Page 1 :
CHAPTER ONE, , PHYSICAL WORLD, , 1.1 WHAT IS PHYSICS ?, , 1.1 What is physics ?, 1.2 Scope and excitement of, physics, 1.3 Physics, technology and, society, 1.4 Fundamental forces in, nature, 1.5 Nature of physical laws, Summary, Exercises, , Humans have always been curious about the world around, them. The night sky with its bright celestial objects has, fascinated humans since time immemorial. The regular, repetitions of the day and night, the annual cycle of seasons,, the eclipses, the tides, the volcanoes, the rainbow have always, been a source of wonder. The world has an astonishing variety, of materials and a bewildering diversity of life and behaviour., The inquiring and imaginative human mind has responded, to the wonder and awe of nature in different ways. One kind, of response from the earliest times has been to observe the, physical environment carefully, look for any meaningful, patterns and relations in natural phenomena, and build and, use new tools to interact with nature. This human endeavour, led, in course of time, to modern science and technology., The word Science originates from the Latin verb Scientia, meaning ‘to know’. The Sanskrit word Vijnan and the Arabic, word Ilm convey similar meaning, namely ‘knowledge’., Science, in a broad sense, is as old as human species. The, early civilisations of Egypt, India, China, Greece, Mesopotamia, and many others made vital contributions to its progress., From the sixteenth century onwards, great strides were made, in science in Europe. By the middle of the twentieth century,, science had become a truly international enterprise, with, many cultures and countries contributing to its rapid growth., What is Science and what is the so-called Scientific, Method ? Science is a systematic attempt to understand, natural phenomena in as much detail and depth as possible,, and use the knowledge so gained to predict, modify and, control phenomena. Science is exploring, experimenting and, predicting from what we see around us. The curiosity to learn, about the world, unravelling the secrets of nature is the first, step towards the discovery of science. The scientific method, involves several interconnected steps : Systematic, observations, controlled experiments, qualitative and, , 2018-19

Page 2 :
2, , PHYSICS, , quantitative reasoning, mathematical, modelling, prediction and verification or, falsification of theories. Speculation and, conjecture also have a place in science; but, ultimately, a scientific theory, to be acceptable,, must be verified by relevant observations or, experiments. There is much philosophical, debate about the nature and method of science, that we need not discuss here., The interplay of theory and observation (or, experiment) is basic to the progress of science., Science is ever dynamic. There is no ‘final’, theory in science and no unquestioned, authority among scientists. As observations, improve in detail and precision or experiments, yield new results, theories must account for, them, if necessary, by introducing modifications., Sometimes the modifications may not be drastic, and may lie within the framework of existing, theory. For example, when Johannes Kepler, (1571-1630) examined the extensive data on, planetary motion collected by Tycho Brahe, (1546-1601), the planetary circular orbits in, heliocentric theory (sun at the centre of the, solar system) imagined by Nicolas Copernicus, (1473–1543) had to be replaced by elliptical, orbits to fit the data better. Occasionally,, however, the existing theory is simply unable, to explain new observations. This causes a, major upheaval in science. In the beginning of, the twentieth century, it was realised that, Newtonian mechanics, till then a very, successful theory, could not explain some of the, most basic features of atomic phenomena., Similarly, the then accepted wave picture of light, failed to explain the photoelectric effect properly., This led to the development of a radically new, theory (Quantum Mechanics) to deal with atomic, and molecular phenomena., Just as a new experiment may suggest an, alternative theoretical model, a theoretical, advance may suggest what to look for in some, experiments. The result of experiment of, scattering of alpha particles by gold foil, in 1911, by Ernest Rutherford (1871–1937) established, the nuclear model of the atom, which then, became the basis of the quantum theory of, hydrogen atom given in 1913 by Niels Bohr, (1885–1962). On the other hand, the concept of, antiparticle was first introduced theoretically by, Paul Dirac (1902–1984) in 1930 and confirmed, two years later by the experimental discovery of, positron (antielectron) by Carl Anderson., , 2018-19, , Physics is a basic discipline in the category, of Natural Sciences, which also includes other, disciplines like Chemistry and Biology. The word, Physics comes from a Greek word meaning, nature. Its Sanskrit equivalent is Bhautiki that, is used to refer to the study of the physical world., A precise definition of this discipline is neither, possible nor necessary. We can broadly describe, physics as a study of the basic laws of nature, and their manifestation in different natural, phenomena. The scope of physics is described, briefly in the next section. Here we remark on, two principal thrusts in physics : unification, and reduction., In Physics, we attempt to explain diverse, physical phenomena in terms of a few concepts, and laws. The effort is to see the physical world, as manifestation of some universal laws in, different domains and conditions. For example,, the same law of gravitation (given by Newton), describes the fall of an apple to the ground, the, motion of the moon around the earth and the, motion of planets around the sun. Similarly, the, basic laws of electromagnetism (Maxwell’s, equations) govern all electric and magnetic, phenomena. The attempts to unify fundamental, forces of nature (section 1.4) reflect this same, quest for unification., A related effort is to derive the properties of a, bigger, more complex, system from the properties, and interactions of its constituent simpler parts., This approach is called reductionism and is, at the heart of physics. For example, the subject, of thermodynamics, developed in the nineteenth, century, deals with bulk systems in terms of, macroscopic quantities such as temperature,, internal energy, entropy, etc. Subsequently, the, subjects of kinetic theory and statistical, mechanics interpreted these quantities in terms, of the properties of the molecular constituents, of the bulk system. In particular, the, temperature was seen to be related to the average, kinetic energy of molecules of the system., 1.2 SCOPE AND EXCITEMENT OF PHYSICS, We can get some idea of the scope of physics by, looking at its various sub-disciplines. Basically,, there are two domains of interest : macroscopic, and microscopic. The macroscopic domain, includes phenomena at the laboratory, terrestrial, and astronomical scales. The microscopic domain, includes atomic, molecular and nuclear

Page 3 :
PHYSICAL WORLD, , phenomena*. Classical Physics deals mainly, with macroscopic phenomena and includes, subjects like Mechanics, Electrodynamics,, Optics and Thermodynamics. Mechanics, founded on Newton’s laws of motion and the law, of gravitation is concerned with the motion (or, equilibrium) of particles, rigid and deformable, bodies, and general systems of particles. The, propulsion of a rocket by a jet of ejecting gases,, propagation of water waves or sound waves in, air, the equilibrium of a bent rod under a load,, etc., are problems of mechanics. Electrodynamics, deals with electric and magnetic phenomena, associated with charged and magnetic bodies., Its basic laws were given by Coulomb, Oersted,, , Fig. 1.1, , chemical process, etc., are problems of interest, in thermodynamics., The microscopic domain of physics deals with, the constitution and structure of matter at the, minute scales of atoms and nuclei (and even, lower scales of length) and their interaction with, different probes such as electrons, photons and, other elementary particles. Classical physics is, inadequate to handle this domain and Quantum, Theory is currently accepted as the proper, framework for explaining microscopic, phenomena. Overall, the edifice of physics is, beautiful and imposing and you will appreciate, it more as you pursue the subject., , Theory and experiment go hand in hand in physics and help each other’s progress. The alpha scattering, experiments of Rutherford gave the nuclear model of the atom., , Ampere and Faraday, and encapsulated by, Maxwell in his famous set of equations. The, motion of a current-carrying conductor in a, magnetic field, the response of a circuit to an ac, voltage (signal), the working of an antenna, the, propagation of radio waves in the ionosphere, etc.,, are problems of electrodynamics. Optics deals, with the phenomena involving light. The working, of telescopes and microscopes, colours exhibited, by thin films, etc., are topics in optics., Thermodynamics, in contrast to mechanics, does, not deal with the motion of bodies as a whole., Rather, it deals with systems in macroscopic, equilibrium and is concerned with changes in, internal energy, temperature, entropy, etc., of the, system through external work and transfer of, heat. The efficiency of heat engines and, refrigerators, the direction of a physical or, , *, , 3, , You can now see that the scope of physics is, truly vast. It covers a tremendous range of, magnitude of physical quantities like length,, mass, time, energy, etc. At one end, it studies, phenomena at the very small scale of length, -14, (10 m or even less) involving electrons, protons,, etc.; at the other end, it deals with astronomical, phenomena at the scale of galaxies or even the, entire universe whose extent is of the order of, 26, 10 m. The two length scales differ by a factor of, 40, 10 or even more. The range of time scales can, be obtained by dividing the length scales by the, –22, speed of light : 10 s to 1018 s. The range of, masses goes from, say, 10–30 kg (mass of an, 55, electron) to 10 kg (mass of known observable, universe). Terrestrial phenomena lie somewhere, in the middle of this range., , Recently, the domain intermediate between the macroscopic and the microscopic (the so-called mesoscopic, physics), dealing with a few tens or hundreds of atoms, has emerged as an exciting field of research., , 2018-19

Page 4 :
4, , PHYSICS, , Physics is exciting in many ways. To some people, the excitement comes from the elegance and, universality of its basic theories, from the fact that, a few basic concepts and laws can explain, phenomena covering a large range of magnitude, of physical quantities. To some others, the challenge, in carrying out imaginative new experiments to, unlock the secrets of nature, to verify or refute, theories, is thrilling. Applied physics is equally, demanding. Application and exploitation of, physical laws to make useful devices is the most, interesting and exciting part and requires great, ingenuity and persistence of effort., What lies behind the phenomenal progress, of physics in the last few centuries? Great, progress usually accompanies changes in our, basic perceptions. First, it was realised that for, scientific progress, only qualitative thinking,, though no doubt important, is not enough., Quantitative measurement is central to the, growth of science, especially physics, because, the laws of nature happen to be expressible in, precise mathematical equations. The second, most important insight was that the basic laws, of physics are universal — the same laws apply, in widely different contexts. Lastly, the strategy, of approximation turned out to be very, successful. Most observed phenomena in daily, life are rather complicated manifestations of the, basic laws. Scientists recognised the importance, of extracting the essential features of a, phenomenon from its less significant aspects., It is not practical to take into account all the, complexities of a phenomenon in one go. A good, strategy is to focus first on the essential features,, discover the basic principles and then introduce, corrections to build a more refined theory of the, phenomenon. For example, a stone and a feather, dropped from the same height do not reach the, ground at the same time. The reason is that the, essential aspect of the phenomenon, namely free, fall under gravity, is complicated by the, presence of air resistance. To get the law of free, fall under gravity, it is better to create a, situation wherein the air resistance is, negligible. We can, for example, let the stone and, the feather fall through a long evacuated tube., In that case, the two objects will fall almost at, the same rate, giving the basic law that, acceleration due to gravity is independent of the, mass of the object. With the basic law thus, found, we can go back to the feather, introduce, corrections due to air resistance, modify the, existing theory and try to build a more realistic, , 2018-19, , Hypothesis, axioms and models, One should not think that everything can be proved, with physics and mathematics. All physics, and also, mathematics, is based on assumptions, each of, which is variously called a hypothesis or axiom or, postulate, etc., For example, the universal law of gravitation, proposed by Newton is an assumption or hypothesis,, which he proposed out of his ingenuity. Before him,, there were several observations, experiments and, data, on the motion of planets around the sun,, motion of the moon around the earth, pendulums,, bodies falling towards the earth etc. Each of these, required a separate explanation, which was more, or less qualitative. What the universal law of, gravitation says is that, if we assume that any two, bodies in the universe attract each other with a, force proportional to the product of their masses, and inversely proportional to the square of the, distance between them, then we can explain all, these observations in one stroke. It not only explains, these phenomena, it also allows us to predict the, results of future experiments., A hypothesis is a supposition without assuming, that it is true. It would not be fair to ask anybody, to prove the universal law of gravitation, because, it cannot be proved. It can be verified and, substantiated by experiments and observations., An axiom is a self-evident truth while a model, is a theory proposed to explain observed, phenomena. But you need not worry at this stage, about the nuances in using these words. For, example, next year you will learn about Bohr’s model, of hydrogen atom, in which Bohr assumed that an, electron in the hydrogen atom follows certain rules, (postutates). Why did he do that? There was a large, amount of spectroscopic data before him which no, other theory could explain. So Bohr said that if we, assume that an atom behaves in such a manner,, we can explain all these things at once., Einstein’s special theory of relativity is also, based on two postulates, the constancy of the speed, of electromagnetic radiation and the validity of, physical laws in all inertial frame of reference. It, would not be wise to ask somebody to prove that, the speed of light in vacuum is constant,, independent of the source or observer., In mathematics too, we need axioms and, hypotheses at every stage. Euclid’s statement that, parallel lines never meet, is a hypothesis. This means, that if we assume this statement, we can explain, several properties of straight lines and two or three, dimensional figures made out of them. But if you, don’t assume it, you are free to use a different axiom, and get a new geometry, as has indeed happened in, the past few centuries and decades.

Page 5 :
PHYSICAL WORLD, , 5, , A most significant area to which physics has, and will contribute is the development of, alternative energy resources. The fossil fuels of, the planet are dwindling fast and there is an, urgent need to discover new and affordable, sources of energy. Considerable progress has, already been made in this direction (for, example, in conversion of solar energy,, geothermal energy, etc., into electricity), but, much more is still to be accomplished., Table1.1 lists some of the great physicists,, their major contribution and the country of, origin. You will appreciate from this table the, multi-cultural, international character of the, scientific endeavour. Table 1.2 lists some, important technologies and the principles of, physics they are based on. Obviously, these, tables are not exhaustive. We urge you to try to, add many names and items to these tables with, the help of your teachers, good books and, websites on science. You will find that this, exercise is very educative and also great fun., And, assuredly, it will never end. The progress, of science is unstoppable!, Physics is the study of nature and natural, phenomena. Physicists try to discover the rules, that are operating in nature, on the basis of, observations, experimentation and analysis., Physics deals with certain basic rules/laws, governing the natural world. What is the nature, , theory of objects falling to the earth under, gravity., 1.3 PHYSICS, TECHNOLOGY AND SOCIETY, The connection between physics, technology, and society can be seen in many examples. The, discipline of thermodynamics arose from the, need to understand and improve the working of, heat engines. The steam engine, as we know,, is inseparable from the Industrial Revolution in, England in the eighteenth century, which had, great impact on the course of human, civilisation. Sometimes technology gives rise to, new physics; at other times physics generates, new technology. An example of the latter is the, wireless communication technology that followed, the discovery of the basic laws of electricity and, magnetism in the nineteenth century. The, applications of physics are not always easy to, foresee. As late as 1933, the great physicist, Ernest Rutherford had dismissed the possibility, of tapping energy from atoms. But only a few, years later, in 1938, Hahn and Meitner, discovered the phenomenon of neutron-induced, fission of uranium, which would serve as the, basis of nuclear power reactors and nuclear, weapons. Yet another important example of, physics giving rise to technology is the silicon, ‘chip’ that triggered the computer revolution in, the last three decades of the twentieth century., , Table 1.1 Some physicists from different countries of the world and their major contributions, Name, , Major contribution/discovery, , Country of, Origin, , Archimedes, , Principle of buoyancy; Principle of the lever, , Greece, , Galileo Galilei, , Law of inertia, , Italy, , Christiaan Huygens, , Wave theory of light, , Holland, , Isaac Newton, , Universal law of gravitation; Laws of motion;, Reflecting telescope, , U.K., , Michael Faraday, , Laws of electromagnetic induction, , U.K., , James Clerk Maxwell, , Electromagnetic theory; Light-an, electromagnetic wave, , U.K., , Heinrich Rudolf Hertz, , Generation of electromagnetic waves, , Germany, , J.C. Bose, , Ultra short radio waves, , India, , W.K. Roentgen, , X-rays, , Germany, , J.J. Thomson, , Electron, , U.K., , Marie Sklodowska Curie, , Discovery of radium and polonium; Studies on Poland, natural radioactivity, , Albert Einstein, , Explanation of photoelectric effect;, Theory of relativity, , 2018-19, , Germany

Page 6 :
6, , PHYSICS, , Name, , Major contribution/discovery, , Country of, Origin, , Victor Francis Hess, , Cosmic radiation, , Austria, , R.A. Millikan, , Measurement of electronic charge, , U.S.A., , Ernest Rutherford, , Nuclear model of atom, , New Zealand, , Niels Bohr, , Quantum model of hydrogen atom, , Denmark, , C.V. Raman, , Inelastic scattering of light by molecules, , India, , Louis Victor de Borglie, , Wave nature of matter, , France, , M.N. Saha, , Thermal ionisation, , India, , S.N. Bose, , Quantum statistics, , India, , Wolfgang Pauli, , Exclusion principle, , Austria, , Enrico Fermi, , Controlled nuclear fission, , Italy, , Werner Heisenberg, , Quantum mechanics; Uncertainty principle, , Germany, , Paul Dirac, , Relativistic theory of electron;, Quantum statistics, , U.K., , Edwin Hubble, , Expanding universe, , U.S.A., , Ernest Orlando Lawrence, , Cyclotron, , U.S.A., , James Chadwick, , Neutron, , U.K., , Hideki Yukawa, , Theory of nuclear forces, , Japan, , Homi Jehangir Bhabha, , Cascade process of cosmic radiation, , India, , Lev Davidovich Landau, , Theory of condensed matter; Liquid helium, , Russia, , S. Chandrasekhar, , Chandrasekhar limit, structure and evolution, of stars, , India, , John Bardeen, , Transistors; Theory of super conductivity, , U.S.A., , C.H. Townes, , Maser; Laser, , U.S.A., , Abdus Salam, , Unification of weak and electromagnetic, interactions, , Pakistan, , of physical laws? We shall now discuss the, nature of fundamental forces and the laws that, govern the diverse phenomena of the physical, world., 1.4 FUNDAMENTAL FORCES IN NATURE*, We all have an intuitive notion of force. In our, experience, force is needed to push, carry or, throw objects, deform or break them. We also, experience the impact of forces on us, like when, a moving object hits us or we are in a merry-goround. Going from this intuitive notion to the, proper scientific concept of force is not a trivial, matter. Early thinkers like Aristotle had wrong, , *, , ideas about it. The correct notion of force was, arrived at by Isaac Newton in his famous laws of, motion. He also gave an explicit form for the force, for gravitational attraction between two bodies., We shall learn these matters in subsequent, chapters., In the macroscopic world, besides the, gravitational force, we encounter several kinds, of forces: muscular force, contact forces between, bodies, friction (which is also a contact force, parallel to the surfaces in contact), the forces, exerted by compressed or elongated springs and, taut strings and ropes (tension), the force of, buoyancy and viscous force when solids are in, , Sections 1.4 and 1.5 contain several ideas that you may not grasp fully in your first reading. However, we, advise you to read them carefully to develop a feel for some basic aspects of physics. These are some of the, areas which continue to occupy the physicists today., , 2018-19

Page 7 :
PHYSICAL WORLD, , 7, , Table 1.2 Link between technology and physics, Technology, , Scientific principle(s), , Steam engine, , Laws of thermodynamics, , Nuclear reactor, , Controlled nuclear fission, , Radio and Television, , Generation, propagation and detection, of electromagnetic waves, , Computers, , Digital logic, , Lasers, , Light amplification by stimulated emission of, radiation, , Production of ultra high magnetic, fields, , Superconductivity, , Rocket propulsion, , Newton’s laws of motion, , Electric generator, , Faraday’s laws of electromagnetic induction, , Hydroelectric power, , Conversion of gravitational potential energy into, electrical energy, , Aeroplane, , Bernoulli’s principle in fluid dynamics, , Particle accelerators, , Motion of charged particles in electromagnetic, fields, , Sonar, , Reflection of ultrasonic waves, , Optical fibres, , Total internal reflection of light, , Non-reflecting coatings, , Thin film optical interference, , Electron microscope, , Wave nature of electrons, , Photocell, , Photoelectric effect, , Fusion test reactor (Tokamak), , Magnetic confinement of plasma, , Giant Metrewave Radio, Telescope (GMRT), , Detection of cosmic radio waves, , Bose-Einstein condensate, , Trapping and cooling of atoms by laser beams and, magnetic fields., , contact with fluids, the force due to pressure of, a fluid, the force due to surface tension of a liquid,, and so on. There are also forces involving charged, and magnetic bodies. In the microscopic domain, again, we have electric and magnetic forces,, nuclear forces involving protons and neutrons,, interatomic and intermolecular forces, etc. We, shall get familiar with some of these forces in later, parts of this course., A great insight of the twentieth century, physics is that these different forces occurring, in different contexts actually arise from only a, small number of fundamental forces in nature., For example, the elastic spring force arises due, , to the net attraction/repulsion between the, neighbouring atoms of the spring when the, spring is elongated/compressed. This net, attraction/repulsion can be traced to the, (unbalanced) sum of electric forces between the, charged constituents of the atoms., In principle, this means that the laws for, ‘derived’ forces (such as spring force, friction), are not independent of the laws of fundamental, forces in nature. The origin of these derived, forces is, however, very complex., At the present stage of our understanding,, we know of four fundamental forces in nature,, which are described in brief here :, , 2018-19

Page 8 :
8, , PHYSICS, , Albert Einstein (1879-1955), Albert Einstein, born in Ulm, Germany in 1879, is universally regarded as, one of the greatest physicists of all time. His astonishing scientific career, began with the publication of three path-breaking papers in 1905. In the, first paper, he introduced the notion of light quanta (now called photons), and used it to explain the features of photoelectric effect that the classical, wave theory of radiation could not account for. In the second paper, he, developed a theory of Brownian motion that was confirmed experimentally, a few years later and provided a convincing evidence of the atomic picture of, matter. The third paper gave birth to the special theory of relativity that, made Einstein a legend in his own life time. In the next decade, he explored the consequences of his, new theory which included, among other things, the mass-energy equivalence enshrined in his famous, equation E = mc2. He also created the general version of relativity (The General Theory of Relativity),, which is the modern theory of gravitation. Some of Einstein’s most significant later contributions are:, the notion of stimulated emission introduced in an alternative derivation of Planck’s blackbody radiation, law, static model of the universe which started modern cosmology, quantum statistics of a gas of, massive bosons, and a critical analysis of the foundations of quantum mechanics. The year 2005 was, declared as International Year of Physics, in recognition of Einstein’s monumental contribution to, physics, in year 1905, describing revolutionary scientific ideas that have since influenced all of modern, physics., , 1.4.1 Gravitational Force, The gravitational force is the force of mutual, attraction between any two objects by virtue of, their masses. It is a universal force. Every object, experiences this force due to every other object, in the universe. All objects on the earth, for, example, experience the force of gravity due to, the earth. In particular, gravity governs the, motion of the moon and artificial satellites around, the earth, motion of the earth and planets, around the sun, and, of course, the motion of, bodies falling to the earth. It plays a key role in, the large-scale phenomena of the universe, such, as formation and evolution of stars, galaxies and, galactic clusters., 1.4.2 Electromagnetic Force, Electromagnetic force is the force between, charged particles. In the simpler case when, charges are at rest, the force is given by, Coulomb’s law : attractive for unlike charges and, repulsive for like charges. Charges in motion, produce magnetic effects and a magnetic field, gives rise to a force on a moving charge. Electric, and magnetic effects are, in general,, inseparable – hence the name electromagnetic, force. Like the gravitational force,, electromagnetic force acts over large distances, and does not need any intervening medium. It, is enormously strong compared to gravity. The, , 2018-19, , electric force between two protons, for example,, 36, is 10 times the gravitational force between, them, for any fixed distance., Matter, as we know, consists of elementary, charged constituents like electrons and, protons. Since the electromagnetic force is so, much stronger than the gravitational force, it, dominates all phenomena at atomic and, molecular scales. (The other two forces, as we, shall see, operate only at nuclear scales.) Thus, it is mainly the electromagnetic force that, governs the structure of atoms and molecules,, the dynamics of chemical reactions and the, mechanical, thermal and other properties of, materials. It underlies the macroscopic forces, like ‘tension’, ‘friction’, ‘normal force’, ‘spring, force’, etc., Gravity is always attractive, while, electromagnetic force can be attractive or, repulsive. Another way of putting it is that mass, comes only in one variety (there is no negative, mass), but charge comes in two varieties :, positive and negative charge. This is what, makes all the difference. Matter is mostly, electrically neutral (net charge is zero). Thus,, electric force is largely zero and gravitational, force dominates terrestrial phenomena. Electric, force manifests itself in atmosphere where the, atoms are ionised and that leads to lightning.

Page 9 :
PHYSICAL WORLD, , 9, , Satyendranath Bose (1894-1974), Satyendranath Bose, born in Calcutta in 1894, is among the great Indian, physicists who made a fundamental contribution to the advance of science, in the twentieth century. An outstanding student throughout, Bose started, his career in 1916 as a lecturer in physics in Calcutta University; five years, later he joined Dacca University. Here in 1924, in a brilliant flash of insight,, Bose gave a new derivation of Planck’s law, treating radiation as a gas of, photons and employing new statistical methods of counting of photon states., He wrote a short paper on the subject and sent it to Einstein who, immediately recognised its great significance, translated it in German and, forwarded it for publication. Einstein then applied the same method to a, gas of molecules., The key new conceptual ingredient in Bose’s work was that the particles were regarded as, indistinguishable, a radical departure from the assumption that underlies the classical MaxwellBoltzmann statistics. It was soon realised that the new Bose-Einstein statistics was applicable to, particles with integers spins, and a new quantum statistics (Fermi-Dirac statistics) was needed for, particles with half integers spins satisfying Pauli’s exclusion principle. Particles with integers spins, are now known as bosons in honour of Bose., An important consequence of Bose-Einstein statistics is that a gas of molecules below a certain, temperature will undergo a phase transition to a state where a large fraction of atoms populate the, same lowest energy state. Some seventy years were to pass before the pioneering ideas of Bose, developed, further by Einstein, were dramatically confirmed in the observation of a new state of matter in a dilute, gas of ultra cold alkali atoms - the Bose-Eintein condensate., , If we reflect a little, the enormous strength, of the electromagnetic force compared to, gravity is evident in our daily life. When we, hold a book in our hand, we are balancing the, gravitational force on the book due to the huge, mass of the earth by the ‘normal force’, provided by our hand. The latter is nothing, but the net electromagnetic force between the, charged constituents of our hand and, the book, at the surface in contact. If, electromagnetic force were not intrinsically so, much stronger than gravity, the hand of the, strongest man would crumble under the, weight of a feather ! Indeed, to be consistent,, in that circumstance, we ourselves would, crumble under our own weight !, 1.4.3 Strong Nuclear Force, The strong nuclear force binds protons and, neutrons in a nucleus. It is evident that without, some attractive force, a nucleus will be, unstable due to the electric repulsion between, its protons. This attractive force cannot be, gravitational since force of gravity is negligible, compared to the electric force. A new basic force, must, therefore, be invoked. The strong nuclear, force is the strongest of all fundamental forces,, about 100 times the electromagnetic force in, , strength. It is charge-independent and acts, equally between a proton and a proton, a, neutron and a neutron, and a proton and a, neutron. Its range is, however, extremely small,, –15, of about nuclear dimensions (10 m). It is, responsible for the stability of nuclei. The, electron, it must be noted, does not experience, this force., Recent developments have, however,, indicated that protons and neutrons are built, out of still more elementary constituents called, quarks., 1.4.4 Weak Nuclear Force, The weak nuclear force appears only in certain, nuclear processes such as the β-decay of a, nucleus. In β-decay, the nucleus emits an, electron and an uncharged particle called, neutrino. The weak nuclear force is not as weak, as the gravitational force, but much weaker, than the strong nuclear and electromagnetic, forces. The range of weak nuclear force is, exceedingly small, of the order of 10–16 m., 1.4.5 Towards Unification of Forces, We remarked in section 1.1 that unification is a, basic quest in physics. Great advances in, physics often amount to unification of different, , 2018-19

Page 10 :
10, , PHYSICS, , Table 1.3 Fundamental forces of nature, Name, , Relative, strength, , Range, , Operates among, , Gravitational force, , 10–39, , Infinite, , All objects in the universe, , Very short, Sub-nuclear, size (∼10–16m), , Some elementary particles,, particularly electron and, neutrino, , –13, , Weak nuclear force, , 10, , Electromagnetic force, , 10–2, , Infinite, , Charged particles, , Strong nuclear force, , 1, , Short, nuclear, size (∼10–15m), , Nucleons, heavier, elementary particles, , theories and domains. Newton unified terrestrial, and celestial domains under a common law of, gravitation. The experimental discoveries of, Oersted and Faraday showed that electric and, magnetic phenomena are in general, inseparable. Maxwell unified electromagnetism, and optics with the discovery that light is an, electromagnetic wave. Einstein attempted to, unify gravity and electromagnetism but could, not succeed in this venture. But this did not, deter physicists from zealously pursuing the, goal of unification of forces., Recent decades have seen much progress on, this front. The electromagnetic and the weak, nuclear force have now been unified and are, seen as aspects of a single ‘electro-weak’ force., What this unification actually means cannot, be explained here. Attempts have been (and are, being) made to unify the electro-weak and the, strong force and even to unify the gravitational, force with the rest of the fundamental forces., Many of these ideas are still speculative and, inconclusive. Table 1.4 summarises some of the, milestones in the progress towards unification, of forces in nature., , 1.5 NATURE OF PHYSICAL LAWS, Physicists explore the universe. Their, investigations, based on scientific processes,, range from particles that are smaller than, atoms in size to stars that are very far away. In, addition to finding the facts by observation and, experimentation, physicists attempt to discover, the laws that summarise (often as mathematical, equations) these facts., In any physical phenomenon governed by, different forces, several quantities may change, with time. A remarkable fact is that some special, physical quantities, however, remain constant, in time. They are the conserved quantities of, nature. Understanding these conservation, principles is very important to describe the, observed phenomena quantitatively., For motion under an external conservative, force, the total mechanical energy i.e. the sum, of kinetic and potential energy of a body is a, constant. The familiar example is the free fall of, an object under gravity. Both the kinetic energy, of the object and its potential energy change, continuously with time, but the sum remains, fixed. If the object is released from rest, the initial, , Table 1.4 Progress in unification of different forces/domains in nature, , 2018-19

Page 11 :
PHYSICAL WORLD, , 11, , potential energy is completely converted into the, kinetic energy of the object just before it hits, the ground. This law restricted for a conservative, force should not be confused with the general, law of conservation of energy of an isolated, system (which is the basis of the First Law of, Thermodynamics)., The concept of energy is central to physics, and the expressions for energy can be written, for every physical system. When all forms of, energy e.g., heat, mechanical energy, electrical, energy etc., are counted, it turns out that energy, is conserved. The general law of conservation of, energy is true for all forces and for any kind of, transformation between different forms of, energy. In the falling object example, if you, include the effect of air resistance during the, fall and see the situation after the object hits, the ground and stays there, the total, mechanical energy is obviously not conserved., The general law of energy conservation, however,, is still applicable. The initial potential energy, of the stone gets transformed into other forms, of energy : heat and sound. (Ultimately, sound, after it is absorbed becomes heat.) The total, energy of the system (stone plus the, surroundings) remains unchanged., The law of conservation of energy is thought, to be valid across all domains of nature, from, the microscopic to the macroscopic. It is, routinely applied in the analysis of atomic,, nuclear and elementary particle processes. At, , the other end, all kinds of violent phenomena, occur in the universe all the time. Yet the total, energy of the universe (the most ideal isolated, system possible !) is believed to remain, unchanged., Until the advent of Einstein’s theory of, relativity, the law of conservation of mass was, regarded as another basic conservation law of, nature, since matter was thought to be, indestructible. It was (and still is) an important, principle used, for example, in the analysis of, chemical reactions. A chemical reaction is, basically a rearrangement of atoms among, different molecules. If the total binding energy, of the reacting molecules is less than the total, binding energy of the product molecules, the, difference appears as heat and the reaction is, exothermic. The opposite is true for energy, absorbing (endothermic) reactions. However,, since the atoms are merely rearranged but not, destroyed, the total mass of the reactants is the, same as the total mass of the products in a, chemical reaction. The changes in the binding, energy are too small to be measured as changes, in mass., According to Einstein’s theory, mass m is, equivalent to energy E given by the relation, 2, E = mc , where c is speed of light in vacuum., In a nuclear process mass gets converted to, energy (or vice-versa). This is the energy which, is released in a nuclear power generation and, nuclear explosions., , Sir C.V. Raman (1888-1970), Chandrashekhara Venkata Raman was born on 07 Nov 1888 in Thiruvanaikkaval., He finished his schooling by the age of eleven. He graduated from Presidency, College, Madras. After finishing his education he joined financial services of the, Indian Government., While in Kolkata, he started working on his area of interest at Indian Association for Cultivation of Science founded by Dr. Mahendra Lal Sirkar, during his, evening hours. His area of interest included vibrations, variety of musical instruments, ultrasonics, diffraction and so on., In 1917 he was offered Professorship at Calcutta University. In 1924 he was, elected ‘Fellow’ of the Royal Society of London and received Nobel prize in Physics, in 1930 for his discovery, now known as Raman Effect., The Raman Effect deals with scattering of light by molecules of a medium, when they are excited to vibrational energy levels. This work opened totally new, avenues for research for years to come., He spent his later years at Bangalore, first at Indian Institute of Science and then at Raman Research Institute. His work has inspired generation of young students., , 2018-19

Page 12 :
12, , PHYSICS, , Energy is a scalar quantity. But all conserved, quantities are not necessarily scalars. The total, linear momentum and the total angular, momentum (both vectors) of an isolated system, are also conserved quantities. These laws can, be derived from Newton’s laws of motion in, mechanics. But their validity goes beyond, mechanics. They are the basic conservation, laws of nature in all domains, even in those, where Newton’s laws may not be valid., Besides their great simplicity and generality,, the conservation laws of nature are very useful, in practice too. It often happens that we cannot, solve the full dynamics of a complex problem, involving different particles and forces. The, conservation laws can still provide useful, results. For example, we may not know the, complicated forces that act during a collision, of two automobiles; yet momentum, conservation law enables us to bypass the, complications and predict or rule out possible, outcomes of the collision. In nuclear and, elementary particle phenomena also, the, conservation laws are important tools of, analysis. Indeed, using the conservation laws, of energy and momentum for β-decay, Wolfgang, Pauli (1900-1958) correctly predicted in 1931, the existence of a new particle (now called, neutrino) emitted in β-decay along with the, electron., Conservation laws have a deep connection, with symmetries of nature that you will explore, in more advanced courses in physics. For, example, an important observation is that the, laws of nature do not change with time! If you, perform an experiment in your laboratory today, and repeat the same experiment (on the same, objects under identical conditions) after a year,, the results are bound to be the same. It turns, out that this symmetry of nature with respect to, translation (i.e. displacement) in time is, equivalent to the law of conservation of energy., Likewise, space is homogeneous and there is no, (intrinsically) preferred location in the universe., To put it more clearly, the laws of nature are the, same everywhere in the universe. (Caution : the, phenomena may differ from place to place, , *, , See Chapter 7, , 2018-19, , Conservation laws in physics, Conservation of energy, momentum, angular, momentum, charge, etc are considered to be, fundamental laws in physics. At this moment,, there are many such conservation laws. Apart from, the above four, there are others which mostly deal, with quantities which have been introduced in, nuclear and particle physics. Some of the, conserved quantities are called spin, baryon, number, strangeness, hypercharge, etc, but you, need not worry about them., A conservation law is a hypothesis, based on, observations and experiments. It is important to, remember that a conservation law cannot be, proved. It can be verified, or disproved, by, experiments. An experiment whose result is in, conformity with the law verifies or substantiates, the law; it does not prove the law. On the other, hand, a single experiment whose result goes, against the law is enough to disprove it., It would be wrong to ask somebody to prove, the law of conservation of energy. This law is an, outcome of our experience over several centuries,, and it has been found to be valid in all, experiments, in mechanics, thermodynamics,, electromagnetism, optics, atomic and nuclear, physics, or any other area., Some students feel that they can prove the, conservation of mechanical energy from a body, falling under gravity, by adding the kinetic and, potential energies at a point and showing that it, turns out to be constant. As pointed out above,, this is only a verification of the law, not its proof., , because of differing conditions at different, locations. For example, the acceleration due to, gravity at the moon is one-sixth that at the earth,, but the law of gravitation is the same both on, the moon and the earth.) This symmetry of the, laws of nature with respect to translation in, space gives rise to conservation of linear, momentum. In the same way isotropy of space, (no intrinsically preferred direction in space), underlies the law of conservation of angular, momentum*. The conservation laws of charge and, other attributes of elementary particles can also, be related to certain abstract symmetries., Symmetries of space and time and other abstract, symmetries play a central role in modern theories, of fundamental forces in nature.

Page 13 :
PHYSICAL WORLD, , 13, , SUMMARY, 1. Physics deals with the study of the basic laws of nature and their manifestation in, different phenomena. The basic laws of physics are universal and apply in widely different, contexts and conditions., 2. The scope of physics is wide, covering a tremendous range of magnitude of physical, quantities., 3. Physics and technology are related to each other. Sometimes technology gives rise to, new physics; at other times physics generates new technology. Both have direct impact, on society., 4. There are four fundamental forces in nature that govern the diverse phenomena of the, macroscopic and the microscopic world. These are the ‘gravitational force’, the, ‘electromagnetic force’, the ‘strong nuclear force’, and the ‘weak nuclear force’. Unification, of different forces/domains in nature is a basic quest in physics., 5. The physical quantities that remain unchanged in a process are called conserved, quantities. Some of the general conservation laws in nature include the laws of, conservation of mass, energy, linear momentum, angular momentum, charge, parity,, etc. Some conservation laws are true for one fundamental force but not for the other., 6. Conservation laws have a deep connection with symmetries of nature. Symmetries of, space and time, and other types of symmetries play a central role in modern theories of, fundamental forces in nature., , EXERCISES, Note for the student, The exercises given here are meant to enhance your awareness about the issues surrounding, science, technology and society and to encourage you to think and formulate your views, about them. The questions may not have clear-cut ‘objective’ answers., Note for the teacher, The exercises given here are not for the purpose of a formal examination., 1.1, , Some of the most profound statements on the nature of science have come from, Albert Einstein, one of the greatest scientists of all time. What do you think did, Einstein mean when he said : “The most incomprehensible thing about the world is, that it is comprehensible”?, , 1.2, , “Every great physical theory starts as a heresy and ends as a dogma”. Give some, examples from the history of science of the validity of this incisive remark., , 1.3, , “Politics is the art of the possible”. Similarly, “Science is the art of the soluble”., Explain this beautiful aphorism on the nature and practice of science., , 1.4, , Though India now has a large base in science and technology, which is fast expanding,, it is still a long way from realising its potential of becoming a world leader in science., Name some important factors, which in your view have hindered the advancement of, science in India., , 1.5, , No physicist has ever “seen” an electron. Yet, all physicists believe in the existence of, electrons. An intelligent but superstitious man advances this analogy to argue that, ‘ghosts’ exist even though no one has ‘seen’ one. How will you refute his argument ?, , 1.6, , The shells of crabs found around a particular coastal location in Japan seem mostly, to resemble the legendary face of a Samurai. Given below are two explanations of this, observed fact. Which of these strikes you as a scientific explanation ?, (a), , A tragic sea accident several centuries ago drowned a young Samurai. As a tribute, to his bravery, nature through its inscrutable ways immortalised his face by, imprinting it on the crab shells in that area., , 2018-19

Page 14 :
14, , PHYSICS, , (b), , After the sea tragedy, fishermen in that area, in a gesture of honour to their, dead hero, let free any crab shell caught by them which accidentally had a shape, resembling the face of a Samurai. Consequently, the particular shape of the, crab shell survived longer and therefore in course of time the shape was genetically, propagated. This is an example of evolution by artificial selection., , [Note : This interesting illustration taken from Carl Sagan’s ‘The Cosmos’ highlights, the fact that often strange and inexplicable facts which on the first sight appear, ‘supernatural’ actually turn out to have simple scientific explanations. Try to think, out other examples of this kind]., 1.7, , The industrial revolution in England and Western Europe more than two centuries, ago was triggered by some key scientific and technological advances. What were these, advances ?, , 1.8, , It is often said that the world is witnessing now a second industrial revolution, which, will transform the society as radically as did the first. List some key contemporary areas, of science and technology, which are responsible for this revolution., , 1.9, , Write in about 1000 words a fiction piece based on your speculation on the science, and technology of the twenty-second century., , 1.10 Attempt to formulate your ‘moral’ views on the practice of science. Imagine yourself, stumbling upon a discovery, which has great academic interest but is certain to have, nothing but dangerous consequences for the human society. How, if at all, will you, resolve your dilemma ?, 1.11 Science, like any knowledge, can be put to good or bad use, depending on the user., Given below are some of the applications of science. Formulate your views on whether, the particular application is good, bad or something that cannot be so clearly, categorised :, (a) Mass vaccination against small pox to curb and finally eradicate this disease, from the population. (This has already been successfully done in India)., (b) Television for eradication of illiteracy and for mass communication of news and, ideas., (c) Prenatal sex determination, (d) Computers for increase in work efficiency, (e) Putting artificial satellites into orbits around the Earth, (f ) Development of nuclear weapons, (g) Development of new and powerful techniques of chemical and biological warfare)., (h) Purification of water for drinking, (i), Plastic surgery, (j ) Cloning, 1.12 India has had a long and unbroken tradition of great scholarship — in mathematics,, astronomy, linguistics, logic and ethics. Yet, in parallel with this, several superstitious, and obscurantistic attitudes and practices flourished in our society and unfortunately, continue even today — among many educated people too. How will you use your, knowledge of science to develop strategies to counter these attitudes ?, 1.13 Though the law gives women equal status in India, many people hold unscientific, views on a woman’s innate nature, capacity and intelligence, and in practice give, them a secondary status and role. Demolish this view using scientific arguments, and, by quoting examples of great women in science and other spheres; and persuade yourself, and others that, given equal opportunity, women are on par with men., 1.14 “It is more important to have beauty in the equations of physics than to have them, agree with experiments”. The great British physicist P. A. M. Dirac held this view., Criticize this statement. Look out for some equations and results in this book which, strike you as beautiful., 1.15 Though the statement quoted above may be disputed, most physicists do have a feeling, that the great laws of physics are at once simple and beautiful. Some of the notable, physicists, besides Dirac, who have articulated this feeling, are : Einstein, Bohr,, Heisenberg, Chandrasekhar and Feynman. You are urged to make special efforts to get, , 2018-19

Page 15 :
PHYSICAL WORLD, , 15, , access to the general books and writings by these and other great masters of physics., (See the Bibliography at the end of this book.) Their writings are truly inspiring !, 1.16 Textbooks on science may give you a wrong impression that studying science is dry, and all too serious and that scientists are absent-minded introverts who never laugh, or grin. This image of science and scientists is patently false. Scientists, like any, other group of humans, have their share of humorists, and many have led their lives, with a great sense of fun and adventure, even as they seriously pursued their scientific, work. Two great physicists of this genre are Gamow and Feynman. You will enjoy, reading their books listed in the Bibliography., , 2018-19

Page 16 :
CHAPTER TWO, , UNITS, , AND, , MEASUREMENT, , 2.1 INTRODUCTION, , 2.1 Introduction, 2.2 The international system of, units, , 2.3, 2.4, 2.5, 2.6, , Measurement of length, Measurement of mass, Measurement of time, , Accuracy, precision of, instruments and errors in, measurement, 2.7 Significant figures, , 2.8 Dimensions of physical, quantities, 2.9 Dimensional formulae and, dimensional equations, 2.10 Dimensional analysis and its, applications, Summary, Exercises, Additional exercises, , Measurement of any physical quantity involves comparison, with a certain basic, arbitrarily chosen, internationally, accepted reference standard called unit. The result of a, measurement of a physical quantity is expressed by a, number (or numerical measure) accompanied by a unit., Although the number of physical quantities appears to be, very large, we need only a limited number of units for, expressing all the physical quantities, since they are interrelated with one another. The units for the fundamental or, base quantities are called fundamental or base units. The, units of all other physical quantities can be expressed as, combinations of the base units. Such units obtained for the, derived quantities are called derived units. A complete set, of these units, both the base units and derived units, is, known as the system of units., 2.2 THE INTERNATIONAL SYSTEM OF UNITS, In earlier time scientists of different countries were using, different systems of units for measurement. Three such, systems, the CGS, the FPS (or British) system and the MKS, system were in use extensively till recently., The base units for length, mass and time in these systems, were as follows :, • In CGS system they were centimetre, gram and second, respectively., • In FPS system they were foot, pound and second, respectively., • In MKS system they were metre, kilogram and second, respectively., The system of units which is at present internationally, accepted for measurement is the Système Internationale, d’ Unites (French for International System of Units),, abbreviated as SI. The SI, with standard scheme of symbols,, units and abbreviations, was developed and recommended, by General Conference on Weights and Measures in 1971 for, , 2018-19

Page 17 :
UNITS AND MEASUREMENT, , 17, , international usage in scientific, technical,, industrial and commercial work. Because SI, units used decimal system, conversions within, the system are quite simple and convenient. We, shall follow the SI units in this book., In SI, there are seven base units as given in, Table 2.1. Besides the seven base units, there, are two more units that are defined for (a) plane, angle dθ as the ratio of length of arc ds to the, radius r and (b) solid angle dΩ as the ratio of, the intercepted area dA of the spherical surface,, described about the apex O as the centre, to, the square of its radius r, as shown in Fig. 2.1(a), and (b) respectively. The unit for plane angle is, radian with the symbol rad and the unit for the, solid angle is steradian with the symbol sr. Both, these are dimensionless quantities., Table 2.1, , (b), Fig. 2.1 Description of (a) plane angle dθ and, (b) solid angle dΩ ., , SI Base Quantities and Units*, , Base, , *, , (a), , SI Units, , quantity, , Name, , Symbol, , Definition, , Length, , metre, , m, , The metre is the length of the path travelled by light in vacuum, during a time interval of 1/299,792,458 of a second. (1983), , Mass, , kilogram, , kg, , The kilogram is equal to the mass of the international prototype, of the kilogram (a platinum-iridium alloy cylinder) kept at, international Bureau of Weights and Measures, at Sevres, near, Paris, France. (1889), , Time, , second, , s, , The second is the duration of 9,192,631,770 periods of the, radiation corresponding to the transition between the two, hyperfine levels of the ground state of the cesium-133 atom., (1967), , Electric, current, , ampere, , A, , The ampere is that constant current which, if maintained in, two straight parallel conductors of infinite length, of negligible, circular cross-section, and placed 1 metre apart in vacuum,, would produce between these conductors a force equal to 2×10–7, newton per metre of length. (1948), , Thermo, dynamic, Temperature, , kelvin, , K, , The kelvin, is the fraction 1/273.16 of the thermodynamic, temperature of the triple point of water. (1967), , Amount of, substance, , mole, , mol, , The mole is the amount of substance of a system, which contains, as many elementary entities as there are atoms in 0.012, kilogram of carbon - 12. (1971), , Luminous, intensity, , candela, , cd, , The candela is the luminous intensity, in a given, direction, of a source that emits monochromatic radiation of, frequency 540×1012 hertz and that has a radiant intensity in, that direction of 1/683 watt per steradian. (1979), , The values mentioned here need not be remembered or asked in a test. They are given here only to indicate the, extent of accuracy to which they are measured. With progress in technology, the measuring techniques get, improved leading to measurements with greater precision. The definitions of base units are revised to keep up, with this progress., , 2018-19

Page 18 :
18, , PHYSICS, , Table 2.2, , Some units retained for general use (Though outside SI), , Note that when mole is used, the elementary, entities must be specified. These entities, may be atoms, molecules, ions, electrons,, other particles or specified groups of such, particles., We employ units for some physical quantities, that can be derived from the seven base units, (Appendix A 6). Some derived units in terms of, the SI base units are given in (Appendix A 6.1)., Some SI derived units are given special names, (Appendix A 6.2 ) and some derived SI units make, use of these units with special names and the, seven base units (Appendix A 6.3). These are, given in Appendix A 6.2 and A 6.3 for your ready, reference. Other units retained for general use, are given in Table 2.2., Common SI prefixes and symbols for multiples, and sub-multiples are given in Appendix A2., General guidelines for using symbols for physical, quantities, chemical elements and nuclides are, given in Appendix A7 and those for SI units and, some other units are given in Appendix A8 for, your guidance and ready reference., 2.3 MEASUREMENT OF LENGTH, You are already familiar with some direct methods, for the measurement of length. For example, a, metre scale is used for lengths from 10–3 m to 102, m. A vernier callipers is used for lengths to an, accuracy of 10 –4 m. A screw gauge and a, spherometer can be used to measure lengths as, less as to 10 –5 m. To measure lengths beyond these, ranges, we make use of some special indirect, methods., , 2018-19, , 2.3.1 Measurement of Large Distances, Large distances such as the distance of a planet, or a star from the earth cannot be measured, directly with a metre scale. An important method, in such cases is the parallax method., When you hold a pencil in front of you against, some specific point on the background (a wall), and look at the pencil first through your left eye, A (closing the right eye) and then look at the, pencil through your right eye B (closing the left, eye), you would notice that the position of the, pencil seems to change with respect to the point, on the wall. This is called parallax. The, distance between the two points of observation, is called the basis. In this example, the basis is, the distance between the eyes., To measure the distance D of a far away, planet S by the parallax method, we observe it, from two different positions (observatories) A and, B on the Earth, separated by distance AB = b, at the same time as shown in Fig. 2.2. We, measure the angle between the two directions, along which the planet is viewed at these two, points. The ∠ASB in Fig. 2.2 represented by, symbol θ is called the parallax angle or, parallactic angle., , b, << 1, and, D, therefore, θ is very small., Then we, approximately take AB as an arc of length b of a, circle with centre at S and the distance D as, As the planet is very far away,

Page 19 :
UNITS AND MEASUREMENT, , 19, , the radius AS = BS so that AB = b = D θ where, θ is in radians., D=, , b, , AO; but he finds the line of sight of C shifted, from the original line of sight by an angle θ, = 400 (θ is known as ‘parallax’) estimate, the distance of the tower C from his original, position A., , (2.1), , θ, , Fig. 2.2 Parallax method., , Example 2.1 Calculate the angle of, (a) 10 (degree) (b) 1′ (minute of arc or arcmin), and (c) 1″(second of arc or arc second) in, radians. Use 360 0=2π rad, 10=60′ and, 1′ = 60 ″, , t, , Answer (a) We have 3600 = 2π rad, 10 = (π /180) rad = 1.745×10–2 rad, 0, (b) 1 = 60′ = 1.745×10–2 rad, 1′ = 2.908×10–4 rad
2.91×10–4 rad, (c) 1′ = 60″ = 2.908×10–4 rad, 1″ = 4.847×10–4 rad
4.85×10–6 rad, t, Example 2.2 A man wishes to estimate, the distance of a nearby tower from him., He stands at a point A in front of the tower, C and spots a very distant object O in line, with AC. He then walks perpendicular to, AC up to B, a distance of 100 m, and looks, at O and C again. Since O is very distant,, the direction BO is practically the same as, , Fig. 2.3, , Answer We have, parallax angle θ = 400, From Fig. 2.3, AB = AC tan θ, AC = AB/tanθ = 100 m/tan 400, = 100 m/0.8391 = 119 m, t, , Having determined D, we can employ a similar, method to determine the size or angular diameter, of the planet. If d is the diameter of the planet, and α the angular size of the planet (the angle, subtended by d at the earth), we have, α = d/D, (2.2), The angle α can be measured from the same, location on the earth. It is the angle between, the two directions when two diametrically, opposite points of the planet are viewed through, the telescope. Since D is known, the diameter d, of the planet can be determined using Eq. (2.2)., , t, , Example 2.3 The moon is observed from, two diametrically opposite points A and B, on Earth. The angle θ subtended at the, moon by the two directions of observation, is 1o 54′. Given the diameter of the Earth to, be about 1.276 × 107 m, compute the, distance of the moon from the Earth., , Answer We have θ = 1° 54′ = 114′, , (, , = (114 × 60 )′′ × 4.85 × 10-6, = 3.32 × 10, , −2, , ), , rad, , rad,, , −6, , since 1" = 4.85 × 10 rad ., Also b = AB = 1.276 ×107 m, Hence from Eq. (2.1), we have the earth-moon, distance,, D = b /θ, , =, , 1.276 × 107, 3.32 × 10-2, , t, , = 3.84 × 108 m, Example 2.4 The Sun’s angular diameter, is measured to be 1920′′. The distance D of, the Sun from the Earth is 1.496 ×1011 m., What is the diameter of the Sun ?, , t, , 2018-19, , t

Page 20 :
20, , PHYSICS, , Answer Sun’s angular diameter α, = 1920", −6, , , , equal to , , , rad, , = 9.31 × 10 −3 rad, Sun’s diameter, d =α D, , =  9.31 × 10−3  × 1.496 × 1011  m, , ,  , , = 1.39 × 109 m, , , , t, , 2.3.2 Estimation of Very Small Distances:, Size of a Molecule, To measure a very small size, like that of a, molecule (10–8 m to 10–10 m), we have to adopt, special methods. We cannot use a screw gauge, or similar instruments. Even a microscope has, certain limitations. An optical microscope uses, visible light to ‘look’ at the system under, investigation. As light has wave like features,, the resolution to which an optical microscope, can be used is the wavelength of light (A detailed, explanation can be found in the Class XII, Physics textbook). For visible light the range of, wavelengths is from about 4000 Å to 7000 Å, (1 angstrom = 1 Å = 10-10 m). Hence an optical, microscope cannot resolve particles with sizes, smaller than this. Instead of visible light, we can, use an electron beam. Electron beams can be, focussed by properly designed electric and, magnetic fields. The resolution of such an, electron microscope is limited finally by the fact, that electrons can also behave as waves ! (You, will learn more about this in class XII). The, wavelength of an electron can be as small as a, fraction of an angstrom. Such electron, microscopes with a resolution of 0.6 Å have been, built. They can almost resolve atoms and, molecules in a material. In recent times,, tunnelling microscopy has been developed in, which again the limit of resolution is better than, an angstrom. It is possible to estimate the sizes, of molecules., A simple method for estimating the molecular, size of oleic acid is given below. Oleic acid is a, soapy liquid with large molecular size of the, order of 10–9 m., The idea is to first form mono-molecular layer, of oleic acid on water surface., We dissolve 1 cm3 of oleic acid in alcohol to, make a solution of 20 cm3. Then we take 1 cm3, , 2018-19, , 1, , 3, 3,  cm of oleic acid/cm of, 20 × 20 , , solution. Next we lightly sprinkle some, lycopodium powder on the surface of water in a, large trough and we put one drop of this solution, in the water. The oleic acid drop spreads into a, thin, large and roughly circular film of molecular, thickness on water surface. Then, we quickly, measure the diameter of the thin film to get its, area A. Suppose we have dropped n drops in, the water. Initially, we determine the, approximate volume of each drop (V cm3)., Volume of n drops of solution, = nV cm3, Amount of oleic acid in this solution, , , 1, 3, nV, ,  cm, =,  20 × 20 , , This solution of oleic acid spreads very fast, on the surface of water and forms a very thin, layer of thickness t. If this spreads to form a, film of area A cm2, then the thickness of the, film, t=, , or,, , t=, , Volume of the film, Area of the film, nV, cm, 20 × 20 A, , (2.3), , If we assume that the film has mono-molecular, thickness, then this becomes the size or diameter, of a molecule of oleic acid. The value of this, thickness comes out to be of the order of 10–9 m., t, , = 1920 × 4.85 × 10, , of this solution and dilute it to 20 cm3, using, alcohol. So, the concentration of the solution is, , Example 2.5 If the size of a nucleus (in, the range of 10–15 to 10–14 m) is scaled up, to the tip of a sharp pin, what roughly is, the size of an atom ? Assume tip of the pin, to be in the range 10–5m to 10–4m., , Answer The size of a nucleus is in the range of, 10–15 m and 10–14 m. The tip of a sharp pin is, taken to be in the range of 10–5 m and 10–4 m., Thus we are scaling up by a factor of 1010. An, atom roughly of size 10–10 m will be scaled up to a, size of 1 m. Thus a nucleus in an atom is as small, in size as the tip of a sharp pin placed at the centre, of a sphere of radius about a metre long., t

Page 21 :
UNITS AND MEASUREMENT, , 21, , 2.3.3 Range of Lengths, The sizes of the objects we come across in the, universe vary over a very wide range. These may, vary from the size of the order of 10–14 m of the, tiny nucleus of an atom to the size of the order, of 1026 m of the extent of the observable universe., Table 2.3 gives the range and order of lengths, and sizes of some of these objects., We also use certain special length units for, short and large lengths. These are, 1 fermi, = 1 f = 10–15 m, 1 angstrom, = 1 Å = 10–10 m, 1 astronomical unit, = 1 AU (average distance, of the Sun from the Earth), = 1.496 × 1011 m, 1 light year = 1 ly= 9.46 × 1015 m (distance, that light travels with velocity of, 3 × 108 m s–1 in 1 year), 1 parsec, = 3.08 × 1016 m (Parsec is the, distance at which average radius of earth’s orbit, subtends an angle of 1 arc second), 2.4 MEASUREMENT OF MASS, Mass is a basic property of matter. It does not, depend on the temperature, pressure or location, of the object in space. The SI unit of mass is, kilogram (kg). The prototypes of the International, standard kilogram supplied by the International, Bureau of Weights and Measures (BIPM) are, available in many other laboratories of different, countries. In India, this is available at the, National Physical Laboratory (NPL), New Delhi., , While dealing with atoms and molecules, the, kilogram is an inconvenient unit. In this case,, there is an important standard unit of mass,, called the unified atomic mass unit (u), which, has been established for expressing the mass, of atoms as, 1 unified atomic mass unit = 1u, = (1/12) of the mass of an atom of carbon-12, 12, isotope 6 C including the mass of electrons, = 1.66 × 10–27 kg, , (, , ), , Mass of commonly available objects can be, determined by a common balance like the one, used in a grocery shop. Large masses in the, universe like planets, stars, etc., based on, Newton’s law of gravitation can be measured by, using gravitational method (See Chapter 8). For, measurement of small masses of atomic/subatomic particles etc., we make use of mass, spectrograph in which radius of the trajectory, is proportional to the mass of a charged particle, moving in uniform electric and magnetic field., 2.4.1 Range of Masses, The masses of the objects, we come across in, the universe, vary over a very wide range. These, may vary from tiny mass of the order of 10-30 kg, of an electron to the huge mass of about 1055 kg, of the known universe. Table 2.4 gives the range, and order of the typical masses of various, objects., , Table 2.3 Range and order of lengths, , 2018-19

Page 22 :
22, , PHYSICS, , Table 2.4 Range and order of masses, , 2.5 MEASUREMENT OF TIME, To measure any time interval we need a clock., We now use an atomic standard of time, which, is based on the periodic vibrations produced in, a cesium atom. This is the basis of the cesium, clock, sometimes called atomic clock, used in, the national standards. Such standards are, available in many laboratories. In the cesium, atomic clock, the second is taken as the time, needed for 9,192,631,770 vibrations of the, radiation corresponding to the transition, between the two hyperfine levels of the ground, state of cesium-133 atom. The vibrations of the, cesium atom regulate the rate of this cesium, atomic clock just as the vibrations of a balance, wheel regulate an ordinary wristwatch or the, vibrations of a small quartz crystal regulate a, quartz wristwatch., The cesium atomic clocks are very accurate., In principle they provide portable standard. The, national standard of time interval ‘second’ as, well as the frequency is maintained through four, cesium atomic clocks. A cesium atomic clock is, used at the National Physical Laboratory (NPL),, New Delhi to maintain the Indian standard of, time., In our country, the NPL has the responsibility, of maintenance and improvement of physical, standards, including that of time, frequency, etc., Note that the Indian Standard Time (IST) is, linked to this set of atomic clocks. The efficient, cesium atomic clocks are so accurate that they, impart the uncertainty in time realisation as, , 2018-19, , ± 1 × 10–13, i.e. 1 part in 1013. This implies that, the uncertainty gained over time by such a, device is less than 1 part in 1013; they lose or, gain no more than 3 µs in one year. In view of, the tremendous accuracy in time measurement,, the SI unit of length has been expressed in terms, the path length light travels in certain interval, of time (1/299, 792, 458 of a second) (Table 2.1)., The time interval of events that we come, across in the universe vary over a very wide, range. Table 2.5 gives the range and order of, some typical time intervals., You may notice that there is an interesting, coincidence between the numbers appearing, in Tables 2.3 and 2.5. Note that the ratio of the, longest and shortest lengths of objects in our, universe is about 1041. Interestingly enough,, the ratio of the longest and shortest time, intervals associated with the events and objects, in our universe is also about 1041. This number,, 1041 comes up again in Table 2.4, which lists, typical masses of objects. The ratio of the, largest and smallest masses of the objects in, our universe is about (1041)2. Is this a curious, coincidence between these large numbers, purely accidental ?, 2.6 ACCURACY, PRECISION OF INSTRUMENTS, AND ERRORS IN MEASUREMENT, Measurement is the foundation of all, experimental science and technology. The result, of every measurement by any measuring, instrument contains some uncertainty. This, uncertainty is called error. Every calculated, quantity which is based on measured values,, also has an error. We shall distinguish between, two terms: accuracy and precision. The, accuracy of a measurement is a measure of how, close the measured value is to the true value of, the quantity. Precision tells us to what resolution, or limit the quantity is measured., The accuracy in measurement may depend on, several factors, including the limit or the resolution, of the measuring instrument. For example, suppose, the true value of a certain length is near 3.678 cm., In one experiment, using a measuring instrument, of resolution 0.1 cm, the measured value is found to, be 3.5 cm, while in another experiment using a, measuring device of greater resolution, say 0.01 cm,, the length is determined to be 3.38 cm. The first, measurement has more accuracy (because it is

Page 23 :
UNITS AND MEASUREMENT, , 23, , Table 2.5, , Range and order of time intervals, , closer to the true value) but less precision (its, resolution is only 0.1 cm), while the, second measurement is less accurate but, more precise. Thus every measurement is, approximate due to errors in measurement. In, general, the errors in measurement can be, broadly classified as (a) systematic errors and, (b) random errors., Systematic errors, The systematic errors are those errors that, tend to be in one direction, either positive or, negative. Some of the sources of systematic, errors are :, (a) Instrumental errors that arise from the, errors due to imperfect design or calibration, of the measuring instrument, zero error in, the instrument, etc. For example, the, temperature graduations of a thermometer, may be inadequately calibrated (it may read, 104 °C at the boiling point of water at STP, whereas it should read 100 °C); in a vernier, callipers the zero mark of vernier scale may, not coincide with the zero mark of the main, scale, or simply an ordinary metre scale may, be worn off at one end., (b) Imperfection in experimental technique, or procedure To determine the temperature, , of a human body, a thermometer placed, under the armpit will always give a, temperature lower than the actual value of, the body temperature. Other external, conditions (such as changes in temperature,, humidity, wind velocity, etc.) during the, experiment may systematically affect the, measurement., (c) Personal errors that arise due to an, individual’s bias, lack of proper setting of, the apparatus or individual’s carelessness, in taking observations without observing, proper precautions, etc. For example, if you,, by habit, always hold your head a bit too far, to the right while reading the position of a, needle on the scale, you will introduce an, error due to parallax., Systematic errors can be minimised by, improving experimental techniques, selecting, better instruments and removing personal bias, as far as possible. For a given set-up, these, errors may be estimated to a certain extent and, the necessary corrections may be applied to the, readings., Random errors, The random errors are those errors, which occur, irregularly and hence are random with respect, , 2018-19

Page 24 :
24, , PHYSICS, , to sign and size. These can arise due to random, and unpredictable fluctuations in experimental, conditions (e.g. unpredictable fluctuations in, temperature, voltage supply, mechanical, vibrations of experimental set-ups, etc), personal, (unbiased) errors by the observer taking, readings, etc. For example, when the same, person repeats the same observation, it is very, likely that he may get different readings, everytime., Least count error, The smallest value that can be measured by the, measuring instrument is called its least count., All the readings or measured values are good only, up to this value., The least count error is the error, associated with the resolution of the instrument., For example, a vernier callipers has the least, count as 0.01 cm; a spherometer may have a, least count of 0.001 cm. Least count error, belongs to the category of random errors but, within a limited size; it occurs with both, systematic and random errors. If we use a metre, scale for measurement of length, it may have, graduations at 1 mm division scale spacing or, interval., Using instruments of higher precision,, improving experimental techniques, etc., we can, reduce the least count error. Repeating the, observations several times and taking the, arithmetic mean of all the observations, the, mean value would be very close to the true value, of the measured quantity., 2.6.1 Absolute Error, Relative Error and, Percentage Error, (a) Suppose the values obtained in several, measurements are a1, a2, a3...., an. The, arithmetic mean of these values is taken as, the best possible value of the quantity under, the given conditions of measurement as :, amean = (a1+a2+a3+...+an ) / n, , (2.4), , or,, n, , a mean =, , ∑a, i =1, , i, , /n, , (2.5), , This is because, as explained earlier, it is, reasonable to suppose that individual, measurements are as likely to overestimate, , 2018-19, , as to underestimate the true value of the, quantity., The magnitude of the difference, between the individual measurement and, the true value of the quantity is called the, absolute error of the measurement. This, is denoted by |∆a |. In absence of any other, method of knowing true value, we considered, arithmatic mean as the true value. Then the, errors in the individual measurement values, from the true value, are, ∆a1 = a1 – amean,, ∆a2 = a2 – amean,, ...., ...., ...., ...., ...., ...., ∆a n = an – amean, The ∆a calculated above may be positive in, certain cases and negative in some other, cases. But absolute error |∆a| will always, be positive., (b) The arithmetic mean of all the absolute errors, is taken as the final or mean absolute error, of the value of the physical quantity a. It is, represented by ∆amean., Thus,, ∆amean = (|∆a1|+|∆a2 |+|∆a3|+...+ |∆an|)/n, (2.6), n, , =, , ∑, i =1, , |∆ai|/n, , (2.7), , If we do a single measurement, the value we, get may be in the range amean ± ∆amean, , i.e., , a = amean ± ∆amean, , or,, , amean – ∆amean ≤ a ≤ amean + ∆amean, (2.8), This implies that any measurement of the, physical quantity a is likely to lie between, (amean+ ∆amean ) and (amean− ∆amean )., (c) Instead of the absolute error, we often use, the relative error or the percentage error, (δa). The relative error is the ratio of the, mean absolute error ∆amean to the mean, value amean of the quantity measured.

Page 25 :
UNITS AND MEASUREMENT, , Relative error = ∆amean/amean, , 25, , When the relative error is expressed in per, cent, it is called the percentage error (δa)., Thus, Percentage error, δa = (∆amean /amean ) × 100%, , (2.10), , Let us now consider an example., Example 2.6 Two clocks are being tested, against a standard clock located in a, national laboratory. At 12:00:00 noon by, the standard clock, the readings of the two, clocks are :, , t, , Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday, , Clock 1, , Clock 2, , 12:00:05, 12:01:15, 11:59:08, 12:01:50, 11:59:15, 12:01:30, 12:01:19, , 10:15:06, 10:14:59, 10:15:18, 10:15:07, 10:14:53, 10:15:24, 10:15:11, , If you are doing an experiment that requires, precision time interval measurements, which, of the two clocks will you prefer ?, Answer The range of variation over the seven, days of observations is 162 s for clock 1, and, 31 s for clock 2. The average reading of clock 1, is much closer to the standard time than the, average reading of clock 2. The important point, is that a clock’s zero error is not as significant, for precision work as its variation, because a, ‘zero-error’ can always be easily corrected., Hence clock 2 is to be preferred to clock 1., t, Example 2.7 We measure the period of, oscillation of a simple pendulum. In, successive measurements, the readings, turn out to be 2.63 s, 2.56 s, 2.42 s, 2.71s, and 2.80 s. Calculate the absolute errors,, relative error or percentage error., , t, , Answer The mean period of oscillation of the, pendulum, ( 2.63 + 2.56 + 2.42 + 2.71 + 2.80) s, T =, , =, , 5, , 13.12, 5, , s, , = 2.624 s, = 2.62 s, , (2.9), , As the periods are measured to a resolution, of 0.01 s, all times are to the second decimal; it, is proper to put this mean period also to the, second decimal., The errors in the measurements are, 2.63 s – 2.62 s = 0.01 s, 2.56 s – 2.62 s = – 0.06 s, 2.42 s – 2.62 s = – 0.20 s, 2.71 s – 2.62 s = 0.09 s, 2.80 s – 2.62 s = 0.18 s, Note that the errors have the same units as the, quantity to be measured., The arithmetic mean of all the absolute errors, (for arithmetic mean, we take only the, magnitudes) is, ∆Τmean = [(0.01+ 0.06+0.20+0.09+0.18)s]/5, = 0.54 s/5, = 0.11 s, That means, the period of oscillation of the, simple pendulum is (2.62 ± 0.11) s i.e. it lies, between (2.62 + 0.11) s and (2.62 – 0.11) s or, between 2.73 s and 2.51 s. As the arithmetic, mean of all the absolute errors is 0.11 s, there, is already an error in the tenth of a second., Hence there is no point in giving the period to a, hundredth. A more correct way will be to write, T = 2.6 ± 0.1 s, Note that the last numeral 6 is unreliable, since, it may be anything between 5 and 7. We indicate, this by saying that the measurement has two, significant figures. In this case, the two, significant figures are 2, which is reliable and, 6, which has an error associated with it. You, will learn more about the significant figures in, section 2.7., For this example, the relative error or the, percentage error is, δa =, , 0.1, 2.6, , × 100 = 4 %, , t, , 2.6.2 Combination of Errors, If we do an experiment involving several, measurements, we must know how the errors, in all the measurements combine. For example,, , 2018-19

Page 26 :
26, , PHYSICS, , What a naïve question, at this stage, you might, say! But what if it is not a straight line? Draw, a zigzag line in your copy, or on the blackboard., Well, not too difficult again. You might take a, thread, place it along the line, open up the, thread, and measure its length., Now imagine that you want to measure the, length of a national highway, a river, the railway, track between two stations, or the boundary, between two states or two nations. If you take, a string of length 1 metre or 100 metre, keep it, along the line, shift its position every time, the, arithmetic of man-hours of labour and expenses, on the project is not commensurate with the, outcome. Moreover, errors are bound to occur, in this enormous task. There is an interesting, fact about this. France and Belgium share a, common international boundary, whose length, mentioned in the official documents of the two, countries differs substantially!, Go one step beyond and imagine the, coastline where land meets sea. Roads and rivers, have fairly mild bends as compared to a, coastline. Even so, all documents, including our, school books, contain information on the length, of the coastline of Gujarat or Andhra Pradesh,, or the common boundary between two states,, etc. Railway tickets come with the distance, between stations printed on them. We have, ‘milestones’ all along the roads indicating the, distances to various towns. So, how is it done?, One has to decide how much error one can, tolerate and optimise cost-effectiveness. If you, want smaller errors, it will involve high, technology and high costs. Suffice it to say that, it requires fairly advanced level of physics,, mathematics, engineering and technology. It, belongs to the areas of fractals, which has lately, become popular in theoretical physics. Even, then one doesn’t know how much to rely on, the figure that props up, as is clear from the, story of France and Belgium. Incidentally, this, story of the France-Belgium discrepancy, appears on the first page of an advanced Physics, book on the subject of fractals and chaos!, , mass density is obtained by deviding mass by, the volume of the substance. If we have errors, in the measurement of mass and of the sizes or, dimensions, we must know what the error will, be in the density of the substance. To make such, estimates, we should learn how errors combine, in various mathematical operations. For this,, we use the following procedure., , 2018-19, , (a) Error of a sum or a difference, Suppose two physical quantities A and B have, measured values A ± ∆A, B ± ∆B respectively, where ∆A and ∆B are their absolute errors. We, wish to find the error ∆Z in the sum, Z = A + B., We have by addition, Z ± ∆Z, = (A ± ∆A) + (B ± ∆B)., The maximum possible error in Z, ∆Z = ∆A + ∆B, For the difference Z = A – B, we have, Z ± ∆ Z = (A ± ∆A) – (B ± ∆B), = (A – B) ± ∆A ± ∆B, , or,, , ± ∆Z = ± ∆A ± ∆B, The maximum value of the error ∆Z is again, ∆A + ∆B., Hence the rule : When two quantities are, added or subtracted, the absolute error in the, final result is the sum of the absolute errors, in the individual quantities., t, , How will you measure the length of a line?, , Example 2.8 The temperatures of two, bodies measured by a thermometer are, t1 = 20 0C ± 0.5 0C and t2 = 50 0C ± 0.5 0C., Calculate the temperature difference and, the error theirin., , Answer t′ = t2–t1 = (50 0C±0.5 0C)– (200C±0.5 0C), t′ = 30 0 C ± 1 0 C, , t, , (b) Error of a product or a quotient, Suppose Z = AB and the measured values of A, and B are A ± ∆A and B ± ∆B. Then, Z ± ∆Z = (A ± ∆A) (B ± ∆B), = AB ± B ∆A ± A ∆B ± ∆A ∆B., Dividing LHS by Z and RHS by AB we have,, 1±(∆Z/Z) = 1 ± (∆A/A) ± (∆B/B) ± (∆A/A)(∆B/B)., Since ∆A and ∆B are small, we shall ignore their, product., Hence the maximum relative error, ∆Z/ Z = (∆A/A) + (∆B/B)., You can easily verify that this is true for division, also., Hence the rule : When two quantities are, multiplied or divided, the relative error in the, result is the sum of the relative errors in the, multipliers.

