Page 1 :
FIRST YEAR HIGHER SECONDARY EXAMINATION, FOCUS AREA Notes for +1 CHEMISTRY (All Chapters), , 1. SOME BASIC CONCEPTS OF CHEMISTRY, Laws of Chemical Combination, The combination of elements to form compounds is governed by the some basic laws:, 1., Law of Definite Proportions (Law of definite composition): This law was proposed by Joseph, Proust. It states that a given compound always contains exactly the same proportion of elements by weight., Or, the same compound always contains the same elements combined in a fixed ratio by mass., Illustration: Carbon dioxide can be formed in the atmosphere by various methods like respiration, burning of, fuels, reaction of metal carbonates and bicarbonates with acid etc. All these samples of CO 2 contain only two, elements Carbon and Oxygen combined in a mass ratio 3:8., 2., Law of Multiple Proportions: This law was proposed by John Dalton. It states that if two elements, can combine to form more than one compound, the different masses of one of the elements that combine, with a fixed mass of the other element, are in small whole number ratio., Illustration: Hydrogen combines with oxygen to form two compounds – water and hydrogen peroxide., Hydrogen + Oxygen → Water, 2g, 16g, 18g, Hydrogen + Oxygen → Hydrogen Peroxide, 2g, 32g, 34g, Here, the masses of oxygen (i.e. 16 g and 32 g) which combine with a fixed mass of hydrogen (2g) bear a, simple ratio, i.e. 16:32 or 1: 2., Atomic mass, Atomic mass of an element is a number that expresses how many times the mass of an atom of the element, is greater than 1/12th the mass of a C12 atom., For e.g. atomic mass of Nitrogen is 14, which means that mass of one N atom is 14 times greater than 1/12 th, the mass of a C12 atom., Atomic mass unit (amu): 1/12th the mass of a C12 atom is called atomic mass unit (amu)., i.e. 1 amu = 1/12 x mass of a C12 atom, = 1.66 x 10-24 g, = 1.66 x 10-27 kg, Today, ‘amu’ has been replaced by ‘u’ which is known as unified mass., Average atomic mass: Almost all the elements have isotopes. So we can calculate an average atomic mass of, an element by considering the atomic mass of the isotopes and their relative abundance., For e.g. chlorine has two isotopes 35Cl and 37Cl in the ratio 3:1., So the average atomic mass Cl =(3x35 + 1x37)/4 =35.5, Molecular mass:, Molecular mass is the sum of atomic masses of the elements present in a molecule. It is obtained by, multiplying the atomic mass of each element by the number of its atoms and adding them together., For e.g. molecular mass of H2SO4 is calculated as: 2 x 1 + 32 + 4 x 16 = 98 u., Formula mass:, In the case of ionic compounds (like NaCl), there is no discrete (separate) molecules. Here the positive ions, and the negative ions are arranged in a three-dimensional structure. So we can calculate only formula mass, +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 1

Page 2 :
by taking molecular formula of the compound., Mole concept, Mole is the unit of amount of substance. It is defined as the amount of substance that contains as many, particles as there are atoms in exactly 12 g C12 isotope. 1 mole of any substance contains 6.022 x 1023, atoms. This number is known as Avogadro number or Avogadro constant (NA or N0)., 1 mol of hydrogen atoms = 6.022×1023 atoms, 1 mol of water molecules = 6.022×1023 water molecules, 1 mol of sodium chloride = 6.022 × 1023 formula units of sodium chloride, Molar mass: The mass of one mole of a substance in gram is called its molar mass (gram molecular mass)., The molar mass in grams is numerically equal to molecular mass in u., Molar mass of oxygen = 32g, Molar mass of hydrogen = 2g etc., Limiting reagent (Limiting reactant), It is the reagent that limits a reaction. Or, the reagent which is completely consumed in a chemical reaction, is called limiting reagent or limiting reactant., For e.g. in the reaction 2SO2(g) + O2(g), 2 SO3(g), 2 moles of SO2 reacts completely with 1 mole of, O2 to form 2 moles of SO3. If we take 10 moles each of SO2 and O2, we get only 10 moles of SO3 because 10, moles of SO2 requires only 5 moles of O2 for the complete reaction. So here SO2 is the limiting reagent and 5, moles of O2 remains unreacted., Q) A reaction mixture for the production of NH3 gas contains 250 g of N2 gas and 50 g of H2 gas under, suitable conditions. Identify the limiting reactant if any and calculate the mass of NH 3 gas produced. (3), Ans: Nitrogen reacts with Hydrogen to form ammonia according to the equation,, N2(g) + 3H2(g), 2NH3(g), 28g, 6g, 34g, i.e. 28g N2 requires 6g H2 for the complete reaction., So 250g N2 requires, 6x 250/28 = 53.57g H2., But here there is only 50g H2., So we have to consider the reverse case., i.e. 6g H2 requires 28g N2., So 50g H2 requires 28 x 50/6 = 233.33g N2, Here H2 is completely consumed. So it is the limiting reagent., Amount of ammonia formed = 50+ 233.33 = 283.33 g, , 2. STRUCTURE OF ATOM, Rutherford’s Nuclear Model of Atom, Rutherford proposed an atom model based on his α–particle scattering experiment. He bombarded a very, thin gold foil with α–particles., The Experiment: A stream of high energy α–particles from a radioactive source was directed at a thin gold, foil. The thin gold foil was surrounded by a circular fluorescent zinc sulphide screen. Whenever α–particles, struck the screen, a tiny flash of light was produced at that point., , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 2

Page 3 :
Observations: The important observations made by Rutherford are:, 1. Most of the α– particles passed through the gold foil without any deviation., 2. A small fraction of the α–particles was deflected by small angles., 3. A very few α– particles (∼1 in 20,000) bounced back, that is, were deflected by nearly 180°., Conclusions: From the above observations, Rutherford made the following conclusions:, 1. Since most of the α–particles passed through the foil without any deviation, most space in the atom, is empty., 2. A few positively charged α– particles were deflected. This is because the positive charge of the atom, is concentrated in a very small volume at the centre called nucleus., 3. The volume occupied by the nucleus is negligibly small as compared to the total volume of the atom., The radius of the atom is about 10–10 m, while that of nucleus is 10–15 m., On the basis of above observations and conclusions, Rutherford proposed the nuclear model (Planetary, model) of atom. According to this model:, 1. All the positive charge and most of the mass of the atom are concentrated in an extremely small, region called nucleus., 2. Electrons are revolving round the nucleus with a very high speed in circular paths called orbits., 3. Electrons and the nucleus are held together by electrostatic forces of attraction., Drawbacks or Limitations of Rutherford’s atom model, 1. Rutherford’s model cannot explain the stability of the atom., 2. He could not explain the electronic structure of atom., Particle Nature of Electromagnetic Radiation:, Planck’s Quantum Theory, The important postulates of quantum theory proposed by Max Planck are:, 1. Atoms and molecules could emit or absorb energy not in a continuous manner, but discontinuously, in small packets of energy called quanta or photons., 2. The energy (E ) of each quantum of radiation is proportional to its frequency (ν)., It is expressed by the equation, E = hν, Where ‘h’ is known as Planck’s constant and its value is 6.626×10 –34 J s., Photoelectric effect, It is the phenomenon of ejection of electrons by certain metals (like potassium, rubidium, caesium, etc.) when light of suitable frequency incident on them. The electrons ejected are called photoelectrons., This phenomenon was first observed by H Hertz. The important characteristics of photoelectric effect are:, 1. The electrons are ejected from the metal surface as soon as the beam of light strikes the surface. i.e.,, there is no time lag between the striking of light beam and the ejection of electrons from the metal, surface., 2. The number of electrons ejected is proportional to the intensity or brightness of light., 3. For each metal, there is a minimum frequency known as threshold frequency *ν0], below which, photoelectric effect is not observed., 4. The kinetic energy of the ejected electrons is directly proportional to the frequency of the incident, light., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 3

Page 4 :
Explanation of photoelectric effect, A satisfactory explanation to photoelectric effect was first given by Albert Einstein using Planck’s, Quantum theory. According to him, when a photon of sufficient energy strikes the metal surface, it transfers, its energy to the electron of the atom of the metal instantaneously and the electron is ejected without any, time lag. A part of the energy is used to eject the electron from the metal surface (i.e. to overcome the, attractive force of the nucleus *work function, hν0]) and the other part is given to the ejected electron in the, form of kinetic energy. Greater the energy possessed by the photon, greater will be transfer of energy to the, electron and greater the kinetic energy of the ejected electron., Since the striking photon has energy equal to hν and the minimum energy required to eject the electron, is hν0 (also called work function, W0) then the difference in energy (hν – hν0) is transferred as the kinetic, energy of the photoelectron., According to law of conservation of energy, the kinetic energy of the ejected electron is given by, K.E = hν - hν0, Or,, hν = hν0 + ½ mev2, Where me is the mass of the electron and v is the velocity of the ejected electron., A more intense beam of light contains larger number of photons, so the number of electrons ejected is also, larger., Atomic spectrum, Line Spectrum of Hydrogen, When an electric discharge is passed through gaseous hydrogen, the H2 molecules dissociate and the, energetically excited hydrogen atoms produced emit electromagnetic radiation of discrete frequencies. The, hydrogen spectrum consists of several series of lines named after their discoverers. The first five series of, lines are Lyman, Balmer, Paschen, Brackett and Pfund series. Among these lines, the Balmer series is the, only series that we can be visible (since it lies in the visible region)., Johannes Rydberg proposed an equation for finding the wave number of the different lines in, Hydrogen spectrum. The expression is:, ῡ = 1/ λ = 109677 (1/n12 -1/n22) cm-1, Where n1 = 1, 2, 3,….. and n2 = n1 + 1, n1 + 2, ……, The different spectral lines, their n1 and n2 values and their spectral region are:, Series, , Spectral, region, Lyman, Ultra violet, Balmer Visible, Paschen Infra red, Brackett Infra red, Pfund, Infra red, , n1, , n2, , 1, 2, 3, 4, 5, , 2,3,4…., 3,4,5…., 4,5,6….., 5,6,7…., 6,7,8….., , BOHR’S MODEL FOR HYDROGEN ATOM, The general features of the structure of hydrogen atom and its spectrum was first explained by Niels, Bohr. The important postulates of his theory are:, 1. The electron in the hydrogen atom can move around the nucleus in circular paths of fixed radius and, energy. These paths are called orbits or stationary states or allowed energy states. These energy, levels are numbered as 1,2,3 etc or as K, L, M, N, etc. These numbers are known as Principal, quantum numbers., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 4

Page 5 :
2. The energy of an electron in an orbit does not change with time. However, when an electron absorbs, energy, it will move away from the nucleus (i.e. to a higher energy level) and when it loses energy, it, will move towards the nucleus (i.e. to a lower energy level)., 3. The radius of orbits can be given by the equation: rn = a0 n2 where a0 = 52.9 pm., Thus the radius of the first stationary state is 52.9 pm (called the Bohr radius). As n increases, the, value of r will increase., 4. The energy of electron in an orbit is given by the expression: En = -RH (1/n2), where n = 1,2,3…… and, RH is a constant called Rydberg constant. Its value is 2.18x10-18 J. The energy of the lowest state (the, ground state) is given by E1 = –2.18×10–18J. As the value of n increases, the energy of the electron, also increases., 5. The frequency of radiation absorbed or emitted when transition occurs between two stationary, states that differ in energy by ΔE, is given by:, ν = ΔE = E2 – E1, h, h, Where E1 and E2 are the energies of lower and higher energy levels respectively. This expression is, commonly known as Bohr’s frequency rule., 6. The angular momentum of an electron is an integral multiple of h/2π. i.e. m evr = nh, 2π, Where me is the mass of electron, v is the velocity of electron and r is the radius of Bohr orbit., n = 1,2,3.... … Thus an electron can move only in those orbits whose angular momentum is an integral, multiple of h/2π. So only certain fixed orbits are allowed., Significance of negative energy of electron, When the electron is free from the influence of nucleus, its energy is taken as zero. In this situation,, the electron is at the orbit with n = ∞. When the electron is attracted by the nucleus and is present in orbit, n, the energy is emitted and its energy is lowered. That is the reason for the presence of negative sign in, equation., Explanation of Line Spectrum of Hydrogen, According to Bohr atom model, radiation is absorbed if the electron moves from lower energy to, higher energy level and radiation is emitted if the electron moves from higher orbit to lower orbit. The, energy gap between the two orbits is given by equation:, ΔE = E2 – E1, But E1 = -RH and E2 = -RH, n 12, n 22, Therefore, ΔE = RH [1/n12 – 1/n22], = 2.18 x 10-18 [1/n12 – 1/n22], The frequency associated with the absorption and emission of the photon can be given as, ν = ΔE = RH 1 – 1, h, h n12 n22, = 2.18 x 10-18 1 - 1, 6.626 x 10-34 n12 n22, = 3.29 x 1015 [1/n12 – 1/n22], The wave number (ῡ) = 1/ λ = ν = RH, c hc, , 1 - 1, n 12 n 22, , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 5

Page 6 :
= 3.29 x 1015 1 - 1, 3 x 108, n 12 n 22, = 1.09677 x 107 1 - 1 m-1, n 12 n 22, , = 109677 1 - 1, n12 n22, , cm-1, , In case of absorption spectrum, n2 > n1 and the term in the bracket is positive and energy is absorbed., On the other hand, in case of emission spectrum n1 > n2, ΔE is negative and energy is released., Limitations of Bohr Atom Model: Bohr atom model could explain the stability and line spectra of hydrogen, atom and hydrogen like ions (e.g. He+, Li2+, Be3+ etc). But it has the following limitations:, 1. It could not explain the fine spectrum of hydrogen atom., 2. It could not explain the spectrum of atoms other than hydrogen., 3. It was unable to explain the splitting of spectral lines in the presence of electric field (Stark effect), and in magnetic field (Zeeman effect)., 4. It could not explain the ability of atoms to form molecules by chemical bonds., 5. It did not consider the wave character of matter and Heisenberg’s uncertainty principle., Dual Behaviour of Matter – de Broglie’s equation, de Broglie proposed that like radiation, matter also show both particle and wave nature. This is, known as dual behaviour of matter. i.e. electrons should have momentum as well as wavelength. He gave, the following relation between wavelength (λ) and momentum (p) for material particles., λ= h = h, mv p, Where m is the mass of the particle, v is the velocity and p is the momentum. The above equation is known, as de Broglie’s equation., Just like electromagnetic radiations, an electron beam also undergoes diffraction. This is an evidence, for the wave nature of electrons. An electron microscope works on the principle of wave nature of electron., According to de Broglie, every moving object has a wave character. The wavelengths associated with, ordinary objects are so short (because of their large masses) that their wave properties cannot be detected., The wavelengths associated with electrons and other subatomic particles (with very small mass) can be, detected experimentally., Heisenberg’s Uncertainty Principle, Werner Heisenberg proposed the uncertainty principle which is the consequence of dual behaviour, of matter and radiation. It states that “it is impossible to determine simultaneously, the exact position and, momentum (or velocity) of a moving microscopic particle like electron”., Mathematically, it can be given as in equation:, Δx. Δp ≥ h, 4π, Or,, Δx.mΔv ≥ h, 4π, Or,, , Δx.Δv ≥, , h, 4πm, Where Δx is the uncertainty in position and Δp is the uncertainty in momentum and Δv is the uncertainty in, velocity of the particle., If the position of the electron is known with high degree of accuracy (Δx is small), then the velocity of the, electron will be uncertain *Δv is large+ and vice versa., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 6

