Page 1 :
1, , Curriculum for, Diploma Programme in, , ELECTRONICS ENGINEERING, For the State of Uttar Pradesh, , P repared by:, , Curriculum Development Centre, , National Institute of, Technical Teachers Training and Research, Sector 26, Chandigarh - 160 019, January, 2019, Approved and Implemented by B.T.E,U.P, (Effective from session 2019-20), , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 1

Page 2 :
2, , CONTENTS, Sr. No Particulars, , Page No., , -, , Preface, , (i), , -, , Acknowledgement, , (ii), , 1., , Salient Features of the Diploma Programme, , 1, , 2., , Employment Opportunities, , 3, , 3., , Learning Outcomes of the Programme, , 5, , 4., , Deriving Curriculum Areas from Learning Outcomes of the, Programme, , 7, , 5., , Abstract of Curriculum Areas, , 9, , 6., , Horizontal and Vertical Organization of the Subjects, , 11, , 7., , Study and Evaluation Scheme, , 12, , 8., , Guidelines for Assessment of Student Centered Activities, , 18, , 9., , Detailed Contents of various Subjects, , FIRST SEMESTER, 1.1, Communication Skills-I, , 19-161, 19, , 1.2, , Applied Mathematics - I, , 22, , 1.3, , Applied Physics – I, , 25, , 1.4, , Applied Chemistry, , 31, , 1.5, , Engineering Drawing-I, , 35, , 1.6, , Engineering Mechanics and Materials, , 38, , 1.7, , General Workshop Practice-I, , 41, , SECOND SEMESTER, 2.1, , Applied Mathematics - II, , 44, , 2.2, , Applied Physics -II, , 46, , 2.3, , Basics of Information Technology, , 51, , 2.4, , Electrical Engineering -I, , 56, , 2.5, , Electronic Components and Devices, , 61, , 2.6, , General Workshop Practice-II, , 67, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 2

Page 3 :
3, , THIRD SEMESTER, 3.1, Applied Mathematics-III, , 71, , 3.2, , Electrical Engineering -II, , 74, , 3.3, , Environmental Studies, , 78, , 3.4, , Electronic Devices and Circuits, , 81, , 3.5, , Electronics Workshop, , 85, , 3.6, , Digital Electronics, , 87, , 3.7, , Universal Human Values, , 92, , FOURTH SEMESTER, 4.1, Communication Skill-II, , 96, , 4.2, , Industrial Electronics and Transducers, , 99, , 4.3, , Network Filters and Transmission Line, , 103, , 4.4, , Electronic Instruments and Measurement, , 107, , 4.5, , Principles of Communication Engineering, , 110, , 4.6, , Energy Conservation, , 115, , FIFTH SEMESTER, Industrial Training, , 120, , 5.1, , Industrial Management & Entrepreneurship Development, , 121, , 5.2, , Microprocessor and Peripheral Devices, , 126, , 5.3, , Optical Fiber Communication, , 130, , 5.4, , Consumer Electronics, , 133, , 5.5, , Programming in C, , 136, , 5.6, , Minor Project Work, , 139, , SIXTH SEMESTER, 6.1, Microwave Engineering, , 140, , 6.2, , Microcontrollers and Embedded System, , 144, , 6.3, , Wireless and Mobile Communication System, , 148, , 6.4, , Elective, , 152, , 6.5, , Project Work, , 162, , 10., 11., 12., 13., , Resource Requirement, Evaluation Strategy, Recommendations for Effective Implementation of Curriculum, List of Participants, , 166, 186, 189, 192, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 3

Page 4 :
4, , PREFACE, An important issue generally debated amongst the planners and educators world over is how, technical education can contribute to sustainable development of the societies struggling hard to, come in the same bracket as that of the developed nations. The rapid industrialization and, globalization has created an environment for free flow of information and technology through, fast and efficient means. This has led to shrinking of the world, bringing people from different, culture and environment together and giving rise to the concept of world turning into a global, village. In India, a shift has taken place from the forgettable years of closed economy to, knowledge based and open economy in the last few decades. In order to cope with the challenges, of handling new technologies, materials and methods, we have to develop human resources, having appropriate professional knowledge, skills and attitude. Technical education system is, one of the significant components of the human resource development and has grown, phenomenally during all these years. Now it is time to consolidate and infuse quality aspect, through developing human resources, in the delivery system. Polytechnics play an important, role in meeting the requirements of trained technical manpower for industries and field, organizations. The initiatives being taken by the State Board of Technical Education, UP to, revise the existing curricula of 6 diploma programmes as per the needs of the industry and, making them NSQF compliant,are laudable., In order to meet the requirements of future technical manpower, we will have to revamp our, existing technical education system and one of the most important requirements is to develop, outcome-based curricula of diploma programmes. The curricula for diploma programmes have, been revised by adopting time-tested and nationally acclaimed scientific method, laying, emphasis on the identification of learning outcomes of diploma programme., The real success of the diploma programme depends upon its effective implementation. However, best the curriculum document is designed, if that is not implemented properly, the output will not, be as expected. In addition to acquisition of appropriate physical resources, the availability of, motivated, competent and qualified faculty is essential for effective implementation of the, curricula., It is expected of the polytechnics to carry out job market research on a continuous basis to, identify the new skill requirements, reduce or remove outdated and redundant courses, develop, innovative methods of course offering and thereby infuse the much needed dynamism in the, system., Dr. SS Pattnaik, Director, National Institute of, Technical Teachers Training & Research, Chandigarh, CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 4

Page 5 :
5, , ACKNOWLEDGEMENTS, We gratefully acknowledge the guidance and contribution received from the following persons:, i), , Sh. Bhuvnesh Kumar , IAS, Secretary Govt. of UP, Technical Education Department,, Secretariat Lucknow., , ii), , Sh.R.C. Rajput,Director, Technical Education, UP for taking keen interest in the review of, this curriculum., , iii), , Sh.ManojKumar, Director, I.R.D.T.,Kanpur for entrusting this project of Curriculum, revision to NITTTR, Chandigarh., , iv), , Secretary, Board of Technical Education, UP for keen interest for this project of review, curriculum., , v), , Director, National Institute of Technical Teachers’ Training and Research, Chandigarh for, his support and academic freedom provided to Curriculum Development Centre., , vi), , All the participants from industry/field organizations, engineering colleges, polytechnics, and other technical institutions for their professional inputs during curriculum workshops., , vii), , Sh. AshokKushwaha,TextBookOfficer/CDCOfficer,IRDT,Kanpur, , viii), , Faculty/SubjectExperts from U.P. Government polytechnics, , ix), , Faculty from different departments of NITTTR, Chandigarh for content updation., , x), , Ramesh Gupta, UDC for her support and secretarial assistance in the conduct of, Curriculum workshops at Chandigarh, , xi), , Amit Kumar Sachdeva, LDC, Curriculum Development Centre for word processing this, document, , Coordinator, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 5

Page 6 :
6, , 1., , 1), , SALIENT FEATURES OF DIPLOMA PROGRAMME IN ELECTRONICS, ENGINEERING, , Name of the Programme, , :, , Diploma Programme in Electronics, Engineering, , 2), , Duration of the Programme :, , Three years (Six Semesters), , 3), , Entry Qualification, , Matriculation or equivalent NSQF Level as, , :, , Prescribed by State Board of Technical Education,, UP, 4), , Intake, , :, , 60 (or as prescribed by the Board), , 5), , Pattern of the Programme, , :, , Semester Pattern, , 6), , NSQF Level, , :, , Level - 5, , 7), , Ratio between theory and, , :, , 45 : 55 (Approx.), , Practice, 8), , Industrial Training:, Four weeks of industrial training is included after IV semester during summer vacation., Total marks allotted to industrial training will be 50., , 9), , Ecology and Environment :, As per Govt. of India directives, a subject on Environmental Studies has been, incorporated in the curriculum., , 10), , Energy Conservation:, A subject on Energy Conservation has been incorporated in the curriculum., , 11), , Entrepreneurship Development:, A full subject on Industrial Management and Entrepreneurship Development has been, incorporated in the curriculum., , 12), , Student Centred Activities:, A provision of 3-6 hrs per week has been made for organizing Student Centred Activities, for overall personality development of students. Such activities will comprise of co–, curricular activities such as expert lectures, self study,, , games, hobby classes like, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 6

Page 7 :
7, , photography, painting, singing etc. seminars, declamation contests, educational field, visits, NCC, NSS and other cultural activities, disaster management and safety etc., 13), , Project work, , A project work has been included in the curriculum to enable the student get familiarize, with the practices and procedures being followed in the industries and provide an, opportunity to work on some live projects in the industry., , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 7

Page 8 :
8, , 2., , EMPLOYMENT, OPPORTUNITIES, OF, DIPLOMA, HOLDERS, IN, ELECTRONICS ENGINEERING, The diploma holders in Electronics Engineering find employment in the following organizations:, (A), EMPLOYMENT OPPORTUNITIES, Various Departments/ organizations/boards and corporations, 1), , Tele-Communication Engineering and related Departments, , 2), , AIR, Doordarshan, , 3), , Radar and Wireless, , 4), , Railways, , 5), , Defence Services, Para-military Forces, , 6), , Civil Aviation, , 7), , Defence Research and Development Organizations, , 8), , Electricity Boards and Corporations etc., , 9), , Research and Development Deptt., , 10), , Maintenance Deptt., , Industry, 11), , Communication Industry manufacturing wireless mobile equipment for Defence, and Paramilitary forces, , 12), , PCB Design and Fabrication Industry, , 13), , Consumer Electronics Industry, , 14), , Electronic, , Components, , and, , Devices, , Manufacturing, , and, , Installation, , Organizations, 15), , Computer Assembling and Computer Peripheral Industry;, , 16), , Computer Software Areas for Electronic Design and Semi Conductor, Manufacturing Industry, , 17), , Instrumentation and Control Industries, , 18), , Internet Server Provides, , 19), , Public Sector Undertakings ( like BHEL, BEL, HAL, IOCL, HPCL, ISRO etc), , 20), , D.T.H component and Fabrication factory, , 21), , Mobile Phone assembly Industries, , 22), , Medical Electronics Industry, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 8

Page 9 :
9, , 23), , EPBX/ Telephone Exchange Manufacturing Industries, , 24), , Automobile Industry, , 25), , Automation and Control Industry (viz bottling plant, cement plant, automobile, units, escalators etc., , Development/Testing Laboratories/Organizations, 26), , Electronics Service Centres, , 27), , Opto Electronics (Medical & Comm.), , 28), , Computer Networking, , 29), , Hospitals, , 30), , Sales and Services of Electronic Gadgets from Small Scale Industries, , 31), , Call Centres, , Self Employment, -, , Marketing and Sales (Distributors - whole sale and retailers), , -, , Service Sector( repair and Maintenance; job work), , -, , Cable laying and jointing DBs etc., , -, , Preparing Simulated Models, , -, , Manufacturing Unit (e.g.- Bulb manufacturing, chalk manufacturing, circuit, manufacturing units etc), , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 9

Page 10 :
10, , 3., , LEARNING OUTCOMES OF DIPLOMA PROGRAMME IN ELECTRONICS, ENGINEERING, At the end of the programme, the students will be able to:, 1., Communicate effectively in English with others, 2., , Apply basic principles of Mathematics to solve single engineering problems, , 3., , Apply basic principles of Physics and Chemistry to solve engineering, problems, Prepare computerized reports, presentations using IT tools and computer, application software, Prepare and interpret Engineering Drawings, , 4., 5., 6., 7., , Use cutting tools, equipment and tooling for fabrication of jobs by following, safe practices at workplace, Use appropriate instruments to measure various engineering parameters ., , 8., , Measure and compute parameters related to basic electrical engineering, , 9., , Use appropriate procedures for preventing environmental pollution and, energy conservation, Assemble, test and troubleshoot electronic circuits consisting of passive and, active components by applying appropriate soldering, testing and measurement, techniques at workplaces., Understand principles of communication engineering ., , 10., , 11., 12., 13., 14., 15., , Understand basic principles of digital electronics and design combinational, and sequential circuits., Write basic programmes using C /C++, Apply principles of various networks, filters and transmission lines and their, associated parameters, Use various power controlled devices in industrial applications, , 16., , Use microprocessor and microcontroller based system using assembly level, language programming, , 17., 18., , Carryout trouble shooting of different basic consumer electronic products like, TV, Audio system and mobile.., Use optical fiber engineering for communication systems, , 19., , Use different digital communication systems, , 20., 21., , Programme microcontroller for Embeded Systems Applications using, C /C++, Understand Microwave and radar engineering, , 22., , Understand basic concepts of control systems, , 23., , Understand Embedded systems and its applications, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 10

Page 11 :
11, , 24, , Work with various active and passive microwave devices., , 25, , Use biomedical instruments, , 26, , Apply acquired knowledge and skill in solving a live problem or Industrial, project, , 27, , Use modern communication system, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 11

Page 12 :
12, , 4., , DERIVING CURRICULUM AREAS FROM LEARNING OUTCOMES OF THE, PROGRAMME, The following curriculum area subjects have been derived from learning outcomes:, Sr., No., , Learning Outcomes, , Curriculum Areas/Subjects, , 1., , Communicate effectively in English with, others, , Communication Skills, , 2., , Apply basic principles of Mathematics to, solve single engineering problems, , Applied Mathematics, , 3., , Apply basic principles of Physics and, Chemistry to solve engineering problems, , − Applied Physics, , 4., , Prepare computerized reports, presentations, using IT tools and computer application, software, , Basics of Information Technology, , 5., , Prepare and interpret Engineering Drawings, , Engineering Drawing, , 6., , Use cutting tools, equipment and tooling for, fabrication of jobs by following safe practices, at workplace, , General Workshop Practice, , 7., , Use appropriate instruments to measure, various engineering parameters ., , Electronic Instruments and, Measurement, , 8., , Measure and compute parameters related to, basic electrical engineering, , Electrical Engineering, , 9., , Use appropriate procedures for preventing, environmental pollution and energy, conservation, , Environmental Studies, , 10., , Assemble, test and troubleshoot electronic, circuits consisting of passive and active, components by applying appropriate, soldering, testing and measurement, techniques at workplaces., , Electronic Devices and Circuits, , 11., , Understand principles of communication, engineering ., , Principles of Communication, Engineering, , 12., , Understand basic principles of digital, electronics and design combinational and, sequential circuits., , Digital Electronics, , 13., , Write basic programmes using C /C++, , Programming in C, , 14., , Apply principles of various networks, filters, , Network Filters and Transmission, , − Applied Chemistry, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 12

Page 13 :
13, , and transmission lines and their associated, parameters, , Line, , 15., , Use various power controlled devices in, industrial applications, , Industrial Electronics and, Transducers, , 16., , Use microprocessor and microcontroller, based system using assembly level language, programming, , − Microprocessors, , Carryout trouble shooting of different basic, consumer electronic products like TV, Audio, system and mobile.., Use optical fiber engineering for, communication systems, , Consumer Electronics, , 19., , Use different digital communication systems, , Principles of Communication, Engineering, , 20., , Programme microcontroller for Embeded, Systems Applications using C /C++, Understand Microwave and radar, engineering, , Programming in C, , 22., , Understand basic concepts of control systems, , Control System, , 23., , Understand Embedded systems and its, applications, , Microcontrollers and Embedded, System, , 24., , Work with various active and passive, microwave devices., , Microwave Engineering, , 25., , Use biomedical instruments, , Biomedical electronics, , 26., , Apply acquired knowledge and skill in, solving a live problem or Industrial project, Use modern communication system, , Project Work, , 17., , 18., , 21., , 27., , − Microcontrollers and Embedded, System, , Optical Fiber Communication, , Microwave Engineering, , Wireless and Mobile communication, System, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 13

Page 14 :
14, , 5., , ABSTRACT OF CURRICULUM AREAS, , a), , General Studies, Communication Skills, 1., , b), , c), , d), , 2., , Environmental Studies, , 3., , Energy Conservation, , 4., , Industrial Management & Entrepreneurship Development, , Applied Sciences, 5., , Applied Mathematics, , 6., , Applied Physics, , 7., , Applied Chemistry, , Basic Courses in Engineering/Technology, Engineering Drawing, 8., 9., , General Workshop Practice, , 10., , Basics of Information Technology, , Applied Courses in Engineering/Technology, Engineering Mechanics and Materials, 11., 12., , Electrical Engineering, , 13., , Electronic Components and Devices, , 14., , Electronic Devices and Circuits, , 15., , Electronics Workshop, , 16., , Digital Electronics, , 17., , Industrial Electronics and Transducers, , 18., , Network Filters and Transmission Line, , 19., , Electronic Instruments and Measurement, , 20., , Principles of Communication Engineering, , 21., , Microprocessors, , 22., , Optical Fiber Communication, , 23., , Consumer Electronics, , 24., , Programming in C, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 14

Page 15 :
15, , e), , f), , 25., , Microwave Engineering, , 26., , Microcontrollers and Embedded System, , 27., , Wireless and Mobile Communication System, , Industrial Training, 28., , Minor Project Work, , 29., , Project Work, , Elective, 30., , Control System, , 31., , Medical Electronics, , 32., , Computer Networks, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 15

Page 16 :
16, , 6. HORIZONTAL AND VERTICAL ORGANISATION OF THE SUBJECTS, Sr., Subjects, Distribution in Periods per week, No., in Various Semesters, I, II, III IV, V, VI, 1., 6, 6, Communication Skills, 2., 5, 5, 5, Applied Mathematics, 3., 7, 7, Applied Physics, 4., 7, Applied Chemistry, 5., 8, Engineering Drawing, 6., 4, Engineering Mechanics and Materials, 7., 8, 8, General Workshop Practice, 8., 6, Basics of Information Technology, 9., 8, 8, Electrical Engineering, 10. Electronic Components and Devices, 12, 11. Environmental Studies, 5, 12. Electronic Devices and Circuits, 12, 13. Electronics Workshop, 6, 14. Digital Electronics, 8, 15. Industrial Electronics and Transducers, 8, 16. Universal Human Values, 3, 17. Network Filters and Transmission Line, 8, 18. Electronic Instruments and Measurement, 8, 19. Principles of Communication, 8, Engineering, 20. Energy Conservation, 5, 21. Industrial Management &, 5, Entrepreneurship Development, 22. Microprocessors, 8, 23. Optical Fiber Communication, 10, 24. Consumer Electronics, 8, 25. Programming in C, 8, 26. Minor Project Work, 4, 27. Microwave Engineering, 8, 28. Microcontrollers and Embedded System, 12, 29. Wireless and Mobile Communication, 10, System, 30. Elective, 6, CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 16

Page 17 :
17, , 31., , Project Work, , 32., , Student Centred Activities (SCA), Total, , -, , -, , -, , -, , -, , 8, , 3, 48, , 2, 48, , 1, 48, , 5, 48, , 4, 48, , 4, 48, , CORRECTED AND APPROVED BY BOARD OF TECHNICAL EDUCATION,U.P,LUCKNOW IN MEETING HELD ON, 10.07.2019 @RASHMI SONKAR, Page 17

Page 18 :
12, , 7., , STUDY AND EVALUATION SCHEME FOR DIPLOMA PROGRAMME IN ELECTRONICS ENGINEERING, , FIRST SEMESTER, , Sr., No., , STUDY, SCHEME, Credits, Periods/Week, , SUBJECTS, , MARKS IN EVALUATION SCHEME, , Th, , EXTERNAL, ASSESSMENT, Hrs Pr Hrs, , Tot, , 30, , 50, , 2½, , 20, , 3, , 70, , Total, Marks, of, Internal, &, External, 100, , 20, , 50, , 2½, , -, , 3, , 50, , 70, , INTERNAL, ASSESSMENT, Th, Pr Tot, , L, , T, , P, , 1.1 *Communication Skills-I, , 4, , -, , 2, , 4, , 20, , 1.2 *Applied Mathematics - I, , 5, , -, , -, , 4, , 20, , 1.3 *Applied Physics – I, , 5, , -, , 2, , 5, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 1.4 *Applied Chemistry, , 5, , -, , 2, , 5, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , 1.5 *Engineering Drawing-I, , -, , -, , 8, , 2, , -, , 40, , 40, , 60, , 3, , -, , -, , 60, , 100, , 1.6 Engineering Mechanics and, Materials, 1.7 General Workshop Practice-I, , 4, , -, , -, , 3, , 20, , -, , 20, , 50, , 2½, , -, , -, , 50, , 70, , -, , -, , 8, , 2, , -, , 40, , 40, , -, , -, , 60, , 4, , 60, , 100, , #Student Centred Activities (SCA), , -, , -, , 3, , 1, , -, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 23, , -, , 25, , 26, , 100, , 140, , 240, , 310, , -, , 120, , -, , 430, , 670, , Total, , 10, -, , * Common with other diploma programmes, # Student Centred Activities will comprise of co-curricular activities like extension lectures, games, hobby clubs e.g. photography, etc.,, seminars, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities and self study etc., , 12

Page 19 :
13, , SECOND SEMESTER (ELECTRONICS ENGINEERING), STUDY, MARKS IN EVALUATION SCHEME, SCHEME, Credits, INTERNAL, EXTERNAL, Periods/Week, ASSESSMENT, ASSESSMENT, Th, , Pr, , Tot, , Th, , Hrs, , Pr, , Hrs, , Tot, , 4, , 20, , -, , 20, , 50, , 2½, , -, , -, , 50, , Total, Marks, of, Internal, &, External, 70, , 2, , 5, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , -, , 6, , 2, , -, , 40, , 40, , -, , -, , 60, , 3, , 60, , 100, , 4, , -, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 2.5 Electronic Components and, Devices, , 6, , -, , 6, , 7, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 2.6 General Workshop Practice-II, , -, , -, , 8, , 2, , -, , 40, , 40, , -, , -, , 60, , 4, , 60, , 100, , -, , -, , 2, , 1, , -, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 20, , -, , 28, , 26, , 80, , 180, , 260, , 200, , -, , 240, , -, , 440, , 700, , Sr., No., , SUBJECTS, L, , T, , P, , 2.1 *Applied Mathematics - II, , 5, , -, , -, , 2.2 *Applied Physics -II, , 5, , -, , 2.3 *Basics of Information, Technology, 2.4 Electrical Engineering -I, , -, , #Student Centred Activities (SCA), Total, , * Common with other diploma programmes, # Student Centred Activities will comprise of co-curricular activities like extension lectures, games, hobby clubs e.g. photography, etc.,, seminars, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities and self study etc., , 13

Page 20 :
14, , THIRD SEMESTER (ELECTRONICS ENGINEERING), , Sr., No., , STUDY, SCHEME, Credits, Periods/Week, , SUBJECTS, L, , T, , P, , MARKS IN EVALUATION SCHEME, , 50, , Total, Marks, of, Internal, &, External, 70, , 3, , 100, , 150, , 20, , 3, , 70, , 100, , 2½, , 50, , 3, , 100, , 150, , -, , -, , 60, , 4, , 60, , 100, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 20, , 20, , -, , -, , 30, , 3, , 30, , 50, , -, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 100, , 190, , 290, , 250, , -, , 260, , -, , 510, , 800, , INTERNAL, ASSESSMENT, , EXTERNAL, ASSESSMENT, , Th, , Pr, , Tot, , Th, , Hrs, , Pr, , 3.1 *Applied Mathematics-III, , 5, , -, , -, , 4, , 20, , -, , 20, , 50, , 2½, , -, , 3.2 Electrical Engineering -II, , 4, , -, , 4, , 6, , 20, , 30, , 50, , 50, , 2½, , 50, , 3.3 *Environmental Studies, , 3, , -, , 2, , 3, , 20, , 10, , 30, , 50, , 2½, , 3.4 Electronic Devices and Circuits, , 6, , -, , 6, , 7, , 20, , 30, , 50, , 50, , 3.5 Electronics Workshop, , -, , -, , 6, , 3, , -, , 40, , 40, , 3.6 **Digital Electronics, , 4, , -, , 4, , 6, , 20, , 30, , 2, , -, , 1, , 1, , -, , -, , -, , 1, , 1, , 24, , -, , 24, , 3.7, , Universal Human Values, , # Student Centred Activities, Total, , 31, , Hrs, , Tot, , * Common with other diploma programmes, * Common course with Computer Science and Engineering, # Student Centred Activities will comprise of co-curricular activities like extension lectures, self study, games, hobby clubs e.g., photography etc., seminars, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities, disaster management, and safety etc., , 14

Page 21 :
15, , FOURTH SEMESTER (ELECTRONICS ENGINEERING), , Sr., No., , STUDY, SCHEME, Credits, Periods/Week, , Th, , Pr, , Tot, , Th, , Hrs, , Pr, , Hrs, , Tot, , 4, , 20, , 10, , 30, , 50, , 2½, , 20, , 3, , 70, , Total, Marks, of, Internal, &, External, 100, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , --, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 4, , -, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 4, , -, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 3, , -, , 2, , 3, , 20, , 30, , 50, , 2½, , 20, , 3, , 70, , 100, , -, , -, , 5, , 1, , -, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 23, , -, , 25, , 28, , 120, , 170, , 290, , 300, , -, , 240, , -, , 540, , 830, , SUBJECTS, L, , T, , P, , 4.1 *Communication Skill-II, , 4, , -, , 2, , 4.2 Industrial Electronics and, Transducers, , 4, , -, , 4.3 Network Filters and, Transmission Line, 4.4 Electronic Instruments and, Measurement, , 4, , 4.5 Principles of Communication, Engineering, 4.6 *Energy Conservation, #Student Centred Activities (SCA), Total, , MARKS IN EVALUATION SCHEME, INTERNAL, ASSESSMENT, , 10, , EXTERNAL, ASSESSMENT, , * Common with other diploma programmes, # Student Centred Activities will comprise of co-curricular activities like extension lectures, self study, games, hobby clubs e.g., photography etc., seminars, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities, disaster management, and safety etc., Industrial training of 4 weeks duration to be organised after 4th semester exams, , 15

Page 22 :
16, , FIFTH SEMESTER (ELECTRONICS ENGINEERING), , Sr., No., , -, , STUDY, SCHEME, Credits, Periods/Week, , SUBJECTS, L, , Industrial Training, , T, , -, , P, , MARKS IN EVALUATION SCHEME, , Pr, , Tot, , Th, , Hrs, , Pr, , Hrs, , Tot, , -, , -, , -, , -, , 50, , 3, , 50, , Total, Marks, of, Internal, &, External, 50, , 20, , 50, , 2½, , -, , -, , 50, , 70, , INTERNAL, ASSESSMENT, Th, , -, , 2, , -, , 5.1 *Industrial Management &, Entrepreneurship Development, 5.2 Microprocessors, , 5, , -, , -, , 4, , 20, , 4, , -, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 5.3 Optical Fiber Communication, , 4, , -, , 6, , 6, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 5.4 Consumer Electronics, , 4, , -, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 5.5 Programming in C, , 4, , -, , 4, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 5.6 Minor Project Work, , -, , -, , 6, , 2, , -, , 40, , 40, , -, , -, , 60, , 3, , 60, , 100, , -, , -, , 3, , 1, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 21, , -, , 27, , 30, , 190, , 290, , 250, , -, , 310, , -, , 560, , 850, , #Student Centred Activities (SCA), Total, , 100, , -, , EXTERNAL, ASSESSMENT, , # Student Centred Activities will comprise of co-curricular activities like extension lectures, self study, games, hobby clubs e.g., photography etc., seminars, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities, disaster management, and safety etc., , 16

Page 23 :
17, , SIXTH SEMESTER (ELECTRONICS ENGINEERING), , Sr., No., , STUDY, MARKS IN EVALUATION SCHEME, SCHEME, Credits, INTERNAL, EXTERNAL, Periods/Week, ASSESSMENT, ASSESSMENT, Th, , Pr, , Tot, , Th, , Hrs, , Pr, , Hrs, , Tot, , 5, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , Total, Marks, of, Internal, &, External, 150, , 6, , 7, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , -, , 6, , 6, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , 4, , -, , 2, , 4, , 20, , 30, , 50, , 50, , 2½, , 50, , 3, , 100, , 150, , -, , -, , 8, , 3, , -, , 50, , 50, , -, , -, , 100, , 4, , 100, , 150, , -, , -, , 4, , 1, , 30, , 30, , -, , -, , -, , -, , -, , 30, , 30, , 26, , 200, , 280, , 200, , -, , 300, , -, , 500, , 780, , SUBJECTS, L, , T, , P, , 6.1 Microwave Engineering, , 4, , -, , 4, , 6.2 Microcontrollers and Embedded, System, 6.3 Wireless and Mobile, Communication System, , 6, , -, , 4, , 6.4 *Elective, 6.5 Project Work, #Student Centred Activities (SCA), Total, , 18, , 80, , *Elective: Any one out of the following:, 6.4.1 Control System, 6.4.2 Medical Electronics, 6.4.3 Computer Networks, # Student Centred Activities will comprise of co-curricular activities like extension lectures, self study, games, hobby clubs e.g., photography etc., seminars, declamation contests, educational field visits, N.C.C., NSS, Cultural Activities, disaster management and, safety etc., , 17

Page 24 :
18, , 8., , GUIDELINES FOR ASSESSMENT OF STUDENT CENTRED ACTIVITIES (SCA), It was discussed and decided that the maximum marks for SCA should be 30 as it, involves a lot of subjectivity in the evaluation. The marks may be distributed as follows:, i., , 10 Marks for general behaviour and discipline, (by HODs in consultation with all the teachers of the department), , ii., , 5 Marks for attendance as per following:, (by HODs in consultation with all the teachers of the department), a), b), c), , iii., , 75 - 80%, 80 - 85%, Above 85%, , 2 Marks, 4 Marks, 5 Marks, , 15 Marks maximum for Sports/NCC/Cultural/Co-curricular/ NSS, activities as per following:, (by In-charge Sports/NCC/Cultural/Co-curricular/NSS), a), b), c), , 15, 10, 5, , -, , State/National Level participation, Participation in two of above activities, Inter-Polytechnic level participation, , Note: There should be no marks for attendance in the internal sessional of different subjects., , 18

Page 25 :
19, , 1.1, , COMMUNICATION SKILLS – I, L T P, 4 - 2, , RATIONALE, Knowledge of English Language plays an important role in career development. This subject, aims at introducing basic concepts of communication besides laying emphasis on developing, listening, speaking, reading and writing skills as parts of Communication Skill., LEARNING OUTCOMES, After undergoing the subject, the students will be able to:, ., • Understand the importance of effective communication, • Describe the process of communication, • Communicate effectively in different contexts, • Identify parts of speech, • Write correct sentences using appropriate vocabulary, • Reproduce and match words and sentences in a paragraph, • Write various types of paragraphs, notices for different purposes and composition on, picture with appropriate format, • Read unseen texts with comprehension, ., DETAILED CONTENTS, 1, , Basics of Communication, 1.1, 1.2, 1.3, 1.4, , 2, , 3, , Definition and process of communication, Types of communication - formal and informal, oral and written, verbal and nonverbal, Communications barriers and how to overcome them, Barriers to Communication, Tools of Communication, , Application of Grammar, 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, , (13 periods), , (18 periods), , Parts of Speech (Noun, verb, adjective, adverb) and modals, Sentences and its types, Tenses, Active and Passive Voice, Punctuation, Direct and Indirect Speech, , Reading Skill, , (10 periods), 19

Page 26 :
20, , Unseen passage for comprehension (one word substitution, prefixes, suffixes, antonyms,, synonyms etc. based upon the passage to be covered under this topic), , 4, , Writing Skill, 4.1, 4.2, 4.3, , (15 periods), , Picture composition, Writing paragraph, Notice writing, , LIST OF PRACTICALS, Note: Teaching Learning Process should be focused on the use of the language in writing reports, and making presentations., Topics such as Effective listening, effective note taking, group discussions and regular, presentations by the students need to be taught in a project oriented manner where the, learning happens as a byproduct., Listening and Speaking Exercises, 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., , Self and peer introduction, Newspaper reading, Just a minute session-Extempore, Greeting and starting a conversation, Leave taking, Thanking, Wishing well, Talking about likes and dislikes, Group Discussion, Listening Exercises., , INSTRUCTIONAL STRATEGY, Student should be encouraged to participate in role play and other student centred activities in class, room and actively participate in listening exercises, MEANS OF ASSESSMENT, −, −, −, , Assignments and quiz/class tests, mid-semester and end-semester written tests, Actual practical work, exercises and viva-voce, Presentation and viva-voce, , RECOMMENDED BOOKS, , 20

Page 27 :
21, , 1., 2., 3., 4., 5., 6., 7., , Communicating Effectively in English, Book-I by RevathiSrinivas; Abhishek Publications,, Chandigarh., Communication Techniques and Skills by R. K. Chadha; DhanpatRai Publications, New, Delhi., High School English Grammar and Composition by Wren & Martin; S. Chand &, Company Ltd., Delhi., Excellent General English-R.B.Varshnay, R.K. Bansal, Mittal Book Depot, Malhotra, The Functional aspects of Communication Skills – Dr. P. Prsad, S.K. Katria& Sons, New, Delhi, Q. Skills for success – Level & Margaret Books, Oxford University Press., e-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , Websites for Reference:, 1., 2., 3., 4., 5., , http://www.mindtools.com/ page 8.html – 99k, http://www.letstalk.com.in, http://www.englishlearning.com, http://learnenglish.britishcouncil.org/en/, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, , Time Allotted, (Periods), 13, , Marks Allotted, (%), 24, , 2, , 18, , 32, , 3, , 10, , 16, , 4, , 15, , 28, , Total, , 56, , 100, , 21

Page 28 :
22, , 1.2, , APPLIED MATHEMATICS - I, L, , T, 5, , P, -, , -, , RATIONALE, Contents of this course provide fundamental base for understanding elementary mathematics and, their uses in solving engineering problems. Contents of this course will enable students to use, basic mathematical function like logarithms, partial fractions, matrices and basic 2D, curves in, solving various engineering problems of all fields., LEARNING OUTCOMES, After undergoing this course, the students will be able to:, •, •, •, •, •, •, , apply Binomial theorem to solve engineering problems, apply determinants properties and Crammer’s rule to solve engineering problems, apply dot & cross product of vectors to find the solution of engineering problems, use complex numbers in various engineering problems, apply differential calculus and higher order to solve engineering problems, find velocity, acceleration, errors and approximation in engineering problems with, application of derivatives., DETAILED CONTENTS, , 1., , 2., , Algebra -I, , (12 Periods), , 1.1, , Series : AP and GP; Sum, nth term, Mean, , 1.2, , Binomial theorem for positive, negative and fractional index (without proof)., Application of Binomial theorem., , 1.3, , Determinants : Elementary properties of determinant of order 2 and 3,, Multiplication system of algebraic equation,, Consistency of equation,, Crammer's rule, , Algebra- II, 2.1, 2.2, , (12 Periods), , Vector algebra : Dot and Cross product, Scaler and vector triple product., Complex number., Complex numbers, Representation, Modulus, theorem, its application in solving algebraic, its properties.., , and amplitude, Demoivre, equations, Mod. function and, , 22

Page 29 :
23, , 3., , 4., , 5., , Trigonometry, , (10 Periods), , 3.1, , Relation between sides and angles of a triangle : Statement of various formulae, showing relationship between sides and angle of a triangle., , 3.2, , Inverse circular functions : Simple case only, , Differential Calculus - I, , (18 Periods), , 4.1, , Functions, limits, continuity, - functions and their graphs, range and domain,, elementary methods of finding limits (right and left), elementary test for, continuity and differentiability., , 4.2, , Methods of finding derivative, Trigonometric functions, exponential function,, Function of a function, Logaritimic differentiation, Differentiation of Inverse, trigonometric function, Differentiation of implicit functions., , Differential Calculus - II, , (18 Periods), , 5.1, , Higher order derivatives, Leibnitz theorem (without proof). Simple applications., , 5.2, , Application - Finding Tangents, Normal, Points of, Maxima/Minima,, Increasing/Decreasing functions, Rate,, Measure, velocity, Acceleration,, Errors and approximation., , INSTRUCTONAL STRATEGY, The basic instructional strategy to teach basic mathematics, Binomial theorem, trigonometry,, differential equations etc. should be conceptual with real world applications of relevant branch., More numerical and theory examples can be used for clear understanding of the content., MEANS OF ASSESSMENT, -, , Assignments and Quiz/Class Tests, Mid-term and End-term Written Tests, Model/Prototype Making, , RECOMMENDED BOOKS, 1., 2., 3, 4., , Elementary Engineering Mathematics by BS Grewal, Khanna Publishers, New Delhi, Engineering Mathematics, Vol I & II by SS Sastry, Prentice Hall of India Pvt. Ltd.,, Applied Mathematics-I by Chauhan and Chauhan, Krishna Publications, Meerut., Applied Mathematics-I (A) by Kailash Sinha and Varun Kumar; Aarti Publication,, Meerut, 23

