14 Periods), Statement of second law of thermodynamics: Kelvin Plank statement and Classius statement,, Carnot cycle and its efficiency, concept of entropy and entropy change for closed and open, system. Heat pump and heat engine (coefficient of performance and efficiency)., Applications of Second law of Thermodynamics, (08Periods), Refrigeration, The Carnot Refrigeration cycle, vapour compression and absorption, refrigeration cycle, air refrigeration cycle, coefficient of performance(COP), liquefaction, process, latest refrigerants - their qualities and applications, LIST OF PRACTICALS, 1. Study and operation of batch reactor, 2. Saponification reaction through batch reactor, 3. Study the kinetics of reaction for all the combination for given PFR and CSTR in series, 4. To find the Arrhenius equation from isothermal batch reactor., 5. To study the performance of a fluidized bed reactor, 6. Study the performance of mixed flow reactor, 7. Study the performance of plug flow reactor, 8. Find out rate constant and in a CSTR, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 98

Page 104 :
INSTRUCTIONAL STRATEGY, Stress should be given on interpretation and designing of the different reactors. Industrial visit, during the semester should be planned and audio-visual aids should be used for making student, understand. This will make subject interesting and improve student’s performance in the, subject., MEANS OF ASSESSMENT,  Assignments and quiz/class tests,  Mid semester and end semester written tests, RECOMMENDED BOOKS, 1., 2., 3., 4., 5., 6., 7., , Chemical Reaction Engineering by Octave Levenspiel; Wiley Eastern Ltd., Chemical Engineering Kinetics by J.M Smith; McGraw Hill Publication, Chemical Engineering Thermodynamics by J.M Smith, H.C. Vanness; McGraw Hill, Chemical Engineering Thermodynamics by K.V. Narayanan; Prentice Hall India., Chemical Engineering Thermodynamics by YVC Rao, Engineering Thermodynamics by PK Nag, Chemical Engineering Thermodynamics by K.A. Gavhane, Nirali Publication., , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., 6., 7., Total, , Time allotted, (Periods), 10, 10, 08, 10, 10, 14, 08, 70, , Marks Allotted, (%), 15, 15, 12, 15, 15, 18, 10, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 99

Page 105 :
4.4, , FORMULATION & MANUFACTURING OF PAINTS, L T P, 4 - 4, , RATIONALE, In this Subject there is discussion of Formulation of the Coating for different applications., Various parameters, and steps during formulation is discussed, there is also discussion on the, machinery for manufacturing of Coating and safety principles during the same., LEARNING OUTCOMES, After studying this course, the students will be able to:, , , , , Formulate a Coating for the Given Requirement., Choose the correct machinery for manufacturing., Make the safe environment during manufacturing., DETAILED CONTENTS, , 1. INTRODUCTION:, (10 Periods), Principles of paint formulation, formulation elements, mathematics & steps involved in, paint : Pigment Volume Concentration (PVC), Pigment to Binder ( P/B) ratio, etc,, Formulation of primers, under coats, base coats and finish coats for steel surfaces., 2. STEPS IN PAINT MANUFACTURING:, (10 Periods), Rheology and rheological considerations (Pseudoplasticity, dilatatncy and thixotropy)., Steps in paint manufacture- mixing, grinding, letdown, thinning, tinting (shade matching),, straining, phenomenon of wetting, grinding and dispersion, important considerations in, pigment dispersion, 3. MACHINERY USED IN PAINT MANUFACTURING:, (14 Periods), Heavy duty mixers; double blade mixers W& P blending, sigma kneaders pug mills,, change, edge runner roller mills , different variants, material balance, power inputs and mill, base composition for three roll mill, Ball, pebble and bead mills, cascading & factors affecting, effectiveness of milling, such as size & shape of grinding medium, mill base , attritors and, vibration mill, sand mill : type of grinding media, sand grinding process efficiency of mill,, horizontal sand mills like dyno mill , pearl mills etc, miscellaneous mills, high speed and, impingment mill, etc., 4. GENERAL HAZARDS:, (12 Periods), Let down vehicles and let down of non-aqueous and latex paints, fire and health, hazards, general industrial hazards, prime cause for fire and explosion electro-static charges, precautionary measures., 5. SAFETY MEASURES AND FACTORY LAYOUTS:, (10 Periods), Safety measure protection, factory layout principles and general considerations, typical, flow diagram, single & multi storied building, sections of paint factory and their location., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 100

Page 106 :
LIST OF PRACTICALS, 1. To check refractive index of oils (Drying, semidrying and non-drying), 2. To determine specific gravity of oils (Drying, semidrying and non-drying), 3. To check colour of oils (Drying, semidrying and non drying), 4. To determine acid value of oils, 5. To determine acid value of resins, 6. To test the flash point of solvents, 7. To test the aromatic content in the material, 8. Preparation of oleo-resionous varnishes, 9. Preparation of primers (solvent based and water based)., 10. Preparation of glossy paints, INSTRUCTIONAL STRATEGY, Teacher should explain each process industry and use of each and every equipment used., An industrial visit can be organized in various chemical and process industries., Audio-visuals should be used to teach., MEANS OF ASSESSMENT,  Assignments and quiz/class tests,  Mid-term and end-term written tests, RECOMMENDED BOOKS, , , , , , , , , Basics of Paint Technology- Part- 2 By V.C.Maliha, Meenal. A.Sikchi, Organic Coating Technology vol-2 By Henry Fleming, Payne Publisher John Wiley &, Sons., Surface Coatings : Raw materials & their usage Volume-2 By OCCA-Australia, Publisher Champas & Hall, Outlines of Paint Technology By W.M.Margans Publisher Edward Arnold., Surface Coatings: Science & Technology By Swaraj Paul Publisher John wiley &, Sons., Organic Coatings: Science & Technology By Z.W.WICKS, F.N.JONES,, S.P.PAPPAS Publisher Wiley & Sons, Paint Formulation : Principles and Practice By J Boxall & J.A.Fraunhofer, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 101

Page 107 :
SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., Total, , Time allotted, (Periods), 10, 10, 14, 12, 10, 56, , Marks Allotted, (%), 15, 25, 25, 20, 15, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 102

Page 108 :
4.5 BASICS OF ELECTRICAL AND ELECTRONICS ENGINEERING, L, 5, , T, -, , P, 4, , RATIONALE, The objective of the course is to impart basic knowledge and skills regarding basic electrical, engineering, which diploma holders will come across in their professional life. This course, will provide the students to understand the basic concepts and principles of d.c. and a.c., fundamentals, electromagnetic induction, batteries, transformers, motors distribution system,, domestic installation, electrical safety etc. The students will also learn basic electronics, including diodes and transistors and their applications., , LEARNING OUTCOME, , After undergoing the subject, the students will be able to, , , , , , Understand the meaning of basic electrical quantities such as voltage, current,, power etc., Use working principle of transformer., Use basic Network Theorem and Kirchoff’s laws., Understand the concept of Junction Diode, transistor and field effect transistor., , DETAILED CONTENTS, 1., , Application and Advantages of Electricity, , (03 periods), , Difference between ac and dc, various applications of electricity, advantages of, electrical energy over other types of energy, 2., , Basic Electrical Quantities, , (06 periods), , Definition of voltage, current, power and energy with their units, name of instruments, used for measuring above quantities, connection of these instruments in an electric, circuit, 3., , AC Fundamentals, , (08 periods), , Electromagnetic induction-Faraday’s Laws, Lenz’s Law; Fleming’s rules, Principles of, a.c. circuits; Alternating emf, Definition of cycle, frequency, amplitude and time period., Instantaneous, average, r.m.s and maximum value of sinusoidal wave; form factor and, Peak Factor. Concept of phase and phase difference. Concept of resistance, inductance, and capacitance in simple a.c. circuit. Power factor and improvement of power factor, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 103

Page 109 :
by use of capacitors. Concept of three phase system; star and delta connections; voltage, and current relationship (no derivation), 4., , Transformers, , (06 periods), , Working, principle and construction of single phase transformer, transformer ratio, emf, equation, losses and efficiency, cooling of transformers, isolation transformer, CVT,, auto transformer (brief idea), applications., 5., , D.C. Circuits, (10 periods), 5.1, Ohm/s law, resistivity, effect of temperature on resistance, heating effect of, electric current, conversion of mechanical units into electrical units., 5.2, Kirchoff’s laws, application of Kirchoff’s laws to solve, simple d.c. circuits, 5.3, Thevenin’s theorem, maximum power transfer theorem, Norton’s theorem and, superposition theorem, simple numerical problems., , 6., , Basic Electronics, 6.1, 6.2, 6.3, , (22 periods), , Basic idea of semiconductors – P and N type; diodes, Zener diodes and their, applications,, Introduction to BJT : NPN and PnP transistors, other symbols and mechanism, of current flow, explanation of fundamental current relations. Comparison of, CB, CE and CC configuration transistor as amplifier in CE configuration., Field Effect Transistor (FET) : Construction, Operation and Characteristics of, Junction FET, Comparison of SFET, MOSFET & CMOS., , LIST OF PRACTICALS, 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., , Identification of Resistor, Capacitor, Inductor, Transformer, LBD etc, Familiarization with multimeter/CPO etc., Measurement of wave shapes of half wave rectifier and full wave rectifier., Plot the P&T characteristics and determination of its parameter from this, characteristics., Connection and reading of an electric energy meter, Use of ammeter, voltmeter, wattmeter, and multi-meter, Study of different types of fuses, MCBs and ELCBs, Study of Zener diode as a constant voltage source and to draw its V-I characteristics, To draw V-I characteristics of PN junction diode, Verify Thevenin and Norton theorem, , INSTRUCTIONAL STRATEGY, The teacher should give emphasis on understanding of concept and various terms used in the, subject. Practical exercises will reinforce various concepts., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 104

Page 110 :
MEANS OF ASSESSMENT, , Class Test, , Home Assignment, , Attendance, , Sessional Test, RECOMMENDED BOOKS, 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., , Basic Electrical Engineering by PS Dhongal; Tata McGraw Hill Publishers, New Delhi, A Text Book of Electrical Technology, Vol. I and II by BL Thareja; S Chand and Co.,, New Delhi, Basic Electricity by BR Sharma; Satya Prakashan, New Delhi, Basic Electrical Engineering by JB Gupta, S Kataria and Sons, Delhi, Experiments in Basic Electrical Engineering by SK Bhattacharya and KM Rastogi,, New Age International Publishers Ltd., New Delhi, Basic Electronics by VK Mehta; S Chand and Co., New Delhi, Electrical Machines by SK Bhattacharya; Tata McGraw Hill, New Delhi, Basic Electronics and Linear Circuits by NN Bhargava and Kulshreshta, Tata McGraw, Hill New Delhi., Electronic principles by SK Sachdev, Dhanpat Rai and Sons, New Delhi., Electronic Devices and circuits by Rama Raddy Narora Publishing House Pvt. Ltd., New Delhi., Principles of electrical and electronics Engineering by VK Mehta; S Chand and Co., New Delhi, Digital Electronics by Malvino, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, 6, Total, , Time Allotted, (Periods), 03, 06, 09, 06, 10, 22, 56, , Marks Allotted, (%), 05, 10, 15, 10, 18, 42, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 105

Page 111 :
4.6 Universal Human Values, L-T-P, 2-0-1, Course Objectives, This introductory course input is intended, 1. To help the students appreciate the essential complementarily between, 'VALUES' and 'SKILLS' to ensure sustained happiness and prosperity, which, are the core aspirations of all human beings, 2. To facilitate the development of a Holistic perspective among students towards, life and profession as well as towards happiness and prosperity based on a, correct understanding of the Human reality and the rest of Existence. Such a, holistic perspective forms the basis of Universal Human Values and movement, towards value-based living in a natural way, 3. To highlight plausible implications of such a Holistic understanding in terms of, ethical human conduct, trustful and mutually fulfilling human behavior and, mutually enriching interaction with Nature, Thus, this course is intended to provide a much needed orientational input in value education, to the young enquiring minds., Course Methodology, 1. The methodology of this course is explorational and thus universally adaptable. It, involves a systematic and rational study of the human being vis-à-vis the rest of, existence., 2. It is free from any dogma or value prescriptions., 3. It is a process of self-investigation and self-exploration, and not of giving sermons., Whatever is found as truth or reality is stated as a proposal and the students are, facilitated to verify it in their own right, based on their Natural Acceptance and, subsequent Experiential Validation., 4. This process of self-exploration takes the form of a dialogue between the teacher and, the students to begin with, and then to continue within the student leading to continuous, self-evolution., 5. This self-exploration also enables them to critically evaluate their pre-conditionings and, present beliefs., The syllabus for the lectures is given below:,  After every two lectures of one hour each, there is one hour practice session.,  The assessment for this subject is as follows:,  Sessions Marks (Internal): 20,  Practical Marks (External): 30,  Total Marks: 50, UNIT 1: Course Introduction - Need, Basic Guidelines, Content and Process for Value, Education, 1. Understanding the need, basic guidelines, content and process for Value, Education, 2. Self-Exploration–what is it? - its content and process; ‘Natural Acceptance’ and, Experiential Validation- as the mechanism for self-exploration, 3. Continuous Happiness and Prosperity- A look at basic Human Aspirations, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 106

