Page 2 :
https://abdullahsurati.github.io/bscit, , 3, Oxford University Press is a department of the University of Oxford., It furthers the University’s objective of excellence in research, scholarship,, and education by publishing worldwide. Oxford is a registered trade mark of, Oxford University Press in the UK and in certain other countries., Published in India by, Oxford University Press, YMCA Library Building, 1 Jai Singh Road, New Delhi 110001, India, © Oxford University Press 2004, 2011, 2015, The moral rights of the author/s have been asserted., First Edition published in 2004, Third Edition published in 2015, All rights reserved. No part of this publication may be reproduced, stored in, a retrieval system, or transmitted, in any form or by any means, without the, prior permission in writing of Oxford University Press, or as expressly permitted, by law, by licence, or under terms agreed with the appropriate reprographics, rights organization. Enquiries concerning reproduction outside the scope of the, above should be sent to the Rights Department, Oxford University Press, at the, address above., You must not circulate this work in any other form, and you must impose this same condition on any acquirer., ISBN-13: 978-0-19-945749-6, ISBN-10: 0-19-945749-2, Typeset in Caslon Pro, by Anvi Composers, New Delhi 110063, Printed in India by Magic International (P) Ltd., Greater Noida, Third-party website addresses mentioned in this book are provided, by Oxford University Press in good faith and for information only., Oxford University Press disclaims any responsibility for the material contained therein., , https://abdullahsurati.github.io/bscit
Page 3 :
https://abdullahsurati.github.io/bscit, , About the Authors, , Meenakshi Raman is presently Professor and Head, Department of Humanities, and Social Sciences at the Goa campus of the Birla Institute of Technology and, Science (BITS), Pilani. She has several years of teaching experience and has, been teaching courses on professional and technical communication at various, levels., , Sangeeta Sharma is presently Associate Professor, Department of Humanities, and Social Sciences at BITS, Pilani. She is also the Coordinator of the Centre, for Women Studies and has been teaching courses on communication and, advertising at BITS, Pilani. Dr Sharma has several years of teaching experience, and has published several articles on communication., , https://abdullahsurati.github.io/bscit
Page 4 :
https://abdullahsurati.github.io/bscit, , Brief Contents, Preface to the Third Edition iii, Preface to the First Edition vi, Features of the Book viii, Detailed Contents xi, PART I: INTRODUCTION TO TECHNICAL COMMUNICATION, 1. Basics of Technical Communication, 2. Barriers to Communication, 3. Non-verbal Communication, , 3, 25, 39, , PART II: LISTENING AND SPEAKING, 4., 5., 6., 7., 8., 9., , Active Listening, Effective Speaking, Conversations and Dialogues, Formal Presentations, Interviews, Group Communication, , 53, 73, 98, 113, 140, 176, , PART III: READING AND WRITING, 10., 11., 12., 13., 14., 15., 16., , Reading Comprehension, Elements of Effective Writing, The Art of Condensation, Technical Reports, Technical Proposals, Formal Letters, Memos, and Email, Research Papers and Technical Descriptions, , 223, 252, 274, 284, 321, 349, 419, , PART IV: REVIEW OF GRAMMAR, 17. Grammar and Vocabulary Development, References 493, Index 495, About the Authors 499, https://abdullahsurati.github.io/bscit, , 437
Page 5 :
https://abdullahsurati.github.io/bscit, , Detailed Contents, Preface to the Third Edition iii, Preface to the First Edition vi, Features of the Book viii, Brief Contents x, , PART I: INTRODUCTION TO TECHNICAL COMMUNICATION, , 1. Basics of Technical Communication, , 3, , Introduction 3, Importance of Technical Communication 4, General and Technical Communication 4, Objectives and Characteristics of Technical, Communication, 5, Process of Communication 5, Communication Cycle 6, Levels of Communication 7, Extrapersonal Communication 7, Intrapersonal Communication 7, Interpersonal Communication 8, Organizational Communication 8, Mass Communication 9, Flow of Communication 9, Vertical Communication 10, Horizontal Communication 11, Diagonal Communication 11, Visual Aids in Technical Communication 12, Tables 14, Graphs 16, Charts 19, , Drawings and Diagrams, Photographs 21, Maps 22, , 19, , 2. Barriers to Communication, , 25, , 3. Non-verbal Communication, , 39, , Introduction 25, Noise 26, Classification of Barriers 27, Intrapersonal Barriers 27, Interpersonal Barriers 31, Organizational Barriers 34, , Introduction 39, Kinesics 40, Proxemics 44, Chronemics 45, Correlating Verbal and Non-verbal, Communication 46, Cross-cultural Variations 47, Significance of Understanding, Culture 48, , PART II: LISTENING AND SPEAKING, , 4. Active Listening, , Introduction 53, Meaning and Art of Listening 54, Importance of Listening and Empathy in, Communication 54, Reasons for Poor Listening 54, Listening versus Hearing 55, , 53, , Poor Listening Habits 55, Traits of a Good Listener 57, Being Non-evaluative 57, Paraphrasing 58, Reflecting Implications 58, Reflecting Hidden Feelings 58, Inviting Further Contributions 59, Responding Non-verbally 59, , https://abdullahsurati.github.io/bscit
Page 6 :
xii, , DETAILED CONTENTS, , https://abdullahsurati.github.io/bscit, , Listening Modes 60, Active versus Passive Listening 60, Global versus Local Listening 62, Types of Listening 63, Barriers to Effective Listening 65, Listening for General Content and Specific, Information 67, Listening and Note-taking 68, Intensive Listening 69, , 5. Effective Speaking, , Introduction 73, Basic Sounds of English 73, Vowels and Consonants 74, Phonetic Transcription 78, Rules of Pronunciation 79, Problem Sounds 80, Word Stress 81, Weak Forms 82, Sentence Stress 83, Sentence Rhythm 84, Intonation 85, General Uses of Tone I and Tone II 86, Achieving Confidence, Clarity, and, Fluency 89, Confidence 89, Clarity 90, Fluency 91, Vocal Cues 92, Quality 92, Volume 93, Pace/Rate 93, Pitch 93, Articulation 94, Pronunciation 94, Voice Modulation 94, Pauses 95, , 6. Conversations and Dialogues, , Introduction 98, Conversations 99, Types of Conversation 99, Strategies for Effectiveness 100, Conversation Practice 104, Telephonic Conversations and, Etiquette 105, Telephonic Conversation Practice, Dialogue Writing 108, Situational Dialogues 109, , 108, , 73, , 98, , 7. Formal Presentations, , 113, , 8. Interviews, , 140, , 9. Group Communication, , 176, , Introduction 113, Planning, 114, Occasion 114, Audience 115, Purpose 116, Thesis Statement 117, Material 117, Outlining and Structuring 118, Introduction 119, Main Body 121, Conclusion 124, Nuances of Delivery 124, Modes of Delivery 125, Guidelines for Effective Delivery 128, Controlling Nervousness and Stage, Fright 132, Strategies for Reducing Stage Fright 132, Visualization Strategies 133, On-camera Techniques 133, Visual Aids in Presentations 133, Application of MS PowerPoint 135, Slide Preparation 136, Slide Show Animations 137, , Introduction 140, Objectives of Interviews 140, Types of Interviews 141, Job Interviews 143, Stages of Interview* 144, Face-to-face Interviews: Campus and On, Site 145, Telephonic Interviews 156, Résumés 160, Résumé, Biodata, and Curriculum, Vitae 160, Résumé Design and Structure 161, Types of Résumés 163, Scannable Résumés 164, Non-traditional Résumés 169, Media Interviews 171, Press Conferences 172, Preparation 173, Process 173, Introduction 176, Forms of Group Communication 177, , https://abdullahsurati.github.io/bscit
Page 7 :
https://abdullahsurati.github.io/bscit, , DETAILED CONTENTS, , Effective Intervention 189, Reaching a Decision 190, Organizational GD 190, Brainstorming 191, Nominal Group Technique 191, Delphi Technique 191, GD as Part of Selection Process 192, Characteristics 192, Evaluation and Analysis 193, Approach to Topics and Case Studies 197, Meetings 198, Purposes 199, Preparation 200, Procedure—Conducting Effective, Meetings 204, Conferences 210, Significance 210, Planning and Preparation 211, Procedure 212, Symposia and Seminars 213, Brochure 214, Bulletin 214, Newsletter 216, , Use of Body Language in Group, Communication 178, Discussions 180, Introducing Oneself/Others 181, Leading and Directing Discussions 181, Expressing Opinions and Ideas 181, Expressing Agreement/, Disagreement 182, Decisions and Intentions 182, Raising Questions 182, Giving and Receiving Effective, Feedback 183, Discussing and Delivering Negative, News 183, Counselling 184, Concluding 184, Group Discussions 185, Speaking in Group Discussions 185, Discussing Problems and Solutions 186, Creating a Cordial and Cooperative, Atmosphere 187, Using Persuasive Strategies 187, Being Polite and Firm 188, Turn-taking Strategies 188, , PART III: READING AND WRITING, , 10. Reading Comprehension, , 223, , Introduction 223, Improving Comprehension Skills 223, Techniques for Good Comprehension 224, Skimming and Scanning 224, Non-verbal Signals 224, Structure of the Text 225, Structure of Paragraphs 225, Punctuation 225, Author’s Viewpoint (Inference) 226, Reader Anticipation: Determining the, Meaning of Words 227, Summarizing 227, Typical Reading Comprehension, Questions, 228, Predicting the Content 230, Understanding the Gist 232, SQ3R Reading Technique 233, Study Skills 235, Note-making 235, Understanding Discourse Coherence 238, , Sequencing of Sentences, , 241, , 11. Elements of Effective Writing, , Introduction 252, Right Words and Phrases 252, Use Familiar Words 252, Use Concrete and Specific Words 253, Use Acronyms and Abbreviations, Sparingly 254, Avoid Clichés 256, Avoid Excessive Use of Jargons 256, Avoid Foreign Words and Phrases 257, Avoid Redundancy and, Circumlocution 257, Avoid Discriminatory Writing 258, Sentences 258, Sentence Patterns 259, Salient Points of Sentence, Construction 260, Writing for the Web 267, Clarity of Purpose 268, Audience Awareness 268, , https://abdullahsurati.github.io/bscit, , 252, , xiii
Page 8 :
xiv, , DETAILED CONTENTS, , Planning Content 268, Effective Style of Writing, Formatting 269, Proofreading 269, , 12. The Art of Condensation, , https://abdullahsurati.github.io/bscit, , 269, , Introduction 274, Steps to Effective Précis Writing 275, Guidelines 275, Samples 277, Original Text 1 277, Original Text 2 278, Original Text 3 279, , 13. Technical Reports, , 274, , 15. Formal Letters, Memos, and Email 349, , 284, , Introduction 284, Importance of Reports 285, Objectives of Reports 286, Characteristics of a Report 286, Categories of Reports 288, Informative Reports 288, Analytical Reports 288, Periodic and Special Reports 288, Oral and Written Reports 289, Long and Short Reports 289, Formal and Informal Reports 290, Individual and Group Reports 290, Formats 290, Prewriting 294, Purpose and Scope 294, Audience 294, Sources of Information 296, Organizing the Material 297, Interpreting Information 297, Making an Outline 297, Structure of Reports (Manuscript Format), 301, Prefatory Parts 302, Main Text 308, Supplementary Parts 311, Types of Reports 312, Writing the Report 314, First Draft 314, Revising, Editing, and Proofreading 315, , 14. Technical Proposals, , Introduction 321, Definition and Purpose 322, Types 322, , Characteristics 323, Structure of Proposals 324, Prefatory Parts 325, Body of the Proposal 326, Supplementary Parts 328, Style and Appearance 328, Evaluation of Proposals 328, , 321, , Introduction 349, Formats of Written Correspondence, 349, Types of Messages 350, Letter Writing 352, The Seven Cs of Letter Writing 352, Significance 352, Purpose 352, Structure 353, Layout 358, Principles 362, Planning a Letter 367, Business Letters 368, Credit Letters 369, Collection Letters 373, Letters of Enquiry 375, Order Placement Letters 377, Claim Letters 377, Sales Letters 381, Instruction Letters 386, Cover Letters 387, Writing the Cover Letter 387, Academic and Business Cover Letters 387, Cover Letters Accompanying Résumés 389, Memos 392, Classification and Purpose 395, Structure and Layout 396, Style 400, Emails 401, Advantages and Limitations 404, Style, Structure, and Content 405, Email Etiquette 407, Effectiveness and Security 411, , 16. Research Papers and Technical, Descriptions, Introduction 419, Research Paper 420, Characteristics 420, Components 421, Technical Description 427, , https://abdullahsurati.github.io/bscit, , 419
Page 9 :
https://abdullahsurati.github.io/bscit, , Guidelines for Writing Good, Descriptions 427, Checklist 428, Writing Technical Descriptions, , DETAILED CONTENTS, , Process Description 431, Object Description: Dual-option, Burner System 431, Process Description: Natural Waters 433, , 428, , PART IV: REVIEW OF GRAMMAR, , 17. Grammar and, Vocabulary Development, , 437, , Introduction 437, A Brief History of Words 438, Using the Dictionary and Thesaurus 441, Changing Words from One Form to, Another 442, Word Formation: Prefixes and Suffixes 442, Synonyms and Antonyms 443, Synonyms 443, Antonyms 444, Idioms 444, Confusables 445, One-word Substitutes 446, Homonyms 449, Homophones 449, Eponyms 450, Phrasal Verbs 451, Phrasal Verb Patterns 451, Nouns 453, Compound Nouns 454, Noun Phrases 454, Gerunds 456, Uses of Gerunds 457, Infinitives 458, Uses of Infinitives 459, , References 493, Index 495, About the Authors, , Subject–verb Agreement 460, Tenses 462, Present Tense 462, Past Tense 465, Future Tense 466, Active and Passive Voice 468, Conditional Sentences 469, Adjectives and Degrees of Comparison 473, Types of Adjectives 474, Comparison of Adjectives 475, Adverbs 477, Adverbs and Adjectives with the, Same Form 477, Adverbs with Two Forms 477, Adverb Forms 478, Adverbs as Intensifiers, 478, Kinds of Adverb 478, Conjuctions 479, Conjunction Classes, 480, Conjunctions Used in Adverbial, Phrases and Clauses 481, Prepositions 482, Articles 483, Indefinite Articles 484, Definite Article 484, Omission of Articles 485, , 499, , https://abdullahsurati.github.io/bscit, , xv
Page 10 :
xvi, , DETAILED CONTENTS, , https://abdullahsurati.github.io/bscit, , ONLINE RESOURCES, , CD CONTENTS, , For Faculty, , Videos, Interviews, Group discussion, Professional presentation, Listening and Speaking Practice, PowerPoint Presentations, Body language, Listening, Interviews, Group discussion, Text Supplements, , PowerPoint Slides, , For Students, , Additional Text, Multiple-choice Questions, Body language, Pronunciation, Interviews, Group discussion, Flash card Glossary, , https://abdullahsurati.github.io/bscit
Page 12 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 1, , OBJECTIVES, You should study the chapter, to know, , • the importance of technical, communication, , • how general-purpose, , communication is, different from technical, communication, • the objectives and, characteristics of technical, communication, • the constituents of the, communication process, • the different levels of, communication, • how communication flows in, an organization, • how and why visual aids, are used in technical, communication, , Basics of Technical Communication, , INTRODUCTION, In the academic environment, we encounter various situations involving, speech or writing: conversation with friends, professors, or colleagues to, achieve various purposes; seminars, group discussions, written tests, and, examinations; and laboratory or project report submissions on diverse, topics. Likewise, at the workplace, we interact with superiors and, subordinates, converse with them face-to-face or over the telephone,, and read and write emails, letters, reports, and proposals., All these activities have a common denominator—the sharing of, information. For example, when you request your professor to explain, a concept you could not understand very well in class, you transmit, the information to him/her that you need some clarification. Now, the, professor receives this information, understands it, and responds by, giving an explanation which clears your doubt. If you are satisfied with, this explanation, you thank the professor and the communication comes, to an end. If you are still in doubt, you once again request clarification,, and the process continues. This process involving the transmission and, interchange of ideas, facts, feelings, or courses of action is known as the, process of communication. We give, get, or share information with others, during this process. Whether the communication is oral or written, this, process essentially remains the same., When one becomes a part of any organization, one needs to, communicate, and communicate effectively. No organization can survive, without communication. All the activities an organization undertakes, have communication at their hub. The better our communication, skills, the greater are our chances of quick progress. However skilful, one may be in other aspects such as work, knowledge, thoughts, and, organization, without proper communication, those are of little use. For, instance, though you may have an excellent academic record, you may, not be successful in an interview if you are not able to express your ideas, clearly to those on the other side of the table. It has been observed that, https://abdullahsurati.github.io/bscit
Page 13 :
4, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , people who are successful in their careers generally have excellent communication skills, which, is one of the very reasons for their success. Most of this is technical communication, so let us find, out more about what role technical communication plays in an organization., , IMPORTANCE OF TECHNICAL COMMUNICATION, Technical communication plays a pivotal role in any set-up, whether it is a business enterprise,, an industry as a whole, or an academic institution. All managerial or administrative activities, involve communication, be it planning, organizing, recruiting, coordinating, or decision-making., When you write reports, give instructions, or read brochures and manuals, you are involved in, the process of communication. Communication serves as an instrument to measure the success, or growth of an organization. For example, papers published by R&D organizations bring to, light their progress. When the chief executive officer (CEO) of an organization presents his/, her company’s achievements in a meeting, each of the participants comes to know of these, milestones. The higher one’s position is, the greater is their need to communicate. A labourer,, for example, may not be as involved in formal communication as a top-level executive. The, various types of communication not only help an organization to grow, but also enable the, communicators to develop the required skills., However, though most professionals are well aware of the importance of communication,, they do not develop their skills to good effect in their sphere of work. The more people, participate in the communication process, the better they develop their skills in collecting and, organizing information, analysing and evaluating facts, appreciating the difference between, facts and inferences, and communicating effectively. To become an effective communicator, one, needs to communicate, communicate, and communicate. There is no other way out., , GENERAL AND TECHNICAL COMMUNICATION, Communication is important not only in an organization but also in one’s daily life. It is an, integral part of daily activity. When an alarm clock goes off, it is communication through sound,, urging one to get out of bed. When one feels loyal towards a particular brand of toothpaste,, it is possible that the television (TV) commercials for that brand have been successful in, communicating the message. Watching news on TV, saying goodbye to one’s family, or calling, a cab and giving directions are all different types of communication. At the workplace, all, activities revolve around oral or written communication. Interacting with one’s boss, reading, the newspaper at home, or even dreaming in one’s sleep are all examples of communication., , https://abdullahsurati.github.io/bscit
Page 14 :
https://abdullahsurati.github.io/bscit, , BASICS OF TECHNICAL COMMUNICATION, , TABLE 1.1 Differences between general and technical communication, , General communication, , Technical communication, , •, •, •, •, •, •, , •, •, •, •, •, •, , Contains a general message, Informal in style and approach., No set pattern of communication., Mostly oral., Not always for a specific audience., Does not involve the use of technical vocabulary or, graphics, etc., , Contains a technical message, Mostly formal, Follows a set pattern, Both oral and written, Always for a specific audience, Frequently involves jargon, graphics, etc., , Messages that are non-technical or informal in nature are categorized as general-purpose, communication, whereas messages pertaining to technical, industrial, or business matters, belong to the category of technical or business communication. Table 1.1 shows the differences, between the two categories., , OBJECTIVES AND CHARACTERISTICS OF TECHNICAL COMMUNICATION, Technical communication takes place when professionals discuss a topic with a specific purpose, with a well-defined audience. Technical communication usually has the following objectives:, • To provide organized information that aids in quick decision-making, • To invite corporate joint ventures, • To disseminate knowledge in oral or written form, , Let us take an example of a customer who has bought a washing machine and does not, know how to use it. The customer reads the instructions in the user manual and gradually, learns to operate the washing machine without any assistance. This is an example of successful, technical communication. When you are confused about which camera to buy, the salesperson, explains all the technical features of each model to you. If that helps in your buying decision, it, is successful technical communication again., Technical communication has to be correct, accurate, clear, appropriate, and to the point., Correct information is objective information. The language should be clear and easy to, understand. If the communication is through a user manual for a phone, remember that people, will usually never use it unless they are stuck. And if they are stuck, they will look for instant, information to solve their problem. The information must be brief and arranged sequentially so, that it is easy for a user to find relevant information. It is also vital that the technical information, provided in the manual be accurate., , PROCESS OF COMMUNICATION, Communication can be, defined as the exchange, of information, ideas,, and knowledge between, a sender and a receiver, through an accepted code, of symbols., , For sharing information, two parties are required—the sender and the, receiver—without whom communication, which is an interactive process,, cannot take place. At any given time, one is active and the other is passive., However, this is not sufficient; there should also be cooperation and, understanding between them. Through what they have to communicate,, the sender and receiver mutually influence each other. They should have, a mutually accepted code of signals making up a common language. So,, https://abdullahsurati.github.io/bscit, , 5
Page 15 :
6, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , FIGURE 1.1 The process of communication, , communication can be defined as the exchange of information, ideas, and knowledge between, a sender and a receiver through an accepted code of symbols. It is termed effective only when, the receiver receives the message intended by the sender in the same perspective. Otherwise it, becomes miscommunication., , Communication Cycle, Consider the communication process shown in Figure 1.1. The communication cycle involves, various elements, as discussed in the following paragraphs., The first step is formulation, wherein the sender forms the content of the message to be sent., This formulation depends on the level of experience, intelligence, knowledge, and purpose of, the sender. The content, once formed, is called the message. The sender encodes the message, using a basic tool. This tool is nothing but the language used—words, actions, signs, objects, or a, combination of these. Once encoded using proper language, the message is ready to be delivered., This delivery happens through channels or media of communication. It can be face-to-face, on, paper, or through electronic or digital media such as the Internet. The receiver receives the, message, decodes it, and acts on it. If the message received is the same as the message sent, there, will be an appropriate response; if not, there will still be a response, but probably an inappropriate, or unexpected one, as there has been a breakdown or interference in the communication. This, may happen because of noise, which has been discussed in detail in Chapter 2. Noise affects the, decoding part of the communication process., The transmission of the receiver’s response to the sender is called feedback. Feedback is essential,, as it measures the effectiveness of communication. When a message is sent, the communication, cycle is complete only when there is a response from the recipient of the, message. Otherwise, the message needs to be re-sent. When a response, ‘How well we, communicate is, is received, the message has been successfully delivered to the other party., determined not by, For example, you put up a notice asking the members of your student, how well we say things,, council to attend a meeting on a specified date, at a particular time, at the, but how well we are, location mentioned. On the day of the meeting, you find that some of, understood.’, them have come while the others have not turned up. In this case you have, –Andrew Grove, obtained both positive and negative responses to your message. However,, https://abdullahsurati.github.io/bscit
Page 16 :
https://abdullahsurati.github.io/bscit, , BASICS OF TECHNICAL COMMUNICATION, , since you have got some feedback, the communication process is complete. You also know that, it has been effective, at least from your side. Hence, to know whether the communication has, been successful or not, there must be some feedback, which is nothing but an observation of, the recipient’s response. The communication is fully effective only when there is a desired response, from the receiver., Effective communication takes place in a well-defined set-up. This is called the communication, environment. A classroom is the communication environment when a teacher delivers lectures, to students. If such a communication is attempted without a proper environment, it will not, have the desired effect. Similarly, a teacher’s cubicle becomes the communication environment, when a student privately approaches the teacher. Thus, the essentials of effective communication, are as follows:, • A well-defined communication environment, • Cooperation between the sender and the receiver, • Selection of an appropriate channel, • Correct encoding and decoding of the message, • Feedback, , LEVELS OF COMMUNICATION, Having understood the communication process, let us now study the various levels at which, human communication takes place:, • Interpersonal, • Organizational, , • Extrapersonal, • Intrapersonal, • Mass, , Extrapersonal Communication, Communication between human beings and nonhuman entities is extrapersonal. For example,, when your pet dog comes to you wagging its, tail as soon as you return home from work, it is, an example of extrapersonal communication., A parrot responding to your greeting is another, example. More than any other form, this form, of communication requires perfect coordination, and understanding between the sender and the, receiver because at least one of them transmits, information or responds in sign language only., , Intrapersonal Communication, Intrapersonal communication takes place within an individual. We know that the brain is, linked to all parts of the body by an electrochemical system. For example, when you begin, to ‘feel hot’, this information is sent to the brain and you may decide to ‘turn on the cooler’,, responding to instructions sent from the brain to the hand. In this case, the relevant organ is, the sender, the electrochemical impulse is the message, and the brain is the receiver. Next, the, brain assumes the role of sender and sends the feedback that you should switch on the cooler., This completes the communication process. This kind of communication pertains to thinking,, https://abdullahsurati.github.io/bscit, , 7
Page 17 :
8, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , which is the basis of information processing. Without such internal dialogue, one cannot, proceed to the further levels of communication—interpersonal and organizational. In fact,, while we are communicating with another party, our internal dialogue with ourselves continues, concurrently—planning, weighing, considering, and processing information. You might have, noticed that at times you motivate yourself or consciously resolve to complete a certain task., Self-motivation, self-determination, and the like take place at the intrapersonal level., , Interpersonal Communication, Communication at this level refers to the sharing of information among people. To compare, it with other forms of communication, such as intrapersonal, organizational, etc., we need to, examine how many people are involved, how close they are to one another physically, how many, sensory channels are used, and the feedback provided., Interpersonal communication differs from other forms of communication in that there are few, participants involved, they are in close physical proximity to each other, many sensory channels are, used, and feedback is immediate. Also, the roles of the sender and receiver keep alternating. This, form of communication is advantageous because direct and immediate feedback is possible. If, a doubt occurs, it can be instantly clarified. Note that non-verbal communication plays a major, role in the interpretation of a message in this form of communication due to the proximity of, the people involved., Interpersonal communication can be formal or informal. For example, your interaction with a, sales clerk in a store is different from that with your friends and family members; the interaction, between the panel members and the candidate appearing at an interview is different from the, conversation between two candidates waiting outside. Hence, depending upon the formality of, the situation, interpersonal communication takes on different styles., Moreover, most interpersonal communication situations depend on a variety of factors, such, as the psychology of the two parties involved, the relationship between them, the circumstance, in which the communication takes place, the surrounding environment, and finally the cultural, context., , Organizational Communication, Communication in an organization takes place at different hierarchical levels. As we have, learnt, it is extremely necessary for the sustenance of any organization. Since a large number, https://abdullahsurati.github.io/bscit
Page 18 :
https://abdullahsurati.github.io/bscit, , BASICS OF TECHNICAL COMMUNICATION, , of employees are involved in several different activities, the need to communicate effectively, becomes greater in an organization. With a proper networking system, communication in, an organization is possible even without direct contact between employees. Organizational, communication can be further divided into the following., Internal-operational All communication that occurs in the process of operations within an, organization is classified as internal-operational., External-operational The work-related communication that an organization has with people, outside the organization is called external-operational communication., Personal All communication in an organization other than that for business or official, purposes is called personal communication., We will learn more about communication in organizations later in this chapter., , Mass Communication, Mass communication is meant for large audiences and, requires a medium to transmit information. There are, several mass media such as journals, books, television,, and newspapers. The audience is heterogeneous and, anonymous, and thus the approach is impersonal., Press interviews given by the chairman of a large firm,, advertisements for a particular product or service, and, the like take place through mass media. This type of, communication is more persuasive in nature than any, other form, and requires utmost care on the part of the, sender while encoding the message. Oral communication, through mass media requires equipment such as microphones, amplifiers, etc., and the written form, needs print or visual media. The characteristics of mass communication are as follows:, Large reach Mass communication has the capacity to reach audience scattered over a wide, geographical area., Impersonality Mass communication is largely impersonal, as the participants are unknown, to each other., Presence of a gatekeeper Mass communication needs additional persons, institutions, or, organizations to convey the message from a sender to a receiver. This ‘gatekeeper’ or mediator, could be a person or an organized group of persons active in transferring or sending information, from the source to the target audience through a mass medium. For example, in a newspaper,, the editor decides which news makes it to the hands of the reader. The editor is therefore the, gatekeeper in this mass communication process., , FLOW OF COMMUNICATION, Information flows in an organization both formally and informally. Formal communication, refers to communication that follows the official hierarchy and is required to do one’s job. In other, words, it flows through formal channels—the main lines of organizational communication., Internal-operational and external-operational communication is formal. In fact, the bulk of, communication that a business needs for its operations flows through formal channels. For, https://abdullahsurati.github.io/bscit, , 9
Page 19 :
10, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , Managing Director, , Director 1, , Manager 1 Manager 2, , Director 2, , Manager 3, , Manager 1, , Lateral/Horizontal, , Director 3, , Manager 2, , Manager 3, , Diagonal, , Manager 1, , Downward, , Manager 2, , Manager 3, , Upward, , FIGURE 1.2 Flow of communication in an organization, , example, when a manager instructs a subordinate on some matter or when an employee, brings a problem to a supervisor’s attention, the communication is formal. Similarly, when, two employees interact to discuss a customer’s order, the communication is formal. Information, of various kinds flowing through formal channels, such as policy or procedural changes, orders,, instructions, and confidential reports, is formal communication. Formal communication can, flow in various directions—vertical, lateral, or diagonal—as shown in Figure 1.2., , Vertical Communication, Figure 1.2 shows that communication can flow in any direction in an organization. Vertical, communication consists of communication up and down the organization’s chain of, command. Vertical communication can be classified as downward communication and upward, communication according to the direction of its flow., , Downward communication, Downward communication flows from a manager down the chain of command. When managers, inform, instruct, advise, or request their subordinates, the communication flows in a downward pattern., This is generally used to convey routine information, new policies or procedures, seek clarification,, ask for an analysis, etc. People also send feedback, to their subordinates on their actions through this, channel. Downward communication can take, any form—emails, memos, notices, face-to-face, interactions, or telephone conversations. However,, it should be adequately balanced by an upward, flow of communication., Upward communication, When subordinates send reports to inform, their superiors, or to present their findings and, recommendations to their superiors, communication flows upward. Upward communication, https://abdullahsurati.github.io/bscit
Page 20 :
https://abdullahsurati.github.io/bscit, , BASICS OF TECHNICAL COMMUNICATION, , keeps managers aware of the business operations as well as of how employees feel about their, jobs, colleagues, and the organization in general. Managers also rely on upward communication, for making certain decisions or solving problems concerning the organization., The extent of upward communication, especially that initiated at the lowest level, depends on, the organizational culture. In an open culture without too many hierarchical levels, i.e., in a flat, structure, managers are able to create a climate of trust and respect, and implement participative, decision-making or empowerment. In such an environment, there will be a considerable amount, of upward communication. This happens mainly because the employees provide the input for, managerial decisions. In a highly authoritative environment, where downward flow dominates,, upward communication still takes place but is limited to the managerial ranks. Suggestion boxes,, employee attitude surveys, grievance procedures, superior–subordinate decisions (decisions, taken for the subordinate by his/her superior), review reports, statistical analyses, etc. provide, restricted information to top management., , Horizontal Communication, Horizontal or lateral communication takes place among peer groups or hierarchically equivalent, employees, i.e., employees at the same seniority level. Such communication is often necessary, to facilitate coordination, save time, and bridge the communication gap among various, departments. Occasionally, these lateral relationships are formally sanctioned. But generally,, they are informally created to bypass the formal hierarchical channels and expedite action., From the organization’s point of view, lateral communication can be either advantageous or, disadvantageous. As compared to vertical (downward or upward) communication, which can, at times hold up and delay timely and accurate transfer of information, lateral communication, can be beneficial. Nevertheless, they can also create conflicts when formal vertical channels are, bypassed by employees in order to accomplish their goals, or when superiors find out that they, had not been consulted before certain decisions were taken., Lateral communication enables the sharing of information with a view to apprise the peer, group of the activities of a department. The Vice President (Marketing) sending some survey, results in the form of a memo to the Vice President (Production) for further action is an example, of lateral communication. This type of communication is vital for the growth of an organization, as it builds cooperation among the various branches. It plays a greater role in organizations where, work is decentralized, because there is a higher probability of communication gaps in such set-ups., , Diagonal Communication, Diagonal or cross-wise communication flows in all directions and cuts across the various functions, and levels in an organization. For example, when a sales manager communicates directly with, the Vice President (Production), who is not only in a different division,, but also at a higher level in the organization, they are engaged in diagonal, ‘A coordinated flock of, birds or a shoal of fish, communication. Though this form of communication deviates from the, maintain their relative, normal chain of command, there is no doubt that it is quick and efficient., positions, or alter direction, In some situations, ignoring vertical and horizontal channels expedites, simultaneously due to, action, and prevents other employees from being used merely as messengers, lateral communication, between, the actual senders and receivers., amongst members; this, The increased use of email also encourages cross-wise communication., is achieved due to tiny, pressure variations.’, Any employee can communicate via email with another employee,, –Wikipedia, regardless of the receiver’s function or status. Since there is no specific, https://abdullahsurati.github.io/bscit, , 11
Page 21 :
12, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , line of command, diagonal communication is also referred to as cross-wise, radial, or circular, communication, depending upon the structure of the organization. For instance, a managing, director could directly call a supervisor and give instructions., , VISUAL AIDS IN TECHNICAL COMMUNICATION, Visual aids are an important part of written technical communication., You might have observed that most technical reports, whether they are, laboratory reports, project reports, or feasibility reports, include illustrations, such as tables, graphs, maps, diagrams, charts, or photographs. In fact, text, and illustrations are complementary in technical communication. Visual, aids are also used extensively in presentations, to support the facts and, figures being presented. Graphics can be used to represent the following, elements in technical writing., , An illustration is a visual, representation such, as a drawing, painting,, photograph, or other work, of art that stresses subject, more than form., , Concepts, This element depicts non-physical, conceptual things and their relationships. If you want to show, how your company is organized, that is, the relationships between the different departments, and officials, you could set up an organization chart—boxes and circles connected with lines, that show how everything is hierarchically arranged and related. This is an example of a graphic, depicting a concept., Objects, Photographs, drawings, diagrams, and schematics are the types of graphics that show objects., If you are describing a fuel-injection system, you will probably need a drawing or diagram to, explain the system properly. If you are explaining how to graft a fruit tree, you will need some, illustrations of how it is done., Numbers, Numbers are used while presenting data and statistics. If you are discussing the rising cost of, housing in a particular city, you could use a table, with the columns showing the data for fiveyear periods since 1995. The rows could be for different types of housing. You could show the, same data in the form of bar charts, pie charts, or line graphs., Words, Graphics are also used to depict words. You have probably noticed how textbooks put key, definitions and examples in boxes with words., To further understand visual aids, let us answer the following questions:, • When to use?, • Why to use?, • How to use?, • What are the types?, When Illustrations are very effective when there is a mass of statistics and complex ideas to, be represented. Statis-tical data is best explained through tables, graphs, charts, maps, diagrams,, or photographs. As already mentioned, text and illustrations are complementary in technical, communication. Hence, whenever the information to be communicated is too complicated or, https://abdullahsurati.github.io/bscit
Page 22 :
https://abdullahsurati.github.io/bscit, , BASICS OF TECHNICAL COMMUNICATION, , technical to transmit just through words, we use, visual aids. However, they should not be used, just for the sake of using them., Why Visual communication has more impact, than verbal communication. Using illustra-tions, has many advantages:, •, •, •, •, , •, •, •, •, •, How, be, •, •, •, •, •, •, •, •, , Arouses interest and focuses on essentials, Leads the reader to quicker comprehension, Supports and reinforces words, Saves much time and effort in explaining and, interpreting complex ideas, Explains the data in much lesser space but with greater accuracy, Simplifies numerical data, Emphasizes and clarifies certain facts and relationships, Makes the descriptions vivid and eye-catching, Renders a professional flavour to the communication, , The following are some guidelines to use illustrations effectively. The illustrations should, neat, accurate, and self-contained, appropriate to the data, labelled completely, self-contained, integrated with the text, placed as close to the first reference as possible, sized appropriately so that they are clear even upon reproduction, such that they create a good balance between the verbal and the visual, , Types Figure 1.3 classifies the various types of illustrations. It is clear from this figure that, though there are various kinds of visual aids, they can be broadly classified into two main, categories, namely tables and figures. All illustrations other than tables are usually categorized, under figures., In the process of selecting and designing illustrations, the question of which type to use, always arises. Which type of illustration can be used most effectively to accomplish the desired, objective? What type will present the facts more clearly? Before these questions can be answered,, and before the actual work of selecting and designing the illustration can begin, the following, preliminary steps must be taken. First the material must be arranged in some sort of systematic, , FIGURE 1.3 Types of illustrations, , https://abdullahsurati.github.io/bscit, , 13
Page 23 :
14, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , order: a series, a distribution, or some other logical arrangement. Next, we must be thoroughly, familiar with the material and be aware of the implications of its use. The final step involves a, decision about the type of illustration to be used. Several factors are considered for a decision of, this kind, such as the nature of the data, the anticipated use, and the intended audience. These, factors are usually interrelated., The type of data will often aid in the selection of the appropriate type of media. For example,, if the data were quantitative in nature, the selection might be from one group of charts; if the, data were more qualitative in nature, the selection might be made from another group., The following pages provide samples of various types of illustrations and also briefly explain, the purpose for which each of these types is used., , Tables, A table is a systematic arrangement of numbers, words, or phrases in rows and columns, used to, depict original numerical data as well as derived statistics. It permits rapid access to and relatively, easy comparison of information. If the data is arranged chronologically (for example, sales figures, over a ten-year period), the table can show trends—patterns of rising or falling activity. Of course,, tables are not necessarily the most clear or vivid means of showing such trends or relationships, between data—that is why we have charts and graphs (discussed later in this chapter)., The most important use of tables is for presenting numerical data. Imagine that you are, comparing different models of laser printers in terms of physical characteristics such as height,, depth, length, weight, and so on—you can use a table in this case., Traditionally, the title of a table is placed on top of the table or in the first row of the table., If the contents of the table are obvious and there is no need to cross-reference the table from, anywhere else in the communication, the title can be omitted. To avoid complications, tables can, be considered as figures (the same as other graphics), and numbered within the same sequence., As shown in Figure 1.3, there are three types of tables:, • Dependent, • Independent, • Phrase, Dependent tables are those whose contents cannot be understood without going through, the text. This type is used for presenting less data (Figure 1.4). Independent tables are the, most commonly used ones. Though the text should explain each table, readers need not go, through the text to understand the contents of these tables (Figure 1.5). Phrase tables are, used when the data is in words or phrases instead of numerical figures (Figure 1.6)., , Advantages and disadvantages, The tabular form of presentation, while simple for the communicator, has both advantages, and disadvantages. A lot of numerical figures can be depicted through a table. A number of, TABLE I Details of inpatients admitted on 14.11.15, General ward, , 35, , Special ward, , 15, , Maternity ward, , 10, , FIGURE 1.4 Dependent table, https://abdullahsurati.github.io/bscit
Page 24 :
https://abdullahsurati.github.io/bscit, , BASICS OF TECHNICAL COMMUNICATION, , Style and Formatting Guidelines for Tables, • In the text just preceding the table, refer to the, table. Explain the general significance of the, data in the table; do not expect readers to figure, it out entirely for themselves., • Do not overwhelm readers with monster, 11-column, 30-row tables. Simplify the table data, down to just that amount of data that illustrates, your point—without, of course, distorting that, data., • Do not put the word or abbreviation for the unit, of measurement in every cell of a column. For, example, in a column of measurements all in, millimetres, do not put ‘mm’ after every number., , Put the common abbreviation in parentheses, along with the column or row heading., • Right- or decimal-align numbers in columns., If the two entries in a column are 123 and 4, 4, should be right below 3, not below 1., • When there is some special point you need to, make about one or more of the items in the, table, use a footnote instead of clogging up the, table with the information., • Most of the advanced word-processing software, packages, such as Word and WordPerfect, now, have table-generating tools. You do not have to, draw the lines and other formatting details., , TABLE II Fatal road accidents 2011–15 (% wise), Year, , Pedestrians, , Cyclists, , Others, , 2011, , 2380, , 830, , 1310, , 4520, , 19.7, , 2012, , 2315, , 850, , 1615, , 4780, , 20.8, , 2013, , 2255, , 805, , 1750, , 4810, , 20.9, , 2014, , 2460, , 750, , 2060, , 5270, , 22.9, , 2015, , 2050, , 735, , 800, , 3585, , 15.7, , Total, , 11460t, , 3970, , 7535, , 22965, , 100, , 50%, , 17%, , 33%, , 100%, , Percentage, , Total, , %, , FIGURE 1.5 Independent table, TABLE III, Goods, , Durability, , Nature/metal, , Availability, , Wires, , Long lasting, , Copper, , Freely, , Utensils, , Long lasting, , Steel, , Scarce, , FIGURE 1.6 Phrase table, , combinations are possible in the tabular form; for example, numeric and non-numeric data, can be depicted together. However, it also has certain disadvantages: while it is a part of visual, depiction, yet, visually, the details are not evident at a glance. Occasionally, the writer might, in, https://abdullahsurati.github.io/bscit, , 15
Page 25 :
https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , TABLE 1 Sales data for 2000–10, , Sales data for 2000–10, , Product B, , 25000, , 2000–01, , 20000, , 7000, , 2001–02, , 19899, , 7500, , 2002–03, , 20100, , 11000, , 2003–04, , 18500, , 13000, , 2004–05, , 15000, , 13500, , 2005–06, , 15500, , 13250, , 5000, , 2006–07, , 12000, , 15000, , 0, , 2007–08, , 10500, , 16500, , 2008–09, , 8000, , 19258, , 2009–10, , 8500, , 20136, , 20000, 15000, , 2009–10, , 2008–09, , 2006–07, , 2007–08, , 2005–06, , 2003–04, , 2004–05, , 2002–03, , 10000, , 2000–01, , Product A, , 2001–02, , Year, , Sales, , 16, , Year, Product A, , FIGURE 1.7 (a) Table presenting sales data for a, ten-year period, , Product B, , FIGURE 1.7 (b) Line graph showing the same data, , the process of putting in too much data, make it too detailed and complicated. Finally, there is, very little visual appeal in tables., , Graphs, Graphs are actually just another way of presenting the same data that is presented in tables—, in a more impressive and interesting way. At the same time, however, a chart or diagram, offers less detail or precision than tables. Figure 1.7 shows the difference between a table, [Figure. 1.7(a)] of sales figures for a 10-year period and a line graph [Figure. 1.7(b)] for the, same data. The graph presents a better sense of the overall trend but not the precise sales figure., , Producing graphs, As with illustrations, the following options are available for creating graphs: photocopying, from other sources, generating graphics using special software, and manually drawing original, graphics. Many spreadsheet application software packages (such as MS Excel) have fancy, features for generating graphs—once the data is fed and the format specified, the application, generates the required graph. Several types of graphs can be used. The various types are, rectilinear or line graph, bar graph, pie graph, scatter graph, pictorial graph, and surface graph., Line graphs Line graphs [Figure 1.8(a) and (b)] are used to show continuous change with, respect to time. For example, the increase, decrease, or no change in temperature along with, time can be depicted through a line graph. If two or three experiments have been conducted,, the three different readings can be depicted using three lines., Several trends (indicated by lines) over a specific period of time can be depicted by the line, graph, indicating trends over time and allowing easy comparisons. However, a little caution should, be exercised if the lines cross each other at points, as this can confuse the reader. Preferably, if there, are criss-crossing lines, only three variables should be plotted, as too many variables would prevent, the fine distinctions from being noticed, leading to erroneous conclusions., https://abdullahsurati.github.io/bscit
Page 26 :
https://abdullahsurati.github.io/bscit, , BASICS OF TECHNICAL COMMUNICATION, , FIGURE 1.8 Line graphs, , Bar graphs Bar graphs are effective in, emphasizing the comparison of various, data items. They can be used to depict the, quantity of different items during the same, period or the same item during different, periods., These are the simplest to construct, and very easy to understand. They could, be of various types: vertical with singular, or multiple bars stacked (Figure 1.9) or, comparative and horizontal. If these graphs, depict more than one variable, two colours or, designs are used to highlight the difference, between the two variables. These graphs are, comparative and if more than two variables, in terms of the same time frame are used,, a stacked vertical or horizontal bar graph, is used. The greatest advantage of these bar, diagrams is that they can also be used with, a three-dimensional effect., FIGURE 1.9 Bar graph with three variables, Presentations in this form are, advantageous as they have a convincing impact, and two or more variables can be stacked, without leading to difficulties in grasping the details. The colour and schematic designs added, to the bars lend visual appeal to these graphs. However, there could be a lack of precision in the, presentation of details, as the variables may become too cluttered and the lettering too small., Pie graphs Alternatively known as a percentage graph or circle graph, a pie graph is a circular, chart divided into sectors, illustrating proportion (Figure 1.10). In such type of graph, the arc, length of each sector (and consequently its central angle and area) is proportional to the quantity, https://abdullahsurati.github.io/bscit, , 17
Page 27 :
18, , TECHNICAL COMMUNICATION, , FIGURE 1.10 Pie graph, , https://abdullahsurati.github.io/bscit, , it represents. This is one of the most popular, forms used to depict the share of various, categories making up a certain quantity, and their correlations to the whole as a, percentage. If there is a need to emphasize, a particular segment, it is detached from, the pie and referred to as the floating wedge., Such a pie is referred to as an exploded pie., The pie graph captures the attention of, the reader more effectively than probably, any other presentation would. Within, one graph itself, the various segments can, be highlighted. In addition to the colour, pattern used, the categorization of the, segments can be given within, outside,, or alongside the graph. However, there, could be occasions when the difference is, very minor and it might get blurred; for, example, a segment depicting 0.5% may, become too small to notice. Hence, it is not, advisable to use pie graphs if the number, of variables in your data is more than five,, as it becomes difficult for the human eye, to detect the relative percentage of too, many cluttered items., , Scatter graph A scatter graph is used to, show the correlation between two variables., Usually, dots (•) or crosses (×) are used to, FIGURE 1.11 Scatter graph, represent the data. In scatter graphs, the, plotted data must lead to clusters. The absence, of clustering refers to the absence of correlation between the two items represented on the horizontal, and vertical axes. Notice the clustering at various places in the scatter graph given in Figure 1.11., Pictograms/pictorial graph Pictograms are similar to bar graphs, with figures or small pictures, plotted instead of bars. The pictures are chosen in accordance with the variables represented., This graph is self-explanatory; for example, if a graph were to indicate the population boom, in the last five years, human figures could be used, thus illustrating the point being made by, the writer. In such an example, a cluster of the figures or pictures would indicate an excessive, number during that period. This type of graph is not used extensively for business reports., The advantage of pictograms is that large numbers can be presented by a single cluster of figures., Much time and effort goes into the design of this graph so as to make it truly representative of, the situation it seeks to address. However, it is not very useful for business reports, which contain, more concrete data that cannot be represented pictorially. As pictograms are eye-catching, they, are suitable for magazines (Figure 1.12)., Area graphs Area graphs can be used to show how something changes over time. Usually, the, x axis represents the time period and the y axis represents the variable being measured. Area, https://abdullahsurati.github.io/bscit
Page 28 :
https://abdullahsurati.github.io/bscit, , FIGURE 1.12 Pictorial graph, , BASICS OF TECHNICAL COMMUNICATION, , graphs can be used to plot data that, has peaks (ups) and valleys (downs), or, data that was collected in a short time, period., These graphs also help to compare, trends over a period of time. For, example, when an area graph is plotted, to show the water consumption in a, particular educational campus, the total, consumption of water in that campus as, well as the consumption in individual, areas can be shown (see Figure 1.13)., While index lines are predominant, in line graphs, the area between the, lines is highlighted in an area graph., In addition, shades of colours are also, used. A darker shade is used at the bottom, and as, the plot goes higher and higher, the shades become, lighter. In Figure 1.13, the peak shows the total, water consumption in the campus., , Charts, There are two types of charts: organization charts, and flow charts., , Organization charts, Organization charts are generally used to, illustrate the various positions or functions of an, organization. Most of the communication channels, FIGURE 1.13 Area graph, in an organization are described through such, charts. These charts can also be used to depict the organization of various other ideas such as, the different sets of instructions given to subordinates or the different decisions taken for a, particular project. Figure 1.14 shows how different options can be organized in the form of an, organization chart., Flow charts, Flow charts present a sequence of activities from start to finish. They are normally used to, illustrate processes, procedures, and relationships. The various elements in the chart are generally, depicted through geometrical figures (Figure 1.15). Circular or oval boxes are used to indicate, the start or stop of the procedure, diamond-shaped boxes represent decision-making steps, and, rectangular boxes indicate processing steps. Arrows indicate the process, flow., Charts are often used, to make it easier to, understand large quantities, of data and the relationships, between different parts of, the data., , Drawings and Diagrams, In technical documents, drawings and diagrams are used to depict the, objects, processes, circuits, etc. that are being described. Diagrams can be, used to show the normal, sectional, or cut-away view of an object., https://abdullahsurati.github.io/bscit, , 19
Page 30 :
https://abdullahsurati.github.io/bscit, , BASICS OF TECHNICAL COMMUNICATION, , Drawings and photographs range from those showing minimal detail to those illustrating, maximal and minute details. For example, a simple line drawing of how to graft a fruit tree, reduces the detail to simple lines representing the hands, the tools, the graft stock, and the, graft. On the other hand, there can be complex diagrams showing a schematic view of systems;, for example, the wiring diagram of a clock radio, which hardly resembles the actual physical, system at all. These graphics with their gradations of detail have varying uses., In instructions, simple drawings (often called line drawings because they use just lines,, without other detail such as shading) are the most common. They simplify the explanations and, the objects so that the reader can focus on the key details. In descriptions, detailed drawings, are used, including those with shading and depth perspectives. Figures 1.16 and 1.17 show, examples of technical drawings., Several application software programs as well as the Internet provide clip arts, which are, pre-made images of fairly common objects such as computers and telephones. These images can, be used in technical documents along with suitable labels. Figure 1.18 shows some examples of, clip art available in MS Word., , One difference between, photography and other, forms of graphics is that a, photographer, in principle,, just records a single, moment in reality, with, seemingly no interpretation., , Photographs, Photographs are often used in feasibility, recommendation, and evaluation, reports. For example, if you are recommending a photocopier, or if you, want to compare various cars, automated teller machines, etc., you might, want to include photographs to support your report., , A, , Upper crossmember front, , O, , Idler pulley, , B, , Control rod support, , P, , Rotor tower tubes, , C, , Rotor tower tubes, , Q, , Middle crossmember, , D, , AN 3 bolts, , R, , Motor mount spacers, , E, , Lower main rotor bearing, crossmember, , S, , Tail boom tubes, , F, , Support tube bracket, , T, , Tail rotor belt B 210 gates, , G, , Main rotor sprocket to tooth, , U, , Jack shaft, , H, , Main rotor sprocket hub, , V, , 3/4 Pillow block bearings, , I, , Main rotor shaft, , W, , Driven pulley, , J, , 503 rotax or larger, , X, , AN4 bolts, , K, , Main frame long runs, , Y, , 1 x 3 bolts, , L, , Idler pulley bracket, , Z, , Clutch lever, , M, , Idler pulley engine spacket, , A1, , MW 4 rod ends, , N, , Idler pulley swing arms, , B1, , Engagement arms, , D1, , Drive pulley, , C1 Belts (5) super HC 3V280 gates, , FIGURE 1.16 Sample drawing showing a belt drive, , https://abdullahsurati.github.io/bscit, , 21
Page 31 :
22, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , FIGURE 1.17 Sample diagram, , Photographs give the reader a realistic view of the object. However, they should have a good, enough resolution so that they are clear even upon reproduction. Irrelevant details can be removed, from photographs by working on the negatives., , Maps, , Maps graphically represent spatial relationships on plane surfaces. They are used to establish a, frame of reference and to facilitate the understanding of spatial relationships that are difficult to, describe in words, especially to serve as navigational, aid. They may take different forms, such as the map, of a political territory (town, state or country), the, layout of a store or a manufacturing plant, or the, market area of a business. They are appropriate when, discussing or presenting statistical data through, geographical indicators or expressing relationships, between locations. Figure 1.19 shows the map of, India’s population density., The choice of scale for a map depends on its, purpose and the amount of detail to be shown., It should be an accurate representation of the, geographic details (places, buildings, streets,, etc.). Cross-hatching or shading in maps is used, to portray absolute amounts, rates, ratios, and, percentages of data, such as health statistics,, population, employment, traffic flow, and land, FIGURE 1.18 Example of clip art available with MS usage. Colours, symbols, and pictograms may be, used to make maps more appealing and attractive., Word, https://abdullahsurati.github.io/bscit
Page 32 :
https://abdullahsurati.github.io/bscit, , BASICS OF TECHNICAL COMMUNICATION, , FIGURE 1.19 Sample map illustration, , SUMMARY, Technical communication is process of sharing information through various modes with a specific, audi-ence for a specific purpose. The process involves the transmission and interchange of ideas,, facts, feelings, or courses of action. Technical communication is different from general communication. The objective of technical communication is, to present correct, accurate, concise, clear, and appropriate information., The communication process includes six main, elements—sender, message, channel, receiver,, , response, and feedback. The success of communication lies in positive feedback. Sometimes the, message received is not the same as the message, intended by the sender; this is because of the presence of noise., Communication takes place at different levels:, extrap-ersonal, intrapersonal, interpersonal, organizational, and mass communication. In an organization the flow of communication can be vertical,, horizontal, or diagonal., , https://abdullahsurati.github.io/bscit, , 23
Page 33 :
24, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Visual aids are a very important component, of written technical communication. These are, used extensively in reports, presentations, and, proposals, to support the facts and figures being, , investigated and presented. The various types of, visual aids that can be used in technical documents, are tables, graphs, charts, drawings and diagrams,, photographs, and maps., , EXERCISES, 1. Answer the following questions in about 200, words each:, (a) How is general-purpose communication different from technical communication?, (b) Communication is the process of sending, and receiving information. Explain the, communication process in the light of this, statement. Draw the communication cycle to, support your answer., (c) How is feedback important in communication?, Give two examples of delayed feedback., (d) Explain ‘flow of communication’. Illustrate it, with examples from the existing communi, cation patterns in your college/institute., 2. What do you understand by the term technical, communication? Explain its importance with, examples., , 3. Human communication takes place at different, levels. How can you distinguish between intrapersonal and interpersonal communication?, 4. What are the characteristics of mass communication? Explain the term gatekeeper., 5. What are the various modes of communication, flow in an organization? What is upward flow, and what is the purpose of this mode in an, organization?, 6. How can visual aids enhance technical communication? What points should be borne in mind, while using visual aids?, 7. Project: Visit a few organizations (academic institutions/business enterprises/industries) and determine the communication patterns existing there., Classify them into oral and written categories. Also, figure out the direction in which these flow. Prepare a two-page report on each of your visits., , https://abdullahsurati.github.io/bscit
Page 34 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 2, , OBJECTIVES, You should study the chapter, to know, , • what communication barriers, are and what causes them, , • how to avoid communication, failures caused by noise, , • how to classify, , communication barriers, , Barriers to Communication, , INTRODUCTION, Having studied the basic principles of technical communication, in Chapter 1, we now move on to a very important factor related to, communication. Imagine you are a junior executive who has just joined, as a trainee in an automobile company. You go to meet your boss, to, seek permission for visiting the automobile exhibition being held in, Delhi. While you are talking, two of your colleagues also arrive to get, your boss’ signature on some bills. You fall silent while he signs the, bills. After they leave, you resume talking but you find that your boss, has not really grasped what you have said earlier. You later analyse this, situation, and realize that your colleagues’ intervention led to your, boss’ lack of concentration. As the sender, you had patiently tried to, express your wish. But because of the interruption by your colleagues,, the receiver, your boss, could not decode your message fully. Hence the, communication process failed., This discussion brings us to the introduction of the term ‘barrier’, in communication. A barrier is defined as something that prevents or, controls progress or movement. This definition implies that a barrier, is something that comes in the way of the desired outcome. In the, example given above, notice that the arrival of your colleagues was, an event that prevented your boss from concentrating completely on, what you were saying. So, we say that this incident was a barrier to, the communication between you and your boss. All of us have come, across such situations while communicating with parents, friends, or, colleagues. Let us now learn how to avoid such communication failures, and make our interactions more effective., We all know that effective communication is the nerve of all the, business activities in an organization. Even a slight break in the communication flow can lead to misunderCommunication is effective, standings. Communication is effective, only if it creates the desired, only if it creates the desired impact on, impact on the receiver., the receiver. Often, managers get frushttps://abdullahsurati.github.io/bscit
Page 35 :
26, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , trated in their efforts, and end up saying that nobody in the organization understands them., Many employees fail to listen attentively during meetings, or send incomprehensible business, letters. Such situations arise due to the presence of barriers in communication, which can take, many forms such as inadequate communication skills., There are numerous such barriers associated with communication. These need to be addressed, in order to ensure that no gap occurs in the communication cycle. A common barrier is the, wrong assumptions made about the person to whom the message is being sent and sometimes, about the message itself. For example, if the sender of the message is talking about a technical, proposal, he/she would be wrong if he/she makes assumptions about the receiver’s level of, technical knowledge. The problem can be resolved to a great extent if the sender of the message, analyses his/her message thoroughly and anticipates the likely response before sending it., If a particular communication fails to evoke the desired response, the following five steps can, help solve the problem:, • Identify the problem, • Find the cause/barrier, • Work on alternative solutions, , • Opt for the best solution, • Follow up rigorously, , The first step—identifying the problem—is the most difficult. We first realize that there is, a problem when we do not receive the desired feedback. To identify the problem correctly, it is, mandatory that the feedback be analysed carefully. For example, you have asked your subordinate, to write a bimonthly report, and until the next month, he has not done so. When you ask him, about the delay, he replies that he was asked to produce the report bimonthly. The problem here, is that to you the term bimonthly meant twice in a month, whereas to your subordinate it meant, once in two months. Later, you look up the dictionary and find that bimonthly means twice a, month as well as once in two months!, Having identified the problem, the next step is to find out what caused it. In this situation,, we could say that it was the choice of words. The third step is to explore possible solutions., In this case, a way out would be to choose words that are more specific in their meaning, i.e.,, words that could mean only one thing—the intended meaning. After thinking through the, alternatives, apply the best solution that not only solves the problem, but also does not create, any new difficulties. Hence, instead of using the troublesome term bimonthly, either twice a, month or once a fortnight could be used. After successfully completing all the four steps, the, last step requires that we implement the best solution properly. Having once come across a, particular communication barrier, there should be a conscious effort to never let it crop up again., In this chapter, we will discuss the various types of communication barriers, and how, they can be identified and overcome. Before going on to consider the different barriers to, communication, however, let us first understand the related term ‘noise’., , Noise, Any interference in the message sent and the message received leads to the production of ‘noise’, (see Figure. 2.1)., The term communication barrier, or that which inhibits or distorts the message, is an, expansion of the concept of noise. Noise here does not mean sound, but a break or disturbance, in the communication process. If noise occurs because of technological factors, it is not too, much of a problem as it can be removed by correcting the technological faults. However, if the, noise is due to human error, the parties involved in the communication process need to take, corrective measures., https://abdullahsurati.github.io/bscit
Page 36 :
https://abdullahsurati.github.io/bscit, , BARRIERS TO COMMUNICATION, , Noise is defined as any unplanned interference in, the communication environment, which affects the, transmission of the message. Noise can be classified as, Received, Sent, channel and semantic. Channel noise is any interference, message, message, in the mechanics of the medium used to send a message., Noise, Familiar examples of channel noise are distortion, FIGURE 2.1 Noise interferes in the correct trans- due to faulty background, noise in telephone lines,, mission of messages, or too high a volume or pitch from loudspeakers. In, written communication, illegible handwriting can, be termed as channel noise. Whereas channel noise develops externally,, Noise is defined as any, unplanned interference, semantic noise is generated internally, resulting from errors in the message, in the communication, itself. It may be because of the connotative (implied) meaning of a word, environment, which affects, that is interpreted differently by the sender and the receiver. For example,, the transmission of the, the word ‘condescend’ may have been used in a positive manner, implying, message., grace or dignity of manner, but the receiver might interpret it in a negative, manner, related to a (baseless) assumption of superiority. Other examples of semantic noise are, ambiguous sentence structure, faulty grammar, misspellings, and incorrect punctuation., , CLASSIFICATION OF BARRIERS, Quiet, or, quite?, , A barrier acts like a sieve, allowing only a part of the message, to filter through; as a result, the desired response is not, achieved. To communicate smoothly and effectively in an, organization, irrespective of your position, you need to know, how barriers operate, why they cause misunderstandings, and, how to minimize their negative impact. How often have you, said, ‘I meant to say this and not that’? Even with the best, intentions, communication barriers crop up and our written, and spoken messages are misunderstood. If we classify barriers, according to the processes of message formation and delivery,, we can identify three types:, • Intrapersonal, , • Interpersonal, , • Organizational, , Intrapersonal Barriers, Individuals are unique because of differences in perceptions, experiences, education, culture,, personality, etc. Each of us interprets the same information in different ways, as our thinking, varies. These differences lead to certain inbuilt or intrapersonal barriers. Let us explore all the, common causes that lead to these intrapersonal barriers:, • Wrong assumptions, • Varied perceptions, • Differing background, , • Wrong inferences, • Blocked categories, • Categorical thinking, , Wrong assumptions, Many barriers stem from wrong assumptions. For example, when a doctor tells her patient that, he has to take some medicine only ‘SOS’ (i.e., during an emergency), without knowing whether, the patient understands the term ‘SOS’, she is creating a barrier in their communication. Here the, https://abdullahsurati.github.io/bscit, , 27
Page 37 :
28, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , doctor has made a wrong assumption about her, patient’s level of knowledge. Wrong assumptions, are generally made because the sender or the, receiver does not have adequate knowledge about, the other’s background or entertains certain, false concepts, which are fixed in his/her mind., To strengthen your skills as a communicator, try, to put yourself in the shoes of the listener. This, exercise will prevent making wrong assumptions, about the receiver., , Varied perceptions, We all know the story of the six blind men and, their description of an elephant. The elephant, was perceived by each man as a fan, a rope, a wall,, a sword, a snake, and a tree. None of the blind, men were wrong, as the part of the elephant body, touched by each man compared well with the, various objects they named. This is how different, individuals hold different viewpoints about the, same situation., Similarly, individuals in an organization also, perceive the same situation in different ways. Let, us take the case of disagreement between two, individuals. If you are close to one of them, you, are likely to be biased. You may perceive your, friend’s arguments as correct, and hence, may not, be able to appreciate his/her opponent’s point of view. It is all a matter of perception. The best, way to overcome this barrier is to step back and take a wider, unbiased perspective of the issue., , ‘Take this medicine only SOS.’, , Differing backgrounds, No two persons have the same background. Backgrounds can be different due to different, education, culture, language, environment, financial status, etc. Our background plays a significant, role in how we interpret a message. At times, something not experienced earlier is difficult, to interpret or appreciate. Think of a class where the professor talks about his rock-climbing, adventure. Students who have experienced rock climbing may be able to appreciate the professor’s, talk, while others who have never been into adventure sports may not find it interesting at all., The representative of a computer company would not make much sense to a group of doctors if, in his/her presentation he/she goes into details about the hardware aspects, of the computer that he/she plans to install in a hospital., To enhance, To enhance communication skills, it is necessary to know the, communication skills,, background of the audience. This information can accordingly be used to, it is necessary to know, the background of the, construct the message. Empathy or identification with another person is the, audience. This information, solution to this barrier. We must make an effort to understand what the, can accordingly be used to, listener can find difficult to comprehend in our message because of the, construct your message., difference between our background and that of the listener. The language, https://abdullahsurati.github.io/bscit
Page 38 :
https://abdullahsurati.github.io/bscit, , ?, , ?, , ‘... and if you clip a carabiner to each end of the sling, you, have a quickdraw...’, , BARRIERS TO COMMUNICATION, , understood by the receiver should be used to, avoid ambiguity and reduce multiple meanings., The exact meaning of a word resides in the mind, of the speaker; therefore, one ought to be cautious, while using words. The multiple meanings of a, word can astronomically increase the problem, of communication barriers. A word can have, several connotations (implied meanings) and, definitions. The more a word is prone to multiple, meanings, the greater are the chances of it being, misunderstood. A conscientious speaker is careful, to explain her message in context by rephrasing, and repeating words that can be confusing., , Confusables, Common groups of words are sometimes confused, or ignored by users., • Ability is a skill that you have mastered through, study or practice. Capacity refers to innate talent., • If something affects you, it has an effect on you., To effect something, however, means to make, , something happen: ‘The new management, wanted to effect drastic changes, but the unions, felt these would adversely affect workers.’, Refer to Chapter 16 for more on this., , Wrong inferences, Suppose you have returned from a business trip and you find that two of your colleagues are, absent. They do not turn up for several days. Since there is a recession on, you draw an inference, that they have been laid off. The fact is that they have been promoted and sent to another, department. This is an example of fact-inference confusion. It has happened because you failed to, distinguish between what actually exists and what you had assumed to exist., Inferences are more dramatic than facts, and for this reason they can provide more scope for, gossip and rumour to spread. When professionals analyse material, solve problems, and plan, procedures, it is essential that inferences be supported by facts. Systems analysts, marketing, specialists, advertisers, architects, engineers, designers, and others must work on various premises, and draw inferences after collecting factual data. When presenting any inference in the course, of your work, you could use qualifiers such as ‘evidence suggests’ or ‘in my opinion’ to remind, yourself and the receiver that this is not yet an established fact., Blocked categories, In general, we react positively to information only if it is in consonance with our own views, and attitudes. Conversely, when we receive information that does not conform to our personal, views, habits, and attitudes, or appears unfavourable to us, we tend to react negatively or even, disbelieve it. Rejection, distortion, and avoidance are three common, undesirable, and negative, reactions to unfavourable information., https://abdullahsurati.github.io/bscit, , 29
Page 39 :
30, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , When Writing or Speaking, 1. Think of your audience. How well do they, understand the language? How much do they, know about your logic?, 2. Select your words with care, especially technical, terms. Words must be suited to your audience’s, language skills., 3. If you have to use slightly difficult or unfamiliar, words, try to explain these as part of your, communication., 4. Do not fall into the trap, however, of oversimplifying your language; your audience could get, , put off if you use words that sound unprofessional or non-technical., 5. Feedback serves as an effective barometer, to find out if the intended message has been, put across. Ask the receiver to paraphrase the, message and also ask questions on what was, said., 6. Even if you have an extensive vocabulary, never, use words merely to impress. Rather use them, to express your ideas as simply and clearly as, possible., , Communication and other technologies are advancing so rapidly today that many people, find it difficult to quickly adapt themselves to these developments. Instead of taking advantage, of these developments, which help expedite the communication process, such people tend, to resist and criticize them. This is a result of having a closed mind. Such people are called, misoneists. They tend to ignore variations and differences, which leads to unreliable conclusions., Some people have certain prejudices so deeply embedded in their mind that these cannot be, challenged., Similarly, people who are very rigid in their opinions may face problems in communicating, effectively. For example, one of your fellow students may think that only students of science are, good in reasoning; another might be of the opinion that young executives are more efficient, than older ones. Such people fall into blocked categories, because they may not be able to accept, any deviation from their points of view., , Categorical thinking, People who feel that they ‘know it all’ are called pansophists. This type of thinking exists in, people who feel that they know everything about a particular subject, and therefore refuse, to accept any further information on that topic. For example, in a general body meeting of, your organization, you are to be briefed about the annual budget. However, you do not pay, attention because you feel you have already been briefed about it by your secretary the previous, day. Later you propose that new vehicles have to be bought. Imagine your embarrassment, when you realize that the topic was discussed and a decision has already been taken in the, general body meeting. This type of thinking can pose a major barrier, leading to a failure in, communication. In such instances, the receivers refuse information because of their ‘know-itall’ attitude., The clue to detecting this barrier in ourselves and in others is the use of words like all,, always, everybody, everything, every time and their opposites like none, never, nobody, and, nothing. If a message contains too many of these words, then there is a fair chance of the, communication getting distorted. To avoid this barrier, substitute these words with phrases, like ‘in most situations’ or ‘most likely’. Label your opinions with phrases like, ‘it appears to me’, or ‘the evidence indicates’. If your data is insufficient, it is better to admit that you are unaware, of the rest of the information rather than being indirect. To sum up, good communicators, should:, https://abdullahsurati.github.io/bscit
Page 40 :
https://abdullahsurati.github.io/bscit, , •, •, •, •, , BARRIERS TO COMMUNICATION, , • Listen, and above all, paraphrase, • Remember that generalizations do not, always hold good in all situations, , Be non-judgemental, Be empathetic, Not assume anything, Stick to the subject, , Interpersonal Barriers, Intrapersonal barriers stem from an individual’s attitudes or habits, whereas interpersonal, barriers occur due to the inappropriate transaction of words between two or more people. The, two broad categories into which these barriers can be classified are:, • Inefficient communication skills, , • Negative aspect nurturing in the climate, , • Limited vocabulary, • Incompatibility (clash) of verbal, and non-verbal messages, • Emotional outburst, , •, •, •, •, , The second point refers to a situation when negative tendencies nurtured by some people, affect others around them. This leads to a barrier as individuals start thinking only negative., Interpersonal barriers creep in as a result of the limitations in the communication skills of the, encoder or the decoder, or of both. In addition, they may also occur because of some disturbance, in the channel or medium of communication. If two people are involved in communication, the, traits that distinguish them as individuals can be the root cause of a communication problem., In a business environment, we neither attempt to change these traits, nor can we do it;, however, we can try and understand the role of differences among individuals that lead to, communication breakdowns. The most common reasons for interpersonal barriers are:, Communication selectivity, Cultural variations, Poor listening skills, Noise in the channel, , Limited vocabulary Inadequate vocabulary can be a major hindrance in communication. At, times, we find ourselves searching for the exact word or phrase that would be appropriate for, what we are trying to express. For example, during a speech, if you are at a loss for words, your, communication will be very ineffective, and you will leave a poor impression on the audience., On the other hand, if you have a varied and substantial vocabulary, you can create a favourable, impression on your listeners., Merely having a wide vocabulary is of no use unless the communicator knows how to use it., In communication, the denotative (literal or primary) and connotative (implied or suggested), meanings of the words used should be absolutely clear to the receiver. Therefore, one should make, constant efforts to increase one’s vocabulary by regularly reading a variety of books and listening, to native speakers of the language. Thereafter, using a wide vocabulary regularly will also help to, make its usage comfortable and natural. Chapter 16 discusses vocabulary development in detail, , Incompatibility of verbal and non-verbal messages, Imagine a situation where your CEO introduces the newly recruited middle-level manager to, the other employees. In a small speech, he conveys the message that he is very delighted to have, the new manager appointed in his office. However, the expression on his face shows just the, opposite of what he is saying. The stark difference between the verbal and non-verbal aspects of, his communication leaves his listeners feeling confused and puzzled., A communicator should acclimatize himself to the communication environment,, think from the angle of the listener, and then communicate. Misinterpreted non-verbal, https://abdullahsurati.github.io/bscit, , 31
Page 41 :
32, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , communication acts as another barrier to, effective information flow instead of enhancing, and enlivening verbal communication. Nonverbal cues provide a deeper insight into the, sender’s message. Ignoring non-verbal cues or, misinterpreting them can result in the message, being completely misunderstood. Thus, one, should not only try to accurately gauge others’, non-verbal cues but also be aware of one’s own, body language., Generalizations, based on assumptions, about physical appearance or dress, can also, lead to severe communication barriers. Physical, ‘Did whatever I said in the last half hour make any sense to you?’, appearance often serves as one of the most, important non-verbal cues. For instance, many, people initially formed negative impressions of Einstein because of his, The first impression about, worn-out appearance., people is most often, Guidelines to improve your appearance:, made on the basis of their, physical appearance,, which significantly, affects the quality of, communication., , •, •, •, •, , Dress according to the occasion., Wear neat and clean clothes., Choose an appropriate hairstyle., Wear clean and polished shoes., , While interpretation of non-verbal cues requires keen observation, there are also pitfalls to, guard against. For instance, there is great disparity in the use and interpretation of non-verbal, messages across countries and cultures. For example, in Kenya, a mother-in-law and a son-inlaw avoid eye contact. In fact they turn their backs to each other. In America, this would be a, sign of disrespect., In brief, your non-verbal cues should consistently match your verbal messages, adding to, their effectiveness and enhancing your image as a competent and interesting communicator., , Emotional outburst, Imagine that you are the President of a well-established company. There are rumours floating, amongst your employees that you have indulged in fraudulent activities. You are fully aware that, these rumours are baseless. However, when you are asked to address the same employees, you, are unable to put your point across, as you are flushed, with anger. Despite the fact that you are a confident, public speaker, your communication failed as you were, overwhelmed by your emotions., In most cases, a moderate level of emotional, involvement intensifies communication, making it more, personal. However, excessive emotional involvement, can be an obstacle in communication. For example,, extreme anger can create such an emotionally charged, environment that a rational discussion becomes, impossible. Likewise, prejudice, stereotyping, and, https://abdullahsurati.github.io/bscit
Page 42 :
https://abdullahsurati.github.io/bscit, , BARRIERS TO COMMUNICATION, , boredom all hinder effective communication. Positive emotions such as, happiness and, excitement, also interfere in communication, but to a much lesser extent than negative feelings., Emotions are an integral part of our being, whether in business or in personal encounters., By sharpening self-awareness, intuition, and empathy, emotions can help in developing an, environment that is highly conducive to good communication. Yet, situations often arise where, people react negatively. Depending on their nature and the situation, this negative reaction may, be classified as hostile or defensive. Hostility can be considered as a move to counter-attack, the threat, whereas defensiveness is resistance to it. Both reactions occur when the receiver of, the message perceives some kind of threat. Both these responses have an extremely negative, impact on the communication. Messages are misinterpreted, ignored, or overreacted to by, people displaying such behaviour. Those who witness such behaviour are most likely to lower, their opinion of such people., It is important to maintain one’s composure in all kinds of communication. Viewing issues, from different perspectives helps develop objectivity and rational thinking, which in turn can, eliminate many of the causes of hostility or defensiveness. When confronted with such negative, behaviour, it is essential to avoid reacting. The person displaying these emotions should be, calmed down. They should preferably be taken to a quiet place to try and sort out the problem, that caused their emotions to spin out of control., , Communication selectivity, When the receiver in a communication process pays attention only to a part of the message, he/, she is imposing a barrier known as communication selectivity. This happens because he/she is, interested only in that part of the message which may be of use to him/her. In such a situation,, the sender is not at fault. It is the receiver who breaks the flow of communication., Take for example, a meeting held by the CEO of a company. She has called all her senior, executives from various divisions—production, marketing, finance, human resource (HR), etc., During the meeting she discusses diverse topics. However, she may not be able to get the entire, message across to each one of the participants, unless she gets their undivided attention. If the, production manager and the marketing manager pay attention only to matters related to their, respective areas, they may not be able to get the total perspective of what the CEO is conveying., Communication selectivity may act as a barrier in written forms of communication as well., While reading any document, if you read only the parts you consider useful, you are posing this, barrier., Cultural variations, This is one of the predominant interpersonal factors contributing to communication failure., As businesses are crossing national boundaries to compete on a global scale, the outlook of the, global and domestic workforce has changed drastically. European, Asian, and American firms, have expanded their businesses worldwide to create international ties through partnership,, collaborations, and affiliations. The management and employees of such companies need to, closely observe the laws, customs, and business practices of their host countries, while dealing, with their multinational workforce. To compete successfully in such a business environment,, one must overcome the communication inadequacy arising due to different languages and, cultures., This factor holds good in the area of education as well. You will prove to be a successful, communicator abroad, during the course of your higher studies, if you take pains to understand, https://abdullahsurati.github.io/bscit, , 33
Page 43 :
34, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , the culture of the educational campus in which you would be studying. Success, whether as a, student or as a professional, lies in knowing the business practices, social customs, and etiquette, of the particular country one is dealing with., , Poor listening skills, A common obstacle to communication is poor listening habits. We should remember, that listening and hearing are not the same. Hearing is a passive exercise while listening, requires careful attention and accurate decoding of the signals received from the speaker., Misunderstandings and conflicts can be avoided if people listen to the message with attention., The various distractions that hinder listening can be emotional disturbances, indifference,, aggression, and wandering attention., Sometimes, an individual is so engrossed in his/her own thoughts and worries that he/she, is unable to concentrate on listening. If a superior goes on shifting the papers on his/her desk, while listening to his subordinate, without making eye contact with the latter, he/she pays, divided attention to the speaker’s message. This divided attention adversely affects the superior–, subordinate relationship, besides distorting the communication. Chapter 4 discusses listening, skills in detail., Noise in the channel, As discussed earlier, noise interferes in the transmission of signals. Noise is any unwanted signal, that acts as a hindrance in the flow of communication. It is not necessarily limited to audio, disturbances, but can also occur in visual, audio-visual, written, physical, or psychological forms., All these forms of noise communicate extraneous matter which may distract the receiver from, the message, and even irritate him/her., Technical or physical noise refers to the din of machines, the blare of music from a stereo, system, or other such sounds which make the task of the listener difficult. Human noise can, be experienced when, for instance, employees gather for a meeting and a member arrives late, distracting everybody’s attention. Disturbances in telephone lines, poorly designed acoustics of, a room, dim typescripts, and illegible writing are some more examples of technical noise., , Organizational Barriers, Communication barriers are not only limited to an individual or two people but exist in, entire organizations. Every organization, irrespective of its size, has its own communication, techniques, and each nurtures its own communication climate., In large organizations where the flow of information is downward, feedback is not guaranteed., Organizations with a flat structure usually tend to have an intricately-knit communication, network. Irrespective of size, all organizations have communication policies which describe the, protocol to be followed. It is the structure and complexity of this protocol that usually causes, communication barriers., Most large companies are realizing that a rigid, hierarchical structure usually restricts the, flow of communication. This is because there are numerous transfer points for communication, to flow in these hierarchical systems, and each of these points has the potential to distort, delay,, or lose the message. To obviate this, there should be direct contact between the sender and the, receiver with minimum transfer stations. If the message is presented orally, this further reduces, the dependence on transfer stations., https://abdullahsurati.github.io/bscit
Page 44 :
https://abdullahsurati.github.io/bscit, , The main organizational barriers are as follows:, • Too many transfer stations, • Fear of superiors, • Negative tendencies, , BARRIERS TO COMMUNICATION, , • Use of inappropriate media, • Information overload, , Too many transfer stations, The more links there are in a communication chain, the greater are the chances of, miscommunication. Imagine, for instance, that your professor asks you to convey a message to, X. You, because of some inconvenience or sheer laziness, ask your friend Y to do this job. Now,, there are four people involved in this communication channel. Let us see how the message gets, distorted as a result of the increased number of transfer stations:, Professor: X was supposed to meet me today regarding the submission of an assignment on Magnetic, Theory. But I want X to meet me on Friday, as I am going out of station tomorrow., You (to your friend Y): Ask X to meet the professor tomorrow, regarding the assignment, as the professor is, going out of station today., Your friend Y(to X): X, you have to meet the professor today as he will not be available tomorrow., , This is an example of how messages get distorted in huge organizations with several layers, of communication channels. The message gets distorted at each level not only because of poor, listening or lack of concentration, but also because of several other reasons. Some employees, may filter out the parts of the message they consider unimportant. Whatever the reasons for, filtering or distorting the message, having too many transfer stations is always an obstacle, to effective communication and should be avoided. Transfer stations do serve a purpose, but, having too many of them is counter-productive., , Fear of superiors, In rigidly structured organizations, fear or awe of superiors prevents subordinates from speaking, frankly. An employee may not be pleased with the way his/her boss extracts work from him/, her but is unable to put his/her point across because of fear of losing the boss’s goodwill. As, a supervisor, it is essential to create an environment which enables people to speak freely. An, open environment is conducive to increasing the confidence and goodwill of a communicator., To avoid speaking directly to their boss, some employees may shun all communication with, their superiors. At the other extreme, they may present all the information they have. This, is because they feel that they will be viewed in an unfavourable light by leaving out some, vital information. In written communication, this results in bulky reports, where essential, information is clubbed with unimportant details. Such unfocussed messages result in a lot of, wasted time. Such practices need to be eliminated by superiors to ensure that communication, flows effectively in their organizations. Moreover, by encouraging active, n organizations with many, participation from their subordinates, senior officers pave the way for, levels of communication,, more ideas, resources, or solutions to come forth from their subordinates., messages have a, greater chance of being, distorted. This occurs due, to poor listening, lack, of concentration, or a, person’s tendency to leave, out part of the message., , Negative tendencies, Many organizations create work groups. While some groups are formed, according to the requirements of the task at hand, such as accomplishing, a particular project, many other small groups are also formed for, recreational, social, or community purposes. These groups may be formal, https://abdullahsurati.github.io/bscit, , 35