Page 7 :
Significance of Uncertainty Principle, Heisenberg Uncertainty Principle is significant only for motion of microscopic objects and is not, applicable to macroscopic objects. According to this Principle, we cannot determine the exact position and, momentum of an electron. Thus it rules out the existance of definite paths or orbits of electrons. We can, only say the probability of finding an electron at a given point., , Orbitals and Quantum Numbers, These are certain numbers used to explain the size, shape and orientation of orbitals. Or, Quantum numbers, are the address of an electron. There are four quantum numbers which describe the electron in an atom., They are Principal Quantum number (n), Azimuthal Quantum number (Ɩ), Magnetic Quantum number (m or, mƖ) and Spin Quantum number (s)., 1. Principal Quantum Number (n), The following informations are obtained from n., 1. It gives the size the orbit., 2. It gives the energy of electron in an orbit., 3. It gives the shell in which the electron is found., 4. It also gives the average distance between the electron and the nucleus. As the value of n increases,, the distance between the electron and the nucleus also increases., The possible values of n are 1, 2, 3, 4, 5 etc., If n = 1 the electron is in K shell, n = 2 the electron is in L shell, n = 3 the electron is in M shell and so on., 2. Azimuthal Quantum Number [Subsidiary or orbital angular momentum Quantum number] (Ɩ), The following informations are obtained from Ɩ., 1. It gives the shape of the orbital., 2. It gives the sub shell or sub level in which the electron is located., 3. It also gives the orbital angular momentum of the electron., For a given value of n, Ɩ can have n values ranging from 0 to n – 1. That is, for a given value of n, the possible, value of Ɩ are : Ɩ = 0, 1, 2, .......... (n-1)., For example, when n = 1, value of Ɩ is only 0. For n = 2, the possible value of Ɩ can be 0 and 1. For n =, 3, the possible Ɩ values are 0,1 and 2., Ɩ= 0 represents s orbital, Ɩ = 1 represents p orbital, Ɩ = 2 represents d orbital and Ɩ = 3 represents f, orbital, The number of sub shells in a principal shell is equal to the value of n. For example,, When n = 1, Ɩ= 0. i.e. K shell contains only one sub shell - s sub shell, when n = 2, Ɩ = 0 and1. i.e. L shell contains two sub shells - s and p sub shells, when n = 3, Ɩ = 0, 1 and 2. i.e. M shell contains three sub shells – s, p and d sub shells, when n = 4, Ɩ = 0, 1, 2 and 3. i.e. N shell contains four sub shells – s, p,d and f sub shells, 3. Magnetic Quantum Number (m or mƖ), It gives information about the orientation of orbitals in space. For a given ‘Ɩ’ value, there are 2Ɩ+1, possible values for m and these values are given by :, m = – Ɩ to 0 to + Ɩ, Thus for Ɩ = 0, mƖ = 0 [2(0)+1 = 1].. i.e. s sub shell contains only one orbital called s orbital., For Ɩ = 1, mƖ = –1, 0 and +1 [2(1)+1 = 3]. i.e. p subshell contains three orbitals called p orbitals (p x, py and pz)., For Ɩ = 2, mƖ = –2, –1, 0, +1 and +2, [2(2)+1 = 5]. i.e. d subshell contains five orbitals called d orbitals (d xy, dxz,, dyz, dx2- y2 and dz2), +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 7

Page 8 :
4. Spin Quantum Number (s or ms), It is the only experimental Quantum number and it gives the spin orientation of electrons. This spin, may be either clockwise or anticlockwise. So the values for s may be +½ or -½. +½ represents clock-wise spin, and-½ represents anticlock-wise spin., Rules for Filling of electrons in various orbitals, The filling of electrons into the orbitals of different atoms takes place according to the 3 rules aufbau principle, Pauli’s exclusion principle and the Hund’s rule of maximum multiplicity., 1. Aufbau principle:, The German word aufbau means ‘build up’. The building up of orbitals means the filling up of orbitals, with electrons. It states that the orbitals are filled in order of their increasing energies. In other words,, electrons first occupy the lowest energy orbital and then to higher energy orbitals., This rule has two sub rules:, a) The various orbitals are filled in the increasing order of their (n+Ɩ) value., b) If two orbitals have the same (n+Ɩ) values, the orbital with the lower n value is filled first., The increasing order of orbitals is as follows:, 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s..., 2. Pauli’s Exclusion Principle, It states that no two electrons in an atom can have the same set of four quantum numbers. i.e. an, orbital can accommodate a maximum of only 2 electrons with opposite spin., If 2 electrons have same values for n, Ɩ and m, they should have different values for s. i.e. if s = +½ for, the first electron, it should be -½ for the second electron., 3. Hund’s rule of maximum multiplicity, It states that electron pairing takes place only after partially filling all the degenerate orbitals., Orbitals having same energies are called degenerate orbitals. For example the electronic configuration of N, is 1s2 2s2 2px1py1pz1 and not 1s2 2s2 2px2py1., Electronic Configuration of Atoms, The distribution of electrons into various orbitals of an atom is called its electronic configuration., The electrons in the completely filled shells are known as core electrons and the electrons in the outer most, shell are called valence electrons., Stability of Completely Filled and Half Filled Subshells, For atoms having half filled or completely filled electronic configurations have extra stability, compared to other atoms. This is due to their symmetrical distribution of electrons and greater exchange, energy., For example, the electronic configuration of Cr is [Ar] 3d54s1 and not 3d44s2. This is due to the extra, stability of half filled d5 configuration. Similarly, for Cu the electronic configuration is [Ar] 3d104s1 and not, 3d94s2. This is due to the extra stability of fully filled d10 configuration., , 3. CLASSIFICATION OF ELEMENTS AND PERIODICITY IN PROPERTIES, Modern Periodic table, Henry Moseley’s work on the atomic spectra of elements proved that atomic number is the most, fundamental property. Based on this observation, he proposed a periodic law, which states that “the, properties of elements are the periodic functions of their atomic numbers”. This is known as Modern Periodic, law., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 8

Page 9 :
Based on modern periodic law, numerous forms of periodic tables have been proposed. The most, commonly used is the long form of periodic table., In this periodic table, the elements are arranged in the increasing order of their atomic number. It, contains 7 horizontal rows called periods and 18 vertical columns called groups. Elements having similar, outer electronic configurations are arranged in same group or family. The groups are numbered from 1 to, 18. Due to the similar outer electronic configuration and same valency, the elements present in the same, group have similar properties., There are 7 periods in Modern periodic table. The period number corresponds to the highest, principal quantum number of the elements. The first period contains 2 elements (H and He). Here the, subshell filled is 1s. This period is called very short period., The second period contains 8 elements (Li to Ne). Here the subshells filled are 2s and 2p. The third, period also contains 8 elements (Na to Ar). Here the subshells filled are 3s and 3p. These 2 periods are called, short periods., The fourth period contains 18 elements (K to Kr). Here the subshells filled are 4s, 3d and 4p. The fifth, period also contains 18 elements (Rb to Xe). Here the subshells filled are 5s, 4d and 5p. These 2 periods are, called long periods., The sixth period contains 32 elements (Cs to Rn). Here the subshells filled are 6s, 4f, 5d and 6p. This, period is the longest period in the periodic table and is called the Monster period. The seventh period is an, incomplete period. It can also accommodate 32 elements. Here the subshells filled are 7s, 5f, 6d and 7p., The 14 elements each of sixth and seventh periods are placed in separate rows below the main body, of the periodic table. These are together called inner transition elements. The 14 elements of sixth period, (from cerium to lutetium) are called Lanthanides or Lanthanones or Lanthanoids or rare earths. The 14, elements of seventh period (from thorium to lawrencium) are called Actinides or Actinones or Actinoids., The Modern periodic table is divided into 4 blocks based on the subshell in which the last electron, enters. They are s block, p block, d block and f block., , Periodic properties of Elements, The properties which repeat after a regular interval are called periodic properties. Some of the important, periodic properties of elements are atomic radius, ionic radius, ionization enthalpy, electron gain enthalpy,, electronegativity etc., 1. Atomic Radius, It is defined as the distance from the centre of the nucleus to the outermost shell having electrons. Atomic, radius of individual atoms cannot be determined. So it is expressed in any of the following methods:, a) Covalent radius: It is half of the inter nuclear distance between two covalently bonded (single, bonded) atoms. It is used to express the atomic radius of non-metal atoms., For e.g. the distance between 2 Cl atoms in Cl2 molecule is 198 pm. So its covalent radius is 99 pm., b) Metallic radius: It is the half of the inter nuclear distance between two metallic ions in a metal, crystal., c) van der Waal’s radius: It is defined as the half of the inter nuclear distance between two non bonded, atoms of separate molecules in the solid state., Atomic radius is commonly expressed in picometre (pm) or angstrom (A 0) unit. It is measured by x-ray, diffraction method or by spectroscopic method., Variation of atomic radius along a group and a period, The atomic size decreases from left to right in a period. This is because in a period, the electrons are, added to the same valence shell. Thus the number of shells remains same, but the effective nuclear charge, +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 9

Page 10 :
increases. So the atomic radius decreases. In a given period, alkali metals (group 1) have the maximum size, and halogens (group 17) have the minimum size., In a group, the atomic radius increases from top to bottom. This is because of the increase in no. of, shells and shielding effect. (In atoms with higher atomic number, the inner electrons partially shield the, attractive force of the nucleus. So the outer electrons do not experience the full attraction of the nucleus, and this is known as shielding effect or screening effect)., Atomic radius of noble gases is larger than that of halogens. This is because noble gases are monoatomic., So van der Waal’s radius is used to express the atomic radius which is greater than covalent radius., Ionic radius, It is defined as the half of the inter nuclear distance between cations and anions of an ionic crystal. The, variation of ionic radius is same as that of atomic radius., Generally a cation is smaller than its parent atom (e.g. Na+ is smaller than Na atom). This is because a, cation has fewer electrons, but its nuclear charge remains the same as that of the parent atom., An anion is larger than its parent atom (e.g. Cl- is larger than Cl atom). This is because the addition of, one or more electrons would result in an increased electronic repulsion and a decrease in effective nuclear, charge., Isoelectronic species:, Atoms and ions having the same number of electrons are called isoelectronic species., E.g. O2-, F-, Ne, Na+, Mg2+ etc. (All these contain 10 electrons), Among isoelectronic species, the cation with greater positive charge will have the smaller radius. This is, because of their greater effective nuclear charge. The anion with greater negative charge will have the larger, radius. Here the effective nuclear charge is less and the repulsion between electrons is greater. So the ion, will expand in size., 2. Ionisation enthalpy (∆iH), It is defined as the energy required to remove an electron from the outer most shell of an isolated, gaseous atom in its ground state., It may be represented as:, X(g) + ∆iH → X+(g) + e–, Its unit is kJ/mol., The energy required to remove the first electron from the outer most shell of a neutral atom is called, first ionisation enthalpy (∆iH1), X(g) + ∆iH1 → X+(g) + e–, Second Ionisation enthalpy (∆iH2) is the amount of energy required to remove an electron from a unipositive, ion., X+(g) + ∆iH2 → X2+(g) + e–, Energy is always required to remove an electron from an atom or ion. So ∆iH is always positive., The second ionisation enthalpy is always higher than first ionization enthalpy. This is because it is, more difficult to remove an electron from a positive charged ion than from a neutral atom., Similarly third ionisation enthalpy is higher than second ionisation enthalpy and so on., i.e. ∆iH1 < ∆iH2 < ∆iH3…………, As the ease of removal of electron increases, the ionisation enthalpy decreases., Factors affecting ionisation enthalpy, The important factors which affect ionisation enthalpy are:, a) Atomic size: Greater the atomic size (atomic radius), smaller will be the ionisation enthalpy., b) Nuclear charge: The value of ionisation enthalpy increases with nuclear charge., c) Shielding effect: As the shielding effect increases, the electrons can easily be removed and so the, ionisation enthalpy decreases., d) Presence of half filled or completely filled orbitals increases ionisation enthalpy., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 10

Page 11 :
Variation of ∆iH along a period and a group, Along a period, ionisation enthalpy increases from left to right. This is because of the decrease in, atomic radius and increase in nuclear charge. Thus alkali metals have the least ∆iH and noble gases have the, most., Down a group, ∆iH decreases due to increase in atomic radius and shielding effect. Thus among alkali, metals, lithium has the least ∆iH and francium has the most., In the second period of modern periodic table, the first ionisation enthalpy of Boron is slightly less, than that of Beryllium. This is because of the completely filled orbitals in Be (1s 22s2)., Similarly the first ionisation enthalpy of N is greater than that of Oxygen. This is because N has half, filled electronic configuration (1s22s22p3), which is more stable and so more energy is required to remove an, electron., 3. Electron gain enthalpy (∆egH), It is the heat change (enthalpy change) when an electron is added to the outer most shell of an isolated, gaseous atom. It can be represented as X(g) + e– → X-(g), Its unit is kJ/mol. It may be positive or negative depending on the nature of the element. For most of, the elements, energy is released when electron is added to their atoms. So ∆ egH is negative. Noble gases, have large positive electron gain enthalpy because of their completely filled (stable) electronic configuration., As the ease of addition of electron increases, electron gain enthalpy becomes more negative., The factors affecting Electron gain enthalpy are atomic size, nuclear charge, shielding effect and, electronic configuration. As the atomic size increases ∆egH decreases. When nuclear charge increases,, electron gain enthalpy increases and become more negative. As the shielding effect increases, ∆egH, decreases (or, becomes less negative). Presence of half filled or completely filled orbitals makes ∆egH less, negative., Periodic variation of ∆egH, From left to right across a period, ∆egH become more negative. This is because of decrease in atomic, radius and increase in nuclear charge. So the ease of addition of electron increases and hence the ∆egH., Down a group, ∆egH becomes less negative due to increase in atomic radius and shielding effect., Electron gain enthalpy of fluorine is less negative than chlorine. This is because, when an electron is, added to F, it enters into the smaller 2nd shell. Due to the smaller size, the electron suffers more repulsion, from the other electrons. But for Cl, the incoming electron goes to the larger 3 rd shell. So the electronic, repulsion is low and hence Cl adds electron more easily than F. Due to the same reason ∆egH of Oxygen is, less negative than S., Thus in modern periodic table, alkali metals have the least –ve ∆egH and halogens have the most –ve, ∆egH. Among halogens, the negative ∆egH decreases as follows., Cl > F > Br > I, The negative electron gain enthalpy is also called electron affinity., 4. Electronegativity, Electronegativity of an atom in a compound is the ability of the atom to attract shared pair of electron of, electrons. It is not a measurable quantity and so it has no unit. There are different scales for measuring the, Electronegativity of elements. Some of them are Pauling scale, Mulliken – Jaffe scale, Allred-Rochow scale, etc. The most commonly used is the Pauling Electronegativity scale proposed by Linus Pauling., Electronegativity depends on atomic size and nuclear charge. As the atomic radius increases,, electronegativity decreases. Greater the nuclear charge, greater will be the electronegativity. Generally, electronegativity increases across a period and decreases along a group. So in modern periodic table, F has, the maximum electronegativity and Fr has the minimum electronegativity. In Pauling Scale, electronegativity, of F is 4.0 and that of Oxygen is 3.5., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 11