Page 112 :
4. Right understanding, Relationship and Physical Facilities- the basic, requirements for fulfillment of aspirations of every human being with their, correct priority, 5. Understanding Happiness and Prosperity correctly- A critical appraisal of the, current scenario, 6. Method to fulfill the above human aspirations: understanding and living in, harmony at various levels, UNIT 2: Understanding Harmony in the Human Being - Harmony in Myself!, 1. Understanding human being as a co-existence of the sentient ‘I’ and the material the, Body’, 2. Understanding the needs of Self (‘I’) and ‘Body’ - Sukh and Suvidha, 3. Understanding the Body as an instrument of ‘I’ (I being the doer, seer and enjoyer), 4. Understanding the characteristics and activities of ‘I’ and harmony in ‘I’, 5. Understanding the harmony of I with the Body: Sanyam and Swasthya; correct, appraisal of Physical needs, meaning of Prosperity in detail, 6. Programs to ensure Sanyam and Swasthya, -Practice Exercises and Case Studies will be taken up in Practice Sessions., UNIT 3: Understanding Harmony in the Family and Society- Harmony in HumanHuman Relationship, 1. Understanding Harmony in the family – the basic unit of human interaction, 2. Understanding values in human-human relationship; meaning of Nyaya and program, for its fulfillment to ensure Ubhay-tripti;, a. Trust (Vishwas) and Respect (Samman) as the foundational values of, relationship, 3. Understanding the meaning of Vishwas; Difference between intention and competence, 4. Understanding the meaning of Samman, Difference between respect and, differentiation; the other salient values in relationship, 5. Understanding the harmony in the society (society being an extension of family):, Samadhan, Samridhi, Abhay, Sah-astitva as comprehensive Human Goals, 6. Visualizing a universal harmonious order in society- Undivided Society (Akhand, Samaj), Universal Order (Sarvabhaum Vyawastha )- from family to world family!, -Practice Exercises and Case Studies will be taken up in Practice Sessions., , UNIT 4: Understanding Harmony in the Nature and Existence - Whole existence as Coexistence, 1. Understanding the harmony in the Nature, 2. Interconnectedness and mutual fulfillment among the four orders of naturerecyclability and self-regulation in nature, 3. Understanding Existence as Co-existence (Sah-astitva) of mutually interacting units in, all-pervasive space, 4. Holistic perception of harmony at all levels of existence, -Practice Exercises and Case Studies will be taken up in Practice Sessions., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 107

Page 113 :
UNIT 5: Implications of the above Holistic Understanding of Harmony on Professional, Ethics, 1. Natural acceptance of human values, 2. Definitiveness of Ethical Human Conduct, 3. Basis for Humanistic Education, Humanistic Constitution and Humanistic Universal, Order, 4. Competence in professional ethics:, a) Ability to utilize the professional competence for augmenting universal, human order, b) Ability to identify the scope and characteristics of people-friendly and, eco-friendly production systems,, c) Ability to identify and develop appropriate technologies and, management patterns for above production systems., 5. Case studies of typical holistic technologies, management models and production, systems, 6. Strategy for transition from the present state to Universal Human Order:, a), At the level of individual: as socially and ecologically responsible engineers,, technologists and managers, b), At the level of society: as mutually enriching institutions and organizations, 7. To inculcate Human Values among Students: The Role of self ,Parents and Teachers, -Practice Exercises and Case Studies will be taken up in Practice Sessions., , INSTRUCTONAL STRATEGY, The content of this course is to be taught on conceptual basis with plenty of real world, examples., , MEANS OF ASSESSMENT, , Assignments and quiz/class tests,, , Mid-term and end-term written tests, , Practical assessment, Reference Material, The primary resource material for teaching this course consists of, a. The text book (Latest Edition), R.R, Gaur, R Asthana, G P Bagaria, A foundation course in Human, Values and professional Ethics, Excel books, New Delhi., b. The teacher’s manual (Latest Edition), R.R, Gaur, R Asthana, G P Bagaria, A foundation course in Human, Values and professional Ethics – Teachers Manual, Excel books, New, Delhi., In addition, the following reference books may be found useful for supplementary reading in, connection with different parts of the course:, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 108

Page 114 :
1. B L Bajpai, 2004, Indian Ethos and Modern Management, New Royal Book, Co., Lucknow. Reprinted 2008., 2. PL Dhar, RR Gaur, 1990, Science and Humanism, Commonwealth Purblishers., 3. Sussan George, 1976, How the Other Half Dies, Penguin Press. Reprinted 1986,, 1991, 4. Ivan Illich, 1974, Energy & Equity, The Trinity Press, Worcester, and, HarperCollins,, USA, 5. Donella H. Meadows, Dennis L. Meadows, Jorgen Randers, William W., Behrens III,, 1972, limits to Growth, Club of Rome’s Report, Universe Books., 6. Subhas Palekar, 2000, How to practice Natural Farming, Pracheen(Vaidik), Krishi Tantra Shodh, Amravati., 7. A Nagraj, 1998, Jeevan Vidya ek Parichay, Divya Path Sansthan, Amarkantak., 8. E.F. Schumacher, 1973, Small is Beautiful: a study of economics as if people, mattered, Blond & Briggs, Britain., 9. A.N. Tripathy, 2003, Human Values, New Age International Publishers., Relevant websites, movies and documentaries, 1. Value Education websites, http://uhv.ac.in, http://www.aktu.ac.in, 2. Story of Stuff, http://www.storyofstuff.com, 3. Al Gore, An Inconvenient Truth, Paramount Classics, USA, 4. Charlie Chaplin, Modern Times, United Artists, USA, 5. IIT Delhi, Modern Technology – the Untold Story, 6. Case study Hevade Bazar Movie, 7. RC Shekhar , Ethical Contradiction ,Trident New Delhi, 8. Gandhi A., Right Here Right Now, Cyclewala Production, SUGGESTED DISTRIBUTION OF MARKS, Unit, 1, 2, 3, 4, 5, Total, , Time Allotted, (Periods), 08, 08, 08, 08, 10, 42, , Marks Allotted, (%), 20, 20, 20, 20, 20, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 109

Page 115 :
INDUSTRIAL TRAINING OF STUDENTS, It is needless to emphasize further the importance of Industrial Training of students, during their 3 years of studies at Polytechnics. It is industrial training, which provides, an opportunity to students to experience the environment and culture of industrial, production units and commercial activities undertaken in field organizations. It, prepares student for their future role as diploma engineers in the world of work and, enables them to integrate theory with practice. Polytechnics have been arranging, industrial training of students of various durations to meet the above objectives., This document includes guided and supervised industrial training of 4 weeks duration, to be organized during the semester break starting after second year i.e. after 4th, semester examinations. The concerned HODs along with other teachers will guide and, help students in arranging appropriate training places relevant to their specific branch., It is suggested that a training schedule may be drawn for each student before starting of, the training in consultation with the training providers. Students should also be briefed, in advance about the organizational setup, product range, manufacturing process,, important machines and materials used in the training organization., Equally important with the guidance is supervision of students training in the, industry/organization by the teachers. Students should be encouraged to write daily, report in their diary to enable them to write final report and its presentation later on., An external assessment of 50 marks has been provided in the study and evaluation, scheme of 5th Semester. Evaluation of professional industrial training report through, viva-voce/presentation aims at assessing students understanding of materials, industrial, process, practices in industry/field organization and their ability to engage in activities, related to problem solving in industrial setup as well as understanding of application of, knowledge and skills learnt in real life situations., Teachers and students are requested to see the footnote below the study and evaluation, scheme of 4th semester for further details., The teacher along with field supervisors will conduct performance assessment of, students. The components of evaluation will include the following:, a), b), c), d), , Punctuality and regularity, Initiative in learning new things, Presentation and VIVA, Industrial training report, , 15%, 15%, 15%, 55%, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 110

Page 116 :
5.1, , MASS TRANSFER OPERATIONS, L T P, 5 - 6, , RATIONALE, It is the further step of Unit Operation deals with the gas absorption, distillation, boiling point, diagrams, extraction operation, humidification and drying processes in chemical industry. The, subject have experiments as well, to be aware of the facts involved in actual process., LEARNING OUTCOMES, After the completion of this course, the students will be able to:, 1. Understands Separation Techniques of Components from gaseous mixtures., 2. Understands Separation Techniques of Liquid- Liquid mixtures & Solid -Liquid mixtures., 3. Understands cooling towers and use of humidity chart., 4. Understands different types of dryers and dryers and drying behaviours., , DETAILED CONTENTS, 1. Diffusion:, (10 Periods), Definition of diffusion, Rate of diffusion in Mass Transfer, Fick's law, diffusion in the gas, phase-Equimolecular counter diffusion, diffusion through a stationary gas (Stefan's, Law), Mass. Transfer Coefficient. Film theory and penetration theory of Mass Transfer,, Diffusion in solids. Derivation of the following relations., 2. Gas Absorption:, (12 Periods), Introduction, importance, tower packings, channeling, Limiting flow rates – Loading &, Flooding, Mechanism of absorption - two film theory, Diffusion of gases through a, stagnant gas, Diffusion in liquid phase, Rate of absorption,, (I) 1/KG.a =1/kG.a + m/kL.a, (II) 1/KL.a = 1/kL.a + 1/mkG.a, Derivation of Relation between film and overall coefficient, Factors influencing the transfer, coefficient. Gas absorption equipment – packed column, Choice of solvent for absorption,, Height of Transfer Unit (HTU), Number of Transfer Unit (NTU), Meaning and their, relationship (Simple Numerical Problems)., 3. DISTILLATION:, Various distillation methods:1. Equilibrium or flash distillation ., 2. Differential distillation, 3. Batch distillation., 4. Vacuum and Steam distillation., 5. Azeotropic and Extractive distillation., , (16 Periods), , Types of distillation columns:1. Perforated plate or sieve plate column, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 111

Page 117 :
2. Bubble cap plate column Vapor liquid equilibrium diagram, Raoult's law; Relative, volatility, constant boiling mixtures, equilibirium diagram and construction of, equilibrium diagram, Fractionating column calculation- Heat & material balance,, Reflux ratio, equilibrium plate, Location of feed plate. Sub cooled reflux; effect of, reflux ratio, Total reflux, Minimum reflux ratio Entrainment; Mc-Cable Thiele, diagram-section above and below feed plate; Intersection of operating line. Location of, q-line, optimum reflux ratio, calculation of no. of equilibrium plate by Mc-Cable Thiele, diagram. Overall plate efficiency., 4. EXTRACTION :, 1. Applications of this operation., 2. Choice of solvent., 3. Steps of extraction operation, 4. Solid Liquid extraction, construction and description of, A. Moving Bed type oil seed extractor or Bollman extractor., B. Rotocel extractor., Liquid extractor; description and construction of, A. Mixer settler extraction system., B. Perforated plate and baffle towers., , (12 Periods), , 5. HUMIDIFICATION:, (10 Periods), Definition and calculation of, 1. Humidity, 2. Percentage humidity, 3. Relative humidity, 4. Humid volume., 5. Humid heat., 6. Enthalpy and its calculation., 7. Dry bulb and wet bulb-temp., 8. Adiabatic saturation temperature., 9. Use of humidity chart. Dew point, simple numerical problem using humidity chart,, construction and description of cooling towers. ( Natural and induced draft), 6. DRYING, (10 Periods), General drying behaviour-Critical moisture content, equilibrium moisture content:, Description and construction of dryer., 1. Tray dryer., 2. Screen conveyor dryer., 3. Rotary dryer., NOTE:- At Least One Question From Each Topic., LIST OF PRACTICALS, , 1., , HEAT & MASS TRANSFER LAB. LIST OF EXPERIMENT, (At Least 7 experiment to be Performed), 1. To determine over all heat transfer coefficient for an open pan evaperater in steady, state conditions., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 112

Page 118 :
2. To determine over all heat transfer coefficient for an open pan evaporater in unsteady, state conditions., 3. To determine 'U' for a double pipe heat exchanger in steady state conditions and also, to determine efficiency of heat utilization., 4. To determine 'U' for a shell and tube heat exchanger in steady state conditions and, also to determine efficiency of heat utilization., 5. To study a shieve plate distillation operation and to calculate over-all efficiency of, the distillation column., 6. To determine steam economy of a single and double effect evaporator., 7. To study the rate of drying in a vacuum dryer., 8. To determine the pounds of volatile compounds distilled per unit pounds of steam, distilled in a steam distillation operation., 9. To determine rate of setting of crystals in a crystaliser., 10. To study the rate of drying in Rotary dryer., 11. To determine drying rate for a wet material in a Tray Dryer., 12. To study packed tower in various industries., 13. To study various extractors in solvent extraction plant., 14. To study a spray pond in suger and other industries for cooling system., 15. Determination of Thermal conductivity of Asbestus Powder., 16. Study of Insulating Material (Glass wool, Mineral wool, Ceramic blanket, Fire, brick, Fire cement, Fire clay, Asbestus power, Fire crete), MEANS OF ASSESSMENT, , Class Test, , Home Assignment, , Attendance, , Sessional Test, INSTRUCTIONAL STRATEGY, Field visit will make the students familiar with different types of column (packed/tray),, different types of packing used in the column, different types of extractors and membrane, separation techniques. This will also make the students aware of auxiliary equipment/model/, supports for different equipment. Emphasis should also be given to problem solving and, practices especially for distillation column and extraction., RECOMMENDED BOOKS, 1., 2., 3., 4., , Mass Transfer Operations by Treybal, Kogakusha Publication, Introduction to Chemical Engineering by Badger and Banchero; McGraw Hill, Publication, Unit Operations of Chemical Engineering by Mc Cabe and Smith; McGraw Hill, Publication, Mass Transfer by Sherwood Pigford and Wilke; McGraw Hill Publication, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 113

Page 119 :
5., 6., 7., 8., , Chemical Engineering Handbook by Perry and Chilton; McGraw Hill Publication, Mass Transfer by K.A Gavhane, Nirali Publication, Chemical Engineering Vol. II by Richardson & Coulson, Introduction To Chemical Engineering by Badger & Bancher, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, 6, Total, , Time Allotted, , Marks Allotted, , (Periods), , (%), , 10, 12, 16, 12, 10, 10, 70, , 12, 15, 25, 18, 15, 15, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 114