Page 45 :
36, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , or informal, and generally consist of people who share similar values, attitudes, opinions, beliefs,, and behaviours. Nevertheless, on some occasions, a communication barrier can exist due to a, conflict of ideas between the members and non-members of a group., For example, the student members of the sports club of an educational institution may, be annoyed with non-members who oppose the club’s demand for allocating more funds to, purchase sports equipment. This type of opposition gives rise to insider–outsider equations,, which in turn pave the way for negative tendencies in the organization. Once these negative, tendencies develop, they create noise in interpersonal communication., , Use of inappropriate media, Some of the common media used in organizations are graphs and charts, telephones, facsimile, machines, boards, email, telephones, films and slides, computer presentations, teleconferencing,, and videoconferencing. While choosing the medium for a particular occasion, the advantages,, disadvantages, and potential barriers to communication must be considered. While deciding, upon the medium, the following factors should be considered:, • Time, • Type of message, • Cost, • Intended audience, , The telephone, for instance, would not be an ideal medium for conveying confidential, information. Such messages are best conveyed in person or, if the receiver is located in another, office, by private chat messenger. Printed letters, which provide permanence, are preferable for, information which requires to be stored for future reference. Usually, a mix of media is best for, effective communication. For example, after booking an order online, a follow-up call can be, made to verify whether the order has been placed., , nformation overload, One of the major problems faced by organizations today is the decrease in efficiency resulting, from manual handling of huge amount of data. This is known as information overload. The usual, results of information overload are fatigue, disinterest, and boredom. Under these circumstances,, further communication is simply not possible. Very often, vital, relevant information gets mixed, up with too many irrelevant details, and, is therefore ignored by the receiver., Thus, the quality of information is much, more important than the quantity., To reduce information overload in an, organization, screening of information, is mandatory. Messages should be, directed only to those people who are, likely to benefit from the information., Major points should be highlighted,, leaving out all irrelevant details., Bearing in mind all these possibilities, and reasons for communication failure,, one can take pre-emptive measures to, avoid these barriers., https://abdullahsurati.github.io/bscit
Page 46 :
https://abdullahsurati.github.io/bscit, , BARRIERS TO COMMUNICATION, , Tips for Effective Communication, Constant practice and rigorous implementation, of these ideas will help you become an excellent, communicator., • Always keep the receiver in mind., • Create an open communication environment., • Avoid having too many transfer stations., , • Do not communicate when you are emotionally, disturbed., • Be aware of diversity in culture, language, etc., • Use appropriate non-verbal cues., • Select the most suitable medium., • Analyse the feedback., , SUMMARY, Communication fails because often the message, sent is not always the message received. Various, interruptions or barriers prevent the proper passage, of information from sender to receiver. This failure, can be attributed to various types of ‘noise’, which, could exist either at the source, in the channel, or, at the receiver., If a speaker does not see the desired response, from the audience, he/she must identify the, problem, find the cause or barrier, work on, alternative solutions, select the best solution, and, follow up rigorously to ensure that this barrier does, not come up again., Barriers to communication are classified as intrapersonal, interpersonal, and organizational., Intra-personal barriers occur because of individual, , attributes, such as wrong assumptions, varied perceptions, differing backgrounds, wrong inferences,, blocked categories, and categorical thinking. Interpersonal barriers occur due to inappropriate transactions of verbal and non-verbal messages between, two or more people. The different barriers are limited vocabulary, incompatibility, or clash of verbal, and non-verbal messages, emotional outburst,, communication selectivity, cultural variations, poor, listening skills, and noise in the channel., Organizational barriers stem from organizational, attributes such as too many transfer stations, fear of, superiors, negative tendencies, use of inappropriate, media, media, and information overload. Once we, know the reasons for failure of communication, we, should take pre-emptive measures to overcome it., , EXERCISES, 1. Identify the communication barrier that describes, each of the following situations:, (a) ‘Every time I have a meeting with Mr Gupta, I, end up disagreeing with him about a particular, issue.’, (b) Manager: ‘Reeta, where is the report that I, asked you to submit on the financial matters, of the company?’, , Reeta: ‘I do not remember you asking me to, submit a report.’, (c) Teacher: ‘Students, why have you not submitted, the report within the fortnight?’, , Students: ‘But you asked us to submit it, bimonthly!’, , (d) ‘This room is horrible to work in. I am able to, hear everyone around, and there is no scope, for privacy.’, (e) ‘It is quite tedious to manually work on the, students’ records, but I fear using the computer, as it might corrupt all our data.’, (f) ‘Why every time I get a meeting with John, I, usually end up showing my disinterest with, him about a particular topic?’, (g) ‘If you want some more information from me,, ask only the specific questions and do not, waste my precious time! ’, 2. Identify and explain a communication barrier, which may hinder each of the process compo-, , https://abdullahsurati.github.io/bscit, , 37
Page 47 :
38, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , nents given in the schematic representation of, the human communication process., 3. ‘A barrier acts like a sieve, allowing only a part of, the message to filter through; as a result, the desired response is not achieved.’, Keeping in mind the above statement mention, the various types of interpersonal barriers which, hinder the communication process. Substantiate, your answer with suitable examples., 4. Imagine you are the Sales Manager in Ramanath, Paper and Pulp Company. Some of your co-employees are spreading rumours that you are involved in fraudulent activities. In order to defend, yourself, you are asked to address the same coemployees. You are angry due to these rumours, and you find it difficult to put your views before, them. Identify the communication barrier that, hinders this communication situation., 5. Explain the following terms with reference to communication barriers and give two examples for, each term., (a) Organizational barrier (b) Emotional outburst, (c) Cultural differences (d) Information overload, (e) ‘Know-it-all’ attitude, 6. You have been assigned to host a group of American university students who are visiting your institute for the next two weeks. What can you tell, them that will help them fit into the culture on, your campus? Make, a list of the important behavioural rules they, should understand in order to communicate effectively with students and faculty on your campus. Also point out some problems that might occur if the American students disregard these rules., , 7. Identify the barriers that lead to miscommunication in the following scene. How can the manager, overcome this barrier?, , ing, Meet, at, pm, 5:00, GM, , ‘I called for a meeting with the supervisors. But none, turned up . . . nobody pays attention to me in this place . ., . it would be better to quit’., , 8. Write the possible solutions to overcome these, bar-riers:, (a) Dealing with people working in isolated office, or environment., (b) Dealing with a customer who is very talkative, (c) Working in a noisy surrounding, (d) Dealing with a frustrated and angry client, (e) Dealing with visual distractions at workplace, 9. Give at least two situations for the barriers mentioned below:, (a) Physical barrier, (b) Negative tendency, (c) Wrong inferences, (d) Transfer station, (e) Difference in background and language, , https://abdullahsurati.github.io/bscit
Page 48 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 3, , OBJECTIVES, You should study the, chapter to know, , • the meaning of non-verbal, communication, , • the different aspects of nonverbal communication such, as kinesics, proxemics, and, chronemics, • cross-cultural, communication differences, , Non-verbal Communication, , INTRODUCTION, Effective communication takes into account both the verbal and nonverbal aspects of communication. While verbal communication is, organized by language, non-verbal communication is not. This chapter, discusses non-verbal communication. Non-verbal communication, refers to all communication that occurs without the use of words,, spoken or written. It is concerned with body movements (kinesics),, space (proxemics), and vocal (paralinguistic) features. It includes all, unwritten and unspoken messages, both intentional and unintentional., Non-verbal cues, however, speak louder than words, as even though, speech can be made up, bodily expressions can rarely be masked well, enough to hide one’s true feelings and emotions., , Crossed at the, ankle, , Crossed at the, knees, , Open crossed with one, ankle on the other thigh, , Uncrossed and straight, Uncrossed and, closed together, straight far apart, https://abdullahsurati.github.io/bscit
Page 49 :
40, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Personal appearances, facial expressions, postures, gestures, eye contact, voice, proximity,, and touch are all non-verbal signals that influence the way in which a message is interpreted, and understood. Though they have a profound impact on the receivers, it is difficult to analyse, them accurately. This is because the interpretation of non-verbal cues is a very subjective, concept, varying based on people’s varied backgrounds (refer to cross-cultural communication)., Nevertheless, they must not be ignored, but recognized and understood as correctly as possible., See the PowerPoint presentation on body language in the CD. See also the GD and interview, video situations on body language., , KINESICS, Kinesics is the study of the body’s physical movements. It is the way the body communicates, without words, i.e., through the various movements of its parts., Some kinesic behaviours are deliberate. For example, you nod your, ‘You cannot not commuhead to indicate acceptance. While speaking, listening, reading, or, nicate. You communicate, writing, we consciously use words to receive or send ideas. Why do we, just by being. Nodding, use words? Because they are the primary symbolic forms that convey our, your head, blinking your, thoughts. On paper, words remain static; however, punctuation marks, eyes, shrugging shoulders,, are used to convey pauses, expressions, emotions, etc. But in face-to-face, waving hands, and other, such physical activities, communication, the message is conveyed on two levels simultaneously., are all forms of communiOne is verbal and the other is non-verbal. For example, suppose you are, cation.’, congratulating two of your friends on their successful interviews. If you, –Watzlawick and associates, extend your hand to them with a big smile on your face along with the, utterance, ‘Congrats’, your appreciation has more impact on them than, ‘He that has eyes to see, the word in isolation. Your smile and the handshake are kinesics, which, and ears to hear may, enhance the impact of your verbal communication., convince himself that no, The non-verbal part of any communication is not as deliberate and, mortal can keep a secret. If, conscious as the verbal part. Rather, it is subtle and instinctive, and often, his lips are silent he chats, involuntary. It is important to study body language because it is estimated, with his fingertips; betrayal, oozes out of him at every, that the verbal component of oral communication carries less than 35 per, pore.’, cent of the social meaning of the situation, while more than 65 per cent is, –Sigmund Freud, attributed to body language. People react strongly to what they see., , Body Language, When a speaker presents himself/herself, we, see him/her before we start hearing him/her., Immediately, we begin developing impressions, of his/her abilities and attitudes based on the, non-verbal signals he/she sends. This is why body, language is so critical in oral communication., , Body language includes every aspect of our, appearance, from what we wear, how we stand,, look, and move, to our facial expressions and, physical habits, such as nodding the head, jingling, change in the pocket, or fiddling with a necktie. Our, use of space and gestures are other key indicators., , Personal appearance Personal appearance plays an important role; people see before they hear., Just like we adapt our language to the audience, we should also dress appropriately. Appearance, includes clothes, hair, accessories, cosmetics, and so on. Today, the purpose of clothing has, https://abdullahsurati.github.io/bscit
Page 50 :
https://abdullahsurati.github.io/bscit, , NON-VERBAL COMMUNICATION, , altered from fulfilling a basic need to expressing oneself. Clothes also accentuate the body’s, movements, and the choice of clothes reveals a lot about the wearer’s personality and attitude., Personal appearance must be so planned that it communicates effectively to others. Even, before a speaker utters his/her first syllable the audience begins to form an opinion about him/, her and visualizes the way he/she is going to talk. One’s appearance may put the audience into a, resistant or hostile attitude or induce in them a receptive mood. To be clean and well groomed,, conforming to the need of the occasion, is of utmost importance. Appearances communicate, how we feel about ourselves and how we want to be viewed., Posture Posture generally refers to the way we hold ourselves when, we stand, sit, or walk. One’s posture changes according to the situation., If nervous, one would normally be seen pacing, bobbing the shoulders,, fidgeting with notes, jingling coins, moving constantly, or staying glued, to the ground., When we are with friends we are probably spontaneous. We are not, conscious about our posture and our physical movement is natural. But, when we encounter an unfamiliar situation, we become more conscious, of our posture. For instance, during an oral presentation, stiff positions,, such as standing akimbo (with hands on hips and elbows pointing away, from the body), send the message of defiance or aggression. It is always, better to lower the hands to one’s sides in a natural, relaxed, and resting, posture. Standing, sitting, or walking in a relaxed way is a positive posture,, which will encourage questions and discussion. Also being comfortably, upright, squarely facing an audience, and evenly distributing one’s weight are aspects of posture, that communicate professionalism, confidence, attention to detail, and organization. The way, one sits, stands, or walks reveals a lot:, , Slumped, , Lean backward, , Erect, , Lean forward, , Crossed arms, , Uncrossed arms, , https://abdullahsurati.github.io/bscit, , 41
Page 51 :
42, , TECHNICAL COMMUNICATION, , •, •, •, •, •, •, , https://abdullahsurati.github.io/bscit, , Slumped posture—low spirits, Erect posture—high spirits, energy, and confidence, Lean forward—open, honest, and interested, Lean backward—defensive or disinterested, Crossed arms—defensive and not ready to listen, Uncrossed arms—willingness to listen, , Gesture Gesture is the movement made by hands, head, or face. Skillful and appropriate, gestures can add to the impact of verbal communication. A well-timed gesture not only drives, a point home but also enhances the value of what is being said. Similarly, an awkward gesture, (like playing with a key chain or button) can mar the effectiveness of the message., Gestures clarify our ideas or reinforce them and should be well suited to the audience and, occasion. Gestures are more numerous than any other form of non-verbal communication,, and the meanings attached to them are diverse. It has been observed that there are as many, as 700,000 varied hand gestures alone (Birdwhistell 1952), and the meanings derived from, them may vary from individual to individual. Some hand gestures are shown in a PowerPoint, presentation on body language in the CD., Gestures should not divert the attention of the listener from one’s message. They should be, quite natural and spontaneous. Be aware of and avoid irritating gestures such as playing with a, ring, twisting a key chain, clasping hands tightly, or cracking knuckles. Gestures can roughly be, divided into the following types:, , Descriptive, , Enumerative, , •, •, •, •, •, , Symbolic, , Locative, , Emphatic, , Enumerative—numbers, Descriptive—size of the objects, Symbolic—abstract concepts, Locative—location of an object, Emphatic—emphasis, , Facial expression Along with postures and gestures, facial expressions also play an important, part in non-verbal communication. The face is the most expressive part of our body. A smile, stands for friendliness, a frown for discontent, raised eyebrows for disbelief, tightened jaw, muscles for antagonism, etc. Facial expressions are subtle. They can be used in a variety of, ways to aid, inhibit, or complement communication. The face rarely sends a single message at, a time. Instead, it sends a series of messages—facial expressions may show anxiety, recognition,, hesitation, and pleasure in quick succession., Facial expressions are difficult to interpret. Though there are only six basic expressions, there, can be many shades and blends of these. Also, people tend to hide their true feelings, and, https://abdullahsurati.github.io/bscit
Page 52 :
https://abdullahsurati.github.io/bscit, , NON-VERBAL COMMUNICATION, , project expressions that are appropriate according to the circumstances. The six basic facial, expressions are:, • Happiness, • Surprise, • Disgust, • Fear, • Anger, • Sadness, Eye contact Eyes are considered to be the windows of the soul. We look at the eyes of a speaker, to find out the truthfulness of his/her words, intelligence, attitudes, and feelings. Eye contact is a, direct and powerful form of non-verbal communication. We use our eyes to cull information. Eyes, are also a rich source of feedback., Looking directly at listeners builds rapport. Prolonging the eye contact for three to five, seconds (without, however, giving the impression of staring) tells the audience that the presenter, is sincere in what he/she says and that he/she wants us to pay attention. Eye contact is especially, important when we start a conversation., Our upper eyelids and eyebrows help us convey an intricate array of non-verbal messages., Arabs, Latin Americans, and South Europeans look directly into the eyes. Asians and Africans, maintain far less eye contact. In the professional world one should make personal and pleasant, eye contact with the listeners. Eye contact shows one’s intensity and elicits a feeling of trust., A direct look conveys candour and openness. This direct and powerful form is a signal of, confidence or sincerity; therefore, experienced speakers maintain longer eye contact. The eyes, should convey the message, ‘I am pleased to talk to you, do believe in what I am saying?’, , Happiness, , Fear, , Surprise, , Anger, , https://abdullahsurati.github.io/bscit, , Disgust, , Sadness, , 43
Page 53 :
44, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , PROXEMICS, Proxemics is the study of physical space in interpersonal relations. Space is related to, behavioural norms. The way people use space says a lot about them. In a professional setting,, space is used to signal power and status. For instance, the head of a company has a larger, office than junior employees., Gestures should be in accordance with the space available. When there is plenty of space to, manoeuvre, one should move more boldly and expand one’s gestures. When seated at a table,, one should use milder gestures. One can even subtly reach out over the table to extend one’s, space. This expresses control and authority., It is possible to learn a great deal about how to manipulate space by watching dynamic and, influential speakers. Interestingly, like kinesics, proxemics also has cultural variations. A Latin, American or French person is likely to stand closer to another person when conversing than, an Anglo-Saxon would in the same situation. Americans, addressed from a close distance, may, feel offended or become aggressive. Studies show that Americans, unlike many other nationals,, avoid close contact with one another in public places. Indians decide the distance based on the, relationship. They prefer to maintain distance with elders and a superior person. However, with, a friend they may maintain less distance. Edward T. Hall (1966) divides space into four distinct, zones (see Figure 3.1)., , FIGURE 3.1 The four distinct space zones, https://abdullahsurati.github.io/bscit
Page 54 :
https://abdullahsurati.github.io/bscit, , NON-VERBAL COMMUNICATION, , Intimate This zone starts with personal touch and extends just to 18 inches (one and a half, feet). Members of the family, lovers, spouses, relatives, and parents fall under this zone. The best, relationship that describes it is the mother–child relationship. This zone does not need active, conversation. One can whisper or make unintelligible sounds but still be able to communicate., Other individuals come close for a very brief period and only under special circumstances—, when they want to congratulate, sympathize, or console. A handshake, a pat on the back, or a, hug, all come into this zone., Personal This zone stretches from 18 inches (one and a half feet) to 4 feet. Close friends,, colleagues, peers, etc. fall in this zone. Instead of whispering sounds or utter silence,, there can be normal conversation in this zone. Though this zone is personal, it is quite a, relaxed and casual place. It permits spontaneous and unplanned communication. Sitting or, standing so close brings one closer to the listener and gives the impression of friendliness, and warmth., Social Social events take place in the radius of 4 feet to 12 feet. In this zone, relationships are, more formal and official. People are more cautious in their movements. These situations involve, less emotion and more planning. The number of people decides whether it should be a sitting–, sitting or sitting–standing position. It is through experience that one decides which position to, take. If the number of people is less and eye contact can be maintained, a sitting–sitting position, can be used. To be authoritative with a large audience, a sitting–standing position is used., Public This zone starts from 12 feet and may extend to 25 feet or to the range of eyesight, and hearing. Events that take place in this zone are formal. Here the audience views what is, happening as an impartial observer. The degree of detachment is very high. The audience is free, to do whatever it feels like. Here the speaker has to raise his/her voice to communicate to others, or use a microphone. Public figures like the prime minister of a country, for example, have to, maintain this distance for security reasons., , CHRONEMICS, Chronemics is the study of how human beings communicate through their use of time. How do, we communicate with others? What does time mean to us? In order to use time as an effective, communication tool, we should understand its impact on the various aspects of our lives and act, accordingly. We must attempt to use time as effectively as possible., In the professional world, time is a valuable resource. When we are late for an appointment,, people react negatively. If we arrive early, we are considered either over-eager or aggressive. So, we, should always be on time. By valuing someone else’s time, we communicate our professionalism, or seriousness both subtly and explicitly., People have their own time language. To one person who wakes up at 8:00 a.m., 6:30 a.m. may, be early; to another, 8:00 a.m. may be late if he/she wakes up at 5:00 a.m. every day!, Time language also varies from culture to culture. In Latin countries, meetings usually begin, well after their appointed time. Everyone knows this. It is customary, and no one is offended, by the delay. In Scandinavia or Germany, on the other hand, strict punctuality is the rule, and, tardiness is frowned upon. In India, time language varies according to the occasion. Punctuality, is expected for a professional meeting, but it is not insisted upon for a party. People in India are, generally liberal with time., https://abdullahsurati.github.io/bscit, , 45
Page 55 :
46, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , CORRELATING VERBAL AND NON-VERBAL COMMUNICATION, Imagine you are giving a presentation in front of your professor and friends. They all seem to be, listening to you, but their non-verbal behaviour indicates boredom and restlessness. Somewhat, puzzled and unsure of yourself, you seek their agreement and several of them concur verbally, through verbal expressions such as ‘Great!’, ‘Wow!’, ‘Perfect!’, etc. Nevertheless, their non-verbal, language conveys the impression that they are far from confident about the presentation. What, would you do in such a situation? You should try to understand the non-verbal cues and pause, the presentation to ask a few questions. Questions usually get people involved and make a, presentation more interactive and meaningful., ‘Words conceal but actions reveal’. This is true because when we speak to somebody, we are, constantly sending some non-verbal cues as well. The way we use our voice, our body language, including our facial expressions, posture, gestures, eye contact, and the distance we maintain add, meaning to the words spoken, or modify the verbal message being conveyed. The tone of our, voice can change the meaning perceived from positive to sarcastic, and the stress points of our, sentences can highlight the specific points and subtly change the meaning of our utterances., We should learn to recognize patterns of non-verbal language, beginning with our own., We should always be aware of how non-verbal language operates throughout the organization., According to psychologists, people use non-verbal behaviour to express their emotional attitudes:, the degree of like and dislike towards others, the degree of dominance and submissiveness, and, the degree of responsiveness, i.e., the intensity of positive and negative feelings aroused in them, by others., A good body posture is usually an indicator of confidence and uprightness. However, without, mental and emotional confidence, our words will sound hollow to the audience. For instance, a, used-car salesman from a dubious franchise may have a great body posture, and greet you with a, warm smile and a firm handshake. However, if in his heart he sees you as just another customer, he can take for a ride, then sooner or later, his internal conflict between what he says and what he, really thinks will cause him to trip up. His movements and gestures will start giving away his real, intentions. You will start feeling uncomfortable around him, even though you may be unable to, pinpoint why. However, if the same used-car salesman is genuinely interested in helping you find, the right car and puts your needs before his own, then his words and actions will be in harmony, with his underlying intentions and you will instinctively trust him, even though you might not be, able to identify the reason for such trust., Non-verbal communication can be divided into two categories—conscious and unintentional., When speaking of the former category, one can think of the silent pauses a speaker takes to, emphasize on some point. Also when someone does not intend to continue a conversation in the, direction it is taking, they play with their key rings or some other accessory or they avoid making, eye contact and look somewhere else. In unintentional non-verbal communication, one is not, trying to express certain feelings and thoughts but displays them involuntarily. For instance, you, might have observed that when people tell lies, they touch their face unintentionally. However,, somebody good in interpreting body language may be able to catch this., Eyes play a very important part in both intentional and unintentional non-verbal cues. When, someone gives you a cold stare, you feel unwelcome. When a speaker makes a point and looks at, you for longer than usual, he/she might be trying to say that the point is especially relevant to, you. Eyes betray feelings that people try to hide. Hand movements are also very effective nonverbal communication. Usually, hands are used more for conscious communication and do not, give unintentional cues. However, when people are tensed or worried, their hand movements, https://abdullahsurati.github.io/bscit
Page 56 :
https://abdullahsurati.github.io/bscit, , NON-VERBAL COMMUNICATION, , give away their real feelings. Even if they utter some confident words, their eye contact, facial, expressions, or gestures will reveal the truth. Hence, it is generally said that when your verbal, and non-verbal messages do not match, your listeners will rely more on your non-verbal cues., There are times when we recognize non-verbal cues without putting conscious thought into, it. For example, when someone puts their palm up, it is understood that they want to end the, conversation. Or when you are speaking, and the listener suddenly jerks their head towards you;, you know you have said something of interest., , CROSS-CULTURAL VARIATIONS, This age of globalization and information technology has entirely changed, the face of governments, businesses, and organizations. People are not, confined to the geographical walls of their own nations anymore, but, have become part of an international network. Communication being the, –Cesar Chavez, backbone of inter- and intra-organizational coordination, it is essential, for people to comprehend the linguistic and cultural differences among, organizations to get the desired results at the workplace., It is not simple to define culture in concrete terms. Culture is a complex concept, with a, variety of definitions. The dictionary meaning of the word ‘culture’ is a group or community, with which we share common experiences that shape the way we understand the world. It, consists of groups that we are born into, such as gender, race, or national origin, etc. It also, includes groups we join or become part of, or the new habits we acquire as we interact with, different people throughout our lives. Culture consists of various elements such as language,, religion, politics, etc. Let us now discuss each element individually., , ‘Preservation of one’s own, culture does not require, contempt or disrespect for, other cultures.’, , Language, Language forms the basis of all communication. It includes spoken,, written, and body language. As mentioned, we are no longer restricted, to one state or country during the course of our profession, relations,, etc. As such, we often have to deal with people who speak different, languages., Religion and beliefs, Another important element of culture is religion. An individual’s, religious beliefs and norms, sacred objects, philosophical systems,, prayers, and rituals are all parts of culture. Religion and belief affect, the communication process. For example in India, some religious, rites have become integral to our culture and have been adopted by, people from other religions. Before starting any important project, it, is a norm in India to follow certain religious rites and offer prayers. In conferences, it is observed, that before starting the deliberation, prayers are offered and lamps are lit., Values and attitudes, Different values and attitudes of individuals towards time management, decision-making,, achievement, work, change, etc. are also important parts of culture. These attributes affect, communication between people with differing values to a great extent. It becomes important, https://abdullahsurati.github.io/bscit, , 47
Page 57 :
48, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , for people of different cultures to respect and appreciate each other’s values to be able to, communicate effectively without adversely affecting their sensitivities. In the Indian culture,, e.g., little importance is attached to the personal space and privacy of an individual. For example,, when you meet someone and think of striking up a conversation, you can ask questions about, that person’s marital status or where he or she works or lives. Some South American and, Mediterranean countries also allow this liberty. On the other hand, in Western countries, such, unnecessary questions will be treated with a lot of apprehension and be considered highly, inappropriate. In India, people do not place much importance on punctuality. It is fashionable to, walk into a party late, or acceptable to dial into a teleconference five minutes later. Our Western, counterparts may look at these as signs of disrespect. Gradually, in the global workplace, people, of various cultures are learning to accept and respect each other better than they could a decade, earlier. Knowing these basic differences and shaping our reactions accordingly are essential for, overall successful communication., , Politics and law, The political system of a nation consists of national intents, power, ideologies, political risks,, sovereignty, law of the country in which the organization works, rules and regulations imposed, by the government, etc., Technology, Technology includes scientific make-up, invention, communication media, urbanization, etc., and these are all essential parts of culture. For example, with the growth of information and, communication technology, we have seen a tremendous change in the social and cultural, framework of urban India., Social organization, Social organization is an important element of culture. It consists of social institutions, the, authority structure, interest groups, and status systems, etc. All these elements constitute the, culture of a nation. For instance, maintaining eye contact with a senior during conversation, was considered disrespectful in our culture until a few years ago. However, all this is changing, in the professional world. Most organizations are adopting a corporate culture that might take, some time to get oneself aquainted with. In most multinational companies, it is okay to address, one’s senior with his/her first name. It is an American tradition, and does not show disrespect, or over-familiarity like we think it does. So, one must be cognizant of the various hidden, conventions that are prevalent in the professional world., , Significance of Understanding Culture, There are different cultural groups in the world with different patterns of behaviour, religions,, languages, politics, values and norms, etc. Thus, the same action is interpreted differently in, different nations. For example, ‘thumbs up’ in America means approval, but is considered vulgar in, Iran and Ghana (see the PowerPoint presentation on body language in the accompanying CD)., This makes clear the importance of understanding different cultures. However, when we cross, cultural boundaries, we carry our own culture with us. We must understand that our own cultural, context cannot be used to judge the standards of another. It is imperative to give importance to, another culture and not to judge others’ behaviour according to our own cultural values., https://abdullahsurati.github.io/bscit
Page 58 :
https://abdullahsurati.github.io/bscit, , NON-VERBAL COMMUNICATION, , Conducting international business requires a good understanding of the concepts of business, negotiations and ethics. Understanding varying business cultures and different values of, management and behaviour is important for success in the international market. Familiarity with, the different business practices of different nations aids in sustaining successful business relations., , SUMMARY, Non-verbal communication plays a very significant, role in effectiveness of interaction. It is important, to project oneself as positive and professional, not, just by words, but through actions as well. Nonverbal communication includes kinesics (body, movements), proxemics (space), chronemics (time),, and paralinguistic (vocal) features., , It is also essential to respect the differences in, thinking and culture while dealing with an audience, from a different cultural and ethnical background., Language, religion and beliefs, values and attitudes,, politics and law, technology, and social organization, are the various elements of culture which should be, considered to communicate effectively., , EXERCISES, 1. What is non-verbal communication? Do you think, you can manage any communication situation, just with non-verbal cues? Give situational examples., 2. How do kinesics enhance the impact of your verbal communication. Explain with examples., 3. What factors will you bear in mind while communicating with people from a different cultural or, ethnic background?, 4. Is it more likely to have communication gaps with, people from different cultural or ethnic back-, , grounds than with someone from your own background? How would you overcome these gaps?, 5. Answer the following questions:, a) Explain the role of eye contact in communication., b) What are the four different space zones according to Hall?, c) Proxemics play a prominent role in communication. Justify., , https://abdullahsurati.github.io/bscit, , 49
Page 60 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 4, , OBJECTIVES, You should study the chapter, to know, , • the importance of listening, • why some people are poor, , listeners, • the common myths about, liste-ning and guard against, them, • the traits of a good listener, • the different modes and, types of listening, • the barriers to effective, listening, • how to take notes and listen, intensively, , Active Listening, , INTRODUCTION, Imagine that a member of your team, in a meeting with potential, clients, involuntarily keeps yawning. This behaviour would obviously, put the clients off. Their professional evaluation of your organization, would be negative and they might not want to go ahead with their, business proposal. We would definitely not want someone dozing off, when we are speaking to them. Likewise, we should attentively listen, when someone else is addressing us., Listening is a very important skill. Most people are oblivious of the, time they spend in purposeful listening. Listening is quite similar to, reading, as it involves the reception and decoding of verbal messages, from another person. It is unwise to rely solely on receiving the message;, meticulous efforts should be made not only to receive these messages, but also to interpret them correctly. This is illustrated by the following, example: In a biology class, the teacher asked the students to refer to, Origin of Species by Darwin. One student sincerely rummaged through, the library bookshelves looking for Oranges and Peaches, but to his utter, dismay, he just could not find it. When narrated as a story, this sounds, funny, but in reality, we regularly come across such situations, where, confusion arises because of poor listening skills., No communication process is complete without listening. Several studies, have indicated that business people spend almost 45 per cent of their, working time in listening. According to management guru Tom Peters,, listening is an essential management and leadership skill. Similarly,, effective listening is extremely important for students, as they spend, most of their time listening to lectures. While we may not necessarily be, born good listeners, active listening skills can be learnt and developed., Sharp learners may be poor listeners and, unbelievable as it may sound,, those with imperfect hearing may still be excellent listeners. We can, define listening as follows: Listening is a process of receiving, interpreting,, and reacting to a message received from the speaker., https://abdullahsurati.github.io/bscit
Page 61 :
54, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Meaning and Art of Listening, Listening is very different from hearing. We hear numerous little sounds and noises during the, day without registering most of them. Birds chirping, cars honking, kids playing, and people, talking are examples of such sounds. We do not pay attention to these sounds because we are, not interested in them or because these sounds are not meaningful to us., ‘We have two ears and, Listening is as important as talking. Good listening involves encouraging, one mouth so that we can, the other person (the speaker in this case) by being sensitive to the, listen twice as much as we, thoughts and emotions hidden in their expressions. We also need to be, speak.’, patient while listening because otherwise we will lose track of what is, –Epictetus, being said., Listening takes a lot of energy. It is becoming a lost art, as people have stopped realizing its, importance. Most children have a very short span of attention generally as well as in classrooms,, making the job of the teacher very difficult. Like any other art, such as dancing or singing,, listening also should be practised with full dedication and concentration. One can practise by, listening to chat shows on TV and making mental notes., , Importance of Listening and Empathy in Communication, Listening is very important in the communications process. People believe that a good speaker, is essentially a good communicator, but this may not be always true. We must gauge the person’s, listening skills during a conversation. We realize the importance of listening more when a very, close person does not listen to what we say and comes up with ‘Oh! I did not get you. Can you, say that again?’ She may have reacted this way because of divided attention. In our professional, life we cannot afford to do that. If you observe a salesperson carefully, you will realize that, he/she is successful not because of his/her persuasive power in speaking but because he/she has, listened to the customer’s need carefully, which has enabled him/her to sell his/her point well., There is a close relationship between speaking and listening. Empathy plays a very important, role in listening. We must put ourselves in the speakers’ place and then listen. If we understand, the speakers’ viewpoint, apart from understanding them better, we will also be able to develop, a good rapport with them. It is very important to understand the emotions and feelings of a, person to better empathize with his/her viewpoint. We must listen without any biases and, prejudices, and be open to the views of other people., Refer to the CD for a PowerPoint presentation on listening., , REASONS FOR POOR LISTENING, There are several reasons for poor listening. We will examine these reasons in this section., , Listening training is unavailable, Most people are formally trained in the major communicative skills of writing, reading, and, speaking. While listening is a skill all of us use most frequently, it is also a skill in which we, have least formal training. While workshops and conferences provide opportunities to improve, writing and speaking skills, it is difficult to find training to sharpen listening skills., Speed of thought is more than speed of speech, Another reason for poor listening skills is that people can think faster than they can speak. Most, of us speak at the rate of about 125 words per minute. However, we have the mental capacity, to understand someone speaking at 400–500 words per minute (if that were possible). This, https://abdullahsurati.github.io/bscit
Page 62 :
https://abdullahsurati.github.io/bscit, , ACTIVE LISTENING, , How Much are You Paid for Listening?, A manager asked her secretary to keep track of the, time she spent listening on the telephone. She was, shocked to discover that her company was paying, her 35 per cent of her salary, or $18,000, for this, , function. Amazingly, on the average, people are, only about 25 per cent efficient as listeners. With this, efficiency rate, she was being paid about $13,500, for the time she spent listening inefficiently!, , difference between speed of speaking and thought means that when we listen to the average, speaker, we are using only 25 per cent of our mental capacity. We still have 75 per cent of, unutilized mental capacity. So, our mind starts wandering. This means that we need to make a, real effort to listen carefully, and concentrate more of our mental capacity on the act of listening., , We are inefficient listeners, Numerous tests confirm that humans are inefficient listeners. Studies conducted by Gail Miller, at Washington State University have shown that immediately after listening to a 10-minute, oral presentation, the average listener has heard, understood, and retained 50 per cent of what, was said. Within 48 hours, that drops off by another 50 per cent, to a final level of 25 per cent, efficiency. In other words, we often comprehend and retain only one fourth of what we hear., We all want to be more than 25 per cent efficient. It is not difficult to see the many problems, inefficient listeners can create for themselves and others. Poor listening is the cause of many, personal and professional problems., , Listening versus Hearing, When we think about listening, we tend to assume that it is basically the same as hearing., This is a misconception because it leads us to believe that effective listening is instinctive. As, a result, we make little effort to learn, or develop listening skills, and unknowingly neglect, a vital communication function. Consequently, we create unnecessary problems for others, and ourselves: misunderstandings, hurt feelings, confused instructions, loss of important, information, embarrassment, frustration, and lost opportunities. Listening involves a more, sophisticated mental process than hearing. It demands energy and discipline. Effective listening, is most often a learned skill. The first step is to realize that effective listening is an active, not, a passive, process. The belief that the power of the talker plays a major role in communication, is why many managers are poor listeners. In our society, talking is mistakenly viewed as more, important, with listening categorized as only a supportive function., , Poor Listening Habits, We often do a lot of things without thinking too much about them. These are our habits, which, have formed over many years of doing the same thing and getting by with it. The following are, some of these ingrained habits which result in poor listening., Listening but not hearing Sometimes a person listens only to the supporting facts or details, or to the way they are presented, and misses the real meaning., Rehearsing Some people listen only until they decide that they want to say something; then, they quit listening, start rehearsing what they want to say, and wait for the opportunity to jump, in and talk., https://abdullahsurati.github.io/bscit, , 55
Page 63 :
56, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Interrupting The listener does not wait to determine the complete meaning, but interrupts, so forcefully that the speaker stops in mid-sentence., Hearing what is expected People frequently hear what they expect to hear; alternatively, they, refuse to hear what they do not want to hear., Feeling defensive The listener assumes, that they know the speaker’s intention,, or why something was said; or for various, reasons, they expect to be attacked and react, defensively., Listening for a point of disagreement Some listeners seem to wait for the, chance to attack someone. They listen intently for points on which they can disagree, and then attack or confront., Labelling the subject matter uninteresting A poor listener when faced with a ‘The sales are low! We need to strategize. Call for a, known topic might find the discussion dull. brainstorming session in Goa.’, They are convinced that the topic is uninteresting, and turn to the many other thoughts and concerns stored up in their minds for just, such an occasion—to start using that unoccupied 75 per cent of their mental capacity. A good, listener, on the other hand, might start at the same point, but would arrive at a different conclusion. He/she would say, ‘That sounds like a dull subject and I do not see how it could help me, in my work. But I am here, so I guess I will pay attention and see what this person has to say., Maybe there will be something I can use.’, Criticizing the delivery or appearance of the speaker Many of us do this regularly. We tend to, mentally criticize the speaker for not speaking distinctly, for talking too softly, for reading, for not, looking the audience in the eye, etc. We often do the same thing with the speaker’s appearance., , How to Solve Problems—by Listening, Employees frequently have excellent ideas about, improving the productivity of the work environment. Managers who listen to these ideas solve, more problems than those who do not. These, managers create a sense of concern for their, staff while receiving better-quality information., Ranjan Das, the foreman of a large manufacturing plant, called in Krishnan, a supervisor of a, production line, into his office to explain the, plans for a new way to assemble machinery. Ranjan described how he thought the procedure, should be changed. Krishnan’s only response, was silence and a frown. The foreman, reading, Krishnan’s non-verbal communication accurately,, , realized that something was wrong and sensed, that Krishnan might have something to say. So, he said, ‘Krishnan, you have been in the department longer than me. What is your reaction to my, suggestion? I am listening.’ Krishnan paused and, then began to speak. He realized his manager had, opened the door to communication and felt comfortable offering suggestions from his years of experience. As the two employees exchanged ideas,, a mutual respect and trust developed, along with, a solution to the technical problems. While listening, the manager remained in complete control, of the situation. He was an active, not a passive,, listener., , https://abdullahsurati.github.io/bscit
Page 64 :
https://abdullahsurati.github.io/bscit, , ACTIVE LISTENING, , If the speaker is not dressed as we think he/she should be, we tend to not listen closely or we, may immediately classify the speaker as liberal or conservative, a hippie or boring. However, if we, concentrate on what the speaker is saying, we may begin to understand the message and may even, get interested. The message is more important than the form in which it is delivered., Becoming too stimulated Suppose we disagree with something a speaker has said. Then, following our own train of thought, we spend more time developing counter arguments, and no, longer listen to the speaker’s additional comments. We are busy formulating questions in our, mind to ask the speaker, or we may be thinking of arguments that can be used to disprove the, speaker. In such cases, our listening efficiency drops to nearly zero because of over-stimulation., So, we must hear the speaker out before we react., Listening only for facts Many of us listen only for facts and, while we may recall some, isolated facts, we miss the primary idea the speaker is trying to convey. We must ensure that our, concern for facts does not prevent us from hearing the speaker’s primary points., Trying to outline everything that is being said Many speakers are so unorganized that their, comments really cannot be outlined in any logical manner. It is better to listen, in such a case,, for the main point. A good listener knows many ways of making notes and selects the best one, to fit a speaker., , Common Myths about Listening, To better understand what it takes to be a good, listener, we must discard the following common, myths associated with listening., Myth 1 ‘I do not have to concentrate: listening comes, naturally.’, Truth Being a good listener requires a conscious effort. You, must keep your mind constantly engaged and in gear., Myth 2 ‘I am a good listener because I always get the facts, and figures straight.’, Truth You may be a selective listener. You listen to the, facts and figures, but do not hear or comprehend, the rest of the information, such as questions raised,, , emotions of the speaker, context, opinions, and ideas, discussed., Myth 3 ‘You should not interrupt when someone is speaking.’, Truth A good listener does not hesitate to interrupt if the, speaker’s information is unclear. You must be an inquisitive listener to be an effective listener., Myth 4 ‘A good listener paraphrases everything a speaker, says.’, Truth If you constantly parrot people’s statements back, to them, they will think you are slow or—even worse—, proud. It is good to repeat key information and ask the, speaker to verify it, but do not rephrase all the comments., , TRAITS OF A GOOD LISTENER, Although acquiring the skill of active listening needs much effort, it is not impossible. A few, guidelines are given in the following paragraphs. Some actions might seem unnatural and, forced but can be inculcated with practice. For instance, it is very difficult to be patient with, a speaker if he/she appears to be irrational and illogical. However, we must be tolerant in, such circumstances. The guidelines suggested here will definitely help develop an attitude of, tolerance and understanding., , Being Non-evaluative, The verbal and non-verbal behaviour of an active listener will suggest to the speaker that he/she, is being properly heard and understood. It should not, however, indicate what one thinks about, https://abdullahsurati.github.io/bscit, , 57
Page 65 :
58, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , A good conversationalist, is popular, a good listener, even more so. Talk only if, you have something to say., , the person. The purpose is to communicate, overlooking the qualities of, the ideas, attitudes, and values of the speaker. In other words, the speaker, is not to be evaluated for his/her personal qualities. Our behaviour should, convey the impression that we accept the speaker without making any, judgement of right or wrong, good or bad, suitable or unsuitable., , Paraphrasing, To clarify a point, one can simply paraphrase what the speaker has said and enquire from the, speaker whether one has heard it accurately. Use phrases like the following ones to ensure that, the information has been paraphrased correctly:, As I gather, you want to tell …, So you mean to say that …, Oh! Your feeling towards …, Do you mean that . ., , Reflecting Implications, To reflect on the implications of what has been said, it is necessary to go a bit beyond the direct, contents of the speaker, indicating appreciation of his/her ideas and what he/she is leading to., This may encourage the speaker to further extend the ideas. The listener’s aim here is to reflect, eagerness and zest by verbal or non-verbal means, thereby giving positive feedback. Phrases, such as the following can be used:, I am sure if you did that, you would be in a position to …, So this might lead to a result which …, So you are suggesting that we might …, Will that help us to alleviate the problem of …, , If this technique is used to change the direction of the speaker’s thinking, by showing one’s, cleverness in suggesting ideas that the speaker has not thought of before, it creates distrust, between the two parties. However, if the technique is used with the genuine intention of, understanding more, one can certainly help the speaker by boosting his/her confidence and, making him/her believe that the listener has grasped the content well., Attending Responses, Tone of voice can quickly, indicate if you are, interested. Use a warm,, informal, and friendly tone., Address the speaker by, his first name, whenever, appropriate., Jargon, Unless you know speakers, well enough to know their, familiarity with technical, language, avoid using, language that could be, perceived as technobabble., , Reflecting Hidden Feelings, Sometimes, one has to go beyond the explicit feelings and content of, what is being said to unravel the underlying feelings, intentions, beliefs,, or values that may be influencing the speaker’s words. The listeners must, try and empathize or identify themselves with the speaker, to experience, what they feel. One can express one’s sentiments by using phrases such as:, If I were in your place, I would not have handled the situation so well., That must have been a satisfying experience., If I were in such a situation, I would have sought the help of seniors., If that had happened to me, I would have been very upset., , In reflecting the speaker’s covert feelings, one must be careful not to, overexpose the speaker, by coaxing them to admit more than they desire., We should also avoid suggesting to the speaker that the feelings we reflect, https://abdullahsurati.github.io/bscit
Page 66 :
https://abdullahsurati.github.io/bscit, , ACTIVE LISTENING, , As a Good Listener, Use affirmative prompting through verbal or nonverbal means, where appropriate, to encourage the, speaker., Be careful with your own body language. Crossing and re-crossing your legs, slumping, or raising, , your brows can be misinterpreted by the speaker, and interrupt the flow of thought., , are what ought to be felt by the speaker in such a situation. This would make the speaker feel, evaluated. Acceptance is conveyed more by one’s manner and tone than by words. We have, already studied non-verbal communications in Chapter 3., , Inviting Further Contributions, In a situation where we have not heard or understood enough yet to respond with empathy, and understanding, we must prompt the speaker to give more information. Phrases such as the, following can be used:, Can you throw more light on …, It would be great if you can expand more on this., What happened after that?, How did you react when … ?, , While it is useful to ask questions, one should guide against asking too many. This, may lead speakers to suspect that rather than seeking information, one is interrogating or, challenging them., When we want a speaker to expand on his/her subject, we must ask open-ended questions,, which require more than a straight yes or no answer. Open-ended questions encourage a speaker, and help the listener gain more information. For instance, ‘What solutions have you thought, of?’ is open-ended, whereas ‘Have you thought of this solution?’ is not. Avoid probing and, pointed questions fired at the speaker in a dogmatic way. Open-ended questions create a more, supportive, trusting climate, which helps the communication move smoothly., The listener must keep statements and questions short and easy to understand. They should, use conversational English (say talk instead of communicate and write instead of correspond)., Above all, remember that if we are talking most of the time, we are probably not listening, very well., , Responding Non-verbally, Listeners can show active interest by adopting certain postures and sending non-verbal signals, that communicate their interest in what the speaker is saying. These include regular eye contact, (without staring), body leaning slightly towards the speaker, head nods, and a slightly tilted head, (refer to the photographs of appropriate and inappropriate body postures given in Chapter 3)., Occasionally, certain receptive utterances such as ‘yes’ and ‘ur-hum’ can also be used to indicate, that one is following what the speaker is saying, while being careful not to overdo it. Attentive, silence is more effective than too many receptive utterances., https://abdullahsurati.github.io/bscit, , 59
Page 67 :
60, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Non-verbal Techniques to Indicate Your Attentiveness, • Suitable facial expressions and natural smiles, (without excessive smiling), • Open posture (arms not crossed) and open, palms (rather than clenched fists or fidgeting), , • Appropriate distance (usually an arm’s length, away from the speaker), , By giving such non-verbal signals, the listener helps the speaker feel more confident and, reflects interest and understanding. This also helps generate more trust between the listener and, the speaker., , LISTENING MODES, People use different kinds of listening modes in different situations. The mode depends on, factors such as mood, mindset, topic, time of day, relevance, and importance. It is sometimes not, enough to just listen; we should also send positive signals to the speaker that we are with him, or her. Let us discuss the various types of listening one by one., , Active versus Passive Listening, Paying attention, We often listen to various forms of communication, in an unconscious manner. At dinner, we glance, at the television while busy eating or talking to, someone else. This is not active listening—either to, the TV or to the person we are talking to. How can, we develop the ability to listen to others patiently, and carefully? Improper listening is very harmful, as, such communication is prone to distortion. It is also, a waste of time. The responsibility of the listener is to, show keenness in the speaker’s talk through expressions,, alertness, and by asking questions about the speech, if required. By doing this, the listener will, encourage the speaker to express his/her ideas clearly and enthusiastically. If the listener looks, bored, it will discourage the speaker., Skills in this area can be improved by listening to commentaries on, Focus on the speaker. Ignore all distractions so that, TV or radio. Concentrate on the theme, supporting ideas, and also the, you can concentrate on the, digressions, if any, in the speech. Further, it is helpful to write down, speaker’s flow of thought., the gist of what we have heard. This exercise can certainly help improve, Try to ignore feelings of, listening skills., hunger, weariness, or, So far, we have emphasized on the importance of paying attention to a, discomfort. Alternatively,, you can confide your disperson’s speech. It is equally important not to neglect the physical aspects, comfort to the speaker, so, of the person. Appearance, expressions, bodily movements, and posture, that some remedy can be, are all as significant as words in conveying a meaning. A person’s body, provided (e.g., improved, language, or non-verbal communication is involuntary and, therefore,, ventilation)., more truthful. Hence, a listener should pay considerable attention to the, https://abdullahsurati.github.io/bscit
Page 68 :
https://abdullahsurati.github.io/bscit, , ACTIVE LISTENING, , physical messages conveyed by a speaker in order to assess the accuracy and sincerity of his/her, speech., If, as the listener, we feel that the speaker is being critical about us, we tend to become, inattentive, as nobody likes criticism. As a wise listener, one must look for a valid reason for the, criticism and determine the reason for the speaker’s dissatisfaction. Adopting a receptive and, constructive attitude to criticism can lead to self-improvement. We tend to listen carefully, only to those messages that are advantageous or pleasing to us, but in order to have a fruitful, conversation, we should also learn to take equal interest in speeches that contain messages of, interest to the speaker., , As a Sincere Listener, Accept your role as a listener by listening actively,, engaging positively, participating fully, and encouraging the speaker consciously., , Do not pretend to show interest. Your involuntary, non-verbal behaviour, such as glazed eye-contact, or strained expression, will give you away., , Dealing with distractions, In the process of developing active listening skills, one should train oneself to avoid physical, distractions and concentrate completely on the message. An attractive face in the room and, sometimes even the fragrance of perfume can act, as distractions. However, a careful listener has to, exercise a great deal of mental discipline to remain, focused on the message conveyed by the speaker., Often, after a period of continuous listening,, people get tired and start losing interest in the, message. They have to force themselves hard to, stay with the speech and the contents. This usually, happens because of ‘brain time’. As discussed, earlier, our minds have the capacity to understand, more than what can be said by an average, speaker in a minute. This mismatch coupled with, general disinterest leads to a wandering mind. To, overcome this difficulty, the listener should try, to stay alert by anticipating what the speaker will say next. If the listener’s, ‘The most important thing, guess turns out correct, his/her interest in the speech will revive. This will, in communication is to, enable the listener to grasp and recall the speech better., listen to what isn’t being, said.’, Since a listener’s capacity to absorb information is much more than a, –Peter F. Drucker, speaker’s ability to talk, a lot of time is available for the listener to evaluate, the message. Sometimes a listener focuses on the message in fragments, and is, therefore, unable to take in the entire message. Further, listeners also interrupt the, speaker without listening to the complete message. Careful listeners, however, never jump to, conclusions about the message unless the speaker has finished. Effective listening is possible only, if the listener patiently listens to the complete speech., A sincere listener always puts in a conscious effort by listening with a positive attitude. A, pretentious listener will show his/her attentiveness by awkward postures like resting his/her, https://abdullahsurati.github.io/bscit, , 61
Page 69 :
62, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , chin on his/her hand, or bending forward too much to show that he/she is paying a lot of, attention to the message while his/her mind is actually far away. He/she has no clue about what, the speaker is saying. Effective listening does not come easily; it requires great effort to pay, complete attention. Listeners require mental preparedness and energy to concentrate on the, speaker’s words as well as his/her non-verbal cues of communication like posture, gesture, eye, contact, facial expressions, etc., Sometimes noise distracts the attention of the listener. This should be ignored or sidetracked., If you go to your boss to discuss something and he continuously shuffles papers and talks, over the telephone, his listening will be distracted. Superiors should take care to provide an, ambience conducive to sympathetically hearing their subordinates. Proper listening will enable, the speaker to release emotional tension, which will improve the working environment of the, organization. Table 4.1 lists a few tips for effective listening., TABLE 4.1 Tips for effective listening, , Dos, , Don’ts, , • Be mentally prepared to listen., , • Pay undue emphasis to the vocabulary,, as you can use the context to, understand the meaning., , • Evaluate the speech, not the speaker., , • Pay too much attention to the accessories, and clothing of the speaker., , • Be unbiased towards the speaker by, depersonalizing your feelings., , • Prepare your responses while the, speaker is speaking., , • Fight distractions by blocking off sound, sources., , • Get distracted by outside influences., , • Be open-minded., , • Hold preconceptions and prejudices., , • Ask questions to clarify and confirm thoughts., , • Concentrate too hard., , • Paraphrase from time to time., , • Interrupt too often., , • Send appropriate non-verbal signals, from time to time, , • Show boredom even to an, uninteresting speaker., , Global versus Local Listening, To become an effective listener in multicultural settings, one must be aware of the cultural, variations involved. In the case of a foreign speaker, one must pay attention to the diction and, choice of language. One should also be aware of the possible idiomatic expressions that are, specific to any particular region. For example, ‘cover all the bases’ is an idiom originated from, baseball, a sport not known in India. So, if an American speaker uses such a phrase, the listener, shouldn’t be taken by surprise. The non-verbal conversational behaviour of people from different, countries also varies. For example, Japanese nod their head when they are in conversation to, reflect that they are just hearing; however, Americans will nod while in conversation to indicate, that they are listening attentively. Therefore, in global listening, one must make an effort to pick, up the differences in culture, politics, demography, non-verbal cues, etc. It is much different, from when you are in a local setting, listening to people you are comfortable with., https://abdullahsurati.github.io/bscit
Page 70 :
https://abdullahsurati.github.io/bscit, , ACTIVE LISTENING, , TYPES OF LISTENING, While certain skills are basic and necessary for all types of listening (receiving, attending, and, understanding), each type requires some special skills. Before we can fully appreciate the skills, and apply the guidelines, we must understand the different types of listening., , Appreciative listening, Appreciative listening is listening for deriving aesthetic pleasure, as we do when we listen to a, comedian, musician, or entertainer., Empathetic listening, As we have learnt, empathy is very important in communication, particularly in listening. A good example of empathetic listening is that practiced by nurses. So much, so that it gives a healing touch to the patient. For effective empathetic listening, one, has to feel what the, speaker is feeling. One, ‘You do not listen with just, has to appreciate the, your ears: you listen with, your eyes and with your, speaker’s, emotions,, sense of touch, you listen, circumstance, mindby becoming aware of, set, and perspective,, the feelings and emotions, and be able to provide, that arise within yourself, emotional and moral support. When a psychiatrist listens to her subject,, because of this contact, with others. You listen with, she employs empathetic listening. We must feel the person’s nerves. This, your mind, your heart, your, can be done through phrases like ‘I can understand what you have gone, imagination.’, through,’ ‘It must be difficult to face such a situation,’ etc. Sometimes the, –Egan Gerard (1988), situation is very sensitive and must be handled with caution., Comprehensive listening, This type of listening is needed in the classroom when students have to listen to the lecturer, to understand and comprehend the message. Similarly, when someone is giving you directions, to find the location of a place, comprehensive listening is required to receive and interpret the, message., Critical listening, Also known as evaluative, judgemental, or interpretive listening, critical listening involves, analysing, evaluating, and judging what is being said. Just as we formulate opinions about, people before they speak based on their physical attributes, we also tend to get judgemental, about the contents of their speech. We try to see if the person has said something based on, facts or is simply beating about the bush. This type of listening is applicable when the other, person is trying to persuade. In such cases, we try to evaluate the tone, the non-verbal signals,, and the underlying meaning of the words. We judge the argument based on our knowledge, and experience. For example, listening to a salesperson before making a purchase or listening to, politicians making their election campaign speech involves critical listening., https://abdullahsurati.github.io/bscit, , 63
Page 71 :
64, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Practice 1, Audio Clip Group 1: Listen to the two World News items and answer the following questions by, choosing the most appropriate option for each:, Clip 1: Polish President Lech Kaczynski Dies in Air Crash in Russia, 1. What is the primary source of information about the air crash?, A. ABC live, B. Russian Prime Minister, C. Russia’s Emergencies Ministry, D. Polish Foreign Ministry, 2. What is the cause of the accident?, A. Incompetent pilot, B. Dense fog, C. High speed of the aircraft, D. Unexpected rains, 3. Where was the Polish president going along with his delegation?, A. To take part in the Katyn memorial ceremonies, B. To the site at which Russian officers were executed, C. To attend a funeral, D. To pay homage to Russian leaders, 4. The ill-fated plane was a ___________ air craft., A. PI-156, B. PR-155, C. Tu-154, D. Ts-150, Clip 2: India Aims to Connect 100 Million People with Broadband Internet in the near future, 1. What was the news about?, A. Improving health, B. Improving education, C. Power to Panchayats, D. Broadband Internet, 2. Sam Pitroda is the ______________ advisor to Prime Minister., A. Education information, B. Information infrastructure, C. Health information, D. Pension scheme, 3. The broadband Internet connection will pave way for_________________, A. Better delivery system for various government schemes, B. Better food for poor people, C. Better administration, D. Better national knowledge, 4. The forecasted broadband connectivity is expected to be completed by_________, A. 2020, B. 2015, C. 2012, D. 2016, https://abdullahsurati.github.io/bscit
Page 72 :
https://abdullahsurati.github.io/bscit, , ACTIVE LISTENING, , Superficial listening, Superficial listening can be compared with hearing or passive listening. One pretends to be, listening by giving fake expressions to avoid offending the speaker. However, not much is fed, into the brain. This happens, for example, when one is forced to attend a guest lecture on an, area that is not of one’s interest., ‘You’ viewpoint, Covey says ‘Seek first to understand, and then to be understood’. This is a subtle way of saying, that we should put the other person before us. If we give the other person more importance and, avoid forcing our opinion, we can listen better. Using this ‘you’ viewpoint, we boost the speaker’s, confidence, making him/her more open to communication. Another way of achieving this is, to address the speaker by his/her name, which gives the impression that we are listening with, full attention., Refer to Payoffs of Effective Listening on the Students’ Resource., , BARRIERS TO EFFECTIVE LISTENING, In this section we will examine some common barriers to listening, which, with some practice,, can be overcome. An average person spends 70 per cent waking hours communicating, and 45, per cent of those listening. The following could be some factors that create barriers to listening., , Content, Listeners knowing too much They feel that their knowledge is so extensive that there is little, left to learn., Listeners knowing too little They tune out when faced with difficult intellectual or emotional, content. They only listen to information that conforms to their beliefs., Remedies, •, •, •, •, •, , Do not sit back passively and allow sound to enter ears., Develop a positive attitude towards the message., Anticipate the importance of the message content., Seek areas of interest in the message., Remind yourself that something of value can be learned., , Speaker, Delivery The speaker’s accent, organization, clarity, speed, volume, tone, inflections, emotions,, and appearance affect the interpretation of the message. (Refer to the telephone conversation, in the CD.), ‘When people talk, listen, completely. Most people, never listen.’, , –Ernest Hemingway, , Attitudes toward speaker Listeners are influenced more by their attitude, towards the speaker than the information presented. If the listener likes, the speaker, he/she is more likely to empathize and, therefore, comprehend, the message., Remedy, ‘how’., , Concentrate on the ‘what’ of the message, not the ‘who’ or, , https://abdullahsurati.github.io/bscit, , 65
Page 73 :
66, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Medium, Distance and circumstances Listening requires least effort when the speaker is not visible. More, effort is needed when the speaker is visible, but not physically present (e.g., a speaker on TV)., Maximum effort is needed in face-to-face interactions. This happens because the amount and, variety of both verbal and non-verbal stimuli increase. These stimuli can either help or hinder, communication., Remedy, , Realize the potential for better understanding, and increase listening effort., , Distractions, Extraneous stimuli Sounds, lights, odours, mannerisms, voice inflections, and moving, objects can easily distract listeners. Psychological studies indicate that a listener’s attention, span is sometimes not more than two or three seconds. These stimuli can be categorized as, environmental or physical, but most often psychological., Remedies, , • Identify and eradicate distractions., • If distractions cannot be eliminated, increase concentration., • Free yourself from preconceptions, prejudices, and negative emotions., , Mindset, Attitudes Attitudes are structured by a listener’s, unique physical, mental, and emotional characteristics. An individual’s mindset can either magnify, or diminish stimuli, distorting the message., Remedies, , • Strive to not let personal biases interfere with, comprehension., • Respect others’ freedom of values and beliefs., • Accept that attempting to understand another’s, viewpoint is not necessarily agreeing with it., • Realize that there may be more than one, acceptable point of view., , Language, Ambiguity Listeners rarely hear every word spoken and may attach different meanings to, words than intended by the speaker., Misinterpretation This can occur when the words used are imprecise, emotional, technical,, or overly intellectual. It occurs most often when listeners interpret words based on personal, definitions, established by background, education, and experience., Remedies, , • Realize that different words may have different meanings for different people., • Evaluate the context in which the word is used., • Remember that the meaning is in the mind, not in the word., https://abdullahsurati.github.io/bscit
Page 74 :
https://abdullahsurati.github.io/bscit, , ACTIVE LISTENING, , Listening speed, Rate The average speaking rate is 125–150 words per minute. The average listening capacity, is 400–500 words a minute, leaving a lot of excess thinking time., Think time Poor listeners use the excess time to daydream, often missing part of the message., Remedies, •, •, •, •, •, , Use the excess time to outline messages., Identify the purpose and how it is supported., Evaluate the soundness of logic; verify and integrate it with existing knowledge., Maintain eye contact to observe and interpret non-verbal signals., Formulate questions to enhance and verify understanding and provide feedback., , Feedback, Inappropriate Often, the listener ends up giving premature comments or evaluations without, a full understanding of the speaker’s viewpoint. Such comments, which may be coloured with, emotions of resentment, defensiveness, or suspicion, can hinder the speaker by confusing them, or diverting them into tangents., Remedy Supportive feedback can demonstrate interest through appropriate eye contact,, smiling and animation, nodding, leaning forward, verbal reinforcements such as ‘I see’ or ‘yes’,, and phrasing interpretations of the comments for verification. These must be timed so as to, assist rather than hinder the speaker., , Cultural barriers, Listening is tough, and more so if someone is from another culture or subculture. The, problem crops up because of the different choice of words, accents, pronunciation, and many, other intangible reasons. One must be extra careful while listening to a person from another, region or culture. In fact listening can be improved by talking to more people of different, nations and trying to understand them. (Refer to the telephone conversation in the CD.), For example,, At a hotel lobby in Tokyo:, American: I would like a room for two nights., Japanese speaker of English: For tonight?, American: No, not ‘tonight’. Two nights., , LISTENING FOR GENERAL CONTENT AND SPECIFIC INFORMATION, When listening to a speaker for general content, one’s focus should be on an overview of the, topic. Do not pay attention to the minor details and the examples, but observe the gist of it., If one is clear with the purpose of listening, one’s task will be easier. However, one needs to, concentrate even when listening for general content., Specific information is a lot simpler to collect. The method remains similar to that just, described, just that the scope is limited and efforts reduced. We can ignore the peripheral details, and look only for the keywords., https://abdullahsurati.github.io/bscit, , 67
Page 75 :
68, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Practice 2, Audio Clip Group 2: Listen to the three short audio clips based on a discussion on diabetes by a, professor with his students. Choose the best option for the following questions:, (i) What does the professor imply about many people?, A. Some people should know that sweets are unhealthy., B. Some people believe that sweets with organically grown sugar do not cause diabetes., Clip 1, C. Some people incorrectly think that sugary foods are the cause of diabetes., D. Some people already know that eating sweets can cause diabetes., (ii) What does the professor mean when he says: ‘And this can be tricky!’?, A. Controlling blood sugar levels is like performing magic., B. Maintaining healthy insulin levels throughout the day is not easy., Clip 2, C. Diabetics cannot give themselves insulin without a doctor’s assistance., D. Determining the correct amount of insulin for an injection is not difficult., (iii) Referring to question (ii), Why does the professor say this?, A. To point out to students that they may have experienced low blood sugar., B. To determine how the students manage their blood sugar levels., Clip 3, C. To determine whether there were any diabetics in the class., D. To point out an error that a student had made earlier., , Listening and Note-taking, You might have noticed that when you present a topic to your class, your teacher takes notes,, and after you complete, she refers to her notes and gives her comments on your performance., Note-taking is a process of summarizing information from spoken material. This skill requires, adequate practice. As a student, you do this exercise daily when you attend your classes. Most, probably for every subject you have a notebook in which you write the main points of a lecture., First, one has to listen to what is being said with full attention. Next, one has to recognize quickly, the main points that the speaker makes and note them down immediately. As we know, the speed, of speech is faster than the speed of writing. So some extra effort is required to keep pace with the, speaker. Unlike written material, where one has the advantage of going back and referring to it,, speeches, unless recorded, are not available afterwards, and hence require one’s complete attention., You might have found it easy to take notes during certain lectures. In such lectures, the, speaker would have given a signal when he/she was about to discuss a main point and/or a, summary of the main points. So you could quickly check the points you had noted. Some, speakers write the full text of their speech and read it before an audience. In such a case one, might procure a copy and make notes., While taking notes, one may also take down the important examples or quotations that, the speaker may use for support, illustration, or explanation. If visual material is used for this, purpose, the note-taker’s job is easier, as there is the advantage of being able to see the matter, being presented. Usually, the speakers present only the very important points visually. One need, not, however, copy everything that is presented visually. One must exercise one’s judgement and, note only the main points., , Keyword outline method of note-taking, To use this method, one needs to note the speaker’s main points and supporting evidence in a, rough outline form. Consider the following speech:, https://abdullahsurati.github.io/bscit
Page 76 :
https://abdullahsurati.github.io/bscit, , ACTIVE LISTENING, , Reports from a range of scientific disciplines are telling us with certainty that we are making a mess of the, earth, we are fouling our nest, and we have to act decisively and against our immediate inclinations for we, tend to be superstitious, hierarchical, and self-interested just when the moment requires us to be rational,, even-handed, and altruistic. We are shaped by our history and biology to frame our plans within the short, term, within the scale of a single lifetime; and in democracies, governments and electorates collude in an, even tighter cycle of promise and gratification. Now we are asked to address the well-being of unborn, individuals we will never meet and who, contrary to the usual terms of human interaction, will not be, returning the favour., To concentrate our minds, we have historical examples of civilizations that have collapsed through, environmental degradation—the Sumerian, the Indus Valley, Easter Island. They extravagantly feasted on vital, natural resources and died. Those were test-tube cases, locally confined; now, increasingly, we are one and we, are informed, reliably or not, that it is the whole laboratory, the whole glorious human experiment that is at risk., , Using the keyword outline method of note-taking, you would take the following notes:, , • Reasons for making mess of the earth, – superstitions, selfishness, hierarchies, inadequate planning, clash between governments and, electorates, , • Examples of environmental degradation, – the Sumerian, the Indus Valley, Easter Island, • Situation facing us, – ancient civilizations feasting on natural resources—localized, – now it is globalized, , Notice how brief the notes are. There are only 45 words as compared to the speaker’s 193, words, but they accurately summarize the speaker’s main points. Also notice how clear the, notes are. By separating the main points from the sub-points, the outline format shows the, relationship among the speaker’s ideas., When taking notes, the name of the speaker, the topic, and the date of the speech should, also be noted. Since notes are taken under pressure of time, it is necessary to read them, soon after the lecture is over. This would enable one to insert any omission or delete any, irrelevant matter that may have been included. Whenever one’s own short forms are used, for certain words (e.g., ‘sth’ for something, ‘sb’ for somebody, ‘exp’ for experiment), these, must be expanded soon after. It is advisable to make it a habit to use fixed short forms, so, that one does not falter in deciphering (e.g., ‘exp’ should always refer to experiment and not, experience)., , Intensive Listening, Intensive listening is required when the answer to a specific problem is required. You must have, observed that when you are listening to some popular speaker to get the answer to a particular, query, your focus is on the answer to that query, while the rest of the details are unimportant., To test your intensive listening skills, you could read the test questions first and then listen to, the passage for answers to those questions. The following practice exercise will help you practise, intensive listening., , https://abdullahsurati.github.io/bscit, , 69
Page 77 :
70, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Practice 3, Audio Clip 3: Listen to this brief lecture on the influence of climate on architecture. Take notes if, necessary and then fill in the following blanks with necessary details:, 1. Buildings in Greece have, roofs and few, openings as there is a moderate, rainfall and strong light whereas in Sweden, which has a colder climate, the buildings have, roofs., 2. Egypt has a, climate with, light and hence people constructed buildings, roofs and, windows., with, 3. In places such as Vietnam, which have river deltas, houses are often built on, to, keep them clear of the water., 4. Brick, wood, stone, and, have been the, building materials., 5., has generally been chosen for important structures because of its, and, ., 6. For constructing a lintel, it is important that the two columns are, to one another, between the columns is not more than, the width of the, and that the, two columns., , Practice 4, Audio Clip 4: Ashwin Iyer, Manager of Citibank, Bangaluru, visits credit card manufacturer, Vikram, Kumar, in Hyderabad. Over lunch they find out a little more about each other. Listen to their conversation, and fill in the following blanks:, 1. Ashwin joined Citibank, Bengaluru,, years ago., 2. Vikram hails from, ., 3. Ashwin was with the, section when he first joined Citibank., 4. Ashwin’s home town is, , known for its, ., 5. Vikram has, children, studying in, ., 6. Ashwin’s children are staying in, ., 7. Vikram’s business deals with, ., 8. Vikram moved to Hyderabad at the age of, ., 9. Ashwin was shifted to the investment section because of his knowledge on, ., 10. Vikram is visiting Bengaluru in, ., , SUMMARY, Listening is an often ignored but yet a very important communication skill. Active listening requires, the listener to understand, interpret, and evaluate what is being said. The ability to do this can, improve personal and professional relationships, remarkably by eliminating misunderstandings,, strengthening cooperation, and improving understanding. Professionals spend most of their time in, attentive listening., , Listening is different from hearing. One has to, make a conscious effort to become an effective listener. Empathy plays a very important role in listening. We must listen without any biases and prejudices, and be open to the views of other people., The reasons for poor listening include unavailability of listening training, mismatch between the, speeds of thought and speech, and inefficient listening. Listening skills can be improved by remov-, , https://abdullahsurati.github.io/bscit
Page 78 :
https://abdullahsurati.github.io/bscit, , ing the common myths about listening from our, minds. The traits of a good listener are being nonevaluative, paraphrasing, reflecting implications,, reflecting hidden feelings, inviting further contributions, and responding non-verbally. We employ, different types of listening in different situations:, , ACTIVE LISTENING, , appreciative, empathetic, comprehensive, critical,, or superficial listening. There are several barriers, to listening. Being aware of them, we can take corrective measures. Note-taking and intensive listening are important tools that can help improve, active listening abilities., , EXERCISES, 1. Define listening. How is it different from hearing?, 2. Give two instances from your personal experience, where communication failed because of poor listening skills., 3. What do you understand by the following terms?, (a) Appreciative listening, (b) Empathetic listening, (c) Comprehensive listening, (d) Critical listening, 4. Do you agree that listening is more important, than speaking? Why or why not?, 5. What are the traits of a good listener? How can, you make out if the other person is listening to, you properly or not?, 6. Discuss the barriers to listening in detail and give, suggestions to overcome each one of them., 7. If the speaker’s verbal and non-verbal cues do not, match, how it will affect your listening? Which, one will you believe then? Why?, 8. What is the correlation between listening and, taking notes? Give a few tips for effective notetaking., 9. Listening Activity 1, Form a group of 8 to 10 members with your, friends. Write down the four questions given below on a sheet of paper and circulate among the, group members. Give them one minute to go, through the questions. Now read out the passage, twice and ask them to answer these questions, briefly in their own words., Passage, Why is strategic management considered so important? It is involved in many of the decisions, that managers make. Most of the significant current business events reported in the various business publications involve strategic management., For example, on a recent day the reports of, , business events such as the proposed merger, of Lockheed Corporation and Martin Marietta,, the departure of one of Walt Disney Company’s, key executives, and the announcement of the, merger of Babbage’s and Software, are examples, of managers making strategic decisions. Also,, one survey of business owners found that 69 per, cent had strategic plans, and among those owners, 89 per cent responded that they had found, their plans to be effective. They stated, for example, that strategic planning gave them specific, goals and provided their staffs with a unified vision. Other studies of the effectiveness of strategic planning and management have found that,, generally speaking, companies with formal strategic management systems had higher financial, returns., Today strategic management has moved beyond the private sector to include government, agencies, hospitals, and educational institutions., For example, the skyrocketing costs of college education, cutbacks in federal aid for students and, research, and the decline in the absolute number, of high school graduates have forced many university administrators to assess their organizations’ aspirations and identify a market niche in, which they can survive and prosper., If an organization produced a single product or, service, managers could develop a single strategic plan that covered everything it did. But many, organizations are in diverse lines of business. For, example, General Electric is in a variety of businesses—everything from manufacturing airplane, engines and light bulbs to owning the NBC television network. The Gillette Company includes a diverse array of products ranging from blades and, razors and toiletry items to writing instruments,, stationery products, and small household and, , https://abdullahsurati.github.io/bscit, , 71
Page 79 :
72, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , personal-care appliances. Each of these different, businesses typically demands a separate strategy. Moreover, these multibusiness companies, also have diverse functional departments such, as finance and marketing that support each of, their businesses. As a result, we need to differentiate between corporate-level, business-level, and, functional-level strategies., Questions, (a) Why is strategic management considered important?, (b) According to the studies which companies had, higher financial returns?, (c) What are the other organizations apart from, the private sectors where strategic management has permeated?, (d) Why is it necessary to differentiate among the, three levels of strategy?, 10. Listening Activity 2, Ask two people, one boy and one girl, to speak, out the dialogue given below and record the, same in an audio cassette. Then play the cassette, to a group consisting of you and several others., Listen and discuss the answers to the questions, given at the end of the conversation:, Rahul: Hi Rima, I saw you at registration yesterday., I sailed right through, but you were standing in a, long line., Rima: Yeah, I waited an hour to sign up for a, distance-learning course., Rahul: Distance learning? Never heard of it., Rima: Well, it is new this semester—it is only, open to psychology. All I have got to do is watch, a twelve-week series of televised lessons. The department shows them several different times a, day and in several different locations., , Rahul: Do you not ever have to meet your professor?, Rima: Yeah, after each part of the series I have to, talk to her and the other students on the phone,, you know, about our ideas. Then we will meet on, campus three times for reviews and exams., Rahul: It sounds pretty nontraditional to me, but, I guess it makes sense, considering how many, students have jobs. It must really help with their, schedules—not to mention how it will cut down, on traffic., Rima: You know, last year my department did a, survey and they found out that 80 per cent of all, psychology majors were employed. That is why, they came up with the programme. Look, I will be, working three days a week next semester, and it, was either cut back on my classes or try this out., Rahul: The only thing is … does not it seem impersonal, though? I mean, I would miss having class, discussions and hearing what other people think., Rima: Well, I guess that is why phone contact is, important. Anyway, it is an experiment. Maybe I, will end up hating it., Rahul: Maybe, but … I will be curious to see how it, works out., Questions, (a) Where did the man see the woman the, previous day?, (b) How is the distance learning course different, from traditional courses?, (c) What do the speakers agree is the major, advantage of the distance learning course?, (d) Why did the woman decide to enrol in the, distance learning course?, (e) What does the man think is a disadvantage of, distance learning?, , https://abdullahsurati.github.io/bscit
Page 80 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 5, , OBJECTIVES, You should study the, chapter to know, , • how to enhance the, , effectiveness of your, speaking, • the basic sounds of English, • how to use phonetic, transcription, • the rules of pronunciation, and the problem sounds, • how to employ appropriate, word stress, sentence, stress, and intonation, patterns for effective oral, communication, • how to overcome, nervousness, if you have any,, while speaking, • how to be clear and fluent in, your speaking, • types of vocal cues, , Effective Speaking, , INTRODUCTION, Now that we have learnt the importance of listening, let us move on to the, next important communication skill of speaking. Speaking effectively, and powerfully is a skill that is really worth learning. Regardless of the, expertise or responsibility at work, everyone will eventually be expected, to give a presentation or make a speech. We may be asked to talk to, colleagues, clients, suppliers, or the general public., For effective oral communication, a basic understanding of the, sound system of the English language is very important. The ability, to produce individual sounds, both in isolation and in combination, with other sounds, also plays a significant role. Pronunciation is far, more important than the accurate production of individual sounds., Pronunciation is the way a word or a language is usually spoken or the, manner in which someone utters the words of a language., This chapter gives an insight into the sound system of English as, well as facilitates our understanding of effective speaking., , BASIC SOUNDS OF ENGLISH, A phoneme is any one of the set of smallest units of speech in a language, that distinguishes one word from another. Changing one phoneme in a, word can produce another word, or make the word unintelligible. For, example, changing the first phoneme in the word ‘cat’ can produce a word, with a very different meaning, such as ‘rat’. A phoneme is represented, between slashes ( /b/, /k/, /s/, etc.) by convention. The number of, phonemes varies widely according to the language. Languages can, contain two to thirty vowels and five to more than 100 consonants., In most written languages, a one-to-one corres-pondence between, letters and phonemes does not exist. That is, there are (i) some letters, that can represent more than one phoneme (but only one at a time), and/or (ii) some phonemes that can be represented by alternative, individual letters and/or some combination(s) of letters., https://abdullahsurati.github.io/bscit
Page 81 :
74, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , The English alphabet has twenty six, letters and these represent forty four, distinct sounds of English. For example,, ‘c’ in ‘car’, ‘k’ in ‘kite’, ‘cc’ in ‘occasion’, and, ‘ch’ in ‘chemist’ all represent the same, sound /k/. Similarly, different sounds, are represented by ‘ch’ in words such, as ‘chemistry’, ‘machine’, ‘attach’, etc., Further, certain letters do not represent, any sound. For example, ‘e’ in ‘mine’,, ‘t’ in ‘listen, ‘p’ in ‘psychology’, and ‘h’ in, ‘hour’ do not represent any sound—, they are silent. There are also letters that, 'C' mon boy! Put the cheese down and pull the keys out.', represent sounds not even hinted by the, graphic sign. For example, ‘gh’ in ‘enough’, represents the /f/ sound, ‘x’ in ‘examine’ stands for /gz/, and ‘y’ in ‘city’ is for the /i/ sound. This,, however, does not mean that there is no system of classification of English sounds. In fact, a very, comprehensive and scientific description of these sounds has been made. A symbol from the, internationally accepted system of signs is used to represent each sound. These symbols belong, to the International Phonetic Alphabet (IPA). IPA is a system of phonetic notation devised, by linguists to provide a standardized, accurate, and unique way of representing sounds of any, spoken language. It is also used in some dictionaries and textbooks to indicate pronunciation., There are various ways in which sounds can be classified., Oral and nasal Sounds are produced by the speech organs by forcing the air stream out, of the lungs either through the mouth or the nose. All sounds are either oral or nasal. In the, production of the former, the air is released through the mouth, whereas, in the latter, it is, released either fully or partially through the nose., Voiced and unvoiced Sounds are either voiced or unvoiced. All sounds produced with, the vibration of the vocal cords are called voiced sounds. For example, vowels, diphthongs, (combinations of two vowel sounds or vowel letters), and consonants such as /b/, /d/, and /m/, are voiced sounds. In the production of unvoiced sounds such as /p/, /t/, /k/, /s/, etc., on the, other hand, the vocal cords do not vibrate and the air passes through the wide-open glottis. The, vibration can be felt by putting the palm of the hand on the Adam’s apple., Vowels and consonants Sounds are also classified as vowels and consonants on the basis of, manner and place of production. In English, all the vowels are oral and voiced. Among the, consonants, only three are nasal: /m/, /n/, and /ŋ / (as in ‘sing’). Several oral consonants are, unvoiced. The list of sounds of English is given in Tables 5.1 and 5.2. Now, let us study vowels, and consonants in some detail., , Vowels and Consonants, Consonants are, distinguished from, vowels by their manner of, production., , During the production of vowel sounds, the air from the lungs comes, out in an unrestricted manner in a rather continuous stream. There is no, closure of the air passage or friction between any speech organs. There are, twenty distinct vowel sounds in English. These twenty vowels are further, classified as pure vowels and diphthongs. A pure vowel is a single sound, https://abdullahsurati.github.io/bscit
Page 82 :
https://abdullahsurati.github.io/bscit, , EFFECTIVE SPEAKING, , TABLE 5.1 Vowel sounds, , IPA symbols, , Words, Middle, field, hill, step, man, mask, , Final, see, duty, —, —, car, , Sl. No., 1., 2., 3., 4., 5., , /i:/, /Ι/, /e/, /æ/, , 6., , /ɑ:/, , Initial, easy, it, enemy, apple, art, , /ɒ/, , office, , cross, , —, , /ɔ:/, /Ʊ/, /u:/, /^/, , born, book, fool, sun, bird, , saw, to, true, —, stir, , police, snail, , maker, say, , hope, bite, , so, buy, , /ɔɪ/, , all, —, ooze, under, earth, about, eight, old, idea, out, oil, , sound, noise, , cow, boy, , /ɪə/, /eə/, /Ʊə/, , ear, air, —, , hear, , mere, , hairy, cured, , share, poor, , 7., 8., 9., 10., 11., , /ɜ:/, /ə/, , 12., 13., , /eɪ/, /əƱ/, , 14., 15., , /aɪ/, /aƱ/, , 16., 17., 18., 19., 20., , The first twelve sounds are called pure vowels and the remaining eight diphthongs., TABLE 5.2 Consonant sounds, , Sl. No., 1., 2., 3., 4., 5., 6., 7., , IPA symbols, /p/, /b/, /t/, /d/, /k/, /g/, , 8., , /dʒ/, /f/, /v/, /q/, /ð/, /s/, /s/, /z/, , 9., 10., 11., 12., 13., 13., 14., , /tʃ/, , Description, unvoiced, oral, voiced, oral, unvoiced, oral, voiced, oral, unvoiced, oral, voiced, oral, unvoiced, oral, , Initial, pen, bet, time, day, call, gate, church, , Words, Middle, speak, about, better, adorn, echo, ago, butcher, , voiced, oral, , judge, , adjust, , age, , unvoiced, oral, voiced, oral, unvoiced, oral, voiced, oral, unvoiced, oral, unvoiced, oral, voiced, oral, , five, vine, thin,, then, some, some, zoo, , after, averse, atheist, other, biscuit, biscuit, dozen, , enough, nerve, oath, clothe, cots, cots, buzz, , https://abdullahsurati.github.io/bscit, , Final, leap, nib, beat, said, ask, league, attach, , (Contd), , 75
Page 83 :
76, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , TABLE 5.2 (Contd), , Sl. No., 15., , IPA symbols, , 16., , /ʒ/, /h/, /l/, /m/, /n/, /ŋ/, /r/, /w/, /j/, , 17., 18., 19., 20., 21., 22., 23., 24., , /ʃ/, , Description, unvoiced, oral, , Initial, shape, , Words, Middle, ashamed, , Final, bush, , voiced, oral, , genre, , pleasure, , mirage, , unvoiced, oral, voiced, oral, voiced, nasal, voiced, nasal, voiced, nasal, voiced, oral, voiced, oral, voiced, oral, , hat, lottery, mat, nest, —, rest, want, university, , behave, along, among, sound, hanging, screech, question, student, , ah, bottle, balm, bin, sing, ever, —, —, , The sound represented by the letter ‘r’ is pronounced only when it is followed by a vowel sound in, the same word or when the word immediately following it begins with a vowel sound. For example,, in ‘heart’, it will not be pronounced, whereas in ‘real’, it will be. Similarly, in expressions such as ‘the, mother of Ram’, ‘remember it’, and ‘later on’, it will be pronounced because it is followed by words, beginning with vowel sounds /ə/, /i/, and /ɒ/., , marked by its steady quality. During the production of a pure vowel, its, quality does not change. In the production of a diphthong, on the other, hand, one sound position glides to another, as a result of which the quality, of the vowel changes. For example, /i:/ is a pure vowel as in ‘feet’, whereas, /a I/ is a diphthong as in ‘fight’., While pronouncing consonants, the air passage is either completely or partially closed and, the air passes through the speech organs with an audible friction. There are twenty four distinct, consonants in English. Tables 5.1 and 5.2 present a list of vowel sounds and consonant sounds with, examples., You can listen to the vowel and consonant sounds in the CD. Table C5.1 in the CD gives, examples to show the diversity in the spelling–sound relationship., The following material in the form of minimal pairs, i.e., a set of two words distinguished by, only one sound, will further help one recognize and pronounce words., of the first, the lips are kept in a neutral, In producing both the sounds in the, (i), position, whereas rounding them is, following pairs, the lips are rounded, essential for the second., but the first one is shorter., , Consonants are, distinguished from, vowels by their manner of, production., , /ɒ/, , (ii), , /ɔ:/, , don, dawn, cot, caught, shot, short, pot, port, cod, cord, In the following pairs, both the, sounds are long but in the production, , /ɑ:/, , cart, barn, card, car, bar, hard, darn, , https://abdullahsurati.github.io/bscit, , /ɔ:/, , court, born, cord, core, bore, hoard, dawn
Page 84 :
https://abdullahsurati.github.io/bscit, , (iii), , The first sound is shorter and in, producing it the lips are in a neutralspread position. The second is produced from the centre of the mouth, with the lips in a neutral position., , first is produced from the front of the, mouth with the tip of the tongue touching, the upper teeth ridge, whereas the second, is produced from the back of the mouth., , bust, burst, bud, bird, hut, hurt, cut, curt, thud, third, such, search, In articulating the first sound the (vii), lips are rounded and then spread., In the production of the second, the, mouth is widely opened with the, lips moving from neutral position to, loosely spread position., /ai/, /ɔi/, , sin, sing, kin, king, ran, rang, ban, bang, ton, tongue, sun, sung, In producing both the sounds, the air is, released without vibrating vocal cords and, by keeping the lips in neutral position., However, the first is produced from the, front of the mouth, whereas the second is, produced from the centre., /s/, /∫/, , /ʌ/, , (iv), , (v), , (vi), , EFFECTIVE SPEAKING, , /ə:/, , /n/, , /ŋ/, , sake, shape, boy, buy, same, shame, toy, tie, sign, shine, voice, vice, save, shave, toil, tile, mess, mesh, point, pint, In the production of the first sound, (viii) The sounds /z/ and/ʒ/ are produced, like /s/ and /∫/ respectively, but in their, the air is blocked in the mouth and, production the vocal cords vibrate. It is, then suddenly released by a slight, not possible to give minimal pairs for, separation of the lips. In the second,, contrasting them as there are no words, the air is released by pressing the lower, to distinguish them by the opposition of, lip against the upper front teeth., these sounds alone., (ix) The first sound is articulated like /f/ but, /f/, /p/, it is voiced. In producing the second, the, fat, pat, lips are first sounded and then spread., fen, pen, /w/, /v/, fail, pale, wet, vet, fast, past, worse, verse, four, pour, wail, veil, furl, pearl, wine, vine, went, vent, In producing both the sounds, the air, is released partially through the nose, and partially through the mouth. The, https://abdullahsurati.github.io/bscit, , 77
Page 85 :
78, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Practice 1, Speak out the following 175 words as correctly as possible. Identify and encircle the words containing, any of the long vowels (/i:/, /ɑ:/, /ɜ:/, /u:/, /ɔ:/). Try to find out the meaning of those words that you have, not come across so far:, acid, arch, achieve, allergy, ache, afternoon, aunt, agree, blue, burn, bend, boom, bath, brought,, bathe, beat, caught, catch, cut, cure, come, calm, cute, curfew, czar, dance , dull, doom, deprive,, dearth, diesel, dense, door, eight, ever, eel, English, fight, fill, fool, first, forty, fever, girl, gate,, grass, gum, groom, geese, horse, hill, hoot, hurt, heaven, heal, ink, item, irk, immune, ice cream,, idea, implant, jar, jelly, jeep, joy, jute, knell, kneel, loop, life, lean, love, last, license, look, lord,, loom, loyal, learn, make, mark, mourn, manage, many, mute, meat, merchant, mean, magazine,, normal, neat, nagging, news, nark, nation, oodles, ointment, oil, orbit, overt, organic, pen,, peel, pan, porch, polite, parole, pearl, pending, pool, palm, root, rain, rack, ruin, reach, rancid,, redeem, reserve, rinse, return, sit, same, seal, serve, sober, scourge, seamless, skew, sore, soothe,, tea, tempt, torn, token, tool, tight, turn, total, toll, task, ultra, ugly, unclean, unbound, umpire,, umbrage, uproot, vaccine, vain, vault, vast, venal, verbose, vibrant, victorious, volume, verdict,, vase, video, wooden, work, wallet, wall, welcome, watch, water, worth, woo, wolf, wobble, who, TABLE 5.3 Phonetic transcriptions, of some words, , Phonetic Transcription, , As discussed earlier, English has twenty vowel sounds and twenty, four consonant sounds that can be represented through IPA symbols., We have also learnt that there is no one-to-one correspondence, /faɪnd/, find, between many letters and the sounds they represent. For instance,, low, /ləƱ/, in the word ‘chemistry’, the letters c and h are together represented, speak, /spi:k/, by the consonant /k/. Similarly, the sound /∫/ represents the letter, image, /imeɪdʒ/, s in the word ‘sugar’ and /q/ represents the letters th in the word, icon, /aɪkon/, ‘thief ’. Such sounds may pose problems in pronouncing the words, correctly, and hence it is necessary to refer to the dictionary to, /ɪŋglɪʒ/, English, learn the correct pronunciation. Most dictionaries include the, /læŋgwɪdʒ/, language, phonetic transcription or the representation of a word in terms, /eɪm/, aim, of its phonemes or sounds. Such a transcription alone can tell us, bags, /bægz/, how to pronounce a word because knowing just the spelling of a, passed, /pɑ:st/, word does not ensure the right pronunciation, as some letters and, excellent, /eksələnt/, sounds may not match. Generally, dictionaries use IPA symbols, for phonetic transcriptions, as shown in Table 5.3., doctor, /dɒktər/, Transcribing the words phonetically may be quite interesting,, epic, /epɪk/, provided we are familiar with all the phonemes represented, chalk, /tʃɔ:k/, by the IPA. After we transcribe a word according to the way, stadium, /steɪdiəm/, we pronounce it, it can be verified with the dictionary. In this, manner we can learn the correct pronunciation faster. Orthography refers to the spelling of a, word., Word, , Phonetic, transcription, , Practice 2, Convert the following phonetic transcriptions into orthography., ʌndərstænd, ɑ:skt, lu:s, maɪt, rɒndɪvu:, kləƱz, kənsi:d, dɔ:nt, fətɒgrəfər, ðən, https://abdullahsurati.github.io/bscit
Page 86 :
https://abdullahsurati.github.io/bscit, , EFFECTIVE SPEAKING, , Rules of Pronunciation, The production of individual sounds does not follow a set pattern. It has to be learnt through, intensive practice. However, the inflectional endings -s or -es and the past (tense) markers -d or, -ed follow a regular pattern. Their pronunciation is guided by the following rules:, (a) The inflectional endings -s or -es are pronounced in three different ways:, (i) /iz/ after the consonants /s/, /z/, /∫/, /ʒʒ/, /t∫/, and /dʒ/, , Examples: classes, raises, brushes, mirages, catches, edges, (ii) /s/ after the consonants /p/, /t/, /k/, /f/, and /q/, , Examples: maps, boats, locks, roofs, oaths, (iii) /z/ after all other consonants and all vowels, , Examples: bombs, cubs, pads, leaves, buys, feathers, clues, keys, cures, ties, etc., (b) The past markers -d or -ed are pronounced in three different ways:, (i) /id/ after the consonants /t/ and /d/, , Examples: quoted, bounded, (ii) /t/ after the consonants /p/, /k/, /tʃ/, /f/, /q/, /s/, and /ʃ/, , Examples: hopped, poked, matched, coughed, earthed, blessed, blushed, (iii) /d/ after all other consonants and all vowels, , Examples: clubbed, hugged, paved, erased, edged, called, named, cried, favoured,, cured, etc., (c) There are a few word-endings that are sometimes mispronounced. The correct, pronunciations of these endings have been provided herewith:, (i) -age → /idʒ/ and not /eɪdʒ/, , Examples: adage, cabbage, savage, (ii) -ate → in adjectives → /ət/ and not /eɪt/, , Examples: intimate, penultimate, delicate, -ate → in verbs → /eit/, , Examples: cultivate, punctuate, differentiate, (iii) -ance/-ence, -ant/-ent → vowel /ə/ and not /e/ or /æ/, , Examples: disturbance, preference, arrogant, agreement, (iv) -cian → /ʃn/ and not /ʃian/, , Examples: magician, politician, technician, (v) -est/-et → vowel /i/ and not /e/, , Examples: finest, boldest, socket, pocket, (vi) -cial, -sial, and -tial → /ʃl/ and not /ʃiəl/, , Examples: social, controversial, preferential, (d) ‘ng’ is pronounced in the following ways:, (i) In final position ‘ng’ is always pronounced as /ŋ/ and never /ŋg/, , Examples: bang, ring, lung, speaking, reading, writing, (ii) In medial position ‘ng’ is pronounced in two different ways:, /ŋ/ only in the words formed from verbs, , Examples: singer, bringer, ringer, Also, /ŋ/ only when the plural marker -s is suffixed to nouns ending in /ŋ/, , Examples: flings, things, songs, (iii) /ŋg/ in all other cases, , Examples: linger, finger,, hunger, https://abdullahsurati.github.io/bscit, , 79
Page 87 :
80, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Practice 3, Speak out the following words keeping in mind the rules of correct pronunciation for past tense words, and plurals. Then group them under the appropriate phonemes given thereafter., acted, added, affected, aided, amused, arms, asked, belts, bended, birds, bloated, books, boxes,, branded, buses, cars, classes, clothed, combs, cooked, coughed, counted, cried, crossed, danced,, days, doomed, drinks, earned, ended, eyes, faces, faded, fetched, flouted, friends, fused, guessed,, hands, hated, hedges, helped, hooted, hoped, hops, hushed, laughed, legs, lifted, lived, loaded,, loads, loaves, looked, marked, mashed, masked, missed, mixed, needed, noses, pads, painted,, parked, passed, phones, pieces, planes, planned, played, plays, poked, prizes, pubs, queued,, rebelled, rested, rolled, scored, senses, shops, shouted, smiled, soaked, songs, sounded, started,, subjects, switches, talked, topped, touched, uses, walked, wanted, weighed, winds, wished, /d/, /id/, /t/, /s/, /z/, /iz/, , Problem Sounds, Go through the following dialogue:, , Speaker 1: Did you like the test of our copy?, Speaker 2: What do you mean? Which test and copy are you talking about?, Speaker 1: The copy you have just now finished!, Speaker 2: Oh! Your coffee! It tastes so well. Thank you., , Such confusions can arise when, e.g., Indians speak English with the various accents used in their, mother tongues, because many sounds of their language may differ from the sounds of English., Some of the sounds in English are similar to the sounds in the Indian languages. For instance, the, sounds /p/, /b/, /t/, /d/, /k/, /g/, /m/, /n/, and /r/ may not pose much of a problem for Indian speakers, of English. However, they face problems with the other sounds that they do not use in their regional, languages., Among English consonant sounds, fricatives (sounds made by narrowing the air passage at, some place in the mouth so that the air, while escaping, causes audible friction) pose problems, for Indian speakers. Some of the fricatives that pose problems are /f/, /v/, /q/, /ð/, /z/, /ʃ/, and, /ʒ/ as shown in Table C5.2 in the CD., In some Indian languages, many words end with a vowel, sound, and hence speakers of these languages tend to add, a vowel sound even at the end of English words. Similarly,, in some Indian languages, consonant clusters (explained in, the next section) are rare in the beginning of words, and, hence these speakers insert a vowel sound at the beginning of, consonant clusters in English words too., Examples, , Root: /ru:t/ becomes /ru:tu/ or /ru:tə/, Scheme: /ski:m/ becomes /iski:m/ or /ski:mi:/, , 'Thees is e lame daak gorment.', , As against the twenty vowel sounds in English, Indian, English has only seventeen, out of which eleven are pure vowels, and six are diphthongs. Hence, problems arise for Indian, speakers in producing certain vowels too (see Table 5.4)., https://abdullahsurati.github.io/bscit
Page 88 :
https://abdullahsurati.github.io/bscit, , TABLE 5.4 Problem vowels, , Word, , English, usage, , Indian usage, , Date, , /deɪt/, , /det/, , Post, , /pəƱst/, , /post/, , Court, , /kɔ:t/, , /kort/, , Bird, , /bɜ:d/, , /bəd/, , Bud, , /bʌd/, , /bɑ:d/, , Tour, , /tƱə/, , /tu:r/, , Hurt, There, , /hɜ:t/, /ðeər/, , /hut/, /ðer/, , Ball, , /bɔ:l/, , /bɑ:l/ or /bɔl/, , EFFECTIVE SPEAKING, , Practice 4, Speak out the following sentences and check in the dictionary, whether you have uttered the words set in italics correctly., 1. She is very tall., 2. I have great pleasure in welcoming you., 3. Please bring a dozen bananas., 4. I wish to keep a bird as my pet., 5. Birds of the same feather flock together., 6. All his kith and kin were present at the party., 7. Do you want me to go now?, 8. Have you taught me this lesson?, 9. Let him take all these chairs., 10. Rain, rain, go away., , Please refer to the CD for more practice on pronunciation. You can strengthen your, knowledge of the sounds of English by referring to the following websites:, http://www.antimoon.com, http://fonetiks.org, http://www.learnenglish.de/, http://www.englishmedialab.com/pronunciation.html, http://cambridgeenglishonline.com/Phonetics_Focus/, , WORD STRESS, Accent or stress is an important aspect of spoken English. Developing effective word accent, and sentence accent is very important to speak intelligible English. The following discussion, would enable one to understand the concepts pertaining to syllables, word stress, and sentence, stress, which are necessary to speak English effectively with the right accent., When we speak, the air from our lungs does not come out in a continuous stream but in, small puffs, each puff of air producing a syllable. Such puffs require greater muscular strength, when an accented or stressed syllable is produced. Thus, an accent is the prominence or the, relatively greater emphasis given to a particular syllable in the word. In a multisyllablic word,, one particular syllable has generally greater stress than the others., Accent is of two types: primary accent and secondary accent. The primary accent is shown by, a vertical bar above and in front of the accented syllable, e.g., a’broad, examination, etc., and, the secondary accent is shown by a vertical bar below and in front of the accented syllable, e.g.,, ‘calcu ’late, e’xami’nation, etc., It is difficult to give a comprehensive list of rules for accenting words. However, the following, rules can help one get the proper accent., (a) If a word ends with -ion or -logy, the syllable preceding these endings is accented., , Examples: ex-hi-'bi-tion, ter-mi-'na-tion, an-thro-'po-logy, bi-'o-lo-gy, etc., (b) If an adjective ends with -ic, the main accent is normally on the second syllable from the, end., , Examples: a-'to-mic, sym-'bo-lic, etc., https://abdullahsurati.github.io/bscit, , 81
Page 89 :
82, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , (c) If a verb ends with -fy, -ate, -ize, -ise, or -yse, the main accent is on the third syllable, from the end., , Examples: ex-'em-pli-fy, ‘i-mi-tate, 'fac-to-rize, e-'co-no-mize, 'a-na-lyse, etc., (d) If an adjective ends with -ical, the main accent is normally on the third syllable from the, end., , Examples: psy-cho-'lo-gi-cal, 'gra-phi-cal, etc., (e) If a word consisting of three or more syllables ends with -ity, the main accent is on the, third syllable from the end. If it has only two syllables, the main accent is on the first, syllable., , Examples: 'en-mi-ty, ac-'ti-vi-ty, 'ci-ty, 'pi-ty, etc., (f ) If an adverb ends with -ically, the main accent normally falls on the fourth syllable from, the end., , Examples: geo-'gra-phi-ca-lly, 'lo-gi-ca-lly, etc., (g) If a word ends with -ee, -eer, or -ette, the main accent normally falls on the last syllable., , Examples: em-plo-'yee, auc-tion-'eer, ci-ga-'rette, etc., There are some words in which a mere shift in accent changes their class. A few examples, are given below:, Noun, Verb, 'Conduct, Con'duct, 'Object, Ob'ject, 'Project, Pro'ject, 'Progress, Pro'gress, 'Contact, Con'tact, , Weak Forms, The weak form of a word is used when the word has no stress and is phonetically distinct from, its strong/full form. A weak form is an unstressed syllable. A word may have multiple weak, forms or none., There are about 45 words in English with two or more pronunciations—one strong, pronunciation and one weak pronunciation or weak form. Words of this kind may be called, weak form words. Since almost all native speakers of RP use weak forms in their pronunciation,, it becomes difficult for a learner of RP to understand without learning those words properly., The main words with weak forms in RP are:, a, am, an, and, are, as, at, be, been, but, can, could, do, does, for, from, had, has, have, he, her,, him, his, just, me, must, of, shall, she, should, some, than, that, the, them, there, to, us, was, we,, were, who, would, you, These words are also known as function words—words that do not have a dictionary meaning, in the way we normally expect nouns, adjectives, verbs, and adverbs to have. Words such as, auxiliary verbs, conjunctions, pronouns, prepositions, articles, etc., fall into this category, all of, which are pronounced in their strong forms in certain circumstances but are more frequently, pronounced in their weak forms. There are certain contexts where only the strong form is, acceptable and others where the weak form is generally used., Examples:, And:, , full form: /ænd/; weak form: /nd/, /n/, /nd/, /n/., bread and butter (weak form), https://abdullahsurati.github.io/bscit
Page 90 :
https://abdullahsurati.github.io/bscit, , EFFECTIVE SPEAKING, , You should not put ‘and’ at the end of a sentence. (Full form), Can:, full form: /kæn/; weak form: /kən/, Malini can speak English better than I can. (The first can is the weak form while the second is the full, form.), Of:, , full form: /ɔ:v/; weak form: /əv/, I am fond of fruits. (Weak form), Fruits are what I am fond of. (Full form), , Have:, , full form: /hæv/; weak form: /əv/, Have you finished? (Weak form), Yes, I have. (Full form), , Should: full form: /ʃud/; weak form: /ʃd/, I should forget it. (Weak form), So you should. (Full form), To:, , full form [tu:], [tu] before vowels; weak form: [tə] before consonants, It is time to act. (Full form), Try to stop. (Weak form), , His:, , full form: /his/; weak form: /is/, His name was mentioned. (Full form), Give me his books. (Weak form), , Some:, , full form: /sʌm/; weak form: /səm/, Have some more coffee. (Weak form), I have got some. (Full form), , Practice 5, Mark the primary stress in the following words:, tunnel, deafening, teacher, yesterday, physiology, examination, interview, laboratory, economic,, effectively, , SENTENCE STRESS, Look at the following sentence., This acid is very harmful., , Try and speak this sentence without stressing any word. Your utterance may not send the, intended meaning to your listener. But when you give emphasis on ‘this’ the importance is on, the kind of acid. When you stress the word ‘very’, the importance shifts to the nature of the, harm., In English sentences, each word does not have the same prominence and some words stand, out from the rest due to stress or greater breath force. Just as in a single polysyllabic word, one, syllable gets more stress than the others, in a sentence one or two words get more emphasis than, the others. The following are some sentences in which stressing on different words may intend, different meanings., This is the latest book I have read., The company produces ten thousand cars every day., I want you to look into this matter., I must start in ten minutes., https://abdullahsurati.github.io/bscit, , 83
Page 91 :
84, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Practice 6, Underline the word or words you would like to give emphasis on in the following sentences:, 1. He is a charming fellow., 15. It is a disappointing and unconvincing, 2. He was not by himself when I saw him., play., 3. Give yourselves plenty of time., 16. They have got a lovely little house in the, 4. You will not hurt me, you’ll only hurt, country., yourself., 17. Did the boys see the teacher after the, 5. That is what I told you., class?, 6. These are the best., 18. He is a fellow I do not like., 7. Do you like these flowers?, 19. Somebody must have lost it., 8. Is the book on the table a good one?, 20. Has anything been done for it?, 9. That is the thing I wanted., 21. There is not much time., 10. I did not mean the channel, I meant just, 22. He must be either stupid or careless., a channel., 23. He made a long, boring, and depressing, 11. Has she brought any sugar?, speech., 12. I want some more., 24. Do not forget your homework., 13. Any newspaper will do., 25. We are not going., 14. Have you done anything yet?, , Sentence Rhythm, English is a rhythmic language, rhythm being a feature of the phonological structure of English., Rhythm generally refers to the timing pattern. There are two factors that influence the rhythm, of English: sentence stress and connected speech. Maintaining a rhythm in a speech makes the, speech sound natural and fluent., Words are of two types: content or lexical words and function or grammatical words. The, content or lexical words carry meaning by themselves, whereas function or grammatical words, do not have any significant meaning in themselves and depend on the content words to derive, meaning. Sentences contain both content and function words. Content words that include, nouns, verbs, adjectives, and adverbs are strong words and carry stress in a sentence, while, function words that include determiners, pronouns, prepositions, conjunctions, auxiliary verbs,, and interrogatives are weak and unstressed words., The rhythm produced by the stressed and unstressed words in a sentence is a major, characteristic of spoken English. Using only the strong forms (i.e., stressing all the words) in, sentences may make a speech sound dull and artificial. The listener also may not understand the, intended emphasis or meaning in the speech., Just as sentence stress, speed is another very important factor in the fluency of English. When, we speak, we do not speak words in isolation but group them and speak without any pauses, between them. Unstressed words always sound different when used in a sentence as against when, used in isolation. The most common feature of connected speech is the weak forms of function, words such as of, have, was, were, to, has, etc., and contractions such as can’t, haven’t, shouldn’t, won’t,, didn’t, they’ve, etc. However, we ignore other features, namely elision (losing sounds as in the, word listen), linking (adding or joining sounds between words (as in ‘far away’), and assimilation, (changing sounds when two words are combined as in ‘good girl’), that help preserve rhythm, in our utterances. In addition to these features, there is schwa—the most common vowel sound, spoken in unstressed words in English (as the sound /ə/ in ‘ago’, ‘about’, etc.)., https://abdullahsurati.github.io/bscit
Page 92 :
https://abdullahsurati.github.io/bscit, , EFFECTIVE SPEAKING, , Read aloud the following excerpt from the famous Gettysburg address by Abraham Lincoln, to understand how rhythm works in English language and makes a speech look natural and, fluent., , Fourscore and seven years ago, our fathers brought forth on this continent a new nation, conceived in liberty, and dedicated to the proposition that all men are created equal. Now we are engaged in a great civil war, testing, whether that nation or any nation so conceived and so dedicated can long endure. We are met on a great, battlefield of that war. We have come to dedicate a portion of that field as a final resting place for those who here, gave their lives that that nation might live. It is altogether fitting and proper that we should do this., , Parallel grammatical structure, placing important ideas in the beginning or at the end, using, subordinating conjunctions for less important ideas, using appositive and absolute phrases to, add details to the main idea—all these bring in rhythm in a speech., It is important to know which words are to be stressed in a sentence and which syllables, of polysyllabic words are to receive primary accent depending on the rhythmic balance of the, sentence and the relative importance of its different parts. Consider the following sentences:, 1., 2., 3., 4., , You ‘ought to’ know the ‘way to ‘use a ‘pen., I ‘wish I ‘could., ‘What an ‘interesting ‘story!, You could ‘make a ‘point of ‘telling him., , In the first and second sentences, one unstressed syllable is followed by a stressed syllable., Hence, a speaker finds it very easy to utter the sentence in such a manner that the stressed, syllables ought, know, way, use, pen (S1), wish, and could (S2) occur at regular intervals of time., The third sentence has eight syllables, three of which are stressed. There is only one unstressed, syllable between the first two stressed syllables, three unstressed syllables between the second, and third stressed syllables, and one unstressed syllable at the end of the sentence. Similarly, the, fourth sentence has nine syllables, three of which are stressed. There are six unstressed syllables,, with only one unstressed syllable between the two stressed syllables—the first two and also, the next two stressed syllables. There are two unstressed syllables at the beginning as well as at, the end of the sentence. The time interval between what, m-, st- (S3), make, point, and te- (S4), will be approximately the same in spite of the variation in the number of unstressed syllables, between the stressed ones., The above examples (1–4) explain the importance of stressed and unstressed syllables in, creating characteristic rhythm in a sentence. Unstressed syllables are generally crowded together, and pronounced rapidly whereas stressed syllables are pronounced more clearly. Thus, accented/, stressed syllables with no stressed syllables in between them are prolonged. The speed of delivery,, therefore, depends on the number of unstressed syllables between the two stressed ones., Refer to the Students’ Resource to understand the strong and weak forms of English words., , INTONATION, The intonation of a language refers to the patterns of pitch variation or the tones it uses in its, utterances. In normal speech, the pitch of our voice goes on changing constantly—going up,, going down, and sometimes remaining steady. Different pitches of the voice combine to form, patterns of pitch variation or tones, which together constitute intonation., Intonation is closely linked to stress because important changes in pitch occur with stressed, syllables. These changes generally take place on the last stressed syllable in an utterance, and, hence this syllable is called the nucleus. The following are the main functions of intonation:, https://abdullahsurati.github.io/bscit, , 85
Page 93 :
86, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Distinguishing different types of utterances such as statements, commands, requests,, and questions, • Differentiating the speaker’s emotional attitude such as curiosity, apprehension,, friendliness, and politeness, • Drawing the listeners’ attention to those segments of an utterance that one considers, important, A segment of speech carrying one intonation pattern is called a tone. Sequences of English, speech fall into two well-defined tones or intonation patterns:, 1. Falling tone (tone I) , 2. Rising tone (tone II), A tone group may, thus, consist of one or more syllables. A short, utterance, quite often forms a single tone group, while a longer one is made, A stretch of speech over, up, of, two, or more. While speaking, we divide long utterances into small, which one pattern of pitch, variations, or contour of, and manageable groups of words, between which we pause. Hence, a tone, pitch, extends is called a, group may also be defined as a stretch of speech between two pauses. A, tone group., few examples are given below to show the concept of tone groups wherein, the tone group boundary is indicated by an oblique ( / ) sign:, 1., 2., 3., 4., 5., 6., 7., 8., 9., , Yes., She will meet you tomorrow., Why do not you help me?, I am not afraid of them., The door has been opened., I want to complete this work/before my teacher comes., Please do it now/if you have the resources., We can go for a picnic/if we receive permission from them., Do you know/that they are planning to put up a show/for collecting funds for Tsunami, victims?, 10. You have plenty of time, but we do not, despite the three forthcoming holidays., , General Uses of Tone I and Tone II, Falling tone (tone I), In utterances with falling tone, the pitch falls from high to low. The falling tone (which is, marked by [`]) usually occurs in the following types of sentences:, (i) Statements that are complete and definite, , Examples:, I am well aware of my limi`tations., They might have already `left., I 'cannot a'fford to `do it., , I 'go for a 'walk `daily., You must 'know 'how to `do it., , (ii) Question-word questions that are matters of fact and are intended to be neither polite, nor impolite, , Examples:, When are you `leaving?, How long will it take you to come `here?, Who is knocking at the `door?, , Where do you come `from?, Why does he want to leave the ‘company?, , https://abdullahsurati.github.io/bscit
Page 94 :
https://abdullahsurati.github.io/bscit, , EFFECTIVE SPEAKING, , (iii) Commands, , Examples:, , Open the `door., Give me that `pen., ‘Tell him to be`have., , 'Look 'up the `dictionary., 'Turn to page `forty., , (iv) Choice questions, , Examples:, , Will you agree or `disagree?, Is he reading or `sleeping?, Do you want tea or `coffee?, , (v) Exclamations, , Examples:, , `Fantastic!, What fine `weather!, By `Jove!, , Would you like to see him today or `tomorrow?, Has she accepted or `rejected?, , How `beautiful!, `Bravo!, , (vi) Tag questions with a negative tag, , Examples:, , You agree to this, `don’t you?, He can help you, `can’t he?, They should come forward, `shouldn’t they?, , We have faced it several times, `haven’t we?, She has worked hard, `hasn’t she?, , Rising tone (tone II), In utterances with rising tone the pitch rises from low to high. The rising tone, marked by [,],, generally occurs in the following types of sentences:, (i) Yes/No type question, , Examples:, Do you ‘agree?, Was he ill ′yesterday?, Did they explain the reasons?, , (ii) Statements intended to be a question, , Examples:, You will not ′do that?, He does not have ′money?, They are not going?, , Shall we go ′now?, Have they ′finished?, , You do not want to lend me ′your book?, She cannot hear ′you?, , (iii) Non-terminal tone group (the first group is spoken with a rising tone while the second, with a falling tone), , Examples:, Unless you decide to ′succeed … (you may, not succeed), While going ′home … (I would return this box), If you do not turn up ′tomorrow … (I’ll send, you out), , Before leaving for ′vacation … (I must complete, this job), Since this ′morning … (he has not reported), , (iv) Polite requests/commands intended to sound like a request, https://abdullahsurati.github.io/bscit, , 87
Page 95 :
88, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , , Examples:, , Get me that pen ′please., Listen to me for a ′minute., Buy me a ticket, ′please., , Call him ′in., Do not mention it to ′him., , She is not honest, ′is she?, They are not coming today, ′are they?, We should not let them go, ′should we?, , He cannot complete the project, ′can he?, It was not enough for you, was it?, , (v) Tag questions with a positive tag, , Examples:, , Falling-rising tone, Besides using the falling tone and the rising tone discussed above, we can also use the combination, of tones, namely the falling-rising tone and the rising-falling tone for our utterances in English., In utterances with falling-rising tone, the pitch falls from high to low and then rises again to, high. On the contrary, in utterances with rising-falling tone, the pitch rises from low to high, and then falls again to low. These are detailed as follows., The falling-rising tone [marked as (∨)] may be used in expressing special implications not, verbally expressed (apology, happiness, doubt, insinuation, indirect insult, etc.) and in incomplete, statements leading to one of the following tone groups:, Do you watch movies? ∨Sometimes. (Not frequently), I `met her at the ∨club. (I expected her somewhere else), Is he at home? ∨Now? (Doubtful), `She cannot? (I’m almost sure she can), He ∨can? (I am almost sure he cannot), I am glad to see you doing ∨well. (Encouraging, sympathetic), `When will you ,bring me some more books? (A polite rise on bring and a mild insistence on when), Mind your ∨language. (Strong but sympathetic warning), When I come to know of it, /(I will inform you). (Incomplete utterance), If you do not behave, /(I will punish you severely). (Incomplete utterance), , The rising-falling tone is generally used to reinforce the meaning expressed by the following, falling tone. The initial rising tone may also exhibit warmth, friendliness, anger, or sarcasm., Do you believe it? Yes. (Enthusiastic agreement), Of course. (Enthusiastic agreement), It was awful. (Enthusiastic agreement), But is her child so naughty? (Suspicious interest), Are you sure he can play? (Suspicious, mocking), How wonderful. (Sarcastic), Oh, really. (Sarcasm), Go and break your head. (Haughty), Come and face the challenge. (Irritable), , Table C5.3 in the CD provides a complete list of phonetic symbols and signs used in English., Table C5.4 lists the variations in the sounds of Indian, American, and British English., https://abdullahsurati.github.io/bscit
Page 96 :
https://abdullahsurati.github.io/bscit, , EFFECTIVE SPEAKING, , ACHIEVING CONFIDENCE, CLARITY, AND FLUENCY, To grow in our academic or professional career, we must have the ability to stand in front of an, audience and deliver a lecture or presentation on a certain topic. It should be convincing, supported, with facts and examples, and be able to create an impact. We may have brilliant ideas, but it is very, important to get them across to others for them to be appreciated. Similarly, in our personal or, community life, we may have to meet people, talk to them about some matter, or persuade them to, do something. We may have to speak in various situations, be it with colleagues at the workplace,, friends and teachers in college, or others in our neighbourhood. The effectiveness with which, we do it shapes the perception of us in others’ minds. You probably remember times when you, persuaded your parents to agree to something, given a motivational talk to your siblings or friends,, or informed your teacher about something. On the other hand, you might have failed in convincing, or persuading others at some other occasions. Thus, different experiences might have made you, realize that being confident, clear, and fluent is the key to effective oral communication. Let us, discuss how we can enhance our confidence, clarity, and fluency in speeches and presentations., , Confidence, Most people tend to become anxious or nervous before doing something important in public., For instance, athletes are nervous before a big game, politicians are nervous to stand in front of, a huge gathering during their election campaign, and actors are nervous to face the camera and, deliver dialogues. However, we must know that only those people who know how to transform, their nervousness into excitement or enthusiasm become successful. The same approach is true, for successful speakers. Some speakers may even feel that they would perform well only if they, become nervous before a speech and that they would fail if they are cool and self-assured., Hence, becoming nervous before a speech or presentation is natural, normal, and sometimes, even desirable. However, we should know how to overcome this nervousness or stage fright so, that we not only feel confident but also appear so in front of our audience. The following are a, few tips to overcome nervousness before a speech:, • Believe that fear is your friend; it makes your reflexes sharper, heightens your energy as, more adrenaline is pumped into your blood when you are nervous or stressed., • Given a choice, choose a topic you truly like. If you are given a specific topic, develop, genuine interest in it., • Prepare, prepare, and prepare until you become comfortable with delivering the topic., Thorough preparation is the antidote for nervousness., • If you are a novice speaker, then prepare more than the required material so that you do, not go blank during your speech on any main or subtopics., • Give a mock speech in front of your friends and find out your strengths and weaknesses., • Try the positive visualization technique that requires you to concentrate on how good, you are and to think all is well. You should practice this a day or a few hours before your, speech: assume that you are just chatting with your friends; close your eyes and imagine, that your audience is intently listening to you, smiling, and applauding; at the end of, your speech, many people come to you, shake hands, and appreciate your speech; and, then you enjoy your favourite food with your family and friends in a nice restaurant., • Anticipate easy and difficult questions and prepare answers for the same., • Work hard on your introduction material. Practise till it is smooth. Generally the, speaker’s anxiety level begins to drop significantly after the first thirty seconds. Hence,, once you are through with the initial part of your introduction you may feel better., https://abdullahsurati.github.io/bscit, , 89
Page 97 :
90, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Take a couple of slow, deep breaths before you start your speech., • Do not start immediately after reaching the stage. Take a few seconds to look into the, eyes of your audience., • Check the venue and other arrangements. For instance, if the mike or projector does not, work, your nervousness may get aggravated. Hence, it is better to check the equipment., • While waiting for the audience you can take a quick walk in the room., • Look at the friendliest faces in the audience., • Do not explicitly show your nervousness; if your hands are trembling keep them close to, your body. If your legs are shaking, lean on the lectern or table on the stage., • Do not comment on your nervousness., • Remember that nervousness does not show even one-tenth as much as it feels., • If your speech is being recorded, forget that you are standing in front of a camera. Speak, only to your audience and not to the camera., , Clarity, Listeners, unlike readers, cannot look up a dictionary or re-read the words to comprehend the, meaning of the words they listen to. A speaker’s meaning must be immediately understandable;, it must be so clear that there is practically no chance of misunderstanding. Many speakers, despite having a complete control of what they were speaking find it very difficult to speak, clearly. Even if they spend hours in preparing for their speeches or presentations and deliver, it confidently, an audience may not understand most part of the speech if there is no clarity in, their speech. A speech may lack clarity, if the speaker:, •, •, •, •, •, •, , Speaks either very fast or very slow, Does not articulate the words properly, Pronounces incorrectly or does not follow the standard pronunciation, Gives wrong emphasis on words, Does not have a well-organized material, Uses too many unfamiliar words, , The following are some of the ways in which the clarity of speech can be improved:, • The average number of words can be spoken per minute is about 120–140. Inexperienced, speakers generally tend to speak faster because of their nervous energy. Hence, a conscious, effort to slow down can reduce the speed significantly. Likewise, if the speed is very slow,, an effort to speed up should be made. However, in both the cases the speaker should, always look natural., • The following exercises that involve speech organs such as jaw, tongue, etc., should be, practised:, (a) Open your mouth wide and then close. Repeat it several times., (b) Touch the inner parts of your mouth with your tongue or rotate your tongue, thereby, touching all parts of your mouth., (c) Make wide chewing motion while humming gently., (d) Stretch your jaw muscles (as though yawning) while moving your jaw sideways and, in circles., (e) Puff air into your mouth, keep for a few seconds, and then release it. Repeat it, several times., • One should learn the correct pronunciation of words while preparing for a speech. The, preceding chapter on Phonetics would facilitate in this process. Listening to English, https://abdullahsurati.github.io/bscit
Page 98 :
https://abdullahsurati.github.io/bscit, , •, •, , •, , •, , •, , EFFECTIVE SPEAKING, , news in television channels may also help as the news readers speak Standard English., One can also seek the help of friends who speak good English., While speaking, the volume should be adjusted keeping in mind the number of audience,, the size of the room, etc. If using a mike, one needs to adjust the volume before one, begins the speech or presentation and has to get it checked thoroughly., All the words in each sentence of one’s speech is not equally important. Take for example, a statement ‘We all want the best solution’. As a speaker, one should know which word, should be stressed—all, best, or solution. One’s misplacing of emphasis may make the, audience confused. Hence, while rehearsing, it is always better to highlight the words, that are to be emphasized and to speak them with the right accent. One should believe, in the saying ‘Practice makes one perfect’., Whether be it a discussion with one’s professors, a conversation with an official, or a, speech to a group of audience, one needs to think and organize the contents of the, message before speaking. Assume that you wish to enquire the Passport officer about, the status of your passport. If you ask him or her ‘What happened to my Passport?’, and, then provide the details about application number, date, etc., chances are that you may, not get the desired response. On the other hand, if you provide a context and then ask, your query, the officer may understand and respond. Similarly, in a speech one needs to, give a preview to the topic, discuss all the points in a logical manner, and then give the, highlights of the discussion at the end. Otherwise, the speech will lack clarity., Simple and unambiguous words and expressions should be used in a speech. One should, always avoid too many technical terms, acronyms, complicated words and phrases that the, audience may not be familiar with. Rather than impressing the audience it may just end up, putting them off. Knowing whom one is addressing is as important as what one is going to, speak. If one really has to use technical terms, then those should be explained to the audience., Recording one’s presentations may help know how one sounds and where the problems, lie. A video recording would be an even better idea. One may request some friends, to take a look at the recordings and provide a frank assessment of the clarity of the, presentation. Then, based on the feedback and on one’s observations, one can work on, improving the clarity of the speech., , Fluency, We can ask these following questions to ourselves and try to answer them:, , • Do I say ‘umm…’ ‘ah…’ because I do not get the right words to continue my statements?, • Do I pause a lot when I speak?, • Do I use certain expressions such as ‘you know’, ‘I mean’, ‘actually’, etc., during my, speaking assignments?, • Do I speak very slowly and carefully because I feel that I may commit mistakes?, • Do I mumble some words because I am not very sure about my pronunciation?, • Do I feel irritated when a member of the audience interrupts me during my speech?, , If the answer is ‘yes’, then we have a problem in speaking English fluently. Fluency is nothing, but delivering continuous flow of message at an appropriate rate with necessary pauses. The fluency, in speaking English depends mostly on our proficiency in English. We must realize that gaining, good command over a language will pave the way for fluency, which in turn may enable us to face, the audience confidently. The following guidelines may help enhance our fluency in English:, • Aim for clear oral communication devoid of speech errors., https://abdullahsurati.github.io/bscit, , 91
Page 99 :
92, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Write personal diary in English., • Listen to good speakers and read material written in good English. Listen to news, in English. Watch English documentaries. Read the newspaper both for content and, language. Read fiction/non-fiction to understand the use of figures of speech such as, metaphor, simile, alliteration, etc., • Expand vocabulary by learning at least five words per day, along with their meanings and, usages. Refer to Chapter 17 for some guidelines on how to improve vocabulary., • Practise correct pronunciation, accent, and tone to make the speech impressive. The CD, provides some pronunciation practice., • Learn from your mistakes. For instance, during your initial attempts on speaking, you, may go wrong in grammar or vocabulary but make sincere efforts to correct them in the, subsequent attempts., • Concentrate on your ideas rather than your appearance, the impact you are creating, etc., • Read aloud the passages from books or magazines that you enjoy reading., • Watch English movies to understand the manner of speaking conversational English., • Think in English what you have done or what you are going to do., • Practise your speaking skills in small talks—on weather, game, hobbies, current affairs,, etc.—with your friends or family members. Ask them to correct you if you make some, mistakes in grammar, vocabulary, or the use of appropriate pauses., • Believe in what you’re speaking., • Spare at least an hour every day for developing your English fluency., , To enhance fluency, one needs to keep speaking English and continue to learn from, one’s mistakes., , VOCAL CUES, Vocal cues help us to give urgency to our voice and are an important aspect of effective speaking., Our voice is our trademark; it is that part of us that adds human touch to words. Writing does, not have that immediacy because the words are static on a page. Voice gives extra life to our, delivery. Therefore, it is useful to understand the characteristic nuances of voice, namely quality,, volume, rate, pitch, articulation, pronunciation, and pauses., , Quality, Quality is a characteristic that distinguishes one voice from another. Each one of us has a, unique voice and its quality depends on its resonating mechanism. While the quality of one’s, , Projection, Loudness and projection are two different aspects, of our voices. It is possible to project our voice, without being loud. Stage actors often do this when, they speak in a low voice, and yet are heard from, the back rows of a theatre. If we begin speaking, in a loud voice, we will get the full attention of the, audience. Then shifting to a lower, softer voice when, appropriate will still hold that attention. Generally,, , we need to use a louder voice at the beginning of, our talk and at the start of each new section., To make our voice travel through the room,, we need to breathe deeply as we need air in our, lungs to project. Often, speakers run out of air and, let their voices fade just when they are delivering, critical information. At the end of a section, our, voice need not be loud, but it must project., , https://abdullahsurati.github.io/bscit
Page 100 :
https://abdullahsurati.github.io/bscit, , EFFECTIVE SPEAKING, , voice cannot be changed, it can be trained for optimum impact. It may be rich and resonant,, soft and alluring, thin and nasal, hoarse and husky, or harsh and irritating. Very few people, are naturally blessed with deep and resonant quality; everybody can improve on the quality, of the voice and develop it to its fullest potential. Abraham Lincoln and Winston Churchill,, for example, adapted the quality of their voices to become speakers par excellence., , Volume, Volume is the loudness or the softness of the voice. Our voice should always project but need, not always be loud. If the place we are speaking in is large and open, the volume should be high,, and if the place is small and enclosed, the volume should be low. If our volume is too high we, may sound boorish and insensitive, whereas if it is too low we may convey an impression of, timidity, which has no place in the business world. It may also give the impression that we are, not well prepared and lack the confidence to express ourselves. Thus, we should vary our volume, so as to make our voice audible and clear., One way to improve our voice and speaking style is through reading aloud. Reading children’s, stories, giving each character a unique way of speaking, may develop vocal variety. Reciting tongue, twisters, such as she sells sea shells on the seashore, may also help improve diction., , Pace/Rate, Rate is the number of words that one speaks per minute. It varies from person to person and, from 80 to 250 words per minute. The normal rate is from 120 to 150 words per minute. We, should cultivate our pace so as to fit in this reasonable limit. If a person speaks too slowly and, monotonously, he/she is most likely to be considered a dull speaker even though the contents of, the speech may be highly interesting. Similarly, a fast speaker also causes discomfort because the, listeners do not get enough time to grasp the thoughts and switch from one thought to another., Under these circumstances, listeners may just stop listening and their attention may go astray., It is best, therefore, to vary the speaking pace. Appropriate pauses should be used to create, emphasis. A well-paced, varied message suggests enthusiasm, self-assurance, and awareness, of audience., , Pitch, Pitch refers to the number of vibrations of our voice per second. The rise and fall of the voice, conveys various emotions. ‘Thank you’ is such a phrase. We can make out the difference when it, is uttered indifferently and when with sincerity. Inflections, give warmth, lustre, vitality, and exuberance to our speech., Lowness of pitch can indicate sadness, shock, dullness,, guilt, etc. When we are excited, joyous, triumphant, and, !!!, even angry, our pitch automatically becomes high. A, well-balanced pitch results in a clear and effective tone., It helps us avoid being monotonous. Intonation refers to, the rising and falling pitch of the voice when somebody, says a word or a syllable. By learning and adopting an, appropriate intonation pattern, we will be able to express, our intention very clearly., Pitch is also influenced by the air supply in our body;, if we run out of air, we cannot control the pitch of our, ‘Hi dude, whaddaya gonna do today?’, https://abdullahsurati.github.io/bscit, , 93
Page 101 :
94, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , voice. Like the strings of a guitar, if we tense the vocal chords, a higher pitch results, and vice, versa. Tilting our chin up or down reduces our ability to control pitch., A variety of pitches should be used to hold the listeners’ attention. We should always avoid, raising the pitch of our voice as we end a sentence. This vocal pattern, called pitching up, makes, our remarks sound tentative or unfinished., , Articulation, Speakers should be careful not to slop, slur, chop, truncate, or omit sounds between words, or sentences. If all the sounds are not uttered properly, the flow of understanding gets, interrupted and deters the listener from grasping the meaning of the message. The result, is similar to the negative impression that written errors leave with a, reader. Lazy articulation, slurred sounds, or skipping over words will, ‘Speak clearly, if you speak, lower the credibility of the speaker. Develop in yourself the ability, at all; carve every word, before you let it fall.’, to speak distinctly; produce the sounds in a crisp and lucid manner, –Oliver Wendell Holmes, without causing any confusion. The audience will better understand ‘I, do not know’ and ‘I want to go’ than ‘I dunno’ and ‘I wanna go’., , Pronunciation, Pronunciation requires us to speak out sounds in way that is generally accepted. The best way is, to follow British Received Pronunciation. Received Pronunciation RP, also called the Queen’s, (or King’s) English, Oxford English, or BBC English, is the accent of Standard English in, England., One should be careful enough to pronounce individual sounds along with word stress, according to the set norms. Do not be taken in by the fancy that you know the correct, pronunciation of all the words. Whenever there is confusion, always consult a good dictionary, and try to pronounce it accordingly. Given below are a few commonly mispronounced words, along with their correct pronunciations:, Word, arctic, gesture, 3 tier, Gigantic, , Common error, a:tik, , Correct pronunciation, a:ktik, , gestʃə(r), , dʒestʃə(r), , qrɪ:taɪə(r), , qrɪ:tɪə(r), , dʒaɪdʒæntɪk, , dʒaɪgæntɪk, , Voice Modulation, While intonation refers to the tonal variations, modulation pertains to the way we regulate,, vary, or adjust the tone, pitch, and volume of the sound or speaking voice. Modulation of voice, brings flexibility and vitality to our voice, and we can express emotions, sentiments such as, impatience, careful planning, despondency, suspicion, etc., in the best possible way. If we do not, , Practice 7, Try the pronunciation exercises given in the CD., https://abdullahsurati.github.io/bscit
Page 102 :
https://abdullahsurati.github.io/bscit, , EFFECTIVE SPEAKING, , pay special attention to the modulation of our voice, then our voice becomes flat and we emerge, as a languid speaker with no command over our voice. Word stress and sentence stress also play, an important role in voice modulation. For example, by accentuating one or two words in a, sentence (e.g., in the sentence ‘This company produces fifty cars everyday’, one can stress ‘this’ and, ‘fifty cars’), we can effectively bring in modulation in our voice. Thus, a novice speaker should, better underline the words that he/she may like to stress during the presentation. This helps one, avoid sounding dull and monotonous., , Pauses, A pause is a short silence flanked by words. A pause in speaking helps the listener reflect on, the message and digest it accordingly. It also helps the speaker glide from one thought to, another. It embellishes the speech as it is a natural process to give a break. However, it should, be spontaneous. Being too self-conscious may make the process look artificial., Vocalized pauses or vocal segregates such as uh, ah, hm, ahem, a, aah should be substituted by, silent pauses. Vocalized pauses make the speech sound evasive and untruthful; they dilute the, conviction of the message. Moreover, using repetitive phrases, ‘Better to remain silent, such as ‘I mean’, ‘well’, ‘like’, ‘ok’, ‘got it’, ‘actually’, etc., may sweep, and be thought a fool than, away the good impression we have created. Thoughtful use, to speak and remove all, of pauses at definite intervals exhibits assurance, confidence,, doubt.’, and self-control. Pauses should be used at the end of certain, –Abraham Lincoln, thought units to let the audience fully absorb the information., , Practice 8, Audio Clip Group 5: Listen carefully to the following sentences in the CD and practise speaking them, in the same way., 1. I enjoy seeing a project through to completion., 2. In the end, we managed to improve the efficiency of the engine., 3. If the polar ice caps melt, sea levels would rise and low-lying areas of the world would be, flooded., 4. Aviation engineering is concerned with the design and production of aircraft., 5. Increasingly, glass fibre is being used for long-distance telephone links., 6. We arrived early at the rendezvous., 7. The industrial revolution marked a new epoch in the history of mankind., 8. I met a singer near the monument this morning and he sang a song for me., 9. It was a pleasure to work with Mohan to work in this garage., 10. Engineers need to continue their education throughout their careers., Audio Clip Group 6: Listen carefully to the following short passages in the CD and practise speaking, them in the same way, with the correct paralinguistic features., 1. Silence is solitude; it is comp any. We find books in running brooks and sermons in stones., Silence is the caravan of ideas. The quiet aspects of nature are not silent in the real sense, but, they have an association of ideas., 2. A gentleman is an ornament, a delight of society. He is always conscious of his social, responsibilities. He harbours malice towards none and does not allow winged jealousies to, hover over his head. His thoughts are limpid like crystal, his judgements balanced and free, from prejudices., https://abdullahsurati.github.io/bscit, , 95
Page 103 :
96, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , 3. I enjoy living downtown. Of course, it is very noisy; the traffic is loud, and the young people, often shout when they come out of the clubs. But there are lots of good points too. There is a, wide range of shops and it is easy to get around., 4. There was nothing else to do, so he leaned back in the chair and went to sleep. When he woke, up, he noticed that the others had also gone off to sleep. He turned to the window and looked, out. The sky was clear now and in the afternoon light he saw a sight whose beauty left him, breathless., , Tips for Effective Communication, • Create an open communication environment., • Always keep the receiver in mind., • Do not communicate when you are emotionally, disturbed., • Be aware of diversity in culture, language, etc., , • Use appropriate non-verbal cues., • Speak with confidence, clarity and fluency., • Focus on vocal cues like volume, pitch, rate, etc., to enhance the effectiveness of speaking., , SUMMARY, Effective speaking is an important requirement, not only in our academic and professional career,, but also in our personal life. To develop oral, communication skills, it is required to understand the, sound system of English, including various aspects, such as individual sounds—consonants and vowels,, production of speech, word stress, and sentence, stress—and intonation or the variation of pitch. It is, also very useful to understand and practise the rules, , of pronunciation, to improve the way we articulate, speech. One should also be aware of the common, problem sounds, and practise to eliminate these., Confidence, clarity, and fluency are also considered to be vital for the effectiveness in our speaking., The vocal cues, such as our voice quality, pitch, rate, and volume, pauses, modulation, etc., play a key role, in creating a desired impact in speaking., , EXERCISES, Part A, 1. What is a phoneme? Classify the basic sounds of, English., 2. How is the production of vowel sounds different, from that of consonant sounds? How many distinct vowel and consonant sounds does English, have?, 3. Give examples of words with pronunciations that, use the following sounds:, (a) /i/, (b) /a:/, (c) /au/, (d) /^/, , 4. List the rules of pronunciation., 5. What is meant by accent?, 6. What is intonation? What are the general uses of, tones I and II?, 7. ‘Human voice is an extremely valuable resource, and contributes significantly to the effectiveness, of speaking.’ Discuss this statement in about 500, words., 8. Define each of the following terms and bring out, the difference between them: Articulation and, Pronunciation, , https://abdullahsurati.github.io/bscit
Page 104 :
https://abdullahsurati.github.io/bscit, , Part B, 1. Make ten words each with the sounds mentioned, in the columns of the table given below., , Words, Words, with /ə/ with, /ð/, , Words, Words, with /aɪ/ with /, dʒ/, , Words, with /ɑ:/, , 2. Add the consonant sound to the word to make, another word:, Example: /k/ + aim = came, (a) /s/+ eyes =, (b) /l/ + eight=, (c) /w/ + ate=, (d) /b/ + air=, (e) /b/+ache=, (f) /p/ + oust =, (g) /t/ + rue =, (h) /r/ + owes=, (i) /∫/ + eat =, (j) /t∫/ + it =, 3. Read the following conversation that has six questions asked by X. Write F if they are spoken with a, falling tone and R if they are spoken with a rising, tone:, Example: Are you a student?, X: What is your name?, Y: Sheela, X: Where do you come from?, Y: Margao, X: Is that in Goa?, Y: Yes, that’s right., X: How long have you been here?, Y: For almost 10 years., X: I see. Are you a teacher?, Y: No, I am an artist., X: And do you like the place?, Y: Yes, very much., , EFFECTIVE SPEAKING, , 4. Transcribe the following twenty words phonetically using IPA symbols:, Houses, office, abyss, India, obscure, thereafter,, era, oodles, conquer, thatched, women, manipulate, voice, caught, virtue, daunt, endorse, music,, garage, pleasure, 5. Write the following twenty words in ordinary orthography:, /t∫ɔ:k/, /∂uq/, /ðen/, /lu:dikr∂s/, kreviŋ/, /kɔstik/,, /mɔð∂/, blænd/, /lisn/, /d3u∂ri/, /ɔsti∂/, /rek/, /, welfe∂/, /indɔ:s/, /iksentrik/, /∂ust/, /ɔ∂:st/, /, hi∂riɔ/, /∫u:/, /ju:n∂v∂:s∂ti/, 6. (a) Mark the primary stress in the following words:, Tunnel, deafening, teacher, yesterday, physio, logy, examination, interview, laboratory,, economic, effectively., (b) Underline the word or words you would like, to give emphasis in the following sentences:, (i) He’s a charming fellow., (ii) He wasn’t by himself when I saw him., (iii) Give yourselves plenty of time., (iv) You won’t hurt me, you’ll only hurt yourself., 7. Underline the word or words you would like to, give emphasis in the following sentences:, (a) You must be back in time, (b) I have been working all day., (c) He that is content is rich., (d) I enjoyed the trip very much., (e) Your shoes need polishing., (f) Her acting was excellent., (g) The play attracted a huge crowd., (h) This year the conference was held in Bengaluru, for two days., (i) Yesterday, he came at 10 O’clock to the office., (j) At times, he will see even two or three movies, in a day., , https://abdullahsurati.github.io/bscit, , 97
Page 105 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 6, , OBJECTIVES, You should study the, chapter to know:, , • how to apply both listening, , and speaking skills, simultaneously in various, contexts of communication, • how to make an effective, face-to-face or telephonic, conversation, • the essentials of a, conversation such as, beginning, ending,, expressing opinions,, paraphrasing, reflecting, others’ feelings, and, involving everybody, • how to listen, reflect, and, speak while communicating, with others, • how to write situational, dialogues, , Conversations and Dialogues, , INTRODUCTION, Sender and receiver are the two most important components of, communication—the sender writes and the receiver reads. Similarly,, when the sender speaks, the receiver listens. Thus, speaking and, listening activities complement each other. In many situations in our, personal, academic, or professional life, we may have to speak in front, of our friends and colleagues or listen to them. But how effectively, we perform depends on our conversational ability. That is, our ability, to listen effectively, process the information, consider the reaction, expected of us as well as our expectation of the conversation, and, respond appropriately. The audience’s views, reactions, and responses, may either encourage or discourage us, but it is important to remember, that much of this reaction is a result of how we handled the situation,, when it was our turn to listen or speak. For instance, as a listener, one, needs to understand and respond to the speaker to engage his/her, interests in the conversation. This would definitely help the speaker feel, comfortable and encouraged, and thus respond positively., Although in face-to-face conversations we can use our body, language more effectively than in telephonic conversations, the same, basic strategies for effectiveness apply, for both the types. How we begin our, ‘You are awake 16 hours, a day—5840 hours a, conversation, how we listen to other, year. You spend more, participants in the conversation, how we, time contacting other, carry on further, and how we finish our, people than in any other, conversation—all are important facets, single activity. How well, involving our speaking and listening, you converse with these, people is the magic key, skills. Now that we have understood, to whether your days, the basics of listening and speaking, will be pay-off days filled, individually, in this chapter, we will learn, with personal and social, how these two activities are combined, popularity.’, in various forms of communication. To, –James A. Morris, start with, the following section will, https://abdullahsurati.github.io/bscit
Page 106 :
https://abdullahsurati.github.io/bscit, , CONVERSATIONS AND DIALOGUES, , enable us to understand the term ‘conversation’, its different types, and the techniques for, effective conversations—both face-to-face and telephonic., , , , CONVERSATIONS, Let us begin with an example. It is break time at a conference. You spot some participants with, whom you would like to build a relationship. If you let them talk about themselves in detail, while responding only with ‘uh-huhs’ and some occasional questions, you may come across to, that person as being reserved. The best conversations are exchanges, not interrogations. Rule, of thumb for effective conversations: talk about yourself enough to not appear withholding, or reserved, listen carefully, ask questions, and make comments based on what the others are, saying. You must talk almost 25 to 50 per cent of the time to make the conversation lively., Conversation is a mental occupation and not merely converting casual thoughts into, words. Everybody talks in a friendly environment. But mere talking may not be considered, as a conversation. A person may talk for a long time without saying anything worthwhile, but, even then his/her talk would be an interesting one if others in the company draw pleasure in, listening to him/her. None of the professional talks, those of the teacher, the lawyer, the public, speaker, the actor, the debater, may be considered as conversations per se. An uninterrupted, talk, though being a good discourse, can never be considered as a good conversation. A good, conversationalist is neither one who monopolizes the conversation nor one who keeps silent all, the while. Conversation is an almost invisible art, efforts put into improving which are more, felt than seen., Everybody has the power of transmitting thoughts in some way. But an effective conversation, is a mutual process, where the thoughts are transmitted not in isolation but in reactions to those, that are received as well. Good conversational skills help us in both professional and social, conversations., , Types of Conversation, There are six types of conversation. These are, Chat The least formal of all conversations, e.g., two friends discussing about cricket and the, latest fashion, or two women talking about their husbands., Tête-à-tête French for head-to-head, meaning a confidential/private conversation., https://abdullahsurati.github.io/bscit, , 99
Page 107 :
100, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Dialogue Conversations in a book, play, or film. Also, a formal discussion between two groups, or countries, especially when they are trying to solve a problem, end a disagreement, etc., Parley A formal discussion between enemies regarding the terms of a truce., Colloquy The most formal of all conversations (a colloquy on nuclear disarmament); it can, also be used to ironically describe a guarded exchange (a brief colloquy with the arresting, officer)., Communion A form of conversation that may take place on such a profound level that no, words are necessary (communion with nature)., , Strategies for Effectiveness, Each type of conversation serves a specific, well-defined purpose. By following certain simple, strategies discussed below, we all can make our conversations more interesting, inspiring, and, influential., • Developing ideas adequately, • Listening intently, • Involving everyone in the group, • Arousing and sustaining interest, • Using appropriate language, • Starting and ending conversations, , We have already understood the importance of listening intently in Chapter 4, including, how one can encourage the speaker by clearly indicating one’s interest in what the speaker has, to say. In the following sections, we discuss the rest of the strategies listed here., , Starting and ending a conversation, While conversing with friends and acquaintances, we may not have any difficulty in starting, or ending the conversation as we share many common events or experiences with them., However, with a stranger or with somebody whom we do not know very well, we should, have some strategy to start and end our conversations. In such cases, an effective conversation, may play an important role in shaping our career or developing a long-lasting relationship., Following are a few openers and closers for conversations we can use depending on different, situations and topics., Conversation openers We can state a fact or ask a question to start a conversation. We, can also start with a smile and some greeting word. In general, we may start by referring to a, situation or to the person we are conversing with., Starters for conversations with known people, •, •, •, •, , How did you like yesterday’s programme?, I did not like today’s class on ‘circuits and signals’., Your shirt looks new. Is there anything special today?, Have you completed the assignments?, • The Mess food is getting better these days., • I like your earrings. Where did you get them?, ‘A conversation is a, • The Government should not have introduced this scheme., dialogue, not a monologue., That’s why there are so few, Starters for conversation with strangers, good conver-sations—due, • Hello James, how do you do?, to scarcity, two intelligent, • Hello Sir, welcome to our college!, talkers seldom meet.’, • Hi, Rohan, weather is very nice. Isn’t it?, –Truman Capote, • I am a second year student here. Are you a fresher?, https://abdullahsurati.github.io/bscit
Page 108 :
https://abdullahsurati.github.io/bscit, , CONVERSATIONS AND DIALOGUES, , 101, , • Hello Mr Gupta, I have heard a lot about you but meeting you for the first time., • Mr Mahesh, nice to meet you., • Good morning, I have been asked to appear for an interview at Sapient Corporation. Please guide me where I, should submit my records., , Conversation closers No matter how good and interesting our conversations are, we need, to close them at some point. Signals such as boredom, restlessness, silence, etc., often indicate, that our conversation should end. Moreover, if there is a time constraint, we have to end our, conversation on or before time. In any case, we should end it emphatically. For instance, in, an interview, you need to thank the panel at the end and tell them how you have enjoyed the, interview. Similarly, if you are speaking to your professor on a project, you need to end your, conversation by emphasizing what you have done so far and what would be your next step. The, following samples would be useful in ending a conversation effectively:, • May be we can get in touch by next week. Hope to see you again., • Thank you very much for this opportunity. It was great to attend this interview and I look forward to meeting, you again soon., • It has been nice speaking to you. Have a nice day/good night., • I have some more things to discuss but I would like to take leave now. I will get back to you later. Thank you., • I will not take any more time but it has been nice talking to you. Have a great evening., • So let me confirm that we would take care of your investment plans. Thank you very much and have a nice day., • It is my first visit to your organization and I would like to meet many others during my next visit. Thank you for, making my first visit memorable., • Ok, then I will email you the details you had asked for. See you soon., • John, thanks once gain for your advice., • Thank you Ma’am, I will certainly follow your guidelines and perform better next time. Have a nice day Ma’am!, , Involving everyone, Assume that you are conversing with two of your teammates on an important class assignment, on a team presentation:, You: Hello Mohan and Ramesh, I think we need to decide today on the topic for our presentation., Ramesh: Yes, we know. What we thought of was …., You: I think we can select ‘Controversies on Moon Landing’. It will be interesting for others and we have, adequate material., Mohan: We have another topic in mind. Shall I …, You: As I already told you, the topic I said will be liked by everybody and there should not be any problem in, presenting it., , In this conversation, you may realize that you have not involved your teammates in deciding, upon the topic for the presentation., A good conversationalist is not one who holds the listeners spellbound by his/her speech, but, one who involves everybody into the conversation. We should not forget about the others in the, group who may have something to contribute. Rather than individual contributions, participation, of the group as a whole is more important in a conversation. Involvement of everyone makes a, conversation more interesting, informative, resourceful, and effective., https://abdullahsurati.github.io/bscit
Page 109 :
102, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Hey, I met the last year s, president of students union., He talked and talked., , And, then he talked,, and talked some more., !!!, , Then?, , Arousing and sustaining interest, Conversations become successful only when all the participants have interest in the discussion, and participate in it. A conversation filled with questions, answers, views, expressions, statements,, and information always turns out to be an interesting one. Good ideas from the various, participants are often helpful to make the conversation interesting. Every participant may be, different from the others in terms of their response and behaviour. Hence, it is necessary to, arouse and sustain the interest of everybody while maintaining a balance among their different, interests., The following conversation will enable one to understand how one can arouse and sustain, interest in the conversation partner., You: Hey, what are you doing?, Counterpart: I am struggling to put up some web pages together., , You: What are they about? (You are encouraging your counterpart to share her problem.), Counterpart: Figures of speech in American English, similes, metaphors, oxymorons, idioms, etc., You: That sounds interesting! Could I have a look? (You are arousing her interest in speaking to you), Counterpart: By all means. In fact, I wanted you to go through these pages., You: Absolutely, just give me a few minutes, I will finish my coffee and be right back (You are sustaining, , her interest), , ‘Questioning is the mode, of conversation among, gentlemen.’, , –Samuel Johnson, , Counterpart: That is fine., …, You: I think you are doing a great job of it. The content will be quite helpful for people who, are trying to learn English, and also for those who want to add to their knowledge of the, language. (You are appreciating her), , Developing ideas adequately, Once we start the conversation and set the stage, we should have some strategies to develop our, ideas. The best strategy is to build a knowledge reservoir that never lets our conversation run, dry. Facts and information always make others enjoy the discussion. We can gather knowledge, from reading, listening, watching television, and observations and experience. We can draw, our examples from this gathered knowledge to make our conversations more meaningful and, convincing., https://abdullahsurati.github.io/bscit
Page 110 :
https://abdullahsurati.github.io/bscit, , CONVERSATIONS AND DIALOGUES, , 103, , Enjoy the following conversation between two friends on the T20 World Cup Cricket, Tournament held in West Indies. Both the girls add value to their conversation by bringing in, more matter from newspaper, TV, etc., Shilpa: Hi Preeti, I feel very low today because India is out of semi finals., Preeti: Yeah, me too. It is a shame on us., Shilpa: Did you read today’s newspaper? It says that Indian team played its match against West Indies very, casually and it lacked in all fronts—fielding, batting, bowling, and captaincy., Preeti: Yes, I know. I just watched the TV news channel. There are many controversies surrounding this match!, Shilpa: Like …?, Preeti: Like—the players did not have any rest after IPL T20, some of them were not fit to play, they were not, focused on the tournament because of the overnight parties, etc., Shilpa: It is indeed sad to watch our team perform badly., , Using appropriate language, This is the most difficult aspect of a conversation. We use language in conversations to convey, our ideas and feelings, to paraphrase the presented thoughts, to appreciate others, to reflect, implications and underlying feelings, and to invite further contributions. Given below are some, practical hints to accomplish these purposes., Practical hints Our body language is very important to reinforce whatever we are speaking, or listening to. For example, using gestures such as nodding our head while listening, or, uttering uh-huh, etc., adopting suitable postures, maintaining purposeful eye contact, and facial, expression would enhance the quality of our conversations. In addition, certain specific phrases, that can be used in certain situations during our conversations are as follows., Paraphrasing the presented thoughts or feelings, •, •, •, •, , What you are saying according to me is …, As far as I understand what you mean is that …, Do you mean to say that …, So your feeling is that …, , Making the others feel appreciated, , • Fantastic! How do you keep coming up with such good ideas?, • What a memory! Wish mine was as good …, • You learn fast! I wish I could too …, , Reflecting the implications (where the content is leading), , • So that might lead to a situation in which …, • Would that help with the problem of …, • I suppose if you did that, you would then be in a position to …, , Reflecting the underlying feelings, , • Had it happened to me I would have been rather upset., • That must have been rather satisfying., • I guess that must make you rather anxious., , Inviting further contributions, , • Could you tell me a bit more about that?, • How did you feel when you learnt that you were promoted?, • What happened then?, , Interrupting politely, , • Excuse me, sorry to interrupt, can I add something here?, https://abdullahsurati.github.io/bscit
Page 111 :
104, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Do you mind if I say something here?, • May I ask you something at this point?, , Useful phrases Given below are phrases and expressions that would be helpful in putting, forth preferences and opinions, offering explanations, and disagreeing with others’ views., Opinions, preferences, , I think …, In my opinion …, I would like to …, I would rather …, I would prefer …, The way I see it …, As far as I, am concerned …, If it were up to me …, I suppose …, I suspect that …, I am pretty sure that …, It is fairly certain, that …, I am convinced that …, I honestly feel that …, I strongly believe that …, Without a doubt …, , Disagreeing, , I do not think that …, Don’t you think it would be better …, I do not agree, I would prefer …, Should we not, consider …, But what about …, I am afraid I do not agree …, Frankly, I doubt if …, Let us face it, The truth of the, matter is …, The problem with your point of view is that …, , Giving reasons and offering explanations, , To start with, The reason why …, That is why …, For this reason …, That is the reason why …, Many people think, …, Considering …, Allowing for the fact that …, When you consider that …, , To sum up, conversing involves use of appropriate verbal cues besides other factors such as, active listening, involvement of every member, understanding of implications, use of non-verbal, cues, and so on. Choosing the right word at the right time to the right person is very important, for a conversation to be effective. For example, while talking about the latest features of a, database product to some database administrators, unnecessary superlatives should not be used, to describe the product as that may exert an adverse effect. On the other hand, while narrating, a sensational incident at a social gathering, one should try to re-create the scene by using, sensational words and expressions. We always need to remember that acquiring conversational, skill is the magic key to our professional success and our social popularity., ‘Conversation is an art, in which a man has all, mankind for competitors.’, , –Ralph Waldo Emerson, , convey the message:, , Conversation Practice, Now that you have learnt phonetics and strategies for effective, conversations, practise the following short conversations with one, of your friends or family members. Try your best to apply the rules, of pronunciation, accent, intonation, and use your voice effectively to, , In the class room, Good morning boys and girls. Let me talk to Sunil. Sunil, do you speak English at home?, Yes Ma’am, I speak English with my dad but I speak Hindi with my Mom., Do you have any difficulty in speaking English?, Yes, at times, in using the correct tenses., Do you need any help?, Yes, it would be nice if you can help me., , At the office during lunch break, What time do you get up every day?, At quarter to seven., https://abdullahsurati.github.io/bscit
Page 112 :
https://abdullahsurati.github.io/bscit, , CONVERSATIONS AND DIALOGUES, , 105, , Are you able to complete all your household chores before going for work?, Yes, but with a tight schedule., I know, it would be very hectic for you. When do you have your breakfast?, At around eight fifteen., , In the mall/at a restaurant / in the park, Do you like watching movies?, Yes, I do, but I do not find time to watch them in cinema hall. I watch them mostly on television., I see, do you watch with your family?, Yeah, mostly when they are telecast in the evening., That should be great experience, isn’t it?, Yes it is, we even have our snacks and dinner while watching the movie., Oh! I wish I had such an experience!, Have you ever visited Goa?, Yes, last December. In fact, we enjoyed Christmas in Goa., That should be a satisfying experience!, Exactly. It was wonderful to visit a number of churches and attend a party. What about you? Have you been to, Goa?, No, I yearn to. I have heard a lot about its beaches, people, art, etc., Why don’t you come with us this December when we go there?, Thanks. It is so nice of you to invite me. I will consult my family and let you know., That is fine. Bye., Bye!, , Outside the exam centre, Hi Reena, how are you and how was your exam today?, It was okay … but I could have done better., Never mind. You can do the remaining exams well. I know you are a good student., Thanks uncle, for your encouraging words., What are your vacation plans?, This year I have to do my summer internship at NELCO, Delhi., That would be an enriching experience. Right?, Yes, my friends who have done there earlier say so., I wish you good luck for your remaining exams and enjoy your internship., Thanks uncle, I have to catch 43C to reach Gandhi Circle. Bye., Bye bye., , Refer to the Students’ Resource for some more types of typical situational conversations., , TELEPHONIC CONVERSATIONS AND ETIQUETTE, Hello Mom, how are you?, I am fine, how are you? What’s up?, https://abdullahsurati.github.io/bscit
Page 113 :
106, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , Practice 1, Audio Clip Group 7: Listen to these six short conversations. Identify what sport or hobby is talked, about in the conversation and write the number of each conversation in the appropriate column. Also fill, in the other columns given below. One row has been filled as an example., Sl. No., , Sport/hobby, , (i), , Social work, , (ii), , Cricket, , (iii), , Reading, , (iv), , Fishing, , (v), , Water polo, , (vi), , Gardening, , Conversation No., , Clues, , Adjectives, , 1, , River, catch anything Relaxing, , Practice 2, Audio Clip 8: Look at this Claim Form for Lost Luggage to be completed. Make a note of the information, you need to look for in the conversation you are going to listen to. After listening to the conversation,, complete the form., Claim form for lost luggage, Name of passenger, Number of items lost, Type of items lost, Contact address, Phone number, Flight No. from Chennai, Flight No. from Hyderabad, Colour of the big suitcase, Date of flight, , :, :, :, :, :, :, :, :, :, , Mom, I want to go on a tour with my friends to Shimla. Can you transfer Rs 5000 to my account?, Yes dear, I will do that. Check at your account in the evening., Thanks Mom, bye., Take care., , Sitting anywhere in the world, we can share information, make requests, discuss business, matters, and be in touch with our family, friends, and colleagues over the phone. We can, get information about any place, product, or people across the globe on the Internet, and, for more information, we can directly contact the concerned organization over the phone, and speak to them. With the advancement in technology applicable to various domains,, such as education, industry, government, consumers, etc., the telephone—fixed line as, well as mobile connections—has become an essential means of communication in today’s, competitive world., https://abdullahsurati.github.io/bscit
Page 114 :
https://abdullahsurati.github.io/bscit, , CONVERSATIONS AND DIALOGUES, , 107, , In a telephonic conversation, the two, parties cannot see each other’s facial, expressions and other aspects of body, language. This makes it all the more, important for them to incorporate the, State, correct tone and articulation in their voices,, Capital?, so that the purpose of the phone call is, achieved successfully. For example, when, you are corresponding with a new client for, the first time, you need to create a desired, impression and give the client the correct, picture of your operations. If you are doing, this over telephone, your conduct assumes, huge importance. Therefore, although you, cannot see the caller in a telephonic conversation, you need to follow all the etiquettes that, you apply in a face-to-face conversation. Here are some etiquettes that you need to follow in, any kind of telephonic calls:, , ‘Hello when is, Rajdhani coming?’, , ‘Rajdhani wont’, move. It’ll stay, where it is.’, , • Use polite expressions such as ‘How can I help you?’, ‘May I speak to Mr …?’, ‘You, are welcome’, ‘Thank you very much’, ‘May I help you?’, ‘Could you please give me the, details of …?’, etc., • If you are the receiver, identify your name/your organization’s name as soon as you pick, up the call (e.g., Harish here/Sales Division, Monarch & Co.). Avoid saying ‘hello’., • Be clear and precise in your expressions and use pleasant tone of voice while speaking., • Do not shout., • Do not use slangs., • Do not interrupt the caller when he/she is speaking., • If you are transferring the call to somebody else, please ask the caller to hold on., • Listen to the caller patiently and get any unfamiliar terms clarified., • Before you call up anybody, think what and how to discuss so that you stay focused on, your objective., • Do not slam the equipment when the call is completed. Place it softly., • Do not eat or drink while speaking on the phone., • Do not talk to others around you while speaking on the phone., • Do not speak too quickly or too slowly. Use appropriate rate of your voice., • Reduce the background noise if any., • Pick up the phone as early as possible. Do not allow it to ring for a long time., • If you do not return the missed call, apologize/tell reason when the caller speaks to you, next time., • If the call is not meant for you, try to guide the caller for reaching the right person., • If you are the caller, ask the other person, ‘Is it good time to talk to you?/Can I speak to, you for five minutes?’, • Always keep a pen and note pad while taking calls., • Be enthusiastic and courteous., • Thank the caller before ending the call., https://abdullahsurati.github.io/bscit
Page 115 :
108, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Telephonic Conversation Practice, With the telephone etiquettes listed above in mind and the listening and speaking skills you, have acquired, practise the following telephonic conversation with your friend. You can practise, twice, assuming the role of caller and receiver alternately., , Telephonic conversation 1, Caller: Good morning. Can I speak to Mr Akash Gupta?, You: I am afraid he is not in. He will be in his office only in the afternoon., Caller: Could I leave a message for him, please?, You: By all means, can I take the message?, Caller: Yes, please. I am Iqbal Ahmed from Modern Corporation. Please tell Mr Gupta to be at our MD’s office, at 10 o’clock tomorrow morning to discuss the new contract. By the way, may I know who am I talking to?, You: I am Gopal, his personal assistant. I will pass on the message as soon as he comes in., Caller: Thank you., You: You are welcome., , Telephonic conversation 2, You: Good morning, Railway enquiry., Caller: Good morning. Could you tell me if the Madras Mail is late, please?, You: Yes, I am afraid it is running 40 minutes late at the moment., Caller: What time do you think it will arrive?, You: Around 11.15., Caller: Thank you., You: Welcome., , Practice 3, Audio Clip 9: Listen to this telephonic conversation and fill in the blanks of the following paragraph., ___________ is a student of _______________ at_____________ University in ____________. He, has applied for the ___________ programme at ____________University. He speaks to Professor, _______________regarding his _________________________ to the PhD programme. The, Professor is holding a project in ______________________________ and the student feels that his, ____________________________ match with the Professor’s project area. In fact, the student has, completed one ______________ during __________ year and is currently doing two ____________., The Professor has asked the student to send _____________________ of his project and the, ________ of the courses. The student has agreed to send the details to the Professor through two, email ids, namely ________________________ and ____________________., , DIALOGUE WRITING, A dialogue is a two-way conversation between people, thus involving effective listening as well as, speaking. Aimed at understanding and responding to the other person’s opinions on a particular, communication message, dialogues may involve opposing points of view. In several occasions, we may have to participate in or initiate such conversations and, hence, it is important to know, https://abdullahsurati.github.io/bscit
Page 116 :
https://abdullahsurati.github.io/bscit, , You never, say anything ..., , If only you, listened..., , CONVERSATIONS AND DIALOGUES, , 109, , how to construct appropriate dialogues. For, our dialogues to be effective, we must observe, how people talk to each other, what words or, phrases they use to provide information, how, they ask questions, and how they convince, others. Written dialogues always maintain a, narrative flow in a conversation if judiciously, used. The dialogues should be written in such, a way that the reader can discern the speaker’s, tone of voice and the state of mind., , Situational Dialogues, There are several occasions or situations, that require us to speak to another person, for getting or giving information, making, , Tips for Writing Dialogues, 1. Use quotation marks to show words spoken by, an individual., 2. Start a new paragraph when the speaker changes. It is not possible to have the same paragraph, for different speakers. However, several paragraphs can be used for the same speaker., 3. Ensure that the reader knows who is speaking., 4. Use punctuation, capitalization, and spacing, correctly., 5. Vary the use and placement of speech tags to, avoid monotony. Speech tags are used to con-, , vey many aspects. For instance, a dash (–) can, be used as a tag for conveying a pause in the, dialogue. Ellipses (…) can refer to stammering or, stuttering during a dialogue. We can also bring, in variety by using replied, remarked, suggested,, asked, etc., instead of using ‘said’ many times., 6. Use narrative sentences to show the character’s, concurrent acts, thoughts, and perceptions., , enquiries or a request, or getting something done. The dialogues spoken on such occasions are, called situational dialogues. The following are some examples of such situations., , At the tailor’s shop, A customer (Ram) meets his tailor to get his clothes stitched:, , ‘Good morning! I have got two shirts and a pair of trousers for stitching,’ said Ram entering the tailor’s shop., ‘Let me take the measurements...Sir,’ smiled the tailor., ‘No, no, it is not necessary. I have got the sample shirt and trousers,’ Ram handed over the samples in a hurry., ‘Oh, that is good. Let me see them.’ The tailor’s voice expressed relief from taking the measurements., ‘Do you want to have two pockets at the back of your trousers or only one as in this?’, ‘Please follow exactly the sample.’ Ram got annoyed., ‘Okay sir.’, ‘When can I get the shirts and trousers?’, ‘After a week, that is, on the 20th,’ he assured., https://abdullahsurati.github.io/bscit
Page 117 :
110, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , At the library desk, A student finds it difficult to locate a book in the library and at this time the librarian comes forward, to help her out., ‘Good morning, what can I do for you?’ asked the librarian with a smile to Leena who was struggling to locate, a book., ‘I need the book Organic Synthesis by Stuart Warren,’ uttered Leena without looking at the librarian., ‘Did you search through the online catalogue search?’ asked the librarian gently., ‘I did, but I could not succeed,’ answered Leena disappointedly., ‘Let me try,’ said the libararian starting the online search., ‘Do you need the details once again?’ asked Leena expressing concern., ‘If I am right it is a book on Organic Synthesis by …’ said the librarian still searching online., ‘Stuart Warren,’ completed Leena., ‘Here it is, the number is 201.15W,’ said the librarian triumphantly. ‘Please take this slip with you. It contains the, number.’, ‘Thank you very much for your help.’, , At the bank, A lady meets the manager in connection with understanding a scheme., , ‘Good morning sir, I am Swapna Sood from Goodwill Corporation,’ said the lady to the bank manager., ‘Good morning. What can I do for you?’ replied the manager., ‘I would like to understand the scheme XYZ-life offered by your bank,’ expressed the lady in a hurried tone., ‘You are most welcome Madam. But you know, as I am busy now, could you please come after half an hour or, tomorrow?’ asked the manager apologetically., ‘I have travelled about 15 kilometres to reach this place and I cannot come again,’ shot back the lady arrogantly., ‘Please try to understand my problem,’ requested the manager., ‘It is your problem,’ the lady replied back, ‘and it does not speak well of your bank if you turn down customers, like this,’ she added in an admonitory tone., ‘Sorry, madam, I did not mean to discourage you. I understand your problem and I will put a person right now, on this job.’, ‘Thank you,’ said the lady curtly and went to the person referred to., , Refer to the Students’ Resource for more situational dialogues., , SUMMARY, Conversations—both face-to-face and telephonic—involving listening and speaking are the most, frequently used form of oral communication. In order to be a successful conversationalist, one needs, to adopt certain strategies that can be useful for, both face-to-face and telephonic conversations., It is important to learn and practise how to start a, conversation, how to carry it on effectively and efficiently, and how to end it smoothly. The other fac-, , tors to keep in mind are listening intently, involving, others, arousing and sustaining interest, using appropriate language, etc., A dialogue performs the three-fold function, of narrating a story, giving information, and, describing the places or characters in the story., Dialogue writing requires great clarity of thought, with respect to time, realistic characters, and places., , https://abdullahsurati.github.io/bscit
Page 118 :