Page 27 :
UNITS AND MEASUREMENT, , 27, , t, , Answer The percentage error in V is 5% and in, I it is 2%. The total error in R would therefore, be 5% + 2% = 7%., t, Example 2.10 Two resistors of resistances, R1 = 100 ± 3 ohm and R2 = 200 ± 4 ohm are, connected (a) in series, (b) in parallel. Find, the equivalent resistance of the (a) series, combination, (b) parallel combination. Use, for (a) the relation R = R1 + R2, and for (b), , Then,, ∆Z/Z = (∆A/A) + (∆A/A) = 2 (∆A/A)., Hence, the relative error in A2 is two times the, error in A., In general, if Z = Ap Bq/Cr, Then,, ∆Z/Z = p (∆A/A) + q (∆B/B) + r (∆C/C)., Hence the rule : The relative error in a, physical quantity raised to the power k is the, k times the relative error in the individual, quantity., t, , Example 2.9 The resistance R = V/I where, V = (100 ± 5)V and I = (10 ± 0.2)A. Find the, percentage error in R., , t, , and, , R = R1 + R2 = (100 ± 3) ohm + (200 ± 4) ohm, = 300 ± 7 ohm., , Example 2.12 The period of oscillation of, a simple pendulum is, , (b) The equivalent resistance of parallel, combination, , R′ =, , Answer The relative error in Z is ∆Z/Z =, 4(∆A/A) +(1/3) (∆B/B) + (∆C/C) + (3/2) (∆D/D)., t, t, , Answer (a) The equivalent resistance of series, combination, , Example 2.11 Find the relative error in, Z, if Z = A4B1/3/CD3/2., , R1R2, 200, =, R1 + R2, 3 = 66.7 ohm, , T = 2π L/g., Measured value of L is 20.0 cm known to 1, mm accuracy and time for 100 oscillations, of the pendulum is found to be 90 s using, a wrist watch of 1 s resolution. What is the, accuracy in the determination of g ?, , 1 1, 1, Then, from R ′ = R + R, 1, 2, , Answer g = 4π2L/T2, , we get,, , Here, T =, , t, ∆t, ∆T ∆t, =, and ∆T =, . Therefore,, ., n, n, T, t, The errors in both L and t are the least count, errors. Therefore,, (∆g/g) = (∆L/L) + 2(∆T/T ), , ∆R ′ ∆R1 ∆R 2, = 2 + 2, R ′2, R1, R2, , (, , ∆R ′ = R ′2, , ) ∆RR + ( R ′ ) ∆RR, 1, 2, 1, , 2, , 2, , 2, 2, , 2, ,  66.7 ,  66.7 , =,  3+,  4, 100, , ,  200 , = 1.8, Then, R ′ = 66.7 ± 1.8 ohm, (Here, ∆R is expresed as 1.8 instead of 2 to, keep in confirmity with the rules of significant, figures.), t, (c) Error in case of a measured quantity, raised to a power, Suppose Z = A2,, , =, , 2, , 0.1,  1, + 2   = 0.027,  90 , 20.0, , Thus, the percentage error in g is, 100 (∆g/g) = 100(∆L/L) + 2 × 100 (∆T/T ), = 3%, t, 2.7 SIGNIFICANT FIGURES, As discussed above, every measurement, involves errors. Thus, the result of, measurement should be reported in a way that, indicates the precision of measurement., Normally, the reported result of measurement, is a number that includes all digits in the, number that are known reliably plus the first, digit that is uncertain. The reliable digits plus, , 2018-19

Page 28 :
28, , PHYSICS, , the first uncertain digit are known as, significant digits or significant figures. If we, say the period of oscillation of a simple, pendulum is 1.62 s, the digits 1 and 6 are, reliable and certain, while the digit 2 is, uncertain. Thus, the measured value has three, significant figures. The length of an object, reported after measurement to be 287.5 cm has, four significant figures, the digits 2, 8, 7 are, certain while the digit 5 is uncertain. Clearly,, reporting the result of measurement that, includes more digits than the significant digits, is superfluous and also misleading since it would, give a wrong idea about the precision of, measurement., The rules for determining the number of, significant figures can be understood from the, following examples. Significant figures indicate,, as already mentioned, the precision of, measurement which depends on the least count, of the measuring instrument. A choice of, change of different units does not change the, number of significant digits or figures in a, measurement. This important remark makes, most of the following observations clear:, (1) For example, the length 2.308 cm has four, significant figures. But in different units, the, same value can be written as 0.02308 m or 23.08, mm or 23080 µm., All these numbers have the same number of, significant figures (digits 2, 3, 0, 8), namely four., This shows that the location of decimal point is, of no consequence in determining the number, of significant figures., The example gives the following rules :, • All the non-zero digits are significant., • All the zeros between two non-zero digits, are significant, no matter where the, decimal point is, if at all., • If the number is less than 1, the zero(s), on the right of decimal point but to the, left of the first non-zero digit are not, significant. [In 0.00 2308, the underlined, zeroes are not significant]., • The terminal or trailing zero(s) in a, number without a decimal point are not, significant., [Thus 123 m = 12300 cm = 123000 mm has, three significant figures, the trailing zero(s), being not significant.] However, you can also, see the next observation., , 2018-19, , •, , The trailing zero(s) in a number with a, decimal point are significant., [The numbers 3.500 or 0.06900 have four, significant figures each.], , (2) There can be some confusion regarding the, trailing zero(s). Suppose a length is reported to, be 4.700 m. It is evident that the zeroes here, are meant to convey the precision of, measurement and are, therefore, significant. [If, these were not, it would be superfluous to write, them explicitly, the reported measurement, would have been simply 4.7 m]. Now suppose, we change units, then, 4.700 m = 470.0 cm = 4700 mm = 0.004700 km, Since the last number has trailing zero(s) in a, number with no decimal, we would conclude, erroneously from observation (1) above that the, number has two significant figures, while in, fact, it has four significant figures and a mere, change of units cannot change the number of, significant figures., (3) To remove such ambiguities in, determining the number of significant, figures, the best way is to report every, measurement in scientific notation (in the, power of 10). In this notation, every number is, expressed as a × 10b, where a is a number, between 1 and 10, and b is any positive or, negative exponent (or power) of 10. In order to, get an approximate idea of the number, we may, round off the number a to 1 (for a ≤ 5) and to 10, (for 5<a ≤ 10). Then the number can be, expressed approximately as 10b in which the, exponent (or power) b of 10 is called order of, magnitude of the physical quantity. When only, an estimate is required, the quantity is of the, order of 10b. For example, the diameter of the, earth (1.28×107m) is of the order of 107m with, the order of magnitude 7. The diameter of, hydrogen atom (1.06 ×10–10m) is of the order of, 10 –10 m, with the order of magnitude, –10. Thus, the diameter of the earth is 17 orders, of magnitude larger than the hydrogen atom., It is often customary to write the decimal after, the first digit. Now the confusion mentioned in, (a) above disappears :, 4.700 m = 4.700 × 102 cm, = 4.700 × 103 mm = 4.700 × 10–3 km, , The power of 10 is irrelevant to the, determination of significant figures. However, all

Page 29 :
UNITS AND MEASUREMENT, , 29, , zeroes appearing in the base number in the, scientific notation are significant. Each number, in this case has four significant figures., Thus, in the scientific notation, no confusion, arises about the trailing zero(s) in the base, number a. They are always significant., (4) The scientific notation is ideal for reporting, measurement. But if this is not adopted, we use, the rules adopted in the preceding example :, • For a number greater than 1, without any, decimal, the trailing zero(s) are not, significant., • For a number with a decimal, the trailing, zero(s) are significant., (5) The digit 0 conventionally put on the left of a, decimal for a number less than 1 (like 0.1250), is never significant. However, the zeroes at the, end of such number are significant in a, measurement., (6) The multiplying or dividing factors which are, neither rounded numbers nor numbers, representing measured values are exact and, have infinite number of significant digits. For, , d, or s = 2πr, the factor 2 is an, 2, exact number and it can be written as 2.0, 2.00, , example in r =, , or 2.0000 as required. Similarly, in T =, , t, , n is, n, , an exact number., 2.7.1 Rules for Arithmetic Operations with, Significant Figures, The result of a calculation involving approximate, measured values of quantities (i.e. values with, limited number of significant figures) must reflect, the uncertainties in the original measured values., It cannot be more accurate than the original, measured values themselves on which the result, is based. In general, the final result should not, have more significant figures than the original, data from which it was obtained. Thus, if mass of, an object is measured to be, say, 4.237 g (four, significant figures) and its volume is measured to, be 2.51 cm3, then its density, by mere arithmetic, division, is 1.68804780876 g/cm3 upto 11 decimal, places. It would be clearly absurd and irrelevant, to record the calculated value of density to such a, precision when the measurements on which the, value is based, have much less precision. The, , following rules for arithmetic operations with, significant figures ensure that the final result of, a calculation is shown with the precision that is, consistent with the precision of the input, measured values :, (1) In multiplication or division, the final, result should retain as many significant, figures as are there in the original number, with the least significant figures., Thus, in the example above, density should, be reported to three significant figures., D ensity =, , 4.237g, 2.51 cm, , 3, , = 1.69 g cm, , -3, , Similarly, if the speed of light is given as, 3 × 108 m s-1 (one significant figure) and one, year (1y = 365.25 d) has 3.1557 × 107 s (five, significant figures), the light year is 9.47 × 1015 m, (three significant figures)., (2) In addition or subtraction, the final result, should retain as many decimal places as are, there in the number with the least decimal, places., For example, the sum of the numbers, 436.32 g, 227.2 g and 0.301 g by mere arithmetic, addition, is 663.821 g. But the least precise, measurement (227.2 g) is correct to only one, decimal place. The final result should, therefore,, be rounded off to 663.8 g., Similarly, the difference in length can be, expressed as :, 0.307 m – 0.304 m = 0.003 m = 3 × 10–3 m., Note that we should not use the rule (1), applicable for multiplication and division and, write 664 g as the result in the example of, addition and 3.00 × 10–3 m in the example of, subtraction. They do not convey the precision, of measurement properly. For addition and, subtraction, the rule is in terms of decimal, places., 2.7.2 Rounding off the Uncertain Digits, The result of computation with approximate, numbers, which contain more than one, uncertain digit, should be rounded off. The rules, for rounding off numbers to the appropriate, significant figures are obvious in most cases. A, number 2.746 rounded off to three significant, figures is 2.75, while the number 2.743 would, be 2.74. The rule by convention is that the, preceding digit is raised by 1 if the, , 2018-19

Page 30 :
30, , PHYSICS, , 2 π in T = 2π, , L, g, , , have a large (infinite) number, , of significant figures. The value of π =, 3.1415926.... is known to a large number of, significant figures. You may take the value as, 3.142 or 3.14 for π, with limited number of, significant figures as required in specific, cases., Example 2.13 Each side of a cube is, measured to be 7.203 m. What are the, total surface area and the volume of the, cube to appropriate significant figures?, , t, , insignificant digit to be dropped (the, underlined digit in this case) is more than, 5, and is left unchanged if the latter is less, than 5. But what if the number is 2.745 in, which the insignificant digit is 5. Here, the, convention is that if the preceding digit is, even, the insignificant digit is simply, dropped and, if it is odd, the preceding digit, is raised by 1. Then, the number 2.745 rounded, off to three significant figures becomes 2.74. On, the other hand, the number 2.735 rounded off, to three significant figures becomes 2.74 since, the preceding digit is odd., In any involved or complex multi-step, calculation, you should retain, in intermediate, steps, one digit more than the significant digits, and round off to proper significant figures at the, end of the calculation. Similarly, a number, known to be within many significant figures,, such as in 2.99792458 × 108 m/s for the speed, of light in vacuum, is rounded off to an, approximate value 3 × 108 m/s , which is often, employed in computations. Finally, remember, that exact numbers that appear in formulae like, , Example 2.14 5.74 g of a substance, occupies 1.2 cm3. Express its density by, keeping the significant figures in view., , Answer There are 3 significant figures in the, measured mass whereas there are only 2, significant figures in the measured volume., Hence the density should be expressed to only, 2 significant figures., , Density =, , 5.74, g cm−3, 1.2, , = 4.8 g cm--3 ., , t, , 2.7.3 Rules for Determining the Uncertainty, in the Results of Arithmatic, Calculations, The rules for determining the uncertainty or, error in the number/measured quantity in, arithmetic operations can be understood from, the following examples., (1) If the length and breadth of a thin, rectangular sheet are measured, using a metre, scale as 16.2 cm and, 10.1 cm respectively, there, are three significant figures in each, measurement. It means that the length l may, be written as, l = 16.2 ± 0.1 cm, = 16.2 cm ± 0.6 %., Similarly, the breadth b may be written as, b = 10.1 ± 0.1 cm, = 10.1 cm ± 1 %, Then, the error of the product of two (or more), experimental values, using the combination of, errors rule, will be, l b = 163.62 cm2 + 1.6%, , t, , = 163.62 + 2.6 cm2, Answer The number of significant figures in, the measured length is 4. The calculated area, and the volume should therefore be rounded off, to 4 significant figures., Surface area of the cube = 6(7.203)2 m2, = 311.299254 m2, = 311.3 m, , = (7.203)3 m3, = 373.714754 m3, = 373.7 m3, , l b = 164 + 3 cm2, Here 3 cm2 is the uncertainty or error in the, estimation of area of rectangular sheet., (2) If a set of experimental data is specified, to n significant figures, a result obtained by, combining the data will also be valid to n, significant figures., , 2, , Volume of the cube, , This leads us to quote the final result as, , t, , 2018-19, , However, if data are subtracted, the number of, significant figures can be reduced.

Page 31 :
UNITS AND MEASUREMENT, , For example, 12.9 g – 7.06 g, both specified to three, significant figures, cannot properly be evaluated, as 5.84 g but only as 5.8 g, as uncertainties in, subtraction or addition combine in a different, fashion (smallest number of decimal places rather, than the number of significant figures in any of, the number added or subtracted)., (3) The relative error of a value of number, specified to significant figures depends not, only on n but also on the number itself., For example, the accuracy in measurement of, mass 1.02 g is ± 0.01 g whereas another, measurement 9.89 g is also accurate to ± 0.01 g., The relative error in 1.02 g is, = (± 0.01/1.02) × 100 %, = ± 1%, Similarly, the relative error in 9.89 g is, = (± 0.01/9.89) × 100 %, = ± 0.1 %, Finally, remember that intermediate results in, a multi-step computation should be, calculated to one more significant figure in, every measurement than the number of, digits in the least precise measurement., These should be justified by the data and then, the arithmetic operations may be carried out;, otherwise rounding errors can build up. For, example, the reciprocal of 9.58, calculated (after, rounding off) to the same number of significant, figures (three) is 0.104, but the reciprocal of, 0.104 calculated to three significant figures is, 9.62. However, if we had written 1/9.58 = 0.1044, and then taken the reciprocal to three significant, figures, we would have retrieved the original, value of 9.58., This example justifies the idea to retain one, more extra digit (than the number of digits in, the least precise measurement) in intermediate, steps of the complex multi-step calculations in, order to avoid additional errors in the process, of rounding off the numbers., 2.8 DIMENSIONS OF PHYSICAL QUANTITIES, The nature of a physical quantity is described, by its dimensions. All the physical quantities, represented by derived units can be expressed, in terms of some combination of seven, fundamental or base quantities. We shall call, these base quantities as the seven dimensions, of the physical world, which are denoted with, , 31, , square brackets [ ]. Thus, length has the, dimension [L], mass [M], time [T], electric current, [A], thermodynamic temperature [K], luminous, intensity [cd], and amount of substance [mol]., The dimensions of a physical quantity are the, powers (or exponents) to which the base, quantities are raised to represent that, quantity. Note that using the square brackets, [ ] round a quantity means that we are dealing, with ‘the dimensions of’ the quantity., In mechanics, all the physical quantities can, be written in terms of the dimensions [L], [M], and [T]. For example, the volume occupied by, an object is expressed as the product of length,, breadth and height, or three lengths. Hence the, dimensions of volume are [L] × [L] × [L] = [L]3 = [L3]., As the volume is independent of mass and time,, it is said to possess zero dimension in mass [M°],, zero dimension in time [T°] and three, dimensions in length., Similarly, force, as the product of mass and, acceleration, can be expressed as, Force = mass × acceleration, = mass × (length)/(time)2, The dimensions of force are [M] [L]/[T]2 =, [M L T–2]. Thus, the force has one dimension in, mass, one dimension in length, and –2, dimensions in time. The dimensions in all other, base quantities are zero., Note that in this type of representation, the, magnitudes are not considered. It is the quality, of the type of the physical quantity that enters., Thus, a change in velocity, initial velocity,, average velocity, final velocity, and speed are, all equivalent in this context. Since all these, quantities can be expressed as length/time,, their dimensions are [L]/[T] or [L T–1]., 2.9 DIMENSIONAL FORMULAE, DIMENSIONAL EQUATIONS, , AND, , The expression which shows how and which of, the base quantities represent the dimensions, of a physical quantity is called the dimensional, formula of the given physical quantity. For, example, the dimensional formula of the volume, is [M° L3 T°], and that of speed or velocity is, [M° L T-1]. Similarly, [M° L T–2] is the dimensional, formula of acceleration and [M L–3 T°] that of, mass density., An equation obtained by equating a physical, quantity with its dimensional formula is called, the dimensional equation of the physical, , 2018-19

Page 32 :
32, , PHYSICS, , quantity. Thus, the dimensional equations are, the equations, which represent the dimensions, of a physical quantity in terms of the base, quantities. For example, the dimensional, equations of volume [V ], speed [v], force [F ] and, mass density [ρ] may be expressed as, [V] = [M0 L3 T0], [v] = [M0 L T–1], [F] = [M L T–2], [ρ] = [M L–3 T0], The dimensional equation can be obtained, from the equation representing the relations, between the physical quantities. The, dimensional formulae of a large number and, wide variety of physical quantities, derived from, the equations representing the relationships, among other physical quantities and expressed, in terms of base quantities are given in, Appendix 9 for your guidance and ready, reference., 2.10 DIMENSIONAL ANALYSIS AND ITS, APPLICATIONS, The recognition of concepts of dimensions, which, guide the description of physical behaviour is, of basic importance as only those physical, quantities can be added or subtracted which, have the same dimensions. A thorough, understanding of dimensional analysis helps us, in deducing certain relations among different, physical quantities and checking the derivation,, accuracy and dimensional consistency or, homogeneity of various mathematical, expressions. When magnitudes of two or more, physical quantities are multiplied, their units, should be treated in the same manner as, ordinary algebraic symbols. We can cancel, identical units in the numerator and, denominator. The same is true for dimensions, of a physical quantity. Similarly, physical, quantities represented by symbols on both sides, of a mathematical equation must have the same, dimensions., 2.10.1, , Checking the Dimensional, Consistency of Equations, , The magnitudes of physical quantities may be, added together or subtracted from one another, only if they have the same dimensions. In other, words, we can add or subtract similar physical, quantities. Thus, velocity cannot be added to, force, or an electric current cannot be subtracted, , 2018-19, , from the thermodynamic temperature. This, simple principle called the principle of, homogeneity of dimensions in an equation is, extremely useful in checking the correctness of, an equation. If the dimensions of all the terms, are not same, the equation is wrong. Hence, if, we derive an expression for the length (or, distance) of an object, regardless of the symbols, appearing in the original mathematical relation,, when all the individual dimensions are, simplified, the remaining dimension must be, that of length. Similarly, if we derive an equation, of speed, the dimensions on both the sides of, equation, when simplified, must be of length/, time, or [L T–1]., Dimensions are customarily used as a, preliminary test of the consistency of an, equation, when there is some doubt about the, correctness of the equation. However, the, dimensional consistency does not guarantee, correct equations. It is uncertain to the extent, of dimensionless quantities or functions. The, arguments of special functions, such as the, trigonometric, logarithmic and exponential, functions must be dimensionless. A pure, number, ratio of similar physical quantities,, such as angle as the ratio (length/length),, refractive index as the ratio (speed of light in, vacuum/speed of light in medium) etc., has no, dimensions., Now we can test the dimensional consistency, or homogeneity of the equation, , x = x 0 + v0 t + (1/2) a t 2, for the distance x travelled by a particle or body, in time t which starts from the position x0 with, an initial velocity v0 at time t = 0 and has uniform, acceleration a along the direction of motion., The dimensions of each term may be written as, [x] = [L], [x0 ] = [L], [v0 t] = [L T–1] [T], = [L], [(1/2) a t2] = [L T–2] [T2], = [L], As each term on the right hand side of this, equation has the same dimension, namely that, of length, which is same as the dimension of, left hand side of the equation, hence this, equation is a dimensionally correct equation., It may be noted that a test of consistency of, dimensions tells us no more and no less than a

Page 33 :
UNITS AND MEASUREMENT, , Example 2.15 Let us consider an equation, , t, , 1, m v2 = m g h, 2, where m is the mass of the body, v its, velocity, g is the acceleration due to, gravity and h is the height. Check, whether this equation is dimensionally, correct., , Answer The dimensions of LHS are, [M] [L T–1 ]2 = [M] [ L2 T–2], = [M L2 T–2], The dimensions of RHS are, [M][L T–2] [L] = [M][L2 T–2], = [M L2 T–2], The dimensions of LHS and RHS are the same and, hence the equation is dimensionally correct. t, Example 2.16 The SI unit of energy is, J = kg m2 s–2; that of speed v is m s–1 and, of acceleration a is m s–2. Which of the, formulae for kinetic energy (K) given below, can you rule out on the basis of, dimensional arguments (m stands for the, mass of the body) :, (a) K = m2 v3, (b) K = (1/2)mv2, (c) K = ma, (d) K = (3/16)mv2, , t, , (e) K = (1/2)mv2 + ma, Answer Every correct formula or equation must, have the same dimensions on both sides of the, equation. Also, only quantities with the same, physical dimensions can be added or, subtracted. The dimensions of the quantity on, the right side are [M2 L3 T–3] for (a); [M L2 T–2] for, , (b) and (d); [M L T–2] for (c). The quantity on the, right side of (e) has no proper dimensions since, two quantities of different dimensions have been, added. Since the kinetic energy K has the, dimensions of [M L2 T–2], formulas (a), (c) and (e), are ruled out. Note that dimensional arguments, cannot tell which of the two, (b) or (d), is the, correct formula. For this, one must turn to the, actual definition of kinetic energy (see Chapter, 6). The correct formula for kinetic energy is given, by (b)., t, 2.10.2 Deducing Relation among the, Physical Quantities, The method of dimensions can sometimes be, used to deduce relation among the physical, quantities. For this we should know the, dependence of the physical quantity on other, quantities (upto three physical quantities or, linearly independent variables) and consider it, as a product type of the dependence. Let us take, an example., t, , test of consistency of units, but has the, advantage that we need not commit ourselves, to a particular choice of units, and we need not, worry about conversions among multiples and, sub-multiples of the units. It may be borne in, mind that if an equation fails this consistency, test, it is proved wrong, but if it passes, it is, not proved right. Thus, a dimensionally correct, equation need not be actually an exact, (correct) equation, but a dimensionally wrong, (incorrect) or inconsistent equation must be, wrong., , 33, , Example 2.17 Consider a simple, pendulum, having a bob attached to a, string, that oscillates under the action of, the force of gravity. Suppose that the period, of oscillation of the simple pendulum, depends on its length (l), mass of the bob, (m) and acceleration due to gravity (g)., Derive the expression for its time period, using method of dimensions., , Answer The dependence of time period T on, the quantities l, g and m as a product may be, written as :, T = k lx gy mz, where k is dimensionless constant and x, y, and z are the exponents., By considering dimensions on both sides, we, have, [Lo Mo T 1 ]=[L1 ]x [L1 T –2 ]y [M1 ]z, , = Lx+y T–2y Mz, On equating the dimensions on both sides,, we have, x + y = 0; –2y = 1; and z = 0, , 1, 1, ,y = – , z = 0, 2, 2, ½, –½, Then, T = k l g, So that x =, , 2018-19

Page 34 :
34, , PHYSICS, , l, or, T = k, g, Note that value of constant k can not be obtained, by the method of dimensions. Here it does not, matter if some number multiplies the right side, of this formula, because that does not affect its, dimensions., Actually, k = 2π so that T = 2π, , l, g, , t, , Dimensional analysis is very useful in deducing, relations among the interdependent physical, quantities. However, dimensionless constants, cannot be obtained by this method. The method, of dimensions can only test the dimensional, validity, but not the exact relationship between, physical quantities in any equation. It does not, distinguish between the physical quantities, having same dimensions., A number of exercises at the end of this, chapter will help you develop skill in, dimensional analysis., , SUMMARY, 1., , Physics is a quantitative science, based on measurement of physical quantities. Certain, physical quantities have been chosen as fundamental or base quantities (such as length,, mass, time, electric current, thermodynamic temperature, amount of substance, and, luminous intensity)., 2. Each base quantity is defined in terms of a certain basic, arbitrarily chosen but properly, standardised reference standard called unit (such as metre, kilogram, second, ampere,, kelvin, mole and candela). The units for the fundamental or base quantities are called, fundamental or base units., 3. Other physical quantities, derived from the base quantities, can be expressed as a, combination of the base units and are called derived units. A complete set of units,, both fundamental and derived, is called a system of units., 4. The International System of Units (SI) based on seven base units is at present, internationally accepted unit system and is widely used throughout the world., 5. The SI units are used in all physical measurements, for both the base quantities and, the derived quantities obtained from them. Certain derived units are expressed by, means of SI units with special names (such as joule, newton, watt, etc)., 6. The SI units have well defined and internationally accepted unit symbols (such as m for, metre, kg for kilogram, s for second, A for ampere, N for newton etc.)., 7. Physical measurements are usually expressed for small and large quantities in scientific, notation, with powers of 10. Scientific notation and the prefixes are used to simplify, measurement notation and numerical computation, giving indication to the precision, of the numbers., 8. Certain general rules and guidelines must be followed for using notations for physical, quantities and standard symbols for SI units, some other units and SI prefixes for, expressing properly the physical quantities and measurements., 9. In computing any physical quantity, the units for derived quantities involved in the, relationship(s) are treated as though they were algebraic quantities till the desired, units are obtained., 10. Direct and indirect methods can be used for the measurement of physical quantities., In measured quantities, while expressing the result, the accuracy and precision of, measuring instruments along with errors in measurements should be taken into account., 11. In measured and computed quantities proper significant figures only should be retained., Rules for determining the number of significant figures, carrying out arithmetic, operations with them, and ‘rounding off ‘ the uncertain digits must be followed., 12. The dimensions of base quantities and combination of these dimensions describe the, nature of physical quantities. Dimensional analysis can be used to check the dimensional, consistency of equations, deducing relations among the physical quantities, etc. A, dimensionally consistent equation need not be actually an exact (correct) equation,, but a dimensionally wrong or inconsistent equation must be wrong., , 2018-19

Page 35 :
UNITS AND MEASUREMENT, , 35, , EXERCISES, Note : In stating numerical answers, take care of significant figures., 2.1 Fill in the blanks, (a) The volume of a cube of side 1 cm is equal to .....m3, (b) The surface area of a solid cylinder of radius 2.0 cm and height 10.0 cm is equal to, ...(mm)2, (c) A vehicle moving with a speed of 18 km h–1 covers....m in 1 s, (d) The relative density of lead is 11.3. Its density is ....g cm–3 or ....kg m–3., 2.2, , Fill in the blanks by suitable conversion of units, (a) 1 kg m2 s–2 = ....g cm2 s–2, (b) 1 m = ..... ly, (c) 3.0 m s–2 = .... km h–2, (d) G = 6.67 × 10–11 N m2 (kg)–2 = .... (cm)3 s–2 g–1., , A calorie is a unit of heat (energy in transit) and it equals about 4.2 J where 1J =, 1 kg m2 s–2. Suppose we employ a system of units in which the unit of mass equals α, kg, the unit of length equals β m, the unit of time is γ s. Show that a calorie has a, magnitude 4.2 α –1 β –2 γ 2 in terms of the new units., 2.4 Explain this statement clearly :, “To call a dimensional quantity ‘large’ or ‘small’ is meaningless without specifying a, standard for comparison”. In view of this, reframe the following statements wherever, necessary :, (a) atoms are very small objects, (b) a jet plane moves with great speed, (c) the mass of Jupiter is very large, (d) the air inside this room contains a large number of molecules, (e) a proton is much more massive than an electron, (f) the speed of sound is much smaller than the speed of light., 2.5 A new unit of length is chosen such that the speed of light in vacuum is unity. What, is the distance between the Sun and the Earth in terms of the new unit if light takes, 8 min and 20 s to cover this distance ?, 2.6 Which of the following is the most precise device for measuring length :, (a) a vernier callipers with 20 divisions on the sliding scale, (b) a screw gauge of pitch 1 mm and 100 divisions on the circular scale, (c) an optical instrument that can measure length to within a wavelength of light ?, 2.7 A student measures the thickness of a human hair by looking at it through a, microscope of magnification 100. He makes 20 observations and finds that the average, width of the hair in the field of view of the microscope is 3.5 mm. What is the, estimate on the thickness of hair ?, 2.8 Answer the following :, (a)You are given a thread and a metre scale. How will you estimate the diameter of, the thread ?, (b)A screw gauge has a pitch of 1.0 mm and 200 divisions on the circular scale. Do, you think it is possible to increase the accuracy of the screw gauge arbitrarily by, increasing the number of divisions on the circular scale ?, (c) The mean diameter of a thin brass rod is to be measured by vernier callipers. Why, is a set of 100 measurements of the diameter expected to yield a more reliable, estimate than a set of 5 measurements only ?, 2.9 The photograph of a house occupies an area of 1.75 cm2 on a 35 mm slide. The slide, is projected on to a screen, and the area of the house on the screen is 1.55 m2. What, is the linear magnification of the projector-screen arrangement., 2.10 State the number of significant figures in the following :, (a) 0.007 m2, (b) 2.64 × 1024 kg, (c) 0.2370 g cm–3, 2.3, , 2018-19

Page 36 :
36, , PHYSICS, , (d) 6.320 J, (e) 6.032 N m–2, (f) 0.0006032 m2, 2.11 The length, breadth and thickness of a rectangular sheet of metal are 4.234 m, 1.005 m,, and 2.01 cm respectively. Give the area and volume of the sheet to correct significant, figures., 2.12 The mass of a box measured by a grocer’s balance is 2.300 kg. Two gold pieces of, masses 20.15 g and 20.17 g are added to the box. What is (a) the total mass of the, box, (b) the difference in the masses of the pieces to correct significant figures ?, 2.13 A physical quantity P is related to four observables a, b, c and d as follows :, P = a 3 b 2/, , (, , c d, , ), , The percentage errors of measurement in a, b, c and d are 1%, 3%, 4% and 2%,, respectively. What is the percentage error in the quantity P ? If the value of P calculated, using the above relation turns out to be 3.763, to what value should you round off, the result ?, 2.14 A book with many printing errors contains four different formulas for the displacement, y of a particle undergoing a certain periodic motion :, (a) y = a sin 2π t/T, (b) y = a sin vt, (c) y = (a/T) sin t/a, (d) y = (a 2 ) (sin 2 πt / T + cos 2 πt / T ), (a = maximum displacement of the particle, v = speed of the particle. T = time-period, of motion). Rule out the wrong formulas on dimensional grounds., 2.15 A famous relation in physics relates ‘moving mass’ m to the ‘rest mass’ mo of a, particle in terms of its speed v and the speed of light, c. (This relation first arose as, a consequence of special relativity due to Albert Einstein). A boy recalls the relation, almost correctly but forgets where to put the constant c. He writes :, , m=, , m0, , (1 − v ), , 2 1/2, , ., , Guess where to put the missing c., 2.16 The unit of length convenient on the atomic scale is known as an angstrom and is, denoted by Å: 1 Å = 10–10 m. The size of a hydrogen atom is about 0.5 Å. What is the, total atomic volume in m3 of a mole of hydrogen atoms ?, 2.17 One mole of an ideal gas at standard temperature and pressure occupies 22.4 L, (molar volume). What is the ratio of molar volume to the atomic volume of a mole of, hydrogen ? (Take the size of hydrogen molecule to be about 1 Å). Why is this ratio, so large ?, 2.18 Explain this common observation clearly : If you look out of the window of a fast, moving train, the nearby trees, houses etc. seem to move rapidly in a direction opposite, to the train’s motion, but the distant objects (hill tops, the Moon, the stars etc.), seem to be stationary. (In fact, since you are aware that you are moving, these, distant objects seem to move with you)., 2.19 The principle of ‘parallax’ in section 2.3.1 is used in the determination of distances, of very distant stars. The baseline AB is the line joining the Earth’s two locations six, months apart in its orbit around the Sun. That is, the baseline is about the diameter, of the Earth’s orbit ≈ 3 × 1011m. However, even the nearest stars are so distant that, with such a long baseline, they show parallax only of the order of 1” (second) of arc, or so. A parsec is a convenient unit of length on the astronomical scale. It is the, distance of an object that will show a parallax of 1” (second of arc) from opposite, ends of a baseline equal to the distance from the Earth to the Sun. How much is a, parsec in terms of metres ?, , 2018-19

Page 37 :
UNITS AND MEASUREMENT, , 37, , 2.20 The nearest star to our solar system is 4.29 light years away. How much is this, distance in terms of parsecs? How much parallax would this star (named Alpha, Centauri) show when viewed from two locations of the Earth six months apart in its, orbit around the Sun ?, 2.21 Precise measurements of physical quantities are a need of science. For example, to, ascertain the speed of an aircraft, one must have an accurate method to find its, positions at closely separated instants of time. This was the actual motivation behind, the discovery of radar in World War II. Think of different examples in modern science, where precise measurements of length, time, mass etc. are needed. Also, wherever, you can, give a quantitative idea of the precision needed., 2.22 Just as precise measurements are necessary in science, it is equally important to be, able to make rough estimates of quantities using rudimentary ideas and common, observations. Think of ways by which you can estimate the following (where an, estimate is difficult to obtain, try to get an upper bound on the quantity) :, (a) the total mass of rain-bearing clouds over India during the Monsoon, (b) the mass of an elephant, (c) the wind speed during a storm, (d) the number of strands of hair on your head, (e) the number of air molecules in your classroom., 2.23 The Sun is a hot plasma (ionized matter) with its inner core at a temperature exceeding, 10 7 K, and its outer surface at a temperature of about 6000 K. At these high, temperatures, no substance remains in a solid or liquid phase. In what range do you, expect the mass density of the Sun to be, in the range of densities of solids and, liquids or gases ? Check if your guess is correct from the following data : mass of the, Sun = 2.0 ×1030 kg, radius of the Sun = 7.0 × 108 m., 2.24 When the planet Jupiter is at a distance of 824.7 million kilometers from the Earth,, its angular diameter is measured to be 35.72” of arc. Calculate the diameter of, Jupiter., Additional Exercises, 2.25 A man walking briskly in rain with speed v must slant his umbrella forward making, an angle θ with the vertical. A student derives the following relation between θ and, v : tan θ = v and checks that the relation has a correct limit: as v → 0, θ →0, as, expected. (We are assuming there is no strong wind and that the rain falls vertically, for a stationary man). Do you think this relation can be correct ? If not, guess the, correct relation., 2.26 It is claimed that two cesium clocks, if allowed to run for 100 years, free from any, disturbance, may differ by only about 0.02 s. What does this imply for the accuracy, of the standard cesium clock in measuring a time-interval of 1 s ?, 2.27 Estimate the average mass density of a sodium atom assuming its size to be about, 2.5 Å. (Use the known values of Avogadro’s number and the atomic mass of sodium)., Compare it with the mass density of sodium in its crystalline phase : 970 kg m–3. Are, the two densities of the same order of magnitude ? If so, why ?, 2.28 The unit of length convenient on the nuclear scale is a fermi : 1 f = 10–15 m. Nuclear, sizes obey roughly the following empirical relation :, r = r0 A1/3, where r is the radius of the nucleus, A its mass number, and ro is a constant equal to, about, 1.2 f. Show that the rule implies that nuclear mass density is nearly constant, for different nuclei. Estimate the mass density of sodium nucleus. Compare it with, the average mass density of a sodium atom obtained in Exercise. 2.27., 2.29 A LASER is a source of very intense, monochromatic, and unidirectional beam of, light. These properties of a laser light can be exploited to measure long distances., The distance of the Moon from the Earth has been already determined very precisely, using a laser as a source of light. A laser light beamed at the Moon takes 2.56 s to, , 2018-19

Page 38 :
38, , PHYSICS, , return after reflection at the Moon’s surface. How much is the radius of the lunar, orbit around the Earth ?, 2.30 A SONAR (sound navigation and ranging) uses ultrasonic waves to detect and locate, objects under water. In a submarine equipped with a SONAR, the time delay between, generation of a probe wave and the reception of its echo after reflection from an, enemy submarine is found to be 77.0 s. What is the distance of the enemy submarine?, (Speed of sound in water = 1450 m s–1)., 2.31 The farthest objects in our Universe discovered by modern astronomers are so distant, that light emitted by them takes billions of years to reach the Earth. These objects, (known as quasars) have many puzzling features, which have not yet been satisfactorily, explained. What is the distance in km of a quasar from which light takes 3.0 billion, years to reach us ?, 2.32 It is a well known fact that during a total solar eclipse the disk of the moon almost, completely covers the disk of the Sun. From this fact and from the information you, can gather from examples 2.3 and 2.4, determine the approximate diameter of the, moon., 2.33 A great physicist of this century (P.A.M. Dirac) loved playing with numerical values of, Fundamental constants of nature. This led him to an interesting observation. Dirac, found that from the basic constants of atomic physics (c, e, mass of electron, mass of, proton) and the gravitational constant G, he could arrive at a number with the, dimension of time. Further, it was a very large number, its magnitude being close to, the present estimate on the age of the universe (~15 billion years). From the table of, fundamental constants in this book, try to see if you too can construct this number, (or any other interesting number you can think of ). If its coincidence with the age of, the universe were significant, what would this imply for the constancy of fundamental, constants?, , 2018-19

Page 39 :
CHAPTER THREE, , MOTION, , IN A, , STRAIGHT LINE, , 3.1 INTRODUCTION, , 3.1 Introduction, 3.2 Position, path length and, displacement, , 3.3 Average velocity and average, speed, , 3.4 Instantaneous velocity and, speed, , 3.5 Acceleration, 3.6 Kinematic equations for, uniformly accelerated motion, , 3.7 Relative velocity, Summary, Points to ponder, Exercises, Additional exercises, Appendix 3.1, , Motion is common to everything in the universe. We walk,, run and ride a bicycle. Even when we are sleeping, air moves, into and out of our lungs and blood flows in arteries and, veins. We see leaves falling from trees and water flowing, down a dam. Automobiles and planes carry people from one, place to the other. The earth rotates once every twenty-four, hours and revolves round the sun once in a year. The sun, itself is in motion in the Milky Way, which is again moving, within its local group of galaxies., Motion is change in position of an object with time. How, does the position change with time ? In this chapter, we shall, learn how to describe motion. For this, we develop the, concepts of velocity and acceleration. We shall confine, ourselves to the study of motion of objects along a straight, line, also known as rectilinear motion. For the case of, rectilinear motion with uniform acceleration, a set of simple, equations can be obtained. Finally, to understand the relative, nature of motion, we introduce the concept of relative velocity., In our discussions, we shall treat the objects in motion as, point objects. This approximation is valid so far as the size, of the object is much smaller than the distance it moves in a, reasonable duration of time. In a good number of situations, in real-life, the size of objects can be neglected and they can, be considered as point-like objects without much error., In Kinematics, we study ways to describe motion without, going into the causes of motion. What causes motion, described in this chapter and the next chapter forms the, subject matter of Chapter 5., 3.2 POSITION, PATH LENGTH AND DISPLACEMENT, Earlier you learnt that motion is change in position of an, object with time. In order to specify position, we need to use, a reference point and a set of axes. It is convenient to choose, , 2018-19

Page 40 :
40, , PHYSICS, , a rectangular coordinate system consisting of, three mutually perpenducular axes, labelled X-,, Y-, and Z- axes. The point of intersection of these, three axes is called origin (O) and serves as the, reference point. The coordinates (x, y. z) of an, object describe the position of the object with, respect to this coordinate system. To measure, time, we position a clock in this system. This, coordinate system along with a clock constitutes, a frame of reference., If one or more coordinates of an object change, with time, we say that the object is in motion., Otherwise, the object is said to be at rest with, respect to this frame of reference., The choice of a set of axes in a frame of, reference depends upon the situation. For, example, for describing motion in one dimension,, we need only one axis. To describe motion in, two/three dimensions, we need a set of two/, three axes., Description of an event depends on the frame, of reference chosen for the description. For, example, when you say that a car is moving on, a road, you are describing the car with respect, to a frame of reference attached to you or to the, ground. But with respect to a frame of reference, attached with a person sitting in the car, the, car is at rest., To describe motion along a straight line, we, can choose an axis, say X-axis, so that it, coincides with the path of the object. We then, measure the position of the object with reference, to a conveniently chosen origin, say O, as shown, in Fig. 3.1. Positions to the right of O are taken, as positive and to the left of O, as negative., Following this convention, the position, coordinates of point P and Q in Fig. 3.1 are +360, m and +240 m. Similarly, the position coordinate, of point R is –120 m., Path length, Consider the motion of a car along a straight, line. We choose the x-axis such that it coincides, , with the path of the car’s motion and origin of, the axis as the point from where the car started, moving, i.e. the car was at x = 0 at t = 0 (Fig. 3.1)., Let P, Q and R represent the positions of the car, at different instants of time. Consider two cases, of motion. In the first case, the car moves from, O to P. Then the distance moved by the car is, OP = +360 m. This distance is called the path, length traversed by the car. In the second, case, the car moves from O to P and then moves, back from P to Q. During this course of motion,, the path length traversed is OP + PQ = + 360 m, + (+120 m) = + 480 m. Path length is a scalar, quantity — a quantity that has a magnitude, only and no direction (see Chapter 4)., Displacement, It is useful to define another quantity, displacement as the change in position. Let, x1 and x2 be the positions of an object at time t1, and t2. Then its displacement, denoted by ∆x, in, time ∆t = (t2 - t1), is given by the difference, between the final and initial positions :, ∆x = x2 – x1, (We use the Greek letter delta (∆) to denote a, change in a quantity.), If x2 > x1, ∆x is positive; and if x2 < x1, ∆x is, negative., Displacement has both magnitude and, direction. Such quantities are represented by, vectors. You will read about vectors in the next, chapter. Presently, we are dealing with motion, along a straight line (also called rectilinear, motion) only. In one-dimensional motion, there, are only two directions (backward and forward,, upward and downward) in which an object can, move, and these two directions can easily be, specified by + and – signs. For example,, displacement of the car in moving from O to P is :, ∆x = x2 – x1 = (+360 m) – 0 m = +360 m, The displacement has a magnitude of 360 m and, is directed in the positive x direction as indicated, by the + sign. Similarly, the displacement of the, car from P to Q is 240 m – 360 m = – 120 m. The, , Fig. 3.1 x-axis, origin and positions of a car at different times., , 2018-19

Page 41 :
MOTION IN A STRAIGHT LINE, , 41, , negative sign indicates the direction of, displacement. Thus, it is not necessary to use, vector notation for discussing motion of objects, in one-dimension., The magnitude of displacement may or may, not be equal to the path length traversed by, an object. For example, for motion of the car, from O to P, the path length is +360 m and the, displacement is +360 m. In this case, the, magnitude of displacement (360 m) is equal to, the path length (360 m). But consider the motion, of the car from O to P and back to Q. In this, case, the path length = (+360 m) + (+120 m) = +, 480 m. However, the displacement = (+240 m) –, (0 m) = + 240 m. Thus, the magnitude of, displacement (240 m) is not equal to the path, length (480 m)., The magnitude of the displacement for a, course of motion may be zero but the, corresponding path length is not zero. For, example, if the car starts from O, goes to P and, , then returns to O, the final position coincides, with the initial position and the displacement, is zero. However, the path length of this journey, is OP + PO = 360 m + 360 m = 720 m., Motion of an object can be represented by a, position-time graph as you have already learnt, about it. Such a graph is a powerful tool to, represent and analyse different aspects of, motion of an object. For motion along a straight, line, say X-axis, only x-coordinate varies with, time and we have an x-t graph. Let us first, consider the simple case in which an object is, stationary, e.g. a car standing still at x = 40 m., The position-time graph is a straight line parallel, to the time axis, as shown in Fig. 3.2(a)., If an object moving along the straight line, covers equal distances in equal intervals of, time, it is said to be in uniform motion along a, straight line. Fig. 3.2(b) shows the position-time, graph of such a motion., , Fig. 3.2 Position-time graph of (a) stationary object, and (b) an object in uniform motion., , #, x, (m), , t (s) ž, Fig. 3.3 Position-time graph of a car., , 2018-19

Page 42 :
42, , PHYSICS, , Now, let us consider the motion of a car that, starts from rest at time t = 0 s from the origin O, and picks up speed till t = 10 s and thereafter, moves with uniform speed till t = 18 s. Then the, brakes are applied and the car stops at, t = 20 s and x = 296 m. The position-time graph, for this case is shown in Fig. 3.3. We shall refer, to this graph in our discussion in the following, sections., 3.3, , AVERAGE VELOCITY AND AVERAGE, SPEED, , When an object is in motion, its position, changes with time. But how fast is the position, changing with time and in what direction? To, describe this, we define the quantity average, velocity. Average velocity is defined as the, change in position or displacement (∆x) divided, by the time intervals (∆t), in which the, displacement occurs :, v=, , x 2 − x1, t 2 − t1, , =, , ∆x, , Consider the motion of the car in Fig. 3.3. The, portion of the x-t graph between t = 0 s and t = 8, s is blown up and shown in Fig. 3.4. As seen, from the plot, the average velocity of the car, between time t = 5 s and t = 7 s is :, v=, , ( 27.4 − 10.0 ) m, x 2 − x1, =, = 8.7 m s –1, t 2 − t1, (7 − 5 ) s, , Geometrically, this is the slope of the straight, line P1P2 connecting the initial position P1 to, the final position P2 as shown in Fig. 3.4., The average velocity can be positive or negative, depending upon the sign of the displacement. It, is zero if the displacement is zero. Fig. 3.5 shows, the x-t graphs for an object, moving with positive, velocity (Fig. 3.5a), moving with negative velocity, (Fig. 3.5b) and at rest (Fig. 3.5c)., , (3.1), , ∆t, , where x2 and x1 are the positions of the object, at time t2and t1, respectively. Here the bar over, the symbol for velocity is a standard notation, used to indicate an average quantity. The SI, unit for velocity is m/s or m s–1, although km h–1, is used in many everyday applications., Like displacement, average velocity is also a, vector quantity. But as explained earlier, for, motion in a straight line, the directional aspect, of the vector can be taken care of by + and –, signs and we do not have to use the vector, notation for velocity in this chapter., , Fig. 3.5 Position-time graph for an object (a) moving, with positive velocity, (b) moving with, negative velocity, and (c) at rest., , Average velocity as defined above involves, only the displacement of the object. We have seen, earlier that the magnitude of displacement may, be different from the actual path length. To, describe the rate of motion over the actual path,, we introduce another quantity called average, speed., Average speed is defined as the total path, length travelled divided by the total time, interval during which the motion has taken, place :, Average speed =, , Total path length, Total time interval, , Fig. 3.4 The average velocity is the slope of line P1P2., , 2018-19, , (3.2), , Average speed has obviously the same unit, (m s–1) as that of velocity. But it does not tell us, in what direction an object is moving. Thus, it, is always positive (in contrast to the average, velocity which can be positive or negative). If the, motion of an object is along a straight line and, in the same direction, the magnitude of, displacement is equal to the total path length., In that case, the magnitude of average velocity

Page 43 :
MOTION IN A STRAIGHT LINE, , 43, , is equal to the average speed. This is not always, the case, as you will see in the following example., Example 3.1 A car is moving along a, straight line, say OP in Fig. 3.1. It moves, from O to P in 18 s and returns from P to Q, in 6.0 s. What are the average velocity, and average speed of the car in going (a), from O to P ? and (b) from O to P and back, to Q ?, , t, , Answer, , (a), , 3.4 INSTANTANEOUS VELOCITY AND SPEED, The average velocity tells us how fast an object, has been moving over a given time interval but, does not tell us how fast it moves at different, instants of time during that interval. For this,, we define instantaneous velocity or simply, velocity v at an instant t., The velocity at an instant is defined as the, limit of the average velocity as the time interval, ∆t becomes infinitesimally small. In other words,, v =, , Average velocity =, , lim, ∆t → 0, , Displacement, Time interval, =, , ∆x, , (3.3a), , ∆t, , dx, , (3.3b), , dt, , + 360 m, v=, = + 20 m s −1, 18 s, Average speed =, , Path length, Time interval, , =, , 360 m, = 20 m s −1, 18 s, , Thus, in this case the average speed is equal to, the magnitude of the average velocity., (b) In this case,, Average velocity =, , Displacement, +240 m, =, Time interval, (18 + 6.0) s, , =+10 m s-1, Average speed =, =, , Path length, OP + PQ, =, Time interval, ∆t, , (360 +120 ), 24 s, , m, , lim, , where the symbol ∆t →0 stands for the operation, of taking limit as ∆tg0 of the quantity on its, right. In the language of calculus, the quantity, on the right hand side of Eq. (3.3a) is the, differential coefficient of x with respect to t and, is denoted by, , dx, , dt, , (see Appendix 3.1). It is the, , rate of change of position with respect to time,, at that instant., We can use Eq. (3.3a) for obtaining the value, of velocity at an instant either graphically or, numerically. Suppose that we want to obtain, graphically the value of velocity at time t = 4 s, (point P) for the motion of the car represented, in Fig. 3.3. The figure has been redrawn in, Fig. 3.6 choosing different scales to facilitate the, , = 20 m s-1, , Thus, in this case the average speed is not equal, to the magnitude of the average velocity. This, happens because the motion here involves, change in direction so that the path length is, greater than the magnitude of displacement., This shows that speed is, in general, greater, than the magnitude of the velocity., t, If the car in Example 3.1 moves from O to P, and comes back to O in the same time interval,, average speed is 20 m/s but the average velocity, is zero !, , Fig. 3.6 Determining velocity from position-time, graph. Velocity at t = 4 s is the slope of the, tangent to the graph at that instant., , 2018-19

Page 44 :
44, , PHYSICS, , calculation. Let us take ∆t = 2 s centred at, t = 4 s. Then, by the definition of the average, velocity, the slope of line P1P2 ( Fig. 3.6) gives, the value of average velocity over the interval, 3 s to 5 s. Now, we decrease the value of ∆t from, 2 s to 1 s. Then line P1P2 becomes Q1Q2 and its, slope gives the value of the average velocity over, the interval 3.5 s to 4.5 s. In the limit ∆t → 0,, the line P1P2 becomes tangent to the positiontime curve at the point P and the velocity at t =, 4 s is given by the slope of the tangent at that, point. It is difficult to show this process, graphically. But if we use numerical method, to obtain the value of the velocity, the, meaning of the limiting process becomes, clear., For, the, graph, shown, in, Fig. 3.6, x = 0.08 t3. Table 3.1 gives the value of, ∆x/∆t calculated for ∆t equal to 2.0 s, 1.0 s, 0.5, s, 0.1 s and 0.01 s centred at t = 4.0 s. The, second and third columns give the value of t1=, , ∆t , t −, , , 2 , , , , and t 2 =  t +, , , ∆t , , 2 , , and the fourth and, , the fifth columns give the corresponding values, 3, , of x, i.e. x (t1) = 0.08 t1 and x (t2) = 0.08 t 23 . The, sixth column lists the difference ∆x = x (t2) – x, (t1) and the last column gives the ratio of ∆x and, ∆t, i.e. the average velocity corresponding to the, value of ∆t listed in the first column., We see from Table 3.1 that as we decrease, the value of ∆t from 2.0 s to 0.010 s, the value of, the average velocity approaches the limiting, value 3.84 m s–1 which is the value of velocity at, t = 4.0 s, i.e. the value of, , dx, , dt, , at t = 4.0 s. In this, , manner, we can calculate velocity at each, , instant for motion of the car shown in Fig. 3.3., For this case, the variation of velocity with time, is found to be as shown in Fig. 3.7., , Fig. 3.7 Velocity–time graph corresponding to motion, shown in Fig. 3.3., , The graphical method for the determination, of the instantaneous velocity is always not a, convenient method. For this, we must carefully, plot the position–time graph and calculate the, value of average velocity as ∆t becomes smaller, and smaller. It is easier to calculate the value, of velocity at different instants if we have data, of positions at different instants or exact, expression for the position as a function of time., Then, we calculate ∆x/∆t from the data for, decreasing the value of ∆t and find the limiting, value as we have done in Table 3.1 or use, differential calculus for the given expression and, dx, , calculate, , at different instants as done in, , the following example., , Table 3.1 Limiting value of, , 2018-19, , dt, , ∆x, at t = 4 s, ∆t

Page 45 :
MOTION IN A STRAIGHT LINE, , 45, , t, , Answer In notation of differential calculus, the, velocity is, v=, , dx, , =, , dt, , At t = 0 s,, v = 10 m s-1 ., , d, dt, , ( a + bt ) = 2b t = 5.0 t m s, 2, , v = 0 m s–1, , and at, , -1, , t = 2.0 s,, , x ( 4.0 ) − x (2.0 ), 4.0 − 2.0, a + 16b – a – 4b, =, = 6.0 × b, 2.0, , Average velocity =, , t, From Fig. 3.7, we note that during the period, t =10 s to 18 s the velocity is constant. Between, period t =18 s to t = 20 s, it is uniformly, decreasing and during the period t = 0 s to t, = 10 s, it is increasing. Note that for uniform, motion, velocity is the same as the average, velocity at all instants., Instantaneous speed or simply speed is the, magnitude of velocity. For example, a velocity of, + 24.0 m s–1 and a velocity of – 24.0 m s–1 — both, have an associated speed of 24.0 m s-1. It should, be noted that though average speed over a finite, interval of time is greater or equal to the, magnitude of the average velocity,, instantaneous speed at an instant is equal to, the magnitude of the instantaneous velocity at, that instant. Why so ?, = 6.0 × 2.5 = 15 m s-1, , This led to the concept of acceleration as the rate, of change of velocity with time., The average acceleration a over a time, interval is defined as the change of velocity, divided by the time interval :, a = v 2 – v1 = ∆v, t 2 – t1, ∆t, , (3.4), , where v2 and v1 are the instantaneous velocities, or simply velocities at time t2 and t1 . It is the, average change of velocity per unit time. The SI, unit of acceleration is m s–2 ., On a plot of velocity versus time, the average, acceleration is the slope of the straight line, connecting the points corresponding to (v2, t2), and (v 1 , t 1 ). The average acceleration, for, velocity-time graph shown in Fig. 3.7 for, different time intervals 0 s - 10 s, 10 s – 18 s,, and 18 s – 20 s are :, 0 s - 10 s, , a=(, , 10 s - 18 s, , 18 s - 20 s, , 24 – 0) m s –1, = 2.4 m s –2, (10 – 0) s, , a=(, , 24 – 24) m s –1, = 0 m s –2, 18, –, 10, s, (, ), , a=(, , 0 – 24 ) m s –1, = – 12 m s –2, (20 – 18) s, , a (m s–2), , Example 3.2, The position of an object, moving along x-axis is given by x = a + bt2, where a = 8.5 m, b = 2.5 m s–2 and t is, measured in seconds. What is its velocity at, t = 0 s and t = 2.0 s. What is the average, velocity between t = 2.0 s and t = 4.0 s ?, , 3.5 ACCELERATION, The velocity of an object, in general, changes, during its course of motion. How to describe this, change? Should it be described as the rate of, change in velocity with distance or with time ?, This was a problem even in Galileo’s time. It was, first thought that this change could be described, by the rate of change of velocity with distance., But, through his studies of motion of freely falling, objects and motion of objects on an inclined, plane, Galileo concluded that the rate of change, of velocity with time is a constant of motion for, all objects in free fall. On the other hand, the, change in velocity with distance is not constant, – it decreases with the increasing distance of fall., , Fig. 3.8 Acceleration as a function of time for motion, represented in Fig. 3.3., , Instantaneous acceleration is defined in the same, way as the instantaneous velocity :, , ∆ v dv, =, (3.5), ∆t →0 ∆t, dt, The acceleration at an instant is the slope of, the tangent to the v–t curve at that instant. For, the v–t curve shown in Fig. 3.7, we can obtain, acceleration at every instant of time. The, resulting a – t curve is shown in Fig. 3.8. We see, a = lim, , 2018-19

Page 46 :
46, , PHYSICS, , that the acceleration is nonuniform over the, period 0 s to 10 s. It is zero between 10 s and, 18 s and is constant with value –12 m s –2, between 18 s and 20 s. When the acceleration, is uniform, obviously, it equals the average, acceleration over that period., Since velocity is a quantity having both, magnitude and direction, a change in velocity, may involve either or both of these factors., Acceleration, therefore, may result from a, change in speed (magnitude), a change in, direction or changes in both. Like velocity,, acceleration can also be positive, negative or, zero. Position-time graphs for motion with, positive, negative and zero acceleration are, shown in Figs. 3.9 (a), (b) and (c), respectively., Note that the graph curves upward for positive, acceleration; downward for negative, acceleration and it is a straight line for zero, acceleration. As an exercise, identify in Fig. 3.3,, the regions of the curve that correspond to these, three cases., Although acceleration can vary with time,, our study in this chapter will be restricted to, motion with constant acceleration. In this case,, the average acceleration equals the constant, value of acceleration during the interval. If the, velocity of an object is vo at t = 0 and v at time t,, we have, , a=, , v − v0, or, v = v0 + a t, t −0, , (b) An object is moving in positive direction, with a negative acceleration, for example,, motion of the car in Fig 3.3 between, t = 18 s and 20 s., (c) An object is moving in negative direction, with a negative acceleration, for example, the motion of a car moving from O in Fig., 3.1 in negative x-direction with, increasing speed., (d) An object is moving in positive direction, till time t1, and then turns back with the, same negative acceleration, for example, the motion of a car from point O to point, Q in Fig. 3.1 till time t1 with decreasing, speed and turning back and moving with, the same negative acceleration., An interesting feature of a velocity-time graph, for any moving object is that the area under the, curve represents the displacement over a, given time interval. A general proof of this, , (3.6), , Fig. 3.9 Position-time graph for motion with, (a) positive acceleration; (b) negative, acceleration, and (c) zero acceleration., , Let us see how velocity-time graph looks like, for some simple cases. Fig. 3.10 shows velocitytime graph for motion with constant acceleration, for the following cases :, (a) An object is moving in a positive direction, with a positive acceleration, for example, the motion of the car in Fig. 3.3 between, t = 0 s and t = 10 s., , 2018-19, , Fig. 3.10 Velocity–time graph for motions with, constant acceleration. (a) Motion in positive, direction with positive acceleration,, (b) Motion in positive direction with, negative acceleration, (c) Motion in negative, direction with negative acceleration,, (d) Motion of an object with negative, acceleration that changes direction at time, t1. Between times 0 to t1, its moves in, positive x - direction and between t1 and, t2 it moves in the opposite direction.

Page 47 :
MOTION IN A STRAIGHT LINE, , 47, , statement requires use of calculus. We can,, however, see that it is true for the simple case of, an object moving with constant velocity u. Its, velocity-time graph is as shown in Fig. 3.11., , =, , 1, (v –v0 ) t + v0t, 2, , Fig. 3.11 Area under v–t curve equals displacement, of the object over a given time interval., , The v-t curve is a straight line parallel to the, time axis and the area under it between t = 0, and t = T is the area of the rectangle of height u, and base T. Therefore, area = u × T = uT which, is the displacement in this time interval. How, come in this case an area is equal to a distance?, Think! Note the dimensions of quantities on, the two coordinate axes, and you will arrive at, the answer., Note that the x-t, v-t, and a-t graphs shown, in several figures in this chapter have sharp, kinks at some points implying that the, functions are not differentiable at these, points. In any realistic situation, the, functions will be differentiable at all points, and the graphs will be smooth., What this means physically is that, acceleration and velocity cannot change, values abruptly at an instant. Changes are, always continuous., , Fig. 3.12 Area under v-t curve for an object with, uniform acceleration., , As explained in the previous section, the area, under v-t curve represents the displacement., Therefore, the displacement x of the object is :, x =, , v = v0 + at, , (3.6), , (3.7), , v − v0 = a t, , But, , 1, a t 2 + v 0t, 2, 1, x = v0t + at 2, or,, 2, Equation (3.7) can also be written as, Therefore, x =, , x=, , v + v0, t = vt, 2, , (3.8), , (3.9a), , where,, , 3.6 KINEMATIC, EQUATIONS, FOR, UNIFORMLY ACCELERATED MOTION, For uniformly accelerated motion, we can derive, some simple equations that relate displacement, (x), time taken (t), initial velocity (v 0), final, velocity (v) and acceleration (a). Equation (3.6), already obtained gives a relation between final, and initial velocities v and v0 of an object moving, with uniform acceleration a :, , 1, (v –v 0 ) t + v 0 t, 2, , v=, , v + v0, 2, , (constant acceleration only), (3.9b), , Equations (3.9a) and (3.9b) mean that the object, has undergone displacement x with an average, velocity equal to the arithmetic average of the, initial and final velocities., From Eq. (3.6), t = (v – v0)/a. Substituting this in, Eq. (3.9a), we get, 2, 2,  v + v0   v − v 0  v − v 0, x =vt =, =,  2   a , 2a, , This relation is graphically represented in Fig. 3.12., The area under this curve is :, Area between instants 0 and t = Area of triangle, ABC + Area of rectangle OACD, , v 2 = v02 + 2ax, , 2018-19, , (3.10)

Page 48 :
48, , PHYSICS, , This equation can also be obtained by, substituting the value of t from Eq. (3.6) into, Eq. (3.8). Thus, we have obtained three, important equations :, , =, , x = x 0 + v0 t +, , 1, x = v 0t + at 2, 2, (3.11a), , connecting five quantities v0, v, a, t and x. These, are kinematic equations of rectilinear motion, for constant acceleration., The set of Eq. (3.11a) were obtained by, assuming that at t = 0, the position of the, particle, x is 0. We can obtain a more general, equation if we take the position coordinate at t, = 0 as non-zero, say x0. Then Eqs. (3.11a) are, modified (replacing x by x – x0 ) to :, , v = v0 + at, 1, x = x 0 + v 0t + at 2, 2, , (3.11b), , v 2 = v 02 + 2a ( x − x 0 ), , (3.11c), , dv dv dx, dv, =, =v, dt dx dt, dx, or, v dv = a dx, Integrating both sides,, a=, , v, , ∫v, , t, , Answer By definition, dv, dt, dv = a dt, Integrating both sides, a =, , t, , ∫ 0a, , dv =, , dt, , t, , = a ∫ dt, 0, , (a is constant), , v – v 0 = at, v = v 0 + at, , x, 0, , dx =, , x, , ∫x, , a dx, , 0, , v 2 = v02 + 2a ( x – x 0 ), The advantage of this method is that it can be, used for motion with non-uniform acceleration, also., Now, we shall use these equations to some, important cases., t, Example 3.4 A ball is thrown vertically, upwards with a velocity of 20 m s–1 from, the top of a multistorey building. The, height of the point from where the ball is, thrown is 25.0 m from the ground. (a) How, high will the ball rise ? and (b) how long, will it be before the ball hits the ground?, Take g = 10 m s–2., , Answer (a) Let us take the y-axis in the, vertically upward direction with zero at the, ground, as shown in Fig. 3.13., Now vo = + 20 m s–1,, a = – g = –10 m s–2,, v = 0 m s–1, If the ball rises to height y from the point of, launch, then using the equation, v 2 = v02 + 2 a y – y 0, we get, , (, , dx, v=, Further,, dt, dx = v dt, Integrating both sides, , ∫x, , v dv =, , 0, , v 2 – v02, = a (x – x 0 ), 2, , t, Example 3.3 Obtain equations of motion, for constant acceleration using method of, calculus., , 0, , 1, a t2, 2, , We can write, , v 2 = v02 + 2ax, , v, , 1, a t2, 2, , x – x 0 = v0 t +, , v = v0 + at, , ∫v, , t, , ∫ 0 (v0 + at ) dt, , ), , 0 = (20)2 + 2(–10)(y – y0), Solving, we get, (y – y0) = 20 m., (b) We can solve this part of the problem in two, ways. Note carefully the methods used., , t, , ∫ 0 v dt, , 2018-19

Page 49 :
MOTION IN A STRAIGHT LINE, , 49, , 0 = 25 +20 t + (½) (-10) t2, Or,, , 5t2 – 20t – 25 = 0, , Solving this quadratic equation for t, we get, t = 5s, Note that the second method is better since we, do not have to worry about the path of the motion, as the motion is under constant acceleration., t, t, Fig. 3.13, , FIRST METHOD : In the first method, we split, the path in two parts : the upward motion (A to, B) and the downward motion (B to C) and, calculate the corresponding time taken t1 and, t2. Since the velocity at B is zero, we have :, v = vo + at, 0 = 20 – 10t1, Or,, t1 = 2 s, This is the time in going from A to B. From B, or, the point of the maximum height, the ball falls, freely under the acceleration due to gravity. The, ball is moving in negative y direction. We use, equation, 1 2, at, 2, We have, y0 = 45 m, y = 0, v0 = 0, a = – g = –10 m s–2, 0 = 45 + (½) (–10) t22, y = y0 + v 0t +, , Solving, we get t2 = 3 s, Therefore, the total time taken by the ball before, it hits the ground = t1 + t2 = 2 s + 3 s = 5 s., , Example 3.5 Free-fall : Discuss the, motion of an object under free fall. Neglect, air resistance., , Answer An object released near the surface of, the Earth is accelerated downward under the, influence of the force of gravity. The magnitude, of acceleration due to gravity is represented by, g. If air resistance is neglected, the object is, said to be in free fall. If the height through, which the object falls is small compared to the, earth’s radius, g can be taken to be constant,, equal to 9.8 m s–2. Free fall is thus a case of, motion with uniform acceleration., We assume that the motion is in y-direction,, more correctly in –y-direction because we, choose upward direction as positive. Since the, acceleration due to gravity is always downward,, it is in the negative direction and we have, a = – g = – 9.8 m s–2, The object is released from rest at y = 0. Therefore,, v0 = 0 and the equations of motion become:, v= 0–gt, = –9.8 t, m s–1, 2, 2, y = 0 – ½ g t = –4.9 t, m, v2 = 0 – 2 g y = –19.6 y m2 s–2, These equations give the velocity and the, distance travelled as a function of time and also, the variation of velocity with distance. The, variation of acceleration, velocity, and distance,, with time have been plotted in Fig. 3.14(a), (b), and (c)., , SECOND METHOD : The total time taken can, also be calculated by noting the coordinates of, initial and final positions of the ball with respect, to the origin chosen and using equation, , 1 2, at, 2, Now y0 = 25 m, y=0m, vo = 20 m s-1,, a = –10m s–2,, y = y0 + v 0t +, , t = ?, , (a), , 2018-19

Page 50 :
50, , PHYSICS, , traversed during successive intervals of, time. Since initial velocity is zero, we have, , 1 2, gt, 2, Using this equation, we can calculate the, position of the object after different time, intervals, 0, τ, 2τ, 3τ… which are given in, second column of Table 3.2. If we take, (–1/ 2 ) gτ2 as y0 — the position coordinate after, first time interval τ, then third column gives, the positions in the unit of yo. The fourth, column gives the distances traversed in, successive τs. We find that the distances are, in the simple ratio 1: 3: 5: 7: 9: 11… as shown, in the last column. This law was established, by Galileo Galilei (1564-1642) who was the first, to make quantitative studies of free fall., t, y=−, , (b), , t, (c), Fig. 3.14 Motion of an object under free fall., (a) Variation of acceleration with time., (b) Variation of velocity with time., (c) Variation of distance with time, t, , Example 3.6 Galileo’s law of odd, numbers : “The distances traversed, during, equal intervals of time, by a body falling, from rest, stand to one another in the same, ratio as the odd numbers beginning with, unity [namely, 1: 3: 5: 7…...].” Prove it., , t, , Answer Let us divide the time interval of, motion of an object under free fall into many, equal intervals τ and find out the distances, , Answer Let the distance travelled by the vehicle, before it stops be ds. Then, using equation of, motion v2 = vo2 + 2 ax, and noting that v = 0, we, have the stopping distance, – v02, 2a, Thus, the stopping distance is proportional to, the square of the initial velocity. Doubling the, ds =, , Table 3.2, , 2018-19, , Example 3.7 Stopping distance of, vehicles : When brakes are applied to a, moving vehicle, the distance it travels before, stopping is called stopping distance. It is, an important factor for road safety and, depends on the initial velocity (v0) and the, braking capacity, or deceleration, –a that, is caused by the braking. Derive an, expression for stopping distance of a vehicle, in terms of vo and a.