Page 120 :
5.2 POLLUTION CONTROL AND INDUSTRIAL SAFETY, L T P, 5 - 6, RATIONALE, A Chemical Engineering technician must have the knowledge of different types of pollution, caused due to industrialization so that he may help in balancing the eco-system and control the, pollution by means of control devices. The technician must know various types of accidents, which occur in chemical plants and how to safeguard them to avoid injury to men and material., Hence this subject., LEARNING OUTCOMES, After completion of this course, the students will be able to:,  Understand different types of pollution caused due to industrialization.,  Balance pollutants to save the ecosystem,  Control pollution by means of control devices,  Have knowledge of different Acts and rules about the environmental protection.,  Manage solid wastes to reduce the pollution.,  Have Knowledge of various types of accidents which occur in chemical plants, DETAILED CONTENTS, 1, , Introduction, , (10 Periods), , Environment and Pollution, Classification of pollution e.g. Land, Water, Air, Noise., Environment Impact assessment Studies, Character and origin of industrial wastes., 2., , Air Pollution, , (10 Periods), , i) Definition of air pollution, Types of Air pollutants and their sources like SPM,, SOX, NOX, NH3, F, C1, CFC, CO2 etc., ii) Air Pollution control equipment in industries., a) Settling chamber, b) Cyclone, c) Scrubber (dry & wet), d) Multi cyclone, e) Electrostatic precipitator, f) Bag Filter, iii) Ambient air quality measurement & their standards, iv) Vehicular Pollution and its control, v) Noise Pollution and its control mechanism, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 115

Page 121 :
3. Water Pollution, , (10 Periods), , Water pollution, standards for drinking water, domestic waste water and industrial, waste water. Methods of measurement of various parameter like BOD, SS, pH, COD,, TDS etc. Methods of treatment of industrial waste water like, a) Chemical treatment, b) Physio-Chemical treatment, c) Bio-chemical treatment, d) Any other advance treatment, 4. Environment Protection, , (15 Periods), , Environmental protection from hazardous chemicals waste:, Terminology relating to chemical hazards and air pollution, classification of chemical, hazards and hazardous chemicals, codes of safety for operational hazards in, laboratories, industries etc. (Reference should be made of I.S. Codes), 5. Radio Active Pollution, , (10 Periods), , Sources and effect on human, animal, plant and material. Measurement, means to, control, preventive measures., 6. Solid Waste Management, , (10 Periods), , Municipal solid waste, biomedical waste, Plastic waste and its management, solid, waste disposal methods such as open dumping, sanitary landfilling composting,, incineration., Importance of development of green area, 7. Pollution Acts, A water pollution prevention control Act 1974, Air Pollution Act 1981, Environment, protection Act 1986, Hazardous chemical manufacturing, storage and impact rules 1989, and hazardous waste and management and handling rules 1989, Regulation and control, Rules 2000., 8. Safety in Chemical Industry, , (25 Periods), , Receiving and storing chemicals- transporting and moving chemicals- Safety in, chemical reactions, pipe-lines with color coding in chemical factories. Precautions in, the case of processes in operations involving explosive or inflammable dusts, gases,, vapours etc. Maintenance of chemical plants-corrosion health hazards in common, chemical processes, Fire hazards and their prevention. Codes of practice and, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 116

Page 122 :
specification for safety equipment (Reference should be made from I.S. Codes), case, study of major chemical process industries disasters/accidents., LIST OF PRACTICALS, 1. Determination of pH value., 2. Determination of turbidity, 3. Determination of total solids, suspended solids and total dissolved solids., 4. Determination of dissolved oxygen (DO), 5. Determination of BOD., 6. Determination of COD, 7. Determination of sulphate in water, 8. Determination of chloride in water, 9. Prepare chart for treatments of different solid waste., 10. Removal of suspended impurities from air using fabric filter., 11. Removal of suspended solids by coagulation, INSTRUCTIONAL STRATEGY, Case Study of any disaster should be undertaken. Study should be data based., Field visit to the industries should be planned., Student should encouraged to undertake project work related to environmental problems., MEANS OF ASSESSMENT, , Class Test, , Home Assignment, , Attendance, , Sessional Test, RECOMMENDED BOOKS, 1. Safety in Process Plant Design by Wells, 2. Safety and Accident Prevention in Chemical Operation by H. H, Tanacatte and W. S., Wood, 3. Engineering Chemistry by P.C. Jain, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., 6., 7., , Time allotted, (Periods), 6, 6, 6, 10, 6, 8, 8, , Marks Allotted, (%), 8, 8, 8, 14, 8, 12, 12, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 117

Page 123 :
8., Total, , 20, 70, , 28, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 118

Page 124 :
5.3, , PROCESS PLANT UTILITIES, L T P, 6 - -, , RATIONALE, The objective of this subject is to teach the students about requirement of different utilities for, the process plant and effective utilization. Main utilities required for process plants are water,, steam, air and refrigerants. Steam and non-steam heating media is used for conversion of raw, material to products in reactors and to elevate the temperature in the chemical processes., Similarly, refrigeration is important to maintain the temperature in the process plant., Compressed air and process air is used in processes and instrument air is used in pneumatic, devices and controls., LEARNING OUTCOMES, After studying this course, the students will be able to:, , , , , , , Acquire the knowledge for selection of different utilities., Understand basic calculations involved in steam generation, psychometric operation, and refrigeration., Describe the different equipment used to run the process plant with different utilities., State the principles involved during water treatment, Know different fuels used in boilers, DETAILED CONTENTS, , 1. Importance of Water, , (14 Periods), , 1.1 Sources of water, storage, quality parameters like hardness, suspended solids, (SS), turbidity and alkalinity etc., hard and soft water., 1.2 Requisites of industrial water and its uses., 1.3 Methods of water treatment – flow diagram, coagulation by iron compounds like, alum, sedimentation, filtration, chemical softening and demineralization (Ion, Exchange Process), 1.4 Resins used for water softening, 1.5 Reverse osmosis and membrane separation, 1.6 Effects of impure boiler feed water - scale and sludge formation, corrosion,, priming and foaming, caustic embrittlement, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 119

Page 125 :
2. Fuels used in boilers, (08 Periods ), Types of fuels used in boilers, coal, fuel oil, rice husk, natural and biogas etc., 3. Steam and Steam Generation:, , (12 Periods), , 3.1 Properties of steam, 3.2 Problems based on enthalpy calculation for wet steam, dry saturated steam,, superheated steam, 3.3 Types of steam generators/boilers: water tube & fire tube, Solid fuel fired boiler,, waste gas fired boiler, Waste heat boiler, Fluidized bed boiler., 3.4 Scaling, trouble shooting, blow down preparing boiler for inspection, 3.5 Steam traps, pressure reducing valves (PRV), steam ejectors, boiler mountings, and accessories: feed water pump, injector, economizer, air preheater, super, heater, pressure gauge, water level indicator, safety valve etc., 3.6 Boiler Act, 4. Humidification and Cooling Towers, , (12 Periods), , Equipment used for humidification, dehumidification evaporative cooling, spray, ponds, cooling towers- principle, details and problems like scaling, use of inhibitors, like sodium and chromates etc., 5. Refrigeration:, , (12 Periods), , 5.1 Refrigeration cycles, 5.2 Different methods of refrigeration used in industry – Vapour compression, Vapor, absorption: Lithium bromide (Eco-Friendly), 5.3 Different refrigerants – Monochlorodifluoro methane (R-22), Chlorofluorocarbons, (CFC), Secondary refrigerants: Brines, 5.4 Simple calculation of C.O.P., Refrigerating effects., 6. Air Supply and Drying Unit, , (10 Periods), , 6.1 Use of compressed air, process air and instrument air, 6.2 Process of getting instrument air and process air, 6.3 Drying unit and regeneration of drying unit, 7. Non steam heating system, , (10 Periods), , Principle, construction and working of Thermic fluid heater, 8. Inert gases, , (06 Periods), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 120

Page 126 :
Nitrogen generation, nitrogen drying and supply., INSTRUCTIONAL STRATEGY, Teacher should focus on conceptual clarity., An industrial visit can be organized in relevant industries., Audio-visuals aids should be used to teach., MEANS OF ASSESSMENT,  Assignments and quiz/class tests,  Mid-term and end-term written tests, LIST OF PRACTICALS, 1., 2., 3., 4., 5., 6., 7., 8., 9., , To determine the alkalinity of water, To determine the hardness of water, To determine the variation in PH with ion exchange bed, Determination of humidity and use of humidity chart, Boiler simulator, Determination of outgoing temperature of water from any cooling tower, Observing starting procedure of thermopack or boiler, Draw & prepare the report of steam traps, Observation of use of instrument air in pneumatic control valve, , RECOMMENDED BOOKS, 1., 2., 3., 4., , Thermal Engineering by P.L. Ballaney; Khanna Publisher New Delhi, Industrial water treatment by S.T. Powel; McGraw Hill New York, Boiler Operations by Chattopadhyay; Tata McGraw Hill, New Delhi, Perry’s chemical Engineer’s Handbook by Perry R.H. Green D.W; McGraw Hill, New, York, 5. Elements of Heat Engines Vol. II,III by R.C. Patel C .J. Karmchandani; Acharya Book, Depot Vadodara, 6. Refrigeration & Air conditioning by P.N. Ananthanarayan; Tata McGraw Hill, 7. Industrial chemistry by Jain & Jain; Tata McGraw Hill, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 121

Page 127 :
SUGGESTED DISTRIBUTION OF MARKS, Topic No., Time allotted, Marks Allotted, (Periods), (%), 1., 14, 16, 2., 8, 10, 3., 12, 14, 4., 12, 14, 5., 12, 14, 6., 10, 12, 7., 10, 12, 8., 6, 08, Total, 84, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 122

Page 128 :
5.4 ARCHITECTURAL & INDUSTRIAL COATINGS, L T P, 5 - 2, RATIONALE, In this Subject those Coatings are discussed which are used in surroundings like buildings,, industries, industrial appliances and other miscellaneous Coting., LEARNING OUTCOMES, After completion of this course, the students will be able to:,  Understand the exterior & interior Coatings for architectural Application,  Understand the Industrial Coatings,  Understand Marine and High-Performance Coatings,  Understand Coatings for Substrates other than wood, Concrete and Steel, DETAILED CONTENTS, 1. Unit -1, (10 Periods), Exterior coatings, Solvent and water based coatings, Formulation considerations:, compositions, sealers ,primers, stoppers, undercoats, finish coats/ Coatings for wood,, masonry, metal etc, Substrates criteria in selecting, Coating systems, etc.; interior, coatings; factors determining selection of coatings, Coatings formulation, manufacture, & testing of Coating., 2. Unit -II, (15 Periods), Selection of decorative paints, factors in selection, choice of solvent and water as, thinner/ tinters, universal tinters, effects of tinter machines; Water soluble and water, reduicible binders such as oils, alkyds acrylics, etc.; Emulsion paints; phase of, emulsion, emulsifying agents preparation of phases, stability of emulsions, oil in water, and water in oil emulsion. Drying mechanism, Application of Architectural paint., 3. Unit -III, (20 Periods), Industrial coatings ; substrates , application and cure, air drying forced drying and, stoving, clear finishes for metal and wood , furniture finishes, lacquers automotive, coatings; materials of construction, primers, fillers, surface base coats, top coats, clear, coats refinishing, etc.; ,, 4. Unit-IV, ( 10 Periods), Marine coatings; dock and harbor installations, offshore structures , ships paints ,, fouling, organisms leaching rate, types of antifouling paints, recent developments ;, industrial structures and industrial buildings (chemical plants) substrate types and their, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 123

Page 129 :
preparation, primers, undercoats, finish coats non-convertible and convertible, red, oxide-zinc chromate, zinc rich primers /etch primers, conversion coatings, etc.., 5. Unit-V, , (15 Periods), , Miscellaneous coatings; finishes for appliances, swimming pool, can coatings, coil, coatings, coatings for metal containers, paper, plastic, leather, textile, etc., heavy duty, coatings; Surface preparation, and application /weather conditions., INSTRUCTIONAL STRATEGY, Industrial visit industry can be organized. Audio-visual should be used in teaching., MEANS OF ASSESSMENT,  Assignment and quiz/class tests,  Mid semester and end semester written tests,  Practical work, LIST OF PRACTICALS, 1. Preparation of dry and oil bound distempers, 2. Preparation of acrylic emulsion paints (exterior and interior), 3. Preparation of cement paints, LIST OF RECOMMENDED BOOKS, 1., 2., 3., 4., 5., , Organic Coating Technology, Vol I & II by H.F Payne., Surface Coatings , Vol, I & II by , OCCA, Australia, Outlines of Paint Technology by W M Morgan, Organic Coating Technology vol-2 By Henry Fleming, Payne Publisher John, Wiley & Sons., Surface Coatings: Science & Technology By Swaraj Paul Publisher John wiley &, Sons., SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, , Time allotted, (Periods), 10, 15, 20, 10, 15, , Marks Allotted, (%), 17, 22, 25, 16, 20, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 124

Page 130 :
Total, 70, 100, 5.5 SURFACE PREPARATION AND PAINT APPLICATION, L T P, 4 - 2, RATIONALE, In this Subject Students will know the importance of surface preparation. Different techniques, of surface preparation along with various application techniques are also discussed. The curing, mechanism and different types of defects in coating is discussed here., LEARNING OUTCOMES, After completion of this course, the students will be able to:,  Understand the importance of surface preparation.,  Understand different methods and types of surface preparation.,  Understand Different methods of application.,  Understand Types, Causes & Remedies of defects in Coatings., DETAILED CONTENTS, 1. SURFACE PREPARATION:, (10 Periods), Importance of surface preparation, types of substrate : Substrate, Degreasing, rust &, oxide removal, blast cleaning, degreasing mild steel and preparation of samples of wood by a, sequence of staining, filling and sealing., 2. PRE-TREATMENT:, (10 Periods), Steps of surface pre treatment process – activation, phosphating, passivation, zinc, iron, and tricationic system, coating weight., 3. PAINT APPLICATION INVOLVING ATOMIZATION:, (10 Periods), Selection criteria for application techniques, Paint application involving atomization air, assisted spraying, airless spraying, electro state spraying, compare hot and cold sprarying. Disc, and bell application and robotics in spraying, 4. PAINT APPLICATION NOT INVOLVING ATOMIZATION: (14 Periods), Paint application not involving atomization: Dipping, roller coating, coil & curtaing, coating , other application methods- brushing, hand rolling trowelling , silk screeing tumbling, , flow coating, electro deposition, anodic vs cathodic electro deposition – merit and demerits,, throwing powder, CED plate., 5. DRYING, CURING AND PAINT DEFECTS:, (12 Periods), Drying and curing process: air drying, forced drying and stoving, radiation curing, (ultraviolet and electron beam), hybrid curing, selection of curing techniques, ovens. Defects :, settling, skinning, orange peels, pin holes, crater, etc., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 125