Page 30 :
24, , SUGGESTED DISTRIBUTION OF MARKS, Topic, , Time Allotted, (Periods), , Marks Allotted, (%), , 1., , 12, , 20, , 2., , 12, , 20, , 3., , 10, , 12, , 4, , 18, , 24, , 5, , 18, , 24, , Total, , 70, , 100, , 24

Page 31 :
25, , 1.3, , APPLIED PHYSICS – I, L T P, 5 - 2, , RATIONALE, Applied physics includes the study of a diversified topics related to the world around us. It aims, to give an understanding of this world both by observation and by prediction of the way in which, objects behave. Concrete knowledge of physical laws, analysis and applications in various fields, of engineering and technology are given prominence in this course content., Note: Teachers should give examples of engineering/technology applications of various, concepts and principles in each topic so that students are able to learn and appreciate these, concepts and principles. In all contents, SI units should be followed., LEARNING OUTCOMES, After undergoing this course, the students must be able to:, • Identify the use of S.I. system of measurement with accuracy and how it is used in, engineering, • Represent physical quantities as scalars and vectors, applying the physical laws and, concepts of linear and circular motion in everyday life., • Solve difficult problems (walking of man, horse and cart problem, flying of bird/, aircraft, etc.), • Analyse and design banking of roads/railway tracks and apply conservation of, momentum principle to Explain rocket propulsion, recoil of gun etc., • Derive work, power and energy relationship and solve problems about work and power., • Define work, energy and power and their units., • Describe conservation of energy and its applications, • Understand the concept of rotational motion of a rigid body and its applications, • Apply the physical laws and concepts of gravity, its variation with longitude and latitude, and its uses in space satellite etc., ., • Understand the concept of elasticity, surface tension, pressure and the laws governing, movement of fluids., • Express physical work in term of heat and temperature; Measure temperature in various, processes on different scales (Celsius, Kelvin, Fahrenheit etc.), • Distinguish between conduction, convection and radiation, identify the different methods, for reducing heat losses, • Understand the laws of thermodynamics, Carnot cycle and their applications., , 1., , Units and Dimensions, 1.1, , DETAILED CONTENTS, (10 Periods), , Need of Measurement in engineering and science, unit of a physical quantities fundamental and derived units, systems of units (FPS, CGS and SI units), 25

Page 32 :
26, , 1.2, 1.3, 1.4, , 1.5, 1.6, , 1.7, , Dimensions and dimensional formulae of physical quantities., Principle of homogeneity of dimensions, Dimensional equations and their applications, conversion of numerical values of, physical quantities from one system of units into another, checking the, correctness of physical equations and deriving relations among various physical, quantities, Limitations of dimensional analysis, Error in measurement, accuracy and precision of instruments, random and, systematic errors, absolute error, relative error, and percentage error, Estimation, of probable errors in the results of measurement (combination of errors in, addition, subtraction, multiplication, division and powers), rules for representing, significant figures in calculation., Application of units and dimensions in measuring length, diameter,, circumference, volume, surface area etc. of metallic and non metallic blocks,, wires, pipes etc (at least two each)., , 2., , Force and Motion, (10 periods), 2.1, Scalar and vector quantities – examples, representation of vector, types of, vectors, 2.2, Addition and Subtraction of Vectors, Triangle and Parallelogram law (Statement, only), Scalar and Vector Product., 2.3, Resolution of Vectors and its application to lawn roller., 2.4, Force, Momentum, Statement and Derivation of Conservation of linear, momentum, its applications such as recoil of gun., 2.5, Impulse and its Applications, 2.6, Circular motion (Uniform and Non-uniform), definition of angular displacement,, angular velocity, angular acceleration, frequency, time period., 2.7, Relation between linear and angular velocity, linear acceleration and angular, acceleration (related numerical), 2.8, Central force, Expression and Applications of Centripetal and centrifugal forces, with examples such as banking of roads and bending of cyclist, Principle of, centrifuge., 2.9, Application of various forces in lifts, cranes, large steam engines and turbines, , 3., , Work, Power and Energy, 3.1, 3.2, 3.3, , (10 periods), , Work: and its units, examples of zero work, positive work and negative work,, conservative and non-conservative force,, Friction: modern concept, types, laws of limiting friction, Coefficient of friction, and its Engineering Applications., Work done in moving an object on horizontal and inclined plane for rough and, plane surfaces with its applications, 26

Page 33 :
27, , 3.4, 3.5, 3.6, 3.7, , 4, , Rotational Motion, 4.1, 4.2, 4.3, 4.4, , 4.5, 4.6, 4.7, 5, , 5.5, 5.6, , 6.2, 6.3, , 6.4, , (08 periods), , Gravitational force, Kepler’s law of planetary motion,, Acceleration due gravity and its variation,, Gravitational Potential and Gravitational potential energy,, Motion of satellite, orbital velocity and time period of satellite, Total energy and, Binding energy of a satellite, Escape energy and escape velocity,, Types of satellites, Geo-stationary satellite, semi-synchronous, polar, satellite, (concept only) and their uses in science and technology,, Concept of Black Holes,, , Properties of Matter, 6.1, , (10 periods), , Concept of translatory and rotatory motions with examples, Definition of torque with examples, Angular momentum, Conservation of angular momentum (quantitative) and its, examples, Moment of inertia and its physical significance, radius of gyration for rigid body,, Theorems of parallel and perpendicular axes (statements only), Moment of inertia, of rod, disc, ring and sphere (hollow and solid) (Formulae only). Concept of Fly, wheel., Rotational kinetic energy, Rolling of sphere on the slant plane,, Comparison of linear motion and rotational motion., Application of rotational motions in transport vehicles, and machines, , Motion of planets and satellites, 5.1, 5.2, 5.3, 5.4, , 6., , Energy and its units: Kinetic energy and potential energy with examples and their, derivation, work energy theorem., Principle of conservation of mechanical energy for freely falling bodies, examples, of transformation of energy., Power and its units, calculation of power in numerical problems, Application of Friction in brake system of moving vehicles, bicycle, scooter, car, trains etc., , (12 periods), , Elasticity: definition of stress and strain, different types of modulii of elasticity,, Hooke’s law, significance of stress strain curve, Pressure: definition, its units, atmospheric pressure, gauge pressure, absolute, pressure, Fortin’s Barometer and its applications, Surface tension: concept, its units, angle of contact, Capillary action and, determination of surface tension from capillary rise method, applications of, surface tension, effect of temperature and impurity on surface tension, Viscosity and coefficient of viscosity: Terminal velocity, Stoke’s law and effect, of temperature on viscosity, application in hydraulic systems., , 27

Page 34 :
28, , 6.5, , 7., , Concept of fluid motion, stream line and turbulent flow, Reynold’s number, Equation of continuity, Bernoulli’s Theorem and their applications., , Heat and Thermodynamics, (10 periods), 7.1, Difference between heat and temperature, 7.2, Modes of transfer of heat (Conduction, convection and radiation with examples), 7.3, Different scales of temperature and their relationship, 7.4, Expansion of solids, liquids and gases, coefficient of linear, surface and cubical, expansions and relation amongst them, 7.5, Heat conduction in a metal rod, Temperature gradient, Concept of Co-efficient of, thermal conductivity, Uses and effects of Heat conduction in Daily life., 7.6, Isothermal and Adibatic process, 7.7, Zeroth, First and second law of thermodynamics, Heat engine (concept Only),, Carnot cycle., 7.8, Application of various systems of thermometry in refrigeration and airconditioning etc., , LIST OF PRACTICALS (to perform minimum six experiments), 1 To find radius of wire and its volume and the maximum permissible error in these, quantities by using both verniercalipers and screw gauge., 2 To find the value of acceleration due to gravity on the surface of earth by using a simple, pendulum., 3 To determine the Radius of curvature of (i) convex mirror, (ii) concave mirror by, spherometer, 4 To verify parallelogram law of forces, 5 To study conservation of energy of a ball or cylinder rolling down an inclined plane., 6 To find the Moment of Inertia of a flywheel about its axis of rotation, , 7 To determine the atmospheric pressure at a place using Fortin’s Barometer, 8 To determine the viscosity of glycerin by Stoke’s method, 9 To determine the coefficient of linear expansion of a metal rod, 10 To determine force constant of spring using Hooks law, INSTRUCTIONAL STATREGY, Teacher may use various teaching aids like live models, charts, graphs and experimental kits etc., for imparting effective instructions in the subject. The teacher should explain about field, applications before teaching the basics to develop proper understanding of the physical, phenomenon. Use of demonstration and animations can make the subject interesting and may, develop scientific temper in the students. Teacher must plan a tour of Science Park/planetarium, available in nearby areas in order to enhance the interest in this course., MEANS OF ASSEMENTS, −, Assignment & Quiz,, −, Mid-Term and End-Term written test,, −, Model Making,, 28

Page 35 :
29, , −, −, , Actual Lab & Practical Work,, VivaVoice, , RECOMMENDED BOOKS, 1, Text Book of Physics for Class XI (Part-I, Part-II); N.C.E.R.T., Delhi, 2, Concepts in Physics by HC Verma, Vol. I & II, Bharti Bhawan Ltd. New Delhi, 3, Comprehensive Practical Physics, Vol, I & II, JN Jaiswal, Laxmi Publications (P) Ltd.,, New Delhi, 4, B.Sc.Practical Physics by C L Arora, S. Chand Publication.., 5, Engineering Physics by PV Naik, Pearson Education Pvt. Ltd, New Delhi, 6, Engineering Physics by DK Bhhatacharya&PoonamTandan; Oxford University Press,, New Delhi, 7, Modern Engineering Physics by SL Gupta, Sanjeev Gupta, DhanpatRai Publications, 8, V. Rajendran,physics-I, Tata McGraw-Hill raw Hill publication, New Delhi, 9, Arthur Beiser, Applied Physics, Tata McGraw-Hill raw Hill publication, New Delhi, 10, Physics Volume 1, 5th edition, HalidayResnick and Krane, Wiley publication, , 29

Page 36 :
30, , Topic No., 1, 2, 3, 4, 5, 6, 7, Total, , SUGGESTED DISTRIBUTION OF MARKS, Time Allotted, Marks Allotted, (Periods), (%), 10, 15, 10, 15, 10, 15, 10, 15, 08, 10, 12, 16, 10, 14, 70, , 100, , 30

Page 37 :
31, , 1.4, , APPLIED CHEMISTRY, L T P, 5 - 2, , RATIONALE, The use of various chemicals and chemical products in diverse technical and engineering fields, have repeatedly proved the importance of Applied Chemistry, which enhances its role to a new, peak. On the other hand, ever increasing use of such materials will compel engineers, technocrats, to acquire essential applied chemistry knowledge in order to select engineering materials, which, not only suit them but also provide more environmental compatibility. This situation demands, principles of Applied Chemistry in diploma-engineering courses. Principles of Applied, Chemistry will enable budding engineers and technocrats to develop scientific temper and, appreciate physical, chemical and engineering properties of materials. Hence the subject of, Applied Chemistry., LEARNING OUTCOMES, After undergoing this subject, the student will be able to:, •, •, •, •, •, •, •, •, •, •, •, •, •, •, , Classify various substances based on state of aggregation, Substantiate the laws and principles on which structure of atom is established., Explain and predict properties of substances., Explain sources of water and various characteristics of water (quantitatively)., Explain cause and factors which can adversely affecting natural water quality and, remedial measures available for water purification, Think critically, develop and adapt water conservation techniques., Explain corrosion of metal and their preventive measures., explain chemical nature and causes of corrosion, apply correct and efficient methods of corrosion prevention., explain chemistry of fuels and their relative advantages., select most efficient fuel for the engine and engineering applications., suggest how to subside air pollution caused by the use of fossil fuels, explain the chemistry of various polymers and plastics, verify suitability and select polymer/rubber/plastic materials for engineering applications., DETAILED CONTENTS, , 1., , Atomic Structure, Periodic Table and Chemical Bonding, 1.1, 1.2, 1.3, , (14 periods), , Fundamental particles- mass and charges of electrons, protons and neutrons with, names of the scientists who discovered these fundamental particles., Bohr’s model of atom and successes and limitations of atomic theory (qualitative, treatment only)., Atomic number, atomic mass number isotopes and isobars., , 31

Page 38 :
32, , 1.4, , Definition of orbit and orbitals, shapes of s and p orbitals only, quantum numbers, and their significance,, , 1.5, , Aufbau’s principle, Pauli’s exclusion principle and Hund’s rule electronic, configuration of elements with atomic number (Z) = 30 only. (Electronic, configurations of elements with atomic number greater than 30 are excluded)., Modern periodic law and periodic table, groups and periods, classification of, elements into s, p, d and f blocks (periodicity in properties - excluded), Chemical bonding and cause of bonding and types such as ionic bond in NaCl, sigma (σ) and pi (π) covalent bonds in H2, HCl, Cl2, elementary idea of, hybridization in BeCl2, BF3, CH4, NH3 and H2O, VSEPR, Molecular orbital, Theory, States of Matter: Solid, Liquid & Gas, Metallic bonding- explanation with the, help of electron gas (sea) model., , 1.6, 1.7, , 1.8, , 2., , Fuelsand Lubricants, 2.1, 2.2, , 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 3., , Water, 3.1, 3.2, , 3.3, 3.4, 3.5, , (18 periods), , Definition of fuel, classification of fuels, characteristics of good fuel, relative, merits of gaseous, liquid and solid fuels, Calorific value-higher calorific value, lower calorific value, determination of, calorific value of solid or liquid fuel using Bomb calorimeter and numerical, examples., Coal - types of coal and proximate analysis of coal, Fuel rating – Octane number and Cetane number, fuel-structural influence on, Octane and Cetane numbers, Gaseous fuels – chemical composition, calorific value and applications of natural, gas (CNG), LPG, producer gas, water gas and biogas., Elementary ideal on – hydrogen as future fuels, nuclear fuels., Lubricants: Definition and properties, mechanism, industrial application and its, function in bearings., Synthetic lubricants and cutting fluids., (14 periods), Demonstration of water resources on Earth using pie chart., Classification of water – soft water and hard water, action of soap on hard water,, types of hardness, causes of hardness, units of hardness – mg per liter (mgL-1) and, part per million (ppm) and simple numerical, pH and buffer solutions and their, applications., Disadvantages caused by the use of hard water in domestic and boiler feed water., Primming and foaming and caustic embrittlement in boilers., Removal of hardness -Permutit process and Ion-exchange process., Physico-Chemical methods for Water Quality Testing, a) Determination of pH using pH meter, total dissolved solids (TDS), , 32

Page 39 :
33, , 4., , 3.6, , b) Testing and Estimation of- alkalinity, indicator their types and application total, hardness by EDTA method and O’Hener’s Method. (chemical reaction of, EDTA method are excluded)., c) Understanding of Indian Water Quality standards as per WHO, Natural water sterilization by chlorine and UV radiation and reverse osmosis., , 3.7, , Municipality waste water treatment. Definition of B.O.D and C.O.D., , Electrochemistry, , (4 periods), , Redox Reaction, Electrode Potential, Nernst equation, Electrochemical cell (Galvanic and, Electrobytes); Nernst equation., 5., , Corrosion and its Control, 5.1, 5.2, , 5.3, 5.4, , 6., , Definition of corrosion and factors affecting corrosion rate., Theories of, a), Dry (chemical) corrosion- Pilling Bedworth rule, b), Wet corrosion in acidic atmosphere by hydrogen evolution mechanism, Definition of passivity and galvanic series, Corrosion control:, a), Metal coatings – Cathodic protection, Cementation on Base Metal Steel –, Application of Metal Zn (Sheradizing),Cr (Chromozing) and Al, (Calorizing), Sacrificial protection and impressed current voltage, b), Inorganic coatings – Anodizing and phosphating,, c), Organic coatings - use of paints varnishes and enamels, d), Internal corrosion preventive measures- alloying (with reference to, passivating, neutralizing and inhibition) and heat treatment (quenching,, annealing), , Organic compounds, Polymers and Plastics, 6.1, 6.2, 6.3, 6.4, 6.5, , (10 periods), , (10 periods), , Classification of organic compounds and IUPAC Nomenclature, Definition of polymer, monomer and degree of polymerization, Brief introduction to addition and condensation polymers with suitable examples, (PE, PS, PVC, Teflon, Nylon -66 and Bakelite), Definition of plastics, thermo plastics and thermo setting plastics with suitable, examples, distinctions between thermo and thermo setting plastics, Applications of polymers in industry and daily life, , LIST OF PRACTICALS, , 33

Page 40 :
34, , 1., 2., 3., 4., 5., , Estimation of total hardness of water using standard EDTA solution, Estimation of total alkalinity of given water sample by titrating it against standard, sulfuric acid solution, Proximate analysis of solid fuel), Estimation of temporary hardness of water sample by O’ Hener’s Method., Determination of flash and fire point of given lubricating oil using Able’s flash point, apparatus, , INSTRUCTIONAL STRATEGY, Teachers may take help of various models and charts while imparting instructions to make the, concept clear. More emphasis should be laid on discussing and explaining practical applications, of various chemical process and reactions. In addition, students should be encouraged or, motivated to study those processes in more details, which may find practical application in their, future professional career., MEANS OF ASSEMENTS, −, Assignment & Quiz,, −, Mid-Term and End-Term written test,, −, Model Making,, −, Actual Lab & Practical Work,, −, Viva Voice, RECOMMENDED BOOKS, 1., 2., 3., 4., 5., 6., 7., , Chemistry in Engineering by J.C. Kuricose& J. Rajaram, Tata McGraw Hill, Publishing, Company Limited, New Delhi., Engineering Chemistry by P.C. Jain & Monika Jain, DhanapatRai Publishing Company,, New Delhi., Eagle’s Applied Chemistry - I by S. C. Ahuja & G. H. Hugar, Eagle Prakashan,, Jalandhar., Engineering Chemistry – A Text Book by H. K. Chopra & A. Parmar, Narosa Publishing, House, New Delhi., Applied Chemistry - I by Dr. P. K Vij&ShikshaVij, Lords Publications, Jalandhar., Engineering Chemistry by Dr.Himanshu Pandey, Goel Publishing House, Meerut, India, e-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , 34

Page 41 :
35, , SUGGESTED DISTRIBUTION OF MARKS, Topics, 1., 2., 3., 4., 5., 6., Total, , Time Allotted, (hrs), 14, 18, 14, 4, 10, 10, 70, , Marks Allotted, (%), 20, 24, 20, 6, 15, 15, 100, , 35

Page 42 :
36, , 1.5, , ENGINEERING DRAWING - I, L T P, - - 8, , RATIONALE, Drawing is the language of engineers and technicians. Reading and interpreting engineering, drawing is their day to day responsibility. The subject is aimed at developing basic graphic skills, in the students so as to enable them to use these skills in preparation of engineering drawings,, their reading and interpretation. The emphasis, while imparting instructions, should be to, develop conceptual skills in the students following BIS SP 46 – 1988., Note:, i), ii), iii), , First angle projection is to be followed, Minimum of 18 sheets to be prepared and atleast 2 sheets on AutoCAD, Instructions relevant to various drawings may be given along with appropriate, demonstrations, before assigning drawing practice to students, , LEARNING OUTCOMES, After undergoing the subject, the students will be able to:, •, •, •, •, •, •, •, •, •, •, •, , Identify and use of different grades of pencils and other drafting instruments which are, used in engineering field, Draw free hand sketches of various kinds of objects., Utilize various types of lines used in engineering drawing., Read and apply different dimensioning methods on drawing of objects., Use different types of scales and their utilization in reading and reproducing drawings of, objects and maps., Draw 2 - dimensional view of different objects viewed from different angles, (orthographic views), Draw and interpret complete inner hidden details of an object which are otherwise not, visible in normal view, To make projections of Solid, Generate isometric (3D) drawing from different 2D (orthographic) views/sketches, Identify conventions for different engineering materials, symbols, sections of regular, objects and general fittings used in Civil and Electrical household appliances, Use basic commands of AutoCAD., DETAILED CONTENTS, , 1., , Introduction to Engineering Drawing, 1.1, 1.2, , (03 sheets), , Introduction to drawing instruments, materials, layout and sizes of drawing sheets, and drawing boards., Different types of lines in Engineering drawing as per BIS specifications, , 36

Page 43 :
37, , 1.3, , 1.4, , 2., , Dimensioning Technique, 2.1, 2.2, , 3., , 3.2, , 4.4, , 4.5, 4.6, 5, , (02 sheets), Scales –their needs and importance (theoretical instructions), type of scales,, definition of R.F. and length of scale, Drawing of plain and diagonal scales, , Orthographic Projections, 4.1, 4.2, 4.3, , (01 sheet), , Necessity of dimensioning, method and principles of dimensioning (mainly, theoretical instructions), Dimensioning of overall sizes, circles, threaded holes, chamfered, surfaces,, angles, tapered surfaces, holes, equally spaced on P.C.D., counter sunk holes,, counter bored holes, cylindrical parts, narrow spaces and gaps, radii, curves and, arches, , Scales, 3.1, , 4., , Practice of vertical, horizontal and inclined lines, geometrical figures such as, triangles, rectangles, circles, ellipses and curves, hexagonal, pentagon with the, help of drawing instruments., Free hand and instrumental lettering (Alphabet and numerals) – upper case, (Capital Letter), single stroke, vertical and inclined at 75 degree, series of 5,8,12, mm of free hand and instrumental lettering of height 25 to 35 mm in the ratio of, 7:4, , (06 sheets), , Theory of orthographic projections (Elaborate theoretical instructions), Projection of Points in different quadrant, Projection of Straight Line (1st and 3rd angle), 4.3.1. Line parallel to both the planes, 4.3.2. Line perpendicular to any one of the reference plane, 4.3.3. Line inclined to any one of the reference plane., Projection of Plane – Different lamina like square, rectangular, triangular and, circle inclined to one plane, parallel and perpendicular to another plane in 1 st, angle only, Three views of orthographic projection of different objects. (At least one sheet in, 3rd angle), Identification of surfaces, , Projection of Solid, , (02 sheets), , 5.1. Definition and salient features of Solid, 5.2. Types of Solid (Polyhedron and Solid of revolution), 5.3, To make projections, sources, Top view, Front view and Side view of, various types of Solid., 6., , Sections, , (02 sheets), 37

Page 44 :
38, , 6.1, 6.2, , Importance and salient features, Drawing of full section, half section, partial or broken out sections, Offset, sections, revolved sections and removed sections., , 6.3, , Convention sectional representation of various materials, conventional breaks for, shafts, pipes, rectangular, square, angle, channel, rolled sections, Orthographic sectional views of different objects., , 6.4, 7., , Isometric Views, 7.1, 7.2, , 8., , *9., , Fundamentals of isometric projections and isometric scale., Isometric views of combination of regular solids like cylinder, cone, cube and, prism., , Common Symbols and Conventions used in Engineering, 8.1, 8.2, , (02 sheets), , (02 sheets), , Civil Engineering sanitary fitting symbols, Electrical fitting symbols for domestic interior installations, , Introduction to AutoCAD, , (02 sheets), , Basic introduction and operational instructions of various commands in AutoCAD. At, least two sheets on AutoCAD of cube, cuboid, cone, pyramid, truncated cone and, pyramid, sphere and combination of above solids., * Auto CAD drawing will be evaluated internally by sessional marks and not by final, theory paper., INSTRUCTIONAL STRATEGY, Teacher should show model of realia of the component/part whose drawing is to be made., Emphasis should be given on cleanliness, dimensioning and layout of sheet. Focus should be on, proper selection of drawing instruments and their proper use. The institute should procure, AutoCAD or other engineering graphics software for practice in engineering drawings. Teachers, should undergo training in AutoCAD/Engineering Graphic. Separate labs for practice on, AutoCAD should be established., MEANS OF ASSESSMENT, −, −, −, , Sketches, Drawing, Use of software, , RECOMMENDED BOOKS, 1., , A Text Book of Engineering Drawing by Surjit Singh; DhanpatRai& Co., Delhi, 38

Page 45 :
39, , 2., 3., 4., 5., 6., , Engineering Drawing by PS Gill; SK Kataria& Sons, New Delhi, Elementary Engineering Drawing in First Angle Projection by ND Bhatt; Charotar, Publishing House Pvt. Ltd., Anand, Engineering Drawing I & II by JS Layall; Eagle Parkashan, Jalandhar, Engineering Drawing I by DK Goel, GBD Publication., e-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , 39

Page 46 :
40, , 1.6, , ENGINEERING MECHANICS AND MATERIALS, L T P, 4 - -, , RATIONALE, Engineering Mechanics & Materials Subject is quite essential for a student of electronics, engineering diploma programme. The subject will expose the concept like force analysis,, condition of equilibrium, types of materials to be used in electronic application. Lot of, development has taken place in the field of materials. New materials are being developed and it, has become possible to change the properties of materials to suit the requirements., LEARNING OUTCOMES, After undergoing the subject, the student will be able to:, ● Understand the basic laws and principles of mechanics., ● Able to analyze and solve simple problems related to engineering mechanics., ● Understand the characteristics and properties of different materials used in electronics., DETAILED CONTENTS, 1., , 2., , 3., , 4., , 5., , Introduction, (08 Periods), Mechanics and its utility, Concept of scalar and vector quantities, Effect of a force,, Tension & compression, Rigid body, Principle of physical independence of force,, Principle of transmissibility of a force., Force Analysis, (13 Periods), Concept of coplanar and non-coplanar forces including parallel forces, Concurrent and, non-concurrent forces, Resultant forces, Equilibrium of forces, Law of parallelogram of, forces, Law of triangle of forces and its converse. Law of polygon of forces. Solution of, simple engineering problems by analytical and graphical methods such as simple wall, crane, jib crane and other structures. Determination of resultant of any number of forces, in one plane acting upon a particle, condition of equilibrium of coplanar concurrent force, system., , General Condition of Equilibrium:, (11 Periods), General condition of equilibrium of a rigid body under the action of coplanar forces,, statement of force law of equilibrium, moment law of equilibrium, application of above, on body., Stresses and strains, (12 Periods), Concept of stress and strain, Concept of various types of stresses and strains, Definitions, of tension, compression, shear, bending, torsion. Concept of volumetric and lateral, strains, Poisson’s ratio. Mechanical properties of MS, SS, etc., Materials & Concept Used In Electronics, (12 Periods), (A) Soldering materialsType, chemical composition and properties, Soldering alloy – Tin lead, Tin antimony,, Tin silver, Lead silver, Tin zinc, Different types of flux and their properties, Properties of, plastics materials, Epoxy materials for PCB (Single and multi-layer board), Emulsion, 40

Page 47 :
41, , parameters, Film emulsion, Type of laminates (Phenolic, Epoxy, Polyester, Silicon,, Melamine, Polyamide), Properties of copper clad laminates, Materials (Filler, Resin,, Copper Foil) Photo printing basics for double sided PCB, photo resin materials coating, process materials, Screen printing and its materials Etching agent, Film processing and, used materials., (B) Soldering & Brazing, For black Galvanized and Tin Coated Iron sheet, Brass and copper sheets only., 1. Its concept, comparison with welding as joining method and classification,, electric soldering and forge soldering., 2. Soldering operation – edge preparation of joints, pickling and degreasing,, Fluxing, Tinning and Soldering. Wave soldering, solder mask, Dip soldering,, Drag soldering,, 3. Materials Used-Common fluxes, soft and hard solder, solder wire (Plain and, Resin core) and sticks, spelters and their specifications and description (For, Identification Only), forge soldering bits., 4. Electric soldering iron, other soldering tools., 5. Common defects likely to occurs during and after soldering., 6. Safety of Personnel, Equipment & Tools to be observed., , INSTRUCTIONAL STRATEGY, Engineering mechanics and materials needs to be handled very carefully in such a manner that, students develop clear understanding of basic laws and principles of mechanics. The teacher may, lay more emphasis on numerical analysis and give assignments to inculcate self-study., MEANS OF ASSEMENTS, −, Class Tests, −, Home Assignments, −, Attendance, −, Sessional Test, RECOMMENDED BOOKS, 1., A Text Book of Engineering Mechanics (Applied Mechanics) by R.K. Khurmi;S.Chand, and Co. Ltd. New Delhi, 2., A Text Book of Applied Mechanics by R.K. Rajput;Laxmi Publications., 3., A Text Book of Materials Science by R.K. Rajpur;Katson Publications, Ludhiana, 4., Material Science and Processes by Hazara Chaudhary; Indian Book Distributors, 5., E-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR,, Chandigarh., , 41

Page 48 :
42, , Topic No., , SUGGESTED DISTRIBUTION OF MARKS, Time Allotted, Marks Allotted, (Periods), , (%), , 1., , 8, , 14, , 2., , 13, , 24, , 3., , 11, , 20, , 4., , 12, , 21, , 5., , 12, , 21, , 56, , 100, , Total, , 42

Page 49 :
43, , 1.7GENERAL WORKSHOP PRACTICE – I, (For Electronics Engineering), L T P, - - 8, RATIONALE, In order to have a balanced overall development of diploma engineers, it is necessary to integrate, theory with practice. General workshop practices are included in the curriculum in order to, provide hands-on experience about use of different tools and basic manufacturing practices. This, subject aims at developing general manual and machining skills in the students. In addition, the, development of dignity of labour, safety at work place, team working and development of right, attitude are the other objectives., LEARNING OUTCOMES, After completing the course, the students will be able to:, •, •, •, •, •, •, •, •, , Identify tools and equipment used and their respective functions., Identify different types of materials and their basic properties., Use and take measurements with the help of basic measuring tools/equipment., Select proper tools for a particular operation., Select materials, tools, and sequence of operations to make a job as per given, specification/drawing., Prepare simple jobs independently and inspect the same., Follow safety procedures and precautionary measures., Use safety equipment and Personal Protection Equipment., DETAILED CONTENTS (PRACTICAL EXERCISES), , Note:, , The students are supposed to come in proper workshop dress prescribed by the institute., Wearing shoes in the workshop(s) is compulsory. Importance of safety and cleanliness,, safety measures and upkeep of tools, equipment and environment in each of the, following shops should be explained and practiced. The students should prepare, sketches of various tools/jobs in their practical Notebook., , The following shops are included in the syllabus:, 1, 2, 3, 4, , Fitting Shop, Sheet Metal Shop, Welding Shop, Plumbing Shop, , 43

Page 50 :
44, , 1., , FITTING SHOP, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, , Use of personal protective equipment and safety precautions while working., Basic deburring processes., Introduction to fitting shop tools, marking and measuring devices/equipment., Identification of materials. (Iron, Copper, Stainless Steel, Aluminium etc.), Identification of various steel sections (flat, angle, channel, bar etc.)., Introduction to various fitting shop operations/processes (Hacksawing, Drilling,, Chipping and Filing)., , 1.7, ., , Job Practice, Job I Marking of job, use of marking tools, filing and use of measuring, instruments. (Vernier caliper, Micrometer and Vernier height gauge)., Job II Filing a rectangular/square piece to maintain dimensions within an, accuracy of ±.25 mm., Job IIIMaking a cut-out from a square piece of MS flat using hand hacksaw and, chipping, Job IV Drilling and tapping practice on MS Flat., , 2., , SHEET METAL SHOP, 2.1., , 2.2, 2.3, 2.4, , 2.5, 2.6, , 3., , Introduction to sheet metal shop, use of hand tools and accessories e.g. different types, of hammers, hard and soft mallet, sheet and wire gauge, necessary allowance required, during job fabrication, selection of material., Introduction and demonstration of hand tools used in sheet metal shop., Introduction and demonstration of various machines and equipment used in sheet metal, shop e.g. Shearing Machine, Bar Folder, Burring Machine,, Introduction and demonstration of various raw materials used in sheet metal shop, e.g. black-plain sheet, galvanized-iron plain sheet, galvanised corrugated sheet,, aluminium sheet etc., Study of various types of nuts, bolts, rivets, screws etc., Job Practice, Job I: Shearing practice on a sheet using hand shears., Job II: Practice on making Single riveted lap joint/Double riveted lap Joint., Job III: Practice on making Single cover plate chain type, zig-zag type, and single rivetted Butt Joint., , WELDING SHOP – I, 3.1, , Introduction and importance of welding as compared to other material joining, processes. Specifications and type of welding machines, classification and coding, of electrodes, welding parameters, welding joints and welding positions. Materials, to be welded, safety precautions., 44

Page 51 :
45, , 3.2, , Job Practice, Job I, Job II, Job III, Job IV, , 4., , Practice of striking arc (Minimum 4 beads on 100 mm long M.S., flat)., Practice of depositing beads on plate at different current levels., (Minimum 4 beads on M.S. plate at four setting of current level)., Preparation of lap joint using arc welding process., Preparation of T-joint using gas welding or arc welding, on 100, mm x 6 mm MS Flat, , PLUMBING SHOP, 4.1., 4.2., 4.3., 4.4., Job, , Use of personal protective equipments, safety precautions while working and, cleaning of shop., Introduction and demonstration of tools, equipment and machines used in, plumbing shop., Introduction of various pipes and pipe fittings of elbow, nipple, socket, union etc., Job Practice, 1 : Preparation of job using elbow, bend and nipple, Job II: Preparation of job using Union, Tap, Plug and Socket., Job III: Threading practice on pipe with die, , MEANS OF ASSESSMENT, −, −, , Workshop jobs, Report writing, presentation and viva voce, , RECOMMENDED BOOKS, 1., Workshop Technology I,II,III, by SK Hajra, Choudhary and AK Choudhary; Media, Promoters and Publishers Pvt. Ltd. Mumbai., 2., Workshop Technology Vol. I, II, III by Manchanda; India Publishing House, Jalandhar., 3., Workshop Training Manual Vol. I, II by S.S. Ubhi; Katson Publishers, Ludhiana., 4., Manual on Workshop Practice by K Venkata Reddy; MacMillan India Ltd., New Delhi, 5., Basic Workshop Practice Manual by T Jeyapoovan; Vikas Publishing House (P) Ltd.,, New Delhi, 6., Workshop Technology by B.S. Raghuwanshi; DhanpatRai and Co., New Delhi, 7., Workshop Technology by HS Bawa; Tata McGraw Hill Publishers, New Delhi., 8., e-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , 45

Page 52 :
46, , 2.1, , APPLIED MATHEMATICS - II, L T, 5, -, , P, -, , RATIONALE, Basic elements of integral calculus, differential calculus, numerical methods, differential, equations included in this course will play a vital role in understanding engineering problem, mathematically. This will also develop analytical as well as conceptual abilities among students., LEARNING OUTCOMES, After undergoing this course, the students will be able to:, • Calculate simple integration by methods of integration, • Evaluate the area under curves, surface by using definite integrals., • Calculate the area and volume under a curve along areas, • Solve the engineering problems with numerical methods., • Understand the geometric shapes used in engineering problems by co-ordinate geometry., DETAILED CONTENTS, 1. Integral Calculus - I, , (20 Periods), , Methods of Indefinite Integration:1.1 Integration by substitution., 1.2 Integration by rational function., 1.3, Integration by partial fraction., 1.4, Integration by parts., 1.5 Integration of special function, 2. Integral Calculus – II, 2.1, 2.2, 2.3, , Meaning and properties of definite integrals, Evaluation of definite integrals.., Application : Length of simple curves, Finding areas bounded by simple, curves Volume of solids of revolution, centre of mean of plane areas., Simposns 1/3rd and Simposns3/8th rule and Trapezoidal Rule : their application, in simple cases. Numerical solutions of algebraic equations; Bisections method,, Regula-Falsi method, Newton-Raphson’s method(without proof), Numerical, solutions of simultaneous equations; Gauss elimination method(without proof), , 3. Co-ordinate Geometry (2 Dimension), 3.1, , (20 Periods), , (18 Periods), , Circle, Equation of circle in standard form. Centre - Radius form, Diameter form,, Two intercept form., , 46