Page 51 :
MOTION IN A STRAIGHT LINE, , initial velocity increases the stopping distance, by a factor of 4 (for the same deceleration)., For the car of a particular make, the braking, distance was found to be 10 m, 20 m, 34 m and, 50 m corresponding to velocities of 11, 15, 20, and 25 m/s which are nearly consistent with, the above formula., , 51, , Or,, Given d = 21.0 cm and g = 9.8 m s–2 the reaction, time is, , Stopping distance is an important factor, considered in setting speed limits, for example,, in school zones., t, Example 3.8 Reaction time : When a, situation demands our immediate, action, it takes some time before we, really respond. Reaction time is the, time a person takes to observe, think, and act. For example, if a person is, driving and suddenly a boy appears on, the road, then the time elapsed before, he slams the brakes of the car is the, reaction time. Reaction time depends, on complexity of the situation and on, an individual., You can measure your reaction time, by a simple experiment. Take a ruler, and ask your friend to drop it vertically, through the gap between your thumb, and forefinger (Fig. 3.15). After you, catch it, find the distance d travelled, by the ruler. In a particular case, d was, found to be 21.0 cm. Estimate reaction, time., , t, 3.7 RELATIVE VELOCITY, You must be familiar with the experience of, travelling in a train and being overtaken by, another train moving in the same direction as, you are. While that train must be travelling faster, than you to be able to pass you, it does seem, slower to you than it would be to someone, standing on the ground and watching both the, trains. In case both the trains have the same, velocity with respect to the ground, then to you, the other train would seem to be not moving at, all. To understand such observations, we now, introduce the concept of relative velocity., Consider two objects A and B moving, uniformly with average velocities vA and vB in, one dimension, say along x-axis. (Unless, otherwise specified, the velocities mentioned in, this chapter are measured with reference to the, ground). If xA (0) and xB (0) are positions of objects, A and B, respectively at time t = 0, their positions, xA (t) and xB (t) at time t are given by:, , t, , xA (t ) = xA (0) + vA t, xB (t) = xB (0) + vB t, , (3.12a), (3.12b), , Then, the displacement from object A to object, B is given by, xBA(t) = xB (t) – xA (t), = [ xB (0) – xA (0) ] + (vB – vA) t., , Fig. 3.15 Measuring the reaction time., , Answer The ruler drops under free fall., Therefore, vo = 0, and a = – g = –9.8 m s–2. The, distance travelled d and the reaction time tr are, related by, , (3.13), , Equation (3.13) is easily interpreted. It tells us, that as seen from object A, object B has a, velocity vB – vA because the displacement from, A to B changes steadily by the amount vB – vA in, each unit of time. We say that the velocity of, object B relative to object A is vB – vA :, vBA = vB – vA, , (3.14a), , Similarly, velocity of object A relative to object B, is:, vAB = vA – vB, (3.14b), , 2018-19

Page 52 :
52, , PHYSICS, , Fig. 3.16 Position-time graphs of two objects with, equal velocities., , vBA = – vAB, , (3.14c), , Now we consider some special cases :, (a) If vB = vA, vB – vA = 0. Then, from Eq. (3.13), xB, (t) – xA (t) = xB (0) – xA (0). Therefore, the two, objects stay at a constant distance (xB (0) – xA, (0)) apart, and their position–time graphs are, straight lines parallel to each other as shown, in Fig. 3.16. The relative velocity vAB or vBA is, zero in this case., (b) If vA > vB, vB – vA is negative. One graph is, steeper than the other and they meet at a, common point. For example, suppose vA = 20 m s-1, and xA (0) = 10 m; and vB = 10 m s-1, xB (0) = 40, m; then the time at which they meet is t = 3 s, (Fig. 3.17). At this instant they are both at a, position xA (t) = xB (t) = 70 m. Thus, object A, overtakes object B at this time. In this case,vBA, = 10 m s–1 – 20 m s–1 = – 10 m s–1 = – vAB., (c) Suppose vA and vB are of opposite signs. For, example, if in the above example object A is, moving with 20 m s–1 starting at xA(0) = 10 m, and object B is moving with – 10 m s–1 starting, at xB (0) = 40 m, the two objects meet at t = 1 s, (Fig. 3.18). The velocity of B relative to A,, vBA = [–10 – (20)] m s–1 = –30 m s–1 = – vAB. In this, case, the magnitude of vBA or vAB ( = 30 m s–1) is, greater than the magnitude of velocity of A or, that of B. If the objects under consideration are, two trains, then for a person sitting on either of, the two, the other train seems to go very fast., Note that Eq. (3.14) are valid even if vA and vB, represent instantaneous velocities., , 2018-19, , Fig. 3.17 Position-time graphs of two objects with, unequal velocities, showing the time of, meeting., , t(s), , Fig. 3.18 Position-time graphs of two objects with, velocities in opposite directions, showing, the time of meeting., , t, , This shows:, , Example 3.9 Two parallel rail tracks run, north-south. Train A moves north with a, speed of 54 km h–1, and train B moves south, with a speed of 90 km h–1. What is the, (a) velocity of B with respect to A ?,, (b) velocity of ground with respect to B ?,, and, (c) velocity of a monkey running on the, roof of the train A against its motion, (with a velocity of 18 km h–1 with, respect to the train A) as observed by, a man standing on the ground ?, , Answer Choose the positive direction of x-axis, to be from south to north. Then,

Page 53 :
MOTION IN A STRAIGHT LINE, , 53, , vA = + 54 km h–1 = 15 m s–1, vB = – 90 km h–1 = – 25 m s–1, , B = 0 – vB = 25 m s–1., , Relative velocity of B with respect to A = vB – vA=, – 40 m s–1 , i.e. the train B appears to A to move, with a speed of 40 m s–1 from north to south., Relative velocity of ground with respect to, , In (c), let the velocity of the monkey with respect, to ground be vM. Relative velocity of the monkey, with respect to A,, vMA = vM – vA = –18 km h–1 = –5 ms–1. Therefore,, vM = (15 – 5) m s–1 = 10 m s–1., t, , SUMMARY, 1., , 2., 3., 4., 5., , An object is said to be in motion if its position changes with time. The position of the, object can be specified with reference to a conveniently chosen origin. For motion in, a straight line, position to the right of the origin is taken as positive and to the left as, negative., Path length is defined as the total length of the path traversed by an object., Displacement is the change in position : ∆x = x2 – x1. Path length is greater or equal to, the magnitude of the displacement between the same points., An object is said to be in uniform motion in a straight line if its displacement is equal, in equal intervals of time. Otherwise, the motion is said to be non-uniform., Average velocity is the displacement divided by the time interval in which the, displacement occurs :, v=, , ∆x, ∆t, , On an x-t graph, the average velocity over a time interval is the slope of the line, connecting the initial and final positions corresponding to that interval., 6., , Average Speed is the ratio of total path length traversed and the corresponding time, interval., The average speed of an object is greater or equal to the magnitude of the average, velocity over a given time interval., , 7., , Instantaneous velocity or simply velocity is defined as the limit of the average velocity as, the time interval ∆t becomes infinitesimally small :, , v = lim v = lim, ∆t → 0, , ∆t → 0, , ∆x dx, =, ∆t, dt, , The velocity at a particular instant is equal to the slope of the tangent drawn on, position-time graph at that instant., 8., , Average acceleration is the change in velocity divided by the time interval during which, the change occurs :, , a=, 9., , ∆v, ∆t, , Instantaneous acceleration is defined as the limit of the average acceleration as the time, interval ∆t goes to zero :, , a = lim a = lim, ∆t → 0, , ∆t → 0, , ∆ v dv, =, ∆t, dt, , The acceleration of an object at a particular time is the slope of the velocity-time, graph at that instant of time. For uniform motion, acceleration is zero and the x-t, graph is a straight line inclined to the time axis and the v-t graph is a straight line, , 2018-19

Page 54 :
54, , PHYSICS, , parallel to the time axis. For motion with uniform acceleration, x-t graph is a parabola, while the v-t graph is a straight line inclined to the time axis., 10. The area under the velocity-time curve between times t1 and t2 is equal to the displacement, of the object during that interval of time., 11. For objects in uniformly accelerated rectilinear motion, the five quantities, displacement, x, time taken t, initial velocity v0, final velocity v and acceleration a are related by a set, of simple equations called kinematic equations of motion :, v = v0 + at, , x = v0 t +, 2, , 1, 2, , at, , 2, , 2, , v = v0 + 2ax, if the position of the object at time t = 0 is 0. If the particle starts at x = x0 , x in above, equations is replaced by (x – x0)., , 2018-19

Page 55 :
MOTION IN A STRAIGHT LINE, , 55, , POINTS TO PONDER, 1., , 2., , 3., , 4., , 5., , 6., , 7., , 8., , The path length traversed by an object between two points is, in general, not the same, as the magnitude of displacement. The displacement depends only on the end points;, the path length (as the name implies) depends on the actual path. In one dimension,, the two quantities are equal only if the object does not change its direction during the, course of motion. In all other cases, the path length is greater than the magnitude of, displacement., In view of point 1 above, the average speed of an object is greater than or equal to the, magnitude of the average velocity over a given time interval. The two are equal only if, the path length is equal to the magnitude of displacement., The origin and the positive direction of an axis are a matter of choice. You should first, specify this choice before you assign signs to quantities like displacement, velocity, and acceleration., If a particle is speeding up, acceleration is in the direction of velocity; if its speed is, decreasing, acceleration is in the direction opposite to that of the velocity. This, statement is independent of the choice of the origin and the axis., The sign of acceleration does not tell us whether the particle’s speed is increasing or, decreasing. The sign of acceleration (as mentioned in point 3) depends on the choice, of the positive direction of the axis. For example, if the vertically upward direction is, chosen to be the positive direction of the axis, the acceleration due to gravity is, negative. If a particle is falling under gravity, this acceleration, though negative,, results in increase in speed. For a particle thrown upward, the same negative, acceleration (of gravity) results in decrease in speed., The zero velocity of a particle at any instant does not necessarily imply zero acceleration, at that instant. A particle may be momentarily at rest and yet have non-zero, acceleration. For example, a particle thrown up has zero velocity at its uppermost, point but the acceleration at that instant continues to be the acceleration due to, gravity., In the kinematic equations of motion [Eq. (3.11)], the various quantities are algebraic,, i.e. they may be positive or negative. The equations are applicable in all situations, (for one dimensional motion with constant acceleration) provided the values of different, quantities are substituted in the equations with proper signs., The definitions of instantaneous velocity and acceleration (Eqs. (3.3) and (3.5)) are, exact and are always correct while the kinematic equations (Eq. (3.11)) are true only, for motion in which the magnitude and the direction of acceleration are constant, during the course of motion., , EXERCISES, 3.1, , 3.2, , In which of the following examples of motion, can the body be considered, approximately a point object:, (a) a railway carriage moving without jerks between two stations., (b) a monkey sitting on top of a man cycling smoothly on a circular track., (c) a spinning cricket ball that turns sharply on hitting the ground., (d) a tumbling beaker that has slipped off the edge of a table., The position-time (x-t) graphs for two children A and B returning from their school, O to their homes P and Q respectively are shown in Fig. 3.19. Choose the correct, entries in the brackets below ;, (a) (A/B) lives closer to the school than (B/A), (b) (A/B) starts from the school earlier than (B/A), (c) (A/B) walks faster than (B/A), (d) A and B reach home at the (same/different) time, (e) (A/B) overtakes (B/A) on the road (once/twice)., , 2018-19

Page 56 :
56, , PHYSICS, , Fig. 3.19, 3.3, , 3.4, , 3.5, , 3.6, , 3.7, , 3.8, , 3.9, , 3.10, , A woman starts from her home at 9.00 am, walks with a speed of 5 km h–1 on a, straight road up to her office 2.5 km away, stays at the office up to 5.00 pm, and, returns home by an auto with a speed of 25 km h–1. Choose suitable scales and, plot the x-t graph of her motion., A drunkard walking in a narrow lane takes 5 steps forward and 3 steps backward,, followed again by 5 steps forward and 3 steps backward, and so on. Each step is 1, m long and requires 1 s. Plot the x-t graph of his motion. Determine graphically, and otherwise how long the drunkard takes to fall in a pit 13 m away from the, start., A jet airplane travelling at the speed of 500 km h–1 ejects its products of combustion, at the speed of 1500 km h–1 relative to the jet plane. What is the speed of the, latter with respect to an observer on the ground ?, A car moving along a straight highway with speed of 126 km h–1 is brought to a, stop within a distance of 200 m. What is the retardation of the car (assumed, uniform), and how long does it take for the car to stop ?, Two trains A and B of length 400 m each are moving on two parallel tracks with a, uniform speed of 72 km h–1 in the same direction, with A ahead of B. The driver of, B decides to overtake A and accelerates by 1 m s–2. If after 50 s, the guard of B just, brushes past the driver of A, what was the original distance between them ?, On a two-lane road, car A is travelling with a speed of 36 km h–1. Two cars B and, C approach car A in opposite directions with a speed of 54 km h–1 each. At a, certain instant, when the distance AB is equal to AC, both being 1 km, B decides, to overtake A before C does. What minimum acceleration of car B is required to, avoid an accident ?, Two towns A and B are connected by a regular bus service with a bus leaving in, either direction every T minutes. A man cycling with a speed of 20 km h–1 in the, direction A to B notices that a bus goes past him every 18 min in the direction of, his motion, and every 6 min in the opposite direction. What is the period T of the, bus service and with what speed (assumed constant) do the buses ply on the, road?, A player throws a ball upwards with an initial speed of 29.4 m s–1., (a) What is the direction of acceleration during the upward motion of the ball ?, (b) What are the velocity and acceleration of the ball at the highest point of its, motion ?, (c) Choose the x = 0 m and t = 0 s to be the location and time of the ball at its, highest point, vertically downward direction to be the positive direction of, x-axis, and give the signs of position, velocity and acceleration of the ball, during its upward, and downward motion., (d) To what height does the ball rise and after how long does the ball return to the, player’s hands ? (Take g = 9.8 m s–2 and neglect air resistance)., , 2018-19

Page 57 :
MOTION IN A STRAIGHT LINE, , 3.11, , 3.12, , 3.13, , 3.14, , 3.15, , 3.16, , 57, , Read each statement below carefully and state with reasons and examples, if it is, true or false ;, A particle in one-dimensional motion, (a) with zero speed at an instant may have non-zero acceleration at that instant, (b) with zero speed may have non-zero velocity,, (c) with constant speed must have zero acceleration,, (d) with positive value of acceleration must be speeding up., A ball is dropped from a height of 90 m on a floor. At each collision with the floor,, the ball loses one tenth of its speed. Plot the speed-time graph of its motion, between t = 0 to 12 s., Explain clearly, with examples, the distinction between :, (a) magnitude of displacement (sometimes called distance) over an interval of time,, and the total length of path covered by a particle over the same interval;, (b) magnitude of average velocity over an interval of time, and the average speed, over the same interval. [Average speed of a particle over an interval of time is, defined as the total path length divided by the time interval]. Show in both (a), and (b) that the second quantity is either greater than or equal to the first., When is the equality sign true ? [For simplicity, consider one-dimensional, motion only]., A man walks on a straight road from his home to a market 2.5 km away with a, speed of 5 km h–1. Finding the market closed, he instantly turns and walks back, home with a speed of 7.5 km h–1. What is the, (a) magnitude of average velocity, and, (b) average speed of the man over the interval of time (i) 0 to 30 min, (ii) 0 to, 50 min, (iii) 0 to 40 min ? [Note: You will appreciate from this exercise why it, is better to define average speed as total path length divided by time, and not, as magnitude of average velocity. You would not like to tell the tired man on, his return home that his average speed was zero !], In Exercises 3.13 and 3.14, we have carefully distinguished between average speed, and magnitude of average velocity. No such distinction is necessary when we, consider instantaneous speed and magnitude of velocity. The instantaneous speed, is always equal to the magnitude of instantaneous velocity. Why ?, Look at the graphs (a) to (d) (Fig. 3.20) carefully and state, with reasons, which of, these cannot possibly represent one-dimensional motion of a particle., , Fig. 3.20, , 2018-19

Page 58 :
58, , PHYSICS, , 3.17, , Figure 3.21 shows the x-t plot of one-dimensional, motion of a particle. Is it correct to say from the, graph that the particle moves in a straight line for, t < 0 and on a parabolic path for t >0 ? If not, suggest, a suitable physical context for this graph., , 3.18, , A police van moving on a highway with a speed of, 30 km h–1 fires a bullet at a thief’s car speeding away, in the same direction with a speed of 192 km h–1. If, the muzzle speed of the bullet is 150 m s–1, with, what speed does the bullet hit the thief’s car ? (Note:, Obtain that speed which is relevant for damaging, the thief’s car)., Suggest a suitable physical situation for each of the, following graphs (Fig 3.22):, , 3.19, , Fig. 3.21, , Fig. 3.22, 3.20, , Figure 3.23 gives the x-t plot of a particle executing one-dimensional simple, harmonic motion. (You will learn about this motion in more detail in Chapter14)., Give the signs of position, velocity and acceleration variables of the particle at, t = 0.3 s, 1.2 s, – 1.2 s., , Fig. 3.23, 3.21, , Figure 3.24 gives the x-t plot of a, particle in one-dimensional motion., Three different equal intervals of time, are shown. In which interval is the, average speed greatest, and in which, is it the least ? Give the sign of average, velocity for each interval., , Fig. 3.24, , 2018-19

Page 59 :
MOTION IN A STRAIGHT LINE, , 3.22, , 59, , Figure 3.25 gives a speed-time graph of, a particle in motion along a constant, direction. Three equal intervals of time, are shown. In which interval is the, average acceleration greatest in, magnitude ? In which interval is the, average speed greatest ? Choosing the, positive direction as the constant, direction of motion, give the signs of v, and a in the three intervals. What are, the accelerations at the points A, B, C, and D ?, , Fig. 3.25, , Additional Exercises, 3.23, , 3.24, , 3.25, , A three-wheeler starts from rest, accelerates uniformly with 1 m s–2 on a straight, road for 10 s, and then moves with uniform velocity. Plot the distance covered by, the vehicle during the nth second (n = 1,2,3….) versus n. What do you expect this, plot to be during accelerated motion : a straight line or a parabola ?, A boy standing on a stationary lift (open from above) throws a ball upwards with, the maximum initial speed he can, equal to 49 m s–1. How much time does the ball, take to return to his hands? If the lift starts moving up with a uniform speed of, 5 m s-1 and the boy again throws the ball up with the maximum speed he can, how, long does the ball take to return to his hands ?, On a long horizontally moving belt (Fig. 3.26), a child runs to and fro with a speed, –1, 9 km h (with respect to the belt) between his father and mother located 50 m apart, on the moving belt. The belt moves with a speed of 4 km h–1. For an observer on a, stationary platform outside, what is the, (a) speed of the child running in the direction of motion of the belt ?., (b) speed of the child running opposite to the direction of motion of the belt ?, (c) time taken by the child in (a) and (b) ?, Which of the answers alter if motion is viewed by one of the parents ?, , Fig. 3.26, 3.26, , Two stones are thrown up simultaneously from the edge of a cliff 200 m high with, initial speeds of 15 m s–1 and 30 m s–1. Verify that the graph shown in Fig. 3.27, correctly represents the time variation of the relative position of the second stone, with respect to the first. Neglect air resistance and assume that the stones do not, rebound after hitting the ground. Take g = 10 m s–2. Give the equations for the, linear and curved parts of the plot., , 2018-19

Page 60 :
60, , PHYSICS, , 3.27, , Fig. 3.27, The speed-time graph of a particle moving along a fixed direction is shown in, Fig. 3.28. Obtain the distance traversed by the particle between (a) t = 0 s to 10 s,, (b) t = 2 s to 6 s., , Fig. 3.28, What is the average speed of the particle over the intervals in (a) and (b) ?, 3.28, , The velocity-time graph of a particle in one-dimensional motion is shown in, Fig. 3.29 :, , Fig. 3.29, Which of the following formulae are correct for describing the motion of the particle, over the time-interval t1 to t2:, (a) x(t2 ) = x(t1) + v (t1) (t2 – t1) +(½) a (t2 – t1)2, (b) v(t2 ) = v(t1) + a (t2 – t1), (c) vaverage = (x(t2) – x(t1))/(t2 – t1), (d) aaverage = (v(t2) – v(t1))/(t2 – t1), (e) x(t2 ) = x(t1) + vaverage (t2 – t1) + (½) aaverage (t2 – t1)2, (f) x(t2 ) – x(t1) = area under the v-t curve bounded by the t-axis and the dotted line, shown., , 2018-19

Page 61 :
MOTION IN A STRAIGHT LINE, , 61, , APPENDIX 3.1 : ELEMENTS OF CALCULUS, Differential Calculus, Using the concept of ‘differential coefficient’ or ‘derivative’, we can easily define velocity and, acceleration. Though you will learn in detail in mathematics about derivatives, we shall introduce, this concept in brief in this Appendix so as to facilitate its use in describing physical quantities, involved in motion., Suppose we have a quantity y whose value depends upon a single variable x, and is expressed, by an equation defining y as some specific function of x. This is represented as:, y = f (x), , (1), , This relationship can be visualised by drawing a graph of function y = f (x) regarding y and x as, Cartesian coordinates, as shown in Fig. 3.30 (a)., , (a), , (b), Fig. 3.30, , Consider the point P on the curve y = f (x) whose coordinates are (x, y) and another point Q, where coordinates are (x + ∆x, y + ∆y). The slope of the line joining P and Q is given by:, tanθ =, , ∆y (y + ∆y ) − y, =, ∆x, ∆x, , (2), , Suppose now that the point Q moves along the curve towards P. In this process, ∆y and ∆x, decrease and approach zero; though their ratio, , ∆y, , will not necessarily vanish. What happens, ∆x, to the line PQ as ∆y→ 0, ∆x→ 0. You can see that this line becomes a tangent to the curve at, point P as shown in Fig. 3.30(b). This means that tan θ approaches the slope of the tangent at, P, denoted by m:, , ∆y, (y + ∆y ) − y, = lim, (3), ∆x ∆x → 0, ∆x, The limit of the ratio ∆y/∆x as ∆x approaches zero is called the derivative of y with respect to x, and is written as dy/dx. It represents the slope of the tangent line to the curve y = f (x) at the, point (x, y)., Since y = f (x) and y + ∆y = f (x + ∆x), we can write the definition of the derivative as:, m = lim, , ∆x → 0, , dy df ( x ), ∆y,  f ( x + ∆x ) – f ( x ) , =, = lim, = lim , , dx, dx, ∆x, ∆x →0 ∆x, ∆x → 0 , , , Given below are some elementary formulae for derivatives of functions. In these u (x) and v (x), represent arbitrary functions of x, and a and b denote constant quantities that are independent, of x. Derivatives of some common functions are also listed ., , 2018-19

Page 62 :
62, , PHYSICS, , d (a u ), du, =a, dx, dx, , ;, , du du dx, =, ., dt, dx dt, , d(uv), dv, du, =u, +v, dx, dx, dx, , ;, , d (u / v ), 1 du, dv, –u, = 2, dx, dx, v dx, , d, (sin x ) = cos x, dx, , ;, , d, (cos x ) = – sin x, dx, , d, (tan x ) = sec2 x, dx, , ;, , d, (cot x ) = – cos ec 2 x, dx, , d, (sec x) = tan x sec x, dx, , ;, , d, (cosec 2 x ) = – cot x co sec x, dx, , d, du, (u )n = n u n –1, dx, dx, , ;, , d, 1, ( ln u) =, du, u, , du du dx, =, dv dv dx, , d u, (e ) = eu, du, , In terms of derivatives, instantaneous velocity and acceleration are defined as, v = lim, , ∆t → 0, , a = lim, , ∆t →0, , Integral Calculus, , ∆x dx, =, ∆t, dt, , ∆v dv d2 x, =, =, ∆t, dt dt 2, , You are familiar with the notion of area. The formulae for areas of simple geometrical figures are, also known to you. For example, the area of a rectangle is length times breadth and that of a, triangle is half of the product of base and height. But how to deal with the problem of determination, of area of an irregular figure? The mathematical notion of integral is necessary in connection with, such problems., Let us take a concrete example. Suppose a variable force f (x) acts on a particle in its motion, along x - axis from x = a to x = b. The problem is to determine the work done (W) by the force on the, particle during the motion. This problem is discussed in detail in Chapter 6., Figure 3.31 shows the variation of F(x) with x. If the force were constant, work would be simply, the area F (b-a) as shown in Fig. 3.31(i). But in the general case, force is varying ., , Fig. 3.31, , 2018-19

Page 63 :
MOTION IN A STRAIGHT LINE, , 63, , To calculate the area under this curve [Fig. 3.31 (ii)], let us employ the following trick. Divide the, interval on x-axis from a to b into a large number (N) of small intervals: x0(=a) to x1, x1 to x2 ; x2 to x3,, ................................ xN-1 to xN (=b). The area under the curve is thus divided into N strips. Each strip, is approximately a rectangle, since the variation of F(x) over a strip is negligible. The area of the ith, strip shown [Fig. 3.31(ii)] is then approximately, ∆Ai = F (x i )(x i – x i –1) = F (x i )∆x, , where ∆x is the width of the strip which we have taken to be the same for all the strips. You may, wonder whether we should put F(xi-1) or the mean of F(xi) and F(xi-1) in the above expression. If we, take N to be very very large (N→∞ ), it does not really matter, since then the strip will be so thin that, the difference between F(xi) and F(xi-1) is vanishingly small. The total area under the curve then is:, N, , A=, , ∑, , N, , ∆Ai =, , i =1, , ∑ F (x )∆x, i, , i =1, , The limit of this sum as N→∞ is known as the integral of F(x) over x from a to b. It is given a special, symbol as shown below:, b, , A=, , ∫ F (x )dx, a, , The integral sign, , ∫, , looks like an elongated S, reminding us that it basically is the limit of the sum, , of an infinite number of terms., A most significant mathematical fact is that integration is, in a sense, an inverse of differentiation., Suppose we have a function g (x) whose derivative is f (x), i.e. f ( x ) =, , dg(x ), dx, , The function g (x) is known as the indefinite integral of f (x) and is denoted as:, g( x ) =, , ∫ f (x )dx, , An integral with lower and upper limits is known as a definite integral. It is a number. Indefinite, integral has no limits; it is a function., A fundamental theorem of mathematics states that, b, , ∫ f (x ) dx = g(x ), , b, a, , ≡ g(b ) – g(a ), , a, , 2, , As an example, suppose f (x) = x and we wish to determine the value of the definite integral from, x =1 to x = 2. The function g (x) whose derivative is x2 is x3/3. Therefore,, 2, , ∫, 1, , x 2 dx =, , x3, 3, , 2, , =, 1, , 8 1 7, – =, 3 3 3, , Clearly, to evaluate definite integrals, we need to know the corresponding indefinite integrals. Some, common indefinite integrals are, , 2018-19

Page 64 :
64, , PHYSICS, , 1, , ∫ ( x )dx = ln x, , ( x > 0), , This introduction to differential and integral calculus is not rigorous and is intended to convey to, you the basic notions of calculus., , 2018-19

Page 65 :
CHAPTER FOUR, , MOTION, , IN A, , PLANE, , 4.1 INTRODUCTION, , 4.1 Introduction, 4.2 Scalars and vectors, 4.3 Multiplication of vectors by, real numbers, , 4.4 Addition and subtraction of, vectors — graphical method, , 4.5 Resolution of vectors, 4.6 Vector addition — analytical, method, , 4.7 Motion in a plane, 4.8 Motion in a plane with, constant acceleration, , 4.9 Relative velocity in two, dimensions, , 4.10 Projectile motion, 4.11 Uniform circular motion, Summary, Points to ponder, Exercises, Additional exercises, , In the last chapter we developed the concepts of position,, displacement, velocity and acceleration that are needed to, describe the motion of an object along a straight line. We, found that the directional aspect of these quantities can be, taken care of by + and – signs, as in one dimension only two, directions are possible. But in order to describe motion of an, object in two dimensions (a plane) or three dimensions, (space), we need to use vectors to describe the abovementioned physical quantities. Therefore, it is first necessary, to learn the language of vectors. What is a vector ? How to, add, subtract and multiply vectors ? What is the result of, multiplying a vector by a real number ? We shall learn this, to enable us to use vectors for defining velocity and, acceleration in a plane. We then discuss motion of an object, in a plane. As a simple case of motion in a plane, we shall, discuss motion with constant acceleration and treat in detail, the projectile motion. Circular motion is a familiar class of, motion that has a special significance in daily-life situations., We shall discuss uniform circular motion in some detail., The equations developed in this chapter for motion in a, plane can be easily extended to the case of three dimensions., 4.2 SCALARS AND VECTORS, In physics, we can classify quantities as scalars or, vectors. Basically, the difference is that a direction is, associated with a vector but not with a scalar. A scalar, quantity is a quantity with magnitude only. It is specified, completely by a single number, along with the proper, unit. Examples are : the distance between two points,, mass of an object, the temperature of a body and the, time at which a certain event happened. The rules for, combining scalars are the rules of ordinary algebra., Scalars can be added, subtracted, multiplied and divided, , 2018-19

Page 66 :
66, , PHYSICS, , just as the ordinary numbers*. For example,, if the length and breadth of a rectangle are, 1.0 m and 0.5 m respectively, then its, perimeter is the sum of the lengths of the, four sides, 1.0 m + 0.5 m +1.0 m + 0.5 m =, 3.0 m. The length of each side is a scalar, and the perimeter is also a scalar. Take, another example: the maximum and, minimum temperatures on a particular day, are 35.6 °C and 24.2 °C respectively. Then,, the difference between the two temperatures, is 11.4 °C. Similarly, if a uniform solid cube, of aluminium of side 10 cm has a mass of, 2.7 kg, then its volume is 10–3 m3 (a scalar), and its density is 2.7×103 kg m –3 (a scalar)., A vector quantity is a quantity that has both, a magnitude and a direction and obeys the, triangle law of addition or equivalently the, parallelogram law of addition. So, a vector is, specified by giving its magnitude by a number, and its direction. Some physical quantities that, are represented by vectors are displacement,, velocity, acceleration and force., To represent a vector, we use a bold face type, in this book. Thus, a velocity vector can be, represented by a symbol v. Since bold face is, difficult to produce, when written by hand, a, vector is often represented, by an arrow placed, r, r, v, over a letter, say, . Thus, both v and v, represent the velocity vector. The magnitude of, a vector is often called its absolute value,, indicated by |v| = v. Thus, a vector is, represented by a bold face, e.g. by A, a, p, q, r, ..., x, y, with respective magnitudes denoted by light, face A, a, p, q, r, ... x, y., , represented by another position vector, OP′, denoted by r′. The length of the vector r, represents the magnitude of the vector and its, direction is the direction in which P lies as seen, from O. If the object moves from P to P′, the, vector PP′ (with tail at P and tip at P′) is called, the displacement vector corresponding to, motion from point P (at time t) to point P′ (at time t′)., , 4.2.1 Position and Displacement Vectors, , Two vectors A and B are said to be equal if, and, only if, they have the same magnitude and the, same direction.**, Figure 4.2(a) shows two equal vectors A and, B. We can easily check their equality. Shift B, parallel to itself until its tail Q coincides with that, of A, i.e. Q coincides with O. Then, since their, tips S and P also coincide, the two vectors are, said to be equal. In general, equality is indicated, , To describe the position of an object moving in, a plane, we need to choose a convenient point,, say O as origin. Let P and P′ be the positions of, the object at time t and t′, respectively [Fig. 4.1(a)]., We join O and P by a straight line. Then, OP is, the position vector of the object at time t. An, arrow is marked at the head of this line. It is, represented by a symbol r, i.e. OP = r. Point P′ is, , *, , Fig. 4.1 (a) Position and displacement vectors., (b) Displacement vector PQ and different, courses of motion., , It is important to note that displacement, vector is the straight line joining the initial and, final positions and does not depend on the actual, path undertaken by the object between the two, positions. For example, in Fig. 4.1(b), given the, initial and final positions as P and Q, the, displacement vector is the same PQ for different, paths of journey, say PABCQ, PDQ, and PBEFQ., Therefore, the magnitude of displacement is, either less or equal to the path length of an, object between two points. This fact was, emphasised in the previous chapter also while, discussing motion along a straight line., 4.2.2 Equality of Vectors, , Addition and subtraction of scalars make sense only for quantities with same units. However, you can multiply, and divide scalars of different units., ** In our study, vectors do not have fixed locations. So displacing a vector parallel to itself leaves the vector, unchanged. Such vectors are called free vectors. However, in some physical applications, location or line of, application of a vector is important. Such vectors are called localised vectors., , 2018-19

Page 67 :
MOTION IN A PLANE, , 67, , The factor λ by which a vector A is multiplied, could be a scalar having its own physical, dimension. Then, the dimension of λ A is the, product of the dimensions of λ and A. For, example, if we multiply a constant velocity vector, by duration (of time), we get a displacement, vector., 4.4 ADDITION AND SUBTRACTION OF, VECTORS — GRAPHICAL METHOD, Fig. 4.2 (a) Two equal vectors A and B. (b) Two, vectors A′ and B′ are unequal though they, are of the same length., , as A = B. Note that in Fig. 4.2(b), vectors A′ and, B′ have the same magnitude but they are not, equal because they have different directions., Even if we shift B′ parallel to itself so that its tail, Q′ coincides with the tail O′ of A′, the tip S′ of B′, does not coincide with the tip P′ of A′., 4.3 MULTIPLICATION OF VECTORS BY REAL, NUMBERS, Multiplying a vector A with a positive number λ, gives a vector whose magnitude is changed by, the factor λ but the direction is the same as that, of A :, , As mentioned in section 4.2, vectors, by, definition, obey the triangle law or equivalently,, the parallelogram law of addition. We shall now, describe this law of addition using the graphical, method. Let us consider two vectors A and B that, lie in a plane as shown in Fig. 4.4(a). The lengths, of the line segments representing these vectors, are proportional to the magnitude of the vectors., To find the sum A + B, we place vector B so that, its tail is at the head of the vector A, as in, Fig. 4.4(b). Then, we join the tail of A to the head, of B. This line OQ represents a vector R, that is,, the sum of the vectors A and B. Since, in this, procedure of vector addition, vectors are, , λ A = λ A if λ > 0., For example, if A is multiplied by 2, the resultant, vector 2A is in the same direction as A and has, a magnitude twice of |A| as shown in Fig. 4.3(a)., Multiplying a vector A by a negative number, −λ gives another vector whose direction is, opposite to the direction of A and whose, magnitude is λ times |A|., Multiplying a given vector A by negative, numbers, say –1 and –1.5, gives vectors as, shown in Fig 4.3(b)., , (c), Fig. 4.3 (a) Vector A and the resultant vector after, multiplying A by a positive number 2., (b) Vector A and resultant vectors after, multiplying it by a negative number –1, and –1.5., , (d), , Fig. 4.4 (a) Vectors A and B. (b) Vectors A and B, added graphically. (c) Vectors B and A, added graphically. (d) Illustrating the, associative law of vector addition., , 2018-19

Page 68 :
68, , PHYSICS, , arranged head to tail, this graphical method is, called the head-to-tail method. The two vectors, and their resultant form three sides of a triangle,, so this method is also known as triangle method, of vector addition. If we find the resultant of, B + A as in Fig. 4.4(c), the same vector R is, obtained. Thus, vector addition is commutative:, A+B=B+A, , (4.1), , What is the physical meaning of a zero vector?, Consider the position and displacement vectors, in a plane as shown in Fig. 4.1(a). Now suppose, that an object which is at P at time t, moves to, P′ and then comes back to P. Then, what is its, displacement? Since the initial and final, positions coincide, the displacement is a “null, vector”., , The addition of vectors also obeys the associative, law as illustrated in Fig. 4.4(d). The result of, adding vectors A and B first and then adding, vector C is the same as the result of adding B, and C first and then adding vector A :, , Subtraction of vectors can be defined in terms, of addition of vectors. We define the difference, of two vectors A and B as the sum of two vectors, A and –B :, , (A + B) + C = A + (B + C), , It is shown in Fig 4.5. The vector –B is added to, vector A to get R2 = (A – B). The vector R1 = A + B, is also shown in the same figure for comparison., We can also use the parallelogram method to, find the sum of two vectors. Suppose we have, two vectors A and B. To add these vectors, we, bring their tails to a common origin O as, shown in Fig. 4.6(a). Then we draw a line from, the head of A parallel to B and another line from, the head of B parallel to A to complete a, parallelogram OQSP. Now we join the point of, the intersection of these two lines to the origin, O. The resultant vector R is directed from the, common origin O along the diagonal (OS) of the, parallelogram [Fig. 4.6(b)]. In Fig.4.6(c), the, triangle law is used to obtain the resultant of A, and B and we see that the two methods yield the, same result. Thus, the two methods are, equivalent., , (4.2), , What is the result of adding two equal and, opposite vectors ? Consider two vectors A and, –A shown in Fig. 4.3(b). Their sum is A + (–A)., Since the magnitudes of the two vectors are the, same, but the directions are opposite, the, resultant vector has zero magnitude and is, represented by 0 called a null vector or a zero, vector :, A–A=0, , |0|= 0, , (4.3), , Since the magnitude of a null vector is zero, its, direction cannot be specified., The null vector also results when we multiply, a vector A by the number zero. The main, properties of 0 are :, A+0=A, λ0=0, 0A=0, (4.4), , A – B = A + (–B), , (4.5), , Fig. 4.5 (a) Two vectors A and B, – B is also shown. (b) Subtracting vector B from vector A – the result is R2. For, comparison, addition of vectors A and B, i.e. R1 is also shown., , 2018-19

Page 69 :
MOTION IN A PLANE, , 69, , Fig. 4.6 (a) Two vectors A and B with their tails brought to a common origin. (b) The sum A + B obtained using, the parallelogram method. (c) The parallelogram method of vector addition is equivalent to the triangle, method., , Example 4.1 Rain is falling vertically with, a speed of 35 m s–1. Winds starts blowing, after sometime with a speed of 12 m s–1 in, east to west direction. In which direction, should a boy waiting at a bus stop hold, his umbrella ?, , 4.5 RESOLUTION OF VECTORS, Let a and b be any two non-zero vectors in a, plane with different directions and let A be, another vector in the same plane(Fig. 4.8). A can, be expressed as a sum of two vectors — one, obtained by multiplying a by a real number and, the other obtained by multiplying b by another, real number. To see this, let O and P be the tail, and head of the vector A. Then, through O, draw, a straight line parallel to a, and through P, a, straight line parallel to b. Let them intersect at, Q. Then, we have, , t, , A = OP = OQ + QP, , (4.6), , But since OQ is parallel to a, and QP is parallel, to b, we can write :, OQ = λ a, and QP = µ b, , Fig. 4.7, , Answer The velocity of the rain and the wind, are represented by the vectors vr and vw in Fig., 4.7 and are in the direction specified by the, problem. Using the rule of vector addition, we, see that the resultant of vr and vw is R as shown, in the figure. The magnitude of R is, 2, , 2, , 2, , R = vr + vw = 35 + 12, , 2, , ms, , −1, , = 37 m s, , (4.7), , where λ and µ are real numbers., Therefore, A = λ a + µ b, , (4.8), , −1, , The direction θ that R makes with the vertical, is given by, tan θ =, , vw 12, =, = 0.343, vr, 35, , -1, Or,, θ = tan ( 0.343) = 19°, Therefore, the boy should hold his umbrella, in the vertical plane at an angle of about 19o, with the vertical towards the east., t, , Fig. 4.8 (a) Two non-colinear vectors a and b., (b) Resolving a vector A in terms of vectors, a and b., , We say that A has been resolved into two, component vectors λ a and µ b along a and b, respectively. Using this method one can resolve, , 2018-19

Page 70 :
70, , PHYSICS, , a given vector into two component vectors along, a set of two vectors – all the three lie in the same, plane. It is convenient to resolve a general vector, along the axes of a rectangular coordinate, system using vectors of unit magnitude. These, are called unit vectors that we discuss now. A, unit vector is a vector of unit magnitude and, points in a particular direction. It has no, dimension and unit. It is used to specify a, direction only. Unit vectors along the x-, y- and, z-axes of a rectangular coordinate system are, denoted by
i ,
j and k̂ , respectively, as shown, in Fig. 4.9(a)., Since these are unit vectors, we have, ,  î  =  ĵ  =  k̂ =1, , say n̂ by a scalar, the result is a vector, , λ = λ n̂. In general, a vector A can be written as, (4.10), , where n̂ is a unit vector along A., We can now resolve a vector A in terms, of component vectors that lie along unit vectors, î and
j . Consider a vector A that lies in x-y, plane as shown in Fig. 4.9(b). We draw lines from, the head of A perpendicular to the coordinate, axes as in Fig. 4.9(b), and get vectors A1 and A2, such that A + A = A. Since A is parallel to
i, 1, , 2, , 1, , Thus,, , A = Ax
i + Ay
j, , (4.12), , This is represented in Fig. 4.9(c). The quantities, Ax and Ay are called x-, and y- components of the, vector A. Note that Ax is itself not a vector, but, A
i is a vector, and so is A
j . Using simple, x, , y, , trigonometry, we can express Ax and Ay in terms, of the magnitude of A and the angle θ it makes, with the x-axis :, Ax = A cos θ, Ay = A sin θ, , (4.13), , As is clear from Eq. (4.13), a component of a, vector can be positive, negative or zero, depending on the value of θ., Now, we have two ways to specify a vector A, in a plane. It can be specified by :, (i) its magnitude A and the direction θ it makes, with the x-axis; or, (ii) its components Ax and Ay, If A and θ are given, Ax and Ay can be obtained, using Eq. (4.13). If Ax and Ay are given, A and θ, can be obtained as follows :, 2, , 2, , 2, , 2, , 2, , 2, , A x + Ay = A cos θ + A sin θ, , = A2, Or,, , A=, , A 2x + Ay2, , And, , tan θ =, , Ay, Ax, , , θ = tan− 1, , (4.14), Ay, Ax, , Fig. 4.9 (a) Unit vectors
i ,
j and k
lie along the x-, y-, and z-axes. (b) A vector A is resolved into its, components Ax and Ay along x-, and y- axes. (c) A1 and A2 expressed in terms of
i and
j ., , 2018-19, , (4.11), , where Ax and Ay are real numbers., , (4.9), , These unit vectors are perpendicular to each, other. In this text, they are printed in bold face, with a cap (^) to distinguish them from other, vectors. Since we are dealing with motion in two, dimensions in this chapter, we require use of, only two unit vectors. If we multiply a unit vector,, , A = |A| n̂, , and A2 is parallel to
j , we have :, A1= Ax
i , A2 = Ay
j, , (4.15)

Page 71 :
MOTION IN A PLANE, , 71, , So far we have considered a vector lying in, an x-y plane. The same procedure can be used, to resolve a general vector A into three, components along x-, y-, and z-axes in three, dimensions. If α , β, and γ are the angles *, between A and the x-, y-, and z-axes, respectively, [Fig. 4.9(d)], we have, , B = B x i
+ By
j, , Let R be their sum. We have, R=A+B, , (, , ) (, , = A x
i + Ay
j + B x i
+ By
j, , ), , (4.19a), , Since vectors obey the commutative and, associative laws, we can arrange and regroup, the vectors in Eq. (4.19a) as convenient to us :, , (, , ), , R = ( A x + B x )
i + Ay + By
j, Since R = R x i
+ Ry
j, , (4.19b), (4.20), , we have, R x = A x + B x , R y = Ay + B y, (4.21), Thus, each component of the resultant, vector R is the sum of the corresponding, components of A and B., In three dimensions, we have, A = A i
+ A
j + A k
, x, , y, , z, , B = B x i
+ By
j + B z k
, (d), Fig. 4.9 (d), , A vector A resolved into components along, x-, y-, and z-axes, , R = A + B = R x i
+ Ry
j + Rz k
, , with, , Rx = Ax + Bx, , A x = A cos α , A y = A cos β , A z = A cos γ (4.16a), , Ry = Ay + By, , In general, we have, (4.16b), ˆ, A = Ax ˆi + Ay ˆj + Az k, The magnitude of vector A is, (4.16c), A = Ax2 + Ay2 + Az2, A position vector r can be expressed as, (4.17), r = x i
+ y
j + z k
, , Rz = Az + Bz, , This method can be extended to addition and, subtraction of any number of vectors. For, example, if vectors a, b and c are given as, a = a i
+ a
j + a k
, x, , A = A x i
+ Ay
j, , *, , z, , c = c x i
+ c y
j + c z k
, , (4.23a), , then, a vector T = a + b – c has components :, Tx = a x + b x − c x, Ty = a y + by − c y, , (4.23b), , Tz = a z + b z − c z ., , t, , Although the graphical method of adding vectors, helps us in visualising the vectors and the, resultant vector, it is sometimes tedious and has, limited accuracy. It is much easier to add vectors, by combining their respective components., Consider two vectors A and B in x-y plane with, components Ax, Ay and Bx, By :, , y, , b = b x i
+ by
j + bz k
, , where x, y, and z are the components of r along, x-, y-, z-axes, respectively., 4.6 VECTOR ADDITION – ANALYTICAL, METHOD, , (4.22), , Example 4.2 Find the magnitude and, direction of the resultant of two vectors A, and B in terms of their magnitudes and, angle θ between them., , (4.18), , Note that angles α, β, and γ are angles in space. They are between pairs of lines, which are not coplanar., , 2018-19

Page 72 :
72, , PHYSICS, , t, Fig. 4.10, , Answer Let OP and OQ represent the two vectors, A and B making an angle θ (Fig. 4.10). Then,, using the parallelogram method of vector, addition, OS represents the resultant vector R :, , Example 4.3 A motorboat is racing, towards north at 25 km/h and the water, current in that region is 10 km/h in the, direction of 60° east of south. Find the, resultant velocity of the boat., , Answer The vector vb representing the velocity, of the motorboat and the vector vc representing, the water current are shown in Fig. 4.11 in, directions specified by the problem. Using the, parallelogram method of addition, the resultant, R is obtained in the direction shown in the, figure., , R=A+B, SN is normal to OP and PM is normal to OS., From the geometry of the figure,, OS2 = ON2 + SN2, but ON = OP + PN = A + B cos θ, SN = B sin θ, OS2 = (A + B cos θ)2 + (B sin θ)2, or,, , R2 = A2 + B2 + 2AB cos θ, , R=, , A 2 + B 2 + 2AB cos θ, , (4.24a), , In ∆ OSN, SN = OS sinα = R sinα, and, in ∆ PSN, SN = PS sin θ = B sin θ, Therefore, R sin α = B sin θ, or,, , R, B, =, sin θ sin α, , (4.24b), Fig. 4.11, , Similarly,, PM = A sin α = B sin β, or,, , A, B, =, sin β sin α, , (4.24c), , Combining Eqs. (4.24b) and (4.24c), we get, R, sin θ, , =, , A, sin β, , =, , B, sin α, , (4.24d), , sin α =, , R = v 2b + v c2 + 2v bv c cos120o, = 252 + 102 + 2 × 25 × 10 ( -1/2 ) ≅ 22 km/h, To obtain the direction, we apply the Law of sines, , Using Eq. (4.24d), we get:, B, , We can obtain the magnitude of R using the Law, of cosine :, , R, , sin θ, , R, , (4.24e), , sin θ, , where R is given by Eq. (4.24a)., or, tan α =, , SN, B sin θ, =, OP + PN, A + B cos θ, , =, , (4.24f), , Equation (4.24a) gives the magnitude of the, resultant and Eqs. (4.24e) and (4.24f) its direction., Equation (4.24a) is known as the Law of cosines, and Eq. (4.24d) as the Law of sines., t, , 2018-19, , =, , vc, , or, sin φ =, , sin φ, , 10 × sin120, 21.8, , φ ≅ 23.4, , , , =, , 10 3, 2 × 21.8, , , , vc, , sin θ, , R, , ≅ 0.397, , t, , 4.7 MOTION IN A PLANE, In this section we shall see how to describe, motion in two dimensions using vectors.

Page 73 :
MOTION IN A PLANE, , 73, , 4.7.1 Position Vector and Displacement, The position vector r of a particle P located in a, plane with reference to the origin of an x-y, reference frame (Fig. 4.12) is given by, r = x i
+ y
j, , where x and y are components of r along x-, and, y- axes or simply they are the coordinates of, the object., , Suppose a particle moves along the curve shown, by the thick line and is at P at time t and P′ at, time t′ [Fig. 4.12(b)]. Then, the displacement is :, ∆r = r′ – r, (4.25), and is directed from P to P′., We can write Eq. (4.25) in a component form:, , (, , ) (, , = x'
i + y'
j − x i
+ y
j, , ∆r, , ), , =
i∆x +
j∆y, , where, , ∆x, , = x ′ – x, ∆y = y′ – y, , (4.26), , Velocity, The average velocity ( v ) of an object is the ratio, of the displacement and the corresponding time, interval :, v=, , Or,, , ∆r, ∆t, , =, , ∆x i
+ ∆y
j, ∆t, , ∆x
∆y, = i
, +j, ∆t, ∆t, , (4.27), , v = v x ˆi + v y j, , (a), , Since v =, , ∆r, ∆t, , , the direction of the average velocity, , is the same as that of ∆r (Fig. 4.12). The velocity, (instantaneous velocity) is given by the limiting, value of the average velocity as the time interval, approaches zero :, , ∆ r dr, =, (4.28), ∆t → 0 ∆ t, dt, The meaning of the limiting process can be easily, understood with the help of Fig 4.13(a) to (d). In, these figures, the thick line represents the path, of an object, which is at P at time t. P1, P2 and, P3 represent the positions of the object after, times ∆t1,∆t2, and ∆t3. ∆r1, ∆r2, and ∆r3 are the, displacements of the object in times ∆t1, ∆t2, and, v = lim, , (b), Fig. 4.12 (a) Position vector r. (b) Displacement ∆r and, average velocity v of a particle., , Fig. 4.13 As the time interval ∆t approaches zero, the average velocity approaches the velocity v. The direction, of v is parallel to the line tangent to the path., , 2018-19

Page 74 :
74, , PHYSICS, , ∆t3, respectively. The direction of the average, velocity v is shown in figures (a), (b) and (c) for, three decreasing values of ∆t, i.e. ∆t1,∆t2, and ∆t3,, ( ∆ t 1 > ∆ t 2 > ∆ t 3 ). As ∆ t → 0, ∆ r → 0, and is along the tangent to the path [Fig. 4.13(d)]., Therefore, the direction of velocity at any point, on the path of an object is tangential to the, path at that point and is in the direction of, motion., We can express v in a component form :, v=, , dr, , Fig. 4.14 The components vx and vy of velocity v and, the angle θ it makes with x-axis. Note that, vx = v cos θ, vy = v sin θ., , dt,  ∆x, ∆y, = lim , i
+, , ∆ t → 0 ∆t, ∆t, , ,
j , , , (4.29), , The acceleration (instantaneous acceleration), is the limiting value of the average acceleration, as the time interval approaches zero :, , ∆x
, ∆y, = i
lim, + j lim, ∆ t → 0 ∆t, ∆ t → 0 ∆t, , a = lim, , ∆t → 0, , 2, , v = v x + vy, , (4.30b), , and the direction of v is given by the angle θ :, vy, , , θ = tan, , v , y, , , ,  vx , , −1 , , vx, , (4.30c), , vx, vy and angle θ are shown in Fig. 4.14 for a, velocity vector v., Acceleration, The average acceleration a of an object for a, time interval ∆t moving in x-y plane is the change, in velocity divided by the time interval :, a=, , Or,, , *, , ∆v, ∆t, , =, , (, , ∆ v x i
+ v y
j, ∆t, , ) = ∆v, , a = a x i
+ a y
j ., , x, , ∆t, , i
+, , ∆v y, ∆t, , a = i
lim, , (4.30a), , So, if the expressions for the coordinates x and, y are known as functions of time, we can use, these equations to find vx and vy., The magnitude of v is then, , tanθ =, , (4.32a), , ∆t, , Since ∆v = ∆v x
i + ∆v y
j, we have, , dx
dy, v = i
, +j, = v x i
+ v y
j., dt, dt, dx, dy, where v x =, , vy =, dt, dt, , Or,, , 2, , ∆v, ,
j, , (4.31a), (4.31b), , In terms of x and y, ax and ay can be expressed as, , 2018-19, , ∆t → 0, , Or,, , ∆v x, ∆t, , +
j lim, , ∆t → 0, , ∆vy, ∆t, , a = a x i
+ a y
j, , (4.32b), where, a x =, , dv x, , , ay =, , dv y, , (4.32c)*, dt, dt, As in the case of velocity, we can understand, graphically the limiting process used in defining, acceleration on a graph showing the path of the, object’s motion. This is shown in Figs. 4.15(a) to, (d). P represents the position of the object at, time t and P1, P2, P3 positions after time ∆t1, ∆t2,, ∆t3, respectively (∆t 1> ∆t2>∆t3). The velocity vectors, at points P, P1, P2, P3 are also shown in Figs. 4.15, (a), (b) and (c). In each case of ∆t, ∆v is obtained, using the triangle law of vector addition. By, definition, the direction of average acceleration, is the same as that of ∆v. We see that as ∆t, decreases, the direction of ∆v changes and, consequently, the direction of the acceleration, changes. Finally, in the limit ∆t g0 [Fig. 4.15(d)],, the average acceleration becomes the, instantaneous acceleration and has the direction, as shown.

Page 75 :
MOTION IN A PLANE, , 75, , x (m), , Fig. 4.15 The average acceleration for three time intervals (a) ∆t1, (b) ∆t2, and (c) ∆t3, (∆t1> ∆t2> ∆t3). (d) In the, limit ∆t g0, the average acceleration becomes the acceleration., , Note that in one dimension, the velocity and, the acceleration of an object are always along, the same straight line (either in the same, direction or in the opposite direction)., However, for motion in two or three, dimensions, velocity and acceleration vectors, may have any angle between 0° and 180°, between them., Example 4.4 The position of a particle is, given by, , t, , r = 3.0t ˆi + 2.0t 2ˆj + 5.0 kˆ, where t is in seconds and the coefficients, have the proper units for r to be in metres., (a) Find v(t) and a(t) of the particle. (b) Find, the magnitude and direction of v(t) at, t = 1.0 s., Answer, v( t ) =, , dr, , =, , dt, , ( 3.0 t i
+ 2.0t, dt, d, , 2, ,
j + 5.0 k,
, , ), , = 3.0
i + 4.0t
j, a (t) =, , dv, , = +4.0
j, , dt, , a = 4.0 m s–2 along y- direction, At t = 1.0 s, v = 3.0ˆi + 4.0ˆj, ,  vy , −1  4 , °,  = tan   ≅ 53 with x-axis., v, 3, , ,  x, t, , θ = tan-1 , , 4.8 MOTION IN A PLANE WITH CONSTANT, ACCELERATION, Suppose that an object is moving in x-y plane, and its acceleration a is constant. Over an, interval of time, the average acceleration will, equal this constant value. Now, let the velocity, of the object be v0 at time t = 0 and v at time t., Then, by definition, a=, , v − v0, v − v0, =, t−0, t, , Or, v = v 0 + at, In terms of components :, v x = vox + a x t, , (4.33a), , v y = v oy + a y t, , (4.33b), Let us now find how the position r changes with, time. We follow the method used in the onedimensional case. Let ro and r be the position, vectors of the particle at time 0 and t and let the, velocities at these instants be vo and v. Then,, over this time interval t, the average velocity is, (vo + v)/2. The displacement is the average, velocity multiplied by the time interval :, ,  ( v + at ) + v 0 ,  v + v0 , r − r0 = , t= 0, , t,  2 , 2, , , , 2, 2, -1, It’s magnitude is v = 3 + 4 = 5.0 m s, and direction is, , 2018-19

Page 76 :
76, , PHYSICS, , Or,, , r = r0 + v 0t +, , 1 2, at, 2, , Given x (t) = 84 m, t = ?, , 1 2, at, 2, , (4.34a), , It can be easily verified that the derivative of, dr, gives Eq.(4.33a) and it also, dt, satisfies the condition that at t=0, r = r o., Equation (4.34a) can be written in component, form as, , Eq. (4.34a), i.e., , x = x 0 + v ox t +, , 1, a xt 2, 2, , y = y0 + v oy t +, , 1, ayt 2, 2, , (4.34b), , One immediate interpretation of Eq.(4.34b) is that, the motions in x- and y-directions can be treated, independently of each other. That is, motion in, a plane (two-dimensions) can be treated as two, separate simultaneous one-dimensional, motions with constant acceleration along two, perpendicular directions. This is an important, result and is useful in analysing motion of objects, in two dimensions. A similar result holds for three, dimensions. The choice of perpendicular, directions is convenient in many physical, situations, as we shall see in section 4.10 for, projectile motion., Example 4.5 A particle starts from origin, at t = 0 with a velocity 5.0 î m/s and moves, in x-y plane under action of a force which, produces a constant acceleration of, (3.0i$ +2.0j$ ) m/s 2 . (a) What is the, , t, , y-coordinate of the particle at the instant, its x-coordinate is 84 m ? (b) What is the, speed of the particle at this time ?, , 5.0 t + 1.5 t 2 = 84 ⇒ t = 6 s, At t = 6 s, y = 1.0 (6)2 = 36.0 m, Now, the velocity v =, , dr, = (5.0 + 3.0 t ) ˆi + 2.0 t ˆj, dt, , At t = 6 s, v = 23.0i
+ 12.0
j, speed = v = 232 + 122 ≅ 26 m s−1 ., , t, , 4.9, , RELATIVE VELOCITY IN TWO, DIMENSIONS, The concept of relative velocity, introduced in, section 3.7 for motion along a straight line, can, be easily extended to include motion in a plane, or in three dimensions. Suppose that two objects, A and B are moving with velocities vA and vB, (each with respect to some common frame of, reference, say ground.). Then, velocity of object, A relative to that of B is :, vAB = vA – vB, (4.35a), and similarly, the velocity of object B relative to, that of A is :, vBA = vB – vA, Therefore, vAB = – vBA, (4.35b), and, v AB = v BA, t, , = v0t +, , (4.35c), , Example 4.6 Rain is falling vertically with, a speed of 35 m s–1. A woman rides a bicycle, with a speed of 12 m s–1 in east to west, direction. What is the direction in which, she should hold her umbrella ?, , Answer In Fig. 4.16 vr represents the velocity, of rain and vb , the velocity of the bicycle, the, woman is riding. Both these velocities are with, respect to the ground. Since the woman is riding, a bicycle, the velocity of rain as experienced by, , Answer From Eq. (4.34a) for r0 = 0, the position, of the particle is given by, r (t ) = v 0 t +, , 1 2, at, 2, , (, , ), , = 5.0ˆi t + (1/2) 3.0ˆi + 2.0ˆj t 2, , (, , ), , = 5.0 t + 1.5 t 2 ˆi + 1.0 t 2 ˆj, , Therefore,, , Fig. 4.16, , x (t ) = 5.0 t + 1.5 t 2, y (t ) = +1.0 t, , her is the velocity of rain relative to the velocity, of the bicycle she is riding. That is vrb = vr – vb, , 2, , 2018-19

Page 77 :
MOTION IN A PLANE, , 77, , This relative velocity vector as shown in, Fig. 4.16 makes an angle θ with the vertical. It is, given by, tan θ =, , vb, vr, , Or,, , θ ≅ 19, , =, , 12, , = 0.343, , 35, ,
, , Therefore, the woman should hold her, umbrella at an angle of about 19° with the, vertical towards the west., Note carefully the difference between this, Example and the Example 4.1. In Example 4.1,, the boy experiences the resultant (vector, sum) of two velocities while in this example,, the woman experiences the velocity of rain, relative to the bicycle (the vector difference, of the two velocities)., t, , Fig 4.17 Motion of an object projected with velocity, vo at angle θ0., , If we take the initial position to be the origin of, the reference frame as shown in Fig. 4.17, we, have :, xo = 0, yo = 0, , 4.10 PROJECTILE MOTION, As an application of the ideas developed in the, previous sections, we consider the motion of a, projectile. An object that is in flight after being, thrown or projected is called a projectile. Such, a projectile might be a football, a cricket ball, a, baseball or any other object. The motion of a, projectile may be thought of as the result of two, separate, simultaneously occurring components, of motions. One component is along a horizontal, direction without any acceleration and the other, along the vertical direction with constant, acceleration due to the force of gravity. It was, Galileo who first stated this independency of the, horizontal and the vertical components of, projectile motion in his Dialogue on the great, world systems (1632)., In our discussion, we shall assume that the, air resistance has negligible effect on the motion, of the projectile. Suppose that the projectile is, launched with velocity vo that makes an angle, θo with the x-axis as shown in Fig. 4.17., After the object has been projected, the, acceleration acting on it is that due to gravity, which is directed vertically downward:, a = −g j, , Or, ax = 0, ay = – g, (4.36), The components of initial velocity vo are :, vox = vo cos θo, voy= vo sin θo, (4.37), , Then, Eq.(4.34b) becomes :, and, , x = vox t = (vo cos θo ) t, y = (vo sin θo ) t – ( ½ )g t2, , (4.38), , The components of velocity at time t can be, obtained using Eq.(4.33b) :, vx = vox = vo cos θo, vy = vo sin θo – g t, , (4.39), , Equation (4.38) gives the x-, and y-coordinates, of the position of a projectile at time t in terms of, two parameters — initial speed vo and projection, angle θo. Notice that the choice of mutually, perpendicular x-, and y-directions for the, analysis of the projectile motion has resulted in, a simplification. One of the components of, velocity, i.e. x-component remains constant, throughout the motion and only the, y- component changes, like an object in free fall, in vertical direction. This is shown graphically, at few instants in Fig. 4.18. Note that at the point, of maximum height, v y = 0 and therefore,, , θ = tan −1, , vy, vx, , =0, , Equation of path of a projectile, What is the shape of the path followed by the, projectile? This can be seen by eliminating the, time between the expressions for x and y as, given in Eq. (4.38). We obtain:, , 2018-19

Page 78 :
78, , PHYSICS, , y = ( tan θ o ) x −, , g, 2 (v o cosθo ), , 2, , x2, , (4.40), , Now, since g, θo and vo are constants, Eq. (4.40), is of the form y = a x + b x2, in which a and b are, constants. This is the equation of a parabola,, i.e. the path of the projectile is a parabola, (Fig. 4.18)., , Or,, , hm =, , ( v 0 sin θ 0 ) 2, 2g, , (4.42), , Horizontal range of a projectile, The horizontal distance travelled by a projectile, from its initial position (x = y = 0) to the position, where it passes y = 0 during its fall is called the, horizontal range, R. It is the distance travelled, during the time of flight Tf . Therefore, the range, R is, R = (vo cos θo) (Tf ), =(vo cos θo) (2 vo sin θo)/g, 2, , Or,, , R=, , v0 sin 2θ 0, g, , (4.43a), , Equation (4.43a) shows that for a given, projection velocity vo , R is maximum when sin, 2θ0 is maximum, i.e., when θ0 = 450., The maximum horizontal range is, therefore,, 2, , Rm =, , t, Fig. 4.18 The path of a projectile is a parabola., , Time of maximum height, How much time does the projectile take to reach, the maximum height ? Let this time be denoted, by tm. Since at this point, vy= 0, we have from, Eq. (4.39):, vy = vo sinθo – g tm = 0, Or, tm = vo sinθo /g, (4.41a), The total time Tf during which the projectile is, in flight can be obtained by putting y = 0 in, Eq. (4.38). We get :, Tf = 2 (vo sin θo )/g, , (4.41b), , Tf is known as the time of flight of the projectile., We note that Tf = 2 tm , which is expected, because of the symmetry of the parabolic path., Maximum height of a projectile, , (, , y = hm = v0 sinθ 0, , ), ,  v sinθ  g  v sinθ 2, 0, 0,  0,  0, , − , , g, g, ,  2, , , 2018-19, , (4.43b), , g, , Example 4.7 Galileo, in his book Two new, sciences, stated that “for elevations which, exceed or fall short of 45° by equal, amounts, the ranges are equal”. Prove this, statement., , Answer For a projectile launched with velocity, vo at an angle θo , the range is given by, , R=, , v02 sin 2θ0, g, , Now, for angles, (45° + α ) and ( 45° – α), 2θo is, (90° + 2α ) and ( 90° – 2α ) , respectively. The, values of sin (90° + 2α ) and sin (90° – 2α ) are, the same, equal to that of cos 2α. Therefore,, ranges are equal for elevations which exceed or, fall short of 45° by equal amounts α., t, t, , The maximum height h m reached by the, projectile can be calculated by substituting, t = tm in Eq. (4.38) :, , v0, , Example 4.8 A hiker stands on the edge, of a cliff 490 m above the ground and, throws a stone horizontally with an initial, speed of 15 m s-1. Neglecting air resistance,, find the time taken by the stone to reach, the ground, and the speed with which it, hits the ground. (Take g = 9.8 m s-2 ).

Page 79 :
MOTION IN A PLANE, , 79, , Answer We choose the origin of the x-,and yaxis at the edge of the cliff and t = 0 s at the, instant the stone is thrown. Choose the positive, direction of x-axis to be along the initial velocity, and the positive direction of y-axis to be the, vertically upward direction. The x-, and ycomponents of the motion can be treated, independently. The equations of motion are :, x (t) = xo + vox t, y (t) = yo + voy t +(1/2) ay t2, Here, xo = yo = 0, voy = 0, ay = –g = –9.8 m s-2,, vox = 15 m s-1., The stone hits the ground when y(t) = – 490 m., – 490 m = –(1/2)(9.8) t2., This gives t =10 s., The velocity components are vx = vox and, vy = voy – g t, so that when the stone hits the ground :, vox = 15 m s–1, voy = 0 – 9.8 × 10 = – 98 m s–1, Therefore, the speed of the stone is, , v 2x + vy2 = 152 + 982 = 99 m s −1, , t, , Example 4.9 A cricket ball is thrown at a, speed of 28 m s–1 in a direction 30° above, the horizontal. Calculate (a) the maximum, height, (b) the time taken by the ball to, return to the same level, and (c) the, distance from the thrower to the point, where the ball returns to the same level., , t, , Answer (a) The maximum height is given by, hm =, , =, , (v0 sinθo )2, 2g, , =, , (28 sin 30°)2, 2 ( 9.8 ), , m, , 14 × 14, = 10.0 m, 2 × 9.8, , (v sin 2θ ), 2, o, , o, , g, , =, , While treating the topic of projectile motion,, we have stated that we assume that the, air resistance has no effect on the motion, of the projectile. You must understand what, the statement really means. Friction, force, due to viscosity, air resistance are all, dissipative forces. In the presence of any of, such forces opposing motion, any object will, lose some part of its initial energy and, consequently, momentum too. Thus, a, projectile that traverses a parabolic path, would certainly show deviation from its, idealised trajectory in the presence of air, resistance. It will not hit the ground with, the same speed with which it was projected, from it. In the absence of air resistance, the, x-component of the velocity remains, constant and it is only the y-component that, undergoes a continuous change. However,, in the presence of air resistance, both of, these would get affected. That would mean, that the range would be less than the one, given by Eq. (4.43). Maximum height, attained would also be less than that, predicted by Eq. (4.42). Can you then,, anticipate the change in the time of flight?, In order to avoid air resistance, we will, have to perform the experiment in vacuum, or under low pressure, which is not easy., When we use a phrase like ‘neglect air, resistance’, we imply that the change in, parameters such as range, height etc. is, much smaller than their values without air, resistance. The calculation without air, resistance is much simpler than that with, air resistance., 4.11 UNIFORM CIRCULAR MOTION, , (b) The time taken to return to the same level is, Tf = (2 vo sin θo )/g = (2× 28 × sin 30° )/9.8, = 28/9.8 s = 2.9 s, (c) The distance from the thrower to the point, where the ball returns to the same level is, R=, , Neglecting air resistance - what does, the assumption really mean?, , 28 × 28 × sin 60o, = 69 m, 9.8, t, , When an object follows a circular path at a, constant speed, the motion of the object is called, uniform circular motion. The word “uniform”, refers to the speed, which is uniform (constant), throughout the motion. Suppose an object is, moving with uniform speed v in a circle of radius, R as shown in Fig. 4.19. Since the velocity of the, object is changing continuously in direction, the, object undergoes acceleration. Let us find the, magnitude and the direction of this acceleration., , 2018-19

Page 80 :
80, , PHYSICS, , Fig. 4.19 Velocity and acceleration of an object in uniform circular motion. The time interval ∆t decreases from, (a) to (c) where it is zero. The acceleration is directed, at each point of the path, towards the centre of, the circle., , Let r and r′ be the position vectors and v and, v′ the velocities of the object when it is at point P, and P ′ as shown in Fig. 4.19(a). By definition,, velocity at a point is along the tangent at that, point in the direction of motion. The velocity, vectors v and v′ are as shown in Fig. 4.19(a1)., ∆v is obtained in Fig. 4.19 (a2) using the triangle, law of vector addition. Since the path is circular,, v is perpendicular to r and so is v′ to r′., Therefore, ∆v is perpendicular to ∆r. Since, , , average acceleration is along ∆v  a =, , , ∆v, , ∆v ,  , the, ∆t , , average acceleration a is perpendicular to ∆r. If, we place ∆v on the line that bisects the angle, between r and r′, we see that it is directed towards, the centre of the circle. Figure 4.19(b) shows the, same quantities for smaller time interval. ∆v and, hence a is again directed towards the centre., In Fig. 4.19(c), ∆t Ž 0 and the average, acceleration becomes the instantaneous, acceleration. It is directed towards the centre*., Thus, we find that the acceleration of an object, in uniform circular motion is always directed, towards the centre of the circle. Let us now find, the magnitude of the acceleration., The magnitude of a is, by definition, given by, ∆v, , a = lim, ∆t → 0 ∆t, Let the angle between position vectors r and, , *, , r′ be ∆θ. Since the velocity vectors v and v′ are, always perpendicular to the position vectors, the, angle between them is also ∆θ . Therefore, the, triangle CPP′ formed by the position vectors and, the triangle GHI formed by the velocity vectors, v, v′ and ∆v are similar (Fig. 4.19a). Therefore,, the ratio of the base-length to side-length for, one of the triangles is equal to that of the other, triangle. That is :, , v, , =, , ∆v = v, , Or,, , ∆r, R, ∆r, R, , Therefore,, a =, , ∆v, v ∆r, v, ∆r, = lim, =, lim, lim, ∆t → 0 ∆t, ∆ t → 0 R∆ t, R ∆t → 0 ∆t, , If ∆t is small, ∆θ will also be small and then arc, PP′ can be approximately taken to be|∆r|:, ∆r ≅ v∆t, , ∆r, ≅v, ∆t, , Or,, , ∆r, lim, =v, ∆t → 0 ∆t, , Therefore, the centripetal acceleration ac is :, , In the limit ∆tŽ0, ∆r becomes perpendicular to r. In this limit ∆v→ 0 and is consequently also perpendicular, to V. Therefore, the acceleration is directed towards the centre, at each point of the circular path., , 2018-19

Page 81 :
MOTION IN A PLANE, , v,   v = v2/R, R , , (4.44), , Thus, the acceleration of an object moving with, speed v in a circle of radius R has a magnitude, 2, v /R and is always directed towards the centre., This is why this acceleration is called centripetal, acceleration (a term proposed by Newton). A, thorough analysis of centripetal acceleration was, first published in 1673 by the Dutch scientist, Christiaan Huygens (1629-1695) but it was, probably known to Newton also some years earlier., “Centripetal” comes from a Greek term which means, ‘centre-seeking’. Since v and R are constant, the, magnitude of the centripetal acceleration is also, constant. However, the direction changes —, pointing always towards the centre. Therefore, a, centripetal acceleration is not a constant vector., We have another way of describing the, velocity and the acceleration of an object in, uniform circular motion. As the object moves, from P to P′ in time ∆t (= t′ – t), the line CP, (Fig. 4.19) turns through an angle ∆θ as shown, in the figure. ∆θ is called angular distance. We, define the angular speed ω (Greek letter omega), as the time rate of change of angular, displacement :, ω=, , ∆θ, , (4.45), , ∆t, , Now, if the distance travelled by the object, during the time ∆t is ∆s, i.e. PP′ is ∆s, then :, v=, , ∆s, ∆t, , but ∆s = R ∆θ. Therefore :, v=R, , ∆θ, ∆t, , v= Rω, , =Rω, , (4.46), , We can express centripetal acceleration ac in, terms of angular speed :, , ac =, , v, , 2, , 2, , =, , ω R, , R, , 2, , 2, , =ω R, , R, , 2, , ac = ω R, , (4.47), , The time taken by an object to make one revolution, is known as its time period T and the number of, revolution made in one second is called its, frequency ν (=1/T ). However, during this time the, distance moved by the object is s = 2πR., Therefore, v = 2πR/T =2πRν, (4.48), In terms of frequency ν, we have, ω = 2πν, v = 2πRν, ac = 4π2 ν2R, t, , ac =, , 81, , (4.49), , Example 4.10 An insect trapped in a, circular groove of radius 12 cm moves along, the groove steadily and completes 7, revolutions in 100 s. (a) What is the, angular speed, and the linear speed of the, motion? (b) Is the acceleration vector a, constant vector ? What is its magnitude ?, , Answer This is an example of uniform circular, motion. Here R = 12 cm. The angular speed ω is, given by, ω = 2π/T = 2π × 7/100 = 0.44 rad/s, The linear speed v is :, v =ω R = 0.44 s-1 × 12 cm = 5.3 cm s-1, The direction of velocity v is along the tangent, to the circle at every point. The acceleration is, directed towards the centre of the circle. Since, this direction changes continuously,, acceleration here is not a constant vector., However, the magnitude of acceleration is, constant:, a = ω2 R = (0.44 s–1)2 (12 cm), = 2.3 cm s-2, , 2018-19, , t

Page 82 :
82, , PHYSICS, , SUMMARY, 1., 2., 3., , 4., 5., , 6., , 7., 8., , 9., , Scalar quantities are quantities with magnitudes only. Examples are distance, speed,, mass and temperature., Vector quantities are quantities with magnitude and direction both. Examples are, displacement, velocity and acceleration. They obey special rules of vector algebra., A vector A multiplied by a real number λ is also a vector, whose magnitude is λ times, the magnitude of the vector A and whose direction is the same or opposite depending, upon whether λ is positive or negative., Two vectors A and B may be added graphically using head-to-tail method or parallelogram, method., Vector addition is commutative :, A+B=B+A, It also obeys the associative law :, (A + B) + C = A + (B + C), A null or zero vector is a vector with zero magnitude. Since the magnitude is zero, we, don’t have to specify its direction. It has the properties :, A+0=A, λ0 = 0, 0A=0, The subtraction of vector B from A is defined as the sum of A and –B :, A – B = A+ (–B), A vector A can be resolved into component along two given vectors a and b lying in the, same plane :, A =λa +µb, where λ and µ are real numbers., A unit vector associated with a vector A has magnitude 1 and is along the vector A:, , n̂ =, , 10., , A, A, ,
are vectors of unit magnitude and point in the direction of, The unit vectors
i,
j, k, the x-, y-, and z-axes, respectively in a right-handed coordinate system., A vector A can be expressed as, A = A i
+ A
j, x, , y, , where Ax, Ay are its components along x-, and y -axes. If vector A makes an angle θ, with the x-axis, then Ax = A cos θ, Ay=A sin θ and A = A =, , A x2 + Ay2 , tanθ =, , Ay, Ax, , ., , 11., , Vectors can be conveniently added using analytical method. If sum of two vectors A, and B, that lie in x-y plane, is R, then :, Ry = Ay + By, R = Rx i
+ Ry
j , where, Rx = Ax + Bx, and, , 12., , The position vector of an object in x-y plane is given by r = x i
+ y
j, displacement from position r to position r’ is given by, ∆r = r′− r, , and the, , = ( x ′ − x ) i
+ (y ′ − y )
j, 13., , = ∆x i
+ ∆y
j, If an object undergoes a displacement ∆r in time ∆t, its average velocity is given by, , ∆r, v=, , ∆t, , . The velocity of an object at time t is the limiting value of the average velocity, , 2018-19

Page 83 :
MOTION IN A PLANE, , 83, , as ∆t tends to zero :, ∆r dr, =, v = lim, . It can be written in unit vector notation as :, ∆t → 0 ∆t, dt, dx, dy, dz,
, ,v =, ,v =, v = v x i
+ v y
j + v z k, where vx =, dt y dt z dt, When position of an object is plotted on a coordinate system, v is always tangent to, the curve representing the path of the object., , 14., , If the velocity of an object changes from v to v′in time ∆t, then its average acceleration, v − v' ∆v, =, is given by: a =, ∆t, ∆t, The acceleration a at any time t is the limiting value of a as ∆t Ž0 :, lim ∆v dv, a=, =, ∆t → 0 ∆t, dt,
, In component form, we have : a = a
i + a
j + a k, x, , where, a x, 15., , y, , z, , dvy, dv x, dvz, , ay =, , az =, =, dt, dt, dt, , If an object is moving in a plane with constant acceleration a = a =, , a x2 + a y2, , and, , its position vector at time t = 0 is ro, then at any other time t, it will be at a point given, by:, , r = ro + v ot +, , 1 2, at, 2, , and its velocity is given by :, v = vo + a t, where vo is the velocity at time t = 0, In component form :, , x = x o + vox t +, y = yo + voy t +, , 1, ax t 2, 2, , 1, ay t 2, 2, , v x = v ox + a x t, , v y = v oy + a y t, , 16., , Motion in a plane can be treated as superposition of two separate simultaneous onedimensional motions along two perpendicular directions, An object that is in flight after being projected is called a projectile. If an object is, projected with initial velocity vo making an angle θo with x-axis and if we assume its, initial position to coincide with the origin of the coordinate system, then the position, and velocity of the projectile at time t are given by :, x = (vo cos θo) t, y = (vo sin θo) t − (1/2) g t2, vx = vox = vo cos θo, vy = vo sin θo − g t, The path of a projectile is parabolic and is given by :, , y = ( tanθ0 ) x –, , gx 2, 2 (v o cos θo ), , 2, , The maximum height that a projectile attains is :, , 2018-19

Page 84 :
84, , PHYSICS, , hm =, , (vo, , 2, , sinqo ), , 2g, The time taken to reach this height is :, tm =, , vo sinθ o, g, , The horizontal distance travelled by a projectile from its initial position to the position, it passes y = 0 during its fall is called the range, R of the projectile. It is :, , vo2, sin 2θo, g, When an object follows a circular path at constant speed, the motion of the object is, called uniform circular motion. The magnitude of its acceleration is ac = v2 /R. The, direction of ac is always towards the centre of the circle., The angular speed ω, is the rate of change of angular distance. It is related to velocity, v by v = ω R. The acceleration is ac = ω 2R., If T is the time period of revolution of the object in circular motion and ν is its, frequency, we have ω = 2π ν, v = 2πνR, ac = 4π2ν2R, R=, , 17., , 2018-19