Page 131 :
LIST OF PRACTICALS, LIST OF PRACTICALS, 1. Study of different surfaces and their preparation for coatings., i) Wood, ii) Metals, iii) Plastics, iv) Concrete/cement/bricks, 2. Removal of paints from different substances: (Preparation of Panels by, pretreatment method, (ie. Degreasing, derusting , activation , phosphating and, passivation ), i) use of sand paper, ii) use of solvents, iii) double coating layers, 3. Oil and Cup viscometer, measurements of flow of different formulations vis-àvis:, i) for different applications, ii) effect of additives, iii) effect of pigments, iv) effect of resins, v) Gardner Tube method Viscosity ( A+OZ), 4. Various application techniques:, i) Brush, ii) Spray-gun, iii) Applicator (thin film), iv) Rollers, v) Dip coating, vi) Knife coating, 5. Analysis of defects in coatings. Different defects:, Leveling, sagging, etc. use of microscopy and visual observation., 6. To find the grindness of Paint/Primer, INSTRUCTION STRATEGY, This subject is of great importance, therefore the teachers are expected to lay considerable, stress on renewable sources, their importance, production, utilization and storage system. As, far as possible, the teaching of the subject must be supplemented by showing the videos on, working principle of various renewable energy equipment and also visits to nearby places, where such equipment is installed., MEANS OF ASSESSMENT,  Assignments and quiz/class tests,  Mid-term and end-term written tests, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 126

Page 132 :
LIST OF REFERENCE BOOKS, 1. Basics of Paint Technology- Part- 2 By V.C.Maliha, Meenal. A.Sikchi, 2. Organic Coating Technology vol-2 By Henry Fleming, Payne Publisher John Wiley &, Sons., 3. Surface Coatings : Raw materials & their usage Volume-2 By OCCA-Australia, Publisher Champas & Hall, 4. Outlines of Paint Technology By W.M.Margans Publisher Edward Arnold., 5. Failure Analysis of Paints & Coatings By D wight G. Weldon Publisher John Wiley, & Sons, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, Total, , Time allotted, (Periods), 10, 10, 10, 14, 12, 56, , Marks Allotted, (%), 15, 20, 20, 25, 20, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 127

Page 133 :
5.6 RENEWABLE ENERGY SOURCES, L T P, 4 - RATIONALE, Energy is an important input in all sectors of country’s economy. Standard of living of a country, can be directly judged by per capita consumption of energy. In light of energy crises and, environmental concerns, renewable energy is the only solution to save our planet. Hence this, subject., LEARNING OUTCOMES, After completion of this course, the students will be able to:,  Understand the importance and applications of various renewable sources of energy,  Understand the types of biogas plants and electricity generation from biomass,  Identify usage of different types of wind turbines,  Understand the working of various types of collectors and applications of solar energy,  Understand different geothermal power plants,  Understand the usage of tidal and wave energy,  Understand the importance of hydrogen energy, DETAILED CONTENTS, 1. Renewable and Non-Renewable Sources of Energy, , (06 Periods), , 1.1. Introduction, 1.2. Need of renewable sources of energy, 1.3. Renewable sources of energy such as biomass, wind, solar, geothermal, tidal and, wave, hydrogen energy., 2. Biomass Energy, (08 Periods), 2.1. Introduction to biomass energy, 2.2. Resources of biomass energy, 2.3. Types of biogas plants-fixed dome and floating type, 2.4. Electricity generation from biomass, 2.5. Other useful products from biomass, 3. Wind Energy, , (06 Periods), , 3.1. Introduction to wind energy, 3.2. Site selection of wind mill, 3.3. Types of Wind Turbines-Horizontal axis wind turbine (HWAT) and vertical axis, wind turbine (VAWT), their construction, working, advantages and disadvantages, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 128

Page 134 :
4., , Solar Energy, , (20 Periods), , 1.1. Introduction to solar energy, solar spectral and green house effect, 1.2. Classification of solar thermal collectors- flat type, focusing type and central tower, receivers, their construction and working, 1.3. Application of solar energy like solar cooker, solar water heater, solar crop dryers, and solar pond, 1.4. Solar photo voltaic- construction and working principle, 1.5. Solar energy storage methods, 5., , Geothermal Energy, , (06 Periods), , 6., , 5.1. Introduction and its significance, 5.2. Geothermal Power Plants-dry stream, flash steam and binary cycle, Tidal and Wave Energy, (06 Periods), 6.1. Generation of Tidal and Wave Energy, 6.2. Tidal Power Plant, 6.3. Wave Power Plant, , 7., , Hydrogen Energy, , (04 Periods), , 7.1. Methods for hydrogen production, 7.2. Storage of Hydrogen, 7.3. Transportation of Hydrogen-through pipelines and containers, INSTRUCTION STRATEGY, This subject is of great importance, therefore the teachers are expected to lay considerable, stress on renewable sources, their importance, production, utilization and storage system. As, far as possible, the teaching of the subject must be supplemented by showing the videos on, working principle of various renewable energy equipment and also visits to nearby places, where such equipment is installed., MEANS OF ASSESSMENT,  Assignments and quiz/class tests,  Mid-term and end-term written tests, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 129

Page 135 :
LIST OF REFERENCE BOOKS, 1., 2., 3., 4., , Non Conventional Energy Sources by G.D. Rai; Khanna Publishers, New Delhi., Renewable and Conventional Energy by S. Rao; Khanna Publisher, New Delhi, Non-Conventional Sources of Energy by Umesh Chandra Sharma; Studium Press,, Texas, USA, Solar Energy by S.P. Sukhatme; Tata McGraw Hill Publishing Co. Ltd., New Delhi, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, 6, 7, Total, , Time allotted, (Periods), 06, 08, 06, 20, 06, 06, 04, 56, , Marks Allotted, (%), 10, 14, 10, 38, 10, 10, 08, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 130

Page 136 :
6.1, , PROCESS CONTROL, L T P, 6 - 4, , RATIONALE, The subject Automatic Process Control deals with the different types of controls in processes, in chemical industries including automatic control systems. Process characteristics is of first, order (i.e. time constant element) and second order (i.e. oscillatory type element). Different, modes of control action and closed loop in automatic control are well known. The student, will be well conversant with these process control systems., , LEARNING OUTCOMES, After completion of this course, the students will be able to:, 1. Explain the importance of automation and its applications in chemical, industries., 2. Explain the basic principles of process control in industrial processes., 3. Determine the time and response of first order and second order systems for, step, ramp, impulse and sinusoidal inputs., 4. Handle chemical processes by framing it in block diagrams., 5. Identify open and closed loop systems., 6. Implement different controllers to various industrial processes., DETAILED CONTENTS, 1., , Introduction, (05 Periods), Concept of automatic control, Advantages of automatic control, manual and automatic, control, physical and block diagrams., , 2., , Elements of control System, (10 Periods), Definition- input means, controlling means, actuating means, measuring means, final, control elements., , 3., , Process Characteristics, (15 Periods), Process variables, process degree of freedom, forcing function, step function, ramp,, impulse, sinusoidal function and Laplace transformation., , 4., , Elements of process dynamics, (22 Periods), Time constant and oscillatory element, determination of system function or transfer, function of the following- sketch physical diagram and block diagram, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 131

Page 137 :
7.1, , 7.2, , Ist order system or time constant element- Naked bulb thermometer, Stirred tank, heater, Mixing process, R.C. Circuit, Liquid levels, Two time constant type liquid, vessel cascaded i.e. non interacting and non-cascaded, i.e. interacting., IInd order system or oscillatory type element- Bulb in themowell, Mechanical, damper., , Response of Ist order system to step, ramp, impulse and sinusoidal inputs. Response of, IInd order system to step change (transient response)., 5. Controller Characteristic or Modes of Control Action, (15 Periods), Block diagram of a control system, negative and positive feedback system, servo and, regulatory problem, control valve mechanism and its transfer function, elements of, controller, proportional control, integral control, proportional-integral control,, proportional derivative control proportional-integral-derivative control, two positions, control., 6. Closed Loop in Automation Control, (14 Periods), Standard block diagram symbol, overall transfer function for a single loop system,, overall transfer function for change in set point and for change in load, overall transfer, function in multi loop control system, unit step response of the following:, 6.1 Proportional control at stirred tank heater for set point change and for load, change., 6.2 Proportional integral control of stirred tank heater for set point change and load, change, 7. Introduction to Programmable Logic Controller (PLC) and Distributed Control System, (DCS), (03 Periods), LIST OF PRACTICALS (at least 8 experiments to be performed), 1., To calibrate pressure gauge with the help of dead weight pressure gauge, 2., To calibrate bimetallic thermometer, resistance thermometer, thermocouple, 3., To determine the characteristics of a flapper nozzle system., 4., To study on-off controller for temperature control., 5., To study constructional details of strip chart recorder., 6., To study constructional details of circular chart recorder., 7., To calibrate the pneumatic valve., 8., To calibrate the given manometer for level measurement., 9., To measure time constant of a single capacity thermal process (water bath and heater), 10., To study the transient response of first order system (thermo couple) and find out time, constant., 11., To study the response of two tank in non-interacting liquid level system., 12., To study the response of two tank in interacting liquid level system., 13., To study the response of bimetallic thermometer for a step input and find outs its, time constant., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 132

Page 138 :
APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 133

Page 139 :
INSTRUCTIONAL STRATEGY, The subject gives the knowledge of various process, instruments and controls to measure, process parameters. So the theoretical knowledge of this subject should be properly imparted, to the students with the help of practical examples. Each topic should be supplemented with, examples., , MEANS OF ASSESSMENT, , Class Test, , Home Assignment, , Sessional Test, , Practical work, , RECOMMENDED BOOKS, 1. Industrial Instrumentation by Donald P. Eckman, Wiley Eastern Publications., 2. Process System Analysis and Control by Coughanowr and Steven LeBlanc, McGraw Hill, publications., 3. Industrial Instrumentation by SK Singh, Tata McGraw Hill Publications., 4. Principles of Industrial Instrumentation by D. Patranabis; Tata McGraw Hill Company, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, 6, 7, Total, , Time Allotted, (Periods), 05, 10, 15, 22, 15, 14, 03, 84, , Marks Allotted, (%), 05, 12, 18, 25, 20, 16, 04, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 134

Page 140 :
6.2 COATING PROPERTIES, EVALUATION AND QUALITY CONTROL, L T P, 5 - 6, RATIONALE, This subject equips the students with basic paint testing. In the subject students learns the, fundamental concepts on which paint properties to be evaluated and practically done in, quality control lab., LEARNING OUTCOMES, After completion of this course, the students will be able to:,  Have understanding scope of material properties.,  Practical Test of Paint Properties.,  Understanding the Performance of Paint Film,  Determination of individual raw material properties.,  Understanding of comparative properties of Architectural paints vs Industrial Paints.,  Learning of Paint effectiveness against Corrosion.,  Quality control of paints according specification., , DETAILED CONTENTS, 1. COATING PROPERTIES:, (14 Periods), General properties of oil paints, enamels varnishes and lacquers, their comparative, merits, classification of paints, and adhesive and cohesion properties, factors affecting adhesion, , wetting power, optical properties , color,L,a,b, and E values, gloss, hiding etc, physical,, chemical and mechanical properties of paint films factors affecting coating properties,, rheological properties, Newtonian and non Newtonian liquids, thixo/tropy, factors affecting, viscosity influence of the rheological behavior., 2. TESTING OF LIQUID FILMS:, (16 Periods), Objective of paint testing, quality control procedures, standard specifications and test, methods, classifications of paint test and evaluation tests, test on liquid paints; density,, dispersion, viscosity and consistency, wet opacity and dry hiding, spreading capacity and, spreading rate, wet & dry film thickness, drying time etc., 3. TESTING OF DRY PAINT FILMS:, (14 Periods), Test of dried coatings, color and color fastness, light fastness, gloss, flexibility,, adhesion impact test, hardness, mar resistance, abrasion, resistance, water and moisture, resistance, Protection against corrosion ( PAC) ,and salt spray test, resistance to chemical ,, Vaseline resistance (petrol resistance) to lubricating oils and solvents, resistance to heat and, fire, air permeability etc, evaluation of water based paints, biological effects on paint films., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 135

Page 141 :
4. ANALYSIS OF PAINTS & VARNISHES:, (12 Periods), Analysis of paints and varnishes, volatile and non volatile matter, pigment content ,, binder or solid vehicle content, water content, ash content, pigment, binder and solvent, analysis., 5. DURABILITY TESTS:, (16 Periods), Ageing properties of coatings, weatherometery, natural and outdoor durability test,, accelerated out door weathering, artificial weathering test in a weatherometer, defects observed, in paint film on exposure, concept of quality circles, introduction to ISO., , LIST OF PRACTICALS, TESTING & QUALITY CONTROL LAB, LIST OF EXPERIMENT, 1. To check the gloss and drying of paints, 2. To prepare copal varnish and check the gloss, 3. To check the drying time and gloss varnish, 4. To prepare bitumen varnish and check the hardness, 5. To check the glass, drying time, hardness and flexibility of paints, 6. To prepare dry distemper and check the adhesion, 7. To prepare cement paint and check the adhesion, 8. To prepare cement colour and check the stability, 9. To prepare ready mixed paints and test the drying time, glass and resistance, properties, 10. To prepare emulsion paint and test the gloss and drying time., INSTRUCTIONAL STRATEGY, The subject gives the knowledge of various process, instruments and controls to measure, process parameters. So the theoretical knowledge of this subject should be properly imparted, to the students with the help of practical examples. Each topic should be supplemented with, examples., MEANS OF ASSESSMENT, , Class Test, , Home Assignment, , Sessional Test, , Practical work, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 136