Page 53 :
47, , 4. Co-ordinate Geometry (3 Dimension), , (12 Periods), , 4.1 Straight lines and planes in space, Distance between two points in space, direction cosine and direction ratios,, Finding equation of a straight line (without proof), INSTRUCTONAL STRATEGY, Basic elements of Differential Calculus, Integral Calculus and differential equations can be, taught conceptually along with real engineering applications in which particular algorithm and, theory can be applied. Numerical examples will be helpful in understanding the content of the, subject., MEANS OF ASSESSMENT, -, , Assignments and Quiz/Class Tests, Mid-term and End-term Written Tests, Model/Prototype Making, , RECOMMENDED BOOKS, 1., 2., 3, 4., 5., , Elementary Engineering Mathematics by BS Grewal, Khanna Publishers, New Delhi, Engineering Mathematics, Vol I & II by SS Sastry, Prentice Hall of India Pvt. Ltd.,, Applied Mathematics-II by Chauhan and Chauhan, Krishna Publications, Meerut., Applied Mathematics-I (B) by Kailash Sinha and Varun Kumar; Aarti Publication,, Meerut, e-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., SUGGESTED DISTRIBUTION OF MARKS, Topic, Time Allotted, Marks Allotted, (Periods), (%), 1., , 20, , 28, , 2., , 20, , 28, , 3., , 18, , 24, , 4, , 12, , 20, , Total, , 70, , 100, , 47

Page 54 :
48, , 2.2 APPLIED PHYSICS – II, L T P, 5 - 2, RATIONALE, Applied physics includes the study of a diversified topics related to the world around us. It aims, to give an understanding of this world both by observation and by prediction of the way in which, objects behave. Concrete knowledge of physical laws, analysis and applications in various fields, of engineering and technology are given prominence in this course content., Note: Teachers should give examples of engineering/technology applications of various, concepts and principles in each topic so that students are able to learn and appreciate these, concepts and principles. In all contents, SI units should be followed., LEARNING OUTCOMES, After undergoing this subject, the student will be able to;, • Define wave motion its types (Transverse and Longitudinal), Periodic and Simple, Harmonic Motion, solve simple problems., • Define the terms: frequency, amplitude, wavelength, velocity of a wave., • Explain various Engineering, Medical and Industrial applications of Ultrasonics., • Apply acoustics principles to various types of buildings to get best sound effect, • Explain diffraction, interference, polarization., • Define capacitance and its unit. They will be able to explain the function of capacitors in, simple circuits, solve simple problems using C=Q/V, • Explain the role of free electrons in insulators, conductors and semiconductors,, qualitatively the terms: potential, potential difference, electromotive force., • Explain the concept of electric current, resistance and itsmeasurement., • List the effects of an electric current and their common applications, State and apply, Ohm's law, calculate the equivalent resistance of a variety of resistor combinations,, determine the energy consumed by an appliance, distinguish between AC and DC, electricity, • Explain Biot-Savart Law, Ampere’s law, Lorenz Force., • State the laws of electromagnetic induction, describe the effect on a current-carrying, conductor when placed in a magnetic field, • Explain operation of moving coil galvanometer, simple DC motor, • Apply the knowledge of diodes in rectifiers, adapters IC’s and various electronic circuits., Apply the concept of light amplification in designing of various LASER based, instruments and optical sources., • Explain total internal reflection and apply this concept for optical fibre and its uses in, Medical field and Communication., , 1., , DETAILED CONTENTS, Wave motion and its applications, 1.1, , (12 periods), , Wave motion, transverse and longitudinal wave motion with examples, sound and, light waves, relationship among wave velocity, frequency and wave length and its, application, 48

Page 55 :
49, , 1.2, 1.3, , 1.4, 1.5, , 1.6, , 2., , Wave equation y = r sin wt, phase, phase difference, principle of superposition of, waves, Simple Harmonic Motion (SHM): definition and characteristic, expression for, displacement, velocity, acceleration, time period, frequency in S.H.M., Energy of, a body executing S. H. M., simple pendulum, concept of simple harmonic, progressive wave,, Free, Damped and forced oscillations, Resonance with examples, Q-factor, Definition of pitch, loudness, quality and intensity of sound waves, intensity level,, Echo and reverberation, Sabine formula for reverberation time(without, derivation), coefficient of absorption of sound, methods to control reverberation, time and their applications, Accoustics of building defects and remedy., Ultrasonics –production, detection, properties and applications in engineering and, medical applications., , Wave Optics, , (6 periods), , 2.1, , Dual nature of light, wave theory of light, laws of reflection and refraction,, Snell’s law, Power of lens, magnification., 2.2, ,Two-Source Interference, Double-Slitinterference, Interference dueto thin films,, Fresnel’s biprism., 2.3, use of interference making highly efficient solar panel., diffraction, Single Slit diffraction, Intensity calculation etc, 2.4, 2.5, Polarization of electromagnetic waves,polarizing sheets, polarizing by, Reflection (Brewser’s law), Malus law, use of polariods., 3., , Electrostatics, , (12 periods), , 3.1, , 4., , Concept of charge, Coulombs law, Electric field of point charges, Electric lines, of force and their properties, Electric flux, Electric potential and potential, difference., 3.2, Gauss law of electrostatics: Application of Gauss law to find electric field, intensity of straight charged conductor, plane charged sheet and charged sphere., 3.3, Capacitor and its working principle, Capacitance and its units. Capacitance of, parallel plate capacitor. Series and parallel combination of capacitors, (numericals), charging and discharging of a capacitor., 3.4, Dielectric and its effect on capacitance, dielectric break down., 3.5, Application of electrostatics in electrostatic precipitation of microbes and, moisture separation from air and gases in industry for pollution control (Brief, explanation only), Current Electricity, (12 periods), 4.1, , 4.2, , Electric Current, Resistance, Specific Resistance, Conductance, Specific, Conductance, Series and Parallel combination of Resistances. Factors affecting, Resistance, Colour coding of carbon Resistances, Ohm’s law. Superconductivity., Kirchhoff’s laws, Wheatstone bridge and its applications (meter bridge and slide, wire bridge), 49

Page 56 :
50, , 4.3, 4.4, 4.5, , 5., , Magneto Statics and Electromagnetism, 5.1, 5.2, 5.3, 5.4, 5.5, 5.6, , 6., , 7., , Concept of terminal potential difference and Electro motive force (EMF),, potentiometer., Heating effect of current, Electric power, Electric energy and its units (related, numerical problems), Advantages of Electric Energy over other forms of energy, Examples of application of DC circuits in various electrical and electronics, equipment such as C.R.O, T.V., Audio-Video System, Computers etc., (12 periods), , Magnetic poles, force on a moving charge, circulating charges, force on a current, carrying wire, Hall effect, torque on a current loop., Magnetic field due to moving charge(Biot-Savart Law), due to current (Biot-Savart, Law), parallel currents, field of a solenoid, Ampere’s law., Faraday’s law, Lenz’ law, motional emf, induced electric fields., Magnetic dipole and force on a magnetic dipole in a non-uniform field,, Magnetization, Gauss’ law for magnetism., Types of magnetic materials. Dia, para and ferromagnetic materials with their, properties,, Application of electromagnetism in ac/dc motors and generators., , Semiconductor physics, (8 periods), 6.1, Types of materials (insulator, semi conductor, conductor), intrinsic and extrinsic, semiconductors, p-n junction diode and its V-I characteristics, 6.2, Diode as rectifier – half wave and full wave rectifier (centre taped),, 6.3, Semiconductor transistor, pnp and npn (concepts only), 6.4, Application of semiconductor diodes (Zener, LED) and that of transistor as, amplifier and oscillator., Modern Physics, , (8 Periods), , 7.1, , Lasers: concept of energy levels, ionizations and excitation potentials;, spontaneous and stimulated emission; laser and its characteristics, population, inversion, Types of lasers; Ruby and He-Ne lasers, engineering and medical, applications of lasers., 7.2, Fibre optics: Total internal reflection and its applications, Critical angle and, conditions for total internal reflection, introduction to optical fibers, light, propagation, types, acceptance angle and numerical aperture, types and, applications of optical fibre in communication., 7.3, Introduction to nanotechnology, nanoparticles and nano materials,, LIST OF PRACTICALS (To perform minimum six experiments), 1., To determine the velocity of sound with the help of resonance tube., 2., To find the focal length of convex lens by displacement method., 3., To find the refractive index of the material of given prism using spectrometer., 4., To find the wavelength of sodium light using Fresnel’s biprism., 5., To verify laws of resistances in series and parallel combination, 6., To verify ohm’s laws by drawing a graph between voltage and current., 50

Page 57 :
51, , 7., 8., 9., 10., 11., 12., , To measure very low resistance and very high resistances using Slide Wire bridge, Conversion of Galvanometer into an Ammeter and Voltmeter of given range., To draw hysteresis curve of a ferromagnetic material., To draw characteristics of a pn junction diode and determine knee and break down, voltages., To find wave length of the laser beam., To find numerical aperture of an optical fiber., , INSTRUCTIONAL STATREGY, Teacher may use various teaching aids like live models, charts, graphs and experimental kits etc., for imparting effective instructions in the subject. The teacher should explain about field, applications before teaching the basics to develop proper understanding of the physical, phenomenon. Use of demonstration and animations can make the subject interesting and may, develop scientific temper in the students. Teacher must plan a tour of Science Park/planetarium, available in nearby areas in order to enhance the interest in this course., MEANS OF ASSESSMENT, −, Assignment & Quiz,, −, Mid-Term and End-Term written test,, −, Model Making,, −, Actual Lab & Practical Work,, −, Viva-Voice, RECOMMENDED BOOKS, 1., Text Book of Physics (Part-I, Part-II); N.C.E.R.T., Delhi, 2., Concepts in Physics by HC Verma, Vol. I & II, Bharti Bhawan Ltd. New Delhi, 3., A Text Book of Optics, Subramanian and BrijLal, S Chand & Co., New Delhi, 4., Practical Physics, by C. L. Arora, S Chand publications, 5., Engineering Physics by PV Naik, Pearson Education Pvt. Ltd, New Delhi, 6., Modern Engineering Physics by SL Gupta, Sanjeev Gupta, DhanpatRai Publications., 7., Physics Volume 2, 5th edition, HalidayResnick and Krane, Wiley publication, 8., Fundamentals of Physics by Haliday, Resnick& Walker 7th edition, Wiley publication, 9., e-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , 51

Page 58 :
52, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., , Time Allotted, (Periods), , Marks Allotted, (%), , 1, 2, 3, 4, 5, 6, 7, , 12, 6, 12, 12, 12, 8, 8, , 18, 8, 18, 16, 16, 12, , Total, , 70, , 12, 100, , 52

Page 59 :
53, , 2.3, , BASICS OF INFORMATION TECHNOLOGY, L T P, - - 6, , RATIONALE, Information technology has great influence on all aspects of life. Primary purpose of using, computer is to make the life easier. Almost all work places and living environment are being, computerized. The subject introduces the fundamentals of computer system for using various, hardware and software components. In order to prepare diploma holders to work in these, environments, it is essential that they are exposed to various aspects of information technology, such as understanding the concept of information technology and its scope; operating a, computer; use of various tools using MS Office/Open Office/Libre Office using internet etc.,, form the broad competency profile of diploma holders. This exposure will enable the students to, enter their professions with confidence, live in a harmonious way and contribute to the, productivity., Note:, Explanation of Introductory part should be demonstrated with practical work. Following, topics may be explained in the laboratory along with the practical exercises. There will not, be any theory examination., LEARNING OUTCOMES, After undergoing the subject, the students will be able to:, •, •, •, •, •, •, •, •, •, •, •, •, , Identify Computer Hardware Components, Network Components and Peripherals., Explain the role of an Operating System., Install System and Application Software., Explain the function of the system components including Processor, Motherboard and, Input-output devices., Use Word Processing Software to prepare document., Use Spreadsheet Software to create workbooks and automate calculation., Use Presentation Software to create interactive presentation., Perform fundamental tasks common to most application software including print, scan,, save, edit, cut, copy, paste, format, spell and grammar check., Find and evaluate information on the Web., Install Antivirus., Safeguard against Online Frauds, threats and crimes., Use online office tools(Google suits), , 53

Page 60 :
54, , TOPICS TO BE EXPLAINED THROUGH DEMONSTRATION, 1., , Introduction to Computers and Peripherals., Components of Computer, Types of Computer, CPU, RAM, ROM, Hard disk, USB,, Flash drive, CD, DVD,Blue ray, Keyboard, Mouse, Monitor, LCD, Printer, Plotter,, Scanner, Modem, Sound Cards, Speakers, CMOS battery, Sharing of Printers., , 2., , Operation System and Application Software, System Software, Application Software, Virtualization Software, Utility Software, MS, Office/Open Office/Libreoffice, Working with window, Desktop components, Menu, bars, creating shortcut of program. Installation of Application softwares, Antivirus and, Drivers., , 3., , Word Processing, Spreadsheet and Presentation, Usage and creation of word document, spreadsheets and presentation, Google Suits, (Google drive, google sheet, google doc. Google presentation), , ., 4., , Internet, Basics of Networking – LAN, WAN, Wi-Fi technologies, Concept of IP Addrsses, DNS,, Search Engines, e-mail, Browsing and cyber laws., , LIST OF PRACTICAL EXERCISES, , ., , 1. Identify various components, peripherals of computer and list their functions., 2. Installation of various application software and peripheral drivers, 3. Installation of operating system (windows/linux/others), 4. Creation and Management (Rename, delete, search of file and folders), 5. Installation of Antivirus and remove viruses, 6. Scanning and printing documents, 7. Browsing, Downloading, Information using Internet, 8. E-Mail ID creation, comparing, sending and receiving e-mail. Attaching a file with, e-mail message., 9. Word Processing (MS Office/Open Office), a) File Management:, • Opening, creating and saving a document, locating files, copying contents in, some different file(s), protecting files, giving password protection for a file, b) Page set up:, • Setting margins, tab setting, ruler, indenting, , 54

Page 61 :
55, , c) Editing a document:, • Entering text, cut, copy, paste using tool- bars, d) Formatting a document:, • Using different fonts, changing font size and colour, changing the appearance, through bold/italic/underlined, highlighting a text, changing case, using, subscript and superscript, using different underline methods, • Aligning of text in a document, justification of document, inserting bullets and, numbering, • Formatting paragraph, inserting page breaks and column breaks, line spacing, • Use of headers, footers: Inserting footnote, end note, use of comments,, autotext, • Inserting date, time, special symbols, importing graphic images, drawing tools, e) Tables and Borders:, • Creating a table, formatting cells, use of different border styles, shading in, tables, merging of cells, partition of cells, inserting and deleting a row in a, table, • Print preview, zoom, page set up, printing options, • Using find, replace options, f) Using Tools like:, • Spell checker, help, use of macros, mail merge, thesaurus word content and, statistics, printing envelops and lables, • Using shapes and drawing toolbar,, • Working with more than one window., 10. Spread Sheet Processing (MS Office/Open Office/Libre Office), a), b), , c), , d), , Starting excel, open worksheet, enter, edit, data, formulae to calculate values,, format data, save worksheet, switching between different spread sheets, Menu commands:, Create, format charts, organise, manage data, solving problem by analyzing, data. Programming with Excel Work Sheet, getting information while working, Work books:, Managing workbooks (create, open, close, save), working in work books,, selecting the cells, choosing commands, data entry techniques, formula, creation and links, controlling calculations, Editing a worksheet, copying, moving cells, pasting, inserting, deletion cells,, rows, columns, find and replace text, numbers of cells, formatting worksheet,, conditional formatting, Creating a chart:, Working with chart types, changing data in chart, formatting a chart, use chart, to analyze data, Using a list to organize data, sorting and filtering data in list, , 55

Page 62 :
56, , e), f), , Retrieve data with query:, Create a pivot table, customizing a pivot table. Statistical analysis of data, Exchange data with other application:, Embedding objects, linking to other applications, import, export, document., , 11. PowerPoint Presentation (MS Office/Open Office/Libre office), a), , b), c), , d), , 12., , Introduction to PowerPoint, How to start PowerPoint, Working environment: concept of toolbars, slide layout &, templates., Opening a new/existing presentation, Different views for viewing slides in a presentation: normal, slide, sorter., Addition, deletion and saving of slides, Insertion of multimedia elements, Adding text boxes, Adding/importing pictures, Adding movies and sound, Adding tables and charts etc., Adding organizational chart, Editing objects, Working with Clip Art, Formatting slides, Using slide master, Text formatting, Changing slide layout, Changing slide colour scheme, Changing background, Applying design template, , Google Suits, Using Google drive, Google shut, Google docs, Google slides., , INSTRUCTIONAL STRATEGY, Since this subject is practice oriented, the teacher should demonstrate the capabilities of, computers to students while doing practical exercises. The students should be made familiar, with computer parts, peripherals, connections and proficient in making use of MS Office/Open, Office/Libre office/Google Suit in addition to working on internet. The student should be made, capable of working on computers independently., , 56

Page 63 :
57, , MEANS OF ASSESSMENT, -, , Class Tests/Quiz, Software Installation and Use, Viva-Voce, Presentation, , RECOMMENDED BOOKS, 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., , Fundamentals of Computer by V Rajaraman; Prentice Hall of India Pvt. Ltd., New Delhi, Information Technology for Management by Henery Lucas, Tata McGraw Hills, New, Delhi, Computers Fundamentals Architecture and Organisation by B Ram, revised Edition, New, Age International Publishers, New Delhi, Computers Today by SK Basandara, Galgotia publication Pvt Ltd. Daryaganj, New, Delhi., Internet for Every One by Alexis Leon and Mathews Leon; Vikas Publishing House Pvt., Ltd., Jungpura, New Delhi, A First Course in Computer by Sanjay Saxena; Vikas Publishing House Pvt. Ltd.,, Jungpura, New Delhi, Computer Fundamentals by PK Sinha; BPB Publication, New Delhi, Fundamentals of Information Technology by Leon and Leon; Vikas Publishing House, Pvt. Ltd., Jungpura, New Delhi, On Your Marks - Net…Set…Go… Surviving in an e-world by AnushkaWirasinha,, Prentice Hall of India Pvt. Ltd., New Delhi, Fundamentals of Information Technology by Vipin Arora, Eagle Parkashan, Jalandhar, e-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , Online Resources, 1., www. tutorialspoint..com, www.sf.net, 2., 3., Gsuite.google.com, 4., Spoken-tutorial.org, 5., Swayam.gov.in, , 57

Page 64 :
58, , 2.4 ELECTRICAL ENGINEERING-I, L T P, 4 - 4, RATIONALE, The objective of this subject is to impart fundamental knowledge and skills regarding basic, electrical engineering, which diploma holders will come across in their professional life. This, course will provide the student to understand the basic concept and principles of dc and ac, fundamentals, electromagnetism, batteries, electrical materials, electrical safety etc., LEARNING OUTCOMES, After undergoing the subject, the student will be able to:, •, •, •, •, •, •, , Classify various materials into conductor, semiconductor and insulator., Describe the properties of conducting, insulating and magnetic materials., Understand Kirchhoff’s laws to solve simple DC circuit., Understand various network theorems such as Thevenin’s theorem, Norton theorem, and, superposition theorem to solve simple circuit problems., Understand AC Circuit Theory., Understand construction, rating & safety measures for batteries., DETAILED CONTENTS, , 1. Classification, , (2 Periods), , Classification of materials into conducting materials, insulating materials and Semiconducting materials with reference to their atomic structures., , 2. Conducting Materials, 2.1, , (6 Periods), , Resistivity and factors affecting resistivity such as temperature, alloying and, mechanical stressing., , 2.2, , Classification of conducting materials into low resistivity and high resistivity, materials. Some examples of each and their typical applications., , 3. Insulating Materials, 3.1, , (10 Periods), , Electrical Properties:, Volume resistivity, surface resistance, Dielectric loss, Dielectric strength (Break, down voltage) and Dielectric constant., , 58

Page 65 :
59, , 3.2., 3.3, , 3.4, , Chemical Properties:, Solubility, Chemical resistance and Weatherability., Physical Properties:, Hygroscopicity, Tensile and Compressive strength, Abrasive resistance,, Brittleness., Thermal Properties:, Heat resistance, classification according to permissible temperature rise, Effect of, electrical overloading on the life of an electrical appliance., , 3.5, , Plastic Insulating Materials:, Classification into thermoplastic and thermosetting categories, example of each, and their typical applications., 4. Magnetic Materials, (4 Periods), 4.1, Ferromagnetism, Domains, permeability, hysteresis loop-(including coercive, force and residual magnetism) and magnetic saturation., 4.2, Soft and Hard magnetic materials, their examples and typically applications., 5. Electro Magnetism, (8 Periods ), 5.1, Concept of mmf, flux, reluctance and permeability., 5.2, Energy stored in a magnetic field and an inductor., 5.3, Solution of problems on magnetic circuits., 5.4, Faraday’s laws of electromagnetic induction, Lenz’s law, Physical explanation of, self and mutual inductance., 5.5, B-H curve, Hysteresis, Eddy currents-elementary ideas and significance., 5.6, Growth and decay of current in an inductive circuit., 5.7, Force between two parallel current carrying conductors and its significance., 5.8, Current carrying conductors in magnetic field and its significance, 6. D.C Circuits, (11 Periods), 6.1, Ohm’s law, resistivity, effect of temperature on resistances, heating effect of, electric current, conversion of mechanical units into electrical units., 6.2, Kirchhoff’s laws, application of Kirchhoff laws to solve simple dc circuits., 6.3, Thevenin’s theorem, maximum power transfer theorem, Norton’s theorem and, super position theorem, simple numerical problems., , 7., , A.C Theory, , (11 Periods), , 7.1, , Concept of alternating voltage and current, difference between AC and DC ., , 7.2, 7.3, , Generation of alternating voltage, equation of sinusoidal waveform., Definition and concept of cycle, frequency, Time period, amplitude, instantaneous, value, average value, RMS value, peak value, form factor, Peak factor., Phase and phase difference, representation of alternating quantities by phasor,, addition and subtraction of alternating quantities., , 7.4, , 59

Page 66 :
60, , 8. Batteries, 8.1, 8.2, 8.3, 8.4, 8.5, , (4 Periods), Construction of lead acid and nickel cadmium batteries., Charging and maintenance of batteries., Rating of batteries., Back up batteries (Lithium & Silver Oxide batteries)., Shelf life of batteries., , LIST OF PRACTICALS, 1. Ohm’s law verification., 2. To verify the laws of series and parallel connection of resistance i.e. to verify:i., , Total resistance in series connections., , ii., , RT= R1+ R2 + R 3……., Where RT is total resistance and R1, R2, R3 etc. are the resistances connected, in series., Total resistance in parallel connections., , 1/RT=1/R1 + 1/R2 + 1/R3………., Where RT is total resistance and R1, R2, R3 etc. are the resistances connected, in parallel circuit., 3. To verify the laws of series and parallel connection of capacitance i.e. to verify:i., , Total capacitance in series connections., , ii., , 1/CT=1/C1 + 1/C2 + 1/C3………., Where CT is total capacitance and C1, C2, C3 etc. are the capacitances, connected in series., Total capacitance in parallel connections., , CT= C1+ C2 + C 3……., Where CT is total capacitance and C 1, C2, C3 etc. are the capacitances, connected in parallel., 4. To verify Kirchhoff’s following laws:i., The algebraic sum of the currents at a junction is zero., ii., , The algebraic sum of the emf in any closed circuit is equal to the algebraic sum of, IR products (drops) in that circuit., , 5. To measure the resistance of an ammeter and a voltmeter and to conclude that ammeter, has very low resistance whereas voltmeter has very high resistance., 6. To verify Thevenin’s and maximum power transfer theorems., 7. To find the ratio of inductance values of a coil having air core and iron core respectively, and thus see that by the introduction of magnetic material inside the coil, the induction, value of coil is substantially increased., , 60

Page 67 :
61, , 8. To test a battery for charged and discharged condition and to make connections for its, charging., 9. To show that the range of an ammeter (dc and ac) and a voltmeter (dc and ac ) can be, extended with the use of shunts and multipliers., 10. To convert the given galvanometer into voltmeter and an ammeter., INSTRUCTIONAL STRATEGY, The teachers should give emphasis on understanding of concept and various terms used in the, Electrical Engineering. Practical exercises will reinforce various concepts., ASSESSMENT TOOLS, −, Class Tests, −, Home Assignments, −, Attendance, −, Sessional Test, , RECOMMENDED BOOKS, 1., 2., 3., 4., , Electrical Technology by B L Thareja; S Chand & Co., Basic Electrical Engineering by J B Gupta; S K Kataria and Sons, New Delhi, Basic Electrical Engineering by J S Katre; Technical Max. Publication Pune, e-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , 61

Page 68 :
62, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., , No. of Periods, , Marks (%), , 1., , 02, , 04, , 2., , 06, , 11, , 3., , 10, , 18, , 4., , 04, , 07, , 5., , 08, , 13, , 6., , 11, , 20, , 7., , 11, , 20, , 8., , 04, , 07, , Total, , 56, , 100, , 62

Page 69 :
63, , 2.5 ELECTRONIC COMPONENTS & DEVICES, L T P, 6 -, , 6, RATIONALE, Knowledge of Electronic components & devices is quite essential for a student of electronic, engineering diploma programme. With the knowledge of these active and passive components he, will work successful in every field of the branch. Therefore a diploma student in electronics, engineering must be equipped with the fundamental knowledge about electronic components,, voltage and current source, semi conductor diode, transistors and FET for successful handling of, industrial problems., LEARNING OUTCOMES, After undergoing the subject, the student will be able to:, • Indentify and distinguish between active components (BJT, FET etc) and passive, components (Resistor, Capacitor, inductor etc)., • Understand voltage and current sources as well as their interconversions., • Understand the working and application of semiconductor diode including half wave, rectifier & Full wave rectifier., • Understand the working of BJT and hence able to design amplifier using it., • Compare various transistors biasing circuit and stabilize their operating points., • Understand the working of FET and hence able to design amplifier using it., • Compare BJJT, JFET, MOSFET & CMOS., , 1., , 2., , 3., , DETAILED CONTENTS, Introduction to Electronics, (06 Periods), 1.1, Application of electronic in different fields., 1.2 Brief introduction to active components and devices., Passive Components, (12 Periods), 2.1. Resistor- Working characteristics/properties, Resistors-Carbon film, metal-film,, carbon composition, wire wound and variable type (presets and potentiometers), constructional details, characteristics (size, voltage, tolerance temperature and, frequency dependence) , noise consideration, specification, Testing, mutual, comparison and typical applications, Voltage Dependent Resistor (VDR)., 2.2. Capacitors- Working characteristics/properties, Capacitors-polyester, Metalized, polyester, ceramic paper mica and electrolytic tantalum and solid aluminium types;, construction details and testing, specifications, mutual comparison & typical, applications., 2.3. Inductors, Transformers and RF coils- Working characteristics/properties Methods, of manufacture of inductors, RF coils and small power and AF transformer and, their testing, Properties of cores, Needs and type of shielding., Voltage And Current Sources, (06 Periods), 3.1. Concept of constant voltage sources, symbol and graphical representation,, characteristics of ideal and practical voltage sources., 63

Page 70 :
64, , 3.2. Concept of constant current source, symbol and graphical representation,, characteristics of ideal and practical current sources., 3.3 Conversion of voltage sources into a current sources and vice-versa., 3.4 Concept of floating and grounded D.C. supplies., 4., , Semiconductor Diode, , (12 Periods), , 4.1. P-N junction diode, Mechanism of current flow in P-N junction, drift and diffusion, currents, depletion layer, potential barriers, P-N junction diode characteristics,, Zener& avalanche breakdown, Concept of junction capacitance in forward &, reverse bias conditions., 4.2. Semiconductor diode characteristics, dynamic resistance & their calculation from, diode characteristics, dynamic resistance of diode in terms of diode current,, Variation of leakage current and forward voltage with temperature (No derivations)., 4.3 Diode (P-N Junction) as rectifier, Half wave rectifier, full wave rectifier including, bridge rectifier, relationship between D.C output voltage and A.C input voltage,, rectification efficiency and ripple factor for rectifier circuits, filter circuits- shunt, capacitor, series inductor, bleeder resistance, working of the filter and typical, application of each type, 4.4. Different types of diodes, characteristics and typical application of power diodes,, zener diodes, varactor diodes, point contact diodes, tunnel diodes, LEDs and photo, diodes, 4.5. Important specification of rectifier diode and zener diode., 5., , Introduction to Bipolar Transistor:, , (12 Periods), , 5.1. Concept of bipolar transistor as a two junction three terminal device having two, kinds of charge carriers, PNP an NPN transistor, their symbol and mechanism of, current flow, explanation of fundamental current relations, Concept of leakage, current, effect of temperature on leakage current, Standard notation for current and, voltage polarity., 5.2. CB, CE and CC configurations., a. Common base configuration (CB): input and output characteristics,, determination of transistor parameters (input and output) dynamic resistance,, current amplification factor., b. Common emitter configuration (CE): current relations in CE configuration,, collector current in term of base current and leakage current (ICEO), relationship between the leakage current in CB and CE configuration , input, and output characteristics, determination of dynamic input and output, resistance and current amplification factor β from the characteristics., c. Common collector configuration (CC): Expression for emitter current in, terms of base current and leakage current in CC configuration., , 64

Page 71 :
65, , 5.3. Comparison of CB and CE configuration with regards to dynamic input and output, resistance, current gain and leakage current performance of CE configuration for low, frequency voltage amplification, Typical application of CB configuration in, amplification., 5.4. Transistor as an amplifier in CE configuration., a. DC load line, its equation and drawing it on collector characteristics., b. Determination of small signal voltage and current gain of basic transistor, amplifier using CE output characteristics and DC load line, Concept of power, gain as a product of voltage gain and current gain., 6., , Transistor Biasing And Stabilization Of Operating Point, (09 Periods), 6.1. Different transistor biasing circuits for fixing the operating points, effect of, temperature on operating point., Need and method for stabilization of operating point., Effect of fixing operating point in cut-off or saturation region on performance of, amplifier, 6.2. Calculation of operating point for different biasing circuits, use of Thevenin’s, theorem in analyzing potential divider biasing circuit., 6.3. Simple design problems on potential divider biasing circuits., , 7., , Single Stage Transistor Amplifier, (09Periods), 7.1. Analysis of Single Stage CE, CB and CC amplifier., 7.2. Single stage CE amplifier circuits with proper biasing components., 8., Field Effect Transistor (Fet), (06 Periods), 8.1. Construction, operation, characteristics and Biasing of Junction FET., 8.2. Analysis of Single Stage CS,CG and CD amplifiers. (Only Brief Idea), 9., MOSFET, (06 Periods), 9.1 Construction, operation, Characteristics and Biasing of MOSFET in both depletion, and enhancement modes., 9.2 Analysis of Single Stage CS, CG and CD amplifiers. (Only Brief Idea), 10., CMOS, (06 Periods), 10.1 Construction, operation and Characteristics of CMOS in both depletion and, enhancement modes., 10.2 Use of CMOS as Invertor, Different application of CMOS, CMOS IC., 10.3 Comparison of JEET, MOSFET and Bipolar Transistor., LIST OF PRACTICALS, 1. Identification of types of packages, terminals and noting different ratings using data, books for various types of semiconductor diodes (Germanium, point contact, silicon low, power, high power and switching diode)., 2. Familiarization with lab instruments (Multi-meter/CRO), etc., 3. Testing of various passive and active components., 65

Page 72 :
66, , 4. Plotting of forward V-1 characteristics for a point contact and P-N junction diode (Silicon, & Germanium diode)., 5. To Plot forward and reverse V-I characteristics for a zener diode., 6. Rectifier circuits using semiconductor diode, measurement of input and output voltage, and plotting of input and output wave shapes., i) Half wave rectifier, ii) Full wave rectifier (centre tapped and bridge rectifier circuits), 7. To Plot wave shapes of a full wave rectifier with shunt capacitor, series inductor and, filter circuit., 8. To Plot the input and output characteristics and calculation of parameters of a transistor, in common base configuration, 9. To Plot input and output characteristics and calculation of parameters of a transistor in, common emitter configuration., 10. Transistor Biasing circuits, i) Measurement of operating point (Ic&Vce) for a fixed bias circuit., ii) Potential divider biasing circuits., (Measurement can be made by changing the transistor in the circuits by another of a, same type number)., 11. Plot the FET characteristics and determination of its parameters from these, characteristics., 12. Measurement of voltage gain at 1 KHZ for different load resistance for a BJT amplifier, circuit., 13. Measurement of voltage gain for a JFET amplifier circuit., 14. Measurement of voltage gain for a MOSFET amplifier circuit., INSTRUCTIONAL STRATEGY, Electronic Components & Devices being a fundamental subject, it needs to be handled very, carefully and in a manner such that students develop clear understanding of the related concepts, and principles. The teacher may lay more emphasis on laboratory work and give home, assignments to students to inculcate self study and problem solving abilities amongst them., MEANS OF ASSESSMENT, −, Class Tests, −, Home Assignments, −, Attendance, −, Sessional Test, RECOMMENDED BOOKS, 1., Bhargava, Kulshreshttha& Gupta – “Basic Electronics& Linear Circuits” – Tata Mcgraw-Hill., 2., Malvino, A. P.-“Electronics Principles” –Tata Mcgraw-Hill, 3., Robert.L.Boylestad – “Electronic Devices & Circuits Theory” – Pearson Publication., 4., V.K.Mehta- “Principles of electronics” – S.Chand Publication., 5., e-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , 66

Page 73 :
67, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., Period Allotted, Marks Allotted, (%), 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., Total, , 6, 12, 6, 12, 12, 9, 9, 6, 6, 6, , 7, 14, 7, 14, 15, 11, 11, 7, 7, 7, , 84, , 100, , 67

Page 74 :
68, , 2.6 GENERAL WORKSHOP PRACTICE –II, (For Electronics Engineering), L T P, - - 8, RATIONALE, In order to have a balanced overall development of diploma engineers, it is necessary to integrate, theory with practice. General workshop practices are included in the curriculum in order to, provide hands-on experience about use of different tools and basic manufacturing practices. This, subject aims at developing general manual and machining skills in the students. In addition, the, development of dignity of labour, safety at work place, team working and development of right, attitude are the other objectives., LEARNING OUTCOMES, After completing the course, the students will be able to:, •, •, •, •, •, •, •, •, , Identify tools and equipment used and their respective functions., Identify different types of materials and their basic properties., Use and take measurements with the help of basic measuring tools/equipment., Select proper tools for a particular operation., Select materials, tools, and sequence of operations to make a job as per given, specification/drawing., Prepare simple jobs independently and inspect the same., Follow safety procedures and precautionary measures., Use safety equipment and Personal Protection Equipment., DETAILED CONTENTS (PRACTICAL EXERCISES), , Note:, , The students are supposed to come in proper workshop dress prescribed by the institute., Wearing shoes in the workshop(s) is compulsory. Importance of safety and cleanliness,, safety measures and upkeep of tools, equipment and environment in each of the, following shops should be explained and practiced. The students should prepare, sketches of various tools/jobs in their practical Notebook., , The following shops are included in the syllabus:, 1., 2., 3., 4., , Carpentry Shop, Painting and Polishing Shop, Electroplating Shop, Computer Shop, , 68

Page 75 :
69, , 1., , CARPENTRY SHOP, 1.1, , General Shop Talk, 1.1.1 Name and use of raw materials used in carpentry shop : wood &, alternative materials, 1.1.2 Names, uses, care and maintenance of hand tools such as different types of, Saws, C-Clamp, Chisels, Mallets, Carpenter's vices, Marking gauges,, Try-squares, Rulers and other commonly used tools and materials used in, carpentry shop by segregating as cutting tools, supporting tools, holding, tools , measuring tools etc., 1.1.3 Specification of tools used in carpentry shop., 1.1.4 Different types of Timbers, their properties, uses & defects., 1.1.5 Seasoning of wood., , 1.2., , Practice, 1.2.1 Practices for Basic Carpentry Work, 1.2.2 Sawing practice using different types of saws, 1.2.3 Assembling jack plane — Planning practice including sharpening of jack, plane cutter, 1.2.4 Chiselling practice using different types of chisels including sharpening of, chisel, 1.2.5 Making of different types of wooden pin and fixing methods. Marking, measuring and inspection of jobs., , 1.3, , Job Practice, Job 1, Job II, Job III, Job IV, , 1.4., , 2., , Marking, sawing, planning and chiselling and their practice, Half Lap Joint (cross, L or T – any one), Mortise and Tenon joint (T-Joint), Dove tail Joint (Lap or Bridle Joint), , Demonstration of job showing use of Rip Saw, Bow saw and Tenon saw, method, of sharpening various saws., , PAINTING AND POLISHING SHOP, 2.1., , 2.2., , Introduction of paints, varnishes, Reason for surface preparation, Advantages of, Painting, other method of surface coating ie. Electroplating etc., Job Practice, Job 1: To prepare a wooden surface for painting apply primer on one side and to, paint the same side. To prepare french polish for wooden surface and, polish the other side., , 69