Page 12 :
The electronegativity of an element is not constant. It varies depending on the element to which it is, bound. It is directly related to the non-metallic character of elements. An increase in electronegativity across, a period indicates an increase in non-metallic character and decrease in metallic character., , 4. CHEMICAL BONDING AND MOLECULAR STRUCTURE, The attractive force that binds the atoms together in a molecule is called a chemical bond. . It is, formed either by the transfer of electrons or by the sharing of electrons., Covalent bond, A bond formed by the mutual sharing of electrons between two or more atoms is called, covalent bond. It may be a single bond, double bond or triple bond. A covalent bond formed by the sharing, of one pair of electron is called a single bond. A double bond is formed when 2 pairs of electrons are shared, between 2 atoms and a triple bond is formed when 3 pairs of electrons are shared between two atoms. The, double and triple bonds are together called multiple bonds., , The shapes of molecules, Covalent bonds are directional in nature. i.e. they are directed to some specified positions in space., So covalent compounds have definite shapes., The Valence Shell Electron Pair Repulsion [VSEPR] Theory, This theory was proposed by Sidgwick and Powell and later modified by Nyholm and Gillespie. The, important postulates of this theory are:, 1) The shape of the molecule depends on the number of valence shell electron pairs (VSEPRs) around, the central atom., 2) The valence shell electron pairs repel each other., 3) In order to reduce the repulsion, the electron pairs stay at maximum distance., 4) Presence of lone pairs of electron causes distortion in the expected geometry of the molecule., 5) The repulsion between two lone pairs of electrons is different from those between two bond pairs or, between a lone pair and bond pair. The repulsion decreases in the order lone pair - lone pair > lone, pair - bond pair > bond pair - bond pair., 6) As the angle between the electron pairs increases, the repulsion decreases., Prediction of geometry of molecules using VSEPR theory, I), Molecules containing only bond pairs of electrons, No. of VSEPs, Type of Molecule, Structure, Bond angle, Examples, (bond pairs only), AB2 type, , 2, , 1800, , BeCl2, HgCl2, , AB3 type, , 3, , 1200, , BF3, BCl3, , AB4 type, , 4, , 109028l, , CH4, NH4+, , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 12

Page 13 :
Trigonal bipyramid, AB5 type, , 5, , 1200 and 900, , PCl5, , 900, , SF6, , Octahedral, AB6 type, , II), , 6, , Molecules containing both bond pairs and lone pairs, The presence of lone pairs of electron causes distortion in the shape of the molecules., Type of, Total no. No. of, No., Shape, e.g., molecule of VSEPs b.ps, of l.ps, Bent, SO2, O3, AB2E, 3, 2, 1, Trigonal Pyramid, , NH3, , 2, , Bent, , H2O, , 4, , 1, , See-saw, , SF4, , 5, , 3, , 2, , T-Shape, , ClF3, , AB5E, , 6, , 5, , 1, , Square Pyramid, , BrF5, , AB4E2, , 6, , 4, , 2, , Square Planar, , XeF4, , AB3E, , 4, , 3, , 1, , AB2E2, , 4, , 2, , AB4E, , 5, , AB3E2, , Explanation of shapes of ammonia and water molecules by VSEPR theory, 1. NH3, In ammonia, the central atom N has 5 valence electrons (7N – 2,5). Among these electrons, three are, used for the formation of bonds with hydrogen atoms and the remaining 2 electrons stay as lone pairs. So, there are 4 VSEPs. Hence the expected shape of the molecule is tetrahedral. But due to the presence of, lone pairs, the shape is distorted to triangular pyramid and the bond angle changes from 109 028l to 1070., , 2. H2O, In water, the central atom O has 6 valence electrons (8O – 2,6). Two of them are used for the, formation of bonds with hydrogen atoms and the remaining 4 electrons stay as lone pairs. So there are 4, VSEPs. Hence the expected shape of the molecule is tetrahedral. But due to the presence of 2 lone pairs, the, shape is distorted bent or angular or inverted v shape and the bond angle changes from 109028l to 104.50., , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 13

Page 14 :
Valence Bond Theory (VB Theory), This theory was introduced by Heitler and London and later developed by Linus Pauling in order to explain, the shape of molecules theoretically. VBT can be explained by considering the formation of H2 molecule., Consider 2 hydrogen atoms A and B with nuclei NA and NB and electrons eA and eB respectively. When, the two atoms are at large distance from each other, there is no interaction between them. So their, potential energy is zero. When the two atoms approach each other, new attractive and repulsive forces, begin to operate., Attractive forces arise between nucleus of one atom and electron of other atom i.e., N A– eB and NB– eA., Similarly repulsive forces arise between electrons of two atoms (eA – eB) and nuclei of two atoms NA – NB., Attractive forces bring the two atoms close to each other whereas repulsive forces push them away., Experimentally it has been found that the magnitude of new attractive force is more than the new, repulsive forces. So the two atoms approach each other and potential energy decreases. At a particular, stage, the net attractive force balances the net repulsive forces and the energy becomes minimum. At this, stage, the 2 hydrogen atoms are bonded together to form a stable molecule. The distance between the two, atoms at this stage is called bond length (74 pm). The amount of energy liberated at this stage is called bond, enthalpy(435.8kJ/mol), The potential energy diagram for the formation of H2 molecule is as shown below:, , Orbital overlap concept, Orbital overlapping is the process of partial interpenetration of atomic orbitals. The important, characteristics of orbital overlapping are:, 1. A covalent bond is formed by the overlapping of half filled atomic orbitals present in the valence shell, of atoms., 2. The overlapping orbitals should contain electron with opposite spin., 3. As a result of overlapping, the electrons get paired and a stable covalent bond is formed., 4. The strength of a covalent bond depends on the extent of overlapping. The greater the extent of, overlapping, the stronger will be the covalent bond formed., Types of overlapping, There are two types of orbital overlapping., 1. Axial overlapping:, If the overlapping of atomic orbitals take place along inter nuclear axis, it is called axial, overlapping or end to end overlapping. A bond formed by axial overlapping is called sigma (σ) bond., The electrons present in sigma bond are called sigma electrons. All single bonds are sigma bonds. A, sigma bond can be formed by the following ways:, , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 14

Page 15 :
i), , s-s overlapping: Here the overlapping of two half filled s-orbitals take place along the inter, nuclear axis., , ii), , s-p overlapping: It occurs with the overlapping of one half filled s-orbital and one half filled porbital., , iii), , p-p overlapping: Here two half filled p- orbitals of two atoms overlap., , 2. Lateral overlapping:, Here the overlapping take place perpendicular to the inter nuclear axis. The bond formed as a, result of lateral overlapping is called pi (π) bond. The electrons in pi bond are called π electrons., , A π bond is always present along with σ bonds. A double bond contains one σ bond and one π bond., A triple bond contains one sigma bond and two pi bonds., A sigma bond is stronger than a pi bond. This is because the extent of overlapping is greater in a, sigma bond., Hybridisation, It is the process of inter mixing atomic orbitals having slightly different energies to form new orbitals, having equivalent energy and identical shape. The new orbitals formed are called hybrid orbitals., Types of hybridisation, 1. sp3 hybridisation: It is the process of inter mixing of one s-orbital and three p-orbitals to form four, new orbitals having equivalent energy and shape. The 4 new orbitals formed are called sp 3 hybrid orbitals., They are directed to the four corners of a regular tetrahedron with bond angle 109 028l. Each sp3 hybrid, orbitals has 25% s-character and 75% p-character., e.g. i) . Formation of methane (CH4), In CH4, the central atom C has the electronic configuration, 2 2, 2, 6C – 1s 2s 2p, C (ground state) –, In order to explain the tetra valency of C, it is suggested that one of the electrons of 2s orbital is, promoted to 2p orbital., C (excited state) –, Now, one s-orbital and three p-orbitals undergo sp3 hybridisation. These sp3 hybrid orbitals are, directed to the four corners of a regular tetrahedron with bond angle 109 028l. Each of these sp3 hybrid, orbitals overlap with 1s orbital of H to form four C-H σ bonds., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 15

Page 16 :
ii), , Formation of ethane (C2H6), In ethane, each C atom undergoes sp3 hybridisation. Out of the 4 sp3 hybrid orbitals, one of, , each C, atom overlaps axially to form a C-C σ bond. The remaining 3 sp3 hybrid orbitals of each C atom overlap with, 1s orbital of H atom to form 6 C-H σ bonds., , iii), , Formation of Ammonia (NH3) molecule, In NH3, the central atom N has the electronic configuration 1s22s22p3., , The one s-orbital and three p-orbitals of N undergo sp3 hybridisation to form 4 sp3 hybrid orbitals., One of this sp3 hybrid orbitals is occupied by a lone pair and the other three sp 3 hybrid orbitals overlap with, 1s orbital of hydrogen to form 3 N-H bonds. Due to the greater repulsion between lone pair and bond pairs,, the shape is distorted to pyramidal and the bond angle becomes 1070., , iv), , Formation of water (H2O) molecule, In H2O, the central atom O has the electronic configuration 1s22s22p4., , Now the one s-orbital and three p-orbitals of O undergo sp3 hybridisation to form 4 sp3 hybrid, orbitals. Two of these sp3 hybrid orbitals are occupied by lone pairs and the other two sp 3 hybrid orbitals, overlap with 1s orbital of hydrogen to form 2 O-H bonds. Due to the greater repulsion between lone pairs,, the shape is distorted to angular shape or bent structure or inverted ‘v’ shape and the bond angle becomes, 104.50., , 2. sp2 hybridisation: It is the process of inter mixing of one s-orbital and two p-orbitals to form three, new orbitals having equivalent energy and shape. The 3 new orbitals formed are called sp2 hybrid orbitals., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 16

Page 17 :
They are directed to the three corners of an equilateral triangle. So the shape of the molecule is planar, triangular or trigonal planar with bond angle 1200. Each sp2 hybrid orbitals has 33% s-character and 66% pcharacter., e.g. i) Formation of BCl3, Here the central atom B has the electronic configuration 1s22s22p1. In the excited state, one of the 2s, electrons is promoted to vacant 2p orbital. So the configuration becomes 2s 12p2., Now one s-orbital and two p-orbitals undergo hybridisation. The 3 hybrid orbitals formed overlap with 2p, orbitals of Cl to form 3 B-Cl σ bonds. Since the hybridisation is sp2, the shape of the molecule is planar, triangular with bond angle 1200., , ii) Formation of ethane or ethylene (C2H4), In ethane, each C atom undergoes sp2 hybridisation. Out of the 3 sp2 hybrid orbitals, one of each C, overlaps axially to form a C-C σ bond. The remaining two sp2 hybrid orbitals of each C, overlap with the 1s orbital of H to form 4 C-H σ bonds., Now each C atom has one unhybridized p-orbital, which overlaps laterally to form a π bond. Thus, there are 5 σ bonds and one π bond in ethane., , 3. sp hybridisation: It is the process of inter mixing of one s-orbital and one p-orbital to form two new, orbitals having equivalent energy and shape. The 2 new orbitals formed are called sp hybrid orbitals. They, are directed in a line. So the shape is linear with bond angle 180 0. Each sp hybrid orbitals has 50% scharacter and 50% p-character., e.g. i) Formation of BeCl2, in BeCl2, the central atom Be has the electronic configuration 1s22s2. In the excited state, one of the 2s, electrons is promoted to 2p level. So the configuration becomes 1s22s12p1., Now one s-orbital and one p-orbital undergo sp hybridisation to form 2 new sp hybrid orbitals. Each, of these hybrid orbitals overlaps with the 2p orbitals of Cl to form 2 Be-Cl bonds. So the shape of the, molecule is linear with bond angle 1800., , ii) Formation of ethyne or acetylene (C2H2), In acetylene, each C atom undergoes sp hybridisation. Out of the 2 sp hybrid orbitals, one of each C, overlaps axially to form a C-C σ bond. The remaining two sp hybrid orbitals of each C overlap with the 1s, orbital of H to form 2 C-H σ bonds., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 17

Page 18 :
Now each C atom has 2 unhybridized p-orbitals, which overlap laterally to form 2 π bonds. Thus the, molecule has linear shape with bond angle 1800. Here there are 3 σ bonds and 2 π bonds in ethyne., , Molecular Orbital Theory, This theory was developed by F.Hund and R.S Mulliken. The important postulates of this theory are:, 1) In molecules, the electrons are present in some special type of orbitals called molecular orbitals, (M.Os)., 2) The atomic orbitals (A.Os) of comparable energy and proper symmetry combine to form molecular, orbitals., 3) Atomic orbitals are monocentric, while molecular orbitals are polycentric. i.e. electrons present in, atomic orbitals are attracted by only one nucleus. While the electrons present in molecular orbitals, are attracted by more than one nuclei., 4) The number of molecular orbitals formed = the number of atomic orbitals combined. i.e. if 2 atomic, orbitals combined, 2 molecular orbitals are formed. One is called bonding molecular orbital (BMO), and the other is called anti-bonding molecular orbitals (ABMO), 5) The BMO has lower energy and greater stability than the corresponding ABMO., 6) The molecular orbitals give the electron probability distribution around a group of nuclei., 7) The molecular orbitals are filled according to 3 rules – Aufbau principle, Pauli’s exclusion principle, and Hund’s rule., Formation of molecular orbitals – Linear Combination of Atomic Orbitals (LCAO) method, Molecular orbitals are formed by the combination of atomic orbitals by an approximate method, known as Linear Combination of Atomic Orbitals (LCAO). According to this theory, the combinations of, atomic orbitals take place by addition and subtraction of wave functions of atomic orbitals. The M.O, formed by the addition of A.Os is called the bonding molecular orbital (BMO) and by the subtraction of, A.Os is called the anti-bonding molecular orbitals (ABMO)., The electron density in a BMO is located between the nuclei of the bonded atoms. So the repulsion, between the nuclei is very low. Therefore a BMO always possess lower energy than the combining A.Os., While in the case of an ABMO, most of the electron density is located away from the space between the, nuclei. There is a nodal plane between the nuclei and hence the repulsion between the nuclei is high. So, an ABMO possess higher energy than the combining A.Os. ABMO is denoted by using an asteric (*) mark., Conditions for the combination of atomic orbitals, The combination of A.Os to form M.Os takes place only if the following conditions are satisfied:, 1. The combining A.Os must have the same or nearly the same energy., 2. The combining A.Os must have the same symmetry about the molecular axis., 3. The combining A.Os must overlap to the maximum extent., Types of molecular orbitals, M.Os of diatomic molecules are designated as σ (sigma), π (Pi), δ (delta) etc. the sigma M.Os are, symmetrical about the bond axis, while the pi M.Os are not symmetrical., Linear combination of two 1s atomic orbitals produces two M.Os – a BMO σ1s and an ABMO σ*1s., Similarly linear combination of two 2s atomic orbitals produces two M.Os – σ2s and σ*2s., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 18