https://abdullahsurati.github.io/bscit, , CONVERSATIONS AND DIALOGUES, , 111, , EXERCISES, 1. Given below are three situational dialogues that, are jumbled. Arrange them in appropriate order by, writing down the number in brackets as shown, against one statement in Q. (a), (a) At the movie hall, Neha: Three., Cashier: Sorry, how many?, Neha: Excuse me, which screen?, Cashier: Screen 4, it is on the first floor., Neha: Three tickets for Avatar please (1), Cashier: Ok, here are your three tickets to, Avatar. It is showing on screen 4., Neha: Screen 4 on the first floor, ok, thanks., (b) Discussing a movie, Pinky: So you like at least something in the, movie., Manisha: I think we have wasted Rs 500 on this, movie., Pinky: Story and … the heroine., Manisha: hmm … then what was it that you, did not like?, Pinky: Was it so boring for you?, Manisha: It is strange, I like only the heroine!, Pinky: I like the locations, photography, and, music., Manisha: Yes, but …, Pinky: Leave it, let us have a good dinner at, least., Manisha: Of course, it was; for you?, (c) Discussing future, Gyanesh: Yeah, I feel bad about leaving the, campus., Guha: Thank you. Have a fruitful time in Matrix, and do mail me., Gyanesh: I would like to work for two years and, then go for higher studies in USA. What about, you?, Guha: From one university and most probably, I will join that., Gyanesh: Why did you choose Germany?, Guha: Hi, Gyanesh, that is the end of our 4-year, degree programme., Guha: I too. What about your future plans? Are, you going to join Matrix Developers or pursue, higher studies?, , Gyanesh: That sounds good. I am very happy, for you and wish you good luck., Gyanesh: Congratulations! Have you been, offered scholarship as well?, Guha: You know that I was selected for a, summer internship under DAAD and was, working with a professor in Siegen University, in Germany. I found the academic environment, and research facilities great and hence decided, to go for my MS there., 2. The following dialogue takes place between a, space scientist and a research scholar after a special lecture on ‘Climate Change’ organized on the, occasion of Antarctic Treaty Consultative Meeting, in New Delhi. The special lecture was very informative on global warming and climate change and, spelt out the importance of Antarctic research, in continuous monitoring of climate variations., Complete the dialogue by framing suitable questions or statements., (a) Research scholar: __________?, , Space scientist: Yes, many observations indicate, that the world’s climate has changed during, the twentieth century—the average surface, temperature has increased by about 0.6, degree centigrade. Snow cover and ice extent, have decreased. The sea level has risen by 10 to, 20 cm., (b) Research scholar: ___?, , Space scientist: Climate has and will always vary, for natural reasons. However, human activities, are increasing significantly the concentration, of some gases in the atmosphere, such as, greenhouse gases (mainly CO2), which tend, to warm the earth surface and anthropogenic, aerosols, which mostly tend to cool it., (c) Research scholar: _______?, , Space scientist: It is quite likely that the global, mean temperature should increase between, 1.4 and 5.8 degree centigrade. The northern, hemisphere cover should decrease further, but, the Antarctic ice sheet should increase. The sea, level should rise between 9 and 88 cm., (d) Research scholar: _____?, , Space scientist: Take for instance the regional, changes in climate, particularly increase in, , https://abdullahsurati.github.io/bscit
Page 119 :
112, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , temperature, which have already affected, some physical and biological systems. Both, natural and human systems are vulnerable, to climate change because of their limited, adaptive capacity. This vulnerability arises with, geographic location and time, as well as social,, economic, and environmental conditions., Some extreme weather events and the, damage, hardship, and death they cause are, projected to increase with global warming., (e) Research scholar: __?, , Space scientist: Well, you see, the projected, change in climate is expected to have both, beneficial and adverse effects on water, resources, agriculture, natural ecosystems, and, human health. But the larger the changes in, climate, the more the adverse effect should, dominate. Human populations are expected, to face increasing flooding and heat waves but, reduced cold spells. The geographic range of, infectious diseases should increase., (f) Research scholar: ____?, , Space scientist: Well, there are many technological options of reducing greenhouse gas, emissions, some at low or negative cost. Forests and agricultural lands provide significant, but not necessarily permanent carbon sinks,, which may allow time for other options. There, will be both costs and benefits associated with, reducing greenhouse gases. With coordinated, actions and international regimes, efficiency, and equity should improve. Further research is, required to strengthen future assessments and, to reduce uncertainties., (g) Research scholar: __?, , Space scientist: Well, you see, it is not possible to, link any particular event definitively to global, warming. But as the world warms, more of some, types of extreme events are expected, such, as heat waves, heavy precipitations, blizzards,, and droughts; for some other events, such as, extra-tropical storms, there is little agreement, between current predictive models., (h) Research scholar: __________?, , Space scientist: Ecosystems have a limited, capacity to adapt to climate change; some, , might not be able to cope as they had done, in earlier periods and are expected to suffer, damages because the rate and extent of, climate change is expected to be faster and, greater than in the past and could exceed, nature’s maximum adaptation speed. Human, activities and pollution have increased the, vulnerability of ecosystems., (i) Research scholar: ________., , Space scientist: The pleasure is mine and I hope, to see you on some other occasion., (j) Research scholar: ________________________, __________., , Space scientist: Bye and good day to you too., 3. Read the following dialogue and answer the two, questions:, ‘What happened to my proposal on introducing a, new centre for software development in our organization Harish?’ she complained. Come on,, give me an answer. Surely there must be something, you can tell me apart from “I will let you know”.’, ‘I am sorry, Ms Leela. The only aspect we are yet to, decide is the budget. As soon as I have got anything, concrete to say, I promise you will be the first to, know.’ Harish softened his words with a smile., He turned to leave. But she pleaded, ‘Listen, it is, pending for long. Do something quickly and let me, know.’, (a) What does it say about the relationship between the speakers?, (b) Who has the power in this exchange?, 4. Find two crowded places, such as railway station,, airport, restaurant, etc., and write down snippets, of conversations that you hear. For instance, you, may write down the conversation between two, friends, two professionals, etc., 5. Take an episode from one of your favourite television shows. Analyse it carefully. What did it reveal, about the characters? What was the mood of the, scene?, Now write a scene of your own for the same containing dialogues., , https://abdullahsurati.github.io/bscit
Page 120 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 7, , OBJECTIVES, You should study the, chapter to know, , • the importance of face-toface presentations, , • how to be clear with your, , purpose in your presentation, , • how to plan, structure,, , begin, develop, end, and use, effective body language,, voice, and visual aids in your, presentation, • how to handle questions and, criticism, • how to control nervousness, and stage fright while, making a presentation, • how to use MS PowerPoint, to create impressive, presentations, , Formal Presentations, , INTRODUCTION, Successful and inspiring speakers are remembered not only because, they were eloquent, humorous, or had a good style, but primarily and, principally because their messages and ideas caused a change in their, audience’s actions, attitudes, lives, or made the purpose clear to them., This is true for all types of presentations—professional presentations,, business speeches, classroom lectures, and so on, especially in an age, of instantaneous communication via telephone, computer, and fax., Face-to-face business presentations are enormous time consumers—, from scheduling a date when everyone can attend, to making every, arrangement necessary for the presentation, it takes much more time, and effort than it would have taken to send the same message as an, attachment in an email, in the form of a memorandum, circular, or, notice. Nevertheless, presentations still play an important role in, business for obvious and good reasons., Throughout our career, we are bound to encounter innumerable, situations that require professional presentations to be made.To mention, a few, a team leader may have to present before the corporate body about, a product that his/her team has brought out; a top administrator of an, institution may have to present the goals, activities, and achievements, of the institution to an important visitor; a project manager may, have to present before a committee the results of a project recently, undertaken by the company; a college student may have to attend, seminars or may have to present project reports to fellow students and, faculty members. These situations call, for effective, memorable presentations., ‘Half the world is, Although these circumstances differ in, composed of people who, purpose, the strategies in making good, have something to say and, can’t, and the other half, presentations do not differ much., who have nothing to say, The more successful our career, the, and keep on saying it.’, more, often will we be called upon to, –Robert Frost, make presentations for a variety of, https://abdullahsurati.github.io/bscit
Page 121 :
114, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , situations and audiences. Constant practice is the key to acquiring this skill. The following, points are to be attended to when preparing for a professional presentation., •, •, •, •, •, •, , Planning: Occasion, audience, purpose, thesis, and material, Outlining and structuring: Introduction, main body, and conclusion, Choosing the mode of delivery, Guidelines for effective delivery, Body language and voice, Visual aids, , PLANNING, Preparing and delivering the first business presentation or public speech in our life can be, daunting. We may find it difficult to decide what we want to say and how to say it, or perhaps, the thought of speaking before an audience scares us. It is true that some people are naturally, talented at public speaking. However, with some helpful guidance, anyone can prepare and, deliver a successful speech that will be remembered for all the right reasons., When preparing a presentation, the first instinct may be to sit down with a pen and paper, and charge ahead into the first line of the speech. However, devoting some time to careful, planning of the speech will save a lot of time and effort later on. Effective preparation enables, us to answer all the questions and doubts about our speech before they arise. The contents of, our speech, and how we deliver it, are based on five important factors:, • Occasion, • Audience, • Purpose, , • Thesis, • Material, , Occasion, Occasion refers to the factors such as the facilities available for our presentation, time, and, context of our presentation. Facilities include the venue or locale along with the projection, equipment, lighting, seating, ventilation, etc. Every location has its unique physical environment., We may present in magnificently large auditoriums or oppressively small conference rooms. We, need to know the physical setting; find out whether we will have a podium or a table, whether, we will have a public address system, and so on. Also, attention should be paid to the physical, conditions prevalent in the venue such as seating, room temperature, and lighting. We should, try to understand whether the audience will be seated on hard metal chairs for an hour in, a freezing room, whether the lighting will be too powerful to render our slide presentation, ineffective, etc. If we identify such problems in advance, we can either ask for alternative, arrangements or modify our materials, visual aids, and style to suit the environment., Time refers to both the time of the day of presentation and the duration of the talk., Straightforward and factual presentations may work well during the morning hours, but in case, of an after-dinner speech, we may need to adapt our remarks to the occasion. Remembering, the fact that most professional presentations are brief, we should present the important points, in the first few minutes., Context refers to the events surrounding our presentation. When we are presenting in a team,, for example, we need to consider the team members. They might have left a positive or negative, impression in the minds of the audience and, hence, we would need to adapt ourselves to the, existing situation just before presenting our part. Besides these immediate events, the recent, https://abdullahsurati.github.io/bscit
Page 122 :
https://abdullahsurati.github.io/bscit, , FORMAL PRESENTATIONS, , 115, , happenings in our company can also affect the presentation. For example, if you are about to, present a new proposal on budget just after your company has suffered a financial loss, you, should emphasize on those features of your budget that focus on reducing the costs., The occasion dictates not only the content of our speech, but also the duration, the tone, and, the expectations of the audience. For example, humour may be inappropriate during a serious, sales presentation, while it may be welcome during a wedding speech, or a sports event. We, should also be aware of our role and any observations that we might make during our speech., For example, if you are presenting the final report of your project to a group of professors or, senior colleagues, you need to take care of the short duration, firm but polite tone, and also their, expectations., , Audience, All audiences have one thing in common. They are at the receiving end of our communication., They may be our friends, clients, colleagues, sometimes unfamiliar faces, or a combination of, all these. The nature of our audience has a direct impact on the strategy we devise for our, presentation. Hence, it is necessary to have some prior knowledge of the audience., •, •, •, •, •, , What are their interests, likes, and dislikes?, Are they familiar with the topic?, Is their attitude hostile or friendly?, What is the size of the group?, Age range? Gender distribution?, , , Adapt your speech to your audience., , For instance, people from a particular culture may feel uncomfortable asking questions, or may not reveal their feelings through facial expressions. If we know in advance how our, audience is likely to react, we can structure our presentation and adapt our style to help them, feel comfortable. We are also less likely to feel distressed by their reactions., If we are going to speak before an unknown group, we can ask, ‘It is a remarkable, our host or the organizer for help in analysing the audience and, observation that the more, supplement their estimates with some intelligent guesstimates, learned and respected the, of our own. Whether we present locally or in a foreign country,, researcher, the simpler, we can expect at least some members to have linguistic or, their talks often seem to, be.’, cultural backgrounds different from our own. Those who are not, –Mike Grimble, very conversant with English or with our accent will appreciate, https://abdullahsurati.github.io/bscit
Page 123 :
116, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Tips for Creating an Impact on the Audience, • Before beginning your presentation, look at all, the sections of the audience., • Always begin with a smile and greet them in, pleasant tone., • Give the impression that you are not lecturing, but sharing your views with them., • Modify your tone/material according to the, reaction of your audience. For instance, if you, find them bored or not understanding your, point, soften your tone, ask them if they have any, difficulty and give one more clearer example., • Choose examples that are familiar to the, major section of the audience (e.g., if you are, presenting on ‘Meditation’ you can give example, of a student who has found a significant, improvement in his power to concentrate by, regularly practising meditation)., , • Choose words as per your audience’s background, (e.g., if you are giving a technical presentation, to your professors or classmates, you can use, specialized terms. When you are presenting to, non-technical audience, simplify or define terms, such as ‘lean manufacturing’, ‘mach 2’, etc.)., • Do not get annoyed if there is a slight disturbance, among the audience (say, two people at the, back are whispering something)., • Concentrate on your ideas and be with the topic, rather than thinking on what impression you are, making in the audience’s minds., • Inform the audience at the start of your presentation whether you would prefer to answer their, queries at the end or you would not mind being, interrupted., , relatively slow speech and visual aids designed to aid their understanding. We should also adjust, our style to accommodate cultural differences., While speaking on a controversial topic, we ought to keep aside some time to tackle any, opposition from audience. For example, if your topic is on ‘Criteria for selection of projects’ you, may face a lot of opposition from those teams which do not conform to certain criteria. So, you, need to be patient in listening to them and then only should react. Give the impression to your, audience that you want to share your views with them., The structure of a presentation can further be skilfully emphasized by pauses, through, interactions with the audience, and through changes in delivery techniques., If we are going to speak about something controversial or if we have to break some bad news, perhaps, we can set aside some time before our presentation to chat with those who will be, affected. This will help to:, • Build support, • Anticipate problems, , • Consider strategies, , Testing the waters beforehand, so to speak, will help to fine-tune the approach. Speak with, confidence and conviction. Make your points crystal clear and easy to understand. Maintain, an attitude of alertness and confidence. Encourage questions from the audience. Audience, participation gives the opportunity to clear up any misunderstanding., , Purpose, There can be three different purposes of a presentation: to inform, to analyse, or to persuade., The purpose of a presentation not only decides the content and style but also affects the amount, of audience interaction. For instance, when our purpose is to provide information or to analyse, a situation, we generally interact with the audience in a limited manner. Examples of typical, https://abdullahsurati.github.io/bscit
Page 124 :
https://abdullahsurati.github.io/bscit, , FORMAL PRESENTATIONS, , 117, , presentation forms with an informative purpose can be a presentation at the new employeeorientation programme or an explanation of our project status., On the other hand, when our purpose is to persuade people to take a particular action,, collaborate with them in solving a problem, or making a decision, the interaction would be more., We generally begin by providing facts and figures that increase our audiences’ understanding of, the subject; we may also offer arguments in defence of certain conclusions and recommendations., In addition, we invite them to participate by expressing their needs, suggesting solutions, and, formulating conclusions and recommendations. However, this would need a lot of ‘on-the-spot’, thinking skills and in-depth knowledge of the subject. Sales presentations, speeches by political, leaders during election, etc., come under the category of persuasive presentations., At times, our goal may be to help the audience have a good time. When we welcome the, gathering at a conference, we are cheering and gearing them up for the coming sessions., Likewise, when we give an after-dinner speech at a company gathering or an awards dinner,, our purpose is to leave the group in a jovial mood. Depending on the purpose, we should be, flexible enough to adjust to new inputs and unexpected audience reactions., , Thesis Statement, The thesis statement is very important in a presentation because it spells out the subject and, establishes its impact among the audience. It is also the central idea of a presentation. Using a, question or a sentence fragment should be avoided. Simple language should be used to frame, a complete, declarative statement. Let us look at the following versions of thesis statement, written by a student for a presentation on Choosing a reputed university for higher education. We, can observe that the first two are ineffective for the reasons mentioned in parentheses, while the, third is an effective thesis statement., • Why should we be careful in choosing a reputed university? (question: does not reflect, the content), • Choosing a reputed university for higher education (fragment: does not tell anything, specific; repetition of the topic of presentation), • Choosing a reputed university for higher education has five significant advantages (tells, the audience that they will know these benefits after listening to the presentation), , Begin to formulate your thesis statement as soon as you select your topic and decide on your, purpose. Then allow yourself enough time to explore and develop your ideas. Shown below are, the steps to arrive at your thesis statement:, Topic: Choosing a reputed university for higher education, Topic area: Advantages of a reputed university, General purpose: To inform, Specific purpose: I wish to tell my audience about the benefits they will reap by choosing a, reputed university, Thesis statement: Choosing a reputed university for higher education has five significant, advantages., , Material, Once we complete formulating our thesis, we need to develop the information that elaborates, it. Collecting material requires some research. For example, when we are explaining a process, or procedure, the main text of our presentation will include a series of steps involved. Similarly,, https://abdullahsurati.github.io/bscit
Page 125 :
118, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , when we are giving a product presentation, besides the complete information about the product,, we may have to collect information pertaining to the competing products and their features. For, most of the professional presentations, we may have to consult the library, Internet, magazines,, newspapers, organizational records, statistics, and publications. Sometimes, we may even have, to collect information through surveys or interviews. We may also have to contact external, organizations to procure information for some of our presentations. Once we finish collecting, material and ideas for our presentation, we should assemble them at one place. We may list all, the ideas on a piece of paper and then organize them., , OUTLINING AND STRUCTURING, An outline is a framework in which bits and pieces of the presentation material are fitted., It serves as a guide to show us the right path for our presentation. Hence, spending time in, developing an outline never goes waste. In fact, we can use an outline as our ‘script’, but should, be prepared to deviate in response to audience feedback., Suppose we are planning to deliver a presentation on ‘Graduate study in the USA’ to the, graduating students of a college. This may be a thirty-minute presentation about the steps and, requirements to pursue an MS or PhD programme in the US universities. The outline can be in, the form of words, phrases, or sentences:, •, •, •, •, , Introduction, Decision-making, Basics of US higher education, Graduate study programmes, – MS, – PhD, • Application forms, • Admission procedure, , • Requirements, – Statement of purpose, – Academic aptitude, – Professional development, – Personal qualities, – Presentation skills, – Recommendation letters, • Conclusion, , We may have to revise the subheadings under each or some of these main topics. But, as, already said, we should be ready to skip or add some topics if the audience wants us to do so., We will learn more about outlining in Chapter 13 on reports., Structuring or organizing the material clearly is vital for an effective presentation. A wellorganized presentation can make our messages more comprehensible, create the desired effect on, our audience, and boost our image as a speaker. On the other hand, rambling or taking too long, to get to the point, including irrelevant material in the speech, omitting necessary information, or, messing up the ideas can lead to a chaotic structure. Even experienced speakers get into trouble if, their material is not organized appropriately and end up confusing their audience., The key to all these problems is to organize our ideas into a well-known pattern. First, we, need to tell our audience what we want to tell them; then, we should tell them the ideas; and, finally, we should repeat what we have already said. In other words, a presentation should have, the following format:, • Introduction should grab attention, introduce topic, contain a strategy for establishing, credibility, preview the speech, establish rules for questions, and have a smooth transition, to the main text., • Main body should contain all the main points and supporting material; the entire matter, should be organized into a logical sequence., • Conclusion should contain signal, highlight/summary, closing statement/re-emphasis, a, vote of thanks, and invitation to questions., https://abdullahsurati.github.io/bscit
Page 126 :
https://abdullahsurati.github.io/bscit, , FORMAL PRESENTATIONS, , 119, , Introduction, Look at the following introduction to a presentation on ‘Effective use of DDT-based, Insecticides’., , Sample introduction, Good morning friends and wish you all a happy World Environment Day! (Greeting and reference, , to the day), , Before starting my presentation, let me ask you a few questions: How often do you use DDT-based, insecticide in your homes or offices? Do you find them effective? Have you heard of their misuse? Are, you aware of their harmful effects and how to control them? (Attention grabber), , Well, I am glad that you find them useful and you use them in your homes and offices. But today, I am here to talk about the measures you need to take in order to optimize the benefits of such, insecticides. Yes, my topic is ‘Effective use of DDT-based insecticides’. DDT, a chemical compound, present in insecticides is dangerous when misused, but you can prevent serious health problems by, carefully following directions. (Revealing topic and thesis statement), I would like to tell you that I have been doing research on various kinds of insecticides—their, production, distribution, effects, hazards, remedies, etc., for the last several years and have come up, with a number of recommendations for their effective use. (Credibility statement), , We will first define and discuss the effects of DDT, then the types of DDT-based insecticides and, their effects, the inappropriate way in which people use them and finally suggestions to use them, effectively. (Preview), If you want to ask any questions or give any comments please do so when the presentation gets, over. I’ll complete my presentation in twenty minutes and you will have the next ten minutes for the, question and answer session. (OR) Please feel free to interrupt me by raising your hands if you have, any query. (Rules for Q&A), So let me begin with the first point, what is DDT? (Transition from introduction to main, , body), Compare this with an introduction that starts like:, , Good morning ladies and gentlemen, today I am going to talk on effective use of DDT-based, insecticides…, , and then straight away goes to the first main point. Think over, which one, according to you, may, catch the attention of your audience so as to persuade them to listen to the rest of your speech?, The introduction to a presentation does the job of the preface to a book. It catches the, attention (attention grabber) of the audience, tells them the topic and purpose (topic and, thesis), develops in them a trust for the presenter and the presentation (credibility), kindles, their interest in what the presenter is going to speak in the minutes to come (preview), and, takes them slowly into the main body of the speech (transition). Having gone through the, sample introduction, let us look into its components in a little more detail:, , Greeting, We can start with good morning/good afternoon, etc., or can begin by (a) extending a, compliment to our audience—I feel good to present before an intelligent/august gathering like, yours/It is refreshing to look at your bright faces this morning; (b) referring to the location or, https://abdullahsurati.github.io/bscit
Page 127 :
120, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , occasion—I hope you all had a good time at the river cruise last evening; On the occasion of, World Education Day, let me wish all of you to have lifelong learning., , Attention grabber, This catches the attention of our audience and prepares them to listen to the rest of our, presentation. Depending on the topic, we can use a question, a quotation, a startling statement,, an anecdote, or even a video or audio clip to grab the attention of the audience. For example,, as in the introduction to ‘Effective use of DDT-based insecticides’ given above, you can begin, your presentation with a series of questions: ‘How often do you use insecticides? Are you aware, of their harmful effects?’ or with the statement, ‘You would be shocked to know that thousands, of people die every day by the careless use of insecticides’., Imagine that you are giving a presentation on the topic ‘The Role of Emotional Intelligence, in Developing Leadership Skills’. You can start your presentation with an anecdote similar to, the one given below:, On Friday, when I was attending a meeting, I could barely control my open appreciation of Ms Veena, the, Chairperson. You may wonder why. I will tell you now. She was able to resolve the conflict between two, participants amicably simply by using intelligence to understand their emotions. Yes, friends, in today’s business, world, emotional intelligence plays a very important role in cultivating various skills—leadership skill is one of, them., , After catching the attention, state clearly and precisely the purpose of your presentation. For, instance, it can be as pointed as this—‘One reason brings me here today—to inform you about, our new performance appraisal system’., , Topic and thesis statement, As the topic is very important, we need to include it in our visual aid (PowerPoint slide or, overhead transparency) and project the same. Then our specific purpose can be stated in the, form of a thesis statement as previously discussed under the heading ‘Thesis’., Credibility, Many factors may help us develop trust in the audience’s minds for us and our presentation, matter. While the audience may believe us because of our power/status/experience, we may, need to speak out explicit statements in order to establish credibility in their minds if we are, young or inexperienced. We can achieve this goal by stating our interest in the topic, by quoting, some relevant statement from a recent newspaper or magazine, or by informing them how, much research we have done on the topic., Preview, We can tell our audience what is coming ahead in our presentation. We can also give a brief idea, about the issues we are going to cover in the given time. This can be done by showing the slide, containing the main topics and subtopics in the presentation outline., Rules for question and answer session, Good presenters always anticipate questions and prepare their answers as well during the, preparation stage. It is better to inform the audience in the beginning itself whether they can, ask questions during or after the presentation., https://abdullahsurati.github.io/bscit
Page 128 :
https://abdullahsurati.github.io/bscit, , FORMAL PRESENTATIONS, , 121, , Transition, Before going to the slide containing the first main point, we can speak out a phrase or ask a, question to provide a link between the introduction and the main body of the presentation—, ‘now that you know what are the issues I am going to discuss today, let me begin with the first, point, that is, ….’; ‘So, what are the characteristics of a reputed university?’—It is better to adopt, a uniform style to state the main points of a presentation; that is, all the points are in the form, of phrases, questions, etc. Do not mix different formats., A good introduction creates interest and leads the audience effectively into the main body, of the speech., , Main Body, The main body, the discussion, or the text part follows the introduction and supports the aim or, specific purpose of a presentation. The major points we highlight in our opening section will be, expanded here. Depending on the topic, and the introduction part, we can choose from any of, the following patterns to organize the main body of a presentation., Chronological This pattern can be used for organizing points that can be arranged sequentially, (in the order in which the events occurred or appeared before us). The entire presentation can, be arranged chronologically. This method is useful for topics such as ‘the profile of our institute’,, ‘the changing face of the earth’, and ‘history of sports’., Categorical This is one of the easiest and most commonly adopted patterns for many topics., The entire presentation can be divided into various topics and subtopics arranged on the basis, of subordination and coordination. This can be used for topics such as ‘the role of advertising’,, ‘environmental protection’, ‘importance of professional presentation’, etc., Cause and effect This method can be adopted whenever a ‘cause and effect’ relationship, exists. Here, we have to illustrate and explain the causes of the situation and then focus on the, effects. It is relevant for topics such as ‘impact of cinema on children’, ‘Internet—boon or bane’,, ‘global warming’, etc., Problem–solution Here, we divide the presentation into two parts. In the first part, we, describe and analyse the problem. After the analysis we move on to the main objective of the, presentation to suggest or propose a solution to the problem. It is a very helpful and effective, way for persuasive presentation. For topics such as ‘population explosion’, ‘addiction to gaming’,, etc., this method can be used., We can strengthen our argument or ideas by providing examples, illustrations, statistics,, testimonies, analogies, or definitions., Supporting material Solid ideas do not always impress our audience. We need to back up, our well-organized points in a way that makes the audience notice, understand, and accept, our message. In other words, we need to use plenty of supporting material or develop our core, points adequately., As demonstrated by the examples given in Table 7.1, supporting material not only clarifies, the main ideas, but also makes them more vivid and meaningful to the audience. In addition,, they help establish and prove our main statement. Let us now discuss the various categories of, supporting material (Table 7.2)., Definitions When we deliver a presentation on a topic that we feel that the audience is not, too familiar with, we can use a definition to develop our idea., https://abdullahsurati.github.io/bscit
Page 129 :
122, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , TABLE 7.1 Examples of supporting material, , Main statement, , Supporting statement, , • Replacing the lens in the laser projector is not as • Let me show a diagram that demonstrates how to do it, complicated as it seems, • We could increase sales by extending the store timings • An article in Business Today cites statistics showing that, until late in the evening, shops that extended their working hours to 10 p.m., boost profits by more than 20% of the direct overheads, involved with longer business day, • A reputed university always has an excellent placement • In an interview with ABC channel, the VC of XYZ, record, university said, ‘99 per cent of our students have got, offers from IT, manufacturing, consultancy, healthcare,, and other industries’, TABLE 7.2 Kinds of supporting material, , Type, , Definition, , Function, , Speech occasions, , Tips, , Definition, , Explaining difficult, term(s) with the, help of simple, terms, A brief reference that, illustrates a, point, Quantification of the, main point, , To clarify, , Used in informative/, technical presentations, , Use easy and known, terms, , To clarify and add, interest, , Used in all types of, presentations, , To clarify, prove,, and add interest, , Used widely in presentations where sales figures,, survey results, etc., are to, be explained, Make the comparisons, vivid: select familiar, analogies, , Use situations with, which your audience, may be familiar, Round off the numbers,, support with visuals, and, explain adequately, , Example, , Statistics, , Analogy, , Process that, shows how one idea, resembles another, , To clarify, add, interest, and prove, , Testimony, , Opinion of experts,, peers, or, celebrities, , To clarify, add, interest, and, prove, , Used in sales, presentations, , Used in business, presentations involving, products, processes, and, procedures, Memorize/paraphrase/, read verbatim, cite source,, use sources credible to, your audience, and follow, up with re-statement of, explanation, , For example, we can start the main body of a presentation on ‘Artificial Intelligence’ with, the definition:, , Artificial intelligence (AI) is the intelligence of machines and the branch of computer science that aims to create, it. John McCarthy at MIT coined this term in 1956., , Examples Examples are the most commonly used supporting material in presentations. They, give life to our ideas and make them immediately comprehensible to the audience. Almost all, effective speakers use examples in their presentations., https://abdullahsurati.github.io/bscit
Page 130 :
https://abdullahsurati.github.io/bscit, , FORMAL PRESENTATIONS, , 123, , Artificial intelligence (AI) has a wide range of applications such as computer games, neural networks, robotics,, and many other areas of technology. For instance, by using AI, you can study the human behaviour. You can, assign human characteristics to several characters, program them, allow them to behave in various situations,, and then study them., , Statistics Engineers, scientists, and business professionals use statistics that represent numerical, data relating to groups of individuals or experiments to substantiate their ideas and strengthen the, understanding of their audience. Statistics help to make certain arguments more convincing. They, are used in presentations related to sales trends, trends in epidemic, experimental results, size of, market segments, and the like. Most statistics are collections of examples reduced to numerical, form for clarity and easy comprehension of a complex idea. When handled well, statistics are an, especially strong proof, because they are firmly based on facts and because they show that the, speaker is well informed. Consider the excerpt from the speech of Aditya Vikram Birla, ‘Let the, Competition be Afraid of Us’, delivered at a conference organized by Euromoney in New Delhi., We also have a vast bank of talent, with over 3.5 million scientific and technical personnel, trained in the English, language, of a quality and at a cost unmatched. India has a well-developed capital market. We have 21 stock, exchanges with over 2,000 actively traded scripts, compared with 220 in Indonesia, 354 in Thailand, 423 in, Malaysia, 235 in Singapore, and 181 in the Philippines., , Statistics are best presented using visual aids. When presenting statistics, the statistics should, be explained completely. Unless we are presenting statistics developed or collected by ourselves,, we need to cite the source in the slide and also to mention it while presenting., Analogy An analogy can make a point by showing how one idea resembles another. Analogies, compare items from an unfamiliar area with items from a familiar area., When we want to talk about the basics of electronics, we can compare the components, with the elements of hydraulics. We can say, ‘current is measured in amperes and is equivalent, to the volumetric quantity of flowing water over time’. As ‘flowing of water’ is understood by, everybody, this analogy may be understood by all., Whenever we propose adopting a policy or using an idea because it works well somewhere, else, we can use comparisons. Presenters mostly use literal comparisons that link similar items, from two categories. Look at how N. R. Narayanmurthy, the founder and former Chairman and, CEO, Infosys Technologies Ltd, uses comparison as a device to explain his idea pertaining to, professionalism in India and the western countries:, , ‘Yet another lesson to be learnt from the West is about their professionalism in dealings. The common good being, more important than personal equations, people do not let personal relations interfere with their professional, dealings. For instance, they don’t hesitate to chastise a colleague, even if he is a personal friend, for incompetent, work. In India, I have seen that we tend to view even work interactions from a personal perspective. Further, we, are the most ‘thin-skinned’ society in the world—we see insults where none are meant. This may be because we, were not free for most of the last thousand years.’, (Excerpt from a lecture delivered at the Lal Bahadur Shastri Institute of Management, New Delhi, on, 1 October 2002.), , The strength of an analogy lies in the choice of the points of comparison and the effectiveness, with which we deliver it to our audience. An analogy should always be short and simple, and use, of a wrong analogy that may confuse the audience should be avoided., , Testimony Testimonies are remarks made by others who are authoritative or articulate, and could make a point more effectively than we could, on our own. For instance, when, the chairman of Steel Authority of India Limited says something about the production, https://abdullahsurati.github.io/bscit
Page 131 :
124, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , technology of steel, people will accept it without a question because he is an authority in, the field of steel production. Same is the case with Sachin Tendulkar quoting something on, cricket. Therefore, to add punch to our talk on team effectiveness in cricket, we can quote, Sachin Tendulkar:, ‘Isn’t cricket supposed to be a team sport? I feel people should decide first whether cricket is a team game or, an individual sport.’, , (Source: http://www.brainyquote.com/quotes/authors/s/sachin_tendulkar_2.html), , Other testimonies include: remarks made by a celebrity who may be a non-expert in the, field, an article written by a relatively unknown person in a journal or newspaper, some good, arguments put forth by our colleagues/relatives/professors, etc. Testimonies also help build a, persuasive case. Whenever we use a testimony in a presentation, we should cite the source and, quote verbatim if it is short. If it is lengthy or confusing, we should try to paraphrase., The temptation to include too many points in the body of a speech should be resisted. We, should restrict ourselves to four or five main points. We can help the audience follow our, presentation by summarizing the points as we go along. Every main point is a unit of thought, and an essential part of the speech. Each point should be clearly stated, independent of the, other main points. Hence, we need to balance the time devoted to each point accordingly., We should plan on bridging the main points so that we can move smoothly from one part of, our presentation to the next. We can make use of transitional expressions such as ‘therefore’,, ‘because’, ‘in addition to’, ‘apart from that’, ‘on the contrary’, ‘next’, etc., , Conclusion, The conclusion of a presentation provides yet another opportunity for us to impress the, audience. Hence, the conclusion should be prepared and presented with the same interest, as we take for the introduction. We can conclude our presentation by reviewing the main, points. A signal such as to sum up, to conclude, to review, in the end, etc. to indicate the end of, the presentation must be used. As we conclude, we should remind the audience briefly about, the purpose of our presentation, which could be either to persuade them or to inform them., We should tell them what we want them to do, think, or remember based on the presentation., The temptation to wrap up in haste or add something new in this part of the speech should, be avoided., We can also conclude with a quotation or can recall the earlier story, joke, anecdote with, which we commenced our presentation to bring it to a full circle. Some presenters bring in a, change in the pace or pitch of their voice. They slow the rate and speak in a lower pitch so as to, mark the difference between the main body and conclusion of their presentation., , NUANCES OF DELIVERY, All of us have listened to more than our share of bad presentations. We have sat through, presentations that were delivered so haltingly that we could not care what was being said. We, would also have come across presentations that were delivered smoothly but had practically put, us to sleep, as the presenter droned on endlessly. However, if delivered effectively and efficiently,, presentations can capture the audience’s attention without the risk of being shuffled aside. We, can reveal our enthusiasm to the audience better than any other means of communication and, can address their questions or objections directly., https://abdullahsurati.github.io/bscit
Page 132 :
https://abdullahsurati.github.io/bscit, , FORMAL PRESENTATIONS, , 125, , Modes of Delivery, What is it that makes our presentation hold the attention and interest of the audience? Our, manner of presentation, our vocal inflections, our perfectly timed pauses, our facial expressions,, and our gestures—all these are part of an expert delivery. Even a dull and drab topic will turn, out to be more interesting if presented well, whereas a really interesting topic may appear, to be dull because of poor delivery. So one thing becomes clear—having something to say is, not enough; you must also know how to say it. Good delivery does not call attention to itself. It, conveys our ideas clearly, interestingly, and without distracting the audience. Most audiences, prefer delivery that combines a certain degree of formality with the best attributes of good, conversation—directness, spontaneity, animation, vocal and facial expressiveness—and a lively, sense of communication. The following discussion provides some suggestions so as to enable, one to select the best mode of delivery for a presentation. There are four modes of delivery that, can be used for making presentations:, • Extemporaneous, • Manuscript, , • Impromptu, • Memorization, , Extemporaneous mode, Extemporaneous presentation is by far the most popular and effective method when carefully, prepared. When speaking extempore we must prepare the notes beforehand and rehearse, our presentation. There is no need to learn every word and line by rote. Our presentation will, sound quite spontaneous to the audience, as after thorough preparation, we are speaking while, thinking. Careful planning and rigorous practice enable one to collect the material and organize it, meticulously. Let us look at some of the positive and negative aspects of this mode of presentation., Advantages, , • As we have enough time to prepare for the presentation, we work hard on the theme/, central idea. We can present the theme in the best possible structured way., • Thorough preparation on our part makes us feel secure and we carry out our responsibility, with self-confidence and assurance. Adaptation is also possible if the need arises. In, other words, the language of any written text does not bind us. We can be flexible in our, use of language., • Supporting material helps to present our points clearly and also adds weight to our, agreement. Appropriate selection of quotations, illustrations, statistics, etc., helps us to, substantiate our point., • Our delivery sounds natural and spontaneous to the audience as it allows us to establish, a rapport with the audience through more eye contact., • It enables us to move freely, with ease., , Disadvantages, , • If preparation is inadequate, we can get lost and find ourselves uncomfortable., • If we rely too much on note cards and start reading out from them instead of just, consulting them for reference, then the speech will lose its spontaneity., , Manuscript mode, In manuscript presentation, material is written out and we are supposed to read it out, aloud verbatim. We are not supposed to memorize the speech and then recollect it. It is, https://abdullahsurati.github.io/bscit
Page 133 :
126, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , there in front of us to read. But, we should be wise enough not to attempt to read a speech, until we have become a proficient reader. Unfortunately most speakers are not good, readers. They make it uninteresting by reading in a dull and monotonous way. However,, we can overcome this problem with consistent efforts. We could maybe rehearse with a, friend or colleague., For effective use of this mode, we should go through the material several times beforehand, until we become absolutely familiar with the text. We should strive to choose material designed, to achieve understanding. We should know what is written where., Advantages, , • It is a permanent and accurate record of whatever we have to say., • There is no chance of tampering with the facts and figures., • The material is organized systematically. We just have to keep in mind the step-by-step, development of main points., • Language gets polished because we can write and rewrite our material until we feel, satisfied on all counts., , Disadvantages, , • Since we will be reading from the manuscript, we get less time for making proper eye, contact, which is essential to feel the pulse of our audience., • Since we will be reading to the audience, we cannot talk to them. There is not much, scope either for non-verbal communication., • Adaptation is rather difficult, if the need arises, to give a different twist to our material., • In the absence of effective reading skill, we fumble over words, lose our pace, and miss, punctuation marks, etc. This adds up to an uninteresting speech and loss of audience, attention., • Conversational flavour along with vocal inflection takes a back seat here, which is a great, asset for a speaker., , I wish I could have, rehearsed this one., , Impromptu mode, The impromptu mode, as the word suggests,, is what we use when we have to deliver, an informal speech without preparation., For example, at a formal dinner party you, may be invited to deliver a vote of thanks., Do not panic and babble something in an, unmethodical way. Instead, calmly state, your topic and then preview the points, you are to make. Support your points with, whatever examples, quotes, and anecdotes, you recall at that time. Then briefly, summarize or restate your points and end, with a smile. Remember, it is not difficult, for you to anticipate certain occasions, where you may be asked to speak a few, words. Be as brief as possible during your, impromptu presentations., , Mr Naidu was called upon after dinner to give an impromptu speech., https://abdullahsurati.github.io/bscit
Page 134 :
https://abdullahsurati.github.io/bscit, , FORMAL PRESENTATIONS, , 127, , Advantages, , • We sound very natural because we do not get enough time to make any elaborate, preparation., • We get a chance to express our thoughts irrespective of what others think or say about, that particular topic., • We are spontaneous as we say what we feel, not what we ought to say., , Disadvantages, , • The presentation lacks organized development of ideas because of the shortage of time., • There is no supplementary material (no data, no statistics, no illustrations, no figures) to, substantiate the speech., • Chances of rambling are very high. Various points may hang loose., • There is frequent use of vocalized pauses., • The presentation may turn out to be a failure if the speaker has inadequate proficiency in, the language he/she uses., , Gaining a reputation for being a good impromptu speaker can do a great deal for our career, aspirations. It has been shown that there is a positive correlation between communication, effectiveness and upward mobility., , Memorization mode, This method of presentation is very difficult for most of us. Probably only a handful of us can, actually memorize an entire speech. Usually we memorize only the main parts and are in the, habit of writing key words on cards to help us out through the actual presentation. In some, cases, if we wish to quote somebody or narrate an anecdote or a joke, it is better to memorize, these for our presentations., This type of delivery stands somewhere between extemporaneous and manuscript, presentation. Speech is written out beforehand, then committed to memory, and finally, delivered from memory., Advantages, , • It is very easy for such speakers to maintain an eye contact with the audience throughout, the presentation., • The speaker can easily move and make use of appropriate non-verbal communication to, add extra value to the speech., • It is possible to finish the speech in allotted time., , Disadvantages, • Memorization requires too much of time., • There are chances of making it a dull and monotonous presentation because we go, exactly by whatever we have memorized., • Even our memory skills may fail us if we have not rehearsed adequately., • No flexibility or adaptation is possible during the speech., • The speaker gets flustered if he/she forgets a word, sentence, or a whole paragraph., , Among all the four modes of delivery, extemporaneous is the best because of its flexible, nature and its effectiveness. Hence, it is always better to use this mode to make presentations, more lively, effective, and memorable., https://abdullahsurati.github.io/bscit
Page 135 :
128, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Guidelines for Effective Delivery, Success of any presentation also depends on the various elements—verbal, non-verbal (body, language), vocal, and visual—used during a presentation., , Verbal elements, Word pictures We may give our speech a graphic quality by painting word pictures that allow, the audience’s imagination to take over. Specific details allow an audience to see the scenes we, are describing. Our major job as a speaker is to tell somebody something. We should present, our point clearly and just enough so that the listener clearly understands the intended message., The task is not merely to get words out of our mouth, but to transfer ideas into the listeners’, minds., Warm words Cold words leave us uneasy and unsure while warm words make us feel secure, and comfortable. Words are powerful. They conjure images, evoke emotions, and trigger, responses deep within us and we react, often without knowing the reason. In the early days of, instant coffee, advertisers got off to a bad start by stressing words such as ‘quick’, ‘time-saving’,, and ‘efficient’. All these words are without warmth and feeling. Makers of fresh coffee fought, back with warm, happy, and appetizing words such as ‘aroma’, ‘fresh’, and ‘tasty’. The instant, coffee industry learnt the lesson and its product became ‘delicious’, ‘rich’, and ‘satisfying’. Sales, soon boomed., Words also suggest whether something is good or bad. We should use those words that, strengthen our arguments and weaken those of our opponents. For example, look at the, following words:, Good, , Bad, , • Independent, , • Unaccountable, , • Well-regulated, , • Red tape, , • Free-thinking, , • Wishy-washy, , • Appropriately rewarded, , • Fat cat, , Similes and metaphors Although technical presentations do not require the use of similes, and metaphors, we cannot deny that they not only add flavour to a speech but also make abstract, ideas imaginable. Reach for vivid comparisons your listeners can understand and remember. Try, the following metaphors in your speeches:, •, •, •, •, •, , As inflexible as an epitaph, As cold as outer space, Building a business is like building an empire, As profitable as a gold mine, Delay is the deadliest form of denial, , Impact words ‘We’ and ‘you’ are the most important words of all. We cannot stir the audience, up if we do not address them directly and relate them to us and our topic. Remember the fiveto-one rule: Every time you use the singular ‘I’, try to follow it with five plurals. Given below are, some words that you may use in your presentations or speeches to get desired results:, discovery, guarantee, love, proven, safely, easy, health, vigour, money, results, save, protect, interest, challenge, opportunity, excitement, enthusiasm, flourish, progress, favourable, adaptation, circumstances, https://abdullahsurati.github.io/bscit
Page 136 :
https://abdullahsurati.github.io/bscit, , FORMAL PRESENTATIONS, , 129, , Smooth flow We can also make our speech flow smoothly and gracefully from beginning to, end by using some transitional devices. They promote clarity, emphasize important ideas, and, sustain our listeners’ interest. Some transitional devices are discussed below:, • Bridge: A bridge is a word that alerts the audience that we are changing direction or, moving to a new thought. Some examples are:, , , (a) We completed the project in January. Meanwhile other developments were taking place., , (b) That was bad enough. However, there was even worse to come., , • Number item: A number item keeps the listeners informed about where we are in a, presentation, which covers several points such as:, , , The first advantage of the new plan is …, , The second benefit of the plan is …, , • Trigger: A trigger is a repetition of the same word or phrase to link one topic with, another, such as:, That was what the financial situation was like in March. Now I will tell you what it is like today., , • Interjection: An interjection is a word or phrase inserted in a commentary to highlight, the importance or placement of an idea, such as:, , So what we have learned—and this is important—is that, it is impossible to control personal use, of office telephones., , Now here is another feature—perhaps the best of all—that makes this such a terrific plan., , • Internal summary: Internal summary helps our audience stay oriented by providing a, one-sentence summary during the course of delivering the main text of our presentation,, such as:, Now, you can see that the problem grew from several causes: a shortage of parts, inexperienced, maintenance people, and the overload of opening a new warehouse., , • Internal preview: An internal preview, like an internal summary, orients the audience by, alerting them to the upcoming points, such as:, , You are probably wondering how all these changes will affect you. Well, some of them will make, life much easier, and others will present some challenges. Let us look at three advantages first,, and then we will look at a couple of those challenges I mentioned., , • Signpost: Signposts tell our audience where we are in our presentation. When we say,, ‘There are four advantages, as I had already said. Having discussed the first two of them,, let me move on to the third advantage’, the statement would serve as a signpost to tell the, audience that we have completed two and there are two more to go., • Rhetorical question: A rhetorical question can subtly change the direction of the, discussion, such as:, That is what a change of image can do to a company. So how can we improve our image?, , • Flashback: A flashback is a sudden shift/reference to the past, and breaks what seems to, be a predictable narrative. For example:, , , Today, we are the market leader. However, three years ago, this was not the case., , • List: A list is a very simple way of combining apparently unrelated elements, such as:, We made four attempts to solve the problem., , • Pause: A pause is a non-verbal method of showing our audience that we have finished a, section of our speech and we are about to move on to another., https://abdullahsurati.github.io/bscit
Page 137 :
130, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Physical movements: Physical movements towards a visual aid, such as a black/white, board, flip chart, or screen, suggest that we are moving on to something new., • Quotations, anecdotes, and jokes: A quotation, anecdote, or joke can serve as an excellent, link. We may see a joke like the one given below as a good link to the idea that one may, wish to take up next:, The Chairman told me a story of a job applicant who said, ‘I like the job, sounds fine, but the last place I worked, at, paid more, gave more overtime, more bonuses, subsidies, travel allowances, holidays with pay, and generous, pension schemes.’, The Chairman said, ‘Why did you leave?’ The applicant answered, ‘The firm went broke.’, , Non-verbal elements, Our appearance, facial expressions, eye contact, postures, gestures, and the space we share with, our audience, all communicate our interest, enthusiasm, dynamism, intention, and confidence, to our audience. Whatever the occasion, the following tips will help you to use body language, effectively during your presentation., • Wear a formal dress and use simple accessories; take care of your personal hygiene, • Use facial expressions to exhibit your enthusiasm and interest; do not show your irritation, or anger even when someone interrupts you or asks a question that appears to be silly to, you; be polite in answering them, • Make eye contact with all sections of the audience (avoid staring at somebody) to observe, their reactions and also to show your sincerity and interest, • Use well-timed gestures; avoid monotonous gestures, • Stand tall and straight with shoulders upright; walk/move swiftly; avoid too many and, monotonous movements, • Do not come very close to the audience; maintain a, What you are doing, distance of at least 4–12 feet, rings so loudly in my, •, While using blackboard, raise your voice and look at, ears that I am unable, the audience in between, to hear what you are, speaking., • Avoid fiddling with key ring or tie while presenting, • Avoid looking outside even if there is some external, noise. Try to concentrate on your ideas and audience, Vocal elements, Our voice can serve as an important tool to support our, verbal message. How we sound is as important as how, we look or what we say. Our vocal elements, namely the, tone, pitch, rate, and volume, reflect our attitude about, , Ways to Improve Body Language, Try and videotape a part of your presentation., Play it back and identify one aspect of your body, language you want to improve. After making, conscious efforts for improvement, record this part, again and see if there is any improvement. You can, also practise in front of a mirror to improve on facial, , expressions. When you have worked through your, entire presentation, and feel sufficiently confident,, invite a friend to watch your performance. Ask, your friend for comments on aspects of your body, language that are good or that need improvement., , https://abdullahsurati.github.io/bscit
Page 138 :
https://abdullahsurati.github.io/bscit, , FORMAL PRESENTATIONS, , 131, , ourselves, our message, and our audience. Try the following tips to help you use your vocal, elements to enhance the impact of your presentation:, •, •, •, •, , Speak with enthusiasm and sincerity, Adjust the volume of your voice, Avoid monotones or vocalized pauses, Use your optimal pitch, , • Avoid fast delivery, • Use silence and pauses effectively, • Articulate each word clearly, , Visual elements, Our audience will remember facts easily if the ideas are connected to the right-brain stimulation., The way to stimulate the right side of the brain is to show pictures. Visual stimuli are more effective, than verbal stimuli. We often recall the colour of the cover of a book rather than its title and subtitle., Advantages, People find our message more interesting, grasp it more easily, and retain it longer when we, use visual support along with our words. Besides increasing the clarity of the message, visuals, make presentations more interesting. For example, investment brokers often use an array of, well-prepared charts, tables, models, and so on, to add variety to information that would be dull, without them., Graphics can also boost our image in ways that extend beyond the presentation. They add, a professional flavour to our presentation. Finally, our audience remembers a visual message, longer than the verbal message., , Tips for Effective Presentations and Speeches, •, •, •, •, •, •, •, •, •, •, •, , Be clear with your purpose., Know your audience., Keep enough time for preparation., Develop interest in the topic; know more about, it by reading books, newspapers, etc., listening, to and discussing with people., Collect adequate material and then select what, to present according to the purpose and time, given., Organize and make an outline with the main, points and sub-points., Structure your presentation into three parts:, beginning, middle, and end., Prepare the PowerPoint slides with care keeping, in mind the one minute, one slide rule., Keep animations to minimum., Prepare illustrations, such as graphs, maps,, drawings, tables, etc., accurately. Ensure that, they are visible to everybody in the audience., Familiarize yourself with the venue and the, available equipment., , • Arrive early and check the arrangements and, your PowerPoint slides., • Be excited about your presentation. Think all, positive qualities in you and feel confident., • On reaching the stage, look at the audience for a, few seconds before you start speaking., • See to it that your introduction goes smooth., You have won half the battle if this is done., • Use transitions effectively so as to provide a, smooth flow to your speech., • Give a feeling to your audience that you are not, dictating but sharing information., • Explain each slide adequately. Do not just flip, slides. Give time for the audience to grasp its, contents., • Maintain eye contact with all sections of your, audience., • Exhibit your enthusiasm, excitement, sincerity, and, interest through appropriate facial expressions., • Use well-timed gestures to substantiate your, points., , https://abdullahsurati.github.io/bscit, , (Contd)
Page 139 :
132, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , (Contd), • Adopt postures that reveal your confidence., Avoid monotonous postures. Do not move excessively., • If necessary you sit and present in front of a small, group., • If necessary distribute handouts (copy of your, slides or any other material) at the right time., , • If you sit and present in front of a small group,, adopt a straight posture on your chair and lean, forward while presenting. Do not sit in a relaxed, posture as it will reflect a casual attitude., • Listen to questions carefully and answer them, completely., , Refer to the Students’ Resource to learn how to handle questions and criticisms on your, presentation., , CONTROLLING NERVOUSNESS AND STAGE FRIGHT, Does the thought of speaking in front of an audience make you nervous? The symptoms of stage, fright are racing heart, sweating, dry mouth, shaky hands and legs, knocking knees, blinking, eyes, paining back, queasy stomach, and loss of memory. If your answer is ‘no’, you may be an, experienced speaker. If it is ‘yes’ then you should feel happy to know that you have thousands, and thousands of companions to share the same answer with you. You would also be glad to, know that even many seasoned speakers feel nervous when they need to present a complex, topic, to present before their superiors, etc. Hence, anxiety or nervousness is not a sin or a, bad quality. It is common for almost everybody. However, as nervousness, ‘All the great speakers were, leads to stage fright, which in turn may affect the presentation, we need, bad speakers at first.’, to know how to control them. The following discussion may be useful in, –Ralph Waldo Emerson, this regard., , Strategies for Reducing Stage Fright, Strategies in advance of presentation, •, •, •, •, •, , Develop an interest in the topic of your presentation., Reserve adequate time for preparation., Anticipate easy as well as hard questions and try to work out your answers., Practise your opening statement several times., Rehearse your entire presentation at least twice., , Strategies just before the presentation, • Arrive early; check the arrangements, equipment, and your PowerPoint slides., • If you see some participants, look at them, greet them, and talk to them so as to ensure, that you are not nervous while speaking and your voice is flowing freely., • Take a few sips of tepid water., • If you have time walk around or outside the venue., • Concentrate on your ideas., • Relax yourself by taking deep, even, and slow breaths., https://abdullahsurati.github.io/bscit
Page 140 :
https://abdullahsurati.github.io/bscit, , FORMAL PRESENTATIONS, , 133, , Strategies when the presentation begins, • Feel good about your presentation and walk up to the dais taking a few deep breaths., • Do not begin immediately or in a hurry. First look at the friendliest faces among your, audience and smile., • If your legs are shaky, lean on the lectern or table on the dais and hold it., • Remember that the audience may not realize your nervousness as much as you feel it., • Never comment on your nervousness during your presentation (some, ‘The best way to conquer, speakers say ‘I feel nervous, let me have some water please’)., stage fright is know what, •, Do not show explicit signals, such as clearing throat, drinking full glass, you are talking about.’, of water, wiping forehead, etc., which display your nervousness to the, –Michael Mescon, audience., , Visualization Strategies, Positive visualization is a proven technique to reduce nervousness or stage fright on any, occasion such as a presentation, an interview, a group discussion, etc. Try this: Visualize (you, need to imagine and see things or people in front of you; not just think) that you have prepared, very well and you are now standing in front of your audience. All the eyes are on you. Here you, can imagine your friends or other known people sitting in front of you. Visualize their smile,, clapping, etc. See in your mental image that many among them are appreciating and shaking, hands with you after the presentation is over; you are very happy and enjoy that day with your, friends in your favourite restaurant., While practicing this technique, initially you may only think and not visualize. But after, a few attempts, you will be able to visualize people and activities in front of you. The concept, behind this technique is ‘positive thinking’. Rather than thinking ‘My presentation is going to, be a failure as I do not have experience. All are going to mock at me …’, you should visualize, positive things such as success, commendations, happiness, etc., , On-camera Techniques, When your presentation is captured in a video format, you may have to follow certain guidelines:, , • If it is a presentation in front of an audience that is being video recorded, forget that, there is a camera in front of you., • Do not be conscious of the camera and behave naturally as you would do in front of your, audience with all the guidelines you have learnt., • Do not look into the camera, but you may not be able to avoid it if some people in the, audience are sitting in its vicinity., • If you know that your presentation is being video recorded, dress yourself in suitable, colours., • If you are delivering an impromptu speech for a television coverage (you must have, seen the reporters asking viewers to speak on certain occasions, such as cricket matches,, elections, etc.), do not look to be surprised. Listen to the reporter carefully and present, your views very briefly., , VISUAL AIDS IN PRESENTATIONS, Spoken words are temporary; as soon as they come out of our mouth they evaporate into the air., Because of this limitation, speeches often need strong visual support—handouts, chalk boards,, https://abdullahsurati.github.io/bscit
Page 141 :
134, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Importance of Visual Aids, • Increase audience interest, • Illustrate key points, • Signal transition from one part of the presentation to the next, • Increase impact of message, , • Help listeners retain information, • Help present ideas without depending on notes, • For those not familiar with our language, or accent, turn the incomprehensible into, something understandable, , flip chart, overheads, slides, computers, charts, tables, film, etc. If a picture is simple, clear, and, appropriate to its purpose and audience, it will deliver its message more accurately and quickly, than a verbal explanation. Ours is a visually-oriented society and an audience likes to hear as, well as see information., We should choose only those visual aids that suit the style and content of our presentations., We should use visual aids for any point that sounds vague and requires discussion in detail., However, they must be well designed and professionally generated. We should not use visual, aids as a verbal crutch for the speaker!, Table 7.3 provides some tips pertaining to the types of visual aids one may commonly use, in one’s presentations., TABLE 7.3 Types of visual aids used in presentations, , Type, , Tips, , Overhead transparencies, , •, •, •, •, •, •, , PowerPoint presentations, , Blackboard or whiteboard, , •, •, •, •, •, •, •, •, •, •, •, •, •, •, , Use larger fonts. Avoid decorative fonts., Separate the transparencies using sheets of paper., Keep transparencies uncluttered., Show only the required information., Do not add multiple colours or exciting backdrops to your slides., Use pointer on the screen, or your pencil or pen on the transparency to, draw audience’s attention to a specific item., Familiarize yourself with the operation of the overhead projector., Be ready with your notes in case of power failures., Check the computer system/equipment before loading., Familiarize yourself with the operation of the slides., Transfer your file to the hard disk., Be familiar with the operation of slide show., Rehearse your presentation., Keep a printed copy of the slides (6 slides on a sheet of paper) for use in, case of computer malfunction., Clean the board well before starting and check the condition of markers., Write in large letters., Stand to the side as you write., Do not face the board while talking to the audience., Divide the board into columns and write legibly., Keep contents which you may want to refer to again., , https://abdullahsurati.github.io/bscit, , (Contd)
Page 142 :
https://abdullahsurati.github.io/bscit, , TABLE 7.3, , FORMAL PRESENTATIONS, , 135, , (Contd), , Type, , Tips, , Flip charts, , •, •, •, •, •, , Use different coloured markers., Keep two pads of paper., Write in large letters., Use only one side of the chart., Wait for the audience to grasp the contents before turning pages., , We should be judicious in our choice of aids. If we are going to deliver a lecture to illiterate, people, we should not use tables or complex graphs; instead we can use aids that they can, understand. For instance, if we are talking about the function of the heart, we need to show them, some pictures, name all the parts, use a pointer to make it clear to them, ‘When speakers use a lot, about which part of heart we are discussing. If we wish to use visual aids of, of numbers, the audience, other organizations rather than our own, we should confirm beforehand, almost always slumbers.’, the availability of those aids that we need. Refer to Chapter 1 for details, –Charles Osgood, on the various kinds of visual aids that can be used with presentations., , Guidelines to Make Effective Use of Visual Aids, • If you feel that the audience needs explanation, for your aids explain to them lest they should, misunderstand it., • Organize the visual aids as a part of the, presentation. Fit them into the plan., • Emphasize the visual aids. Point to them with, bodily action and with words., • Talk to the audience, not to the visual aids. Look, at the visual aids only when the audience should, look at them., • Avoid blocking the listener’s view of the visual, aids. Make sure that lecterns, pillars, charts, and, such things do not block anyone’s view., • Refrain from removing the aid before the audience has an opportunity to absorb the material., • Do not talk about the visual aid after you have, put it aside., , • Use enough visual aids to make your points, clear, but donot overdo it., • Do not use too many lines or figures on one aid;, make sure that it is visible to one and all from all, the corners of room., • It should not be very light that the audience, finds it hard to see. Too small an illustration will, not be visible to those sitting at the back., • Keep them at an inconspicuous place if aids are, too many, or else they may distract the attention, of the audience., • Be familiar with the basic operations of the electronic devices that would be in use for presentations., , APPLICATION OF MS POWERPOINT, Microsoft PowerPoint (PP) slides have become the standard for visuals in almost all professional, presentations. Although we can use note cards (15 cm × 8 cm) or (overhead projector) (OHP), transparencies for our presentations, MS PowerPoint is the most widely used presentation, software across the globe, as the slides are easy to prepare, animate, and add effects to. The, result is eye catching and impressive presentations fit for any occasion. However, in addition to, creating PP slides, it is also essential that we spend adequate time in rehearsing the presentation., https://abdullahsurati.github.io/bscit
Page 143 :
136, , TECHNICAL COMMUNICATION, , ‘I hear, I forget, I see, I remember, I do, I learn.’, –Benjamin Franklin, , https://abdullahsurati.github.io/bscit, , In order to make our PowerPoint presentations effective, we should, follow certain guidelines. Applying the guidelines given in the following, section carefully will help us prepare and practise for an effective, presentation., , Slide Preparation, Preparing the PowerPoint slides comes just before rehearsal. We should be ready with our, material for the introduction, main body, and conclusion as well as the outline of our presentation., , Design, layout, and colour, The design and layout should be selected keeping in mind the occasion and purpose of the, presentation. There are several designs and layouts that we can choose from (see sample slides, given in the CD). While choosing the colour scheme in the design, we should keep in mind the, lighting in the presentation venue. If we are going to keep the lights on (or a venue with plenty, of light), then we should choose light background and dark fonts as shown in Slide 4 (see CD)., On the contrary, if we are presenting in a dark setting, a dark background with light colour fonts, as in Slide 1 or 2 (see CD) should be used. The important point is to keep the font colour that, contrasts the background colour., For layout, the topic slide can be prepared like Slide 1. When organizing the main content,, the layout depends on the format of the content itself. If it has to be presented in columns, we, can select one as in Slide 2. If we have to show a diagram or chart, we can choose a layout as, in Slide 3 (see CD). If the text is in the form of points, we can go with the layout of Slide 4., When we want to instert a picture or photograph, we could choose a layout as shown in Slide, 5 (see CD). We should always select a design template that is clear and that does not detract, from our presentation., Font, The same set of fonts should be used for all the slides of a presentation. For instance, if you, use complementary fonts Arial Black (for headings) and Arial (for text), use them for your, entire presentation. Although serif fonts (having small hooks at the edges), such as Times New, Roman, Garamond, Cambria, New York, etc., are said to be easily readable even from a distance,, you can choose sans serif fonts (without hooks at the edges) such as Arial, Gill Sans, etc., Serif fonts: Communication (Times), Communication (Cambria), Sans serif fonts: Communication (Arial), Communication (Calibri), Irrespective of the font we are using, the text must be readable even by the last row of our, audience. A font size of 24 and above should be used. The size should be chosen keeping in, mind the amount of text we have to accommodate on a slide. If the title of the presentation is, in font size 32, then font size 30 or 28 should be used for the headings and main text in other, slides., Number of slides, Remember the rule ‘one minute one slide’, but do not be rigid. While this rule will help us in, deciding the approximate number of slides we need to prepare, we may vary as per the expected, interaction from our audience. We may also adjust our time by explaining one slide for 30, seconds while explaining another for 90 seconds. The only thing we need to ensure is that we, https://abdullahsurati.github.io/bscit
Page 144 :
https://abdullahsurati.github.io/bscit, , FORMAL PRESENTATIONS, , 137, , will be able to explain all the slides clearly. There is no point in including a slide just to flip it, without discussing the contents., , Illustrations, If we use graphs, maps, drawings, diagrams, photographs, pictures, etc., their clarity should be, ensured while using them in our slide show. Instead of using pictures only from the Clip Arts, inbuilt with PowerPoint, we can use photographs taken by us so as to bring in some freshness., Look at the two slides given below. Slide 6 (see CD) contains a clip art which many people, might have seen, whereas Slide 7 (see CD) contains a photograph clicked at a programme,, which may be new and interesting for the audience., Video or audio clips, Many a time we may want to start our presentation with a video clipping. For instance, if you, wish to present on ‘Animations’ you may like to begin with a short video clip from an animation, film. We can do this without using a video or DVD player. However, it should be ensured that, the computer or the laptop we use for our presentation contains the hardware such as the sound, card, speakers, etc., so that the sound is audible. Likewise, we can use only an audio file as well., Refer to the following link for further details:, http://office.microsoft.com/en-us/powerpoint/HA011593121033.aspx, Spacing in the slides, The slides should never look cluttered. Enough white/empty space should be left in the slides, so as to enable easy reading and also to avoid straining the audience’s eyes. Seven or eight lines, of text containing six or seven words each in font size 28 should be readable. But at least 1 cm, space should be left on all slides within the frame. You may find the following links useful in, preparing your PowerPoint slides:, http://www.garrreynolds.com/Presentation/slides.html#Top, http://trainingpd.suite101.com/article.cfm/how-to-create-and-present-a-great-powerpoint-presentation, http://www.iasted.org/conferences/formatting/presentations-tips.ppt, http://presentationsoft.about.com/od/classrooms/tp/student_tips.htm, , Slide Show Animations, Animation in PowerPoint is a set of effects applied to the text or objects to animate them, during the ‘slide show’ of our presentation. These include making the text or objects fly in, fade, out, bounce, zoom out, etc. The animation also includes slide transitions, which refers to the, manner in which a slide gives way to the next. For example, the first slide fades or dissolved, into the second., Most young presenters love to use animations and transitions in their slide show. But these, should be kept to a minimum so that they are not the centre of attraction of the presentation,, sidelining the speaker or the content. We can use various animation effects such as flip, fade,, wipe, dissolve, fly, etc. We can make our text lines appear one by one, all at once, fading one line, as soon as the other line appears, etc. Likewise, we can use transition to select the speed of our, slide show—slow, medium, fast; sounds can also be used. However, the effects should be subtle, and elegant, not irritating or distracting., https://abdullahsurati.github.io/bscit
Page 145 :
138, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Use the following links to learn and practise the animation schemes and use them judiciously, in your presentations:, http://office.microsoft.com/en-us/powerpoint/CH100673441033.aspx (animation effects), http://office.microsoft.com/en-us/powerpoint/HA101077711033.aspx (transition effects), http://office.microsoft.com/en-us/powerpoint/ha010451151033.aspx (timing animation sequences), Also refer to the PowerPoint presentations given in the CD., Refer to Rehearsing Presentations in the Students’ Resource., Refer to the CD for the following:, Sample 1: Detailed outline for a speech on computer-mediated communication, Sample 2: A professional presentation on Internet search engines demystified, , Practice 1, Prepare the text of your speech with the outline given in Sample 1 in the CD., , Practice 2, Practise and deliver the presentation in Sample 2 in the CD to your friends. Seek their comments., , SUMMARY, Professional presentations and speeches enable, us to inform, persuade, or entertain our audience,, and thus form an integral part of our academic or, professional career. Hence, we need to understand, the fundamentals of such forms of communication, and aim for their effectiveness., Planning and preparation, structuring, delivery,, use of language, body language, voice, visual aids,, and rehearsals are the key drivers for the success, of a presentation. While planning, we must be, aware of the occasion, audience, and purpose for, the presentation. Thereafter, we need to work, on the thesis statement, which is the central idea, of the presentation. After this we start collecting, appropriate main and supporting material to, prepare the presentation., Any communication consists of an introduction, a main body, and a conclusion. Likewise, when, , outlining presentations, we must ensure that these, three elements are in place, and are performing, their functions effectively., Once, the presentation material is in place,, we have to understand the nuances of effective, delivery, which includes the mode and manner of, presentation. These would involve paying attention, to verbal, non-verbal, vocal, and visual elements, during the presentation. Our aim should be to keep, all these threads intact, neither too loose nor too, tight. An important aspect to take care of is selfconfidence while presenting publicly. We should, strive to overcome stage fright and nervousness, while presenting. Oral presentation is an art that, requires careful planning, preparation, and a great, deal of practice. This tool is both valuable and, relevant. With care and practice, we can achieve, wonders with our oral presentations., , EXERCISES, 1. How important is it to have good presentation, skills?, , 2. What are the five important aspects to be considered while planning for your presentation?, , https://abdullahsurati.github.io/bscit
Page 146 :
https://abdullahsurati.github.io/bscit, , 3. Discuss the contents of an introduction to a, speech., 4. What are the ways in which you can develop your, presentation contents?, 5. How can you overcome stage fright during a, presentation?, 6. Do you agree that language plays an important, role in presentations? Justify your answer., 7. ‘Voice quality impacts your business presentation.’ Discuss this statement with suitable examples., 8. You are heading the sponsorship and marketing, team of the annual technical festival ‘Quark’ in, your college. You want to project the best image, of your festival in order to get enough sponsorship for various events. You decide on a 15-minute, presentation that can be captured as a video and, uploaded on your website. Now prepare a full, text of your presentation, which should contain a, catchy introduction, organized main body, and an, emphatic conclusion., 9. Prepare a set of 15 PowerPoint slides for professional presentations on each of the following topics:, (a) Recent trends in animation, (b) Use of technology for effective communication, (c) Significance of time management, (d) Web advertising, 10. Recall any presentation made in your class by one, of your fellow classmates. Examine the non-, , FORMAL PRESENTATIONS, , 139, , verbal signals/cues sent by him/her. How do the, speaker’s gestures, facial expressions, eye contact,, and posture contribute to the message? Do these, non-verbal signals detract from your confidence, in the speaker? Do you detect any signs of nervousness? Is there any aspect of his/her delivery, that you think this speaker should work on to improve? Explain., 11. Write an outline and a catchy introduction to, the following presentation topics and tabulate, the elements attention getter, topic and thesis, statement, credibility statement, preview, rules, for Q&A session, and transition:, (a) Sleep disorders, (b) Special economic zones, (c) The power of mass media, (d) Interdisciplinary sciences, 12. Think and write down an analogy to explain each, of the following ideas:, (a) A car smashed in from the front and from, behind, (b) All the campuses of the university working in, consonance, (c) A humid 40-degree in April, (d) An aircraft gliding from the sky, (e) Hira Singh was an extremely large man, who, at 6 feet 5 inches and 260 pounds made his, second-grade students look extremely small, (f) The stock market was up one day, down the, next and then up again the day after that, , https://abdullahsurati.github.io/bscit
Page 147 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 8, , OBJECTIVES, You should study the, chapter to know, , • the importance of interviews, as a psychological tool, , • the various objectives, types,, and modes of interviews, , • the factors responsible for, failure at interviews, , • how to prepare for and, , participate in job interviews, successfully, • about the various types of, résumés and how to design, them, • what media interviews and, press conferences are and, how to handle them, , Interviews, , INTRODUCTION, An interview is a psychological and sociological instrument. It is an, interaction between two or more persons for a specific purpose, in, which the interviewer asks the interviewee specific questions in order, to assess his/her suitability for recruitment, admission, or promotion. It, can also be a meeting in which a journalist asks somebody questions to, determine their opinions. It is a systematized method of contact with, a person to know his/her views and is regarded as the most important, method of data collection. In addition, interviewing a person gives an, idea of how effectively the person can perform a particular task., We may have to face interviews at different times in our life. If, we consider an interview just as an interaction between two or more, people, we may not feel nervous to face the panel members of an, interview. However, the thought ‘I am being observed and assessed by, each member’ often makes one nervous., Although the nature of interviews may be different for different, organizations, several rules are common for all. For example, for any, job interview, one needs to prepare or update one’s résumé, know, the profile of the company, prepare answers for commonly asked, questions, etc. This chapter throws light on how you can achieve, success by adopting certain strategies before, during, and after an, interview, especially a job interview., , OBJECTIVES OF INTERVIEWS, Interviews may be conducted for various reasons. Generally, interviews, are conducted to achieve some of the following objectives:, • To select a person for a specific task, • To monitor performance, • To collect information, • To exchange information, • To counsel, https://abdullahsurati.github.io/bscit
Page 148 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 141, , TYPES OF INTERVIEWS, Depending on the objective and nature, interviews can be categorized into the following types:, •, •, •, •, •, , Job, Persuasive, Evaluation, Conflict resolution, Termination, , •, •, •, •, •, , Information, Exit, Counselling, Disciplinary, Media, , Each of the above types has a slightly different approach. For example, in a job interview you, may have to convince the interviewer that you are the best person for the job, whereas in a, termination interview your employer may have to convince you that your services have been, terminated for reasons that are specific, accurate, and verifiable., Comparing the involvement and contribution of the interviewer and the interviewee, an, interview can be divided into three types: telling, telling and listening, and problem solving., Telling In a telling interview, the flow of communication is almost entirely one way—, downwards. It is used most effectively in a directing, time-constrained situation; but it can, cause hostility and defensive behaviour when the employee does not have the opportunity to, participate., Telling and listening In a telling and listening interview, more feedback from the subordinate, is allowed, but the interviewer still maintains control over the flow of communication., Problem-solving In a problem-solving interview the flow of communication is two-way., The bulk of communication is upwards, a genuine rapport is established, ideas are pooled, and, exchange facilitated., , Job interviews, In job interviews, the employer wants to learn about the applicant’s abilities and experiences,, and the candidate wants to learn about the position on offer and the organization. Both the, candidate and the employer hope to make a good impression and to establish rapport. In the, initial round, job interviews are usually formal and structured. But later, interviews may be, relatively spontaneous as the interviewer explores the candidate’s responses., Information interviews, The interviewer seeks facts that bear on a decision or contribute to basic understanding., Information flows mainly in one direction: one person asks a list of questions that must be, covered and listens to the answers supplied by the other person, e.g., doctor–patient, boss–, subordinate, etc., Persuasive interviews, One person tells another about a new idea, product, or service and explains why the other, should act on his/her recommendations. Persuasive interviews are often associated with, but are, certainly not limited to, selling. The persuader asks about the other person’s needs and shows, how the product or concept is able to meet those needs. Persuasive interviewers require skill in, drawing out and listening to others as well as the ability to impart suitable information, adapted, to the situation and the sensitivities of the interviewee., https://abdullahsurati.github.io/bscit
Page 149 :
142, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Exit interviews, In exit interviews, the interviewer tries to understand why the interviewee is leaving the, organization or transferring to another department or division. A departing employee can often, provide insight into whether the business and human resource is being handled efficiently, or whether there is a considerable scope for improvement. The interviewer tends to ask all, the questions while the interviewee provides answers. Encouraging the employee to focus on, events and processes rather than on personal gripes will elicit more useful information for the, organization., Evaluation interviews, A supervisor periodically gives an employee feedback on his/her performance. The supervisor, and the employee discuss progress towards predetermined standards or goals and evaluate, areas that require improvement. They may also discuss goals for the coming year, as well as the, employee’s long-term aspirations and general concerns., Counselling interviews, A supervisor talks with an employee about personal problems that are interfering with work, performance. The interviewer is concerned with the welfare of both the employee and the, organization. The goal is to establish the facts, convey the company’s concern, and steer the, person towards a source of help. Only a trained professional should offer advice on problems, such as substance abuse, marital tension, and financial trouble., Conflict-resolution interviews, In conflict-resolution interviews, two competing people or groups of people with opposing, points of view, such as Smith versus Jones, day shift versus night shift, General Motors versus, the United Auto Workers, explore their problems and attitudes. The goal is to bring the two, parties closer together, cause adjustments in perceptions and attitudes, and create a more, productive climate., Disciplinary interviews, In disciplinary interviews, a supervisor tries to correct the behaviour of an employee who has, ignored the organization’s rules and regulations. The interviewer tries to get the employee to, see the reason for the rules and to agree to comply. The interviewer also reviews the facts, and explores the person’s attitude. Because of the emotional reaction that is likely, neutral, observations are more effective than critical comments., Termination interviews, A supervisor informs an employee of the reasons for the termination of the latter’s job. The, interviewer tries to avoid involving the company in legal action and tries to maintain a positive, relationship with the employee. To accomplish these goals, the interviewer gives reasons that, are specific, accurate, and verifiable., Media interviews, Most of us might have watched programmes such as Walk the Talk, Meet the Entrepreneur, etc.,, as well as press conferences organized by the government/businesses/industries on television., https://abdullahsurati.github.io/bscit
Page 150 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 143, , Many a time, reporters call up over the phone the head of an educational institution, an, important person in the government, or the chief executive officer (CEO) of a company to ask, about their success stories or their alarming anomalies. We might have watched the interview, given by Mr Ratan Tata, Chairman of Tata Group, during the release of Tata Nano or the one, given by Mr Shashi Tharoor, the former Minister of State for External Affairs, during the IPL, Kochi Franchisee controversy. All these are media interviews, which are generally conducted, to disseminate information to the public on the lifestyle and achievements of an individual/, business or on the new policies introduced by the government. When there is an emergency,, such as a terrorist attack, internal disturbances, etc., the media conducts interviews with the, people in power and also with the experts in order to get their views, interpretations, and more, information on the steps taken by the government. At times, we may give some news and the, media may interview us over the phone to confirm some part of the message or to get more, information on some issue. Thus, media interviews can help viewers to get quick updates on, the issue., In our professions, we may come across most of the types of interviews mentioned above., However, in this chapter, we will focus mainly on job interviews and résumés, and later on, provide some tips for taking control in media interviews and press conferences. In the following, section, we will discuss the various aspects of job interviews such as employer’s expectations,, certain critical success and failure factors, preparation, process, follow-up, and guidelines., , JOB INTERVIEWS, Job interviews can be classified into four major categories as depicted in Figure. 8.1., , Campus interviews, Campus interviews are the interviews conducted at the campuses of colleges. The companies, inform the students well in advance through the placement department of the college that, they would be visiting their campus to select students for jobs. Once the companies arrive at, the campus they would deliver a presentation (known as Pre-placement Talk) to the interested, students about themselves, the type of projects they carry out, the selection mode (aptitude test/, group task/case study/technical interview/HR interview),, etc., and also answer the students’ queries if any. As a, company has to conduct several rounds of interview in a, Campus, limited time, it may be able to spend only a little time with, students. Hence, these interviews will be brief and to the, point., Videoconference, , Job, interviews, , On site, , Telephone, , FIGURE 8.1 Categories of job interview, , On-site interviews, On-site interviews are the interviews conducted at, company premises. Many companies shortlist candidates, after going through their résumés or talking to them, over phone and call them to the company for a face-toface interview (services such as www.placementindia., com, www.monsterindia.com, www.naukri.com, and www., bestjobsinindia.in give information about the job openings, in various industries and forward the candidates’ résumés, to the companies). At times, shortlisted candidates of the, , https://abdullahsurati.github.io/bscit
Page 151 :
144, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , campus interview may also be called for a final interview at their office. As the interviewers, have more time on hand in this type of interview, they may be able to spend more time with, each candidate. Hence, this type of interview may be more detailed than the campus interviews., , Telephonic interviews, Telephonic interviews are the interviews conducted by the companies over the telephone. This, type of interview may be used for shortlisting the candidates by talking to them and verifying, the details of the résumés that they have submitted. The interviewing company informs the, candidates well before, seeks their convenience, and sends an email to confirm the date and, time of the interview. Generally, a telephonic interview will be shorter than the face-to-face, interview and may not be the final interview for selecting the candidates., Videoconferencing interview, With hiring becoming increasingly global, many companies especially multinationals conduct, videoconferencing interviews to select candidates for jobs. Generally when hiring for senior, positions from countries across the world, companies may use this mode of interviewing., Nevertheless, it can be used for recruiting within the same country as well. If the interviewers, inform the candidates about the videoconferencing facility they have arranged in the candidates’, institute or campus, they can use such facility. Otherwise, the candidates need to go to a nearby, agency that provides videoconferencing facilities. In either case, they will attend the interview, in a professional setting as they do in an in-person interview., , Stages of Interview*, Appraisal of résumé Some companies may shortlist candidates on the basis of projects they, have completed, specific courses they have done, internships they have taken up, etc., Tests Companies conduct aptitude tests (written/online) comprising sections such as, technical, quantitative, verbal, reasoning, psychometric, etc., Group discussions Most recruiters use this as the second stage after the aptitude tests. Some, companies may conduct group activities as well to assess the candidates’ personality, leadership, skills, knowledge, communication skills, etc., Presentations A few companies may ask the candidates to present themselves in two or three, minutes in order to shortlist., Face-to-face interview This may be the final round of an interview. Many companies these, days give the candidate a short or long case containing a hypothetical problem in the business/, industrial context, ask the candidate to present the case, and suggest a few alternative solutions, in a limited time., Videoconferencing interview This could be a technical-cum-HR interview., Negotiations This stage comes after the candidate has been selected. The company makes, a job offer out to the candidate after discussing the candidate’s expectations about salary and, other benefits., *, , Please note that all these stages are not mandatory. Companies may choose according to their practice., https://abdullahsurati.github.io/bscit
Page 152 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 145, , Medical test Once the job offer is confirmed, the candidates may be asked to go for a medical, examination. This is done by the companies that offer the benefit of medical claims. Since the, amount that can be claimed is substantial, the company ensures that the candidate is suffering, from a major ailment. This is also done to ensure that the candidate is not suffering from any, condition that would prohibit him/her from performing the duties required of him/her., , Face-to-face Interviews: Campus and On Site, A face-to-face interview for any job is a personal communication between the interview panel, and the interviewee. It gives adequate scope for both the parties to know about each other, and to get immediate feedback during the various stages of the interview. As this is the most, commonly used form of interview, let us discuss how one can give a face-to-face interview, whether it is conducted on campus or at the company site., , Skills and attributes most employers look for, The following is a list of the skills and attributes most employers look for in prospective, employees., Technical skills: The candidate’s subject knowledge suitable for the post he/she has applied for., For example, for a ‘programmer-analyst trainee’ the company may look for the candidate’s ability, to plan, develop, test, and document computer programs, and apply knowledge of computer, techniques and systems. Interview Situation 4 in the CD demonstrates the importance of indepth subject knowledge., Analytical skills: The candidate’s ability to examine and assess a situation, look at it from, different perspectives, improve upon, and streamline it. For example, there may be a complex, process that one may be asked to analyse critically., Career objective: The candidate’s goals and aspirations—what the candidate wants to pursue, in his/her life and whether he/she is clear about it, whether the candidate’s background and, aptitude matches his/her career objectives., Mental agility: The candidate’s ability to quickly grasp things/mental alertness., Communication skills: The candidate’s skills in listening, speaking, reading, and writing., Interpersonal skills: The candidate’s skills to build relationships with colleagues, seniors, and, subordinates, and ability to move with team members., Flexibility/adaptability: The candidate’s multi tasking skills or ability to adapt himself/herself to, the changing situations or environment and handle multiple concurrent projects. The candidate’s, ability to adapt himself/herself to culturally diverse work environment., Management/leadership skills: The candidate’s ability to plan, organize, motivate, inspire,, manage, and lead the colleagues to achieve the organizational goal., Creativity: The candidate’s out-of-the-box thinking and ability to innovate. For example, if, others suggest imposing fine for an employee for violating a rule and you suggest appointing him, as the guardian of rules, and justify your solution, you are creative., Positive/can-do attitude: The candidate’s positive way of looking at things and people. For, example, if one thinks of and projects good aspects of one’s college/organization/parents/, employers/job, one has a positive attitude., Social skills: The demeanour in public or with strangers/employers or how a person conducts, himself/herself with others—the way one meets and greets others, stands, sits or moves in front, of others, shakes hands, reacts to opinions, eats or drinks, etc., https://abdullahsurati.github.io/bscit
Page 153 :
146, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Honesty and integrity: The candidate’s candidness and trustworthiness, Determination/steadfastness: The candidate’s ability to accomplish the, given assignment despite several odds., Professionalism: The candidate’s maturity and fairness in handling, business activities, Inclination for learning: The candidate’s willingness to learn with an open mind, , Your attitude, not your, aptitude, will determine, your altitude., , Factors responsible for failure, There may be many reasons for failure in an interview. The following are ten common reasons, for a candidate being rejected and some tips for handling them:, Arrogance It refers to overconfidence. If you exhibit overconfidence the panel may take you, as arrogant. Avoid interrupting even before the interviewer completes his/her question. Do not, display a facial expression that conveys, ‘Why this silly question? I know the answer. It is very, simple’. Do not lean on the back of your chair all the time airing arrogance., Apathy It refers to lack of enthusiasm or interest. Avoid frozen or nil expression on your face., A smile on your face, eye contact, confident posture, timely gestures, etc., may convey that you, are enjoying the interview and that you have really come for an important occasion in your life., Uninhibited nervousness It refers to explicit nervousness. Though nervousness is common, during an interview, you should try to control it rather than showcasing it through your clammy, hands, dry lips, sweaty forehead, shaky hands or legs, If you are nervous, avoid keep clearing, your throat/placing your hands on the table/wiping your forehead with tissue/handkerchief. Try, to place your hands on the armrests of the chair and tell within yourself, ‘I am fine/all is well’, and look confidently at the interviewers., Equivocation It refers to evasion or beating around the bush. When you do not know the answer, to a question even after spending a few minutes on thinking, tell the interviewer politely, ‘Sorry, I, am unable to recall the correct point. However, can I make a guess?’ Similarly, when you are unable, to understand a question correctly get it clarified either by asking, ‘Excuse me sir, could you please, repeat the question?’ or paraphrasing in your own words rather than answering incorrectly., Lack of concentration It refers to inadequate focus because of poor listening, wandering mind or, apathy. The panel gets an idea of this quality when you give irrelevant answers or look elsewhere, when the panel speaks to you. Remember to listen attentively exhibiting non-verbal cues and, maintain eye contact. Listen completely and then answer., Lack of crispness It refers to lack of precision, conciseness, and clarity in your communication., Time is precious for everybody, and hence keep in mind that the interview panel is busy with, many interviewees like you. If you are well-prepared you can be focused and clear in your, answers. Avoid being verbose and sounding artificial. Preparing answers for certain anticipated, questions will enable you to be concise and clear., Lack of social skills It refers to using inappropriate/not following certain etiquettes during your, interview. Meet the interviewers with a firm handshake and a warm smile. If some snack or, beverage is offered to you during interview, either refuse politely or take it exhibiting appropriate, table manners. Use polite expressions such as, ‘could you please…, sorry, pardon, excuse me,, thank you, etc.’ Thank the interviewers when you are offered a seat, speak softly but assertively,, https://abdullahsurati.github.io/bscit
Page 154 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 147, , thank the panel before leaving the room, use positive and powerful words and be excited about, your interview. Consider it as a learning experience., Lack of firmness It refers to lack of determination consistency/decisiveness. Do not keep on, changing the areas of your expertise. For instance, if you have mentioned in your objective that, you are specifically interested in computer programming, your answers should reflect the same., You cannot suddenly change your interest to some other unrelated area. Try to look into your, skills and knowledge while preparing for the interview. Know well what you want to become in, life and what your interest areas are., Inadequate quantitative/qualitative skills It refers to inability to justify your answers or, points of view. Keep ready some examples to prove your skills or personal qualities. If you keep, on speaking without adequate justification, the panel may not trust you., Unsuitable personality It refers to a personality that does not match the job requirements. For, instance, if you are appearing for a marketing manager’s position, you need to be an excellent, communicator. If you need to handle a lot of employees you need to be cordial, patient, and, a good listener. If your personality does not match the demands of the job you are applying, for, the panel may not be interested in selecting you. Hence, it is important to know the job, description well before you appear for the interview., , Preparing for interviews, The key to success in an interview is not one’s experience, grades, extracurricular activities, but, one’s attitude. To rise above others with better experience, grades, or skills, a highly positive, work attitude is needed. The way most employers differentiate among candidates at the entry, level is by the candidates’ attitude towards work. They look for those who have the ‘can-do’, attitude and are sincerely willing to put forth their very best effort. In the following paragraphs,, we will touch upon the various aspects of preparing for interviews., Preparation of résumé A résumé is a written record of a candidate’s education, and past and, present occupation, prepared when applying for a job. This document enables the employer, to judge the candidate’s potential fit for the post. The résumé should be modified as per the, requirements of the job and the organization. We will discuss how to prepare a job-winning, résumé later in this chapter., Personal attributes One needs to analyse one’s own hard and soft skills, strengths,, weaknesses, attitude, likes, and dislikes. At least two unique strengths and weaknesses must be, distinguished. For example, if you think of your hard work and commitment as your strengths,, many candidates may have this. On the other hand, your passion for a particular job, your strong, foothold in certain areas of study and research, etc., may differ from others. Likewise, being very, sensitive or short tempered may be a weakness common with many candidates, whereas taking, many responsibilities at one time and struggling with the same need not necessarily be. Hence,, analyse yourself carefully and note down your important strengths and weaknesses. Think, whether you look at things in a positive perspective or negative perspective. If you have a, negative attitude, try to change yourself. Knowing yourself or introspecting your qualities and, skills is a very important step in the preparation of your job interviews. Interview Situation 8, https://abdullahsurati.github.io/bscit
Page 155 :
148, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , in the CD demonstrates a confident and convincing answer to the common interview question, of strengths and weaknesses., Mock interview A mock interview is more than just a chance to work out the interview, jitters. It is an opportunity to practise interviewing technique and answers live. It is also a, chance to hear constructive feedback from someone who can guide towards improving the, style and presentation during the real interview. Just one mock interview may bring about a, marked improvement in the interview skills. Ideally, the mock session should be videotaped,, and thereby one can have two opinions—the mock interviewer’s and one’s own. Go through at, least one mock interview. For maximum effectiveness, review your answers and then go through, a second mock interview. This will give you confidence in your first real interview., Knowing the prospective employer You need to know the company that you wish to apply/, have applied for. You can collect information about the following factors:, , • Divisions and subsidiaries, • Age of the company, • Locations/length of time there, • Services or products, • Size of organization, • Competitors within the industry—, • Sales/assets/earnings, both national and international, • Provision for career growth, • Growth pattern, • Ongoing projects, • Reputation/where it stands in the, • Mission, culture, and values, industry, You can collect the information through the company website, annual report, CD-ROMs,, brochures, columns/articles in newspapers and magazines, personal contacts, if any, in the, company, etc. The depth of information that is collected beforehand is far greater than that, provided in the pre-placement talks or at the interview., Awareness of job description The nature of the job should be understood thoroughly. You, can get an idea about the job profile from the company website. Also, you need to acquire a, clear idea about the subject knowledge and skills that the job demands and also the knowledge, of the type of activities you will be required to do. Such exercise will enable you to match the, requirements with what you have in hand. If necessary, you can seek clarification from the, person concerned at the company., Subject fundamentals You need to quickly go through the contents of basic courses done in, the college. The job description generally gives an idea about which subjects you need to refresh, in mind. Interviewers generally ask very basic questions (e.g., What is an array? What is the, difference between RAM and ROM?). Knowing your main subjects well before an interview, gives you immense confidence, which in turn leads to a better performance., Examples corroborating skills Besides testing the technical skills, the interviewers may also, assess the candidate’s team skills, decision-making ability, leadership skills, problem-solving, skills, etc. Hence, pick up at least four or five such examples that show the above-mentioned, qualities. Then prepare the narration of these examples using the STAR (situation, task, action,, and result) approach. The STAR approach provides the outline for the answers. Preparing, examples saves time and makes one feel more confident while answering behavioural questions., The STAR approach has been explained in the Students’ Resource., Appropriate dressing Campus fashions and work fashions are two different worlds. You, should be doing the talking, and not your clothes. Select conservative, good-quality clothes., https://abdullahsurati.github.io/bscit
Page 156 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 149, , Questions That You can Ask the Interviewer, • Whom will I report to?, • Whom will I be working with?, • What training opportunities are there?, , • What promotional prospects are there?, • When will you be making a final decision?, , They should be neat, clean, and ironed. Make sure your shoes are conservative, clean, and, polished. Arrange all your documents systematically in a neat folder and carry it with you., Questioning the employer Interviewers expect you to come in with a working knowledge of, the company as well as with a list of questions. When you have really done your homework you, may not be able to think of any questions because you already have the company’s history. Still,, make up some questions ahead of time to ask during the interview. They can be based on the, job that you are applying for or your prospects in that job., Memorizing your résumé Imagine the embarrassment if your interviewer asks you to, elaborate on the project which you have done during your course of study, and you fumble., For every item on your résumé, try to have a paragraph’s worth of information in addition to, what is already said; even better, try to think of a way in which each item illustrates one of your, particular strengths or weaknesses. If you are too nervous to remember everything, it is all right, to hold a copy of your résumé in your hand to jog your memory., Punctuality The waiting room is your initial face-to-face connection point with your, potential employer. Always arrive at least ten to fifteen minutes early. This will give you, the time necessary to do a quick mental review before the actual interview. Have a glass of, water to avoid the ‘cotton mouth’ syndrome. Check in with the secretary or administrator., Ask how long the interview is scheduled for, so that you have an idea of how much time, you will have., Relaxing the nerves By the time the interview day comes closer, you should be set. Get a, good night’s sleep, eat well, and take a relaxing walk beforehand. And remember, it is just a job, interview. If you do not get it, it is not the end of the world—take it as something better being, in store for you in the future., ‘What can you, do for us?’, , ‘If you ask me to do something,, I'll promise to do so; or at least, find an excuse for not being, able to do!’, , Knowing the possible types of interview, questions Interview questions may either, be open-ended or close-ended. While, open-ended questions allow one to give, more information, close-ended questions, restrict the responses to ‘yes’ and ‘no’. For, example:, Open-ended:How good a manager are you?, Close-ended:Are you a good manager?, There are basically six types of questions, you may face during an interview:, , https://abdullahsurati.github.io/bscit
Page 157 :
150, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , 1. Experience questions, , The main purpose of this type of question is to objectively measure the features of your, background., What is your C.G.P.A. (cumulative grade point average)?, How long were you at …?, , 2. Credential questions, , This type of question aims at subjectively evaluating the features of your background., What did you learn in your network programming class?, What were your responsibilities in that position?, , 3. Opinion questions, , This type aims at analysing subjectively how you would respond in a series of scenarios., What would you do in this situation?, , What are your strengths and weaknesses?, , 4. Questions requiring innovative answers, , These questions are asked to find out if you are capable of an original thought:, Can you sell this pen to me in one minute?, What kind of animal would you like to be?, , 5. Behavioural questions, , The purpose of this type of question is to anticipate future responses based upon your, past behaviour., Can you give me a specific example of how you did that?, , What were the steps you followed to accomplish that task?, , , Behavioural questions are gaining greater acceptance by the trained interviewers because, past performance is the most reliable indicator of future results., 6. Tough questions, , Good interviewers often ask difficult questions to establish the weaknesses as well as the, strengths of each candidate. They want to find out how you stand out from the other, candidates who possess almost the same skills as you. Look at your curriculum vitae, from the interviewer’s perspective. List out the gaps, weaknesses, and any problems you, can see. If you were the interviewer, what would you ask? Work out your answer to each, question., What can you do for us that someone else cannot?, What do you look for when you hire people?, , The interview process, In its simplest form, an interview consists of three distinct steps:, • Establishing rapport, • Closing, • Gathering information, • Using body language effectively, Understanding and successful completion of these basic steps are critical for one to reach the, next step in the process, whether that be another interview or the actual job offer., Establishing rapport The rapport-establishing step is where the vital first impressions are, formed. Some employers may claim to be able to make a decision about a candidate in thirty, seconds or less. The truth is that you set the tone for the interview through your physical, appearance and initial responses. When you enter the room, look around and establish eye, https://abdullahsurati.github.io/bscit
Page 158 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 151, , contact with the people there. Smile warmly and greet them. Shake hands with a firm grip, if, required, and sit when invited to do so. Address the panel members as ‘Sir/Madam’ or use their, surnames if you know correctly. Do not call them by their first names unless they insist you to, do so., Interviewers will analyse you in reference to the company culture. Further, your initial, responses will greatly affect how you are perceived in the eyes of the interviewer. It is not, necessarily the words you say, but how you say them. This is where your positive attitude and, confidence will establish the tone for the interview., Information gathering At this stage, the employers will ask questions and match your, answers against their expectations. Your honesty and sincerity in answering the questions, should be evident; remember that interviewers are experienced and can judge whether you are, speaking the truth or telling a lie. Most interviewers are keenly aware of when they are being, deceived or tricked. Questions in this step will usually be probing questions that drill deep into, your background, attempting to get past the interview veneer. In fact, this is the stage in which, you will need to consolidate the employer’s view. You will be judged on attitude, work ethics, (will you really work hard or are you just looking for an easy job?), intelligence, and honesty., Interview Situation 9 in the CD demonstrates undesirable and desirable answers to an ethicsbased question., Closing If your interview has been successful, there will usually be an indication of what is to, come next. You may be given further company information that is reserved only for the select, few. You may get a hint from the interviewer’s body language. No matter what your view of the, interview is up to this point, it is important to personally close the interview by establishing, continuity of the process. Ensure that you understand the next step and be prepared to follow, up from your side. Always pursue each interview as if it were your last., Using body language effectively Various aspects of body language, namely personal, appearance, facial expression, posture, gesture, eye contact and personal space—all need to, be used effectively during a job interview as they communicate your confidence, sincerity,, enthusiasm, interest, seriousness, social skills, etc., to the interview panel., Personal appearance Take care of your attire, accessories, and personal hygiene. Keep at least, two sets of neat, well-ironed formal attire (men: pants, shirt, tie, belt, shoes; women: pants and, full sleeved top/salwar suit/sari and blouse) specially for your interview. Clip your nails. Be well, groomed. Avoid gaudy colours, clunky jewellery, and excess perfume., Facial expressions Your face is an excellent tool to communicate your interest, sincerity, and enthusiasm about your interview to the panel members. Wear a smile on your face while, entering and meeting the interview panel and use appropriate expressions while answering the, questions. Even if you do not like some questions, try not to show your dislike on your face. Be, happy and sporting and answer the questions patiently., Posture Do not sit on the edge of the chair and do not lean on the chair either. Sit in a, straight posture in the beginning and after some time you can change the posture. Be natural, but at the same time try to control nervousness if you have any by resting your hands on the, arms of the chair., Gesture Use small gestures (e.g., if you wish to show two fingers to tell ‘I have two points’, keep the fingers close to you rather than stretching close to the panel ) while speaking as there, https://abdullahsurati.github.io/bscit
Page 159 :
152, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , will be little space between you and the panel. Exhibit suitable gestures, such as nodding head,, tilting head, shaking hands, etc., at appropriate times., Eye contact Maintain eye contact with all the panel members right from the time you meet, them till you leave the interview room. While answering a question, look first at the member, who posed the question and then at other members as well. Remember that if you do not look, at the panel, you may appear to be diffident. Eye contact will also help you in getting feedback, from time to time about how the panel members receive your answers, thereby enabling you to, change your approach., Personal space As you will be sitting just on the opposite side of the panel, the space between, you and the panel will be very less (a table may separate you and the panel). Hence, do not bend, too much or stretch your hands on the table., (Note: It will be helpful if you observe the interviewers’ body language when they ask, questions and also when you answer them. You can understand their intention and interest in, asking the question and also their reaction to your answers.), Interview Situation 1 in the CD demonstrates the importance of appropriate body language, in interviews., , Answering techniques, Behavioural answering technique, , • Talk about how you have done rather than how you would do., • Be prepared to use examples from your work, classes, and extracurricular activities., • Be ready to offer not just any example, but your own example., , Compelling story technique, , • Expand your answers by developing the specific examples into compelling stories with, personality, flair, and interest., • Captivate your interviewer by providing the details and nuances that bring your story to, life., • Do not, however, be tempted into lengthy monologues that will stretch the interviewer’s, time., , Personality matching/mirroring technique, , • Take your cue from the interviewer in terms of tone and approach. For instance, if the, interviewers are using minimal gestures or facial expressions, you can also follow the, same approach. If they speak in low tones, you can also do so. However, do not be too, casual, even if the interviewer seems to be. Watch and learn., • Bring under control the ‘too much’ area (too loud, too pushy, too confident, too egoistic,, too formal, or too conventional) in your own personality., , Parroting technique, , • Do not assume or make a ‘best guess’ of what the interviewer is looking for., • If a question is unclear to you, it is absolutely appropriate to ‘parrot back’ the question in, your own words to make sure you have understood the correct meaning., • Use it as a temporary stall when you do not have a ready answer. You will get some time, to think and answer., https://abdullahsurati.github.io/bscit
Page 160 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 153, , Reframing technique, , • Always attempt to answer the questions as straightforwardly as possible, initially., • Reframe the original question to illustrate an area of your background that can, further enhance your overall image. For example, if you are asked who your favourite, professor is, you might give a short answer about a particular professor, and then, reframe the question by explaining why that professor is your favourite—‘… in fact, it was her inspiration that encouraged me to participate in a two-week internship, over the winter break, where I combined my classroom knowledge with practical, experience in the field of …’ Thus, you can use this technique to your advantage in, the interview., , Abraham Lincoln technique Abraham Lincoln, while arguing in the court, would usually, argue both sides of the case to the jury. He would first take the opponent’s side of the issue and, then his client’s side., , Answering ‘Problem’ Questions, If you are asked an awkward question, you should, try to turn this into an advantage. Do not evade, the question or lie. Answer in a straightforward, manner, dealing briefly with the negative aspects, and move on, giving more time to detailing the, positive aspects of the situation. Compare these, two situations:, A Interviewer: Priya, you seem to have worked, for just six months at CompuSoft., Why?, Priya:, They were going through a, financial crunch and I was laid-off., Interviewer: Why?, Priya:, I just told you. They were …, Interviewer: No, no, I meant why did they lay, you off, and not someone else?, , B Interviewer: Deepti, you seem to have worked, for just six months at CompuSoft, before leaving. Why?, Deepti:, They were going through a, financial crunch and laid me, off. That gave me time to do a, course on web design which, came in most helpful in my next, assignment., Interviewer: Was that at Worldcom?, Deepti:, Yes., Interviewer: Tell me more about that., As you can see, Priya has painted herself in a bad, light, whereas Deepti has turned a negative point, into a positive one by emphasizing the new skill, she has acquired., , Some More Interview Tips, • Ask permission if you wish to take notes., • Remain calm if you sense prejudice or any, preconceived notion on the part of the, interviewer. Keeping yourself cool will keep the, situation from getting out of hand., • Turn off your cell phone. If it goes off accidentally,, apologize and turn it off., , • Respond to both verbal and non-verbal cues of, the interviewer., • Ask relevant questions. Avoid becoming familiar, or indulging in unnecessary chit-chat or gossip., , https://abdullahsurati.github.io/bscit
Page 161 :
154, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Point to your strengths instead of making excuses for shortcomings., • First speak well of others when the interviewer asks why you are lacking in a particular, area (be it grades, work experience, extracurricular activities, etc.) or how you are better, than others for a particular job., • Then establish your own strength in the specific area., , Refer to the Students’ Resource for details on the STAR approach. The Resource also lists, 50 standard interview questions as well as sample answers to some frequently asked questions., , Overcoming nervousness, The interview is your opportunity to be at your best. If you allow your nervousness to control, your presentation, that may be the dominant impression you have on the interviewer, blocking, out any other positive aspects you may present., Why do we get nervous? Because of fear of the unknown. In most cases, the fear of not, getting approval makes us nervous, which in turn makes it more difficult to gain that approval., Uncontrolled nervousness can destroy our ability to perform effectively in the interview., In the box given below, a simple technique is shown that you can apply to overcome, nervousness in any interviewing situation. This is known as Rowboat technique and will help, you overcome your fears and successfully meet with and speak to people you have never met, before in the interviewing situation., You will find your body completely relaxed. Even if you are not nervous, it is always a good, idea to use this technique when you are waiting to meet your interviewer. If you feel nervous, during the interview, you can still effectively apply this technique. Simply take in a deep, breath through your nose, and then contract your abdomen muscles in the ‘top-to-bottom roll’, discussed above, as you slowly exhale through slightly parted lips. Hold it at the bottom, take in, a deep breath, and you are ready to go. If you are overcome by nervousness while answering a, question, simply pause, take a deep breath, exhale and contract, and then continue., This technique is virtually unnoticeable to anyone nearby. Make it a habit to apply this, technique several times before going on stage or for an interview, whether you are feeling, nervous or not. The rationale behind this technique is that the muscle contractions prevent the, introduction of chemical imbalances into the body system that can cause nervousness. The deep, breathing helps to dissipate any chemicals that have already been released. It forces the body to, prepare physically for the upcoming task. The body begins to produce endorphins (hormones, , The Rowboat Technique, The Rowboat technique is a simple contraction, of the abdomen in combination with rhythmic, breathing that will allow you to fully overcome, your nervousness in any situation. The steps are as, follows:, • Sit forward in a chair, with your arms outstretched, as if you are grabbing oars in a rowboat., • Take a deep breath., • Slowly pull back your arms and contract the, abdomen muscles just below the rib cage., , • As you continue to let out air, roll the contraction, of the muscle downward, just above your pelvic, region, centering on your naval., • Keep your muscles tight until all the air has been, expelled., • Count to three (do not breathe in yet), and then, inhale deeply., • Repeat this two/three times., , https://abdullahsurati.github.io/bscit
Page 162 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 155, , that produce feelings of excitement), which will be needed for the anticipated rowing ahead. And,, this exercise will help your mind focus positively on the interview., Few interviewers may wish to check how good you are in handling stress during your, professional career. They may suddenly turn a smooth interview into a stress interview for you, by asking questions or passing on comments. For instance, even when you give a correct answer, they may say, ‘Are you sure? I feel something is wrong in your approach’ or they may ask, ’ I think, that you have done a very poor interview. What do you have to say on this?’ (in fact, one student, answered to this question like this: ‘I think you are good in cutting jokes! ’ and the employers, enjoyed that answer!). Some interviewers may pose a puzzle before you and ask you to solve or, ask you to tell a joke. Do not get nervous at all in these situations. Such questions or comments, are included to check your presence of mind, creativity, ability to handle stress, etc. They expect, you to be clear and consistent and not carried away by emotions or performance anxiety. You, can handle such questions if you keep the evaluation aspect aside and perform the interview, considering it as a learning opportunity. Interview Situation 6 in the CD shows four different, answers to the stress interview question ‘On a scale of one to ten, I rate you four. How do you, rate yourself?’ This technique can be used in a variety of circumstances in which we need to, focus our mind and body: overcoming anxiety, anger, fright, tension, nausea, etc., Attempt the static animation interview given in the CD. Answer the questions keeping, the preceding discussion in mind, so that you can assess the effectiveness with which you will, perform during an interview., , Intelligent listening at interviews, Assume that during your interview, you are speaking enthusiastically and your interviewer looks, at the ceiling of the room or looks at his/her watch. How do you feel? You may get a hint, that he/she is not interested in what you are saying. However, as an interviewee, you may not, have the privilege to ignore the interviewer like he/she has done. You need to be an active and, intelligent listener., We have already learnt the difference between active and passive listening. Active listening, consists of two parts: analysis of and response to the message communicated. In both these, activities, we need to use our intelligence, knowledge, and power of concentration. To become, an intelligent listener, we need to keep our eyes, ears, and mind open. The following guidelines, may help you become an intelligent listener at interviews:, • Listen to the questions with an open mind. Do not get upset when the interviewer, criticizes you., • Keep aside your personal agenda (during interview it may be to get the job) and minimize, your internal distractions such as thinking about something that happened on the way, at, home, etc., while listening., • Concentrate on the main issue emphasized in the question. For example, ‘Tell me a time, when you were under stress and the measures you had taken to control your stress.’ This, question is on stress and the strategies you have taken to do away with that stress., • Learn to read between the lines. While listening to the words, observe the interviewer’s, body language as well. At times what has been left unsaid may have more impact on you, than what is being said. For instance, when the interviewer comments, ‘Do you think, your answer is right? I don’t think so’, you may listen to these words, but at the same time, try to read him whether he is planning to trap you. If you are an intelligent listener you, may understand your interviewer’s intentions along with his words., https://abdullahsurati.github.io/bscit
Page 163 :
156, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Intelligent listeners show their interest and sincerity in listening by exhibiting body, signals. When your interviewers say something, you can nod, smile, lean forward, etc.,, to show that you are concentrating on what is being said. Listen not only with your ears, but also with your mind and body., • Listen patiently and completely for the whole message. Some interviewees do not allow, their interviewers to complete the question and interrupt bluntly, maybe because they, know the answer, and hence get very excited. You should never make such mistakes., Control your urge to respond when the interviewer is still speaking. In fact, you will be, appreciated and will be considered as a mature person when you react after listening, completely., • During your interview, there may be some distractions such as somebody entering the, room, a knock on the door, some noise outside, etc. Do not get perturbed by these, disturbances. Listen with concentration on what is asked and what is to be told., • When you implement intelligent listening, you may be able to ask good questions to the, interviewer. For instance, when he speaks more about ongoing projects in a specific area,, you can pose your question on projects; when he speaks more about career growth, you, can ask question relevant to that domain., • Show your curiosity while listening., • Manage your feelings and emotions while listening to the interviewers. Let them not, overrule you, thereby showing you in poor light., • Whenever necessary, check whether you have understood the question correctly by, paraphrasing (you can start with so, what you are asking is …) and seeking clarification., Watch the video clips on various interview situations in the CD to understand the effective, use of body language as well as other guidelines., , Follow-up, There are two simple steps you can take to make a lasting impression after your interview, which, greatly increase your chances of success., 1. Call the interviewers to thank them for their time. If possible, you may want to add, additional information which was not discussed in the interview. This phone call should, ideally take place the same day. If you are unable to reach the interviewer directly, leave, a voicemail message. But it is a good idea to assess the situation before the call., 2. Immediately write the interviewers a short note-mail, thanking them for their time, and restating your interest in the position. These simple gestures of a phone call and a, thank-you email can make a big difference in distinguishing you from your competitors., It has taken a great deal of effort to get this far. Take the extra time to make this final, impression a positive one., Go through the PowerPoint presentation given in the CD to get a comprehensive overview, about the types, preparation, and process of a job interview., , Telephonic Interviews, The telephone is a very useful communication tool; as a basic business instrument it has, proved to be very essential. Many people make the first contact over the phone, and this first, conversation can leave a lasting impression over them. A little tact and attention to what we say, and how we say it, we can use the phone as an effective tool in getting and keeping cooperation,, sales, and goodwill., https://abdullahsurati.github.io/bscit
Page 164 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , Tips for Face-to-face Interviews, •, •, •, •, •, •, •, •, •, •, •, •, •, •, •, •, •, •, , Be well prepared., Brush up your subject and general knowledge., Prepare, update, and memorize your résumé., Know yourself., Know about the company., Dress appropriately. Unless advised otherwise,, wear business attire. Limit make up, perfume/, aftershave, and jewellery., Be smart, clean, and well groomed., Carry a briefcase or neat folder containing all, relevant papers., Show up ten to fifteen minutes early. In case you, feel you may get delayed, call up and inform., When you meet your interviewer(s), shake hands, confidently., Stay calm, do not fidget or twiddle your thumb., Be polite., Never chew gum or smoke during the interview., Be yourself, be honest., Show a real interest in the job., Be aware of all the answering techniques., Do not answer a question you did not, understand; ask for clarification first., Speak clearly using positive words and phrases,, such as ‘enjoy’, ‘enthusiastic’, ‘positive attitude’,, , •, , •, •, •, •, •, •, , ‘excellence’, ‘striving to be my best’, ‘passionate’,, etc., Use the following appropriately: non-verbal, eye contact (shows interest and confidence),, facial expression (tells about your delight and, excitement), posture (reveals confidence and, power potential), gestures, space (shows your, respect to the interviewer and awareness about, the organizational culture)., In the end, restate your interest in the job., Smile and say ‘thank you’., Tell them how you look forward to seeing them, again., Shake hands firmly., Tell them how much you enjoyed the interview., When you leave an interview, you should leave, the building as gracefully as you entered it. You, should be as cordial to people on the way out as, you were while coming in. Then, as you return,, take time to review the interview while it is still, fresh in your mind because an interview is a, learning experience to help you in future., , Tips for Videoconferencing Interviews, If the interviewers want you to attend a videoconferencing interview, they will inform you well, in advance the date, time, and duration of the, interview., • Confirm the date and time of the interview, through email., • Send all the necessary documents well before, the interview., • Assume that you are attending an in-person, interview., • Wear a formal dress as you would do for an, in-person interview to give a professional, appearance., • Reach the venue early so that you get settled,, familiarize yourself with the equipment, and use, it with ease., , • Face the camera and speak a few words to, test the focus and your voice. Use the picturein-picture feature to see how you look on the, screen., • Do not clutter your table with papers. You, may keep your folder containing copies of, the relevant documents you had sent to the, interviewer., • Try not to be conscious of the camera in front of, you. Just concentrate on the questions and your, answers., • Listen very carefully. If there is any technical, problem, inform the interviewer and then seek, assistance from the agency that has provided, the facilities for the interview., , https://abdullahsurati.github.io/bscit, , 157
Page 165 :
158, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Many people do not take telephonic interviews as seriously as face-to-face interviews. A, telephonic interview is also an interview and not just a phone call, and hence it has to be treated, with all the importance given to a face-to-face interview., There are three types of telephonic interviews:, 1. You initiate a call to the hiring manager and he/she expresses express interest in your, background. The call from that point forward is an interview., , 2. A company calls you based upon a previous contact. You are likely to be unprepared for, the call, but it is still an interview., 3. You have a pre-set time with a company representative to speak further on phone., , Preparation, One can prepare for the first and third type of interview call mentioned above. In these cases, you, will have prior information regarding the date and time and possibly the duration as well of your, telephonic interview. The following points will help you be prepared for the call:, • Keep all your documents within easy reach of the phone so that you can refer to them., In this respect, you have a major advantage in a telephonic interview that does not exist, in a face-to-face interview., • Have a note pad and pen ready to take notes., • Keep a mirror nearby. Look into that mirror consistently throughout the phone call and, smile. You will improve your telephonic presence by using this simple technique. This, will help you sound friendlier, more interested, and more alert. If you feel self-conscious, about seeing yourself in the mirror, you can use the mirror as an occasional checkpoint., But for most of us, seeing our reflection gives us the kind of feedback necessary to make, instant modification towards a more positive presence., • Always stand up when you are talking with a potential employer on the phone. It gets, your blood flowing, improves your posture, and improves your response time. It helps, give an action perception to your telephone call., • Try to match your speaking rate and pitch with that of the interviewer’s. Remember to, stay within your personality range, but venture towards that portion of your range which, most closely matches that of your interviewer., • Place a ‘Do Not Disturb’ note on your door., • Turn off your stereo, television, and any other potential distraction., • Warm up your voice while waiting for the call. Sing an uplifting song to yourself., • If your phone interview is at a set time, make sure you answer nature’s call first., • Have a glass of water handy, since you will not have a chance to take a break during the call., Guidelines, Many interviewees feel that they can perform telephonic interviews better than face-to-face, interviews, as they can have the details in front of them. However, the most obvious (and often, most neglected) point to remember is this: during the interview, the interviewer has only ears, to judge you with, and that is something you must exploit. Here are some tips., Take a surprise call in your stride If you receive a call as a result of a mailed résumé or a, telephonic message you left, and you are unprepared, be calm. At times even the scheduled, telephonic interviews may not happen as per schedule. The company may call you ten or fifteen, minutes earlier or later than the specified time. Sound positive, friendly, and in control of your, https://abdullahsurati.github.io/bscit
Page 166 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 159, , thoughts and feelings; take control of the situation like this: ‘Thank you for calling, Pranay., Would you wait just a moment while I close the door?’ Put the phone down, take three deep, breaths to slow your heart down, pull out your résumé and a scratch pad to take notes on, put, a smile on your face, and pick up the phone again. Now you are in control of yourself and the, situation., Be enthusiastic During the start of the interview, when normal pleasantries are exchanged,, greet the interviewer enthusiastically. Make a conscious effort to infuse enthusiasm and pep, in your voice. Allow the company representative to do most of the talking. Keep up your end, of the conversation and be sure to ask a few questions of your own that will reveal you as an, intelligent person and provide you the opportunity to promote your candidacy. For example,, ask what immediate projects the interviewer’s department is involved in. When the interviewer, answers your question, you will either have a clear picture of how to sell yourself, or you will ask, a follow-up question for clarification. For example: ‘What specific skills and personality traits, do you think are necessary for a person to succeed with those challenges?’, Beware of giving yes/no answers Yes/no answers give no real information about your abilities., Also, try giving answers that give details about you to the interviewers so that he or she can ask, you more questions. Be factual in your answers. If a situation arises where you are forced to say,, ‘I do not know’, do so gracefully and try and cover up your shortcomings with your strengths, by saying, ‘I do not know, but I can study that and I am confident that given the opportunity, I, can master it in a short span of time.’ Do not try to hide your shortcomings, but every time you, acknowledge your shortcomings, do it in a positive manner., Speak directly into the telephone Keep the mouthpiece about one inch from your mouth., Do not smoke or eat while talking on the phone., Take notes Notes taken during a telephonic interview are invaluable. Towards the end, of the interview, you will get an opportunity where the interviewer will invite you to ask, questions, if any. You can make good use of your notes here. If, for any reason, the interview, is interrupted, jot down the topic under discussion. When he or she gets back on the line,, you can helpfully recap: ‘We were just discussing ...’. That will be appreciated and will set you, apart from the others., The interviewer may talk about the corporation. A little flattery goes a long way (but do not, overdo it): admire the company’s achievements and you are, in fact, admiring the interviewer., Likewise, if any areas of common interest arise, comment on them, and agree with the interviewer, when possible—people hire people like themselves. If the interviewer does not give you the, openings you need to sell yourself, be ready to salvage the situation and turn it to your advantage., The telephonic interview comes to an end when you are asked whether you have any questions., Ask any questions that will improve your understanding of the job requirements. If you have, not asked before, now is the time to establish what projects you would be working on in the first, six months: ‘It sounds like a very interesting opportunity, Pranay, and a situation where I could, definitely make a contribution. The project you just described sounds very exciting.’ Once the, details are confirmed, finish with this request: ‘If I need any additional information, can I get, back to you?’ The company representative will naturally agree. No matter how many questions, you get answered in the initial conversation, there will always be something you forgot. This, allows you to call again to satisfy any curiosity—it will also enable you to increase rapport. Do, not take too much advantage of it, though—one well-placed phone call that contains two or, three considered questions will be appreciated, four or five phone calls will not., https://abdullahsurati.github.io/bscit
Page 167 :
160, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , In a Nutshell, • Use your voice effectively to express your, genuineness., • Always greet the interviewer with enthusiasm., • Do not answer questions with one word. Try, to give details of your area of expertise. Keep, notes handy. If necessary, prepare a write-up on, your responsibilities and refer to it during the, interview to make sure that you do not forget, anything., • Do not use any words of your native language., • If you have not understood the question, ask the, interviewer politely to repeat/elaborate., • Avoid repeating yourself., • Do not raise your voice during the interview., • Exhibit appropriate non-verbal cues while, listening and speaking., , • Do not interrupt the interviewer while he/she is, talking., • When talking about your project, instead, of trying to sell the product or your present, company’s capabilities to him, explain how you, went about doing it and sell your capabilities to, him/her., • Even if the interviewer appears to be asking, trivial or irrelevant questions, take all of them, seriously. Maybe he/she is trying to check your, communication skills., • Do not ask the interviewer any personal, questions., • At the end of the interview, always thank the, interviewer for his/her time., , Let us now discuss the most important aspect of preparing for interviews—résumé., , RÉSUMÉS, Résumés are technical as well as marketing, documents that present the candidate’s past, and present performance to the prospective, employers so that they can assess his/, her future potential. In fact, a prospective, employer forms his or her first impression, of the candidate from the résumé. Of course, a good résumé is not sufficient to get a job;, but it can help the employer to shortlist the, candidates to be considered. Employers, usually have more applications than they can, handle, and hence, they naturally look for, ways of narrowing down the candidates to a, manageable number. An effective résumé will, ‘Let’s hire this lady right away. Wait! This is my Résumé.’, put the candidate into that shortlist., A cover letter is an essential accompaniment to résumés. Chapter 15 discusses covering, letters in detail., , Résumé, Biodata, and Curriculum Vitae, Although the terms résumé, biodata, and curriculum vitae (CV) are synonymously used, they, differ from each other in certain aspects. In French, résumé means summary. It is usually, one page long, but may extend to two pages sometimes. It includes the gist of an individual’s, education, past employment, and skills for the new position. The features of a résumé include, the following:, https://abdullahsurati.github.io/bscit
Page 168 :
https://abdullahsurati.github.io/bscit, , •, •, •, •, , Written in points, Objective and formal in approach, Written in third person, Name and address of the applicant, , •, •, •, •, , INTERVIEWS, , 161, , Summary of educational qualification, Employment history, Professional affiliation, Skill sets, , A résumé is suited for any position in an organization. Personal information such as age,, date of birth, marital status, nationality, and gender are generally not included in a résumé. It is, suitable for almost all types of organizations. It can also be modified according to the skill sets, required by a particular job. For instance, if engineering students wish to apply for the post of a, software executive post, they may highlight their skill sets in software., A biodata is a shortened form of biographical data, and has now become an obsolete term. In, this format, the emphasis is on personal details such as date of birth, nationality, marital status,, gender and address. The applicant’s hobbies may also find a place in a biodata. These details are, followed by the educational qualification, work experience, and skills for the job., A curriculum vitae contains all the elements of a résumé but it is more detailed in terms of, the academic credentials. It is generally used for a position in a research organization or when, the candidate applies for a research fellowship. A CV contains a detailed account of all the, papers published, papers presented at the conferences, and research projects carried out. On, the other hand, a résumé may just mention the number of conferences attended/ number of, papers published/a brief summary of the projects carried out. We can say that a CV is more, knowledge-oriented whereas a résumé is more skill-oriented., , Résumé Design and Structure, A résumé should present a brief summary of the candidate’s personal details followed by, details such as career objectives, educational qualifications, professional and technical skills, and, extracurricular activities and achievements. It should not be very long, as the applicant will get, the opportunity to present detailed information if shortlisted for the interview., , Appearance and elements , A résumé, like every important business document, should be impeccable. Any mistakes or, sloppiness here could raise doubts in an employer’s mind regarding the person’s capability. The, purpose of the résumé is to get called for an interview. It must be well-organized so that vital, information is readily accessible., A résumé should reflect the professional image that we want to create. It should be:, • Neat and error-free with no whiteouts or hand corrections;, • Legible and well-spaced;, • Printed on good quality paper of A-4 size; and, • Reproduced clearly on a high-quality printer or copy machine., There is lot of debate on the ideal length of a résumé. The general notion is that the more the, achievement in life, the lengthier the résumé. However, the ideal length for résumé is around, one page, and it should never exceed two pages. Employers are often unimpressed with longer, résumés that are hard to read and can seem padded, especially when they come from people, with comparatively little job experience. A long résumé may even prompt your disqualification, early in the selection process. All the details can be mentioned in brief. A concise, but complete, résumé saves the reader’s time and hence is more effective. If the employer needs further detail,, it can be provided in the second round., https://abdullahsurati.github.io/bscit
Page 169 : 162, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , While résumés can be organized in more than one way, they will almost always contain, the same basic information. Résumés are not autobiographies. The purpose is to gain the, opportunity for an interview, and not to give a detailed history., , Personal information, The first thing an employer needs to know is who you are and where you can be reached. So, include your name, address, phone numbers, email address, and website under this heading., Make sure that the information allows an interested employer to reach you easily. If you are, currently employed, this can be difficult and delicate. Career specialists recommend that you, proceed ‘carefully and cautiously’ and set up boundaries to keep your job search out of your, current employment. You may not want to list your current business phone or business email. A, personal email address and home or cell phone is preferable., One might set up a separate email account especially for seeking employment. Ensure that it, sounds professional and does not sound frivolous. An email ID like
[email protected], may be okay for personal use, but a prospective employer might not like it. A permanent postal, address should be provided, indicating how long the address will be valid (i.e. ‘until June 31’)., Career/professional objective, This element is optional. However, most employers agree that a statement of professional, objective should be included in a résumé. While stating the objective, make it effective by being, as specific as possible about the requirement or aspiration. For example,, Entry-level position in design and development of microprocessor circuitry; eventual advancement to position, as project leader or technical manager., A software sales position involving international experience in a growing company., , Education/academic preparation, While applying for a job when one is about to graduate, educational qualification and experience, are the highest selling points. Employers are usually interested in learning about the candidate’s, academic training, especially education and training since high school, degree earned, major, and minor fields of study, courses or projects done, and also the practical experience gained, during graduation., Begin with the most recent education and work backward. If the information will be helpful, and if space permits, we may consider listing notable courses taken. If the grade-point average, of the candidate is impressive, it should be included. Finally, note any honours earned. If the, individual has received awards for other accomplishments, all achievements can be listed in a, separate section entitled ‘Awards and Honours’., Work experience/professional skills, A prospective employer would always be interested in a candidate’s past work experience. When, describing work experience, list jobs in chronological order, with the present or last one first., Include any part-time or summer internships or projects done, even if unrelated to the career, objectives. It demonstrates the person’s ability to get and hold a job—an important qualification, in itself., Each entry in this heading includes the name and location of the organization where one has, worked or completed an assignment, the job title/designation, the duration of work, and also a, brief summary of the work., https://abdullahsurati.github.io/bscit
Page 170 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 163, , There is no need to use complete sentences; phrases will suffice. Be sure to use very concrete, language, including technical terminology, to describe the work experience. Place this section, either before or following the section on education, depending on which will be most important, to an employer., , Activities, achievements/special interests, aptitudes, memberships, Most employers want to know about special abilities that will make an individual a more, valuable employee. These include professional courses undertaken, community service/volunteer, activities, languages known (written and spoken communication), knowledge of handling, special equipment, relevant hobbies, and so on. The key here is to include only information, that the employer will find useful, and that casts the candidate in a favourable light. Activities, can be grouped into categories such as College Activities, Community or Social Services, and, Seminars and Workshops., Mention awards or honours received. Give details regarding the nature of the award, the, activity for which the award was received, date or month and year of receiving, and also the, authority from whom the award was received., If we belong to any organizations in our field, those can be listed under ‘Memberships’. Be, sure to include any offices or committee appointments held., References, This section should always be the last one in a résumé. For space and privacy considerations, one, may simply include the phrase ‘References available upon request’ and supply the names only, when and if asked for, as employers rarely investigate references until the candidate is under, serious consideration., If, however, the references are impressive enough to merit listing, follow these basic, guidelines. Choose only the three or four people who combine the best elements of familiarity, with the work and a credible position. A reference from a celebrity who barely knows you is not, as good as one from an unknown person who has worked closely with you. In any case, do get, permission beforehand from the people listed as references., , Types of Résumés , There are three types of résumés: chronological, functional, and hybrid (also called combination, résumé). Each type has its own advantages, and the one we choose will probably depend on the, specific job description that we apply for and our past accomplishments., , Chronological résumé, The chronological résumé emphasizes education and work experience and is most effective, when such experience clearly relates to the job we are seeking. Within the categories Education,, Work Experience, and Related Experience (if there is such a section), list entries in reverse, order, beginning with the most recent experience. Under each position listed under Work, Experience, describe responsibilities handled and accomplishments, emphasizing on relevant, experience with the skill set required for the job that one seeks. In case of recent graduates,, listing the education first makes sense. The chronological approach is the most common way of, organizing the information in a résumé, and it is preferred by most employers., https://abdullahsurati.github.io/bscit
Page 171 :
164, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Functional résumé, The functional résumé features the skills that the candidate has got (organizer, researcher,, manager, etc.). It provides examples of the most significant experiences that demonstrate, these abilities. This résumé emphasizes individual fields of competence and is hence used by, applicants who are just entering the job market, who want to redirect their careers, or who have, little continuous career-related experience. In a nutshell, it demonstrates the applicant’s ability, to handle the position they are applying for., While drafting a functional résumé, follow the Skills category immediately with a, chronological Work History and a scaled-down Education section that lists only institutions,, degrees, and dates. Either of the latter two categories may come first, depending on whether, most of the skills and experience were gained in college or on the job., Hybrid/combination, A combination résumé includes the best features of the chronological and functional résumés., However, this type is not popular or not commonly used as it tends to be very long and also it, may turn out to be repetitive in nature. Whatever the format, strong résumés possess the same, qualities:, • They focus on the employer’s needs., • They are concise., • They are honest., Exhibit 8.1 shows a sample résumé., Refer to the CD for another sample of résumé., , Scannable Résumés, A scannable résumé refers to a document that has been formatted in such a way that it can be, successfully scanned using optical character recognition (OCR) technology. It is also known, as a plain text résumé, as the technology used recognizes only the text and not any fancy fonts,, bullets, italics, or other ornamental features of the résumé., Though the contents of a scannable résumé may be similar to that of a print résumé, it is, prepared in such a way that all the required information can be easily scanned and loaded into, electronic programs. Scannable résumés save time as employers can quickly go through all, résumés when there is any vacancy, with the help of the search option. Many employers prefer soft, copies of the document, as it is easier to access them. PDF (portable document format) résumés, are in vogue, as the setting in these documents does not get disturbed. Many organizations have, their own format for résumés, which just have to be completed and submitted., Scannable résumés differ in format from traditional résumés. They require just simple, text and, as mentioned earlier, do not involve the use of underline, bullets, bold fonts, box or, table items, columns, etc. They include key words which are not generally found in traditional, résumés. In addition, they may run into even three or more pages, whereas traditional résumés, are generally restricted to one or two pages., Once received, the résumé is scanned into an electronic résumé database with the help of, OCR software. A scannable résumé assists employers in selecting the right person by using, existing databases to quickly match the applicants skills to suitable job openings., https://abdullahsurati.github.io/bscit
Page 172 : https://abdullahsurati.github.io/bscit, , EXHIBIT 8.1, , INTERVIEWS, , 165, , A sample résumé, , Gopinath M.C., Email:
[email protected], Mail: 248, Ashok Bhawan, BITS, Pilani, Rajasthan, India – 333031, Objective, • To associate myself with an organization that provides a challenging job and an opportunity, to prove innovative skills and diligent work, • To be involved in providing software solutions to enhance network security, Professional Experience, Project Trainee (July 2009–December 2009), Satyam Computer Service Ltd, Hyderabad, Project: Metadata Management System, Description: Metadata Manager is a tool to create and maintain data marts. It creates a centralized, metadata repository to store all the details about data marts., Databases, Technologies & Languages used: Oracle, Swing, JDBC, Java Security, XML, PL/SQL,, Java., Responsibilities, • Designed a database in Oracle to hold metadata., • Designed an appropriate graphical user interface for the system., • Led in the design and development of Security System for this application., Project Details, Implementation of secure File Transfer System (January 2009–May 2009): It involves the design, and implementation of Kerberos for File Transfer Protocol in C language., Kerberos improves the security of FTP by preventing replay attacks and IP spoofing. It uses DES, for encrypting the packet that reduces the processing time when compared with RSA., So the performance of FTP is not degraded., Learning Aids Development (January 2010–May 2010): It involves the design and development, of applets for BITS Virtual University. It includes the analysis of security vulnerabilities of applets., Courses Done, - Network Security, - Computer Networks, - Network Programming, - Telecommunication Switching Systems and Networks, Educational Background, Degree of Examination, *M.E., Software Systems, (Final Year), B.E. (Hons), Electronics, and Instrumentation, Higher Secondary, Examination, , Name of the Institution or, School, Birla Institute of, Technology and Science,, Pilani, Rajasthan, Birla Institute of, Technology and Science,, Pilani, Rajasthan, Bharathi Vidya Bhavan,, Erode, Tamil Nadu, , Year, , Division, , 2009–, present, 2005-2009, , 2003-2005, , First, Division, with 72%, Distinction, with 97%, , *Pursuing, , Page 1, , https://abdullahsurati.github.io/bscit, , (Contd)
Page 173 :
166, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , EXHIBIT 8.1, , (Contd), , Software Skills, , •, •, , Programming languages: C, C++, Java PERL, and Assembly/Machine Language, Technologies: HTML, Java Security, JDBC, Swing, XML, SQL PL/SQL, and GNU, Make., , •, , Operating Systems: Linux (extensive experience), UNIX, Windows 95/98/NT,, DOS, , •, , Security experience: Have helped to uncover multiple serious security holes in, the LAN network and to build Firewalls., , Accomplishment, Achieved a transfer of degree from B.E., (Hons) Electronics and, Instrumentation to M.E., Software Systems., Personal Details, Date of Birth:, Marital Status:, Languages Known:, Permanent Address:, , 28 April 1981, Single, English and Tamil, 1329 –A, KK Nagar First Street,, Kalingarayanpalayam,, Bhavani, Erode District, Tamil Nadu,, India – 638316., , References, • Mr Munikumar, System Analyst,, Satyam Computer Service Ltd, Hyderabad, Andhra Pradesh, India, • Mr Sunil Pal, Senior Software Engineer,, Satyam Computer Services Ltd, Hyderabad, Andhra Pradesh, India, • Mr Madhu Manohar, Senior Software Engineer,, Satyam Computer Service Ltd, Hyderabad, Andhra Pradesh, India, , Page 2, , The following are some tips that one should keep in mind while preparing a scannable, résumé (see Exhibit 8.2):, https://abdullahsurati.github.io/bscit
Page 174 :
https://abdullahsurati.github.io/bscit, , EXHIBIT 8.2, , INTERVIEWS, , Scannable résumé, , S. SRICHARAN, PHONE + 9 1 - 9529445673 • EMAIL SRICHARANSIYER@GMAIL . COM, ROOM NO 262 , RANAPRATAP BHAVAN , BITS - PILANI – 333031, BE (Chemical Engineering) & MSc Chemistry, 2005--2010, EDUCATION, - BITS, Pilani, - 6.34 (at the end of 9th sem), INTERNSHIPS, STERLING BIOTECH LTD, VADODARA (INDUSTRIAL TRAINING), July 2009 – Dec 2009, -World’s Largest Gelatin Producer, -Worked on the development of media composition, optimization, and scale up of, growth media for industrial fermenter (160,000 liter fermenter). Associated design, characteristics for effectiveness of the fermenter were also studied., INDIAN INSTITUTE OF SCIENCE, BANGALORE, June 2008 – July 2008, -Simulated and studied the sensitivity and control analysis as well as behavior of, cells in signaling pathway using CoPaSi (Complex Pathway Simulator). The study, also worked on the pharmacokinetic model to understand the parameters to, reduce the unwanted absorption of drugs., NATIONAL METALLURGICAL LABORATORY, CSIR CAMPUS, CHENNAI, May 2007 – July 2007, -Achieved breakthrough in a project for Govt of Bangladesh to remove arsenic, from drinking water by proposing a novel mechanism for their separation. The, project has been implemented and is now being used for water treatment., ACADEMIC PROJECTS, Project 1: Extractive separation and determination of chromium in tannery, effluents, -Work published in Journal Of Hazardous Chemicals (2009), Project 2: Currently pursuing a study on ‘Market parameters and resources for, effective advertising in chemical and pharmaceutical industries’, Project 3: Application of nanomaterial in drug discovery and selective drug, delivery research., ACADEMIC ACHIEVEMENTS AND AWARDS, Awarded the INAE (Indian National Academy of Engineering) summer fellowship, for my work at the Indian Institute of Science, -TEAM LEADER, United Way of Baroda (an umbrella NGO that manages 140 other, NGOs), , Page 1, , (Contd), https://abdullahsurati.github.io/bscit, , 167
Page 175 :
168, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , EXHIBIT 8.2, , (Contd), , POSITIONS OF RESPONSIBILITY, -CULTURAL SECRETARY of my hostel-Organization and Hosting of, ‘INBLOOM’, an intra-BITS cultural festival, -SENIOR CORE MEMBER, Department of Sponsorship and Marketing, for sports meet, -Played pivotal role in signing a 5-year deal with Adidas to supply, sports accessories for the meet. Also worked on routine sponsorship, acquirement for a budget of Rs 8 lakh., -SENIOR CORE MEMBER, Department of Informalz, during the annual, cultural festival on campus, -PROFESSIONAL ASSISTANT, for the course Main Trends in Indian, History, EXTRA-CURRICULAR ACTIVITIES AND ACHIEVEMENTS, -Black Belt (Sho-Dan) in Shutokon Style Karate, -Runner-up at the India Quiz, -Hosted a number of quizzes, -Silver medal for Shot-Put in Bosm 2007, OTHER INFORMATION, -Fluent in 5 Indian Languages and German., -Course topper in Modern Analytical Chemistry and Main Trends in, Indian History, , Page 2, , •, •, •, •, •, , Always use capital letters for section headings, Use any font size in the range of 11 to 14., Avoid decorative fonts, Do not use special characters such as bullets, Avoid using tables, any kind of graphics or shading, etc., https://abdullahsurati.github.io/bscit
Page 176 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 169, , •, •, •, •, , Do not try to make the résumé noticeable by using underline, shadows, italics, etc., Always give white space while ending one topic, Left justify the text, Jargon can be used, if required, but they should be specific to the organization with, which employment is being sought., • Place the candidate’s name at the top of the page, , The CD includes another sample scannable résumé., , Non-traditional Résumés, The résumés discussed in the preceding section fall under the traditional résumé category,, whether they are printed, sent through email, or scanned, as these focus primarily on providing, a large amount of information about the applicant. Traditional résumés generally do not have, the scope of using visuals/illustrations such as graphs, pictures, expressions, etc. Most of the, traditional résumés include the applicant’s photograph that serves as the only visual element., On the other hand, non-traditional résumés may serve better in making a good impression to, the prospective employer about the applicant. However, both traditional and non-traditional, résumés have their own pros and cons. Though the latter have become popular in Western, countries, they are still striving to gain momentum among the Indian applicants. As the future, job market may belong to non-traditional résumés, let us try to understand them in some detail., Non-traditional résumés can be made available for the employers in various forms and, through various channels. Your LinkedIn profile, though considered as non-traditional, may, resemble an online résumé that looks more or less like your traditional résumé. Infographics,, portfolios, video résumés, etc. are some other types of non-traditional résumés. They become, social résumés when they are uploaded on social networks such as Facebook, LinkedIn,, WordPress, etc., so as to enable the prospective employers to get an idea about your profile., , LinkedIn résumé/profile, One of the most widely used social networking sites LinkedIn helps you in professional, networking. Available in many languages, this site enables you to create your profile and connect, with other professionals. Once you have registered on LinkedIn, you can invite any other person, to join the group. You can get to see the job and business opportunities through your primary, and secondary connections. The prospective employers may get to see your profile on search., It is like your online résumé wherein you can add infographics, videos, etc. to highlight your, achievements. You can request people to recommend you for an admission, assignment, job, etc., and also endorse you for your skills and achievements., Infographic résumé, The word infographic is a combination of information and graphics. As we are aware, graphics, are nothing but visuals that are used to catch the attention of the viewers. These visuals can, be photographs, charts, graphs, diagrams, tables, etc., which can provide information about, your personality, skills, and achievements. If you create an infographic résumé, you can share, it with your connections on social networks and prospective employers. This non-traditional, form of résumé can accommodate a lot of information in much lesser space than that is used by, traditional résumés as shown in the Exhibit 8.3., https://abdullahsurati.github.io/bscit
Page 177 :
170, , TECHNICAL COMMUNICATION, , EXHIBIT 8.3, , https://abdullahsurati.github.io/bscit, , A non-traditional résumé, , Source: http://haganblount.com, accessed on 28 October 2014. Used with permission., , Portfolio résumé, A portfolio is a collection of personalized documents or materials, which serves as a record of, our professional development and a proof of your performances. For instance, your portfolio, may contain your latest CV, certificates of various nature, videos that showcase your presentation, skills, pictures of the work you have accomplished, etc. It is a good practice to create a portfolio, and update it from time to time so that you can keep it as a record and use it for various purposes., From this portfolio, a brief version containing very important and recent materials can be, created for your interviews because your interviewers may not have the time to go through the, entire thing. In fact, this interview portfolio should include the best examples of your academic, and professional achievements, and experiences. Look for the right time and opportunity to use, your portfolio during your interview. Electronic portfolios can also be created and shared with, your prospective employers. The site http://www.pampetty.com/profportfolio.htm may help in, providing certain guidelines for preparing your portfolio résumé., https://abdullahsurati.github.io/bscit
Page 178 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 171, , Video résumés, Video résumés are short videos created by the applicants to present themselves to the viewers., They generally last for two to three minutes and hence cannot serve as a complete résumé. A, video résumé supplements or reinforces the highlights presented in the traditional résumés or, admission essays. For example, the Young Leader Programme (YLP) run by the Indian School, of Business (ISB) asks the applicants to send a short video presenting their brief profile along, with other documents. The following are a few important tips that may help you in preparing, your video résumé:, • Plan thoroughly before shooting your video. Note down all the points you need to cover., Rehearse speaking them with enthusiasm., • Take care of your appearance; wear professional attire., • Look into the camera while preparing the video., • Record your video in a quiet place where there is no background noise., • Keep it short, approximately of two to three minutes., • Don’t speak fast thinking that you would be able to cover more information in a shorter, period of time., • Begin by telling your name and current position, etc., • Present the highlights of your résumé., • Say why you are the best for the assignment/position applied., • Conclude by thanking the viewers for giving you this opportunity., • Once recorded, view it carefully and ask your friends to review it., • Create a link to your video and mention this link in your traditional and other résumés., You can watch a sample video résumé at https://www.youtube.com/watch?v=7lHNXa5eHw#t=12., , MEDIA INTERVIEWS, Media interviews are an important aspect of public relations. Such interviews can do a lot to, promote business or government policies, and create awareness and acceptance of sensitive, issues concerning the public. These can be in the form of print, radio, or television interviews,, each mode with its distinct pros and cons. Generally, media gets prior appointment for the, interview and also informs about the topic focus. However, if they call up without any notice,, you can certainly ask for time—at least an hour or so. The following guidelines will help you, successfully tackle interviews to the media., • Be clear with your message and be ready with your, points., • Stay cool and smile., • Ignore the camera and maintain eye contact with the, interviewer/reporter., • Correct errors in questions. For instance, if the, interviewer asks, ‘How many courses do you offer in, your three campuses?’ If the number of campuses is, incorrect, you may interrupt and say, ‘Please note, we, have FOUR campuses’., • State the most important information first and then, provide the background., https://abdullahsurati.github.io/bscit
Page 179 :
172, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Do not exaggerate., • Split complex/multiple issues in a question (For example, ‘Can we have your views on, reservation policy, disability issues, and the women’s rights bill?’) and then answer., • Avoid saying things off the record/informal., • Be honest. If you are asked about any negative information, try to explain what you are, doing to correct it rather than hiding or refusing to give the information. For example,, for the question ‘Why your organization was ranked low last time by XYZ survey?’, you, can explain the measures you are taking to come up the list rather than getting annoyed, over the question or refusing to answer., • Do not be in a hurry to respond. Pause for a few seconds after the reporter completes the, question and then answer., • Do not take the reporter’s mistakes personally. The reporters may err sometimes because, of some communication gap., • Maintain professionalism throughout your interview., • Be assertive but do not be pushy., • If a reporter asks you a question that you may not want to answer, explain why. (‘We do, not have enough information right now. We will inform you later on this.’) Some people, even say that they do not want to answer. Remember, you have the control when you are, approached by media for an interview or you yourself are organizing it., • Avoid using business/academic jargons., • Finish the interview before the scheduled time if reporters misbehave., • Take care of your appearance—dress, make up, accessories, etc., • Use your body language and voice effectively during the interview., • Do not try to force the information. If you spend time in pushing a particular point, you, will lose your time for other issues., • Never refuse a media interview., • Stay on track with the message, and project enthusiasm through your messages., • Make sure to track/monitor the results and get reviews of your performance., , PRESS CONFERENCES, Press conferences (also known as news conferences) are voluntary interviews or presentations, given by the governments, businesses, or other organizations to various media to get their stories, or information across various television channels or newspapers across the nation. There may be, more than one speaker in such a conference. Sometimes only questioning occurs; sometimes there, is only a statement with no questions permitted., The party initiating the press conference decides what information, to be made public through the media and informs the media about, the date, time, and venue of the press conference. The party starts, the conference by presenting the prepared information and then, answers the questions posed by the reporters invited from various, media. Press conferences serve as powerful tools for organizations to, publicize themselves in a new light that has not so far been covered, by the media., Press conferences are often held by politicians, sports teams,, celebrities or film studios, commercial organizations to promote, products, attorneys to promote lawsuits, and almost anyone who, ‘I am happy to say that both parties, agree to disagree on the issue.’, finds benefit in the free publicity afforded by media coverage. These, https://abdullahsurati.github.io/bscit
Page 180 :
https://abdullahsurati.github.io/bscit, , INTERVIEWS, , 173, , are also often used as a tool to clear up any public doubt on any individual’s or organization’s, actions. Every one of us might have watched several press conferences on the television, channels during the deliberations on the nuclear deal between India and the USA., , Preparation, Guidelines for an effective and efficient press conference are as follows:, • Define your goal clearly: Why do you want to invite the media? To get publicity/to, inform a new decision (your new admission process, your new mergers and acquisitions,, etc.) taken by your organization/to convey the growth of your organization/to persuade, people to accept your point of view., • Ensure that the information you are going to convey through press conference has not, been covered by any media so far., • Decide upon and prepare the message you wish to convey., • Prepare all necessary background material for the conference. For instance, if your press, conference is about a new policy, you should have a clear idea about the existing policy,, their shortcomings, why there is a need for change, etc., • Prepare visual aids, handouts, etc., • Set the venue, date, and time of the press conference., • Inform the media at least one week in advance unless it is an emergency press conference., • As your interview will appear on television, arrange the stage, public address system,, etc., and prepare a good backdrop for the stage on which you and your colleagues will be, sitting and addressing the media., • Decide who else other than media representatives should attend the press conference. You, may like to invite some senior officers from your sister concerns or other organizations as, guests. Inform them the venue, date, and time., • Choose/appoint your spokespersons for the conference so as to avoid too many people, talking at one time. The person should be knowledgeable and should be a good speaker., • Appoint a moderator who will be able to control the proceedings in case the reporters, deviate from the issue to achieve their personal agenda, if any., • Rehearse at least once with your team—the spokespersons, moderator, etc., , Process, The following points are guidelines to start, handle, and end the conference effectively., • Arrive with your team at least ten minutes before the scheduled time., • Invite the media personnel and distribute the material—a copy of the press statement., • Register the contact addresses and names of attendees., • Facilitate the media to set up their equipment and to be comfortably seated., • Start the conference on time., • Ask the moderator to welcome the gathering, introduce the speakers, and then allow the, spokesperson to give the message., • After the message is spoken, allow the reporters to ask questions. Answers from your, side should be simple, brief, and to the point., • Control the repetition of questions. Keep the conference short and crisp and do not, stretch it too long., • Be tactful in controlling the media. Keep yourself cool and do not get emotionally upset, over any question., https://abdullahsurati.github.io/bscit
Page 181 :
174, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • End the conference by thanking the invitees and inform them that they can contact your, organization for additional information, if they need., • If some media representatives do not turn up, you may send copies of your press statement, to their offices., , SUMMARY, An interview is a major form of interpersonal communication. Conducted for various purposes, this, form of communication plays a significant role in, the lives of students as well as professionals. Interviews are conducted for recruitment, performance, appraisals, information gathering and exchange,, counselling, etc., Although there are many types of interviews, the, most common type of interview faced by almost, everyone is the job interview. Job interviews vary in, their nature and style from industry to industry and,, hence, demand different types of skills depending on, the specific job vacancy, level of experience, or industry., However, there are certain universal steps toward, mastering the art of giving a successful interview. It, is important to learn how to manipulate the various, relevant factors, such as knowledge, personality, body, language, leadership, and communication skills, to be, successful in these interviews., , Job interviews can be conducted face-to-face,, through videoconferences, or telephonically. This, chapter provides guidelines on how to tackle these, various modes. It lists the various steps towards, preparing for an interview, such as brushing, up subject knowledge, overcoming the jitters,, answering techniques, and follow up. It also lists, some standard questions and sample answers to, help prepare readers for interviews., Résumés are also considered to be an important, aspect of preparing for interviews. The other, interview types dealt with in this chapter are, media interviews and press conferences. As an, important aspect of public relations, these events, help create awareness and acceptance of sensitive, issues concerning the public. The chapter provides, guidelines and tips to tackle these interactions, effectively., , EXERCISES, 1. Write short notes on each of the following terms, with special reference to job interviews in about, 100 words., (a) Mental agility, (b) Unsuitable personality, (c) Interpersonal skills, (d) Apathy, (e) Behavioural questions, 2. Assume that you are one of the interview panellists who are going to a renowned institution for, engineering and technology in India for campus, interviews. Prepare the plan for your entire interview process including all the types of evaluation, components that are required to assess the candidates thoroughly. Invent necessary details., 3. Answer the following questions briefly:, (a) If you wish to switch jobs because you cannot, work with your supervisor, how would you, explain this to a prospective employer?, , (b) What can you do to create a favourable, impression when you discover that an openended interview has turned into a stress, interview?, 4. Read the following statements carefully and say, whether they are true or false., (a) Job interviews are always conducted at the, office of the employer., (b) Job interviews vary in style from industry to, industry., (c) Preparing your résumé is all the groundwork, necessary for an interview., (d) An interview is one sided if the interviewer, asks questions and you answer., (e) Interviewers only ask simple yes/no questions., (f) Interviewers are interested not only in your, résumé but also in your appearance., (g) There is no difference between a résumé and a, biodata., , https://abdullahsurati.github.io/bscit
Page 182 :
https://abdullahsurati.github.io/bscit, , (h) At a campus interview find out all about the, organization from the interviewer., (i) Listing your skills and accomplishments is, important to preparing for an interview., (j) Researching the employer allows you to play, an active role in an interview., (k) Dressing in bright colours for an interview is, appropriate., (l) One of the tools used to research a potential, employer is magazines/newspapers., (m) Simply answer yes/no to questions in an, interview., (n) Arrive for an interview on time., (o) It is not important to keep eye contact during, an interview., (p) Relate your experience to the job applying for., (q) It is rude to ask an interviewer to repeat or, clarify a question., (r) An interview is an opportunity for you to find, out more about a prospective employer., (s) It is sufficient to thank the interviewer once at, the end of an interview., (t) Call the interviewer by his/her last name unless, otherwise specified., (u) An interviewer cannot ask you what salary you, would like to earn., 5. Discuss with your friends and try to work out answer for each of the following questions that may, be asked in an interview:, , INTERVIEWS, , 175, , (a) Imagine you are dead. You have lived a long, happy life. What would your obituary say?, (b) How will you want people to remember you, when you have gone? (family, friends, etc.), (c) What is your ideal organization?, (d) What is the one question you do not want to, ask me?, (e) What is the salary range that you expect?, (f) What is the advantage of being a single child?, (g) Why should we hire you?, (h) Are you a quick learner? Give an example., (i) What motivates you?, (j) Tell any three things you expect from our, Company., (k) What is your biggest achievement/failure in, life?, (l) Who is your role model?, 6. Assume that as the President of XYZ Global, Services, Mumbai, you have called for a press, conference to give information regarding the, new collaborative ventures you have signed with, ABC Global Corporation, Sydney. You are planning, to introduce your Vice President and the Head,, Public Relations and Communication, of your, organization and then to brief the Press about, the new collaboration. Prepare the text of your, introduction and briefing in about 500 words., , https://abdullahsurati.github.io/bscit
Page 183 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 9, , OBJECTIVES, You should study the, chapter to know, , • the various forms of group, , communication, such as, discussions, meetings,, conferences, seminars,, symposia, and negotiations, • how to use effective, body language in group, communication, • effective ways of carrying, out the various functions, required of participants in, formal discussions, • how group discussions (GDs), are conducted as a part of, organizational discussions, as well as the recruitment, process, • how to prepare for and, conduct formal meetings, and conferences, • the strategies for effective, and successful participation, in GDs, meetings, and, conferences, • the written forms of group, communication: brochures,, bulletins, and newsletters, , Group Communication, , INTRODUCTION, As against dyadic communication (i.e., one to one) and mass, communication (i.e., one to many), group communication implies a, many-to-many communication. Teamwork and group communication, form an integral part of most organizations that embrace the concept, of an open organizational climate and participative management—in, factories, corporate offices, research laboratories, universities, hospitals,, law offices, government agencies, etc. This is largely because of the, complexity of decisions that have to be made when we are dealing with, groups as opposed to individuals., Although teams are different from groups in that the former is, process-based while the latter is function-based, they share common, communication processes. For example, when a company sends one, of its project teams to develop software for its clients abroad, that, particular team carries out a process. However, when the company, nominates a group to discuss the changes it may wish to bring about in, its manufacturing unit, the group considers a function. In other words,, a team’s objective is set, and the members are assigned specific duties to, achieve a specific goal; a group on the other hand is more involved in, discussing and planning the achievement of long-term goals. However,, groups develop into teams when their common purposes are clearly, understood by all the members and their leaders are identified., The members of an organization may communicate in groups to, achieve any of the following purposes:, •, •, •, •, •, , Share and exchange information and ideas., Collect information or feedback on any project/policy/scheme., Arrive at a decision on important issues., Solve a problem concerning the organization as a whole., Discuss issues involving the group itself or for the benefit of a, larger audience., • Elicit feedback upon any work undertaken or research performed., , https://abdullahsurati.github.io/bscit
Page 184 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 177, , Discussions play a crucial role in relationship building and decision-making. In the following, sections, among the various forms of group communication, we will study the various aspects, of organizational as well as recruitment discussions as also the skills and strategies required for, successful group communication., , FORMS OF GROUP COMMUNICATION, Depending on the purpose, structure, and characteristics,, group communication takes various names such as discussion,, meeting, conference, seminar, group discussion, symposium,, convention, etc. (Tables 9.1 and 9.2). Since all these forms, of group communication involve oral communication, they, require effective oral communication skills that would enable, the members to present and discuss their or their organization’s, points of view on the topic of discussion convincingly., TABLE 9.1 Major forms of group communication, , Name, , Purpose/objective, , Structure, , Meeting, , • To convey information to • Two or more, • Punctuality, a group of people, persons to, • Presided by a, several hundreds, • To instruct, brief, make, chairman, decisions, solve problems • Formal physical • Started with an, setting, introduction, Problem-centred, • Discussionoriented, • Informationcentred, • Fair chance to, everyone, • May be periodic, • No side, conversations, • No hidden agenda, • High degree of, formality, • Ends with a, conclusion, , Seminar, , • To present the results, of an original research, or advanced study/, evaluation of ideas, • To share knowledge, and, viewpoints, , • Small groups, of experts or, well-informed, persons, , Characteristics, , Procedure, • Notice given, • Agenda prepared, • Minutes recorded, , • Academic in nature • Presentation of a topic, • Close interaction, • Discussion, with lead speaker, • Free discussion, , https://abdullahsurati.github.io/bscit, , (Contd)
Page 185 :
178, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , TABLE 9.1 (Contd), , Name, , Purpose/objective, , Structure, , Characteristics, , Procedure, , Group, discussion, , • To exchange information, , • Seven to ten, , • No named leader, , • Comprehension, , • To solve problems, , • Minimal rules, , • Discussion, , • To convince, , • Free verbal, interaction, , • Conclusion, , • To make decisions, , • Interdependent, , • To assess or judge, personality traits, , • Impersonal, • Conclusive, , Symposium • To discuss different, aspects of a problem for, an audience, , • Any number, , • Formal, • For larger audience, , • Presentation of, an aspect by each, participant, • Audience participation, , Panel, discussion, , • To exchange ideas, • Small number, through conversation, of panelists, and cooperative thinking, (experts), , • Moderator present, • Meant for public, discussion, • Includes, programmes on, radio and TV, , • Problem/topic put, across as a question, • Answers given by, panelists, , • Less formal than, meetings, Conference, , • Any number of, participants, , • Presentations, • Discussion, , • Wider subject, matter, • Several sessions, Convention • To discuss matters of, professional interest, , • Rigorously, structured, • Professional, gatherings of, companies,, associations,, societies,, political parties,, etc., , • Formal, , • Sharing of views, , • Issues associated, with the particular, profession, , USE OF BODY LANGUAGE IN GROUP COMMUNICATION, Body language plays a very significant role in group communication, which involves more, interaction among the participating members than any other form of communication. Each, member of the group has an opportunity to use body language for effective communication,, unlike in public speaking and professional presentations, where only the speaker’s body language, https://abdullahsurati.github.io/bscit