Page 76 :
70, , Job II: To prepare metal surface for painting, apply primer and paint the same., Job III: To prepare a metal surface for spray painting, first spray primer and paint, the same by spray painting gun and compressor system., The sequence of polishing will be as follows:, i), ii), iii), , 3., , ELECTROPLATING SHOP, 3.1., 3.2., 3.3, , 4., , Abrasive cutting by leather wheel, Polishing with hard cotton wheel and with polishing material, Buffing with cotton wheel or buff wheel., , Use of personal protective equipments and safety precautions while working., Introduction and demonstration of machines and equipment used in electroplating, shop, Practice Job, Job I : Electroplating practice i.e. Nickel plating, , COMPUTER SHOP, 4.1, , 4.2, , 4.3, , 4.4, , 4.5, , Keyboard, 4.1.1 Types of Keyboards, 4.1.2 Interfacing (PS2, USB port, DIN connector), 4.1.3 Working, Mouse, 4.2.1 Types of Mouse, 4.2.2 Interfacing (serial, PS2, USB), 4.2.3 Working, Printers, 4.3.1 Types (Dot matrix, Inkjet, Laserjet), 4.3.2. Interfacing (parallel port, USB port, Networking), 4.3.3. Working, 4.3.4. Maintenance (cartridge change etc), 4.3.5 Installation of printers, 4.3.6 Troubleshooting (Driver compatibility, Paper jam, printing problems due, to uncleaned drum in laserjet printers, belt related problems in inkjet, printer, jets choking problem in inkjet printer, color alignment problem)., 4.3.7 Tracing network printer and sharing it., Scanner, 4.4.1 Types, 4.4.2 Interfacing, 4.4.3 Scanning a document, Monitor, 4.5.1 Types and Interfacing, 70

Page 77 :
71, , 4.5.2, , Fault finding and repairing, , 4.6 CPU, 4.6.1. Motherboard connection (dimensions, processor, chipset, BIOS, EFI, (Extended Firmware Interfacing), UFI (Unified Firmware Interfacing)., 4.6.2 SMPS-AT, −, Working, −, Voltage levels, MEANS OF ASSESSMENT, −, −, , Workshop jobs, Report writing, presentation and viva voce, , RECOMMENDED BOOKS, 1., Workshop Technology I,II,III, by SK Hajra, Choudhary and AK Choudhary; Media, Promoters and Publishers Pvt. Ltd. Mumbai., 2., Workshop Technology Vol. I, II, III by Manchanda; India Publishing House, Jalandhar., 3., Workshop Training Manual Vol. I, II by S.S. Ubhi; Katson Publishers, Ludhiana., 4., Manual on Workshop Practice by K Venkata Reddy; MacMillan India Ltd., New Delhi, 5., Basic Workshop Practice Manual by T Jeyapoovan; Vikas Publishing House (P) Ltd.,, New Delhi, 6., Workshop Technology by B.S. Raghuwanshi; DhanpatRai and Co., New Delhi, 7., Workshop Technology by HS Bawa; Tata McGraw Hill Publishers, New Delhi., 8., e-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , 71

Page 78 :
72, , 3.1, , APPLIED MATHEMATICS –III, L T, , P, 5, , -, , -, , RATIONALE, Contents of this course provide understanding of some elementary and advanced mathematics, algorithms and their applications of solving engineering problems. Content of this course will, enable students to use some advanced techniques like Beta-Gamma function, Fourier series,, Laplace transform and probability distributions in solving complex engineering problems., , LEARNING OUTCOMES, After undergoing this course, the students will be able to:, •, •, •, •, •, •, •, •, , Understand matrix operations and uses of matrix in different problems., Apply elementary row and column operations in finding inverse of a matrix., Find Eigen values, Eigen vectors of a matrix and their different properties., Understand degree/order of differential equations and their solution techniques., Use differential equations in engineering problems of different areas., Find Fourier series expansion of a function, Apply Laplace transform and their applications in solving engineering problems., Understand concept of probability distribution and their applications., DETAILED CONTENTS, , 1. Matrices, 1.1, , (16 Periods), , Algebra of Matrices, Inverse, 72

Page 79 :
73, , Addition, Multiplication of matrices, Null matrix and a unit matrix, Square matrix,, Symmetric, Skew symmetric, Hermitian, Skew hermition, Orthagonal, Unitary,, diagonal and Triangular matrix, Determinant of a matrix., Definition and Computation of inverse of a matrix., 1.2 Elementry Row/Column Transformation, Meaning and use in computing inverse and rank of a matrix., 1.3 Linear Dependence, Rank of a Matrix, Linear dependence/independence of vectors, Definition and computation of rank of, matrix. Computing rank through determinants, Elementary row transformation and, through the concept of a set of independent vectors, Consistency of equations., 1.4 Eigen Pairs, Cayley-Hamilton Theorem, , 2., , Definition and evaluation of eign values and eign vectors of a matrix of order two, and three, Cayley-Hamilton theorem (without Proof)and its verification, Use in, finding inverse and powers of a matrix., Differential Calculus, (15 Periods), 2.1 Function of two variables, identification of surfaces in space, conicoids, 2.2 Partial Differentiation, Directional derivative, Gradient, Use of gradient f, Partial derivatives, Chain rule,, Higher order derivatives, Euler’s theorem for homogeneous functions, Jacobians., 2.3 Vector Calculus, Vector function,Introduction todouble and triple integral,differentiation and, integration of vector functions, gradient, divergence and curl, differential, derivatives., , 3., , Differential Equation(15 Periods), 3.1 Formation, Order, Degree, Types, Solution, Formation, of differential equations through, physical,, geometrical,, mechanical and electrical considerations, Order, Degree of a differential equation,, Linear, nonlinear equation., 3.2 First Order Equations, Variable seperable, equations reducible to seperable forms, Homogeneous, equtions, equations reducible to homogeneous forms, Linear and Bernoulli form, exact equation and their solutions., 3.3 Higher Order Linear Equation :, Property of solution, Linear differential equation with constant coefficients, (PI for X= ax, Sinax, Cosax, Xn, axV, XV, 3.4 Simple Applications, LCR circuit, Motion under gravity, Newton's law of cooling,, radioactive, decay, Population growth, Force vibration of a mass point attached to spring, with and without damping, effect. Equivalence of electrical and mechanical, system, 73

Page 80 :
74, , 4., , Integral Calculus-II, 4.1, 4.2, 4.3, , 5., , (12 Periods), , Beta and Gamma Functions, Definition, Use, Relation between the two, their use in evaluating integrals., Fourier Series, Fourier series of f(x),-n<x<n, Odd and even function,Half range series., Laplace Transform, Definition, Basic theorem and properties, Unit step and Periodic, functions,inverse laplace transform, Solution of ordinary differential equations, , Probability and Statistics, , (12Periods), , 5.1, Probability, Introduction, Addition and Multiplication theorem and simple problem., 5.2, , Distribution, Discrete and continuous distribution, Bionimal Distribution, Poisson distribution,, Normal Distribution., , INSTRUCTONAL STRATEGY, The content of this course is to be taught on conceptual basis with plenty of real world, examples. The basic elements of Laplace transform, Differential equations and Applications of, differential equations can be taught with engineering applications of relevant branch., MEANS OF ASSESSMENT, Assignments and Quiz/Class Tests, Mid-term and End-term Written Tests, Model/Prototype Making, , •, •, •, , RECOMMENDED BOOKS, 1., 2., 3, 4., 5., , Elementary Engineering Mathematics by BS Grewal, Khanna Publishers, New Delhi, Engineering Mathematics, Vol I & II by SS Sastry, Prentice Hall of India Pvt. Ltd.,, Applied Mathematics-III by Chauhan and Chauhan, Krishna Publications, Meerut., Applied Mathematics-II by Kailash Sinha and Varun Kumar; Aarti Publication, Meerut., E-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., SUGGESTED DISTRIBUTION OF MARKS, Topic, Time Allotted, Marks Allotted, (Periods), (%), 1., , 16, , 24, 74

Page 81 :
75, , 2., , 15, , 20, , 3., , 15, , 20, , 4, , 12, , 18, , 5, , 12, , 18, , Total, , 70, , 100, , 75

Page 82 :
76, , 3.2, , ELECTRICAL ENGINEERING-II, , L T P, 4 - 4, RATIONALE, Electricity is said to be the life of industries. We cannot think of an industry without using, electricity. Theelectrical appliances commonly used for industrial application are, Transformers, D.C. and A.C. motors and generators. Therefore basic knowledge of these, appliances should be known to the student to facilitate him in routine working., LEARNING OUTCOMES, After undergoing this subject, the students will be able to:, •, •, •, •, •, •, , understand the concept of AC theory and phasor diagram, understand one elementary idea of 3-phase supply, demonstrate the operation of transformers, acquire the knowledge of DC machines and starters for DC machine., understand the working principle of alternators and synchronous motors., understand the working principle of single phase induction motor., DETAILED CONTENTS, , 1, , A.C.Theory, 1.1, 1.2, , 1.3, 1.4, , 1.5, 1.6, , (10 Periods), , Representation of sinusoidal quantities by phasors., Physical explanation of the phase relationship between voltage and current, when sinusoidal alternating voltage is applied across:(a) Pure resistance,, (b) Pure inductance and, (c) Pure capacitance., Explanation of inductive reactance, capacitive reactance and their significance., Relationship between voltage and current when alternating voltage is applied to, (a) Resistance and inductance in series,, (b) Resistance and capacitance in series., Power in pure resistance, inductance and capacitance; power in combination of, R-L-C circuits; power factor., Active and reactive currents and their significance; practical importance of, power factor., 76

Page 83 :
77, , 1.7, 2., , Three Phase Supply, 2.1, 2.2, 2.3, 2.4, , 3., , 3.4, , 4.2, , 4.3, 5., , 5.2, 6., , (10 Periods), , D. C. Generator:, Working principle, constructional details, e.m.f equation, types of generators, and their applications., D. C. Motor:, Working principle, back e.m.f., types of D. C. motor and elementary idea of, their characteristics, torque equation, methods of speed control (Description, only)., Starters for D.C. Machines, , Induction Motors, 5.1, , (10 Periods), , Principle of operation., E.M.F equation, Voltage & Current relations., Construction and applications of small transformers used in electronics and, communication engg., construction of auto transformers, constant voltage, transformer., Phasor diagram of a transformer on load; Definition of regulation and, efficiency; Elementary idea of losses in transformer, open circuit and short, circuit test., , D.C. Machines, 4.1, , (10 Periods), , Elementary idea about 3-phase supply., Star and delta connection. Relationship between phase and line voltage and, currents., Power and power factor in three phase system and their measurement., Comparison between three phase and single phase supply., , Transformers, 3.1, 3.2, 3.3, , 4., , Series and parallel resonance in R-L-C circuits, Q-factor of coils and capacitance., , (06 Periods), , Single Phase Induction Motor, Principle of operation and constructional details of single phase FHP, induction motors (Split phase, capacitor start capacitor run, shaded pole,, reluctance start, A.C. series, universal, hysterisis, servo and, stepper motors, their applications)., Starters for Induction motors, , Synchronous Machines, , (10 Periods), 77

Page 84 :
78, , 6.1 Alternators, Working principle, types of alternators, (brief description), 6.2 Synchronous Motors:, Working principle, construction details, vector diagram, effect of excitation on, armature current and power factor, synchronous condenser., 6.3 Application of synchronous machines., LIST OF EXPERIMENTS, 1., 2., 3., 4., 5., 6., 7., 8., , 9., , To verify that in an A.C. circuit, the phasor sum ( not the algebraic sum ) of currents at, any junction is zero., To find the voltage-current relationship in a R-L series circuit and to measure power, and power factor of the circuit., To measure power and power factor in three phase system by two wattmeter method., To determine the efficiency and regulation of a transformer by performing direct, loading., To measure the induced emf of separatly excited D.C. generator as a function of field, current., To measure the terminal voltage of a D.C. shunt generator as a function of load current., To measure the speed of a separately excited D.C. motor as a function of load torque at, rated armature voltage., To observe the difference in the starting current at switching on single phase, capacitor start induction motor with :(a) The capacitor disconnected and, (b) The capacitor connected., Also to determine how to reverse the direction of rotation., To determine V curves of a synchronous motor., , INSTRUCTIONAL STRATEGY, The teacher should lay stress on the concept of single phase and three phase supplies. The, students must be aware of transformers and DC machines, induction motor and its starters must, be learned in depth by students., MEANS OF ASSESSMENT, −, −, −, , Class test/quizzes, Home assignments, Attendance, 78

Page 85 :
79, , −, −, , Sessional Test, Practical Tasks, , 79

Page 86 :
80, , RECOMMENDED BOOKS, 1., 2., 3., 4., , A Text book of Electrical Technology by B.L. Thereja, A.K Theraja by S. Chand, Publication., Basic Electrical Engineering by V.K Mehta, Rohit Mehta, S. Chand Publication., Electrical Engineering by J. B. Gupta; S.K Kataria& Sons Publication., E-books/e-tools to be used as recommended by AICTE/NITTTR, Chandigarh., , Websites for Reference:, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., 6., Total, , Time Allotted, (Periods), 10, 10, 10, 10, 06, 10, 56, , Marks Allotted, (%), 17, 17, 17, 17, 15, 17, 100, , 80

Page 87 :
81, , 3.3 ENVIRONMENTAL STUDIES, L T P, 3 - 2, RATIONALE, A diploma holder must have knowledge of different types of pollution caused due to industries, and constructional activities so that he may help in balancing the ecosystem and controlling, pollution by various con trol measures. He should also be aware of environmental laws related to, the control of pollution. He should know how to manage the waste. Energy conservation is the, need of hour. He should know the concept of energy management and its conservation., LEARNING OUTCOMES, After undergoing the subject, the student will be able to:, • Comprehend the importance of ecosystem and sustainable, • Demonstrate interdisciplinary nature of environmental issues, • Identify different types of environmental pollution and control measures., • Take corrective measures for the abatement of pollution., • Explain environmental legislation acts., • Define energy management, energy conservation and energy efficiency, • Demonstrate positive attitude towards judicious use of energy and environmental, protection, • Practice energy efficient techniques in day-to-day life and industrial processes., • Adopt cleaner productive technologies, • Identify the role of non-conventional energy resources in environmental protection., • Analyze the impact of human activities on the environment, a., , DETAILED CONTENTS, Introduction, (04 Periods), 1.1 Basics of ecology, eco system- concept, and sustainable development, Resources, renewable and non renewable., , 2., , Air Pollution, (04 Periods), 2.1 Source of air pollution. Effect of air pollution on human health, economy, plant,, animals. Air pollution control methods., , 3., , Water Pollution, (08 Periods), 3.1 Impurities in water, Cause of water pollution, Source of water pollution. Effect of, water pollution on human health, Concept of dissolved O2, BOD, COD. Prevention, of water pollution- Water treatment processes, Sewage treatment. Water quality, standard., Soil Pollution, (06 Periods), 4.1, Sources of soil pollution, 4.2, Types of Solid waste- House hold, Hospital, From Agriculture, Biomedical, Animal, and human, excreta, sediments and E-waste, , 4., , 81

Page 88 :
82, , 4.3, 4.4, , Effect of Solid waste, Disposal of Solid Waste- Solid Waste Management, , 5., , Noise pollution, (06 Periods), Source of noise pollution, Unit of noise, Effect of noise pollution, Acceptable noise level,, Different method of minimize noise pollution., , 6., , Environmental Legislation, (08 Periods), Introduction to Water (Prevention and Control of Pollution) Act 1974, Introduction to Air, (Prevention and Control of Pollution) Act 1981 and Environmental Protection Act 1986,, Role and Function of State Pollution Control Board and National Green Tribunal (NGT),, Environmental Impact Assessment (EIA)., , 7., , Impact of Energy Usage on Environment, (06 Periods), Global Warming, Green House Effect, Depletion of Ozone Layer, Acid Rain. Ecofriendly Material, Recycling of Material, Concept of Green Buildings., , LIST OF PRACTICALS, 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., , Determination of pH of drinking water, Determination of TDS in drinking water, Determination of TSS in drinking water, Determination of hardness in drinking water, Determination of oil & grease in drinking water, Determination of alkalinity in drinking water, Determination of acidity in drinking water, Determination of organic/inorganic solid in drinking water, Determination of pH of soil, Determination of N&P (Nitrogen & Phosphorus) of soil, To measure the noise level in classroom and industry., To segregate the various types of solid waste in a locality., To study the waste management plan of different solid waste, To study the effect of melting of floating ice in water due to global warming, , INSTRUCTIONAL STRATEGY, In addition to theoretical instructions, different activities pertaining to Environmental Studies, like expert lectures, seminars, visits to green house,effluent treatment plant of any industry,rain, water harvesting plant etc. may also be organized., MEANS OF ASSESSMENT, −, Assignments and quiz/class tests,, −, Mid-term and end-term written tests, RECOMMENDED BOOKS, 1., Environmental and Pollution Awareness by Sharma BR; Satya Prakashan, New Delhi., 82

Page 89 :
83, , 2., 3., 4., 5., 6., 7., 8., , Environmental Protection Law and Policy in India by Thakur Kailash; Deep and Deep, Publications, New Delhi., Environmental Pollution by Dr. RK Khitoliya; S Chand Publishing, New Delhi, Environmental Science by Deswal and Deswal; Dhanpat Rai and Co. (P) Ltd. Delhi., Engineering Chemistry by Jain and Jain; Dhanpat Rai and Co. (P) Ltd. Delhi., Environmental Studies by ErachBharucha; University Press (India) Private Ltd.,, Hyderabad., Environmental Engineering and Management by Suresh K Dhamija; S K Katariaand Sons,, New Delhi., E-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , Websites for Reference:, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, , Topic No., 1, 2, 3, 4, 5, 6, 7, Total, 3.4, , Time Allotted, (Periods), 04, 04, 08, 06, 06, 08, 06, 42, , Marks Allotted, (%), 10, 10, 20, 14, 14, 20, 12, 100, , ELECTRONIC DEVICES AND CIRCUITS, L T P, 6 - 6, , RATIONALE, Having attained basic knowledge of electronic devices like diodes, transistors, and elementary circuits, in, second semester, this course will enable the students to learn about the use of transistors in analog, circuits like power amplifier, multistage amplifier, oscillators, wave shaping circuits and in multivibrators, etc. It also gives information about timer, operational amplifier, voltage regulator, ICs and their, applications for effective functioning in the field of electronic service industry., , LEARNING OUTCOMES, After undergoing the subject, the students will be able to:, • demonstrate the concept of single stage amplifiers and multistage amplifier., • describe the operation of large signal amplifiers., 83

Page 90 :
84, , •, •, •, •, •, •, , demonstrate the concept of negative and positive feedback., understand the operation of oscillators (Hartley, Colpitt, Wein Bridge), describe the various types of tuned voltage amplifiers, design various wave-shaping circuits, describe the concept of multi-vibrators and operational amplifiers, understand the concept of regulated DC supplies., , DETAILED CONTENTS, , 1. Single and Multistage Amplifiers, (10 Periods), -, , Introduction to h-parameter in two port network, Transistor hybrid low frequency model in CE configuration and its characteristics, Need for multistage amplifier, Gain of multistage amplifier, Different types of multistage amplifier like RC coupled, transformer coupled, direct, coupled, and their frequency response and bandwidth, , 2. Large Signal Amplifier, (10 Periods), -, , Difference between voltage and power amplifiers, Importance of impedance matching in amplifiers, Class A, Class B, Class AB, and Class C amplifiers,, Single ended power amplifiers, Graphical method of calculation (without derivation), of output power; heat dissipation curve and importance of heat sinks. Push-pull, amplifier, and complementary symmetry push-pull amplifier, , 3. Feedback Amplifiers, , (09, Periods), , -, , Basic principles and types of feedback, Derivation of expression for gain of an amplifier employing feedback, , 84

Page 91 :
85, , -, , Effect of feedback (negative) on gain, stability, distortion and bandwidth of an, amplifier, RC coupled amplifier with emitter bypass capacitor, Emitter follower amplifier and its application, , 4. Sinusoidal Oscillators, (09 Periods), -, , 5., , Use of positive feedback, Barkhausen criterion for oscillations, Different oscillator circuits-tuned collector, Hartley, Colpitts, phase shift, Wien’s, bridge, and crystal oscillator. Their working principles (no mathematical derivation, but only simple numerical problems), , Tuned Voltage Amplifiers, -, , (09 Periods), , Series and parallel resonant circuits and bandwidth of resonant circuits., Single and double tuned voltage amplifiers and their frequency response, characteristics, , 6. Clipper and Clamper Circuit, (08 Periods), -, , Introduction to Clipper, Series and shunt Clipper, positive and negative peak Clipper, Bias Clipper using, diode, Clipper using Zener diode, Introduction to Clamper, Clamper Circuit analysis, , 7. Operational Amplifiers, (10 Periods), -, , Characteristics of an ideal operational amplifier and its block diagram, IC-741 and its pin configuration, equivalent circuit of OPAMP., , 85

Page 92 :
86, , -, , Definition of differential voltage gain, CMRR, PSRR, slew rate and input offset, current, offset voltage, Bias current, Operational amplifier as an inverter, scale changer, adder, subtractor, differentiator,, and integrator, log amplifiers, anti-log amplifier, comparator, Schmitt triggers,, sample and hold circuit., , 8. Multivibrator Circuits and IC Timer, (09 Periods), 9., , Working principle of transistor as switch, Concept of multi-vibrator: astable, monostable, and bistable and their applications, Basic idea of ICs, fabrication of IC, Block diagram of IC555 and its working and applications, Monostable, Bistable and Astablemultivibrator by using IC-555, , Regulated Power Supplies, -, , Basic regulated circuit by using Zener diode, Concept of DC power supply. Line and load regulation, Concept of fixed voltage, IC regulators (like 78XX, 79XX) and variable voltage, regulator like (IC 723), , LIST OF PRACTICALS, 1., , Plot the frequency response of two stage RC coupled amplifier and calculate the bandwidth, and compare it with single stage amplifier, 2. To measure the gain of push-pull amplifier at 1KHz, 3. To measure the voltage gain of emitter follower circuit and plot its frequency response, 4. Plot the frequency response curve of Hartley and Colpitt’s Oscillator, 5. Plot the frequency response curve of phase shift and Wein bridge Oscillator, 6. Use of IC 555 as monostable multivibrator and observe the output for different values of RC, 7. Use of IC 555 as astablemultivibrator and observe the output at different duty cycles, 8. To use IC 741 (op-amplifier) as, i), Inverter,, ii) Adder,, iii) Subtractor, iv) Integrator, 9. To realize positive and negative fixed voltage DC power supply using three terminal voltage, regulator IC (7805, 7812, 7905), 10. Observation of output waveform of different type of Clipper and Clamper Circuit, , 86

Page 93 :
87, , Class Project: Fabricate any simple operational amplifier circuit (Inverter, Adder, Subtractor, etc.) and test it., , INSTRUCTIONAL STRATEGY, This subject being of fundamental importance for diploma holders in electronics engineering and related, fields, emphasis on conceptual understanding may be given by taking the help of charts. Sufficient, exercises may given to the students in single stage and multi-stage amplifier circuits in addition to, simple exercises in fabricating and testing of various simple d.c circuits. The students may be, encouraged to perform some additional practical exercises apart from the list provided., , MEANS OF ASSESSMENT, −, −, −, −, −, −, , Class Test, Home Assignment, Attendance, Quiz, Sessional Test, Practical Tasks, , RECOMMENDED BOOKS, 1., 2., 3., 4., , Basic Electronics and Linear Circuits by NN Bhargava; Tata McGraw Hill, New Delhi, Operational Amplifiers and Linear Integrated Circuits by Ramakant A. Gaykwad, Malvino A. P- Electronics principles “Tata McGraw- Hill”, Electronics Devices and Circuits by Robert L. Boylestad and L:ovis Nasherslay- Pearson, Publication, 5., E-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR,, Chandigarh., Websites for Reference:, http://swayam.gov.in, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., 6., 7., 8., , Time Allotted, (Periods), 10, 10, 09, 09, 09, 08, 09, 10, , Marks Allocation, (%), 12, 12, 11, 11, 11, 08, 11, 12, 87

Page 94 :
88, , 9., Total, , 10, 84, , 12, 100, , 3.5 ELECTRONICS WORKSHOP, L T P, - -6, PART-A ELECTRICAL WORKSHOP, , LEARNING OUTCOMES:After completing this course the learner will be able to:, • Plan and Wire a small domestic building for a given load requirement., • Specify the wiring plans of semi-industrial installations with three phase supply, and a maximum of 5 KVA load., Exercises to be Performed, 1. Identification and study of commonly used electrical materials such as, wires, cables, switches, fuses, coiling, roses, battens, cleats and allied items., 2. Identification and study of various tools used in Electrical Workshop and, safety measures., 3. Making connection of single lamp and three pin plug socket to supply using, batten wiring., 4. Making Electrical connection for staircase wiring., 5. Making of extension board with proper supply., PART-B, , ELECTRONICS WORKSHOP, , LEARNING OUTCOMES:After completion of instruction in this subject the student will:•, •, •, , Develop skill in selection and use of commonly used tools, equipment, components in a, given situation., Develop skill in wiring, soldering and desoldering works., Develop skill in tracing circuits of simple (analog and digital) electronic assembly., , Exercise to be Performed, 1., , Name and function of different tools and accessories including Tapes, Solders, Solders, tips, Fluxes; De-soldering wick, Solder cleaning fluids, Sleeves, Tags., 88

Page 95 :
89, , 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., , Demonstrate the correct use of accessories mentioned in (1) above., Given different type of power supply mention in (c), the student should be able to find, out the operating range and regulate the power supplies Equipment Type., Test waveform Generator :- Audio oscillator, Function, Generator, Signal Generator,, Spectrum Analyzer., Measurement Equipment ; Single beam CRO, Double beam/Dual trace CRO, electronic, and Digital multimeters, Transistor tester/Curve tracer, IC tester etc., Power Supply - UPS, Invertor, different types of DC/AC power supplies, Various types of Single/Multicored, Insulated screened, Power type/ Audio/ Video/, General purpose wires and cables, Exercises to be performed, Study and testing of different types of Resistor, Capacitor, Inductor, Diode, Transistor, (BJT, FET, MOS, CMOS) and ICs (All Popular Families)., Study of different processes by performing in assembling- Soldering, Desoldering,, Cutting, Stripping and connecting., Making of different types of mini electronic projects, PART-C PREPARATION OF PRINTED CIRCUIT BOARDS, , LEARNING OUTCOMES:After completion of this Course, the learners will be able to prepare printed Circuit boards., Exercise to be performed:Study of different types of PCB circuit in order to:, 1. Acquire skill in silk screen printing techniques for the purpose of making the printed, circuits boards., 2. Exposure to Non dry-method of PCB making using photoprocessing techniques., 3. Prepare, check, drill and store PCBs., , 89

Page 96 :
90, , 3.6, , DIGITAL ELECTRONICS, , L T P, 4 - 4, RATIONALE, This course has been designed to make the students know about the fundamental principles of, digital electronics and gain familiarity with the available IC chips. This subject aims to give a, background in the broad field of digital systems design and microprocessors., LEARNING OUTCOMES, After undergoing the subject, student will be able to:, • explain the importance of digitization., • verify and interpret truth tables for all logic gates., • realize all logic functions with NAND and NOR gates, • design and demonstrate adder and subtractor circuits, • verify and interpret truth tables of multiplexer, demultiplexer, encoder and decoder ICs, • design and realize different sequential circuit(Flip flops, counters and shift registers), • verify performance of different A/D and D/A converters., • explain the features and applications of different memories, DETAILED CONTENTS, 1., , Introduction, 1.1, 1.2, , 2., , 2.2, 3., , 3.2, , 4.3, 4.4, , (04 Periods), , Concept of code, weighted and non-weighted codes, examples of 8421, BCD,, excess-3 and Gray code., Concept of parity, single and double parity and error detection, , Logic Gates and Families, 4.1, 4.2, , (03 Periods), , Binary, octal and hexadecimal number system: conversion from decimal and, hexadecimal to binary and vice-versa., Binary addition and subtraction including binary points. 1’s and 2’s, complement method of addition/subtraction., , Codes and Parity, 3.1, , 4., , Distinction between analog and digital signal., Applications and advantages of digital signals., , Number System, 2.1, , (03 Periods), , (06 Periods), , Concept of negative and positive logic, Definition, symbols and truth tables of NOT, AND, OR, NAND, NOR, EXOR, Gates, NAND and NOR as universal gates., SSI, MSI, LSI, VLSI (Definition), Propagation delay, Noise Margin, Fan in, Fan out, Power dissipation., 90

Page 97 :
91, , 4.5, 4.6, 4.7, 5., , Logic Simplification, 5.1, 5.2, , 6., , Comparison between TTL, CMOS, ECL, MOS on basis of diff parameter., Introduction to Bipolar logic, MOS, ECL, TTL and CMOS logic families, Basic logic gate using NMOS, PMOS, CMOS, , Postulates of Boolean algebra, De Morgan’s Theorems. Implementation of, Boolean (logic) equation with gates, Karnaugh map (upto 4 variables) and simple application in developing, combinational logic circuits, , Arithmetic circuits, 6.1, 6.2, , (06 Periods), , (03 Periods), , Half adder and Full adder circuit, design and implementation., Half subtractor and Full subtractor or Circuit, design and implementation., , 7., , Combinational Circuit, (06 Periods), 7.1, Introduction to combinational circuit, 7.2, Multiplexer, De-multiplexer, Encoder, Decoder block diagram and Circuit., 7.3, 7 segment decoder, 7.4, BCD Encoder Circuit, , 8., , Introduction to Sequential circuit, (06 Periods), 8.1, Introduction to Sequential, 8.2, Copmparison between combinational and sequential circuit, 8.3, Concept and types of latch with their working and applications, 8.4, Operation using waveforms and truth tables of RS, T, D, Master/Slave JK flip, flops., 8.5, Difference between a latch and a flip flop, , 9., , Counters, (06 Periods), 9.1, Introduction to Asynchronous and Synchronous counters, 9.2, Binary counters, 9.3, Divide by N ripple counters, Decade counter, Ring counter and twisted Ring, counter., , 10., , Shift Register, 10.1, , 11., , (05 Periods), , Introduction and basic concepts including shift left and shift right., a) Serial in parallel out, serial in serial out, parallel in serial out, parallel in, parallel out., b) Universal shift register, , A/D and D/A Converters, (04 Periods), 11.1, Working principle of A/D and D/A converters, 11.2, Brief idea about different techniques of A/D conversion and study of :, • Simultaneous or flash type A/D converter, 91

Page 98 :
92, , 11.3, , 11.4, 12., , • Successive Approximation A/D Converter, • Single Slope A/D converter, • Dual Slope A/D converter, Brief idea of :, • Binary Weighted D/A converter, • R/2R ladder D/A converter, Applications of A/D and D/A converter., , Semiconductor Memories, , (04 periods), , Memory organization, classification of semiconductor memories (RAM, ROM, PROM,, EPROM, EEPROM), static and dynamic RAM., LIST OF PRACTICALS, 1., Verification and interpretation of truth tables for AND, OR, NOT NAND, NOR and, Exclusive OR (EXOR) and Exclusive NOR(EXNOR) gates, 2., Realisation of logic functions with the help of NAND or NOR gates, 3., - Design of a half adder using XOR and NAND gates and verification of its, operation, - Construction of a full adder circuit using XOR and NAND gates and verify its, operation, 4., Verification of truth table for positive edge triggered, negative edge triggered, level, triggered IC flip-flops (At least one IC each of D latch , D flip-flop, JK flip-flops)., 5, Verification of truth table for encoder and decoder ICs, Mux and DeMux, 6., To design a 4 bit SISO, SIPO, PISO, PIPO shift registers using JK/D flip flops and, verification of their operation., 7., To design a 4 bit ring counter and verify its operation., 8., Use of Asynchronous Counter ICs (7490 or 7493), Note: Above experiments may preferably be done on Bread Boards., INSTRUCTIONAL STRATEGY, The digital systems in microprocessors have significant importance in the area of electronics., Adequate competency needs to be developed by giving sufficient practical knowledge in, microprocessors (programming as well as interfacing), A/D, D/A Converters and other topics., Help may be taken in the form of charts, simulation packages to develop clear concepts of the, subject. Programming exercises other than the tested in circulation may be given to the students., MEANS OF ASSESSMENT, −, −, −, −, −, , Class test/quizzes, Home assignments, Attendance, Sessional Test, Practical Tasks, , 92

Page 99 :
93, , RECOMMENDED BOOKS, 1., , Digital Logic Designs by Morris Mano, Prentice Hall of India, New Delhi, , 2., , Digital Electronics by RP Jain, Tata McGraw Hill Education Pvt Ltd, New, Delhi, , 3., , Digital Electronics by BR Gupta, Dhanpat Rai & Co., New Delhi, , 4., , Digital Systems: Principles and Applications by RJ Tocci, Prentice Hall of India,, New Delhi, E-books/e-tools/relevant software to be used as recommended by, AICTE/NITTTR, Chandigarh., , 5., , Websites for Reference:, http://swayam.gov.in, , 93

Page 100 :
94, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., 6., 7., 8., 9, 10., 11., 12, Total, , Time Allotted, (Periods), 03, 03, 04, 06, 06, 03, 06, 06, 06, 05, 04, 04, 56, , Marks Allocation, (%), 07, 07, 07, 09, 11, 11, 11, 05, 11, 11, 07, 07, 100, , 94

Page 101 :
95, , 3.7 Universal Human Values, L-T-P, 2-0-1, Course Objectives, This introductory course input is intended, 1. To help the students appreciate the essential complementarily between 'VALUES' and, 'SKILLS' to ensure sustained happiness and prosperity, which are the core aspirations of, all human beings, 2. To facilitate the development of a Holistic perspective among students towards life and, profession as well as towards happiness and prosperity based on a correct understanding, of the Human reality and the rest of Existence. Such a holistic perspective forms the basis, of Universal Human Values and movement towards value-based living in a natural way, 3. To highlight plausible implications of such a Holistic understanding in terms of ethical, human conduct, trustful and mutually fulfilling human behavior and mutually enriching, interaction with Nature, Thus, this course is intended to provide a much needed orientational input in value education to, the young enquiring minds., Course Methodology, 1. The methodology of this course is explorational and thus universally adaptable. It, involves a systematic and rational study of the human being vis-à-vis the rest of, existence., 2. It is free from any dogma or value prescriptions., 3. It is a process of self-investigation and self-exploration, and not of giving sermons., Whatever is found as truth or reality is stated as a proposal and the students are facilitated, to verify it in their own right, based on their Natural Acceptance and subsequent, Experiential Validation., 4. This process of self-exploration takes the form of a dialogue between the teacher and the, students to begin with, and then to continue within the student leading to continuous selfevolution., 5. This self-exploration also enables them to critically evaluate their pre-conditionings and, present beliefs., The syllabus for the lectures is given below:, •, •, •, •, •, , After every two lectures of one hour each, there is one hour practice session., The assessment for this subject is as follows:, Sessions Marks (Internal): 20, Practical Marks (External): 30, Total Marks: 50, , UNIT 1: Course Introduction - Need, Basic Guidelines, Content and Process for Value, Education, 1., 2., 3., , Understanding the need, basic guidelines, content and process for Value Education, Self-Exploration–what is it? - its content and process; ‘Natural Acceptance’ and, Experiential Validation- as the mechanism for self-exploration, Continuous Happiness and Prosperity- A look at basic Human Aspirations, , 95

Page 102 :
96, , 4., 5., 6., , Right understanding, Relationship and Physical Facilities- the basic requirements for, fulfillment of aspirations of every human being with their correct priority, Understanding Happiness and Prosperity correctly- A critical appraisal of the current, scenario, Method to fulfill the above human aspirations: understanding and living in harmony at, various levels, , UNIT 2: Understanding Harmony in the Human Being - Harmony in Myself!, 1. Understanding human being as a co-existence of the sentient ‘I’ and the material the, Body’, 2. Understanding the needs of Self (‘I’) and ‘Body’ - Sukh and Suvidha, 3. Understanding the Body as an instrument of ‘I’ (I being the doer, seer and enjoyer), 4. Understanding the characteristics and activities of ‘I’ and harmony in ‘I’, 5. Understanding the harmony of I with the Body: Sanyam and Swasthya; correct appraisal, of Physical needs, meaning of Prosperity in detail, 6. Programs to ensure Sanyam and Swasthya, -Practice Exercises and Case Studies will be taken up in Practice Sessions., UNIT 3: Understanding Harmony in the Family and Society- Harmony in Human-Human, Relationship, 1., 2., , 3., 4., 5., 6., , Understanding Harmony in the family – the basic unit of human interaction, Understanding values in human-human relationship; meaning of Nyaya and program for its fulfillment to, ensure Ubhay-tripti;, a. Trust (Vishwas) and Respect (Samman) as the foundational values of relationship, Understanding the meaning of Vishwas; Difference between intention and competence, Understanding the meaning of Samman, Difference between respect and differentiation; the other salient, values in relationship, Understanding the harmony in the society (society being an extension of family): Samadhan, Samridhi,, Abhay, Sah-astitvaas comprehensive Human Goals, Visualizing a universal harmonious order in society- Undivided Society (AkhandSamaj), Universal Order, (SarvabhaumVyawastha )- from family to world family!, , -Practice Exercises and Case Studies will be taken up in Practice Sessions., UNIT 4: Understanding Harmony in the Nature and Existence - Whole existence as Coexistence, 1., 2., 3., 4., , Understanding the harmony in the Nature, Interconnectedness and mutual fulfillment among the four orders of nature-recyclability and self-regulation, in nature, Understanding Existence as Co-existence (Sah-astitva) of mutually interacting units in all-pervasive space, Holistic perception of harmony at all levels of existence, -Practice Exercises and Case Studies will be taken up in Practice Sessions., , UNIT 5: Implications of the above Holistic Understanding of Harmony on Professional, Ethics, 1., 2., , Natural acceptance of human values, Definitiveness of Ethical Human Conduct, , 96