Page 85 :
MOTION IN A PLANE, , 85, , POINTS TO PONDER, 1. The path length traversed by an object between two points is, in general, not the same as, the magnitude of displacement. The displacement depends only on the end points; the, path length (as the name implies) depends on the actual path. The two quantities are, equal only if the object does not change its direction during the course of motion. In all, other cases, the path length is greater than the magnitude of displacement., 2. In view of point 1 above, the average speed of an object is greater than or equal to the, magnitude of the average velocity over a given time interval. The two are equal only if the, path length is equal to the magnitude of displacement., 3. The vector equations (4.33a) and (4.34a) do not involve any choice of axes. Of course,, you can always resolve them along any two independent axes., 4. The kinematic equations for uniform acceleration do not apply to the case of uniform, circular motion since in this case the magnitude of acceleration is constant but its, direction is changing., 5. An object subjected to two velocities v1 and v2 has a resultant velocity v = v1 + v2. Take, care to distinguish it from velocity of object 1 relative to velocity of object 2 : v12= v1 − v2., Here v1 and v2 are velocities with reference to some common reference frame., 6. The resultant acceleration of an object in circular motion is towards the centre only if, the speed is constant., 7. The shape of the trajectory of the motion of an object is not determined by the acceleration, alone but also depends on the initial conditions of motion ( initial position and initial, velocity). For example, the trajectory of an object moving under the same acceleration, due to gravity can be a straight line or a parabola depending on the initial conditions., , EXERCISES, 4.1, , 4.2, , 4.3, , 4.4, , 4.5, , 4.6, , State, for each of the following physical quantities, if it is a scalar or a vector :, volume, mass, speed, acceleration, density, number of moles, velocity, angular, frequency, displacement, angular velocity., Pick out the two scalar quantities in the following list :, force, angular momentum, work, current, linear momentum, electric field, average, velocity, magnetic moment, relative velocity., Pick out the only vector quantity in the following list :, Temperature, pressure, impulse, time, power, total path length, energy, gravitational, potential, coefficient of friction, charge., State with reasons, whether the following algebraic operations with scalar and vector, physical quantities are meaningful :, (a) adding any two scalars, (b) adding a scalar to a vector of the same dimensions ,, (c) multiplying any vector by any scalar, (d) multiplying any two scalars, (e) adding any, two vectors, (f) adding a component of a vector to the same vector., Read each statement below carefully and state with reasons, if it is true or false :, (a) The magnitude of a vector is always a scalar, (b) each component of a vector is, always a scalar, (c) the total path length is always equal to the magnitude of the, displacement vector of a particle. (d) the average speed of a particle (defined as total, path length divided by the time taken to cover the path) is either greater or equal to, the magnitude of average velocity of the particle over the same interval of time, (e), Three vectors not lying in a plane can never add up to give a null vector., Establish the following vector inequalities geometrically or otherwise :, (a), , |a+b| < |a| + |b|, , (b), , |a+b| > ||a| −|b||, , 2018-19

Page 86 :
86, , PHYSICS, , 4.7, , 4.8, , 4.9, , (c), , |a−, − b| < |a| + |b|, , (d), , |a−, − b| >, , ||a| − |b||, , When does the equality sign above apply?, Given a + b + c + d = 0, which of the following statements, are correct :, (a) a, b, c, and d must each be a null vector,, (b) The magnitude of (a + c) equals the magnitude of, ( b + d),, (c) The magnitude of a can never be greater than the, sum of the magnitudes of b, c, and d,, (d) b + c must lie in the plane of a and d if a and d are, not collinear, and in the line of a and d, if they are, collinear ?, Three girls skating on a circular ice ground of radius, 200 m start from a point P on the edge of the ground, and reach a point Q diametrically opposite to P following, different paths as shown in Fig. 4.20. What is the, magnitude of the displacement vector for each ? For, which girl is this equal to the actual length of, path skate ?, , Q, , Fig. 4.20, , A cyclist starts from the centre O of a circular park of radius 1 km, reaches the edge P, of the park, then cycles along the circumference, and returns to the centre along QO, as shown in Fig. 4.21. If the round trip takes 10 min, what is the (a) net displacement,, (b) average velocity, and (c) average speed of the cyclist ?, , Fig. 4.21, 4.10 On an open ground, a motorist follows a track that turns to his left by an angle of 600, after every 500 m. Starting from a given turn, specify the displacement of the motorist, at the third, sixth and eighth turn. Compare the magnitude of the displacement with, the total path length covered by the motorist in each case., 4.11 A passenger arriving in a new town wishes to go from the station to a hotel located, 10 km away on a straight road from the station. A dishonest cabman takes him along, a circuitous path 23 km long and reaches the hotel in 28 min. What is (a) the average, speed of the taxi, (b) the magnitude of average velocity ? Are the two equal ?, 4.12 Rain is falling vertically with a speed of 30 m s-1. A woman rides a bicycle with a speed, of 10 m s-1 in the north to south direction. What is the direction in which she should, hold her umbrella ?, 4.13 A man can swim with a speed of 4.0 km/h in still water. How long does he take to, cross a river 1.0 km wide if the river flows steadily at 3.0 km/h and he makes his, , 2018-19

Page 87 :
MOTION IN A PLANE, , 87, , strokes normal to the river current? How far down the river does he go when he, reaches the other bank ?, 4.14 In a harbour, wind is blowing at the speed of 72 km/h and the flag on the mast of a boat, anchored in the harbour flutters along the N-E direction. If the boat starts moving at a, speed of 51 km/h to the north, what is the direction of the flag on the mast of the boat ?, 4.15 The ceiling of a long hall is 25 m high. What is the maximum horizontal distance that, a ball thrown with a speed of 40 m s-1 can go without hitting the ceiling of the hall ?, 4.16 A cricketer can throw a ball to a maximum horizontal distance of 100 m. How much, high above the ground can the cricketer throw the same ball ?, 4.17 A stone tied to the end of a string 80 cm long is whirled in a horizontal circle with a, constant speed. If the stone makes 14 revolutions in 25 s, what is the magnitude and, direction of acceleration of the stone ?, 4.18 An aircraft executes a horizontal loop of radius 1.00 km with a steady speed of 900, km/h. Compare its centripetal acceleration with the acceleration due to gravity., 4.19 Read each statement below carefully and state, with reasons, if it is true or false :, (a) The net acceleration of a particle in circular motion is always along the radius of, the circle towards the centre, (b) The velocity vector of a particle at a point is always along the tangent to the path, of the particle at that point, (c) The acceleration vector of a particle in uniform circular motion averaged over one, cycle is a null vector, 4.20 The position of a particle is given by, , ˆ m, r = 3.0t ˆi − 2.0t 2 ˆj + 4.0 k, where t is in seconds and the coefficients have the proper units for r to be in metres., (a) Find the v and a of the particle? (b) What is the magnitude and direction of, velocity of the particle at t = 2.0 s ?, 4.21 A particle starts from the origin at t = 0 s with a velocity of 10.0
j m/s and moves in, , (, , ), , the x-y plane with a constant acceleration of 8.0
i + 2.0
j m s-2. (a) At what time is, the x- coordinate of the particle 16 m? What is the y-coordinate of the particle at, that time? (b) What is the speed of the particle at the time ?, 4.22
i and
j are unit vectors along x- and y- axis respectively. What is the magnitude, and direction of the vectors
i +
j , and
i −
j ? What are the components of a vector, A= 2 i
+ 3
j along the directions of
i +
j and
i −
j ? [You may use graphical method], 4.23 For any arbitrary motion in space, which of the following relations are true :, (a) vaverage = (1/2) (v (t1) + v (t2)), (b) v average = [r(t2) - r(t1) ] /(t2 – t1), (c) v (t) = v (0) + a t, (d) r (t) = r (0) + v (0) t + (1/2) a t2, (e) a average =[ v (t2) - v (t1 )] /( t2 – t1), (The ‘average’ stands for average of the quantity over the time interval t1 to t2), 4.24 Read each statement below carefully and state, with reasons and examples, if it is, true or false :, A scalar quantity is one that, (a) is conserved in a process, (b) can never take negative values, (c) must be dimensionless, (d) does not vary from one point to another in space, (e) has the same value for observers with different orientations of axes., 4.25 An aircraft is flying at a height of 3400 m above the ground. If the angle subtended at, a ground observation point by the aircraft positions 10.0 s apart is 30°, what is the, speed of the aircraft ?, , 2018-19

Page 88 :
88, , PHYSICS, , Additional Exercises, 4.26 A vector has magnitude and direction. Does it have a location in space ? Can it vary, with time ? Will two equal vectors a and b at different locations in space necessarily, have identical physical effects ? Give examples in support of your answer., 4.27 A vector has both magnitude and direction. Does it mean that anything that has, magnitude and direction is necessarily a vector ? The rotation of a body can be specified, by the direction of the axis of rotation, and the angle of rotation about the axis. Does, that make any rotation a vector ?, 4.28 Can you associate vectors with (a) the length of a wire bent into a loop, (b) a plane, area, (c) a sphere ? Explain., 4.29 A bullet fired at an angle of 30° with the horizontal hits the ground 3.0 km away. By, adjusting its angle of projection, can one hope to hit a target 5.0 km away ? Assume, the muzzle speed to be fixed, and neglect air resistance., 4.30 A fighter plane flying horizontally at an altitude of 1.5 km with speed 720 km/h passes, directly overhead an anti-aircraft gun. At what angle from the vertical should the gun, be fired for the shell with muzzle speed 600 m s-1 to hit the plane ? At what minimum, altitude should the pilot fly the plane to avoid being hit ? (Take g = 10 m s-2 )., 4.31 A cyclist is riding with a speed of 27 km/h. As he approaches a circular turn on the, road of radius 80 m, he applies brakes and reduces his speed at the constant rate of, 0.50 m/s every second. What is the magnitude and direction of the net acceleration of, the cyclist on the circular turn ?, 4.32 (a) Show that for a projectile the angle between the velocity and the x-axis as a function, of time is given by,  v0y − gt, θ (t ) = tan -1,  vox, , , , , , , (b) Shows that the projection angle θ0 for a projectile launched from the origin is, given by,  4h , θ 0 = tan-1  m ,  R , , where the symbols have their usual meaning., , 2018-19

Page 89 :
CHAPTER FIVE, , LAWS, , OF, , MOTION, , 5.1 INTRODUCTION, , 5.1, 5.2, 5.3, 5.4, 5.5, , Introduction, Aristotle’s fallacy, The law of inertia, Newton’s first law of motion, Newton’s second law of, motion, 5.6 Newton’s third law of motion, 5.7 Conservation of momentum, 5.8 Equilibrium of a particle, 5.9 Common forces in mechanics, 5.10 Circular motion, 5.11 Solving problems in, mechanics, Summary, Points to ponder, Exercises, Additional exercises, , In the preceding Chapter, our concern was to describe the, motion of a particle in space quantitatively. We saw that, uniform motion needs the concept of velocity alone whereas, non-uniform motion requires the concept of acceleration in, addition. So far, we have not asked the question as to what, governs the motion of bodies. In this chapter, we turn to this, basic question., Let us first guess the answer based on our common, experience. To move a football at rest, someone must kick it., To throw a stone upwards, one has to give it an upward, push. A breeze causes the branches of a tree to swing; a, strong wind can even move heavy objects. A boat moves in a, flowing river without anyone rowing it. Clearly, some external, agency is needed to provide force to move a body from rest., Likewise, an external force is needed also to retard or stop, motion. You can stop a ball rolling down an inclined plane by, applying a force against the direction of its motion., In these examples, the external agency of force (hands,, wind, stream, etc) is in contact with the object. This is not, always necessary. A stone released from the top of a building, accelerates downward due to the gravitational pull of the, earth. A bar magnet can attract an iron nail from a distance., This shows that external agencies (e.g. gravitational and, magnetic forces ) can exert force on a body even from a, distance., In short, a force is required to put a stationary body in, motion or stop a moving body, and some external agency is, needed to provide this force. The external agency may or may, not be in contact with the body., So far so good. But what if a body is moving uniformly (e.g., a skater moving straight with constant speed on a horizontal, ice slab) ? Is an external force required to keep a body in, uniform motion?, , 2018-19

Page 90 :
90, , PHYSICS, , 5.2 ARISTOTLE’S FALLACY, The question posed above appears to be simple., However, it took ages to answer it. Indeed, the, correct answer to this question given by Galileo, in the seventeenth century was the foundation, of Newtonian mechanics, which signalled the, birth of modern science., The Greek thinker, Aristotle (384 B.C– 322, B.C.), held the view that if a body is moving,, something external is required to keep it moving., According to this view, for example, an arrow, shot from a bow keeps flying since the air behind, the arrow keeps pushing it. The view was part of, an elaborate framework of ideas developed by, Aristotle on the motion of bodies in the universe., Most of the Aristotelian ideas on motion are now, known to be wrong and need not concern us., For our purpose here, the Aristotelian law of, motion may be phrased thus: An external force, is required to keep a body in motion., Aristotelian law of motion is flawed, as we shall, see. However, it is a natural view that anyone, would hold from common experience. Even a, small child playing with a simple (non-electric), toy-car on a floor knows intuitively that it needs, to constantly drag the string attached to the toycar with some force to keep it going. If it releases, the string, it comes to rest. This experience is, common to most terrestrial motion. External, forces seem to be needed to keep bodies in, motion. Left to themselves, all bodies eventually, come to rest., What is the flaw in Aristotle’s argument? The, answer is: a moving toy car comes to rest because, the external force of friction on the car by the floor, opposes its motion. To counter this force, the child, has to apply an external force on the car in the, direction of motion. When the car is in uniform, motion, there is no net external force acting on it:, the force by the child cancels the force ( friction), by the floor. The corollary is: if there were no friction,, the child would not be required to apply any force, to keep the toy car in uniform motion., The opposing forces such as friction (solids), and viscous forces (for fluids) are always present, in the natural world. This explains why forces, by external agencies are necessary to overcome, the frictional forces to keep bodies in uniform, motion. Now we understand where Aristotle, went wrong. He coded this practical experience, in the form of a basic argument. To get at the, , 2018-19, , true law of nature for forces and motion, one has, to imagine a world in which uniform motion is, possible with no frictional forces opposing. This, is what Galileo did., 5.3 THE LAW OF INERTIA, Galileo studied motion of objects on an inclined, plane. Objects (i) moving down an inclined plane, accelerate, while those (ii) moving up retard., (iii) Motion on a horizontal plane is an, intermediate situation. Galileo concluded that, an object moving on a frictionless horizontal, plane must neither have acceleration nor, retardation, i.e. it should move with constant, velocity (Fig. 5.1(a))., , (i), , (ii), , (iii), , Fig. 5.1(a), , Another experiment by Galileo leading to the, same conclusion involves a double inclined plane., A ball released from rest on one of the planes rolls, down and climbs up the other. If the planes are, smooth, the final height of the ball is nearly the, same as the initial height (a little less but never, greater). In the ideal situation, when friction is, absent, the final height of the ball is the same, as its initial height., If the slope of the second plane is decreased, and the experiment repeated, the ball will still, reach the same height, but in doing so, it will, travel a longer distance. In the limiting case, when, the slope of the second plane is zero (i.e. is a, horizontal) the ball travels an infinite distance., In other words, its motion never ceases. This is,, of course, an idealised situation (Fig. 5.1(b))., , Fig. 5.1(b) The law of inertia was inferred by Galileo, from observations of motion of a ball on a, double inclined plane.

Page 91 :
LAWS OF MOTION, , 91, , In practice, the ball does come to a stop after, moving a finite distance on the horizontal plane,, because of the opposing force of friction which, can never be totally eliminated. However, if there, were no friction, the ball would continue to move, with a constant velocity on the horizontal plane., Galileo thus, arrived at a new insight on, motion that had eluded Aristotle and those who, followed him. The state of rest and the state of, uniform linear motion (motion with constant, velocity) are equivalent. In both cases, there is, , accomplished almost single-handedly by Isaac, Newton, one of the greatest scientists of all times., Newton built on Galileo’s ideas and laid the, foundation of mechanics in terms of three laws, of motion that go by his name. Galileo’s law of, inertia was his starting point which he, formulated as the first law of motion:, Every body continues to be in its state, of rest or of uniform motion in a straight, line unless compelled by some external, force to act otherwise., , Ideas on Motion in Ancient Indian Science, Ancient Indian thinkers had arrived at an elaborate system of ideas on motion. Force, the cause of, motion, was thought to be of different kinds : force due to continuous pressure (nodan), as the force, of wind on a sailing vessel; impact (abhighat), as when a potter’s rod strikes the wheel; persistent, tendency (sanskara) to move in a straight line(vega) or restoration of shape in an elastic body;, transmitted force by a string, rod, etc. The notion of (vega) in the Vaisesika theory of motion perhaps, comes closest to the concept of inertia. Vega, the tendency to move in a straight line, was thought to, be opposed by contact with objects including atmosphere, a parallel to the ideas of friction and air, resistance. It was correctly summarised that the different kinds of motion (translational, rotational, and vibrational) of an extended body arise from only the translational motion of its constituent, particles. A falling leaf in the wind may have downward motion as a whole (patan) and also rotational, and vibrational motion (bhraman, spandan), but each particle of the leaf at an instant only has a, definite (small) displacement. There was considerable focus in Indian thought on measurement of, motion and units of length and time. It was known that the position of a particle in space can be, indicated by distance measured along three axes. Bhaskara (1150 A.D.) had introduced the concept, of ‘instantaneous motion’ (tatkaliki gati), which anticipated the modern notion of instantaneous, velocity using Differential Calculus. The difference between a wave and a current (of water) was clearly, understood; a current is a motion of particles of water under gravity and fluidity while a wave results, from the transmission of vibrations of water particles., , no net force acting on the body. It is incorrect to, assume that a net force is needed to keep a body, in uniform motion. To maintain a body in, uniform motion, we need to apply an external, force to ecounter the frictional force, so that, the two forces sum up to zero net external, force., To summarise, if the net external force is zero,, a body at rest continues to remain at rest and a, body in motion continues to move with a uniform, velocity. This property of the body is called, inertia. Inertia means ‘resistance to change’., A body does not change its state of rest or, uniform motion, unless an external force, compels it to change that state., 5.4 NEWTON’S FIRST LAW OF MOTION, Galileo’s simple, but revolutionary ideas, dethroned Aristotelian mechanics. A new, mechanics had to be developed. This task was, , The state of rest or uniform linear motion both, imply zero acceleration. The first law of motion can,, therefore, be simply expressed as:, If the net external force on a body is zero, its, acceleration is zero. Acceleration can be non, zero only if there is a net external force on, the body., Two kinds of situations are encountered in the, application of this law in practice. In some, examples, we know that the net external force, on the object is zero. In that case we can, conclude that the acceleration of the object is, zero. For example, a spaceship out in, interstellar space, far from all other objects and, with all its rockets turned off, has no net, external force acting on it. Its acceleration,, according to the first law, must be zero. If it is, in motion, it must continue to move with a, uniform velocity., , 2018-19

Page 92 :
92, , PHYSICS, , Galileo Galilei (1564 - 1642), Galileo Galilei, born in Pisa, Italy in 1564 was a key figure in the scientific revolution, in Europe about four centuries ago. Galileo proposed the concept of acceleration., From experiments on motion of bodies on inclined planes or falling freely, he, contradicted the Aristotelian notion that a force was required to keep a body in, motion, and that heavier bodies fall faster than lighter bodies under gravity. He, thus arrived at the law of inertia that was the starting point of the subsequent, epochal work of Isaac Newton., Galileo’s discoveries in astronomy were equally revolutionary. In 1609, he designed, his own telescope (invented earlier in Holland) and used it to make a number of, startling observations : mountains and depressions on the surface of the moon;, dark spots on the sun; the moons of Jupiter and the phases of Venus. He concluded, that the Milky Way derived its luminosity because of a large number of stars not visible to the naked eye., In his masterpiece of scientific reasoning : Dialogue on the Two Chief World Systems, Galileo advocated, the heliocentric theory of the solar system proposed by Copernicus, which eventually got universal, acceptance., With Galileo came a turning point in the very method of scientific inquiry. Science was no longer, merely observations of nature and inferences from them. Science meant devising and doing experiments, to verify or refute theories. Science meant measurement of quantities and a search for mathematical, relations between them. Not undeservedly, many regard Galileo as the father of modern science., , More often, however, we do not know all the, forces to begin with. In that case, if we know, that an object is unaccelerated (i.e. it is either, at rest or in uniform linear motion), we can infer, from the first law that the net external force on, the object must be zero. Gravity is everywhere., For terrestrial phenomena, in particular, every, object experiences gravitational force due to the, earth. Also objects in motion generally experience, friction, viscous drag, etc. If then, on earth, an, object is at rest or in uniform linear motion, it is, not because there are no forces acting on it, but, because the various external forces cancel out, i.e. add up to zero net external force., Consider a book at rest on a horizontal surface, Fig. (5.2(a)). It is subject to two external forces :, the force due to gravity (i.e. its weight W) acting, downward and the upward force on the book by, the table, the normal force R . R is a self-adjusting, force. This is an example of the kind of situation, mentioned above. The forces are not quite known, fully but the state of motion is known. We observe, the book to be at rest. Therefore, we conclude, from the first law that the magnitude of R equals, that of W. A statement often encountered is :, “Since W = R, forces cancel and, therefore, the book, is at rest”. This is incorrect reasoning. The correct, statement is : “Since the book is observed to be at, rest, the net external force on it must be zero,, according to the first law. This implies that the, , 2018-19, , normal force R must be equal and opposite to the, weight W ”., , Fig. 5.2 (a) a book at rest on the table, and (b) a car, moving with uniform velocity. The net force, is zero in each case., , Consider the motion of a car starting from, rest, picking up speed and then moving on a, smooth straight road with uniform speed (Fig., (5.2(b)). When the car is stationary, there is no, net force acting on it. During pick-up, it, accelerates. This must happen due to a net, external force. Note, it has to be an external force., The acceleration of the car cannot be accounted, for by any internal force. This might sound, surprising, but it is true. The only conceivable, external force along the road is the force of, friction. It is the frictional force that accelerates, the car as a whole. (You will learn about friction, in section 5.9). When the car moves with, constant velocity, there is no net external force.

Page 93 :
LAWS OF MOTION, , The property of inertia contained in the First, law is evident in many situations. Suppose we, are standing in a stationary bus and the driver, starts the bus suddenly. We get thrown, backward with a jerk. Why ? Our feet are in touch, with the floor. If there were no friction, we would, remain where we were, while the floor of the bus, would simply slip forward under our feet and the, back of the bus would hit us. However,, fortunately, there is some friction between the, feet and the floor. If the start is not too sudden,, i.e. if the acceleration is moderate, the frictional, force would be enough to accelerate our feet, along with the bus. But our body is not strictly, a rigid body. It is deformable, i.e. it allows some, relative displacement between different parts., What this means is that while our feet go with, the bus, the rest of the body remains where it is, due to inertia. Relative to the bus, therefore, we, are thrown backward. As soon as that happens,, however, the muscular forces on the rest of the, body (by the feet) come into play to move the body, along with the bus. A similar thing happens, when the bus suddenly stops. Our feet stop due, to the friction which does not allow relative, motion between the feet and the floor of the bus., But the rest of the body continues to move, forward due to inertia. We are thrown forward., The restoring muscular forces again come into, play and bring the body to rest., t, , Example 5.1 An astronaut accidentally, gets separated out of his small spaceship, accelerating in inter stellar space at a, constant rate of 100 m s–2. What is the, acceleration of the astronaut the instant after, he is outside the spaceship ? (Assume that, there are no nearby stars to exert, gravitational force on him.), , Answer Since there are no nearby stars to exert, gravitational force on him and the small, spaceship exerts negligible gravitational, attraction on him, the net force acting on the, astronaut, once he is out of the spaceship, is, zero. By the first law of motion the acceleration, of the astronaut is zero., t, 5.5 NEWTON’S SECOND LAW OF MOTION, The first law refers to the simple case when the, net external force on a body is zero. The second, law of motion refers to the general situation when, there is a net external force acting on the body., , 93, , It relates the net external force to the, acceleration of the body., Momentum, Momentum of a body is defined to be the product, of its mass m and velocity v, and is denoted, by p:, p=mv, (5.1), Momentum is clearly a vector quantity. The, following common experiences indicate the, importance of this quantity for considering the, effect of force on motion., • Suppose a light-weight vehicle (say a small, car) and a heavy weight vehicle (say a loaded, truck) are parked on a horizontal road. We all, know that a much greater force is needed to, push the truck than the car to bring them to, the same speed in same time. Similarly, a, greater opposing force is needed to stop a, heavy body than a light body in the same time,, if they are moving with the same speed., • If two stones, one light and the other heavy,, are dropped from the top of a building, a, person on the ground will find it easier to catch, the light stone than the heavy stone. The, mass of a body is thus an important, parameter that determines the effect of force, on its motion., • Speed is another important parameter to, consider. A bullet fired by a gun can easily, pierce human tissue before it stops, resulting, in casualty. The same bullet fired with, moderate speed will not cause much damage., Thus for a given mass, the greater the speed,, the greater is the opposing force needed to stop, the body in a certain time. Taken together,, the product of mass and velocity, that is, momentum, is evidently a relevant variable, of motion. The greater the change in the, momentum in a given time, the greater is the, force that needs to be applied., • A seasoned cricketer catches a cricket ball, coming in with great speed far more easily, than a novice, who can hurt his hands in the, act. One reason is that the cricketer allows a, longer time for his hands to stop the ball. As, you may have noticed, he draws in the hands, backward in the act of catching the ball (Fig., 5.3). The novice, on the other hand, keeps, his hands fixed and tries to catch the ball, almost instantly. He needs to provide a much, greater force to stop the ball instantly, and, , 2018-19

Page 94 :
94, , PHYSICS, , this hurts.The conclusion is clear: force not, only depends on the change in momentum,, but also on how fast the change is brought, about. The same change in momentum, brought about in a shorter time needs a, greater applied force. In short, the greater the, rate of change of momentum, the greater is, the force., , Fig. 5.3 Force not only depends on the change in, momentum but also on how fast the change, is brought about. A seasoned cricketer draws, in his hands during a catch, allowing greater, time for the ball to stop and hence requires a, smaller force., , • Observations confirm that the product of, mass and velocity (i.e. momentum) is basic to, the effect of force on motion. Suppose a fixed, force is applied for a certain interval of time, on two bodies of different masses, initially at, rest, the lighter body picks up a greater speed, than the heavier body. However, at the end of, the time interval, observations show that each, body acquires the same momentum. Thus, the same force for the same time causes, the same change in momentum for, different bodies. This is a crucial clue to the, second law of motion., • In the preceding observations, the vector, character of momentum has not been evident., In the examples so far, momentum and change, in momentum both have the same direction., But this is not always the case. Suppose a, stone is rotated with uniform speed in a, horizontal plane by means of a string, the, magnitude of momentum is fixed, but its, direction changes (Fig. 5.4). A force is needed, to cause this change in momentum vector., , 2018-19, , This force is provided by our hand through, the string. Experience suggests that our hand, needs to exert a greater force if the stone is, rotated at greater speed or in a circle of, smaller radius, or both. This corresponds to, greater acceleration or equivalently a greater, rate of change in momentum vector. This, suggests that the greater the rate of change, in momentum vector the greater is the force, applied., , Fig. 5.4 Force is necessary for changing the direction, of momentum, even if its magnitude is, constant. We can feel this while rotating a, stone in a horizontal circle with uniform speed, by means of a string., , These qualitative observations lead to the, second law of motion expressed by Newton as, follows :, The rate of change of momentum of a body is, directly proportional to the applied force and, takes place in the direction in which the force, acts., Thus, if under the action of a force F for time, interval ∆t, the velocity of a body of mass m, changes from v to v + ∆v i.e. its initial momentum, p = m v changes by ∆p = m ∆v . According to the, Second Law,, , F∝, , ∆p, ∆p, or F = k, ∆t, ∆t, , where k is a constant of proportionality. Taking, , ∆p, becomes the, ∆t, derivative or differential co-efficient of p with, , the limit ∆t → 0, the term, , respect to t, denoted by, , dp, . Thus, dt

Page 95 :
LAWS OF MOTION, , dp, dt, For a body of fixed mass m,, F =k, , dp, d, dv, =, = ma, (m v ) = m, dt, dt, dt, , 95, , on the particle and a stands for acceleration, of the particle. It turns out, however, that the, law in the same form applies to a rigid body or,, even more generally, to a system of particles., In that case, F refers to the total external force, on the system and a refers to the acceleration, of the system as a whole. More precisely, a is, the acceleration of the centre of mass of the, system about which we shall study in detail in, chapter 7. Any internal forces in the system, are not to be included in F., , (5.2), , (5.3), , i.e the Second Law can also be written as, F = kma, (5.4), which shows that force is proportional to the, product of mass m and acceleration a., The unit of force has not been defined so far., In fact, we use Eq. (5.4) to define the unit of force., We, therefore, have the liberty to choose any, constant value for k. For simplicity, we choose, k = 1. The second law then is, dp, = ma, dt, , (5.5), , In SI unit force is one that causes an acceleration, of 1 m s-2 to a mass of 1 kg. This unit is known as, newton : 1 N = 1 kg m s-2., Let us note at this stage some important points, about the second law :, 1. In the second law, F = 0 implies a = 0. The, second law is obviously consistent with the, first law., 2. The second law of motion is a vector law. It is, equivalent to three equations, one for each, component of the vectors :, Fx =, Fy =, , dp x, dt, dp y, , = ma x, , = ma y, dt, dp, Fz = z =m a z, dt, , (5.6), , This means that if a force is not parallel to, the velocity of the body, but makes some angle, with it, it changes only the component of, velocity along the direction of force. The, component of velocity normal to the force, remains unchanged. For example, in the, motion of a projectile under the vertical, gravitational force, the horizontal component, of velocity remains unchanged (Fig. 5.5)., 3. The second law of motion given by Eq. (5.5) is, applicable to a single point particle. The force, F in the law stands for the net external force, , Fig. 5.5, , Acceleration at an instant is determined by, the force at that instant. The moment after a, stone is dropped out of an accelerated train,, it has no horizontal acceleration or force, if, air resistance is neglected. The stone carries, no memory of its acceleration with the train, a moment ago., , 4. The second law of motion is a local relation, which means that force F at a point in space, (location of the particle) at a certain instant, of time is related to a at that point at that, instant. Acceleration here and now is, determined by the force here and now, not by, any history of the motion of the particle, (See Fig. 5.5)., t, , F=, , Example 5.2 A bullet of mass 0.04 kg, moving with a speed of 90 m s–1 enters a, heavy wooden block and is stopped after a, distance of 60 cm. What is the average, resistive force exerted by the block on the, bullet?, , Answer The retardation ‘a’ of the bullet, (assumed constant) is given by, a=, , 2018-19, , – 90 × 90, –u2, m s −2 = – 6750 m s−2, =, 2 × 0.6, 2s

Page 96 :
96, , PHYSICS, , = 0.04 kg × 6750 m s-2 = 270 N, The actual resistive force, and therefore,, retardation of the bullet may not be uniform. The, answer therefore, only indicates the average, resistive force., t, Example 5.3 The motion of a particle of, , t, , 1 2, gt . Find, 2, the force acting on the particle., , mass m is described by y = ut +, , Answer We know, , y = ut +, , Answer Change in momentum, = 0.15 × 12–(–0.15×12), Impulse = 3.6 N s,, in the direction from the batsman to the bowler., , dy, = u + gt, dt, , dv, =g, dt, Then the force is given by Eq. (5.5), F = ma = mg, Thus the given equation describes the motion, of a particle under acceleration due to gravity, and y is the position coordinate in the direction, of g., t, acceleration, a =, , Impulse, We sometimes encounter examples where a large, force acts for a very short duration producing a, finite change in momentum of the body. For, example, when a ball hits a wall and bounces, back, the force on the ball by the wall acts for a, very short time when the two are in contact, yet, the force is large enough to reverse the momentum, of the ball. Often, in these situations, the force, and the time duration are difficult to ascertain, separately. However, the product of force and time,, which is the change in momentum of the body, remains a measurable quantity. This product is, called impulse:, Impulse = Force × time duration, = Change in momentum, , Example 5.4 A batsman hits back a ball, straight in the direction of the bowler without, changing its initial speed of 12 m s–1., If the mass of the ball is 0.15 kg, determine, the impulse imparted to the ball. (Assume, linear motion of the ball), , = 3.6 N s,, , 1 2, gt, 2, , Now,, , v=, , ordinary forces. Newtonian mechanics has no, such distinction. Impulsive force is like any other, force – except that it is large and acts for a short, time., t, , The retarding force, by the second law of, motion, is, , (5.7), , A large force acting for a short time to produce a, finite change in momentum is called an impulsive, force. In the history of science, impulsive forces, were put in a conceptually different category from, , 2018-19, , This is an example where the force on the ball, by the batsman and the time of contact of the, ball and the bat are difficult to know, but the, impulse is readily calculated., t, 5.6 NEWTON’S THIRD LAW OF MOTION, The second law relates the external force on a, body to its acceleration. What is the origin of the, external force on the body ? What agency, provides the external force ? The simple answer, in Newtonian mechanics is that the external, force on a body always arises due to some other, body. Consider a pair of bodies A and B. B gives, rise to an external force on A. A natural question, is: Does A in turn give rise to an external force, on B ? In some examples, the answer seems, clear. If you press a coiled spring, the spring is, compressed by the force of your hand. The, compressed spring in turn exerts a force on your, hand and you can feel it. But what if the bodies, are not in contact ? The earth pulls a stone, downwards due to gravity. Does the stone exert, a force on the earth ? The answer is not obvious, since we hardly see the effect of the stone on the, earth. The answer according to Newton is: Yes,, the stone does exert an equal and opposite force, on the earth. We do not notice it since the earth, is very massive and the effect of a small force on, its motion is negligible., Thus, according to Newtonian mechanics,, force never occurs singly in nature. Force is the, mutual interaction between two bodies. Forces

Page 97 :
LAWS OF MOTION, , 97, , comes before reaction i.e action is the cause, and reaction the effect. There is no causeeffect relation implied in the third law. The, force on A by B and the force on B by A act, at the same instant. By the same reasoning,, any one of them may be called action and the, other reaction., 3. Action and reaction forces act on different, bodies, not on the same body. Consider a pair, of bodies A and B. According to the third law,, , always occur in pairs. Further, the mutual forces, between two bodies are always equal and, opposite. This idea was expressed by Newton in, the form of the third law of motion., To every action, there is always an equal and, opposite reaction., Newton’s wording of the third law is so crisp and, beautiful that it has become a part of common, language. For the same reason perhaps,, misconceptions about the third law abound. Let, us note some important points about the third, law, particularly in regard to the usage of the, terms : action and reaction., 1. The terms action and reaction in the third law, mean nothing else but ‘force’. Using different, terms for the same physical concept, can sometimes be confusing. A simple, and clear way of stating the third law is as, follows :, , FAB = – FBA, , (5.8), , (force on A by B) = – (force on B by A), Thus if we are considering the motion of any, one body (A or B), only one of the two forces is, relevant. It is an error to add up the two forces, and claim that the net force is zero., However, if you are considering the system, of two bodies as a whole, FAB and FBA are, internal forces of the system (A + B). They add, up to give a null force. Internal forces in a, body or a system of particles thus cancel away, in pairs. This is an important fact that, enables the second law to be applicable to a, body or a system of particles (See Chapter 7)., , Forces always occur in pairs. Force on a, body A by B is equal and opposite to the, force on the body B by A., 2. The terms action and reaction in the third law, may give a wrong impression that action, , Isaac Newton (1642 – 1727), Isaac Newton was born in Woolsthorpe, England in 1642, the year Galileo died., His extraordinary mathematical ability and mechanical aptitude remained hidden, from others in his school life. In 1662, he went to Cambridge for undergraduate, studies. A plague epidemic in 1665 forced the university town to close and Newton, had to return to his mother’s farm. There in two years of solitude, his dormant, creativity blossomed in a deluge of fundamental discoveries in mathematics and, physics : binomial theorem for negative and fractional exponents, the beginning of, calculus, the inverse square law of gravitation, the spectrum of white light, and so, on. Returning to Cambridge, he pursued his investigations in optics and devised a, reflecting telescope., In 1684, encouraged by his friend Edmund Halley, Newton embarked on writing what was to be one of, the greatest scientific works ever published : The Principia Mathematica. In it, he enunciated the three, laws of motion and the universal law of gravitation, which explained all the three Kepler’s laws of, planetary motion. The book was packed with a host of path-breaking achievements : basic principles of, fluid mechanics, mathematics of wave motion, calculation of masses of the earth, the sun and other, planets, explanation of the precession of equinoxes, theory of tides, etc. In 1704, Newton brought out, another masterpiece Opticks that summarized his work on light and colour., The scientific revolution triggered by Copernicus and steered vigorously ahead by Kepler and Galileo, was brought to a grand completion by Newton. Newtonian mechanics unified terrestrial and celestial, phenomena. The same mathematical equation governed the fall of an apple to the ground and the, motion of the moon around the earth. The age of reason had dawned., , 2018-19

Page 98 :
98, , PHYSICS, , Example 5.5 Two identical billiard balls, strike a rigid wall with the same speed but, at different angles, and get reflected without, any change in speed, as shown in Fig. 5.6., What is (i) the direction of the force on the, wall due to each ball? (ii) the ratio of the, magnitudes of impulses imparted to the, balls by the wall ?, , magnitude of force cannot be ascertained since, the small time taken for the collision has not, been specified in the problem., Case (b), , ( px ), , initial, , ( px ), , final, , ( ), , = m u cos 30
, py, , initial, , ( ), , = – m u cos 30
, py, , final, , =, , − m u sin 30
, , = − m u sin 30
, , t, , Note, while px changes sign after collision, py, does not. Therefore,, x-component of impulse = –2 m u cos 30°, y-component of impulse = 0, The direction of impulse (and force) is the same, as in (a) and is normal to the wall along the, negative x direction. As before, using Newton’s, third law, the force on the wall due to the ball is, normal to the wall along the positive x direction., The ratio of the magnitudes of the impulses, imparted to the balls in (a) and (b) is, , Fig. 5.6, , Answer An instinctive answer to (i) might be, that the force on the wall in case (a) is normal to, the wall, while that in case (b) is inclined at 30°, to the normal. This answer is wrong. The force, on the wall is normal to the wall in both cases., How to find the force on the wall? The trick is, to consider the force (or impulse) on the ball, due to the wall using the second law, and then, use the third law to answer (i). Let u be the speed, of each ball before and after collision with the, wall, and m the mass of each ball. Choose the x, and y axes as shown in the figure, and consider, the change in momentum of the ball in each, case :, Case (a), , ( px ), , ( px ), , initial, , final, , = mu, , = −mu, , (p ), (p ), , y initial, , y final, , =0, , =0, , Impulse is the change in momentum vector., Therefore,, x-component of impulse = – 2 m u, y-component of impulse = 0, Impulse and force are in the same direction., Clearly, from above, the force on the ball due to, the wall is normal to the wall, along the negative, x-direction. Using Newton’s third law of motion,, the force on the wall due to the ball is normal to, the wall along the positive x-direction. The, , 2018-19, , (, , ), , 2 m u/ 2 m u cos 30
=, , 2, ≈ 1.2, 3, , t, , 5.7 CONSERVATION OF MOMENTUM, The second and third laws of motion lead to, an important consequence: the law of, conservation of momentum. Take a familiar, example. A bullet is fired from a gun. If the force, on the bullet by the gun is F, the force on the gun, by the bullet is – F, according to the third law., The two forces act for a common interval of time, ∆t. According to the second law, F ∆t is the, change in momentum of the bullet and – F ∆t is, the change in momentum of the gun. Since, initially, both are at rest, the change in, momentum equals the final momentum for each., Thus if pb is the momentum of the bullet after, firing and pg is the recoil momentum of the gun,, pg = – pb i.e. pb + pg = 0. That is, the total, momentum of the (bullet + gun) system is, conserved., Thus in an isolated system (i.e. a system with, no external force), mutual forces between pairs, of particles in the system can cause momentum, change in individual particles, but since the, mutual forces for each pair are equal and, opposite, the momentum changes cancel in pairs, and the total momentum remains unchanged., This fact is known as the law of conservation, of momentum :

Page 99 :
LAWS OF MOTION, , 99, , The total momentum of an isolated system, of interacting particles is conserved., An important example of the application of the, law of conservation of momentum is the collision, of two bodies. Consider two bodies A and B, with, initial momenta pA and pB. The bodies collide,, get apart, with final momenta p′ A and p′ B, respectively. By the Second Law, FAB ∆t = p′A − p A and, , FBA ∆t = p′B − p B, (where we have taken a common interval of time, for both forces i.e. the time for which the two, bodies are in contact.), Since FAB = − FBA by the third law,, , p′A − p A = −( p′B − p B ), i.e., , p′A + p′B = p A + p B, , (5.9), , which shows that the total final momentum of, the isolated system equals its initial momentum., Notice that this is true whether the collision is, elastic or inelastic. In elastic collisions, there is, a second condition that the total initial kinetic, energy of the system equals the total final kinetic, energy (See Chapter 6)., , Fig. 5.7 Equilibrium under concurrent forces., , In other words, the resultant of any two forces, say F1 and F2, obtained by the parallelogram, law of forces must be equal and opposite to the, third force, F3. As seen in Fig. 5.7, the three, forces in equilibrium can be represented by the, sides of a triangle with the vector arrows taken, in the same sense. The result can be, generalised to any number of forces. A particle, is in equilibrium under the action of forces F1,, F2,... Fn if they can be represented by the sides, of a closed n-sided polygon with arrows directed, in the same sense., Equation (5.11) implies that, F1x + F2x + F3x = 0, F1y + F2y + F3y = 0, F1z + F2z + F3z = 0, , where F1x, F1y and F1z are the components of F1, along x, y and z directions respectively., t, , 5.8 EQUILIBRIUM OF A PARTICLE, Equilibrium of a particle in mechanics refers to, the situation when the net external force on the, particle is zero.* According to the first law, this, means that, the particle is either at rest or in, uniform motion., If two forces F1 and F2, act on a particle,, equilibrium requires, F1 = − F2, , (5.12), , Example 5.6 See Fig. 5.8. A mass of 6 kg, is suspended by a rope of length 2 m, from the ceiling. A force of 50 N in the, horizontal direction is applied at the midpoint P of the rope, as shown. What is the, angle the rope makes with the vertical in, equilibrium ? (Take g = 10 m s-2). Neglect, the mass of the rope., , (5.10), , i.e. the two forces on the particle must be equal, and opposite. Equilibrium under three, concurrent forces F1, F2 and F3 requires that, the vector sum of the three forces is zero., F1 + F2 + F3 = 0, , *, , (5.11), , (a), , (b), Fig. 5.8, , (c), , Equilibrium of a body requires not only translational equilibrium (zero net external force) but also rotational, equilibrium (zero net external torque), as we shall see in Chapter 7., , 2018-19

Page 100 :
100, , PHYSICS, , Answer Figures 5.8(b) and 5.8(c) are known as, free-body diagrams. Figure 5.8(b) is the free-body, diagram of W and Fig. 5.8(c) is the free-body, diagram of point P., Consider the equilibrium of the weight W., Clearly,T2 = 6 × 10 = 60 N., Consider the equilibrium of the point P under, the action of three forces - the tensions T1 and, T2, and the horizontal force 50 N. The horizontal, and vertical components of the resultant force, must vanish separately :, T1 cos θ = T2 = 60 N, T1 sin θ = 50 N, which gives that, , Note the answer does not depend on the length, of the rope (assumed massless) nor on the point, at which the horizontal force is applied., t, 5.9 COMMON FORCES IN MECHANICS, In mechanics, we encounter several kinds of, forces. The gravitational force is, of course,, pervasive. Every object on the earth experiences, the force of gravity due to the earth. Gravity also, governs the motion of celestial bodies. The, gravitational force can act at a distance without, the need of any intervening medium., All the other forces common in mechanics are, contact forces.* As the name suggests, a contact, force on an object arises due to contact with some, other object: solid or fluid. When bodies are in, contact (e.g. a book resting on a table, a system, of rigid bodies connected by rods, hinges and, , other types of supports), there are mutual, contact forces (for each pair of bodies) satisfying, the third law. The component of contact force, normal to the surfaces in contact is called, normal reaction. The component parallel to the, surfaces in contact is called friction. Contact, forces arise also when solids are in contact with, fluids. For example, for a solid immersed in a, fluid, there is an upward bouyant force equal to, the weight of the fluid displaced. The viscous, force, air resistance, etc are also examples of, contact forces (Fig. 5.9)., Two other common forces are tension in a, string and the force due to spring. When a spring, is compressed or extended by an external force,, a restoring force is generated. This force is, usually proportional to the compression or, elongation (for small displacements). The spring, force F is written as F = – k x where x is the, displacement and k is the force constant. The, negative sign denotes that the force is opposite, to the displacement from the unstretched state., For an inextensible string, the force constant is, very high. The restoring force in a string is called, tension. It is customary to use a constant tension, T throughout the string. This assumption is true, for a string of negligible mass., In Chapter 1, we learnt that there are four, fundamental forces in nature. Of these, the weak, and strong forces appear in domains that do not, concern us here. Only the gravitational and, electrical forces are relevant in the context of, mechanics. The different contact forces of, mechanics mentioned above fundamentally arise, from electrical forces. This may seem surprising, , Fig. 5.9 Some examples of contact forces in mechanics., , *, , We are not considering, for simplicity, charged and magnetic bodies. For these, besides gravity, there are, electrical and magnetic non-contact forces., , 2018-19

Page 101 :
LAWS OF MOTION, , since we are talking of uncharged and nonmagnetic bodies in mechanics. At the microscopic, level, all bodies are made of charged constituents, (nuclei and electrons) and the various contact, forces arising due to elasticity of bodies, molecular, collisions and impacts, etc. can ultimately be, traced to the electrical forces between the charged, constituents of different bodies. The detailed, microscopic origin of these forces is, however,, complex and not useful for handling problems in, mechanics at the macroscopic scale. This is why, they are treated as different types of forces with, their characteristic properties determined, empirically., , 101, , exist by itself. When there is no applied force,, there is no static friction. It comes into play the, moment there is an applied force. As the applied, force F increases, fs also increases, remaining, equal and opposite to the applied force (up to a, certain limit), keeping the body at rest. Hence, it, is called static friction. Static friction opposes, impending motion. The term impending motion, means motion that would take place (but does, not actually take place) under the applied force,, if friction were absent., We know from experience that as the applied, force exceeds a certain limit, the body begins to, move. It is found experimentally that the limiting, , ( ), , value of static friction f s, 5.9.1 Friction, Let us return to the example of a body of mass m, at rest on a horizontal table. The force of gravity, (mg) is cancelled by the normal reaction force, (N) of the table. Now suppose a force F is applied, horizontally to the body. We know from, experience that a small applied force may not, be enough to move the body. But if the applied, force F were the only external force on the body,, it must move with acceleration F/m, however, small. Clearly, the body remains at rest because, some other force comes into play in the, horizontal direction and opposes the applied, force F, resulting in zero net force on the body., This force fs parallel to the surface of the body in, contact with the table is known as frictional, force, or simply friction (Fig. 5.10(a)). The, subscript stands for static friction to distinguish, it from kinetic friction fk that we consider later, (Fig. 5.10(b)). Note that static friction does not, , is independent of, , the area of contact and varies with the normal, force(N) approximately as :, , (f ), , = µs N, , (5.13), where µ s is a constant of proportionality, depending only on the nature of the surfaces in, contact. The constant µs is called the coefficient, of static friction. The law of static friction may, thus be written as, fs ≤ µs N, (5.14), s, , max, , ( ), , If the applied force F exceeds f s max the body, begins to slide on the surface. It is found, experimentally that when relative motion has, started, the frictional force decreases from the, , ( ), , static maximum value f s max . Frictional force, that opposes relative motion between surfaces, in contact is called kinetic or sliding friction and, is denoted by fk . Kinetic friction, like static, friction, is found to be independent of the area, of contact. Further, it is nearly independent of, the velocity. It satisfies a law similar to that for, static friction:, f k = µk N, , Fig. 5.10 Static and sliding friction: (a) Impending, motion of the body is opposed by static, friction. When external force exceeds the, maximum limit of static friction, the body, begins to move. (b) Once the body is in, motion, it is subject to sliding or kinetic friction, which opposes relative motion between the, two surfaces in contact. Kinetic friction is, usually less than the maximum value of static, friction., , max, , (5.15), , where µk′ the coefficient of kinetic friction,, depends only on the surfaces in contact. As, mentioned above, experiments show that µk is, less than µs . When relative motion has begun,, the acceleration of the body according to the, second law is ( F – fk )/m. For a body moving with, constant velocity, F = fk. If the applied force on, the body is removed, its acceleration is – fk /m, and it eventually comes to a stop., The laws of friction given above do not have, the status of fundamental laws like those for, gravitational, electric and magnetic forces. They, are empirical relations that are only, , 2018-19

Page 102 :
102, , PHYSICS, , Example 5.7 Determine the maximum, acceleration of the train in which a box, lying on its floor will remain stationary,, given that the co-efficient of static friction, between the box and the train’s floor is, 0.15., , t, , Answer Since the acceleration of the box is due, to the static friction,, ma = fs ≤ µs N = µs m g, i.e. a ≤ µs g, ∴ amax = µs g = 0.15 x 10 m s–2, = 1.5 m s–2, t, , Answer The forces acting on a block of mass m, at rest on an inclined plane are (i) the weight, mg acting vertically downwards (ii) the normal, force N of the plane on the block, and (iii) the, static frictional force fs opposing the impending, motion. In equilibrium, the resultant of these, forces must be zero. Resolving the weight mg, along the two directions shown, we have, m g sin θ = fs , m g cos θ = N, As θ increases, the self-adjusting frictional force, fs increases until at θ = θmax, fs achieves its, , ( ), , maximum value, f s, , max, , = µs N., , Therefore,, tan θmax = µs or θmax = tan–1 µs, When θ becomes just a little more than θmax ,, there is a small net force on the block and it, begins to slide. Note that θmax depends only on, µs and is independent of the mass of the block., For, , t, , approximately true. Yet they are very useful in, practical calculations in mechanics., Thus, when two bodies are in contact, each, experiences a contact force by the other. Friction,, by definition, is the component of the contact force, parallel to the surfaces in contact, which opposes, impending or actual relative motion between the, two surfaces. Note that it is not motion, but, relative motion that the frictional force opposes., Consider a box lying in the compartment of a train, that is accelerating. If the box is stationary, relative to the train, it is in fact accelerating along, with the train. What forces cause the acceleration, of the box? Clearly, the only conceivable force in, the horizontal direction is the force of friction. If, there were no friction, the floor of the train would, slip by and the box would remain at its initial, position due to inertia (and hit the back side of, the train). This impending relative motion is, opposed by the static friction fs. Static friction, provides the same acceleration to the box as that, of the train, keeping it stationary relative to the, train., , θmax = 15°,, µs, = tan 15°, = 0.27, , t, , Example 5.9 What is the acceleration of, the block and trolley system shown in a, Fig. 5.12(a), if the coefficient of kinetic friction, between the trolley and the surface is 0.04?, What is the tension in the string? (Take g =, 10 m s-2). Neglect the mass of the string., , Example 5.8 See Fig. 5.11. A mass of 4 kg, rests on a horizontal plane. The plane is, gradually inclined until at an angle θ = 15°, with the horizontal, the mass just begins to, slide. What is the coefficient of static friction, between the block and the surface ?, (a), , (b), Fig. 5.11, , (c), Fig. 5.12, , 2018-19, , t

Page 103 :
LAWS OF MOTION, , 103, , Answer As the string is inextensible, and the, pully is smooth, the 3 kg block and the 20 kg, trolley both have same magnitude of, acceleration. Applying second law to motion of, the block (Fig. 5.12(b)),, 30 – T = 3a, Apply the second law to motion of the trolley (Fig., 5.12(c)),, T – fk = 20 a., Now, fk = µk N,, Here, µk = 0.04,, N = 20 x 10, = 200 N., Thus the equation for the motion of the trolley is, T – 0.04 x 200 = 20 a Or T – 8 = 20a., These equations give a =, , and T = 27.1 N., , 22, 23, , m s –2 = 0.96 m s-2, t, , Rolling friction, A body like a ring or a sphere rolling without, slipping over a horizontal plane will suffer no, friction, in principle. At every instant, there is, just one point of contact between the body and, the plane and this point has no motion relative, to the plane. In this ideal situation, kinetic or, static friction is zero and the body should, continue to roll with constant velocity. We know,, in practice, this will not happen and some, resistance to motion (rolling friction) does occur,, i.e. to keep the body rolling, some applied force, is needed. For the same weight, rolling friction, is much smaller (even by 2 or 3 orders of, magnitude) than static or sliding friction. This, , is the reason why discovery of the wheel has, been a major milestone in human history., Rolling friction again has a complex origin,, though somewhat different from that of static, and sliding friction. During rolling, the surfaces, in contact get momentarily deformed a little, and, this results in a finite area (not a point) of the, body being in contact with the surface. The net, effect is that the component of the contact force, parallel to the surface opposes motion., We often regard friction as something, undesirable. In many situations, like in a, machine with different moving parts, friction, does have a negative role. It opposes relative, motion and thereby dissipates power in the form, of heat, etc. Lubricants are a way of reducing, kinetic friction in a machine. Another way is to, use ball bearings between two moving parts of a, machine [Fig. 5.13(a)]. Since the rolling friction, between ball bearings and the surfaces in, contact is very small, power dissipation is, reduced. A thin cushion of air maintained, between solid surfaces in relative motion is, another effective way of reducing friction (Fig., 5.13(a))., In many practical situations, however, friction, is critically needed. Kinetic friction that, dissipates power is nevertheless important for, quickly stopping relative motion. It is made use, of by brakes in machines and automobiles., Similarly, static friction is important in daily, life. We are able to walk because of friction. It, is impossible for a car to move on a very slippery, road. On an ordinary road, the friction between, the tyres and the road provides the necessary, external force to accelerate the car., , Fig. 5.13 Some ways of reducing friction. (a) Ball bearings placed between moving parts of a machine., (b) Compressed cushion of air between surfaces in relative motion., , 2018-19

Page 104 :
104, , PHYSICS, , 5.10 CIRCULAR MOTION, We have seen in Chapter 4 that acceleration of, a body moving in a circle of radius R with uniform, speed v is v2/R directed towards the centre., According to the second law, the force f providing, c, this acceleration is :, , fc =, , mv 2, R, , is the static friction that provides the centripetal, acceleration. Static friction opposes the, impending motion of the car moving away from, the circle. Using equation (5.14) & (5.16) we get, the result, f =, , mv 2, ≤ µs N, R, , (5.16), v2 ≤, , where m is the mass of the body. This force, directed forwards the centre is called the, centripetal force. For a stone rotated in a circle, by a string, the centripetal force is provided by, the tension in the string. The centripetal force, for motion of a planet around the sun is the, , µ s RN, , = µ s Rg, [∵ N = mg], m, which is independent of the mass of the car., This shows that for a given value of µs and R,, there is a maximum speed of circular motion of, the car possible, namely, , v max = µs Rg, , (a), , (5.18), , (b), , Fig. 5.14 Circular motion of a car on (a) a level road, (b) a banked road., , gravitational force on the planet due to the sun., For a car taking a circular turn on a horizontal, road, the centripetal force is the force of friction., The circular motion of a car on a flat and, banked road give interesting application of the, laws of motion., Motion of a car on a level road, Three forces act on the car (Fig. 5.14(a):, (i), The weight of the car, mg, (ii), Normal reaction, N, (iii), Frictional force, f, As there is no acceleration in the vertical, direction, N – mg = 0, N = mg, (5.17), The centripetal force required for circular motion, is along the surface of the road, and is provided, by the component of the contact force between, road and the car tyres along the surface. This, by definition is the frictional force. Note that it, , 2018-19, , Motion of a car on a banked road, We can reduce the contribution of friction to the, circular motion of the car if the road is banked, (Fig. 5.14(b)). Since there is no acceleration along, the vertical direction, the net force along this, direction must be zero. Hence,, N cos θ = mg + f sin θ, , (5.19a), , The centripetal force is provided by the horizontal, components of N and f., N sin θ + f cos θ =, , mv 2, R, , (5.19b), , But f ≤ µs N, Thus to obtain v, we put, max, f = µs N ., Then Eqs. (5.19a) and (5.19b) become, N cos θ = mg + µs N sin θ, , (5.20a)

Page 105 :
LAWS OF MOTION, , 105, , N sin θ + µs N cos θ = mv2/R, From Eq. (5.20a), we obtain, , N=, , (5.20b), , mg, cosθ – µs sinθ, , Substituting value of N in Eq. (5.20b), we get, 2, mg (sinθ + µs cosθ ) mv max, =, cosθ – µs sinθ, R, 1, , or v max, , , µ + tanθ  2, =  Rg s, , 1 – µs tanθ , , , (5.21), , Comparing this with Eq. (5.18) we see that, maximum possible speed of a car on a banked, road is greater than that on a flat road., For µs = 0 in Eq. (5.21 ),, vo = ( R g tan θ ) ½, , (5.22), , At this speed, frictional force is not needed at all, to provide the necessary centripetal force., Driving at this speed on a banked road will cause, little wear and tear of the tyres. The same, equation also tells you that for v < vo, frictional, force will be up the slope and that a car can be, parked only if tan θ ≤ µs., Example 5.10 A cyclist speeding at, 18 km/h on a level road takes a sharp, circular turn of radius 3 m without reducing, the speed. The co-efficient of static friction, between the tyres and the road is 0.1. Will, the cyclist slip while taking the turn?, , t, , Answer On an unbanked road, frictional force, alone can provide the centripetal force needed, to keep the cyclist moving on a circular turn, without slipping. If the speed is too large, or if, the turn is too sharp (i.e. of too small a radius), or both, the frictional force is not sufficient to, provide the necessary centripetal force, and the, cyclist slips. The condition for the cyclist not to, slip is given by Eq. (5.18) :, v2 ≤ µs R g, Now, R = 3 m, g = 9.8 m s-2, µs = 0.1. That is,, µs R g = 2.94 m2 s-2. v = 18 km/h = 5 m s-1; i.e.,, v2 = 25 m2 s-2. The condition is not obeyed., The cyclist will slip while taking the circular, turn., t, , t Example 5.11 A circular racetrack of, radius 300 m is banked at an angle of 15°., If the coefficient of friction between the, wheels of a race-car and the road is 0.2,, what is the (a) optimum speed of the racecar to avoid wear and tear on its tyres, and, (b) maximum permissible speed to avoid, slipping ?, , Answer On a banked road, the horizontal, component of the normal force and the frictional, force contribute to provide centripetal force to, keep the car moving on a circular turn without, slipping. At the optimum speed, the normal, reaction’s component is enough to provide the, needed centripetal force, and the frictional force, is not needed. The optimum speed vo is given by, Eq. (5.22):, vO = (R g tan θ)1/2, Here R = 300 m, θ = 15°, g = 9.8 m s-2; we, have, vO = 28.1 m s-1., The maximum permissible speed vmax is given by, Eq. (5.21):, t, , 5.11 SOLVING PROBLEMS IN MECHANICS, The three laws of motion that you have learnt in, this chapter are the foundation of mechanics., You should now be able to handle a large variety, of problems in mechanics. A typical problem in, mechanics usually does not merely involve a, single body under the action of given forces., More often, we will need to consider an assembly, of different bodies exerting forces on each other., Besides, each body in the assembly experiences, the force of gravity. When trying to solve a, problem of this type, it is useful to remember, the fact that we can choose any part of the, assembly and apply the laws of motion to that, part provided we include all forces on the chosen, part due to the remaining parts of the assembly., We may call the chosen part of the assembly as, the system and the remaining part of the, assembly (plus any other agencies of forces) as, the environment. We have followed the same, , 2018-19

Page 106 :
106, , PHYSICS, , method in solved examples. To handle a typical, problem in mechanics systematically, one, should use the following steps :, (i) Draw a diagram showing schematically the, various parts of the assembly of bodies, the, links, supports, etc., (ii) Choose a convenient part of the assembly, as one system., (iii) Draw a separate diagram which shows this, system and all the forces on the system by, the remaining part of the assembly. Include, also the forces on the system by other, agencies. Do not include the forces on the, environment by the system. A diagram of, this type is known as ‘a free-body diagram’., (Note this does not imply that the system, under consideration is without a net force)., (iv) In a free-body diagram, include information, about forces (their magnitudes and, directions) that are either given or you are, sure of (e.g., the direction of tension in a, string along its length). The rest should be, treated as unknowns to be determined using, laws of motion., (v) If necessary, follow the same procedure for, another choice of the system. In doing so,, employ Newton’s third law. That is, if in the, free-body diagram of A, the force on A due to, B is shown as F, then in the free-body, diagram of B, the force on B due to A should, be shown as –F., , the net force on the block must be zero i.e.,, R = 20 N. Using third law the action of the, block (i.e. the force exerted on the floor by, the block) is equal to 20 N and directed, vertically downwards., (b) The system (block + cylinder) accelerates, downwards with 0.1 m s-2. The free-body, diagram of the system shows two forces on, the system : the force of gravity due to the, earth (270 N); and the normal force R ′ by the, floor. Note, the free-body diagram of the, system does not show the internal forces, between the block and the cylinder. Applying, the second law to the system,, 270 – R′ = 27 × 0.1N, ie. R′ = 267.3 N, , The following example illustrates the above, procedure :, t Example 5.12 See Fig. 5.15. A wooden, block of mass 2 kg rests on a soft horizontal, floor. When an iron cylinder of mass 25 kg, is placed on top of the block, the floor yields, steadily and the block and the cylinder, together go down with an acceleration of, 0.1 m s–2. What is the action of the block, on the floor (a) before and (b) after the floor, yields ? Take g = 10 m s–2. Identify the, action-reaction pairs in the problem., , Answer, (a) The block is at rest on the floor. Its free-body, diagram shows two forces on the block, the, force of gravitational attraction by the earth, equal to 2 × 10 = 20 N; and the normal force, R of the floor on the block. By the First Law,, , 2018-19, , Fig. 5.15, , By the third law, the action of the system on, the floor is equal to 267.3 N vertically downward., Action-reaction pairs, For (a): (i) the force of gravity (20 N) on the block, by the earth (say, action); the force of, gravity on the earth by the block, (reaction) equal to 20 N directed, upwards (not shown in the figure)., (ii) the force on the floor by the block, (action); the force on the block by the, floor (reaction)., For (b): (i) the force of gravity (270 N) on the, system by the earth (say, action); the, force of gravity on the earth by the, system (reaction), equal to 270 N,

Page 107 :
LAWS OF MOTION, , 107, , directed upwards (not shown in the, figure)., (ii) the force on the floor by the system, (action); the force on the system by the, floor (reaction). In addition, for (b), the, force on the block by the cylinder and, the force on the cylinder by the block, also constitute an action-reaction pair., The important thing to remember is that an, action-reaction pair consists of mutual forces, which are always equal and opposite between, two bodies. Two forces on the same body which, happen to be equal and opposite can never, constitute an action-reaction pair. The force of, , gravity on the mass in (a) or (b) and the normal, force on the mass by the floor are not actionreaction pairs. These forces happen to be equal, and opposite for (a) since the mass is at rest., They are not so for case (b), as seen already., The weight of the system is 270 N, while the, normal force R′ is 267.3 N., t, The practice of drawing free-body diagrams is, of great help in solving problems in mechanics., It allows you to clearly define your system and, consider all forces on the system due to objects, that are not part of the system itself. A number, of exercises in this and subsequent chapters will, help you cultivate this practice., , SUMMARY, 1., 2., , 3., 4., , Aristotle’s view that a force is necessary to keep a body in uniform motion is wrong. A, force is necessary in practice to counter the opposing force of friction., Galileo extrapolated simple observations on motion of bodies on inclined planes, and, arrived at the law of inertia. Newton’s first law of motion is the same law rephrased, thus: “Everybody continues to be in its state of rest or of uniform motion in a straight line,, unless compelled by some external force to act otherwise”. In simple terms, the First Law, is “If external force on a body is zero, its acceleration is zero”., Momentum (p ) of a body is the product of its mass (m) and velocity (v) :, p = mv, Newton’s second law of motion :, The rate of change of momentum of a body is proportional to the applied force and takes, place in the direction in which the force acts. Thus, , F=k, , dp, , =kma, dt, where F is the net external force on the body and a its acceleration. We set the constant, of proportionality k = 1 in SI units. Then, F=, , dp, , = ma, dt, The SI unit of force is newton : 1 N = 1 kg m s-2., (a) The second law is consistent with the First Law (F = 0 implies a = 0), (b) It is a vector equation, (c) It is applicable to a particle, and also to a body or a system of particles, provided F, is the total external force on the system and a is the acceleration of the system as, a whole., (d) F at a point at a certain instant determines a at the same point at that instant., That is the Second Law is a local law; a at an instant does not depend on the, history of motion., 5. Impulse is the product of force and time which equals change in momentum., The notion of impulse is useful when a large force acts for a short time to produce a, measurable change in momentum. Since the time of action of the force is very short,, one can assume that there is no appreciable change in the position of the body during, the action of the impulsive force., 6. Newton’s third law of motion:, To every action, there is always an equal and opposite reaction, , 2018-19

Page 108 :
108, , PHYSICS, , 7., , 8., , In simple terms, the law can be stated thus :, Forces in nature always occur between pairs of bodies. Force on a body A by body, B is equal and opposite to the force on the body B by A., Action and reaction forces are simultaneous forces. There is no cause-effect, relation between action and reaction. Any of the two mutual forces can be, called action and the other reaction. Action and reaction act on different, bodies and so they cannot be cancelled out. The internal action and reaction, forces between different parts of a body do, however, sum to zero., Law of Conservation of Momentum, The total momentum of an isolated system of particles is conserved. The law, follows from the second and third law of motion., Friction, Frictional force opposes (impending or actual) relative motion between two, surfaces in contact. It is the component of the contact force along the common, tangent to the surface in contact. Static friction fs opposes impending relative, motion; kinetic friction fk opposes actual relative motion. They are independent, of the area of contact and satisfy the following approximate laws :, , ( ), , f s ≤ fs, , max, , = µs R, , =µ R, k, k, µs (co-efficient of static friction) and µk (co-efficient of kinetic friction) are, constants characteristic of the pair of surfaces in contact. It is found, experimentally that µk is less than µs ., f, , POINTS TO PONDER, 1., , 2., , 3., , 4., , Force is not always in the direction of motion. Depending on the situation, F, may be along v, opposite to v, normal to v or may make some other angle with, v. In every case, it is parallel to acceleration., If v = 0 at an instant, i.e. if a body is momentarily at rest, it does not mean that, force or acceleration are necessarily zero at that instant. For example, when a, ball thrown upward reaches its maximum height, v = 0 but the force continues, to be its weight mg and the acceleration is not zero but g., Force on a body at a given time is determined by the situation at the location of, the body at that time. Force is not ‘carried’ by the body from its earlier history of, motion. The moment after a stone is released out of an accelerated train, there is, no horizontal force (or acceleration) on the stone, if the effects of the surrounding, air are neglected. The stone then has only the vertical force of gravity., In the second law of motion F = m a, F stands for the net force due to all, material agencies external to the body. a is the effect of the force. ma should, not be regarded as yet another force, besides F., , 2018-19

Page 109 :
LAWS OF MOTION, , 109, , 5., , The centripetal force should not be regarded as yet another kind of force. It is, simply a name given to the force that provides inward radial acceleration to a, body in circular motion. We should always look for some material force like, tension, gravitational force, electrical force, friction, etc as the centripetal force, in any circular motion., 6. Static friction is a self-adjusting force up to its limit µs N (fs ≤ µs N). Do not put, fs= µs N without being sure that the maximum value of static friction is coming, into play., 7. The familiar equation mg = R for a body on a table is true only if the body is in, equilibrium. The two forces mg and R can be different (e.g. a body in an, accelerated lift). The equality of mg and R has no connection with the third, law., 8. The terms ‘action’ and ‘reaction’ in the third Law of Motion simply stand for, simultaneous mutual forces between a pair of bodies. Unlike their meaning in, ordinary language, action does not precede or cause reaction. Action and reaction, act on different bodies., 9. The different terms like ‘friction’, ‘normal reaction’ ‘tension’, ‘air resistance’,, ‘viscous drag’, ‘thrust’, ‘buoyancy’, ‘weight’, ‘centripetal force’ all stand for ‘force’, in different contexts. For clarity, every force and its equivalent terms, encountered in mechanics should be reduced to the phrase ‘force on A by B’., 10. For applying the second law of motion, there is no conceptual distinction between, inanimate and animate objects. An animate object such as a human also, requires an external force to accelerate. For example, without the external, force of friction, we cannot walk on the ground., 11. The objective concept of force in physics should not be confused with the, subjective concept of the ‘feeling of force’. On a merry-go-around, all parts of, our body are subject to an inward force, but we have a feeling of being pushed, outward – the direction of impending motion., EXERCISES, 5.1, , 5.2, , (For simplicity in numerical calculations, take g = 10 m s-2), Give the magnitude and direction of the net force acting on, (a) a drop of rain falling down with a constant speed,, (b) a cork of mass 10 g floating on water,, (c) a kite skillfully held stationary in the sky,, (d) a car moving with a constant velocity of 30 km/h on a rough road,, (e) a high-speed electron in space far from all material objects, and free of, electric and magnetic fields., A pebble of mass 0.05 kg is thrown vertically upwards. Give the direction, and magnitude of the net force on the pebble,, (a) during its upward motion,, (b) during its downward motion,, (c) at the highest point where it is momentarily at rest. Do your answers, change if the pebble was thrown at an angle of 45° with the horizontal, direction?, Ignore air resistance., , 5.3, , Give the magnitude and direction of the net force acting on a stone of mass, 0.1 kg,, (a) just after it is dropped from the window of a stationary train,, (b) just after it is dropped from the window of a train running at a constant, velocity of 36 km/h,, (c ) just after it is dropped from the window of a train accelerating with 1 m s-2,, (d) lying on the floor of a train which is accelerating with 1 m s-2, the stone, being at rest relative to the train., Neglect air resistance throughout., , 2018-19

Page 110 :
110, , PHYSICS, , 5.4, , One end of a string of length l is connected to a particle of mass m and the, other to a small peg on a smooth horizontal table. If the particle moves in a, circle with speed v the net force on the particle (directed towards the centre), is :, , mv2, mv2, , (iii) T +, , (iv) 0, l, l, T is the tension in the string. [Choose the correct alternative]., A constant retarding force of 50 N is applied to a body of mass 20 kg moving, initially with a speed of 15 m s-1. How long does the body take to stop ?, A constant force acting on a body of mass 3.0 kg changes its speed from 2.0 m s-1, to 3.5 m s-1 in 25 s. The direction of the motion of the body remains, unchanged. What is the magnitude and direction of the force ?, A body of mass 5 kg is acted upon by two perpendicular forces 8 N and 6 N., Give the magnitude and direction of the acceleration of the body., The driver of a three-wheeler moving with a speed of 36 km/h sees a child, standing in the middle of the road and brings his vehicle to rest in 4.0 s just, in time to save the child. What is the average retarding force on the vehicle ?, The mass of the three-wheeler is 400 kg and the mass of the driver is 65 kg., A rocket with a lift-off mass 20,000 kg is blasted upwards with an initial, acceleration of 5.0 m s-2. Calculate the initial thrust (force) of the blast., A body of mass 0.40 kg moving initially with a constant speed of 10 m s-1 to, the north is subject to a constant force of 8.0 N directed towards the south, for 30 s. Take the instant the force is applied to be t = 0, the position of the, body at that time to be x = 0, and predict its position at t = –5 s, 25 s, 100 s., A truck starts from rest and accelerates uniformly at 2.0 m s-2. At t = 10 s, a, stone is dropped by a person standing on the top of the truck (6 m high from, the ground). What are the (a) velocity, and (b) acceleration of the stone at t =, 11s ? (Neglect air resistance.), A bob of mass 0.1 kg hung from the ceiling of a room by a string 2 m long is, set into oscillation. The speed of the bob at its mean position is 1 m s-1., What is the trajectory of the bob if the string is cut when the bob is (a) at one, of its extreme positions, (b) at its mean position., A man of mass 70 kg stands on a weighing scale in a lift which is moving, (a) upwards with a uniform speed of 10 m s-1,, (b) downwards with a uniform acceleration of 5 m s-2,, (c) upwards with a uniform acceleration of 5 m s-2., What would be the readings on the scale in each case?, (d) What would be the reading if the lift mechanism failed and it hurtled, down freely under gravity ?, Figure 5.16 shows the position-time graph of a particle of mass 4 kg. What is, the (a) force on the particle for t < 0, t > 4 s, 0 < t < 4 s? (b) impulse at t = 0 and, t = 4 s ? (Consider one-dimensional motion only)., , (i) T, (ii) T −, , 5.5, 5.6, , 5.7, 5.8, , 5.9, 5.10, , 5.11, , 5.12, , 5.13, , 5.14, , Fig. 5.16, 5.15 Two bodies of masses 10 kg and 20 kg respectively kept on a smooth, horizontal, surface are tied to the ends of a light string. A horizontal force F = 600 N is, applied to (i) A, (ii) B along the direction of string. What is the tension in the, string in each case?, , 2018-19

Page 111 :
LAWS OF MOTION, , 111, , 5.16 Two masses 8 kg and 12 kg are connected at the two ends of a light inextensible, string that goes over a frictionless pulley. Find the acceleration of the masses, and, the tension in the string when the masses are released., 5.17 A nucleus is at rest in the laboratory frame of reference. Show that if it disintegrates, into two smaller nuclei the products must move in opposite directions., 5.18 Two billiard balls each of mass 0.05 kg moving in opposite directions with speed 6 m s-1, collide and rebound with the same speed. What is the impulse imparted to each ball due, to the other ?, 5.19 A shell of mass 0.020 kg is fired by a gun of mass 100 kg. If the muzzle speed of the, shell is 80 m s-1, what is the recoil speed of the gun ?, 5.20 A batsman deflects a ball by an angle of 45° without changing its initial speed which is, equal to 54 km/h. What is the impulse imparted to the ball ? (Mass of the ball is 0.15 kg.), 5.21 A stone of mass 0.25 kg tied to the end of a string is whirled round in a circle of radius, 1.5 m with a speed of 40 rev./min in a horizontal plane. What is the tension in the, string ? What is the maximum speed with which the stone can be whirled around if, the string can withstand a maximum tension of 200 N ?, 5.22 If, in Exercise 5.21, the speed of the stone is increased beyond the maximum permissible, value, and the string breaks suddenly, which of the following correctly describes the, trajectory of the stone after the string breaks :, (a) the stone moves radially outwards,, (b) the stone flies off tangentially from the instant the string breaks,, (c) the stone flies off at an angle with the tangent whose magnitude depends on the, speed of the particle ?, 5.23 Explain why, (a) a horse cannot pull a cart and run in empty space,, (b) passengers are thrown forward from their seats when a speeding bus stops, suddenly,, (c) it is easier to pull a lawn mower than to push it,, (d) a cricketer moves his hands backwards while holding a catch., Additional Exercises, 5.24 Figure 5.17 shows the position-time graph of a body of mass 0.04 kg. Suggest a, suitable physical context for this motion. What is the time between two consecutive, impulses received by the body ? What is the magnitude of each impulse ?, , Fig. 5.17, 5.25 Figure 5.18 shows a man standing stationary with respect to a horizontal conveyor, belt that is accelerating with 1 m s-2. What is the net force on the man? If the, coefficient of static friction between the man’s shoes and the belt is 0.2, up to what, acceleration of the belt can the man continue to be stationary relative to the belt ?, (Mass of the man = 65 kg.), , Fig. 5.18, , 2018-19

Page 112 :
112, , PHYSICS, , 5.26 A stone of mass m tied to the end of a string revolves in a vertical circle of radius R., The net forces at the lowest and highest points of the circle directed vertically, downwards are : [Choose the correct alternative], Lowest Point, , 5.27, , 5.28, , 5.29, , 5.30, 5.31, , 5.32, , (a), , mg – T1, , (b), , mg + T1, , Highest Point, mg + T2, mg – T2, 2, 1, , (c), , mg + T1 – (m v ) / R, , mg – T2 + (m v 21 ) / R, , (d), , mg – T1 – (m v 21 ) / R, , mg + T2 + (m v 21 ) / R, , T1 and v1 denote the tension and speed at the lowest point. T2 and v2 denote, corresponding values at the highest point., A helicopter of mass 1000 kg rises with a vertical acceleration of 15 m s-2. The crew, and the passengers weigh 300 kg. Give the magnitude and direction of the, (a) force on the floor by the crew and passengers,, (b) action of the rotor of the helicopter on the surrounding air,, (c) force on the helicopter due to the surrounding air., A stream of water flowing horizontally with a speed of 15 m s-1 gushes out of a tube of, cross-sectional area 10-2 m2, and hits a vertical wall nearby. What is the force exerted, on the wall by the impact of water, assuming it does not rebound ?, Ten one-rupee coins are put on top of each other on a table. Each coin has a mass m., Give the magnitude and direction of, (a) the force on the 7th coin (counted from the bottom) due to all the coins on its top,, (b) the force on the 7th coin by the eighth coin,, (c) the reaction of the 6th coin on the 7th coin., An aircraft executes a horizontal loop at a speed of 720 km/h with its wings banked, at 15°. What is the radius of the loop ?, A train runs along an unbanked circular track of radius 30 m at a speed of 54 km/h., The mass of the train is 106 kg. What provides the centripetal force required for this, purpose — The engine or the rails ? What is the angle of banking required to prevent, wearing out of the rail ?, A block of mass 25 kg is raised by a 50 kg man in two different ways as shown in, Fig. 5.19. What is the action on the floor by the man in the two cases ? If the floor, yields to a normal force of 700 N, which mode should the man adopt to lift the block, without the floor yielding ?, , Fig. 5.19, , 2018-19

Page 113 :
LAWS OF MOTION, , 113, , 5.33 A monkey of mass 40 kg climbs on a rope (Fig. 5.20) which, can stand a maximum tension of 600 N. In which of the, following cases will the rope break: the monkey, (a) climbs up with an acceleration of 6 m s-2, (b) climbs down with an acceleration of 4 m s-2, (c) climbs up with a uniform speed of 5 m s-1, (d) falls down the rope nearly freely under gravity?, (Ignore the mass of the rope)., 5.34 Two bodies A and B of masses 5 kg and 10 kg in contact with, each other rest on a table against a rigid wall (Fig. 5.21). The, coefficient of friction between the bodies and the table is, 0.15. A force of 200 N is applied horizontally to A. What are, (a) the reaction of the partition (b) the action-reaction forces, between A and B ? What happens when the wall is removed?, Does the answer to (b) change, when the bodies are in motion?, Ignore the difference between µs and µk., , Fig. 5.20, , Fig. 5.21, , 5.35 A block of mass 15 kg is placed on a long trolley. The coefficient of static friction, between the block and the trolley is 0.18. The trolley accelerates from rest with, 0.5 m s-2 for 20 s and then moves with uniform velocity. Discuss the motion of the, block as viewed by (a) a stationary observer on the ground, (b) an observer moving with, the trolley., 5.36 The rear side of a truck is open and a box of 40 kg, mass is placed 5 m away from the open end as shown, in Fig. 5.22. The coefficient of friction between the, box and the surface below it is 0.15. On a straight, road, the truck starts from rest and accelerates with, 2 m s-2. At what distance from the starting point, does the box fall off the truck? (Ignore the size of, the box)., 5.37 A disc revolves with a speed of 33, , 1, 3, , Fig. 5.22, , rev/min, and has a radius of 15 cm. Two coins are, , placed at 4 cm and 14 cm away from the centre of the record. If the co-efficient of friction, between the coins and the record is 0.15, which of the coins will revolve with the record ?, 5.38 You may have seen in a circus a motorcyclist driving in vertical loops inside a ‘deathwell’ (a hollow spherical chamber with holes, so the spectators can watch from outside)., Explain clearly why the motorcyclist does not drop down when he is at the uppermost, point, with no support from below. What is the minimum speed required at the, uppermost position to perform a vertical loop if the radius of the chamber is 25 m ?, 5.39 A 70 kg man stands in contact against the inner wall of a hollow cylindrical drum of, radius 3 m rotating about its vertical axis with 200 rev/min. The coefficient of, friction between the wall and his clothing is 0.15. What is the minimum rotational, speed of the cylinder to enable the man to remain stuck to the wall (without falling), when the floor is suddenly removed ?, 5.40 A thin circular loop of radius R rotates about its vertical diameter with an angular, frequency ω. Show that a small bead on the wire loop remains at its lowermost point, for ω ≤, , g / R . What is the angle made by the radius vector joining the centre to, , the bead with the vertical downward direction for ω =, , 2018-19, , 2g / R ? Neglect friction.