Page 186 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 179, , TABLE 9.2 Characteristics of major forms of group communication, , Intensity of, , Degree of, , formality, , Extent of use of, body language, , Level of, , structure, Meeting, , 3, , 2, , 2, , 2, , Seminar, , 2, , 2, , 2, , 3, , Group discussion, , 1, , 1, , 3, , 3, , Symposium, , 2, , 3, , 2, , 2, , Panel discussion, , 2, , 3, , 2, , 3, , Conference, , 3, , 2, , 2, , 2, , Convention, , 2, , 3, , 2, , 2, , Forms, , interaction, , Very high = 3; High = 2; Low = 1, , is noticed. In a group, each person exhibits and observes the facial expressions, postures, and, gestures of others in order to understand the intentions behind what is being communicated, through words. However, depending on the degree of formality of the groups, the use of body, language may vary. For instance, while formal meetings at workplace may not involve much use, of body language, GDs, which are less formal, may entail more use of body language as an aid, in effective communication. Given below are certain general guidelines for the effective use of, body language in groups:, • Maintain eye contact while speaking and listening to others., • Adopt facial expressions that show interest and enthusiasm in participation. Restrain, emotional expressions during an argument or disagreement., • While communicating in a small group, use small hand gestures in order to avoid, encroaching upon the personal space of others., • As the members sit and communicate with each other, their movement may be restricted, to a certain extent in a group. However, try to bring in some change in posture even, while sitting, for instance, sitting cross-legged, placing one arm on the back of the chair,, leaning on the chair briefly, etc., • While setting up the venue for group communication, there should be adequate space, between the seats so as to avoid members from sitting very close to each other., • Observe the non-verbal cues of others and try to understand the intentions behind their, verbal cues., , Table 9.3 gives a general idea about certain non-verbal cues frequently used in a group, communication and their meanings. Group Discussion Situation 4 in the CD demonstrates, the use of positive body language., The following sections discuss the major forms of group communication that are widely, used in academic and business settings and their features. We start with a general description of, discussions and then explain the manner in which various discussion situations can be handled., https://abdullahsurati.github.io/bscit
Page 187 :
180, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , TABLE 9.3 Non-verbal behaviour in group communication, , Body language signal, , Intended meaning/interpretation, , • Tilted head, , • Interest, , • Drumming fingers/tapping foot, , • Impatience, , • Drooping shoulders, , • Lack of interest, , • Open palms, , • Sincerity, openness/candidness, , • Folded arms, , • Complaint/nervousness/feel threatened/ disagreement, , • Slumped posture, looking away, , • Suppressed anger or irritation, , • Staring, , • Attention seeking/aggression, , • Hand-wringing, , • Acute anxiety/worry/tension/stress/need for sympathy, , • Pointing fingers at you while talking, , • Complaint/aggression/anger/frustration, , • Nodding while listening, , • Agreeing/signalling understanding, , • Head rubbing, , • Puzzled/stumped by question, , • Frowning, , • Intense listening/potential disagreement/confused/need more detail, , • Fiddling with accessories/jewellery, , • Discomfort/embarrassment/stress/in need of second opinion, , • Looking down to the left, , • Having conversation with themselves, , • Narrowing eyes, , • Disbelief/anger, , • Raised eyebrows, , • Sarcastic/disbelief/smug, , • Smiling/leaning forward/eye contact, , • Friendly/interested, , • Hand to cheek, , • Evaluating/thinking, , • Head resting in hands with eyes looking, down, , • Boredom, not interested, , • Steepled fingers, , • Authoritative/feeling superior, , • Hands covering mouth or face/rapid, blinking/little use of eye contact, , • Shy, , • Leaning back in chair with hands clasped, behind head, , • Overconfident/arrogant/wanting to belittle you, , DISCUSSIONS, Discussions are conversations held among people face-to-face or over phone. They may be, formal or informal. They are generally initiated to exchange information, views and opinions,, persuade, appraise, make decisions, or solve problems., Suppose you, as the president of the students’ union of your college,, wish to introduce some changes in the annual technical festival. Before, convening a formal meeting, you might want to work out the details with, your professor who is the faculty-in-charge of the festival. However, before, going to your professor, you wish to call your friend and talk about the, details with him. Looking at these communication situations, you may, find that your conversation with your professor may be called a formal, discussion while your chat with your friend an informal one. Discussions, may take place between two persons as seen in these examples or among, three or more people in which case they may be called group discussions., https://abdullahsurati.github.io/bscit
Page 188 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 181, , The participants in a discussion carry out several functions, each of which is discussed in the, following sections., , Introducing Oneself/Others, While initiating a discussion with people we meet for the first time, we would first introduce, ourselves and then ask others to introduce themselves so that the entire group knows each other, before the discussion begins. While introducing oneself, it is preferable to use one’s first name, in informal situations and full name in formal situations. It would be appropriate to smile, look, friendly, and keep the introduction very brief by giving our full name and designation. Avoid, titles such as Mr, Ms, Dr, or Prof. while introducing oneself, but use them while introducing, others. For example:, ‘Good morning, I am Dilip Kulkarni, Coordinator, Techfest 2010.’ (introducing self ), ‘This is Mr Naresh Kohli, leader of the sponsorship team.’ (introducing others), ‘Excuse me, friends, could you please introduce yourselves?’ (if you want others to introduce themselves), , Leading and Directing Discussions, When leading and directing discussions, we need to be very clear in our mind about the, objectives of our discussion , to decide what has to be done in a situation and to know how to, do it. It is a good idea to give a brief introduction to the objectives and then invite suggestions, from the members. We may have to repeat or paraphrase somebody’s viewpoints in order to, ensure that we have understood them correctly. The tips given below may be helpful:, •, •, •, •, •, •, , Listen carefully., Take notes on others’ viewpoints., Do not allow anybody to waste time., Do not allow anybody to deviate from the main focus of the topic., Get your doubts clarified from the speaker., After weighing all opinions, decide which one to accept and then seek final consent from, others on this viewpoint., • Decide what is to be done in particular situations and explain how to carry it out., • Delegate responsibilities to each member and fix a deadline to complete the task., • Motivate and inspire members in achieving the objective of discussion., , Expressing Opinions and Ideas, While expressing an opinion, we can follow the ORE (opinion, reason, example) pattern as, shown in the sample below:, , X: What do you think about stopping the use of mobile phones in our college?, YOU: I think/In my opinion, it is not a good idea/I don’t think it is a good idea (O)., Y: Why ?, YOU: I feel that/My view is that mobile phones serve as the best tool to be in touch with others in college (R)., X: Why do you want to be in touch through mobile phone when all your friends are available in college?, YOU: Say, I am in the library and I want to ask my friend who is not with me about some information about, the contents of a book or say my parents want to contact me urgently, they can send me a message or talk, to me if I am free (E)., , Please note that even if others do not raise any interim questions, you can follow the ORE, pattern. It gives others a complete picture about your opinion., https://abdullahsurati.github.io/bscit
Page 189 :
182, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Expressing Agreement/Disagreement, While expressing your views, opinions, or suggestions during discussions with your group, members, you cannot expect every member to agree with you. Some may have the same views,, while some may have different. Likewise, you may also accept or reject others’ suggestions., Though agreement can be expressed easily with words such as exactly, right, yes, etc., and, with a spirited tone, disagreement has to be expressed politely using ‘I am not so sure, Do you, think so?, well, it depends, etc.’, with controlled body language. However, if you know the other, members very well, you can disagree directly using ‘I disagree, I cannot agree with you, I am, afraid your idea is wrong, etc’. Look at the following examples:, Agreement, X: I say that we should not stop the use of mobile phones completely., YOU: Exactly. (expressing complete agreement), X: Do you mean to say we should allow Internet browsing during the working hours?, YOU: Yes, that is exactly what I said. (expressing complete agreement), X: I say that we should stop the use of mobile phones in our college., YOU: I agree if it is applicable only to the classrooms. (partial/conditional agreement), , Disagreement, Although it is true that stopping the use of mobile phones may have some advantages, I do not think it is a, good idea. (strong disagreement), While I agree that stopping the use of mobile phones may have some advantages, I feel that we should discuss, it thoroughly. (polite disagreement), , Decisions and Intentions, We may have good intentions, but if our decisions are incorrect, our discussions may not yield, fruitful results. While an intention is what we intend or plan to do, a decision is what we will, be doing. For instance, when we may intend to travel by air but decide to do so only when, our ticket is confirmed. So, while intentions may refer to a probability of a desired action,, decisions refer to settling or fixing on the same. At times intentions and decisions may be the, same while at times, they may be different. During a discussion, we may have to express both. I, wish/would like to adopt..; we are keen to bring in changes…; the company is eager to introduce…are, used for expressing intentions while I will adopt…; we are bringing in changes…; the company is, introducing …, etc. are used to express decisions. Look at the following statements:, It is not a good idea to stop the use of mobile phones in college. What I would like to do/I may do is to stop using, them in classrooms. (intention), , It is not a good idea to stop the use of mobile phones in college. What I will do/I am doing is to stop its use in, classrooms. (decision), , Raising Questions, You might have watched the discussions in parliamentary sessions that involve a flurry of, questions. Raising questions is essential in discussions and an inherent part of it. Questions, may be raised for various purposes, such as to get more information, to paraphrase, to raise a, doubt, to make an offer, to seek permission, etc. See the following examples:, Could you elaborate more on that?, Are you trying to say that use of mobile phones should be completely stopped?, https://abdullahsurati.github.io/bscit
Page 190 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 183, , Shall I do this for you?, Shall we go ahead with discussing this point?, , Giving and Receiving Effective Feedback, Feedback is an important tool in assessing the effectiveness of communication. Both giving and, receiving feedback are necessary to make a discussion goal-oriented. The following are a few, useful tips when giving feedback:, , • Be specific rather than general: If the topic is ‘stopping the use of mobile phones in your, college’, provide specific feedback on the ideas to be implemented in your college rather, than on those meant for universities in general., • Check the accuracy: Ensure that you know exactly what ideas were discussed before, providing feedback on each., • Demonstrate your good intentions: Show that you are giving feedback with the intention, of achieving the goal of the discussion. Commenting on the positive aspects first and, then on the negatives is always helpful in this regard., • Describe what you feel about others’ ideas rather than evaluating the persons who spoke, them., • Choose the right time to give a feedback: Ideas are generally taken up one by one during, discussions. Hence, feedback should ideally be given at the end of each topic discussed., , Seeking feedback is always helpful in gauging the contribution of our points/views to the goal, of the discussion. Hence, always show interest in receiving feedback from fellow participants., The following guidelines can be followed when receiving feedback:, • Be open-minded while receiving feedback., • Display appropriate body language to show interest in receiving feedback., • Listen completely before reacting to the feedback., , • If your views are criticized and the flaws pointed out, accept the comments if they are, true or explain politely if your views are correct., • Suspend your judgement while listening to the feedback., • Ask questions or for examples if you need clarification on any feedback., • You can also ask the other participants’ views on the feedback., • Appreciate the people who have provided feedback., , Discussing and Delivering Negative News, Raising sensitive issues around improper behaviour, (e.g., ill-treating junior employees), providing a, critical performance review (the employee having, not performed well during a project), etc. may be, considered as difficult or negative issues. Discussions, on these matters generally involve a lot of emotional, reactions—both verbal and nonverbal. Such, discussions may have to be handled skilfully so as to, avoid unpleasant scenes during the discussion sessions., Follow these guidelines:, https://abdullahsurati.github.io/bscit
Page 191 :
184, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Know the attitude of person with whom the difficult issue has to be discussed., • Know the message to be delivered and the ensuing result., • Identify the right words/language to be used during the discussion (e.g., ‘I know that the, project has gone wrong. I want to explore with you how to make it better.’)., • Do not point out mistakes personally, i.e., using the ‘you’ attitude (e.g., ‘You have spoiled, the project.’)., • Follow LEAD (listen, explore, and deliver a solution) approach., • Manage emotions. Do not allow others to dominate during the discussion of negative, issues., • Avoid blaming others. Instead, tell them how they could have behaved/performed in, order to contribute significantly to the progress of their organization., • Give enough time for others to grasp your views., • Do not allow personal beliefs and values to interfere with your judgement. Try to look at, things from others’ perspectives as well., • Be concise and timely., • Be sincere in your discussion. (e.g., express your concern for the receiver)., • Use empathy: Imagine yourself in the receiver’s position and then phrase the message., • Keep the lines of communication open even after the discussion (e.g., If the receiver wants, information regarding any other source or further assistance, provide the help if possible)., Discussing difficult issues may be uncomfortable. However, if it is done with concern,, compassion, care, and credibility, it would be possible to retain the goodwill of the receiver., Handled appropriately, such interactions may even help build a pleasant relationship., , Counselling, At times, discussions may be held to counsel people who require advice on a matter or who have, not responded to some advice or assistance provided by others. For instance, a student may have, to be counseled for poor performance in studies or for improper behaviour in the institution., A doctor may counsel a patient who refuses to take medicine. Keep in mind the following tips, while counselling somebody:, • Briefly explain what was expected from them., • Ask politely why they have not met the expectations., • Give them opportunity to explain the reasons behind their poor performance or for not, following the advice., • Listen patiently and with interest so that the persons seeking counselling develop trust, in you., • Offer your advice, explaining it with adequate examples to justify why it will work., • Specify the future course of action and a date for the next discussion if required., , Concluding, Chapter 6 has already introduced several expressions that can be used as conversation closers., The following tips may help in effectively concluding a discussion:, • While concluding a discussion, thank everybody for contributing significantly to the, discussion goal. If necessary, mention the most significant points raised by certain, participants, thereby recognizing their contribution to the decision-making process., https://abdullahsurati.github.io/bscit
Page 192 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 185, , • Inform if further discussions are required and, if so, announce the date and time of the, next discussion., • Summarize the major points of the discussion and the decisions made., • Never conclude the discussion abruptly., • While concluding difficult discussions (conveying negative messages), remember not to, exhibit authority/power. Be empathetic., , GROUP DISCUSSIONS, In group discussions (GDs), a particular number of people (approximately three to eight) meet, face to face and, through free oral interaction, develop, share, and discuss ideas., Group discussions are widely used in many organizations for decision-making and problemsolving. They are also used widely as a personality test for evaluating several candidates, simultaneously to select personnel for positions of responsibility, especially in the service sector,, and also to select students for admission to professional institutes., The Indian defence forces were the first to tap the potential of GDs and incorporate them, into their battery of tests for recruitment of officers. Since then, GDs have become popular with, various recruiting bodies because of their operational ease and effectiveness in terms of both, time and cost. Most reputed business schools require students to participate in a GD before, moving on to the final stage of the selection procedure, the interview. In a few cases, the GD, may not be an elimination round, i.e., every person who participates in the GD also gets an, opportunity to appear for the interview., The preceding section on discussions familiarized us with the various functions performed, by a participant during a discussion. A GD also includes all those functions, and hence the, same guidelines apply. However, when we discuss issues as a group, we need to give importance, to the characteristics of group behaviour—group orientation, orderly conduct, time-sharing,, involving everyone, respecting others’ viewpoints, cooperation, etc. In the following sections, we, will discuss some strategies that can be used to perform well in group discussions., , Speaking in Group Discussions, Here we provide guidelines that would help one to speak effectively in a GD., , • Seize the first opportunity to speak if you have a good understanding of the topic of, discussion., • Listen patiently to others and then react to their viewpoints., • Speak clearly and audibly so that everyone hears and understands., • Be concise in your expressions. Do not repeat ideas just for the sake of speaking, something., • Ask for clarification, if necessary., • Facilitate contribution from others., • Use statistics and examples to justify a view point (see GD Situation 7 in the CD)., • Avoid talking to only one or two persons in the group., • Assume an impersonal tone. Treat all members as fellow participants; none in the group, is either a friend or a foe., • Be assertive without being aggressive; be humble without being submissive (see GD, Situation 2 in the CD)., • Raise your voice (just enough to be heard) and speak out a strong point in case of a fishmarket-like situation in a GD., https://abdullahsurati.github.io/bscit
Page 193 :
186, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Conclude objectively by briefly presenting the important points of the discussion and, any decisions taken (see GD Situation 10 in the CD)., , Ambiguity can be dispelled by properly defining the concepts. In case we use a term that is, not clear to the listeners, it should be immediately explained: for example, ‘let me explain what, I mean by honour killing’., The language used must be accurate. Clarity and accuracy work in tandem. When we fall, short of words, accuracy and clarity may suffer. Use words that correspond as explicitly as, possible to reality. The choice of words must suit the discussion situation. For example, words, and sentences can be less formal in some situations and more formal in others. If the problem, being discussed is profound, it may require more careful word choices, definitions, and sentence, constructions than simpler subjects. Avoid technical words, obsolete expressions, colloquialisms,, etc. as listeners could be unfamiliar with them., Connotative words should be used with caution. In fact, it would be advisable to be sensitive, to the distinction between denotations and connotations; else we may not only fail in our, communication, but also end up with tarnished interpersonal relations. Phrases such as the, following may be regarded as inconsiderate:, • You sound preposterous., • That is ridiculous., • We will be mocked at., , • We are too small for it., • Let us propose something feasible., , These statements may put the listeners off, and their reactions might be affected., The other speech skill besides effective use of language is the effective delivery of messages., Speech should be made with intelligibility. It is important to be accurate with our articulation,, e.g., with the words ‘effect’ and ‘affect’. Listeners may misunderstand if some sounds are omitted, or distorted., We must sound natural as we would in an informal conversation. Stilted and unnatural voice, puts off the listeners. Ensure that facial expressions, bodily actions, and gestures match the voice., It is essential to be direct in speaking as well as in making eye contact so as to hold the attention, of and communicate effectively with the listeners. We must also speak with enthusiasm and, conviction in order to engross the listeners. Use of vocal variety would be effective because, speaking without modulations might make us sound dull and indifferent., , Discussing Problems and Solutions, In a discussion, identifying the problem can sometimes be a little difficult. The problem can be, related to a personal, social, physical, or mental aspect, or it might be organizational—technical,, managerial, or business related., The problems related to an organization are easier to analyse and solve, because in an, organization the number of possibilities of the cause of a problem and the consequences of the, solution are relatively simpler to analyse than the problems related to a society., Problems must be discussed in detail so that each participant of the team understands, it. When beginning a discussion on a problem encountered, try to define the problem first., Defining a problem helps to understand what the problem is and also the nature of the problem,, which in turn is crucial to solving the problem. For example, if a department is not working, satisfactorily, then we should try to define the problem exactly, i.e., whether the problem is with, the efficiency of the department or the output of the department., Once the problem is identified, get into the discussion about finding a solution. Talking about, problems in terms of systems makes the discussion easier. What are systems? Any mechanism, https://abdullahsurati.github.io/bscit
Page 194 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 187, , put in place, which takes inputs from various factors and produces outputs, is a system. The, management of a company or a pipeline for manufacturing a product can be regarded as a system., Having identified the problem means we have identified the system that is causing or facing the, problem. Now all that needs to be done in order to find a solution to the problem is to identify the, various inputs or factors that affect the system. Discuss elaborately the factors of the system. The, problem should be discussed with participants who are experienced in the field so as to identify, what factors are most likely to cause the problem. Each factor can then be individually checked to, determine the root cause of the problem, which can then be directly addressed., Once the root of the problem has been identified, there may be the problem of multiple, solutions. Choosing the optimal one is essential because the solution should not only fix the, problem within the system but also ensure that its consequences do not cause further problems, in other systems. Discuss the pros and cons of the various solutions and take inputs from each, member. Taking into account the consequences of the particular action taken for solving the, problem helps obtain an optimal solution., , Creating a Cordial and Cooperative Atmosphere, It is said that ideas flow free in an atmosphere conducive to the participants. By creating a, friendly and cooperative environment during a GD, we may be able to derive better solutions, to our problems or create more ideas as the members’ contributions are maximized. However,, creating such an atmosphere is the responsibility of each member of the group. In an atmosphere, that promotes friendliness and cooperation, we feel positive, optimistic, confident, and assertive, and hence will voluntarily contribute to the discussion. The following strategies might help us, understand how to create such an atmosphere in GDs:, •, •, •, •, , •, •, •, •, •, •, , Listen to others’ viewpoints with an open mind and interest., Respect others’ ideas and try to understand the speaker’s perspective., Develop mutual trust among each other., Avoid being too formal with others (e.g., knowing the names of others will help in, addressing them by first names rather than using Mr/Ms; using I/you/we and active, voice rather than impersonal passive voice—‘Reena, I am unable to get your point., Could you please give some statistics and elaborate further?’)., Adopt a friendly attitude so that others put forth their ideas freely., Use body language effectively to convey interest and sincerity in the discussion., Avoid being friendly with only one or two participants in the group., Be objective and unbiased in the discussion., Allow others to speak., Recognize significant contributions by others and appreciate them., , Using Persuasive Strategies, Look at the following excerpt from a GD. Are the members persuasive?, Member 1:, Member 2:, Member 1:, Member 3:, Member 2:, Member 1:, , I feel that increasing the parking space is not advisable., Why do you feel so?, Increasing the parking space is not beneficial to anybody, and hence we need not go for that., I don’t think so., We have a lot of difficulty in parking. Hence, increasing the space will certainly be beneficial., I still feel that there is not much benefit., https://abdullahsurati.github.io/bscit
Page 195 :
188, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , We find that members of this discussion are not persuasive and the discussion does not, include any meaningful points. The members are not courteous and they do not use any evidence, to support their views., Our ability to make others believe in what we say is important in GDs. In other words,, mastering the art of persuasion or convincing others is crucial for GDs and the following tips, may be helpful in this regard:, • Do your homework and be knowledgeable about the topic of discussion., • Show maturity while reacting to others (by exhibiting appropriate body language and a, firm tone of voice; by not interrupting somebody abruptly)., • Listen carefully and then react., • Always use evidence (statistics/examples/testimonies) to justify your views., • Establish mutual respect., • Win the confidence of others., • Be considerate. We may have a strong view on some issue. However, if others give, evidences against these views, be willing to listen., • Always be friendly and respectful during GDs., , Being Polite and Firm, As already mentioned, we need to be assertive but not aggressive in a GD and by being firm, and polite we satisfy this requirement. When we feel that a particular idea suggested by another, member may not go well with the organization, we need to express our view firmly, but politely., There are various expressions that can be used to express politeness with firmness. See the, following sample expressions:, I understand that this idea may be liked by everybody. But, I am afraid it will not gel with our organizational, environment., I’m afraid this idea may not work in our system., Has this idea failed? I am afraid so., , (when we have to tell somebody something they may not like), , I wonder if I could have one more example on this point. (when asking somebody for a clarification), Could you repeat that please?, , Well, I am not convinced that the implementation of this idea is that urgent. / I am not sure about how urgent, the implementation is., I do not agree completely. Perhaps we should have more discussion on implementing this idea., , Turn-taking Strategies, Can I interrupt?, Would you mind me completing this idea?, Will you allow me to speak?, , These are some of the utterances you might have heard in a GD because the members would, not have used the turn-taking strategies effectively., In a well-managed GD, members participating actively take turns through spoken and nonverbal modes in a GD in order to express their views. On the other hand, if the discussion is, dominated by only one or two members, turn-taking is not used effectively. The term ‘turntaking’ refers to a speaker giving a chance to others to comment on or question the point raised, https://abdullahsurati.github.io/bscit
Page 196 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 189, , by him/her during a discussion. This process is repeated by the members, of a group and if it does not go smoothly, the discussion will not be useful, and can end up in an unpleasant argument., It is often noticed in GDs that there are members who are quick, thinkers, and hence would grab a turn to speak as soon as one of the others, completes speaking. There are others, generally ineffective listeners, who, may not allow anyone else to speak. On the other hand, there are members, who give verbal/non-verbal signals to others for taking their turn. The following three events, occur in turn-taking:, , The open and/or, subconscious behaviour, by which an exchange, of speaking turns is, accomplished is known as, a turn-taking mechanism., , Taking a turn Being ready to speak when one finishes is taking one’s turn. For instance, if you, respond to some member by agreeing, disagreeing, posing a query, or by paraphrasing what was, said, you are taking a turn., Holding the turn There may be members in a group who do not wish to give turns to others, to speak. They may like to keep the turn to themselves and continue further. Hence, they may, suppress their verbal and non-verbal cues that are used to tell others to take their turn. Though, they think that being able to dominate the discussion earns them points, they in fact lose by, coming across as bad listeners., Yielding the turn When we give cues to indicate that we are concluding our remarks and, others can take up the discussion further, we are yielding the turn., Assume that a group is discussing the details of a project it is going to take up during next, month. Given below are the statements spoken by some members during the course of this, discussion. Read them carefully to understand the turn-taking strategies explained above:, , Speaker 1: I don’t think we need to use the project management software for cost control of our Mobile, Medics project. The software is quite expensive and instead of procuring and using that we can think, of some other alternative. Do you agree? (By asking a question this speaker gives a verbal cue to others to, take their turn; he is yielding a turn. He may also use non-verbal cues such as stretching his hand to someone, particularly.), Speaker 2: I agree with you, but we should at least study the software available for project management. I’ve, heard about them. They are efficient, no doubt, but… (This speaker takes the turn but later on by pausing or, by uttering an incomplete statement, the speaker gives the turn to others.), Speaker 3: You mean to say they are expensive? I don’t think so. Some of my friends in other companies are, using XYZ software for managing most of their projects. They are able to manage their projects very well, in terms of planning, scheduling, resource allocation, cost control, issue tracking, etc. Such software may, be economical and hence we should also go for them. (In the beginning, even though the speaker asks a, question, he wants to hold the turn for himself and hence continues.), , The turn-taking process will yield good results when members have time to think before the, discussionas they may have gathered many ideas about the various issues related to the topic of, discussion. At times, groups are asked to go for an on-the-spot discussion of a topic. In such, cases, participants who can think fast can take turns while others may not be able to do so and, hence there may not be a well-balanced participation. These strategies can be used effectively by, responding to questions, by making a suggestion, initiating interaction, paraphrasing, requesting, the speaker to repeat, etc., , Effective Intervention, Interventions or interferences are necessary in a GD for reasons such as correcting an error,, controlling unruly behaviour, adding some detail, or asking a question for clarification. Generally,, https://abdullahsurati.github.io/bscit
Page 197 :
190, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , members do not like intervention during their speaking turn. So, we should interrupt somebody, only when there is a valid reason and also using appropriate phrases while doing so. If we do, not use polite expressions while interrupting a member, the person might get annoyed. It is, always better to use expressions such as excuse me, sorry to interrupt, may I say something, can I add, something, etc., before interrupting in order to avoid confusion and also to exhibit a decorum, during a GD. The following are some sample expressions for effective intervention:, Excuse me for interrupting you, but it is of two months’ duration, not one month., May I interrupt? Let me correct the time frame. It is two months and not one month., I would like to say something, if I may. The duration is two months and not one month., Can I just say that the duration is two months and not one?, Sorry to barge in… but this idea has already been discussed., Can I add here that the duration also needs to be considered along with other factors?, May I ask you a question at this point?, , Reaching a Decision, Most of the GDs end with a decision—either final or interim. Whatever the type of decision, it can, be arrived at only when members participate actively to explore the topic, contribute significantly, to the discussion, and reach a consensus or an agreement. After thoroughly discussing various, points involved in a problem by analysing their pros and cons, the group finally arrives at a few, solutions. After ranking the solutions by considering their feasibility or practicability in their, organizational environment, the members will accept one solution. When they decide on this, it, will be presented by the leader of the group to everybody. However, before presenting the solution,, the speaker will summarize the main points of discussion keeping in mind the goal of the GD., At times, because of various constraints such as time, inadequate participation, preparation, etc.,, the group may not be able to decide upon the given issue and it may decide to meet again. In such, cases, some interim or tentative decisions may be taken. For instance, if the administrative heads, of a college discuss a revamping of the curriculum, they may not arrive at a final decision, but may, be able to take decisions on certain courses. They may continue their discussion later., There are two main categories of GDs, namely organizational GDs and GDs as a part of a, selection process. We will discuss these two formats in the following sections. Also, go through, the PowerPoint presentation on group discussions in the CD to understand the various issues, involved in a GD., , ORGANIZATIONAL GD, In organizations, GDs are mainly used for group decision-making. Members of the interacting, group take the responsibility of explaining their ideas and arriving at a consensus. GDs can help, reduce many problems inherent to traditional interactive groups. The word ‘traditional’ here, refers to an organizational set-up wherein hierarchy is given considerable importance. In such, organizations, the group decision-making process may involve groupthink. A team suffering, from groupthink will place so much value on maintaining loyalty, unity, and agreement that, critical thinking and open enquiry are prevented. The participants may censor themselves and, pressurize other group members into agreement. In order to minimize this, the following, techniques may be used:, • Brainstorming, • Nominal group technique, , • Delphi technique, , https://abdullahsurati.github.io/bscit
Page 198 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 191, , Brainstorming, Brainstorming is a method for generating a variety of ideas and perspectives. It is as uncritical as, possible because criticism inhibits the free flow of ideas. The people involved in brainstorming, should ideally come from a wide range of disciplines and have divergent social and cultural, backgrounds. The more diverse the group, the more likely it is to generate unexpected insights,, ideas, and connections, and hence even unthought-of and novel solutions to problems. A typical, brainstorming session follows the steps given below:, • A group of six to twelve people sit around a table., • The group leader states the problem in a clear manner so that all participants understand it., • Members then suggest as many alternatives as they can in a given length of time and, write them down on a blackboard, whiteboard, flip chart, or a piece of paper., • No criticism is allowed, and all the alternatives are recorded for later discussion and analysis., , There are two types of brainstorming techniques:, 1. Storyboarding, 2. Lotus blossom, In storyboarding, participants identify major issues and brainstorm on each of them. It, is often used to solve complex problems. In the lotus blossom technique, a core thought is, presented and participants provide eight ideas surrounding it like the petals of a lotus blossom., Then each of these ideas becomes a core thought to be surrounded by a further set of eight ideas, and so forth, until participants can no longer generate ideas or until decision-makers feel that, they have a good grasp of the problem and potential creative solutions., However, brainstorming is mainly a process for generating ideas. The other two techniques—, the nominal group technique and the Delphi technique—go further by offering methods to, actually arrive at a suitable solution., , Nominal Group Technique, The nominal group technique restricts discussion or interpersonal communication during the, decision-making process and hence the term ‘nominal group’. In other words, in this technique,, although group members are all physically present as in a traditional committee meeting, they, operate independently, as described below. The problem is presented and then the following, steps take place:, • Members meet as a group, but before any discussion takes place, each member, independently and silently writes down his/her ideas on the problem., • Each member takes his/her, going around the table and presenting a single idea until, all ideas have been presented and recorded (typically on a flip chart or chalkboard). No, discussion takes place until all ideas have been recorded., • The group now discusses the ideas for clarity and evaluates them., • Each group member silently and independently rank-orders the ideas., , The final decision is determined by the idea with the highest aggregate ranking. The chief, advantage of the nominal group technique is that it permits the group to meet formally but, does not restrict independent thinking, which an interacting group might do., , Delphi Technique, The Delphi technique is a more complex and time-consuming alternative in group decisionmaking. It is similar to the nominal group technique except that it does not require the physical, https://abdullahsurati.github.io/bscit
Page 199 :
192, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , , , , , , , , , presence of the group members. In fact, this technique never allows the group members to meet, face to face. The following steps characterize the Delphi technique:, , 1. The problem is identified and members are asked to provide potential solutions through, a series of carefully designed questionnaires., 2. Each member anonymously and independently completes the first questionnaire., 3. The results of the first questionnaire are compiled at a central location, transcribed, and, reproduced., 4. Each member receives a copy of the results., 5. Based on the results, another questionnaire is prepared, and the members are again, asked for their solutions, as the compiled results typically trigger new solutions or cause, changes in the original opinion., 6. Steps 4 and 5 are repeated as often as necessary until consensus is reached., , Like the nominal group technique, the Delphi technique insulates group members from, the undue influence of others. As it does not require the physical presence of the participants,, the Delphi technique can be used for decision-making in geographically scattered groups. For, instance, a company having branches in Tokyo, Brussels, Paris, London, New York, Toronto,, Rio de Janeiro, and Melbourne can use the technique effectively to query its managers on the, best global price for one of its products. By following this technique, business enterprises can, avoid the cost of bringing their executives together at a central location., The Delphi technique also has its drawbacks. As the method is extremely time consuming,, it is frequently not applicable when a speedy decision is required. Additionally, the method, may not develop the rich array of alternatives that the brainstorming or the nominal group, technique does. Ideas that might be inspired by face-to-face interactions may never come up., An organization can decide upon the type of GD required mainly on the basis of availability, of time, urgency of the situation, location of the group members, and the complexity of the, decision to be made., , GD AS PART OF SELECTION PROCESS, A group discussion conducted for the selection of candidates for a job or for admission to a, professional institution is a well-formulated tool for judging the personality of candidates, their, communication skills, knowledge, and their ability to work as a team., The group discussion is an important aspect of the recruitment process, especially for management, trainees and executive positions. Employers look for candidates who have the potential to shoulder, responsibility, work in a team, and also provide leadership. Hence, the objective of a selection GD, is mainly to evaluate an individual’s team-playing skills. As a team leader, one would be working, with people. In such a setting, an independent or isolated worker approach does not always work., We have to understand the other person’s point of view while making our point and ensure that, the team as a whole reaches a solution or agreement that is both feasible and acceptable to all team, members. To this end, the GD is a simulated managerial setting. Most GDs for selection purposes, assess individual traits, group behaviour, and leadership qualities., In the following sections, we will study the characteristics, evaluation, and analysis of group, discussions, as well as understand how one should approach such discussions., , Characteristics, Typically, in GDs conducted for recruitment, candidates are given a topic or case for discussion., Normally groups of 8–10 candidates are formed into a leaderless group and are given a specific, https://abdullahsurati.github.io/bscit
Page 200 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 193, , situation to analyse and discuss within a given time limit of about 30 minutes. They may be, given a case study and asked to come up with a solution or they may be given a topic and asked, to discuss it meaningfully., Depending upon the infrastructure at the venue, the group is asked to sit in a circular,, rectangular, or U-shaped arrangement. The group members may either choose their seats or be, asked to take the seats allotted by the selection panel. This panel, which normally comprises the, technical executives and human resources executives of the company, will observe and evaluate, the members of the group. The rules of the GD—time limit, panel’s expectations, etc.—are, explained after the initial introduction of the panel to the participants. Thereafter, the panel, assigns to the group the topic or case to be discussed, and observes the discussion either directly, or from behind a screen., The panel may, at its discretion, provide the group some time for thinking over the topic or, case. Thereafter, upon directions from the panel, the discussion starts and carries on till they, signal the termination time. Each candidate is supposed to voice his/her opinion and offer, supporting and counter arguments as required. Although the panel specifies an approximate, time for the GD, it may cut short or extend the time at will., , Evaluation and Analysis, The four components generally evaluated and analysed in a GD are as follows:, • Knowledge, • Communication skills, , • Group behaviour (team spirit), • Leadership skills, , Knowledge, The depth and range of knowledge as well as analytical and organizational abilities of the, candidate are judged. One should be able to grasp the situation and analyse it not just at a, mundane level, but with a wide perspective. For instance, assume that the participants are asked, to discuss the topic ‘All tests and examinations should be abolished from the university education, system’. Whatever be their stand, they should discuss not only the benefits or problems at their, own institutions, but also those at the national and international levels. This approach will give, a wider scope for the topic to develop and become more interesting. As a member of the group,, one is expected to contribute substantially to the discussion., The originality of ideas, knowledge and initiative, and approach to the topic or case contribute, to one’s success in the GD. Some knowledge of the topic concerned, supported by common, sense, could win us laurels. The greater our knowledge of the subject, the more interested,, enthusiastic, and confident we will be, the more fluent and forceful our contribution to the, discussion will be. Of course, the contribution must be relevant, rational, convincing, and, above, all, interesting and appealing to the selection panel. It is futile to beat about the bush or limit, oneself to a particular perspective., , Aspects of Group Behaviour in a Group Discussion, • Consistency in participation, • Keenness in listening and observing, • Time sharing and orderly conduct, , • Ability to handle turbulent situations, • Ability to cut excessively exuberant participants, down to size, , https://abdullahsurati.github.io/bscit
Page 201 :
194, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Being well-versed with the topic or understanding the case study well and being able to, conceptualize it adequately will aid in taking the initiative. In other words, if we are able to, form a concept or an idea of the given topic, it establishes the comfort level required to come, up with many points for discussion. A lack of ability to take up an initiative may lead to a loss of, opportunity to speak. Once the topic or problem is understood, it is easier to generate ideas as, well as to organize them so that it is clear to all fellow participants. Take a look at GD Situation, 1 in the CD to understand how to initiate a group discussion and make a good impression on, the panel., One of the key skills looked for in any profession is problem solving. In a GD, it is vital to be, creative and to come up with divergent and offbeat solutions. Do not be afraid to propose novel, solutions. This is a high-risk, high-return strategy. Remember that we are evaluated on how we, think and not what we think. GD Situation 9 in the CD demonstrates this point., , Communication skills, During a GD, an individual’s skills will be assessed in terms of the following:, • Active listening, , • Clarity of thought and expression, , • Appropriate language, , • Appropriateness of body language, Active listening Listening is as important as speaking in a GD. Unless we listen to others,, we may not be able to continue the discussion in the right direction. As participants are, interdependent in a GD, it is extremely necessary to listen very carefully. Only then will we be, able to pick up the thread of discussion and continue. It is easy for the selection panel to identify, poor listeners as their discussion lacks continuity. The selection panel may also pose questions at, the end of the discussion to find out whether group members have been good listeners., Clarity of expression The panel’s perception of a candidate’s personality and his/her ability, to influence and convince others depends considerably on the correct use of tone, voice, and, articulation. It is not sufficient to have ideas. They have to be expressed effectively. More than, words, it is the tone in which they are spoken that conveys the right message. For example,, a tone that orders is abrasive and may hurt the listeners’ self-esteem. Hence, it is essential to, cultivate an appropriate tone. Similarly, a lively and cheerful voice with appropriate modulations, is likely to be appreciated., Clarity of speech, achieved through phonetic accuracy, is very important. In addition, fluency of, speech and good delivery are also expected. Slang, jargon, and an artificial accent are to be avoided, in a GD. Given below is a brief list of the aspects of oral communication, The importance of listening, that we have to be aware of and develop to our fullest potential in order to, Listening is a neglected, be a successful communicator:, skill. Good listening is, difficult because we are, usually more eager to state, our own views than to, pay attention to the views, of others. When there is, a difference of opinion,, it is important to remain, bjective by doing away, with prejudices., , • Tone: Quality or character of the voice expressing a particular feeling, or mood, • Voice: Correct projection of voice, • Articulation: Act of speaking or expressing an idea in words, • Fluency: Speaking or writing in an easy, flowing style, • Modulation: Variations in tone or volume of voice, • Good delivery: Ideas expressed fluently in the right voice, right tone, and, right articulation, https://abdullahsurati.github.io/bscit
Page 202 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 195, , Some Useful Tips for the Effective Use of Body Language, • Look keenly at the speaker and nod your head to, reveal that you are listening actively., • When you speak, make sure that you do not, ignore any of your group members. Try to look, at everybody., , • Avoid overt gestures., • Avoid pointing out fingers or raising your hands, while speaking., , Apt language The language used should be accurate and free of grammatical errors. However,, in case of an accidental grammatical error, do not pause to correct yourself because this might, give others an opportunity to seize the discussion from you. The language used should be direct,, clear, and precise, with the ideas flowing in an organized manner., Do not use long, winding sentences. Rather, try to keep the language simple and unambiguous., Do not use jargon that everyone in the group may not be familiar with, as it may lead to a lack, of clarity. Moreover, extensive use of jargon, high-sounding words, or ambiguous expressions, may project the individual as a show-off and will certainly not endear the person to the group, members. Remember, complication does not create impact, content does! Our main objective, must be to create an impact in a positive manner., Appropriate body language The scores in a GD depend not only on verbal communication, skills, but also on non-verbal skills. Our body language says a lot about us. Our gestures and, mannerisms are more likely to reflect our attitude than what we say. Panelists keenly observe, the body language of the candidates and give due weightage to this aspect in their assessment, of candidates., Emotions such as anger, irritation, frustration, warmth, excitement, boredom, defensiveness,, and competitiveness are all conveyed through body language. The selection panel observes an, individuals’s appearance, frequency of eye contact, postures, gestures, and facial expressions., A candidate who appears professional (i.e., not too overbearing) is more likely to be noticed, favourably by the panel. A confident posture, appropriate facial expressions, and meaningful eye, contact with other members will create a positive impression., It is important to take care of our appearance and try to be as natural as possible. In order, to appear self-confident, we must practise well so as to send the appropriate non-verbal signals, during a GD. GD Situation 4 in the CD demonstrates the use of positive body language when, discussing over a matter that one feels very strongly about., , Group behaviour (team spirit), An individual’s group behaviour is reflected in his/her ability to interact with other members of, the group on brief acquaintance. Emotional maturity and balance promotes good interpersonal, relationships. You are expected to be more people-centric and less egocentric. For example,, when someone provokes us with a personal comment, do we keep our cool or do we react with, anger? Does our behaviour come across as objective, empathetic, and non-threatening? These, are the traits of a good team player., Participating in a GD involves coordination and cooperation among the various members., The selection panel notes the differences in the amount of participation by members. There, may be members who participate more and members who participate less. Some members, may exhibit a shift in participation. That is, initially they might participate very actively, but, https://abdullahsurati.github.io/bscit
Page 203 :
196, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , as the discussion proceeds, they might keep quiet, or vice versa. Further, the panelists observe, how the silent members are treated, who talks to whom, who keeps the ball rolling, etc. The, successful candidate is the one who shows an active interest in the proceedings by being involved, throughout the GD. Our success in a GD depends on how well we play the role of an initiator,, informer, illustrator, leader, coordinator, and moderator. The ideal candidate will share time with, others, listen, and react to their views. Hence, a good communicator is one who opens, rather, than closes gates., The ability to analyse a problem and persuade others to see it from multiple perspectives, without offending group members is an important trait of a good communicator. While, appreciating others’ points of view, we should be able to effectively communicate our own, view without obviously contradicting others’ opinions. Also, do not speak just for the sake of, doing so. Try to build up an argument from the point where the last speaker left. In case of a, disagreement with what the predecessor just said, by all means feel free to disagree, but do so, in a modest and amicable manner. We might benefit from keeping some facts ready to justify, our point. A group can be persuaded by using valid arguments and appropriate verbal and nonverbal means of communication. The ability to convince others is an important trait during a, GD. GD Situations 2, 3, and 6 in the CD, respectively, demonstrate how to be assertive instead, of being aggressive, how to disagree amicably, and how to express agreement., , Leadership skills, The success of any team depends, to a large extent, on its leader. A group cannot carry on, its assigned work effectively without a leader. Although there is no appointed leader in a, recruitment GD, a leader usually emerges as the discussion proceeds., The candidate who possesses both functional and coordinating abilities, ‘Leadership is action, not, position.’, will emerge as the leader. Functional ability involves knowledge, mental, –Donald H. McGannan, and physical energy, emotional stability, objectivity, communication skill,, integrity, and emotional intelligence., Coordinating ability involves traits such as group adaptability and group motivation. Group, adaptability means the ability to adjust with other individuals in the group, and to serve as, a cohesive force that binds the group into a single unit rather than a collection of people., Group motivation means the ability to motivate and influence others, to bring out the best, participation from the members, and to nurture cooperation, understanding, and team spirit, among the team members., Hence, leadership means influencing the proceedings by constructive participation, rational, arguments, convincing other participants of a particular point of view, building support by, working with supporters in the group, logically weakening the opponent’s point of view, etc., The selection panel observes the leadership style during the GD. Some leaders are authoritative, in nature. They attempt to impose their will or values on the other group members or try to, push them into supporting their decisions. They also pass judgement on other members and their, views. Further, they block action when it is not moving in the direction they desire. Some leaders, are amiable. They consistently try to avoid conflict or unpleasant feelings from being expressed, and always try to maintain a peaceful environment during the GD. There is yet another type of, leader who follows a democratic style. Such leaders try to include everyone in the discussion and, express their feelings and opinions openly and directly without judging others. When there is a, conflict, they try to deal with it as a problem-solving exercise. Obviously, the selection panel would, prefer the democratic leader. Leaders should also know how to handle hostility and deal with the, ‘bulldozers’, individuals who are high on lung power and low on logic., https://abdullahsurati.github.io/bscit
Page 204 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 197, , A leader should be able to control the occasional fish-market environment that might arise, during a GD. He/she should also be able to restrain exuberant speakers if they deviate from, the topic or if they try to dominate the discussion without allowing others to speak. Further,, the leader should try to include everybody in the discussion. GD Situation 5 in the CD, demonstrates desired leadership behaviour., , Approach to Topics and Case Studies, When a topic is presented for a GD, take a minute or two to think about the topic with an, open mind and note down the major issues that come to mind. Do not jump to any conclusions., Instead, arrive at a stand after examining all the issues in a balanced manner. Only then begin, to speak., While speaking, outline the major issues first and then state your stand. That is, give the, justification first and the stand later. If we state our stand first, chances are that participants, who disagree with our stand will interrupt to contradict before we can elaborate on the reasons., In this situation, the evaluator will only get an impression of what we think and not how we, think. The guidelines given below will be helpful to handle topic-based as well as case studybased GDs., , GDs based on a topic, Topic-based GDs are generally more difficult to handle than case study-based ones as there is, no starting point for a candidate’s thought process, particularly when the topic is unfamiliar., The panel may or may not allow time for thinking. The dynamics in the first couple of minutes, are generally chaotic. Ideally, to start with, some ideas have to be generated on the topic. These, ideas must then be prioritized so that the presentation is coherent. At this point, there may not, be much time to fully develop the ideas., In order to pre-empt the possibility of other participants starting off first on the same ideas, that we have thought of, we have to start speaking as early as possible. Not only must we, develop the idea as we speak, but also think ahead for subsequent ideas. A weakness in any of, these steps will lead to poor presentation., As a rule of thumb, we should not speak unless we have content for a speech of at least one, minute. Second, listening carefully to what the other participants have to say will trigger fresh, ideas. A healthy discussion can take place only when there is an exchange of ideas and these, ideas are subjected to analysis. Therefore, it is not necessary to keep on generating new ideas for, the entire duration. It is also important to carefully examine each word of the topic, noting it, down if possible, and checking that there are no words that can have different interpretations., If some ambiguity exists, it makes sense to define the terms first. GD Situation 8 in the CD, demonstrates how one can deal with an unfamiliar topic., GDs based on a case study, If an individual’s analytical skills are good, then case studies are easier to handle than topicbased GDs, because there is a starting point in the form of a particular situation. Cases are, discussions of situations (in business or other organizations) calling for an appraisal of past, action, a decision on future action, or both. Virtually every case calls for both analysis and, decision-making. Logical analysis and a firm grasp of the facts are crucial. Judgement is needed, to sift through available information and find the relevant facts, and so is imagination for, developing an action plan., https://abdullahsurati.github.io/bscit
Page 205 :
198, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Tips for Success in GDs, The following is a list of tips for handling a GD, successfully., • Be thorough with current issues., • Always enter the room with a piece of paper and, a pen., • Listen to the topic carefully., • Jot down as many ideas as possible in the first, few minutes., • Try to dissect the topic and explore the, underlying causes or consequences., • Organize the ideas before speaking., • Speaking first is a high-risk, high-return strategy., Hence, speak first only if there is something, sensible and substantial to say., • Try to contribute meaningfully and significantly, every time you speak. Do not speak just for the, sake of saying something., • Identify supporters and opponents and allow, the supporters to augment your ideas., • Keep track of time and share time fairly., • Have an open mind and listen to others’ views., , • Maintain eye contact while speaking and, listening., • Do not indulge in parallel conversations., • Use tact and wit. If you must use humour, do so, judiciously so as not to hurt others or deviate, from the topic., • Display a spirit of cooperation and an, accommodative nature., • Draw out the silent members and encourage, them to speak., • If things get chaotic, take the initiative to restore, order by providing a fresh direction to the, discussion., • Attempt to arrive at a consensus although the, ultimate aim is to reach a conclusion. Within the, specified time, the group may not be able to, arrive at a consensus. However, working towards, consensus will reveal the individual’s capability, and inclination towards being a good team, player. GD Situation 10 in the CD demonstrates, how to effectively conclude a group discussion., , A framework for a case analysis is provided below to ensure that the process is as orderly as, possible., •, •, •, •, •, •, , Understand the situation from different viewpoints., Work out alternative courses of action., Explore the pros and cons of each alternative., Make a decision., Work out an implementation plan., Work out a contingency plan to be used in case the first implementation fails., , In real life, the success or failure of any decision cannot be forecast. What can certainly be, done is to have a logical decision-making process and a practical implementation plan., , MEETINGS, Meetings are an important facet of corporate life. A group of people performing different, functions in an organization may come together during a meeting to work on a specific project., Major projects demand that knowledge and expertise from several sources be pooled for successful, implementation. With the massive organizational, technological, and social changes taking place,, there is an ever greater need for people in an organization to cooperate and share knowledge., Meetings also serve as vehicles for individual advancement and organizational achievement., They act as a showcase for managerial talent, a forum in which employees get to audition, before peers and senior management. They give participants an excellent opportunity to become, opinion leaders in their organization, irrespective of their position in the hierarchy., https://abdullahsurati.github.io/bscit
Page 206 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 199, , Beyond serving the professional, purposes of individuals and organizations,, meetings fulfil a more fundamental human, need for socializing and communicating., They help employees to bond with one, another and communicate the values of, the organization, letting the employees, know what behaviour is allowed and what, is considered unacceptable. They reflect the, organizational culture., However, meetings are often poorly, conducted, with many people considering, them a waste of time. Due to a lack of, ‘The major problem appears to be the lack of proper direction.’, open communication among members,, poor chairing of meetings, and ineffective, use of time, the opportunity for people to share their knowledge and expertise and interact, productively is lost., Above all, meetings, if effectively managed, can become a potentially powerful tool for, transforming the organization. This section discusses the purposes of meetings, proceeds to, discuss the preparatory steps for a meeting, and finally presents an assessment form for gauging, the effectiveness of a business meeting., , Purposes, Every meeting is called for a purpose and it is this purpose that decides the form of the meeting., In general, the purpose of a meeting is either informational or decision-making., An informational meeting is called so because the participants share information and, possibly coordinate action. This involves individual briefings by each participant or a speech by, the leader, followed by questions from the participants. Examples of meetings for informational, purposes:, • To communicate important or sensitive information (e.g., to inform about the rejection, of a major proposal), • To explore new ideas and concepts (e.g., to bring in a change in the work pattern), • To provide feedback (e.g., to share the employees’ reaction to a newly introduced bonus, scheme), • To present a report (e.g., accounts for the year’s board meeting), • To gain support for an idea or project (e.g., about the new product designed by the, research division), , Meetings and group, discussions should not fall, into the trap described, by the person who said,, ‘A committee is a group, of the unwilling, chosen, from the unfit, to do the, unnecessary., , Decision-making meetings are mainly concerned with persuasion,, analysis, and problem solving. They often include a brainstorming session,, which is followed by a debate on the alternatives. Examples of meetings, for decision-making purposes:, •, •, •, •, , To reach a group decision (e.g., to decide promotions for employees), To solve a problem (e.g., emergency meetings to solve crisis), To reconcile a conflict (e.g., to decide strategies), To negotiate an agreement (e.g., to decide the course of action before, the actual negotiation), https://abdullahsurati.github.io/bscit
Page 207 :
200, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • To win acceptance for a new idea, plan, or system (e.g., to explain the benefits of a new, scheme to convince others), , Meetings can serve many other purposes. For example, they can be used to build morale,, confer awards or recognition, plan projects and strategies, or provide training to employees,, suppliers, and customers. The common denominator in any meeting is the group. If there is a, clear need for a group of people to assemble, a meeting is called for., , Preparation, Before you call a meeting, ask yourself the following questions:, • Is this meeting necessary?, • What is my objective?, , • Is the timing right?, • How much will the meeting cost?, , • Time, • Duration, • Meeting notice and agenda, , • Participants, • Venue and set-up, , If you have decided to call a meeting, then determine the following:, , Time, If a meeting is initiated by a crisis or an emergency, there may not be much choice in terms of, scheduling. However, whenever possible, carefully consider the timing of a meeting because it, can have a significant impact on the outcome. Given below are some scheduling guidelines:, , • Choose a time during which participants are at their best., , Do not call a meeting on Monday mornings or Friday afternoons when participants are, likely to have little motivation. Do not schedule a meeting for the hour immediately, after lunch when most people feel lethargic., • Start at an unusual time and end at a natural break point., , There is no law that says a meeting must start on the hour or half hour. If you select an, unusual starting time, participants are more likely to show up punctually, especially if the, meeting is scheduled to end at a natural break point, such as lunch or the close of the, workday., • Allow ample time for preparation., , Make sure that participants have sufficient time to prepare. This will vary according to, the nature of the meeting. The longer or more involved the meeting, the more the time, required to prepare the related materials., • Avoid surprise meetings., Nobody appreciates a surprise meeting. On-the-spot meetings interrupt the flow of the, workday and allow people insufficient time to prepare, resulting in most participants, entering the meeting room with a negative attitude., , The Four Ws, Successful, constructive meetings take place as a result of careful preparation. When preparing for a, meeting, keep these crucial aims always in mind., • Why is the meeting being held?, • Where should the meeting be held?, • Who should be present?, • When should the meeting take place?, https://abdullahsurati.github.io/bscit
Page 208 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 201, , Duration, The appropriate length for a meeting depends on the type of meeting and on the number,, complexity, and sensitivity of the agenda items. The more complex or controversial the items,, the fewer that can be addressed in a given time period. If there are more topics than can be, effectively covered in a single meeting, schedule a second meeting rather than trying to cram, too much information into the first., The greater the number of participants, the shorter the meeting should be. In a small meeting,, a higher level of interaction is possible. In a large meeting, interaction is restricted, and it is, more difficult to maintain interest. Five people working on a problem may be absorbed for, hours, five hundred people listening to a lecture can become distracted within minutes. When, scheduling long meetings, allow sufficient time for breaks. For all-day meetings, allow at least, an hour for lunch, but preferably an hour and a half or two hours. This gives participants time, to recover from post-lunch fatigue and ensures more productive afternoon sessions., Meeting notice and agenda, It is important to inform the participants well in advance about the, meeting so that they can attend and contribute significantly to the, An agenda is the list of, individual items that ensure, meeting. This can be done by the following:, that the meeting achieves its, • Circulating a printed notice, • Sending an email, broad aims., • Informing participants over telephone, Few traditional organizations still follow the old method of circulating a printed notice, and getting the signature of all participants, but the other two methods are widely followed, today. When a meeting requires only internal participants, they can be informed through, internal telephone lines. However, we must ensure that somebody at the other end receives the, information if the particular person is not available at that time. Circulating the information by, email is the other alternative. Any notice needs to include the following details:, • Date on which the notice is sent, • Details regarding the purpose (why); date, day, time (when); venue (where) of the, meeting, • List of agenda items (what business is to be transacted), • Signature, • Recipients (who), , A written agenda, which is the list of the individual items that need, to be discussed in the meeting, should also be included with the notice., It is the single best predictor of a successful meeting. The agenda keeps, the meeting on course and helps to ensure that the stated objectives are, accomplished. It also serves as a planning tool for participants and a, control tool for the leader. With the meeting objectives clearly defined,, –Robert Copeland, an agenda can be developed, keeping the following guidelines in mind:, • Limit the number of agenda items., Focus on a few critical items—three to six is a good rule of thumb. Separate the ‘need, to know’ from the ‘nice to know’ and include only the former. The remaining topics can be, summarized and included with the agenda as supplementary material or held back for a future, meeting. Also determine the order in which items will be discussed, arranging them logically., • Do not dwell on the past., , ‘To get something done, a, committee should consist, of no more than three, men, two of whom are, absent.’, , https://abdullahsurati.github.io/bscit
Page 209 :
202, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , If a meeting is to be productive, it must focus on actions and decisions that will affect the, future. The meeting agenda should reflect this future orientation., • Present opportunities, not problems., Keep the agenda upbeat. Instead of focusing on problems, recast them as opportunities., Every problem represents an opportunity of some kind—to improve a process or prevent a, future problem, for example. If a problem is presented in this light, there is a better chance that, it will be resolved., • Allocate ample time., An agenda should be well-organized, but not so rigid that it inhibits creativity or discourages, full participation. Allocate some extra time for questions, creative discussion, etc., • Include sufficient detail., An agenda item should give participants the specific information they need in order to, prepare for the meeting. It should enable them to understand exactly what is to be accomplished., For example, the agenda item ‘advertising budget’ may receive a more positive response if put, across as ‘allocate the advertising budget among direct mail, print, radio, and television’. With, this level of information, participants can gather the appropriate data for the meeting and, prepare their arguments for or against each advertising medium., , • Include the following details in an agenda: name of the organization, department/, committee; first or follow-up meeting (this helps in maintaining a record); date, time,, venue; items to be discussed, • If possible, email the agenda along with the meeting notice to participants a week before, the meeting. The more the preparation required for the meeting, the earlier the agenda, should be sent out., • If the agenda has less number of items, it can be included in the meeting notice itself., Otherwise, the agenda has to be circulated separately., , Exhibit 9.1 is a sample meeting notice that includes an agenda containing five items., , EXHIBIT 9.1, , Sample meeting notice and agenda, Jupiter Group of Hotels Management Committee, , 23 March 2015, You are invited to attend the fifth meeting of the Management Committee, of Jupiter Group of Hotels to be held at 6 p.m. on Wednesday, 29 March, 2015, in the Venus Hall, 58, Park Avenue, New Delhi–110 005., Agenda, 5.01 Minutes of the last meeting, 5.02 Recruitment of management trainees, 5.03 Opening a branch in Nagpur, 5.04 Innovations in travel packages, 5.05 Any other matter, (Vivek Pai), Secretary, , https://abdullahsurati.github.io/bscit
Page 210 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 203, , TABLE 9.4 Optimal meeting size, , Meeting type, , Maximum no. of participants, , Problem solving, , 3–5, , Decision-making, , 6–10, , Problem identification, , 6–10, , Informational, , 20–30, , Review or presentation, , 20–30, , Motivational, , No limit, , Identify the Right People to Attend a Meeting, • Those who have enough knowledge of the, subject to make a meaningful contribution to, the meeting, • Those with the power to take decisions or, approve projects, , • Those responsible for implementing decisions, made in the meeting, • Those who will be affected by the decisions, made, or their representatives, , Participants, One of the primary causes of unproductive meetings is not having the right people in, attendance. An invitation to a meeting should always be based on purpose rather than on, politics. In addition to inviting the right people, it is important to invite the right/optimum, number according to the type of meeting. See Table 9.4., Venue and set-up, ‘Where’ people meet is as crucial as ‘why’ and ‘when’. The choice of a meeting room has a, significant impact on the overall quality of the meeting. Among other things, a meeting room, can enhance or inhibit productivity, encourage or discourage communication, promote or stifle, creativity, and make participants feel relaxed or tense. As the meeting room plays such an, important role in meeting productivity, it is important to take great care in its selection and setup. The following aspects of a conference room need to be considered in this regard:, , • Size, • Storage space, • Projection screens, , • Lighting, • Chairs, • Other amenities, , • Ventilation, • Sound system, • Special needs, , • Acoustics, • Distractions, , • Electrical outlets, • Presentation equipment, Once the venue is decided, whether it is within the company premises or outside, it must be, reserved early enough. In case the selected venue is not available, locate a similar site or consider, postponing the meeting. The type of meeting affects not only the choice of the meeting room, but also how it is set. Given below are some suggested layouts to improve access, heighten, interaction, and increase visual contact:, Boardroom style, Figure 9.1., , This style is suitable for most meetings that involve sitting around a table. See, https://abdullahsurati.github.io/bscit
Page 211 :
204, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , FIGURE 9.1 Boardroom style seating, , FIGURE 9.2 Conference style seating, , Conference or theatre style This style is suitable for annual general body meetings, or any other, meetings that involve a large number of participants, presentation, and a question-and-answer, session. See Figure 9.2., A less formal layout is more appropriate for informal meetings. Consider eliminating tables, altogether and sitting ‘in the round’. However, please remember to provide some form of surface, for placing laptops or notebooks for the participants and the person taking down the minutes., A popular form of current office layout is to have a ‘teardrop’ (Figure. 9.3) end to a standard, desk around which two or three chairs can be placed, providing the meeting area., , Procedure—Conducting Effective Meetings, The quality of a meeting is largely determined by how well the players act out their roles. By, playing the three primary roles of leader, facilitator, and participant, the chairperson can direct, the meeting towards achieving its specified goal. Listed below are the responsibilities of the, chairperson towards making a meeting effective:, • Getting the meeting off to a good start, • Managing conflict, • Encouraging participation, •, •, •, •, •, •, •, •, , Injecting humour, Drawing silent types into the discussion, Ending the meeting, Joining the discussion, Preparing and finalizing the minutes, Managing emotions, Evaluating the meeting, Dealing with latecomers, , Getting the meeting off to a good start The, chairperson/leader must establish control of the, meeting from the start by setting the tone and, stating the ground rules and objectives. A brief, orientation speech by the chairperson can get rid, FIGURE 9.3 Teardrop extension to the meeting table of the needless talk that typically occurs at the, https://abdullahsurati.github.io/bscit
Page 212 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 205, , T–1–s Approach to Introductions, 1. Introduce the Topic the speaker will address., 2. Clarify why the topic is of Interest or value to the, group present at the meeting., , 3. Explain why the Speaker is qualified to address, this topic., , start of the meeting. The chairperson must set up the meeting, state the problems and the, general objectives and procedures, provide the relevant information base for the discussion, and, note the boundaries and constraints of the discussion., Encouraging participation Encouraging participation is one of the leader’s main obligations., Unfortunately, not all meeting leaders know how to go about this. Here are some tips for, encouraging participation in a meeting:, •, •, •, •, •, •, •, •, •, •, , Do not monopolize the discussion., Do not exhibit verbal or non-verbal disapproval of ideas even if you disagree with them., Ask open-ended questions to stimulate discussion., Frame problems in positive terms (e.g., ‘How can we achieve our goal?’ rather than ‘Is it, possible to achieve our goal?’)., Identify the introverts and make a point of asking for their input., Do not let extroverts monopolize the discussion., Control participation by reminding people of the purpose of the meeting and by bringing, discussions to a meaningful end. Sometimes, it is necessary to remind participants of the, time, so that we can move on to the next topic., Recognize differences in individual styles., Change the seating arrangement (based on the previous experience)., Rotate leadership., , Drawing silent types into the discussion Silence can be divided into three categories:, • Silence of general agreement and no contribution, • Silence of diffidence, • Silence of hostility, , Among these three categories, the first type is not of much concern; however, the other, two may be a cause for disquiet. In the case of diffidence, the leader should gently bring the, participant into the discussion and make it clear that the person’s input is valuable. The silence, of hostility signals that a person is detached from the whole proceedings and usually indicates, that the person is experiencing some feeling of disrespect or humiliation. The chairman should, try to get to the root of the problem and encourage participation., Joining the discussion In most cases, it is better for the leader to stay out of the discussion and, remain in the neutral, facilitative role. If the leader wants to advocate a point, it is best for him or, her to do so later in the discussion, when others have introduced the point, so as not to unduly, influence the group’s thinking. However, there is an exception: if the leader has relevant knowledge, or experience, the group may feel the leader is obliged to share it with, ‘Where all think alike, then, them. He/she cannot remain aloof from the proceedings as an impartial, no one thinks very much.’, moderator, but can show himself/herself to be a fair-minded, even-handed, –Walter Lippmann, participant who contributes significantly for the common good., https://abdullahsurati.github.io/bscit
Page 213 :
206, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , Managing emotions The meeting leader should be conscious of not only the written agenda, of the meeting but also the hidden and emotional agenda of the participants. The term ‘hidden, agenda’ refers to the unspoken motives and aspirations of the group members, which could, often conflict with the main goals of the group. Hidden agenda indicates what people really, want as against what they say they want., The leader should realize that meetings also have the goal of creating and maintaining, positive emotions that promote working together effectively. This does not mean that the leader, should ignore negative emotions. A person’s anger over a budget cut, for example, may be a, legitimate expression of concern. By exploring the reasons behind the anger, the leader can, work with the group to address the problem productively. Acknowledging the existence of, these emotions and creating trust will help people voice their concerns more openly. Apart, from recognizing obvious displays of emotion, the leader must also be alert to subtle signs of, emotional distress, using his own feelings as a guide., Dealing with latecomers The only way to ensure that a meeting starts on time is to start it on, time. In addition, the leader should try to find out why certain people are habitual latecomers., He/she should make them realize their importance and their valuable contribution to the, meeting. If people feel important and can anticipate achievement, they will be motivated to, come on time., Managing conflict Some conflict is inevitable when people with varying views meet. This is, not necessarily a negative feature. In fact, it is a mistake to discourage conflict because it can, improve the quality of decisions, and stimulate creativity and innovation. Controversy promotes, objectivity and enquiry, and enables thorough discussion and effective problem solving. The, best solutions and plans often develop from contrary points of view within the meeting group., Of course, not all conflict is productive. Whether a given conflict is constructive or destructive, depends on how skilfully the meeting leader manages it., Injecting humour One effective way to dissolve tension in a meeting is to reframe a problem, or conflict in a humorous light. Humour can be a valuable asset in many meeting situations., For example, humour can be used to help put people at ease, make bad news easier to accept,, or introduce a sensitive subject. Personal anecdotes about funny, embarrassing, or ironic events, that happened in college, on the job, etc. are a good source of humour. They often work better, than jokes because the fact that they are real gives them added impact. In addition to using, humour, it is important for the leader to acknowledge others’ appropriate use of humour, and to, discourage inappropriate jokes., , It is a good idea to close on, a positive note., , Ending the meeting When all items on the agenda have been covered,, it is time to bring the meeting to a close, whether or not the scheduled, , Tips to Manage Conflict, • Make it clear at the start of the meeting that it is, fine to challenge ideas but that personal attacks, will not be accepted., • Make strategic seating arrangements. For, example, the place to put a domineering, individual is near the leader., , • Observe silence for a while if someone in the, group becomes aggressive., • Give an assignment (the bigger the better) to, the participant who plays devil’s advocate by, continuously challenging everything the leader, or other group members say., , https://abdullahsurati.github.io/bscit
Page 214 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 207, , time has run out. While closing the meeting, the leader should sum up what has been, accomplished and what remains to be done. He/she should recapitulate what action is expected, of each participant. If another meeting on the subject is to be scheduled, the leader should set, a tentative date and time. Even if the group has not reached an agreement, solved a problem,, or met some other objective, the meeting leader can acknowledge any progress that has been, made. This sets a positive tone for future meetings and helps to impart a feeling of control., Preparing and finalizing the minutes Traditionally, after the meeting, is over, the secretary works on the minutes of the meeting. Minutes are, Minutes are a record, of what happened at a, a record of what happened at a meeting. They serve as a useful tool to, meeting., remind the participants of the actions that need to be taken, show the, process of arriving at certain decisions, and also serve as a repository of, information for future reference., In general, the secretary takes notes during the meeting and then prepares the minutes, to be read out and signed by the chairperson during the next meeting. However, the recent, trend is towards managers who chair the meeting themselves preparing the minutes. Also,, since participants most often have access to laptops, the information can be keyed in as and, when points are raised and decisions are taken. After the meeting gets over, a fair copy of the, minutes is prepared, with the contents arranged in an appropriate format. This is then circulated, among the attendees in order to receive any comment. Once the comments are received, they, are verified and the minutes are given a final shape by the Chairperson. It is these ‘minutes’ that, are read as the first item of the agenda for the next meeting., Minutes can be classified into two types and various styles as shown in Table 9.5. Depending, upon the style, formal minutes contain the following information:, • Minimal The bare minimum of information, such as when and where the meeting was, held and the decision arrived at, • Medium A précis of what was said at the meeting in the form of a structured report, • Verbatim A word-for-word account of what was said, Similarly, informal minutes contain the following details:, • A bullet point list of the decisions taken and the work progress to date, • A list in tabular format, giving the topic, the decisions made or progress to date, and, subsequent action items, • A narrative report of a conversation that took place between several people, , While preparing the minutes of a meeting as the chairperson/leader, it may be useful to, check whether we have the following:, •, •, •, •, , A list of participants, A copy of the agenda and all the accompanying papers, A copy of any formal resolutions being proposed, A copy of any presentations being given, • Two copies of the minutes of the last meeting,, one for signature and the other for writing down, TABLE 9.5 Minutes—formal and informal, amendments, if any, Formal minutes, Informal minutes, • Copies of any suggested amendments already, received, • Minimal, • Bullet point list, •, Notes of apology for missing the meeting from any, • Medium, • Table format, participants, • Verbatim, • Narrative report, • A diary and a list of dates for future meetings, https://abdullahsurati.github.io/bscit
Page 215 :
208, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , When putting together the minutes, we must ensure that we do the following:, , • Draft the fair copy of minutes within a week from the date of the meeting., • Decide the style of the minutes and prepare a template with all the headings., • Keep a list of all the abbreviations and acronyms used and make a glossary of all these at, the end of the document., • Make an action point list, noting down all the things that were agreed upon, who is to, do them, and any deadlines agreed upon., • Make a note of all the items participants agreed to discuss at the next meeting and pass, this on to the chair or committee secretary to include in the next agenda., • Circulate the minutes to all the attendees for their comments; give them a deadline to, send in their comments if they have any., • Make necessary changes after verifying the comments., , Although we have mentioned the different styles for recording the minutes of a meeting,, Exhibits 9.2 and 9.3 show the most commonly followed styles., , EXHIBIT 9.2, , Sample minutes in the formal style, Jupiter Group of Hotels Management Committee, , Minutes of the fifth meeting held, at 6.00 p.m. on Wednesday 16 April 2015,, in Venus Hall, 58, Park Avenue, New Delhi-110 005, Present: Rakesh Chawla (President), Navneet Arora (Vice President), Vivek Pai (Secretary, Lakshmi Deshpande (Joint Secretary), Sunil Kishore (Treasurer), Amritha Saxena (member), Absent: Narasimha Rao (member), No. of, Minutes, , Subject, , Details of Discussion, , 5.01, , Minutes of last, meeting, , Minutes from March 10, 2015 meeting were read, approved and signed by the, the president., , 5.02, , Recruitment of, management, trainees, , Navneet Arora stressed the need for recruiting five management trainees, 2 for, the Delhi branch and 3 for the Bengaluru Branch. The committee discussed the, matter at length. It approved the idea and decided that the secretary will place, the advertisement in all leading details within a week., , 5.03, , Opening a branch, in Nagpur, , Lakshmi Deshpande presented the findings of survey conducted in Nagpur and, opined that there is no need for a branch in Nagpur. The committee unanimously, agreed with her., , 5.04, , Innovations in, travel packages, , Rakesh Chawla proposed that certain innovations in the travel packages for, this summer will promote revenue arising out of tourism. The committee, discussed the issue; a three-member committee consisting of Vivek Pai, Lakshmi, Deshpande and Sunil Kishore was formed and was asked to work out on this, matter and report to Rakesh Chawla latest by 25 April 2015., , 5.05, , Complaints, regarding, room service, , Navneet Arora expressed great concern over the complaints that he received, regarding room service in Chennai Branch. He read out the complaints and the, committee accepted that out of the ten complaints six appeared to be genuine., Hence the committee decided to call for explanation from Sheela Tiwari, the, Manager of Chennai branch, , The meeting was adjourned at 8.00 p.m. The next meeting of the committee will be on May 6, 2015, https://abdullahsurati.github.io/bscit
Page 216 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 209, , Evaluating the meeting In addition to paying attention to all the aspects discussed in the, preceding sections and assigning follow-up tasks, it is important to evaluate the quality of the, meeting so that future meetings will be more productive. Given below is a sample of a meeting, assessment/evaluation form (Exhibit 9.4). By answering the questions given in this form, the, group can measure the success of the meeting and highlight areas that need improvement., , EXHIBIT 9.3 Sample minutes in the informal style, •, , NA’s proposal for recruiting five management trainees was accepted. Advertisement, would be placed., , •, , LD reported that there is no need for a new branch in Nagpur. The committee accepted., , •, , To carry out RC’s proposal for bringing in some innovations in summer travel packages,, a threemember committee was formed., , •, , NA read out the complaints on Bengaluru branch room service. Committee decided to, call for explanation from the Bengaluru Manager., , EXHIBIT 9.4 Sample of a meeting assessment form, Please fill in this form by providing the necessary details or encircling your preferred option:, Date:, , Not at all, , 1, , Meeting Objectives, , Not really, , 2, , Somewhat, , 3, , Pretty much, , 4, , Very much, , 5, , Not applicable NA, 1., 2., 3., 4., 5., 6., 7., 8., 9., 10., 11., 12., 13., 14., 15., , Was the meeting necessary?, Was the purpose clear?, Was the meeting manager prepared?, Were the participants prepared?, Were all the needed people present?, Were the participants motivated?, Was the control of the meeting adequate?, Were people involved in discussion?, Was the needed information available?, Were your resources and ideas used?, Were decisions reached on agenda issues?, Was commitment to decisions obtained?, Was the time used efficiently?, Were follow-up work assignments clear?, Were the room and facilities adequate?, Use the back of this form for comments and suggestions, https://abdullahsurati.github.io/bscit, , 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, , 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, , 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, , 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, , 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, , NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA
Page 217 :
210, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , CONFERENCES, A conference also is a type of business meeting. The level of formality of a meeting varies, according to its size and purpose. When two or more people gather in an office to discuss a, project, the meeting style will be much less formal than when 30–40 people assemble to learn, about a new government ruling., In general, the level of formality increases with the size of the group. However, the level of, formality also is an indication of the objective and climate of the meetings. When a serious matter, is being discussed by a small group, the meeting will be very formal. In a large meeting, called to, announce record profits and thank all the employees, the atmosphere would be fairly informal., The purpose of a conference is to confer with people having similar interests and to, pool their resources, i.e., experiences and opinions. In this collaborative thinking process, a, discussion generally results in a set of suggestions or recommendations on the topic/theme, of the conference. The number of participants is greater and the spectrum of subject matter, wider in a conference than that of a seminar or a symposium. There may be a wide range of, activities such as formal lectures, exhibitions, and audio-visual presentations organized during, a conference., There has been a long tradition of organizing seminars and conferences, in academic institutions. Business enterprises also utilize opportunities, ‘No grand idea was ever, born in a conference, but, for learning and sharing new ideas and experiences. Often, academic, a lot of foolish ideas have, institutions collaborate with business enterprises to organize conferences, died there.’, on various themes. These conferences serve as a forum for experts from, –F. Scott Fitzgerald, ‘The Crack, various organizations to meet, discuss, and acquire new knowledge and, -up’, insight into the theme of the conference., , Significance, Conferences play a significant role in developing an analytical and questioning attitude among, the participants. The participants in a conference make an attempt to define the subject of, discussion and to ascertain its depth, scope, and related critical factors. They discuss all the, factors and offer suggestions at the end of their deliberations. Since all the speakers are experts, in their field, they suggest alternative solutions, which lead to the best decision., Conferences have educational value in business and also in other fields where negotiation,, collaboration, and collective thinking are essential. A corporate manager who participates in or, leads a conference can develop his/her ability not only to define, analyse, and discuss a problem,, but also to arrive at various solutions and take apt and sound decisions., Within organizations, conferences are held to train employees. It may also serve the purpose, of modifying attitudes, opinions, and feelings of participants. A conference within a business, organization can provide necessary information on the policies, procedures, customs, traditions,, and objectives of the organization to the conferees. New employees can share the practical, knowledge and experience of seniors and superiors through conferences. The management can, use conferences tactfully to correct mistakes and misunderstandings among groups although, not to warn or reprimand the individual participants., An employee who attends an in-house conference starts thinking in terms of the company, as a whole. In a well-planned conference, information is collected, facts are assembled and, studied, problems are defined and analysed, all the advantages and disadvantages of the, alternative solutions are discussed, and then attempts are made to arrive at the best decision., This demonstration of a problem-solving approach is bound to have a positive effect on the, https://abdullahsurati.github.io/bscit