Page 103 :
97, , 3., , Basis for Humanistic Education, Humanistic Constitution and Humanistic Universal Order, , 4. Competence in professional ethics:, a) Ability to utilize the professional competence for augmenting, universal human order, b) Ability to identify the scope and characteristics of people-friendly, and eco-friendly production systems,, c) Ability to identify and develop appropriate technologies and, management patterns for above production systems., 5. Case studies of typical holistic technologies, management models and production, systems, 6. Strategy for transition from the present state to Universal Human Order:, a) At the level of individual: as socially and ecologically responsible engineers, technologists, and managers, b) At the level of society: as mutually enriching institutions and organizations, 7., , To inculcate Human Values among Students:The Role of self ,Parents and Teachers, -Practice Exercises and Case Studies will be taken up in Practice Sessions., , Practical Session also Includes Different Yogic Exercises and Meditation Session, INSTRUCTONAL STRATEGY, The content of this course is to be taught on conceptual basis with plenty of real world examples., MEANS OF ASSESSMENT, −, −, −, , Assignments and quiz/class tests,, Mid-term and end-term written tests, Practical assessment, , Reference Material, The primary resource material for teaching this course consists of, a. The text book (Latest Edition), R.R Gaur, R Asthana, G P Bagaria, A foundation course in, Human Values and professional Ethics, Excel books, New, Delhi., b. The teacher’s manual (Latest Edition), R.R, Gaur, R Asthana, G P Bagaria, A foundation course in Human, Values and professional Ethics – Teachers Manual, Excel books, New, Delhi., In addition, the following reference books may be found useful for supplementary reading in, connection with different parts of the course:, 1. B L Bajpai, 2004, Indian Ethos and Modern Management, New Royal Book Co.,, Lucknow. Reprinted 2008., 2. PL Dhar, RR Gaur, 1990, Science and Humanism, Commonwealth Purblishers., 3. Sussan George, 1976, How the Other Half Dies, Penguin Press. Reprinted 1986,, 1991, 4. Ivan Illich, 1974, Energy & Equity, The Trinity Press, Worcester, and HarperCollins,, USA, 5. Donella H. Meadows, Dennis L. Meadows, Jorgen Randers, William W. Behrens III,, 97

Page 104 :
98, , 1972, limits to Growth, Club of Rome’s Report, Universe Books., 6. Subhas Palekar, 2000, How to practice Natural Farming,Pracheen(Vaidik) Krishi, Tantra Shodh, Amravati., 7. A Nagraj, 1998, Jeevan Vidya ekParichay,Divya Path Sansthan, Amarkantak., 8. E.F. Schumacher, 1973, Small is Beautiful: a study of economics as if, peoplemattered, Blond & Briggs, Britain., 9. A.N. Tripathy, 2003, Human Values, New Age International Publishers., Relevant websites, movies and documentaries, 1. Value Education websites, http://uhv.ac.in, http://www.aktu.ac.in, 2. Story of Stuff, http://www.storyofstuff.com, 3. Al Gore, An Inconvenient Truth, Paramount Classics, USA, 4. Charlie Chaplin, Modern Times, United Artists, USA, 5. IIT Delhi, Modern Technology–the Untold Story, 6. Case study Hevade Bazar Movie, 7. RC Shekhar , Ethical Contradiction ,Trident New Delhi, 8. Gandhi A., Right Here Right Now, Cyclewala Production, SUGGESTED DISTRIBUTION OF MARKS, Unit, 1, 2, 3, 4, 5, Total, , Time Allotted, (Periods), 08, 08, 08, 08, 10, 42, , Marks Allotted, (%), 20, 20, 20, 20, 20, 100, , 98

Page 105 :
99, , 4.1, , COMMUNICATION SKILLS – II, L T P, 4 - 2, , RATIONALE, Knowledge of English Language plays an important role in career development. This subject, aims at introducing basic concepts of communication besides laying emphasis on developing, listening, speaking, reading and writing skills as parts of Communication Skill., LEARNING OUTCOMES, After undergoing the subject, the students will be able to:, •, •, •, •, •, •, , Frame correct sentences with illustrations, Comprehend the language correctly, Interpret the language correctly, Use given material in new situations., Correspond effectively using various types of writings like letters, memos etc., Communicate effectively in English with appropriate body language making use of, correct and appropriate vocabulary and grammar in an organised set up and social, context., DETAILED CONTENTS, , 1. Functional Grammar, 1.1, Prepositions, , (16 periods), , 99

Page 106 :
100, , 1.2, 1.3, 1.4, , Framing Questions, Conjunctions, Tenses, , 2 Reading, 2.1, , 3, , (16 periods), Unseen Passage for Comprehension (Vocabulary enhancement - Prefixes,, Suffixes, one word substitution, Synonym and Antonym) based upon the passage, should be covered under this topic., , Writing Skill, , (24 periods), , 3.1., , Correspondence, a), Business Letters- Floating Quotations, Placing Orders, Complaint, Letters., b), Official Letters- Letters to Government and other Offices, 3.2. Memos, Circular, Office Orders, 3.3. Agenda & Minutes of Meeting, 3.4. Report Writing, , LIST OF PRACTICALS, Note: Teaching Learning Process should be focused on the use of the language in writing, reports and making presentations., Topics such as Effective listening, effective note taking, group discussions and regular, presentations by the students need to be taught in a project oriented manner where the, learning happens as a byproduct., Speaking and Listening Skills, 1. Debate, 2. Telephonic Conversation: general etiquette for making and receiving calls, 3. Offering- Responding to offers., 4. Requesting – Responding to requests, 5. Congratulating, 6. Exploring sympathy and condolences, 7. Asking Questions- Polite Responses, 8. Apologizing, forgiving, 9. Complaining, 10. Warning, 11. Asking and giving information, 12. Getting and giving permission, 13. Asking for and giving opinions, INSTRUCTIONAL STRATEGY, , 100

Page 107 :
101, , Students should be encouraged to participate in role play and other student-centered activities in, class rooms and actively participate in listening exercises, MEANS OF ASSESSMENT, -, , Assignments and quiz/class tests, mid-semester and end-semester written tests, Actual practical work, exercises and viva-voce, Presentation and viva-voce, , RECOMMENDED BOOKS, 1., , Communicating Effectively in English, Book-I by RevathiSrinivas; Abhishek, Publications, Chandigarh., 2, Communication Techniques and Skills by R. K. Chadha; Dhanpat Rai Publications, New, Delhi., 3, High School English Grammar and Composition by Wren & Martin; S. Chand &, Company Ltd., Delhi., 4., e-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR,, Chandigarh., , Websites for Reference:, http://www.mindtools.com/ page 8.html – 99k, 1., 2., http://www.letstalk.com.in, 3., http://www.englishlearning.com, 4., http://learnenglish.britishcouncil.org/en/, 5., http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, Topic No., , Time Allotted, (Periods), , Marks Allotted, (%), , 1, , 16, , 28, , 2, , 16, , 28, , 3, , 24, , 44, , Total, , 56, , 100, , 101

Page 108 :
102, , 4.2 INDUSTRIAL ELECTRONICS AND TRANSDUCERS, L T P, 4 - 4, , RATIONALE, Measurement of different parameters in required in industries to maintain the product within, specified limits. The measurement can be done by direct or indirect method. Transducers are, used as sensing elements in indirect system of measurements. The students equipped with, knowledge about thyristors will prove useful in the world of work., LEARNING OUTCOME, After undergoing the subject, the students will be able to:, •, •, •, •, •, , understand the thyristor family such as SCR, DIAC, TRIAC etc, describe the application of thyristor such as AC Phase control using SCR, understand the working principle of Induction and dielectric heating., understand basic idea and principle of transducer such as thermistor and piezoelectric, crystal, demonstrate how the weak transducer signals are processed., , DETAIL CONTENTS, 1. Thyristors families, 1.1, 1.2, , 1.3, , 2., , Name, symbol and typical applications of members of thyristor family., SCR, Triac and Diac-Basic structure, operation, V-I characteristics and ratings,, gate circuits, ratings, triggering process and triggering circuits, turn off methods, and circuits, selections of heat sinks, mounting of thyristor on heat sinks, basic, idea of protection of thyristor circuits., Operation, V-I characteristics, equivalent circuit and parameters of an UJT:, Description of UJT relaxation oscillator, use of UJT relaxation oscillator for, triggering thyristors., , Thyristor Applications, 2.1, , (14 Periods), , (14 Periods), , Single phase, various type of phase controlled rectifiers using SCR for resistive, and inductive load explanation using wave shapes and appropriate mathematical, equation (No derivation)., , 102

Page 109 :
103, , 2.2, , 2.3, 2.4, , A.C. phase control using SCRs and triacs, Application of phase controlled, rectifiers and A.C, phase control circuits in illumination control. Temperature, control, variable speed derives using D.C.. motors and small A.C. machines, Half wave,. Full wave (including bridge) using SCRs; explanation using wave, shapes and formula (no derivation), Principle of operation of basic inverter circuits, basic series and parallel, commutated inverters, principle of operation of cycloconverter, choppers and dual, converter. Basic idea of U.P.S and SMPS., , 3. Induction and Dielectric Heating, , (04 Periods), , Principles and Applications of Induction and Dielectric Heating (No Mathematical, Treatment), 4. Transducers, (16 Periods), Basic idea and principle of operation of the following types of transducers and their, applications in measuring physical parameters., 4.1, , Variable Resistance Type: Potentiometric Resistance, strain gauge, Resistance, Thermometer, Resistance Temperature detector, Thermistors., , 4.2, , Variable Capacitance Type : Variable capacitance pressure guage, Capacitor, microphone, Dilectricguage, , 4.3, , Variable Inductance Type : Differential Transformer., , 4.4, , Piezoelectric Type : Crystal Microphone, Crystal Oscillator, , 5. Processing of Transducer Signals, 5.1, , 5.2, , (08 Periods), , Characteristic of instrumentation amplifiers in respect of input impedance, output, impedance, drift, dc offset, noise, gain common mode rejection, frequency, response., Introduction to AC and DC signal conditioning (only Block diagram), , LIST OF PRACTICALS, 1. Identification of various types of packages and terminals of various low and high power, thyristors (SCR and Triac)., 2. To determine and plot firing characteristic voltage., a) By varying the anode to chathode voltage., b) By varying the gate current., 3. Observing voltage wave shapes at various points of UJT relaxation oscillator circuit., 103

Page 110 :
104, , 4. Observation of wave shapes at relevant points of the circuit of a single phase controlled, rectifier using SCR and UJT relaxation oscialltor., 5. Test of A. C. phase control circuit using triac and observe wave shapes and voltages at, relevant points in circuits (while using for lamp intensity control and/or A. C. fan speed, control)., 6. To study the working of a single phase SCR/transistor inverter circuit by observing wave, shapes at input and output., 7. To measure force and pressure by using strain guage transducer., 8. To observe the working of Piezo crystal as transducer., RECOMMENDED BOOKS, 1., 2., 3., 4., , Power Electronics by M. D. Singh and K.B Khanchandani; McGraw Hill Publication, Industrial Electronics and Control by SK. Bhattacharya, S. Chatterjee, TTTI, Chandigarh., Electrical and Electronic Measurement by A. K. Sawhney., E-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR,, Chandigarh., , INSTRUCTIONAL STRATEGY, The teacher should lay stress on the thyristor family such as SCR, DIAC and TRIAC used in, Industrial electronics. The students most learn how one form of energy has been transformed into, another form by using transducers. The teachers should also give emphasis on how weak signals, are processed using instrumentation amplifiers., MEANS OF ASSESSMENTS, − Class Test/Quizzes, − Home Assignments, − Attendance, − Sessional and end semester Examination., − Practical Tasks, , Topic No., 1., 2., 3., 4., 5., , Time Allotted, (Periods), 14, 14, 04, 16, 08, , Marks Allotted, (%), 25, 25, 06, 30, 14, 104

Page 112 :
106, , 4.3 NETWORK FILTERS AND TRANSMISSION LINES, , L, , T P, 4, , -, , 4, , RATIONALE, , The study of networks, filters and transmission lines leads to understanding of line, communication, audio and video communication, and microwave communication. Particularly, the study of networks takes off from principles of A.C. theory and introduces the student to, parameters and characteristics of various networks, including filters. Also the study of, transmission lines becomes important as its analogy is used in study of transmission of plane, electromagnetic waves in bounded media., LEARNING OUTCOMES, After completion of the course, the students will be able to:, •, •, •, •, , describe the concept of symmetrical, asymmetrical, balanced, unbalanced, T, PI, ladder,, lattice, L and Bridge T networks, demonstrate the operation of attenuators and filters., understand the concept and applications of transmission lines., measure standing wave ratio and characteristic impedance of the line, , DETAILED CONTENTS, 1., , Networks, , (16 Periods), , -, , Two port (four terminals) network: Basic concepts of the following terms:, - Symmetrical and asymmetrical networks: Balanced and unbalanced network; Tnetwork, π network, Ladder network; Lattice network; L-network and Bridge Tnetwork, , -, , Symmetrical Network:, - Concept and significance of the terms characteristic impedance, propagation, constant, attenuation constant, phase shift constant and insertion loss., - T-network andπ Network (No Derivation), , -, , Asymmetrical Network, - Concept and significance of iterative impedance, image impedance,, , 106

Page 113 :
107, , -, , 2., , 3., , The half section (L-section); symmetrical T and π sections into half sections (No, Derivation), Attenuators, (10 Periods), - Units of attenuation (Decibels and Nepers): General characteristics of attenuators, - Analysis and design of simple attenuator of following types; Symmetrical T and π, type, L type., Filters, , (16 Periods), , -, , Brief idea of the use of filter networks in different communication systems, concept, of low pass, high pass, band pass and band stop filters., , -, , Prototype Filter Section:, - Impedance characteristics vs frequency characteristics of a low and high pass, filter and their significance, -, , Simple design problems of prototype low pass section., , -, , 4., , M-Derived Filter Sections, Limitation of prototype filters, need of m-derived filters, - Crystal Filters, Crystal and its equivalent circuits, special properties of piezoelectric filters and their, use, - Active Filters, Basic concept of active filters and their comparison with passive filters., Transmission Lines, (14 Periods), -, , Transmission Lines, their types and applications., Distributed constants, T and π representation of transmission line section., Concept of infinite line, Condition for minimum distortion and minimum attenuation of signal on-the-line and, introduction to loading methods., Concept of reflection and standing waves, definition of reflection coefficient, SWR, &VSWR and their relation (no derivation)., Concept of transmission lines at high frequencies., Introduction to stubs. (single, open and short stubs)., HVDC (High Voltage DC transmission) – Concept and Advantage, Disadvantage, and areas of application., , 107

Page 114 :
108, , LIST OF PRACTICALS, 1. To measure the characteristic impedance of symmetrical T and π networks, 2. To measure the image impedance of a given asymmetrical T and π networks, 3. For a prototype low pass filter:, a) Determine the characteristic impedance experimentally, b) Plot the attenuation characteristic, 4. To design and measure the attenuation of a symmetrical T/ π type attenuator, 5. For a prototype high pass filter:, -, , Determine the characteristic impedance experimentally, To plot the attenuation characteristic, , 6. a) To plot the Impedance characteristic of a prototype band-pass filter, b) To plot the attenuation characteristic of a prototype band pass filter, 7. a) To plot the impedance characteristic of m- derived low pass filter, b) To plot the attenuation characteristics of m-derived high pass filter, 8. To observe the information of standing waves on a transmission line and measurement of, SWR and characteristic impedance of the line, 9. Draw the attenuation characteristics of a crystal filter, , INSTRUCTIONAL STRATEGY, Stress should be laid on problems in networks/ filler and transmission lines. Practical must be, carried out after completion of topic to gain a good know how on the subject students should be, given home assignments on various topics, stress on making own circuit models to calculate, input/output impedance, characteristic impedance, losses etc. should be carried out by the, students., MEANS OF ASSESSMENT, −, −, −, −, , Class test/quizzes, Home assignments, Attendance, Sessional Test, 108

Page 115 :
109, , −, , Practical Tasks, , RECOMMENDED BOOKS, , 1. Network Filters and Transmission Lines by AK Chakarvorty; Dhanpat Rai and Co., Publication, New Delhi, 2. Network Analysis by Soni and Gupta; Dhanpat Rai and Co. Publication, New Delhi, 3. Network Filters and Transmission Line by Yash Pal; Ishan Publications, Ambala City, 4. Electrical and Electronics Measuring instrumentation, A.K Sawhney; Dhanpat Rai and Co., Publication, New Delhi, 5. E-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR,, Chandigarh., Websites for Reference:, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS:, Topic No., 1, 2, 3, 4, , Time Allotted, (Periods), 16, 10, 16, 14, 56, , Marks Allocation, (%), 29, 18, 29, 24, 100, , Total, , 109

Page 116 :
110, , 4.4, , ELECTRONIC INSTRUMENTS AND MEASUREMENT, L T P, 4 - 4, , RATIONALE, In the real world of work, the technician is required to handle wide variety of instruments while, testing, trouble shooting, calibration etc. The study of this subject will help students to gain the, knowledge of working principles and operation of different instruments. During practical, sessions, he will acquire the requisite skills., LEARNING OUTCOMES, After undergoing the subject, students will be able to:, •, •, •, •, •, •, , describe the specifications of measuring instruments., demonstrate the working principle voltage, current and resistance measurement along, with their applications., understand the working of various parts of CRT., measure frequency, voltage, time period and phase using CRO and DSO, demonstrate the working of RF signal generator, pulse generator and analysers, understand the working principle of DC/AC bridges and meters., , DETAILED CONTENTS, , 1. Basics of Measurements, (10 Periods), -, , Measurement, method of measurement, types of instruments, , -, , Specifications of instruments: Accuracy, precision, sensitivity, resolution, range, errors in, measurement, sources of errors, limiting errors, loading effect, importance and applications, of standards and calibration, , 2. Voltage,, Measurement, -, , Current, and, (08 Periods), , Resistance, , Principles of measurement of DC voltage, DC current, AC voltage, AC current,, Principles of operation and construction of permanent magnet moving coil, (PMMC) instruments and Moving iron type instruments,, , 110

Page 117 :
111, , 3. Cathode Ray Oscilloscope, (12 Periods), 4, , Impedance Bridge Q Meters, -, , 5, , Construction and working of Cathode Ray Tube(CRT), Block diagram description of a basic CRO and triggered sweep oscilloscope, front, panel controls, Specifications of CRO and their explanation, Measurement of current, voltage, frequency, time period and phase using CRO, Digital storage oscilloscope (DSO) : block diagram and working principle, Working Principle of spectrum analyser, , Wheat stone bridge, AC bridges: Maxwell’s induction bridge, Hay’s bridge, De-Sauty’s bridge,, Schering bridge and Anderson bridge, Bock diagram description of laboratory type RLC bridge, specifications of RLC, bridge., Block diagram and working principle of Q meter., , Signal, , Instruments, -, , (08 periods), , Generators, , and, , Analytical, , (08 Periods), , Explanation of block diagram specifications of low frequency and RF generators,, pulse generator, function generator, Distortion factor meter, Instrumentation amplifier: its characteristics, need and working, , 6. Digital Instruments, (10 Periods), -, , Comparison of analog and digital instruments, Working principle of ramp, dual slope and integration type digital voltmeter, Block diagram and working of a digital multi-meter, Specifications of digital multi-meter and their applications, Limitations of digital multi-meters., , 111

Page 118 :
112, , -, , Working principle of logic probe, logic pulser, logic analyzer and signature, analyzer., , LIST OF PRACTICALS, 1, , Measurement, , of, , voltage,, , resistance,, , frequency using digital multimeter, 2, 3, 4, 5, 6, 7, 8, , Measurement of voltage, frequency, time period and phase using CRO, Measurement of voltage, frequency, time and phase using DSO, Measurement of Q of a coil, Measurement of resistance and inductance of coil using RLC Bridge, Measurement of impedance using Maxwell Induction Bridge, To find the value of unknown resistance using Wheat Stone Bridge, Measurement of distortion using Distortion Factor Meter, , 112

Page 119 :
113, , INSTRUCTIONAL STRATEGY, The subject requires both theory and practical emphasis simultaneously, so that the student can, understand the practical significance of the various areas. Visits to instrumentation and, communications industries must be carried out, so as to make the students can understand where, and how the various instruments are used in the industry., MEANS OF ASSESSMENT, − Assignments and quiz/class tests, − Mid-term and end-term written tests, − Model/prototype making, − Actual laboratory and practical work, − Model/prototype making, − Assembly and disassembly exercises, − Viva-Voce, RECOMMENDED BOOKS, 1., , Electronics Measurement and Instrumentation by AK Sawhney, Dhanpat Rai and Sons, New Delhi, , 2., 3., 4., , Electronics Instrumentation by Cooper, Prentice Hall of India, New Delhi, Electronics Instrumentation by JB Gupta, Satya Prakashan, New Delhi, E-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR,, Chandigarh., , Websites for Reference:, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, Topic No, Time Allotted, Marks Allocation, (Periods), (%), 1., 10, 18, 2., 08, 14, 3., 12, 22, 4., 08, 14, 5., 08, 14, 6., 10, 18, Total, 56, 100, , 113

Page 120 :
114, , 4.5, , PRINCIPLES OF COMMUNICATION ENGINEERING, L T P, 4 - 4, , RATIONALE, The study of principles of communication systems leads to further specialized study of audio and video, systems, line communications and microwave communication systems. Thus the diploma-holder in, Electronics and Communication Engineering shall find employment in areas of R and D, production,, servicing and maintenance of various communication systems. The students should understand the, advantage and limitations of various analog and digital modulation systems on a comparative a scale, and relate to them while studying practical communication systems., , LEARNING OUTCOMES, After undergoing the subject, students will be able to:, •, •, •, •, •, •, , Explain the concept and need of modulation and demodulation, Measure the modulation index of the Amplitude Modulated wave and frequency, deviation of FM., Use different types of modulators and demodulators., Obtain modulating signal from an AM Detector Circuit and FM detector, Use different types of Pulse Modulation Techniques (PAM, PPM, PWM and PCM), Classify different radio transmitters and radio receivers., , DETAILED CONTENTS, , 1., , Introduction, 1.1, 1.2, , 2., , Need for modulation, modulation and demodulation in communication systems, Basic scheme of a communication system., , Amplitude modulation, 2.1, , (04 Periods), , (06 Periods), , Derivation of expression for an amplitude modulated wave. Carrier and side band, components. Modulation index. Spectrum and BW of AM Wave. Relative power, distribution in carrier and side bands., , 114

Page 121 :
115, , 2.2, , 3., , 4., , Elementary idea of DSB-SC, SSB-SC, SSB and VSB modulations, their comparison, and areas, of applications, , Frequency modulation, , (05 Periods), , 3.1, , Expression for frequency modulated wave and its frequency spectrum (without Proof and, analysis of Bassel function) Modulation index, maximum frequency deviation and deviation, ratio, BW of FM signals, Carson’s rule., , 3.2, , Effect of noise on FM carrier. Noise triangle, Role of limiter, Need for pre-emphasis and deemphasis, capture effect., , 3.3, , Comparison of FM and AM in communication systems, , Phase modulation, , (04 Periods), , 4.1 Derivation of expression for phase modulated wave, modulation index, comparison with, frequency modulation., , 5., , Principles of AM Modulators, Circuit Diagram and working operation of:, a), b), c), , 6., , Collector and Base Modulator, Square Low Modulator, Balanced Modulator, , Principles of FM Modulators, , 6.1, 6.2, 7., , (04 Periods), , Working principles and applications of reactance modulator, varactor diode modulator,, VCO and Armstrong phase modulator., Stabilization of carrier using AFC (Block diagram approach)., , Demodulation of AM Waves, , 7.1, , (04 Periods), , (04 Periods), , Principles of demodulation of AM wave using diode detector circuit, , 115

Page 122 :
116, , 8., , Demodulation of FM Waves, , 8.1, 8.2, , (05 Periods), , Basic principles of FM detection using slope detector, Principle of working of the following FM demodulators, i., Foster-Seeley discriminator, ii., Ratio detector, iii., Block diagram of Phase locked Loop (PLL) FM demodulators (No Derivation), , 116

Page 123 :
117, , 9., , Pulse Modulation, 9.1, 9.2, , 10., , 11., , (05 Periods), , Basic concept of sampling theorem, quantization, coding and Shanon’s theorem., Types of PCM system and its application(Basic idea only), Digital modulation techniques., (ASK, FSK,PSK, DPSK (Brief idea only), , Radio Transmitter, 11.1, 11.2, 11.3, , 12., , Basic concepts of time division multiplexing (TDM) and frequency division multiplexing, (FDM), Pulse Amplitude Modulation (PAM), Pulse Position Modulation (PPM), Pulse Width, Modulation (PWM)., , Pulse Code Modulation, 10.1, 10.2, 10.3, , (05 Periods), , Classification of transmitters on the basis of power, frequency and modulation., Block diagram of an AM transmitters and working of each stage. Low level and High level, modulation., Block diagram and working principle of reactance tube and Armstrong FM transmitters, , Radio Receiver., 12.1, 12.2, 12.3, , (05 Periods), , (05 Periods), , Brief description of crystal and TRF radio receivers; Need for and principles of super, heterodyne radio receiver., Block diagram of super- heterodyne AM receiver, function of each block and typical, waveforms at the input and output of each block., Block diagram of an FM receiver, function of each block and wave/forms at input and, output at different blocks., , LIST OF PRACTICALS, , 1., , 2., , a), b), , To observe an AM wave on CRO produced by a standard signal generator using internal, and external modulation, To measure the modulation index of the wave obtained in above practical, , a), , To obtain an AM wave from a square law modulator circuit and observe waveforms, , b), , To measure the modulation index of the obtained wave form., , 117

Page 124 :
118, , 3., , To obtain an FM wave and measure the frequency deviation for different modulating signals., , 4., 5., , To obtain modulating signal from FM detector., To observe the sampled signal and compare it with the analog input signal. Note the effect of, varying the sampling pulse width and frequency on the sampled output., To observe and note the pulse amplitude modulated signal (PAM) and compare them with the, corresponding analog input signal, To observe PPM and PWM signal and compare it with the analog input signal, To observe wave form of different modulation Technique (ASK, FSK, DPSK), , 6., 7., 8., , INSTRUCTIONAL STRATEGY, The subject requires both theory and practical emphasis simultaneously, so that the student can, understand the practical significance of the various areas. Visits to instrumentation and, communications industries must be carried out, so as to make the students can understand where, and how the various instruments are used in the industry., MEANS OF ASSESSMEN T, −, −, −, −, −, , Class test/quizzes, Home assignments, Attendance, Sessional Test, Practical Tasks, , RECOMMENDED BOOKS, 1., 2., 3., 4., , An Introduction to Analog and Digital Communication by Simon Haykin, Wiley Student, Edition., Electronics Communication System by Kennedy, Tata McGraw Hill Education Pvt Ltd,, New Delhi, Principle of communication Engineering by Taub, TMH Publication., E-books/e-tools to be used as recommended by AICTE/NITTTR, Chandigarh., , Websites for Reference:, http://swayam.gov.in, , 118

Page 125 :
119, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., Total, , Time Allotted, (Periods), 04, 06, 05, 04, 04, 04, 04, 05, 05, 05, 05, 05, 56, , Marks Allocation, (%), 07, 11, 09, 07, 07, 07, 07, 09, 09, 09, 09, 09, 100, , 119

Page 126 :
120, , 4.6 ENERGY CONSERVATION, L T P, 3 - 2, RATIONALE, The requirement of energy has increased manifolds in last two decades due to rapid urbanization, and growth in industrial/service sector. It has become challenging task to meet ever increasing, energy demands with limited conventional fuels and natural resources. Due to fast depletion of, fossil fuels and a tremendous gap between supply and demand of energy, it is essential to adopt, energy conservation techniques in almost every field like industries, commercial and residential, sectors etc. Energy conservation has attained priority as it is regarded as additional energy, resource. Energy saved is energy produced. This course covers the concepts of energy, management and its conservation. It gives the insight to energy conservation opportunities in, general industry and details out energy audit methodology and energy audit instruments., LEARNING OUTCOMES, After undergoing this subject, the students will be able to:, •, •, •, •, •, •, , 1., , 2., , define principles and objectives of energy management and energy audit., understand Energy Conservation Act 2001 and its features., understand various forms & elements of energy., identify electrical and thermal utilities. Understand their basic principle of operation and, assess performance of various equipments., identify areas of energy conservation and adopt conservation methods in various systems., evaluate the techno economic feasibility of the energy conservation technique adopted., DETAILED CONTENTS, Basics of Energy, 1.1 Classification of energy- primary and secondary energy, commercial and noncommercial energy, non-renewable and renewable energy with special reference to, solar energy, Capacity factor of solar and wind power generators., 1.2 Global fuel reserve, 1.3 Energy scenario in India and state of U.P. Sector-wise energy consumption, (domestic, industrial, agricultural and other sectors), 1.4 Impact of energy usage on climate, , Energy Conservation and EC Act 2001, 2.1 Introduction to energy management, energy conservation, energy efficiency and its, need, , 120

Page 127 :
121, , 2.2, , Salient features of Energy Conservation Act 2001 & The Energy Conservation, (Amendment) Act, 2010 and its importance. Prominent organizations at centre and, state level responsible for its implementation., 2.3 Standards and Labeling: Concept of star rating and its importance, Types of product, available for star rating, , 3., , Electrical Supply System and Motors, 3.1, 3.2, 3.3, 3.4, , Types of electrical supply system, Single line diagram, Losses in electrical power distribution system, Understanding Electricity Bill: Transformers Tariff structure, Components of power, (kW, kVA and kVAR) and power factor, improvement of power factor, Concept of, sanctioned load, maximum demand, contract demand and monthly minimum charges, (MMC), 3.5 Transformers: Introduction, Losses in transformer, transformer Loading, Tips for, energy savings in transformers, 3.6, , 4., , 5., , Electric Motors, Types of motors, Losses in induction motors Features and characteristics of energy, efficient motors, Estimation of motor loading, Variation in efficiency and power, factor with loading, Tips for energy savings in motors, Energy Efficiency in Electrical Utilities, 4.1, Pumps: Introduction to pump and its applications, Efficient pumping system, operation, Energy efficiency in agriculture pumps, Tips for energy saving in, pumps, 4.2, Compressed Air System: Types of air compressor and its applications, Leakage, test, Energy saving opportunities in compressors., 4.3, Energy Conservation in HVAC and Refrigeration System: Introduction, Concept, of Energy Efficiency Ratio (EER), Energy saving opportunities in Heating,, Ventilation and Air Conditioning (HVAC) and Refrigeration Systems., , Lighting and DG Systems, 5.1, , 6., , Lighting Systems: Basic definitions- Lux, lumen and efficacy, Types of different, lamps and their features, Energy efficient practices in lighting, 5.2 DG Systems: Introduction, Energy efficiency opportunities in DG systems, Loading, estimation, Energy Efficiency in Thermal Utilities, 6.1, , Thermal Basics: Thermal energy, Energy content in fuels, Energy Units and its, conversions in terms of Metric Tonne of Oil Equivalent (MTOE), 121

Page 128 :
122, , 6.2, , 7., , Energy Conservation in boilers and furnaces : Introduction and types of boilers,, Energy performance assessment of boilers, Concept of stoichiometric air and excess, air for combustion, Energy conservation in boilers and furnaces, Do’s and Don’ts for, efficient use of boilers and furnaces, 6.3 Cooling Towers: Basic concept of cooling towers, Tips for energy savings in cooling, towers, 6.4 Efficient Steam Utilization, Energy Conservation Building Code (ECBC), 7.1 ECBC and its salient features, 7.2 Tips for energy savings in buildings: New Buildings, Existing Buildings, , 8., , Waste Heat Recovery and Co-Generation, 8.1 Concept, classification and benefits of waste heat recovery, 8.2 Concept and types of co-generation system, , 9., , General Energy Saving Tips, Energy saving tips in:, 9.1, 9.2, 9.3, 9.4, 9.5, 9.6, 9.7, 9.8, 9.9, 9.10, , 10., , Lighting, Room Air Conditioner, Refrigerator, Water Heater, Computer, Fan, Heater, Blower and Washing Machine, Colour Television, Water Pump, Cooking, Transport, , Energy Audit, 10.1 Types and methodology, 10.2 Energy audit instruments, 10.3 Energy auditing reporting format, , PRACTICAL EXERCISES, 1., 2., , To conduct load survey and power consumption calculations of small building., To check efficacy of different lamps by measuring power consumption and lumens using, lux meter., 122

Page 129 :
123, , 3., 4., 5., 6., , To measure energy efficiency ratio (EER) of an air conditioner., To measure effect of valve throttling and variable frequency drive (VFD ) on energy, consumption by centrifugal pump., To measure and calculate energy saving by arresting air leakages in compressor., To measure the effect of blower speed on energy consumed by it., , STUDENT ACTIVITIES ON ENERGY CONSERVATION/ENERGY EFFICIENCY, −, −, −, −, −, , Presentations of Case Studies, Debate competitions, Poster competitions, Industrial visits, Visual Aids, , INSTRUCTIONAL STRATEGY, Teachers are expected to lay considerable stress on understanding the basic concepts in energy, conservation, principles and their applications. For this purpose, teachers are expected to give, simple problems in the class room so as to develop necessary knowledge for comprehending the, basic concepts and principles. As far as possible, the teaching of the subject must be, supplemented by demonstrations and practical work in the laboratory. Visits to industries must, be carried out. Expert from industry must be invited to deliver talks on energy conservation to, students and faculty., RECOMMENDED BOOKS, 1., Guide book on General Aspects of Energy Management and Energy Audit by Bureau of, Energy Efficiency, Government of India. Edition 2015, 2., Guide book on Energy Efficiency in Electrical Utilities, by Bureau of Energy Efficiency,, Government of India. Edition 2015, 3., Guide book on Energy Efficiency in Thermal Utilities, by Bureau of Energy Efficiency,, Government of India. Edition 2015, 4., Handbook on Energy Audit & Environmental Management by Y P Abbi & Shashank, Jain published by TERI. Latest Edition, Important Links:, (i) Bureau of Energy Efficiency (BEE), Ministry of Power, Government of India., www.beeindia.gov.in., (ii) Ministry of New and Renewable Energy (MNRE), Government of India., www.mnre.gov.in., , 123

Page 130 :
124, , (iii)Uttar Pradesh New and Renewable Energy Agency (UPNEDA), Government of Uttar, Pradesh. www.upneda.org.in., (iv) Central Pollution Control Board (CPCB), Ministry of Environment, Forest and, Climate Change, Government of India. www.cpcb.nic.in., (v) Energy Efficiency Sevices Limited (EESL). www.eeslindia.org., (vi) Electrical India, Magazine on power and electrical products industry., www.electricalindia.in., , INDUSTRIAL TRAINING OF STUDENTS, It is needless to emphasize further the importance of Industrial Training of students during their, 3 years of studies at Polytechnics. It is industrial training, which provides an opportunity to, students to experience the environment and culture of industrial production units and, commercial activities undertaken in field organizations. It prepares student for their future role, as diploma engineers in the world of work and enables them to integrate theory with practice., Polytechnics have been arranging industrial training of students of various durations to meet the, above objectives., , This document includes guided and supervised industrial training of 4 weeks duration to, be organised during the semester break starting after second year i.e. after 4th semester, examinations. The concerned HODs along with other teachers will guide and help, students in arranging appropriate training places relevant to their specific branch. It is, suggested that a training schedule may be drawn for each student before starting of the, training in consultation with the training providers. Students should also be briefed in, advance about the organizational setup, product range, manufacturing process, important, machines and materials used in the training organization., Equally important with the guidance is supervision of students training in the, industry/organization by the teachers. Students should be encouraged to write daily, report in their diary to enable them to write final report and its presentation later on., An external assessment of 50 marks has been provided in the study and evaluation, scheme of 5th Semester. Evaluation of professional industrial training report through, viva-voce/presentation aims at assessing students understanding of materials, industrial, process, practices in industry/field organization and their ability to engage in activities, , 124