Page 114 :
CHAPTER SIX, , WORK, ENERGY, , AND, , POWER, , 6.1 INTRODUCTION, , 6.1 Introduction, 6.2 Notions of work and kinetic, energy : The work-energy, theorem, 6.3 Work, 6.4 Kinetic energy, 6.5 Work done by a variable, force, 6.6 The work-energy theorem for, a variable force, 6.7 The concept of potential, energy, 6.8 The conservation of, mechanical energy, 6.9 The potential energy of a, spring, 6.10 Various forms of energy : the, law of conservation of energy, 6.11 Power, 6.12 Collisions, Summary, Points to ponder, Exercises, Additional exercises, Appendix 6.1, , The terms ‘work’, ‘energy’ and ‘power’ are frequently used, in everyday language. A farmer ploughing the field, a, construction worker carrying bricks, a student studying for, a competitive examination, an artist painting a beautiful, landscape, all are said to be working. In physics, however,, the word ‘Work’ covers a definite and precise meaning., Somebody who has the capacity to work for 14-16 hours a, day is said to have a large stamina or energy. We admire a, long distance runner for her stamina or energy. Energy is, thus our capacity to do work. In Physics too, the term ‘energy’, is related to work in this sense, but as said above the term, ‘work’ itself is defined much more precisely. The word ‘power’, is used in everyday life with different shades of meaning. In, karate or boxing we talk of ‘powerful’ punches. These are, delivered at a great speed. This shade of meaning is close to, the meaning of the word ‘power’ used in physics. We shall, find that there is at best a loose correlation between the, physical definitions and the physiological pictures these, terms generate in our minds. The aim of this chapter is to, develop an understanding of these three physical quantities., Before we proceed to this task, we need to develop a, mathematical prerequisite, namely the scalar product of two, vectors., 6.1.1 The Scalar Product, We have learnt about vectors and their use in Chapter 4., Physical quantities like displacement, velocity, acceleration,, force etc. are vectors. We have also learnt how vectors are, added or subtracted. We now need to know how vectors are, multiplied. There are two ways of multiplying vectors which, we shall come across : one way known as the scalar product, gives a scalar from two vectors and the other known as the, vector product produces a new vector from two vectors. We, shall look at the vector product in Chapter 7. Here we take, up the scalar product of two vectors. The scalar product or, dot product of any two vectors A and B, denoted as A.B (read, , 2018-19

Page 115 :
WORK, ENERGY AND POWER, , A dot B) is defined as, A.B = A B cos θ, , 115, , (6.1a), , where θ is the angle between the two vectors as, shown in Fig. 6.1(a). Since A, B and cos θ are, scalars, the dot product of A and B is a scalar, quantity. Each vector, A and B, has a direction, but their scalar product does not have a, direction., From Eq. (6.1a), we have, A .B = A (B cos θ ), = B (A cos θ ), Geometrically, B cos θ is the projection of B onto, A in Fig.6.1 (b) and A cos θ is the projection of A, onto B in Fig. 6.1 (c). So, A.B is the product of, the magnitude of A and the component of B along, A. Alternatively, it is the product of the, magnitude of B and the component of A along B., Equation (6.1a) shows that the scalar product, follows the commutative law :, A.B = B.A, Scalar product obeys the distributive, law:, A . (B + C) = A .B + A.C, Further,, , A = A x i
+ Ay
j + Az k
, , A. (λ B) = λ (A.B), , B = B x i
+ By
j + Bz k
, , their scalar product is, , (, , )(, , ˆ . B ˆi + B ˆj + B k, ˆ, A.B = A x ˆi + Ay ˆj + Az k, x, y, z, , = A x B x + Ay By + Az B z, (6.1b), From the definition of scalar product and, (Eq. 6.1b) we have :, (i), , A . A = A x A x + Ay Ay + A z A z, 2, ,
j ⋅
j = k
⋅ k
= 1,
j ⋅ k
= k
⋅ i
= 0, Given two vectors, , 2, , 2, , u Example 6.1 Find the angle between force, , ˆ ) unit and displacement, F = (3 ˆi + 4 ˆj - 5 k, ˆ ) unit. Also find the, d = (5 ˆi + 4 ˆj + 3 k, projection of F on d., Answer F.d = Fx d x + Fy d y + Fz d z, = 3 (5) + 4 (4) + (– 5) (3), = 16 unit, Hence F.d, , = F d cos θ = 16 unit, , Now F.F, , = F 2 = Fx2 + Fy2 + Fz2, = 9 + 16 + 25, = 50 unit, , and d.d, , = d 2 = d x2 + dy2 + dz2, = 25 + 16 + 9, = 50 unit, , For unit vectors
i,
j, k
we have, , i
⋅
i =, i
⋅
j =, , 2, , A = A x + Ay + A z, (6.1c), since A .A = |A ||A| cos 0 = A2., (ii), A .B = 0, if A and B are perpendicular., , Or,, , where λ is a real number., The proofs of the above equations are left to, you as an exercise., , ), , ∴ cos θ, , =, , 16, 50 50, , =, , 16, = 0.32 ,, 50, , θ = cos–1 0.32, , Fig. 6.1 (a) The scalar product of two vectors A and B is a scalar : A. B = A B cos θ. (b) B cos θ is the projection, of B onto A. (c) A cos θ is the projection of A onto B., , 2018-19

Page 116 :
116, , PHYSICS, , 6.2 NOTIONS OF WORK AND KINETIC, ENERGY: THE WORK-ENERGY THEOREM, The following relation for rectilinear motion under, constant acceleration a has been encountered, in Chapter 3,, v2 − u2 = 2 as, (6.2), where u and v are the initial and final speeds, and s the distance traversed. Multiplying both, sides by m/2, we have, , 1, 1, mv 2 − mu 2 = mas = Fs, 2, 2, , to be proportional to the speed of the drop, but is otherwise undetermined. Consider, a drop of mass 1.00 g falling from a height, 1.00 km. It hits the ground with a speed of, 50.0 m s-1. (a) What is the work done by the, gravitational force ? What is the work done, by the unknown resistive force?, Answer (a) The change in kinetic energy of the, drop is, , ∆K =, , (6.2a), , 1, × 10-3 × 50 × 50, 2, = 1.25 J, , where the last step follows from Newton’s Second, Law. We can generalise Eq. (6.2) to three, dimensions by employing vectors, v2 − u2 = 2 a.d, Here a and d are acceleration and displacement, vectors of the object respectively., Once again multiplying both sides by m/2 , we obtain, , 1, 1, mv 2 − mu 2 = m a.d = F.d, (6.2b), 2, 2, The above equation provides a motivation for, the definitions of work and kinetic energy. The, left side of the equation is the difference in the, quantity ‘half the mass times the square of the, speed’ from its initial value to its final value. We, call each of these quantities the ‘kinetic energy’,, denoted by K. The right side is a product of the, displacement and the component of the force, along the displacement. This quantity is called, ‘work’ and is denoted by W. Eq. (6.2b) is then, Kf − Ki = W, , (6.3), , where Ki and Kf are respectively the initial and, final kinetic energies of the object. Work refers, to the force and the displacement over which it, acts. Work is done by a force on the body over, a certain displacement., Equation (6.2) is also a special case of the, work-energy (WE) theorem : The change in, kinetic energy of a particle is equal to the, work done on it by the net force. We shall, generalise the above derivation to a varying force, in a later section., t Example 6.2 It is well known that a, raindrop falls under the influence of the, downward gravitational force and the, opposing resistive force. The latter is known, , 2018-19, , 1, m v2 − 0, 2, , =, , where we have assumed that the drop is initially, at rest., Assuming that g is a constant with a value, 10 m/s2, the work done by the gravitational force, is,, Wg = mgh, = 10-3 ×10 ×103, = 10.0 J, (b) From the work-energy theorem, ∆ K = W g + Wr, , where Wr is the work done by the resistive force, on the raindrop. Thus, Wr = ∆K − Wg, = 1.25 −10, = − 8.75 J, is negative., , t, , 6.3 WORK, As seen earlier, work is related to force and the, displacement over which it acts. Consider a, constant force F acting on an object of mass m., The object undergoes a displacement d in the, positive x-direction as shown in Fig. 6.2., , Fig. 6.2 An object undergoes a displacement d, under the influence of the force F.

Page 117 :
WORK, ENERGY AND POWER, , 117, , The work done by the force is defined to be, the product of component of the force in the, direction of the displacement and the, magnitude of this displacement. Thus, (6.4), , We see that if there is no displacement, there, is no work done even if the force is large. Thus,, when you push hard against a rigid brick wall,, the force you exert on the wall does no work. Yet, your muscles are alternatively contracting and, relaxing and internal energy is being used up, and you do get tired. Thus, the meaning of work, in physics is different from its usage in everyday, language., No work is done if :, (i) the displacement is zero as seen in the, example above. A weightlifter holding a 150, kg mass steadily on his shoulder for 30 s, does no work on the load during this time., (ii) the force is zero. A block moving on a smooth, horizontal table is not acted upon by a, horizontal force (since there is no friction), but, may undergo a large displacement., (iii) the force and displacement are mutually, perpendicular. This is so since, for θ = π/2 rad, (= 90o), cos (π/2) = 0. For the block moving on, a smooth horizontal table, the gravitational, force mg does no work since it acts at right, angles to the displacement. If we assume that, the moon’s orbits around the earth is, perfectly circular then the earth’s, gravitational force does no work. The moon’s, instantaneous displacement is tangential, while the earth’s force is radially inwards and, θ = π/2., Work can be both positive and negative. If θ is, between 0o and 90o, cos θ in Eq. (6.4) is positive., If θ is between 90o and 180o, cos θ is negative., In many examples the frictional force opposes, displacement and θ = 180o. Then the work done, by friction is negative (cos 180o = –1)., From Eq. (6.4) it is clear that work and energy, have the same dimensions, [ML2T–2]. The SI unit, of these is joule (J), named after the famous British, physicist James Prescott Joule (1811-1869). Since, work and energy are so widely used as physical, concepts, alternative units abound and some of, these are listed in Table 6.1., , t, , W = (F cos θ )d = F.d, , Table 6.1 Alternative Units of Work/Energy in J, , Example 6.3 A cyclist comes to a skidding, stop in 10 m. During this process, the force, on the cycle due to the road is 200 N and, is directly opposed to the motion. (a) How, much work does the road do on the cycle ?, (b) How much work does the cycle do on, the road ?, , Answer Work done on the cycle by the road is, the work done by the stopping (frictional) force, on the cycle due to the road., (a) The stopping force and the displacement make, an angle of 180o (π rad) with each other., Thus, work done by the road,, Wr = Fd cosθ, = 200 × 10 × cos π, = – 2000 J, It is this negative work that brings the cycle, to a halt in accordance with WE theorem., (b) From Newton’s Third Law an equal and, opposite force acts on the road due to the, cycle. Its magnitude is 200 N. However, the, road undergoes no displacement. Thus,, work done by cycle on the road is zero., t, The lesson of Example 6.3 is that though the, force on a body A exerted by the body B is always, equal and opposite to that on B by A (Newton’s, Third Law); the work done on A by B is not, necessarily equal and opposite to the work done, on B by A., 6.4 KINETIC ENERGY, As noted earlier, if an object of mass m has, velocity v, its kinetic energy K is, , K =, , 1, 1, m v. v = mv 2, 2, 2, , (6.5), , Kinetic energy is a scalar quantity. The kinetic, energy of an object is a measure of the work an, , 2018-19

Page 118 :
118, , PHYSICS, , Table 6.2 Typical kinetic energies (K), , object can do by the virtue of its motion. This, notion has been intuitively known for a long time., The kinetic energy of a fast flowing stream, has been used to grind corn. Sailing, ships employ the kinetic energy of the wind. Table, 6.2 lists the kinetic energies for various, objects., Example 6.4 In a ballistics demonstration, a police officer fires a bullet of mass 50.0 g, with speed 200 m s-1 (see Table 6.2) on soft, plywood of thickness 2.00 cm. The bullet, emerges with only 10% of its initial kinetic, energy. What is the emergent speed of the, bullet ?, , t, , Answer The initial kinetic energy of the bullet, is mv2/2 = 1000 J. It has a final kinetic energy, of 0.1×1000 = 100 J. If vf is the emergent speed, of the bullet,, 1, 2, , 2, mv f, , vf =, , This is illustrated in Fig. 6.3(a). Adding, successive rectangular areas in Fig. 6.3(a) we, get the total work done as, xf, , W≅, , ∑F (x )∆x, , (6.6), , xi, , where the summation is from the initial position, xi to the final position xf., If the displacements are allowed to approach, zero, then the number of terms in the sum, increases without limit, but the sum approaches, a definite value equal to the area under the curve, in Fig. 6.3(b). Then the work done is, W =, , lim xf, lim, F (x )∆x, ∆x → 0, , ∑, xi, , xf, , =, , ∫ F ( x ) dx, , (6.7), , xi, , = 100 J, , where ‘lim’ stands for the limit of the sum when, ∆x tends to zero. Thus, for a varying force, the work done can be expressed as a definite, integral of force over displacement (see also, Appendix 3.1)., , 2 × 100 J, 0.05 kg, , = 63.2 m s–1, The speed is reduced by approximately 68%, (not 90%)., t, 6.5 WORK DONE BY A VARIABLE FORCE, A constant force is rare. It is the variable force,, which is more commonly encountered. Fig. 6.3, is a plot of a varying force in one dimension., If the displacement ∆x is small, we can take, the force F (x) as approximately constant and, the work done is then, ∆W =F (x) ∆x, , Fig. 6.3(a), , 2018-19

Page 119 :
WORK, ENERGY AND POWER, , 119, , The work done by the frictional force is, Wf → area of the rectangle AGHI, Wf = (−50) × 20, = − 1000 J, The area on the negative side of the force axis, has a negative sign., t, 6.6 THE WORK-ENERGY THEOREM FOR A, VARIABLE FORCE, Fig. 6.3 (a) The shaded rectangle represents the, work done by the varying force F(x), over, the small displacement ∆x, ∆W = F(x) ∆x., (b) adding the areas of all the rectangles we, find that for ∆x → 0, the area under the curve, is exactly equal to the work done by F(x)., , Example 6.5 A woman pushes a trunk on, a railway platform which has a rough, surface. She applies a force of 100 N over a, distance of 10 m. Thereafter, she gets, progressively tired and her applied force, reduces linearly with distance to 50 N. The, total distance through which the trunk has, been moved is 20 m. Plot the force applied, by the woman and the frictional force, which, is 50 N versus displacement. Calculate the, work done by the two forces over 20 m., , We are now familiar with the concepts of work, and kinetic energy to prove the work-energy, theorem for a variable force. We confine, ourselves to one dimension. The time rate of, change of kinetic energy is, , dK, d 1, 2, =,  m v , dt, dt  2, dv, v, dt, =F v (from Newton’s Second Law), =m, , =F, , dx, dt, , Thus, dK = Fdx, Integrating from the initial position (x i ) to final, position ( x f ), we have, , t, , Answer, , Kf, , ∫, Ki, , xf, , dK =, , ∫ Fdx, xi, , where, Ki and K f are the initial and final kinetic, energies corresponding to x i and x f., xf, , Fig. 6.4 Plot of the force F applied by the woman and, the opposing frictional force f versus, displacement., , The plot of the applied force is shown in Fig., 6.4. At x = 20 m, F = 50 N (≠ 0). We are given, that the frictional force f is |f|= 50 N. It opposes, motion and acts in a direction opposite to F. It, is therefore, shown on the negative side of the, force axis., The work done by the woman is, WF → area of the rectangle ABCD + area of, the trapezium CEID, 1, WF = 100 × 10 + (100 + 50) × 10, 2, = 1000 + 750, = 1750 J, , or, , K f − Ki =, , ∫ Fdx, , (6.8a), , xi, , From Eq. (6.7), it follows that, Kf − Ki = W, , (6.8b), , Thus, the WE theorem is proved for a variable, force., While the WE theorem is useful in a variety of, problems, it does not, in general, incorporate the, complete dynamical information of Newton’s, second law. It is an integral form of Newton’s, second law. Newton’s second law is a relation, between acceleration and force at any instant of, time. Work-energy theorem involves an integral, over an interval of time. In this sense, the temporal, (time) information contained in the statement of, Newton’s second law is ‘integrated over’ and is, , 2018-19

Page 120 :
120, , PHYSICS, , not available explicitly. Another observation is that, Newton’s second law for two or three dimensions, is in vector form whereas the work-energy, theorem is in scalar form. In the scalar form,, information with respect to directions contained, in Newton’s second law is not present., Example 6.6 A block of mass m = 1 kg,, moving on a horizontal surface with speed, vi = 2 m s–1 enters a rough patch ranging, from x = 0.10 m to x = 2.01 m. The retarding, force Fr on the block in this range is inversely, proportional to x over this range,, , t, , −k, for 0.1 < x < 2.01 m, x, = 0 for x < 0.1m and x > 2.01 m, where k = 0.5 J. What is the final kinetic, energy and speed vf of the block as it, crosses this patch ?, Fr =, , Answer From Eq. (6.8a), 2.01, , K f = Ki +, , ∫, , 0.1, , =, , ( −k ) dx, x, , 1, mvi2 − k ln (x ), 2, , 2.01, 0.1, , d, V(h) = −m g, dh, The negative sign indicates that the, gravitational force is downward. When released,, the ball comes down with an increasing speed., Just before it hits the ground, its speed is given, by the kinematic relation,, v2 = 2gh, This equation can be written as, F =−, , 1, = mvi2 − k ln (2.01/0.1), 2, = 2 − 0.5 ln (20.1), = 2 − 1.5 = 0.5 J, v f = 2K f /m = 1 m s−1, , Here, note that ln is a symbol for the natural, logarithm to the base e and not the logarithm to, the base 10 [ln X = loge X = 2.303 log10 X]., t, 6.7 THE CONCEPT OF POTENTIAL ENERGY, The word potential suggests possibility or, capacity for action. The term potential energy, brings to one’s mind ‘stored’ energy. A stretched, bow-string possesses potential energy. When it, is released, the arrow flies off at a great speed., The earth’s crust is not uniform, but has, discontinuities and dislocations that are called, fault lines. These fault lines in the earth’s crust, , *, , are like ‘compressed springs’. They possess a, large amount of potential energy. An earthquake, results when these fault lines readjust. Thus,, potential energy is the ‘stored energy’ by virtue, of the position or configuration of a body. The, body left to itself releases this stored energy in, the form of kinetic energy. Let us make our notion, of potential energy more concrete., The gravitational force on a ball of mass m is, mg . g may be treated as a constant near the earth, surface. By ‘near’ we imply that the height h of, the ball above the earth’s surface is very small, compared to the earth’s radius RE (h <<RE) so that, we can ignore the variation of g near the earth’s, surface*. In what follows we have taken the, upward direction to be positive. Let us raise the, ball up to a height h. The work done by the external, agency against the gravitational force is mgh. This, work gets stored as potential energy., Gravitational potential energy of an object, as a, function of the height h, is denoted by V(h) and it, is the negative of work done by the gravitational, force in raising the object to that height., V (h) = mgh, If h is taken as a variable, it is easily seen that, the gravitational force F equals the negative of, the derivative of V(h) with respect to h. Thus,, , 1, m v2 = m g h, 2, which shows that the gravitational potential, energy of the object at height h, when the object, is released, manifests itself as kinetic energy of, the object on reaching the ground., Physically, the notion of potential energy is, applicable only to the class of forces where work, done against the force gets ‘stored up’ as energy., When external constraints are removed, it, manifests itself as kinetic energy. Mathematically,, (for simplicity, in one dimension) the potential, , The variation of g with height is discussed in Chapter 8 on Gravitation., , 2018-19

Page 121 :
WORK, ENERGY AND POWER, , energy V(x) is defined if the force F(x) can be, written as, , F (x ) = −, , dV, dx, , This implies that, xf, , ∫, , xi, , Vf, , F(x) dx = − ∫ dV = Vi − V f, Vi, , The work done by a conservative force such as, gravity depends on the initial and final positions, only. In the previous chapter we have worked, on examples dealing with inclined planes. If an, object of mass m is released from rest, from the, top of a smooth (frictionless) inclined plane of, height h, its speed at the bottom, is 2gh irrespective of the angle of inclination., Thus, at the bottom of the inclined plane it, acquires a kinetic energy, mgh. If the work done, or the kinetic energy did depend on other factors, such as the velocity or the particular path taken, by the object, the force would be called nonconservative., The dimensions of potential energy are, [ML2T –2] and the unit is joule (J), the same as, kinetic energy or work. To reiterate, the change, in potential energy, for a conservative force,, ∆V is equal to the negative of the work done by, the force, ∆V = − F(x) ∆x, (6.9), In the example of the falling ball considered in, this section we saw how potential energy was, converted to kinetic energy. This hints at an, important principle of conservation in mechanics,, which we now proceed to examine., 6.8 THE CONSERVATION OF MECHANICAL, ENERGY, For simplicity we demonstrate this important, principle for one-dimensional motion. Suppose, that a body undergoes displacement ∆x under, the action of a conservative force F. Then from, the WE theorem we have,, ∆K = F(x) ∆x, If the force is conservative, the potential energy, function V(x) can be defined such that, − ∆V = F(x) ∆x, The above equations imply that, ∆K + ∆V = 0, ∆(K + V ) = 0, (6.10), , 121, , which means that K + V, the sum of the kinetic, and potential energies of the body is a constant., Over the whole path, xi to xf, this means that, Ki + V(xi ) = Kf + V(xf ), (6.11), The quantity K +V(x), is called the total, mechanical energy of the system. Individually, the kinetic energy K and the potential energy, V(x) may vary from point to point, but the sum, is a constant. The aptness of the term, ‘conservative force’ is now clear., Let us consider some of the definitions of a, conservative force., l, A force F(x) is conservative if it can be derived, from a scalar quantity V(x) by the relation, given by Eq. (6.9). The three-dimensional, generalisation requires the use of a vector, derivative, which is outside the scope of this, book., l, The work done by the conservative force, depends only on the end points. This can be, seen from the relation,, W = Kf – Ki = V (xi ) – V(xf ), which depends on the end points., l, A third definition states that the work done, by this force in a closed path is zero. This is, once again apparent from Eq. (6.11) since, xi = xf ., Thus, the principle of conservation of total, mechanical energy can be stated as, The total mechanical energy of a system is, conserved if the forces, doing work on it, are, conservative., The above discussion can be made more, concrete by considering the example of the, gravitational force once again and that of the, spring force in the next section. Fig. 6.5 depicts, a ball of mass m being dropped from a cliff of, height H., , Fig. 6.5, , 2018-19, , The conversion of potential energy to kinetic, energy for a ball of mass m dropped from a, height H.

Page 122 :
122, , PHYSICS, , The total mechanical energies E0, Eh, and EH, of the ball at the indicated heights zero (ground, level), h and H, are, (6.11 a), , EH = mgH, 1, mvh2, 2, = (1/2) mvf2, , Eh = mgh +, , (6.11 b), , E0, , (6.11 c), , The constant force is a special case of a spatially, dependent force F(x). Hence, the mechanical, energy is conserved. Thus, EH = E0, 1, mgH = mv 2f, or,, 2, , Answer (i) There are two external forces on, the bob : gravity and the tension (T ) in the, string. The latter does no work since the, displacement of the bob is always normal to the, string. The potential energy of the bob is thus, associated with the gravitational force only. The, total mechanical energy E of the system is, conserved. We take the potential energy of the, system to be zero at the lowest point A. Thus,, at A :, E=, , 1, 2, , 2, , mv0, , v f = 2gH, , (6.12), [Newton’s Second Law], , a result that was obtained in section 3.7 for a, freely falling body., Further,, EH = Eh, which implies,, v 2h = 2 g(H − h), , where TA is the tension in the string at A. At the, highest point C, the string slackens, as the, tension in the string (TC ) becomes zero., Thus, at C, , (6.11 d), , and is a familiar result from kinematics., At the height H, the energy is purely potential., It is partially converted to kinetic at height h and, is fully kinetic at ground level. This illustrates, the conservation of mechanical energy., Example 6.7 A bob of mass m is suspended, by a light string of length L . It is imparted a, horizontal velocity vo at the lowest point A, such that it completes a semi-circular, trajectory in the vertical plane with the string, becoming slack only on reaching the topmost, point, C. This is shown in Fig. 6.6. Obtain an, expression for (i) vo; (ii) the speeds at points, B and C; (iii) the ratio of the kinetic energies, (KB/KC) at B and C. Comment on the nature, of the trajectory of the bob after it reaches, the point C., , E=, , 1, mvc2 + 2mgL, 2, , mg =, , mvc2, L, , [Newton’s Second Law], , (6.13), , (6.14), , where vC is the speed at C. From Eqs. (6.13) and, (6.14), , 5, mgL, 2, Equating this to the energy at A, E =, , 5, m 2, mgL =, v0, 2, 2, or,, , v0 = 5 gL, , (ii) It is clear from Eq. (6.14), vC = gL, , At B, the energy is, , E=, , 1, mv 2B + mgL, 2, , Equating this to the energy at A and employing, the result from (i), namely v 02 = 5 gL ,, , 1, 1, mv 2B + mgL = mv02, 2, 2, =, Fig. 6.6, , 2018-19, , 5, m gL, 2, , t

Page 123 :
WORK, ENERGY AND POWER, , 123, , ∴ v B = 3gL, , W =+, , 2, k xm, 2, , (6.16), , (iii) The ratio of the kinetic energies at B and C, is :, 1 2, mv, KB 2 B 3, =, =, 1 2 1, KC, mvC, 2, , At point C, the string becomes slack and the, velocity of the bob is horizontal and to the left. If, the connecting string is cut at this instant, the, bob will execute a projectile motion with, horizontal projection akin to a rock kicked, horizontally from the edge of a cliff. Otherwise, the bob will continue on its circular path and, complete the revolution., t, 6.9 THE POTENTIAL ENERGY OF A SPRING, The spring force is an example of a variable force, which is conservative. Fig. 6.7 shows a block, attached to a spring and resting on a smooth, horizontal surface. The other end of the spring, is attached to a rigid wall. The spring is light, and may be treated as massless. In an ideal, spring, the spring force Fs is proportional to, x where x is the displacement of the block from, the equilibrium position. The displacement could, be either positive [Fig. 6.7(b)] or negative, [Fig. 6.7(c)]. This force law for the spring is called, Hooke’s law and is mathematically stated as, Fs = − kx, The constant k is called the spring constant. Its, unit is N m-1. The spring is said to be stiff if k is, large and soft if k is small., Suppose that we pull the block outwards as in, Fig. 6.7(b). If the extension is xm, the work done by, the spring force is, xm, , xm, , Ws =, , ∫, 0, , =−, , 2, k xm, 2, , Fig. 6.7, , Fs dx, , = − ∫ kx dx, 0, , (6.15), , This expression may also be obtained by, considering the area of the triangle as in, Fig. 6.7(d). Note that the work done by the, external pulling force F is positive since it, overcomes the spring force., , Illustration of the spring force with a block, attached to the free end of the spring., (a) The spring force Fs is zero when the, displacement x from the equilibrium position, is zero. (b) For the stretched spring x > 0, and Fs < 0 (c) For the compressed spring, x < 0 and Fs > 0.(d) The plot of Fs versus x., The area of the shaded triangle represents, the work done by the spring force. Due to the, opposing signs of Fs and x, this work done is, 2, negative, Ws = −kx m, / 2., , The same is true when the spring is, compressed with a displacement xc (< 0). The, spring force does work Ws = − kx c2 / 2 while the, , 2018-19

Page 124 :
124, , PHYSICS, , external force F does work + kx c2 / 2 . If the block, is moved from an initial displacement xi to a, final displacement xf , the work done by the, spring force Ws is, xf, , Ws = − ∫ k x dx, , =, , xi, , k x i2, 2, , −, , k x 2f, , and vice versa, however, the total mechanical, energy remains constant. This is graphically, depicted in Fig. 6.8., , (6.17), , 2, , Thus the work done by the spring force depends, only on the end points. Specifically, if the block, is pulled from xi and allowed to return to xi ;, =, , xi, , k x i2, 2, , −, , k x i2, 2, , =0, (6.18), The work done by the spring force in a cyclic, process is zero. We have explicitly demonstrated, that the spring force (i) is position dependent, only as first stated by Hooke, (Fs = − kx); (ii), does work which only depends on the initial and, final positions, e.g. Eq. (6.17). Thus, the spring, force is a conservative force., We define the potential energy V(x) of the spring, to be zero when block and spring system is in the, equilibrium position. For an extension (or, compression) x the above analysis suggests that, , kx 2, (6.19), 2, You may easily verify that − dV/dx = − k x, the, spring force. If the block of mass m in Fig. 6.7 is, extended to xm and released from rest, then its, total mechanical energy at any arbitrary point x,, where x lies between – xm and + xm, will be given by, V(x) =, , 1, 1, 2 1, k xm, = k x 2 + m v2, 2, 2, 2, where we have invoked the conservation of, mechanical energy. This suggests that the speed, and the kinetic energy will be maximum at the, equilibrium position, x = 0, i.e.,, , Fig. 6.8 Parabolic plots of the potential energy V and, kinetic energy K of a block attached to a, spring obeying Hooke’s law. The two plots, are complementary, one decreasing as the, other increases. The total mechanical, energy E = K + V remains constant., , t, , xi, , Ws = − ∫ k x dx, , Example 6.8 To simulate car accidents, auto, manufacturers study the collisions of moving, cars with mounted springs of different spring, constants. Consider a typical simulation with, a car of mass 1000 kg moving with a speed, 18.0 km/h on a smooth road and colliding, with a horizontally mounted spring of spring, constant 6.25 × 103 N m–1. What is the, maximum compression of the spring ?, , Answer At maximum compression the kinetic, energy of the car is converted entirely into the, potential energy of the spring., The kinetic energy of the moving car is, K =, =, , 1, mv 2, 2, , 1, × 103 × 5 × 5, 2, , K = 1.25 × 104 J, , 1, 1, 2, 2, m vm, = k xm, 2, 2, , where we have converted 18 km h–1 to 5 m s–1 [It is, useful to remember that 36 km h–1 = 10 m s–1]., At maximum compression xm, the potential, energy V of the spring is equal to the kinetic, energy K of the moving car from the principle of, conservation of mechanical energy., , where vm is the maximum speed., or, , vm =, , k, xm, m, , Note that k/m has the dimensions of [T-2] and, our equation is dimensionally correct. The, kinetic energy gets converted to potential energy, , 2018-19, , 1, 2, V = k xm, 2

Page 125 :
WORK, ENERGY AND POWER, , 125, , = 1.25 × 104 J, We obtain, xm = 2.00 m, We note that we have idealised the situation., The spring is considered to be massless. The, surface has been considered to possess, negligible friction., t, We conclude this section by making a few, remarks on conservative forces., (i) Information on time is absent from the above, discussions. In the example considered, above, we can calculate the compression, but, not the time over which the compression, occurs. A solution of Newton’s Second Law, for this system is required for temporal, information., (ii) Not all forces are conservative. Friction, for, example, is a non-conservative force. The, principle of conservation of energy will have, to be modified in this case. This is illustrated, in Example 6.9., (iii) The zero of the potential energy is arbitrary., It is set according to convenience. For the, spring force we took V(x) = 0, at x = 0, i.e. the, unstretched spring had zero potential, energy. For the constant gravitational force, mg, we took V = 0 on the earth’s surface. In, a later chapter we shall see that for the force, due to the universal law of gravitation, the, zero is best defined at an infinite distance, from the gravitational source. However, once, the zero of the potential energy is fixed in a, given discussion, it must be consistently, adhered to throughout the discussion. You, cannot change horses in midstream !, Example 6.9 Consider Example 6.8 taking, the coefficient of friction, µ, to be 0.5 and, calculate the maximum compression of the, spring., , t, , Answer In presence of friction, both the spring, force and the frictional force act so as to oppose, the compression of the spring as shown in, Fig. 6.9., We invoke the work-energy theorem, rather, than the conservation of mechanical energy., The change in kinetic energy is, , Fig. 6.9 The forces acting on the car., , 1, ∆K = Kf − Ki = 0 − m v 2, 2, The work done by the net force is, W =−, , 1, kx m2 − µm g x m, 2, , Equating we have, 1, 1, m v 2 = k x m2 + µm g x m, 2, 2, , Now µmg = 0.5 × 103 × 10 = 5 × 103 N (taking, g =10.0 m s -2). After rearranging the above, equation we obtain the following quadratic, equation in the unknown xm., , k x m2 + 2µm g x m − m v 2 = 0, , where we take the positive square root since, xm is positive. Putting in numerical values we, obtain, xm = 1.35 m, which, as expected, is less than the result in, Example 6.8., If the two forces on the body consist of a, conservative force Fc and a non-conservative, force Fnc , the conservation of mechanical energy, formula will have to be modified. By the WE, theorem, (Fc+ Fnc ) ∆x = ∆K, But, Fc ∆x = − ∆V, Hence,, ∆(K + V) = Fnc ∆x, ∆E = Fnc ∆x, where E is the total mechanical energy. Over, the path this assumes the form, Ef − Ei = Wnc, where W nc is the total work done by the, non-conservative forces over the path. Note that, , 2018-19

Page 126 :
126, , PHYSICS, , unlike the conservative force, Wnc depends on, the particular path i to f., t, 6.10 VARIOUS FORMS OF ENERGY : THE LAW, OF CONSERVATION OF ENERGY, In the previous section we have discussed, mechanical energy. We have seen that it can be, classified into two distinct categories : one based, on motion, namely kinetic energy; the other on, configuration (position), namely potential energy., Energy comes in many a forms which transform, into one another in ways which may not often, be clear to us., 6.10.1 Heat, We have seen that the frictional force is not a, conservative force. However, work is associated, with the force of friction, Example 6.5. A block of, mass m sliding on a rough horizontal surface, with speed v0 comes to a halt over a distance x0., The work done by the force of kinetic friction f, over x 0 is –f x0. By the work-energy theorem, , m vo2/2 = f x 0 . If we confine our scope to, mechanics, we would say that the kinetic energy, of the block is ‘lost’ due to the frictional force., On examination of the block and the table we, would detect a slight increase in their, temperatures. The work done by friction is not, ‘lost’, but is transferred as heat energy. This, raises the internal energy of the block and the, table. In winter, in order to feel warm, we, generate heat by vigorously rubbing our palms, together. We shall see later that the internal, energy is associated with the ceaseless, often, random, motion of molecules. A quantitative idea, of the transfer of heat energy is obtained by, noting that 1 kg of water releases about 42000 J, of energy when it cools by10 °C., 6.10.2 Chemical Energy, One of the greatest technical achievements of, humankind occurred when we discovered how, to ignite and control fire. We learnt to rub two, flint stones together (mechanical energy), got, them to heat up and to ignite a heap of dry leaves, (chemical energy), which then provided, sustained warmth. A matchstick ignites into a, bright flame when struck against a specially, prepared chemical surface. The lighted, matchstick, when applied to a firecracker,, results in a spectacular display of sound and, light., , 2018-19, , Chemical energy arises from the fact that the, molecules participating in the chemical reaction, have different binding energies. A stable chemical, compound has less energy than the separated parts., A chemical reaction is basically a rearrangement, of atoms. If the total energy of the reactants is more, than the products of the reaction, heat is released, and the reaction is said to be an exothermic, reaction. If the reverse is true, heat is absorbed and, the reaction is endothermic. Coal consists of, carbon and a kilogram of it when burnt releases, about 3 × 107 J of energy., Chemical energy is associated with the forces, that give rise to the stability of substances. These, forces bind atoms into molecules, molecules into, polymeric chains, etc. The chemical energy, arising from the combustion of coal, cooking gas,, wood and petroleum is indispensable to our daily, existence., 6.10.3 Electrical Energy, The flow of electrical current causes bulbs to, glow, fans to rotate and bells to ring. There are, laws governing the attraction and repulsion of, charges and currents, which we shall learn, later. Energy is associated with an electric, current. An urban Indian household consumes, about 200 J of energy per second on an average., 6.10.4 The Equivalence of Mass and Energy, Till the end of the nineteenth century, physicists, believed that in every physical and chemical, process, the mass of an isolated system is, conserved. Matter might change its phase, e.g., glacial ice could melt into a gushing stream, but, matter is neither created nor destroyed; Albert, Einstein (1879-1955) however, showed that mass, and energy are equivalent and are related by, the relation, E = m c2, (6.20), where c, the speed of light in vacuum is, approximately 3 ×108 m s–1. Thus, a staggering, amount of energy is associated with a mere, kilogram of matter, E = 1× (3 ×108)2 J = 9 ×1016 J., This is equivalent to the annual electrical output, of a large (3000 MW) power generating station., 6.10.5 Nuclear Energy, The most destructive weapons made by man, the, fission and fusion bombs are manifestations of

Page 127 :
WORK, ENERGY AND POWER, , 127, , Table 6.3 Approximate energy associated with various phenomena, , nucleus like uranium, , 235 ,, 92 U, , t, , the above equivalence of mass and energy [Eq., (6.20)]. On the other hand the explanation of the, life-nourishing energy output of the sun is also, based on the above equation. In this case, effectively four light hydrogen nuclei fuse to form, a helium nucleus whose mass is less than the, sum of the masses of the reactants. This mass, difference, called the mass defect ∆m is the, source of energy (∆m)c2. In fission, a heavy, , Example 6.10 Examine Tables 6.1-6.3, and express (a) The energy required to, break one bond in DNA in eV; (b) The, kinetic energy of an air molecule (10—21 J), in eV; (c) The daily intake of a human adult, in kilocalories., , Answer (a) Energy required to break one bond, of DNA is, , is split by a neutron, , into lighter nuclei. Once again the final mass is, less than the initial mass and the mass difference, translates into energy, which can be tapped to, provide electrical energy as in nuclear power, plants (controlled nuclear fission) or can be, employed in making nuclear weapons, (uncontrolled nuclear fission). Strictly, the energy, ∆E released in a chemical reaction can also be, related to the mass defect ∆m = ∆E/c2. However,, for a chemical reaction, this mass defect is much, smaller than for a nuclear reaction. Table 6.3, lists the total energies for a variety of events and, phenomena., , 10 −20 J, ~ 0.06 eV, 1.6 × 10 −19 J/eV, , Note 0.1 eV = 100 meV (100 millielectron volt)., (b) The kinetic energy of an air molecule is, 10 −21 J, ~ 0.0062 eV, 1.6 × 10 −19 J/eV, , This is the same as 6.2 meV., (c) The average human consumption in a day is, , 107 J, 4.2 ×103 J/kcal, , 2018-19, , ~ 2400 kcal

Page 128 :
128, , PHYSICS, , We point out a common misconception created, by newspapers and magazines. They mention, food values in calories and urge us to restrict, diet intake to below 2400 calories. What they, should be saying is kilocalories (kcal) and not, calories. A person consuming 2400 calories a, day will soon starve to death! 1 food calorie is, 1 kcal., t, , The instantaneous power is defined as the, limiting value of the average power as time, interval approaches zero,, , 6.10.6 The Principle of Conservation of, Energy, , The work dW done by a force F for a displacement, dr is dW = F.dr. The instantaneous power can, also be expressed as, , We have seen that the total mechanical energy, of the system is conserved if the forces doing work, on it are conservative. If some of the forces, involved are non-conservative, part of the, mechanical energy may get transformed into, other forms such as heat, light and sound., However, the total energy of an isolated system, does not change, as long as one accounts for all, forms of energy. Energy may be transformed from, one form to another but the total energy of an, isolated system remains constant. Energy can, neither be created, nor destroyed., Since the universe as a whole may be viewed, as an isolated system, the total energy of the, universe is constant. If one part of the universe, loses energy, another part must gain an equal, amount of energy., The principle of conservation of energy cannot, be proved. However, no violation of this principle, has been observed. The concept of conservation, and transformation of energy into various forms, links together various branches of physics,, chemistry and life sciences. It provides a, unifying, enduring element in our scientific, pursuits. From engineering point of view all, electronic, communication and mechanical, devices rely on some forms of energy, transformation., 6.11 POWER, Often it is interesting to know not only the work, done on an object, but also the rate at which, this work is done. We say a person is physically, fit if he not only climbs four floors of a building, but climbs them fast. Power is defined as the, time rate at which work is done or energy is, transferred., The average power of a force is defined as the, ratio of the work, W, to the total time t taken, , 2018-19, , Pav =, , P =, , dW, dt, , P = F., , W, t, , (6.21), , dr, dt, , = F.v, , (6.22), , where v is the instantaneous velocity when the, force is F., Power, like work and energy, is a scalar, quantity. Its dimensions are [ML2T –3]. In the SI,, its unit is called a watt (W). The watt is 1 J s–1., The unit of power is named after James Watt,, one of the innovators of the steam engine in the, eighteenth century., There is another unit of power, namely the, horse-power (hp), 1 hp = 746 W, This unit is still used to describe the output of, automobiles, motorbikes, etc., We encounter the unit watt when we buy, electrical goods such as bulbs, heaters and, refrigerators. A 100 watt bulb which is on for 10, hours uses 1 kilowatt hour (kWh) of energy., 100 (watt) × 10 (hour), = 1000 watt hour, =1 kilowatt hour (kWh), = 103 (W) × 3600 (s), = 3.6 × 106 J, Our electricity bills carry the energy, consumption in units of kWh. Note that kWh is, a unit of energy and not of power., u Example 6.11 An elevator can carry a, maximum load of 1800 kg (elevator +, passengers) is moving up with a constant, speed of 2 m s–1. The frictional force opposing, the motion is 4000 N. Determine the, minimum power delivered by the motor to, the elevator in watts as well as in horse, power.

Page 129 :
WORK, ENERGY AND POWER, , 129, , Answer The downward force on the elevator is, F = m g + Ff = (1800 × 10) + 4000 = 22000 N, The motor must supply enough power to balance, this force. Hence,, P = F. v = 22000 × 2 = 44000 W = 59 hp, , t, , 6.12 COLLISIONS, In physics we study motion (change in position)., At the same time, we try to discover physical, quantities, which do not change in a physical, process. The laws of momentum and energy, conservation are typical examples. In this, section we shall apply these laws to a commonly, encountered phenomena, namely collisions., Several games such as billiards, marbles or, carrom involve collisions.We shall study the, collision of two masses in an idealised form., Consider two masses m1 and m2. The particle, m1 is moving with speed v1i , the subscript ‘i’, implying initial. We can cosider m2 to be at rest., No loss of generality is involved in making such, a selection. In this situation the mass m 1, collides with the stationary mass m2 and this, is depicted in Fig. 6.10., , by the second particle. F21 is likewise the force, exerted on the second particle by the first particle., Now from Newton’s third law, F12 = − F21. This, implies, ∆p1 + ∆p2 = 0, The above conclusion is true even though the, forces vary in a complex fashion during the, collision time ∆t. Since the third law is true at, every instant, the total impulse on the first object, is equal and opposite to that on the second., On the other hand, the total kinetic energy of, the system is not necessarily conserved. The, impact and deformation during collision may, generate heat and sound. Part of the initial kinetic, energy is transformed into other forms of energy., A useful way to visualise the deformation during, collision is in terms of a ‘compressed spring’. If, the ‘spring’ connecting the two masses regains, its original shape without loss in energy, then, the initial kinetic energy is equal to the final, kinetic energy but the kinetic energy during the, collision time ∆t is not constant. Such a collision, is called an elastic collision. On the other hand, the deformation may not be relieved and the two, bodies could move together after the collision. A, collision in which the two particles move together, after the collision is called a completely inelastic, collision. The intermediate case where the, deformation is partly relieved and some of the, initial kinetic energy is lost is more common and, is appropriately called an inelastic collision., 6.12.2 Collisions in One Dimension, , Fig. 6.10 Collision of mass m1, with a stationary mass m2., , Consider first a completely inelastic collision, in one dimension. Then, in Fig. 6.10,, , The masses m 1 and m 2 fly-off in different, directions. We shall see that there are, relationships, which connect the masses, the, velocities and the angles., , θ1 =θ2 = 0, m1v1i = (m1+m2)vf (momentum conservation), vf =, , 6.12.1 Elastic and Inelastic Collisions, In all collisions the total linear momentum is, conserved; the initial momentum of the system, is equal to the final momentum of the system., One can argue this as follows. When two objects, collide, the mutual impulsive forces acting over, the collision time ∆t cause a change in their, respective momenta :, ∆p1 = F12 ∆t, ∆p2 = F21 ∆t, , m1, v1i, m1 + m 2, , (6.23), , The loss in kinetic energy on collision is, , ∆K =, , =, , 1, 1, m1v1i2 − (m1 + m 2 )v 2f, 2, 2, , 1, 1, m12, m1v12i −, v12i, 2, 2 m1 + m 2, , =, , where F12 is the force exerted on the first particle, , 2018-19, , , m1 , 1, m1v12i 1 −, , 2,  m1 + m 2 , , [using Eq. (6.23)]

Page 130 :
130, , PHYSICS, , An experiment on head-on collision, In performing an experiment on collision on a horizontal surface, we face three difficulties., One, there will be friction and bodies will not travel with uniform velocities. Two, if two bodies, of different sizes collide on a table, it would be difficult to arrange them for a head-on collision, unless their centres of mass are at the same height above the surface. Three, it will be fairly, difficult to measure velocities of the two bodies just before and just after collision., By performing this experiment in a vertical direction, all the three difficulties vanish. Take, two balls, one of which is heavier (basketball/football/volleyball) and the other lighter (tennis, ball/rubber ball/table tennis ball). First take only the heavier ball and drop it vertically from, some height, say 1 m. Note to which it rises. This gives the velocities near the floor or ground,, just before and just after the bounce (by using v 2 = 2 gh ). Hence you, will get the coefficient of restitution., Now take the big ball and a small ball and hold them in your, hands one over the other, with the heavier ball below the lighter, one, as shown here. Drop them together, taking care that they remain, together while falling, and see what happens. You will find that the, heavier ball rises less than when it was dropped alone, while the, lighter one shoots up to about 3 m. With practice, you will be able to, hold the ball properly so that the lighter ball rises vertically up and, does not fly sideways. This is head-on collision., You can try to find the best combination of balls which gives you, the best effect. You can measure the masses on a standard balance., We leave it to you to think how you can determine the initial and, final velocities of the balls., , =, , v1 f =, , 1 m1m 2 2, v1i, 2 m1 + m 2, , Consider next an elastic collision. Using the, above nomenclature with θ 1 = θ 2 = 0, the, momentum and kinetic energy conservation, equations are, m1v1i = m1v1f + m2v2f, , (6.24), , m v =m v, , (6.25), , 2, 1 1i, , 2, 1 1f, , +m v, , 2, 2 2f, , From Eqs. (6.24) and (6.25) it follows that,, , v 2 f (v1i − v1 f ) = v12i − v12f, = (v1i − v1 f )(v1i + v1 f ), ∴ v 2 f = v1i + v1 f, , Case I : If the two masses are equal, v1f = 0, v2f = v1i, The first mass comes to rest and pushes off the, second mass with its initial speed on collision., , t, , Hence,, , v2 f =, , Case II : If one mass dominates, e.g. m2 > > m1, v1f ~ − v1i, v2f ~ 0, The heavier mass is undisturbed while the, lighter mass reverses its velocity., , m 1v1i (v 2 f − v1i ) = m1v1 f (v 2 f − v1 f ), , or,, , (6.27), , 2m1v1i, (6.28), m1 + m 2, Thus, the ‘unknowns’ {v1f, v2f} are obtained in, terms of the ‘knowns’ {m1, m2, v1i}. Special cases, of our analysis are interesting., , and, , which is a positive quantity as expected., , (m 1 − m 2 ), v1i, m1 + m 2, , (6.26), , Substituting this in Eq. (6.24), we obtain, , 2018-19, , Example 6.12 Slowing down of neutrons:, In a nuclear reactor a neutron of high, speed (typically 107 m s–1) must be slowed

Page 131 :
WORK, ENERGY AND POWER, , 131, , to 103 m s–1 so that it can have a high, , 6.12.3 Collisions in Two Dimensions, , probability of interacting with isotope 235, 92 U, and causing it to fission. Show that a, neutron can lose most of its kinetic energy, in an elastic collision with a light nuclei, like deuterium or carbon which has a mass, of only a few times the neutron mass. The, material making up the light nuclei, usually, heavy water (D2O) or graphite, is called a, moderator., , Fig. 6.10 also depicts the collision of a moving, mass m1 with the stationary mass m2. Linear, momentum is conserved in such a collision., Since momentum is a vector this implies three, equations for the three directions {x, y, z}., Consider the plane determined by the final, velocity directions of m1 and m2 and choose it to, be the x-y plane. The conservation of the, z-component of the linear momentum implies, that the entire collision is in the x-y plane. The, x- and y-component equations are, , Answer The initial kinetic energy of the neutron, is, , K1i =, , 1, m1v12i, 2, , while its final kinetic energy from Eq. (6.27), K1 f, , 1, = m 1v12f, 2, , 2, ,  m − m2  2, 1, = m1  1, v1i, 2,  m1 + m 2 , , K1i, , m − m2 , = 1,  m 1 + m 2 , , f2 = 1 − f1 (elastic collision), , =, , 4m1m 2, , (m1 + m 2 )2, , (6.31), , We obtain an additional equation. That still, leaves us one equation short. At least one of, the four unknowns, say θ 1, must be made known, for the problem to be solvable. For example, θ1, can be determined by moving a detector in an, angular fashion from the x to the y axis. Given, {m1, m2, v1i , θ1} we can determine {v1f , v2f , θ2}, from Eqs. (6.29)-(6.31)., , One can also verify this result by substituting, from Eq. (6.28)., For deuterium m 2 = 2m 1 and we obtain, f1 = 1/9 while f2 = 8/9. Almost 90% of the, neutron’s energy is transferred to deuterium. For, carbon f1 = 71.6% and f2 = 28.4%. In practice,, however, this number is smaller since head-on, collisions are rare., t, If the initial velocities and final velocities of, both the bodies are along the same straight line,, then it is called a one-dimensional collision, or, head-on collision. In the case of small spherical, bodies, this is possible if the direction of travel, of body 1 passes through the centre of body 2, which is at rest. In general, the collision is twodimensional, where the initial velocities and the, final velocities lie in a plane., , (6.30), , 1, 1, 1, m1v1i 2 = m1v1 f 2 + m 2v2 f 2, 2, 2, 2, , 2, , while the fractional kinetic energy gained by the, moderating nuclei K2f /K1i is, , 0 = m1v1f sin θ1 − m2v2f sin θ2, , If, further the collision is elastic,, , t, , K1 f, , (6.29), , One knows {m1, m2, v1i} in most situations. There, are thus four unknowns {v1f , v2f , θ1 and θ2}, and, only two equations. If θ 1 = θ 2 = 0, we regain, Eq. (6.24) for one dimensional collision., , The fractional kinetic energy lost is, f1 =, , m1v1i = m1v1f cos θ 1 + m2v2f cos θ 2, , Example 6.13 Consider the collision, depicted in Fig. 6.10 to be between two, billiard balls with equal masses m1 = m2., The first ball is called the cue while the, second ball is called the target. The, billiard player wants to ‘sink’ the target, ball in a corner pocket, which is at an, angle θ2 = 37°. Assume that the collision, is elastic and that friction and rotational, motion are not important. Obtain θ 1., , Answer From momentum conservation, since, the masses are equal, , v1i = v1f + v 2f, or, , (, , )(, , v 1i 2 = v1 f + v 2 f ⋅ v1 f + v 2 f, = v1 f 2 + v 2 f 2 + 2v1 f .v2 f, , 2018-19, , )

Page 132 :
132, , =, , PHYSICS, , {v, , 2, , 1f, , + v 2 f 2 + 2v1 f v 2 f cos (θ1 + 37° ), , }, , (6.32), , Since the collision is elastic and m1 = m2 it follows, from conservation of kinetic energy that, v1i 2 = v1 f 2 + v 2 f 2, , (6.33), , Comparing Eqs. (6.32) and (6.33), we get, cos (θ1 + 37°) = 0, or, , θ1 + 37° = 90°, , Thus, θ1 = 53°, This proves the following result : when two equal, masses undergo a glancing elastic collision with, one of them at rest, after the collision, they will, move at right angles to each other., t, , The matter simplifies greatly if we consider, spherical masses with smooth surfaces, and, assume that collision takes place only when the, bodies touch each other. This is what happens, in the games of marbles, carrom and billiards., In our everyday world, collisions take place only, when two bodies touch each other. But consider, a comet coming from far distances to the sun, or, alpha particle coming towards a nucleus and, going away in some direction. Here we have to, deal with forces involving action at a distance., Such an event is called scattering. The velocities, and directions in which the two particles go away, depend on their initial velocities as well as the, type of interaction between them, their masses,, shapes and sizes., , SUMMARY, 1., , 2., , 3., , The work-energy theorem states that the change in kinetic energy of a body is the work, done by the net force on the body., Kf - Ki = Wnet, A force is conservative if (i) work done by it on an object is path independent and, depends only on the end points {xi, xj}, or (ii) the work done by the force is zero for an, arbitrary closed path taken by the object such that it returns to its initial position., For a conservative force in one dimension, we may define a potential energy function V(x), such that, , F (x ) = −, , dV (x ), dx, xf, , or, , Vi − V f =, , ∫ F ( x ) dx, , xi, , 4., 5., , 6., , The principle of conservation of mechanical energy states that the total mechanical, energy of a body remains constant if the only forces that act on the body are conservative., The gravitational potential energy of a particle of mass m at a height x about the earth’s, surface is, V(x) = m g x, where the variation of g with height is ignored., The elastic potential energy of a spring of force constant k and extension x is, , V (x ) =, 7., , 1, k x2, 2, , The scalar or dot product of two vectors A and B is written as A.B and is a scalar, quantity given by : A.B = AB cos θ, where θ is the angle between A and B. It can be, positive, negative or zero depending upon the value of θ. The scalar product of two, vectors can be interpreted as the product of magnitude of one vector and component, of the other vector along the first vector. For unit vectors :, , ˆi ⋅ ˆi = ˆj ⋅ ˆj = k, ˆ ⋅k, ˆ = 1 and ˆi ⋅ ˆj = ˆj ⋅ k, ˆ =k, ˆ ⋅ ˆi = 0, Scalar products obey the commutative and the distributive laws., , 2018-19

Page 133 :
WORK, ENERGY AND POWER, , 133, , POINTS TO PONDER, 1., , 2., , 3., , The phrase ‘calculate the work done’ is incomplete. We should refer (or imply, clearly by context) to the work done by a specific force or a group of forces on a, given body over a certain displacement., Work done is a scalar quantity. It can be positive or negative unlike mass and, kinetic energy which are positive scalar quantities. The work done by the friction, or viscous force on a moving body is negative., For two bodies, the sum of the mutual forces exerted between them is zero from, Newton’s Third Law,, F12 + F21 = 0, But the sum of the work done by the two forces need not always cancel, i.e., W12 + W21 ≠ 0, , 4., , 5., , 6., , 7., , 8., , 9., , However, it may sometimes be true., The work done by a force can be calculated sometimes even if the exact nature of, the force is not known. This is clear from Example 6.2 where the WE theorem is, used in such a situation., The WE theorem is not independent of Newton’s Second Law. The WE theorem, may be viewed as a scalar form of the Second Law. The principle of conservation, of mechanical energy may be viewed as a consequence of the WE theorem for, conservative forces., The WE theorem holds in all inertial frames. It can also be extended to noninertial frames provided we include the pseudoforces in the calculation of the, net force acting on the body under consideration., The potential energy of a body subjected to a conservative force is always, undetermined upto a constant. For example, the point where the potential, energy is zero is a matter of choice. For the gravitational potential energy mgh,, the zero of the potential energy is chosen to be the ground. For the spring, potential energy kx2/2 , the zero of the potential energy is the equilibrium position, of the oscillating mass., Every force encountered in mechanics does not have an associated potential, energy. For example, work done by friction over a closed path is not zero and no, potential energy can be associated with friction., During a collision : (a) the total linear momentum is conserved at each instant of, the collision ; (b) the kinetic energy conservation (even if the collision is elastic), applies after the collision is over and does not hold at every instant of the collision., In fact the two colliding objects are deformed and may be momentarily at rest, with respect to each other., , 2018-19

Page 134 :
134, , PHYSICS, , EXERCISES, 6.1, , 6.2, , 6.3, , The sign of work done by a force on a body is important to understand. State carefully, if the following quantities are positive or negative:, (a) work done by a man in lifting a bucket out of a well by means of a rope tied to the, bucket., (b) work done by gravitational force in the above case,, (c) work done by friction on a body, sliding down an inclined plane,, (d) work done by an applied force on, a body moving on a rough, horizontal plane with uniform, velocity,, (e) work done by the resistive force of, air on a vibrating pendulum in, bringing it to rest., A body of mass 2 kg initially at rest, moves under the action of an applied, horizontal force of 7 N on a table with, coefficient of kinetic friction = 0.1., Compute the, (a) work done by the applied force in, 10 s,, (b) work done by friction in 10 s,, (c) work done by the net force on the, body in 10 s,, (d) change in kinetic energy of the, body in 10 s,, and interpret your results., Given in Fig. 6.11 are examples of some, potential energy functions in one, dimension. The total energy of the, particle is indicated by a cross on the, ordinate axis. In each case, specify the, regions, if any, in which the particle, cannot be found for the given energy., Also, indicate the minimum total, energy the particle must have in each, case. Think of simple physical contexts, for which these potential energy shapes, are relevant., , Fig. 6.11, , 2018-19

Page 135 :
WORK, ENERGY AND POWER, , 6.4, , 135, , The potential energy function for a, particle executing linear simple, harmonic motion is given by V(x) =, kx2/2, where k is the force constant, of the oscillator. For k = 0.5 N m-1,, the graph of V(x) versus x is shown, in Fig. 6.12. Show that a particle of, total energy 1 J moving under this, potential must ‘turn back’ when it, reaches x = ± 2 m., , Fig. 6.12, , 6.5, , Answer the following :, (a) The casing of a rocket in flight, burns up due to friction. At, whose expense is the heat, energy required for burning, obtained? The rocket or the, atmosphere?, (b) Comets move around the sun, in highly elliptical orbits. The, gravitational force on the, Fig. 6.13, comet due to the sun is not, normal to the comet’s velocity, in general. Yet the work done by the gravitational force over every complete orbit, of the comet is zero. Why ?, (c) An artificial satellite orbiting the earth in very thin atmosphere loses its energy, gradually due to dissipation against atmospheric resistance, however small. Why, then does its speed increase progressively as it comes closer and closer to the earth ?, (d) In Fig. 6.13(i) the man walks 2 m carrying a mass of 15 kg on his hands. In Fig., 6.13(ii), he walks the same distance pulling the rope behind him. The rope goes, over a pulley, and a mass of 15 kg hangs at its other end. In which case is the work, done greater ?, , 6.6, , Underline the correct alternative :, (a) When a conservative force does positive work on a body, the potential energy of, the body increases/decreases/remains unaltered., (b) Work done by a body against friction always results in a loss of its kinetic/potential, energy., (c) The rate of change of total momentum of a many-particle system is proportional, to the external force/sum of the internal forces on the system., (d) In an inelastic collision of two bodies, the quantities which do not change after, the collision are the total kinetic energy/total linear momentum/total energy of, the system of two bodies., , 6.7, , State if each of the following statements is true or false. Give reasons for your answer., (a) In an elastic collision of two bodies, the momentum and energy of each body is, conserved., (b) Total energy of a system is always conserved, no matter what internal and external, forces on the body are present., (c) Work done in the motion of a body over a closed loop is zero for every force in, nature., (d) In an inelastic collision, the final kinetic energy is always less than the initial, kinetic energy of the system., Answer carefully, with reasons :, (a) In an elastic collision of two billiard balls, is the total kinetic energy conserved, during the short time of collision of the balls (i.e. when they are in contact) ?, (b) Is the total linear momentum conserved during the short time of an elastic collision, of two balls ?, , 6.8, , 2018-19

Page 136 :
136, , PHYSICS, , (c) What are the answers to (a) and (b) for an inelastic collision ?, (d) If the potential energy of two billiard balls depends only on the separation distance, between their centres, is the collision elastic or inelastic ? (Note, we are talking, here of potential energy corresponding to the force during collision, not gravitational, potential energy)., 6.9 A body is initially at rest. It undergoes one-dimensional motion with constant, acceleration. The power delivered to it at time t is proportional to, (i) t1/2, (ii) t, (iii) t3/2, (iv) t2, 6.10 A body is moving unidirectionally under the influence of a source of constant power., Its displacement in time t is proportional to, (i) t1/2, (ii) t, (iii) t3/2, (iv) t2, 6.11 A body constrained to move along the z-axis of a coordinate system is subject to a, constant force F given by, ˆ N, F = −ˆi + 2 ˆj + 3 k, , 6.12, , 6.13, , 6.14, , 6.15, , 6.16, , ˆ are unit vectors along the x-, y- and z-axis of the system respectively., where ˆi, ˆj, k, What is the work done by this force in moving the body a distance of 4 m along the, z-axis ?, An electron and a proton are detected in a cosmic ray experiment, the first with kinetic, energy 10 keV, and the second with 100 keV. Which is faster, the electron or the, proton ? Obtain the ratio of their speeds. (electron mass = 9.11×10-31 kg, proton mass, = 1.67×10–27 kg, 1 eV = 1.60 ×10–19 J)., A rain drop of radius 2 mm falls from a height of 500 m above the ground. It falls with, decreasing acceleration (due to viscous resistance of the air) until at half its original, height, it attains its maximum (terminal) speed, and moves with uniform speed, thereafter. What is the work done by the gravitational force on the drop in the first, and second half of its journey ? What is the work done by the resistive force in the, entire journey if its speed on reaching the ground is 10 m s–1 ?, A molecule in a gas container hits a horizontal wall with speed 200 m s–1 and angle 30°, with the normal, and rebounds with the same speed. Is momentum conserved in the, collision ? Is the collision elastic or inelastic ?, A pump on the ground floor of a building can pump up water to fill a tank of volume 30 m3, in 15 min. If the tank is 40 m above the ground, and the efficiency of the pump is 30%,, how much electric power is consumed by the pump ?, Two identical ball bearings in contact with each other and resting on a frictionless, table are hit head-on by another ball bearing of the same mass moving initially with a, speed V. If the collision is elastic, which of the following (Fig. 6.14) is a possible result, after collision ?, , Fig. 6.14, , 2018-19

Page 137 :
WORK, ENERGY AND POWER, , 137, , 6.17 The bob A of a pendulum released from 30o to the, vertical hits another bob B of the same mass at rest, on a table as shown in Fig. 6.15. How high does, the bob A rise after the collision ? Neglect the size of, the bobs and assume the collision to be elastic., , 6.18 The bob of a pendulum is released from a horizontal, position. If the length of the pendulum is 1.5 m,, what is the speed with which the bob arrives at the, lowermost point, given that it dissipated 5% of its, initial energy against air resistance ?, 6.19 A trolley of mass 300 kg carrying a sandbag of 25 kg, is moving uniformly with a speed of 27 km/h on a, Fig. 6.15, frictionless track. After a while, sand starts leaking, out of a hole on the floor of the trolley at the rate of, 0.05 kg s–1. What is the speed of the trolley after the entire sand bag is empty ?, 6.20 A body of mass 0.5 kg travels in a straight line with velocity v =a x3/2 where a = 5 m–1/2 s–1., What is the work done by the net force during its displacement from x = 0 to, x=2m?, 6.21 The blades of a windmill sweep out a circle of area A. (a) If the wind flows at a, velocity v perpendicular to the circle, what is the mass of the air passing through it, in time t ? (b) What is the kinetic energy of the air ? (c) Assume that the windmill, converts 25% of the wind’s energy into electrical energy, and that A = 30 m2, v = 36, km/h and the density of air is 1.2 kg m–3. What is the electrical power produced ?, 6.22 A person trying to lose weight (dieter) lifts a 10 kg mass, one thousand times, to a, height of 0.5 m each time. Assume that the potential energy lost each time she, lowers the mass is dissipated. (a) How much work does she do against the gravitational, force ? (b) Fat supplies 3.8 × 107J of energy per kilogram which is converted to, mechanical energy with a 20% efficiency rate. How much fat will the dieter use up?, 6.23 A family uses 8 kW of power. (a) Direct solar energy is incident on the horizontal, surface at an average rate of 200 W per square meter. If 20% of this energy can be, converted to useful electrical energy, how large an area is needed to supply 8 kW?, (b) Compare this area to that of the roof of a typical house., Additional Exercises, 6.24 A bullet of mass 0.012 kg and horizontal speed 70 m s–1 strikes a block of wood of, mass 0.4 kg and instantly comes to rest with respect to the block. The block is, suspended from the ceiling by means of thin wires. Calculate the height to which, the block rises. Also, estimate the amount of heat produced in the block., 6.25 Two inclined frictionless tracks, one gradual and the other steep meet at A from, where two stones are allowed to slide down from rest, one on each track (Fig. 6.16)., Will the stones reach the bottom at the same time? Will they reach there with the, same speed? Explain. Given θ1 = 300, θ2 = 600, and h = 10 m, what are the speeds and, times taken by the two stones ?, , Fig. 6.16, , 2018-19

Page 138 :
138, , PHYSICS, , 6.26 A 1 kg block situated on a rough incline is connected to a spring of spring constant 100, N m–1 as shown in Fig. 6.17. The block is released from rest with the spring in the, unstretched position. The block moves 10 cm down the incline before coming to rest., Find the coefficient of friction between the block and the incline. Assume that the, spring has a negligible mass and the pulley is frictionless., , Fig. 6.17, 6.27 A bolt of mass 0.3 kg falls from the ceiling of an elevator moving down with an uniform, speed of 7 m s–1. It hits the floor of the elevator (length of the elevator = 3 m) and does, not rebound. What is the heat produced by the impact ? Would your answer be different, if the elevator were stationary ?, 6.28 A trolley of mass 200 kg moves with a uniform speed of 36 km/h on a frictionless track., A child of mass 20 kg runs on the trolley from one end to the other (10 m away) with a, speed of 4 m s–1 relative to the trolley in a direction opposite to the its motion, and, jumps out of the trolley. What is the final speed of the trolley ? How much has the, trolley moved from the time the child begins to run ?, 6.29 Which of the following potential energy curves in Fig. 6.18 cannot possibly describe the, elastic collision of two billiard balls ? Here r is the distance between centres of the balls., , Fig. 6.18, 6.30 Consider the decay of a free neutron at rest : n g p + e–, , 2018-19

Page 139 :
WORK, ENERGY AND POWER, , 139, , Show that the two-body decay of this type must necessarily give an electron of fixed, energy and, therefore, cannot account for the observed continuous energy distribution, in the β-decay of a neutron or a nucleus (Fig. 6.19)., , Fig. 6.19, [Note: The simple result of this exercise was one among the several arguments advanced by W., Pauli to predict the existence of a third particle in the decay products of β-decay. This, particle is known as neutrino. We now know that it is a particle of intrinsic spin ½ (like, e—, p or n), but is neutral, and either massless or having an extremely small mass, (compared to the mass of electron) and which interacts very weakly with matter. The, correct decay process of neutron is : n g p + e – + ν ], , 2018-19