Page 142 :
RECOMMENDED BOOKS,  Organic Coating Technology Vol-1 By- Henry Fleming Payne Publisher John Willey, & sons,  Surface Coatings : Raw materials & their usage Vol-2 By-OCCA-Australia Publisher, Champan & Hall,  Outlines of Paint Technology By -W.M.Morgans Publisher Edward Arnold,  Paint and Coating Testing Manual By- Joshep V. Koleske Publishur ASTM, International, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, Total, , Time Allotted, (Periods), 14, 14, 14, 12, 16, 70, , Marks Allotted, (%), 20, 20, 20, 15, 25, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 137

Page 143 :
6.3, , ENERGY CONSERVATION, L T P, 3 - 2, , RATIONALE, The requirement of energy has increased manifolds in last two decades due to rapid, urbanization and growth in industrial/service sector. It has become challenging task to meet, ever increasing energy demands with limited conventional fuels and natural resources. Due to, fast depletion of fossil fuels and a tremendous gap between supply and demand of energy, it is, essential to adopt energy conservation techniques in almost every field like industries,, commercial and residential sectors etc. Energy conservation has attained priority as it is, regarded as additional energy resource. Energy saved is energy produced. This course covers, the concepts of energy management and its conservation. It gives the insight to energy, conservation opportunities in general industry and details out energy audit methodology and, energy audit instruments., LEARNING OUTCOMES, After undergoing this subject, the students will be able to:, , , , , , , , 1., , define principles and objectives of energy management and energy audit., understand Energy Conservation Act 2001 and its features., understand various forms & elements of energy., identify electrical and thermal utilities. Understand their basic principle of operation, and assess performance of various equipments., identify areas of energy conservation and adopt conservation methods in various, systems., evaluate the techno economic feasibility of the energy conservation technique adopted., DETAILED CONTENTS, Basics of Energy, 1.1 Classification of energy- primary and secondary energy, commercial and noncommercial energy, non-renewable and renewable energy with special reference to, solar energy, Capacity factor of solar and wind power generators., 1.2 Global fuel reserve, 1.3 Energy scenario in India and state of U.P. Sector-wise energy consumption, (domestic, industrial, agricultural and other sectors), 1.4 Impact of energy usage on climate, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 138

Page 144 :
2., , Energy Conservation and EC Act 2001, 2.1 Introduction to energy management, energy conservation, energy efficiency and its, need, 2.2 Salient features of Energy Conservation Act 2001 & The Energy Conservation, (Amendment) Act, 2010 and its importance. Prominent organizations at centre and, state level responsible for its implementation., 2.3 Standards and Labeling: Concept of star rating and its importance, Types of, product available for star rating, , 3., , Electrical Supply System and Motors, 3.1, 3.2, 3.3, 3.4, , Types of electrical supply system, Single line diagram, Losses in electrical power distribution system, Understanding Electricity Bill: Transformers Tariff structure, Components of, power (kW, kVA and kVAR) and power factor, improvement of power factor,, Concept of sanctioned load, maximum demand, contract demand and monthly, minimum charges (MMC), 3.5 Transformers: Introduction, Losses in transformer, transformer Loading, Tips for, energy savings in transformers, 3.6, , 4., , Energy Efficiency in Electrical Utilities, 4.1, , 4.2, 4.3, , 5., , Electric Motors, Types of motors, Losses in induction motors Features and characteristics of energy, efficient motors, Estimation of motor loading, Variation in efficiency and power, factor with loading, Tips for energy savings in motors, , Pumps: Introduction to pump and its applications, Efficient pumping system, operation, Energy efficiency in agriculture pumps, Tips for energy saving in, pumps, Compressed Air System: Types of air compressor and its applications, Leakage, test, Energy saving opportunities in compressors., Energy Conservation in HVAC and Refrigeration System: Introduction,, Concept of Energy Efficiency Ratio (EER), Energy saving opportunities in, Heating, Ventilation and Air Conditioning (HVAC) and Refrigeration Systems., , Lighting and DG Systems, 5.1, 5.2, , Lighting Systems: Basic definitions- Lux, lumen and efficacy, Types of different, lamps and their features, Energy efficient practices in lighting, DG Systems: Introduction, Energy efficiency opportunities in DG systems,, Loading estimation, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 139

Page 145 :
6., , Energy Efficiency in Thermal Utilities, 6.1, 6.2, , 6.3, 6.4, 7., , Thermal Basics: Thermal energy, Energy content in fuels, Energy Units and its, conversions in terms of Metric Tonne of Oil Equivalent (MTOE), Energy Conservation in boilers and furnaces : Introduction and types of boilers,, Energy performance assessment of boilers, Concept of stoichiometric air and, excess air for combustion, Energy conservation in boilers and furnaces, Do’s and, Don’ts for efficient use of boilers and furnaces, Cooling Towers: Basic concept of cooling towers, Tips for energy savings in, cooling towers, Efficient Steam Utilization, , Energy Conservation Building Code (ECBC), 7.1 ECBC and its salient features, 7.2 Tips for energy savings in buildings: New Buildings, Existing Buildings, , 8., , Waste Heat Recovery and Co-Generation, 8.1 Concept, classification and benefits of waste heat recovery, 8.2 Concept and types of co-generation system, , 9., , General Energy Saving Tips, Energy saving tips in:, 9.1, 9.2, 9.3, 9.4, 9.5, 9.6, 9.7, 9.8, 9.9, 9.10, , 10., , Lighting, Room Air Conditioner, Refrigerator, Water Heater, Computer, Fan, Heater, Blower and Washing Machine, Colour Television, Water Pump, Cooking, Transport, , Energy Audit, 10.1, 10.2, 10.3, , Types and methodology, Energy audit instruments, Energy auditing reporting format, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 140

Page 146 :
PRACTICAL EXERCISES, 1., 2., 3., 4., 5., 6., , To conduct load survey and power consumption calculations of small building., To check efficacy of different lamps by measuring power consumption and lumens, using lux meter., To measure energy efficiency ratio (EER) of an air conditioner., To measure effect of valve throttling and variable frequency drive (VFD ) on energy, consumption by centrifugal pump., To measure and calculate energy saving by arresting air leakages in compressor., To measure the effect of blower speed on energy consumed by it., , STUDENT ACTIVITIES ON ENERGY CONSERVATION/ENERGY EFFICIENCY, , , , , , , Presentations of Case Studies, Debate competitions, Poster competitions, Industrial visits, Visual Aids, , INSTRUCTIONAL STRATEGY, Teachers are expected to lay considerable stress on understanding the basic concepts in energy, conservation, principles and their applications. For this purpose, teachers are expected to give, simple problems in the class room so as to develop necessary knowledge for comprehending, the basic concepts and principles. As far as possible, the teaching of the subject must be, supplemented by demonstrations and practical work in the laboratory. Visits to industries must, be carried out. Expert from industry must be invited to deliver talks on energy conservation to, students and faculty., RECOMMENDED BOOKS, 1., 2., 3., 4., , Guide book on General Aspects of Energy Management and Energy Audit by Bureau, of Energy Efficiency, Government of India. Edition 2015, Guide book on Energy Efficiency in Electrical Utilities, by Bureau of Energy, Efficiency, Government of India. Edition 2015, Guide book on Energy Efficiency in Thermal Utilities, by Bureau of Energy Efficiency,, Government of India. Edition 2015, Handbook on Energy Audit & Environmental Management by Y P Abbi & Shashank, Jain published by TERI. Latest Edition, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 141

Page 148 :
6.4, , PRINTING & PACKAGING TECHNOLOGY, L T P, 6 -, , RATIONALE, To understand different types of inks, their manufacturing and properties Printing Process, various Packaging Techniques and its end uses., Hence this subject., LEARNING OUTCOMES, After completion of this course, the students will be able to:,  Understand different types of inks and their formulation and manufacturing.,  Understand Different Printing Process.,  Learn Packaging Technology, DETAILED CONTENTS, 1. MAJOR PRINTING SYSTEM:, (14 Periods), Principle of printing, description and schematic diagram e;g; Typographic ,, Planographic , Gravure, flaxo and screen process, classification of printing inks , mechanism, of ink drying, color matching and process printing., 2. TESTING & EVALUATION OF RAW MATERIAL:, (10 Periods), Testing and evaluation of raw materials for their use in ink manufacturing., 3. PRINCIPLES OF INK FORMULATION:, (18 Periods), Principles of ink formulations and characteristics of various types of process ink e.g., letter press, offset, lithographic, gravures, flexographic and screen inks for various substrates, e.g. paper, plastic, febric, leathers, glass and metal., 4. TYPES OF INK & THERE MANUFACTURING:, (20 Periods), Inks for newspapers, publication work, posters, labels and packaging materials, heat set, and quick set inks for multi color printing , metal decoding inks , over print varnishes and, lacquers, magnetic inks, ceramic inks, inks for printed circuit boards, and other miscellaneous, inks, water based inks., Different methods and machinery used laboratory equipments, and ink testing, factory layout, hazard and pre caution , various ink troubles and remedial, measures., 5. PACKAGING:, (20 Periods), Concept of packaging, packaging values, scope of packaging: Toys, general, consumables, cosmetics food pharmaceuticals, engineering material and other utilities., A. PACKAGING FORMS:, Packaging forms: wood containers, glasses wares, metal containers, paper & paper, boards, folded cartons and setup boxes., B. TYPES PACKAGING:, Corrugated fibre board , fibre tubes, cans and drums, plastics: films and foils., C. HAZARDS:, Biotic and abiotic hazards associated with packages., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 143

Page 149 :
INSTRUCTIONAL STRATEGY, Industrial visit to any Printing & Packing industry can be organized. Audio-visual should be, used in teaching., MEANS OF ASSESSMENT,  Assignment and quiz/class tests,  Mid semester and end semester written tests,  Practical work, LIST OF RECOMMENDED BOOKS, 1., Printing Ink Manual By R.H.Leach & R.J.Pierce, 2., Handbook of Package Engineering By Joseph F.Hanlon, 3., Edible Coatings & Soluble Packaging By Roger Daniels, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, Total, , Time allotted, (Periods), 14, 10, 18, 21, 21, 84, , Marks Allotted, (%), 15, 15, 20, 25, 25, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 144

Page 150 :
6.5, , INDUSTRIAL MANAGEMENT AND ENTREPRENEURSHIP, DEVELOPMENT, L, 5, , T, -, , P, -, , RATIONALE, In the present day scenario, it has become imperative to impart entrepreneurship and, management concepts to students so that a significant percentage of them can be directed, towards setting up and managing their own small enterprises. It may be further added that an, entrepreneurial mind set with managerial skills helps the student in the job market. This subject, focuses on imparting the necessary competencies and skills of enterprise set up and its, management., LEARNING OUTCOMES, After undergoing this course, the students will be able to :, , , , , , , , , , , , , , Know about various schemes of assistance by entrepreneurial support agencies, Conduct market survey, Prepare project report, Explain the principles of management including its functions in an organisation., Have insight into different types of organizations and their structures., Inculcate leadership qualities to motivate self and others., Manage human resources at the shop-floor, Maintain and be a part of healthy work culture in an organisation., Use marketing skills for the benefit of the organization., Maintain books of accounts and take financial decisions., Undertake store management., Use modern concepts like TQM, JIT and CRM., DETAILED CONTENTS, SECTION – A, , ENTREPRENEURSHIP, 1., , Introduction, 1.1, 1.2, , (04 Periods), , Concept /Meaning and its need, Qualities and functions of entrepreneur and barriers in entrepreneurship, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 145

Page 151 :
1.3, 1.4, , 2., , Market Survey and Opportunity Identification/Ideation, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, , 3., , Sole proprietorship and partnership forms and other forms of business, organisations, Schemes of assistance by entrepreneurial support agencies at National, State,, District –level, organisation: NSIC, NRDC, DC, MSME, SIDBI, NABARD,, NIESBUD, HARDICON Ltd., Commercial Banks, SFC’s TCO, KVIB, DIC,, Technology Business Incubators (TBI) and Science and Technology Entrepreneur, Parks, , Scanning of the business environment, Salient features of National and Haryana State industrial policies and resultant, business opportunities, Types and conduct of market survey, Assessment of demand and supply in potential areas of growth, Identifying business opportunity, Considerations in product selection, Converting an idea into a business opportunity, , Project report Preparation, 3.1, 3.2, 3.3, 3.4, 3.5, , (04 Periods), , (06 Periods), , Preliminary project report, Detailed project report including technical, economic and market feasibility, Common errors in project report preparations, Exercises on preparation of project report, Sample project report, SECTION –B, , MANAGEMENT, 4., , Introduction to Management, 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, , (06 Periods), , Definitions and importance of management, Functions of management: Importance and process of planning, organising,, staffing, directing and controlling, Principles of management (Henri Fayol, F.W. Taylor), Concept and structure of an organisation, Types of industrial organisations and their advantages, Line organisation, staff organisation, Line and staff organisation, Functional Organisation, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 146