Page 131 :
125, , related to problem solving in industrial setup as well as understanding of application of, knowledge and skills learnt in real life situations., Teachers and students are requested to see the footnote below the study and evaluation, scheme of 4 th semester for further details., The teacher along with field supervisors will conduct performance assessment of, students. The components of evaluation will include the following:, a), b), c), d), , Punctuality and regularity, Initiative in learning new things, Presentation and VIVA, Industrial training report, , 15%, 15%, 15%, 55%, , 5.1, , INDUSTRIAL MANAGEMENT AND ENTREPRENEURSHIP DEVELOPMENT, L T P, 5, RATIONALE, In the present day scenario, it has become imperative to impart entrepreneurship and, management concepts to students so that a significant percentage of them can be directed, towards setting up and managing their own small enterprises. It may be further added that an, entrepreneurial mindset with managerial skills helps the student in the job market. This subject, focuses on imparting the necessary competencies and skills of enterprise set up and its, management., LEARNING OUTCOMES, After undergoing this course, the students will be able to :, •, •, •, •, •, •, •, •, •, •, •, , Know about various schemes of assistance by entrepreneurial support agencies, Conduct market survey, Prepare project report, Explain the principles of management including its functions in an organisation., Have insight into different types of organizations and their structures., Inculcate leadership qualities to motivate self and others., Manage human resources at the shop-floor, Maintain and be a part of healthy work culture in an organisation., Use marketing skills for the benefit of the organization., Maintain books of accounts and take financial decisions., Undertake store management., 125

Page 132 :
126, , •, , Use modern concepts like TQM, JIT and CRM., DETAILED CONTENTS, SECTION – A, , ENTREPRENEURSHIP, 1., , Introduction, 1.1, 1.2, , (04 Periods), , Concept /Meaning and its need, Qualities and functions of entrepreneur and barriers in entrepreneurship, , 1.3, 1.4, , 2., , Sole proprietorship and partnership forms and other forms of business organisations, Schemes of assistance by entrepreneurial support agencies at National, State,, District –level, organisation: NSIC, NRDC, DC, MSME, SIDBI, NABARD,, NIESBUD, HARDICON Ltd., Commercial Banks, SFC’s TCO, KVIB, DIC,, Technology Business Incubators (TBI) and Science and Technology Entrepreneur, Parks, Market Survey and Opportunity Identification/Ideation, (04 Periods), 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, , 3., , Scanning of the business environment, Salient features of National and Haryana State industrial policies and resultant, business opportunities, Types and conduct of market survey, Assessment of demand and supply in potential areas of growth, Identifying business opportunity, Considerations in product selection, Converting an idea into a business opportunity, , Project report Preparation, 3.1, 3.2, 3.3, 3.4, 3.5, , (06 Periods), , Preliminary project report, Detailed project report including technical, economic and market feasibility, Common errors in project report preparations, Exercises on preparation of project report, Sample project report, SECTION –B, 126

Page 133 :
127, , MANAGEMENT, 4., , Introduction to Management, 4.1, 4.2, 4.3, 4.4, 4.5, 4.6, 4.7, 4.8, , 5., , 5.2, , 6., , 6.2, , (08 Periods), , Leadership: Definition and Need, Qualities and functions of a leader, Manager Vs, leader, Types of leadership, Case studies of great leaders, Motivation: Definition and characteristics, Importance of self motivation, Factors, affecting motivation, Theories of motivation (Maslow, Herzberg, Douglas,, McGregor), , Management Scope in Different Areas, 6.1, , 7., , Definitions and importance of management, Functions of management: Importance and process of planning, organising, staffing,, directing and controlling, Principles of management (Henri Fayol, F.W. Taylor), Concept and structure of an organisation, Types of industrial organisations and their advantages, Line organisation, staff organisation, Line and staff organisation, Functional Organisation, , Leadership and Motivation, 5.1, , (06 Periods), , (14 Periods), , Human Resource Management: Introduction and objective, Introduction to Man, power planning, recruitment and selection, Introduction to performance appraisal, methods, Material and Store Management: Introduction functions, and objectives, ABC, Analysis and EOQ, , 6.3, , Marketing and sales: Introduction, importance, and its functions, Physical, distribution, Introduction to promotion mix, Sales promotion, , 6.4, , Financial Management: Introductions, importance and its functions, knowledge of, income tax, sales tax, excise duty, custom duty, VAT, GST, , Work Culture, , (08 Periods), , 127

Page 134 :
128, , 8., , 7.1, 7.2, , Introduction and importance of Healthy Work Culture in organization, Components of Culture, , 7.3, , Importance of attitude, values and behavior, , 7.4, , Behavioural Science – Individual and group behavior., , 7.5, , Professional ethics – Concept and need of Professional Ethics and human values., , Basic of Accounting and Finance, , 9., , (10 Periods), , 8.1, , Basic of Accounting:Meaning and definition of accounting, Double entry system of book keeping,, Trading account, PLA account and balance sheet of a company, , 8.2, , Objectives of Financial Management: Profit Maximization v/s Wealth Maximization, , Miscellaneous Topics, , (10 Periods), , 9.1, , Total Quality Management (TQM): Statistical process control, Total employees, Involvement, Just in time (JIT), 9.2 Intellectual Property Right (IPR) : Introduction, definition and its importance,, Infringement related to patents, copy right, trade mark, INSTRUCTIONAL STRATEGY, Some of the topics may be taught using question/answer, assignment, seminar or case study, method. The teacher will discuss stories and case studies with students, which in turn will, develop appropriate managerial and entrepreneurial qualities in the students. In addition, expert, lecturers may also be arranged from outside experts and students may be taken to nearby, industrial organisations on visit. Approach extracted reading and handouts may be provided., , MEANS OF ASSESSMENT, •, •, •, , Assignments and quiz/class tests, Mid-term and end-term written tests, Model/Prototype making., , RECOMMENDED BOOKS, 1. A Handbook of Entrepreneurship, Edited by BS Rathore and Dr JS Saini; Aapga, Publications, Panchkula (Haryana), 128

Page 135 :
129, , 2. Entrepreneurship Development and Management by J.S.Narang; Dhanpat Rai & Sons,, Delhi., 3. Entrepreneurship Development by CB Gupta and P Srinivasan, Sultan Chand and Sons,, New Delhi, 4. Handbook of Small Scale Industry by PM Bhandari, 5. Entrepreneurship Development and Management by MK Garg, 6. E-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., Websites for Reference:, http://swayam.gov.in, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, 6, 7, 8, 9, Total, , Time Allotted, (Periods), 04, 04, 06, 06, 08, 14, 08, 10, 10, 70, , Marks Allotted (%), 06, 06, 08, 08, 12, 20, 12, 14, 14, 100, , 129

Page 136 :
130, , 5.2, , MICROPROCESSORS AND PERIPHERAL DEVICES, L T P, 4 - 4, , RATIONALE, The study of microprocessors in terms of architecture, software and interfacing techniques leads, to the understanding of working of CPU in a microcomputer. The development in, microprocessors of 32 bit architecture brings the students face-to-face with mainframe enabling, them to get employment in R&D, assembly, repair and maintenance of hardware of, microprocessors and computers. Microprocessors find application in process control industry., They also form a part of the electronic switching system between source and destination in long, distance telecommunications. Thus the microprocessor is an area of specialization. Students of, electronics and related engineering branches often use microprocessors to introduce, programmable control in their projects, in industrial training., LEARNING OUTCOMES, After undergoing the subject, the students will be able to:, •, •, •, •, •, •, •, , understand the concept of microcomputer system, describe Architecture and pin details of 8085, write assembly language program using mnemonics, interface various peripheral devices with microprocessor., use various data transfer techniques, describe architecture and pin detail of 8086, describe the idea of advance microprocessors like Pentium series and dual core., , DETAILED CONTENTS, 1., , Evolution of Microprocessor, , (05 Periods), , Typical organization of a microcomputer system and functions of its various blocks., Microprocessor, its evolution, function and impact on modern society, 2., , Architecture of a Microprocessor, (05 periods), (With reference to 8085 microprocessor), Concept of Bus, bus organization of 8085, Functional block diagram of 8085 and, function of each block, Pin details of 8085 and related signals, Demultiplexing of, , 130

Page 137 :
131, , address/data bus generation of read/write control signals, Steps to execute a stored, programme, , 131

Page 138 :
132, , 3., , Instruction Timing and Cycles, , (05 periods), , Instruction cycle, machine cycle and T-states, Fetch and execute cycle, Timing cycle, diagram., 4., , Programming (with respect to 8085 microprocessor), , (09 periods), , Brief idea of machine and assembly languages, Machines and Mnemonic codes., Instruction format and Addressing mode. Identification of instructions as to which, addressing mode they belong. Concept of Instruction set. Explanation of the, instructions of the following groups of instruction set. Data transfer group,, Arithmetic Group, Logic Group, Stack, I/O and Machine Control Group. Programming, exercises in assembly language. (Examples can be taken from the list of experiments)., 5., , Memories and I/O interfacing, , (06 periods), , Concept of memory mapping, partitioning of total memory space. Address decoding,, concept of peripheral mapped I/O and memory mapped I/O. Interfacing of memory, mapped I/O devices., 6., , Interrupts, , (06 periods), , Concept of interrupt, Maskable and non-maskable, Edge triggered and level triggered, interrupts, Software interrupt, Restart interrupts and its use, Various hardware interrupts, of 8085, Servicing interrupts, extending interrupt system, 7., , Data Transfer Techniques, , (06 periods), , Concept of programmed I/O operations, sync data transfer, async data transfer (hand, shaking), Interrupt driven data transfer, DMA, Serial output data, Serial input data, 8., , Peripheral devices, , (06 periods), , 8255 PPI, 8253 PIT and 8257 DMA controller, 9., , Architecture of 8086 Microprocessor, - Block diagram, - Minimum and Maximum mode, - Pin and Signals, - Addressing Modes, Advance Microprocessors, , 10., -, , (06 periods), , (02 periods), , Introduction to Pentium series processors and core 2 duo, dual core (core i3,, i5, i7), 132

Page 139 :
133, , LIST OF PRACTICALS, 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., , Familiarization of different keys of 8085 microprocessor kit and its memory map, Steps to enter, modify data/program and to execute a programme on 8085 kit, Writing and execution of ALP for addition and subtraction of two 8 bit numbers, Writing and execution of ALP for multiplication and division of two 8 bit numbers, Writing and execution of ALP for arranging 10 numbers in ascending/descending order, Writing and execution of ALP for 0 to 9 BCD counters (up/down counter according to, choice stored in memory), Interfacing exercise on 8255 like LED display control, Interfacing exercise on 8253 programmable interval timer, Interfacing exercise on 8279 programmable KB/display interface like to display the hex, code of key pressed on display, Writing and execution of different ALP for 8086 (any four), Generation of square wave of desired frequency using 8255., , INSTRUCTIONAL STRATEGY, The digital systems in microprocessors have significant importance in the area of electronics., Adequate competency needs to be developed by giving sufficient practical knowledge in, microprocessors (programming as well as interfacing). Help may be taken in the form of charts,, simulation packages to develop clear concepts of the subject. Programming exercises other than, the given in the list may be given to the students., MEANS OF ASSESSMENT, −, −, −, −, , Assignments and quiz/class tests, Mid-term and end-term written tests, Actual laboratory and practical work, exercises, Viva-voce, , RECOMMENDED BOOKS, 1., 2., 3., 4., , Microprocessor Architecture, Programming and Applications with 8080/8085 by Ramesh, S Gaonker, Willey Eastern Ltd. New Delhi, Microprocessor and Applications by Badri Ram: Tata McGraw Hill Education Pvt Ltd ,, New Delhi, Microprocessor programming & applications.by sudhir Goyal, North Publication., Microprocessor and interfacing by Douglas.V.Hall, McGraw Hill Higher Education, New, Delhi., 133

Page 140 :
134, , 5., , E-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR, Chandigarh., , Websites for Reference:, http://swayam.gov.in, , SUGGESTED DISTRIBUTION OF MARKS, , Topic, , Time, , Marks, , Allotted, , Allotted, , (Periods), , (%), , 1., , 05, , 09, , 2., , 05, , 09, , 3, , 05, , 09, , 4, , 09, , 14, , 5., , 06, , 11, , 6., , 06, , 11, , 7., , 06, , 11, , 8., , 06, , 11, , 9., , 06, , 11, , 10., , 02, , 04, , Total, , 56, , 100, , No., , 5.3, FIBER, , OPTICAL, , COMMUNICATION, L T P, 4 - 6, RATIONALE, , 134

Page 141 :
135, , Progressing from communication over copper wire to today’s fiber optic communication, we have, increased our ability to transmit more information, more quickly and over longer distances. This has, expanded our boundaries and is finding a good slot in communication system. Optical fiber has replaced, existing transmission media due to its advantages. As a result the technicians are supposed to have, knowledge of optical communication. This subject will provide basic concepts and requisite knowledge, and skill required for optical fiber communication system., , LEARNING OUTCOMES, After completion of the subject, the students will be able to:, • understand various components and light propagation methods in optical fiber, communication., • demonstrate various types of optical fibers, • identify and test losses in optical fibers, • explain and demonstrate characteristics of optical source and optical detector, • connect and provide joints in optical fibers, • components and tools used in optical fiber, • compare various optical amplifiers, , DETAILED CONTENTS, 1., , Introduction, 1.1, , 1.2, 1.3, , 2., , Historical perspective, basic communication systems, optical, frequency range, advantages of optical fiber communication,, application of fiber optic communication, Electromagnetic spectrum used, Advantages and disadvantages of, optical communication, optical windows., Principle of light penetration, reflection, critical angle, numerical, aperture, acceptance angle., , Optical Fibers, 2.1, , 3., , (06 Periods), , (05 Periods), , Constructional details of various optical fibers, multimode and, mono-mode fibers, step index and graded index fibers, acceptance, angle and types of optical fiber cables., , Losses in Optical Fiber Cable:, , (10 Periods), , 135

Page 142 :
136, , 3.1, 3.2, 3.3, , 4., , Absorption Losses: Scattering Losses, Radiation losses, Connector, losses, Bending loses., Dispersion: Types and its effect on data rate., Testing of losses using OTDR(Optical Time Domain, Reflectometer)., , Optical Sources, , (11 Periods), , Characteristics of light sources (LED and LASER) used in optical, communication, principle of operation of LED, different types of LED, structures used and their brief description, Injection laser diode, principle, of operation, different injection laser diodes, comparison of LED and ILD., 5., Opticalll, Optical Detectors, , (11 Periods), , Characteristics of photo detectors used in optical communication; PNphoto diode, PIN diode and avalanche photo diode (APD),brief idea of, Noise in detectors, 6., , Connectors and splicers, 6.1, , 7., , (05 Periods), , Optical Fibers cable, (Mechanical, fusion), , connectors, , and, , splicing, , techniques, , (08 Periods), , Optical Amplifiers, Types, , of, , optical, , semiconductor, , &, , amplifiers,, , fiber, , optical, , amplifiers, principle of operation of, SOA, types of SOA., amplifiers., , EDFA, Raman, , Comparison, , of, , SOA,, , EDFA and Raman Amplifiers., LIST OF PRACTICALS, 1., , To identify and use various components and tools used in optical fiber communication, , 136

Page 143 :
137, , 2. To set up fiber analog link, 3. To set up optic digital link, 4. To measure bending losses in optical fibers, 5. To observe and measure the splice or connector loss, 6. To measure and calculate numerical aperture of optical fiber, 7. To observe characteristics of optical source, 8. To observe characteristics of optical detector, 9. To splice the available optical fiber, 10. To connect a fiber with connector at both ends, INSTRUCTIONAL STRATEGY, This subject gives the complete knowledge of optical fiber communication techniques. The, teacher should make the students aware about the historical development, optical sources and, optical fiber system in addition to applications of optical fiber in communication system. Since, this subject deals with theory and practical, the theory should be reinforced by visit to sites and, industries like BSNL having optical fiber installations in addition to practical work in the, laboratory., MEANS OF ASSESSMENT, −, −, −, −, −, −, −, , Assignments and quiz/class tests, Mid-term and end-term written tests, Model/prototype making, Actual laboratory and practical work, Model/prototype making, Assembly and disassembly exercises, Viva-Voce, , RECOMMENDED BOOKS, 1., 2., 3., 4., , Optical fiber Communication by John M Senior, Prentice Hall of India, New Delhi, , Optical fiber Communication by J. Gower , Prentice Hall of India, New Delhi, Optical fiber Communication by Gerd Keiser, McGraw Hill International Editions, E-books/e-tools to be used as recommended by AICTE/NITTTR, Chandigarh., Websites for Reference:, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, Topic No., Time Allotted, Marks Allotted, (Periods), (%), 1, 06, 10, 2, 05, 09, 3, 10, 18, 4, 11, 20, 5, 11, 20, 137

Page 144 :
138, , 6, 7, Total, , 05, 08, 56, , 09, 14, 100, , 138

Page 145 :
139, , 5.4 CONSUMER ELECTRONICS, , L T P, 4 - 4, RATIONALE, The objective of teaching this subject is to give students an in depth knowledge of various, electronic audio and video devices and systems. Further this subject will introduce the students, with working principles, block diagram, main features of consumer electronics, gadgets/goods/devices. This in-turn will develop in them capabilities of assembling, fault, diagnosis and rectification in a systematic way., LEARNING OUTCOMES, After completion of the subject, the students will be able to:, •, •, •, •, •, •, , understand the various type of microphones and loud speakers., to identify the various digital and analog signal., describe the basis of television and composite video signal., describe the various kind of colour TV standards and system., compare the various types of digital TV system., understand the various type of consumer goods., DETAILED CONTENTS, , 1., , Audio Systems, 1.1., , 1.2, 2., , (12 Periods), , Microphones and Loudspeakers, a), Carbon, moving coil, cordless microphone, b), Direct radiating and horn loudspeaker, c), Multi-speaker system, d), Hi-Fi stereo and dolby system., Concept to fidelity, Noise and different types of distortion in audio system., , Digital Audio Fundamentals, , (08 Periods), , Audio as Data and Signal, Digital Audio Processes Outlined, Time Compression and, Expansion., 3., , Television, 3.1., , Basics of Television, Elements of TV communication system, Scanning and its need, Need of synchronizing and blanking pulses, VSB, Composite Video Signal, , 3.2, , Colour Television, Primary, secondary colours, Concept of Mixing, Colour Triangle, Camera tube, , (14 Periods), , 139

Page 146 :
140, , 4., , PAL TV Receiver, NTSC, PAL, SECAM ( brief comparison), , Digital Transmission and Reception, -, , (12 Periods), , Digital satellite television, Direct-To-Home(DTH) satellite television, Introduction to :Video on, demand, CCTV, High Definition(HD)-TV., , Introduction to Liquid Crystal and LED Screen Televisions Basic block diagram of, LCD and LED Television and their comparison., 5., , Introduction to different type of domestic/commercial appliances (10 Periods), -, , Operation of Micro-wave oven, Food Processors, Digital Electronic Lock, Vacuum cleaner, Xerox Machine, Scanner, , LIST OF PRACTICALS, 1., 2., 3., 4., 5., 6., 7., , To plot the directional response of a Microphone, To plot the directional response of a Loud Speaker, To study public address system and its components., To perform fault identification in TV., Installation of Dish Antenna for best reception., Installation of CCTV system., To study the various parameters in the Smartphone and Tablet, PC, , MEANS OF ASSESSMENT, −, −, −, , Assignments and quiz/class tests, Mid-term and end-term written tests, Model/prototype making, , RECOMMENDED BOOKS, 1., 2., 3., 4., , Modern Television Practice by R. R. Gulai; New Age International Publishers., Audio Video Systems by R. G. Gupta; McGraw Hill Education System., Audio Video Systems Principles Practices and Troubleshooting by Bali & Bali; Khanna, Publishing Company, Consumer Electronics by S. P. Bali; Pearson Education, New Delhi, , 140

Page 147 :
141, , 5., , e-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR,, Chandigarh., Websites for Reference:, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS:, Topic No., 1, 2, 3, 4, 5, Total, , Time Allotted, (Periods), 12, 08, 14, 12, 10, 56, , Marks Allotted, (%), 21, 15, 25, 21, 18, 100, , 141

Page 148 :
142, , 5.5, , PROGRAMMING USING C, L T P, 4 - 4, , RATIONALE, Computers play a vital role in present day life, more so, in the professional life of technician, engineers. People working in the field of computer industry, use computers in solving problems, more easily and effectively. In order to enable the students use the computers effectively in, problem solving, this course offers the modern programming language C along with exposition, to various applications of computers. The knowledge of C language will be reinforced by the, practical exercises., LEARNING OUTCOMES, After undergoing the subject, the students will be able to:, •, •, •, •, •, •, •, •, •, •, , understand the concepts of C programming language, install C software on the system and debug the programme, identify a problem and formulate an algorithm for it., identify various control structures and implement them., identify various types of variables., use pointer in an array and structure., implement the language control structure, understand and execute member functions of C in the programme, implement array concept in C programme, execute pointers, DETAILED CONTENTS, , 1., , Algorithm and Programming Development, 1.1, 1.2, 1.3, 1.4, , 2., , 3., , Steps in development of a program, Flow charts, Algorithm development, Programme Debugging, Basis of C programming, , Program Structure, 2.1, 2.2, 2.3, 2.4, 2.5, , (06 Periods), , (09 Periods), , I/O statements, assign statements, Constants, variables and data types, Operators and Expressions, Standards and Formatted IOS, Data Type Casting, , Control Structures, , (09 Periods), , 142

Page 149 :
143, , 3.1, 3.2, 3.3, 3.4, 3.5, 4., , Pointers, 4.1, 4.2., 4.3, 4.4, , 5., , (11 Periods), , Introduction to functions, Global and Local Variables, Function Declaration, Standard functions, Parameters and Parameter Passing, Call - by value/reference, Recursion, , Arrays, 6.1, 6.2, 6.3, 6.4, 6.5, 6.6, , (10 Periods), , Introduction to Pointers, Address operator and pointers, Declaring and Initializing pointers,, Single pointer,, , Functions, 5.1, 5.2, 5.3, 5.4, 5.5, 5.6, 5.7, , 6., , Introduction, Decision making with IF – statement, IF – Else and Nested IF, While and do-while, for loop, Break. Continue, goto and switch statements, , (11 Periods), Introduction to Arrays, Array Declaration, Length of array, Single and Multidimensional Array., Arrays of characters, Passing an array to function, Pointers to an array, , LIST OF PRACTICALS, 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., , Programming exercises on executing and editing a C program., Programming exercises on defining variables and assigning values to variables., Programming exercises on arithmetic and relational operators., Programming exercises on arithmetic expressions and their evaluation., Programming exercises on formatting input/output using printf and scanf and their return, type values., Programming exercises using if statement., Programming exercises using if – Else., Programming exercises on switch statement., Programming exercises on do – while, statement., Programming exercises on for – statement., Programs on one-dimensional array., 143

Page 150 :
144, , 12., 13., 14., 15., 16., , Programs on two-dimensional array., (i) Programs for putting two strings together., (ii) Programs for comparing two strings., Simple programs using structures., Simple programs using pointers., Simple programs using union., , INSTRUCTIONAL STRATEGY, The subject is totally practical based., Students should be given clear idea about the, basic concepts of programming. In practical, session student should be asked to draw flow, chart write algorithm and then write program, for the algorithm and run on computer. It is, required that students should maintain records, (files with printouts)., MEANS OF ASSESSMENT, −, −, −, −, −, −, −, −, , Assignments and quiz/class tests, Mid-term and end-term written tests, Actual laboratory and practical work, Exercises, Software installation, Operation, Development, Viva-Voce, , RECOMMENDED BOOKS, 1. Let us C by Yashwant Kanetkar, 2. Programming in ANSI C by E Balaguruswami, Tata McGraw Hill Education Pvt Ltd, New, Delhi, 3. Programming in C by Reema Thareja; Oxford University Press, New Delhi, , 144

Page 151 :
145, , 4. Programming in C by Gottfried, Schaum Series, , Tata McGraw Hill Education Pvt Ltd ,, New Delhi, 5. Exploring C by Yashwant Kanetkar; BPB Publications, New Delhi, 6. E-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR,, Chandigarh, Websites for Reference:, http://swayam.gov.in, SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1, 2, 3, 4, 5, 6, Total, , Time Allotted, (Periods), 06, 09, 09, 10, 11, 11, 56, , Marks Allotted (%), 12, 15, 15, 18, 20, 20, 100, , 145

Page 152 :
146, , 5.6, , MINOR PROJECT WORK, L T P, - - 6, , LEARNING OUTCOMES, After undergoing this subject, the student will be able to:, • Use effectively oral, written and visual communication, • Demonstrate skill and knowledge of current information and technological tools and, techniques specific to the professional field of study., • Identify, analyze and solve problems creatively through sustained critical investigation., • Develop co-worker and leadership abilities., • Apply fundamental and disciplinary concepts and methods in ways appropriate to their, areas of study., Minor project work aims at exposing the students to various industries dealing with computers., It is expected from them to get acquainted with computer environment. For this purpose, student, during middle of the course are required to be sent for a period of two to four weeks at a stretch, in different establishments. Depending upon the interest of students they are sent for exposure to:, 1., Industrial practices in installation and maintenance of computers and computer networks, 2., Fabrication of computers, 3., Fault diagnosis and testing of computers, 4., Industrial practices in respect of documentation and fabrication, 5., A variety of computers and peripherals in assembly organizations, 6., Software package development organizations, 7., Maintenance of database, 8., Write procedure or functions which can be attached as the library objects to the main, projects, 9., Write a procedure function to convert number of words., 10., Write a procedure function to convert all data function (create your own) Database, connectivity, (SQL server, Oracle, Access), Library classes in C++ (same application).,, 11., design web applications using PHP, Note: The teachers may guide /help students to identify their minor project work and, check out their plan of action well in advance., As a minor project activity each student is supposed to study the operations at site and prepare a, detail project report of the observations/processes/activities by him/her. The students should be, guided by the respective subject teachers. Each teacher may guide a group of 4 to 5 students., The teachers along with field supervisors/engineers will conduct performance assessment of, students. Criteria for assessment will be as follows:, Criteria, Attendance and Punctuality, Initiative in performing tasks/creating, new things, Relation with people, Report Writing, , Weightage, 15%, 30%, 15%, 40%, , 146

Page 153 :
147, , 6.1, , MICROWAVE AND RADAR ENGINEERING, L T P, 4 - 4, , RATIONALE, This subject includes an exposure to microwaves engineering, radar systems, fiber optics and, satellite communication. In microwaves industry, job opportunities are available in the area of, assembly, production, installation, repair and maintenance of microwave transmitters and, receivers. The knowledge of radar systems allows opportunities with civil and defense, organizations dealing with aircraft and shipping. Fiber optics is the latest thrust area in, communication with vast opportunities in the private sector., LEARNING OUTCOMES, After completion of the course, the students should be able to:, •, •, •, •, •, •, •, •, , identify and demonstrate operating principles and typical applications of tubes and, diodes., understand the various types and propagation modes of wave guides, describe the various types of antennas and wave propagation techniques, know the basic principle of radar and interpret the various parameters used in radar, equations, measure VSWR of a given load, identify the block diagram and explain the operating principles of CW(Doppler), FMCW,, MTI radar, interpret radar display PPI, describe the working principles of microwave communication link, , DETAILED CONTENTS, 1., , Introduction to Microwaves, , (12 Periods), , Introduction to microwaves and its applications, Classification on the basis, of its frequency bands (HF, VHF, UHF, L, S, C, X, Ku, Ka, Sub mm), , Microwave Devices, Characteristics, operating principles and typical applications of the, following devices (No mathematical treatment), 147

Page 154 :
148, , 2., , Multi cavity klystron, Reflex klystron, Multi-cavity magnetron, Traveling wave tube, Gunn diode, IMPATT diode, TRAPATT diode, PIN diode, , Wave guides, , (10 Periods), , Rectangular and circular wave guides and their applications. Mode of, wave guide; Propagation constant of a rectangular wave guide, cut off, wavelength, guide wavelength and their relationship with free space, wavelength (no mathematical derivation). Impossibility of TEM mode in a, wave guide., 3., , Antenna and Wave Propagation, -, , -, , -, , -, , -, , (12 Periods), , Physical concept of radiation electromagnetic energy from an antenna,, relationship between the direction of electric and magnetic fields with, direction of propagation; concept of polarization of EM waves., Electromagnetic spectrum and its various range VLF, LF, HF, VHF,, UHF, Micro wave, Optical waves etc., Definition and physical concepts of the terms used with antennas like, point source, gain, power gain, directivity aperture, effective area,, radiation pattern, (field strength power and phase) beam angle, beam, width and radiation resistance., Types of antennas- Brief description, characteristics and typical, applications of medium wave antenna, shortwave antenna, HF, antenna, VHF, UHF and Microwave antenna e.g., half wave dipole,, ground plane, yagi and ferrit rod antenna in transistor receiver. Brief, idea about rhombic antenna, dish antenna, Horn, Parabolic reflector, and Lens antenna., Antenna arrays-Brief description of broad side and end fire arrays, their radiation pattern and application (without analysis), Basic idea about different modes of radio wave propagation- ground, wave propagation, space wave propagation and sky wave propagation,, their characteristics and typical areas of application. (e.g. medium, wave, short wave, TC communication.), Explanation of the terms-critical frequency, maximum usable, frequency (MUF) and skip distance., , 148

Page 155 :
149, , 4., , Radar Systems, , (10 Periods), , − Introduction to radar, its various applications, radar range equation, (no derivation) and its applications., 5. Satellite Communication, -, , (12 Periods), , Basic idea passive and active satellites., Meaning of the terms Orbit, Apogee and Perigee, Geo- stationary satellite and its need., Block diagram and explanation of a satellite communication link., Differentiate between various types of satellites., , LIST OF PRACTICALS, 1., 2., 3., 4., 5., 6., 7., , To measure electronics and mechanical tuning range of a reflex klystron, To measure VSWR of a given load., To plot radiation pattern of horn antenna in horizontal and vertical plane., To plot VI characteristics of GUNN-Diode., To determine the frequency and wavelength of a rectangular waveguide working in, TE10 mode., To study and test various parameters such as gain, noise, bandwidth and voltage at, different point of a microwave amplifier., To measure the power gain and beam width of a microwave dish antenna., , NOTE, Visit to the appropriate sites of microwave station/tower and communication stations should be made to, understand their working. A comprehensive report must be prepared by all the students on these visits,, especially indicating the dates and locations of their visits., , INSTRUCTIONAL STRATEGY, Microwave and radar engineering is very important subject and requires both theoretical as well as, practical exposure. The teaching should be supplemented by visits to the microwave stations and using, suitable audio visual aids., , MEANS OF ASSESSMENT, , 149

Page 156 :
150, , − Assignments and quiz/class tests, mid-term and end-term written tests, model/prototype, making, − Actual laboratory and practical work, model/prototype making, assembly and disassembly, exercises and viva-voce, RECOMMENDED BOOKS, 1., , 2., 3., 4., 5., 6., , Microwave Devices and Components by Sylio; Prentice Hall of India, New Delhi, Electronics Communication by Roddy and Coolen; Pearson Publishers., Electronics Communication System by KS Jamwal; Dhanpat Rai and Sons, Delhi, Microwave Engineering by Das; Tata McGraw Hill Education Pvt Ltd , New Delh, Microwave & Radar Engineering by Navneet Kaur; Ishan Publications, Ambala, City, e-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR,, Chandigarh., , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., , 2., 3., 4., 5., Total, , Time Allotted, (Periods), 12, 10, 12, 10, 12, 56, , Marks Allotted, (%), 22, 18, 22, 18, 20, 100, , 150

Page 157 :
151, , 6.2, , MICROCONTROLLERS & EMBEDDED SYSTEM, L T P, 6 - 6, , RATIONALE, The study of microcontrollers in terms of architecture, software and interfacing techniques leads, to the understanding of working of microcontrollers and applications of microcontroller in, electronic industries. Microcontroller is the heart of the programmable devices. Embedded, systems and Micro-controllers have also assumed a great significance in the electronic and, consumer goods industry and are a very vital field. Students of electronics and related, engineering branches often use microcontroller to introduce programmable control in their, projects, automation and fault finding in industry. The subject aims expose students to the, embedded systems besides giving them adequate knowledge of micro controllers., LEARNING OUTCOMES, After completion of the subject, the learner should be able to:, • understand the working of microcontrollers, • understand the Instruction set and programming related to microcontrollers, • describe embedded system, • explain embedded operating systems, • program PIC microcontroller and AVR microcontroller, • interface sensors with microcontroller, DETAILED CONTENTS, 1., , Microcontroller series (MCS), 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, , 2., , Architecture of 8051Microcontroller, Pin details, I/O Port structure, Memory Organization, Special Function Registers (SFRs), External Memory, , Instruction Set for Microcontroller Programming, 2.1, 2.2, 2.3, 2.4, 2.5, , (14 Periods), , (16 Periods), , Instruction Set of 8051, Addressing Modes,, Types of Instructions, Timer operation, Serial Port operation, 151

Page 158 :
152, , 2.6 Interrupts, Introduction to Embedded System, , 3., , (08 Periods), , Embedded system, history of embedded systems, embedded system architecture,, Functional structure of embedded system, 4., , Embedded operating systems, , (10 Periods), , Real-time operating system, factors affecting embedded systems, applications of, embedded systems, embedded systems characteristics and features,, 5., , Introduction of PIC microcontroller, block diagram, function of (10 Periods), each block. Introduction of AVR microcontroller, block diagram,, function of each block., 6., , Programming concepts of microcontrollers. Basic introduction of, Software used in microcontrollers. How to transfer C or, ASM code in microcontrollers., , 7., , Input/output interface, Sensors, 7-segemtn display, LCD, LED and relay, , 8., , Internet of Things, Introduction to Internet of things, Application, architecture, protocols, Functional blocks of IoT, Characteristics of IoT, Brief idea of Arduino IDE, , (10 Periods), , (08 Periods), , (08 Periods), , LIST OF PRACTICALS, 1., 2., 3., 4., 5., 6., 7., 8., 9., , Familiarization with Micro-controller Kit and its different sections, Programming to interface switches and LEDs, Programming and interface of Seven Segment and LCD., Programming for A/D converter, result on LCD., Programming for D/A converter, result on LCD., Programming for serial data transmission from PC to Kit or Vice versa., Programming and interfacing of RELAY and Buzzer, Design PIC based Security System, Design AVR based Temperature indicator cum controller., , Practical using Arduino-interfacing sensors, , 152

Page 159 :
153, , 1., 2., 3., 4., , Interfacing Light Emitting Diode(LED)- Blinking LED, Interfacing Button and LED – LED blinking when button is pressed, Interfacing Light Dependent Resistor (LDR) and LED, displaying automatic night lamp, Interfacing Relay module to demonstrate Bluetooth/wifi based home automation, application. (using Bluetooth/wifi and relay)., , INSTRUCTIONAL STRTEGY, Instruction should be given to students by showing them actual microcontrollers in the class, room so that they can develop the concept. Exercise on programming should be done by taking, simple examples like interfacing of switch, LED and relay., MEANS OF ASSESSMENT, • Assignments and quiz/class tests, • Mid-term and end-term written tests, • Actual laboratory and practical work, • Model making, • Viva-Voce, RECOMMENDED BOOKS:1. Fundamentals of Microprocessor and Microcontroller by B. Ram , Dhanpat Rai, Publications., 2. Microcotroller and Embedded Systems using Assembly And C by Muhammad Ali, Mazidi, RolinMckinlay, Janice GilispieMazidi: Pearson, 3. PIC Microcontroller and Embedded Systems : Using assembly and C by Muhammad Ali, Mazidi, RolinMckinlay, Danny Causey; Pearson, 4. Microcotroller and Embedded Systems using Assembly and C by Muhammad Ali, Mazidi, RolinMckinlay, Janice GilispieMazidi, Pearson, 5. Embedded Systems - Architecture, Programming, Design, by Kamal, R. Tata McGraw, Hill, New Delhi, 6. YashavantKanetkar, ShrirangKorde, “21 Internet Of Things (IOT) Experiments”, 7. NeerparajRai , “Arduino Projects For Engineers”, 8. E-books/e-tools/relevant software to be used as recommended by AICTE/ NITTTR,, Chandigarh., , 153