Page 140 :
140, , PHYSICS, , APPENDIX 6.1 : POWER CONSUMPTION IN WALKING, The table below lists the approximate power expended by an adult human of mass 60 kg., Table 6.4 Approximate power consumption, Mechanical work must not be confused with the everyday usage, of the term work. A woman standing with a very heavy load on, her head may get very tired. But no mechanical work is involved., That is not to say that mechanical work cannot be estimated in, ordinary human activity., Consider a person walking with constant speed v0. The mechanical work he does may be estimated simply, with the help of the work-energy theorem. Assume :, (a) The major work done in walking is due to the acceleration and deceleration of the legs with each stride, (See Fig. 6.20)., (b) Neglect air resistance., (c) Neglect the small work done in lifting the legs against gravity., (d) Neglect the swinging of hands etc. as is common in walking., As we can see in Fig. 6.20, in each stride the leg is brought from rest to a speed, approximately equal to the, speed of walking, and then brought to rest again., , Fig. 6.20 An illustration of a single stride in walking. While the first leg is maximally off the round, the second leg, is on the ground and vice-versa, The work done by one leg in each stride is m l v 02 by the work-energy theorem. Here ml is the mass of the leg., Note m l v 02 /2 energy is expended by one set of leg muscles to bring the foot from rest to speed v0 while an, additional m l v 02 /2 is expended by a complementary set of leg muscles to bring the foot to rest from speed v0., Hence work done by both legs in one stride is (study Fig. 6.20 carefully), , Ws =2m l v02, , (6.34), , Assuming ml = 10 kg and slow running of a nine-minute mile which translates to 3 m s-1 in SI units, we obtain, Ws = 180 J / stride, If we take a stride to be 2 m long, the person covers 1.5 strides per second at his speed of 3 m s-1. Thus the, power expended, , = 270 W, We must bear in mind that this is a lower estimate since several avenues of power loss (e.g. swinging of hands,, air resistance etc.) have been ignored. The interesting point is that we did not worry about the forces involved., The forces, mainly friction and those exerted on the leg by the muscles of the rest of the body, are hard to, estimate. Static friction does no work and we bypassed the impossible task of estimating the work done by the, muscles by taking recourse to the work-energy theorem. We can also see the advantage of a wheel. The wheel, permits smooth locomotion without the continual starting and stopping in mammalian locomotion., , 2018-19

Page 141 :
CHAPTER SEVEN, , SYSTEMS, , OF, , PARTICLES, , AND, , ROTATIONAL MOTION, , 7.1 INTRODUCTION, , 7.1, 7.2, 7.3, 7.4, 7.5, 7.6, 7.7, 7.8, 7.9, 7.10, 7.11, 7.12, 7.13, 7.14, , Introduction, Centre of mass, Motion of centre of mass, Linear momentum of a, system of particles, Vector product of two, vectors, Angular velocity and its, relation with linear velocity, Torque, and, angular, momentum, Equilibrium of a rigid body, Moment of inertia, Theorems of perpendicular, and parallel axes, Kinematics of rotational, motion about a fixed axis, Dynamics of rotational, motion about a fixed axis, Angular momentum in case, of rotation about a fixed axis, Rolling motion, Summary, Points to Ponder, Exercises, Additional exercises, , In the earlier chapters we primarily considered the motion, of a single particle. (A particle is ideally represented as a, point mass having no size.) We applied the results of our, study even to the motion of bodies of finite size, assuming, that motion of such bodies can be described in terms of the, motion of a particle., Any real body which we encounter in daily life has a, finite size. In dealing with the motion of extended bodies, (bodies of finite size) often the idealised model of a particle is, inadequate. In this chapter we shall try to go beyond this, inadequacy. We shall attempt to build an understanding of, the motion of extended bodies. An extended body, in the, first place, is a system of particles. We shall begin with the, consideration of motion of the system as a whole. The centre, of mass of a system of particles will be a key concept here., We shall discuss the motion of the centre of mass of a system, of particles and usefulness of this concept in understanding, the motion of extended bodies., A large class of problems with extended bodies can be, solved by considering them to be rigid bodies. Ideally a, rigid body is a body with a perfectly definite and, unchanging shape. The distances between all pairs of, particles of such a body do not change. It is evident from, this definition of a rigid body that no real body is truly rigid,, since real bodies deform under the influence of forces. But in, many situations the deformations are negligible. In a number, of situations involving bodies such as wheels, tops, steel, beams, molecules and planets on the other hand, we can ignore, that they warp (twist out of shape), bend or vibrate and treat, them as rigid., 7.1.1 What kind of motion can a rigid body have?, Let us try to explore this question by taking some examples, of the motion of rigid bodies. Let us begin with a rectangular, , 2018-19

Page 142 :
142, , PHYSICS, , Fig 7.1 Translational (sliding) motion of a block down, an inclined plane., (Any point like P1 or P2 of the block moves, with the same velocity at any instant of time.), , block sliding down an inclined plane without any, sidewise movement. The block is taken as a rigid, body. Its motion down the plane is such that all, the particles of the body are moving together,, i.e. they have the same velocity at any instant, of time. The rigid body here is in pure, translational motion (Fig. 7.1)., In pure translational motion at any, instant of time, all particles of the body have, the same velocity., Consider now the rolling motion of a solid, metallic or wooden cylinder down the same, inclined plane (Fig. 7.2). The rigid body in this, problem, namely the cylinder, shifts from the, top to the bottom of the inclined plane, and thus,, seems to have translational motion. But as Fig., 7.2 shows, all its particles are not moving with, the same velocity at any instant. The body,, therefore, is not in pure translational motion., Its motion is translational plus ‘something else.’, , Fig. 7.2 Rolling motion of a cylinder. It is not pure, translational motion. Points P1, P2, P3 and P4, have different velocities (shown by arrows), at any instant of time. In fact, the velocity of, the point of contact P3 is zero at any instant,, if the cylinder rolls without slipping., , In order to understand what this ‘something, else’ is, let us take a rigid body so constrained, that it cannot have translational motion. The, , 2018-19, , most common way to constrain a rigid body so, that it does not have translational motion is to, fix it along a straight line. The only possible, motion of such a rigid body is rotation. The line, or fixed axis about which the body is rotating is, its axis of rotation. If you look around, you will, come across many examples of rotation about, an axis, a ceiling fan, a potter’s wheel, a giant, wheel in a fair, a merry-go-round and so on (Fig, 7.3(a) and (b))., , (a), , (b), Fig. 7.3 Rotation about a fixed axis, (a) A ceiling fan, (b) A potter’s wheel., , Let us try to understand what rotation is,, what characterises rotation. You may notice that, in rotation of a rigid body about a fixed axis,

Page 143 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , 143, , Fig. 7.5 (a) A spinning top, (The point of contact of the top with the, ground, its tip O, is fixed.), , Axis of oscillation, , Fig. 7.4, , A rigid body rotation about the z-axis (Each, point of the body such as P 1 or, P2 describes a circle with its centre (C1, or C2) on the axis of rotation. The radius of, the circle (r1or r 2 ) is the perpendicular, distance of the point (P1 or P2 ) from the, axis. A point on the axis like P3 remains, stationary)., , every particle of the body moves in a circle,, which lies in a plane perpendicular to the axis, and has its centre on the axis. Fig. 7.4 shows, the rotational motion of a rigid body about a fixed, axis (the z-axis of the frame of reference). Let P1, be a particle of the rigid body, arbitrarily chosen, and at a distance r1 from fixed axis. The particle, P1 describes a circle of radius r1 with its centre, C1 on the fixed axis. The circle lies in a plane, perpendicular to the axis. The figure also shows, another particle P2 of the rigid body, P2 is at a, distance r2 from the fixed axis. The particle P2, moves in a circle of radius r2 and with centre C2, on the axis. This circle, too, lies in a plane, perpendicular to the axis. Note that the circles, described by P1 and P2 may lie in different planes;, both these planes, however, are perpendicular, to the fixed axis. For any particle on the axis, like P 3 , r = 0. Any such particle remains, stationary while the body rotates. This is, expected since the axis of rotation is fixed., , Axis of, rotation, from blades, , Fig. 7.5 (b) An oscillating table fan with rotating, blades. The pivot of the fan, point O, is, fixed. The blades of the fan are under, rotational motion, whereas, the axis of, rotation of the fan blades is oscillating., , In some examples of rotation, however, the, axis may not be fixed. A prominent example of, this kind of rotation is a top spinning in place, [Fig. 7.5(a)]. (We assume that the top does not, slip from place to place and so does not have, translational motion.) We know from experience, that the axis of such a spinning top moves, around the vertical through its point of contact, with the ground, sweeping out a cone as shown, in Fig. 7.5(a). (This movement of the axis of the, top around the vertical is termed precession.), Note, the point of contact of the top with, ground is fixed. The axis of rotation of the top, at any instant passes through the point of, contact. Another simple example of this kind of, rotation is the oscillating table fan or a pedestal, fan [Fig.7.5(b)]. You may have observed that the, , 2018-19

Page 144 :
144, , PHYSICS, , axis of rotation of such a fan has an oscillating, (sidewise) movement in a horizontal plane about, the vertical through the point at which the axis, is pivoted (point O in Fig. 7.5(b))., While the fan rotates and its axis moves, sidewise, this point is fixed. Thus, in more, general cases of rotation, such as the rotation, of a top or a pedestal fan, one point and not, one line, of the rigid body is fixed. In this case, the axis is not fixed, though it always passes, through the fixed point. In our study, however,, we mostly deal with the simpler and special case, of rotation in which one line (i.e. the axis) is fixed., , Fig. 7.6(a), , Motion of a rigid body which is pure, translation., , Thus, for us rotation will be about a fixed axis, only unless stated otherwise., The rolling motion of a cylinder down an, inclined plane is a combination of rotation about, a fixed axis and translation. Thus, the, ‘something else’ in the case of rolling motion, which we referred to earlier is rotational motion., You will find Fig. 7.6(a) and (b) instructive from, this point of view. Both these figures show, motion of the same body along identical, translational trajectory. In one case, Fig. 7.6(a),, the motion is a pure translation; in the other, case [Fig. 7.6(b)] it is a combination of, translation and rotation. (You may try to, reproduce the two types of motion shown, using, a rigid object like a heavy book.), We now recapitulate the most important, observations of the present section: The motion, of a rigid body which is not pivoted or fixed in, some way is either a pure translation or a, combination of translation and rotation. The, motion of a rigid body which is pivoted or fixed, in some way is rotation. The rotation may be, about an axis that is fixed (e.g. a ceiling fan) or, moving (e.g. an oscillating table fan [Fig.7.5(b)])., We shall, in the present chapter, consider, rotational motion about a fixed axis only., 7.2 CENTRE OF MASS, , Fig. 7.6(b) Motion of a rigid body which is a, combination of translation and, rotation., Fig 7.6 (a) and 7.6 (b) illustrate different motions of, the same body. Note P is an arbitrary point of the, body; O is the centre of mass of the body, which is, defined in the next section. Suffice to say here that, the trajectories of O are the translational trajectories, Tr1 and Tr2 of the body. The positions O and P at, three different instants of time are shown by O1, O2,, and O3, and P 1, P2 and P3 , respectively, in both, Figs. 7.6 (a) and (b) . As seen from Fig. 7.6(a), at any, instant the velocities of any particles like O and P of, the body are the same in pure translation. Notice, in, this case the orientation of OP, i.e. the angle OP makes, with a fixed direction, say the horizontal, remains, the same, i.e. α1 = α2 = α3. Fig. 7.6 (b) illustrates a, case of combination of translation and rotation. In, this case, at any instants the velocities of O and P, differ. Also, α1, α2 and α3 may all be different., , 2018-19, , We shall first see what the centre of mass of a, system of particles is and then discuss its, significance. For simplicity we shall start with, a two particle system. We shall take the line, joining the two particles to be the x- axis., , Fig. 7.7, , Let the distances of the two particles be x1, and x2 respectively from some origin O. Let m1, and m2 be respectively the masses of the two

Page 145 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , particles. The centre of mass of the system is, that point C which is at a distance X from O,, where X is given by, , X =, , m 1 x1 + m 2 x 2, m1 + m 2, , (7.1), , In Eq. (7.1), X can be regarded as the massweighted mean of x1 and x2. If the two particles, have the same mass m1 = m2 = m, then, mx 1 + mx 2 x 1 + x 2, =, 2m, 2, Thus, for two particles of equal mass the, centre of mass lies exactly midway between, them., If we have n particles of masses m1, m2,, ...mn respectively, along a straight line taken as, the x- axis, then by definition the position of the, centre of the mass of the system of particles is, given by., X =, , m x + m 2 x 2 + ... + m n x n, X= 1 1, =, m1 + m 2 +... + m n, , mi x i, , i= 1, n, , ∑, , =, mi, , ∑ mx, ∑m, i, , i, , (7.2), , i, , i= 1, , where x1, x2,...xn are the distances of the, particles from the origin; X is also measured from, the same origin. The symbol, , ∑, , (the Greek letter, , sigma) denotes summation, in this case over n, particles. The sum, , ∑ mi, , =M, , X =, Y =, , ∑mi xi, ∑ m i yi, , (7.4b), , M, , ∑ m i zi, , (7.4c), , M, , ∑mi, , is the total mass of the, , system. The index i runs from 1 to n; mi is the, mass of the ith particle and the position of the, ith particle is given by (xi, yi, zi)., Eqs. (7.4a), (7.4b) and (7.4c) can be, combined into one equation using the notation, of position vectors. Let ri be the position vector, of the ith particle and R be the position vector of, the centre of mass:,
, r = x i + y j + z k, i, , i, , i, ,
, and R = X i + Y j + Z k, Then R =, , ∑ m i ri, , (7.4d), M, The sum on the right hand side is a vector, sum., Note the economy of expressions we achieve, by use of vectors. If the origin of the frame of, reference (the coordinate system) is chosen to, be the centre of mass then, , X =, , m 1x 1 + m 2 x 2 + m 3 x 3, m1 + m 2 + m 3, , (7.3a), , Y =, , m 1y1 + m 2y2 + m 3y3, m1 + m 2 + m 3, , (7.3b), , For the particles of equal mass m = m1 = m2, = m3,, m (x1 + x 2 + x 3 ) x1 + x 2 + x 3, =, 3m, 3, , (7.4a), , M, , and Z =, , i, , is the total mass of the system., Suppose that we have three particles, not, lying in a straight line. We may define x– and y–, axes in the plane in which the particles lie and, represent the positions of the three particles by, coordinates (x1,y1), (x2,y2) and (x3,y3) respectively., Let the masses of the three particles be m1, m2, and m3 respectively. The centre of mass C of, the system of the three particles is defined and, located by the coordinates (X, Y) given by, , X =, , m (y1 + y 2 + y 3 ) y1 + y 2 + y 3, =, 3m, 3, Thus, for three particles of equal mass, the, centre of mass coincides with the centroid of the, triangle formed by the particles., Results of Eqs. (7.3a) and (7.3b) are, generalised easily to a system of n particles, not, necessarily lying in a plane, but distributed in, space. The centre of mass of such a system is, at (X, Y, Z ), where, Y =, , Here M =, , n, , ∑, , 145, , ∑ mi ri, , = 0 for the, , given system of particles., A rigid body, such as a metre stick or a, flywheel, is a system of closely packed particles;, Eqs. (7.4a), (7.4b), (7.4c) and (7.4d) are, therefore, applicable to a rigid body. The number, of particles (atoms or molecules) in such a body, is so large that it is impossible to carry out the, summations over individual particles in these, equations. Since the spacing of the particles is, , 2018-19

Page 146 :
146, , PHYSICS, , small, we can treat the body as a continuous, distribution of mass. We subdivide the body into, n small elements of mass; ∆m1, ∆m2... ∆mn; the, ith element ∆mi is taken to be located about the, point (xi, yi, zi). The coordinates of the centre of, mass are then approximately given by, X =, , ∑ (∆m i )x i , Y = ∑ (∆m i )yi , Z = ∑ (∆m i )zi, ∑ ∆m i, ∑ ∆m i, ∑ ∆m i, , As we make n bigger and bigger and each, ∆m i smaller and smaller, these expressions, become exact. In that case, we denote the sums, over i by integrals. Thus,, , ∑ ∆m i → ∫ dm = M ,, , ∑ ( ∆m i )x i → ∫ x dm ,, ∑ ( ∆m i )yi → ∫ y dm ,, and, , ∑ (∆m i )zi → ∫ z dm, , Here M is the total mass of the body. The, coordinates of the centre of mass now are, X=, , 1, 1, x dm , Y =, ∫, M, M, , 1, , ∫ y dm and Z = M ∫ z dm, , (7.5a), , The vector expression equivalent to these, three scalar expressions is, , 1, r dm, (7.5b), M∫, If we choose, the centre of mass as the origin, of our coordinate system,, R=, , R= 0, i.e., ∫ r dm = 0, or, , ∫ x dm = ∫ y dm = ∫ z dm = 0, , (7.6), , Often we have to calculate the centre of mass, of homogeneous bodies of regular shapes like, rings, discs, spheres, rods etc. (By a, homogeneous body we mean a body with, uniformly distributed mass.) By using symmetry, consideration, we can easily show that the, centres of mass of these bodies lie at their, geometric centres., , Fig. 7.8 Determining the CM of a thin rod., , 2018-19, , Let us consider a thin rod, whose width and, breath (in case the cross section of the rod is, rectangular) or radius (in case the cross section, of the rod is cylindrical) is much smaller than, its length. Taking the origin to be at the, geometric centre of the rod and x-axis to be, along the length of the rod, we can say that on, account of reflection symmetry, for every, element dm of the rod at x, there is an element, of the same mass dm located at –x (Fig. 7.8)., The net contribution of every such pair to, itself, the integral and hence the integral, is zero. From Eq. (7.6), the point for which the, integral itself is zero, is the centre of mass., Thus, the centre of mass of a homogenous thin, rod coincides with its geometric centre. This can, be understood on the basis of reflection symmetry., The same symmetry argument will apply to, homogeneous rings, discs, spheres, or even, thick rods of circular or rectangular cross, section. For all such bodies you will realise that, for every element dm at a point (x, y, z ) one can, always take an element of the same mass at, the point (–x, –y, –z ). (In other words, the origin, is a point of reflection symmetry for these, bodies.) As a result, the integrals in Eq. (7.5 a), all are zero. This means that for all the above, bodies, their centre of mass coincides with their, geometric centre., u Example 7.1 Find the centre of mass of, three particles at the vertices of an, equilateral triangle. The masses of the, particles are 100g, 150g, and 200g, respectively. Each side of the equilateral, triangle is 0.5m long., Answer, , Fig. 7.9

Page 147 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , 147, , With the x – and y–axes chosen as shown in Fig., 7.9, the coordinates of points O, A and B forming, the equilateral triangle are respectively (0,0),, , concurrence of the medians, i.e. on the centroid, G of the triangle., t, , (0.5,0), (0.25,0.25 3 ). Let the masses 100 g,, 150g and 200g be located at O, A and B be, respectively. Then,, , u Example 7.3 Find the centre of mass of a, uniform L-shaped lamina (a thin flat plate), with dimensions as shown. The mass of, the lamina is 3 kg., , X =, , =, , m 1x 1 + m 2 x 2 + m 3 x 3, m1 + m 2 + m 3, , 100 (0 ) + 150(0.5) + 200(0.25), , gm, , (100 + 150 + 200) g, , =, , Y =, , 75 + 50, 125, 5, m=, m=, m, 450, 450, 18, , 100(0) + 150(0) + 200(0.25 3), , gm, , 450 g, , 50 3, 3, 1, m=, m=, m, 450, 9, 3 3, The centre of mass C is shown in the figure., Note that it is not the geometric centre of the, triangle OAB. Why?, t, =, , Answer Choosing the X and Y axes as shown, in Fig. 7.11 we have the coordinates of the, vertices of the L-shaped lamina as given in the, figure., We, can, think, of, the, L-shape to consist of 3 squares each of length, 1m. The mass of each square is 1kg, since the, lamina is uniform. The centres of mass C1, C2, and C3 of the squares are, by symmetry, their, geometric centres and have coordinates (1/2,1/2),, (3/2,1/2), (1/2,3/2) respectively. We take the, masses of the squares to be concentrated at, these points. The centre of mass of the whole, L shape (X, Y) is the centre of mass of these, mass points., , u Example 7.2 Find the centre of mass of a, triangular lamina., Answer The lamina (∆LMN ) may be subdivided, into narrow strips each parallel to the base (MN), as shown in Fig. 7.10, , Fig. 7.11, , Hence, , Fig. 7.10, , By symmetry each strip has its centre of, mass at its midpoint. If we join the midpoint of, all the strips we get the median LP. The centre, of mass of the triangle as a whole therefore, has, to lie on the median LP. Similarly, we can argue, that it lies on the median MQ and NR. This, means the centre of mass lies on the point of, , X =, , Y =, , [1(1/ 2) + 1(3 / 2) + 1(1/2)] kg m, (1 + 1 + 1) kg, , [1(1/2) + 1(1/2) + 1(3 / 2)], (1 + 1 + 1) kg, , =, , kg m, , 5, m, 6, , =, , 5, m, 6, , The centre of mass of the L-shape lies on, the line OD. We could have guessed this without, calculations. Can you tell why? Suppose, the, three squares that make up the L shaped lamina, , 2018-19

Page 148 :
148, , PHYSICS, , of Fig. 7.11 had different masses. How will you, then determine the centre of mass of the lamina?, t, , Thus, the total mass of a system of particles, times the acceleration of its centre of mass is, the vector sum of all the forces acting on the, system of particles., , 7.3 MOTION OF CENTRE OF MASS, , Note when we talk of the force F1 on the first, particle, it is not a single force, but the vector, sum of all the forces on the first particle; likewise, for the second particle etc. Among these forces, on each particle there will be external forces, exerted by bodies outside the system and also, internal forces exerted by the particles on one, another. We know from Newton’s third law that, these internal forces occur in equal and opposite, pairs and in the sum of forces of Eq. (7.10),, their contribution is zero. Only the external, forces contribute to the equation. We can then, rewrite Eq. (7.10) as, , Equipped with the definition of the centre of, mass, we are now in a position to discuss its, physical importance for a system of n particles., We may rewrite Eq.(7.4d) as, , MR = ∑ m i ri = m1r1 + m 2 r2 + ... + m n rn, , (7.7), , Differentiating the two sides of the equation, with respect to time we get, , M, , dr, dr, dr, dR, = m1 1 + m 2 2 + ... + m n n, dt, dt, dt, dt, , or, , M V = m1 v1 + m 2 v 2 + ... + m n vn, , (7.8), , where v1 ( = dr1 /dt ) is the velocity of the first, particle v 2 ( = dr 2 dt ) is the velocity of the, second particle etc. and V = dR / dt is the, velocity of the centre of mass. Note that we, assumed the masses m 1, m 2, ... etc. do not, change in time. We have therefore, treated them, as constants in differentiating the equations, with respect to time., Differentiating Eq.(7.8) with respect to time,, we obtain, , M, , dv1, dv 2, dv n, dV, = m1, + m2, + ... + m n, dt, dt, dt, dt, , or, MA = m 1a1 + m 2 a 2 + ... + m n an, , (7.9), , where a1 ( = dv1 /dt ) is the acceleration of the, first particle, a 2 ( = dv 2 / dt ) is the acceleration, of the second particle etc. and A (= d V / dt ) is, the acceleration of the centre of mass of the, system of particles., Now, from Newton’s second law, the force, acting on the first particle is given by F1 = m1a1 ., The force acting on the second particle is given, by F2 = m 2 a 2 and so on. Eq. (7.9) may be written, as, , MA = F1 + F2 + ... + Fn, , (7.10), , 2018-19, , MA = Fext, , (7.11), , where Fext represents the sum of all external, forces acting on the particles of the system., Eq. (7.11) states that the centre of mass, of a system of particles moves as if all the, mass of the system was concentrated at the, centre of mass and all the external forces, were applied at that point., Notice, to determine the motion of the centre, of mass no knowledge of internal forces of the, system of particles is required; for this purpose, we need to know only the external forces., To obtain Eq. (7.11) we did not need to, specify the nature of the system of particles., The system may be a collection of particles in, which there may be all kinds of internal, motions, or it may be a rigid body which has, either pure translational motion or a, combination of translational and rotational, motion. Whatever is the system and the motion, of its individual particles, the centre of mass, moves according to Eq. (7.11)., Instead of treating extended bodies as single, particles as we have done in earlier chapters,, we can now treat them as systems of particles., We can obtain the translational component of, their motion, i.e. the motion of the centre of mass, of the system, by taking the mass of the whole, system to be concentrated at the centre of mass, and all the external forces on the system to be, acting at the centre of mass., This is the procedure that we followed earlier, in analysing forces on bodies and solving

Page 149 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , problems without explicitly outlining and, justifying the procedure. We now realise that in, earlier studies we assumed, without saying so,, that rotational motion and/or internal motion, of the particles were either absent or negligible., We no longer need to do this. We have not only, found the justification of the procedure we, followed earlier; but we also have found how to, describe and separate the translational motion, of (1) a rigid body which may be rotating as, well, or (2) a system of particles with all kinds, of internal motion., , 149, , where F is the force on the particle. Let us, consider a system of n particles with masses m1,, m2,...mn respectively and velocities v1 , v 2 ,.......vn, respectively. The particles may be interacting, and have external forces acting on them. The, linear momentum of the first particle is m1v1 ,, of the second particle is m 2 v 2 and so on., For the system of n particles, the linear, momentum of the system is defined to be the, vector sum of all individual particles of the, system,, , P = p1 + p2 + ... + pn, , = m1 v1 + m 2 v 2 + ... + m n vn, (7.14), Comparing this with Eq. (7.8), P=MV, (7.15), Thus, the total momentum of a system, of particles is equal to the product of the, total mass of the system and the velocity of, its centre of mass. Differentiating Eq. (7.15), with respect to time,, Fig. 7.12, , The centre of mass of the fragments, of the projectile continues along the, same parabolic path which it would, have followed if there were no, explosion., , Figure 7.12 is a good illustration of Eq., (7.11). A projectile, following the usual parabolic, trajectory, explodes into fragments midway in, air. The forces leading to the explosion are, internal forces. They contribute nothing to the, motion of the centre of mass. The total external, force, namely, the force of gravity acting on the, body, is the same before and after the explosion., The centre of mass under the influence of the, external force continues, therefore, along the, same parabolic trajectory as it would have, followed if there were no explosion., 7.4 LINEAR MOMENTUM OF A SYSTEM OF, PARTICLES, Let us recall that the linear momentum of a, particle is defined as, p=mv, (7.12), Let us also recall that Newton’s second law, written in symbolic form for a single particle is, , F=, , dp, dt, , (7.13), , dP, dV, =M, = MA, (7.16), dt, dt, Comparing Eq.(7.16) and Eq. (7.11),, dP, = Fext, (7.17), dt, This is the statement of Newton’s second law, of motion extended to a system of particles., Suppose now, that the sum of external, forces acting on a system of particles is zero., Then from Eq.(7.17), dP, = 0 or P = Constant, (7.18a), dt, Thus, when the total external force acting, on a system of particles is zero, the total linear, momentum of the system is constant. This is, the law of conservation of the total linear, momentum of a system of particles. Because of, Eq. (7.15), this also means that when the, total external force on the system is zero, the velocity of the centre of mass remains, constant. (We assume throughout the, discussion on systems of particles in this, chapter that the total mass of the system, remains constant.), Note that on account of the internal forces,, i.e. the forces exerted by the particles on one, another, the individual particles may have, , 2018-19

Page 150 :
150, , PHYSICS, , complicated trajectories. Yet, if the total external, force acting on the system is zero, the centre of, mass moves with a constant velocity, i.e., moves, uniformly in a straight line like a free particle., The vector Eq. (7.18a) is equivalent to three, scalar equations,, Px = c1, Py = c2 and Pz = c3, (7.18 b), Here Px, Py and Pz are the components of the, total linear momentum vector P along the x–, y–, and z–axes respectively; c 1 , c 2 and c 3 are, constants., , (a), , (b), , Fig. 7.13 (a) A heavy nucleus radium (Ra) splits into, a lighter nucleus radon (Rn) and an alpha, particle (nucleus of helium atom). The CM, of the system is in uniform motion., (b) The same spliting of the heavy nucleus, radium (Ra) with the centre of mass at, rest. The two product particles fly back, to back., , As an example, let us consider the, radioactive decay of a moving unstable particle,, like the nucleus of radium. A radium nucleus, disintegrates into a nucleus of radon and an, alpha particle. The forces leading to the decay, are internal to the system and the external, forces on the system are negligible. So the total, linear momentum of the system is the same, before and after decay. The two particles, produced in the decay, the radon nucleus and, the alpha particle, move in different directions, in such a way that their centre of mass moves, along the same path along which the original, decaying radium nucleus was moving, [Fig. 7.13(a)]., If we observe the decay from the frame of, reference in which the centre of mass is at rest,, the motion of the particles involved in the decay, looks particularly simple; the product particles, , 2018-19, , (a), , (b), , Fig. 7.14 (a) Trajectories of two stars, S1 (dotted, line) and S 2 (solid line) forming a, binary system with their centre of, mass C in uniform motion., (b) The same binary system, with the, centre of mass C at rest., , move back to back with their centre of mass, remaining at rest as shown in Fig.7.13 (b)., In many problems on the system of, particles, as in the above radioactive decay, problem, it is convenient to work in the centre, of mass frame rather than in the laboratory, frame of reference., In astronomy, binary (double) stars is a, common occurrence. If there are no external, forces, the centre of mass of a double star, moves like a free particle, as shown in Fig.7.14, (a). The trajectories of the two stars of equal, mass are also shown in the figure; they look, complicated. If we go to the centre of mass, frame, then we find that there the two stars, are moving in a circle, about the centre of, mass, which is at rest. Note that the position, of the stars have to be diametrically opposite, to each other [Fig. 7.14(b)]. Thus in our frame, of reference, the trajectories of the stars are a, combination of (i) uniform motion in a straight, line of the centre of mass and (ii) circular, orbits of the stars about the centre of mass., As can be seen from the two examples,, separating the motion of different parts of a, system into motion of the centre of mass and, motion about the centre of mass is a very, useful technique that helps in understanding, the motion of the system., 7.5 VECTOR PRODUCT OF TWO VECTORS, We are already familiar with vectors and their, use in physics. In chapter 6 (Work, Energy,, Power) we defined the scalar product of two, vectors. An important physical quantity, work,, is defined as a scalar product of two vector, quantities, force and displacement.

Page 151 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , We shall now define another product of two, vectors. This product is a vector. Two important, quantities in the study of rotational motion,, namely, moment of a force and angular, momentum, are defined as vector products., Definition of Vector Product, A vector product of two vectors a and b is a, vector c such that, (i) magnitude of c = c = ab sin θ where a and b, are magnitudes of a and b and θ is the, angle between the two vectors., (ii) c is perpendicular to the plane containing, a and b., (iii) if we take a right handed screw with its head, lying in the plane of a and b and the screw, perpendicular to this plane, and if we turn, the head in the direction from a to b, then, the tip of the screw advances in the direction, of c. This right handed screw rule is, illustrated in Fig. 7.15a., Alternately, if one curls up the fingers of, right hand around a line perpendicular to the, plane of the vectors a and b and if the fingers, are curled up in the direction from a to b, then, the stretched thumb points in the direction of, c, as shown in Fig. 7.15b., , 151, , A simpler version of the right hand rule is, the following : Open up your right hand palm, and curl the fingers pointing from a to b. Your, stretched thumb points in the direction of c., It should be remembered that there are two, angles between any two vectors a and b . In, Fig. 7.15 (a) or (b) they correspond to θ (as, shown) and (3600– θ). While applying either of, the above rules, the rotation should be taken, through the smaller angle (<1800) between a, and b. It is θ here., Because of the cross (×) used to denote the, vector product, it is also referred to as cross product., • Note that scalar product of two vectors is, commutative as said earlier, a.b = b.a, The vector product, however, is not, commutative, i.e. a × b ≠ b × a, The magnitude of both a × b and b × a is the, same ( ab sin θ ); also, both of them are, perpendicular to the plane of a and b. But the, rotation of the right-handed screw in case of, a × b is from a to b, whereas in case of b × a it, is from b to a. This means the two vectors are, in opposite directions. We have, , •, , a × b = −b × a, Another interesting property of a vector, product is its behaviour under reflection., Under reflection (i.e. on taking the plane, mirror, image), we, have, , x → − x , y → −y and z → − z . As a result all, the components of a vector change sign and, thus a → −a , b → −b . What happens to, a × b under reflection?, a × b → ( −a ) × ( − b) = a × b, Thus, a × b does not change sign under, reflection., • Both scalar and vector products are, distributive with respect to vector addition., Thus,, , a.( b + c) = a.b + a.c, , a × ( b + c) = a × b + a × c, (a), , (b), , Fig. 7.15 (a) Rule of the right handed screw for, defining the direction of the vector, product of two vectors., (b) Rule of the right hand for defining the, direction of the vector product., , •, , We may write c = a × b in the component, form. For this we first need to obtain some, elementary cross products:, (i) a × a = 0 (0 is a null vector, i.e. a vector, with zero magnitude), This follows since magnitude of a × a is, , a 2 sin 0° = 0 ., , 2018-19

Page 152 :
152, , PHYSICS, , From this follow the results, , ˆi, , ˆ ×k, ˆ =0, (i) ˆi × ˆi = 0, ˆj × ˆj = 0, k, , a×b= 3, , ˆ, (ii) ˆi × ˆj = k, , −2, , Note that the magnitude of ˆi × ˆj is sin900, , ˆj, , ˆ, k, , −4, , ˆ, 5 = 7ˆi − ˆj − 5k, , 1, , −3, , ˆ, Note b × a = −7ˆi + ˆj + 5k, , t, , or 1, since, , î and ĵ both have unit, magnitude and the angle between them is 900., Thus, ˆi × ˆj is a unit vector. A unit vector, perpendicular to the plane of î and ĵ and, related to them by the right hand screw rule is, , k̂ . Hence, the above result. You may verify, similarly,, , ˆj × k, ˆ = ˆi and k, ˆ × ˆi = ˆj, From the rule for commutation of the cross, product, it follows:, ˆj × ˆi = − k, ˆ, k, ˆ × ˆj = −ˆi, ˆi × k, ˆ = − ˆj, , 7.6 ANGULAR VELOCITY AND ITS, RELATION WITH LINEAR VELOCITY, In this section we shall study what is angular, velocity and its role in rotational motion. We, have seen that every particle of a rotating body, moves in a circle. The linear velocity of the, particle is related to the angular velocity. The, relation between these two quantities involves, a vector product which we learnt about in the, last section., Let us go back to Fig. 7.4. As said above, in, rotational motion of a rigid body about a fixed, axis, every particle of the body moves in a circle,, , ˆ occur cyclically in the above, Note if ˆi, ˆj, k, vector product relation, the vector product is, ˆ do not occur in cyclic order,, positive. If ˆi, ˆj, k, the vector product is negative., Now,, ˆ ) × (b ˆi + b ˆj + b k, ˆ, a × b = (a x ˆi + a y ˆj + a z k, x, y, z ), ˆ − a b ˆj − a b k, ˆ + a b ˆi + a b ˆj − a b ˆi, = a x by k, x z, y x, y z, z x, z y, = (a yb z − a zby )i + (a zb x − a x b z ) j + (a x by − a yb x )k, , We have used the elementary cross products, in obtaining the above relation. The expression, for a × b can be put in a determinant form, which is easy to remember., , ˆi, , ˆj, , ˆ, k, , a × b = ax, , ay, , az, , bx, , by, , bz, , u Example 7.4 Find the scalar and vector, products of two vectors. a = (3î – 4ĵ + 5k̂ ), ˆ ), and b = (– 2î + ĵ – 3k, , Fig. 7.16 Rotation about a fixed axis. (A particle (P), of the rigid body rotating about the fixed, (z-) axis moves in a circle with centre (C), on the axis.), , Answer, , which lies in a plane perpendicular to the axis, and has its centre on the axis. In Fig. 7.16 we, redraw Fig. 7.4, showing a typical particle (at a, point P) of the rigid body rotating about a fixed, axis (taken as the z-axis). The particle describes, , ˆ )i( −2ˆi + ˆj − 3k, ˆ), a i b = (3ˆi − 4 ˆj + 5k, = −6 − 4 − 15, = −25, , 2018-19

Page 153 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , a circle with a centre C on the axis. The radius, of the circle is r, the perpendicular distance of, the point P from the axis. We also show the, linear velocity vector v of the particle at P. It is, along the tangent at P to the circle., Let P′ be the position of the particle after an, interval of time ∆t (Fig. 7.16). The angle PCP′, describes the angular displacement ∆θ of the, particle in time ∆t. The average angular velocity, of the particle over the interval ∆t is ∆θ/∆t. As, ∆t tends to zero (i.e. takes smaller and smaller, values), the ratio ∆θ/∆t approaches a limit which, is the instantaneous angular velocity dθ/dt of, the particle at the position P. We denote the, instantaneous angular velocity by ω (the, Greek letter omega). We know from our study, of circular motion that the magnitude of linear, velocity v of a particle moving in a circle is, related to the angular velocity of the particle ω, by the simple relation υ = ω r , where r is the, radius of the circle., We observe that at any given instant the, relation v = ω r applies to all particles of the, rigid body. Thus for a particle at a perpendicular, distance ri from the fixed axis, the linear velocity, at a given instant vi is given by, , vi = ω ri, (7.19), The index i runs from 1 to n, where n is the, total number of particles of the body., For particles on the axis, r = 0 , and hence, v = ω r = 0. Thus, particles on the axis are, stationary. This verifies that the axis is fixed., Note that we use the same angular velocity, ω for all the particles. We therefore, refer to ω, as the angular velocity of the whole body., We have characterised pure translation of, a body by all parts of the body having the same, velocity at any instant of time. Similarly, we, may characterise pure rotation by all parts of, the body having the same angular velocity at, any instant of time. Note that this, characterisation of the rotation of a rigid body, about a fixed axis is just another way of saying, as in Sec. 7.1 that each particle of the body moves, in a circle, which lies in a plane perpendicular, to the axis and has the centre on the axis., In our discussion so far the angular velocity, appears to be a scalar. In fact, it is a vector. We, shall not justify this fact, but we shall accept, it. For rotation about a fixed axis, the angular, velocity vector lies along the axis of rotation,, , 153, , and points out in the direction in which a right, handed screw would advance, if the head of the, screw is rotated with the body. (See Fig. 7.17a)., The magnitude of this vector is ω = dθ dt, referred as above., , Fig. 7.17 (a) If the head of a right handed screw, rotates with the body, the screw, advances in the direction of the angular, velocity ω. If the sense (clockwise or, anticlockwise) of rotation of the body, changes, so does the direction of ω., , Fig. 7.17 (b) The angular velocity vector ω is, directed along the fixed axis as shown., The linear velocity of the particle at P, is v = ω × r. It is perpendicular to both, ω and r and is directed along the, tangent to the circle described by the, particle., , We shall now look at what the vector product, ω × r corresponds to. Refer to Fig. 7.17(b) which, is a part of Fig. 7.16 reproduced to show the, path of the particle P. The figure shows the, vector ω directed along the fixed (z–) axis and, also the position vector r = OP of the particle, at P of the rigid body with respect to the origin, O. Note that the origin is chosen to be on the, axis of rotation., , 2018-19

Page 154 :
154, , PHYSICS, , Now, But, Hence, , ω × r = ω × OP = ω × (OC + CP), ω × OC = 0 as ω is along OC, ω × r = ω × CP, , The vector ω × CP is perpendicular to ω, i.e., to the z-axis and also to CP, the radius of the, circle described by the particle at P. It is, therefore, along the tangent to the circle at P., Also, the magnitude of ω × CP is ω (CP) since, ω and CP are perpendicular to each other. We, shall denote CP by r⊥ and not by r, as we did, earlier., Thus, ω × r is a vector of magnitude ω r⊥, and is along the tangent to the circle described, by the particle at P. The linear velocity vector v, at P has the same magnitude and direction., Thus,, v =ω × r, (7.20), In fact, the relation, Eq. (7.20), holds good, even for rotation of a rigid body with one point, fixed, such as the rotation of the top [Fig. 7.6(a)]., In this case r represents the position vector of, the particle with respect to the fixed point taken, as the origin., We note that for rotation about a fixed, axis, the direction of the vector ω does not, change with time. Its magnitude may,, however, change from instant to instant. For, the more general rotation, both the, magnitude and the direction of ω may change, from instant to instant., 7.6.1 Angular acceleration, You may have noticed that we are developing, the study of rotational motion along the lines, of the study of translational motion with which, we are already familiar. Analogous to the kinetic, variables of linear displacement (s) and velocity, (v) in translational motion, we have angular, θ ) and angular velocity (ω, displacement (θ, ω) in, rotational motion. It is then natural to define, in rotational motion the concept of angular, acceleration in analogy with linear acceleration, defined as the time rate of change of velocity in, translational motion. We define angular, acceleration α as the time rate of change of, angular velocity; Thus,, α=, , dω, dt, , (7.21), , 2018-19, , If the axis of rotation is fixed, the direction, of ω and hence, that of α is fixed. In this case, the vector equation reduces to a scalar equation, , α=, , dω, dt, , (7.22), , 7.7 TORQUE AND ANGULAR MOMENTUM, In this section, we shall acquaint ourselves with, two physical quantities (torque and angular, momentum) which are defined as vector products, of two vectors. These as we shall see, are, especially important in the discussion of motion, of systems of particles, particularly rigid bodies., 7.7.1 Moment of force (Torque), We have learnt that the motion of a rigid body,, in general, is a combination of rotation and, translation. If the body is fixed at a point or along, a line, it has only rotational motion. We know, that force is needed to change the translational, state of a body, i.e. to produce linear, acceleration. We may then ask, what is the, analogue of force in the case of rotational, motion? To look into the question in a concrete, situation let us take the example of opening or, closing of a door. A door is a rigid body which, can rotate about a fixed vertical axis passing, through the hinges. What makes the door, rotate? It is clear that unless a force is applied, the door does not rotate. But any force does not, do the job. A force applied to the hinge line, cannot produce any rotation at all, whereas a, force of given magnitude applied at right angles, to the door at its outer edge is most effective in, producing rotation. It is not the force alone, but, how and where the force is applied is important, in rotational motion., The rotational analogue of force in linear, motion is moment of force. It is also referred to, as torque or couple. (We shall use the words, moment of force and torque interchangeably.), We shall first define the moment of force for the, special case of a single particle. Later on we, shall extend the concept to systems of particles, including rigid bodies. We shall also relate it to, a change in the state of rotational motion, i.e. is, angular acceleration of a rigid body.

Page 155 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , 155, , of the line of action of F from the origin and, F⊥ ( = F sin θ ) is the component of F in the, direction perpendicular to r. Note that τ = 0 if, r = 0, F = 0 or θ = 00 or 1800 . Thus, the moment, of a force vanishes if either the magnitude of, the force is zero, or if the line of action of the, force passes through the origin., One may note that since r × F is a vector, product, properties of a vector product of two, vectors apply to it. If the direction of F is, reversed, the direction of the moment of force, is reversed. If directions of both r and F are, reversed, the direction of the moment of force, remains the same., 7.7.2 Angular momentum of a particle, , Fig. 7.18, , τ = r × F, τ is perpendicular to the plane, containing r and F, and its direction is, given by the right handed screw rule., , If a force acts on a single particle at a point, P whose position with respect to the origin O is, given by the position vector r (Fig. 7.18), the, moment of the force acting on the particle with, respect to the origin O is defined as the vector, product, τ=r×F, (7.23), The moment of force (or torque) is a vector, quantity. The symbol τ stands for the Greek, letter tau. The magnitude of τ is, τ = r F sinθ, (7.24a), where r is the magnitude of the position vector, r, i.e. the length OP, F is the magnitude of force, F and θ is the angle between r and F as, shown., Moment of force has dimensions M L2 T -2., Its dimensions are the same as those of work, or energy. It is, however, a very different physical, quantity than work. Moment of a force is a, vector, while work is a scalar. The SI unit of, moment of force is newton metre (N m). The, magnitude of the moment of force may be, written, , τ = (r sin θ )F = r⊥ F, , (7.24b), , or τ = r F sin θ = rF⊥, , (7.24c), , where r⊥ = r sinθ is the perpendicular distance, , Just as the moment of a force is the rotational, analogue of force in linear motion, the quantity, angular momentum is the rotational analogue, of linear momentum. We shall first define, angular momentum for the special case of a, single particle and look at its usefulness in the, context of single particle motion. We shall then, extend the definition of angular momentum to, systems of particles including rigid bodies., Like moment of a force, angular momentum, is also a vector product. It could also be referred, to as moment of (linear) momentum. From this, term one could guess how angular momentum, is defined., Consider a particle of mass m and linear, momentum p at a position r relative to the origin, O. The angular momentum l of the particle with, respect to the origin O is defined to be, l=r×p, (7.25a), The magnitude of the angular momentum, vector is, , l = r p sin θ, , (7.26a), where p is the magnitude of p and θ is the angle, between r and p. We may write, , l = r p ⊥ or r⊥ p, , (7.26b), , where r⊥ (= r sinθ) is the perpendicular distance, of the directional line of p from the origin and, , p ⊥ ( = p sin θ ) is the component of p in a direction, perpendicular to r. We expect the angular, momentum to be zero (l = 0), if the linear, momentum vanishes (p = 0), if the particle is at, the origin (r = 0), or if the directional line of p, passes through the origin θ = 00 or 1800., , 2018-19

Page 156 :
156, , PHYSICS, , The physical quantities, moment of a force, and angular momentum, have an important, relation between them. It is the rotational, analogue of the relation between force and linear, momentum. For deriving the relation in the, context of a single particle, we differentiate, l = r × p with respect to time,, , dl, d, =, (r × p), dt dt, Applying the product rule for differentiation, to the right hand side,, d, dr, dp, (r × p) =, ×p+r×, dt, dt, dt, Now, the velocity of the particle is v = dr/dt, and p = m v, , dr, × p = v × m v = 0,, dt, as the vector product of two parallel vectors, vanishes. Further, since dp / dt = F,, Because of this, , r×, , dp, = r×F= τ, dt, , Hence, , d, (r × p) = τ, dt, , dl, =τ, (7.27), dt, Thus, the time rate of change of the angular, momentum of a particle is equal to the torque, acting on it. This is the rotational analogue of, the equation F = dp/dt, which expresses, Newton’s second law for the translational motion, of a single particle., , or, , Torque and angular momentum for a system, of particles, To get the total angular momentum of a system, of particles about a given point we need to add, vectorially the angular momenta of individual, particles. Thus, for a system of n particles,, L = l1 + l2 + ... + ln =, , Take, a, bicycle rim, and extend, its axle on, both sides., Tie, two, s t r i n g s, at both ends, A and B,, as shown, in, the, adjoining, figure. Hold, both, the, Initially, After, s t r i n g s, together in, one hand such that the rim is vertical. If you, leave one string, the rim will tilt. Now keeping, the rim in vertical position with both the strings, in one hand, put the wheel in fast rotation, around the axle with the other hand. Then leave, one string, say B, from your hand, and observe, what happens., The rim keeps rotating in a vertical plane, and the plane of rotation turns around the, string A which you are holding. We say that the, axis of rotation of the rim or equivalently, its angular momentum precesses about the, string A., The rotating rim gives rise to an angular, momentum. Determine the direction of this, angular momentum. When you are holding the, rotating rim with string A, a torque is generated., (We leave it to you to find out how the torque is, generated and what its direction is.) The effect, of the torque on the angular momentum is to, make it precess around an axis perpendicular, to both the angular momentum and the torque., Verify all these statements., , particle has mass mi and velocity vi ) We may, write the total angular momentum of a system, of particles as, L = ∑ li = ∑ ri × pi, , n, , ∑l, , An experiment with the bicycle rim, , (7.25b), , i, , i, , i =1, , The angular momentum of the ith particle, is given by, li = ri × pi, where ri is the position vector of the ith particle, with respect to a given origin and p = (mivi) is, the linear momentum of the particle. (The, , 2018-19, , This is a generalisation of the definition of, angular momentum (Eq. 7.25a) for a single, particle to a system of particles., Using Eqs. (7.23) and (7.25b), we get, dL, d, =, dt, dt, , ( ∑ l ) = ∑ ddlt = ∑ τ, i, , i, , i, , i, , i, , (7.28a)

Page 157 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , where τ i is the torque acting on the ith particle;, , τ i = ri × Fi, The force Fi on the ith particle is the vector, sum of external forces Fiext acting on the particle, and the internal forces Fiint exerted on it by the, other particles of the system. We may therefore, separate the contribution of the external and, the internal forces to the total torque, τ=, , ∑ τ i = ∑ ri × Fi, i, , as, , i, , τ = τ ext + τ int ,, , where, and, , τ ext =, , ∑ ri × Fi ext, i, , τ int =, , ∑ ri × Fiint, i, , We shall assume not only Newton’s third law, of motion, i.e. the forces between any two particles, of the system are equal and opposite, but also that, these forces are directed along the line joining the, two particles. In this case the contribution of the, internal forces to the total torque on the system is, zero, since the torque resulting from each actionreaction pair of forces is zero. We thus have, τint =, 0 and therefore τ = τext., Since τ = ∑ τ i , it follows from Eq. (7.28a), that, dL, = τ ext, (7.28 b), dt, Thus, the time rate of the total angular, momentum of a system of particles about a, point (taken as the origin of our frame of, reference) is equal to the sum of the external, torques (i.e. the torques due to external forces), acting on the system taken about the same, point. Eq. (7.28 b) is the generalisation of the, single particle case of Eq. (7.23) to a system of, particles. Note that when we have only one, particle, there are no internal forces or torques., Eq.(7.28 b) is the rotational analogue of, dP, = Fext, (7.17), dt, Note that like Eq.(7.17), Eq.(7.28b) holds, good for any system of particles, whether it is a, rigid body or its individual particles have all, kinds of internal motion., , 157, , Conservation of angular momentum, If τ ext = 0, Eq. (7.28b) reduces to, , dL, =0, dt, or, L = constant., (7.29a), Thus, if the total external torque on a system, of particles is zero, then the total angular, momentum of the system is conserved, i.e., remains constant. Eq. (7.29a) is equivalent to, three scalar equations,, Lx = K1, Ly = K2 and Lz = K3, (7.29 b), Here K1, K2 and K3 are constants; Lx, Ly and, Lz are the components of the total angular, momentum vector L along the x,y and z axes, respectively. The statement that the total, angular momentum is conserved means that, each of these three components is conserved., Eq. (7.29a) is the rotational analogue of, Eq. (7.18a), i.e. the conservation law of the total, linear momentum for a system of particles., Like Eq. (7.18a), it has applications in many, practical situations. We shall look at a few of, the interesting applications later on in this, chapter., u Example 7.5 Find the torque of a force, 7î + 3ĵ – 5k̂ about the origin. The force, acts on a particle whose position vector is, î – ĵ + ˆk ., , ˆ, Answer Here r = ˆi − ˆj + k, ˆ., and F = 7ˆi + 3ˆj − 5k, We shall use the determinant rule to find the, torque τ = r × F, , ˆ, or τ = 2ˆi + 12 ˆj + 10k, , u Example 7.6 Show that the angular, momentum about any point of a single, particle moving with constant velocity, remains constant throughout the motion., , 2018-19, , t

Page 158 :
158, , PHYSICS, , Answer Let the particle with velocity v be at, point P at some instant t. We want to calculate, the angular momentum of the particle about an, arbitrary point O., , acceleration nor angular acceleration. This, means, (1) the total force, i.e. the vector sum of the, forces, on the rigid body is zero;, n, , F1 + F2 + ... + Fn =, , ∑F, , i, , =0, , (7.30a), , i =1, , (2), , If the total force on the body is zero, then, the total linear momentum of the body does, not change with time. Eq. (7.30a) gives the, condition for the translational equilibrium, of the body., The total torque, i.e. the vector sum of the, torques on the rigid body is zero,, n, , τ1 + τ 2 + ... + τ n =, , Fig 7.19, , The angular momentum is l = r × mv. Its, magnitude is mvr sinθ , where θ is the angle, between r and v as shown in Fig. 7.19. Although, the particle changes position with time, the line, of direction of v remains the same and hence, OM = r sin θ. is a constant., Further, the direction of l is perpendicular, to the plane of r and v. It is into the page of the, figure.This direction does not change with time., Thus, l remains the same in magnitude and, direction and is therefore conserved. Is there, any external torque on the particle?, t, 7.8 EQUILIBRIUM OF A RIGID BODY, We are now going to concentrate on the motion, of rigid bodies rather than on the motion of, general systems of particles., We shall recapitulate what effect the, external forces have on a rigid body. (Henceforth, we shall omit the adjective ‘external’ because, unless stated otherwise, we shall deal with only, external forces and torques.) The forces change, the translational state of the motion of the rigid, body, i.e. they change its total linear momentum, in accordance with Eq. (7.17). But this is not, the only effect the forces have. The total torque, on the body may not vanish. Such a torque, changes the rotational state of motion of the, rigid body, i.e. it changes the total angular, momentum of the body in accordance with Eq., (7.28 b)., A rigid body is said to be in mechanical, equilibrium, if both its linear momentum and, angular momentum are not changing with time,, or equivalently, the body has neither linear, , 2018-19, , ∑τ, , i, , =0, , (7.30b), , i =1, , If the total torque on the rigid body is zero,, the total angular momentum of the body does, not change with time. Eq. (7.30 b) gives the, condition for the rotational equilibrium of the, body., One may raise a question, whether the, rotational equilibrium condition [Eq. 7.30(b)], remains valid, if the origin with respect to which, the torques are taken is shifted. One can show, that if the translational equilibrium condition, [Eq. 7.30(a)] holds for a rigid body, then such a, shift of origin does not matter, i.e. the rotational, equilibrium condition is independent of the, location of the origin about which the torques, are taken. Example 7.7 gives a proof of this, result in a special case of a couple, i.e. two forces, acting on a rigid body in translational, equilibrium. The generalisation of this result to, n forces is left as an exercise., Eq. (7.30a) and Eq. (7.30b), both, are vector, equations. They are equivalent to three scalar, equations each. Eq. (7.30a) corresponds to, n, , ∑ Fix, i =1, , =0,, , n, , ∑ Fiy = 0, i =1, , n, , and, , ∑ Fiz = 0, i =1, , (7.31a), , where Fix, Fiy and Fiz are respectively the x, y, and z components of the forces Fi. Similarly,, Eq. (7.30b) is equivalent to three scalar, equations, n, , ∑ τix, i =1, , = 0,, , n, , ∑ τiy = 0, i =1, , n, , and, , ∑ τiz, i =1, , = 0 (7.31b), , where τix, τiy and τiz are respectively the x, y and, z components of the torque τ i .

Page 159 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , Eq. (7.31a) and (7.31b) give six independent, conditions to be satisfied for mechanical, equilibrium of a rigid body. In a number of, problems all the forces acting on the body are, coplanar. Then we need only three conditions, to be satisfied for mechanical equilibrium. Two, of these conditions correspond to translational, equilibrium; the sum of the components of the, forces along any two perpendicular axes in the, plane must be zero. The third condition, corresponds to rotational equilibrium. The sum, of the components of the torques along any axis, perpendicular to the plane of the forces must, be zero., The conditions of equilibrium of a rigid body, may be compared with those for a particle,, which we considered in earlier chapters. Since, consideration of rotational motion does not, apply to a particle, only the conditions for, translational equilibrium (Eq. 7.30 a) apply to, a particle. Thus, for equilibrium of a particle, the vector sum of all the forces on it must be, zero. Since all these forces act on the single, particle, they must be concurrent. Equilibrium, under concurrent forces was discussed in the, earlier chapters., A body may be in partial equilibrium, i.e., it, may be in translational equilibrium and not in, rotational equilibrium, or it may be in rotational, equilibrium and not in translational, equilibrium., Consider a light (i.e. of negligible mass) rod, (AB) as shown in Fig. 7.20(a). At the two ends (A, and B) of which two parallel forces, both equal, in magnitude and acting along same direction, are applied perpendicular to the rod., , 159, , Fig. 7.20 (b), , The force at B in Fig. 7.20(a) is reversed in, Fig. 7.20(b). Thus, we have the same rod with, two forces of equal magnitude but acting in, opposite diretions applied perpendicular to the, rod, one at end A and the other at end B. Here, the moments of both the forces are equal, but, they are not opposite; they act in the same sense, and cause anticlockwise rotation of the rod. The, total force on the body is zero; so the body is in, translational equilibrium; but it is not in, rotational equilibrium. Although the rod is not, fixed in any way, it undergoes pure rotation (i.e., rotation without translation)., A pair of forces of equal magnitude but acting, in opposite directions with different lines of, action is known as a couple or torque. A couple, produces rotation without translation., When we open the lid of a bottle by turning, it, our fingers are applying a couple to the lid, [Fig. 7.21(a)]. Another known example is a, compass needle in the earth’s magnetic field as, shown in the Fig. 7.21(b). The earth’s magnetic, field exerts equal forces on the north and south, poles. The force on the North Pole is towards, the north, and the force on the South Pole is, toward the south. Except when the needle points, in the north-south direction; the two forces do, not have the same line of action. Thus there is, a couple acting on the needle due to the earth’s, magnetic field., , Fig. 7.20 (a), , Let C be the midpoint of AB, CA = CB = a., the moment of the forces at A and B will both, be equal in magnitude (aF ), but opposite in, sense as shown. The net moment on the rod will, be zero. The system will be in rotational, equilibrium, but it will not be in translational, equilibrium;, , ∑F ≠ 0, , Fig. 7.21(a) Our fingers apply a couple to turn, the lid., , 2018-19

Page 160 :
160, , PHYSICS, , length. This point is called the fulcrum. A seesaw on the children’s playground is a typical, example of a lever. Two forces F1 and F2, parallel, to each other and usually perpendicular to the, lever, as shown here, act on the lever at, distances d 1 and d 2 respectively from the, fulcrum as shown in Fig. 7.23., , Fig. 7.21(b) The Earth’s magnetic field exerts equal, and opposite forces on the poles of a, compass needle. These two forces form, a couple., , u Example 7.7 Show that moment of a, couple does not depend on the point about, which you take the moments., , Fig. 7.23, , The lever is a system in mechanical, equilibrium. Let R be the reaction of the support, at the fulcrum; R is directed opposite to the, forces F1 and F2. For translational equilibrium,, R – F1 – F2 = 0, , Answer, , Fig. 7.22, , Consider a couple as shown in Fig. 7.22, acting on a rigid body. The forces F and -F act, respectively at points B and A. These points have, position vectors r1 and r2 with respect to origin, O. Let us take the moments of the forces about, the origin., The moment of the couple = sum of the, moments of the two forces making the couple, = r1 × (–F) + r2 × F, = r2 × F – r1 × F, = (r2–r1) × F, But r1 + AB = r2, and hence AB = r2 – r1., The moment of the couple, therefore, is, AB × F., Clearly this is independent of the origin, the, point about which we took the moments of the, forces., t, 7.8.1 Principle of moments, An ideal lever is essentially a light (i.e. of, negligible mass) rod pivoted at a point along its, , 2018-19, , (i), , For considering rotational equilibrium we, take the moments about the fulcrum; the sum, of moments must be zero,, d1F1 – d2F2 = 0, (ii), Normally the anticlockwise (clockwise), moments are taken to be positive (negative). Note, R acts at the fulcrum itself and has zero moment, about the fulcrum., In the case of the lever force F1 is usually, some weight to be lifted. It is called the load, and its distance from the fulcrum d1 is called, the load arm. Force F2 is the effort applied to lift, the load; distance d 2 of the effort from the, fulcrum is the effort arm., Eq. (ii) can be written as, d 1F 1 = d 2 F 2, (7.32a), or load arm × load = effort arm × effort, The above equation expresses the principle, of moments for a lever. Incidentally the ratio, F1/F2 is called the Mechanical Advantage (M.A.);, , F1 d 2, M.A. = F = d, 2, 1, , (7.32b), , If the effort arm d2 is larger than the load, arm, the mechanical advantage is greater than, one. Mechanical advantage greater than one, means that a small effort can be used to lift a, large load. There are several examples of a lever, around you besides the see-saw. The beam of a, balance is a lever. Try to find more such

Page 161 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , examples and identify the fulcrum, the effort and, effort arm, and the load and the load arm of the, lever in each case., You may easily show that the principle of, moment holds even when the parallel forces F1, and F2 are not perpendicular, but act at some, angle, to the lever., 7.8.2 Centre of gravity, Many of you may have the experience of, balancing your notebook on the tip of a finger., Figure 7.24 illustrates a similar experiment that, you can easily perform. Take an irregularshaped cardboard having mass M and a narrow, tipped object like a pencil. You can locate by trial, and error a point G on the cardboard where it, can be balanced on the tip of the pencil. (The, cardboard remains horizontal in this position.), This point of balance is the centre of gravity (CG), of the cardboard. The tip of the pencil provides, a vertically upward force due to which the, cardboard is in mechanical equilibrium. As, shown in the Fig. 7.24, the reaction of the tip is, equal and opposite to Mg and hence the, cardboard is in translational equilibrium. It is, also in rotational equilibrium; if it were not so,, due to the unbalanced torque it would tilt and, fall. There are torques on the card board due to, the forces of gravity like m1g, m2g …. etc, acting, on the individual particles that make up the, cardboard., , Fig. 7.24, , Balancing a cardboard on the tip of a, pencil. The point of support, G, is the, centre of gravity., , 161, , The CG of the cardboard is so located that, the total torque on it due to the forces m1g, m2g, …. etc. is zero., If ri is the position vector of the ith particle, of an extended body with respect to its CG, then, the torque about the CG, due to the force of, gravity on the particle is τ i = ri × mi g. The total, gravitational torque about the CG is zero, i.e., τ g = ∑ τi =, , ∑r, , i, , × mi g = 0, , (7.33), , We may therefore, define the CG of a body, as that point where the total gravitational torque, on the body is zero., We notice that in Eq. (7.33), g is the same, for all particles, and hence it comes out of the, summation. This gives, since g is non-zero,, , ∑m r, , i i, , = 0. Remember that the position vectors, , (ri) are taken with respect to the CG. Now, in, accordance with the reasoning given below, Eq. (7.4a) in Sec. 7.2, if the sum is zero, the origin, must be the centre of mass of the body. Thus,, the centre of gravity of the body coincides with, the centre of mass in uniform gravity or gravityfree space. We note that this is true because, the body being small,, g does not, , Fig. 7.25 Determining the centre of gravity of a body, of irregular shape. The centre of gravity G, lies on the vertical AA1 through the point, of suspension of the body A., , 2018-19

Page 162 :
162, , PHYSICS, , vary from one point of the body to the other. If, the body is so extended that g varies from part, to part of the body, then the centre of gravity, and centre of mass will not coincide. Basically,, the two are different concepts. The centre of, mass has nothing to do with gravity. It depends, only on the distribution of mass of the body., In Sec. 7.2 we found out the position of the, centre of mass of several regular, homogeneous, objects. Obviously the method used there gives, us also the centre of gravity of these bodies, if, they are small enough., Figure 7.25 illustrates another way of, determining the CG of an irregular shaped body, like a cardboard. If you suspend the body from, some point like A, the vertical line through A, passes through the CG. We mark the vertical, AA1. We then suspend the body through other, points like B and C. The intersection of the, verticals gives the CG. Explain why the method, works. Since the body is small enough, the, method allows us to determine also its centre, of mass., u Example 7.8 A metal bar 70 cm long, and 4.00 kg in mass supported on two, knife-edges placed 10 cm from each end., A 6.00 kg load is suspended at 30 cm from, one end. Find the reactions at the knifeedges. (Assume the bar to be of uniform, cross section and homogeneous.), Answer, , 4.00 kg and W1= suspended load = 6.00 kg;, R 1 and R 2 are the normal reactions of the, support at the knife edges., For translational equilibrium of the rod,, R1+R2 –W1 –W = 0, (i), Note W1 and W act vertically down and R1, and R2 act vertically up., For considering rotational equilibrium, we, take moments of the forces. A convenient point, to take moments about is G. The moments of, R2 and W1 are anticlockwise (+ve), whereas the, moment of R1 is clockwise (-ve)., For rotational equilibrium,, –R1 (K1G) + W1 (PG) + R2 (K2G) = 0, (ii), It is given that W = 4.00g N and W1 = 6.00g, N, where g = acceleration due to gravity. We, take g = 9.8 m/s2., With numerical values inserted, from (i), R1 + R2 – 4.00g – 6.00g = 0, or R1 + R2 = 10.00g N, (iii), = 98.00 N, From (ii), – 0.25 R1 + 0.05 W1 + 0.25 R2 = 0, or R1 – R2 = 1.2g N = 11.76 N, (iv), From (iii) and (iv), R1 = 54.88 N,, R2 = 43.12 N, Thus the reactions of the support are about, 55 N at K1 and 43 N at K2., t, u Example 7.9 A 3m long ladder weighing, 20 kg leans on a frictionless wall. Its feet, rest on the floor 1 m from the wall as shown, in Fig.7.27. Find the reaction forces of the, wall and the floor., Answer, , Fig. 7.26, , Figure 7.26 shows the rod AB, the positions, of the knife edges K1 and K2 , the centre of, gravity of the rod at G and the suspended load, at P., Note the weight of the rod W acts at its, centre of gravity G. The rod is uniform in cross, section and homogeneous; hence G is at the, centre of the rod; AB = 70 cm. AG = 35 cm, AP, = 30 cm, PG = 5 cm, AK1= BK2 = 10 cm and K1G, = K2G = 25 cm. Also, W= weight of the rod =, , 2018-19, , Fig. 7.27, , The ladder AB is 3 m long, its foot A is at, distance AC = 1 m from the wall. From

Page 163 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , 163, , Pythagoras theorem, BC = 2 2 m. The forces, on the ladder are its weight W acting at its centre, of gravity D, reaction forces F1 and F2 of the wall, and the floor respectively. Force F 1 is, perpendicular to the wall, since the wall is, frictionless. Force F2 is resolved into two, components, the normal reaction N and the, force of friction F. Note that F prevents the ladder, from sliding away from the wall and is therefore, directed toward the wall., For translational equilibrium, taking the, forces in the vertical direction,, N–W=0, (i), Taking the forces in the horizontal direction,, F – F1 = 0, (ii), For rotational equilibrium, taking the, moments of the forces about A,, 2 2 F1 − (1/2) W = 0, , Now, From (i), , (iii), , linear velocity is υi = ri ω . The kinetic energy of, motion of this particle is, , 1, 1, m iυi2 = m i ri2ω 2, 2, 2, where mi is the mass of the particle. The total, kinetic energy K of the body is then given by, the sum of the kinetic energies of individual, particles,, ki =, , n, , 1 n, ∑ (m i ri2ω 2 ), 2, i =1, i =1, Here n is the number of particles in the body., Note ω is the same for all particles. Hence, taking, ω out of the sum,, n, 1, K = ω 2 ( ∑ m i ri2 ), 2, i =1, K = ∑ ki =, , We define a new parameter characterising, the rigid body, called the moment of inertia I ,, given by, n, , W = 20 g = 20 × 9.8 N = 196.0 N, N = 196.0 N, , I = ∑ m i ri2, i =1, , (7.34), , With this definition,, , From (iii) F1 = W 4 2 = 196.0 / 4 2 = 34.6 N, , 7.9 MOMENT OF INERTIA, , 1 2, Iω, (7.35), 2, Note that the parameter I is independent of, the magnitude of the angular velocity. It is a, characteristic of the rigid body and the axis, about which it rotates., Compare Eq. (7.35) for the kinetic energy of, a rotating body with the expression for the, kinetic energy of a body in linear (translational), motion,, , We have already mentioned that we are, developing the study of rotational motion, parallel to the study of translational motion with, which we are familiar. We have yet to answer, one major question in this connection. What is, the analogue of mass in rotational motion?, We shall attempt to answer this question in the, present section. To keep the discussion simple,, we shall consider rotation about a fixed axis, only. Let us try to get an expression for the, kinetic energy of a rotating body. We know, that for a body rotating about a fixed axis, each, particle of the body moves in a circle with linear, velocity given by Eq. (7.19). (Refer to Fig. 7.16)., For a particle at a distance from the axis, the, , 1, m υ2, 2, Here, m is the mass of the body and v is its, velocity. We have already noted the analogy, between angular velocity ω (in respect of rotational, motion about a fixed axis) and linear velocity v (in, respect of linear motion). It is then evident that, the parameter, moment of inertia I, is the desired, rotational analogue of mass in linear motion. In, rotation (about a fixed axis), the moment of inertia, plays a similar role as mass does in linear motion., We now apply the definition Eq. (7.34), to, calculate the moment of inertia in two simple, cases., (a) Consider a thin ring of radius R and mass, M, rotating in its own plane around its centre, , K=, , From (ii) F = F1 = 34.6 N, F2 = F 2 + N 2 = 199.0 N, , The force F2 makes an angle α with the, horizontal,, tan α = N F = 4 2 , α = tan −1(4 2) ≈ 80, , t, , K=, , 2018-19

Page 164 :
164, , PHYSICS, , with angular velocity ω. Each mass element, of the ring is at a distance R from the axis,, and moves with a speed Rω. The kinetic, energy is therefore,, , 1, 1, Mυ 2 = MR 2ω 2, 2, 2, Comparing with Eq. (7.35) we get I = MR 2, for the ring., K=, , with respect to the body as a whole. As a, measure of the way in which the mass of a, rotating rigid body is distributed with respect to, the axis of rotation, we can define a new, parameter, the radius of gyration. It is related, to the moment of inertia and the total mass of, the body., Notice from the Table 7.1 that in all, cases, we can write I = Mk 2, where k has, the dimension of length. For a rod, about, the perpendicular axis at its midpoint,, , k 2 = L2 12 , i.e. k = L, , Fig. 7.28 A light rod of length l with a pair of masses, rotating about an axis through the centre of, mass of the system and perpendicular to, the rod. The total mass of the system is M., , (b) Next, take a rigid rod of negligible mass of, length of length l with a pair of small masses,, rotating about an axis through the centre of, mass perpendicular to the rod (Fig. 7.28)., Each mass M/2 is at a distance l/2 from the, axis. The moment of inertia of the masses is, therefore given by, (M/2) (l/2)2 + (M/2)(l/2)2, Thus, for the pair of masses, rotating about, the axis through the centre of mass, perpendicular to the rod, I = Ml 2 / 4, Table 7.1 simply gives the moment of inertia of, various familiar regular shaped bodies about, specific axes. (The derivations of these, expressions are beyond the scope of this textbook, and you will study them in higher classes.), As the mass of a body resists a change in its, state of linear motion, it is a measure of its inertia, in linear motion. Similarly, as the moment of, inertia about a given axis of rotation resists a, change in its rotational motion, it can be, regarded as a measure of rotational inertia of, the body; it is a measure of the way in which, different parts of the body are distributed at, different distances from the axis. Unlike the, mass of a body, the moment of inertia is not a, fixed quantity but depends on distribution of, mass about the axis of rotation, and the, orientation and position of the axis of rotation, , 2018-19, , 12 . Similarly, k = R/2, , for the circular disc about its diameter. The, length k is a geometric property of the body and, axis of rotation. It is called the radius of, gyration. The radius of gyration of a body, about an axis may be defined as the distance, from the axis of a mass point whose mass is, equal to the mass of the whole body and whose, moment of inertia is equal to the moment of, inertia of the body about the axis., Thus, the moment of inertia of a rigid body, depends on the mass of the body, its shape and, size; distribution of mass about the axis of, rotation, and the position and orientation of the, axis of rotation., From the definition, Eq. (7.34), we can infer, that the dimensions of moments of inertia are, ML2 and its SI units are kg m2., The property of this extremely important, quantity I, as a measure of rotational inertia of, the body, has been put to a great practical use., The machines, such as steam engine and the, automobile engine, etc., that produce rotational, motion have a disc with a large moment of, inertia, called a flywheel. Because of its large, moment of inertia, the flywheel resists the, sudden increase or decrease of the speed of the, vehicle. It allows a gradual change in the speed, and prevents jerky motions, thereby ensuring, a smooth ride for the passengers on the vehicle., 7.10 THEOREMS OF PERPENDICULAR AND, PARALLEL AXES, These are two useful theorems relating to, moment of inertia. We shall first discuss the, theorem of perpendicular axes and its simple, yet instructive application in working out the, moments of inertia of some regular-shaped, bodies.