Page 19 :
If z-axis is taken as the inter nuclear axis, linear combination of two 2p z orbitals produces two sigma M.Os, σ2pz and σ*2pz., While the combination of 2px and 2py orbitals produce M.Os which are not symmetrical about the, bond axis. So two 2px orbitals produces 2 sigma M.Os – π2px and π*2px and two 2py orbitals produce 2 M.Os, – π2py and π*2py., Energies of various M.Os, The various M.Os are filled in the increasing order of their energies (Aufbau Principle). The increasing order, of energy is:, σ1s < σ*1s < σ2s < σ*2s < (π2px = π2py) <σ2pz < (π*2px= π*2py) < σ*2pz, For O2, F2 and Ne2, the order is:, σ1s < σ*1s < σ2s < σ*2s < σ2pz < (π2px = π2py) < (π*2px= π*2py) < σ*2pz, Bond Order, It is defined as the half of the difference between the number of bonding electrons (Nb) and the number, of anti-bonding electrons (Na)., i.e., Bond order (B.O) = ½ [Nb –Na], A molecule is stable only if the bond order is positive. (i.e. Nb >Na). a negative bond order (i.e. Nb < Na or, Nb = Na) means an unstable molecule., For a single bond, B.O = 1, for a double bond B.O = 2 and so on. Bond order gives an approximate, measure of the bond length. In general, as the bond order increases, bond length decreases and bond, enthalpy increases., For molecules like He2, Be2, and Ne2, bond order = 0. So these molecules do not exist., Magnetic nature, If all the M.Os in a molecule are doubly occupied, the substance is diamagnetic. i.e. that substance is, repelled by an external magnetic field. If one or more M.Os are singly occupied, it is paramagnetic. i.e. it is, attracted by an external magnetic field. E.g. O2 molecule., Molecular orbital Diagram, The representation of various M.Os in the increasing order of energy is called M.O diagram., Bonding in Some Homonuclear Diatomic Molecules, 1. Hydrogen Molecule (H2), H2 molecule is formed by the combination of two Hydrogen atoms., i.e. 1H + 1H, H2, 1, 1, 1s, 1s, Total no. of electrons in H2 molecule = 2, So its M.O configuration is σ1s2, Bond order of H2 molecule = ½ [Nb –Na] = ½ [2 – 0] = 1, i.e. in H2 molecule, two hydrogen atoms are bonded together by a single bond., M.O diagram for H2 molecule is:, , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 19

Page 21 :
5. STATES OF MATTER, Gas Laws, These are some relationships connecting the measurable properties of gases like pressure (P), temperature, (T), volume (V) and number of moles (n). These are:, 1) Boyle’s Law (Pressure – Volume Relationship), It states that at constant temperature, the volume of a fixed mass of gas is inversely proportional to its, pressure. Mathematically,, P α 1/V, P = k x 1/V, where k is the proportionality constant., Or,, PV = k, a constant, Consider a fixed amount of gas at constant temperature T. Let V 1 & P1 are its initial volume and, pressure respectively. Let the gas undergoes expansion, so that its final volume and pressure becomes V 2, and P2., Then according to Boyle’s law,, P1V1 = P2V2, If we plot graphs between pressure against volume, pressure against 1/volume and PV against P at, constant temperature, the graphs obtained are as follows:, , P, V, , These graphs are obtained at constant temperature and so they are called isotherms., We know that density = mass/volume, i.e., d = m/V, If we put value of V in this equation from Boyle’s law equation, we get the relationship,, d = (m/k) x p, i.e. At constant temperature, pressure is directly proportional to the density of a fixed mass of the gas., 2) Charles’ Law (Temperature – Volume Relationship), It states that at constant pressure, volume of a fixed mass of gas is directly proportional to its, temperature., Mathematically, V α T, Or,, V=kxT, Or,, V/T = k, a constant, Consider a fixed amount of gas at constant pressure P. Let V1 be its volume at a temperature T1 and, V2 be its volume at a temperature T2., Then according to Charle’s law:, V1/T1 = V2/T2, Graphical Representation of Charle’s law, If volume is plotted against temperature at constant pressure, the graph obtained is as follows., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 21

Page 22 :
-273.150C, Since the graph is obtained at constant pressure, it is called isobar., If we extend the graph to temperature axis (X-axis), the graph will meet at -273.150C. At this, temperature, the volume of the gas becomes zero. This lowest hypothetical or imaginary temperature at, which gases are supposed to occupy zero volume is called Absolute zero of temperature and the scale of, temperature based on absolute zero is called Absolute scale of temperature. All gases become solid or liquid, before reaching this temperature., 3) Avogadro Law (Volume – no. of moles or Amount Relationship), It states that equal volumes of all gases under the same conditions of temperature and pressure, contain equal number of moles or molecules. This means that at constant temperature and pressure, the, volume of a gas is directly proportional to its number of moles (n) or molecules (N)., i.e.,, V α n, the number of moles, or,, V = k x n, where k is a constant, We know that number of moles (n) = mass in gram (w)/molar mass (M), i.e., n = w/M, So the above equation becomes:, V = k x w/M, Or,, M = k x w/V, Or,, M= k x d, Or,, Mαd, i.e., the density of a gas is directly proportional to its molar mass., Standard Temperature and Pressure (STP), Standard temperature and pressure (also called NTP, the normal temperature and pressure) means, 273.15 K (0°C) temperature and 1 bar pressure. These values approximate freezing temperature of water, and atmospheric pressure at sea level. At STP, molar volume of an ideal gas is 22.71 L mol–1., IDEAL GAS EQUATION, The combination of the three gas laws (Boyle’s law, Charles’ and Avogadro law) give a single equation which, is known as ideal gas equation., According to Boyle’s law: V α 1/P (At constant T and n), According to Charles’ Law: V ∝ T (At constant p and n), According to Avogadro Law: V ∝ n (At constant p and T), On combining these three laws we get:, V ∝ n x T x 1/P, Or,, V = R x n x T x 1/P (where R is a constant called universal gas constant), Or,, PV = nRT ………………….. (1), This equation is known as ideal gas equation., From equation (1), R = PV, nT, +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 22

Page 23 :
The value of R depends upon units in which P, V and T are measured., Values of R in different units, 1. L atm/K/mol 0.0821, 2. L bar/K/mol, 0.08314 (8.314x10-2), 3. Pa m3/K/mol 8.314, 4. J/K/mol, 8.314, Ideal gas equation is a relation between four variables and it describes the state of any gas, therefore, it is, also called equation of state., Relation between density and Molar mass, The ideal gas equation is PV = nRT, But n = w/M, So, PV = wRT/M, Or, P = wRT/MV, Or, P= dRT/M, Or, M = dRT/P, , Combined Gas Law, From ideal gas equation PV = nRT,, , PV = nR, T, If temperature, volume and pressure of a fixed amount of gas vary from T1, V1 and P1 to T2, V2 and P2 then, we can write, P1V1, = P2V2, T1, T2, This equation is known as combined gas law. By knowing the values of any 5 parameters, we can determine, the sixth one., KINETIC MOLECULAR THEORY OF GASES, In order to explain the gas laws theoretically Maxwell, Boltzmann, Claussius etc. put forward a theory, called kinetic molecular theory of gases or microscopic model of gases. The important postulates of this, theory are:, 1. Every gas contains a large number of minute and elastic particles (atoms or molecules). The actual, volume of the molecules is negligible compared to the volume of the gas., 2. There is no force of attraction between the gas particles., 3. The particles of a gas are in constant and random motion in straight line. During this motion they, collide with each other and also with the walls of the container., 4. The pressure of a gas is due to the wall collisions of the particles., 5. All collisions are perfectly elastic. i.e. the total energy of particles before and after collisions remains, the same., 6. At any particular time, different particles of a gas have different speed and hence different kinetic, energy., 7. The average kinetic energy of gas molecules is directly proportional to absolute temperature., Behavior of real gases – Deviation of real gases from ideal behavior, Real gases do not obey ideal gas equation at all conditions of temperature and pressure. This can be, understood from the PV against P graphs for different gases., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 23

Page 24 :
For ideal gases, PV is constant for any pressure. So the graph obtained is a straight line parallel to the, pressure axis (X – axis). For H2 and He, PV increases with increase of pressure. But for CO and CH4, the value, of PV first decreases, reaches a minimum value and then increases., The deviation from ideal behaviour can be measured in terms of compressibility factor Z, which is the, ratio of product PV and nRT. Mathematically,, Z = PV, nRT, For ideal gas Z = 1 at all temperature and pressures. So the graph of Z vs P will be a straight line parallel to, pressure axis. For real gases value of Z deviates from unity., , PV vs P graph, , Z vs P graph for real & ideal gases, , From the graph it is clear that all gases behave ideally at low pressure. As the pressure increases the, deviation from ideal behaviour also increases., The deviation of real gases from ideal behaviour is due to two wrong assumptions of kinetic, molecular theory of gases. They are:, 1. The actual volume of the molecules is negligible compared to the volume of the gas., 2. There is no force of attraction between the gas particles., These two assumptions become wrong at high pressure and low temperature. When the pressure, increases, the volume of the gas decreases. Then the volume of the gas molecule is also considered., At this condition, there arises inter molecular forces of attraction., Thus real gases obey ideal gas equation at low pressure and high temperature. Or, real gases, deviate from ideal behaviour at high pressure and low temperature., By considering the above two assumptions, van der Waal proposed an equation, which is applicable, to real gases. The equation is known as van der Waal’s equation and is given as:, (P + n2a/V2) (V- nb) = nRT, Where P is the pressure of the gas, V is the volume, R is the universal gas constant, T is the absolute, temperature, n is the no. of moles, ‘a’ and ‘b’ are called van der Wall’s constants. ‘a’ is a measure of, magnitude of inter molecular attractive forces within the gas and ‘b’ is related to the volume of the particles., The unit of ‘a’ is L2atm mol-2 and that of ‘b’ is L mol-1. The term n2a/V2 is related to pressure correction and, term ‘nb’ is related to volume correction., Boyle Temperature or Boyle Point, The temperature at which real gases obey ideal gas equation over an appreciable range of pressure is, called Boyle temperature or Boyle point. It depends on the nature of the gas., , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 24

Page 25 :
6. THERMODYNAMICS, It is a branch of science that deals with the relationship between heat and work. Chemical, thermodynamics is a branch of chemistry that deals with the heat changes associated with chemical, reactions., Some definitions:, System and Surroundings, System is the part of the universe which is under observation or investigation. The part of the, universe except system is called surroundings. The system and surroundings are separated by a boundary, which may be real or imaginary., System + surroundings → Universe, Types of systems, Depending on the ability to exchange energy and matter with the surroundings, systems are, classified into three types:, 1. Open system: It is a system that can exchange both energy and matter with the surroundings., E.g. Hot water taken in an open vessel., 2. Closed system: It is a system that can exchange only energy and not matter with the surroundings., E.g. Hot water taken in a closed vessel., 3. Isolated system: It is a system that cannot exchange both energy and matter with the surroundings., E.g. Hot water taken in a thermo flask., Extensive and Intensive Properties, Extensive properties are properties which depend on the amount of matter present in the system. Or,, these are the properties which change when a system is divided., E.g.: Volume (v), length (l), breadth (b), height (h), internal energy (U), enthalpy (H), entropy (S), Gibb’s, energy (G), heat capacity etc., Intensive properties are properties which are independent of the amount of matter present in the, system. Or, these are the properties which do not change when a system is divided., E.g. : Temperature (T), Pressure (P), Volume (V), density, refractive index, molar heat capacity, viscosity,, surface tension etc., State and Path functions, A function or a property that depends only on the initial and final state of a system and not on the path, followed is called a state function., E.g. for state functions: T, P, V, U, H, S, G etc., Path functions: These are properties which depend on the path followed also., E.g. heat (q) and work (w), Thermodynamic process, A process is the method (path) by which a state change occurs in a system. The different types of, thermodynamic process are:, 1. Isothermal process: It is a process that occurs at constant temperature. For this process ΔT = 0 but, Δq ≠ 0, 2. Isobaric process: It is a process that occurs at constant Pressure. For such a process ΔP = 0, 3. Isochoric process: It is a process that occurs at constant volume. For such a process ΔV = 0, 4. Adiabatic process: It is a process that occurs at constant heat energy. Here no heat enters into or, leaves from the system. For such a process Δq= 0 but ΔT ≠ 0, , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 25

Page 26 :
5. Cyclic process: It is a process that takes place in a cyclic manner. Here the system undergoes a series, of changes and finally returns to its initial state. For such a process ΔU=0 and ΔH = 0, 6. Reversible process: Every process is associated with two types of forces – driving force and opposing, force. Driving force favours the process while opposing force opposes it. If the driving and opposing, forces are differed by an infinitesimally small quantity the process takes place in both directions. Such, a process is called reversible process. For a reversible process, the system and surroundings are, always nearly in equilibrium with each other., 7. Irreversible process: If the driving and opposing forces are differed by a large quantity, then the, process takes place in only one direction. Such a process is called irreversible process., Heat and Work, Heat: It is a form of energy. Heat flows from a hot body to a cold body, when there is a thermal contact, between the two. When a body absorbs heat, its energy increases and when it evolves heat, its energy, decreases. Thus by international convention, when heat is absorbed by a system, q becomes +ve and when, heat is evolved by a system q becomes –ve., Work: Thermodynamics mainly deal with expansion work which is the product of pressure (P) and change in, volume (ΔV). i.e., expansion work (w) = -PΔV, For irreversible process, w = -PΔV and, For reversible process, w = -2.303nRT log(V2/V1)., Where V1 and V2 are the initial and final volumes of the system respectively., By international convention, w becomes +ve, when work is done on the system and w becomes –ve, when, work is done by the system., Free expansion: Expansion of a gas into vacuum (external pressure = 0) is called free expansion. No work is, done during free expansion of an ideal gas whether the process is reversible or irreversible., Internal Energy or Intrinsic Energy (U), It is the energy possessed by a body. It is the sum of different types of molecular energies like, translational kinetic energy, rotational kinetic energy, vibrational kinetic energy, electronic energy, nuclear, energy etc., Internal energy of a body is an extensive property and state function. We cannot calculate the exact, value of internal energy, but we can calculate the change in internal energy (ΔU) during a process by using, an apparatus called Bomb Calorimeter., The change in internal energy (ΔU) = U2-U1, where U1 and U2 are the initial and final internal energies, respectively. The unit of internal energy is kJ/mol., The internal energy of a system can change mainly by two ways:, 1. By the transfer of heat, 2. By doing work, First law of thermodynamics: It is same as law of conservation of energy. It states that energy can neither, be created nor be destroyed. Or, the total energy in the universe is always a constant. Or, the total energy of, an isolated system is always a constant., Mathematically ΔU = q + w ………………. (1), Where q is the amount of heat absorbed by the system and w is the amount of work done on the system., If there is only expansion work, the above equation becomes ΔU = q – PΔV ………… (2) (since, w = -PΔV).\, Significance of ΔU, We know that ΔU = q – PΔV, For a process taking place at constant volume, ΔV = 0. So ΔU = q v, i.e., ΔU gives the amount of heat absorbed or evolved by a system at constant volume., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 26