Page 160 :
154, , SUGGESTED DISTRIBUTION OF MARKS, , Topic No. Time Allotted Marks Allotted, (Periods), (%), 1, 14, 16, 2, 16, 18, 3, 08, 10, 4, 10, 12, 5, 10, 12, 6., 10, 12, 7., 08, 10, 8., 08, 10, Total, 84, 100, , 154

Page 161 :
155, , 6.3, , WIRELESS AND MOBILE COMMUNICATION, L T P, , 4 - 6, RATIONALE, The wireless/mobile communication technology though complex but is spreading at a very fast, rate. People use more of mobile phones in comparison to land line phones. It is expected that, within very short period, almost everybody will be using mobile communication. Technology is, also changing very fast. Therefore, the students should know the functioning of wireless/mobile, system/equipment to keep themselves abreast of this latest application of communication., LEARNING OUTCOMES, After completion of the course, the students will be able to:, •, •, •, •, •, •, •, •, , identify and explain the features, specification and working of cellular mobile, measure and analyze signal strength at various points from a transmitting antenna with, mobile phone., understand generation of cellular phones., describe and analyze different Multiple Access Techniques for Wireless Communication, (FDMA, TDMA and CDMA), describe different Mobile Communication Systems(GSM and CDMA), demonstrate call processing on a GSM and CDMA trainer Kit, demonstration of SIM, LTE, Vo-LTE and mobile network, describe the idea of LAN, MAN, WAN, , DETAILED CONTENTS, 1., , Wireless Communication, 1.1, 1.2, 1.3, 1.4, 1.5, , 2., , (10 Periods), , Basics, Advantages of wireless communication, Electromagnetic waves., Frequency Spectrum used., Cellular Network Systems., , Cellular Concept, , (10 Periods), 155

Page 162 :
156, , 2.1., 2.2, 2.3., 2.4., 2.5., 2.6, 2.7, 2.8, , 3, , Introduction to 1G, 2G, 3G, 4G, and 5G, Cell area, Cell Site Structure, Capacity of cell, Frequency Reuse (Concept), Interference (Co-channel, Adjacent channel), Power Control for reducing Interference, Fundamentals of cellular network planning, a) Coverage planning, b) Capacity planning, c) Cell splitting and sectoring, , Multiple Access Techniques for Wireless Communication, 3.1, 3.2, 3.3, 3.4, 3.5, , (10 Periods), , Introduction to Multiple Access., Frequency Division Multiple Access (FDMA), Time Division Multiple Access (TDMA), Distinction between TDMA FDD and TDMA TDD, Code Division Multiple Access (CDMA), WCDMA, , 4., , Introduction to Bluetooth technology and Wifi Technology, , 5., , Mobile Communication Systems, (14 Periods), 5.1, Introduction of Global Systems for Mobile Communication (GSM) and its, architecture, Introduction of CDMA System, comparison of CDMA and GSM, Systems and frequency bands., 5.2, Introduction to GPRS and EDGE, 5.3, Introduction to Architecture and Features of UMTS, 5.4, HSPA (High Speed Packet Access), 5.5, Features and Architecture of LTE (Long Term Evolution), Vo-LTE(Voice Over, Long Term Evolution), 5.6, Brief description of Y-Max technology and SIM, IMIE, 5.7, Introduction to GPS(Global Position System), , 6. Digital and Data Communication, 6.1, , 6.2, , (02 Periods), , (10 Periods), , Data Transmission Basics: Review of digital data anlog modulation and digital, formats. Data rates, Baud Rates, Channel capacity, Mediums for communication,, Synchronous and ashnchronous data communication., ISO-OSI model and TCP/IP model of network, Protocols and services., Connection oriented and connectionless services., 156

Page 163 :
157, , 6.3, 6.4, , IEEE 208 standards for computer networks., Internet and ISDN services., , 157

Page 164 :
158, , LIST OF PRACTICALS, 1., 2., 3., 4., 5., 6., , Study the features, specification and working of cellular mobile, Measurement of signal strength at various points from a transmitting antenna, Demonstration of Base Trans Receiver(BTS) with nearby cellular tower, Observing call processing of GSM trainer kit., Repair of a GSM mobile phone, Troubleshooting GSM Mobile Phone, − Assembling and dissembling of GSM phone, − Study parts of Mobile Phone, − Testing of various parts, , INSTRUCTIONAL STRATEGY, Wireless and Mobile Communication is having significant impact in Electronics Market. For the, proper awareness of this subject, it is must to provide the students the detailed functioning of, wireless/mobile system/equipment. For this, visits must be arranged to BTS/MSC (Mobile, Switching Centre) providers. The theory classes need to be application based in addition to, industrial visits to mobile companies, MEANS OF ASSESSMENT, − Assignments and quiz/class tests, − Mid-term and end-term written tests, − Model/prototype making, − Actual laboratory and practical work, − Assembly and disassembly exercises, − Viva-Voce, RECOMMENDED BOOKS, 1., 2., 3., 4., 5., , Wireless Communications, Principles and Practice, by ThedoreS.Rappaport., Wireless Communications and Networking, by William Stallings., Mobile and Personal Communication Systems and Services, by Raj Pandya, Prentice Hall, of India, New Delhi, Wireless and Mobile Communication VK Sangar, Ishan Publication, Ambala., E-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR., , Websites for Reference:, http://swayam.gov.in, , 158

Page 165 :
159, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., , 2., 3., 4., 5., 6., , Time Allotted, (Periods), 10, 10, 10, 02, 14, 10, 56, , Marks Allotted, (%), 18, 18, 18, 03, 25, 18, 100, , Total, , 159

Page 166 :
160, , 6.4.1 CONTROL SYSTEM, L T, 4, -, , P, 2, , RATIONALE, A diploma holder when employed in automation industry such as automated power stations will, be required to know the basics of control system and process variables. Early automation, systems were mechanical in design, the timing and sequencing being affected by gears and cams., Now these design concepts were replaced by electrical drives and are controlled by PI of PID, controllers. Diploma holders in industry are responsible to design, modify and troubleshoot such, control circuits. Looking at the industrial application of control system in the modern industry,, this subject finds its usefulness in the present curriculum., LEARNING OUTCOMES, After completion of courses the learner should be able to:, •, •, •, •, •, •, •, , understand the concept of open loop and close loop system, understand various types of signals in control system, determine Transfer function of a Control System, explain various parameter of first order and second order Control System, determine the stability of a Control System, understand use of various controller in a Control System, apply controllers in various industrial applications, DETAIL CONTENT, , 1., , Introduction to Control System, 1.1, 1.2, 1.3, 1.4, 1.5, , (12 Periods), , Open loop Control System, block diagram and its elements, properties and, application, Close app Control System, block diagram and its elements, properties and, application (with example), Block diagram of feedback Control System and its elements, Comparison between open and close loop Control System, Definition and Explanation of the following Control System, a) Linear and Non linear System, b) Continuous and Discrete System, c) Static and dynamic System, , 160

Page 167 :
161, , 2. Basic Signals, , (04 Periods), , 2.1 Basic idea of impulse signal, unit step, ramp, and its Laplace transform, 3. Transfer Function, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, 3.7, , Definition of Transfer function and its use in Control System, Transfer function of the following:, Open loop and Close loop System, Simple RC low pass and High pass filter, Characteristic Equation, Pole-Zero Concept of Transfer Function, Initial value and final value theorem., , 4. Time Domain Analysis, 4.1, 4.2, 4.3, 4.4, , (08 Periods), , (12 Periods), , Time response of first order system with unit step input, Time response of second order system with unit step input, Basic idea of delay time, rise time, setting time, steady state error, max overshoot,, Damping ratio (No Derivation), Over damped, under damped, critically damped, un damped system (basic idea, only) and Pole-zero representation, Nature of transit response, Damping ration, (No Derivation), , 5. Stability Theory, , (10 Periods), , 5.1 Basic concept of stability analysis by Routh-Hurwitz Criterion, 6. Basic Controller, (10 Periods), 6.1, Introduction,, 6.2, Need of controller, 6.3, Type of controller (Basic idea and Mathematical expression only), a), On-off controller, b), Proportional controller, c), PD controller, d), PI controller, e), PID controller, LIST OF PRACTICALS, 1., 2., , To obtain a transient response of first order system with unit step input, To obtain a transient response of second order system with unit step input, 161

Page 168 :
162, , 3., 4., 5., 6., 7., , To observe the output waveform of a under damped system with unit step input, To observe the output waveform of a over damped system with unit step input, To observe the output waveform of a critically damped system with unit step input, To observe the output waveform of a undamped system with unit step input, To observe the output waveform of a plant controlled by P, PI and PID controllers., , INSTRUCTIONAL STRATEGY, The subject requires more emphasis on closed, loop, , controlled, , system., , Visit, , to, , instrumentation and communication industries, most be carried out, so as to make students, understand, , where, , and, , how, , various, , instruments are used in the industry., MEANS OF ASSESMENT, -, , Class test/Quiz, , -, , Home Assignments, , -, , Attendance, , -, , Sessional and end semester examination, RECOMMENDED BOOKS, , 162

Page 169 :
163, , 1.Modern Control Engineering by K. Ogata; PHI, Publications., 2.Control System Engineering by I. J Nagrath, and, , M.Gopal;, , New, , Age, , International, , Publishers., 3.Linerar, , Control, , System, , by, , B.S, , Manke;, , Knanna Publishers, 4.E-book/e-tools/relevant software to be used, as, , recommended, , by, , AICTE/NITTTR,, , Chandigarh., Websites for Reference:, http://swayam.gov.in, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., 1., 2., 3., 4., 5., 6., Total, , Time Allotted, (Periods), 12, 04, 08, 12, 10, 10, 56, , Marks Allocation, (%), 22, 06, 14, 22, 18, 18, 100, , 163

Page 170 :
164, , 6.4.2., , MEDICAL ELECTRONICS, L T, 4 -, , P, 2, , RATIONALE, A large number of electronic equipment s are being used in hospitals for patient care and, diagnosis or carry out advanced surgeries. This subject will enable the students to learn the basic, principles of different instruments used in medical science., LEARNING OUTCOMES, After undergoing the subject, students will be able to:, • describe various medical electronics equipment and their uses, • use electrodes for various purposes, • identify different types of bio-medical transducers, • understand the working of biomedical recorders, • measure various parameters required for patient monitoring system, • use modern imaging system, • identify the various patient safety standards., DETAILED CONTENTS, 1., , Overview of Medical Electronics, classification of medical Equipments, application and, specifications of diagnostic, therapeutic and clinical laboratory equipment, method of, operation of these instruments, typical waveforms & signal characteristics, (06 Periods), , 2., , Electrodes, , (08 Periods), , Origin of Bioelectric signals, Bio electrodes, Electrode tissue interface, contact, impedance, Types of Electrodes, Biological Amplifiers, Gelies, Electrodes used for ECG, , EEG, EMG., 3., , Bio Transducers & Biosensors, , (08 Periods), , Typical signals from physiological parameters, Classification of Bio transducers, pressure, transducer, Photoelectric transducer, Transducer for body temperature measurement,, pulse sensor, respiration sensor., 4., , Bio Medical Recorders, , (12 Periods), , Block diagram description and application of following instruments, 4.1 Electrocardiograph (ECG) Machine, 164

Page 171 :
165, , 4.2, 4.3, 4.4, 4.5, 4.6, 5., , Electroencephalograph (EEG) Machine, Electromyography (EMG) Machine, Phonocardiogram (PCG), Vector cardiogram (VCG), Digital Stethoscope, , Patient Monitoring Systems, , (10 Periods), , 5.1 Heart rate measurement, 5.2 Pulse rate measurement, 5.3 Respiration rate measurement, a. Blood pressure measurement, b. Need of defibrillator and Cardiac Pace maker, c. Bedside patient monitoring System, 6., , Modern Imaging System, 6.1, 6.2, 6.3, , 7., , X-Ray Machine, Magnetic Resonance Imaging System, Ultrasonic Imaging System, , Patient Safety, 7.1, 7.2, 7.3, 7.4, 7.5, , (08 Periods), , (04 Periods), , Electric shock hazards, Leakage currents, Electrical safety analyser, Safety standards., CT-Scan, , Note: Students must be taken for a visit to hospital for exposure of various medical electronics, related equipments like ventilator, boyles apparatus, pulse ox meters, defibrillators,, bedside monitor and x-ray equipment etc., INSTRUCTIONAL STRATEGY, The teacher has to play a proactive role in arranging visits to hospitals and well equipped, laboratories to reinforce theory. The apparatus and equipment available should be shown to, students so that they can understand where and how the various biomedical instruments are used., Various charts and models be used for demonstration. Exposure to Spectrometer and UV, Spectrometer must be given to students in addition to arranging visits to biomedical industries., LIST OF PRACTICALS, 1 . To operate and familiarization with:, 165

Page 172 :
166, , 2., , 3., 4., , 5., 6., 7., 8., , a) B.P. Apparatus, b) ECG Machine, To operate and familiarization with:, a) Ventilator, b) Incubator, To measure the concentration of blood sugar with Glucometer (fasting, P.P., Random), To measure, a) Respiration rate and interface to PC, b) Pulse rate, To Measure The EMG Signals and interface with PC, Body Temperature measurement and recording in excel form in pc., Installation of medical equipment in laboratories of Hospital precautions to be taken., Operation and use of Electro-physiotherapy, , MEANS OF ASSESSMENT, − Assignments and quiz/class tests, − Mid-term and end-term written tests, − Model/prototype making, − Actual laboratory and practical work, − Assembly and disassembly exercises Viva-Voce, RECOMMENDED BOOKS, 1., 2., 3., 4., 5., , Handbook of Biomedical Instrumentation by RS Khandpur;Tata McGraw Hill Education, Pvt Ltd, New Delhi, Biomedical Instrumentation by Cromwell PHL, Modern Electronics Equipment by RS Khandpur; TMH, New Delhi, Introduction to Biomedical Electronics by Edward J. Perkstein; Howard Bj, USA, e-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR., , Websites for Reference:, http://swayam.gov.in, , 166

Page 173 :
167, , SUGGESTED DISTRIBUTION OF MARKS, Topic No., , Time Allotted, (Periods), , Marks Allocation, (%), , 1, , 06, , 12, , 2, , 08, , 16, , 3, , 08, , 16, , 4, , 12, , 20, , 5, , 10, , 16, , 6, , 08, , 12, , 7, , 04, , 8, , Total, , 56, , 100, , 167

Page 174 :
168, , 6.4.3, , COMPUTER NETWORKS, L T P, 4 - 2, , RATIONALE, The future of computer technology is in computer networks. Global connectivity can be, achieved through computer networks. A diploma holder in electronics and communication, engineering should therefore understand the function of networks. Knowledge about hardware, and software requirements of networks is essential., LEARNING OUTCOMES, After completion of the course, the learner should be able to, •, •, •, •, •, •, •, •, •, •, •, , recognize physical topology and cabling (coaxial, OFC, UTP, STP) of a network., recognize various types of connectors RJ-45, RJ-11,BNC and SCST., demonstrate various types of networking models and protocol suites., install and configure a network interface card in a workstation., identify the IP address of a workstation and the class of the address and configure the IP, Address on a workstation., configure routers., demonstrate sub netting of IP address., identify connectivity troubleshooting using PING, IPCONFIG, IFCONFIG., explain concept of wireless networking., configure different Network devices., understand network security management and configuration., , DETAILED CONTENTS, 1., , Networks Basics, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, , 2., , What is network, Peer-to –peer Network, Server Client Network, LAN, MAN and WAN, Network Services, Network Topologies, Switching Techniques, , OSI Model, 2.1, 2.2, , (08 Periods), , (08 Periods), , Standards, OSI Reference Model, 168

Page 175 :
169, , 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 3., , Introduction to TCP/IP, 3.1, 3.2, 3.3, 3.4, 3.5, 3.6, , 4., , 4.2, , 4.3, , 6., , (09 Periods), , Network connectivity Devices, NICs, Hubs, Bridges, Repeaters, Switches, Routers and Routing Protocols, Routing Algorithm, Configuring of Routers., VOIP and Internet Telephony, , Network Administration / Security, 6.1, 6.2, , (08 Periods), , Types of Cables( Coaxial, Twisted Pair), Shielded and Unshielded Pair of Cables,, fiber optic cable., (Straight through Cable, Cross Over Cables) with colour coding., Ethernet Specification and Standardization:, 10 Mbps (Traditional Ethernet), 100 Mbps (Fast Ethernet) and 1000 Mbps, (Gigabit Ethernet),Leased lines., Use of RJ45, RJ11, BNC,SCST., , Network Connectivity, 5.1, 5.2, 5.3, 5.4, 5.5, 5.6, 5.7, 5.8, 5.9, , (08 Periods), , Concept of physical and logical addressing, Different classes of IP addressing, special IP address, Sub netting and super netting, Loop back concept, IPV4 and IPV6 packet Format, Configuring IPV4 and IPV6, , Cables and Connectors, 4.1, , 5., , OSI Physical layer concepts and application, OSI Data-link layer concepts and application, OSI Networks layer concepts and application, OSI Transport layer concepts and application, OSI Session layer concepts and application, OSI presentation layer concepts and application, OSI Application layer concepts and application, , (09 Periods), , Client/Server Technology, Server Management, 169

Page 176 :
170, , 6.3, 6.4, 6.5, 7., , RAID management and mirroring, Cryptography, Ethical Hacking, , Wireless Networking, , (06 Periods), , Basics of Wireless: Wireless MAN, Networking, Wireless LAN, Wi-Fi, WiMax (Broad-band, Wireless) and Li-Fi., LIST OF PRACTICALS, 1., 2., 3., 4., 5., 6., 7., , Configure local area network using topologies., Configure different network devices used in LAN- hub/switch/routers/bridges., Create different types of cables for straight through and cross over cable, Configure Ethernet network, Install NIC and locate MAC address, Configure TCP/IP addressing, Install Network printer and sharing content, , INSTRUCTIONAL STRATEGY, This subject deals with both theory and practicals. The students should be made to practically, establish LAN with various hardware and software and their integration., MEANS OF ASSESSMENT, −, Assignments and quiz/class tests, −, Mid-term and end-term written tests, −, Model/prototype making, −, Actual laboratory and practical work, model/prototype making, assembly and, disassembly exercises and viva-voce, , RECOMMENDED BOOKS, 5., 6., 7., 8., , Computer Networks by Tanenbaum, Prentice Hall of India, New Delhi, Data Communications and Networking by Forouzan, (Edition 2nd and 4th ),Tata McGraw, Hill Education Pvt Ltd , New Delhi, Data and Computer Communication by William Stallings, Pearson Education, New Delhi, e-books/e-tools/relevant software to be used as recommended by AICTE/NITTTR., , Websites for Reference:, http://swayam.gov.in, , 170

Page 177 :
171, , SUGGESTED DISTRIBUTION OF MARKS, 6.5, , Topic No., 1., 2., 3., 4., 5., 6., 7., Total, , Time Allotted, (Periods), 08, 08, 08, 08, 09, 09, 06, 56, PROJECT WORK, , Marks Allotted, (%), 15, 15, 14, 14, 15, 15, 12, 100, L T P, - - 8, , RATIONALE, Project Work aims at developing innovative skills in the students whereby they apply in totality, the knowledge and skills gained through the course work in the solution of particular problem or, by undertaking a project. In addition, the project work is intended to place students for project, oriented practical training in actual work situation for the stipulated period., LEARNING OUTCOMES, After undergoing the project work, the students will be able to:, •, , Apply in totality the knowledge and skills gained through the course work in the, solution of particular problem or by undertaking a project., , •, , Develop understanding regarding the size and scale of operations and nature of fieldwork in which students are going to play their role after completing the courses of study, , •, , Develop understanding of subject based knowledge given in the classroom in the context, of its application at work places., , •, , Develop firsthand experience and confidence amongst the students to enable them to use, and apply polytechnic/institute based knowledge and skills to solve practical problems, related to the world of work., , •, , Develop abilities like interpersonal skills, communication skills, positive attitudes and, values etc., Assemble/fabricate and test an electronics gadget., , •, , General Guidelines, , 171

Page 178 :
172, , The individual students have different aptitudes and strengths. Project work, therefore, should, match the strengths of students. For this purpose, students should be asked to identify the type of, project work, they would like to execute. The activity of problem identification should begin, well in advance (say at the end of second year). Students should be allotted a problem of interest, to him/her as a major project work. It is also essential that the faculty of the respective, department may have a brainstorming session to identify suitable project assignments for their, students. The project assignment can be individual assignment or a group assignment. There, should not be more than 3 students if the project work is given to a group. The project work, identified in collaboration with industry should be preferred., This practical training cum project work should not be considered as merely conventional, industrial training in which students are sent at work places with either minimal or no, supervision. This experience is required to be planned in advance and supervised on regular basis, by the polytechnic faculty. For the fulfillment of above objectives, polytechnics may establish, close linkage with 8-10 relevant organization for providing such an experience to students. It is, necessary that each organization is visited well in advance and activities to be performed by, students are well defined. The chosen activities should be such that it matches with the curricular, interest to students and of professional value to industrial/ field organizations. Each teacher is, expected to supervise and guide 5-6 students., Some of the project activities are given below:, Projects related to designing small electronic equipment / instruments., Projects related to increasing productivity in electronic manufacturing areas., Projects related to quality assurance., Projects connected with repair and maintenance of plant and equipment., Projects related to design of PCBs., Projects related to suggesting substitutes of electronics components being used., Projects related to design of small oscillators and amplifier circuits., Projects related to design, fabrication, testing and application of simple digital circuits, and components., Projects related to microprocessor/microcontroller based circuits/ instruments., Some of the projects based on above areas are listed below for the benefit of students:, 1., Microprocessor/Microcontroller based rolling display/bell and calendar, 2., Microprocessor based stepper motor control., 3., Speed control of DC Machines by Microprocessor/Microcontrollers, 4., Temperature monitoring using Microprocessor/Microcontroller based systems., 5., Microprocessor/Microcontroller based liquid level indicator and control, 6., Fabrication and assembling of digital clock., 7., Fabrication of ON line/OFF line UPS of different ratings and inverters, 8., Design, fabrication and testing of different types of experimental boards, 9., Repair of oscilloscope, function generator, 10., Microprocessor/Microcontroller based solar tracking system, 11., GSM based car or home security system, 12., Bank token display using microcontroller, 13., Microprocessor/Microcontroller Based A/D converter, 14., Microprocessor/Microcontroller Based D/A converter, 15., Simulation of half wave and full wave rectifiers using Simulation Software, 172

Page 179 :
173, , 16., 17., 18., 19., 20., 21., 22., , Simulation of class A, Class B, Class AB and Class C amplifiers, Simulation of different wave forms like sine, square, triangular waves etc., GPS based vehicle tracking system, Calculate BER(Bit Error Rate) of various modulation techniques, Electronic Weighing Machines, Setting up home security system using biometrics and video recording, Making an overhead tank water level controller using a pump and control system, , 23., , PLC based water level controller/sequential motor starter/bottling plant/traffic light, control., , NOTE:, The list is only the guideline for selecting a project; however a student is at liberty to select any, other related project of his choice independently under guidance of his teacher., A suggestive criterion for assessing student performance by the external (person from industry), and internal (teacher) examiner is given in table below:, Sr., No., 1., 2., 3., 4., , 5., 6., 7., 8., 9, , Performance Criteria, , Max.**, Marks Excel, lent, Selection of project assignment, 10%, 10, Planning and execution of, 10%, 10, considerations, Quality of performance, 20%, 20, Providing solution of the, 20%, 20, problems or production of final, product, Sense of responsibility, 10%, 10, Self expression/, 5%, 5, communication skills, Interpersonal skills/human, 5%, 5, relations, Report writing skills, 10%, 10, Viva voce, 10%, 10, Total marks, 100, 100, , Rating Scale, Very, Good Fair, Good, 8, 6, 4, 8, 6, 4, , Poor, 2, 2, , 16, 16, , 12, 12, , 8, 8, , 4, 4, , 8, 4, , 6, 3, , 4, 2, , 2, 1, , 4, , 3, , 2, , 1, , 8, 8, 80, , 6, 6, 60, , 4, 4, 40, , 2, 2, 20, , The overall grading of the practical training shall be made as per following table., In order to qualify for the diploma, students must get “Overall Good grade” failing which the, students may be given one more chance to improve and re-evaluate before being disqualified and, declared “not eligible to receive diploma ”. It is also important to note that the students must get, more than six “goods” or above “good” grade in different performance criteria items in order to, get “Overall Good” grade., , 173

Page 180 :
174, , Range of maximum marks, i), , More than 80, , ii), iii), iv), v), , 79 <> 65, 64 <> 50, 49 <> 40, Less than 40, , Overall grade, Excellent, Very good, Good, Fair, Poor, , Important Notes, 1., , This criteria must be followed by the internal and external examiner and they should see the, daily, weekly and monthly reports while awarding marks as per the above criteria., , 2., , The criteria for evaluation of the students have been worked out for 200 maximum marks., The internal and external examiners will evaluate students separately and give marks as per, the study and evaluation scheme of examination., , 3., , The external examiner, preferably, a person from industry/organization, who has been, associated with the project-oriented professional training of the students, should evaluate, the students performance as per the above criteria., , 4., , It is also proposed that two students or two projects which are rated best be given merit, certificate at the time of annual day of the institute. It would be better if specific nearby, industries are approached for instituting such awards., , The teachers are free to evolve other criteria of assessment, depending upon the type of project, work., It is proposed that the institute may organize an annual exhibition of the project work done by, the students and invite leading Industrial organisations in such an exhibition., , 174

Page 181 :
175, , 10., , RESOURCE REQUIREMENT, , 10.1, , PHYSICAL RESOURCES, , (A), , Space requirement, Norms and standards laid down by All India Council for Technical Education (AICTE), are to be followed to work out space requirement in respect of class rooms, tutorial, rooms, drawing halls, laboratories, space required for faculty, student amenities and, residential area for staff and students., , (B), , Equipment requirement:, , Following Laboratories/Shops are required for Diploma Programme in Electronics Engineering:, - Communication Skills Lab, -, , Applied Physics Lab, , -, , Applied Chemistry Lab, , -, , Engineering Drawing, , -, , Electrical Engineering Lab, , -, , Basics of IT Lab/Computer Lab, , -, , Carpentry Shop, , -, , Painting and Polishing Shop, , -, , Fitting and Plumbing Shop, , -, , Sheet Metal Shop, , -, , Welding Shop, , -, , Electronic Lab, , -, , Digital Electronic and Microprocessor, , -, , Communication Lab, , -, , Instrumentation and Control Lab, , -, , Computer Lab, , -, , Electrical Engineering Lab, , -, , Environmental Engineering Lab , Energy Conservation Lab, , Note:, Some of the laboratories can be clubbed by keeping in mind best utilisation of space and, equipment, the above mentioned laboratories after clubbing reduce to 10 laboratories which are given, below:, , 175

Page 182 :
176, , EQUIPMENT REQUIRED FOR ELECTRONICS ENGINEERING, Description, Sr., No., COMMUNICATIONSKILLS LABORATORY, 1., Stools, 2., Display Board/Screen, 3., Sound recording and playing system, 4., Audio cassettes, 5., Overhead Projector, 6., Transparencies slides, 7., TV, VCR and camera for video recording, 8., English spoken course, 9., A Quiz room equipped with two way audio system, back projection, system and slide projector, 10., Miscellaneous, APPLIED PHYSICS LABORATORY, 1., Vernier calipers, Working length 160 mm, Internal and external dia with locking, arrangement, 2., Screw Gauges, Working length 15 mm, pitch 0.5 mm, least count .005 mm, 3., Spherometers, Distance between legs 2.5 mm, pitch 0.5 mm, least count .005 mm., 4., Mirrors (convex, concave), 5., Pendulum Setup, 6., Gravesand’s Apparatus, 7., Inclined Plane Setup, 8., Flywheel Setup, 9., Prism, , Qty, , Total Price, (Rs), , 40, 2, 1, 60, 1, 100, 1 each, 1, 1, , 10,000, 6,000, 6,000, 2,000, 5,000, 500, 20,000, 2,000, 30,000, , LS, , 1,500, , 12, , 2,000, , 12, , 2,000, , 12, , 2,000, , 5 Each, 02, 02, 02, 02, 05, , 1,500, 4,000, 3,000, 2,000, 4,000, 1,500, , 10., Sr., No., 11., , Spectrometer, Description, , 02, Qty, , DC Ammeters, Moving coil weston-type ammeter with ebonite stand, , 10, , 25,000, Total Price, (Rs), 3,500, , 12., 13., 14., 15., 16., 17, 18., , DC Miliammeters, DC Microammeters, DC voltmeters, DC Millivoltmeters, Sensitivity Galvanometer, Student Galvanometers, Demonstration type DC Ammeters, Range; 0 to 1 Amp., D type DC Voltmeter, Range : 0 to 1 Volt, D type Galvanometers, Sensitivity : 20 microamperes per scale division,, Resistance boxes (dial type) assorted, Rheostats, Miscellaneous items (Spring, Pan, Glycerine, Optic fibre,, Ferromagnetic material), Fortin’s Barometer (Wall type), , 2, 2, 10, 10, 2, 10, 2, , 1,000, 700, 700, 2,000, 800, 4,000, 1,000, , 2, , 1,000, , 8, , 8,000, , 8, 10, LS, , 8,000, 4.000, 2,000, , 2, , 20,000, , 19., 20., 21., 22., 23., 24., , 176

Page 183 :
177, , 25., Stoke’s Apparatus, 26., Gumther’s Apparatus, 27., Resonance Tube Apparatus with accessories and Tuning fork set, 28., Sodium Lamp setup with Biprism, 29., Ohmic resistance coil, 30., Slide wire bridge, 31., PN Junction diode Apparatus, 32., Laser (as per requirement), 33., Numerical aperture setup, 34., Miscellaneous, Description, Sr., No., APPLIED CHEMISTRY LABORATORY, Digital Balance, Burette 50ml, Pipette 25ml, Beakers 100ml, Burette stand, Glazed tile, Conical flask 50ml (Titration flask), Standard (Measuring) flask (to prepare standard solution), 250ml/100ml, , 2, 2, 2, 2, 10, 2, 2, 1, 1, LS, Qty, , 10,000, 16,000, 14,000, 10,000, 5,00, 8,000, 10,000, 1,00,000, 25,000, 3,000, Total Price, (Rs), , 1, 30, 60, 60, 30, 30, 60, 30, , 80,000, 3,000, 4,000, 4,000, 30,000, 1,000, 4,000, 6,000, , Able’s Flash Point apparatus, , 2, , 10,000, , (1/10)°C thermometer, Candles, , 06, 20, , 6,000, 100, , Crucible with lid, Muffle furnace, Decicators, Pair of tongue (small and big), , 06, 1, 06, 24 (small), 2 (big), , 2,000, 18,000, 8,000, 2,000, , LS, , 20,000, , Chemicals, EDTA-1 kg, Eriochrome Black-T(solochrome black T)-200g, Buffer solution (NH3 - 2.5 ltr, NH4Cl – 1 kg), Zinc sulphate- 500g, H2SO4- 2.5 ltr, Phenolphthalein indicator (as per requirement), Methyl orange indicator (as per requirement), Charcoal (as per requirement), Kerosene- 1 ltr, , Miscellaneous, , LS, , Description, Sr., No., ENGINEERING DRAWING, , Qty, , 2,000, Total Price, (Rs), , 177

Page 184 :
178, , 1., Drawing Boards (700 x 500mm), 2., Draughtsman Tables, 3., Draughtsman Stools, 4., Computer Aided Drawing (CAD) Software, 5., Model of different wooder joints, 6., Model of different screw threads, 7., Model of various locking devices, 8., Model of various joints, 9., Cut section Model of various couplings, 10., Miscellaneous, ELECTRICAL ENGINEERING LABORTORY, 1., Voltmeter, 2., Ammeter, 3., CRO, 4., Wattmeter, 5., Multimeter, 6., Resistive load, 7., Regulated supply, 8., Signal generator, 9., Rheostat, 10., Lead acid battery, 11., Cables, Coils, Lamp (as per requirements), , 60, 60, 60, 30 User, 1, 1, 1, 1, 1, LS, , 25,000, 1,80,000, 40,000, 5,00,000, 1,000, 1,000, 1,000, 1,000, 3,000, 5,000, , 5, 5, 1, 5, 1, 1, 1, 1, 2, 1, LS, , 7,500, 10,000, 15,000, 10,000, 4,000, 4,000, 8,000, 5,000, 2,500, 4,000, 1,500, , 12., , Resistance, Inductor, Capacitor (as per requirements), , LS, , 1,500, , 13., , Miscellaneous, , LS, , Description, Sr., No., BASICS OF IT LABORATORY/COMPUTER LABORATORY, 1., Computer System with latest configuration, 2, Printer (MFP), 3, Printer (Laser), 4., Plotter, 5., Digitiser, 6., Antivirus Software, 7., Internet Facility on Computers, 8., LCD Projector, 9., UPS, 10., Software (latest windows, latest MS Office), 11., Scanner, 12., Miscellaneous, CARPENTRY SHOP, 1, Work benches fitted with carpenter vices, 2., Circular saw grinder, 3., Wood cutting band saw-vertical, 4., Bench grinder, 5., Drilling machine, 6., Wood turning lathe, 7., Wood Planner, , 1,500, , Qty, , Total Price, (Rs), , 30, 1, 1, 1, 1, LS, LS, 1, 60, 1, 1, LS, , 8,00,000, 25,000, 35,000, 75,000, 50,000, 10,000, 2,00,000, 35,000, 1,20,000, 1,00,000, 10,000, 5,000, , 5, 1, 1, 1, 1, 1, 1, , 20,000, 6,000, 10,000, 5,000, 8,000, 40,000, 20,000, , 178

Page 185 :
179, , 8., 9., 10., , Tool accessories measuring and marking Instruments, Band saw blade brazing unit, Miscellaneous, , 25, 1, LS, , 25,000, 10,000, 1,500, , Description, Sr., No., PAINTING AND POLISHING SHOP, 1., Spray gun with hose pipe, 2., Paint brushes, 3., Paint/Varnish, 4., Air Compressor with 2 hp motor, 5., Miscellaneous, FITTING AND PLUMBING SHOP, 1., Work benches with vices (4 vices on each bench), , Qty, , Total Price, (Rs), , 5, , 30,000, , 2., 3., 4., , Marking tables with scribers, Surface plates, Accessories like calipers, V blocks, height, gauges steel rules and, scribers, 5., Tool kits – taps, dies, drills, 6., Tool kits – chiesels, hammers, files, hacksaw, 7., Drilling machine, 8., Pipe vice, 9., Chain wrenches, 10., Ring spanner set, 11., Pipe die set 2”, 12., Pipe bending device, 13., Various plumbing fittings, 14., Miscellaneous, SHEET METAL SHOP, 1., Hammers, 2., Mallets (Hard & Soft), 3., Sheet and wire Ganges, 4., Shearing Machine, , 4, 5, 25, , 24,000, 20,000, 50,000, , 25, 25, 2, 4, 5, 5, 2 set, 1, LS, LS, , 40,000, 25,000, 12,000, 1,000, 1,250, 600, 1,000, 5,000, 2,000, 1,500, , 8, 5, LS, 1, , 3,000, 2,000, 8,00, 20,000, , Description, Sr., No., 5., Bar folding Machine, 6., Burring machine, 7., Various sheet (black plain, galvanized iron, corrugated, Aluminium), 8., Hand Shears/Snippers, 9., Nuts, Bolts, Rivets, Screw, 10., Miscellaneous, WELDING SHOP, 1., Electrical welding transformer set with accessories, 2., Gas Cutting Unit, 3., Work benches with vices, 4., Welding generator set, 5., Oxy acetylene welding set with accessories, 6., Acetylene generating set, 7., Electric welder tool kit, 8., Projection welding machine, 9., Brazing equipment with accessories, , Qty, 1, 1, 1 Each, 4, LS, LS, , Total Price, (Rs), 20,000, 10,000, 1,000, 2,000, 5,00, 1,000, , 3, 1, 3, 1, 1, 1, 10, 1, 1, , 30,000, 3,000, 5,000, 10,000, 7,000, 6,000, 10,000, 15,000, 10,000, , 1, 20, LS, 1 set, LS, , 1,000, 2,000, 2,000, 10,000, 2,000, , 179