Page 165 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , 165, , Table 7.1 Moments of inertia of some regular shaped bodies about specific axes, , Body, , Axis, , (1), , Thin circular, ring, radius R, , Perpendicular to, plane, at centre, , M R2, , (2), , Thin circular, ring, radius R, , Diameter, , M R2/2, , (3), , Thin rod,, length L, , Perpendicular to, rod, at mid point, , M L2/12, , (4), , Circular disc,, radius R, , Perpendicular to, disc at centre, , M R2/2, , (5), , Circular disc,, radius R, , Diameter, , M R2/4, , (6), , Hollow cylinder,, radius R, , Axis of cylinder, , M R2, , (7), , Solid cylinder,, radius R, , Axis of cylinder, , M R2/2, , (8), , Solid sphere,, radius R, , Diameter, , 2 M R2/5, , Theorem of perpendicular axes, This theorem is applicable to bodies which are, planar. In practice this means the theorem, applies to flat bodies whose thickness is very, small compared to their other dimensions (e.g., length, breadth or radius). Fig. 7.29 illustrates, , Figure, , I, , Z, , the theorem. It states that the moment of, inertia of a planar body (lamina) about an axis, perpendicular to its plane is equal to the sum, of its moments of inertia about two, perpendicular axes concurrent with, perpendicular axis and lying in the plane of, the body., , 2018-19

Page 166 :
166, , PHYSICS, , Answer We assume the moment of inertia of, the disc about an axis perpendicular to it and, through its centre to be known; it is MR2/2,, where M is the mass of the disc and R is its, radius (Table 7.1), The disc can be considered to be a planar, body. Hence the theorem of perpendicular axes, is applicable to it. As shown in Fig. 7.30, we, take three concurrent axes through the centre, of the disc, O, as the x–, y– and z–axes; x– and, y–axes lie in the plane of the disc and z–axis is, perpendicular to it. By the theorem of, perpendicular axes,, Fig. 7.29, , Theorem of perpendicular axes, applicable to a planar body; x and y axes, are two perpendicular axes in the plane, and the z-axis is perpendicular to the, plane., , The figure shows a planar body. An axis, perpendicular to the body through a point O is, taken as the z-axis. Two mutually perpendicular, axes lying in the plane of the body and, concurrent with z-axis, i.e., passing through O,, are taken as the x and y-axes. The theorem, states that, Iz = Ix + Iy, , (7.36), Let us look at the usefulness of the theorem, through an example., , Iz = Ix + Iy, , Now, x and y axes are along two diameters, of the disc, and by symmetry the moment of, inertia of the disc is the same about any, diameter. Hence, Ix = Iy, and, Iz = 2Ix, But, Iz = MR2/2, So finally,, Ix = Iz/2 = MR2/4, Thus the moment of inertia of a disc about, any of its diameter is MR2/4 ., t, Find similarly the moment of inertia of a, ring about any of its diameters. Will the theorem, be applicable to a solid cylinder?, , u Example 7.10 What is the moment of, inertia of a disc about one of its diameters?, , Fig. 7.30 Moment of inertia of a disc about a, diameter, given its moment of inertia about, the perpendicular axis through its centre., , 2018-19, , Fig.7.31 The theorem of parallel axes The z and z′, axes are two parallel axes separated by a, distance a; O is the centre of mass of the, body, OO’ = a.

Page 167 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , 167, , 7.10.1 Theorem of parallel axes, This theorem is applicable to a body of any, shape. It allows to find the moment of inertia of, a body about any axis, given the moment of, inertia of the body about a parallel axis through, the centre of mass of the body. We shall only, state this theorem and not give its proof. We, shall, however, apply it to a few simple situations, which will be enough to convince us about the, usefulness of the theorem. The theorem may, be stated as follows:, The moment of inertia of a body about any, axis is equal to the sum of the moment of, inertia of the body about a parallel axis passing, through its centre of mass and the product of, its mass and the square of the distance, between the two parallel axes. As shown in, the Fig. 7.31, z and z′ are two parallel axes,, separated by a distance a. The z-axis passes, through the centre of mass O of the rigid body., Then according to the theorem of parallel axes, (7.37), Iz′ = Iz + Ma2, where Iz and Iz′ are the moments of inertia of the, body about the z and z′ axes respectively, M is the, total mass of the body and a is the perpendicular, distance between the two parallel axes., u Example 7.11 What is the moment of, inertia of a rod of mass M, length l about, an axis perpendicular to it through one, end?, Answer For the rod of mass M and length l,, I = Ml2/12. Using the parallel axes theorem,, I′ = I + Ma2 with a = l/2 we get,, 2, , I′ = M, , l2, Ml 2, l , +M  =, 12, 3, 2, , We can check this independently since I is, half the moment of inertia of a rod of mass 2M, and length 2l about its midpoint,, , I ′ = 2M ., , 4l 2 1 Ml 2, × =, 12 2, 3, , t, , u Example 7.12 What is the moment of, inertia of a ring about a tangent to the, circle of the ring?, , Answer, The tangent to the ring in the plane of the ring, is parallel to one of the diameters of the ring., , The distance between these two parallel axes is, R, the radius of the ring. Using the parallel axes, theorem,, , Fig. 7.32, , I tangent = I dia + MR 2 =, , MR 2, 3, + MR 2 = MR 2 ., 2, 2, , t, , 7.11 KINEMATICS OF ROTATIONAL MOTION, ABOUT A FIXED AXIS, We have already indicated the analogy between, rotational motion and translational motion. For, example, the angular velocity ω plays the same, role in rotation as the linear velocity v in, translation. We wish to take this analogy, further. In doing so we shall restrict the, discussion only to rotation about fixed axis. This, case of motion involves only one degree of, freedom, i.e., needs only one independent, variable to describe the motion. This in, translation corresponds to linear motion. This, section is limited only to kinematics. We shall, turn to dynamics in later sections., We recall that for specifying the angular, displacement of the rotating body we take any, particle like P (Fig.7.33) of the body. Its angular, displacement θ in the plane it moves is the, angular displacement of the whole body; θ is, measured from a fixed direction in the plane of, motion of P, which we take to be the x′-axis,, chosen parallel to the x-axis. Note, as shown,, the axis of rotation is the z – axis and the plane, of the motion of the particle is the x - y plane., Fig. 7.33 also shows θ 0 , the angular, displacement at t = 0., We also recall that the angular velocity is, the time rate of change of angular displacement,, ω = dθ/dt. Note since the axis of rotation is fixed,, , 2018-19

Page 168 :
168, , PHYSICS, , there is no need to treat angular velocity as a, vector. Further, the angular acceleration, α =, dω/dt., The kinematical quantities in rotational, motion, angular displacement ( θ ), angular, velocity ( ω ) and angular acceleration ( α ), respectively are analogous to kinematic, quantities in linear motion, displacement (x ),, velocity (v) and acceleration (a). We know the, kinematical equations of linear motion with, uniform (i.e. constant) acceleration:, v = v0 + at, (a), , 1, x = x 0 + υ0t + at 2, 2, , (b), , υ 2 = υ02 + 2ax, , (c), , where x0 = initial displacement and v0= initial, velocity. The word ‘initial’ refers to values of the, quantities at t = 0, The corresponding kinematic equations for, rotational motion with uniform angular, acceleration are:, , ω = ω0 + αt, θ = θ0 + ω 0t +, , (7.38), 1 2, αt, 2, , (7.39), , (7.40), and ω 2 = ω02 + 2α (θ – θ0 ), where θ0= initial angular displacement of the, rotating body, and ω0 = initial angular velocity, of the body., , u Example 7.13 Obtain Eq. (7.38) from first, principles., Answer, hence, , The angular acceleration is uniform,, , dω, = α = constant, dt, Integrating this equation,, , (i), , ω = ∫ α dt + c, = α t + c (as α is constant), At t = 0, ω = ω0 (given), From (i) we get at t = 0, ω = c = ω0, Thus, ω = αt + ω0 as required., With the definition of ω = dθ/dt we may, integrate Eq. (7.38) to get Eq. (7.39). This, derivation and the derivation of Eq. (7.40) is, left as an exercise., u Example 7.14 The angular speed of a, motor wheel is increased from 1200 rpm, to 3120 rpm in 16 seconds. (i) What is its, angular acceleration, assuming the, acceleration to be uniform? (ii) How many, revolutions does the engine make during, this time?, Answer, (i), We shall use ω = ω0 + αt, , ω0 = initial angular speed in rad/s, = 2π × angular speed in rev/s, =, , 2π × angular speed in rev/min, 60 s/min, , =, , 2π × 1200, rad/s, 60, , = 40π rad/s, Similarly ω = final angular speed in rad/s, =, , 2π × 3120, rad/s, 60, , = 2π × 52 rad/s, = 104 π rad/s, , ∴, Fig.7.33, , Specifying the angular position of a rigid, body., , 2018-19, , Angular acceleration, , α=, , ω − ω0, t, , = 4 π rad/s2

Page 169 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , 169, , The angular acceleration of the engine, = 4π rad/s2, (ii) The angular displacement in time t is, given by, , θ = ω0t +, , 1 2, αt, 2, , = (40π × 16 +, , 1, × 4π × 162 ) rad, 2, , = (640π + 512π ) rad, = 1152π rad, 1152π, = 576, Number of revolutions =, 2π, , (1) We need to consider only those forces that, lie in planes perpendicular to the axis., Forces which are parallel to the axis will, give torques perpendicular to the axis and, need not be taken into account., (2) We need to consider only those components, of the position vectors which are, perpendicular to the axis. Components of, position vectors along the axis will result in, torques perpendicular to the axis and need, not be taken into account., Work done by a torque, , t, , 7.12 DYNAMICS OF ROTATIONAL MOTION, ABOUT A FIXED AXIS, Table 7.2 lists quantities associated with linear, motion and their analogues in rotational motion., We have already compared kinematics of the, two motions. Also, we know that in rotational, motion moment of inertia and torque play the, same role as mass and force respectively in, linear motion. Given this we should be able to, guess what the other analogues indicated in the, table are. For example, we know that in linear, motion, work done is given by F dx, in rotational, motion about a fixed axis it should be τ dθ ,, since we already know the correspondence, d x → dθ and F → τ . It is, however, necessary, that these correspondences are established on, sound dynamical considerations. This is what, we now turn to., Before we begin, we note a simplification, that arises in the case of rotational motion, about a fixed axis. Since the axis is fixed, only, those components of torques, which are along, the direction of the fixed axis need to be, considered in our discussion. Only these, components can cause the body to rotate about, the axis. A component of the torque, perpendicular to the axis of rotation will tend, to turn the axis from its position. We specifically, assume that there will arise necessary forces of, constraint to cancel the effect of the, perpendicular components of the (external), torques, so that the fixed position of the axis, will be maintained. The perpendicular, components of the torques, therefore need not, be taken into account. This means that for our, calculation of torques on a rigid body:, , Fig. 7.34 Work done by a force F1 acting on a particle, of a body rotating about a fixed axis; the, particle describes a circular path with, centre C on the axis; arc P1P′1(ds1) gives, the displacement of the particle., , Figure 7.34 shows a cross-section of a rigid, body rotating about a fixed axis, which is taken, as the z-axis (perpendicular to the plane of the, page; see Fig. 7.33). As said above we need to, consider only those forces which lie in planes, perpendicular to the axis. Let F1 be one such, typical force acting as shown on a particle of, the body at point P1 with its line of action in a, plane perpendicular to the axis. For convenience, we call this to be the x′–y′ plane (coincident, with the plane of the page). The particle at P1, describes a circular path of radius r1 with centre, C on the axis; CP1 = r1., In time ∆t, the point moves to the position, P 1′ . The displacement of the particle ds 1 ,, therefore, has magnitude ds 1 = r 1d θ and, direction tangential at P1 to the circular path, as shown. Here dθ is the angular displacement, of the particle, dθ = ∠P1CP1′ .The work done by, the force on the particle is, dW1 = F1. ds1= F1ds1 cosφ1= F1(r1 dθ)sinα1, where φ1 is the angle between F1 and the tangent, , 2018-19

Page 170 :
170, , PHYSICS, , Table 7.2 Comparison of Translational and Rotational Motion, , Linear Motion, , Rotational Motion about a Fixed Axis, , 1, , Displacement x, , Angular displacement θ, , 2, , Velocity v = dx/dt, , Angular velocity ω = dθ/dt, , 3, , Acceleration a = dv/dt, , Angular acceleration α = dω/dt, , 4, , Mass M, , Moment of inertia I, , 5, , Force F = Ma, , Torque τ = I α, , 6, , Work dW = F ds, , Work W = τ dθ, , 7, , Kinetic energy K = Mv /2, , Kinetic energy K = Iω2/2, , 8, , Power P = F v, , Power P = τω, , 9, , Linear momentum p = Mv, , Angular momentum L = Iω, , 2, , at P1, and α1 is the angle between F1 and the, radius vector OP1; φ1 + α1 = 90°., The torque due to F1 about the origin is, OP 1 ×F 1. Now OP 1 = OC + OP 1 . [Refer to, Fig. 7.17(b).] Since OC is along the axis, the, torque resulting from it is excluded from our, consideration. The effective torque due to F1 is, τ1= CP×F1; it is directed along the axis of rotation, and has a magnitude τ1= r1F1 sinα , Therefore,, dW1 = τ1dθ, If there are more than one forces acting on, the body, the work done by all of them can be, added to give the total work done on the body., Denoting the magnitudes of the torques due to, the different forces as τ1, τ2, … etc,, dW = (τ1 + τ 2 + ...) dθ, , Remember, the forces giving rise to the, torques act on different particles, but the, angular displacement dθ is the same for all, particles. Since all the torques considered are, parallel to the fixed axis, the magnitude τ of the, total torque is just the algebraic sum of the, magnitudes of the torques, i.e., τ = τ1 + τ2 + ....., We, therefore, have, dW = τ dθ, , (7.41), , This expression gives the work done by the, total (external) torque τ which acts on the body, rotating about a fixed axis. Its similarity with, the corresponding expression, dW= F ds, for linear (translational) motion is obvious., , 2018-19, , Dividing both sides of Eq. (7.41) by dt gives, P =, , dW, dθ, =τ, = τω, dt, dt, , or P = τω, (7.42), This is the instantaneous power. Compare, this expression for power in the case of, rotational motion about a fixed axis with that of, power in the case of linear motion,, P = Fv, In a perfectly rigid body there is no internal, motion. The work done by external torques is, therefore, not dissipated and goes on to increase, the kinetic energy of the body. The rate at which, work is done on the body is given by Eq. (7.42)., This is to be equated to the rate at which kinetic, energy increases. The rate of increase of kinetic, energy is, , d  Iω2 , (2ω ) dω, =I, , , dt  2 , 2 dt, We assume that the moment of inertia does, not change with time. This means that the mass, of the body does not change, the body remains, rigid and also the axis does not change its, position with respect to the body., Since α = dω / dt , we get, d  Iω2 , =Iωα, dt  2 , , Equating rates of work done and of increase, in kinetic energy,, τω = I ω α

Page 171 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , (7.43), τ = Iα, Eq. (7.43) is similar to Newton’s second law, for linear motion expressed symbolically as, F = ma, Just as force produces acceleration, torque, produces angular acceleration in a body. The, angular acceleration is directly proportional to, the applied torque and is inversely proportional, to the moment of inertia of the body. In this, respect, Eq.(7.43) can be called Newton’s second, law for rotational motion about a fixed axis., u Example 7.15 A cord of negligible mass, is wound round the rim of a fly wheel of, mass 20 kg and radius 20 cm. A steady, pull of 25 N is applied on the cord as shown, in Fig. 7.35. The flywheel is mounted on a, horizontal axle with frictionless bearings., (a) Compute the angular acceleration of, the wheel., , 171, , I = Moment of inertia of flywheel about its, axis =, , MR 2, 2, , 20.0 × (0.2)2, = 0.4 kg m2, 2, α = angular acceleration, = 5.0 N m/0.4 kg m2 = 12.5 s–2, (b) Work done by the pull unwinding 2m of the, cord, = 25 N × 2m = 50 J, (c) Let ω be the final angular velocity. The, , =, , 1 2, Iω ,, 2, since the wheel starts from rest. Now,, , kinetic energy gained =, , ω 2 = ω02 + 2αθ , ω0 = 0, The angular displacement θ = length of, unwound string / radius of wheel, = 2m/0.2 m = 10 rad, , (b) Find the work done by the pull, when, 2m of the cord is unwound., , ω 2 = 2 × 12.5 × 10.0 = 250 (rad/s)2, , (c) Find also the kinetic energy of the, wheel at this point. Assume that the, wheel starts from rest., , ∴, , (d) Compare answers to parts (b) and (c)., Answer, , (d) The answers are the same, i.e. the kinetic energy, gained by the wheel = work done by the force., There is no loss of energy due to friction., t, 7.13 ANGULAR MOMENTUM IN CASE OF, ROTATION ABOUT A FIXED AXIS, We have studied in section 7.7, the angular, momentum of a system of particles. We already, know from there that the time rate of total, angular momentum of a system of particles, about a point is equal to the total external torque, on the system taken about the same point. When, the total external torque is zero, the total angular, momentum of the system is conserved., We now wish to study the angular momentum, in the special case of rotation about a fixed axis., The general expression for the total angular, momentum of the system of n particles is, L=, , N, , ∑ ri × pi, i =1, , Fig. 7.35, , (a) We use, the torque, , I, , α=τ, , τ=FR, = 25 × 0.20 Nm (as R = 0.20m), = 5.0 Nm, , (7.25b), , We first consider the angular momentum of, a typical particle of the rotating rigid body. We, then sum up the contributions of individual, particles to get L of the whole body., For a typical particle l = r×p. As seen in the, last section r = OP = OC + CP [Fig. 7.17(b)]. With, , 2018-19

Page 172 :
172, , PHYSICS, , p=mv,, l = ( OC × m v ) + ( CP × m v ), , The magnitude of the linear velocity v of the, particle at P is given by v = ωr⊥ where r⊥ is the, length of CP or the perpendicular distance of P, from the axis of rotation. Further, v is tangential, at P to the circle which the particle describes., Using the right-hand rule one can check that, CP × v is parallel to the fixed axis. The unit, vector along the fixed axis (chosen as the z-axis),  . Hence, is k, , CP × m v = r (mv ) k, ⊥, , = mr⊥2ω , k (since υ = ωr⊥ ), Similarly, we can check that OC × v is, perpendicular to the fixed axis. Let us denote, the part of l along the fixed axis (i.e. the z-axis), by lz, then, , l = CP × m v = mr 2ω k, ⊥, , z, , and l = lz + OC × m v, We note that lz is parallel to the fixed axis,, but l is not. In general, for a particle, the angular, momentum l is not along the axis of rotation,, i.e. for a particle, l and ω are not necessarily, parallel. Compare this with the corresponding, fact in translation. For a particle, p and v are, always parallel to each other., For computing the total angular momentum, of the whole rigid body, we add up the, contribution of each particle of the body., Thus, , L = ∑ li = ∑ liz + ∑ OCi × m i vi, , We denote by L ⊥ and L z the components, of L respectively perpendicular to the z-axis, and along the z-axis;, L ⊥ = ∑ OCi × m i vi, , (7.44a), , (7.44c), Note L = L z + L ⊥, The rigid bodies which we have mainly, considered in this chapter are symmetric about, the axis of rotation, i.e. the axis of rotation is, one of their symmetry axes. For such bodies,, for a given OCi, for every particle which has a, velocity vi , there is another particle of velocity, –vi located diametrically opposite on the circle, with centre Ci described by the particle. Together, such pairs will contribute zero to L ⊥ and as a, result for symmetric bodies L ⊥ is zero, and, hence, , (7.44d), L = Lz = Iω k, For bodies, which are not symmetric about, the axis of rotation, L is not equal to Lz and, hence L does not lie along the axis of rotation., Referring to Table 7.1, can you tell in which, cases L = Lz will not apply?,  is a, Let us differentiate Eq. (7.44b). Since k, fixed (constant) vector, we get, , d,  d, , L z ) =  ( I ω ) k, (,  dt, , dt, Now, Eq. (7.28b) states, dL, = τ, dt, As we have seen in the last section, only, those components of the external torques which, are along the axis of rotation, need to be taken, into account, when we discuss rotation about a, ., fixed axis. This means we can take τ = τ k, Since L = L z + L ⊥ and the direction of Lz (vector, ,  ) is fixed, it follows that for rotation about a, k, fixed axis,, , where mi and vi are respectively the mass and, the velocity of the ith particle and Ci is the centre, of the circle described by the particle;, and, , Lz =, , , , ∑ liz =  ∑ m iri2  ω k, i, , and, , , (7.44b), Lz = Iω k, The last step follows since the perpendicular, distance of the ith particle from the axis is ri;, and by definition the moment of inertia of the, , or, , body about the axis of rotation is I = ∑ m i ri2 ., , 2018-19, , dL z, , = τk, dt, , (7.45a), , dL ⊥, =0, dt, , (7.45b), , Thus, for rotation about a fixed axis, the, component, of, angular, momentum, perpendicular to the fixed axis is constant. As,  , we get from Eq. (7.45a),, L = Iωk, z, , d, (I ω ) = τ, dt, , (7.45c)

Page 173 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , If the moment of inertia I does not change with, time,, , d, dω, = Iα, (I ω ) = I, dt, dt, and we get from Eq. (7.45c),, (7.43), τ = Iα, We have already derived this equation using, the work - kinetic energy route., 7.13.1 Conservation of angular momentum, We are now in a position to revisit the principle, of conservation of angular momentum in the, context of rotation about a fixed axis. From Eq., (7.45c), if the external torque is zero,, Lz = Iω = constant, (7.46), For symmetric bodies, from Eq. (7.44d), Lz, may be replaced by L .(L and Lz are respectively, the magnitudes of L and Lz.), This then is the required form, for fixed axis, rotation, of Eq. (7.29a), which expresses the, general law of conservation of angular, momentum of a system of particles. Eq. (7.46), applies to many situations that we come across, in daily life. You may do this experiment with, your friend. Sit on a swivel chair (a chair with a, seat, free to rotate about a pivot) with your arms, folded and feet not resting on, i.e., away from,, the ground. Ask your friend to rotate the chair, rapidly. While the chair is rotating with, , Fig 7.36 (a) A demonstration of conservation of, angular momentum. A girl sits on a, swivel chair and stretches her arms/, brings her arms closer to the body., , 173, , considerable angular speed stretch your arms, horizontally. What happens? Your angular, speed is reduced. If you bring back your arms, closer to your body, the angular speed increases, again. This is a situation where the principle of, conservation of angular momentum is, applicable. If friction in the rotational, mechanism is neglected, there is no external, torque about the axis of rotation of the chair, and hence Iω is constant. Stretching the arms, increases I about the axis of rotation, resulting, in decreasing the angular speed ω. Bringing, the arms closer to the body has the opposite, effect., A circus acrobat and a diver take advantage, of this principle. Also, skaters and classical,, Indian or western, dancers performing a, pirouette (a spinning about a tip–top) on the toes, of one foot display ‘mastery’ over this principle., Can you explain?, 7.14 ROLLING MOTION, One of the most common motions observed in, daily life is the rolling motion. All wheels used, in transportation have rolling motion. For, specificness we shall begin with the case of a, disc, but the result will apply to any rolling body, rolling on a level surface. We shall assume that, the disc rolls without slipping. This means that, at any instant of time the bottom of the disc, , Fig 7.36 (b), , 2018-19, , An acrobat employing the principle of, conservation of angular momentum in, her performance.

Page 174 :
174, , PHYSICS, , which is in contact with the surface is at rest, on the surface., We have remarked earlier that rolling motion, is a combination of rotation and translation. We, know that the translational motion of a system, of particles is the motion of its centre of mass., , Fig. 7.37 The rolling motion (without slipping) of a, disc on a level surface. Note at any instant,, the point of contact P0 of the disc with the, surface is at rest; the centre of mass of, the disc moves with velocity, vcm. The disc, rotates with angular velocity ω about its, axis which passes through C; vcm =Rω,, where R is the radius of the disc., , Let vcm be the velocity of the centre of mass, and therefore the translational velocity of the, disc. Since the centre of mass of the rolling disc, is at its geometric centre C (Fig. 7. 37), vcm is, the velocity of C. It is parallel to the level, surface. The rotational motion of the disc is, about its symmetry axis, which passes through, C. Thus, the velocity of any point of the disc,, like P0, P1 or P2, consists of two parts, one is the, translational velocity vcm and the other is the, linear velocity vr on account of rotation. The, magnitude of vr is vr = rω, where ω is the angular, velocity of the rotation of the disc about the axis, and r is the distance of the point from the axis, (i.e. from C). The velocity v r is directed, perpendicular to the radius vector of the given, point with respect to C. In Fig. 7.37, the velocity, of the point P2 (v2) and its components vr and, vcm are shown; vr here is perpendicular to CP2 ., It is easy to show that vz is perpendicular to the, line POP2. Therefore the line passing through PO, and parallel to ω is called the instantaneous axis, of rotation., , 2018-19, , At Po, the linear velocity, vr, due to rotation, is directed exactly opposite to the translational, velocity vcm. Further the magnitude of vr here is, Rω, where R is the radius of the disc. The, condition that Po is instantaneously at rest, requires vcm = Rω. Thus for the disc the condition, for rolling without slipping is, υcm = R ω, (7.47), Incidentally, this means that the velocity of, point P 1 at the top of the disc (v 1) has a, magnitude vcm+ R ω or 2 vcm and is directed, parallel to the level surface. The condition (7.47), applies to all rolling bodies., 7.14.1 Kinetic Energy of Rolling Motion, Our next task will be to obtain an expression, for the kinetic energy of a rolling body. The, kinetic energy of a rolling body can be separated, into kinetic energy of translation and kinetic, energy of rotation. This is a special case of a, general result for a system of particles,, according to which the kinetic energy of a, system of particles (K) can be separated into, the kinetic energy of translational motion of the, centre of mass (MV2/2) and kinetic energy of, rotational motion about the centre of mass of, the system of particles (K′). Thus,, (7.48), We assume this general result (see Exercise, 7.31), and apply it to the case of rolling motion., In our notation, the kinetic energy of the centre, of mass, i.e., the kinetic energy of translation,, of the rolling body is mv2cm /2, where m is the, mass of the body and vcm is the centre of the, mass velocity. Since the motion of the rolling, body about the centre of mass is rotation, K′, represents the kinetic energy of rotation of the, body;, , where I is the moment of, inertia about the appropriate axis, which is the, symmetry axis of the rolling body. The kinetic, energy of a rolling body, therefore, is given by, (7.49a), Substituting I = mk 2 where k = the, corresponding radius of gyration of the body, and vcm= R ω, we get, , or, , (7.49b)

Page 175 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , 175, , Equation (7.49b) applies to any rolling body:, a disc, a cylinder, a ring or a sphere., u Example 7.16 Three bodies, a ring, a solid, cylinder and a solid sphere roll down the, same inclined plane without slipping. They, start from rest. The radii of the bodies are, identical. Which of the bodies reaches the, ground with maximum velocity?, , mgh =, , , 1, k2 , m υ 2 1 + 2 , 2, R , , ,  2 gh , 2, or υ = , 2, 2 , 1 + k R , Note is independent of the mass of the, rolling body;, For a ring, k2 = R2, , Answer We assume conservation of energy of, the rolling body, i.e. there is no loss of energy, due to friction etc. The potential energy lost by, the body in rolling down the inclined plane, (= mgh) must, therefore, be equal to kinetic, energy gained. (See Fig.7.38) Since the bodies, start from rest the kinetic energy gained is equal, to the final kinetic energy of the bodies. From, , 2 gh, ,, 1 +1, , υring =, =, , gh, For a solid cylinder k2 = R2/2, , υdisc =, , , 1, k2 , mυ 2 1 + 2  , where v is the, 2, R , , final velocity of (the centre of mass of) the body., Equating K and mgh,, , Eq. (7.49b), K =, , 2gh, 1 +1 2, , 4 gh, 3, For a solid sphere k2 = 2R2/5, , =, , 2 gh, 1+ 2 5, , υsphere =, , 10gh, 7, From the results obtained it is clear that among, the three bodies the sphere has the greatest and, the ring has the least velocity of the centre of mass, at the bottom of the inclined plane., Suppose the bodies have the same mass. Which, body has the greatest rotational kinetic energy while, reaching the bottom of the inclined plane?, t, , =, , Fig.7.38, , SUMMARY, 1., 2., , 3., , 4., 5., , Ideally, a rigid body is one for which the distances between different particles of the, body do not change, even though there are forces on them., A rigid body fixed at one point or along a line can have only rotational motion. A rigid, body not fixed in some way can have either pure translational motion or a combination, of translational and rotational motions., In rotation about a fixed axis, every particle of the rigid body moves in a circle which, lies in a plane perpendicular to the axis and has its centre on the axis. Every Point in, the rotating rigid body has the same angular velocity at any instant of time., In pure translation, every particle of the body moves with the same velocity at any, instant of time., Angular velocity is a vector. Its magnitude is ω = dθ/dt and it is directed along the axis, of rotation. For rotation about a fixed axis, this vector ω has a fixed direction., , 2018-19

Page 176 :
176, , PHYSICS, , 6., , 7., , 8., , The vector or cross product of two vector a and b is a vector written as a×b. The, magnitude of this vector is absinθ and its direction is given by the right handed screw, or the right hand rule., The linear velocity of a particle of a rigid body rotating about a fixed axis is given by, v = ω × r, where r is the position vector of the particle with respect to an origin along, the fixed axis. The relation applies even to more general rotation of a rigid body with, one point fixed. In that case r is the position vector of the particle with respect to the, fixed point taken as the origin., The centre of mass of a system of n particles is defined as the point whose position, vector is, , ∑ m i ri, , R=, 9., , M, , Velocity of the centre of mass of a system of particles is given by V = P/M, where P is the, linear momentum of the system. The centre of mass moves as if all the mass of the, system is concentrated at this point and all the external forces act at it. If the total, external force on the system is zero, then the total linear momentum of the system is, constant., , 10. The angular momentum of a system of n particles about the origin is, n, , ∑ ri, , L =, , × pi, , i = 1, , The torque or moment of force on a system of n particles about the origin is, , τ =, , ∑ ri, , × Fi, , 1, , The force Fi acting on the ith particle includes the external as well as internal forces., Assuming Newton’s third law of motion and that forces between any two particles act, along the line joining the particles, we can show τint = 0 and, , dL, = τ ext, dt, 11. A rigid body is in mechanical equilibrium if, (1) it is in translational equilibrium, i.e., the total external force on it is zero :, , ∑F, , i, , =0 ,, , and, (2) it is in rotational equilibrium, i.e. the total external torque on it is zero :, , ∑ τ i = ∑ ri × Fi = 0 ., 12. The centre of gravity of an extended body is that point where the total gravitational, torque on the body is zero., 13. The moment of intertia of a rigid body about an axis is defined by the formula I =, , ∑ m i ri2, , where ri is the perpendicular distance of the ith point of the body from the axis. The, kinetic energy of rotation is K =, , 1, Iω2 ., 2, , 14. The theorem of parallel axes: I z′ = I z + Ma 2 , allows us to determine the moment of, intertia of a rigid body about an axis as the sum of the moment of inertia of the body, about a parallel axis through its centre of mass and the product of mass and square of, the perpendicular distance between these two axes., , 2018-19

Page 177 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , 177, , 15. Rotation about a fixed axis is directly analogous to linear motion in respect of kinematics, and dynamics., 16. For a rigid body rotating about a fixed axis (say, z-axis) of rotation, Lz = Iω, where I is, the moment of inertia about z-axis. In general, the angular momentum L for such a, body is not along the axis of rotation. Only if the body is symmetric about the axis of, rotation, L is along the axis of rotation. In that case, L = L z = I ω . The angular, , acceleration of a rigid body rotating about a fixed axis is given by Iα = τ. If the external, torque τ acting on the body is zero, the component of angular momentum about the, fixed axis (say, z-axis), Lz (=Iω) of such a rotating body is constant., 17. For rolling motion without slipping vcm = Rω, where vcm is the velocity of translation (i.e., of the centre of mass), R is the radius and m is the mass of the body. The kinetic energy, of such a rolling body is the sum of kinetic energies of translation and rotation:, , K=, , 1, 1, 2, m vcm, + Iω 2 ., 2, 2, , POINTS TO PONDER, 1., , 2., , 3., 4., , 5., , 6., 7., 8., , To determine the motion of the centre of mass of a system no knowledge of internal, forces of the system is required. For this purpose we need to know only the external, forces on the body., Separating the motion of a system of particles as the motion of the centre of mass, (i.e.,, the translational motion of the system) and motion about (i.e. relative to) the centre of, mass of the system is a useful technique in dynamics of a system of particles. One, example of this technique is separating the kinetic energy of a system of particles K as, the kinetic energy of the system about its centre of mass K′ and the kinetic energy of, the centre of mass MV2/2,, K = K′ + MV2/2, Newton’s Second Law for finite sized bodies (or systems of particles) is based in Newton’s, Second Law and also Newton’s Third Law for particles., To establish that the time rate of change of the total angular momentum of a system of, particles is the total external torque in the system, we need not only Newton’s second, law for particles, but also Newton’s third law with the provision that the forces between, any two particles act along the line joining the particles., The vanishing of the total external force and the vanishing of the total external torque, are independent conditions. We can have one without the other. In a couple, total, external force is zero, but total torque is non-zero., The total torque on a system is independent of the origin if the total external force is, zero., The centre of gravity of a body coincides with its centre of mass only if the gravitational, field does not vary from one part of the body to the other., The angular momentum L and the angular velocity ω are not necessarily parallel vectors., However, for the simpler situations discussed in this chapter when rotation is about a, ω holds good,, fixed axis which is an axis of symmetry of the rigid body, the relation L = Iω, where I is the moment of the inertia of the body about the rotation axis., , 2018-19

Page 178 :
178, , PHYSICS, , EXERCISES, 7.1, , Give the location of the centre of mass of a (i) sphere, (ii) cylinder, (iii) ring, and (iv), cube, each of uniform mass density. Does the centre of mass of a body necessarily, lie inside the body ?, , 7.2, , In the HCl molecule, the separation between the nuclei of the two atoms is about, 1.27 Å (1 Å = 10-10 m). Find the approximate location of the CM of the molecule,, given that a chlorine atom is about 35.5 times as massive as a hydrogen atom and, nearly all the mass of an atom is concentrated in its nucleus., A child sits stationary at one end of a long trolley moving uniformly with a speed V, on a smooth horizontal floor. If the child gets up and runs about on the trolley in any, manner, what is the speed of the CM of the (trolley + child) system ?, Show that the area of the triangle contained between the vectors a and b is one half, of the magnitude of a × b., Show that a.(b × c) is equal in magnitude to the volume of the parallelepiped formed, on the three vectors , a, b and c., Find the components along the x, y, z axes of the angular momentum l of a particle,, whose position vector is r with components x, y, z and momentum is p with, components px, py and pz. Show that if the particle moves only in the x-y plane the, angular momentum has only a z-component., Two particles, each of mass m and speed v, travel in opposite directions along parallel, lines separated by a distance d. Show that the angular momentum vector of the two, particle system is the same whatever be the point about which the angular momentum, is taken., A non-uniform bar of weight W is suspended at rest by two strings of negligible, weight as shown in Fig.7.39. The angles made by the strings with the vertical are, 36.9° and 53.1° respectively. The bar is 2 m long. Calculate the distance d of the, centre of gravity of the bar from its left end., , 7.3, , 7.4, 7.5, 7.6, , 7.7, , 7.8, , Fig. 7.39, 7.9, , A car weighs 1800 kg. The distance between its front and back axles is 1.8 m. Its, centre of gravity is 1.05 m behind the front axle. Determine the force exerted by the, level ground on each front wheel and each back wheel., , 7.10 (a) Find the moment of inertia of a sphere about a tangent to the sphere, given the, moment of inertia of the sphere about any of its diameters to be 2MR2/5, where, M is the mass of the sphere and R is the radius of the sphere., (b) Given the moment of inertia of a disc of mass M and radius R about any of its, diameters to be MR2/4, find its moment of inertia about an axis normal to the, disc and passing through a point on its edge., , 2018-19

Page 179 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , 179, , 7.11, , Torques of equal magnitude are applied to a hollow cylinder and a solid sphere, both, having the same mass and radius. The cylinder is free to rotate about its standard, axis of symmetry, and the sphere is free to rotate about an axis passing through its, centre. Which of the two will acquire a greater angular speed after a given time., 7.12 A solid cylinder of mass 20 kg rotates about its axis with angular speed 100 rad s-1., The radius of the cylinder is 0.25 m. What is the kinetic energy associated with the, rotation of the cylinder? What is the magnitude of angular momentum of the cylinder, about its axis?, 7.13 (a) A child stands at the centre of a turntable with his two arms outstretched. The, turntable is set rotating with an angular speed of 40 rev/min. How much is the, angular speed of the child if he folds his hands back and thereby reduces his, moment of inertia to 2/5 times the initial value ? Assume that the turntable, rotates without friction., (b) Show that the child’s new kinetic energy of rotation is more than the initial, kinetic energy of rotation. How do you account for this increase in kinetic energy?, 7.14 A rope of negligible mass is wound round a hollow cylinder of mass 3 kg and radius, 40 cm. What is the angular acceleration of the cylinder if the rope is pulled with a, force of 30 N ? What is the linear acceleration of the rope ? Assume that there is no, slipping., 7.15 To maintain a rotor at a uniform angular speed of 200 rad s-1, an engine needs to, transmit a torque of 180 N m. What is the power required by the engine ?, (Note: uniform angular velocity in the absence of friction implies zero torque. In, practice, applied torque is needed to counter frictional torque). Assume that the, engine is 100% efficient., 7.16 From a uniform disk of radius R, a circular hole of radius R/2 is cut out. The centre, of the hole is at R/2 from the centre of the original disc. Locate the centre of gravity, of the resulting flat body., 7.17 A metre stick is balanced on a knife edge at its centre. When two coins, each of mass, 5 g are put one on top of the other at the 12.0 cm mark, the stick is found to be, balanced at 45.0 cm. What is the mass of the metre stick?, 7.18 A solid sphere rolls down two different inclined planes of the same heights but, different angles of inclination. (a) Will it reach the bottom with the same speed in, each case? (b) Will it take longer to roll down one plane than the other? (c) If so,, which one and why?, 7.19 A hoop of radius 2 m weighs 100 kg. It rolls along a horizontal floor so that its centre, of mass has a speed of 20 cm/s. How much work has to be done to stop it?, 7.20 The oxygen molecule has a mass of 5.30 × 10-26 kg and a moment of inertia of, 1.94×10-46 kg m2 about an axis through its centre perpendicular to the lines joining, the two atoms. Suppose the mean speed of such a molecule in a gas is 500 m/s and, that its kinetic energy of rotation is two thirds of its kinetic energy of translation., Find the average angular velocity of the molecule., 7.21 A solid cylinder rolls up an inclined plane of angle of inclination 30°. At the bottom, of the inclined plane the centre of mass of the cylinder has a speed of 5 m/s., (a) How far will the cylinder go up the plane?, (b) How long will it take to return to the bottom?, Additional Exercises, 7.22, , As shown in Fig.7.40, the two sides of a step ladder BA and CA are 1.6 m long and, hinged at A. A rope DE, 0.5 m is tied half way up. A weight 40 kg is suspended from, a point F, 1.2 m from B along the ladder BA. Assuming the floor to be frictionless, and neglecting the weight of the ladder, find the tension in the rope and forces, exerted by the floor on the ladder. (Take g = 9.8 m/s2), (Hint: Consider the equilibrium of each side of the ladder separately.), , 2018-19

Page 180 :
180, , PHYSICS, , Fig.7.40, 7.23 A man stands on a rotating platform, with his arms stretched horizontally holding a, 5 kg weight in each hand. The angular speed of the platform is 30 revolutions per, minute. The man then brings his arms close to his body with the distance of each, weight from the axis changing from 90cm to 20cm. The moment of inertia of the, man together with the platform may be taken to be constant and equal to 7.6 kg m2., (a) What is his new angular speed? (Neglect friction.), (b) Is kinetic energy conserved in the process? If not, from where does the change, come about?, 7.24 A bullet of mass 10 g and speed 500 m/s is fired into a door and gets embedded, exactly at the centre of the door. The door is 1.0 m wide and weighs 12 kg. It is, hinged at one end and rotates about a vertical axis practically without friction. Find, the angular speed of the door just after the bullet embeds into it., (Hint: The moment of inertia of the door about the vertical axis at one end is ML2/3.), 7.25, , Two discs of moments of inertia I1 and I2 about their respective axes (normal to the, disc and passing through the centre), and rotating with angular speeds ω1 and ω2, are brought into contact face to face with their axes of rotation coincident. (a) What, is the angular speed of the two-disc system? (b) Show that the kinetic energy of the, combined system is less than the sum of the initial kinetic energies of the two discs., How do you account for this loss in energy? Take ω1 ≠ ω2., 7.26 (a) Prove the theorem of perpendicular axes., (Hint : Square of the distance of a point (x, y) in the x–y plane from an axis through, the origin and perpendicular to the plane is x2+y2)., (b) Prove the theorem of parallel axes., (Hint : If the centre of mass of a system of n particles is chosen to be the origin, , ∑ m i ri, 7.27, , v2 =, , 7.28, , = 0 )., , Prove the result that the velocity v of translation of a rolling body (like a ring, disc,, cylinder or sphere) at the bottom of an inclined plane of a height h is given by, , 2 gh, , (1 + k, , 2, , / R2, , ), , using dynamical consideration (i.e. by consideration of forces and torques). Note k is, the radius of gyration of the body about its symmetry axis, and R is the radius of the, body. The body starts from rest at the top of the plane., A disc rotating about its axis with angular speed ωo is placed lightly (without any, translational push) on a perfectly frictionless table. The radius of the disc is R. What, , 2018-19

Page 181 :
SYSTEMS OF PARTICLES AND ROTATIONAL MOTION, , 181, , are the linear velocities of the points A, B and C on the disc shown in Fig. 7.41? Will the disc roll in, the direction indicated ?, , Fig. 7.41, 7.29 Explain why friction is necessary to make the disc in Fig. 7.41 roll in the direction indicated., (a) Give the direction of frictional force at B, and the sense of frictional torque, before perfect rolling, begins., (b) What is the force of friction after perfect rolling begins ?, 7.30 A solid disc and a ring, both of radius 10 cm are placed on a horizontal table, simultaneously, with initial angular speed equal to 10 π rad s-1. Which of the two will start to roll, earlier ? The co-efficient of kinetic friction is µ = 0.2., k, 7.31 A cylinder of mass 10 kg and radius 15 cm is rolling perfectly on a plane of inclination 30o. The coefficient of static friction µs = 0.25., (a) How much is the force of friction acting on the cylinder ?, (b) What is the work done against friction during rolling ?, (c) If the inclination θ of the plane is increased, at what value of θ does the cylinder begin to skid,, and not roll perfectly ?, 7.32 Read each statement below carefully, and state, with reasons, if it is true or false;, (a) During rolling, the force of friction acts in the same direction as the direction of motion of the CM, of the body., (b) The instantaneous speed of the point of contact during rolling is zero., (c) The instantaneous acceleration of the point of contact during rolling is zero., (d) For perfect rolling motion, work done against friction is zero., (e) A wheel moving down a perfectly frictionless inclined plane will undergo slipping (not rolling), motion., 7.33 Separation of Motion of a system of particles into motion of the centre of mass and motion about the, centre of mass :, (a) Show p = pi′ + m i V, where pi is the momentum of the ith particle (of mass mi) and p′′i = mi v′′ i. Note v′′ i is the velocity, of the ith particle relative to the centre of mass., Also, prove using the definition of the centre of mass, , ∑, , pi′ = 0, , (b) Show K = K ′ + ½MV 2, where K is the total kinetic energy of the system of particles, K ′ is the total kinetic energy of the, system when the particle velocities are taken with respect to the centre of mass and MV2/2 is the, kinetic energy of the translation of the system as a whole (i.e. of the centre of mass motion of the, system). The result has been used in Sec. 7.14., (c) Show L = L ′ + R × MV, where L ′ =, , ∑ r ′i × pi′, , is the angular momentum of the system about the centre of mass with, , 2018-19

Page 182 :
182, , PHYSICS, , velocities taken relative to the centre of mass. Remember ri′ = ri – R ; rest of the, , notation is the standard notation used in the chapter. Note L ′ and MR × V can, be said to be angular momenta, respectively, about and of the centre of mass of, the system of particles., (d) Show, , dL ′, dp ′, = ∑ ri′ ×, dt, dt, , Further, show that, , dL ′, = τ ext, ′, dt, where τ′ext is the sum of all external torques acting on the system about the, centre of mass., (Hint : Use the definition of centre of mass and third law of motion. Assume the, internal forces between any two particles act along the line joining the particles.), , Pluto - A Dwarf Planet, The International Astronomical Union (IAU) at the IAU 2006 General Assembly, held on August 24, 2006, in Prague in Czech Republic, adopted a new, definition of planets in our Solar System. According to the new definition,, Pluto is no longer a planet. This means that the Solar System consists of, eight planets: Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus and, Neptune. According to the IAU usage, the ‘planet’ and ‘other bodies’ in our, Solar System, except satellites, are to be defined into three distinct categories, of celestial objects in the following way:, 1. A ‘planet’ is a celestial body that (a) is in orbit around the Sun, (b) has, sufficient mass for its self-gravity to overcome rigid body forces so that it, assumes a hydrostatic equilibrium (nearly round) shape, and (c) has, cleared the neighbourhood around its orbit., 2. A ‘dwarf planet’ is a celestial body that (a) is in orbit around the Sun,, (b) has sufficient mass for its self-gravity to overcome rigid body forces so, that it assumes a hydrostatic equilibrium (nearly round) shape, (c) has, not cleared the neighbourhood around its orbit, and (d) is not a satellite., 3. All ‘other objects’, except satellites, orbiting the Sun, shall be referred to, collectively as ‘Small Solar-System Bodies’., Unlike other eight planets in the Solar System, Pluto’s orbital path overlaps, with ‘other objects’ and the planet Neptune. The ‘other objects’ currently, include most of the Solar System asteroids, most of the Trans-Neptunian, Objects (TNOs), comets, and other small bodies., Pluto is a ‘dwarf planet’ by the above definition and is recognised as the, prototype of a new category of Trans-Neptunian Objects., , 2018-19

Page 183 :
CHAPTER EIGHT, , GRAVITATION, , 8.1 INTRODUCTION, , 8.1, 8.2, 8.3, , Introduction, Kepler’s laws, Universal law of, gravitation, 8.4 The gravitational, constant, 8.5 Acceleration due to, gravity of the earth, 8.6 Acceleration due to, gravity below and above, the surface of earth, 8.7 Gravitational potential, energy, 8.8 Escape speed, 8.9 Earth satellites, 8.10 Energy of an orbiting, satellite, 8.11 Geostationary and polar, satellites, 8.12 Weightlessness, Summary, Points to ponder, Exercises, Additional exercises, , Early in our lives, we become aware of the tendency of all, material objects to be attracted towards the earth. Anything, thrown up falls down towards the earth, going uphill is lot, more tiring than going downhill, raindrops from the clouds, above fall towards the earth and there are many other such, phenomena. Historically it was the Italian Physicist Galileo, (1564-1642) who recognised the fact that all bodies,, irrespective of their masses, are accelerated towards the earth, with a constant acceleration. It is said that he made a public, demonstration of this fact. To find the truth, he certainly did, experiments with bodies rolling down inclined planes and, arrived at a value of the acceleration due to gravity which is, close to the more accurate value obtained later., A seemingly unrelated phenomenon, observation of stars,, planets and their motion has been the subject of attention in, many countries since the earliest of times. Observations since, early times recognised stars which appeared in the sky with, positions unchanged year after year. The more interesting, objects are the planets which seem to have regular motions, against the background of stars. The earliest recorded model, for planetary motions proposed by Ptolemy about 2000 years, ago was a ‘geocentric’ model in which all celestial objects,, stars, the sun and the planets, all revolved around the earth., The only motion that was thought to be possible for celestial, objects was motion in a circle. Complicated schemes of motion, were put forward by Ptolemy in order to describe the observed, motion of the planets. The planets were described as moving, in circles with the centre of the circles themselves moving in, larger circles. Similar theories were also advanced by Indian, astronomers some 400 years later. However a more elegant, model in which the Sun was the centre around which the, planets revolved – the ‘heliocentric’ model – was already, mentioned by Aryabhatta (5th century A.D.) in his treatise. A, thousand years later, a Polish monk named Nicolas, , 2018-19

Page 184 :
184, , PHYSICS, , Copernicus (1473-1543) proposed a definitive, model in which the planets moved in circles, around a fixed central sun. His theory was, discredited by the church, but notable amongst, its supporters was Galileo who had to face, prosecution from the state for his beliefs., It was around the same time as Galileo, a, nobleman called Tycho Brahe (1546-1601), hailing from Denmark, spent his entire lifetime, recording observations of the planets with the, naked eye. His compiled data were analysed, later by his assistant Johannes Kepler (15711640). He could extract from the data three, elegant laws that now go by the name of Kepler’s, laws. These laws were known to Newton and, enabled him to make a great scientific leap in, proposing his universal law of gravitation., 8.2 KEPLER’S LAWS, The three laws of Kepler can be stated as follows:, 1. Law of orbits : All planets move in elliptical, orbits with the Sun situated at one of the foci, B, , P, , S', , S, , A, , 2b, , of the ellipse (Fig. 8.1a). This law was a deviation, from the Copernican model which allowed only, circular orbits. The ellipse, of which the circle is, a special case, is a closed curve which can be, drawn very simply as follows., Select two points F1 and F2. Take a length, of a string and fix its ends at F1 and F2 by pins., With the tip of a pencil stretch the string taut, and then draw a curve by moving the pencil, keeping the string taut throughout.(Fig. 8.1(b)), The closed curve you get is called an ellipse., Clearly for any point T on the ellipse, the sum of, the distances from F1 and F2 is a constant. F1,, F2 are called the focii. Join the points F1 and F2, and extend the line to intersect the ellipse at, points P and A as shown in Fig. 8.1(b). The, midpoint of the line PA is the centre of the ellipse, O and the length PO = AO is called the semimajor axis of the ellipse. For a circle, the two, focii merge into one and the semi-major axis, becomes the radius of the circle., 2. Law of areas : The line that joins any planet, to the sun sweeps equal areas in equal intervals, of time (Fig. 8.2). This law comes from the, observations that planets appear to move slower, when they are farther from the sun than when, they are nearer., , C, 2a, , Fig. 8.1(a) An ellipse traced out by a planet around, the sun. The closest point is P and the, farthest point is A, P is called the, perihelion and A the aphelion. The, semimajor axis is half the distance AP., , Fig. 8.2 The planet P moves around the sun in an, elliptical orbit. The shaded area is the area, ∆A swept out in a small interval of time ∆t., , Fig. 8.1(b) Drawing an ellipse. A string has its ends, fixed at F1 and F2. The tip of a pencil holds, the string taut and is moved around., , *, , Refer to information given in the Box on Page 182, , 2018-19, , 3. Law of periods : The square of the time period, of revolution of a planet is proportional to the, cube of the semi-major axis of the ellipse traced, out by the planet., Table 8.1 gives the approximate time periods, of revolution of eight* planets around the sun, along with values of their semi-major axes.

Page 185 :
GRAVITATION, , 185, , Table 8.1 Data from measurement of, planetary motions given below, confirm Kepler’s Law of Periods, (a ≡ Semi-major axis in units of 1010 m., T ≡ Time period of revolution of the planet, in years(y)., Q ≡ The quotient ( T2/a3 ) in units of, 10 -34 y2 m-3.), Planet, Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, Neptune, Pluto*, , a, , T, , Q, , 5.79, 10.8, 15.0, 22.8, 77.8, 143, 287, 450, 590, , 0.24, 0.615, 1, 1.88, 11.9, 29.5, 84, 165, 248, , 2.95, 3.00, 2.96, 2.98, 3.01, 2.98, 2.98, 2.99, 2.99, , The law of areas can be understood as a, consequence of conservation of angular, momentum whch is valid for any central force ., A central force is such that the force on the, planet is along the vector joining the Sun and, the planet. Let the Sun be at the origin and let, the position and momentum of the planet be, denoted by r and p respectively. Then the area, swept out by the planet of mass m in time, interval ∆t is (Fig. 8.2) ∆A given by, (8.1), ∆A = ½ (r × v∆t), Hence, ∆A /∆t =½ (r × p)/m, (since v = p/m), = L / (2 m), (8.2), where v is the velocity, L is the angular, momentum equal to ( r × p). For a central, force, which is directed along r, L is a constant, Johannes, Kepler, (1571–1630) was a, scientist of German, origin. He formulated, the three laws of, planetary motion based, on the painstaking, observations of Tycho, Brahe and coworkers. Kepler himself was an, assistant to Brahe and it took him sixteen long, years to arrive at the three planetary laws. He, is also known as the founder of geometrical, optics, being the first to describe what happens, to light after it enters a telescope., , *, , as the planet goes around. Hence, ∆ A /∆t is a, constant according to the last equation. This is, the law of areas. Gravitation is a central force, and hence the law of areas follows., t Example 8.1 Let the speed of the planet, at the perihelion P in Fig. 8.1(a) be vP and, the Sun-planet distance SP be rP. Relate, {rP, vP} to the corresponding quantities at, the aphelion {rA, vA}. Will the planet take, equal times to traverse BAC and CPB ?, Answer The magnitude of the angular, momentum at P is Lp = mp rp vp, since inspection, tells us that r p and v p are mutually, perpendicular. Similarly, LA = mp rA vA . From, angular momentum conservation, mp rp vp = mp rA vA, vp, , or, , vA, , =, , rA, rp, , t, , Since rA > rp, vp > vA ., The area SBAC bounded by the ellipse and, the radius vectors SB and SC is larger than SBPC, in Fig. 8.1. From Kepler’s second law, equal areas, are swept in equal times. Hence the planet will, take a longer time to traverse BAC than CPB., 8.3 UNIVERSAL LAW OF GRAVITATION, Legend has it that observing an apple falling, from a tree, Newton was inspired to arrive at an, universal law of gravitation that led to an, explanation of terrestrial gravitation as well as, of Kepler’s laws. Newton’s reasoning was that, the moon revolving in an orbit of radius Rm was, subject to a centripetal acceleration due to, earth’s gravity of magnitude, am =, , 4π 2 Rm, V2, =, Rm, T2, , (8.3), , where V is the speed of the moon related to the, time period T by the relation V = 2π Rm / T . The, time period T is about 27.3 days and Rm was, already known then to be about 3.84 × 108m. If, we substitute these numbers in Eq. (8.3), we, get a value of am much smaller than the value of, acceleration due to gravity g on the surface of, the earth, arising also due to earth’s gravitational, attraction., , Refer to information given in the Box on Page 182, , 2018-19

Page 186 :
186, , PHYSICS, , Central Forces, We know the time rate of change of the angular momentum of a single particle about the origin, is, , dl, =r ×F, dt, The angular momentum of the particle is conserved, if the torque τ = r × F due to the, force F on it vanishes. This happens either when F is zero or when F is along r. We are, interested in forces which satisfy the latter condition. Central forces satisfy this condition., A ‘central’ force is always directed towards or away from a fixed point, i.e., along the position, vector of the point of application of the force with respect to the fixed point. (See Figure below.), Further, the magnitude of a central force F depends on r, the distance of the point of application, of the force from the fixed point; F = F(r)., In the motion under a central force the angular momentum is always conserved. Two important, results follow from this:, (1) The motion of a particle under the central force is always confined to a plane., (2) The position vector of the particle with respect to the centre of the force (i.e. the fixed point), has a constant areal velocity. In other words the position vector sweeps out equal areas in, equal times as the particle moves under the influence of the central force., Try to prove both these results. You may need to know that the areal velocity is given by :, dA/dt = ½ r v sin α., An immediate application of the above discussion can be made to the motion of a planet, under the gravitational force of the sun. For convenience the sun may be taken to be so heavy, that it is at rest. The gravitational force of the sun on the planet is directed towards the sun., This force also satisfies the requirement F = F(r), since F = G m1m2/r2 where m1 and m2 are, respectively the masses of the planet and the sun and G is the universal constant of gravitation., The two results (1) and (2) described above, therefore, apply to the motion of the planet. In fact,, the result (2) is the well-known second law of Kepler., , Tr is the trejectory of the particle under the central force. At a position P, the force is directed, along OP, O is the centre of the force taken as the origin. In time ∆t, the particle moves from P to P′,, arc PP′ = ∆s = v ∆t. The tangent PQ at P to the trajectory gives the direction of the velocity at P. The, area swept in ∆t is the area of sector POP′ ≈ (r sin α ) PP′/2 = (r v sin a) ∆t/2.), , 2018-19

Page 187 :
GRAVITATION, , 187, , This clearly shows that the force due to, earth’s gravity decreases with distance. If one, assumes that the gravitational force due to the, earth decreases in proportion to the inverse, square of the distance from the centre of the, −2, 2, earth, we will have am α Rm, ; g α R−, and we get, E, , R2, g, = m2
3600, am RE, , (8.4), , in agreement with a value of g
9.8 m s-2 and, the value of am from Eq. (8.3). These observations, led Newton to propose the following Universal Law, of Gravitation :, Every body in the universe attracts every other, body with a force which is directly proportional, to the product of their masses and inversely, proportional to the square of the distance, between them., The quotation is essentially from Newton’s, famous treatise called ‘Mathematical Principles, of Natural Philosophy’ (Principia for short)., Stated Mathematically, Newton’s gravitation, law reads : The force F on a point mass m2 due, to another point mass m1 has the magnitude, |F | = G, , m1 m 2, r2, , The gravitational force is attractive, i.e., the, force F is along – r. The force on point mass m1, due to m2 is of course – F by Newton’s third law., Thus, the gravitational force F12 on the body 1, due to 2 and F21 on the body 2 due to 1 are related, as F12 = – F21., Before we can apply Eq. (8.5) to objects under, consideration, we have to be careful since the, law refers to point masses whereas we deal with, extended objects which have finite size. If we have, a collection of point masses, the force on any, one of them is the vector sum of the gravitational, forces exerted by the other point masses as, shown in Fig 8.4., , (8.5), , Equation (8.5) can be expressed in vector form as, F= G, , = –G, , m1 m 2, m1 m 2 , – r = – G, r, 2, r, r2, , ( ), , m1 m 2 , r, 3, r, , where G is the universal gravitational constant,, r is the unit vector from m1 to m2 and r = r2 – r1, as shown in Fig. 8.3., , O, , Fig. 8.3 Gravitational force on m1 due to m2 is along, r where the vector r is (r2– r1)., , Fig. 8.4 Gravitational force on point mass m1 is the, vector sum of the gravitational forces exerted, by m2, m3 and m4., The total force on m1 is, , F1 =, , Gm 4 m1 , Gm 2 m1 , Gm 3 m1 , r 21 +, r 31 +, r 41, 2, 2, 2, r41, r21, r31, , t Example 8.2 Three equal masses of m kg, each are fixed at the vertices of an, equilateral triangle ABC., (a) What is the force acting on a mass 2m, placed at the centroid G of the triangle ?, (b) What is the force if the mass at the, vertex A is doubled ?, Take AG = BG = CG = 1 m (see Fig. 8.5), Answer (a) The angle between GC and the, positive x-axis is 30° and so is the angle between, GB and the negative x-axis. The individual forces, in vector notation are, , 2018-19

Page 188 :
188, , PHYSICS, , (b) Now if the mass at vertex A is doubled, then, , t, , Fig. 8.5 Three equal masses are placed at the three, vertices of the ∆ ABC. A mass 2m is placed, at the centroid G., , FGA =, , Gm (2m ) ˆ, j, 1, , FGB =, , Gm (2m ) ˆ, − i cos 30ο − ˆj sin 30ο, 1, , (, , ), , Gm (2m ) ˆ, + i cos 30ο − ˆj sin 30ο, 1, From the principle of superposition and the law, of vector addition, the resultant gravitational, force FR on (2m) is, FR = FGA + FGB + FGC, FGC =, , (, , ), , (, , FR = 2Gm2 ˆj + 2Gm 2 −ˆi cos 30ο −ˆj sin 30ο, , (, , ), , ), , + 2Gm 2 ˆi cos 30ο − ˆj sin 30ο = 0, , Alternatively, one expects on the basis of, symmetry that the resultant force ought to be, zero., , For the gravitational force between an extended, object (like the earth) and a point mass, Eq. (8.5) is not, directly applicable. Each point mass in the extended, object will exert a force on the given point mass and, these force will not all be in the same direction. We, have to add up these forces vectorially for all the point, masses in the extended object to get the total force., This is easily done using calculus. For two special, cases, a simple law results when you do that :, (1) The force of attraction between a hollow, spherical shell of uniform density and a, point mass situated outside is just as if, the entire mass of the shell is, concentrated at the centre of the shell., Qualitatively this can be understood as, follows: Gravitational forces caused by the, various regions of the shell have components, along the line joining the point mass to the, centre as well as along a direction, prependicular to this line. The components, prependicular to this line cancel out when, summing over all regions of the shell leaving, only a resultant force along the line joining, the point to the centre. The magnitude of, this force works out to be as stated above., , Newton’s Principia, Kepler had formulated his third law by 1619. The announcement of the underlying universal law of, gravitation came about seventy years later with the publication in 1687 of Newton’s masterpiece, Philosophiae Naturalis Principia Mathematica, often simply called the Principia., Around 1685, Edmund Halley (after whom the famous Halley’s comet is named), came to visit, Newton at Cambridge and asked him about the nature of the trajectory of a body moving under the, influence of an inverse square law. Without hesitation Newton replied that it had to be an ellipse,, and further that he had worked it out long ago around 1665 when he was forced to retire to his farm, house from Cambridge on account of a plague outbreak. Unfortunately, Newton had lost his papers., Halley prevailed upon Newton to produce his work in book form and agreed to bear the cost of, publication. Newton accomplished this feat in eighteen months of superhuman effort. The Principia, is a singular scientific masterpiece and in the words of Lagrange it is “the greatest production of the, human mind.” The Indian born astrophysicist and Nobel laureate S. Chandrasekhar spent ten years, writing a treatise on the Principia. His book, Newton’s Principia for the Common Reader brings, into sharp focus the beauty, clarity and breath taking economy of Newton’s methods., , 2018-19

Page 189 :
GRAVITATION, , (2), , The force of attraction due to a hollow, spherical shell of uniform density, on a, point mass situated inside it is zero., Qualitatively, we can again understand this, result. Various regions of the spherical shell, attract the point mass inside it in various, directions. These forces cancel each other, completely., , 8.4 THE GRAVITATIONAL CONSTANT, The value of the gravitational constant G, entering the Universal law of gravitation can be, determined experimentally and this was first, done by English scientist Henry Cavendish in, 1798. The apparatus used by him is, schematically shown in figure.8.6, , 189, , its neighbouring small sphere. Due to this, torque, the suspended wire gets twisted till such, time as the restoring torque of the wire equals, the gravitational torque . If θ is the angle of twist, of the suspended wire, the restoring torque is, proportional to θ, equal to τθ. Where τ is the, restoring couple per unit angle of twist. τ can be, measured independently e.g. by applying a, known torque and measuring the angle of twist., The gravitational force between the spherical, balls is the same as if their masses are, concentrated at their centres. Thus if d is the, separation between the centres of the big and, its neighbouring small ball, M and m their, masses, the gravitational force between the big, sphere and its neighouring small ball is., , Mm, (8.6), d2, If L is the length of the bar AB , then the, torque arising out of F is F multiplied by L. At, equilibrium, this is equal to the restoring torque, and hence, F =G, , Mm, L =τ θ, (8.7), d2, Observation of θ thus enables one to, calculate G from this equation., Since Cavendish’s experiment, the, measurement of G has been refined and the, currently accepted value is, G = 6.67×10-11 N m2/kg2, (8.8), G, , Fig. 8.6 Schematic drawing of Cavendish’s, experiment. S1 and S2 are large spheres, which are kept on either side (shown shades), of the masses at A and B. When the big, spheres are taken to the other side of the, masses (shown by dotted circles), the bar, AB rotates a little since the torque reverses, direction. The angle of rotation can be, measured experimentally., , The bar AB has two small lead spheres, attached at its ends. The bar is suspended from, a rigid support by a fine wire. Two large lead, spheres are brought close to the small ones but, on opposite sides as shown. The big spheres, attract the nearby small ones by equal and, opposite force as shown. There is no net force, on the bar but only a torque which is clearly, equal to F times the length of the bar,where F is, the force of attraction between a big sphere and, , 8.5 ACCELERATION DUE TO GRAVITY OF, THE EARTH, The earth can be imagined to be a sphere made, of a large number of concentric spherical shells, with the smallest one at the centre and the, largest one at its surface. A point outside the, earth is obviously outside all the shells. Thus,, all the shells exert a gravitational force at the, point outside just as if their masses are, concentrated at their common centre according, to the result stated in section 8.3. The total mass, of all the shells combined is just the mass of the, earth. Hence, at a point outside the earth, the, gravitational force is just as if its entire mass of, the earth is concentrated at its centre., For a point inside the earth, the situation, is different. This is illustrated in Fig. 8.7., , 2018-19

Page 190 :
190, , PHYSICS, , The acceleration experienced by the mass m,, which is usually denoted by the symbol g is, related to F by Newton’s 2nd law by relation, F = mg. Thus, g=, , Mr, , Fig. 8.7 The mass m is in a mine located at a depth, d below the surface of the Earth of mass, ME and radius RE. We treat the Earth to be, spherically symmetric., , Again consider the earth to be made up of, concentric shells as before and a point mass m, situated at a distance r from the centre. The, point P lies outside the sphere of radius r. For, the shells of radius greater than r, the point P, lies inside. Hence according to result stated in, the last section, they exert no gravitational force, on mass m kept at P. The shells with radius ≤ r, make up a sphere of radius r for which the point, P lies on the surface. This smaller sphere, therefore exerts a force on a mass m at P as if, its mass Mr is concentrated at the centre. Thus, the force on the mass m at P has a magnitude, , F GM E, =, m, R E2, , (8.12), , Acceleration g is readily measurable. RE is a, known quantity. The measurement of G by, Cavendish’s experiment (or otherwise), combined, with knowledge of g and RE enables one to, estimate ME from Eq. (8.12). This is the reason, why there is a popular statement regarding, Cavendish : “Cavendish weighed the earth”., 8.6 ACCELERATION DUE TO GRAVITY, BELOW AND ABOVE THE SURFACE OF, EARTH, Consider a point mass m at a height h above the, surface of the earth as shown in Fig. 8.8(a). The, radius of the earth is denoted by RE . Since this, point is outside the earth,, , Gm (M r ), (8.9), r2, We assume that the entire earth is of uniform, F =, , 4π 3, RE ρ, 3, where ME is the mass of the earth RE is its radius, and ρ is the density. On the other hand the, density and hence its mass is M E =, , mass of the sphere Mr of radius r is, , 4π, ρ r 3 and, 3, , Fig. 8.8 (a) g at a height h above the surface of the, earth., , hence, , G m ME, r, (8.10), RE 3, If the mass m is situated on the surface of, earth, then r = RE and the gravitational force on, it is, from Eq. (8.10), =, , M Em, F =G, R E2, , its distance from the centre of the earth is (RE +, h ). If F (h) denoted the magnitude of the force, on the point mass m , we get from Eq. (8.5) :, F (h ) =, , GM E m, (R E + h )2, , (8.13), , The acceleration experienced by the point, (8.11), , 2018-19, , mass is F (h )/ m ≡ g(h ) and we get

Page 191 :
GRAVITATION, , 191, , GM E, F (h ), ., =, (8.14), m, (R E + h )2, This is clearly less than the value of g on the, GM E, surface of earth : g = R 2 . For h << RE , we can, E, expand the RHS of Eq. (8.14) :, GM E, −2, g(h ) = 2, = g (1 + h / R E ), R E (1 + h / RE )2, g(h ) =, , h, For R <<1 , using binomial expression,, E, , , 2h , g (h ) ≅ g 1 −, ., (8.15), R E , , Equation (8.15) thus tells us that for small, heights h above the value of g decreases by a, factor (1 − 2h / RE )., Now, consider a point mass m at a depth d, below the surface of the earth (Fig. 8.8(b)), so, that its distance from the centre of the earth is, , ( RE − d ) as shown in the figure. The earth can, be thought of as being composed of a smaller, sphere of radius (RE – d ) and a spherical shell, of thickness d. The force on m due to the outer, shell of thickness d is zero because the result, quoted in the previous section. As far as the, smaller sphere of radius ( RE – d ) is concerned,, the point mass is outside it and hence according, to the result quoted earlier, the force due to this, smaller sphere is just as if the entire mass of, the smaller sphere is concentrated at the centre., If Ms is the mass of the smaller sphere, then,, Ms/ME = ( RE – d)3 / RE3, ( 8.16), Since mass of a sphere is proportional to be, cube of its radius., , Ms, , ME, , Fig. 8.8 (b) g at a depth d. In this case only the, smaller sphere of radius (R E –d), contributes to g., , Thus the force on the point mass is, F (d) = G Ms m / (RE – d ), , 2, , (8.17), , Substituting for Ms from above , we get, F (d) = G ME m ( RE – d ) / RE3, (8.18), and hence the acceleration due to gravity at, a depth d,, g(d) =, g (d ) =, , =g, , F (d ), is, m, F (d ) GM E, =, (RE − d ), m, R E3, , RE − d, = g(1 − d / R E ), RE, , (8.19), , Thus, as we go down below earth’s surface,, the acceleration due gravity decreases by a factor, , (1 − d / RE ). The remarkable thing about, acceleration due to earth’s gravity is that it is, maximum on its surface decreasing whether you, go up or down., 8.7 GRAVITATIONAL POTENTIAL ENERGY, We had discussed earlier the notion of potential, energy as being the energy stored in the body at, its given position. If the position of the particle, changes on account of forces acting on it, then, the change in its potential energy is just the, amount of work done on the body by the force., As we had discussed earlier, forces for which, the work done is independent of the path are, the conservative forces., The force of gravity is a conservative force, and we can calculate the potential energy of a, body arising out of this force, called the, gravitational potential energy. Consider points, close to the surface of earth, at distances from, the surface much smaller than the radius of the, earth. In such cases, the force of gravity is, practically a constant equal to mg, directed, towards the centre of the earth. If we consider, a point at a height h1 from the surface of the, earth and another point vertically above it at a, height h2 from the surface, the work done in, lifting the particle of mass m from the first to, the second position is denoted by W12, W12 = Force × displacement, = mg (h2 – h1), (8.20), , 2018-19

Page 192 :
192, , PHYSICS, , If we associate a potential energy W(h) at a, point at a height h above the surface such that, W(h) = mgh + Wo, (8.21), (where Wo = constant) ;, then it is clear that, W12 = W(h2) – W(h1), (8.22), The work done in moving the particle is just, the difference of potential energy between its, final and initial positions.Observe that the, constant Wo cancels out in Eq. (8.22). Setting, h = 0 in the last equation, we get W ( h = 0 ) =, Wo. . h = 0 means points on the surface of the, earth. Thus, Wo is the potential energy on the, surface of the earth., If we consider points at arbitrary distance, from the surface of the earth, the result just, derived is not valid since the assumption that, the gravitational force mg is a constant is no, longer valid. However, from our discussion we, know that a point outside the earth, the force of, gravitation on a particle directed towards the, centre of the earth is, , G ME m, (8.23), r2, where ME = mass of earth, m = mass of the, particle and r its distance from the centre of the, earth. If we now calculate the work done in, lifting a particle from r = r1 to r = r2 (r2 > r1) along, a vertical path, we get instead of Eq. (8.20), F=, , W12 = ∫, , r2, , r1, , GMm, dr, r2, ,  1 1, = −G ME m  − ,  r2 r1 , , We have calculated the potential energy at, a point of a particle due to gravitational forces, on it due to the earth and it is proportional to, the mass of the particle. The gravitational, potential due to the gravitational force of the, earth is defined as the potential energy of a, particle of unit mass at that point. From the, earlier discussion, we learn that the gravitational, potential energy associated with two particles, of masses m1 and m2 separated by distance by a, distance r is given by, , Gm1m 2, (if we choose V = 0 as r → ∞ ), r, It should be noted that an isolated system, of particles will have the total potential energy, that equals the sum of energies (given by the, above equation) for all possible pairs of its, constituent particles. This is an example of the, application of the superposition principle., V =–, , t Example 8.3 Find the potential energy of, a system of four particles placed at the, vertices of a square of side l. Also obtain, the potential at the centre of the square., Answer Consider four masses each of mass m, at the corners of a square of side l ; See Fig. 8.9., We have four mass pairs at distance l and two, diagonal pairs at distance 2 l, Hence,, W (r ) = − 4, , (8.24), , G m2, G m2, −2, l, 2l, , In place of Eq. (8.21), we can thus associate, a potential energy W(r) at a distance r, such that, , G ME m, + W1 ,, (8.25), r, valid for r > R ,, so that once again W12 = W(r 2 ) – W(r 1)., Setting r = infinity in the last equation, we get, W ( r = infinity ) = W1 . Thus, W1 is the, potential energy at infinity. One should note that, only the difference of potential energy between, two points has a definite meaning from Eqs., (8.22) and (8.24). One conventionally sets W1, equal to zero, so that the potential energy at a, point is just the amount of work done in, displacing the particle from infinity to that point., W (r ) = −, , 2018-19, , Fig. 8.9

Page 193 :
GRAVITATION, , 2G m2, =−, l, , 193, , Thus, the minimum speed required for an object, to reach infinity (i.e. escape from the earth), corresponds to, , 1 , G m2, ,  2 +,  = − 5.41, l, 2, , , The gravitational potential at the centre of, the square ( r = 2 l / 2 ) is, U (r ) = − 4 2, , Gm, l ., , t, , If a stone is thrown by hand, we see it falls back, to the earth. Of course using machines we can, shoot an object with much greater speeds and, with greater and greater initial speed, the object, scales higher and higher heights. A natural, query that arises in our mind is the following:, ‘can we throw an object with such high initial, speeds that it does not fall back to the earth?’, The principle of conservation of energy helps, us to answer this question. Suppose the object, did reach infinity and that its speed there was, Vf . The energy of an object is the sum of potential, and kinetic energy. As before W1 denotes that, gravitational potential energy of the object at, infinity. The total energy of the projectile at, infinity then is, , mV f2, , (8.26), 2, If the object was thrown initially with a speed, Vi from a point at a distance (h+RE) from the, centre of the earth (RE = radius of the earth), its, energy initially was, E (h + R E ) =, , ( ), , GmM E, 1, mVi2 –, + W1, 2, (h + R E ), , (8.27), , By the principle of energy conservation, Eqs. (8.26) and (8.27) must be equal. Hence, 2, , mV f, mVi2, GmM E, –, =, 2, (h + R E ), 2, , (8.28), , min, , =, , GmM E, h + RE, , (8.30), , If the object is thrown from the surface of, the earth, h = 0, and we get, , (Vi )min, , 8.8 ESCAPE SPEED, , E ( ∞) = W1 +, , 1, m Vi2, 2, , =, , 2GM E, RE, , (8.31), , Using the relation g = GM E / RE2 , we get, , (Vi )min, , = 2gR E, , (8.32), , Using the value of g and RE, numerically, (Vi) min≈11.2 km/s. This is called the escape, speed, sometimes loosely called the escape, velocity., Equation (8.32) applies equally well to an, object thrown from the surface of the moon with, g replaced by the acceleration due to Moon’s, gravity on its surface and rE replaced by the, radius of the moon. Both are smaller than their, values on earth and the escape speed for the, moon turns out to be 2.3 km/s, about five times, smaller. This is the reason that moon has no, atmosphere. Gas molecules if formed on the, surface of the moon having velocities larger than, this will escape the gravitational pull of the, moon., t Example 8.4 Two uniform solid spheres, of equal radii R, but mass M and 4 M have, a centre to centre separation 6 R, as shown, in Fig. 8.10. The two spheres are held fixed., A projectile of mass m is projected from, the surface of the sphere of mass M directly, towards the centre of the second sphere., Obtain an expression for the minimum, speed v of the projectile so that it reaches, the surface of the second sphere., , The R.H.S. is a positive quantity with a, minimum value zero hence so must be the L.H.S., Thus, an object can reach infinity as long as Vi, is such that, mVi2, GmM E, –, ≥0, 2, (h + R E ), , (8.29), , The minimum value of Vi corresponds to the, case when the L.H.S. of Eq. (8.29) equals zero., , Fig. 8.10, , Answer The projectile is acted upon by two, mutually opposing gravitational forces of the two, , 2018-19