Page 152 :
5., , Leadership and Motivation, 5.2, 5.3, , 6., , 6.2, , 7., , 8., , 9., , Leadership: Definition and Need, Qualities and functions of a leader, Manager Vs, leader, Types of leadership, Case studies of great leaders, Motivation: Definition and characteristics, Importance of self motivation, Factors, affecting motivation, Theories of motivation (Maslow, Herzberg, Douglas,, McGregor), , Management Scope in Different Areas, 6.1, , (08 Periods), , (14 Periods), , Human Resource Management: Introduction and objective, Introduction to Man, power planning, recruitment and selection, Introduction to performance appraisal, methods, Material and Store Management: Introduction functions, and objectives, ABC, Analysis and EOQ, , 6.3, , Marketing and sales: Introduction, importance, and its functions, Physical, distribution, Introduction to promotion mix, Sales promotion, , 6.4, , Financial Management: Introductions, importance and its functions, knowledge of, income tax, sales tax, excise duty, custom duty, VAT, GST, , Work Culture, , (08 Periods), , 7.1, 7.2, , Introduction and importance of Healthy Work Culture in organization, Components of Culture, , 7.3, , Importance of attitude, values and behavior, , 7.4, , Behavioural Science – Individual and group behavior., , 7.5, , Professional ethics – Concept and need of Professional Ethics and human, values., , Basic of Accounting and Finance, , (10 Periods), , 8.1, , Basic of Accounting: Meaning and definition of accounting, Double entry system, of book keeping, Trading account, PLA account and balance sheet of a company, , 8.2, , Objectives of Financial Management: Profit Maximization v/s Wealth, Maximization, , Miscellaneous Topics, 9.1, , (10 Periods), , Total Quality Management (TQM): Statistical process control, Total employees, Involvement, Just in time (JIT), , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 147

Page 153 :
9.2, , Intellectual Property Right (IPR) : Introduction, definition and its importance,, Infringement related to patents, copy right, trade mark, INSTRUCTIONAL STRATEGY, Some of the topics may be taught using question/answer, assignment, seminar or case study, method. The teacher will discuss stories and case studies with students, which in turn will, develop appropriate managerial and entrepreneurial qualities in the students. In addition, expert, lecturers may also be arranged from outside experts and students may be taken to nearby, industrial organisations on visit. Approach extracted reading and handouts may be provided., MEANS OF ASSESSMENT, , , , , Assignments and quiz/class tests, Mid-term and end-term written tests, Model/Prototype making., , RECOMMENDED BOOKS, 1. A Handbook of Entrepreneurship, Edited by BS Rathore and Dr JS Saini; Aapga, Publications, Panchkula (Haryana), 2. Entrepreneurship Development and Management by J.S.Narang; Dhanpat Rai & Sons,, Delhi., 3. Entrepreneurship Development by CB Gupta and P Srinivasan, Sultan Chand and Sons,, New Delhi, 4. Handbook of Small Scale Industry by PM Bhandari, 5. Entrepreneurship Development and Management by MK Garg, 6. E-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., Websites for Reference:, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, 6, 7, 8, 9, Total, , Time Allotted, (Periods), 04, 04, 06, 06, 08, 14, 08, 10, 10, 70, , Marks Allotted (%), 06, 06, 08, 08, 12, 20, 12, 14, 14, 100, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 148

Page 154 :
6.6, , PROJECT WORK, L T P, - - 8, , RATIONALE, Project Work aims at developing innovative skills in the students whereby they apply in totality, the knowledge and skills gained through the course work in the solution of particular problem, or by undertaking a project. In addition, the project work is intended to place students for, project oriented practical training in actual work situation for the stipulated period., LEARNING OUTCOMES, After undergoing the project work, the students will be able to:, , , , , , , , Apply in totality the knowledge and skills gained through the course work in the, solution of particular problem or by undertaking a project., Develop understanding regarding the size and scale of operations and nature of fieldwork in which students are going to play their role after completing the courses of, study, Develop understanding of subject based knowledge given in the classroom in the, context of its application at work places., Develop firsthand experience and confidence amongst the students to enable them to, use and apply polytechnic/institute based knowledge and skills to solve practical, problems related to the world of work., Develop abilities like interpersonal skills, communication skills, positive attitudes and, values etc., Assemble/fabricate and test an electronics gadget., , General Guidelines, The individual students have different aptitudes and strengths. Project work, therefore, should, match the strengths of students. For this purpose, students should be asked to identify the type, of project work, they would like to execute. The activity of problem identification should begin, well in advance (say at the end of second year). Students should be allotted a problem of, interest to him/her as a major project work. It is also essential that the faculty of the respective, department may have a brainstorming session to identify suitable project assignments for their, students. The project assignment can be individual assignment or a group assignment. There, should not be more than 3 students if the project work is given to a group. The project work, identified in collaboration with industry should be preferred., This practical training cum project work should not be considered as merely conventional, industrial training in which students are sent at work places with either minimal or no, supervision. This experience is required to be planned in advance and supervised on regular, basis by the polytechnic faculty. For the fulfillment of above objectives, polytechnics may, establish close linkage with 8-10 relevant organization for providing such an experience to, students. It is necessary that each organization is visited well in advance and activities to be, performed by students are well defined. The chosen activities should be such that it matches, with the curricular interest to students and of professional value to industrial/ field, organizations. Each teacher is expected to supervise and guide 5-6 students., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 149

Page 155 :
The project assignments may consist of:, 1. Preparation of Powder Coating ., 2. Preparation of High Performance Coating., 3. CED & AED Coatings preparation., 4. Prototype of Ball mill ., 5. Development of prototypes, 6. Study of the process of manufacturing of paints, detergents etc., , NOTE:, The list is only the guideline for selecting a project; however a student is at liberty to select any, other related project of his choice independently under guidance of his teacher., A suggestive criterion for assessing student performance by the external (person from, industry) and internal (teacher) examiner is given in table below:, Sr. Performance Criteria, Max.**, Rating Scale, No., Marks Excel Very, Good Fair Poor, lent, Good, 1., Selection of project assignment, 10%, 10, 8, 6, 4, 2, 2., Planning and execution of, 10%, 10, 8, 6, 4, 2, considerations, 3., Quality of performance, 20%, 20, 16, 12, 8, 4, 4., Providing solution of the, 20%, 20, 16, 12, 8, 4, problems or production of final, product, 5., Sense of responsibility, 10%, 10, 8, 6, 4, 2, 6., Self expression/, 5%, 5, 4, 3, 2, 1, communication skills, 7., Interpersonal skills/human, 5%, 5, 4, 3, 2, 1, relations, 8., Report writing skills, 10%, 10, 8, 6, 4, 2, 9, Viva voce, 10%, 10, 8, 6, 4, 2, Total marks, 100, 100, 80, 60, 40, 20, The overall grading of the practical training shall be made as per following table., In order to qualify for the diploma, students must get “Overall Good grade” failing which the, students may be given one more chance to improve and re-evaluate before being disqualified, and declared “not eligible to receive diploma ”. It is also important to note that the students, must get more than six “goods” or above “good” grade in different performance criteria items, in order to get “Overall Good” grade., , i), ii), iii), iv), , Range of maximum marks, , Overall grade, , More than 80, 79 <> 65, 64 <> 50, 49 <> 40, , Excellent, Very good, Good, Fair, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 150

Page 156 :
v), , Less than 40, , Poor, , Important Notes, 1., , This criteria must be followed by the internal and external examiner and they should see, the daily, weekly and monthly reports while awarding marks as per the above criteria., , 2., , The criteria for evaluation of the students have been worked out for 200 maximum marks., The internal and external examiners will evaluate students separately and give marks as, per the study and evaluation scheme of examination., , 3., , The external examiner, preferably, a person from industry/organization, who has been, associated with the project-oriented professional training of the students, should evaluate, the students performance as per the above criteria., , 4., , It is also proposed that two students or two projects which are rated best be given merit, certificate at the time of annual day of the institute. It would be better if specific nearby, industries are approached for instituting such awards., , The teachers are free to evolve other criteria of assessment, depending upon the type of, project work., It is proposed that the institute may organize an annual exhibition of the project work done by, the students and invite leading Industrial organisations in such an exhibition., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 151

Page 157 :
10., , RESOURCE REQUIREMENT, , 10.1, , PHYSICAL RESOURCES, , (A), , Space requirement, Norms and standards laid down by All India Council for Technical Education (AICTE), are to be followed to work out space requirement in respect of class rooms, tutorial, rooms, drawing halls, laboratories, space required for faculty, student amenities and, residential area for staff and students., , (B), , Equipment requirement:, , Following Laboratories are required for diploma programme in Chemical Engineering:,  Communication Laboratory,  Applied Physics Laboratory,  Applied Chemistry Laboratory,  Engineering Drawing,  Electrical Engineering Laboratory,  Basics of IT/Computer Applications \Laboratory,  Carpentry Shop,  Painting and Polishing Shop,  Basics of Electrical and Electronic Engg.,  Welding Shop,  Fitting and Plumbing Shop,  Sheet Metal Shop,  Mason Shop,  Machine Shop,  Mechanical Operations and Solid Handling/Fluid Mechanics Laboratory,  Heat and Mass Transfer Laboratory,  Environment Engineering Laboratory,  Petroleum Processing Laboratory,  Chemical Technology Laboratory,  Chemical Reaction Engg. Lab.,  Process Control,  Energy Conservation Lab.,  Pollution Control and Industrial Safety,  Fertilizer Technology, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 152

Page 158 :
EQUIPMENT REQUIRED, Sr., No. Description, COMMUNICATION LABORATORY, 1. Stools, 2. Display Board/Screen, 3. Sound recording and playing system, 4. Audio cassettes, 5. Overhead Projector, 6. Transparencies slides, 7. TV, VCR and camera for video recording, 8. English spoken course, 9. A Quiz room equipped with two way audio system, back, projection system and slide projector, 10. Miscellaneous, APPLIED PHYSICS LABORATORY, 1., Vernier calipers, Working length 160 mm, Internal and external dia with, locking arrangement, 2., Screw Gauges, Working length 15 mm, pitch 0.5 mm, least count .005, mm, 3., Spherometers, Distance between legs 2.5 mm, pitch 0.5 mm, least count, .005 mm., 4., Mirrors (convex, concave), 5., Pendulum Setup, 6., Gravesand’s Apparatus, 7., Inclined Plane Setup, 8., Flywheel Setup, 9., Prism, 10., Spectrometer, 11., DC Ammeters, Moving coil weston-type ammeter with ebonite stand, 12., DC Miliammeters, 13., DC Microammeters, 14., DC voltmeters, 15., DC Millivoltmeters, , Qty, , Total Price, (Rs), , 40, 2, 1, 60, 1, 100, 1 each, 1, 1, , 10,000, 6,000, 6,000, 2,000, 5,000, 500, 20,000, 2,000, 30,000, , LS, , 1,500, , 12, , 2,000, , 12, , 2,000, , 12, , 2,000, , 5 Each, 02, 02, 02, 02, 05, 02, 10, , 1,500, 4,000, 3,000, 2,000, 4,000, 1,500, 25,000, 3,500, , 2, 2, 10, 10, , 1,000, 700, 700, 2,000, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 153

Page 159 :
Sr., No., 16., 17, 18., 19., 20., 21., 22., 23., 24., 25., 26., 27., 28., 29., 30., 31., 32., 33., 34., , Description, Sensitivity Galvanometer, Student Galvanometers, Demonstration type DC Ammeters, Range; 0 to 1 Amp., D type DC Voltmeter, Range : 0 to 1 Volt, D type Galvanometers, Sensitivity : 20 microamperes per scale division,, Resistance boxes (dial type) assorted, Rheostats, Miscellaneous items (Spring, Pan, Glycerine, Optic, fibre, Ferromagnetic material), Fortin’s Barometer (Wall type), Stoke’s Apparatus, Gumther’s Apparatus, Resonance Tube Apparatus with accessories and, Tuning fork set, Sodium Lamp setup with Biprism, Ohmic resistance coil, Slide wire bridge, PN Junction diode Apparatus, Laser (as per requirement), Numerical aperture setup, Miscellaneous, , APPLIED CHEMISTRY LABORATORY, 1., Digital Balance, , Qty, 2, 10, 2, , Total Price, (Rs), 800, 4,000, 1,000, , 2, , 1,000, , 8, , 8,000, , 8, 10, LS, , 8,000, 4.000, 2,000, , 2, 2, 2, 2, , 20,000, 10,000, 16,000, 14,000, , 2, 10, 2, 2, 1, 1, , 10,000, 5,00, 8,000, 10,000, 1,00,000, 25,000, , LS, , 3,000, , 1, 30, 60, 60, 30, 30, , 80,000, , 2., 3., 4., 5., 6., 7., , Burette 50ml, Pipette 25ml, Beakers 100ml, Burette stand, Glazed tile, Conical flask 50ml (Titration flask), , 8., , Standard (Measuring) flask (to prepare standard, solution) 250ml/100ml, , 9., , Able’s Flash Point apparatus, , 2, , 10,000, , 10., , (1/10)°C thermometer, , 06, , 6,000, , 60, 30, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 154, , 3,000, 4,000, 4,000, 30,000, 1,000, 4,000, 6,000

Page 160 :
Sr., No., 11., , Candles, , 12., 13., 14., 15., , Crucible with lid, Muffle furnace, Decicators, Pair of tongue (small and big), , 16., , Chemicals, , Description, , -, , 17., , EDTA-1 kg, Eriochrome Black-T(solochrome black T)-200g, Buffer solution (NH3 - 2.5 ltr, NH4Cl – 1 kg), Zinc sulphate- 500g, H2SO4- 2.5 ltr, Phenolphthalein indicator (as per requirement), Methyl orange indicator (as per requirement), Charcoal (as per requirement), Kerosene- 1 ltr, , Miscellaneous, , Qty, 20, , Total Price, (Rs), 100, , 06, 1, 06, 24 (small), 2 (big), , 2,000, 18,000, 8,000, 2,000, , LS, , 20,000, , LS, , 2,000, , ENGINEERING DRAWING, 1., , Drawing Boards (700 x 500mm), , 60, , 25,000, , 2., , Draughtsman Tables, , 60, , 1,80,000, , 3., , Draughtsman Stools, , 60, , 40,000, , 4., , Computer Aided Drawing (CAD) Software, , 5., , Model of different wooder joints, , 1, , 1,000, , 6., , Model of different screw threads, , 1, , 1,000, , 7., , Model of various locking devices, , 1, , 1,000, , 8., , Model of various joints, , 1, , 1,000, , 9., , Cut section Model of various couplings, , 1, , 3,000, , 10., , Miscellaneous, , LS, , 5,000, , ELECTRICAL AND ELECTRONICS ENGINEERING LABORTORY, 1., Voltmeter, 5, 2., Ammeter, 5, 3., CRO, 1, 4., Wattmeter, 5, 5., Multimeter, 1, , 7,500, 10,000, 15,000, 10,000, 4,000, , 30, User, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 155, , 5,00,000