Page 186 :
180, , 10., 11., 12., 13., 14., 15., 16., , Soldering irons, Pedestal grinder, Metal spraying gun, Spot welder, TIG welding set, MIG welding set, Welding Partition Screen, , 3, 1, 1, 1, 1, 1, 5, , 17., , Miscellaneous, , LS, , Sr., No., , Detail of Instrument, , 1,000, 10,000, 10,000, 25,000, 1,00,000, 1,00,000, 2,500, 3,000, Qty., , Approximate, Cost (in Rs), Per Unit, , ELECTRONICS LABORATORY, 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., 16., 17., 18., 19., 20., 21., 22., 23., 24., 25., 26., , DC regulated low voltage variable power supply, DC regulated multiple output power supply, Audio oscillator, Wide band RC Oscillator, RF Signal Generator, Pulse Generator, Function Generator, Single trace CRO with accessories, Dual trace CRO with accessories, Electronic Multimeter DC and AC with different ranges, Electronics digital Multimeter three and a half digit, Digital LCR- Q meter, Transistor tester type 911, Audio output power meter, Mains Voltage stabilizer(3 KVA), AC Millivoltmeters, DC Millivoltmeters, Voltmeter, DC Ammeter, Battery of different voltage and Ampere hour, Single Phase variac, Rheostat of different wattage and resistance, Servo stabilizer power supply, IC Bread Boards, Distortion factor meter, Decade resistance, capacitance and inductance (four each), , 10,, 4, 4, 4, 2, 2, 4, 4, 4, 8, 8, 2, 1, 2, 1, 4, 2, 5, 5, 2, 3, 5, 1, 20, 1, 12, , 25,000, 12,000, 16,000, 10,000, 8,000, 10,000, 20,000, 60,000, 1,00,000, 30,000, 25,000, 20,000, 5,000, 6,000, 10,000, 16,000, 6,000, 3,000, 3,000, 3,000, 6,000, 3,000, 8,000, 10,000, 10,000, 12,000, , Sr., No., , Detail of Instrument, , Qty., , 27., , Transducers: Pressure type, thermocouple, LVDT, opto Pick-up,, electromagnetic pick-up, ultrasonic pick-up and potentiometer etc, Thyristor control experimental kits Instrumentation/Transducer, experimental kit. Basic electronic experiment kit, Digital Panel meters, , LS, , Approximate, Cost (in Rs), Per Unit, 30,000, , LS, , 2,50,000, , 6, , 3,000, , 28., 29., , 180

Page 187 :
181, , 30., 31., 32, 33., 34, 35, 36, 37, 38, 39, 40, 41, , 42, 43., 44., 45, 46, 47, 48, Sr., No., 49, , Digital thermometer, Stroboscope cum motor drive disc, Digital load indicator with load Cells, Digital Lux meter, CROs 20 MHz (Scientific Make), Function Generators Audio Frequency, Regulated Power Supply, Multimeter (Digital), Rectifier Kits, Filter Circuit Kit, Bread Boards, Transistor Kits, CB, CE, FETs, Operational Amplifier Kits, Raw Materials, Kit for clamping Circuits, Kit for clipping Circuits, Kit for Monostable MV, Kit for Astable MV (555), Detail of Instrument, , Kit for i) Hackling Oscillator, ii) Cal pelt Oscillator, iii) Weir Bridge Oscillator, iv) RC Phase shift Oscillator, v) Crystal Oscillator, 50, Kit to plot V-I characteristics of, i) P-N Junction Diode, ii) Zenor Diode, iii) BJT, iv) FET, 51, Kit for CB, CE, CC Configurations, COMMUNICATION ENGINEERING LABORATORY( Basic), 1., DC regulated low voltage variable Power Supply, 2., RF Signal Generator, 3., Electronic Multimeter with different voltage ranges, 4., Electronic Digital Multimeter, 5., Standard Signal Generator, 6., Facsimile(Fax)-transmitter receiver, 7., Radio Receiver Trainer Kits/Deconstruction Models, 8., AM/FM signal generator, 9., Super heterodyne Receiver radio Demonstration model, 10., Communication receiver, 11., Optical fibre bench, CRO 25 MHz, Digital frequency meter, 50 MHz CRO/DSO, Modems, opto coupler different types of microphones and other, accessories, Advanced Communication Trainer, Detail of Instrument, Sr., , 1, 1, 1, 1, 6 Nos., 6 Nos., 6 Nos., 10 Nos., 6 Nos., 6 Nos., 12 Nos., , 4,000, 10,000, 10,000, 8,000, 22,000, 7,500, 3,600, 2,000, 2,200, 2,200, 2,800, , 6 Nos., 6 Nos., 6 Nos., 6 Nos., LS, 05, 05, 05, 05, Qty., , 2,400, 2,400, 2,400, 3,000, 20,000, , Approximate, Cost (in Rs), Per Unit, , 5, each, , 05, , 05, 6, 3, 6, 6, 2, 1, 2, 2, 1, 1, 2, 3, 2, 3, LS, , 12,000, 15,000, 22,000, 20,000, 50,000, 20,000, 10,000, 20,000, 4,000, 5,000, 25,000, 80,000, 10,000, 50,000, 10,000, , 2, Qty., , 1,00,000, Approximate, , 181

Page 188 :
182, , No., Cellular Mobile Kit, Pulse Modulation and Demodulation, Pulse Amplitude Modulation and Demodulation, Pulse Width Modulation and Demodulation, Data Formatting and Carrier Modulation Transistor Trainer Model, Carrier Demodulation of Data Reformatting Receiver Trainer Kit, AM Transmitter Trainer Model, AM Receiver Trainer Model, FM Communication Trainer Model, Sampling Reconstruction Trainer, Pulse Code Modulation Transmitter, Pulse Code Modulation Receiver, Delta Adaptive Delta Sigma Modulation and Demodulation Trainer, Antenna Trainer to plot the radiation pattern of different types of, Antenna, COMMUNICATION SYSTEM LABORATORY – II (Advanced), 1., Kit - IF Amplifier Transistor based, 2., Kit – Amplitude Modulation Demodulation (DSB), 3., Kit – Double Balanced Modulator/Demodulator, 4., Kit – Frequency Modulator Demodulator (Transistorized), 5., Kit – Computer and locking range of PLL, 6., Kit – Frequency Demodulation (IC Based), 7., Kit –Sample and Hold (S/H) function for Digital Study, 8., IF Amplifer (IC Based), 9., Frequency Synthesizer, 10, Kit to measure characteristic impedance of symmetrical T & π, Network., Sr., No., , Detail of Instrument, , 11, Kit to measure Image Impedance of Asymmetrical T & π Network., 12, Kit to Plot the attenuation characteristic, 13, Kit for LPF, HPF, BPF, 14, Kit for measurement of SWR of Line, 15, Kit for Plotting attenuation characteristics of crystal filter, ELECTRONIC DESIGN AND SIMULATION TECHNIQUES, 1., Computers, 2., Softwares:- DIP Trace /ORCAD/LAB VIEW/WIN SPICE etc., TELEVISION / AUDIO-VIDEO LABORATORY, DC regulated low voltage variable power supply, DC regulated low voltage variable power supply, Audio signal generator, RF Oscillator, Electronic multimeter Analog, Electronic digital multimeter, AF output power meter, Signal tracer, Signal Injector, Colour TV training model, , 2, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 02, , Cost (in Rs), Per Unit, 10,000, 20,000, 18,000, 18,000, 25,000, 25,000, 20,000, 20,000, 25,000, 11,000, 25,000, 25,000, 30,000, , 6 Nos., 6 Nos., 6 Nos., 6 Nos., 6 Nos., 6 Nos., 6 Nos., 6 Nos., 6 Nos., 5 Nos, , 1,500, 2,500, 4,500, 2,200, 1,600, 1,600, 2,600, 1,600, 1,600, , Qty., , Approximate, Cost (in Rs), Per Unit, , 5 Nos, 5 each, 2 Nos, 5 Nos., 20, , 3, , 10,500, , 1, 4, 4, 6, 4, 2, 2, 2, 2, , 6,000, 16,000, 20,000, 22,000, 12,000, 6,000, 3,000, 500, 80,000, , 182

Page 189 :
183, , Sr., No., , CCTV System PAL Based, Field Strength meter, Satellite Receiver, Mixer Amplifier, , 1 set, 1, 2, , 40,000, 5,000, 10,000, , TV receiving antenna-Yagi,Uda turnstile, Dish Antenna with LNB, RF power meter, Cassette tape recorder Trainer, , 2 each, 1, 1, 1, , 1,000, 10,000, 7,000, 10,000, , Detail of Instrument, , Qty., , 1, 2, 4, 2, 1, 1, 3, 2, 2, 1, 2 Nos., 2 Nos., 5 Nos., 2Nos., , Approximate, Cost (in Rs), Per Unit, 10,000, 5,000, 6,000, 2,000, 12,000, 5,000, 90,000, 25,000, 5,000, 1,00,000, 13,000, 33,000, 34,000, 8,000, , 5, 5,, 1, 2, 2 set, 1 set, 1, 1, 1, 1, 1, 1, 2, , 5,000, 5,000, 3,000, 2,500, 50,000, 15,000, 10,000, 20,000, 5,000, 15,000, 6,000, 6,000, 12,000, Approximate, Cost (in Rs), Per Unit, 6,000, 8,000, 10,000, 12,000, 25,000, 3,500, 3,000, 10,500, 500, , Compact Disc player system Trainer, PA system with microphone, Microphone, Loud Speaker, Audio Test System, Digital Frequency Counter, CRO Dual Trace, RF Sweep Generator for TV Alignment, Pattern generator, Video Projector System, TV Trainer Kit (B/W), TV Trainer Kit (Colour), Digital Storage Oscilloscope, Pattern Generators Colour, ELECTRONICS WORKSHOP, 1., Hand Tools Set, 2., Soldering Set`, 3., Hand Drill, 4., PCB Etching Machine, 5., Silk Screen Printing, 6., Drafting Equipment, 7., PCB Drilling Machine, 8., Sheet metal folding and binding machine, 9., Sheet metal cutting machine, 10., Centre Lathe, 11., Grinder, 12., Circular saw, 13., DC regulated low voltage variable power supply, Sr., No., , Detail of Instrument, , Qty., , 14., 15., 16., 17., 18., 19., 20., 21., 22., , Audio Oscillator, RF Signal generator, Digital LCR-Q meter, Digital multi-meter, Dual trace/DSo, AC Milivoltmeter, IC Bread boards, Soldering stations temperature controlled, Solder suckers with accessories, , 2, 2, 2, 4, 4, 2, 6, 0, 10, , 183

Page 190 :
184, , 23, Digital IC Tester, DIGITAL ELECTRONICS AND MICROPROCESSORS LABORATORY, ., 1., DC regulated low voltage variable power supply, 2., DC regulated multiple output power supply, 3., Digital IC power supply, 4., Electronic Digital Multimeter, 5., CRO Dual trace, 25 MHz, 6., Digital frequency meter/universal Counter timer, 7., Pulse Generator, 8., Logic probes (TTL and CMOS), 9., Digital logic trainer (TTL), 10., Logic Trainer Boards, 11., Microprocessor trainer Kits 8085, 12., Microprocessor Trainer Kits 8086, 13., Computer Trainer, 14., Interfacing Cards, 15., Micro-controller Kit 8051 based, 16., Digital IC Tester, 17, Universal Programmer, , Sr., No., , Detail of Instrument, , 18, Digital Multimeter, 19., EPROM Programme, 20., EPROM Eraser, 21, Additional cards, 22, Ink jet Printers, 23., Laser Printers, 24, Scanners, 25, Copier, 26, Scanner cum Copier cum Printer, Fax, MEASUREMENT LABORATORY, 1., Light Measurement (Photocells) Kit, 2., LVDT Kit, 3., Pressure Measurement Kit, 4., Strain Measurement Kit, 5., Water Level Measurement Kit, 6., RPM Measurement Kit, 7., Temperature Measurement Kit, 8., Maxwell’s Bridge Kit, 9., Wein’s Bridge Kit, 10., Anderson Bridge Kit, 11., Flux Meter (Digital) Kit, 12., Q. Meter (Digital) Kit, 13, pH meter kit, 14, Wheat stone bridge kit, ELECTRICAL MACHINE LABORATORY, 1., Ammeter, Voltmeter, Wattmeter and, Energy Meters (3- phase and 1- phase), , 02, , 5000, , 6, 3, 8, 6, 4, 2, 2, 10, 4, 10, 10, 2, 1, 5, 10, 1 No., 2No., , 15,000, 9,000, 10,000, 9,000, 1,00,000, 20,000, 10,000, 2,500, 20,000, 10,000, 50,000, 60,000, 30,000, 2,50,000, 1,00,000, 50,000, 7,000, , Qty., , Approximate, Cost (in Rs), Per Unit, 60,000, 10,000, 1,500, 50,000, 6,000, 12000, 5000, 3000, 4500, , 10 No., 2, 2, LS, 2, 2, 2, 1, 1, 4 Nos., 4 Nos., 4 Nos., 4 Nos., 4Nos., 4Nos., 4Nos., 4Nos., 4 Nos., 4 Nos., 4 Nos., 4 Nos., 4 Nos., 4 Nos., , 15,000, 8,000, 9,500, 14,000, 11,500, 5,000, 5,000, 7,500, 4,500, 5,000, 5,000, 5,000, , 8 each, , 40,000, , 184

Page 191 :
185, , 2., , 3-Phase Resistive load, , 4 Nos., , 16,000, , Sr., No., , Detail of Instrument, , Qty., , Approximate, Cost (in Rs), Per Unit, 5,000, 12,000, 16,000, 10,000, 20,000, 10,000, 10,000, 25,000, 25,000, 25,000, 6,000, 8,000, 12,000, 15,000, 5,000, 10,000, 32,000, 10,000, , 3., LCR/Q Bridge, 4., Tong tester, 5., Transformer (single phase), 6., Watt meter, Volt meter, Ammeter,, 7., DC Shunt Motor,2 hp with loading arrangement, 8., Induction Motor (Single phase), 9., Induction Motor (Three phase), 10., Slipring Induction Motor 3 HP with loading facility, 11., Alternator and Load for Alternators, 12., DC generator with prime-mover motor, 13., DC Regulated Power Supply, 14., Starters (DOL and Star Delta), 15., Rheostats, 16., Tacho meters (digital), 17., Maggar (Insulation Tester), 18., Earth Tester, 19., Digital Multi-meter, 20., Rectifier, Inverter Set, POER ELECTRONICS LABORATORY, ( Electronics), 1., Chopper Kit, 2., Series Inverter, 3., Parallel Inverter, 4., Speed Control of dc motor (Thyristorized), 5., Single Phase Cyclo Convertor with Thyristors, 6., SCR Characteristics, 7., Gate Triggering Characteristics of SCR, 8, AC Phase Control Trainer Kit, 9., Kit to Study 3-phase Control Bridge Convertor, , Sr., No., , Detail of Instrument, , 10., UJT Characteristics and its Application as Relaxation Oscillator, 11, Kit for Plotting VI characteristics of SCR, 12, Kit for Plotting VI characteristics of TRIAL, 13, Kit for Plotting VI characteristics of DIAL, 14, Kit for Plotting VI characteristics of UJT, 15, Kit of UJT Based Relaxation Oscillator, 16, Kit for Single Phase half wave controlled Rectifier, 17, Kit for single phase full wave controlled Rectifier, 18, Kit for Triac Based AC Phase control, 19, Demonstration Kit of Off-line and On-line UPS, MEDICAL ELECTRONICS, , 1, 4, 2, 2 each, 1, 2, 2, 1, 1, 2, 2, 2 each, 4, 2, 2, 2, 10, 1, , 6 Nos., 2 Nos., 2 Nos., 6 Nos., 2 Nos., 6 Nos., 6 Nos., 6 Nos., 6 Nos., , 5,000, 8,000, 8,000, 5,000, 20,000, 1,500, 10,000, 6,000, 17,500, , Qty., , Approxima, te Cost (in, Rs) Per, Unit, 1,500, , 6 Nos., 5, 5, 5, 5, 5, 5, 5, 5, 2 each, , 185

Page 192 :
186, , 1., Medical test bench, CONTROL CIRCUIT LAB, 1., Equipment Required for Control Circuit Lab, Instrumentation and Control Circuit Trainer Equipment Having, hardware and software for checking, Proportional, Integral and Derivative functions, (configurable as, P,I,D, PI, PD,PID) and ON/OFF control, Having Square and triangular wave with variable frequency for testing, PID. Having Variable DC for set point and error detector with inbuilt, power supply and function generator, dead zone and disturbance, generator, , ENVIRONMENT ENGINEERING LABORATORY, pH Meter, Turbidity Meter, Oven with Temperature Controller and Forced Air Circulation Type, B.O.D. Incubator, Water Analysis Kit, High Volume Sampler, Electrical Balance for weighing upto 1/10 of milligram (capacity), ENERGY CONSERVATION LABORATORY, 1, Clamp meter, 2, Multimeter, 3, Power Analyser, 4, Different types of lamps (LS), 60 W lamp, 230 V , 100 V, 200 W lamp, 500 W lamp, 100 W lamp, 110 V, 150 V, 5, Lux meter, 6, Centrifugal pump, 1 kW, 7, Standard window A.C., 8, Anemometer, 9, Thermometer, 10, Flow meter, 11, Pumping set with at least two pumps of different capacity., 12, Pressure gauge fitted on discharge lines, 13, Variable Frequency Drive, 14, A small compressor with a small network of pipe line fitted with, suitable pipeline, pressure gauge, safety valve and loading /, unloading pressure switch., 15, Stop watch, 16, Small blower (1.5 kW motor) with inlet and outlet ducts of, approximately one meter length on both sides, 17, Black Box (for checking lamp efficacy including stand and, luxmeter), , LS, , 1,00,000, , 2 Sets, , 60,000/-, , 01, 01, 01, 01, 01, 01, 01, , 500, 5000, 20000, 25000, 5000, 40000, 1000, , 02, 02, 01, , 5000, 2000, 20000, , 10, , 500, , 02, 1, 01, 02, 03, 02, 1 set, 1 set, 02, , 5000, 15,000, 20000, 5000, 2000, 10000, 10000, 2000, 50000, , 1, , 3000, , 2, , 1000, , 1, , 10000, , 1, , 25000, , NOTE:, , 186

Page 193 :
187, , In addition to the above, laboratories in respect of physics, chemistry, Computer Centre etc will be required for, effective implementation of the course. Provision for photocopiers, PC facilities along with LCD Projection System, etc. has also to be made., (C), , Furniture Requirement, , Norms and standards laid down by AICTE be followed for working out furniture requirement for this course., 10.2, , Human Resources Development:, , Weekly work schedule, annual work schedule, student teacher ratio for various group and class size, staffing pattern,, work load norms, qualifications, experience and job description of teaching staff workshop staff and other, administrative and supporting staff be worked out as per norms and standards laid down by the AICTE., , 187

Page 194 :
188, , 11., , EVALUATION STRATEGY, , 11.1, , INTRODUCTION, , Evaluation plays an important role in the teaching-learning process. The major objective of any teachinglearning endeavor is to ensure the quality of the product which can be assessed through learner’s evaluation., , The purpose of student evaluation is to determine the extent to which the general and the, specific objectives of curriculum have been achieved. Student evaluation is also, important from the point of view of ascertaining the quality of instructional processes and, to get feedback for curriculum improvement. It helps the teachers in determining the, level of appropriateness of teaching experiences provided to learners to meet their, individual and professional needs. Evaluation also helps in diagnosing learning, difficulties of the students. Evaluation is of two types: Formative and Summative, (Internal and External Evaluation), , Formative Evaluation, It is an on-going evaluation process. Its purpose is to provide continuous and comprehensive, feedback to students and teachers concerning teaching-learning process. It provides, corrective steps to be taken to account for curricular as well as co-curricular aspects., , Summative Evaluation, It is carried out at the end of a unit of instruction like topic, subject, semester or year., The main purpose of summative evaluation is to measure achievement for assigning, course grades, certification of students and ascertaining accountability of instructional, process. The student evaluation has to be done in a comprehensive and systematic, manner since any mistake or lacuna is likely to affect the future of students., In the present educational scenario in India, where summative evaluation plays an, important role in educational process, there is a need to improve the standard of, summative evaluation with a view to bring validity and reliability in the end-term, examination system for achieving objectivity and efficiency in evaluation., 11.2, , STUDENTS’ EVALUATION AREAS, The student evaluation is carried out for the following areas:, -, , Theory, Practical Work (Laboratory, Workshop, Field Exercises), 188

Page 195 :
189, , A., , Project Work, Professional Industrial Training, Theory, Evaluation in theory aims at assessing students’ understanding of concepts,, principles and procedures related to a course/subject, and their ability to apply, learnt principles and solve problems. The formative evaluation for theory subjects, may be caused through sessional /class-tests, home-assignments, tutorial-work,, seminars, and group discussions etc. For end-term evaluation of theory, the, question paper may comprise of three sections., , Section-I, It should contain objective type items e.g. multiple choice, matching and completion type., Total weightage to Section-1 should be of the order of 20 percent of the total marks and no, choice should be given in this section. The objective type items should be used to evaluate, students’ performance in knowledge, comprehension and at the most application domains, only., Section-II, It should contain short answer/completion items. The weightage to this section, should be of the order of 40 percent of the total marks. Again, no choice should, be given in section-II, , Section-III, It may contain two to three essay type questions. Total weightage to this section, should be of the order of 40 percent of the total marks. Some built-in, internal, choice of about 50 percent of the questions set, can be given in this section, Table II : Suggested Weightage to be given to different ability levels, , Abilities, Knowledge, Comprehension, Application, Higher than application i.e. Analysis,, Synthesis and Evaluation, , B., , Weightage to be assigned, 10-30 percent, 40-60 percent, 20-30 percent, Upto 10 percent, , Practical Work, , 189

Page 196 :
190, , Evaluation of students performance in practical work (Laboratory experiments,, Workshop practicals/field exercises) aims at assessing students ability to apply or, practice learnt concepts, principles and procedures, manipulative skills, ability to, observe and record, ability to interpret and draw conclusions and work related, attitudes. Formative and summative evaluation may comprise of weightages to, performance on task, quality of product, general behaviour and it should be, followed by viva-voce., C., , Project Work, The purpose of evaluation of project work is to assess students ability to apply, in, an integrated manner, learnt knowledge and skills in solving real life problems,, manipulative skills, ability to observe, record, creativity and communication, skills. The formative and summative evaluation may comprise of weightage to, nature of project, quality of product, quality of report and quality of presentation, followed by viva-voce., , D., , Professional Industrial Training, Evaluation of professional industrial training report and viva-voce/ presentation, aims at assessing students’ understanding of materials, industrial processes,, practices in the industry/field and their ability to engage in activities related to, problem-solving in industrial setting as well as understanding of application of, learnt knowledge and skills in real life situation. The formative and summative, evaluation may comprise of weightages to performance in testing, general, behaviour, quality of report and presentation during viva-voce., , 190

Page 197 :
191, , 12., , RECOMMENDATIONS FOR EFFECTIVE CURRICULUM, IMPLEMENTATION, , This curriculum document is a Plan of Action and has been prepared based on exhaustive, exercise of curriculum planning and design. The representative sample comprising selected, senior personnel (lecturers and HODs) from various institutions and experts from industry/field, have been involved in curriculum design process., The document so prepared is now ready for its implementation. It is the faculty of polytechnics, who have to play a vital role in planning instructional experiences for the courses in four, different environments viz. class-room, laboratory, library and field and execute them in right, perspective. It is emphasized that a proper mix of different teaching methods in all these places, of instruction only can bring the changes in stipulated students behaviour as in the curriculum, document. It is important for the teachers to understand curriculum document holistically and, further be aware of intricacies of teaching-learning process (T-L) for achieving curriculum, objectives. Given below are certain suggestions which may help the teachers in planning and, designing learning experiences effectively. These are indicative in nature and teachers using, their creativity can further develop/refine them. The designers of the programme suggest every, teacher to read them carefully, comprehend and start using them., (A), , Broad Suggestions:, , 1., , Curriculum implementation takes place at programme, course and class-room level, respectively and synchronization among them is required for its success. The first step, towards achieving synchronization is to read curriculum document holistically, and understand its rationale and philosophy., , 2., , An academic plan needs to be prepared and made available to all polytechnics well in, advance. The Principals have a great role to play in its dissemination and, percolation, upto grass-root level. Polytechnics, in turn are supposed to prepare institutional academic, plan., , 3., , HOD of every Programme Department along with HODs and incharges of other, departments are required to prepare academic plan at department level referring to, institutional academic plan., , 4., All lecturers/Senior lecturers are required to prepare course level and class level lesson, plans referring departmental academic plan., , (B), , Course Level Suggestions, , 191

Page 198 :
192, , Teachers are educational managers at class room level and their success in achieving, course level objectives lies in using course plan and their judicious execution which is, very important for the success of programme by achieving its objectives., Polytechnic teachers are required to plan various instructional experiences viz. theory, lecture, expert lectures, lab/workshop practicals, guided library exercises, field visits,, study tours, camps etc. In addition, they have to carry out progressive assessment of, theory, assignments, library, practicals and field experiences. Teachers are also required, to do all these activities within a stipulated period of time. It is essential for them to use, the given time judiciously by planning all above activities properly and ensure execution, of the plan effectively., Following is the gist of suggestions for subject teachers to carry out T-L process, effectively:, 1., , Teachers are required to prepare a course plan, taking into account departmental, academic plan, number of weeks available and courses to be taught., , 2., , Teachers are required to prepare lesson plan for every theory class. This plan may, comprise of contents to be covered, learning material for execution of a lesson plan., They may follow steps for preparing lesson plan e.g. drawing attention, state instructional, objectives, help in recalling pre-requisite knowledge, deliver planned subject content,, check desired learning outcomes and reinforce learning etc., , 3., , Teachers are required to plan for expert lectures from field/industry. Necessary steps are, to plan in advance, identify field experts, make correspondence to invite them, take, necessary budgetary approval etc., , 4., , Teachers are required to plan for guided library exercises by identification of course, specific experience requirement, setting time, assessment, etc. The assignments and, seminars can be thought of as terminal outcome of library experiences., , 5., , Concept and content based field visits may be planned and executed for such content of, course which is abstract in nature and no other requisite resources are readily available in, institute to impart them effectively., , 6., , There is a dire need for planning practical experiences in right perspective. These slots in, a course are the avenues to use problem based learning/activity learning/ experiential, learning approach effectively. The development of lab instruction sheets for the course is, a good beginning to provide lab experiences effectively., , 7., , Planning of progressive assessment encompasses periodical assessment in a, semester, preparation of proper quality question paper, assessment of answer, sheets, immediately and giving constructive feed back to every student, , 192

Page 199 :
193, , 8., , The student centred activities may be used to develop generic skills, management, problem solving, managing self, collaborating with others etc., , 9., Where ever possible, it is essential to use activity based learning rather than, on delivery based conventional teaching all the time., , like, , task, , relying, , 10., , Teachers may take initiative in establishing liaison with industries and field, organizations for imparting field experiences to their students., , 11., , Students be made aware about issues related to ecology and environment, safety, concern, for wastage of energy and other resources etc., , 12., , Students may be given relevant and well thought out project assignments, which are, purposeful and develop practical skills. This will help students in developing creativity, and confidence for their gainful employment., , 13., , A Project bank may be developed by the concerned department of the polytechnics in, consultation with related Industry, research institutes and other relevant field, organizations in the state., , 193

Page 203 :
197, , 11., , EVALUATION STRATEGY, , 11.1, , INTRODUCTION, , Evaluation plays an important role in the teaching-learning process. The major objective of any teachinglearning endeavor is to ensure the quality of the product which can be assessed through learner’s evaluation., , The purpose of student evaluation is to determine the extent to which the general and the, specific objectives of curriculum have been achieved. Student evaluation is also, important from the point of view of ascertaining the quality of instructional processes and, to get feedback for curriculum improvement. It helps the teachers in determining the, level of appropriateness of teaching experiences provided to learners to meet their, individual and professional needs. Evaluation also helps in diagnosing learning, difficulties of the students. Evaluation is of two types: Formative and Summative, (Internal and External Evaluation), , Formative Evaluation, It is an on-going evaluation process. Its purpose is to provide continuous and comprehensive, feedback to students and teachers concerning teaching-learning process. It provides, corrective steps to be taken to account for curricular as well as co-curricular aspects., Summative Evaluation, It is carried out at the end of a unit of instruction like topic, subject, semester or year., The main purpose of summative evaluation is to measure achievement for assigning, course grades, certification of students and ascertaining accountability of instructional, process. The student evaluation has to be done in a comprehensive and systematic, manner since any mistake or lacuna is likely to affect the future of students., In the present educational scenario in India, where summative evaluation plays an, important role in educational process, there is a need to improve the standard of, 197

Page 204 :
198, , summative evaluation with a view to bring validity and reliability in the end-term, examination system for achieving objectivity and efficiency in evaluation., 11.2, , STUDENTS’ EVALUATION AREAS, The student evaluation is carried out for the following areas:, A., , Theory, Practical Work (Laboratory, Workshop, Field Exercises), Project Work, Professional Industrial Training, Theory, Evaluation in theory aims at assessing students’ understanding of concepts,, principles and procedures related to a course/subject, and their ability to apply, learnt principles and solve problems. The formative evaluation for theory subjects, may be caused through sessional /class-tests, home-assignments, tutorial-work,, seminars, and group discussions etc. For end-term evaluation of theory, the, question paper may comprise of three sections., , Section-I, It should contain objective type items e.g. multiple choice, matching and completion type. Total weightage to Section-1 should be of the, order of 20 percent of the total marks and no choice should be given in this section. The objective type items should be used to evaluate, students’ performance in knowledge, comprehension and at the most application domains only., , Section-II, It should contain short answer/completion items. The weightage to this section, should be of the order of 40 percent of the total marks. Again, no choice should, be given in section-II, , Section-III, It may contain two to three essay type questions. Total weightage to this section, should be of the order of 40 percent of the total marks. Some built-in, internal, choice of about 50 percent of the questions set, can be given in this section, Table II : Suggested Weightage to be given to different ability levels, Abilities, Knowledge, Comprehension, Application, Higher than application i.e. Analysis,, , Weightage to be assigned, 10-30 percent, 40-60 percent, 20-30 percent, Upto 10 percent, 198

Page 205 :
199, , Synthesis and Evaluation, , B., , Practical Work, Evaluation of students performance in practical work (Laboratory experiments,, Workshop practicals/field exercises) aims at assessing students ability to apply or, practice learnt concepts, principles and procedures, manipulative skills, ability to, observe and record, ability to interpret and draw conclusions and work related, attitudes. Formative and summative evaluation may comprise of weightages to, performance on task, quality of product, general behaviour and it should be, followed by viva-voce., , C., , Project Work, The purpose of evaluation of project work is to assess students ability to apply, in, an integrated manner, learnt knowledge and skills in solving real life problems,, manipulative skills, ability to observe, record, creativity and communication, skills. The formative and summative evaluation may comprise of weightage to, nature of project, quality of product, quality of report and quality of presentation, followed by viva-voce., , D., , Professional Industrial Training, Evaluation of professional industrial training report and viva-voce/ presentation, aims at assessing students’ understanding of materials, industrial processes,, practices in the industry/field and their ability to engage in activities related to, problem-solving in industrial setting as well as understanding of application of, learnt knowledge and skills in real life situation. The formative and summative, evaluation may comprise of weightages to performance in testing, general, behaviour, quality of report and presentation during viva-voce., , 199

Page 206 :
200, , 12., , RECOMMENDATIONS FOR EFFECTIVE CURRICULUM, IMPLEMENTATION, , This curriculum document is a Plan of Action and has been prepared based on exhaustive, exercise of curriculum planning and design. The representative sample comprising selected, senior personnel (lecturers and HODs) from various institutions and experts from industry/field, have been involved in curriculum design process., The document so prepared is now ready for its implementation. It is the faculty of polytechnics, who have to play a vital role in planning instructional experiences for the courses in four, different environments viz. class-room, laboratory, library and field and execute them in right, perspective. It is emphasized that a proper mix of different teaching methods in all these places, of instruction only can bring the changes in stipulated students behaviour as in the curriculum, document. It is important for the teachers to understand curriculum document holistically and, further be aware of intricacies of teaching-learning process (T-L) for achieving curriculum, objectives. Given below are certain suggestions which may help the teachers in planning and, designing learning experiences effectively. These are indicative in nature and teachers using, their creativity can further develop/refine them. The designers of the programme suggest every, teacher to read them carefully, comprehend and start using them., (A), , Broad Suggestions:, , 1., , Curriculum implementation takes place at programme, course and class-room level, respectively and synchronization among them is required for its success. The first step, towards achieving synchronization is to read curriculum document holistically, and understand its rationale and philosophy., , 2., , An academic plan needs to be prepared and made available to all polytechnics well in, advance. The Principals have a great role to play in its dissemination and, percolation, upto grass-root level. Polytechnics, in turn are supposed to prepare institutional academic, plan., , 3., , HOD of every Programme Department along with HODs and incharges of other, departments are required to prepare academic plan at department level referring to, institutional academic plan., , 4., All lecturers/Senior lecturers are required to prepare course level and class level lesson, plans referring departmental academic plan., , (B), , Course Level Suggestions, 200

Page 207 :
201, , Teachers are educational managers at class room level and their success in achieving, course level objectives lies in using course plan and their judicious execution which is, very important for the success of programme by achieving its objectives., Polytechnic teachers are required to plan various instructional experiences viz. theory, lecture, expert lectures, lab/workshop practicals, guided library exercises, field visits,, study tours, camps etc. In addition, they have to carry out progressive assessment of, theory, assignments, library, practicals and field experiences. Teachers are also required, to do all these activities within a stipulated period of time. It is essential for them to use, the given time judiciously by planning all above activities properly and ensure execution, of the plan effectively., Following is the gist of suggestions for subject teachers to carry out T-L process, effectively:, 1., , Teachers are required to prepare a course plan, taking into account departmental, academic plan, number of weeks available and courses to be taught., , 2., , Teachers are required to prepare lesson plan for every theory class. This plan may, comprise of contents to be covered, learning material for execution of a lesson plan., They may follow steps for preparing lesson plan e.g. drawing attention, state instructional, objectives, help in recalling pre-requisite knowledge, deliver planned subject content,, check desired learning outcomes and reinforce learning etc., , 3., , Teachers are required to plan for expert lectures from field/industry. Necessary steps are, to plan in advance, identify field experts, make correspondence to invite them, take, necessary budgetary approval etc., , 4., , Teachers are required to plan for guided library exercises by identification of course, specific experience requirement, setting time, assessment, etc. The assignments and, seminars can be thought of as terminal outcome of library experiences., , 5., , Concept and content based field visits may be planned and executed for such content of, course which is abstract in nature and no other requisite resources are readily available in, institute to impart them effectively., , 6., , There is a dire need for planning practical experiences in right perspective. These slots in, a course are the avenues to use problem based learning/activity learning/ experiential, learning approach effectively. The development of lab instruction sheets for the course is, a good beginning to provide lab experiences effectively., , 7., , Planning of progressive assessment encompasses periodical assessment in a, semester, preparation of proper quality question paper, assessment of answer, sheets, immediately and giving constructive feed back to every student, , 201

Page 208 :
202, , 8., , The student centred activities may be used to develop generic skills, management, problem solving, managing self, collaborating with others etc., , 9., Where ever possible, it is essential to use activity based learning rather than, on delivery based conventional teaching all the time., , like, , task, , relying, , 10., , Teachers may take initiative in establishing liaison with industries and field, organizations for imparting field experiences to their students., , 11., , Students be made aware about issues related to ecology and environment, safety, concern, for wastage of energy and other resources etc., , 12., , Students may be given relevant and well thought out project assignments, which are, purposeful and develop practical skills. This will help students in developing creativity, and confidence for their gainful employment., , 13., , A Project bank may be developed by the concerned department of the polytechnics in, consultation with related Industry, research institutes and other relevant field, organizations in the state., , 202

Page 212 :
206, , 10. Dr. AB Gupta, Professor & Head, CDC, NITTTR, Chandigarh, The following experts participated in the workshop for finalizing resource equipment of, diploma course in Electronics Engineering for UP State on 10 th December, 2018 at, NITTTR, Chandigarh:, 1. Sh. Navdeep Singh, Senior Lecturer, Government Polytechnic, Khunimajra, Mohali, 2. Mrs. Garima Saini, Assistant Professor, ECE, NITTTR, Chandigarh., 3. Dr. AB Gupta, Professor & Head, CDC, NITTTR, Chandigarh, , 206