Page 194 :
194, , PHYSICS, , spheres. The neutral point N (see Fig. 8.10) is, defined as the position where the two forces, cancel each other exactly. If ON = r, we have, GMm, r, , 2, , =, , 4G M m, , (6 R −r )2, , 2, , (6R – r) = 4r2, 6R – r = ±2r, r = 2R or – 6R., The neutral point r = – 6R does not concern, us in this example. Thus ON = r = 2R. It is, sufficient to project the particle with a speed, which would enable it to reach N. Thereafter,, the greater gravitational pull of 4M would, suffice. The mechanical energy at the surface, of M is, Ei =, , 1, GMm, 4G M m, m v2 −, −, ., 2, R, 5R, , G M m 4G M m, −, ., 2R, 4R, , 2, , 2, , v −, , GM, , −, , R, , 4GM, 5R, , =−, , GM, 2R, , −, , GM, , directed towards the centre. This centripetal force, is provided by the gravitational force, which is, G m ME, (8.34), ( R E + h )2, where ME is the mass of the earth., Equating R.H.S of Eqs. (8.33) and (8.34) and, cancelling out m, we get, G ME, (8.35), (RE + h ), Thus V decreases as h increases. From, equation (8.35),the speed V for h = 0 is, , V 2 (h = 0) = GM / R E = gRE, where we have used the, , R, , or, , (8.36), relation, , g = GM / RE 2 . In every orbit, the satellite, , 2G M  4 1 , v2 =,  − , R  5 2, 1/2, ,  3G M , v =, ,  5R , , (8.33), , V2 =, , From the principle of conservation of, mechanical energy, 1, , mV 2, F(centripetal) = ( R + h ), E, , F(gravitation) =, , At the neutral point N, the speed approaches, zero. The mechanical energy at N is purely, potential., EN = −, , its own axis. Since, 1957, advances in, technology have enabled many countries, including India to launch artificial earth, satellites for practical use in fields like, telecommunication,, geophysics, and, meteorology., We will consider a satellite in a circular orbit, of a distance (RE + h ) from the centre of the earth,, where RE = radius of the earth. If m is the mass, of the satellite and V its speed, the centripetal, force required for this orbit is, , t, , A point to note is that the speed of the projectile, is zero at N, but is nonzero when it strikes the, heavier sphere 4 M. The calculation of this speed, is left as an exercise to the students., 8.9 EARTH SATELLITES, Earth satellites are objects which revolve around, the earth. Their motion is very similar to the, motion of planets around the Sun and hence, Kepler’s laws of planetary motion are equally, applicable to them. In particular, their orbits, around the earth are circular or elliptic. Moon, is the only natural satellite of the earth with a, near circular orbit with a time period of, approximately 27.3 days which is also roughly, equal to the rotational period of the moon about, , 2018-19, , traverses a distance 2π(RE + h) with speed V. Its, time period T therefore is, 2π ( R E + h ) 2π (R E + h )3 / 2, =, T =, (8.37), V, G ME, on substitution of value of V from Eq. (8.35)., Squaring both sides of Eq. (8.37), we get, T 2 = k ( RE + h)3 (where k = 4 π2 / GME), , (8.38), , which is Kepler’s law of periods, as applied to, motion of satellites around the earth. For a, satellite very close to the surface of earth h can, be neglected in comparison to RE in Eq. (8.38)., Hence, for such satellites, T is To, where, T0 = 2π R E / g, , (8.39), , If we substitute the numerical values, g
9.8 m s-2 and RE = 6400 km., we get, 6.4 × 106, s, 9.8, Which is approximately 85 minutes., T0 = 2π

Page 195 :
GRAVITATION, , 195, , t Example 8.5 The planet Mars has two, moons, phobos and delmos. (i) phobos has, a period 7 hours, 39 minutes and an orbital, radius of 9.4 ×103 km. Calculate the mass, of mars. (ii) Assume that earth and mars, move in circular orbits around the sun,, with the martian orbit being 1.52 times, the orbital radius of the earth. What is, the length of the martian year in days ?, Answer (i) We employ Eq. (8.38) with the sun’s, mass replaced by the martian mass Mm, , T, , 2, , 4π, , =, , =, , R, , 4π, G, , 2, , 3, , R, T, , 6.67 × 10, , 2, , 18, , 2, , 3, , -11, , × ( 459 × 60), 3, , 18, , 4 × ( 3.14 ) × ( 9.4 ) × 10, 2, , 6.67 × ( 4.59 × 6) × 10, , -5, , = 6.48 × 10 kg., (ii) Once again Kepler’s third law comes to our, aid,, 3, , R MS, , = 3, 2, TE, R ES, where RMS is the mars -sun distance and RES is, the earth-sun distance., ∴ TM = (1.52)3/2 × 365, = 684 days, We note that the orbits of all planets except, Mercury, Mars and Pluto* are very close to, being circular. For example, the ratio of the, semi-minor to semi-major axis for our Earth, is, b/a = 0.99986., t, t Example 8.6 Weighing the Earth : You, are given the following data: g = 9.81 ms–2,, RE = 6.37×106 m, the distance to the moon, R = 3.84×108 m and the time period of the, moon’s revolution is 27.3 days. Obtain the, mass of the Earth ME in two different ways., , Answer From Eq. (8.12) we have, ME =, , *, , 6.67 × 10, = 5.97× 1024 kg., The moon is a satellite of the Earth. From, the derivation of Kepler’s third law [see Eq., (8.38)], T2 =, , 4π2R 3, G ME, , ME =, , 4π2R 3, G T2, 3, , 4 × 3.14 × 3.14 × ( 3.84 ) × 10, 6.67 × 10, , -11, , 24, , × ( 27.3 × 24 × 60 × 60), , 2, , = 6.02 × 10 kg, Both methods yield almost the same answer,, the difference between them being less than 1%., t, , 2, , 23, , 2, , ), , 24, , 2, , TM, , 6 2, , -11, , =, , 3, , 4 × ( 3.14) × ( 9.4) × 10, , Mm =, , =, , 2, , GM m, , Mm =, , (, , 9.81 × 6.37 × 10, , g R2E, G, , t Example 8.7 Express the constant k of, Eq. (8.38) in days and kilometres. Given, k = 10–13 s2 m–3. The moon is at a distance, of 3.84 × 105 km from the earth. Obtain its, time-period of revolution in days., , Answer Given, k = 10–13 s2 m–3, = 10, , −13, , , , , 1, 1, 2, , , d ,  ( 24 × 60 × 60) 2,   (1 / 1000) 3 km3 , , = 1.33 ×10–14 d2 km–3, Using Eq. (8.38) and the given value of k,, the time period of the moon is, T 2 = (1.33 × 10-14)(3.84 × 105)3, T = 27.3 d, t, Note that Eq. (8.38) also holds for elliptical, orbits if we replace (RE+h) by the semi-major, axis of the ellipse. The earth will then be at one, of the foci of this ellipse., 8.10 ENERGY OF AN ORBITING SATELLITE, Using Eq. (8.35), the kinetic energy of the satellite, in a circular orbit with speed v is, 1, m v2, 2, Gm M E, =, 2(R E + h ) ,, K iE =, , Refer to information given in the Box on Page 182, , 2018-19, , (8.40)

Page 196 :
196, , PHYSICS, , Considering gravitational potential energy at, infinity to be zero, the potential energy at distance, (R +h) from the centre of the earth is, e, , G m ME, P .E = −, (R E + h ), , (8.41), , The K.E is positive whereas the P.E is, negative. However, in magnitude the K.E. is half, the P.E, so that the total E is, , E = K .E + P .E = −, , G m ME, 2( R E + h ), , (8.42), , 8.11, , GEOSTATIONARY, SATELLITES, , AND, , POLAR, , An interesting phenomenon arises if in we, arrange the value of (R + h) such that T in, Eq. (8.37) becomes equal to 24 hours. If the, circular orbit is in the equatorial plane of the, earth, such a satellite, having the same period, as the period of rotation of the earth about its, own axis would appear stationery viewed from, a point on earth. The (R + h) for this purpose, works out to be large as compared to R :, E, , E, , E, , The total energy of an circularly orbiting, satellite is thus negative, with the potential, energy being negative but twice is magnitude of, the positive kinetic energy., When the orbit of a satellite becomes, elliptic, both the K.E. and P.E. vary from point, to point. The total energy which remains, constant is negative as in the circular orbit case., This is what we expect, since as we have, discussed before if the total energy is positive or, zero, the object escapes to infinity. Satellites, are always at finite distance from the earth and, hence their energies cannot be positive or zero., t Example 8.8 A 400 kg satellite is in a circular, orbit of radius 2RE about the Earth. How much, energy is required to transfer it to a circular, orbit of radius 4RE ? What are the changes in, the kinetic and potential energies ?, , 1/ 3, ,  T 2 G ME , RE + h = , , 2,  4π, , , (8.43), , and for T = 24 hours, h works out to be 35800 km., which is much larger than R . Satellites in a, circular orbits around the earth in the, equatorial plane with T = 24 hours are called, Geostationery Satellites. Clearly, since the earth, rotates with the same period, the satellite would, appear fixed from any point on earth. It takes, very powerful rockets to throw up a satellite to, such large heights above the earth but this has, been done in view of the several benefits of many, practical applications., E, , Answer Initially,, Ei = −, , G ME m, 4 RE, , While finally, Ef = −, , G ME m, 8 RE, , The change in the total energy is, ∆E = Ef – Ei, =, , ∆E =, , G M E m  G M E, =,  R2, 8 RE, , E, ,  m RE, ,  8, , , g m RE 9.81 × 400 × 6.37 × 106, =, = 3.13 × 109 J, 8, 8, , The kinetic energy is reduced and it mimics, ∆E, namely, ∆K = Kf – Ki = – 3.13 × 109 J., The change in potential energy is twice the, change in the total energy, namely, ∆V = Vf – Vi = – 6.25 × 109 J, t, , 2018-19, , Fig. 8.11 A Polar satellite. A strip on earth’s surface, (shown shaded) is visible from the satellite, during one cycle. For the next revolution of, the satellite, the earth has rotated a little, on its axis so that an adjacent strip becomes, visible., , It is known that electromagnetic waves above, a certain frequency are not reflected from, ionosphere. Radio waves used for radio, broadcast which are in the frequency range 2, MHz to 10 MHz, are below the critical frequency., They are therefore reflected by the ionosphere.

Page 197 :
GRAVITATION, , 197, , India’s Leap into Space, India started its space programme in 1962 when Indian National Committee for Space Research was set, up by the Government of India which was superseded by the Indian Space Research Organisation (ISRO), in 1969. ISRO identified the role and importance of space technology in nation’s development and, bringing space to the service of the common man. India launched its first low orbit satellite Aryabhata in, 1975, for which the launch vehicle was provided by the erstwhile Soviet Union. ISRO started employing its, indigenous launching vehicle in 1979 by sending Rohini series of satellites into space from its main, launch site at Satish Dhawan Space Center, Sriharikota, Andhra Pradesh. The tremendous progress in, India’s space programme has made ISRO one of the six largest space agencies in the world. ISRO, develops and delivers application specific satellite products and tools for broadcasts, communication,, weather forecasts, disaster management tools, Geographic Information System, cartography, navigation,, telemedicine, dedicated distance education satellite etc. In order to achieve complete self-reliance in, these applications, cost effective and reliable Polar Satellite Launch Vehicle (PSLV) was developed in, early 1990s. PSLV has thus become a favoured carrier for satellites of various countries, promoting, unprecedented international collaboration. In 2001, the Geosynchronous Satellite Launch Vehicle (GSLV), was developed for launching heavier and more demanding Geosynchronous communication satellites., Various research centers and autonomous institutions for remote sensing, astronomy and astrophysics,, atmospheric sciences and space research are functioning under the aegis of the Department of Space,, Government of India. Success of lunar (Chandrayaan) and inter planetary (Mangalyaan) missions along, with other scientific projects has been landmark achievements of ISRO. Future endeavors of ISRO include human space flight projects, the development of heavy lift launchers, reusable launch vehicles,, semi-cryogenic engines, single and two stage to orbit (SSTO and TSTO) vehicles, development and use of, composite materials for space application etc. In 1984 Rakesh Sharma became the first Indian to go into, outer space aboard in a USSR spaceship. (www.isro.gov.in), , Thus radio waves broadcast from an antenna, can be received at points far away where the, direct wave fail to reach on account of the, curvature of the earth. Waves used in television, broadcast or other forms of communication have, much higher frequencies and thus cannot be, received beyond the line of sight. A Geostationery, satellite, appearing fixed above the broadcasting, station can however receive these signals and, broadcast them back to a wide area on earth., The INSAT group of satellites sent up by India, are one such group of Geostationary satellites, widely used for telecommunications in India., Another class of satellites are called the Polar, satellites (Fig. 8.11). These are low altitude (h l, 500 to 800 km) satellites, but they go around, the poles of the earth in a north-south direction, whereas the earth rotates around its axis in an, east-west direction. Since its time period is, around 100 minutes it crosses any altitude many, times a day. However, since its height h above, the earth is about 500-800 km, a camera fixed, on it can view only small strips of the earth in, one orbit. Adjacent strips are viewed in the next, orbit, so that in effect the whole earth can be, viewed strip by strip during the entire day. These, satellites can view polar and equatorial regions, , at close distances with good resolution., Information gathered from such satellites, is extremely useful for remote sensing,, meterology as well as for environmental studies, of the earth., 8.12 WEIGHTLESSNESS, Weight of an object is the force with which the, earth attracts it. We are conscious of our own, weight when we stand on a surface, since the, surface exerts a force opposite to our weight to, keep us at rest. The same principle holds good, when we measure the weight of an object by a, spring balance hung from a fixed point e.g. the, ceiling. The object would fall down unless it is, subject to a force opposite to gravity. This is, exactly what the spring exerts on the object. This, is because the spring is pulled down a little by, the gravitational pull of the object and in turn the, spring exerts a force on the object vertically upwards., Now, imagine that the top end of the balance, is no longer held fixed to the top ceiling of the, room. Both ends of the spring as well as the, object move with identical acceleration g. The, spring is not stretched and does not exert any, upward force on the object which is moving down, with acceleration g due to gravity. The reading, , 2018-19

Page 198 :
198, , PHYSICS, , recorded in the spring balance is zero since the, spring is not stretched at all. If the object were, a human being, he or she will not feel his weight, since there is no upward force on him. Thus,, when an object is in free fall, it is weightless and, this phenomenon is usually called the, phenomenon of weightlessness., In a satellite around the earth, every part, and parcel of the satellite has an acceleration, towards the centre of the earth which is exactly, , the value of earth’s acceleration due to gravity, at that position. Thus in the satellite everything, inside it is in a state of free fall. This is just as if, we were falling towards the earth from a height., Thus, in a manned satellite, people inside, experience no gravity. Gravity for us defines the, vertical direction and thus for them there are no, horizontal or vertical directions, all directions are, the same. Pictures of astronauts floating in a, satellite show this fact., , SUMMARY, 1. Newton’s law of universal gravitation states that the gravitational force of attraction, between any two particles of masses m1 and m2 separated by a distance r has the magnitude, , F =G, , m1m 2, r, , 2, , where G is the universal gravitational constant, which has the value 6.672 ×10–11 N m2 kg–2., 2. If we have to find the resultant gravitational force acting on the particle m due to a, number of masses M1, M2, ….Mn etc. we use the principle of superposition. Let F1, F2, ….Fn, be the individual forces due to M1, M2, ….Mn, each given by the law of gravitation. From, the principle of superposition each force acts independently and uninfluenced by the, other bodies. The resultant force FR is then found by vector addition, n, , FR = F1 + F2 + ……+ Fn =, , ∑ Fi, i =1, , where the symbol ‘Σ’ stands for summation., 3. Kepler’s laws of planetary motion state that, (a) All planets move in elliptical orbits with the Sun at one of the focal points, (b) The radius vector drawn from the Sun to a planet sweeps out equal areas in equal, time intervals. This follows from the fact that the force of gravitation on the planet is, central and hence angular momentum is conserved., (c) The square of the orbital period of a planet is proportional to the cube of the semimajor axis of the elliptical orbit of the planet, The period T and radius R of the circular orbit of a planet about the Sun are related, by, ,  4 π2, T2 = , G M, s, , ,  3, R, , , , where Ms is the mass of the Sun. Most planets have nearly circular orbits about the, Sun. For elliptical orbits, the above equation is valid if R is replaced by the semi-major, axis, a., 4. The acceleration due to gravity., (a) at a height h above the earth’s surface, , g(h ) =, , ≈, , G ME, R E2, , G ME, , (RE, , + h), , 2, , , 2h , 1 − R , E, , for h << RE, , , 2h , g(h ) = g (0) 1 −, R E , , , 2018-19, , where g (0) =, , G ME, R E2

Page 199 :
GRAVITATION, , 199, , (b) at depth d below the earth’s surface is, , g (d ) =, , G ME, R E2, , , d , 1 − R  = g (0 ), E, , , d , 1 − R , E, , 5. The gravitational force is a conservative force, and therefore a potential energy function, can be defined. The gravitational potential energy associated with two particles separated, by a distance r is given by, G m1 m 2, r, where V is taken to be zero at r → ∞. The total potential energy for a system of particles, is the sum of energies for all pairs of particles, with each pair represented by a term of, the form given by above equation. This prescription follows from the principle of, superposition., 6. If an isolated system consists of a particle of mass m moving with a speed v in the, vicinity of a massive body of mass M, the total mechanical energy of the particle is given by, V =−, , 1, GMm, m v2 −, 2, r, That is, the total mechanical energy is the sum of the kinetic and potential energies., The total energy is a constant of motion., 7. If m moves in a circular orbit of radius a about M, where M >> m, the total energy of the system is, E=, , GMm, 2a, with the choice of the arbitrary constant in the potential energy given in the point 5.,, above. The total energy is negative for any bound system, that is, one in which the orbit, is closed, such as an elliptical orbit. The kinetic and potential energies are, GMm, K=, 2a, E =−, , GMm, a, 8. The escape speed from the surface of the earth is, V =−, , ve =, , 2 G ME, =, RE, , 2 gRE, , and has a value of 11.2 km s–1., 9. If a particle is outside a uniform spherical shell or solid sphere with a spherically symmetric, internal mass distribution, the sphere attracts the particle as though the mass of the, sphere or shell were concentrated at the centre of the sphere., 10. If a particle is inside a uniform spherical shell, the gravitational force on the particle is zero., If a particle is inside a homogeneous solid sphere, the force on the particle acts toward the, centre of the sphere. This force is exerted by the spherical mass interior to the particle., 11. A geostationary (geosynchronous communication) satellite moves in a circular orbit in, the equatorial plane at a approximate distance of 4.22 × 104 km from the earth’s centre., , 2018-19

Page 200 :
200, , PHYSICS, , POINTS TO PONDER, 1. In considering motion of an object under the gravitational influence of another object, the following quantities are conserved:, (a) Angular momentum, (b) Total mechanical energy, Linear momentum is not conserved, 2. Angular momentum conservation leads to Kepler’s second law. However, it is not special, to the inverse square law of gravitation. It holds for any central force., 3. In Kepler’s third law (see Eq. (8.1) and T2 = KS R3. The constant KS is the same for all, planets in circular orbits. This applies to satellites orbiting the Earth [(Eq. (8.38)]., 4. An astronaut experiences weightlessness in a space satellite. This is not because the, gravitational force is small at that location in space. It is because both the astronaut, and the satellite are in “free fall” towards the Earth., 5. The gravitational potential energy associated with two particles separated by a distance, r is given by, , V =–, , G m1 m 2, + constant, r, , The constant can be given any value. The simplest choice is to take it to be zero. With, this choice, , V =–, , 6., , 7., , 8., , 9., , G m1 m 2, r, , This choice implies that V → 0 as r → ∞. Choosing location of zero of the gravitational, energy is the same as choosing the arbitrary constant in the potential energy. Note that, the gravitational force is not altered by the choice of this constant., The total mechanical energy of an object is the sum of its kinetic energy (which is always, positive) and the potential energy. Relative to infinity (i.e. if we presume that the potential, energy of the object at infinity is zero), the gravitational potential energy of an object is, negative. The total energy of a satellite is negative., The commonly encountered expression m g h for the potential energy is actually an, approximation to the difference in the gravitational potential energy discussed in the, point 6, above., Although the gravitational force between two particles is central, the force between two, finite rigid bodies is not necessarily along the line joining their centre of mass. For a, spherically symmetric body however the force on a particle external to the body is as if, the mass is concentrated at the centre and this force is therefore central., The gravitational force on a particle inside a spherical shell is zero. However, (unlike a, metallic shell which shields electrical forces) the shell does not shield other bodies outside, it from exerting gravitational forces on a particle inside. Gravitational shielding is not, possible., , 8.1, , EXERCISES, Answer the following :, (a) You can shield a charge from electrical forces by putting it inside a hollow conductor., Can you shield a body from the gravitational influence of nearby matter by putting, it inside a hollow sphere or by some other means ?, (b) An astronaut inside a small space ship orbiting around the earth cannot detect, gravity. If the space station orbiting around the earth has a large size, can he hope, to detect gravity ?, (c) If you compare the gravitational force on the earth due to the sun to that due, to the moon, you would find that the Sun’s pull is greater than the moon’s pull., (you can check this yourself using the data available in the succeeding exercises)., However, the tidal effect of the moon’s pull is greater than the tidal effect of sun., Why ?, , 2018-19

Page 201 :
GRAVITATION, , 201, , Choose the correct alternative :, (a) Acceleration due to gravity increases/decreases with increasing altitude., (b) Acceleration due to gravity increases/decreases with increasing depth (assume the, earth to be a sphere of uniform density)., (c) Acceleration due to gravity is independent of mass of the earth/mass of the body., (d) The formula –G Mm(1/r 2 – 1/r 1) is more/less accurate than the formula, mg(r2 – r1) for the difference of potential energy between two points r2 and r1 distance, away from the centre of the earth., 8.3 Suppose there existed a planet that went around the sun twice as fast as the earth., What would be its orbital size as compared to that of the earth ?, 8.4 Io, one of the satellites of Jupiter, has an orbital period of 1.769 days and the radius, of the orbit is 4.22 × 108 m. Show that the mass of Jupiter is about one-thousandth, that of the sun., 8.5 Let us assume that our galaxy consists of 2.5 × 1011 stars each of one solar mass. How, long will a star at a distance of 50,000 ly from the galactic centre take to complete one, revolution ? Take the diameter of the Milky Way to be 105 ly., 8.6 Choose the correct alternative:, (a) If the zero of potential energy is at infinity, the total energy of an orbiting satellite, is negative of its kinetic/potential energy., (b) The energy required to launch an orbiting satellite out of earth’s gravitational, influence is more/less than the energy required to project a stationary object at, the same height (as the satellite) out of earth’s influence., 8.2, , 8.7, , Does the escape speed of a body from the earth depend on (a) the mass of the body, (b), the location from where it is projected, (c) the direction of projection, (d) the height of, the location from where the body is launched?, , 8.8 A comet orbits the sun in a highly elliptical orbit. Does the comet have a constant (a), linear speed, (b) angular speed, (c) angular momentum, (d) kinetic energy, (e) potential, energy, (f) total energy throughout its orbit? Neglect any mass loss of the comet when, it comes very close to the Sun., 8.9 Which of the following symptoms is likely to afflict an astronaut in space (a) swollen, feet, (b) swollen face, (c) headache, (d) orientational problem., 8.10 In the following two exercises, choose the correct answer from among the given ones:, The gravitational intensity at the centre of a hemispherical shell of uniform mass, density has the direction indicated by the arrow (see Fig 8.12) (i) a, (ii) b, (iii) c, (iv) 0., , Fig. 8.12, , For the above problem, the direction of the gravitational intensity at an arbitrary, point P is indicated by the arrow (i) d, (ii) e, (iii) f, (iv) g., 8.12 A rocket is fired from the earth towards the sun. At what distance from the earth’s, centre is the gravitational force on the rocket zero ? Mass of the sun = 2×1030 kg,, mass of the earth = 6×1024 kg. Neglect the effect of other planets etc. (orbital radius =, 1.5 × 1011 m)., 8.13 How will you ‘weigh the sun’, that is estimate its mass? The mean orbital radius of, the earth around the sun is 1.5 × 108 km., 8.14 A saturn year is 29.5 times the earth year. How far is the saturn from the sun if the, earth is 1.50 × 108 km away from the sun ?, 8.15 A body weighs 63 N on the surface of the earth. What is the gravitational force on it, due to the earth at a height equal to half the radius of the earth ?, 8.16 Assuming the earth to be a sphere of uniform mass density, how much would a body, 8.11, , 2018-19

Page 202 :
202, , PHYSICS, , weigh half way down to the centre of the earth if it weighed 250 N on the surface ?, A rocket is fired vertically with a speed of 5 km s-1 from the earth’s surface. How far, from the earth does the rocket go before returning to the earth ? Mass of the earth, = 6.0 × 1024 kg; mean radius of the earth = 6.4 × 106 m; G = 6.67 × 10–11 N m2 kg–2., 8.18 The escape speed of a projectile on the earth’s surface is 11.2 km s–1. A body is, projected out with thrice this speed. What is the speed of the body far away from the, earth? Ignore the presence of the sun and other planets., 8.19 A satellite orbits the earth at a height of 400 km above the surface. How much, energy must be expended to rocket the satellite out of the earth’s gravitational, influence? Mass of the satellite = 200 kg; mass of the earth = 6.0×1024 kg; radius of, the earth = 6.4 × 106 m; G = 6.67 × 10–11 N m2 kg–2., 8.20 Two stars each of one solar mass (= 2×1030 kg) are approaching each other for a head, on collision. When they are a distance 109 km, their speeds are negligible. What is, the speed with which they collide ? The radius of each star is 104 km. Assume the, stars to remain undistorted until they collide. (Use the known value of G)., 8.21 Two heavy spheres each of mass 100 kg and radius 0.10 m are placed 1.0 m apart, on a horizontal table. What is the gravitational force and potential at the mid point, of the line joining the centres of the spheres ? Is an object placed at that point in, equilibrium? If so, is the equilibrium stable or unstable ?, , 8.17, , Additional Exercises, 8.22 As you have learnt in the text, a geostationary satellite orbits the earth at a height of, nearly 36,000 km from the surface of the earth. What is the potential due to earth’s, gravity at the site of this satellite ? (Take the potential energy at infinity to be zero)., Mass of the earth = 6.0×1024 kg, radius = 6400 km., 8.23 A star 2.5 times the mass of the sun and collapsed to a size of 12 km rotates with a, speed of 1.2 rev. per second. (Extremely compact stars of this kind are known as, neutron stars. Certain stellar objects called pulsars belong to this category). Will an, object placed on its equator remain stuck to its surface due to gravity ? (mass of the, sun = 2×1030 kg)., 8.24 A spaceship is stationed on Mars. How much energy must be expended on the, spaceship to launch it out of the solar system ? Mass of the space ship = 1000 kg;, mass of the sun = 2×1030 kg; mass of mars = 6.4×1023 kg; radius of mars = 3395 km;, radius of the orbit of mars = 2.28 ×108 km; G = 6.67×10-11 N m2 kg–2., 8.25 A rocket is fired ‘vertically’ from the surface of mars with a speed of 2 km s–1. If 20%, of its initial energy is lost due to martian atmospheric resistance, how far will the, rocket go from the surface of mars before returning to it ? Mass of mars = 6.4×1023 kg;, radius of mars = 3395 km; G = 6.67×10-11 N m2 kg–2., , 2018-19

Page 207 :
ANSWERS, , 207, , APPENDICES, , APPENDIX A 1, THE GREEK ALPHABET, , APPENDIX A 2, COMMON SI PREFIXES AND SYMBOLS FOR MULTIPLES AND SUB-MULTIPLES, , 2018-19

Page 208 :
208, , PHYSICS, , APPENDIX A 3, SOME IMPORTANT CONSTANTS, , Other useful constants, , 2018-19

Page 209 :
APPENDICES, , 209, , APPENDIX A 4, CONVERSION FACTORS, Conversion factors are written as equations for simplicity., , Length, , Angle and Angular Speed, , 1 km = 0.6215 mi, , π rad = 180°, , 1mi = 1.609 km, , 1 rad = 57.30°, , 1m = 1.0936 yd = 3.281 ft = 39.37 in, , 1° = 1.745 × 10–2 rad, , 1 in = 2.54 cm, , 1 rev min–1 = 0.1047 rad s–1, , 1 ft = 12 in = 30.48 cm, , 1 rad s–1 = 9.549 rev min–1, Mass, , 1 yd = 3ft = 91.44 cm, 15, , 1 lightyear = 1 ly = 9.461 x 10 m, , 1 kg = 1000 g, , °, , 1 A = 0.1nm, , 1 tonne = 1000 kg = 1 Mg, , Area, , 1 u = 1.6606 × 10–27 kg, , 1 m2 = 104 cm2, , 1 kg = 6.022 × 1026 u, , 1km2 = 0.3861 mi2 = 247.1 acres, 1 in2= 6.4516 cm2, , 1 slug = 14.59 kg, 1 kg = 6.852 × 10–2 slug, , 1ft2= 9.29 x 10-2m2, 1 m2= 10.76 ft2, , 1 u = 931.50 MeV/c2, Density, , 1 acre = 43,560 ft2, 1 mi2= 460 acres = 2.590 km2, , 1 g cm–3 = 1000 kg m–3 = 1 kg L–1, Force, , Volume, , 1 N = 0.2248 lbf = 105 dyn, , 1m3= 106cm3, , 1 lbf = 4.4482 N, 3, , -3, , 1 L = 1000 cm = 10, , 3, , m, , 1 kgf = 2.2046 lbf, , 1 gal = 3.786 L, 1 gal = 4 qt = 8 pt = 128 oz = 231 in3, , Time, 1 h = 60 min = 3.6 ks, , 1 in3 = 16.39 cm3, 1ft3 = 1728 in3 = 28.32 L = 2.832 × 104 cm3, , 1 d = 24 h = 1440 min = 86.4 ks, 1y = 365.24 d = 31.56 Ms, , Speed, , Pressure, –1, , 1 km h, , –1, , = 0.2778 m s, , = 0.6215 mi h, , 1mi h–1 = 0.4470 m s–1 = 1.609 km h–1, –1, , 1mi h, , –1, , = 1.467 ft s, , –1, , 1 Pa = 1 N m–2, 1 bar = 100 kPa, 1 atm = 101.325 kPa = 1.01325 bar, 1atm = 14.7 lbf/in2 = 760 mm Hg, , Magnetic Field, 1 G = 10–4 T, , = 29.9 in Hg = 33.8 ft H2O, –2, , 1 T = 1 Wb m, , 4, , = 10 G, , 1 lbf in–2 = 6.895 kPa, 1 torr = 1mm Hg = 133.32 Pa, , 2018-19

Page 210 :
210, , PHYSICS, , Energy, , Power, , 1 kW h = 3.6 MJ, , 1 horsepower (hp) = 550 ft lbf/s, , 1 cal = 4.186 J, , = 745.7 W, –3, , 1ft lbf = 1.356 J = 1.286 × 10, , 1 Btu min–1 = 17.58 W, , Btu, , 1 W = 1.341 × 10–3 hp, , 1 L atm = 101.325 J, 1 L atm = 24.217 cal, , = 0.7376 ft lbf/s, Thermal Conductivity, , 1 Btu = 778 ft lb = 252 cal = 1054.35 J, –19, , 1 eV = 1.602 × 10, , 1 W m–1 K–1 = 6.938 Btu in/hft2 °F, , J, , 1 u c2 = 931.50 MeV, , 1 Btu in/hft2 °F = 0.1441 W/m K, , 1 erg = 10–7J, APPENDIX A 5, MATHEMATICAL FORMULAE, y, r, y, tan θ =, x, r, sec θ =, x, , Geometry, Circle of radius r: circumference = 2πr;, area = πr2, Sphere of radius r: area = 4πr2;, , sin θ =, , 4 3, πr, 3, Right circular cylinder of radius r, and height h: area = 2π r 2 +2π r h;, , volume =, , 2, , x, r, x, cot θ =, y, r, csc θ =, y, , cos θ =, , Pythagorean Theorem, In this right triangle, a2 + b2 = c2, , volume = π r h ;, Triangle of base a and altitude h., 1, ah, 2, Quadratic Formula, , area =, , If, , ax2 + bx + c = 0,, , then, , − b ± b 2 − 4 ac, x=, 2a, Fig. A 5.2, , Trigonometric Functions of Angle θ, Triangles, , Angles are A, B, C, Opposite sides are a, b, c, Angles A + B + C = 1800, sin A sin B sin C, =, =, a, b, c, , c2 = a2 + b2 – 2ab cos C, Exterior angle D = A + C, , Fig. A 5.1, , 2018-19

Page 212 :
212, , PHYSICS, , Let a, b and c be arbitary vectors with, magnitudes a, b and c. Then, , a × b = ab sin θ, , a × ( b + c) = ( a × b ) + ( a × c), , ( sa) × b = a × ( sb) = s(a × b) (s is a scalar), , ˆi, a × b = − b × a = ax, bx, , Let θ be the smaller of the two angles, between a and b. Then, , ˆ, = a y bz − bya z ˆi + (a z bx − bz a x ) ˆj + a x by − bx a y k, , (, , ˆj, ay, by, , ˆ, k, az, bz, , ), , a . (b × c) = b. (c × a) = c . (a × b), a ⋅ b = b ⋅ a = a x b x + a y by + a z bz = ab cosθ, , a × (b × c) = (a . c) b – (a . b) c, , APPENDIX A 6, SI DERIVED UNITS, A 6.1 Some SI Derived Units expressed in SI Base Units, , 2018-19, , (, , )

Page 213 :
APPENDICES, , 213, , A 6.2 SI Derived Units with special names, , pascal, , A 6.3 Some SI Derived Units expressed by means of SI Units with special names, , 2018-19

Page 214 :
214, , PHYSICS, , Absorbed dose rate, , APPENDIX A 7, GENERAL GUIDELINES FOR USING SYMBOLS FOR PHYSICAL QUANTITIES, CHEMICAL, ELEMENTS AND NUCLIDES, •, , •, , •, •, , Symbols for physical quantities are normally single letters and printed in italic (or sloping) type., However, in case of the two letter symbols, appearing as a factor in a product, some spacing is, necessary to separate this symbol from other symbols., Abbreviations, i.e., shortened forms of names or expressions, such as p.e. for potential energy,, are not used in physical equations. These abbreviations in the text are written in ordinary, normal/roman (upright) type., Vectors are printed in bold and normal/roman (upright) type. However, in class room situations,, vectors may be indicated by an arrow on the top of the symbol., Multiplication or product of two physical quantities is written with some spacing between them., Division of one physical quantity by another may be indicated with a horizontal bar or with, , 2018-19

Page 215 :
APPENDICES, , •, , •, , •, , 215, , solidus, a slash or a short oblique stroke mark (/) or by writing it as a product of the, numerator and the inverse first power of the denominator, using brackets at appropriate, places to clearly distinguish between the numerator and the denominator., Symbols for chemical elements are written in normal/roman (upright) type. The symbol is, not followed by a full stop., For example, Ca, C, H, He, U, etc., The attached numerals specifying a nuclide are placed as a left subscript (atomic number), and superscript (mass number)., For example, a U-235 nuclide is expressed as 235, (with 235 expressing the mass number, 92 U, and 92 as the atomic number of uranium with chemical symbol U)., The right superscript position is used, if required, for indicating a state of ionisation (in, case of ions)., , For example, Ca2+, PO34−, APPENDIX A 8, GENERAL GUIDELINES FOR USING SYMBOLS FOR SI UNITS, SOME OTHER UNITS, AND, SI PREFIXES, •, , Symbols for units of physical quantities are printed/written in Normal/Roman (upright) type., , •, , Standard and recommended symbols for units are written in lower case roman (upright), type, starting with small letters. The shorter designations for units such as kg, m, s, cd,, etc., are symbols and not the abbreviations. The unit names are never capitalised. However,, the unit symbols are capitalised only if the symbol for a unit is derived from a proper name, of scientist, beginning with a capital, normal/roman letter., For example, m for the unit ‘metre’, d for the unit ‘day’, atm for the unit ‘atmospheric, pressure’, Hz for the unit ‘hertz’, Wb for the unit ‘weber’, J for the unit ‘joule’, A for the unit, ‘ampere’, V for the unit ‘volt’, etc. The single exception is L, which is the symbol for the, unit ‘litre’. This exception is made to avoid confusion of the lower case letter l with the, Arabic numeral l., , •, , Symbols for units do not contain any final full stop at the end of recommended letter and, remain unaltered in the plural, using only singular form of the unit., For example, for a length of 25 centimetres the unit symbol is written as 25 cm, and not 25 cms or 25 cm. or 25 cms., etc., , •, , Use of solidus ( / ) is recommended only for indicating a division of one letter unit symbol by, another unit symbol. Not more than one solidus is used., For example :, m/s2 or m s–2 (with a spacing between m and s–2) but not m/s/s;, 1 Pl =1 N s m –2 = 1 N s/m2 = 1 kg/s m=1 kg m–1 s–1, but not 1 kg/m/s;, J/K mol or J K–1 mol–1, but not J/K/mol; etc., , •, , Prefix symbols are printed in normal/roman (upright) type without spacing between the, prefix symbol and the unit symbol. Thus certain approved prefixes written very close to the, unit symbol are used to indicate decimal fractions or multiples of a SI unit, when it is, inconveniently small or large., For example :, megawatt ( 1MW = 106 W);, nanosecond (1 ns = 10–9 s);, –2, centimetre (1 cm = 10 m);, picofarad (1 pF = 10–12 F);., 3, kilometre ( 1 km = 10 m);, microsecond (1µs = 10–6 s);, –3, millivolt (1 mV= 10 V);, gigahertz (1GHz = 109 Hz);, , 2018-19

Page 216 :
216, , PHYSICS, , kilowatt-hour (1 kW h = 103 W h = 3.6 MJ = 3.6 × 106 J);, microampere (1µ A = 10–6 A); micron (1µm = 10–6 m);, angstrom (1 Α° =0.1 nm = 10–10 m); etc., The unit ‘micron’ which equals 10–6 m, i.e. a micrometre, is simply the name given to, convenient sub-multiple of the metre. In the same spirit, the unit ‘fermi’, equal to a, femtometre or 10–15 m has been used as the convenient length unit in nuclear studies., Similarly, the unit ‘barn’, equal to 10–28 m2, is a convenient measure of cross-sectional, areas in sub-atomic particle collisions. However, the unit ‘micron’ is preferred over the, unit ‘micrometre’ to avoid confusion of the ‘micrometre’ with the length measuring, instrument called ‘micrometer’. These newly formed multiples or sub-multiples (cm, km,, µm, µs, ns) of SI units, metre and second, constitute a new composite inseparable symbol, for units., •, , When a prefix is placed before the symbol of a unit, the combination of prefix and symbol is, considered as a new symbol, for the unit, which can be raised to a positive or negative, power without using brackets. These can be combined with other unit symbols to form, compound unit. Rules for binding-in indices are not those of ordinary algebra., For example :, cm3 means always (cm)3 = (0.01 m)3 = (10–2 m)3 = 10–6 m3, but never 0.01 m3 or, 10–2 m3 or 1cm3 (prefix c with a spacing with m3 is meaningless as prefix c is to be attached, to a unit symbol and it has no physical significance or independent existence without, attachment with a unit symbol)., Similarly, mA2 means always (mA)2= (0.001A)2 = (10–3 A)2 =10–6 A2, but never 0.001 A2 or, 10–3 A2 or m A2;, 1 cm–1 = (10–2m)–1=102 m–1, but not 1c m–1 or 10–2 m–1;, 1µs–1 means always (10–6s)–1=106 s–1, but not 1 × 10–6 s–1;, 1 km2 means always (km)2 = (103 m)2=106 m2, but not 103 m2;, 1mm2 means always (mm)2= (10–3 m)2=10–6 m2, but not 10–3 m2., , •, , A prefix is never used alone. It is always attached to a unit symbol and written or fixed, before (pre-fix) the unit symbol., For example :, 103/m3 means 1000/m3 or 1000 m-3, but not k/m3 or k m-3., 106/m3 means 10,00,000/m3 or 10,00,000 m–3, but not M/m3 or M m–3, , •, , Prefix symbol is written very close to the unit symbol without spacing between them, while, unit symbols are written separately with spacing when units are multiplied together., For example :, m s-1 (symbols m and s–1, in lower case, small letter m and s, are separate and independent, unit symbols for metre and second respectively, with spacing between them) means ‘metre, per second’, but not ‘milli per second’., Similarly, ms–1 [symbol m and s are written very close to each other, with prefix symbol m, (for prefix milli) and unit symbol s, in lower case, small letter (for unit ‘second’) without, any spacing between them and making ms as a new composite unit] means ‘per millisecond’,, but never ‘metre per second’., mS–1[symbol m and S are written very close to each other, with prefix symbol m (for prefix, milli) and unit symbol S, in capital roman letter S (for unit ‘siemens’) without any spacing, between them, and making mS as a new composite unit] means ‘per millisiemens’, but, never ‘per millisecond’., C m [symbol C and m are written separately, representing unit symbols C (for unit ‘coulomb’), and m (for unit ‘metre’), with spacing between them] means ‘coulomb metre’, but never, ‘centimetre’, etc., , •, , The use of double prefixes is avoided when single prefixes are available., For example :, , 2018-19

Page 217 :
APPENDICES, , 217, , 10–9 m = 1nm (nanometre), but not 1mµm (millimicrometre),, 10–6 m= 1µm (micron), but not 1mmm(millimillimetre),, 10–12 F= 1 pF (picofarad), but not 1µµF (micromicrofarad),, 109 W=1 GW (giga watt), but not 1 kMW (kilomegawatt), etc., •, , The use of a combination of unit and the symbols for units is avoided when the physical quantity, is expressed by combining two or more units., For example :, joule per mole kelvin is written as J/mol K or J mol–1 K–1, but not joule/mole K or, J/ mol kelvin or J/mole K, etc., joule per tesla is written as J/T or J T–1, but not joule /T or J per tesla or J/tesla, etc., newton metre second is written as N m s, but not Newton m second or N m second or N metre s, or newton metre s, etc., joule per kilogram kelvin is written as J/kg K or J kg–1 K–1, but not J/kilog K or joule/kg K or J/, kg kelvin or J/kilogram K, etc., , •, , To simplify calculations, the prefix symbol is attached to the unit symbol in the numerator and, not to the denominator., For example :, 106 N/m2 is written more conveniently as MN/m2, in preference to N/mm2., A preference has been expressed for multiples or sub-multiples involving the factor 1000, 10+3n, where n is the integer., , •, , Proper care is needed when same symbols are used for physical quantities and units of physical, quantities., For example :, The physical quantity weight (W) expressed as a product of mass (m) and acceleration due to, gravity (g) may be written in terms of symbols W, m and g printed in italic ( or sloping) type as W, = m g, preferably with a spacing between m and g. It should not be confused with the unit, symbols for the units watt (W), metre (m) and gram (g). However, in the equation W=m g, the, symbol W expresses the weight with a unit symbol J, m as the mass with a unit symbol kg and, g as the acceleration due to gravity with a unit symbol m/s2. Similarly, in equation F = m a, the, symbol F expresses the force with a unit symbol N, m as the mass with a unit symbol kg, and a, as the acceleration with a unit symbol m/s2. These symbols for physical quantities should not, be confused with the unit symbols for the units ‘farad’ (F), ‘metre’(m) and ‘are’ (a)., Proper distinction must be made while using the symbols h (prefix hecto, and unit hour), c, (prefix centi, and unit carat), d (prefix deci and unit day), T (prefix tera, and unit tesla), a (prefix, atto, and unit are), da (prefix deca, and unit deciare), etc., , •, , SI base unit ‘kilogram’ for mass is formed by attaching SI prefix (a multiple equal to 103) ‘kilo’ to, a cgs (centimetre, gram, second) unit ‘gram’ and this may seem to result in an anomaly. Thus,, while a thousandth part of unit of length (metre) is called a millimetre (mm), a thousandth part, of the unit of mass (kg) is not called a millikilogram, but just a gram. This appears to give the, impression that the unit of mass is a gram (g) which is not true. Such a situation has arisen, because we are unable to replace the name ‘kilogram’ by any other suitable unit. Therefore, as, an exception, name of the multiples and sub-multiples of the unit of mass are formed by attaching, prefixes to the word ‘gram’ and not to the word ‘kilogram’., For example :, 103 kg =1 megagram ( 1Mg), but not 1 kilo kilogram (1 kkg);, 10–6 kg = 1 milligram ( 1 mg), but not 1 microkilogram ( 1µkg);, 10–3 kg = 1 gram (1g), but not 1 millikilogram (1 mkg), etc., , It may be emphasised again that you should use the internationally approved and recommended, symbols only. Continual practice of following general rules and guidelines in unit symbol writing, would make you learn mastering the correct use of SI units, prefixes and related symbols for physical, quantities in a proper perspective., , 2018-19

Page 218 :
218, , PHYSICS, , APPENDIX A 9, DIMENSIONAL FORMULAE OF PHYSICAL QUANTITIES, , 2018-19

Page 219 :
APPENDICES, , 219, , 2018-19

Page 220 :
220, , PHYSICS, , 2018-19

Page 221 :
APPENDICES, , 221, , 2018-19

Page 222 :
222, , PHYSICS, , 2018-19

Page 223 :
ANSWERS, , 223, , ANSWERS, , Chapter 2, 2.1, , (a) 10–6 ; (b) 1.5 × 104 ; (c) 5 ; (d) 11.3, 1.13 × 104., , 2.2, , (a) 107 ;, , 2.5, , 500, , 2.6, , (c), , 2.7, , 0.035 mm, , 2.9, , 94.1, , 2.10, , (a) 1 ; (b) 3 ; (c) 4 ; (d) 4 ; (e) 4 ; (f) 4., , 2.11, , 8.72 m2; 0.0855 m3, , 2.12, , (a) 2.3 kg ; (b) 0.02 g, , 2.13, , 13%; 3.8, , 2.14, , (b) and (c) are wrong on dimensional grounds. Hint: The argument of a trigonometric, function must always be dimensionless., , 2.15, , The correct formula is m = m0 (1 – v2/c2)–½, , 2.16, , ≅ 3 × 10–7 m3, , 2.17, , ≅ 104; intermolecular separation in a gas is much larger than the size of a molecule., , 2.18, , Near objects make greater angle than distant (far off) objects at the eye of the observer., When you are moving, the angular change is less for distant objects than nearer objects., So, these distant objects seem to move along with you, but the nearer objects in opposite, direction., , 2.19, , ≅ 3 × 1016 m; as a unit of length 1 parsec is defined to be equal to 3.084 × 1016 m., , 2.20, , 1.32 parsec; 2.64″ (second of arc), , 2.23, , 1.4 × 103 kg m-3; the mass density of the Sun is in the range of densities of liquids /, solids and not gases. This high density arises due to inward gravitational attraction, on outer layers due to inner layers of the Sun., , 2.24, , 1.429 × 105 km, , (b) 10–16 ; (c) 3.9 × 104 ; (d) 6.67 × 10–8., , 2018-19

Page 224 :
224, , PHYSICS, , 2.25, , Hint: tan θ must be dimensionless. The correct formula is tan θ = v/v ′ where v ′ is the, speed of rainfall., , 2.26, , Accuracy of 1 part in 1011 to 1012, , 2.27, , ≅ 0.7 × 103 kg m–3. In the solid phase atoms are tightly packed, so the atomic mass, density is close to the mass density of the solid., , 2.28, , ≅ 0.3 × 1018 kg m–3 – Nuclear density is typically 1015 times atomic density of matter., , 2.29, , 3.84 × 108 m, , 2.30, , 55.8 km, , 2.31, , 2.8 × 1022 km, , 2.32, , 3,581 km, , 2.33, , Hint: the quantity e4/ (16 π 2 ∈20 mp me2 c3 G ) has the dimension of time., Chapter 3, , 3.1, , (a), (b), , 3.2, , (a) A....B, (b) A....B, (c) B....A, (d) Same, (e) B....A....once., , 3.4, , 37 s, , 3.5, , 1000 km/h, , 3.6, , 3.06 m s–2 ; 11.4 s, , 3.7, , 1250 m (Hint: view the motion of B relative to A), , 3.8, , 1 m s–2 (Hint: view the motion of B and C relative to A), , 3.9, , T = 9 min, speed = 40 km/h. Hint: v T / ( v – 20 ) =18; v T / ( v + 20 ) = 6, , 3.10 (a) Vertically downwards; (b) zero velocity, acceleration of 9.8 m s-2 downwards;, (c) x > 0 (upward and downward motion); v < 0 (upward), v > 0 (downward), a > 0, throughout; (d) 44.1 m, 6 s., 3.11 (a) True;, (b) False; (c) True (if the particle rebounds instantly with the same speed, it, implies infinite acceleration which is unphysical); (d) False (true only when the chosen, positive direction is along the direction of motion), 3.14 (a) 5 km h–1, 5 km h–1; (b) 0, 6 km h–1; (c), , 15, , km h–1,, , 45, , km h–1, , 8, 8, 3.15 Because, for an arbitrarily small interval of time, the magnitude of displacement is equal, to the length of the path., , 3.16 All the four graphs are impossible. (a) a particle cannot have two different positions at, the same time; (b) a particle cannot have velocity in opposite directions at the same, time; (c) speed is always non-negative; (d) total path length of a particle can never, decrease with time. (Note, the arrows on the graphs are meaningless)., 3.17 No, wrong. x- t plot does not show the trajectory of a particle. Context: A body is dropped, from a tower (x = 0) at t = 0., 3.18 105 m s-1, , 2018-19

Page 225 :
ANSWERS, , 225, , 3.19 (a) A ball at rest on a smooth floor is kicked, it rebounds from a wall with reduced speed, and moves to the opposite wall which stops it; (b) A ball thrown up with some initial, velocity rebounding from the floor with reduced speed after each hit; (c) A uniformly, moving cricket ball turned back by hitting it with a bat for a very short time-interval., 3.20 x < 0, v < 0, a > 0; x > 0, v > 0, a < 0; x < 0, v > 0, a > 0., 3.21 Greatest in 3, least in 2; v > 0 in 1 and 2, v < 0 in 3., 3.22 Acceleration magnitude greatest in 2; speed greatest in 3; v > 0 in 1, 2 and 3; a > 0 in 1, and 3, a < 0 in 2; a = 0 at A, B, C, D., 3.23 A straight line inclined with the time-axis for uniformly accelerated motion; parallel to, the time- axis for uniform motion., 3.24 10 s, 10 s, 3.25 (a) 13 km h–1 ; (b) 5 km h–1; (c) 20 s in either direction, viewed by any one of the parents,, the speed of the child is 9 km h–1 in either direction; answer to (c) is unaltered., 3.26 x2 – x1 = 15 t (linear part); x2 – x1 = 200 + 30 t – 5 t2 (curved part)., 3.27 (a) 60 m, 6 m s-1 ; (b) 36 m, 9 m s-1, 3.28 (c), (d), (f), Chapter 4, 4.1, , Volume, mass, speed, density, number of moles, angular frequency are scalars; the rest, are vectors., , 4.2, , Work, current, , 4.3, , Impulse, , 4.4, , Only (c) and (d) are permissible, , 4.5, , (a) T, (b) F, (c) F, (d) T, (e) T, , 4.6, , Hint: The sum (difference) of any two sides of a triangle is never less (greater) than the, third side. Equality holds for collinear vectors., , 4.7, , All statements except (a) are correct, , 4.8, , 400 m for each; B, , 4.9, , (a) O; (b) O; (c) 21.4 km h–1, , 4.10 Displacement of magnitude 1 km and direction 60o with the initial direction; total path, length = 1.5 km (third turn); null displacement vector; path length = 3 km (sixth turn);, 866 m, 30o, 4 km (eighth turn), 4.11 (a) 49.3 km h–1 ; (b) 21.4 km h–1. No, the average speed equals average velocity magnitude, only for a straight path., 4.12 About 18o with the vertical, towards the south., 4.13 15 min, 750 m, 4.14 East (approximately), 4.15 150.5 m, 4.16 50 m, , 2018-19

Page 226 :
226, , PHYSICS, , 4.17, , 9.9 m s-2, along the radius at every point towards the centre., , 4.18, , 6.4 g, , 4.19, , (a) False (true only for uniform circular motion), (b) True, (c) True., , 4.20, , (a) v ( t ) = ( 3.0 i − 4.0 t j) a (t ) = − 4.0 j, , (b) 8.54 m s–1, 70° with x-axis., 4.21, , (a) 2 s, 24 m, 21.26 m s–1, , 4.22, , 2 , 45o with the x-axis;, , (, , 2 , – 45o with the x - axis, 5 / 2 , − 1 /, , 4.23, , (b) and (e), , 4.24, , Only (e) is true, , 4.25, , 182 m s–1, , 4.27, , No. Rotations in general cannot be associated with vectors, , 4.28, , A vector can be associated with a plane area, , 4.29, , No, , 4.30, , At an angle of sin-1 (1/3) = 19.5° with the vertical; 16 km., , 4.31, , 0.86 m s–2, 54.5° with the direction of velocity, Chapter, , ), , 2 ., , 5, , 5.1, , (a) to (d) No net force according to the First Law, (e) No force, since it is far away from all material agencies producing electromagnetic, and gravitational forces., , 5.2, , The only force in each case is the force of gravity, (neglecting effects of air) equal to, 0.5 N vertically downward. The answers do not change, even if the motion of the pebble, is not along the vertical. The pebble is not at rest at the highest point. It has a constant, horizontal component of velocity throughout its motion., , 5.3, , (a) 1 N vertically downwards, (b) same as in (a), (c) same as in (a); force at an instant depends on the situation at that instant, not on, history., (d) 0.1 N in the direction of motion of the train., , 5.4, , (i) T, , 5.5, , a = – 2.5 m s–2. Using v = u + at, 0 = 15 – 2.5 t, , 5.6, , a = 1.5/25 = 0.06 m s–2, F = 3 × 0.06 = 0.18 N in the direction of motion., , 5.7, , Resultant force = 10 N at an angle of tan–1 (3/4) = 37° with the direction of 8 N force., Acceleration = 2 m s–2 in the direction of the resultant force., , 5.8, , a = – 2.5 m s–2 , Retarding force = 465 × 2.5 = 1.2 × 103 N, , 5.9, , F – 20,000 × 10 = 20000 × 5.0,, , 5.10, , a = – 20 m s–2, , i.e.,, , i.e., F = 3.0 × 105 N, , 0 ≤ t ≤ 30 s, , 2018-19, , t = 6.0 s

Page 227 :
ANSWERS, , 227, , t = –5 s : x = u t = – 10 × 5 = –50 m, t = 25 s : x = u t + (½) a t2 = (10 × 25 – 10 × 625)m = – 6 km, t = 100 s : First consider motion up to 30 s, x1 = 10 × 30 – 10 × 900 = – 8700 m, At t = 30 s, v = 10 – 20 × 30 = –590 m s-1, For motion from 30 s to 100 s : x2 = – 590 × 70 = – 41300 m, x = x1 + x2 = – 50 km, 5.11, , (a) Velocity of car ( at t = 10 s ) = 0 + 2 × 10 = 20 m s–1, By the First Law, the horizontal component of velocity is 20 m s–1 throughout., Vertical component of velocity (at t = 11s) = 0 + 10 × 1 = 10 m s–1, Velocity of stone (at t = 11s) = 20 2 + 10 2 = 500 = 22.4 m s – 1 at an angle of tan–1 ( ½) with, the horizontal., (b)10 m s-2 vertically downwards., , 5.12, , (a) At the extreme position, the speed of the bob is zero. If the string is cut, it will fall, vertically downwards., (b) At the mean position, the bob has a horizontal velocity. If the string is cut, it will fall, along a parabolic path., , 5.13, , The reading on the scale is a measure of the force on the floor by the man. By the Third, Law, this is equal and opposite to the normal force N on the man by the floor., , 5.14, 5.15, , 5.16, 5.17, 5.18, 5.19, 5.20, , 5.21, , (a) N = 70 × 10 = 700 N ; Reading is 70 kg, (b) 70 × 10 – N = 70 × 5 ; Reading is 35 kg, (c) N – 70 × 10 = 70 × 5 ; Reading is 105 kg, (d) 70 × 10 – N = 70 × 10; Reading would be zero; the scale would read zero., (a) In all the three intervals, acceleration and, therefore, force are zero., (b) 3 kg m s–1 at t = 0 ; (c) –3 kg m s–1 at t = 4 s., If the 20 kg mass is pulled,, 600 – T = 20 a, T = 10 a, a = 20 m s–2,, T = 200 N, If the 10 kg mass is pulled, a = 20 m s–2,, T = 400 N, T – 8 × 10 = 8 a,12 × 10 – T = 12a, i.e. a = 2 m s–2, T = 96 N, By momentum conservation principle, total final momentum is zero. Two momentum, vectors cannot sum to a null momentum unless they are equal and opposite., Impulse on each ball = 0.05 ×12 = 0.6 kg m s-1 in magnitude. The two impulses are, opposite in direction., Use momentum conservation : 100 v = 0.02 × 80, v = 0.016 m s–1 = 1.6 cm s–1, Impulse is directed along the bisector of the initial and final directions. Its magnitude is, 0.15 × 2 × 15 × cos 22.5° = 4.2 kg m s–1, , v = 2π × 1.5 ×, T=, , 40, = 2π m s –1, 60, , mv 2 0.25 × 4π 2, =, = 6.6 N, R, 1.5, , 2018-19

Page 228 :
228, , PHYSICS, , 2, mvmax, , which gives v max = 35 m s –1, R, Alternative (b) is correct, according to the First Law, (a) The horse-cart system has no external force in empty space. The mutual forces, between the horse and the cart cancel (Third Law). On the ground, the contact force, between the system and the ground (friction) causes their motion from rest., , 200 =, , 5.22, 5.23, , (b) Due to inertia of the body not directly in contact with the seat., (c) A lawn mower is pulled or pushed by applying force at an angle. When you push, the, normal force (N ) must be more than its weight, for equilibrium in the vertical direction., This results in greater friction f ( f ∝ N ) and, therefore, a greater applied force to move., Just the opposite happens while pulling., (d) To reduce the rate of change of momentum and hence to reduce the force necessary, to stop the ball., , 5.25, , A body with a constant speed of 1 cm s -1 receives impulse of magnitude, 0.04 kg × 0.02 m s–1 = 8 × 10–4 kg m s–1 after every 2 s from the walls at x = 0 and, x = 2 cm., Net force = 65 kg × 1 m s–2 = 65 N, , 5.26, , amax = µs g = 2 m s–2, Alternative (a) is correct. Note mg + T2 = mv22/R ;, , 5.24, , T1 – mg = mv12/R, , The moral is : do not confuse the actual material forces on a body (tension, gravitational, force, etc) with the effects they produce : centripetal acceleration v22/R or v12/R in this, example., 5.27, , (a) ‘Free body’ : crew and passengers, Force on the system by the floor = F upwards; weight of system = mg downwards;, ∴ F – mg = ma, F – 300 × 10 = 300 × 15, F = 7.5 × 103 N upward, By the Third Law, force on the floor by the crew and passengers = 7.5 × 103 N downwards., (b) ‘Free body’ : helicopter plus the crew and passengers, Force by air on the system = R upwards; weight of system = mg downwards, ∴ R – mg = ma, R – 1300 × 10 = 1300 × 15, R = 3.25 × 104 N upwards, By the Third Law, force (action) on the air by the helicopter = 3.25 × 104 N downwards., (c) 3.25 × 104 N upwards, , 5.28, , Mass of water hitting the wall per second, = 103 kg m–3 × 10–2 m2 × 15 m s–1 = 150 kg s, , –1, , Force by the wall = momentum loss of water per second = 150 kg s–1 × 15 m s-1 = 2.25, × 103 N, 5.29, , (a) 3 m g (down), , 5.30, , If N is the normal force on the wings,, , (b) 3 m g (down), , 2018-19, , (c) 4 m g (up)

Page 229 :
ANSWERS, , 229, , N cos θ = mg,, which give R =, 5.31, , N sin θ =, , mv 2, R, , v2, g tan θ, , =, , 200 × 200, = 15km, 10 × tan15°, , The centripetal force is provided by the lateral thrust by the rail on the flanges of the, wheels. By the Third Law, the train exerts an equal and opposite thrust on the rail, causing its wear and tear., 2, , –1  v, –1  15 × 15 , Angle of banking = tan ,  = tan ,   37°, R, g,  30 × 10 , , , , 5.32, , Consider the forces on the man in equilibrium : his weight, force due to the rope and, normal force due to the floor., (a) 750 N (b) 250 N; mode (b) should be adopted., , 5.33, , (a) T – 400 = 240,, , T = 640 N, , (b) 400 – T = 160,, , T = 240 N, , (c) T = 400 N, (d) T = 0, The rope will break in case (a)., 5.34, , We assume perfect contact between bodies A and B and the rigid partition. In that, case, the self-adjusting normal force on B by the partition (reaction) equals 200 N., There is no impending motion and no friction. The action-reaction forces between A, and B are also 200 N. When the partition is removed, kinetic friction comes into play., Acceleration of A + B = [ 200 – ( 150 × 0.15 ) ] / 15 =11.8 m s–2, Friction on A = 0.15 × 50 = 7.5 N, 200 – 7.5 – FAB = 5 × 11.8, FAB = 1.3 × 102 N; opposite to motion ., FBA = 1.3 × 102 N; in the direction of motion., , 5.35, , (a) Maximum frictional force possible for opposing impending relative motion between, the block and the trolley = 150 × 0.18 = 27 N, which is more than the frictional force of, 15 × 0.5 = 7.5 N needed to accelerate the box with the trolley. When the trolley moves, with uniform velocity, there is no force of friction acting on the block., (b) For the accelerated (non-inertial) observer, frictional force is opposed by the pseudoforce of the same magnitude, keeping the box at rest relative to the observer. When the, trolley moves with uniform velocity there is no pseudo-force for the moving (inertial), observer and no friction., , 5.36, , Acceleration of the box due to friction = µg = 0.15 × 10 = 1.5 m s–2. But the acceleration, of the truck is greater. The acceleration of the box relative to the truck is 0.5 m s-2, towards the rear end. The time taken for the box to fall off the truck =, During this time, the truck covers a distance = ½ × 2 × 20 = 20 m., , 2018-19, , 2×5, = 20 s ., 0.5

Page 230 :
230, , 5.37, , PHYSICS, , For the coin to revolve with the disc, the force of friction should be enough to provide the, , 2π, mv 2, ≤ µ m g . Now v = rω, where ω =, is the angular, r, T, frequency of the disc. For a given µ and ω, the condition is r ≤ µg / ω2. The condition is, satisfied by the nearer coin ( 4 cm from the centre)., , necessary centripetal force, i.e, , 5.38, , mv 2, , where N is the normal force (downwards) on the, R, motorcyclist by the ceiling of the chamber. The minimum possible speed at the uppermost, point corresponds to N = 0., , At the uppermost point, N + mg =, , i.e. v min =, , 5.39, , Rg =, , 25 × 10 = 16 m s –1, , The horizontal force N by the wall on the man provides the needed centripetal force : N, = m R ω2. The frictional force f (vertically upwards) opposes the weight mg. The man, remains stuck to the wall after the floor is removed if mg = f < µ N i.e. mg < µ m R ω2. The, minimum angular speed of rotation of the cylinder is ω min =, , 5.40, , g / µR, , =, , Consider the free-body diagram of the bead when the radius vector joining the centre of, the wire makes an angle θ with the vertical downward direction. We have, mg = N cos θ and m R sin θ ω2 = N sin θ. These equations give cos θ = g/Rω2. Since cos θ ≤ 1,, the bead remains at its lowermost point for ω ≤, , For ω =, , 2g, 1, , cos θ =, 2, R, , g, ., R, , i.e. θ = 60 0 ., , Chapter, , 6, , 6.1, , (a) +ve, , 6.2, , (a) 882 J ; (b) –247 J; (c) 635 J ; (d) 635 J;, Work done by the net force on a body equals change in its kinetic energy., (a) x > a ; 0, (c) x < a, x > b ; - V1, (b) −∞ < x < ∞; V1, (d) - b/2 < x < - a / 2, a / 2 < x < b / 2; -V1, , 6.3, 6.5, , 6.6, , 5 s–1, , (b) –ve, , (c) –ve, , (d) + ve, , (e) – ve, , (a) rocket; (b) For a conservative force work done over a path is minus of change in, potential energy. Over a complete orbit, there is no change in potential energy; (c) K.E., increases, but P.E. decreases, and the sum decreases due to dissipation against friction;, (d) in the second case., (a) decrease; (b) kinetic energy; (c) external force; (d) total linear momentum, and also, total energy (if the system of two bodies is isolated)., , 6.7, 6.8, , (a) F ; (b) F ; (c) F ; (d) F (true usually but not always, why?), (a) No, (b) Yes, (c) Linear momentum is conserved during an inelastic collision, kinetic energy is, of, course, not conserved even after the collision is over., (d) elastic., , 6.9, , (b), , t, , 2018-19

Page 231 :
ANSWERS, , 231, , t3/2, , 6.10, , (c), , 6.11, , 12 J, , 6.12, , The electron is faster, ve / vp = 13.5, , 6.13, , 0.082 J in each half ; – 0.163 J, , 6.14, , 6.15, 6.16, , Yes, momentum of the molecule + wall system is conserved. The wall has a recoil, momentum such that the momentum of the wall + momentum of the outgoing molecule, equals momentum of the incoming molecule, assuming the wall to be stationary initially., However, the recoil momentum produces negligible velocity because of the large mass of, the wall. Since kinetic energy is also conserved, the collision is elastic., 43.6 kW, (b), , 6.17, , It transfers its entire momentum to the ball on the table, and does not rise at all., , 6.18, , 5.3 m s-1, , 6.19, , 27 km h–1 (no change in speed), , 6.20, , 50 J, , 6.21, , (a) m = ρ Avt, , (b) K = ρ Av 3t /2, , 6.22, , (a) 49,000 J, , (b) 6.45 10-3 kg, , 6.23, , (a) 200 m2(b) comparable to the roof of a large house of dimension 14m × 14m., , 6.24, 6.25, , 21.2 cm, 28.5 J, No, the stone on the steep plane reaches the bottom earlier; yes, they reach with the, same speed v, [since mgh =(1/2) m v2 ], , (c) P = 4.5 kW, , vB = vC = 14.1 m s–1 , tB = 2 2 s , tC = 2 2 s, 6.26, , 0.125, , 6.27, 6.28, , 8.82 J for both cases., The child gives an impulse to the trolley at the start and then runs with a constant, relative velocity of 4 m s–1 with respect to the trolley’s new velocity. Apply momentum, conservation for an observer outside. 10.36 m s–1, 25.9 m., All except (V) are impossible., , 6.29, , Chapter, , 7, , 7.1, , The geometrical centre of each. No, the CM may lie outside the body, as in case of a, ring, a hollow sphere, a hollow cylinder, a hollow cube etc., , 7.2, , Located on the line joining H and C1 nuclei at a distance of 1.24 Å from the H end., , 7.3, , The speed of the CM of the (trolley + child) system remains unchanged (equal to v), because no external force acts on the system. The forces involved in running on the, trolley are internal to this system., lz = xpy – ypx, lx = ypz – zpy, ly = zpx – xpz, 72 cm, 3675 N on each front wheel, 5145 N on each back wheel., (a) 7/5 MR2 (b) 3/2 MR2, , 7.6, 7.8, 7.9, 7.10, , 2018-19

Page 232 :
232, , PHYSICS, , 7.11, , Sphere, , 7.12, , Kinetic Energy = 3125 J; Angular Momentum = 62.5 J s, , 7.13, , (a) 100 rev/min (use angular momentum conservation)., (b) The new kinetic energy is 2.5 times the initial kinetic energy of rotation. The child, uses his internal energy to increase his rotational kinetic energy., , 7.14, , 25 s-2; 10 m s-2, , 7.15, , 36 kW, , 7.16, , at R/6 from the center of original disc opposite to the center of cut portion., , 7.17, , 66.0 g, , 7.18, , (a) Yes; (b) Yes, (c) the plane with smaller inclination (äa α sin θ), , 7.19, , 4J, , 7.20, , 6.75×1012 rad s–1, , 7.21, , (a) 3.8 m (b) 3.0 s, , 7.22, , Tension = 98 N, NB = 245 N, NC = 147 N., , 7.23, , (a) 59 rev/min, (b) No, the K.E. is increased and it comes from work done by man in, the process., , 7.24, , 0.625 rad s–1, , 7.27, , (a) By angular momentum conservation, the common angular speed, , ω, , = (I1 ω1 + I2 ω2) / (I1 + I2), , (b) The loss is due to energy dissipation in frictional contact which brings the two, discs to a common angular speed ω. However, since frictional torques are internal, to the system, angular momentum is unaltered., 7.28, , Velocity of A = ωo R in the same direction as the arrow; velocity of B = ωo R in the, opposite direction to the arrow; velocity of C = ωo R/2 in the same direction as the, arrow. The disc will not roll on a frictionless plane., , 7.29, , (a) Frictional force at B opposes velocity of B. Therefore, frictional force is in the same, direction as the arrow. The sense of frictional torque is such as to oppose angular, motion. ωo and τ are both normal to the paper, the first into the paper, and the second, coming out of the paper., (b) Frictional force decreases the velocity of the point of contact B. Perfect rolling, ensues when this velocity is zero. Once this is so, the force of friction is zero., , 7.30, , Frictional force causes the CM to accelerate from its initial zero velocity. Frictional, torque causes retardation in the initial angular speed ωo. The equations of motion are, : µk m g = m a and µk m g R = – Iα, which yield v = µk g t, ω = ωo – µk m g R t / I. Rolling, begins when v = R ω. For a ring, I = m R2, and rolling begins at t = ωo R/2 µk g. For a, disc, I = ½ m R2 and rolling starts at break line t = R ωo/3 µk g. Thus, the disc begins to, roll earlier than the ring, for the same R and ωo. The actual times can be obtained for, R = 10 cm, ωo = 10 π rad s–1, µk = 0.2, , 2018-19

Page 233 :
ANSWERS, , 7.31, , 233, , (a) 16.4 N, (b) Zero, (c) 37° approx., Chapter, , 8, , 8.1, , (a ) No., (b) Yes, if the size of the space ship is large enough for him to detect the variation in g., (c) Tidal effect depends inversely on the cube of the distance unlike force, which depends, inversely on the square of the distance., , 8.2, , (a) decreases; (b) decreases; (c) mass of the body; (d) more., , 8.3, , Smaller by a factor of 0.63., , 8.5, , 3.54 × 108 years., , 8.6, , (a) Kinetic energy, (b) less,, , 8.7, , (a) No, (b) No, (c) No, (d) Yes, [The escape velocity is independent of mass of the body and the direction of projection., It depends upon the gravitational potential at the point from where the body is launched., Since this potential depends (slightly) on the latitude and height of the point, the escape, velocity (speed) depends (slightly) on these factors.], , 8.8 All quantities vary over an orbit except angular momentum and total energy., 8.9 (b), (c) and (d), 8.10 and 8.11 For these two problems, complete the hemisphere to sphere. At both P, and C,, potential is constant and hence intensity = 0. Therefore, for the hemisphere, (c) and (e), are correct., , P, , 8.12, , 2.6 × 108 m, , 8.13, , 2.0 × 1030 kg, , 8.14, , 1.43 × 1012 m, , 8.15, , 28 N, , 8.16, , 125 N, , 8.17, , 8.0 × 106 m from the earth’s centre, , 8.18, , 31.7 km/s, , 8.19, , 5.9 × 109 J, , C, , 2018-19

Page 234 :
234, , PHYSICS, , 8.20, , 2.6 × 106 m/s, , 8.21, , 0, 2.7 × 10-8 J/kg; an object placed at the mid point is in an unstable equilibrium, , 8.22, , –9.4 × 106 J/kg, , 8.23, , G M / R2 = 2.3 × 1012 m s-2 , ω2 R = 1.1 × 106 m s-2; here ω is the angular speed of rotation., Thus in the rotating frame of the star, the inward force is much greater than the outward, centrifugal force at its equator. The object will remain stuck (and not fly off due to, centrifugal force). Note, if angular speed of rotation increases say by a factor of 2000,, the object will fly off., , 8.24, , 3 × 1011 J, , 8.25, , 495 km, , 2018-19