Page 1 :
1|Page, , Science Class 9 Notes – Sound, 1. Sound : Sound is a form of energy which produces a sensation of hearing in our ears., 2. Source of sound and its propagation : A source of vibration motion of an object is, normally a source of sound., 3. Characteristics of the medium required for the propagation of sound:, (i) Medium must be elastic so that the medium particles have the tendency to return back to, their original positions after the displacement., (ii) Medium must have the inertia so that its particles have the capacity to store the energy., The frictional resistance of the medium should be negligible to minimise the loss of energy in, propagation., 4. Types of waves, (i) Mechanical waves : A mechanical wave is a periodic disturbance which requires a material, medium for its propagation. On the basis of motion of particles the mechanical waves are, classified into two parts., (a) Transverse wave, (b) Longitudinal wave, (a) Transverse wave : When the particles of the medium vibrate in a direction perpendicular, to the direction of propagation of the wave, the wave is known as the transverse wave. For, example, waves produced in a stretched string., (b) Longitudinal wave : When the particles of the medium vibrate along the direction of, propagation of the wave then the wave is known as the longitudinal wave. For example sound, wave in air., (ii) Electromagnetic waves : The waves which do not require medium for propagation are, called electromagnetic waves these waves can travel through vacuum also. For example, light, waves, X-rays., 5. Characteristics of a sound wave, Frequency : The number of vibrations per second is called frequency., The unit of frequency is hertz, (ii) Amplitude: The maximum displacement of each particle from its mean position is called, amplitude., www.ncerthelp.com (Visit for all ncert solutions in text and videos, CBSE syllabus, note and many more)
Page 2 :
2|Page, , The S.I. unit of amplitude is metre (m)., (iii) Time period: The time taken to complete one vibration is called time period., Frequency= 1/(Time period) or v = 1/T, (iv) Wavelength: The distance between two nearest (adjacent) crests or troughs of a wave is, called its wavelength., (v) Velocity of wave: The distance travelled by a wave in one second is called velocity of the, wave (or speed of the wave). The S.I. unit for the velocity of a wave is metres per second (m/s, or ms-1)., (vi) Pitch : Pitch is the sensation (brain interpretation) of the frequency of an emitted sound, and is the characteristic which distinguishes a shrill (or sharp) sound from a grave (or flat), sound., (vii) Loudness : It is a measure of the sound energy reaching the ear per second., 6. Reflection of sound : When sound waves strike a surface, they return back into the same, medium. This phenomenon is called reflection., 7. Laws of reflection : Angle of incidence is equal the angle of reflection., The incident wave, the reflected wave and the normal all lie in the same plane., 8. Echo : Phenomenon of hearing back our own sound is called an echo. It is due to successive, reflection from the surfaces obstacles of large size., 9. Relation between speed of sound, time of hearing echo and distance of reflection body, : If t is the time at which an echo is heard, d is the distance between the source of sound and the, reflecting body and v is the speed of sound. The total distance travelled by the sound is 2d., speed of sound, v = 2d/t or d = vt/2, 10. Conditions for the formation of Echoes, (i) The minimum distance between the source of sound and the reflecting body should be 17.2, metres., (ii) The wavelength of sound should be less than the height of the reflecting body., (iii) The intensity of sound should be sufficient so that it can be heard after reflection., 11. Reverberation : Persistence of sound after its production is stopped, is called, reverberation. A short reverberation is desirable in a concert hall (where music is being played), , www.ncerthelp.com (Visit for all ncert solutions in text and videos, CBSE syllabus, note and many more)
Page 3 :
3|Page, , because it gives ‘life’ to sound. Too much reverberation confuses the programmers and must be, reduced to reduce reverberation., 12. Range of Hearing : The audible range of sound for human beings extends from about 20, Hz to 20,000 Hz (one Hz = one cycle/s). Sounds of frequencies below 20 Hz are called, infrasonic sound or infrasound. Frequencies higher than 20 kHz are called ultrasonic sound or, ultra sound. Ultrasound is produced by dolphins., 13. Applications of ultrasound : The ultrasound is commonly used for medical diagnosis, and therapy, and also as a surgical tool. It is also used in a wide variety of industrial, applications and processes. Some creatures use ultrasound for information exchange and for the, detection and location of objects. Also some bats and, porpoises are found to use ultrasound for navi gation and to locate food in darkness or at, a place where there is inadequate light for vision (method of search is called echolocation)., 14. Sonar : SONAR means Sound Navigation Rang-ing. In this sound waves (ultrasonic) are, used [microwaves are absorbed by water)]. Sound waves are emitted by a source. These waves, travel in water with velocity v. The waves re-flected by targets (like submarine bottom sea) are, detected., Uses, (i) The SONAR system is used for detecting the presence of unseen underwater objects, such as, a submerged submarine, a sunken ship, sea rock or a hidden iceberg, and locating them, accurately., (ii) The principle of SONAR is also used in industry of detection of flaws in metal blocks or, sheets without damaging them., 15. Human ear : It is a highly sensitive part of the human body which enables us to hear a, sound. It converts the pressure variations in air with audiable frequencies into electric signals, which travel to the brain via the auditory nerve., The human ear has three main parts. Their auditory functions are as follows:, (i) Outer ear : The outer ear is called `pinna’. It collects the sound from the suri-ounding. The, collected sound passes through the auditory canal. At the end of the auditory canal there is a, thin membrane called the ear drum or tympanic membrane. When compression of the medium, produced due to vibration of the object reaches the ear drum, the pressure on the outside of the, membrane increases and forces the eardrum inward. Similarly, the eardrum moves outward, when a rarefaction reaches. In this way the ear drum vibrates., (ii) Middle ear: The vibrations are amplified several times by three bones (the hammer, anvil, and stirrup) in the middle ear which act as levers. The middle ear transmits the amplified, pressure variations received from the sound wave to the inner ear., www.ncerthelp.com (Visit for all ncert solutions in text and videos, CBSE syllabus, note and many more)
Page 4 :
4|Page, , (iii) Inner ear: In the inner ear, the pressure variations are turned into electrical signals by the, cochlea. These electrical signals are sent to the brain via the auditory nerve, and the brain, interprets them as sound., , www.ncerthelp.com (Visit for all ncert solutions in text and videos, CBSE syllabus, note and many more)