Page 161 :
Sr., No., 6., 7., 8., 9., 10., 11., 12., 13., , Description, Resistive load, Regulated supply, Signal generator, Rheostat, Lead acid battery, Cables, Coils, Lamp (as per requirements), Resistance, Inductor, Capacitor (as per requirements), , Qty, 1, 1, 1, 2, 1, LS, LS, , Total Price, (Rs), 4,000, 8,000, 5,000, 2,500, 4,000, 1,500, 1,500, , Miscellaneous/Electronics Components, LS, 2,500, BASICS OF IT LABORATORY/COMPUTER APPLICATIONS LABORATORY, 1., Computer System with latest configuration, 30, 8,00,000, 2., Printer (MFP), 1, 25,000, 3., Printer (Laser), 1, 35,000, 4., Plotter, 1, 75,000, 5., Digitiser, 1, 50,000, 6., Antivirus Software, LS, 10,000, 7., Internet Facility on Computers, LS, 2,00,000, 8., LCD Projector, 1, 35,000, 9., UPS, 60, 1,20,000, 10. Software (latest windows, latest MS Office), 1, 1,00,000, 11. Scanner, 1, 10,000, 12. Software MATLAB, 1, 2,00,000, 13. Miscellaneous, LS, 5,000, CARPENTRY SHOP, 1, Work benches fitted with carpenter vices, 2., Circular saw grinder, 3., Wood cutting band saw-vertical, 4., Bench grinder, 5., Drilling machine, 6., Wood turning lathe, 7., Wood Planner, 8., Tool accessories measuring and marking Instruments, 9., Band saw blade brazing unit, 10. Miscellaneous, , 5, 1, 1, 1, 1, 1, 1, 25, 1, , 20,000, 6,000, 10,000, 5,000, 8,000, 40,000, 20,000, 25,000, 10,000, , LS, , 1,500, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 156

Page 162 :
Sr., No., , Description, , Qty, , Total Price, (Rs), , PAINTING AND POLISHING SHOP, 1., , Spray gun with hose pipe, , 1, , 1,000, , 2., , Paint brushes, , 20, , 2,000, , 3., , Paint/Varnish, , LS, , 2,000, , 4., , Air Compressor with 2 hp motor, , 1 set, , 10,000, , 5., , Miscellaneous, , LS, , 2,000, , 20, , 20,000, , ELECTRICAL SHOP, Tool kit (Plier, Screw driver, Knife, Steel rule, hammer,, 1., scriber, pincer steel tape etc.), Fuses, Switches, Plugs, Sockets, Ceiling rose, Wires,, 2., cleats, Clamps, Test lamp, Tester.( as per requirement), Electric Iron, 3., , 8,000, 1, , 1,500, , 4., , Electric kettle, , 1, , 1,500, , 5., , Ceiling fan/table fan, , 1, , 2,500, , 6., , Desert cooler, , 1, , 5,000, , 7., , Lead acid battery, , 2, , 8,000, , 8., , Battery Charger, , 1, , 6,000, , 9., , Miscellaneous, , 3,000, , WELDING SHOP, 1., Electrical welding transformer set with accessories, 2., Gas Cutting Unit, 3., Work benches with vices, 4., Welding generator set, 5., Oxy acetylene welding set with accessories, 6., Acetylene generating set, 7., Electric welder tool kit, 8., Projection welding machine, 9., Brazing equipment with accessories, 10. Soldering irons, 11. Pedestal grinder, 12. Metal spraying gun, 13. Spot welder, 14. TIG welding set, 15. MIG welding set, 16. Welding Partition Screen, , 3, 1, 3, 1, 1, 1, 10, 1, 1, 3, 1, 1, 1, 1, 1, 5, , 30,000, 3,000, 5,000, 10,000, 7,000, 6,000, 10,000, 15,000, 10,000, 1,000, 10,000, 10,000, 25,000, 1,00,000, 1,00,000, 2,500, , 17., , LS, , 3,000, , Miscellaneous, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 157

Page 163 :
Sr., No., , Description, , Qty, , Total Price, (Rs), , FITTING AND PLUMBING SHOP, 1., Work benches with vices (4 vices on each bench), , 5, , 30,000, , 2., 3., 4., , 4, 5, 25, , 24,000, 20,000, 50,000, , 25, 25, 2, 4, 5, 5, 2 set, 1, LS, , 40,000, 25,000, 12,000, 1,000, 1,250, 600, 1,000, 5,000, 2,000, , LS, , 1,500, , 8, 5, LS, 1, 1, 1, 1 Each, , 3,000, 2,000, 8,00, 20,000, 20,000, 10,000, 1,000, , 4, LS, , 2,000, 5,00, , LS, , 1,000, , MASON SHOP, 1., Mason Trowel, , 10, , 1,000, , 2., , Concrete Finishing Trowel, , 10, , 1,000, , 3., , Gauging Trowel, , 10, , 1,000, , 4., , Margin Trowel, , 10, , 1,000, , 5., , Pointing Trowel, , 10, , 1,000, , 6., , Round Trowel, , 10, , 1,000, , 7., , Mason/Brick Hammer, , 10, 10, , 3,000, 3,000, , 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., , Marking tables with scribers, Surface plates, Accessories like calipers, V blocks, height, gauges steel, rules and scribers, Tool kits – taps, dies, drills, Tool kits – chiesels, hammers, files, hacksaw, Drilling machine, Pipe vice, Chain wrenches, Ring spanner set, Pipe die set 2”, Pipe bending device, Various plumbing fittings, , Miscellaneous, SHEET METAL SHOP, 1. Hammers, 2. Mallets (Hard & Soft), 3. Sheet and wire Ganges, 4. Shearing Machine, 5. Bar folding Machine, 6. Burring machine, 7. Various sheet (black plain, galvanized iron, corrugated,, Aluminium), 8. Hand Shears/Snippers, 9. Nuts, Bolts, Rivets, Screw, 10. Miscellaneous, , 8., , Comb hammer, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 158

Page 164 :
Sr., No., 9., 10., 11., 12., 13., 14., 15., 16., , Description, Blocking chisel, Plumb bob, Spirit level, Straight Edge, Jointer, Masonry Pan, Steel Measuring Tape, Miscellaneous (Bricks, Blocks, Stones, Sand, Cement), , MACHINE SHOP, 1., Centre lathes, 2., Grinder, 3., Universal milling machine, 4., Shaper, 5., Plainer, 6., Work bench, 7., Precision instruments, 8., Hand tools and accessories, 9., CNC trainer lathe, 10. Miscellaneous, , Qty, 10, , Total Price, (Rs), 1,000, , 10, , 500, , 10, , 1,000, , 10, , 1,000, , 10, , 1,000, , 10, , 1,500, , 10, , 500, , 10, , 3,000, , 10, 1, 1, 2, 2, 3, 1, 2, 1, , 6,00,000, 10,000, 1,25,000, 1,20,000, 1,20,000, 10,000, 10,000, 8,000, 4,00,000, , LS, , 5,000, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 159

Page 165 :
Sr., , Particulars, , Unit, , No., MECHANICAL OPERATIONS AND SOLID HANDLING/FLUID MECHANICS, LABORATORY, 1., Centrifuge, 01, 2., Ball Mill, 01, 3., Mixer – Liquid Liquid Mixer and Solid Liquid Mixer, 02, 4., Roller mill, 01, 5., Compressor, Wet Gas Meter, Blower, 01, 6., Jaw Crusher, 01, 7., Cyclone Separator, 01, 8., Plate and frame filter press, 01, 9., Sieve shaker, 01, 10. Bernoulli’s Theorem Apparatus, 01, 11. Vacuum pump, 01, 12. Particle settling in fluids (Drag coefficient), 01, 13. Determination of Friction loss through pipe, 01, 14. Weirs, V-notch, Rectangular Notch, 01, 15. Centrifugal pumps, reciprocating pump, 01, 16. Redwood Viscometer, 01, 17. Rotameter, Venturimeter, Orificemeter, pitot tube, 01, 18. Globe valve, check valves, Butterfly valve, Needle valve, 01, 19. Gate Valve, Diaphragm Valve, 01, 20. Reynolds number determination apparatus, 01, 21. Rotary Disc Filter, Vacuum Rotary Drum Filter, 01, HEAT AND MASS TRANSFER LABORATORY, 1., Equipment to measure thermal conductivity of metal rod., 2., Heat transfer through compound wall equipment., 3., Thermal conductivity (Insulating powder) Apparatus904., Forced convection apparatus, 5., Natural convection apparatus, 6., Open pen evaporator, 7., Drop and film wise condensation apparatus, 8., Parallel and counter flow apparatus for heat exchanger, 9., Shell and tube heat exchanger, 10. Double pipe heat exchanger for heat transfer coefficient, 11. Single effect evaporator, 12. Finned tube heat exchanger, 13 Batch Distillation Apparatus, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 160, , 01, 01, 01, 01, 01, 01, 01, 01, 01, 01, 01, 01

Page 166 :
Sr., , Particulars, , No., 14 Oven, 15 Liquid-Liquid Extractor Setup, 16 Packed Column, 17 Tray Dryer, 18 Bubble Cap Distillation Column, 19 Refractormeter, 20 Liquid Diffusion Apparatus, 21 Solid Diffusion Apparatus, 22 Wetted Wall Column Apparatus, 23 Cooling Tower, 24 Crystallizer, 25 Reverse Osmosis Set Up, ENVIRONMENT ENGINEERING LABORATORY, 1., pH Meter, , Unit, 01, 01, 01, 01, 01, 01, 01, 01, 01, 01, 01, 01, 01, , 2., , Turbidity Meter, , 01, , 3., , Oven with Temperature Controller and Forced Air Circulation, Type, , 01, , 4., , B.O.D. Incubator, , 01, , 5., , Water Analysis Kit, , 01, , 6., , High Volume Sampler, , 01, , 7., , Electrical Balance for weighing upto 1/10 of milligram, (capacity), PETROLEUM PROCESSING LABORATORY, 1., Cleave land flash and fire point apparatus, 2., ASTM D-92 open cup types with thermometers, 3., Cloud and pour point apparatus, 4., Redwood viscometer with stop watch, measuring flask,, thermometers, 5., Pensky –Martens flash point apparatus, 6., Smoke point apparatus, 7., Aniline point apparatus, 8., ASTM distillation of Petroleum product apparatus, CHEMICAL TECHNOLOGY LABORATORY, 1., Distillation Apparatus (Glass ) Sieve and Plate type, 2., Heating Mantle ( 2” – 3”), 3., Beakers (100 ml, 200 ml, 500 ml), 4., Round bottom flasks, 5., Raw Material (Coconut Oil, Mustard Oil, Phenol Formaldehyde,, NaOH, HCl, NaCl, Lead Chromate, Lead dichromate, Filter paper, APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 161, , 01, , 01, 01, 01, 01, 01, 01, 01, 01, 01, 03, 05 each, 05, As per need

Page 167 :
Sr., , Particulars, , Unit, , No., CHEMICAL REACTION ENGINEERING, 1, Batch Reactor, 2, Isothermal Plug Flow Reactor, 3, Isothermal Mixed Flow Reactor/Continuous Stirred Tank Reactor, 4, Fluidized Bed Reactor, 5, Refrigerator, 6, PFR and CSTR in series, PROCESS CONTROL, 1, Apparatus for celebration of pressure gauge, 2, Bimetallic Thermometer, 3, Energy Meter, 4, Watt Meter, 5, Manometers, 6, Flapper nozzle system apparatus, 7, On-off Controller, 8, Thermopiles/Thermo couple, 9, Resistance thermometer, 10, Strip chart recorder, 11, Circular chart recorder, 12, Pneumatic value, 13, Set up for study response of two tank in non-introductory and, interacting system, 14, P controller, PD controller PID controller, ENERGY CONSERVATION LABORATORY, 1, Clamp meter, , 01, 01, 01, 01, 01, 01, , 01, 01, , 01, 01, 01, 01, 01, 01, 01, 01, 01 each, 02, , 2, , Multimeter, , 02, , 3, , 01, , 5, , Power Analyser, Different types of lamps (LS),  60 W lamp, 230 V , 100 V,  200 W lamp,  500 W lamp,  100 W lamp, 110 V, 150 V, Lux meter, , 6, , Standard window A.C., , 01, , 7, , Anemometer, , 02, , 8, , Thermometer, , 03, , 4, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 162, , 10, , 02

Page 168 :
Sr., Particulars, , No., , Unit, , 9, , Flow meter, , 10, , Pumping set with at least two pumps of different capacity., , 1 set, , 11, , Pressure gauge fitted on discharge lines, , 1 set, , 12, , Variable Frequency Drive, , 02, , 13, , A small compressor with a small network of pipe line fitted, with suitable pipeline, pressure gauge, safety valve and loading, / unloading pressure switch., , 1, , 14, , Stop watch, , 2, , 15, , Small blower (1.5 kW motor) with inlet and outlet ducts of, approximately one meter length on both sides, , 1, , POLLUTION CONTROL AND INDUSTRIAL SAFETY, 1, BOD incubator (5 C- 50C) with digital temperature indicator, 2, COD Heater, 3, Refrigerator, 280 ltrs., 4, Laboratory oven 2’x2’x2’, 5, Turbidity meter (0-4000 NTU), 6, TDS portable meter, 7, Electronic balance (0.001 grams), 8, Beakers, 9, Conical flask, round bottom flasks, 10 Condenser, reflux condenser, 11 BOD bottles, rubber pipe, burette, pipette etc., FERTILIZER TECHNOLOGY, 1, Carbon dioxide generator, 2, Combustion assembly, 3, K-Jeldahl flask (300.CC), connecting kjeldal flask, Distillation, unit, receiver, Heater connecting pipings and suitable holding, fixtures, 4, Electric Oven, 5, Electronics Balance 200-300 gm, 0.001 gm, back light LED with, glass enclosure and lab weight for calibration, 6, Reflux Condenser with k-jacketed flask & fixture, 7, Round Bottom Flask with Joint B-24, 500ml, 8, CNH Analyzer, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 163, , 02, , 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, LS, 1, 1, 6, 2, 1, 1, 1, 1