Page 28 :
Where, ai and bi are the stoichiometric coefficients of the products and reactants respectively in the, balanced chemical equation., For the reaction:, CH4 (g) + 2O2 (g) → CO2 (g) + 2H2O (l), ΔrH = ∑ ai .HProducts - ∑ bi.HReactants, = [Hm(CO2) + 2 x Hm(H2O)]– [Hm(CH4) + 2 x Hm(O2)], Where Hm is the molar enthalpy., Standard enthalpy of reactions (ΔrH0), The standard enthalpy of reaction is the enthalpy change for a reaction when all the substances are, in their standard states. In thermodynamics, the standard state of a substance at a specified temperature is, its pure form at 1 bar pressure. Usually data are taken at 298 K temperature., Hess’s Law of Constant Heat Summation, The law states that the total enthalpy change for a physical or chemical process is the same whether, the reaction taking place in a single step or in several steps. Or, the total enthalpy change for a process is, independent of the path followed., Thus according to Hess’s law, if a reaction takes place in several steps then its standard reaction, enthalpy is the sum of the standard enthalpies of the intermediate reactions., Illustration, Consider a process in which the reactant A is converted to product B, A, ∆H, B, in a single step by involving heat change ΔH. Let the same reactant A, is first converted to C, then to D and finally to B involving heat changes, ∆H1, ∆H3, ΔH1, ΔH2 and ΔH3 respectively., Then according to Hess’s law: ΔH = ΔH1 + ΔH2 + ΔH3, C, ∆H2 D, Thermochemical equations, A balanced chemical equation together with the value of enthalpy of reaction is called a, thermochemical equation. Here the physical state of the each of the reactants and products is also shown in, bracket., e.g. H2(g) + ½ O2(g) → H2O(g), ΔrH0 = -285.83 kJ/mol, or, H2(g) + ½ O2(g) → H2O(g) + 285.83 kJ/mol, Spontaneous Process, It is a process that takes place without the help of any external agency. All natural processes are, spontaneous. E.g. flow of water from high level to low level, flow of heat from hot body to cold body, inter, mixing of gases, burning of fuels, melting of ice, evaporation of water etc. A spontaneous process cannot, reverse its direction by its own., Spontaneous chemical reactions are also called feasible or probable or irreversible reactions., e.g. N2 + 3H2, 2NH3; ΔrH0 = - 46.1kJ/mol, 2H2 + O2, 2H2O; ΔrH0 = - 285.8 kJ/mol, A process that takes place with the help of an external agency is called non-spontaneous process., E.g. flow of water from low level to high level., Criteria for spontaneity, During spontaneous processes like burning of fuels, flow of heat from hot body to cold body, flow of, water from high level to low level etc, energy of the system decreases. So one of the criteria for spontaneity, is decrease in energy., But for some spontaneous processes like melting of ice, evaporation of water etc, heat is absorbed., i.e. the energy of the system increases during the process. The above processes are accompanied with, +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 28

Page 29 :
increase in disorder (entropy) of the system. Thus another criterion for spontaneity is increase in, disorderness or randomness of the system., Entropy (S), It is a measure of degree of disorderness or randomness of a system. As the disorderness increases,, entropy also increases. It is an extensive property and state function., If S1 is the initial entropy of a system and S2 is its final value, then the change in entropy ∆S = S2 –S1., For a given substance, the solid state has the least entropy and the gaseous state has the most., When temperature increases entropy also increases. The unit of entropy and entropy change is J/K/mol., If a system absorbs ‘q’ amount of heat reversibly at a temperature T, then the change in entropy,, ∆S = qrev., T, Where qrev. is the amount of heat absorbed reversibly., Entropy and spontaneity, During a spontaneous process, disorderness of the system increases. Thus entropy increases and, hence ∆S becomes positive., The total entropy change for the system and surroundings is given by ∆S Total = ∆Ssyst. + ∆Ssurr., For a spontaneous process, ∆STotal > 0, When a system attains equilibrium, the entropy becomes maximum and there is no further change in, entropy. So ∆S Total = 0, If ∆S Total < 0, the process is non-spontaneous., Second Law of Thermodynamics:, It can be stated as the entropy of the universe always increases during every spontaneous process., The second law of thermodynamics explains why spontaneous reactions are so common. In exothermic, reactions, heat released by the reaction increases the disorder of the surroundings. So the overall entropy, change (∆STotal) is positive and hence the reaction becomes spontaneous., Third law of Thermodynamics:, It states that the entropy of any pure crystalline substance approaches zero as the temperature, approaches absolute zero. The importance of this law is that we can calculate the absolute value of entropy, of pure substances from thermal data alone., Gibb’s energy (G), It is defined as the maximum amount of available energy that can be converted to useful work. It is a, measure of free energy and hence it is also known as free energy of the reaction., It is given by the equation, G = H – TS, It is an extensive property and a state function. If G1 is the initial Gibb’s energy and G2 is its final value, then, the change in Gibb’s energy (∆G) = G2 – G1, The unit of Gibb’s energy is kJ/mol., Relation between ∆G, ∆H and ∆S (Gibb’s Equation), We know that G = H- TS, So ∆G = ∆H - ∆(TS), = ∆H – (T∆S + S∆T), At constant temperature, ∆T = 0., So, ∆G = ∆H - T∆S, The change in Gibb’s energy for a system can be written as ∆Gsyst. = ∆Hsyst. - T∆Ssyst. This equation is known, as Gibb’s equation., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 29

Page 30 :
Gibb’s energy and Spontaneity of a reaction, We know that ∆STotal = ∆Ssyst. + ∆Ssurr. ……….. (1), Consider a system which absorbs ‘q’ amount of heat reversibly at a constant temperature T and constant, pressure P., Then, ∆Ssurr. = qp, T, But qp = ∆Hsurr. and ∆Hsurr. = -∆Hsyst. (Since, heat absorbed by the surroundings = heat evolved by the system), So, ∆Ssurr. = -∆Hsyst., T, So equation (1) becomes, ∆STotal = ∆Ssyst. - ∆Hsyst., T, On multiplying by –T, we get, -T∆STotal = -T∆Ssyst. + ∆Hsyst., Or, -T∆STotal = ∆Gsyst. (Since, ∆H syst. - T∆Ssyst. = ∆Gsyst.), For a spontaneous process, ∆STotal is positive. So ∆Gsyst. is negative. (or, ∆Gsyst. < 0), For a non-spontaneous process, ∆STotal is negative, so ∆Gsyst. is positive. (or, ∆Gsyst. > 0), For a process at equilibrium, ∆STotal = 0. So, ∆Gsyst. = 0, Conditions for ∆G to be negative, We know that for a spontaneous process, ∆Gsyst. is negative. Also ∆G = ∆H - T∆S., 1) If ∆H is negative and ∆S is +ve, ∆G is always –ve and the process is always spontaneous., 2) If both ∆H and ∆S are positive, ∆G will be –ve when T∆S > ∆H. This is possible at high temperature., 3) If both ∆H and ∆S are negative, ∆G will be –ve when T∆S < ∆H. This is possible at low temperature., Note: If ∆H is +ve and ∆S -ve, then ∆G will be always +ve and the process will be always non- spontaneous., , 7. EQUILIBRIUM, Reversible and irreversible reactions, A reaction that takes place in only one direction is called an irreversible reaction., e.g. Reaction between NaOH and HCl, NaOH + HCl → NaCl + H2O, Reversible reactions are those which take place in both directions. i.e. here reactants combined to form, products and the products recombine to form reactants., E.g. Haber process for the preparation of ammonia, N2(g) + 3H2(g), 2NH3(g), The process by which reactants are converted to products is called forward reaction and the process, by which products recombine to form reactants is called backward reaction. After sometimes, the rate of, forward reaction becomes equal to the rate of backward reaction and the reaction attains equilibrium. Thus, equilibrium is a state in which the rates of forward and backward reactions are equal., Equilibrium is dynamic in nature. i.e. at equilibrium the reaction does not stop. The reactant, molecules collide to form products and the product molecules collide to form the reactants and the rates of, these reactions are equal., Law of Chemical Equilibrium and Equilibrium Constant, This law was proposed by C.M. Guldberg and Peter Waage. It states that at constant temperature,, the product of concentration of the products to that of the reactants, in which each concentration terms is, raised to a power which is equal to the stoichiometric coefficients in the balanced chemical equation, has a, constant value., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 30

Page 32 :
Acids, Bases and Salts, Acid – base concepts:, 1. Arrhenius concept: According to this concept acids are substances which give hydrogen ion (H+) or, hydronium ion (H3O+) in aqueous solution and bases are substances which give hydroxyl ion (OH-) in, aqueous solution., e.g. HCl is an acid since it produces H3O+ in aqueous solution., HCl(l) + H2O(l), H3O +(aq) + Cl-(aq), e.g. for base is NaOH, NaOH(s) + H2O(l), Na+(aq) + OH-(aq), Note: H+ ions exist in water as hydronium ions (H3O+), H+ + H2O, H3O+, Limitations: this concept is applicable only to aqueous solutions. Also it could not account for the basicity of, substances like NH3 which do not possess OH- ion., 2. The Bronsted – Lowry concept:, According to this concept acids are proton (H+) donors and bases are (H+) acceptors., For example in the reaction NH3(l) + H2O(l), NH4+(aq) + OH-(aq), Here NH3 is a base since it accepts an H+ ion to form NH4+ and H2O is an acid since it donates an H+ ion, to form OH- . In the reverse reaction, NH4+ is an acid and OH- is a base., The acid base pair that differs by only one proton is called a conjugate acid – base pair., An acid formed from a base is called conjugate acid and a base formed from an acid is called conjugate base., e.g. NH3(l) + H2O(l), NH4+(aq) + OH-(aq), base, acid conj. acid conj. base, In general Acid – H+ → Conjugate base, Base + H+ → Conjugate acid, HCl + H2O, H3O+ + ClAcid base conj. acid conj. Base, If the acid is strong, its conjugate base is weak and vice versa. So in the above example Cl- is a weak, conjugate base of the strong acid HCl., Water can act both as acid and base. So it is an amphoteric substance., e.g., NH3 + H2O, NH4+ + OHAcid, HNO3 + H2O, H3O+ + NO3Base, 3. Lewis concept:, According to this concept acids are electron pair acceptors and bases are electron pair donors., Substances which donate electron pair are called Lewis bases and substances which accept electron pair are, called Lewis acids., Example for Lewis acids are BF3, AlCl3, H+, Co3+, Mg2+ etc., Example for Lewis bases are NH3, H2O, OH-, Cl-, Br- etc., For a substance to act as Lewis acid, it should contain vacant orbitals and for a substance to act as, Lewis base, it should contain lone pairs of electrons., e.g. for acid – base reaction is BF3 + NH3 → BF3, NH3, All cations are Lewis acids and all anions are Lewis bases., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 32

Page 33 :
The ionization constant of water (The ionic product of water), Water is a weak electrolyte and hence it ionizes only partially as:, H2O, H+ + OHOr,, H2O + H2O, H3O+ + OHThe dissociation constant, K = [H+][OH-], or, K = [H3O+][OH-], [H2O], [H2O], +, +, Or, Kw = [H ][OH ], or, Kw = [H3O ][OH ], Where Kw is called ionization constant of water or ionic product of water. It is defined as the product of the, molar concentration of hydrogen ion (hydronium ion) and hydroxyl ion in water or in any aqueous solution., For pure water at 298K, [H+] = [OH-] = 10-7M., Therefore, Kw = [H+][OH-] = 10-7 x 10-7 = 10-14M2, The value of Kw is temperature dependent., By knowing the concentrations of H3O+ and OH- ions, we can predict the nature of an aqueous solution., If [H3O+] > [OH-], the solution is acidic, If [H3O+] < [OH-], the solution is basic, If [H3O+] = [OH-], the solution is neutral, The pH scale, pH is defined as the negative logarithm of the hydrogen ion concentration or hydronium ion, concentration in moles per litre (i.e. molarity). i.e. pH = - log[H+] or pH = - log[H3O+], Negative logarithm of hydroxyl ion concentration in mol/L is called p OH., i.e. pOH = -log[OH-], For pure water, at 298K (250c), [H+] = 10-7. Therefore pH of pure water is 7., The pH scale was introduced by Sorensen. It contains numbers from 0 to 14. If the pH is less than 7,, the solution is acidic, if it is greater than 7, it is basic and if it is 7, the solution is neutral., If the pH is 0, 1, 2 etc., the solution is a strongly acidic and if it is 12, 13, 14 etc, it is strongly basic. The, pH of our blood is 7.4 and that of our saliva is 6.4. So blood is slightly basic and saliva is slightly acidic., Relation between pH and pOH, We know that Kw = [H+][OH-] = 10-14 at 298K, Taking negative logarithm on both sides:, -logKw = -log[H+] + -log[OH-] = -log 10-14, Or,, pKw = pH + pOH = 14, Thus by knowing the pH, we can calculate pOH as pOH = 14 - pH, Common Ion Effect, It is the suppression of the dissociation of a weak electrolyte by the addition of a strong electrolyte, containing a common ion. For e.g. consider the dissociation of acetic acid (a weak electrolyte)., CH3COOH(aq), CH3COO-(aq) + H+(aq), If we add some sodium acetate (CH3COONa) to the above equilibrium reaction, the concentration of, acetate ion increases. Then according to Le-Chatlier’s principle, the equilibrium will shift towards left or, the, rate of forward reaction decreases. i.e. the dissociation rate of acetic acid decreases. This is known as, common ion effect., Another example is the dissociation of the weak base ammonium hydroxide (NH4OH), NH4OH(aq), NH4+(aq) + OH- (aq), If we add some NH4Cl to the above equilibrium process, the concentration of NH4+ increases and hence the, equilibrium shifted to the left. i.e. the dissociation rate of NH4OH decreases., , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 33