Page 169 :
EQUIPMENT'S REQUIRED FOR PAINT TECHNOLOGY, Sr, NO., Description, Qty., PAINT AND POLYMER LABROTORY, 1, High Speed ATTRITOR, 2, Lab ball mill/bead mill(1 Litre)with motar, 3, Pestle and mortor, 4, Lab stirrer ( High speed), 5, Digital electronic balance, DRYING OIL SOLVENT AND ADDITIVE LABROTARY, 1, Spectrophotometer, 2, Specific gravity bottle, 3, Refractometers, 4, Burrete, 5, Pipette, 6, Conical flask, 7, Gloss plate 4 cm Diameter, 8, Hot Oven, PIGMENT AND EXTENDER LABORATORY, 1, Burrete 50ml, 2, Pipette 25ml, 3, Digital electronic balance, 4, Spatula steel, 5, Gloss plate 6*6 inch, 6, Iron plate 6*6 inch, 7, Filter paper, 8, Condenser with Tube and Heating Material, RESIN AND PAINT MEDIA LABORATORY, 1, Test tube stand, 2, Funnel stand, 3, Burrete stand, 4, Pippete stand, 5, Reagents Bottle 250ml,500ml,1000ml, 6, Measuring flask 250ml with Stopper, Measuring Cylinder for Various Size ( 250ml,500ml,, 7, 1000ml), 8, Sprit lamp, 9, 10, 11, 12, 13, , Brush (small) for cleaning various type of material, PH meter, Hot Plate 7-1/22'' ,3'' Diameter, Stirrer with speed Regulator, Three neck flask, , Total price in Approx .Rs., , 2, 1, 2, 2, 2, , 5000, 5000, 100, 3000, 3000, , 2, 2, 2, 2, 2, 3, 3, 1, , 10000, 200, 5000, 200, 200, 200, 100, 10000, , 2, 2, 1, 5, 6, 6, 10, 2, , 200/Piece, 200/Piece, 5000, 200, 200, 200, 100, 3000, , 6, 6, 3, 3, 10, 5, , 100, 100, 200, 200, 300, 300, , 5, 6, , 300, 500, , 6, 6, 3, 3, 3, , 500, 100, 5000, 5000, 500, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 164

Page 170 :
14, Stirrer rod, 3, 100, 15, Stirrer blade ( Teflon), 3, 100, COATING PROPERTIES EVALUATION AND QUALITY CONTROL LABORATORY, 1, Colorimeter, 1, 5000, 2, Weight per litre pot, 2, 500, 3, Hegman gauge, 2, 2000, 4, Viscometer, 2, 3000, 5, Gloss Plate, 3, 2000, 6, B.K drying recorder, 2, 2000, 7, DFT gauge, 2, 5000, 8, Cylindrical mandrel, 2, 5000, 9, Conical mandrel, 2, 5000, 10, 1 H,2 BH pencil, 2, 300, 11, Impact tester, 1, 5000, 12, Glossometer, 1, 5000, 13, Humidity Chamber, 1, 5000, 14, Salt pray Chamber, 1, 5000, 15, Ford Cup No.4 with spatula, 1, 5000, 16, Checkers board, 1, 5000, 17, Cross cut adhesion tester, 1, 5000, 18, Scratch hardness tester, 1, 5000, SURFACE PREPARATION AND PAINT APPLICATION LABORATORY, 1, Spray booth, 1, 5000, 2, Spray gun, 1, 2000, 3, Metal panel, 1, 2000, 4, Cylindrical flask of 1 lit ., 10, 2000, ARCHITECTURAL AND INDUSTRIAL COATINGS LABORATORY, 1, High speed stirrer, 12, 1000, 2, China clay pot and stirrer, 11, 1000, 3, Lab ball mill/bead ball mill with motor, 1, 5000, 4, Hot Plate, 1, 5000, 5, Iron Rod, 1, 2000, 6, Brush for Mixing and cleaning, 1, 3000, Lab table 2m*1.2m*1m height with central sink and, cup boards teak wood with drawers and two built in, 7, almirah on each side with reagents rack , better tile top, 1, 10000, 8, Distilled water unit ( electrical), 1, 2000, 9, Jar 20 lit . For keeping distilled water, 1, 2000, 10, Exhaust fan 18'', 1, 2000, 11, Autometic Pigment Muller, 8, 5000, NOTE:, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 165

Page 171 :
In addition to the above, laboratories in respect of physics, chemistry, Computer Centre etc will, be required for effective implementation of the course. Provision for photo copiers, PC, facilities along with LCD Projection System etc. has also to be made., (C), , Furniture Requirement, , Norms and standards laid down by AICTE be followed for working out furniture requirement, for this course., 10.2, , Human Resources Development:, , Weekly work schedule, annual work schedule, student teacher ratio for various group and, class size, staffing pattern, work load norms, qualifications, experience and job description of, teaching staff workshop staff and other administrative and supporting staff be worked out as, per norms and standards laid down by the AICTE, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 166

Page 172 :
11., , EVALUATION STRATEGY, , 11.1, , INTRODUCTION, , Evaluation plays an important role in the teaching-learning process. The major objective, of any teaching-learning endeavor is to ensure the quality of the product which can be, assessed through learner’s evaluation., The purpose of student evaluation is to determine the extent to which the general and, the specific objectives of curriculum have been achieved. Student evaluation is also, important from the point of view of ascertaining the quality of instructional processes, and to get feedback for curriculum improvement. It helps the teachers in determining, the level of appropriateness of teaching experiences provided to learners to meet their, individual and professional needs. Evaluation also helps in diagnosing learning, difficulties of the students. Evaluation is of two types: Formative and Summative, (Internal and External Evaluation), , Formative Evaluation, It is an on-going evaluation process. Its purpose is to provide continuous and, comprehensive feedback to students and teachers concerning teaching-learning process. It, provides corrective steps to be taken to account for curricular as well as co-curricular, aspects., Summative Evaluation, It is carried out at the end of a unit of instruction like topic, subject, semester or year., The main purpose of summative evaluation is to measure achievement for assigning, course grades, certification of students and ascertaining accountability of instructional, process. The student evaluation has to be done in a comprehensive and systematic, manner since any mistake or lacuna is likely to affect the future of students., In the present educational scenario in India, where summative evaluation plays an, important role in educational process, there is a need to improve the standard of, summative evaluation with a view to bring validity and reliability in the end-term, examination system for achieving objectivity and efficiency in evaluation., 11.2, , STUDENTS’ EVALUATION AREAS, The student evaluation is carried out for the following areas:, A., , Theory, Practical Work (Laboratory, Workshop, Field Exercises), Project Work, Professional Industrial Training, Theory, , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 167

Page 173 :
Evaluation in theory aims at assessing students’ understanding of concepts,, principles and procedures related to a course/subject, and their ability to apply, learnt principles and solve problems. The formative evaluation for theory, subjects may be caused through sessional /class-tests, home-assignments,, tutorial-work, seminars, and group discussions etc. For end-term evaluation of, theory, the question paper may comprise of three sections., Section-I, It should contain objective type items e.g. multiple choice, matching and completion type., Total weightage to Section-1 should be of the order of 20 percent of the total marks and no, choice should be given in this section. The objective type items should be used to evaluate, students’ performance in knowledge, comprehension and at the most application domains, only., Section-II, It should contain short answer/completion items. The weightage to this section, should be of the order of 40 percent of the total marks. Again, no choice should, be given in section-II, Section-III, It may contain two to three essay type questions. Total weightage to this section, should be of the order of 40 percent of the total marks. Some built-in, internal, choice of about 50 percent of the questions set, can be given in this section, Table II : Suggested Weightage to be given to different ability levels, Abilities, Knowledge, Comprehension, Application, Higher than application i.e. Analysis,, Synthesis and Evaluation, B., , Weightage to be assigned, 10-30 percent, 40-60 percent, 20-30 percent, Upto 10 percent, , Practical Work, Evaluation of students performance in practical work (Laboratory experiments,, Workshop practicals/field exercises) aims at assessing students ability to apply, or practice learnt concepts, principles and procedures, manipulative skills,, ability to observe and record, ability to interpret and draw conclusions and work, related attitudes. Formative and summative evaluation may comprise of, weightages to performance on task, quality of product, general behaviour and it, should be followed by viva-voce., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 168

Page 174 :
C., , Project Work, The purpose of evaluation of project work is to assess students ability to apply,, in an integrated manner, learnt knowledge and skills in solving real life, problems, manipulative skills, ability to observe, record, creativity and, communication skills. The formative and summative evaluation may comprise, of weightage to nature of project, quality of product, quality of report and, quality of presentation followed by viva-voce., , D., , Professional Industrial Training, Evaluation of professional industrial training report and viva-voce/ presentation, aims at assessing students’ understanding of materials, industrial processes,, practices in the industry/field and their ability to engage in activities related to, problem-solving in industrial setting as well as understanding of application of, learnt knowledge and skills in real life situation. The formative and summative, evaluation may comprise of weightages to performance in testing, general, behaviour, quality of report and presentation during viva-voce., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 169

Page 175 :
12., , RECOMMENDATIONS FOR EFFECTIVE CURRICULUM, IMPLEMENTATION, , This curriculum document is a Plan of Action and has been prepared based on exhaustive, exercise of curriculum planning and design. The representative sample comprising selected, senior personnel (lecturers and HODs) from various institutions and experts from industry/field, have been involved in curriculum design process., The document so prepared is now ready for its implementation. It is the faculty of polytechnics, who have to play a vital role in planning instructional experiences for the courses in four, different environments viz. class-room, laboratory, library and field and execute them in right, perspective. It is emphasized that a proper mix of different teaching methods in all these places, of instruction only can bring the changes in stipulated students behaviour as in the curriculum, document. It is important for the teachers to understand curriculum document holistically and, further be aware of intricacies of teaching-learning process (T-L) for achieving curriculum, objectives. Given below are certain suggestions which may help the teachers in planning and, designing learning experiences effectively. These are indicative in nature and teachers using, their creativity can further develop/refine them. The designers of the programme suggest every, teacher to read them carefully, comprehend and start using them., (A), , Broad Suggestions:, , 1., , Curriculum implementation takes place at programme, course and class-room level, respectively and synchronization among them is required for its success. The first step, towards achieving synchronization is to read curriculum document holistically, and understand its rationale and philosophy., , 2., , An academic plan needs to be prepared and made available to all polytechnics well in, advance. The Principals have a great role to play in its dissemination and, percolation, upto grass-root level. Polytechnics, in turn are supposed to prepare institutional, academic plan., , 3., , HOD of every Programme Department along with HODs and incharges of other, departments are required to prepare academic plan at department level referring to, institutional academic plan., , 4., , All lecturers/Senior lecturers are required to prepare course level and class level, lesson plans referring departmental academic plan., , (B), , Course Level Suggestions, Teachers are educational managers at class room level and their success in achieving, course level objectives lies in using course plan and their judicious execution which is, very important for the success of programme by achieving its objectives., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 170

Page 176 :
Polytechnic teachers are required to plan various instructional experiences viz. theory, lecture, expert lectures, lab/workshop practicals, guided library exercises, field visits,, study tours, camps etc. In addition, they have to carry out progressive assessment of, theory, assignments, library, practicals and field experiences. Teachers are also, required to do all these activities within a stipulated period of time. It is essential for, them to use the given time judiciously by planning all above activities properly and, ensure execution of the plan effectively., Following is the gist of suggestions for subject teachers to carry out T-L process, effectively:, 1., , Teachers are required to prepare a course plan, taking into account departmental, academic plan, number of weeks available and courses to be taught., , 2., , Teachers are required to prepare lesson plan for every theory class. This plan may, comprise of contents to be covered, learning material for execution of a lesson plan., They may follow steps for preparing lesson plan e.g. drawing attention, state, instructional objectives, help in recalling pre-requisite knowledge, deliver planned, subject content, check desired learning outcomes and reinforce learning etc., , 3., , Teachers are required to plan for expert lectures from field/industry. Necessary steps, are to plan in advance, identify field experts, make correspondence to invite them, take, necessary budgetary approval etc., , 4., , Teachers are required to plan for guided library exercises by identification of course, specific experience requirement, setting time, assessment, etc. The assignments and, seminars can be thought of as terminal outcome of library experiences., , 5., , Concept and content based field visits may be planned and executed for such content, of course which is abstract in nature and no other requisite resources are readily, available in institute to impart them effectively., , 6., , There is a dire need for planning practical experiences in right perspective. These slots, in a course are the avenues to use problem based learning/activity learning/ experiential, learning approach effectively. The development of lab instruction sheets for the course, is a good beginning to provide lab experiences effectively., , 7., , Planning of progressive assessment encompasses periodical assessment in a, semester, preparation of proper quality question paper, assessment of answer, sheets immediately and giving constructive feed back to every student, , 8., , The student centred activities may be used to develop generic skills like task, management, problem solving, managing self, collaborating with others etc., , 9., , Where ever possible, it is essential to use activity based learning rather than, relying on delivery based conventional teaching all the time., , 10., , Teachers may take initiative in establishing liaison with industries and field, organizations for imparting field experiences to their students., APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 171

Page 177 :
11., , Students be made aware about issues related to ecology and environment, safety,, concern for wastage of energy and other resources etc., , 12., , Students may be given relevant and well thought out project assignments, which are, purposeful and develop practical skills. This will help students in developing creativity, and confidence for their gainful employment., , 13., , A Project bank may be developed by the concerned department of the polytechnics in, consultation with related Industry, research institutes and other relevant field, organizations in the state., , APPROVED IN CDC COMMITTEE MEETING OF BTE,UP,LUCKNOW DATED :26-09-2021, 172