Page 34 :
Buffer Solutions, Solution which resists the change in pH on dilution or with the addition of small amount of acid or, alkali is called Buffer solution. There are two types of buffer solutions – acidic buffer and basic buffer., Acidic buffer is a mixture of a weak acid and its salt with a strong base. E.g. a mixture of acetic acid, and sodium acetate acts as an acidic buffer around pH 4.75., Basic buffer is a mixture of a weak base and its salt with a strong acid. E.g. a mixture of NH4OH and, NH4Cl acts as a basic buffer around pH 9.25., , 8. REDOX REACTIONS, These are reactions involving both oxidation and reduction., Oxidation number (Oxidation state), Oxidation number of an element in a compound is the residual charge on the element when all the, other atoms are removed from it as ions. For example oxidation number of Mn in KMnO 4 is the residual, charge on Mn when one K atom and four O atoms removed from it as K + and O2- ions respectively., Rules used for the calculation of oxidation number, 1. The oxidation number of all elements in the free or the uncombined state is zero. For e.g. oxidation, number of H2, O2, Cl2, O3, P4, S8, Na, Mg, Al etc. is zero., 2. For simple ions, the oxidation number is equal to the charge on the ion. Thus Na+ ion has an, oxidation number of +1, Mg2+ ion +2, Fe3+ ion +3, Cl– ion –1, O2– ion –2 and so on., 3. All alkali metals have oxidation number of +1 and all alkaline earth metals have an oxidation number, of +2. Aluminium shows an oxidation number of +3 in all of its compounds., 4. The common oxidation number of oxygen is –2. But in peroxides (e.g., H2O2, Na2O2), oxidation, number of oxygen is –1 and in superoxides (e.g., KO2, RbO2), it is –½. In oxygen difluoride (OF2) and, dioxygen difluoride (O2F2), the oxygen is assigned an oxidation number of +2 and +1 respectively., 5. The common oxidation number of hydrogen is +1. But in hydrides, H shows -1 oxidation number., 6. The common oxidation number of halogens is -1. Fluorine shows only -1 oxidation number in all of its, compounds. But other halogens show positive oxidation numbers also in their oxides and oxoacids., 7. The algebraic sum of the oxidation number of all the atoms in a compound is zero., 8. In polyatomic ion, the sum of the oxidation numbers of all the atoms is equal to the charge on the, ion., Oxidation number Concept: According to this concept, oxidation is the process of increase in the, oxidation number of an element and reduction is the process of decrease in the oxidation number of an, element., A reagent that can increase the oxidation number of an element in a given substance is called, oxidising agent or oxidant and a reagent which lowers the oxidation number of an element in a given, substance is called reducing agent or reductant. Oxidising agent is always reduced and reducing agent is, always oxidised., For e.g. in the reaction, , the oxidation number of Zn, increases from 0 to +2 and that of Cu in CuSO4 decreases from +2 to 0. So Zn is oxidised and Cu in CuSO4 is, reduced., , Types of redox reactions, 1. Combination reactions: A combination reaction may be denoted as A + B → C, +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 34

Page 35 :
Here either A or B or both A and B must be in the elemental form. All combustion reactions are combination, redox reactions, since here one of the reactants is O2. Examples are:, , 2. Decomposition reactions, Decomposition reactions are the opposite of combination reactions. It involves the breakdown of a, compound into two or more components, in which at least one must be in the elemental state. It may be, denoted as: C → A + B. Examples are:, , All decomposition reactions are not redox reactions. For example, decomposition of calcium, carbonate is not a redox reaction, since it does not involve any change in the oxidation number., , 3. Displacement reactions: Here an ion (or an atom) in a compound is replaced by an ion (or an atom), of another element. It may be denoted as: X + YZ → XZ + Y, Displacement reactions are divided into two - metal displacement and non-metal displacement., a) Metal displacement reactions: Here a metal in a compound is displaced by another metal in the, uncombined state. These reactions find many applications in metallurgical processes in which pure metals, are obtained from their compounds in ores. Some examples are:, , b) Non-metal displacement reactions: The non-metal displacement redox reactions mainly include, hydrogen displacement. All alkali metals and some alkaline earth metals (Ca, Sr, and Ba) will displace, hydrogen from cold water. Less active metals such as magnesium and iron react with steam and produce, hydrogen gas., Most of the metals react with acids and liberate Hydrogen., Another example is Fluorine displaces O2 from water., , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 35

Page 36 :
4. Disproportionation reactions: These are a special type of redox reaction. In a disproportionation, reaction, an element in one oxidation state is simultaneously oxidised and reduced. One of the reacting, substances always contains an element that can exist in at least three oxidation states. The element in the, reactant is in the intermediate oxidation state and both higher and lower oxidation states of that element, are formed in the reaction., E.g. The decomposition of hydrogen peroxide., , Here the oxygen of peroxide is in –1 state and it is converted to zero oxidation state in O2 and –2 oxidation, state in H2O., Another e.g. is:, , Balancing of Redox Reactions by Half reaction method:, In this method, the redox equation is divided into 2 half reactions – oxidation half reaction and reduction, half reaction. Then they are balanced separately and added together to get the net balanced equation., The different steps involved in this method are:, Step 1: Produce unbalanced equation for the reaction in ionic form. Assign the oxidation number of each, element and find out the substance oxidised and reduced., Step 2: Separate the equation into half reactions - oxidation half reaction and reduction half reaction., Step 3: Balance the atoms other than O and H in each half reaction individually., Step 4: For reactions occurring in acidic medium, add H2O to balance O atoms and H+ to balance H atoms. In, basic medium also add equal number of OH- ions on both sides of the equation., Step 5: Now balance the ionic charges. For this add electrons to one side of the half reaction. Make the, number of electrons equal in the two half reactions by multiplying one or both half reactions by appropriate, coefficients., Step 6: Now add the two half reactions to get the overall reaction and cancel the electrons on each side., Step 7: Verify that the equation contains the same type and number of atoms and the same charges on both, sides., Example: Balance the following equation by the half reaction method., Fe2+(aq) + Cr2O72-(aq) + H+(aq), , Fe3+(aq) + Cr3+(aq) + H2O(l), , Solution, Step-1: Assign the oxidation number of each element and find out the substance oxidised and reduced., +2, , +6, , +3, , +3, , Fe2+ + Cr2O72- + H+, Fe3+ + Cr3+ + H2O, Here Fe is oxidised and Cr is reduced., Step-2: Separate the equation into 2 half reactions -oxidation half reaction and reduction half reaction., Oxidation half: Fe2+, Fe3+, Reduction half: Cr2O72Cr3+, Step-3: Balance the atoms other than O and H in each half reaction individually., Oxidation half: Fe2+, Fe3+, Reduction half: Cr2O722 Cr3+, Step-4: Now balance O and H atoms. Add H2O to balance O atoms and H+ to balance H atoms since the, reaction occurs in acidic medium., Oxidation half: Fe2+, Fe3+, Reduction half: Cr2O72-+ 14H+, 2 Cr3+ + 7 H2O, +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 36

Page 37 :
Step -5: Now balance the ionic charges. For this add electrons to one side of the half reaction., Oxidation half: Fe2+, Fe3+ + e–, Reduction half: Cr2O72-+ 14H++ 6 e–, 2 Cr3+ + 7 H2O, Step-6: Now add the two half reactions after equating the electrons., Oxidation half: (Fe2+, Fe3+ + e–) x 6, Reduction half: (Cr2O72-+ 14H++ 6 e–, 2 Cr3+ + 7 H2O) x 1, Overall reaction is: 6 Fe2+ + Cr2O72- + 14H+, 6 Fe3+ + 2 Cr3+ +7 H2O, Now the equation is balanced., , 9. HYDROGEN, Commercial production of Hydrogen, Commercially Hydrogen is prepared by the following methods:, 1. Electrolysis of acidified water using platinum electrodes, 2H2O(l) electrolysis 2H2(g) + O2(g), 2. High purity dihydrogen is obtained by the electrolysis of warm aqueous Ba(OH)2 solution using nickel, electrodes., 3. By the electrolysis of brine solution (NaCl solution). Here H2 gas is obtained at the cathode., At anode: 2Cl-(aq) → Cl2(g) + 2eAt cathode: 2H2O (l) + 2e- –→ H2(g) + 2OH-(aq), Overall reaction is: 2Na+ (aq) + 2Cl-(aq) + 2H2O(l) → Cl2(g) + H2(g) + 2Na+ (aq) + 2OH-(aq), 4. By the reaction of steam on hydrocarbons or coke at high temperature in the presence of catalyst., CH4(g) + H2O(g) → CO(g) + 3H2(g), The mixture of CO and H2 is called water gas. Since it is used for the synthesis of methanol and large number, hydrocarbons, it is also called synthesis gas or syn gas., Now syngas is also produced from sewage, saw-dust, scrap wood, newspapers etc. The process of, producing 'syngas' from coal is called 'coal gasification'., C(s) + H2O(g) 1270K CO(g) + H2(g), The production of dihydrogen can be increased by reacting carbon monoxide of syngas mixtures with, steam in the presence of iron chromate as catalyst. This is called water-gas shift reaction., CO(g) + H2O(g) 673K, catalyst CO2(g) + H2(g), HYDRIDES, The binary compounds of hydrogen with other elements are called Hydrides. They are classified into three:, 1. Ionic or saline or salt-like hydrides:, These are hydrides formed by s-block elements. They are crystalline, non-volatile and stoichiometric, solids. They are non-conductors in the solid state but conduct electricity in the molten state or in aqueous, solution state., e.g. NaH, KH, CaH2, BaH2 etc., 2. Covalent or Molecular Hydrides:, These are the hydrides of p-block elements. Examples are CH4, NH3, H2O and HF. Being covalent, they, are volatile compounds. Molecular hydrides are further classified into three., (i) electron-deficient,, (ii) electron-precise and, (iii) electron-rich hydrides., An electron-deficient hydride has very few electrons for writing its Lewis structure. E.g. Diborane (B2H6)., All elements of group 13 will form electron-deficient compounds. They act as Lewis acids (i.e. they accept, electron pairs)., , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 37

Page 38 :
Electron-precise compounds have the required number of electrons to write their Lewis structures. All, elements of group 14 form such compounds (e.g., CH4, SiH4 etc.), Electron-rich hydrides have excess electrons which are present as lone pairs. Elements of group 15 to 17, form such compounds. They behave as Lewis bases (i.e., electron donors)., 3. Metallic Hydrides:, These are formed by d and f-block elements [Except the elements of group 7, 8 and 9]. Being deficient in, hydrogen, they are almost non-stoichiometric. They conduct heat and electricity., e.g. LaH2.87, YbH2.55, TiH1.5–1.8, ZrH1.3–1.75, VH0.56, NiH0.6–0.7, PdH0.6–0.8 etc., In these hydrides the hydrogen atom is occupied in the metal lattice. So they are also called interstitial, hydrides. Due to the property of absorption of hydrogen on interstitial sites, they are widely used as, hydrogenation catalysts., Hard and soft water, Water which does not easily form lather with soap is called hard water. It is due to the presence of, calcium and magnesium salts in the form chlorides, sulphates and bicarbonates. Water free from soluble, salts of calcium and magnesium is called soft water. It easily forms lather with soap., Soaps are sodium or potassium salts of fatty acids like palmitic acid, stearic acid oleic acid etc. They, react with calcium or magnesium salts presenting in hard water and form precipitates. There are two types, of hardness of water – temporary hardness and permanent hardness., Disadvantages of Hardness of water:, 1. It results in wastage of soap., 2. It results in scale formation in boilers which ultimately results in boiler explosion., HYDROGEN PEROXIDE (H2O2), Hydrogen peroxide is an important chemical used in pollution control treatment., Storage, H2O2 decomposes slowly on exposure to light., 2H2O2(l) → 2H2O(l) + O2(g), In the presence of metal surfaces or traces of alkali (present in glass containers), the above reaction is, catalysed. It is, therefore, stored in wax-lined glass or plastic vessels in dark. Urea can be added as a, stabiliser. It is kept away from dust because dust can induce explosive decomposition of the compound., , 10., , The s-Block Elements, , These are elements in which the last electron enters in the outermost s-orbital. They include elements of, group I and II. Group I elements are Lithium (Li), Sodium (Na), Potassium (K), Rubidium (Rb), Caesium (Cs), and Francium (Fr). They are collectively called alkali metals because they dissolve in water to form strong, alkalies., Group II elements are Beryllium (Be), Magnesium (Mg), Calcium (Ca), Strontium (Sr), Barium (Ba) and, Radium (Ra). They are collectively called alkaline earth metals (except Be) because their oxides and, hydroxides (except Beryllium) are alkaline in nature and are found in the earth’s crust., The general electronic configuration of s-block elements is [noble gas] ns1 for alkali metals and [noble gas], ns2 for alkaline earth metals., Chemical properties of Alkali metals, Solution in liquid ammonia:, The alkali metals dissolve in liquid ammonia to give deep blue solutions which are good conductors., M + (x+y)NH3, [M(NH3)x]+ + e[(NH3)y](Alkali, (Ammoniated (Ammoniated, metal), metal ion), electron), +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 38

Page 39 :
The blue colour of the solution is due to the ammoniated electron, which absorbs energy in the visible, region and gives blue colour to the solution. The solution is paramagnetic and on standing slowly liberates, hydrogen resulting in the formation of amide (MNH2)., [M(NH3)x]+ → MNH2 + ½ H2, In concentrated solution, the blue colour changes to bronze colour and become diamagnetic., Anomalous Properties of Lithium, Due to its small size and high polarizing power, Lithium shows some properties different from that of other, alkali metals. Some of these are:, i), Li is much harder and has higher melting point and boiling point than other alkali metals., ii), Li is the least reactive but the strongest reducing agent among all the alkali metals., iii), It forms only monoxide with oxygen., iv), LiCl is deliquescent and crystallizes as a hydrate (LiCl.2H2O). But the other alkali metal chlorides, do not form hydrates., v), Lithium bicarbonate (LiHCO3) is stable only in solution., vi), Lithium nitrate on heating gives Li2O, while other alkali metal nitrates decompose to form nitrite., 4 LiNO3 → 2Li2O + 4NO2 +O2, 2NaNO3 → 2NaNO2 + O2, vii), LiF and Li2O are comparatively much less soluble in water than the corresponding compounds of, other alkali metals., , Some important compounds of Sodium, 1. Sodium Carbonate [Na2CO3.10H2O] (Washing Soda), , Preparation: Solvay process, In this process, CO2 gas is passed through concentrated NaCl solution saturated with ammonia., Ammonium carbonate first formed is converted to ammonium bicarbonate and finally reacts with NaCl to, form NaHCO3., 2NH3 + H2O + CO2 → (NH4)2CO3, (NH4)2CO3 + H2O + CO2 → 2NH4HCO3, NH4HCO3 + NaCl → NH4Cl + NaHCO3, Sodium bicarbonate crystals are separated and heated to get sodium carbonate., 2NaHCO3 → Na2CO3 + CO2 + H2O, In this process, NH3 is recovered when the solution containing NH4Cl is treated with Ca(OH)2., 2NH4Cl + Ca(OH)2 → 2NH3 + CaCl2 + 2H2O, Note: Solvay process cannot be used for the preparation of K2CO3 because potassium bicarbonate (KHCO3) is, so much soluble in water that it does not get precipitated by the addition of NH 4HCO3 to a saturated solution, of KCl., Properties:, Action of Heat: On heating, the decahydrate ( Na2CO3.10H2O) loses its water of crystallisation to form a, monohydrate. Above 373K the monohydrate becomes completely anhydrous and changes to a white, powder called “soda ash”., Na2CO3.10H2O → Na2CO3.H2O + 9H2O, Na2CO3.H2O → Na2CO3 + H2O, Uses of washing soda, i), It is used in water softening, laundering and cleaning., ii), It is used in the manufacture of soap, glass, borax and caustic soda., iii), It is used in paper, paints and textile industries., iv), It is used as a laboratory reagent., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 39

Page 40 :
2. Sodium bicarbonate, NaHCO3 (Baking Soda), It is prepared by saturating a solution of Sodium carbonate with CO2., Na2CO3 + H2O + CO2 → 2NaHCO3, Uses: i) It is a mild antiseptic for skin infection ii) It is used as a fire extinguisher., Some Important Compounds of Calcium, 1. Calcium Oxide, CaO [Quick lime], It is prepared commercially by heating lime stone (CaCO3) in a rotary kiln (furnace) at 1070 – 1270K., CaCO3 → CaO + CO2, The CO2 is removed as soon as it is formed to enable the reaction to proceed completion., Properties:, On exposure to air, it absorbs moisture and CO2., CaO + CO2 → CaCO3, CaO + H2O → Ca(OH)2, The addition of limited amount of water breaks the big pieces of lime. This process is called slaking of lime., The product obtained is called slaked lime. Quick lime slaked with soda (NaOH) gives solid soda lime (NaOH +, CaO)., Because of the basic nature of CaO, it combines with acidic oxides at high temperature to form salts., So it is used as a flux in metallurgy., CaO + SiO2 → CaSiO3, 6CaO + P4O10 → 2Ca3(PO4)2, Uses:, 1. It is an important primary material for the manufacture of cement and is the cheapest form of alkali., 2. It is used in the manufacture of Na2CO3 from caustic soda., 3. It is used in the purification of sugar and in the manufacture of dye stuffs., , Calcium Hydroxide, Ca(OH)2 [Slaked lime], Preparation: It is prepared by adding water to quick lime., CaO + H2O → Ca(OH)2, An aqueous solution of slaked lime is known as lime water and a suspension of slaked lime in water is known, as milk of lime., Properties:, When CO2 is passed through lime water, it turns milky due to the formation of CaCO 3. On passing CO2, continuously, the solution becomes clear due to the formation of soluble calcium bicarbonate [Ca(HCO 3)2], Ca(OH)2 + CO2 → CaCO3 +H2O, CaCO3 + H2O + CO2 → Ca(HCO3)2, When dry chlorine gas is passed through dry slaked lime, we get bleaching powder (a mixture of CaCl 2 &, calcium hypochlorite), 2Ca(OH)2 + 2Cl2 → CaCl2 + Ca(OCl)2 + 2H2O, Uses:, i), It is used in the preparation of mortar, a building material., ii), It is used in white washing due to its disinfectant nature., iii), It is used in glass making, in tanning, for the preparation of bleaching powder and for purification, of sugar., Calcium Carbonate, CaCO3 [Lime stone], Calcium carbonate occurs in nature in several forms like limestone, chalk, marble etc. It can be prepared, by passing carbon dioxide through slaked lime or by the addition of sodium carbonate to calcium chloride., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 40

Page 41 :
Ca(OH)2 + CO2 → CaCO3 + H2O, CaCl2 + Na2CO3 → CaCO3 + 2NaCl, Properties, When heated to 1200 K, it decomposes to evolve carbon dioxide., 2 CaCO3 ⎯⎯⎯⎯→CaO + CO2, It reacts with dilute acid to liberate carbon dioxide., CaCO3 + 2HCl → CaCl2 + H2O + CO2, CaCO3 + H2SO4 → CaSO4 + H2O + CO2, Uses: 1. It is used as a building material in the form of marble and in the manufacture of quick lime., 2. Calcium carbonate along with magnesium carbonate is used as a flux in the extraction of metals such as, iron., 3. Specially precipitated CaCO3 is extensively used in the manufacture of high quality paper., 4. It is also used as an antacid, mild abrasive in tooth paste, a constituent of chewing gum, and filler in, cosmetics., 4. Calcium Sulphate (Plaster of Paris), CaSO4·½ H2O, It is a hemihydrate of calcium sulphate. It is obtained when gypsum [CaSO4·2H2O] is heated to 393 K., CaSO4.2H2O 393K, CaSO4. ½ H2O + 3/2 H2O, Above 393 K, no water of crystallisation is left and anhydrous calcium sulphate (CaSO 4) is formed. This is, known as ‘dead burnt plaster’., It has a remarkable property of setting with water. On mixing with an adequate quantity of water it forms a, plastic mass that gets into a hard solid in 5 to 15 minutes. During this process its volume increases. So it is, used for the preparation of statues., Uses: 1. The largest use of Plaster of Paris is in the building industry as well as plasters., 2. It is used for immoblising the affected part of organ where there is a bone fracture or sprain., 3. It is also employed in dentistry, in ornamental work and for making casts of statues and busts., Cement, Cement was first introduced by Joseph Aspidine. It is a product obtained by combining lime (CaO), with clay which contains silica, SiO2 along with the oxides of aluminium, iron and magnesium., The raw materials for the manufacture of cement are limestone and clay. When clay and lime are strongly, heated together they fuse and react to form ‘cement clinker’. This clinker is mixed with 2-3% by weight of, gypsum (CaSO4·2H2O) to form cement. The purpose of adding gypsum is to slow down the process of setting, of the cement so that it gets sufficiently hardened., Setting of Cement: When mixed with water, the setting of cement takes place to give a hard mass. During, this process the hydration of the silicates and aluminates occurs and a large amount of heat is evolved., , 11., , The p-Block Elements, , These are elements in which the last electron enters in the outer most p-subshell. They include elements of, groups 13 to 18. Their general outer electronic configuration is ns2np1-6 (except for He). They include metals,, non-metals and metalloids., Compounds of Boron, Diborane (B2H6): The simplest boron hydride is borane (BH3), which exists as a dimer called Diborane (B2H6). It, is prepared by treating BF3 with Lithium aluminium hydride (LiAlH4) in ether., 4BF3 + 3 LiAlH4 → 2B2H6 + 3LiF + 3AlF3, In the laboratory, it is prepared by the oxidation of sodium borohydride with iodine., 2NaBH4 + I2 → B2H6 + 2NaI + H2, +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 41

Page 42 :
Diborane is prepared industrially by the reaction of BF3 with sodium hydride., 2BF3 + 6NaH 450K, 2B2H6 +6NaF, Diborane is a colourless, highly toxic gas. It catches fire spontaneously on exposure to air. It burns in oxygen, to form B2O3 and evolve large amount of heat., B2H6 +3O2 → B2O3 + 3H2O: ∆H = -1976 kJ/mol, It readily hydrolysed by water to give boric acid., B2H6(g) + 6H2O(l), B(OH)3(aq) + 6H2(g), Diborane react with ammonia to form B2H6.2NH3 which on further heating gives Borazine (B3N3H6) which is, commonly known as inorganic benzene. Its structure is similar to benzene with alternate BH and NH groups., 3B2H6 + 6NH3 → 3 B2H6.2NH3 → 2 B3N3H6 + 12H2, , Structure of Diborane, In diborane, each boron atoms is in sp3 hybridisation. The two boron atoms and 4 hydrogen atoms lie, in one plane. These four H atoms are called terminal hydrogen atoms. The other two hydrogen atoms lie one, above and one below this plane. These H atoms are called bridging hydrogen atoms. The four terminal B-H, bonds are regular two centre-two electron bonds while the two bridge (B-H-B) bonds are three centre- two, electron (3c-2e) bonds or banana bonds. Thus diborane is an electron deficient compound., , Allotropes of Carbon, The existance of an element in two or more forms with same chemical properties but different, physical properties is known as allotropy. Carbon exists in crystalline and amorphous allotropes. The, important crystalline allotropes of Carbon are diamond, graphite and fullerene., a) Diamond: In diamond, each carbon atom is in sp3 hybridisation and linked to four other carbon, atoms in a tetrahedral manner. So it has a a rigid three dimensional network of carbon atoms. It is very, difficult to break covalent bonds and, therefore, diamond is a hardest substance on the earth. It is used as, an abrasive for sharpening hard tools, in making dies and in the manufacture of tungsten filaments for, electric light bulbs., b) Graphite: Graphite has a layered structure. Different layers are held by weak van der Waals, forces of attraction. Each layer contains planar hexagonal rings of carbon atoms. Here each carbon atom is, in sp2 hybridisation and makes three C-C sigma bonds with three neighbouring carbon atoms. Fourth, electron forms a π bond. These electrons are delocalised and are mobile. Therefore graphite conducts, electricity. Due to layered structure, it is very soft and slippery. For this reason graphite is used as a dry, lubricant in machines running at high temperature., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 42

Page 43 :
c) Fullerenes: These are the cage like spherical molecules of formula C60, C70, C76, C84 etc. These are, prepared by heating of graphite in an electric arc in the presence of inert gases like helium or argon., The most commonly known fullerene is C60, which is known as Buckminster fullerene. It contains, twenty six- membered rings and twelve five membered rings. A six membered ring is fused with six or five, membered rings but a five membered ring can only fuse with six membered rings. All the carbon atoms are, equal and they undergo sp2 hybridisation. Each carbon atom forms three sigma bonds with other three, carbon atoms. The remaining electron at each carbon is delocalised in molecular orbitals. This gives an, aromatic character to the molecule., Thermodynamically, graphite is the most stable allotrope of carbon., , Structure of Diamond, , Structure of Graphite, , Structure of Fullerene, , Amorphous forms of carbon are charcoal, coke and carbon black. Carbon black is obtained by burning, hydrocarbons in limited supply of air. Charcoal and coke are obtained by heating wood or coal respectively, at high temperature in the absence of air., Carbon Monoxide (CO):, Preparation:, Carbon burns in limited supply of air to give CO., 2C(s) + O2(g) ∆ 2CO(g), By the dehydration of formic acid with conc. H2SO4 at 373 K., HCOOH Conc. H2SO4/∆ CO + H2O, Commercially, it is prepared by passing steam over red hot coke., C(s) + H2O(g) 473K – 1273K CO(g) + H2(g), The mixture of CO and H2 is known as water gas or Syn gas., If instead of steam, air is passed over red hot coke, we get a mixture of CO and nitrogen commonly known, as producer gas., C(s) + O2(g) + 4N2(g) 1273K 2CO(g) + N2(g), Both water gas and producer gas are used as industrial fuels., Properties: CO is a colourless, odourless toxic gas and is insoluble in water. It is a powerful reducing agent. It, reduces almost all metal oxides., Fe2O3(s) + 3CO(g), 2Fe(s) + 3CO2(g), ZnO(s) + CO(g), Zn(s) + CO2(g), Structure: In CO, there are one sigma and two pi bonds between carbon and oxygen (:C ≡ O:). Because of the, presence of lone pair on carbon, CO molecule acts as an electron donor and reacts with metals to form, metal carbonyls., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 43

Page 44 :
CO is highly poisonous in nature because it forms a highly stable complex with haemoglobin (carboxy, haemoglobin). This prevents haemoglobin in RBC from carrying oxygen round the body. This will results in, headache, weak eyesight, nervousness and even death., Silicones:, Silicones are a group of organosilicon polymers, which have (-R2SiO-) as a repeating unit. (Where, R is alkyl or aryl group)., Manufacture:, When methyl chloride reacts with silicon in the presence of copper as a catalyst at a temperature, 573K, dimethyl dichlorosilane [(CH3)2SiCl2] and other methyl substituted chlorosilanes are formed. Hydrolysis, of dichlorosilane followed by condensation gives straight chain polymers., 2CH3Cl + Si Cu; 573K, (CH3)2SiCl2 2H2O (CH3)2Si(OH)2, , n(CH3)2Si(OH)2 polymerisation, The chain length of the polymer can be controlled by adding (CH3)3SiCl (Trimethyl chlorosilane)., Properties:, They are water repelling in nature. They have high thermal stability, high dielectric strength and, resistance to oxidation and chemicals. So they are used as sealant, greases, electrical insulators and for, water proofing of fabrics. Being biocompatible they are also used in surgical and cosmetic plants., , 12. ORGANIC CHEMISTRY – SOME BASIC PRINCIPLES AND TECHNIQUES, Organic chemistry is the branch of chemistry that deals with carbon compounds. But all carbon, compounds are not considered as organic compounds. (E.g. CO2, CO, metal carbonates, bicarbonates etc.)., So organic chemistry can be defined as the branch of chemistry that deals with hydrocarbons and their, derivatives. Hydrocarbons are the major class of organic compounds and they contain only carbon and, hydrogen atoms. All other organic compounds are formed by replacing one or more hydrogen atoms of, hydrocarbons by other atoms or groups (They are called hydrocarbon derivatives)., , Nomenclature of organic compounds, An organic compound has two types of names – Common name and IUPAC name. The common, name is based on the source or some properties. For e.g. citric acid is named so because it is found in citrus, fruits and the acid found in red ant is named formic acid since the Latin word for ant is formica., IUPAC Nomenclature of organic compounds, A systematic name of an organic compound is generally derived by identifying the parent, hydrocarbon and the functional group(s) attached to it. This name is called IUPAC name. It contains two, parts – word root and suffix or prefix. The word root indicates the number of carbon atoms in the, compound. The word roots for compounds containing 1 -12 carbon atoms are as follows:, No. of C atoms Word root, No. of C atoms, Word root, C1, MethC7, HeptC2, EthC8, OctC3, PropC9, NonC4, ButC10, DecC5, PentC11, UndecC6, HexC12, Dodec+1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 44

Page 45 :
There are two types of suffixes – primary suffix and secondary suffix. Primary suffix indicates saturation or, unsaturation [for alkane the primary suffix is –ane, alkene –ene and for alkyne –yne]. Secondary suffix, indicates the type of functional group. Some functional groups are also indicated as prefixes., Nomenclature of branched chain alkanes:, A branch (side chain or substituent) is obtained by removing a hydrogen atom from an alkane. The, resulting group is called an alkyl group [alkane – H = alkyl (i.e. word root + yl)]. The names of some common, branches are as follows:, Branch, -CH3, -CH2-CH3, -CH2-CH2-CH3, (CH3)2CH-CH2-CH2-CH2-CH3, CH3-CH-CH2-CH3, , Name, Methyl, Ethyl, n-propyl (normal propyl), isopropyl, n-butyl, sec-butyl (secondary butyl), , (CH3)2CH-CH2(CH3)3C(CH3)3C-CH2-, , isobutyl, tert-butyl (tertiary butyl), neopentyl, , Rules for naming branched chain alkanes:, IUPAC recommenced the following rules for naming a branched chain alkane., 1. Select the longest continuous chain of carbon atoms. This chain is called parent chain or root chain. If, there is more than one such chain, the chain that contains maximum number of branches is selected, as the parent chain. Also identify all the branches or substituents., 2. Number the carbon atoms of the parent chain in such a way that the branched carbon atoms get the, lowest possible numbers., 3. The names of alkyl groups attached as branches are then prefixed to the name of the parent alkane, and position of the substituents is indicated by the appropriate numbers., 4. If different alkyl groups are present, they are listed in alphabetical order. In alphabetical order, the, prefixes iso- and neo- are considered to be the part of the fundamental name of alkyl group. The, prefixes sec- and tert- are not considered to be the part of the fundamental name., 5. If two or more identical substituent groups are present then their numbers are indicated by prefixes, like di (for 2), tri (for 3), tetra (for 4), penta (for 5) etc and the numbers are separated by commas., The number and word are separated by a hyphen. (The IUPAC name is written as a single word)., For example:, , 3-Ethyl-4,4-dimethylheptane, , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 45

Page 50 :
assigned number1 and then the direction of numbering is chosen such that the next substituent gets the, lowest number. The substituents are named in alphabetical order., Some examples are:, , When a benzene ring is attached to an alkane with a functional group, it is considered as substituent,, instead of a parent. The name for benzene as substituent is phenyl (C6H5-, also abbreviated as Ph)., Example:, CH2-CHCl-CH2-CH2OH, Br, , Br, , 3-Chloro-4-phenyl-1-butanol, , 2,3-Dibromo-1-phenylpentane, , Isomerism, The phenomenon of existence of two or more compounds having the same molecular formula but, different structural formula or spatial arrangement of atoms is known as isomerism. Such compounds are, called as isomers. Isomers have different physical and chemical properties. Isomerism can be broadly, classified into two –structural isomerism and stereo isomerism., , 1. Structural isomerism, Compounds having same molecular formula but different structural formula (arrangement of atoms) are, called structural isomers and the phenomenon is called structural isomerism. There are mainly four types of, structural isomerism:, a) Chain Isomerism: Isomers differ in carbon chain or skeleton are called chain isomers and the, phenomenon is called chain isomerism., E.g.: Pentane (C5H12), CH3-CH2-CH2-CH2-CH3, CH3-CH-CH2-CH3, CH3, n-pentane, CH3, CH3 C CH3, isopentane, (2-Methylbutane), , CH3, neopentane (2,2-Dimethylpropane), , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 50

Page 51 :
b) Position isomerism: Isomers which differ in the position of the substituent or side chain are called, position isomers and the phenomenon is called position isomerism., E.g. : Alcohol with molecular formula C4H10O may be 1-butanol or 2-butanol, CH3-CH2-CH2-CH2-OH, CH3-CHOH-CH2-CH3, 1-Butanol, 2-Butanol, c) Functional group isomerism: Isomers which differ in the functional group are called functional group, isomers and the phenomenon is called functional group isomerism. This isomerism is shown by, alcohols and ethers and aldehydes and ketones., E.g. compound with the molecular formula C2H6O may be an alcohol ethanol (CH3-CH2OH) or an, ether methoxy methane (CH3-O-CH3)., d) Metamerism: Isomers which differ in the carbon chain (alkyl groups) around the functional group are, called metamers and the phenomenon is called metamerism. It is commonly shown by ethers., E.g.: Ether with molecular formula C5H12O may be methoxybutane (CH3-O-CH2-CH2-CH2-CH3) or, ethoxypropane (CH3-CH2-O-CH2-CH2-CH3)., , 2. Stereo isomerism, Compounds having same molecular formula but different spatial arrangement of atoms are, called stereoisomers and the phenomenon is called stereoisomerism. They have same atom to atom, bond. There are two types of stereo isomerism – Geometrical isomerism and Optical isomerism., , QUALITATIVE ANALYSIS OF ORGANIC COMPOUNDS, An organic compound mainly contains carbon and hydrogen. Some compounds may also contain, oxygen, nitrogen, sulphur, halogens and phosphorus., Detection of Carbon and Hydrogen, Organic compound is heated with copper (II) oxide [CuO]. Carbon present in the compound is oxidised, to carbon dioxide and hydrogen to water. CO2 can be tested by passing through lime-water, which turns, milky and water can be tested with anhydrous copper sulphate, which turns blue., C + 2CuO ⎯⎯Δ → 2Cu + CO2, 2H + CuO ⎯⎯Δ → Cu + H2O, CO2 + Ca(OH)2 ⎯→ CaCO3↓ + H2O, Detection of Nitrogen, Nitrogen present in an organic compound is detected by “Lassaigne’s test”. Here the organic, compound is fused with metallic sodium in a fusion tube, so that N in the compound is converted to cyanide., Na + C + N ⎯⎯Δ → NaCN, It is then extracted by boiling with distilled water and then filtered. The filtrate is known as sodium fusion, extract., To a little of the sodium fusion extract, add freshly prepared ferrous sulphate (FeSO4) solution, heated to, boiling, cooled and acidified with dil. H2SO4. If Nitrogen is present, a blue or green coloration or precipitate, (ppt) is formed., , QUANTITATIVE ANALYSIS OF ORGANIC COMPOUNDS, The percentage composition of elements present in an organic compound is determined by the following, methods:, , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 51

Page 52 :
1. Estimation of Carbon and Hydrogen, Carbon and hydrogen are estimated by Liebig’s combustion method. In this method, a known mass of an, organic compound is burnt in the presence of excess of oxygen and copper(II) oxide. Then carbon is oxidised, to CO2 and hydrogen is oxidised to H2O., CxHy + (x + y/4) O2 ⎯→ x CO2 + (y/2) H2O, The water so produced is absorbed in a weighed U-tube containing anhydrous calcium chloride and carbon, dioxide is absorbed in another U-tube containing concentrated solution of potassium hydroxide. These tubes, are connected in series. The increase in masses of calcium chloride and potassium hydroxide gives the, amounts of water and carbon dioxide from which the percentages of carbon and hydrogen are calculated., Calculations:, Let the mass of organic compound be m g, mass of water and carbon dioxide produced be m1 and m2 g, respectively.Then,, Percentage of hydrogen = 2 x m1 x 100, 18 x m, Percentage of carbon = 12 x m2 x 100 %, 44 x m, , 13., , Hydrocarbons, , Organic compounds containing carbon and hydrogen atoms only are called hydrocarbons. Depending on, the types of C-C bond, they can be classified into three – saturated, unsaturated and aromatic hydrocarbons., Saturated hydrocarbons are also called alkanes. They contain only C-C single bonds. Unsaturated, hydrocarbons contain atleast one carbon-carbon double bond (alkene) or carbon-carbon triple bond, (alkyne). Aromatic hydrocarbons are a special type of cyclic compounds. They are also called arenes., , ALKANES, Alkanes are saturated open chain hydrocarbons containing carbon-carbon single bonds. They form a, homologous series. Their general molecular formula is CnH2n+2. In alkanes, all the C atoms are sp3 hybridised., So each C atom has a regular tetrahedral shape., Preparation of alkanes, 1. From unsaturated hydrocarbons: Alkenes and alkynes add Hydrogen in presence of finely divided, catalysts like Ni, Pd or Pt to form alkanes. This process is called hydrogenation., , 2. From alkyl halides, Wurtz reaction:, Alkyl halides react with metallic sodium in dry ether to form alkanes. This reaction is known as, Wurtz reaction., 2 R-X + 2Na dry ether R-R + 2NaX, Here the alkane formed contains double the number of C atoms than that present in the alkyl halide., So this method is used for the preparation of alkanes with even number of carbon atoms., , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 52

Page 53 :
When two different alkyl halides are used, we get a mixture of alkanes., Chemical Properties of alkanes, 1. Isomerisation: n-Alkanes on heating in the presence of anhydrous aluminium chloride and hydrogen, chloride gas isomerise to branched chain alkanes., CH3-(CH2)4-CH3 Anhydrous AlCl3/HCl CH3-CH-CH2-CH2-CH3 + CH3-CH2-CH-CH2-CH3, n-Hexane, CH3, CH3, 2-Methylpentane, 3-Methyl pentane, 2. Aromatization: n-Alkanes having six or more carbon atoms on heating to 773K at 10-20 atmospheric, pressure in the presence of oxides of vanadium, molybdenum or chromium supported over alumina,, we get aromatic compounds. This reaction is known as aromatization or reforming., CH3-(CH2)4-CH3 Cr2O3 or V2O5 or Mo2O3, n-hexane, 773K, 10-20 atm, Benzene, Conformations of Alkanes, Alkanes contain carbon-carbon sigma (σ) bonds. Since, electron distribution of the sigma bonds is, symmetrical around the bond axis, rotation around C–C bond is allowed. This rotation changes the spatial, arrangements of atoms attached to the C atoms. These different spatial arrangements of atoms arising due, to free rotation around a C-C single bond are called conformations or conformers or rotamers., Conformations of ethane, Ethane contains a C-C σ bond and each carbon atom contains three hydrogen atoms. Due to free, rotation of C atoms around the single bond, the spatial arrangement of hydrogen atoms attached to the C, atoms change. Thus ethane can show an infinite number of conformational isomers., If we fix one carbon atom and rotate the other, there arise two extreme cases called eclipsed and, staggered conformations., In eclipsed conformation, the hydrogen atoms attached to each carbon atoms are closed together as, possible. Or, here the hydrogen atoms of the 2nd carbon atoms are exactly behind that of the first., In staggered conformation, the hydrogen atoms are far apart as possible. Any conformations, between eclipsed and staggered conformations are called skew conformations., Staggered conformation is stabler than eclipsed form. This is because in staggered form, the electron, clouds of carbon-hydrogen bonds are very far apart. So there is minimum repulsive forces, minimum energy, and maximum stability. But in eclipsed form, the electron clouds are close to each other. So the repulsion is, maximum and the stability is minimum., Eclipsed and staggered conformations can be represented by Sawhorse and Newman projection formulas., 1. Sawhorse projections:, Here the molecule is viewed along the molecular axis. C–C bond is denoted by a longer straight line., The front carbon is shown at the lower end of the line and the back carbon is shown at the upper end. Each, carbon has three lines attached to it corresponding to three hydrogen atoms., Sawhorse projections of eclipsed and staggered conformations of ethane are as follows:, , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 53

Page 56 :
AROMATIC HYDROCARBONS (ARENES), Most of the aromatic compounds have pleasant smell (aroma means pleasant smelling) and most of, them contain benzene ring. Aromatic compounds containing benzene ring are called benzenoid compounds, and those which do not contain benzene ring are called non-benzenoid compounds., Preparation of Benzene, 1. Cyclic polymerisation of ethyne (acetylene):, 3 C2H2, Red hot iron tube & 873K C6H6, 2. Decarboxylation of aromatic acids: Sodium salt of benzoic acid on heating with sodalime gives, benzene., , 3. Reduction of phenol: Phenol is reduced to benzene by passing its vapours over heated zinc dust., , Chemical Properties, Electrophilic Substitution Reactions, These are reactions in which a weak electrophile is replaced by a strong electrophile. The important, electrophilic substitution reactions are Nitration, Sulphonation, Halogenation and Friedel-Crafts alkylation, and acylation., 1. Nitration: It is the introduction of nitro (-NO2) group to a benzene ring. For this benzene is heated, with a mixture of conc. HNO3 and conc. H2SO4 (nitrating mixture)., , 2. Friedel-Craft’s Alkylation reaction: It is the introduction of alkyl (-R) group to a benzene ring. Here, the reagents used are alkyl halide in presence of anhydrous AlCl3., , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 56

Page 57 :
14., , Environmental Chemistry, , Environmental chemistry deals with the study of the origin, transport, reactions, effects and fates of, chemical species in the environment., Tropospheric pollution, The presence of undesirable solid or gaseous particles in the lower layer of atmosphere (Troposphere) is, called tropospheric pollution., Global Warming and Greenhouse Effect, When the concentration of carbon dioxide in the atmosphere is above the normal level (0.03%), it, absorbs more infra-red radiation from the solar energy and hence the temperature of the earth’s, atmosphere increases. This is known as Green house effect. It results in global warming., The gases responsible for green house effect are called green house gases. They are CO2, methane,, water -vapour, chlorofluorocarbons (CFC’s), nitrous oxide and ozone., The adverse effects of global warming and green house effect, Due to global warming, the average global temperature will increase. This will lead to the melting of, polar ice caps and flooding of low lying areas all over the earth. Increase in the global temperature results in, the infectious diseases like dengue, malaria, yellow fever, sleeping sickness etc., Measures to reduce global warming, Global warming can be reduced by the following methods:, a) Reduce the burning of fossil fuels by minimizing the use of automobiles., b) Plant trees and encourage afforestation., c) Avoid burning of dry leaves, wood etc., d) Aware the public about the bad effects of global warming., Acid rain:, When the pH of the rain water drops below 5.6, it is called acid rain. Oxides of nitrogen and sulphur, (e.g. SO2 and NO2) are mainly responsible for acid rain., Harmful effects of acid rain, a) Acid rain is harmful for agriculture, trees and plants., b) It causes respiratory ailments and skin cancer in human beings and animals., c) It affects plants and animal life in aquatic ecosystem., d) It corrodes water pipes resulting in the dissolution of heavy metals into the drinking water., e) Acid rain damages buildings and other structures made of stone or metal (e.g. The Taj Mahal)., Measures to reduce acid rain, Acid rain can be reduced by the following methods:, a) Reduce the use of automobiles., b) Encourage the use of natural gas instead of coal., c) Catalytic converters must be used in motor vehicles to reduce the emission of CO and oxides of, Nitrogen to the atmosphere., d) Acidity of the soil can be reduced by adding powdered limestone., e) Aware the public about acid rain., +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 57

Page 58 :
Water Pollution, Biological Oxygen Demand (BOD), The amount of oxygen required by bacteria to break down the organic matter present in a certain, volume of a sample of water is called Biochemical Oxygen Demand (BOD). The amount of BOD in the water, is a measure of the amount of organic material in the water. Clean water would have BOD value of less than, 5 ppm whereas highly polluted water could have a BOD value of 17 ppm or more., Green Chemistry, Green chemistry (also called sustainable chemistry) is an area of chemistry focused on the design of, products and processes that minimize the use and generation of dangerous substances., Applications of Green Chemistry in day-to-day life, (i) Dry Cleaning of Clothes: Liquefied carbondioxide, with a suitable detergent is used for dry cleaning, clothes., (ii) Bleaching of Paper: Hydrogen peroxide (H2O2) with suitable catalyst is used for bleaching paper., (iii) Synthesis of Chemicals: Ethanal (CH3CHO) is now commercially prepared by one step oxidation of, ethene in the presence of ionic catalyst in aqueous medium., Ethene, Ethanal (Acetaldehyde), %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%, , +1 CHEMISTRY - Focus Area Notes Prepared by Anil Kumar K L, GHSS Ashtamudi, Kollam, , Page 58