Page 218 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 211, , employees who attend the conference, by boosting their morale and strengthening their, confidence. Consequently, the employees tend to give more thought to the coordinated activities, of the organization., Conferences lead employees to think more effectively and more often about the objectives, and challenges of the organization as a whole. For example, a weekly conference of the sales, department can help salesmen to develop an effective sales strategy for the next month., In addition, the sharing of each other’s views and experiences helps them to improve their, performance. At some industrial conferences, experts and delegates with similar concerns are, invited to discuss their common problems and prospects. Such conferences stimulate a creative, flow of ideas and information, pooling of knowledge, views, and experiences. If the conference, is hosted by an industrial concern, it enhances the host’s prestige and goodwill. Industrial, conferences can also promote public relations and direct the attention of the public as well as, the government to the problems and prospects facing a particular industry., Conference sessions can bring about a positive change in a conferee’s attitude. An individual’s, attitude towards other persons and situations is governed by his/her past experiences, and, the impressions caused by these experiences. In conference sessions, the individual listens to, interpretations made by the other conferees about the same persons and situations. The different, perspectives offered by the group broaden the individual’s outlook and often have the positive, effect of dissipating misperceptions and doubts. While this may not happen with every individual,, the general tendency for the average individual is to be influenced by the group’s attitude., , Planning and Preparation, Organizing a conference is a challenging task. It requires meticulous planning and systematic, preparation. The following guidelines may be helpful in planning a conference:, , • Decide on a broad area and then narrow it down to a specific theme after consulting, other members of the organization., • After deciding on the conference theme, identify related issues that have adequate scope, for deliberations., • Identify and prepare a list of prospective conferees., • Decide the date., • Identify a chief guest and get his/her consent., • Work out the topics for various sessions and identify the chairperson, vice-chairperson,, and lead speaker., • Prepare a list of invitees., • Estimate the budget for each session and fix the registration fee., • Prepare a brochure containing the following details:, – theme of the conference;, – name of the sponsor/s, dates;, – name of the organizer(s);, – an introduction to the theme and to the host organization;, – related issues on which papers can be presented;, – travel accommodator;, – registration form, and deadline for the submission of abstracts of papers; and, – address (both postal as well as email, including phone number) of the conference, coordinator., Brochures are discussed in detail later in this chapter., https://abdullahsurati.github.io/bscit
Page 219 :
212, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , • Prepare the format for a covering letter to be sent along with the brochure giving all, necessary details. See Exhibit 9.5 for a sample cover letter., • Form an organizing and an advisory committee., • Allocate work to individual task groups of the organizing committee so that, responsibilities are shared., • Plan well ahead (at least three months in advance) so as to give adequate time to the, conferees to prepare., • Meet the committee members frequently to learn the latest developments and to share, any other information., • Prepare a conference evaluation form., , EXHIBIT 9.5 Sample covering letter accompanying a brochure, Birla Institute of Technology and Science, Pilani, April 21, 2015, , Dear Prof. / Dr/Mr/Ms _________________________, Sub.: International Conference details, We are planning to hold an International Conference on ‘Accessibility and Rural Development, Planning’ at our Institute during 25–26 May 2015. The International Forum for Rural Transport, and Development, UK, supports this conference., We are enclosing a brochure containing the details of the Conference., Your participation would add value to the conference deliberations. Kindly confirm your, participation by sending us the abstract of your paper and the duly filled in registration forms, as per the deadlines given., Thank you and regards, Yours truly, sd/________________ sd/________________, A.K. Sarkar , , M.L. Dash, , (Convenors), , Procedure, It is the duty of the convener of the conference to ensure that the required information reaches, all the prospective conferees and invitees. After receiving replies from the participants, the, relevant information has to be extracted and tabulated, and necessary arrangements made for, the following:, • Transport, • Accommodation (ensure that the, , https://abdullahsurati.github.io/bscit, , participants are well-received and, have a comfortable stay)
Page 220 :
https://abdullahsurati.github.io/bscit, , • Reception, • Timings and duration of the, sessions, • Lunch and tea breaks, • Invitations for inaugural and, concluding sessions, • Venue, • Seating, , GROUP COMMUNICATION, , 213, , • Projection facilities, • Rapporteuring (investigating a problem, and reporting on it), • Identifying volunteers, • Preparation of a souvenir containing, • Abstracts of all papers to be presented, • Production of required, • Materials to be distributed, , At the inaugural session, the convener of the conference should welcome all the guests and, delegates and introduce the theme of the conference, and also briefly mention the arrangements, that have been made for conducting various discussion sessions., Generally, the duration of a conference can vary from 1 to 3 days. If the number of participants, is large, parallel sessions can be organized so that conferees get adequate time to present their, views. During the closing session, the conference evaluation sheet may be circulated to be filled, by the participants. This kind of feedback may enable the detection of any flaws and hitches that, might have gone unnoticed, and also include any worthwhile suggestions for future conference, planning. Once the conference is over, prepare a report containing the session details, names of, participants, and summary of the discussion on each topic. This will help publish the conference, proceedings later, which will incorporate all the papers that have been presented. The CD, provides a sample conference evaluation form (Exhibit C9.2)., , SYMPOSIA AND SEMINARS, A ‘symposium’ is a formal meeting in which experts on a particular subject domain have, discussions about certain topics in that domain. For instance, biologists and biotechnologists can, organize a symposium on recombinant DNA technology and its applications in biotechnology, wherein a number of experts will speak on various aspects of this topic and present their academic, and research expertise. They deliver lectures and conduct laboratory sessions and provide the, participants with the necessary notes. Participants may be faculty or students from academic, institutions, R&D professionals from industries, etc. As against a conference, in which a lot of, papers are presented, symposium presentations are restricted to few experts, but allows more, in-depth discussion on the topic. The main aspect when organizing a symposium is to acquire, contact with a good number of experts. Then the following steps may be carried out:, , • Select a subject area and a topic (for instance, if the subject area in civil engineering is, water resources, the topic can be water resource development and management)., • Divide the topic into various issues and identify one expert for each., • Draft a proposal containing the objectives, theme, topic, issues, dates, duration, names of, experts, budget, and sponsors and get the approval from the administration., • Send proposals/requests for getting financial assistance from various agencies. The, application procedures might be obtained on the respective websites., • Prepare a brochure containing all details pertaining to the symposium., • Prepare invitations to the experts and prospective participants. Attach the brochure., • Identify the prospective participants and send the invitation through email or by post., • Contact the experts and make necessary arrangements., • Identify eminent persons for delivering inaugural and key note addresses., • Form committees to take care of various functions such as technical sessions, reception,, accommodation, hospitality, publication, publicity, etc., https://abdullahsurati.github.io/bscit
Page 221 :
214, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Ensure that the venue has all necessary facilities for conducting the symposium., , A ‘seminar’ is a meeting held for exchange of useful information by members of academia/, business/industry. It brings together groups of people from a particular sector for recurring, meetings focusing each time on a particular topic. During a seminar, people present their, research/new process/new technology in order to get the views of others. Hence, the participants, of a seminar need to be very active and contribute significantly to the development of the, research areas presented. However, as compared with the classroom lectures, seminars are less, formal and involve more discussions. Students may have to present and participate in a number, of seminars during their academic career (e.g., project seminars). Likewise, professionals also, participate in seminars to enrich their knowledge on various topics (e.g., a seminar on ‘recent, trends in marketing’)., Besides those organized for small groups, seminars are also organized for larger groups. In, such cases, they are almost similar to conferences in terms of their preparation, planning, and, procedure. Please refer to the section ‘Conferences’ in this chapter to understand the steps, involved in organizing a seminar., Now, we will discuss some of the documents that play a very important role in effective, group communication., These are brochures, bulletins, and newsletters. These are written forms of group, communication that showcase an event or an organization in a few pages. Since the basic, purpose of this form of communication is to advertise or communicate critical information to a, wide variety of audience, it persuades the reader by using attractive language., , BROCHURE, A brochure, also referred to as pamphlet or leaflet, is used to advertise a company or organization, and/or for informing the target audience about its goods and services., Brochures are typically 8.5” x 11” or 8.5” x 14” trifold but can also have different dimensions, and a number of folds. Usually a glossy paper is used, so that it does not get damaged on, wide circulation. In a brochure, sentences are kept concise and readable; jargon and clichés are, avoided; and repetition is totally avoided, if possible. Moreover, active voice is used to make the, transmission of the message more effective., A brochure serves multiple purposes. It usually provides explanation of the services offered, by an organization. Moreover, it offers a platform for answering frequently asked questions, about an organization or its products and services. A pamphlet is used by organizations like, World Health Organization (WHO), who use them to disseminate health-related information, and detailed instructions in a lucid manner. The flyer further provides paths and links to, further information. A leaflet can educate people about a specific programme or event, though, brochures are the most commonly used medium for announcement of conferences., See Exhibit 9.6 for the general structure of a brochure. Please refer to the CD for more, samples., , BULLETIN, A bulletin is a short report, especially one released through official channels to be broadcast or, published. It is written in an easily legible format and usually divided in sections so that the, information can be easily understood. However, a bulletin is larger in size in comparison to a, brochure or a newsletter., https://abdullahsurati.github.io/bscit
Page 222 :
https://abdullahsurati.github.io/bscit, , EXHIBIT 9.6, , GROUP COMMUNICATION, , 215, , General structure of a brochure, , Bulletins are used for posting public messages, for example, to advertise items wanted or for, sale. Bulletin boards facilitate addition and removal of messages for other people to read and, see. In the field of journalism, bulletins containing brief description of events are published,, based upon information received just before the edition goes to print. News bulletins are used, for short news announcements of ongoing news stories., One of the benefits of using bulletins is to make sure that the facts are disseminated in, a quick and concise manner. They help in ensuring the basic information passed around the, organization quickly, so that everyone has a clear idea of what is happening and what they are, supposed to do. This saves a lot of time of the employer as well as employees., https://abdullahsurati.github.io/bscit
Page 223 :
216, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , NEWSLETTER, A newsletter is a publication regularly distributed by an organization to disseminate information, to select audience on a particular subject, or for circulation within the organization. It usually, has one main subject or topic by one or more authors. Newsletters can contain information on, upcoming events, conferences, etc. as well as articles on specific topics., A newsletter is generally printed on a letter-sized paper, or published through other means, such as newspapers or digests. Nowadays, e-newsletters are gaining a lot of popularity as they, are environment friendly and easier to distribute. The content must be accurate, factual, brief,, and impartial, and may contain technical jargon or specialized language not readily understood, by a layperson. Review and proofreading is of prime importance in the preparation of a good, newsletter. Newsletters do not have a word limit and the writer is free to express as much as he/, she wants, though it should be relevant, to the point, and without redundancy., Exhibit 9.7 shows snapshots from a newsletter. You can view the full newsletter in the, companion CD., , EXHIBIT 9.7, , Sample newsletters, , https://abdullahsurati.github.io/bscit
Page 224 :
https://abdullahsurati.github.io/bscit, , GROUP COMMUNICATION, , 217, , SUMMARY, Group communication is essential for professional, as well as personal progress as it enables us to share, information with other members, make decisions,, and solve problems in order to achieve our objectives. Group communication assumes various forms, such as discussions, meetings, conferences, seminars, symposia, negotiations, etc., and all these forms, require skills in expressing oneself, convincing others, adapting to a group environment, listening to, , others patiently, and leading and directing others., An understanding of these forms and also of the, strategies that we can use to participate effectively, in such discussions will enable us to achieve success, professionally and personally. There are some written forms of group communication too such as brochures, bulletins, and newsletters, which showcase, the event or the organization in brief manner., , EXERCISES, 1. Based on your understanding of group communication, state whether each of the following statements is correct or incorrect. (Justify your answer, in about 75 words.), (a) Surprise meetings are very important for the, growth of an organization., (b) It is not necessary to strictly follow the, sequence of agenda items while discussing, them in a meeting., (c) A group discussion is a potential evaluation, tool for assessing a person’s attitude., (d) Conferences are useful in arriving at possible, solutions to some problems., (e) Your success in a GD is decided by the number, of times you speak., (f) You should never personalize your arguments, during a GD., (g) Conferences organized in a business enterprise, pro-mote the executives’ organizational and, analytical capabilities., (h) It is always better to call a meeting in the early, hours of the first day of the week., , (i) Selection GDs have a named leader., (j) Non-verbal communication plays an important, role in a GD., 2(a) Assume that as the manager of a company, you, are participating in a GD to decide upon the cost, cutting measures to be adopted in your organization. Your organization has been providing transport facilities, refreshments, subsidized meals, etc., to the employees. Now prepare at least four expressions for each of the following functions you, may have to carry out during your discussion:, (i) Expressing your opinions, (ii) Disagreeing with someone, (iii) Raising questions, (iv) Interrupting someone, (v) Being polite and firm, (vi) Describing situations, 2(b) Organize group discussions on the following, topics and evaluate the participants using the, criteria mentioned in the evaluation form given, below (if you are also a participant, you can assess yourself )., , GD Evaluation Form, Candidate No., , Knowledge (25), , Communication, Skills (25), , Group, Behaviour (25), , 1, 2, 3, 4, 5, 6, 7, 8, https://abdullahsurati.github.io/bscit, , Leadership (25), , Total (100)
Page 225 :
218, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Topics for Group Discussion, • Competition is ultimately more detrimental, than beneficial to society., • To be an effective leader, a public official, must maintain the highest ethical and moral, standards., • The greatness of an individual can be decided, only by those who live after them, not by their, contemporaries., • In any field of inquiry, the beginner is more, likely than the expert to make important, discoveries., • Technology creates more problems than it, solves., 3(a) At the third meeting of the executive committee of the Staff Association of Nehru Institute of, Technology, New Delhi, held at 5 p.m. on Thursday, the 21st of November 2014, in Gandhi Hall,, the following business was transacted:, • Changing the duration of semesters, • Study leave for staff members, • Celebration of the new year, • Minutes of the last meeting, • Any other matter with the permission of the, Chair, • Setting up a separate gym for the staff, • Arrange these agenda items in the most, appropriate sequence and prepare the formal, type of minutes as discussed in this chapter., Invent other necessary details., 3(b) The Board of Directors of Bharti Steel Ltd, 20,, Bapu Nagar, Nagpur, held its sixth meeting of, the year on 23rd April 2015 at 11 a.m. on the, company premises. The agenda was as follows:, • Minutes of the previous meeting, • Decrease in sales in the current year leading, to losses, • Expansion of the annual capacity from 2 lakh, tons to 4 lakh tons of steel, • Deputation of three mechanical engineers to, the USA for a six-month training programme, under Indo-US technical collaboration, programme, • Improvement in the housing facilities for, employees, • Any other matter with the permission of the, chair, , As secretary to the board meeting, draft a notice, to be circulated among the participants and write, the minutes of the meeting., 3(c) Consider yourself to be the Secretary in Attendance at the third meeting of the management, committee of Gramin Cooperative Stores, Bhadpur. The meeting was held on 23rd March 2015., Arrange the agenda items given below in suitable order and write the minutes of this meeting:, •, •, •, •, •, , Chairman’s report, Purchase of books, Appointment of delivery staff, Minutes of the last meeting, Complaints regarding the quality of bakery, products, • Dealing with malpractices, • Adding a new grocery section, • Any other matter, 3(d) The executive council of the Students’ Union of, Sardar Patel University held its second meeting, at the Students’ Council building room number, 20 on 3rd September 2014 to discuss the planning and preparation of OASIS, the 30th Annual, Cultural Festival of the university. As the General Secretary, you have discussed the items of, discussion with the President and are ready for, the meeting. Prepare the agenda (six items) and, minutes of this meeting., 3(e) The sixth meeting of the managing committee, of Tata Commerce College, Ajmer, was held at, 3 p.m. on 20th February 2015 in room number, B-45. The agenda was as follows:, • Minutes of the previous meeting, • Appointment of auditors for the financial year, 2008–09, • Construction of a recreation centre for faculty, and students, • Establishment of additional computer centre, • Any other matter with the permission of the, Chair, As the Secretary, write the minutes of this, meeting., 4(a) A national conference on ‘Technology Forecasting Techniques’ is being organized in Delhi under, the auspices of Department of Science and Technology, Government of India. About 200 scientists, engineers, and technocrats from academic,, , https://abdullahsurati.github.io/bscit
Page 226 :
https://abdullahsurati.github.io/bscit, , research, and industrial organizations, both government and private, are expected to attend. The, topics such as frontiers in biotechnology, energy, prospects, telecommunication, approporiate, technology and education for 21st century, are, likely to come up for discussion., (i) Assuming yourself to be the Conference, Secretary, write a covering letter to be sent to, all the participants., (ii) Prepare a brochure giving details of the, conference-theme, venue, time, sessions,, president, etc., , GROUP COMMUNICATION, , 219, , 4(b) Prepare a conference brochure based on the, guidelines given in this chapter for each of the, following conference situations:, (i) Apollo Medical College is planning to, organize a national conference on ‘Internet, Applications in Medical Profession’ during, 10–11th September 2015. As the Head of the, Department, prepare the conference brochure., (ii) Birla Institute of Technology and Science,, Pilani, is planning to hold an International, Conference on ‘Meeting Communication, Challenges at Workplace’ during 27–28th July, 2015. As the Head of the Languages Group,, prepare the conferene brochure., , https://abdullahsurati.github.io/bscit
Page 227 :
https://abdullahsurati.github.io/bscit, , PART III, , READING AND, WRITING, , Chapter 10: Reading Comprehension, Chapter 11: Elements of Effective Writing, Chapter 12: The Art of Condensation, Chapter 13: Technical Reports, Chapter 14: Technical Proposals, Chapter 15: Formal Letters, Memos, and Email, Chapter 16: Research Papers and Technical, Descriptions, , https://abdullahsurati.github.io/bscit
Page 228 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 10, , Reading Comprehension, , OBJECTIVES, , INTRODUCTION, , You should study this chapter, to know, , • the techniques for, , achieving effectiveness in, comprehending various texts, • how to predict content and, understand the gist of a, particular text, • the SQ3R (survey, question,, read, recall, review) technique, for meaningful reading, • study skills to be applied, while reading the texts, , According to Richard Steele, ‘Reading is to mind what exercise is to, body’. Akin to keeping one’s body fit with regular exercises, reading, helps to keep the mind active. Comprehending what we read is the, most demanding aspect of our reading. Students and professionals need, to read a variety of texts in order to understand concepts, enhance their, knowledge and to know what is going on around them. However, if, they are not aware of certain reading techniques they may feel that they, are wasting time in reading texts. When they learn these techniques, and practise them while reading, they may find that their reading is, more meaningful, fruitful, and enjoyable., , IMPROVING COMPREHENSION SKILLS, Improved reading comprehension skills can positively impact many, facets of a student’s academic performance. Students who have, effectively read and understood reading assignments are better prepared, for class, leading to improved class participation and more accurate, and complete notes. Performance in exams and quizzes could greatly, improve as students become more proficient and effective readers. Their, interest in a subject is often fostered when they understand the reading, assignments. In addition, as students gain proficiency in reading, selfesteem improves. Similarly, professionals also read a lot of material, related to their work, and it is important for them to have good reading, comprehension skills., The following are some of the ways in which comprehension skills, can be improved:, • Read a variety of materials. Do not limit yourself to textbooks., • Read a fairly long portion of the material. It would be difficult to, assess reading comprehension based on one or two paragraphs., Try to read an entire section or chapter instead., • Circle unknown or unfamiliar words as you read., https://abdullahsurati.github.io/bscit
Page 229 :
224, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , • After reading, recall as much of the information as possible. Jot down points if you like., Then check the accuracy and completeness of your recollections. If the main ideas are, presented in a particular order, see if you can recall the structure., • Consider how interesting the subject matter is and how much you already know about, the subject., • Answer questions about the material after reading it., These strategies may help you in achieving the following purposes., ‘No matter how busy you, may think you are, you, must find time for reading,, or surrender yourself to, self-chosen ignorance. ‘, , –Confucius, , •, •, •, •, •, •, •, , To enhance understanding of the content in a text, To improve understanding of how information is organized in a text, To improve attention and concentration while reading, To make reading a more active process, To increase personal involvement in the reading material, To promote critical thinking and evaluation of reading material, To enhance registration and recall of text information in one’s memory, , TECHNIQUES FOR GOOD COMPREHENSION, As we have already discussed, poor comprehension skills are usually attributable to one or, more factors: lack of interest, lack of concentration, failure to understand a word, a sentence, or, relationships among sentences, or failure to understand how information fits together., In this section, we will look at the underlying aspects of text you need to be aware of and the, techniques you should develop and practise to hone your reading skills:, •, •, •, •, •, , Skimming and scanning, Non-verbal signals, Structure of the text, Structure of paragraphs, Punctuation, , • Author’s viewpoint (inference), • Reader anticipation: Determining the, meaning of words, • Summarizing, • Typical reading comprehension questions, , Skimming and Scanning, Before starting to read a text in detail, you should take a moment to preview the text. Read quickly,, without pausing to study the details. This is called skim reading or skimming. You should understand, , • for which audience the text was written (general public, professionals, laymen . . .);, • what type of text it is (report, informal letter, formal letter, article, advertisement . . .);, • what the purpose of the author is (to, describe, to inform, to explain, to instruct,, to persuade); and, • the general contents of the text., , After having skimmed the text, you can, study it in more detail, reading more slowly and, carefully and looking for specific information, that you are interested in. This is called scanning., , Non-verbal Signals, Scanning, , The meaning of a text is not only conveyed by, means of words. All texts also contain non-verbal, https://abdullahsurati.github.io/bscit
Page 230 :
https://abdullahsurati.github.io/bscit, , READING COMPREHENSION, , 225, , signs. Non-verbal signs may include certain style features, such as different fonts, bold print,, underlining, or italics. The meaning of these style features can vary from one text to another. In, one text italics may be used to emphasize a word, in another text italics can be used for subtitles., Layout features are also non-verbal signals (Exhibit 10.1). For example:, Heading:, Title:, Subheading:, Photographs:, Captions:, Division into paragraphs:, Figures, graphs, bar charts, etc:, , A title printed at the top of a page to indicate the, subject matter that is going to be discussed in a, particular chapter, column, or section, Tells you what the text is about, presents you with a brief summary, introduction,, or explanation, Pictures related to an article or a text, Comments on pictures related to a text, Each paragraph is a unit and deals with one, particular idea (see also the section on paragraphs), To visualize facts and figures presented in the text, , Structure of the Text, Most texts start with a title and sometimes a subtitle. After that comes the introduction and the, body, followed by a conclusion or summary., An important aspect of reading is prediction. The better you can predict what you are going, to read, the faster and more effective you will read. The prediction process begins with the title., The introduction mostly informs you about what you can expect. The body consists of, paragraphs. Each paragraph deals with one aspect of the subject matter. Paragraphs are linked, in a logical way. The conclusion sums up and puts the subject matter in the right perspective., , Structure of Paragraphs, A typical paragraph consists of three parts. The first part is the topic sentence, which is, the heart of the paragraph, which can figure either at the beginning or at the end of the, paragraph. The topic sentence (also called thesis sentence or key sentence) contains the new aspect, of the subject of the text. The second part of the paragraph contains sentences which develop, support for the topic sentence. These sentences may contain arguments, explanations, details,, examples, and other supporting evidence. The third part of the paragraph is often a summary of, the paragraph or a linking sentence to the next paragraph., In many well-written texts the reader will get a good idea of the contents by reading just the, first sentences (i.e., the topic sentences) of each paragraph., , Punctuation, Punctuation is partly based on grammar. For example, commas are often used to separate, clauses. If you understand the meaning and usage of punctuation marks, it will be easier to, understand the grammatical structures., Punctuation marks also indicate how the author wants you to interpret a piece of text., For example, if the author puts something in brackets, that part of the sentence should be, interpreted as an addition to the sentence. (See Appendix A in the CD.), https://abdullahsurati.github.io/bscit
Page 231 :
226, , TECHNICAL COMMUNICATION, , EXHIBIT 10.1, , https://abdullahsurati.github.io/bscit, , Layout features, , GENERAL KITCHEN LAYOUT, , Heading, , factors that one needs to keep in mind while planning a kitchen. This is usually done by ‘facility, planning department’, which carefully plans the layout of the kitchens. Some hotels contract, out these services but certain hotel chains, such as Oberoi Hotels and Resorts, have their own, facility planning department which is responsible for planning and layout of all the kitchens., Planning a kitchen entails much more than just placement of equipment in its place. A wellplanned operation will always follow a systematic procedure (see Fig. 3.1)., , Photograph, , Receiving, , Figure, Figure, caption, , Storing, , Processing, , Cooking, , Serving, , FIG. 3.1, When we talk of design of a kitchen, it would generally mean the overall planning of the, space with regards to size and shape of the operations. Layout would mean the detailed, as workstation., up of food for a busy meal period thus creating happy guest and good reputation. Such an, , Author’s Viewpoint (Inference), In reading a text you make inferences or assumptions about the position of the author. Is the, author neutral or does he/she have an opinion? The author often shows his or her opinion either, by adding certain phrases or by adding a value to a word., https://abdullahsurati.github.io/bscit
Page 232 :
https://abdullahsurati.github.io/bscit, , READING COMPREHENSION, , 227, , Authors can add words like luckily or unfortunately to show approval or displeasure,, respectively. They can also add words which show their surprise, regret, or other emotions,, for example, surprisingly, to shock, unexpectedly, regrettably, pity, desirable, to be disappointed,, etc. They may also use words to indicate the level of certainty, for example, certain, obviously,, undoubtedly, naturally, always, often, likely, probably, maybe, unlikely, hardly, rarely, and never., The author could also add words to comment on more or less objective facts. For example, ‘Only 40 per cent of the staff is female’ has quite a different meaning from ‘As much as 40 per, cent of the staff is female’., The author can also reveal his/her viewpoint by adding value to a word. For example, if, something is big he/she may use the word huge or gigantic to indicate he/she is impressed. If, something is small he/she may use words like tiny or microscopic to indicate that he/she is not, impressed. If someone is afraid he/she may use the word terrified to add suspense; if something, is good he/she may use the word fantastic., , Reader Anticipation: Determining the Meaning of Words, Even readers who have a wide and flexible vocabulary will encounter words whose meaning, they do not know. You may have often come across a not-too-familiar word whose meaning, you were able to guess accurately. This is possible if you understand the relationships between, words in meaning and form., You can develop this skill by following a method. Look for clues or indications that help you, find the meaning. The following steps can help you:, Step 1, Determine the word class, i.e., a verb, a noun, an adjective, an adverb, etc., Step 2, Determine its function in the sentence, i.e., how it is related to other words in the, sentence., Step 3, Analyse the contextual clues, i.e., the context in which we find this word positive or, negative; what the context tells us about the word., Step 4, Is there any relation between this word and a word that is familiar to you? Consider, the word aging in the population is aging rapidly. We recognize the word age in aging, and therefore we can easily derive its meaning., Step 5, Try and derive the eventual meaning of the word., , Summarizing, It is very difficult to remember the complete contents of long texts. For that reason it is often, advisable to make notes of essential information in the text. The result is a short outline of the, text containing all its important aspects. The length of the summary largely depends on the, density of the text. The average length of a good summary is about one-third of the original text,, but summaries of detailed texts may be longer., The following steps can be taken when summarizing a text:, , Step 1: Familiarize yourself with the material, After you have read the text or a section of it, you can start summarizing. The length of the, section you can easily read through at a time, in an attempt to summarize the text in parts,, depends on the structure and the complexity of the text. With reports, it is often a good idea to, read one section and then summarize. Newspaper articles are often best read as a whole before, starting with the summary., https://abdullahsurati.github.io/bscit
Page 233 :
228, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Some General Rules to Determine What is Important and What is Not, • Important: Author, title, reason why the text was, written, purpose, theme, key words, link words,, all major aspects (especially topic sentence of, each paragraph), explanations, author’s opinion., , • Less important: Introduction, summary, repetition, examples, anecdotes, analogies., , Step 2: Select important information, You should go through each paragraph, sentence by sentence, asking yourself which information, is absolutely essential to the argument. You should write down complete sentences as much as, possible. Jot down your points clearly or you will have to read the original text all over again. An, alternative is to underline or highlight important sentences or phrases., Step 3: Paraphrase the information, Paraphrasing, or rewriting from the original text in your own words, forces you to completely, understand what you are noting down. You should try to condense long and complex sentences, into much shorter ones. Use active sentences as much as possible and avoid adjuncts., Practise economy with words. Avoid descriptions if they can be summarized in one word., For example, do not write ‘The state exclusively controls and possesses the trade in stamps’, but, write ‘The state monopolizes the trade in stamps.’, Step 4: Insert links between sentences and paragraphs, Make sure that the connection between sentences is clear and logical and that each group of, sentences smoothly fits in one paragraph. This can be done by inserting link words such as, therefore, nevertheless, but, however, because, on the other hand, etc. Sentences can also be linked by, relative pronouns, for example, who, which, whose, and that. Using the correct links means that, your summary becomes more logical and coherent., Step 5: Adjust the length of the summary, If you have to write a summary as part of an assignment and you are assigned a maximum, number of words, count the words after writing it out. Depending on whether your word count, exceeds or falls below the given number, you can leave out unessential information or add, important information., , Typical Reading Comprehension Questions, You should become familiar with the main categories of reading comprehension questions, asked in standardized tests. This will help you to focus your attention while reading the passages., Reading comprehension questions usually take one of three forms: questions based on the, entire passage, questions based on sections of the passage, and questions based on particular, words or sentences. Each of these is discussed and exemplified in Tables 10.1–10.3., , • Questions based on the entire passage, • Questions based on the entire reading usually target the main point of the text, author, intentions, main ideas, and content. Ten types of questions based on the entire passage, are given in Table 10.1 along with sample wordings., • Questions based on sections of the passage, In order to answer questions on specific sections of the passage, one must be able to identify, and understand the main points in each paragraph. Look for cue words such as advantages,, https://abdullahsurati.github.io/bscit
Page 234 :
https://abdullahsurati.github.io/bscit, , READING COMPREHENSION, , 229, , TABLE 10.1 Sample questions based on the entire passage, , Question type, , Sample wording, , 1. Main point:, What is the passage trying to tell you?, 2. Primary purpose of author:, What does the author want to tell you?, 3. Mood or attitude of author:, What is the tone or attitude of the author?, , The passage is mainly concerned with . . ., The author’s primary purpose in the passage is to, ..., On the basis of the passage, the author’s attitude, towards ________ can most accurately be termed, as one of . . ., , 4. Assumptions made by author:, What assumptions are made by the author but not Which of the following is an assumption made by, directly stated in the passage?, the author?, 5. Implications of passage or author:, What does the author or the passage imply?, , The author implies that ________ is . . ., , 6. Applications of main ideas:, How can you extend the main ideas of the passage? The author provides information that would, answer all of the following questions except . . ., According to the author, _______ would lead to . . ., 7. Summary of passage:, In a few words, how would you describe the passage? Which of the following titles best summarizes the, content of the passage?, What title would you give the passage?, Which of the following would be the most, appropriate title for the passage?, 8. Content of the passage:, What is the passage really about?, , Which of the following describes the content of, the passage?, , 9. Inferences:, What can you infer from the passage as a whole?, It can be inferred from the passage that . . ., 10. Statements with which the author would agree:, What could you say that the author would agree, With which of the following statements regarding, with, knowing the way he/she wrote the passage? ______ would the author probably agree?, , disadvantages, similarities, differences, in contrast with, in comparison to, most importantly,, primarily, and on the other hand. Questions based on portions of the text usually deal with, inferences, applications, and implications of the information. Six types of questions based on, sections of the passage along with sample wordings are given in Table 10.2., • Questions based on words, phrases, or sentences, Here, specific details and pieces of information from the text may be the subject of test, questions. The content itself is not usually the subject of questions. Rather, the reasons, for using the information or the meaning of the information could be questioned., https://abdullahsurati.github.io/bscit
Page 235 :
230, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , TABLE 10.2 Sample questions based on a section of the passage, , Question type, , Sample wording, , 1. Inferences:, What can you infer from specific sections in, the passage?, , It can be inferred that the ancient atomic theory, was primarily based on . . ., , 2. Applications:, How can you apply information in specific sections, of the passage to other areas?, , It can be inferred that in the paragraphs, immediately preceding the passage, the author, discussed . . ., , What precedes or follows the passage?, What do you think was written right before, the passage or right after the passage?, 3. State ideas:, Can you find in the passage a specific reference to a According to the passage, blacks were denied, stated idea?, entrance into anti-slavery societies because . . ., 4. Implications:, What is implied by a section in the passage?, , The author implies that many Americans’, devotion to the ideal of justice is . . ., In describing American attitudes about the land, (lines 7–8), the author implies that . . ., , 5. Tone or mood:, What is the tone or mood of a section of the passage? At the conclusion of the passage, the author’s, tone is one of . . ., , Two types of questions based on words, phrases, or sentences are listed in Table 10.3 along, with sample wordings., TABLE 10.3 Sample questions based on words, phrases, sentences, , Question type, , Sample wording, , 1. Reason for use:, Why are certain words, phrases, or sentences The author mentions Newton’s Principia in order to, mentioned or used in the passage?, ..., 2. Meaning of a Word or Phrase:, What is the meaning of a certain word, phrase or The enemy referred to in the last sentence is, sentence in the passage?, probably . . ., According to the author, the words in the Declaration, of Independence, ‘all men are created equal’, are, meant to represent . . . By ‘this skepticism’ (line 35),, the author means . . ., , PREDICTING THE CONTENT, Predicting the content of a given reading passage enables you to quicken the process of, comprehension. In other words, thinking ahead of the given information or anticipating the, https://abdullahsurati.github.io/bscit
Page 236 :
https://abdullahsurati.github.io/bscit, , READING COMPREHENSION, , 231, , information yet to come in the reading passage, makes you understand the entire passage in its, total perspective. In order to guess the information through the process of prediction, you need, to develop rapid reading skills because an efficient reader is able to think ahead, hypothesize,, and predict., You may find several cues in the passage that may assist you in predicting the content. Your, knowledge about the subject, the topic sentences of each paragraph, headings, subheadings,, graphics (e.g., graphs, diagrams, and charts), and cohesive markers (e.g., pronouns, transitions,, repetitions, and synonyms), all would enable you in the process of prediction., A pre-reading survey of the passage is a necessary condition for predicting the content. This, is the first function you may carry out when you need to comprehend the contents of a given, passage. The following steps and the example discussed thereon may help you accomplish the, prediction process:, • Familiarize yourself with the subject of the passage by glancing rapidly through it., • Guess the information through the linguistic/graphic cues., • Recall related information., • Use background information related to the topic to accelerate the prediction process., Example, Given the widespread acceptance of the image of the ocean depths as serene and undisturbed, it is unsurprising, that researchers initially greeted the evidence for powerful deep-sea storms and dynamic currents with, disbelief. The earliest arguments in support of the existence of such powerful deep-sea currents were based, on models of ocean circulation derived from hydrodynamic theory. Because the density of cold water is greater, than that of warm water, cold water tends to sink. Thus, near the poles, the chilly water sinks; in theory, this, sinking should create powerful, regular deep-sea currents flowing from the poles toward the warm equatorial, regions. Over time, investigators have gathered sufficient evidence to confirm the accuracy of this theory., Oceanographic studies have verified that deep-sea currents exist and have demonstrated that, on the western, side of the great ocean basins, periodic underwater storms transporting masses of fine sediment scour the sea, floor. Corroborating these studies, photographs of the sea floor have disclosed the existence of vast graded, beds suggesting the active transport of large volumes of silt and clay. Further corroboration has come from an, experimental program known as the High-Energy Benthic Boundary-Layer Experiment (HEBBLE)., , • A quick reading of the passage tells us that the topic is about ‘deep sea currents’ and the, related research, • Phrases such as powerful deep-sea storms and dynamic currents, no surprise, disbelief,, arguments, models of ocean circulation derived from hydrodynamic theory, oceanographic, studies, over time, deep-sea currents exist, corroborating, further corroboration, HEBBLE,, enable us to guess that though initially the existence of deep sea currents were not, believed by scientists, over the years, they started accepting it because of the various, studies conducted. We can also predict that the author will talk about the HEBBLE, experiment in the next paragraph., • After identifying the phrases, we can recall the topic once again and try to paraphrase, the details in our mind, • If we have some knowledge on the characteristics of liquids with different density we, can understand the principle: Because the density of cold water is greater than that of warm, water, cold water tends to sink. Thus, near the poles, the chilly water sinks; in theory, this, sinking should create powerful, regular deep-sea currents flowing from the poles toward the, warm equatorial region., https://abdullahsurati.github.io/bscit
Page 237 :
232, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , UNDERSTANDING THE GIST, When you try to get the general meaning from a text without concentrating on the individual, words, you are reading for gist. In other words, when you read a passage, if you are able to, understand its core meaning or main theme, you have understood the ‘gist’. You might have, observed that you could understand the gist of some passages in the first reading itself. For, instance, when you read a passage on environmental pollution, you may understand the core, meaning at the first reading itself, whereas when you read a passage on American Civilization, or Nuclear Power, you might not be able to do so., There may be several reasons for this ability or inability to understand the gist at the first, reading. Your previous knowledge about the topic would certainly enhance your capacity to, get the gist quickly. At the same time, if you are not familiar with the topic and the passage is, complex, you may take more time to get the gist. However, for proceeding further with your, reading activity, understanding the gist is very important., Now, let us discuss how to go about understanding the gist of the passage. Each passage, that you read will include some main ideas supported by adequate details. If the passage is a, paragraph, it will have one main idea and various details to substantiate that idea. If the passage, is long, it may generally talk about the main idea in the first paragraph and may contain the, subordinate ideas in each of the remaining paragraphs. The concluding paragraph will once, again emphasize the main idea. Each of the subordinate ideas will be supported by adequate, details contained in a number of sentences. Hence, in order to understand the gist you need to, identify essentially the main idea or theme of the passage and the subordinate ideas and also the, relationship between the ideas and the supporting details. You can do this by posing questions, such as what does the author want to say or what the topic is about., Usually, you can find the main idea within the first one-third of the passage. The title or, the main heading of a text, if any, can also give a clue to the content. You can also look for, repetition of certain important terms or their synonyms that may help you identify the main, topic. Similarly, the topic sentences of each paragraph can help in identifying the central idea., Each paragraph will have a subordinate idea that you can find either in the beginning of that, paragraph or at its end. You may also glance over the beginning of the text to identify its logical, organization as mentioned in the previous discussion on skimming., With these strategies, you may be able to get the gist of your reading text or passage. Read, the following passage carefully with a view to get its gist. Then go through the discussion that, follows., Communicating through Space, One way that people can communicate with one another is by manipulating the space between them. People, have a very strong sense of personal space that surrounds them and are greatly discomforted when it is invaded., Crowded subway cars, for example, may be experienced as psychologically uncomfortable, and outbreaks of, aggression are more likely in crowded situations., Edward T. Hall studied attitudes toward physical proximity in several cultures. He found that people from, different cultures vary in the degree of closeness that they will tolerate from strangers or acquaintances., Americans seem to require more personal space than any other people—a distance of at least 30 to 36 inches,, unless the relationship is a very intimate one. American travellers to other countries find that the inhabitants, stand almost offensively close. But people in these cultures are apt to consider Americans—who are always, backing away when one tries to talk to them—disdainful and rude., https://abdullahsurati.github.io/bscit
Page 238 :
https://abdullahsurati.github.io/bscit, , READING COMPREHENSION, , 233, , Hall suggests that there are four distinct zones of private space. Intimate Distance is the zone which extends, up to 18 inches from the body. It is reserved for people with whom one may have intimate physical contact., Personal Distance is the zone which extends from 18 inches to 4 feet. It is reserved for friends and acquaintances., Some physical intimacy is permitted within this zone, such as putting one’s arm around another’s shoulder or, greeting someone with a hug, but there are limits. Social Distance is the zone which extends from 4 to 12 feet. It, is maintained in relatively formal situations, such as job interviews. There is no actual physical contact within this, zone. Public Distance is the zone which extends for 12 feet and beyond, and is maintained by people wishing, to distinguish themselves from the general public. Speakers addressing an audience, for example, maintain this, distance., (Source: Roberta Steinberg, Complete Tools for the TOEFL Test, p. 313, McGraw-Hill, New Delhi, 2006), , You might have identified that the main topic of this passage is ‘communication can take, place by using the space that is maintained between the speaker and the listener in various, ways’. You would have done this by identifying the title (as this passage has a title) and also the, first sentence. Then you would have got the gist of the passage by identifying the topic sentences, (here the first sentence) of the second and third paragraphs. So, the gist of the passage according, to you might have been as follows: ‘Communication can take place by using the space that is, maintained between the speaker and the listener in various ways. The space communication is, affected by cultural variations and it is of four types.’, To sum up the discussion, we can say that you should carefully read the following in order to, understand the central idea of a text:, • The title or the main heading, • The topic sentence of each paragraph, , • The opening paragraph, • The last paragraph, , SQ3R READING TECHNIQUE, Some of us read the texts several times to understand them and in this process we lose time. In, order to reap maximum benefit out of our reading time, we can make use of the SQ3R reading, technique—survey, question, read, recite, review. George Bernard Shaw said: ‘Question, Examine,, Search’ in order to understand things in their right perspective. On the same lines we can say, that reading comprehension also needs certain steps in order to understand and interpret the, given text. The functions of the SQ3R technique enable us to get an idea about the structure and, organization of the text and show us the direction in which we need to proceed further. Let us, look at the constituents of this reading technique in little more detail., , Survey, Just like we try to understand a problem before attacking it in order to find a solution, we, need to get an overview of the text before finding out answers for the given questions. Get an, overview of the text by, •, •, •, •, •, , Reading the title, contents, headings and subheadings, Reading the chapter summaries, Looking at the illustrations, their captions, etc., Making a note of highlighted words, sections, etc., Reading the introduction and conclusion, , https://abdullahsurati.github.io/bscit
Page 239 :
234, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , We can assume that surveying a text is more or less equal to scanning the text as detailed, in an earlier section of this chapter. Surveying the text also helps us to judge our background, knowledge related to the text., , Question, Many a time we pose questions to ourselves to clarify something. For instance, when we look, at our passport we ask ourselves, ‘Is my name typed correctly? What is the expiry date? When, should I apply for a re-issue?’ Such questions enable us not only to get a clear picture of the, given information but also enable us to check the details. Similarly, while reading a text, we, should ask questions on its contents. Assume that you are reading the following paragraph in, a text:, The flow direction of refrigerant through a heat pump is controlled by valves. When the refrigerant flow is, reversed, the heat exchangers switch function. This flow-reversal capability allows heat pumps either to heat, or to cool room air., ‘Reading without reflecting, is like eating without, digesting.’, , –Edmund Burke, , After reading these lines, we could ask ourselves this question to check, our understanding: ‘What is it that allows heat pumps to heat or cool, room air?’ When we ask questions while reading each paragraph, we may, be able to get the main points of the text. We may also grasp well the, sequence of ideas presented in the text., , Read and Recite/Recall, Once we survey and question, we should read the text focusing on the main points. We may, have to slow down our reading speed in case of certain dense or complicated texts whereas we, may read fast the simple texts. Making notes while reading may be helpful to understand and, interpret the texts. Read the guidelines given in the section on note-making., Just as we retain some information regarding places, people or products by recollecting the, details when we had come across them earlier, we need to recall the main points and supporting, points once we finish the reading and note-making processes. At this point, we may try to recall, the supporting points for each of the main points and recite them/speak them aloud in our own, words. We may even write down the points. But we should not copy from the passage but use, our own words to recite or write. For instance, in the following text, you may see that there are, two supporting points for the main point, which is ‘getting more corneas’, contained in the first, two sentences., Getting more corneas for the blind is a difficult choice. Two types of solutions have been proposed for getting, more corneas. One answer is to impose compulsory eye donation on patients dying in hospitals. The other, answer is to educate the masses through vigorous campaigns for voluntary post-death eye donations., , Reading and recalling steps in the SQ3R technique enable us to retain most of the, information in the text., , Review, After completing steps 1 to 4 we can move on to the last stage namely, ‘review’ of SQ3R, technique . At this stage, first, we need to test ourselves by covering the key points whether we, remember them. If we are successful in this attempt, we can check the correctness by referring, to the text. Otherwise, we can reread or expand our notes or discuss with our friends the main, https://abdullahsurati.github.io/bscit
Page 240 :
https://abdullahsurati.github.io/bscit, , READING COMPREHENSION, , 235, , points. These steps will enable us to review the text and its salient points. Go through the solved, reading comprehension exercises in the CD (text supplements) and then assess your skills., , STUDY SKILLS, Besides employing various techniques while reading a text, you need to apply certain skills in, order to make the most of your comprehension. These skills may be useful in answering your, reading comprehension questions. Two important skills, namely note-making and sequencing, of sentences are discussed in this section., , Note-making, Note-making is a systematic process of writing down important information, ideas, facts,, viewpoints, and arguments contained in a written text for future reference. Note-making is, necessary to recall the main ideas in what you have read as you may not be able to keep in, mind all important information contained in a variety of material you may be reading. You, would need to develop qualities such as quick comprehension, identification of main ideas, and, recognition of their relevance to your needs, besides an ability to record them with quickness, and precision. The following are some formal note-making methods:, • Outline/linear method, • Sentence/categorical method, • Schematic/mapping method, , We will discuss each of these methods for making notes from the following passage on, Indian economy., Indian Economy, Just over a decade after the Indian economy began shaking off its statistic shackles and opening to the outside, world, it is booming. The surge is based on strong industry and agriculture, rising Indian and foreign investment, and consumer spending by a growing middle class. After growing just 4.3 per cent last year, India’s economy is, widely expected to grow close to 7 per cent this year., The growth of the past decade has put more money in the pockets of an expanding middle class, about 30, crores strong, and with more choices in front of them, their appetites are helping to fuel demand-led growth, for the first time in decades., India is now the world’s fastest growing telecom market, with more than ten lakh mobile phone subscriptions, each month. Indians are buying about 10,000 motorcycles and scooters a day and 20,000 cars per month. Banks, are now making two crores a year in home loans, with the lowest interest rates in decades and thus helping to, spur spending on building. Credit and debit cards are slowly but steadily gaining momentum., The potential for even more market growth is enormous, a fact recognized by multinational and Indian, companies alike. For example, in 2001, according to census figures, only 31.6 per cent of the country’s 18 crore, households had a television, and 2.5 per cent a car, jeep, or van., , Outline/Linear method, In this method, you need to identify the main ideas and the corresponding main and subsidiary, points from the reading text and arrange them in a table consisting of two columns. Use the first, column for writing down the main ideas and the second one for the corresponding main and, subordinate points of each main idea. You can distinguish between the main and subordinate, points by using indentation or two levels of bullets, as shown below., https://abdullahsurati.github.io/bscit
Page 241 :
236, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Boom in economy due to liberalization, , Growth spurred by demand, , India—fast-growing market, , Enormous potential for further growth, , • Liberalization of economy, ◊ strong industry, ◊ strong agriculture, ◊ rising investment, ◊ consumer spending by growing middle class, ◊ expected growth this year 7 per cent from 4.3 per cent, last year, • Demand, ◊ demand-led growth because of consumer spending by, growing middle class (30 crores), ◊ more money, ◊ more choices, ◊ more demand, • India—fast-growing market, ◊ 10 lakh mobile phone subscriptions each month, ◊ 10,000 motorcycles and scooters sold daily, ◊ 20,000 cars sold per month, ◊ banks earning 2 crores in home loans, • Potential for further market growth enormous, ◊ in 2001 only 31.6 per cent households (18 crore) had a, television, ◊ only 2.5 per cent owned a car, jeep, or van, , Sentence method, In this method, also known as the categorical method, sentences are used to represent the, main idea and subordinate ideas. Generally, the text contains one main idea/thought/fact in, one paragraph and this is supported by several, Ravi, please, supporting points. You will have to identify the, ‘Ravi, please, stand up!, main and subordinate ideas and write them, stand up!’, as short sentences. As mentioned earlier, you, may be able to identify the topic sentence in, each paragraph. All you have to do is to write, the topic sentence in your notes, after editing, it, if necessary. Then you should identify the, sub-points and write them down below the, sentence containing the main point. You might, have observed that this method resembles the, linear method, the only difference being the, use of sentences in place of words or phrases,, Ravi’s notes are always complete. He never misses a thing the, as shown below for the passage on Indian, teacher says., economy., • There is a boom in Indian eco-nomy due to liberalization., – It is based on strong agriculture and industry., – There is an increase in Indian and foreign investment., – There is greater consumer spending, especially by growing middle class., https://abdullahsurati.github.io/bscit
Page 242 :
https://abdullahsurati.github.io/bscit, , READING COMPREHENSION, , – The growth rate expected this year is 7 per cent., • The growth has been spurred by demand., – There is greater consumer spending by growing middle class (about 30 crore)., – There are more choices, more money, and, hence, more demand., • India has become a fast-growing market., – 20,000 cars are sold and 10 lakh mobile phone connections are issued every month., – 10,000 motorcycles and scooters are sold everyday., Banks are earning about 2 crore as interest on home loans every month., • There is enormous potential for further growth., – In 2001, only 31.6 per cent of households had TV., – In the same year, only 2.5 per cent owned a car, jeep, or van., , https://abdullahsurati.github.io/bscit, , 237
Page 243 :
238, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Schematic/Mapping method, You must be aware of mind-mapping technique used for categorizing your ideas on a particular, topic where you use circles, blocks, and arrows to represent various main and subordinate ideas., The schematic or mapping method also is a semi-graphic representation of the contents of a, text to show the relationship of each point or idea to other facts and ideas contained therein. In, fact, this method has an edge over other methods as you can record a great deal of information, in less space and also show the complex relationships among several ideas and facts. Given, below are some tips on using this method for your note-making tasks:, •, •, •, •, , Represent the main ideas in a central box/circle., Depict the subordinate ideas as though they are radiating from this central image., Use branches attached to the higher-level branches to represent further minor points., Ensure that the branches form a connected nodal structure., , Practice 1, Read the following passage and make notes from it. You can use any of the three methods explained in, the preceding discussion., The march of scientific mechanization over industry, throughout the world, is unabated, so is the, misery of the poor. Equally unchecked is the thriving of a few among the upper rungs of industrial, hierarchy and the bureaucratic and political echelons. One feels proud of the scientific innovations, in the manufacturing process where manpower is speedily being replaced by capital potential. The, researches in the field are so swift that the labour factor is gradually being eliminated. Automation, has withdrawn hazards from man but has offered him unemployment. In the progressing countries,, where there is no check on population, scientific industrialization has become an eye sore on the, job front. It has resulted in long queues at the employment exchanges., Scientific industrial development has proved manna for the progressive countries of Western, Europe, Canada, the USA, and Japan. They reap certain advantages over the backward nations. It, has provided a luxurious life even to the common man there. Scientific researches result in mass, production of commodities. Thus, the West has a huge surplus of finished goods to flood the world, market and to reap profits. The resultant economic growth in these countries enables them to, proceed with further scientific researches to make their industries more capital oriented. Thus they, always have an advantage over the backward countries., Notwithstanding the backwardness or poverty, scientific industrialization is responsible for an, increase in the gross national product in progressing countries like India too. But it creates twofold problems. The advantages of this increase in gross national product are reaped by the rich for, it is they who have invested money. The growth of capital too is their prerogative. The profits and, interest go to the coffers of the industrialists. The fruits of progress and mechanization do not go the, poor. It is only a class—a group that benefits from the scientific development not all., (Source: Bhatia,. M.P., A Handbook of Applied Grammar and Composition, 8th Edition, p. 138, M.I., Publications, Agra, 2005), , Understanding Discourse Coherence, The term discourse refers to a serious speech or a piece of writing on a particular subject, and the term coherence refers to the logical development of ideas within a text and it is an, important sub-skill for you to be aware of. A coherently structured discourse is assumed to be, a collection of sentences, and in turn paragraphs, that are ordered such that they make good, https://abdullahsurati.github.io/bscit
Page 244 :
https://abdullahsurati.github.io/bscit, , READING COMPREHENSION, , 239, , sense in some relation to each other. We usually expect written texts to be coherent, meaningful, communications in which the words and/or sentences are linked to one another., Incoherence can arise from too much or too little information as well as from incorrectly, ordered sentences or thoughts. It is important to ensure that the reader understands the relation, between the various thoughts expressed in a discourse. We normally use our own interpretations, and perceptions of familiar situations and concepts while reading/hearing discourses of interest., Therefore, it must be ensured that there is no scope for ambiguity, especially in technical discourses., To clearly express the relationship between the various segments of a discourse, and thereby, effectively communicate the intended meaning, you can use a variety of expressions such as the, following:, but, yet, so, as, and, since, while, similarly/likewise/in the same way, on the other hand/on the contrary/, contrariwise/whereas/while/however/yet/although/nevertheless/nonetheless/whereas/unlike/despite/in spite of/, even so, therefore/as a result/as a consequence/consequently/thereby/thus, because/due to/on account of/, inasmuch as, though/although/even though, in addition/moreover/furthermore, either…or, neither…nor, of, course, in fact/clearly/evidently/obviously/actually/indeed/surely/certainly, so that/so as to/in order to, in other, words/that is/to put it differently/to repeat/namely, for instance/for example, hence/in conclusion/to sum up/, at last/finally, , These words are known as transitional words or phrases that join one idea to another idea., You can use transitions within a paragraph as well as between paragraphs. They help your, reader to follow from one idea to the next smoothly. These words/phrases are also known as, connectors, markers, or signal words., Discourse markers help you develop ideas and relate them to one another. They indicate how, one piece of text is connected to the other. They show the connection between what has already, been written and what is going to be written. But remember not to overuse these markers, as, doing so would not only make the style of your text artificial but also affect its smooth flow. A, few examples of discourse markers that provide coherence between various parts of the text are, discussed below., Example 1, The following expressions are used to focus on the contrast or contradiction between two ideas, or issues, On the one hand …on the other hand, on the contrary, nevertheless, nonetheless, whereas, despite,, in spite of, despite, however, yet, although, while., By emphasizing the contrast, you can signal the switch of direction in your argument., 1. Most of the students enjoy doing chemistry experiments in the lab. On the other hand, they hate, performing physics experiments., 2. Some people prefer to spend most of their time alone. However, some others enjoy most of their, time in the company of their friends., 3. On the one hand, we have people who are without work and, on the other, we have countless jobs, which are not being done., , Example 2, Markers such as in addition to, furthermore, moreover, as well as, also, too, neither… nor, nor, and, neither are used to show addition. You can use them to signal the reader that you are about to, add an additional reason or example to substantiate your claim. See the following examples:, , 1. First, they have a desire to conquer nature to achieve the most difficult and most impossible task., Moreover, their spirit of adventure and interest in exploring unknown places provide them the, impetus to go mountaineering., https://abdullahsurati.github.io/bscit
Page 245 :
240, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , 2. Minicomputers are the cheapest, smallest, and slowest. In addition to these advantages, they rarely, occupy more than one room and are often used for a particular kind of work such as data analysis, in a research laboratory., , Example 3, You can use expressions such as as a result, as a consequence, consequently, thereby, thus, therefore,, and hence to show the effect or result of an action., , 1. Scientists have worked hard to develop ways to decrease infant mortality rate and increase, longevity. As a result, more people are living longer and scientists will soon have to develop some, methods with which to control overpopulation., 2. The team completed the given assignment in record time and proved their efficiency. Consequently,, the company appreciated their efforts and offered them few more prestigious projects., , Example 4, The expressions such as regarding, with regard to, with respect to, as regards, as far as … is concerned,, and as for are used to draw your readers’ attention to something that you are going to say next., Among these expressions as for, as far as … is concerned, and as regards would enable you to, inform your readers in advance that there will be a shift in the subject. Look at the following, sentences:, 1. This manual provides you with all guidelines pertaining to the working of automatic grinders. As, for/as regards the manual grinders, you need to look into the supplementary booklet., 2. This company is reputed for its purification process for various liquids. As far as the purifi cation of, water is concerned, it needs to resort to a different method., 3. With regard to/regarding/with respect to this new technology developed by our research division, I, would like to specify that it could withstand high temperatures., , From the preceding discussion, we can say that a text is coherent when it flows smoothly in a, clear direction and when all the sentences are logically arranged., The following points need to be kept in mind in order to achieve discourse coherence:, • Avoid using too many short, choppy sentences., • Organize your sentences in a logical sequence., • Use transitions that suit your purposes, taking care to avoid their overuse., , Example of incoherent paragraph, , Canadian software companies face several tough challenges in the new millennium because of ‘brain drain’,, the weak Canadian dollar, and the monopoly held by their American counterparts. However, the Canadian, dollar continues its downward spiral even today. ‘Brain drain’ is a bad thing. Our greatest resources are leaving., Microsoft is squeezing out its competitors. In comparison, if the ‘brain drain’ continues, Canadian companies will, find it difficult to produce innovative software. The weak dollar will hurt us. It will help the Americans., (Source: http://www.writingcentre.ubc.ca/workshop/tools/unity.htm), , The paragraph above is incoherent because it uses choppy sentences ineffectively, arranges the, ideas illogically, and uses transition words in improper contexts. The following paragraph is an, example of a coherent paragraph., Example of coherent paragraph, , Canadian software companies face several tough challenges in the new millennium because of ‘brain, drain’, the weak Canadian dollar, and the monopoly held by American corporations. ‘Brain drain’ is a, catchy new term for the practice of American companies enticing brilliant Canadian doctors, scientists,, researchers, programmers, and business people to cross over the border into the United States. The US, firms lure Canadian talent with the strong American dollar and the competitive research and business edge, https://abdullahsurati.github.io/bscit
Page 246 :
https://abdullahsurati.github.io/bscit, , READING COMPREHENSION, , 241, , that many such companies have as a result of industry monopolies. Simply put, Canadian companies are being, soundly beaten because they find themselves on a playing field that is no longer level., (Source: http://www.writingcentre.ubc.ca/workshop/tools/unity.htm), , Notice how each sentence flows logically into one another. The paragraph stays consistent with, both the content and the organization of the topic sentence., , Practice 2, The passage given below does not include adequate discourse markers for coherence. Combine/, rearrange sentences if necessary and use appropriate transitional words/phrases so as to make the text, coherent:, The ancient Egyptians were masters of preserving dead people’s bodies by making mummies of, them. Mummies several thousand years old have been discovered nearly intact. The skin, hair, teeth,, fingernails and toenails, and facial features of the mummies were evident. It is possible to diagnose the, disease they suffered in life, such as smallpox, arthritis, and nutritional deficiencies. The process was, remarkably effective. Sometimes apparent were the fatal affl ictions of the dead people: a middle-aged, king died from a blow on the head and polio killed a child king. Mummification consisted of removing, the internal organs, applying natural preservatives inside and out, and then wrapping the body, in layers of bandages., , Sequencing of Sentences, The process of sequencing the sentences in a text or, in other words, arranging the order in, which the sentences need to logically appear in a text, is closely related to what you have learnt, just now, that is, discourse coherence. If you are clear about the concept of discourse markers, you may be able to identify the order in which the sentences need to be organized in a text., Look at the following paragraph:, In Chapter 3, we report a study that found that subjects perceive as variable units only what the theory claims is, a unit. Another series of crucial studies is the comparison and contrast experiments reported in Chapter 4, which, shows that we do not distinguish complex concepts of different lengths as some current theories do. To a great, extent, we have succeeded in showing our theory is valid. Our main concern was to empirically test the theory, that forms the background for this work. Chapter 2 reports a study which shows that the rate of perceiving, variations in length relates directly to the number of connectives in the base structure of the test., , Are the sentences logically organized? No. What has gone wrong and how can you rectify, this mistake? Given below are some steps to arrange the sentences of the text in a logical and, coherent manner:, • Read all the sentences and try to identify the topic sentence., • Place it in the beginning of the text/paragraph., • Look for discourse markers such as signal words, pronouns, repetitions, synonyms, etc., , Here is the revised version beginning with the topic sentence and containing the supporting, sentences in a logical order:, Our main concern was to empirically test the theory that forms the background for this work. To a great extent,, we have succeeded in showing our theory is valid. Chapter 2 reports a study which shows that the rate of, perceiving variations in length relates directly to the number of connectives in the base structure of the test. In, Chapter 3, we report a study that found that subjects perceive as variable units only what the theory claims is a, unit. Another series of crucial studies is the comparison and contrast experiments reported in Chapter 4, which, shows that we do not distinguish complex concepts of different lengths as some current theories do., https://abdullahsurati.github.io/bscit
Page 247 :
242, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Practice 3, Rearrange the following sentences in a logical and sequential way so as to make a coherent paragraph:, (a) The dual purpose bicycle has a permanent attachment and modified broad stand cum carrier., (b) There are two types of pedal power devices in existence today., (c) This modified bicycle is called a dual-purpose bicycle., (d) It can also be used to power a drill, a woodworking lathe, and a circular saw., (e) The second type of pedal power device is a modified bicycle, which can be used both as a, vehicle for transportation as well as power production., (f ) Some examples are paddy threshers, winnowers, groundnut shell removers, small waterpumps, and grinders., (g) This rotary motion can be used to operate machines such as threshers, winnowers, pumps,, woodworking lathes, and metal lathes., (h) The first type is a stationary one, in which bicycle parts such as the frame, crank, chain, and free, wheel are used to produce a rotating notion., , SUMMARY, How we are reading a text is as important as what we, are reading. By skimming and scanning a text we may, be able to get its gist. In addition, by applying certain, other techniques such as summarizing, predicting the, content, and anticipation, and by practicing certain, study skills, such as note-making and sequencing, , sentences in a text, we will be able to improve, the effectiveness and efficiency of our reading, comprehension. Besides using all these techniques,, we can also use the SQ3R reading technique to, enhance our reading comprehension skills., , EXERCISES, 1. Read the following passage and then answer the, questions that follow:, It is like a horror movie without an end. Scenes of, death and devastation brought on by the ‘worst, ever quake to hit the country since independence’, are now etched permanently in our memory. On, the morning of January 26, 2001, the unstable, earth under the Rann of Kutch in Northern Gujarat heaved and collapsed causing an earthquake, recorded 6.9 on the Richter scale (China recorded, 7.4 and the U.S. measured 7.9 due to different, methods of calculation). But no scale can possibly measure the magnitude of the desolation, and sorrow that the killer quake left behind in the, villages, towns, and cities of Gujarat. Places like, Bhuj, Anjar Bachau, and Sukhpar have been completely flattened. Buildings collapsed trapping, thousands of people in the rubble and left the, , survivors with nothing to live for. We saw the griefstricken faces of those who had lost their families,, distraught men, women, and children huddled in, the open in the cold night, and terrified villagers, on foot desperately looking for places that might, be safe., What causes an earthquake? The surface of the, earth is made of huge plates. They slowly move, over, under, and past each other. Sometimes, the, movement is gradual. At other times, the plates, lock into one another unable to release the energy created by the movement. When this accumulated energy grows strong enough, the plates, break free and snap into a new position. Vibrations, make the structures around quiver and shake and, fall. The fracture in the earth’s crust is called a, ‘fault’. If all the stress has not been released, more, tremors (aftershocks) can occur in the fault zone., , https://abdullahsurati.github.io/bscit
Page 248 :
https://abdullahsurati.github.io/bscit, , The epicentre is the point on the earth’s surface, directly above where the quake is focussed., Earthquakes can occur beneath the ocean floor., Then immense waves (tsunamis) as high as 15 metres caused by the freed energy travel across the, waters at great speed and reach the shores. They, engulf the coastal areas and cause severe damage. India has a grim history of earthquakes. Calcutta (1737, 300,000 dead) and Assam (l897) saw, the worst of them. A series of tremors ravaged, Udaypur, Uttarkashi, Chamoli, Latur, and Jabalpur, in the last twelve years. The Rann of Kutch itself, lost 2000 people in the 1819 quake and again, in 2001 the death toll was close to 20,000. Dams, built in the quake-prone areas, concentration of, population, decrease in groundwater level can all, be reasons for these disasters, say environmentalists. Dr R. Bilham of Colorado warns that because, of the southward movement of the surface, 60, per cent of the Himalayas are overdue for a quake., (a) Say whether the following statements are true, or false:, (i) Rann of Kutch suffered earthquake in the, year 1897., (ii) Earthquake in the ocean causes huge, waves up to 15 metres., (iii) The Himalayas are prone to earthquake., (iv) Calcutta and Assam saw the worst, earthquake in the last 12 years., (v) Dr R. Bilham of Colorado is an environ, mentalist., (b) Write short answers within one or two, sentences:, (i) What do you mean by fault?, (ii) What is epicentre?, (iii) State a few reasons for the cause of an, earthquake?, (iv) In correct chronological order, mention, the places affected due to earthquake., (c) Choose the most appropriate answer:, (i) Which one of the following is not a cause, for earthquake?, • Dams built in the quake-prone area, • Concentration of population, • Decrease in groundwater level, • Himalayan mountains, (ii) The exact intensity of 26 January earthquake, in Kutch was, , READING COMPREHENSION, , 243, , • 6.9 in Richter scale, • 7.4 in Richter scale, • 7.9 in Richter scale, • 6.7 in Richter scale, (d) Complete the following sentences:, (i) The worst earthquake that hit in de, pendent India is ____________., (ii) Tsunami is the name of __________., (e) Fill in the blanks with suitable words:, (i) Because of the __________ movement,, 60% of the Himalayan region is overdue, for a quake., (ii) Another name for an earthquake is, ____________., 2.(a) Scan the passage on ‘Extraction of Gold’ given, below quickly to identify the types of mining, and the ways of obtaining pure gold. Then fill, the blanks in the following sentences:, (i) Two types of mining are _____________ and, ___________ ., (ii) Three ways of obtaining pure gold are, __________, __________, and __________., , Extraction of Gold, The method of mining gold varies with the, nature of the deposit. Two types of deposit, can be considered here: one is placer deposit,, which refers to the occurrence of gold in, particles in the sand or gravel in the bed of a, river; the other is lode mine, which refers to, gold occurring as veins in gravel or rock. In, placer mining, the separation of gold from, gravel or other impurities is done by sifting., Hand panning is also common, in which water, and gold-containing gravel are swirled in a, pan. Gold, being heavy, settles down, and the, gravel is washed away. In lode mining, shafts, are dug into the rock following the veins of, gold. Using explosives, the rock is broken and, the ore is obtained. The ore is then transported, to mills., In milling, the ore is first crushed using, heavy machines. This is followed by sluicing,, that is, using water to wash the ore into sluices, or artificial water-channels in which there are, grooves which trap the gold., There are three ways in which this gold is, treated to obtain pure gold. They are floatation,, amalgamation, and cyanidation. In the first, method, a frothing agent is added to produce, , https://abdullahsurati.github.io/bscit
Page 249 :
244, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , foam. A collecting agent is used to produce a, film on the gold, which then sticks to the air, bubbles. Gold is then separated from the top., In amalgamation, the ore, mixed with water, to form a pulp, is collected on a copper plate, covered with mercury. The mercury is then, removed, partly by squeezing it out and partly, by distillation. The cyanide process is now, widely used. In this process, a weak solution, of sodium, potassium, or calcium cyanide, is used to dissolve the gold. The gold is then, precipitated by the addition of zinc dust., The gold thus obtained is smelted and, cast into bars., 3. Read the following passage and answer the questions that follow as directed:, The Fight against Wound Infections, In 1865, the British surgeon Joseph Lister (1827–, 1912) succeeded in devising for the first time a, truly antiseptic principle for treating wounds. Until the middle of the nineteenth century, surgery, was not only a very gruesome trade—as there, was no general anesthesia before that time—but, also a dangerous method of treatment, which, was always followed by a protracted and often, fatal infection., The patients died even after the slightest operation. All wounds suppurated, and in the hospital wards the sweetish smell of pus everywhere, prevailed. The ancient doctrine that this was, ‘good and laudable pus’, and must, therefore, be, regarded as a sign of the favourable healing of the, wound, was not yet dead., In the hospitals of Lister’s time, ‘charpie’ was, used as a dressing. Charpie was made out of, old linen cloth, which had become easily teased, through frequent boiling, and attendants and, patients who were not very ill teased out threads, of varying lengths and thicknesses; and these, threads were then brought together again to, make a soft, absorbent material. Before it was, used to pack a wound or as a dressing, the charpie, was washed only with cold water without soap—, and often it was not washed at all. The instruments and the sponges used to staunch blood, were likewise washed only in cold water., Like all surgeons in all countries Lister was troubled by the fact that a compound fracture—that, is, a fracture in which one or both of the broken, ends of the bone has pierced the overlying skin, , and soft tissues—never did well, and that in such, cases, amputation of the limb nearly always had, to be performed. Further, in all countries, the mortality rate from septic diseases after amputation, varied between 30 per cent and 50 per cent., This was a dreadful state of affairs. As a preliminary to an attack on this problem, Lister had long, been carrying out important work on inflammation and the behaviour of the blood during that, process. He was led to the conclusion that wound, suppuration was decomposition (or putrefaction), brought about by the effect of the atmosphere, on blood or serum contained in the wound. But, Lister was handicapped by the belief, widely held, at that time, that putrefaction was due to oxygen, in the air. He spent much time trying to exclude, the air from wounds but not unexpectedly, these, efforts were unsuccessful. Then in 1865 Lister, learned for the first time about the important, work of the French chemist Louis Pasteur (1822–, 1895) on that ‘organized corpuscles’ (i.e., living, bacteria) are present everywhere in the air. This, was the clue for which Lister was searching. He, deducted that in the case of septic or ‘putrefying’, wounds, it was not the air itself but the organisms, in the air which caused the sepsis., Lister decided that these organisms must be, killed before they obtained access to the wound., He tested the killing effect of a number of substances on bacteria; and after very careful experiments, he decided to use carbolic acid, not only, as a wound-dressing, but in a systematic manner, so as to prevent suppuration entirely in the part, concerned. The hands of the surgeon and his assistants, and also all the instruments to be used,, were soaked in a solution of carbolic acid. So also, was the wound itself, and Lister did a lot of research in order to find suitable materials for dressings which would give off the carbolic acid slowly, into the wound. For many years also Lister had, the atmosphere in the operating theatre sprayed, with a fine mist of carbolic acid, and the spray was, also used during the change of a dressing. But it, was later shown that the spraying of the atmosphere was not necessary., Having, after these experiments, decided on, the method he would employ, Lister tried out his, new principle on 12 August 1865 in the treatment, of a compound fracture in a patient in his ward in, , https://abdullahsurati.github.io/bscit
Page 250 :
https://abdullahsurati.github.io/bscit, , the Glasgow Royal Infirmary. A perfect result was, obtained. Two years later Lister published a series, of cases treated by the aid of his principle, and, within a short time he was performing operations, which previously, because of the danger of sepsis,, would not have been undertaken by any surgeon., Lister’s methods soon found favour in Scotland,, but English surgeons were very slow to adopt, them. It is to the credit of German surgeons that, they understood, perhaps more quickly and more, thoroughly than any other, the revolution in surgery which Lister had effected. His antiseptic principle was enthusiastically supported in Germany, and it led to the great technical advances of German surgeons., (Source: Pollak, K. and Underwood, E.A., The Healer, Nelson, 1968), (a) Complete each of the given sentences with a verb, from the following list. Use each verb only once., supported, performed, undertaken, deducted,, soaked, led, sprayed, followed, varied, troubled, obtained, effected, (i) In the middle of the nineteenth century a, surgical operation was __________ dead., (ii) Lister was __________ by the fact that in the, case of compound fracture, the affected limb, had to be removed., (iii) The mortality rate after amputation _______, from 50 per cent to 30 per cent., (iv) Lister was __________ to believe that pus was, formed by the effect of the atmosphere on, the blood or serum contained in the wound., (v) Lister __________ that organisms in the air, caused sepsis., (vi) Lister __________ a perfect result when, he applied the antiseptic principle on the, treatment of a compound fracture in a, patient., (vii) Lister __________ all the instruments in a, solution of carbolic acid before they were, used for any surgical operation., (viii) Lister ensured that the atmosphere in the, operating theatre was __________ with, carbolic acid., (ix) In Lister’s time, surgery was _________ in, very bad conditions., (x) Lister began to do such operations which no, one would have _________ some years back., , READING COMPREHENSION, , 245, , (b) A doctor who performs operations is called a surgeon. Try to match the name of the specialist in, the left column with his/her specialty in the right, column., , Name, Specialty, (i), ophthalmologist, women’s diseases, nature of diseases, (ii), neurologist, skin, (iii) cardiologist, mental illness, (iv) dermatologist, illness of children, (v), gynecologist, nerves, (vi) pathologist, heart, (vii) psychiatrist, eyes, (viii) paediatrician, (c) Here is an outline of the main ideas used in the, reading passage. Construct a summary of the passage from these ideas after reading the passage, again., Surgery before 1865 was very dangerous — A, compound fracture never did well —. Morality, rate from these diseases varied between 30 per, cent to 50 per cent — suppuration was caused, by the effect of the atmosphere on the blood —, suppuration was due to oxygen in the air — Lister, learnt from Louis Pasteur that it was not by the, living bacteria — He used carbolic acid —. On 12, August 1865, he successfully experimented with, his new — for treating —. His revolution was —., 4. Use the appropriate form of the words given in the, following list to fill the gaps in the paragraph that, follows., renowned, globe, maintenance, option, survival,, drawback, estimate, objective, disease, contaminated, The India Mark II hand pump is _________ all over, the world. Clean drinking water is the key to human __________. The United Nations __________, that 80 per cent of all __________ in the world are, caused by water. The United Nations’ __________, is to provide clean drinking water for every man,, woman, and child around the __________ by the, year 1990. They considered many but finally decided that a hand pump was the best solution., Older types of pump used before the India Mark, II had a number of __________, for example, they, did not last very long. The India Mark II is very, successful but it has one problem: that is the, __________ of the pump over a period of time., , https://abdullahsurati.github.io/bscit
Page 251 :
246, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , 5. The bar chart given below provides the compara, tive figures of the major sources of information in, the manufacturing organizations of three coun-, , tries, namely, the United Kingdom, Canada, and, the United States. Interpret this chart and write a, paragraph of about 200 words including the comparative analysis., , UK, , US, , 30, 20, UK, , 10, , US, , UK, , Canada, , US, , US, , Canada, , 40, , UK, , UK, , Canada, , 60, , US, , Canada, , 60, , Canada, , Data range (in per cent), , UK, , 70, , Canada, , Perferred as a source (per cent), 80, , US, , 0, Orientation, programme, , Small group, meetings, , Top, executives, , organizational, publication, , Mass media, , The grapevine, , Types of sources, UK, , Canada, , 6. Interpret the line graph given below. It depicts, the training needs (in %) of entry level and the, middle level managers in various areas in an or-, , US, , ganization. Including the information represented by all the three lines in the illustration, write a, paragraph of about 150 words., , Training needs by different levels of management, 50, , Data range (per cent), , 45, 40, 35, 30, 25, 20, 15, 10, 5, 0, Managing peiople, , English writing and, oral presentation skills, , Finance and, accounting, , Computer proficiency, , Areas, Entry-level managers, , 7. Read the following passage and make notes from, it using the mapping method., The use of heat pumps has been held back largely, by scepticism about advertisers’ claims that heat, pumps can provide as many as two units of thermal energy for each unit of electrical energy used,, , Middle managers, , Senior executives, , thus apparently contradicting the principle of energy conservation., Heat pumps circulate a fluid refrigerant that, cycles alternatively from its liquid phase to its vapour phase in a closed loop. The refrigerant, starting as a low-temperature, low-pressure vapour,, , https://abdullahsurati.github.io/bscit
Page 252 :
https://abdullahsurati.github.io/bscit, , enters a compressor driven by an electric motor., The refrigerant leaves the compressor as a hot,, dense vapour and flows through a heat exchanger called the condenser, which transfers heat from, the refrigerant to a body of air. Now the refrigerant, as a high-pressure, cooled liquid, confronts, a flow restriction which causes the pressure to, drop. As the pressure falls, the refrigerant expands, and partially vapourizes, becoming chilled. It then, passes through a second heat exchanger, the, evaporator, which transfers heat from the air to, the refrigerant, reducing the temperature of this, second body of air. Of the two heat exchangers,, one is located inside, and the other one outside, the house, so each is in contact with a different, body of air: room air and outside air, respectively., The flow direction of refrigerant through a heat, pump is controlled by valves. When the refrigerant flow is reversed, the heat exchangers switch, function. This flow-reversal capability allows heat, pumps either to heat or to cool room air., Now, if under certain conditions, a heat pump, puts out more thermal energy than it consumes in, electrical energy, has the law of energy conservation been challenged? No, not even remotely: the, additional input of thermal energy into the circulating refrigerant via the evaporator accounts for, the difference in the energy equation., Unfortunately, there is one real problem. The, heating capacity of a heat pump decreases as the, outdoor temperature falls. The drop in capacity, is caused by the lessening amount of refrigerant, mass moved through the compressor at one time., The heating capacity is proportional to this mass, flow rate: the less the mass of refrigerant compressed the less the thermal load it can transfer, through the heat pump cycle. The volume flow, rate of refrigerant vapour through the single-speed, rotary compressor used in heat pumps is approximately constant. But cold refrigerant vapour, entering a compressor is at lower pressure than, warmer vapour. Therefore, the mass of cold refrigerant and thus the thermal energy it carries is less, than if the refrigerant vapour were warmer before, compression., Here, then, lies a genuine drawback of heat, pumps: in extremely cold climates—where the, , READING COMPREHENSION, , 247, , most heat is needed—heat pumps are least able, to supply enough heat., 8. Read the following paragraph and write down, which words indicate the author’s opinion. Also, explain what his opinion is., There is the first problem with tipping: the, more discretion you have in the matter the, more unpleasant it is. Tipping is an aristocratic, conceit—‘There you go, my good man, buy your, starving family a loaf ’—best left to an aristocratic, age. The practising democrat would rather be, told what he owes right up front. Offensively rich, people may delight in peeling off hundred dollar, bills and tossing them out to grovelling servants., But no sane, well-adjusted human being cares to, sit around and evaluate the performance of some, beleaguered coffee vendor., 9. Read the following passage carefully and answer, the questions in your own words., The most frightening aspect of malnutrition is, that it is likely to cause permanent damage to, the brain. Experiments carried out on animals, suggest that brain damage due to malnutrition, is irreversible. This may not be true of human, beings. Nevertheless, known facts as well as results of tests conducted so far point to alarming, conclusions. The human brain grows very fast., Three months before its birth, the child’s brain, weighs one-fourth of the adult’s brain. In one, year, the brain of a child is already 66 per cent of, the weight of the adult brain. At four years the, brain weighs 90 per cent and at eight the child’s, brain is the size of an adult’s and there is no further increase. Quite obviously the first four years, are crucial for the development of the brain. And, if the child suffers from malnutrition, the damage, to the brain may well be permanent., Fortunately and thanks to the research carried, out by scientists in India and abroad and systematic attempts made by the National Institute of, Nutrition, Hyderabad, to analyse the causes of, malnutrition in this country, one need not wait for, years to solve at least some aspects of the problem., For instance, it was found that the addition, of iodine in the lake-water salt consumed in the, sub-Himalayan region would go a long way to, controlling goitre. Again, experiments made by, the Institute reveal that inexpensive green leafy, , https://abdullahsurati.github.io/bscit
Page 253 :
248, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , vegetables are a good alternative to eggs and, butter as a rich source of Vitamin A., The Institute has also carried out considerable, research into fortification of various foods. Modern bread is a case in point. But since bread is, beyond the means of the poor the Institute has, found some items of mass consumption which, can be strengthened with certain proteins and, amino acids. Fortification of common salt is considered the most promising possibility., Questions, (a) What is the most serious harm that may be, caused by malnutrition in childhood?, (b) Why is good nourishment so essential during, the first four years of child’s life?, (c) What suggestions have been made by the, National Institute of Nutrition for controlling, goitre in certain parts of India?, (d) List the other three suggestions made by, the Institute for curing the ill effects of mal, nutrition., 10. Each passage in this group is followed by questions based on its content. After reading a passage, choose the best answer to each question., Answer all questions following a passage on the, basis of what is stated or implied in that passage., Passage 1, After inventing dynamite, Swedish-born Alfred Nobel became a very rich man. However, he foresaw, its universally destructive powers too late. Nobel, preferred not to be remembered as the inventor, of dynamite, so in 1985, just two weeks before his, death, he created a fund to be used for awarding, prizes to people who had made worthwhile contributions to humanity. Originally, there were five, awards: literature, physics, chemistry, medicine, and, peace. Economics was added in 1968, just sixty-seven years after the first awards ceremony. (5), Nobel’s original legacy of nine million dollars, was invested, and the interest on this sum is, used for the awards which vary from $30,000 to, $125,000. (6), Every year on 10 December, the anniversary of, Nobel’s death, the awards (gold medal, illuminated diploma, and money) are presented to the, winners. Sometimes politics plays an important, role in the judges’ decisions. Americans have won, numerous science awards, but relatively few literature prizes. (9), , No awards were presented from 1940 to 1942 at the, beginning of World War II. Some people have won, two prizes, but this is rare; others have shared their, prizes. (11), (a) The word ‘foresaw’ in sentence 2 is nearest in, meaning to, (i) prevailed, (iii) prevented, (ii) postponed, (iv) predicted, (b) The Nobel Prize was established in order to, (i) , recognize worthwhile contributions to, humanity, (ii) resolve political differences, (iii) honour the inventor of dynamite, (iv) spend money, (c) In which area have Americans received the, most awards?, (i) Literature, (iii) Economics, (ii) Peace, (iv) Science, (d) All of the following statements are true EXCEPT, (i) awards vary in monetary value, (ii) ceremonies are held on 10 December to, commemorate Nobel’s invention, (iii) politics plays an important role in, selecting the winners, (iv) a few individuals have won two awards, (e) In how many fields are prizes bestowed?, (i) 2, (iii) 6, (ii) 5, (iv) 10, (f) It is implied that Nobel’s profession was in, (i) economics, (iii) literature, (ii) medicine, (iv) science, (g) In sentence 3, ‘worthwhile’ is closest in, meaning to, (i) economic, (iii) trivial, (ii) prestigious, (iv) valuable, (h) How much money did Nobel leave for the, prizes?, (i) $30,000, (iii) $155,000, (ii) $125,000, (iv) $9,000,000, (i) What is the main idea of this passage?, (i) Alfred Nobel became very rich when he, invented dynamite., (ii) Alfred Nobel created awards in six cate, gories for contributions to humanity., (iii) Alfred Nobel left all of his money to, science., (iv) Alfred Nobel made a lasting contribution, to humanity., (j) The word ‘legacy’ in sentence 6 means most, nearly the same as, , https://abdullahsurati.github.io/bscit
Page 254 :
https://abdullahsurati.github.io/bscit, , (i) legend, (iii) prize, (ii) bequest, (iv) debt, , Passage 2, Ever since humans have inhabited the earth,, they have made use of various forms of, communication. Generally, this expression of, thoughts and feelings has been in the form of, oral speech. When there is a language barrier,, communication is accomplished through, sign language in which motions stand for, letters, words, and ideas. Tourists, the deaf,, and the mute have had to resort to this form, of expression. Many of these symbols of whole, words are very picturesque and exact and can, be used internationally; spelling, however,, cannot. (5), Body language transmits ideas or thoughts, by certain actions, either intentionally or, unintentionally. A wink can be a way of flirting, or indicating that the party is only joking. A, nod signifies approval, while shaking the head, indicates a negative reaction. (8), Other forms of non-linguistic language can, be found in Braille (a system of raised dots, read with the fingertips), signal flags, Morse, code, and smoke signals. Road maps and, picture signs also guide, warn, and instruct, people. (10), While verbalization is the most common form, of language, other systems and techniques also, express human thoughts and feelings. (12), (a) Which of the following best summarizes this, passage?, (i) When language is barrier, people will find, other forms of communication., (ii) Everybody uses only one form of com, munication., (iii) Non-linguistic language is invaluable to, foreigners., (iv) Although other forms of communication, exist, verbalization is the fastest., (b) The word ‘these’ in sentence 5 refers to, (i) tourists, (ii) the deaf and the mute, (iii) thoughts and feelings, (iv) sign language motions, (c) All of the following statements are true EXCEPT, (i) there are many forms of communication, in existence today, , READING COMPREHENSION, , 249, , (ii) verbalization is the most common form of, com-munication, (iii) the deaf and mute use an oral form of, com-munication, (iv) ideas and thoughts can be transmitted by, body language, (d) Which form other than oral speech would be, most commonly used among blind people?, (i) Picture signs, (iii) Body language, (ii) Braille, (iv) Signal flags, (e) How many different forms of communication, are mentioned here?, (i) 5, (iii) 9, (ii) 5, (iv) 11, (f) The word ‘wink’ in line 7 means most nearly the, same as, (i) close one eye briefly, (ii) close two eyes briefly, (iii) bob the head up and down, (iv) shake the head from side to side, (g) Sign language is said to be very picturesque, and exact and can be used internationally, EXCEPT for, (i) spelling, (iii) whole words, (ii) ideas, (iv) expressions, (h) People need to communicate in order to, (i) create language barriers, (ii) keep from reading with their fingertips, (iii) be picturesque and exact, (iv) express thoughts and feelings, (i) What is the best title for the passage?, (i) The Importance of Sign Language, (ii) The Many Forms of Communication, (iii) Ways of Expressing Feelings, (iv) Picturesque Symbols of Communication, (j) Who would be MOST likely to use code?, (i) A scientist, (iii) An airline pilot, (ii) A spy, (iv) A telegrapher, 11. Read the following case carefully using your critical reading skills where you apply both creative, and critical thinking. Answer the questions that, follow., The problem involved SBB Manufacturing, a large, producer of non-woven materials such as clothing lining, automobile insulation, and hospital, gowns. SBB identified a large market opportunity, in supplying automobile repair shops with a new, material for disposable shop rags—rags for cleaning and wiping oil and grease residue and spills., , https://abdullahsurati.github.io/bscit
Page 255 :
250, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , The disposable rags replaced the re-usable, shop rags supplied by industrial launderers; they, recycled cloth rags by cleaning them and returning them to the shops each week. The cloth rags, were often returned torn and worn, and occasionally they had embedded metal shivs capable of, gouging man and machine., SBB, on the other hand, offered clean, soft, and, strong rags. They had the feel of cloth and could, be laundered, but they were less expensive for, the mechanics. Another benefit was that each, night they threw the SBB rags in the trash, instead, of having to store the used cloth rags, which were, full of oil, grease, and solvents, and created a fire, hazard., Everything was going well for SBB until the, Environmental Protection Agency (EPA) created, a new regulation. Suddenly, oil or grease soaked, rags were considered hazardous materials, and, companies were limited to the amount of hazardous materials they could dispose of each month., The amount of SBB contaminated rags that the, large auto shops used far exceeded the 100 kilos, per month that the EPA was allowing., The auto shops had just five months to comply, with the new EPA regulations, and they informed, SBB that they would go back to cloth rags unless, something could be done about the situation., All of the ideas that SBB thought of either cost, too much money or took too much time. As a result, we were invited by the marketing head to, run a creative session to help SBB out of the mess., Questions, (a) Write a brief (3–5 sentences) description, of the problem., (b) What have you tried to resolve your, situation, and why do you think that, resolution has failed?, (c) What other obstacles stand in the way of, a successful solution?, (d) Summarize what needs to be changed in, your situation in one sentence beginning, with the words ‘How to….’, 12. Recall the skills that have been discussed in this, chapter under critical reading. Read the following, passage and using your creative and critical thinking choose the best option for each of the questions that follow:, Passage, , Although the schooling of fish is a familiar form, of animal social behaviour, how the school is, formed and maintained is only beginning to be, understood in detail. It had been thought that, each fish maintains its position chiefly by means, of vision. Our work has shown that, as each fish, maintains its position, the lateral line, an organ, sensitive to transitory changes in water displacement, is as important as vision. In each species a, fish has a ‘preferred’ distance and angle from its, nearest neighbour. The ideal separation and bearing, however, are not maintained rigidly. The result is a probabilistic arrangement that appears, like a random aggregation. The tendency of the, fish to remain at the preferred distance and angle,, however, serves to maintain the structure. Each, fish, having established its position, uses its eyes, and its lateral lines simultaneously to measure the, speed of all the other fish in the school. It then adjusts its own speed to match a weighted average, that emphasizes the contribution of nearby fish., (a) According to the passage, the structure of a, fish school is dependent upon which of the, following?, (i) rigidly formed random aggregations, (ii) the tendency of each fish to retain at a, preferred distance from neighboring fish, (iii) measurements of a weighted average by, individual fish, , • II only, • I and III only, , • III only, • II and III only, • I and II only, (b) Which of the following best describes the, author’s attitude toward the theory that the, structure of fish schools is maintained primarily, through vision?, (i) heated opposition, (ii) careful neutrality, (iii) considered dissatisfaction, (iv) cautious approval, (v) unqualified enthusiasm, (c) The passage suggests that, after establishing, its position in the school formation, an, individual fish will subsequently, (i) maintain its preferred position primarily, by visual and auditory means, (ii) rigorously avoid changes that would, interfere with the overall structure of the, school, , https://abdullahsurati.github.io/bscit
Page 256 :
https://abdullahsurati.github.io/bscit, , (iii) make continuous sensory readjustments, to its position within the school, (iv) make unexpected shifts in position only if, threatened by external danger, (v) surrender its ability to make quick,, instinctive judgments, (d) Generate at least five possible solutions to the, problem posed in the following case, analyse, each of them in the light of their positive and, negative factors and present your analysis in, about 300 words:, A group of eight students from Erudite, University plan to go on a motorbike expedition, to the nearby hill station Mountpeak on a, three-day break. On the way to the hill station,, they have to go through a village hamlet., One of the two vehicles which were cruising, ahead of the other two runs over a village kid, and flees from the spot. Meanwhile, elders in, the village come to know about the incident, and decide to search out the culprits. For the, students, this is the only route to get back to, their home town. The group has four girls, whose safety had to be taken care of. If you are, the members of this group, what would you, do?, (e) Supply the missing words from the choices, provided. __________ (1) people breathe,, pollutants in the air __________ (2) in the, lungs or absorbed into the body. And polluted, air can harm animals and plants __________(3), , READING COMPREHENSION, , 251, , people. For this reason, our air supply should, be __________ (4) watched and managed to, assure __________ (5) good quality., (i) When, until, during, if, just as, (ii) Have deposited, are depositing, had to, be deposited, will have deposited, may be, deposited, (iii) As well as, in addition, even if, in spite of,, supposing, (iv) Alternately, previously, hastily, closely,, furtively, (v) Them, its, his, theirs, it, (f) Supply the missing word from the choices, provided., Petroleum, or crude oil is one of the world’s, __________ (1) natural resources. Plastics,, synthetic fibres, and __________(2) chemicals, are produced from petroleum. It is also used to, make lubricants and waxes. __________ (3), its, most important use is as a fuel for heating, for, __________ (4) electricity, and __________ (5), for powering vehicles., (i) As important, most important, so import, antly, less importantly, too important, (ii) Much, a lot, plenty, many, less, (iii) Therefore, however, moreover, hence,, rather, (iv) Generated, to generate, being generated,, generate, generating, (v) Decisively, exclusively, especially, favour, ably, notably, , https://abdullahsurati.github.io/bscit
Page 257 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 11, , Elements of Effective Writing, , OBJECTIVES, , INTRODUCTION, , You should read this chapter, to know, , • how to use the right words, in the right context, , • the ways to achieve clarity, and economy in writing, , • the various sentence, patterns, , • the salient points of, , sentence construction, , • how to write effectively for, the web, , Effective writing is an essential skill for any profession, be it technical, or business. The purpose of writing any professional document is to, communicate specific ideas, and everything about the document, should contribute to this goal. Writing is a skill that can be learnt and, practised, but to improve our writing skills, we need to be aware of the, elements of effective writing. Choosing the right words and phrases,, constructing grammatically as well as logically correct sentences, and, well-developed and coherent paragraphs—all would contribute to, enhancing the quality of writing. In this chapter, we will look into the, elements that contribute to the effectiveness of writing., , RIGHT WORDS AND PHRASES, Using the right words in the right context is one of the essential, elements of effective writing. The following guidelines will help achieve, clarity and economy in writing:, • Prefer simple, familiar words to obscure, unfamiliar words., • Prefer concrete and specific words to abstract and general words., • Use acronyms carefully., • Avoid clichés., • Avoid excessive use of jargon., • Avoid foreign words and phrases., • Avoid redundancy and circumlocution., • Avoid discriminatory writing., , In the following paragraphs, we will delve deeper into these, guidelines, explaining their effectiveness through examples., , Use Familiar Words, An important element in the use of words is the selection of familiar, words—words that are commonly used in daily language. To do this,, one must rely on one’s judgement to decide which words are more, https://abdullahsurati.github.io/bscit
Page 258 :
https://abdullahsurati.github.io/bscit, , ELEMENTS OF EFFECTIVE WRITING, , 253, , familiar. A rule of thumb is to avoid stiff and difficult words as far as possible. For example, use, the word destroy instead of using the word annihilate, use verify instead of using corroborate, and, use outdated instead of antiquated., A sentence such as The conclusion ascertained from a perusal of pertinent, A rule of thumb is to avoid, data is that a lucrative market exists for the product would be more easily, stiff and difficult words as, understood by writing it thus: The data studied shows that the product has, far as possible., good demand. Many writers fall into the trap of using high-sounding,, pompous words in an attempt to make the work more impressive. On, the contrary, such writing confuses the readers. There is no room for such, writing, particularly in business and technical communication. The rapid, The writer must keep the, target readers in mind, pace of work life today demands that writing be informal in tone, brief,, and cater to the lowest, precise, and easy to grasp., common denominator of, There is no formula for the appropriate selection of words. The writer, this group., must keep the target readers in mind and cater to the lowest common, denominator of this group. The key is to use words suited to the, intelligence level of the readers. The use of plain and familiar words, in, ‘A good style should show, contrast to pompous and unfamiliar ones, helps to convey the message in, no sign of effort. What is, a better and more effective manner. Style does not consist in displaying, written should seem to be, a happy accident.’, the width of our vocabulary, but in how successfully we communicate the, –Somerset Maugham, meaning to the reader. In general, simple writing is the key to effective, communication., The following examples show how sentences can be simplified using familiar expressions., Example 1, , Original: Antiquated machinery was utilized for experimentation., Revised:, , Old machinery was used for the test., , Do Not Insult Your Audience, Whereas using simple language and short, sentences is the best way to communicate to all, your readers, you could run the risk of irritating, some of your audience who might feel you are, ‘talking down to them’. You will always have to finetune your judgement of what your audience needs, and understands., , You can do this by thinking about how well they, know the subject and choosing words, especially, technical terms, carefully. If you have to use, unfamiliar words, try and build in an explanation of, their meaning. Never ever patronize your audience., , Example 2, , Original: Company operations for the preceding accounting period terminated with substantial deficit., Revised:, , The company lost much money last year., , Use Concrete and Specific Words, Concrete words stand for things that exist in the real world such as chair, desk, automobile,, flowers, the Taj Mahal, and so on. Abstract words, on the other hand, cover broad meanings—, concepts, ideas, and feelings. Concrete and specific words are always preferable to abstract, words. Concrete words permit a limited interpretation and convey a more definite meaning., https://abdullahsurati.github.io/bscit
Page 259 :
254, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , They tend to be forceful, direct, and to the point, while abstract words tend to be general and, vague, and digress from the point., Good business communication is marked by words that have clear meanings. Instead of, saying ‘The company suffered a tremendous loss in the second quarter of last year’, it would, make more sense to directly say ‘The company suffered a 70 per cent loss in profits in the second, quarter of last year’. Quantifying the loss in the above example makes the information more, useful and creates a better impact. Otherwise, it hardly conveys much meaning., It is essential to convey the message in clear terms; ambiguity results in reduced or no, communication. Give special emphasis to sentence structure and construction in order to avoid, ambiguity. For example, consider the sentence, ‘If the child does not like spinach, try boiling, it with milk’. Here, the word ‘it’ does not convey in clear terms whether the writer is referring, to the spinach or the child. As another example, consider this obscure instruction written on, a bottle top: ‘Pierce with pin, then push off ’. Here too, the ambiguity inherent in the sentence, mars the communication. Hence, it is essential to be clear and precise in the choice of words., Sometimes a sentence is correct in grammatical construction but can be interpreted in a, number of ways. This is called structural ambiguity. For example, ‘Lying at the bottom of the, pool, I saw a five rupee note.’ Similarly, ambiguity can result from the choice of words—the word, selected may have multiple meanings. This is called lexical ambiguity. For example, ‘The giant, plant collapsed damaging many buildings’. Such words should be avoided in technical writing., If someone says, ‘I was looking at the figures keenly,’ the sentence is ambiguous. The words, used should be very specific in their meaning in order to avoid alternative interpretations. Some, commonly used ambiguous words and phrases a writer should avoid are bimonthly, quite a few,, tenement, quite a bit, table a proposal, slim chance, fairly good., Table 11.1 shows some examples of how abstract words and phrases can be substituted to, sound specific and clear., , Use Acronyms and Abbreviations Sparingly, An acronym is a word formed by combining the first letters of the words that make up the name, of something. For example, WHO is the acronym for World Health Organization. We are all, familiar with the common acronyms FBI (Federal Bureau of Investigation), POTA (Prevention, of Terrorism Act), IAF (Indian Air Force), and IBM (International Business Machines)., While working in a particular field, we learn, TABLE 11.1 Substitution of abstract words and phrases with the related technical terms and acronyms. In due, concrete ones, course, we use these terms and acronyms freely, in communicating with people in the same area, Abstract, Concrete, of work. While acronyms help achieve brevity, An industrial worker, A welder, and are necessary in technical documents,, excessive dependence on them leads to a loss, Furniture, An arm chair, of clarity. For example, one can talk to a friend, Apparel, A shirt, in the field of electronics about re-routing, Good attendance record, 100% attendance record, OAM messages using UDP/IP in a CDPD, The leading company, First among 3928 companies, radio. However, for someone who is pursuing a, The majority, 73%, different field of study, these acronyms will be, In the near future, By Thursday noon, unintelligible. Therefore, do not use acronyms, Substantial amount, Rs 1,98,00,000, relating to technical fields when communicating, with individuals unfamiliar with the subject., https://abdullahsurati.github.io/bscit
Page 260 :
https://abdullahsurati.github.io/bscit, , ELEMENTS OF EFFECTIVE WRITING, , 255, , Nevertheless, many acronyms are familiar to the layperson and can be freely used. For, example, acronyms such as RADAR (radio angular detecting and ranging), NASA (National, Aeronautics Space Agency), IIT (Indian Institute of Technology), AIDS (Acquired Immune, Deficiency Syndrome) are commonly used and may not be difficult to decipher., Whether writing a technical document or sending an informal electronic mail, remember, the following points:, • Introduce acronyms the first time you use them by defining them in full, parenthetically., • Restrict the number of acronyms in individual sentences., • When addressing non-expert readers, try to avoid using more than one acronym in a, , sentence., , • Use the full term for an acronym when beginning a new section or when the term has, , not been used for several pages in the technical document., , • When several potentially confusing acronyms are being used, they can be defined in a, , separate glossary (an alphabetized list of terms, followed by their definitions)., , Given below are a few samples of acronyms that may cause ambiguity in a technical document, or an email:, CIA, , Cash in Advance, , CPA, , Certified Public Accountant, , FICA, , Federal Insurance Contributions Act, , CIM, , Computer Integrated Manufacturing, , IRA Individual Retirement Account/Irish Republican Army/Instructionally Related Activities, , Acronyms are extensively used in email and sms communication. It is acceptable as part of, informal communication, but should be strictly avoided in official mails. Some such acronyms, are listed in Table 11.2., TABLE 11.2 Acronyms in email, Abbreviations on the other hand are short forms, Acronym, Definition, of words, such as ‘St’ for ‘Saint’, ‘av.’ for ‘average’, etc., The rules for using abbreviations are also similar, Atw, At the weekend, to those for using acronyms. Some of the specific, Brb, Be right back, usages to avoid are as follows:, Btw, By the way, Cm, Cu, cul, dur?, f2f, Gal, gmtl, Gr8, idk, LOL, Ttyl, w4f, Wfh/wah, , Call me, See you, See you later, Do you remember?, Face to face, Get a life, Great minds think alike, Great, I don’t know, Laugh out loud, Talk to you later, Waiting for you, Working from home/working, at home, , • Do not use phonic abbreviations like ‘u’ (for you), , and ‘tho’ (for though) in formal or semi-formal, writing. It creates the impression that the writer is, not serious in his/her work., • Abbreviations for English units of measurement, use periods (doz., oz., ft., in., pt., yd.,) but, abbreviations for metric units of measurement do, not (g, m, cm, km, ha, MB.), • Though this rule varies as a matter of style,, abbreviations that include the last letter of the, word being shortened should not take a period., For example, Dr (doctor), Mr (mister), but Prof., (professor), col. (column), • Do not abbreviate words at the beginning of, sentences., , https://abdullahsurati.github.io/bscit
Page 261 :
256, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Do not abbreviate proper nouns., , Appendix B in the CD contains a list of commonly used acronyms and abbreviations., , Avoid Clichés, Clichés are overused words and phrases that have lost their appeal. Nobody likes to hear stale,, once-fashionable phrases that add little or no meaning to what we say. Some well-known, clichés include food for thought, teeming millions, last but not the least, fishing in troubled waters,, and to burn the midnight oil. An indiscriminate use of clichés makes technical communication, unimpressive and stale. However, there may be instances where a cliché conveys the idea so, effectively that it becomes extremely difficult to improve upon it or think of a substitute. Hence,, it is completely the writer’s judgement on how often to use clichés and when to avoid them., Example 1, , Original: The report discusses threadbare the problem of air pollution in India., Revised:, , The report discusses the problem of air pollution in India in detail., , Example 2, , Original: The engineers left no stones unturned to construct the bridge in time., Revised: The engineers worked very hard to construct the bridge in time., , Jargon is defined as, words or expressions that, are used by a particular, profession or group of, people, and are difficult for, others (outside this group), to understand., , Avoid Excessive Use of Jargons, , Jargon is defined as words or expressions that are used by a particular, profession or group of people, and are difficult for others (outside this group), to understand. Every profe-ssion has its specific jargon., Doctors communicate with each other in medical terms that are seldom, understood by the layperson. Similarly, software professionals resort to, the use of computer-related jargon. The use of jargon is acceptable as long, as the communication takes place among individuals belonging to the same field or profession., However, to sustain the interest of a large readership, it is necessary to minimize or avoid the use, of jargon, since the reader may not be a specialist in the subject. The content has to be simplified, to the extent possible when presenting it to, a non-technical audience, and this requires, the use of non-technical and easy words and, Gale and Moore, descriptions., Attorneys of Law, Jargon is often used due to the false, assumption that complex ideas cannot be, expressed without the use of highly technical, language. However, in effect, jargon only, widens the semantic gap between the, professional and the layperson. One of the, hallmarks of effective communication is its, ability to reach a population larger than what, it is intended for. If such is the goal, excessive, use of jargon has little role to play. Table 11.3, ‘The contract is legally sound now; all we need to do is flavour it with, shows some examples of how technical jargon, some jargon.’, https://abdullahsurati.github.io/bscit
Page 262 :
https://abdullahsurati.github.io/bscit, , TABLE 11.3 Avoiding technical jargon, , Technical jargon, , Familiar expressions, , Accrued interest, Annual premium, Assessed valuation, Charge to your principal, Conveying title, Maturity date, Per diem, Mach-2, Catalysis, , Unpaid insurance, Annual payment, Value of property for tax, Increase balance of your loan, Signing and recording a deed, Final payment date, Daily, Twice the speed of sound, Accelerated decomposition or, re-composition of a substance, , TABLE 11.4 Some uncommon foreign words, , Foreign words, raison d’être, infra dig, teté-a-teté, status-quo-ante, vide supra, alma mater, bona fide, quondam, Éclat, sub rosa, , Meaning, The most important reason to, exist, Below dignity, Personal interview/person talk, As it was before, See above, Fostering mother university, In good faith, Former, Renown, Secretly, , ELEMENTS OF EFFECTIVE WRITING, , 257, , can be replaced by their corresponding simpler, representations., , Avoid Foreign Words and Phrases, Like jargon, some writers indulge in the use of, foreign words and phrases. It makes little sense, to use words such as vide supra or raison d’être in, place of better understood English equivalents, such as ‘see above’ and ‘the justification, for’, respectively. Some foreign words are, unavoidable and are also universally understood, and accepted; for example, etc. (et cetera), i.e. (id, est), e.g. (exempli gratia), a.m. (ante meridiem),, p.m. (post meridiem), and so on. It is not wrong, therefore to use such words or phrases as long, as the reader is able to grasp the message being, conveyed. Table 11.4 lists some foreign words, with their meanings., , Avoid Redundancy and Circumlocution, We need to avoid the use of unnecessary words or, resort to needless repetition of an idea. This makes, the writing redundant. Redundancy is the part, of a message that can be eliminated without loss, of much information. Re-emphasizing the same, point through the usage of extra words does not, confer any extra worth to the idea., Once unnecessary words are pruned, the idea, stands out clearly and effectively. Some examples, of redundancy are—the superfluous words are, italicized—basic fundamentals, return back,, , Rules that can Help while Using Jargons, • When a word or a phrase from the general, vocabulary expresses a thought as well and as, precisely as a specialized term, always use the, general term., • Even if the specialized term is more precise, and economical than the general term, do not, , use it unless you are sure that the reader would, understand it., • When you have to use a specialized term, repeatedly, define it clearly at its first appearance., , adequately enough, resume again, the month of May, few in number,, detailed perusal, true fact, new innovations, future prospects, and so on., Superfluity in writing is also brought about by beating around the bush, or writing in a circumlocutory manner. In these cases, the entire sentence, needs to be rewritten in order to make it crisp and precise., , Redundancy is like killing a, fly twice over., , https://abdullahsurati.github.io/bscit
Page 263 :
258, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Examples, , Original: Unemployment decline, which has continued over the past four months, indicates that the recession, has bottomed and the upturn in the economy is a fact., Revised: The strong reversal of unemployment trends indicates an improvement in the economy., Original: It is not believed that the proposed design will meet all the required specifications based on the, previous test experiences obtained in the laboratory., Revised: Lab tests indicate that the proposed design will not meet all requirements., , Avoid Discriminatory Writing, In today’s all-inclusive society, it is wrong on a writer’s part to alienate a section of the masses, through the usage of politically incorrect words. Such writing is offensive and does not speak, well of the author’s open-mindedness. All too prevalent are gender-biased words—words that, differentiate people based on their gender. Although this form of discrimination can be against, both genders, most instances involve discrimination against women, the reason being that a, large number of words suggest male superiority and chauvinism. The repeated use of masculine, pronouns—he, his, and him—creates a sexist image. A sentence such as ‘A student in BITS, does his homework well before coming to class.’ shows gender bias, considering the fact that, BITS is a co-educational institute., The use of masculine pronouns can be eliminated in three ways:, 1. Rewording the sentence: ‘A student in BITS does the assigned homework well before, coming to class.’, 2. By making a dual reference: ‘A student in BITS does his or her home work …’, 3. By making the reference plural ‘Students in BITS do their homework …’, , Since language developed in a male-dominated society, it is common to find words such, as ‘man-made’, ‘manpower’, ‘chairman’, ‘firemen’, ‘manhole’, ‘batsman’, ‘layman’, and so on., These can be made non-discriminatory by using non-sexist nouns such as ‘of human origin’,, ‘personnel/workers’, ‘chairperson’, ‘firefighter’, ‘layperson’, and so on., Words that stereotype by race, nationality, or sexual orientation must also be avoided., Such statements can severely damage the writer’s image and lead to major controversies and, embarrassments. Also, it is no longer acceptable to use words that stereotype by age or typecast, people with disabilities. Terms such as ‘deaf and dumb’, ‘mentally retarded’, and ‘handicapped’, sound highly insensitive. Gentler and more humane words such as ‘physically, challenged’ or ‘mentally challenged’ convey the same meaning but with a, ‘The writer does the most,, greater degree of sensitivity., who gives the reader the, To summarize, the elements of style that enhance effective writing, most information and, include, a choice of simple words and phrases, precise expressions, and, takes from him the least, making, a, conscientious effort to express oneself plainly. Frills and verbal, time.’, tricks, unfamiliar words, inflated or worn-out phrases, and needless, –Charles C. Cotton, repetition should be avoided., , SENTENCES, Expressing ideas in skilfully written sentences contributes considerably to the success of writing, as a whole. The ability to construct effective sentences adds value to technical documents such as, emails, letters, memos, reports, proposals, etc. On the other hand, if sentences are ineffective—, choppy, loose, ambiguous, and awkward—they fail to create the impact one intends to make, https://abdullahsurati.github.io/bscit
Page 264 :
https://abdullahsurati.github.io/bscit, , ELEMENTS OF EFFECTIVE WRITING, , 259, , on the readers. Hence, it is necessary to learn to write effective sentences in order to construct, technical or formal messages., A sentence is a group of words that expresses a single, complete thought. While the basic units, of a sentence are subject (main part of the sentence—noun/pronoun) and predicate (remaining, parts of the sentence—verb, object, compliment, and other elements), the, larger units that make up a sentence are main (or coordinate) clauses,, A sentence is a group of, subordinate clauses, and phrases. Chapter 17 gives details on these, words that expresses a, single, complete thought., individual elements. Look at the following examples to understand the, basic parts of a sentence:, Example 1, , Despite winning the lottery, my cousin seems to be unhappy., My cousin: subject (noun), Despite winning the lottery, seems to be unhappy: predicate, Despite winning the lottery; unhappy, subject compliment (compliments the cousin/says something more, about the noun), Seems to be: verb, , A main clause, as the name implies, makes the main statement in a sentence, whereas a, subordinate clause is a group of words that has a subject and a verb, but is dependent upon a, main clause. In other words, a subordinate clause cannot stand by itself and make sense, while, a main clause can stand alone and make sense., Example 2, , After completing the filtration process, the students moved on to the next experiment., , A phrase is a group of, words that does not have, a subject and a verb, and, that, like a subordinate, clause, is dependent on a, main clause., , From this example, you may be able to understand that ‘the students, moved on to the next experiment ’ is the main clause and ‘after completing, the filtration process’ represents the subordinate clause., A phrase is a group of words that does not have a subject and a verb, and, that, like a subordinate clause, is dependent on a main clause; for example,, after the game, seeing the danger, behind bars, above the ceiling, and so on., , Sentence Patterns, Based on the way in which the clauses are combined, sentences are classified as simple, complex,, compound, and compound—complex sentences. A simple sentence contains only one clause—, the main clause. The sentence can also have a compound subject as shown in the examples, below:, Gold is an expensive metal., , The teacher along with her students completed the project., , A compound sentence contains two or more main clauses, which are called coordinate, clauses, as illustrated in the following sentences:, The teacher along with her students completed the project and they enjoyed the evening together., Gold is an expensive metal but many people still spend money in buying gold., , A complex sentence contains one main clause and one or more subordinate clauses as shown, below:, Although I wished to participate in the conference, I could not leave my home., https://abdullahsurati.github.io/bscit
Page 265 :
260, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , The reports show that the process used for the purification of water by the National Fertilizers Ltd. who had won, the best researcher award this year, was immaculate., , A compound–complex sentence or mixed sentence is made up of two complex sentences, joined by the coordinating conjunction ‘and’, as shown in the following examples:, , Despite the fact that writing technical documents takes time, Mr. Kamal enjoyed such writing assignments and, I used to appreciate the enthusiasm that he had exhibited in preparing his technical documents., Although roughly the same size as the Earth, Venus is generally much smoother despite being broken in one, place by a mountain peak higher than the Everest, and it is blanketed by an atmosphere of carbon dioxide,, ninety times denser than the Earth’s, which raises its surface heat above the melting point of lead., , From the preceding discussion, we can learn that a complete sentence is one that contains a, statement that will stand by itself, makes sense, and has a subject and a verb., , Salient Points of Sentence Construction, This section provides guidelines and examples to construct sentences with greater clarity and, effectiveness., , Short sentences, Simplicity in writing can be achieved mainly by writing short sentences. Shorter sentences, convey meaning better than longer ones. If too many ideas are stuffed into a sentence through, words, the meaning is lost and the reader is left confused. Therefore, one, should attempt to limit the amount of information in each sentence., ‘Have something to say,, Preferring shorter sentences does not mean that long sentences are to, and say it as clearly as you, be completely avoided. When long sentences are required to convey a, can. That is the only secret, complex message, construct them meticulously so that clarity is achieved., of style.’, While giving a speech, long sentences can be used to good effect by, –Mathew Arnold, using appropriate pauses, intonation, and body language. However, as, non-verbal and paralinguistic features are missing in writing, one should be careful in framing, long sentences. The best sentence is that which a reader can understand in the first reading., As we have learnt in the preceding section, there are various types of sentences on the basis, of their structure: simple, compound, complex, and compound –complex. All these types are, normally required while preparing a technical document. However, one should remember to, use a judicious mix of long and short sentences, as they not only arouse interest in the reader, but also break the monotony of reading the same type of sentences. Sometimes, the completion, of a thought requires a compound or complex sentence. In such situations some short sentences, can be inserted either before or after these long sentences to provide some relief to the readers., Long sentences are usually harder to understand than the shorter ones, as readers can absorb, only a few words per glance. Hence, they may skip some words and not grasp the full meaning., Nevertheless, long sentences are well-suited for certain purposes such as summarizing,, combining ideas, and listing. It is appropriate to use medium-length sentences (about twenty, words) for linking ideas. Although there is no rule about the length of a sentence, most effective, formal/business writing has an average length of twenty words per sentence or fewer. The, following sentence illustrates how a long sentence can be ineffective in communication:, The members of the management of Bharat Textiles Ltd are unable to see their way through the crisis that has, engulfed the company, though they are keeping it as a well-guarded secret, not even revealing what ails the, company, as they think this necessary for the protection of the image of the company., https://abdullahsurati.github.io/bscit
Page 266 :
https://abdullahsurati.github.io/bscit, , ELEMENTS OF EFFECTIVE WRITING, , 261, , TABLE 11.5 Long and short sentences, , Long and breathless sentences, , Short and clear sentences, , • We might further mention that we would be glad to • We would gladly provide any of these whistles for trial., furnish any of these whistles on a trial basis to the extent, In addition, we would replace the smaller size whistles, that if the smaller size is not adequate enough, it could be, with the larger ones, if you feel that they may help you, returned in lieu of the purchase of a large size depending, hear your signals more clearly at a specific distance., upon actual operation and suitability of requirement for, signal distance and audibility., • We can see from the above list that though the average • The above list shows that this restaurant has the, number of customers per day is small, the turnover is, maximum turnover though the average number of, maximum because at other restaurants the main items of, customers per day is small. This is because besides tea,, sale are tea, coffee, and snacks, whereas at this restaurant, coffee, and snacks, it sells meals also., meals are also available., • Due to the fact that the production of reports involves • The production of reports involves a large cost to our, considerable cost to our organization, it can easily be, organization. If we shorten the reports keeping in, seen that the reduction of the time spent in writing and, mind the complexity, adequate coverage relevant to, reading them, a shortening of the reports themselves,, specification and contents, we can reduce the time, would represent an appreciable gain in reducing our, spent on reading and writing them. By doing so, we, general operating expenses, although the matter of, can reduce the operating expenses., the length of the report should naturally be considered, in relation to the complexity of the material and its, adequate coverage keeping in mind the requirements of, the specific situation., , It may not be possible to immediately grasp the main idea from this sentence when we read, it once. The miscommunication in the sentence is not due to the words used but because of the, length of the sentence, the number of words, and their relationship. A complex sentence can, be simplified by breaking very long sentences into two simple sentences and/or using words, economically. Try revising the complex sentence given above after going through this chapter., , Break the sentence, When a sentence is loaded with a lot of information, it becomes very difficult to understand the, meaning. It is difficult to break a sentence only when the ideas are very closely knit. Otherwise a, sentence can be split into two or three shorter sentences to bring in clarity. Table 11.5 illustrates, the advantage of short sentences over long sentences., Long and circuitous sentences are difficult to understand while the shorter ones convey a, message more easily. Shorter sentences in fact are more precise in expression., However, using too many short sentences also makes the writing appear jerky and irritating. It, will also give an impression of elementary writing (such as writing for children). It is, therefore,, a writer’s job to bring in the right mix of simple and complex sentences., Look at the following sentences:, Original: The tinder must be some soft, inflammable material. This may be dry grass, leaves, or wood shavings., Revised: The tinder must be some soft, inflammable material such as dry grass, leaves, or wood shavings., Original: The experiment was over. I completed the report. I shut down the power supply. I submitted the report, to the instructor. I left the laboratory., https://abdullahsurati.github.io/bscit
Page 267 :
262, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Revised: I completed the report as soon as the experiment was over. After shutting down the power supply, I, submitted the report to my instructor., Original: The logs are fastened to a chain running up an incline. When they reach the floor of the mill they are, rolled onto the carriage. The carriage is about 40 feet long by 15 feet wide. It moves the logs toward the saw, after each is cut by means of an automatic feeding device., Revised: The logs are fastened to a chain and hauled up an incline to the floor of the mill, where they are rolled, onto the carriage. The latter, which is about 40 feet long by 15 feet wide, is provided with an automatic feeding, device by means of which the logs are moved towards the saw after each cut., , The original versions sound choppy and disjointed whereas in the longer sentences, the, sequence of thoughts is smoothly linked., , Economy with words, A sentence can be shortened by being economical with words. One idea can be expressed in a, number of ways; one way can be shorter than the other. Usually, a briefly worded sentence saves, the time of the reader apart from being clearer and more interesting., The following substitutions will help one achieve economy with words., Avoid cluttering phrases Sentences often become long because of cluttering phrases. One, can replace these phrases with shorter wording, without loss of meaning. Let us look at these, examples:, In the event of procrastination and dilatory action, the operations will be shunned., , The phrase ‘in the event of’ is uneconomical and can be substituted by ‘if ’ without loss of, meaning. Similarly, ‘procrastination’ and ‘dilatory action’ can be replaced by ‘delay in action’., If there is delay in action, the operations will be cancelled., , Similarly, the following sentence begins with an unnecessary phrase that adds to the length., I take this opportunity to tell you that you are an excellent leader., , The better substitute will be, You are an excellent leader., , Avoid, pleonasm, or, redundant, phrases, To, write, with, simplicity, and, What do I do for, clarity, avoid using excess words that, effective, communication? do not contribute any meaning to the, sentence. Sometimes the sentence will, have to be reconstructed after eliminating, the extra phrases, while at other times, it, would suffice to delete the extra words., Look at some of the examples of pleonasm, taken from technical writing:, It has been glaringly noticed from the records of the, accounts that the company faced great loss in this, fiscal year., , The initial words in the sentence, do not add anything substantial to the, meaning of the sentence. Therefore they, , https://abdullahsurati.github.io/bscit
Page 268 :
https://abdullahsurati.github.io/bscit, , TABLE 11.6 Avoiding cluttering phrases, , Cluttering phrases, , Better substitute, , Owing to the fact, Under the circumstances in which, For the reason that, In the light of fact, On the occasion of, Under circumstances in which, It is necessary that, Has the opportunity to, There is a chance that, It is important that, It is necessary that, In the meantime, In very few cases, With a view to, , Because, When, Since, Because, When, When, Should, Can, May, Must, Should, Meanwhile, Seldom, To, , ELEMENTS OF EFFECTIVE WRITING, , 263, , can be dispensed with, and the sentence can be, reconstructed thus:, , The records of the accounts indicate that the company faced, great loss in this fiscal year., , Here is another example:, , The company is not prepared to expand at this point of time., , The phrase ‘at this point of time’ can be replaced, by one word, ‘now’, and the sentence can be, rewritten thus:, The company is not prepared to expand now., , Some commonly used cluttering phrases that, should be avoided are mentioned in Table 11.6. The, sentences shown in Table 11.7 prove the point, further., , TABLE 11.7 Avoiding pleonasm, , Sentences with pleonasm, , Better option, , • I am of the opinion that the company managers should • The company managers should be admonished for, be admonished for their misconduct., their misconduct., • In the light of the fact that Mr Bansal has worked with • Since Mr Bansal has worked with effort to build this, effort to build this website, we must give him the contract., website, we should give him the contract., • It is essential that there be no construction of houses in the • There should be no construction of new houses in the, area designated as the sanctuary for wildlife., area designated as the wildlife sanctuary., • The antique dealer who is on Mukherjee Road has a pair • The antique dealer on Mukherjee Road has a pair of, of silver candlesticks that were designed by Punit., silver candlesticks designed by Punit., • Many of the riders were boys with skinny frames and bold • Many of the riders were skinny, bold-spirited boys., spirits., • In the period between October and December, the • Between October and December, the business did, business did well., well., , Avoid circuitous expressions While it is possible to write a sentence in a number of ways,, some ways are more direct than others. Let us observe this sentence:, If there are any points on which you require explanation or further details, we shall be glad to furnish such, additional details as may be required by telephone., , A better substitute is, , If you have any questions, please contact us over telephone., , The examples given in Table 11.8 will illustrate the point., https://abdullahsurati.github.io/bscit
Page 269 :
264, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , TABLE 11.8 Avoiding roundabout sentences, , Roundabout sentences, , Direct sentences, , • It is important that you shall read the notes, advice, • Please read the notes given overleaf before you fill the, and information detailed opposite, then complete the, form. Then send it to us by tomorrow in the envelope, form overleaf prior to this and immediately return to the, provided., council by way of the envelope provided., • The table is intended to assist investors in understanding • This table describes the fees and expenses you may, the costs and expenses that a shareholder in the fund will, have to pay in connection with an investment in our, bear directly or indirectly., fund., • The following summary is intended only to highlight • This summary highlights some information already, certain information contained elsewhere in the, included in the prospectus., prospectus., • Persons other than the primary beneficiary may not • Only the primary beneficiary may receive these, receive these dividends., dividends., , Table 11.9 lists certain phrases that add wordiness to a, sentence, and how such phrases can be substituted by more direct, words to give a crisper, business-like effect., , TABLE 11.9 Using direct words, , Phrases, is aware of, has knowledge of, is taking, are indications, are suggestive, considering the fact, , Substitute, knows, knows, takes, indicate, suggest, consider, , Avoid needless repetition Repetition of a word or idea, unnecessarily lengthens the sentence, without adding to the, meaning. Most of the time, it serves no purpose at all as can be, observed in this sentence:, I was born in summer, the month of July., , meaning. Another example:, , A more direct version, I was born in July, conveys the same, , He remarked that he believes that I am a consummate speaker., , By not repeating the word that, the sentence reads much more crisp:, He remarked that he believes I am a consummate speaker., , Redundant words also add up to the sentence length. For example, expressions such as past, memories, various differences, true facts, future plans, past history, sudden crisis, and free gift, are illogical and cannot be justified. Look at the following sentence:, Before I finalize the schedule, please let me know your future plans., , This can be better written as, , Before I finalize the schedule, please let me know your plans., , You may have heard this expression often:, Please return back my book tomorrow., , The sentence can be rewritten without loss of meaning like this:, Please return my book tomorrow., , Given in Table 11.10 are more examples of redundancies along with the better versions., https://abdullahsurati.github.io/bscit
Page 270 :
https://abdullahsurati.github.io/bscit, , ELEMENTS OF EFFECTIVE WRITING, , 265, , TABLE 11.10 Avoiding redundancy, , Redundancy ridden, , Sans redundancy, , • We will all assemble together for the condolence • We all will assemble for condolence., meeting., • This stick is short., • This stick is limited in length., • My fundamentals of Physics are not clear., • My basic fundamentals of Physics are not clear., , • The speaker invigorated his presentation by, narrating jokes., , • At the present time, I am training two engineers., , • I am training two engineers., , • The speaker invigorated his presentation by, narrating humorous jokes., , Right ordering of words and proper emphasis, In order to convey the exact meaning of what we wish to say, words must be placed in the, right order. A lot of information goes into a sentence, but all of it is not necessarily of equal, importance. We now know that the sentence length affects the emphasis. Short sentences carry, more emphasis than longer ones. It draws attention to its contents, giving a single uninterrupted, message. This is well-illustrated in the following passage:, The community-type hybrid solar cooker was designed bearing in mind not only cost and time as the main, factor, but also a special feature of heat energy being trapped by flat collectors that can be supplemented by, burning coal or other conventional fuels, making it appropriate for traditional cooking in rural areas. The steel, tray, which is fixed inside the box, is painted black and covered with glass sheets, accounting for the quick, heat trap; however, this black paint and insulation apart from preventing the heat from escaping also let the, cumulative heat build up inside the wooden box to accelerate the cooking of food items kept in aluminium, vessels. This project was found to be commercially viable., , Longer sentences that contain many ideas get confusing, as the emphasis gets diluted across, the contents. To highlight varying emphasis, let us take this example:, The report was completed in time. The completion took place in spite of difficulties., , Here equal emphasis is given to both ‘report was completed in time’ and ‘difficulties’. In the, second option, where these two sentences have been combined, the emphasis changes., Although we faced difficulties, the report was completed in time., , Here the second clause has been given greater emphasis. Given in Table 11.11 are some, more examples to show how proper emphasis alters the meaning of the sentences., TABLE 11.11 Use of emphasis, , Less emphatic, , More emphatic, , • Two of our members heard you speak in Delhi and • Two of our members heard you speak in Delhi, praised you highly for your dynamic presentation, and when they returned, praised you highly for, when they returned., your dynamic presentation., • We feel we are missing some patients, and therefore • By using this system, we are missing some, losing revenue, by using this system., patients and therefore losing revenue., • The primary force behind most stress relief and • The medical reports show that the primary, exercise programmes is the executives who are, force behind most stress relief and exercise, prone to stress and heart attacks, as shown by, programmes is the executives who are prone to, medical reports., stress and heart attacks., https://abdullahsurati.github.io/bscit
Page 271 :
266, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , The illustrations of Table 11.11 show how the construction of sentences affects emphasis., All clauses or ideas can be given equal importance, or any of them can be de-emphasized., However, care must be taken to place the key message either at the beginning or at the end of, the sentence, rather than bury it in the middle., , Active versus passive voice, Economy of words is one of the hallmarks of good writing, and using the active, rather than the, passive voice, is one way to achieve economy. Passive constructions often result in vagueness,, and they are longer since they need helping verbs (such as has been). Passive voice can be used, occasionally, especially when we want to avoid the use of personal pronouns; otherwise it is, preferable to use active voice. Passive voice can be used in the following instances:, • When the doer of the action is anonymous or is not very relevant. For example: If, kerosene is exposed to fire, it ignites immediately., • In some standard phrases, for example, someone to be reckoned with or match was abandoned., • If the attention is already on the object of action ‘for example’ Those black stones seem, to augur bad luck—last night they were desecrated by the crowd., • Sometimes to add variety, to help augment a point, or to add some stylistic effect., A few examples are given in Table 11.12. Note from these examples that active voice produces, more forceful and livelier writing. Since the emphasis is on action, it generally saves words., Avoid ambiguous sentences, Ambiguity is a hindrance to clarity, which in turn results in communication going awry. Faulty, construction of sentences gives rise to ambiguity. Ambiguity arises mainly because of misplaced, modifiers in sentences. A modifier is a word/phrase/clause that tells us something more about, TABLE 11.12 Passive and active voice, , Passive, , Active, , • The concentration by the Training Division of its time, • We do not advise the Training Division to concentrate, money, and other resources into a new programme is not, its time, money, and other resources into a new, advisable from our point of view., programme., • Our implementation of this new procedure is required by • The board of directors requires us to implement this, the board of directors., new procedure., • My first visit to your organization will always be • I will always remember my first visit to your, remembered., organization., • In completing the tasks, the planned Rs 70,000 budget • In June and July, we had to exceed the planned, for June and July was exceeded., budget of Rs 70,000 in order to complete the task., • A weekly meeting is recommended as a way to reduce • We recommend a weekly meeting as a way to reduce, problems generated within the Training Division., problems generated within the Training Division., • There are many positive aspects of cheque collection that • This report does not bring out many positive aspects, are not brought out in this report., of cheque collection., • From these findings it is indicated that none of you has • These findings indicate that none of you has yet, yet notified me., notified me., https://abdullahsurati.github.io/bscit
Page 272 :
https://abdullahsurati.github.io/bscit, , A modifier is a word/, phrase/clause that tells us, something more about a, verb, noun, or adjective in, the sentence., , ELEMENTS OF EFFECTIVE WRITING, , 267, , a verb, noun, or adjective in the sentence. The position of a modifier in, a sentence is important. Whether it is a word, a phrase, or a clause, it, should be placed as close as possible to the word it modifies. Given below, are three examples where misplaced modifiers lead to ambiguity. In the, improved version, these modifiers, once placed in the correct position,, make the sentences clear and easy to understand., , Example 1 (a word as a modifier), , Original: The delay in transit nearly drove the manager frantic., Revised: The delay in transit drove the manager nearly frantic., , Example 2 (a phrase as a modifier), , Original: Quick Information Systems has bought new computer chairs for the programmers with more, comfortable seats., Revised: Quick Information Systems has bought new computer chairs with more comfortable seats for the, programmers., , Example 3 (an elliptical clause as a modifier), Original: While on a tour of India, my expensive watch was stolen., Revised: While we were on a tour of India, my expensive watch was stolen., , Table 11.13 shows a few more ambiguous sentences along with their corrected versions., TABLE 11.13 Avoiding ambiguous sentences, , Ambiguous, , Revised, , • He noticed a large stain in the rug that was right in the centre. • He noticed a large stain in the centre of the rug., , • The seniors were told to stop demonstration on the campus. • The seniors on the campus were told to stop, demonstration., • New York’s first commercial, human sperm bank opened on • New York’s first commercial, human sperm bank, Friday with semen samples from eighteen men frozen in a, opened on Friday when semen samples were, stainless steel tank., taken from eighteen men. These samples were, then stored in a stainless steel tank., • You can call your father in Delhi and tell him all about Srimant • For just Rs 50, you can call your father in Delhi and, taking you out to dinner for just Rs 50., tell him about Srimant taking you out to dinner., , WRITING FOR THE WEB, With the phenomenal increase in the use of smartphones, tablets, kindle, etc., online readership, has been witnessing a tremendous growth. Online readership includes various social networks,, wikis, blogs, websites, etc. Though print material is widely used by all of us for academic and, professional purposes, time is not far when online media will take over print media. Hence, it, has become important for us to know not only the various types of online writing but also the, style in which we need to formulate the web content., Writing for the web is different from that for the print media. Think for a few minutes how, we read a newspaper? Do we start reading from the first line of the front page till the last line on, the last page? No. We may read headlines and some important columns on page one and then, directly go to the sports section if we are interested in sports or go the editorial page if we wish, https://abdullahsurati.github.io/bscit
Page 273 :
268, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , to know the newspaper’s views on certain topics of importance. Similarly, many readers who, read on the web also skim through certain sections and quickly complete reading the content., Keeping this behavioural attitude of the readers in mind, print media try to attract and retain, their attention by catchy visuals, colour scheme, and headlines. Likewise, when we write for, the web, we need to understand the various platforms available and follow certain guidelines in, order to grab and sustain the attention of our readers., Social networks are forums that enable people to get connected to each other. Started initially, for sharing more of personal information, these networks are now being widely used for sharing, professional messages as well. Facebook, Twitter, and LinkedIn are three most popular social, networking sites., Wikis are collaborative websites where multiple authors add and edit content. They are also, used by organizations to manage content, and interact with each other and their users., Blogs are web pages created by individuals on a particular topic. Though personal blogs are, online journals that can be created in MySpace or LiveJournal, the professional blogs engage, the readers by writing on topics that are of interest to others. A blog on photography or on, origami, for instance, may be of interest to many readers., Websites are pages on the Internet to inform the readers about a person or an organization, depending on whether they are personal websites or professional/corporate/university websites., Clarity of purpose, audience awareness, planning content, using effective style of writing,, formatting, and proofreading are the concerns of those of us who wish to write for web., , Clarity of Purpose, When we think of creating content for the web, we need to ask ourselves the following questions, so that we are clear with our purpose:, •, •, •, •, •, , What are we achieving by publishing this content?, What information should we include in this?, Does my objective understand the readers’ needs?, Have I read the other web contents on the same topic before I set my objectives?, Have I published the same topic on any other web forum and, if so, how does this, content differ from the earlier one?, • Does my content have a single purpose or multiple purposes? If it has many purposes,, which one is the most important one?, , Audience Awareness, Readers read our web content with specific task in mind. For instance, when we like to know, about a job profile in ‘knowledge management’ area, we surf the web specifically for that content., Similarly, readers go to the web with a specific demand. Hence, it is important to understand, their needs. In fact, being aware of the recent trends in job market, industries, sectors such as, academia and industry, etc. would enable us to understand the readers’ requirements. To get, increased readership for our web content, it is not only important to write what we know about,, but also what readers want., , Planning Content, Keeping in mind our purpose, audience demands, and the timeline, we need to plan our, content. Also we should think of sustaining the interest of our readers for a long term. In other, words, the content shouldhttps://abdullahsurati.github.io/bscit, involve not only the present status but also its future implications.
Page 274 :
https://abdullahsurati.github.io/bscit, , ELEMENTS OF EFFECTIVE WRITING, , 269, , For example, if the content presents the topic ‘innovative pedagogies for university education’,, it should include the latest pedagogical pursuits as well as the future pedagogies that would, depend primarily on technological aids., Extensive research is important during the planning phase, and we should try to identify the, sources from which we can collect information for developing our content. We can refer to books,, journals, magazines, online resources, etc., so as to keep ourselves updated about the content., , Effective Style of Writing, Though the fundamentals of effective writing may be same for print and online writing, the latter, differs in certain aspects. For example, we should use first person and second person, rather than, using third person. We should get to the important point right away without spending too many, words on the introduction because if the readers don’t find the required information soon, they, would go for some other site. We should be friendly in our tone and speak directly using active voice., , Formatting, Our web content should be easily readable and scannable, and in order to achieve these, we can, follow the following tips:, , • Use appropriate font type, size, and colour; use bold or italics type to catch the important, points of the content., • Use catchy headings and subheadings that reflect the content under each., • Provide easy navigations for any links or other sources, etc. It is better to connect the, links to the appropriate words in the content rather than using the words ‘Click here’., • Bullet lists may be helpful in grabbing the attention., • Use videos, photos, and other multimedia aids for enriching the text., , Proofreading, Our web content should be free from typos, incorrect spelling, and grammatical errors. Such, lapses would put the readers off and keep them away from using any of our web writing. Just as, we proofread our print content, we should proofread carefully the web content too. Carefully, edited, revised, and proofread content would have better chances of getting more readership., The following links would provide an idea of the various types of web writing:, •, •, •, •, , https://www.linkedin.com/in/sumedh08, http://educationalwikis.wikispaces.com/Examples+of+educational+wikis, http://www.baghaescup.blogspot.in/, https://twitter.com/example, , SUMMARY, Effective writing is essential in every profession. This, can be achieved by maintaining clarity and brevity, in writing. Words, being the smallest unit in writing,, play a crucial role in effective communication of a, message. Clarity can be achieved by using simple and, familiar terms, concrete and specific words, by using, , acronyms carefully, and by avoiding clichés, jargons,, and foreign words. Effective and good writing has, to be able to reach out to a large audience. This, requires the writer to maintain an impersonal and, indiscriminatory tone, while being genuine., , https://abdullahsurati.github.io/bscit
Page 275 :
270, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Although it is essential to retain the correct order, of words to achieve the desired emphasis as well as, grammatical accuracy, variety can be added to the, writing by altering the sentence types effectively., Other key factors to be remembered by a writer, are a correct mix of active and passive voices and, avoiding ambiguity., , Online media is gaining a lot of attention these, days. Hence, we need to keep certain things in mind, while writing for the web, such as clarity of purpose,, audience, awareness, planning, etc., , EXERCISES, 1. Substitute the unfamiliar words in the sentences, given below with familiar words., (a) If liquidation becomes mandatory, we shall, dispose off the mammoth buildings first., (b) The boffins’ propensity to assimilate new, instruments is insatiable., (c) Mr Bose’s idiosyncrasies supply adequate, justification to oust him out of his office., (d) The exiguous diet intake is reflected by the, gaunt figure of the patient., (e) The unanimity of current forecast is not, inconvertible evidence of an impending, business., 2. Identify and replace the general words with more, concrete and specific words., (a) His GRE score was not high., (b) The institute will buy some new equipment, soon., (c) This room is large enough for the crowd., (d) Kota has many engineering and medical, colleges., (e) Our company has made a significant profit this, year., (f) I will visit your organization shortly., (g) He is interested in an occupation in the line of, engineering., (h) Let us first find out what his angle is., (i) From the point of view of economy of, operation, the small car is superior to a big car., (j) The institution needs to spend a considerable, amount of money to set up this new laboratory., 3. Substitute clichés with simple English words., (a) Last but not the least, I thank the typist for, doing a commendable job., (b) By and large, the company is making exorbitant, profit., , (c) It goes without saying that I had a wonderful, experience by being the member of your, coterie., (d) If you give me this opportunity to serve your, organization, I promise I will leave no stone, unturned., (e) It was a blessing in disguise to spend the, holidays in this arid land., 4. Dispense with the jargon to make the following, sentences more effective., (a) The biota showed hundred percent mortality, response., (b) The oedema in the leg indicates that the leg, might be amputated., (c) The shareholders without any procrastination, should sell the junk bond., (d) We are designing a plane to fly at speed above, Mach 2., (e) The research division has taken up a detailed, study of the meteorological effects on, microwave propagation., 5. Correct the malapropism in the following sentences., (a) Geometry is a science which deals with the, earth’s crust, its strata, and their relations and, changes., (b) What a supercilious knowledge of ethics you, possess!, (c) An epigram is what we say about a man after, his death., (d) Herrings swim in the sea in shawls., (e) She instructed them in geometry so that they, might know something of the commercial, countries., (f) Don’t attempt to extirpate yourself from the, matter., , https://abdullahsurati.github.io/bscit
Page 276 :
https://abdullahsurati.github.io/bscit, , 6. Rewrite the following sentences by avoiding, needless repetitions., (a) Such an act of kindness could be expected of, any living mortal., (b) Her future prospects are full of promise., (c) He again made another attack., (d) It was a fine bright sunny morning., (e) She went home full of a great many serious, reflections., (f) I understand that Mohan and Rama both, agreed upon this point., (g) A rich and wealthy person looks down upon the, indigent and the poor with an eye of contempt., (h) It is all meaningless nonsense., (i) Superfluity of unnecessary words and phrases is, altogether improper., (j) He has the entire monopoly of the liquor trade., 7. Remove redundancy and rewrite the following, sentences to make them direct, precise, and effective., (a) Although this option may be safer and less, risky, there is an initial one-month period, of time of great uncertainty at the start of, negotiations., (b) Disclosures made in the footnotes of, the financial statement indicate that the, company has suffered heavy losses due to its, involvement in legal proceedings., (c) Many companies simply cannot gain adequate, access to the information they need to direct, their market efforts efficiently, as our study, shows., (d) A list of all supplies that are needed by each, centre in order to carry out the studies was, prepared., (e) The definitions of objectives and goals must, be systematically made in order to ensure a, successful training programme., (f) For the maximization of the achievement, of our corporate goals, abate your personal, altercations and make sufficient efforts to, realize our mutual cooperative ends., (g) An analysis of the problems in this department, and some recommendations that are, straightforward, simple, and easily evaluated, are presented in this report., (h) The writing is on the wall: a tight monetary, policy will have disastrous consequences., , ELEMENTS OF EFFECTIVE WRITING, , 271, , 8. Change the following sentences to avoid discriminatory language., (a) Any worker who flouts the company rules will, lose his increment., (b) The Executive Committee constitutes of an, engineer, a businessman, and a lady doctor., (c) An efficient salesman has good time, management skills., (d) Handicap seats in the local buses are strictly for, the use of the crippled., (e) The Annual Conference on Prevention of, Earthquakes was represented by three of our, Chinese engineers., 9. The following extracts contain short, choppy sentences which make the style of writing appear, immature. Rewrite after combining the sentences appropriately., (a) The raw data was collected. A questionnaire, was used for collecting this data. The group, analysed the data. It found that most people, preferred air conditioners to air coolers., (b) Ruby and Roberts saw infinite possibilities in, cyberspace. They were determined to turn their, vision into reality. They wanted to build a simple, Internet service for ordinary people. Their friends, scoffed at their ideas. But Roberts and Ruby, doggedly pursued their dream. They analysed, other online services. They also assessed the, needs of their customers., (c) The interview ended. Meera got up. She, thanked the interviewers. They wished, her good luck. Meera observed their facial, expressions. She believed she was selected., 10. Break each of the following breathless sentences, into two or three short sentences so as to make, the sentence readable., (a) There is no particular gadget which will, produce excellent writing but using a yardstick, like the Fog Index gives us some guidelines to, follow for making our writing easier to read, because its two factors remind us to use short, sentences and simple words., (b) We might be able to replace a significant portion, of our interdivisional travel with electronic, meetings that utilize videoconferencing, real, time document sharing on PC screens, and other, alternatives not with a view to reduce employee, or team effectiveness, but to act in unison with, , https://abdullahsurati.github.io/bscit
Page 277 :
272, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , other companies which are using these new, tools to cut costs and reduce wear and tear on, employees., (c) The company provides Phase I and Phase II environmental site assessments, preparation of, site closure repairs, installation of groundwater, monitoring wells and testing of soil and, groundwater samples of environmental, contaminants, which are possible because of, the facilities available in the company’s testing, laboratory, which is certified by ISO, copy of, which certification is enclosed., 11. Identify the cluttering phrases in the following, sentences, change them into single words and, rewrite the sentences., (a) This study is being conducted for the purpose, of determining the material durability and is, expected to be completed in the near future., (b) Due to the fact that the lesson on cloning is, quite interesting but difficult, the instructor, decided to brief the concept prior to the start, of the lesson., (c) In view of the fact that around 20 percent of, the information carefully collected by NASA on, Jet Propulsion Laboratory during the course, of the year 1976 has been lost, the Defense, Department can no longer read certain, records., 12. Remove the redundant words from each of the, following sentences so as to make it concise., (a) In all probability we are going to use an, aluminium plate with the glass honeycomb, collector., (b) It is essential to understand thoroughly, fully,, and completely, the basic fundamentals of the, physical characteristics of the machine., (c) These evidences are adequate enough in order, to terminate their services., 13. Remove the ambiguity and rewrite the following, sentences., (a) Early failures tended to discourage further, investments in robotics technology of time, and money., (b) Despite the intensive training computer, failures are sometimes difficult for maintenance, technicians., (c) Double tracks are found in the main entry to, the mine, similar to the street car tracks in the, city., , 14. Change the passive constructions in the following sentences into active constructions so as to, make them direct and concise., (a) The damage was caused as the material was, exposed to sunlight., (b) Many electronic and mechanical processes are, mostly explained by students by using block, diagrams., (c) Besides digitized images, a wide variety of, graphics that supplement written material are, created by writers., 15. Make the following sentences more emphatic by, rearranging the words or phrases:, (a) This machine costs `5,00,000 but saves our, maintenance costs by `2,000 annually., (b) Although Printwell Publishers enjoyed record, sales in the year 2002, it lost money., (c) India, which has the lower wage rates, was, selected as the production point for electrical, goods., 16. Rewrite the following passages so as to make it, more clear and effective, (a) As the General Manager occupied his coveted, chair, he witnessed an outrageously turbulent, scene in the meeting. The Purchase Officer, and Works Manager, at loggerheads with, each other right from the word ‘go’, made the, General Manager feel why in the first place, had he called both in a meeting considering, the fact that there was mutual animosity for, each other. Both of the officers breathing fire,, it became difficult for each item in the agenda., He tried to intervene but in vain. Both the, Purchase Officer and Works Manager were, charging in, firing on all cylinders. The General, Manager was in utter dismay. Once he even, tried to impose his authority by speaking, vituperative words but both the officers in, duel were least bothered. With every minute, passing, the precious time getting lost without, much fruitful discussion, the General Manager, wondered how to bring these two recalcitrant, subordinates under his control. What he, lacked most was the authority; he searched, for a symbolic gavel that decides the judge’s, authority in a court. But he was not a judge., He was a managing engineer—an engineer, with managerial responsibilities. But as things, went on in the meeting, it appeared that his, , https://abdullahsurati.github.io/bscit
Page 278 :
https://abdullahsurati.github.io/bscit, , unruly juniors, who were much too overt and, trenchant to be tackled, managed him., (b) To begin with, in the development of your, com-munication strategy, you assess your, credibility from your perspective of the, transmitter of the message. What your, audience knows about you will determine, your credibility from their per-spective. Your, credibility is not fixed but is mutable. On, occasions, if you have had no former contact, with your audience, they can merely assess, your credibility from what amount of meagre, infor-mation they preserve about you. In, short, you can impart more information about, yourself through your message, which enables, your audience to accommodate their view of, your believability. Your before and after levels, of credibility are what Munter calls ‘initial’ and, ‘acquired’ credibility., The aim then should be made to increase, your acquired credibility to doing a selfanalysis and self-introspection of your, credibility. Your audience always envisages, your knowledge about you from the content, of communication. If you are delivering an, oral presentation on sales projections for your, company, exempli gratia, the audience will, discern your status quo and your arena. If you, are grouching about the miserable service in, your bank branch, your audience will realize, you are a regular customer and may have, some information about your dealings in the, bank. In either case you have some prima, facie credibility and have the opportunity, by, taking a strategic approach, to acquire more, credibility., , (c) Enthusiasm is one of the most vital, elements that human beings can make, use of to become successful and ultimately, turn all their defeats into victories which, they can boast of in their life. In order to, be quite effective in your life, you need, not simulate or pretend, but shedding aside, all these simulations or pretensions, you are, supposed to be quite sincere and genuine, in your efforts to convert your defeats into, victories. When you pretend to be what, , ELEMENTS OF EFFECTIVE WRITING, , 273, , in reality you are not, then everything, about you seems quite ostentatious but, hollow, and when you are genuine, people, have to appreciate you by all means. So you, should leave no stone unturned. In short, try, really hard to become what actually you are. It, is very uncomfortable to remain your original, self, but it is very hard or rather quite an, exacting task to pretend. As far as enthusiasm, is concerned you should try to discriminate, between real and fake enthusiasm. If you, shout, shrink, howl, cry, and indulge yourself, into something boisterous, then it is apparent, that this type of enthusiasm is not pure, but fake. Truly genuine enthusiasm can be, inculcated on the basis of your awakening, experiences. When you know things and have, the experiences, then only can we bask in, the glory of enthusiasm. In short, you should, have the ability to discriminate between real, enthusiasm and fake enthusiasm. We can be, enthusiastic about things only when we wield, complete knowledge about something. So,, wake up to the power of enthusiasm!, (d) It is a well-stated fact that those we recruit, are not inchoate but have the innate ability, to solve pro-found technical problems. What, we are unaware of is how exactly they can, explain and identify the technical problems,, how dexterously they can manage, and, how eloquently they can communicate. We, endeavour to find all those pertinent things, out before we hire them. We invariably ask, for a short piece of writing, usually an answer, to some technical problem that we are quite, sure they will not fail to solve. This brings to, fore their communicative skills, which enables, us to gauge their potential, and when we, bring them for an on-site interview, we make, an earnest request to them to make an oral, presentation on some technical area in which, they are experts. Though, to tell you the truth,, we are not really interested in what they have, to say. The candidate is completely oblivious, of this fact. They zero in on their technical, knowledge, and to their consternation, all we, want to know is how well they communicate., , https://abdullahsurati.github.io/bscit
Page 279 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 12, , The Art of Condensation, , OBJECTIVES, , INTRODUCTION, , You should study this, chapter to know, , • the importance of being, , concise and relevant, while preparing technical, documents, • the various steps involved in, condensing a text, • how to prepare an effective, précis of the given text, , In today’s fast-changing, technology-driven world, acquiring the art of, summarizing and essential writing skill is crucial, as it saves time and, promotes effective communication. This skill is helpful in preparing, synopses, abstracts, and executive summaries, which are essential, elements of various technical documents., The art of summarizing is also known as précis writing. A précis can, be defined as an abridged form of the text or a piece of writing: Précis, writing involves summarizing a document to extract the maximum amount, of information and conveying this information to a reader in the minimum, number of words., Précis writing does not merely involve paraphrasing (or writing in, one’s own words) from the original document. The summary produced, must be capable of ‘standing alone’ and making sense—the précis must, be complete, informative, and easy to read., There is no fixed length defined for a précis, but normally it is written, in one-third of the number of the words in the original passage. The, following qualities are essential to a précis:, Completeness The précis must have the essential contents of the, original passage without omitting any important fact or idea., Compactness All the ideas reproduced from the original document, should form a compact whole. The words and sentences should convey, a sense of unity with each other., Conciseness Conciseness is achieved by the process of sifting, essential from unessential information, by avoiding repetition, and, by omitting ornamental phrases. However, conciseness should not, be achieved at the cost of clarity. All, ‘Clarity precedes success.’, the original essential ideas should be, –Robin Sharma, presented clearly but in brief., https://abdullahsurati.github.io/bscit
Page 280 :
https://abdullahsurati.github.io/bscit, , THE ART OF CONDENSATION, , 275, , Clarity This can be achieved by getting rid of circumlocutions and unclear statements. It, should be intelligible to even those readers who have not gone through the original document., Coherence All sentences and ideas in a précis should follow a reasonable and natural order, of development. Thus, the précis should not look like a collection of disjointed sentences, but a, well-connected whole., , STEPS TO EFFECTIVE PRÉCIS WRITING, Given below are the step-by-step instructions for summarizing any given piece of writing., , Identify the reader and purpose of the précis, This step determines how much detail should be included and how formal the précis needs to, be. For instance, the précis from a textbook chapter for study purposes need not be as carefully, refined as the executive summary of a formal report for an important client., Read the original document, Skim-read the document to get an overview, then read it again slowly to identify the main, themes and to distinguish the key ideas and concepts from the unimportant ones., Underline the key ideas and concepts, Each paragraph should have one key topic, which the rest of the paragraph clarifies, supports,, and develops., Write down a title that sums up the theme of the passage., The title or heading is the précis of a précis and indicates what is to follow. Hence, it should, reflect the central idea of the passage. It can be a word, a phrase, or even a short sentence. A, suitable title must be provided even if it is not asked for., Write a note-form summary of each paragraph, The passage should be summed up in the form of points. This should always be done in one’s, own words as far as possible. All irrelevant material should be omitted., Write the précis, The original text should be paraphrased to express the summarized points more concisely and, to develop them into coherent sentences, expressing all important points in a generalized form., Any repetitions or irrelevant details should be eliminated. Only the third person and indirect, speech should be used. No personal comments should be added., Review and edit, ‘There is great power in, words if you don’t hitch too, many of them together.’, , –Josh Billings, , Compare the précis with the original document and make sure that it, emphasizes the same points. Ensure that the précis is readable, concise,, and coherent., Although we have discussed these tips or techniques in the earlier, chapters, some examples are given in Table 12.1 as a ready reckoner., , GUIDELINES, The following are guidelines for effective précis writing:, , • The theme of the passage must be determined very carefully., https://abdullahsurati.github.io/bscit
Page 281 :
276, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , TABLE 12.1 Guidelines for effective précis writing, , Type of ineffectiveness, Redundancy, , Original version, Revised version, (a) The analysis was thoroughly and (a) The analysis was complete. (4), wholly complete. (7), , Circumlocution, , (b) The Chairman wants to meet those (b) The Chairman wants to meet the, employees of the production, employees who are working in the, department to discuss the crisis, production department, so that, immediately. (16), he can discuss the difficult crisis, immediately. (23), (a) Objects, on our first acquaintance (a) Our first impressions of objects, are the most lasting. (9), with them, have that singleness, and integrity of impression that it, seems as if nothing could destroy or, obliterate them, so firmly are they, stamped and riveted on the brain., (35), , Passive voice, , (b) The reason why the technicians were (b) The technicians were upset, so upset was because their boss, because the boss seemed so, seemed so angry with them. (17), angry with them. (12), (a) If no satisfactory results are obtai- (a) If you do not get satisfactory, results carry out another study, ned, another study is carried out,, including the data of the first, but this time the data obtained from, trial. (18), the first trial is included. (23), , Wordiness, , (b) , After the robot was installed, a (b) , After installation the company, series of problems were faced by the, faced a series of problems with, company. (14), the robot. (12), (a) The secretary’s proposal was adop- (a) The members unanimously, ted with the full agreement of all the, adopted the secretary’s proposmembers. (13), al. (7), (b) It is not fair or just in the interest (b) Monopolizing a particular trade, of the consuming public that any, by any commercial concern is, commercial concern should acquire, unfair to the consuming public., the sole power of trading in some, (14), particular article to the exclusion of, its rivals. (34), , •, •, •, •, •, •, •, •, •, •, , A précis is not the reproduction of important sentences., Conciseness is good but not at the cost of clarity., The précis should be intelligible even to a person who has not read the original passage., The original passage must be condensed in the précis-writer’s own language., A précis is always written in the third person., Statistical information should be treated according to one’s own discretion., All the main ideas in the passage should be given almost equal treatment in the précis., Personal ideas should not be introduced., The original source must not be criticized or changed., The précis should be limited to no more than one-third the length of the original passage;, the number of words must be indicated., https://abdullahsurati.github.io/bscit
Page 282 :
https://abdullahsurati.github.io/bscit, , THE ART OF CONDENSATION, , 277, , Tips for Condensing Longer Sentences, • Try to replace clauses by phrases and phrases by, words., • Make use of one-word substitutions., • Avoid all unnecessary repetitions., , • Link various sentences., • Omit examples, comparisons, contrasts, digressions, and minor details., , SAMPLES, In this section, we give three examples to demonstrate précis writing. The number of words, in each original text is indicated. The original text is followed by a vocabulary list, which gives, the meanings of the more difficult words. This list is followed by a listing of the main points of, the original passage. Thereafter, the précis has been written, constructed using the main points,, indicating the final number of words after condensation., , Original Text 1, A vital factor in the success of any business is the right selection of its administrative staff., In this matter, the management has the inescapable function not only of making the right, selection, but after having made it, also of providing the fullest scope for legitimate ambition, and individual advancement. A management which is so petty as to be jealous of the powers, and authority of the officers will naturally select staff of the submissive type, docile men who, are accustomed to obey without question. It would not take the risk of engaging able and, aggressive/self-motivated employees for the fear that it may one day be supplanted by them., A really go-ahead management which understands the mood of the present times will do the, direct opposite. It will seek out men capable of evolving policies within their own sphere and, will train them to rise to the highest position., In connection with most administrative bodies, management is self-perpetuating and is, responsible for its own succession. Even the ablest management cannot foresee the future with, certainty; its decisions, for the future, are at best intelligent guesses. What, however, it can, and must do is to make available the enterprise to the men who will be capable of taking the, decisions of the future and who are qualified, trained, and tested during the present to do so., No management can rely upon a constant supply of geniuses. It must so, ‘Never be so brief as to, train its staff that, during normal times, the enterprise is capable of being, become obscure.’, run effectively by men of not much more than average ability and with a, –Tryon Edwards, robust sense of purpose. (270 words), Vocabulary vital—important; legitimate—proper; docile—submissive like a slave;, supplanted—removed, replaced; evolving—finding out; self-perpetuating—continuing itself;, foresee—guess; rely—depend; geniuses—very intelligent and able persons; robust—strong and, healthy., Points, , 1. Success in business depends upon right selection of staff., 2. The management must foster the staff ’s proper ambitions and individual advancement., 3. A petty, jealous management selects submissive people for fear of being replaced by, them., https://abdullahsurati.github.io/bscit
Page 283 :
278, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , 4. A progressive management tries to find decision-making, creative geniuses, and trains, them for the present., 5. Good management prepares its own succession for the future; it can only guess, intelligently., 6. As the supply of geniuses cannot be assured, the staff must be trained to run the enterprise, with normal ability and a strong sense of purpose in normal times., , Précis of the original text 1 is as follows:, , Efficient Management, Success in business depends upon the right, selection of staff members and fostering their, proper ambition and individual advancement., A petty, jealous management will select docile, people for fear of being replaced by them, while, a progressive management appoints decisive,, creative, intelligent persons and trains them in, , anticipation of its own replacement. Even the, ablest management can merely guess the future, intelligently. As the supply of geniuses cannot, be assured, the staff must be trained to run the, enterprise with normal ability and a strong sense of, purpose in normal times. (91 words), , Original Text 2, For all industrial development we need power, and the ultimate restriction on power is the fuel, from which it is extracted. Is there enough fuel to satisfy our ever-growing hunger for power? For, conventional fuels, such as wood, coal, and oil, the answer is quite clearly ‘No’. The world’s known, stock of oil is only sufficient to last sixty years at the present rate of consumption and the rate, of consumption keeps going up and up. We are burning too much wood already, and the earth’s, known fuel-wood forests will be consumed soon. Coal is still in fair supply, but in some areas—, notably England—it is becoming increasingly difficult to mine, and it is therefore uneconomical., Besides fuel as a source of power, there is the device for harnessing energy from rapidly, flowing water. Few sources of water power remain untapped, and the power they yield meets, only a fraction of our total need. Moreover, it is not very dependable, because storing water in, reservoirs depends on rains, which are sometimes freakish., Conventional fuels release energy by combustion, but fission makes use of another kind, of fuel, remarkable for its concentration of power. All fissionable material is extracted or, manufactured from two elements, uranium and thorium, and the world has plentiful stock, of them. But even so they will not last forever. There is probably enough to last for several, centuries. Fission in the techniques known up till now converts only one-tenth of one per cent, of its fuel into energy. Complete conversion of fissionable fuels into energy is known at present, at laboratory level only. If it can be harnessed into a practical power device, one pound of, fissionable fuel would be equivalent to three billion pounds of coal. Now the scientists’ quest is, to find out some more efficient process for using these fuels outside the laboratory on industrial, scale. But after even fissionable material is gone, what then? There is no reason to despair. The, sun is continually pouring solar energy on earth—we have only to gather and harness it. Those, who think that humans will one day be left without any source of power are not far-sighted, enough. (364 words), Vocabulary ultimate—final; untapped—not tried; freakish—whimsical; fission—division of, cells; quest—search., https://abdullahsurati.github.io/bscit
Page 284 :
https://abdullahsurati.github.io/bscit, , THE ART OF CONDENSATION, , 279, , Points, , 1. Power, which is dependent upon fuel, is needed for all industrial development., 2. The conventional type of fuel is not going to last for a very long time., 3. There is enough stock of uranium and thorium in the world, and fissionable material,, which can serve as fuel for a very long time, is extracted from it., 4. Scientists are trying to find some efficient process for the use of fissionable material as, fuel for industrial purposes., 5. Besides this, the energy that we get from the sun can also be gathered and harnessed for, our purposes., 6. It is only short-sighted people who think that there will be no source of power left for, humans in the future., , Précis of the original text 2 is as follows:, , Inexhaustible Sources of Power, Power, which is extracted from fuel, is essential for all, industrial development. The fear is that conventional, types of fuel are not going to last for a very long time., Fortunately, we have enough stocks of uranium and, thorium, and all fissionable material, which is a great, source of energy, is extracted from these elements., Scientists are busy researching an efficient process for the use of fissionable material for industrial, , purposes. The solar energy that we receive can also, be gathered, harnessed, and used for our purposes., So people who imagine that in the foreseeable future humans would be left without any source of, power, only display their short-sightedness. (109, words), , Original Text 3, There is no doubt that people are growing more and more interested in the seas, and that there is, a great need for that interest. Humans have long tried to probe the secrets of the oceans to gain, knowledge for its own sake, but there are other practical reasons for doing so. The sea can provide, us with many things that we need in everyday life. Future generations will probably depend more, on the seas for their food, and not only food in the form of fish. Minerals necessary for modern, industries are also there, when we can find out how to extract them., We have explored and mapped most of the land, and we are quickly exploring the air. The, seas present a greater difficulty because we cannot yet, and probably never shall be able to, set, foot on the deep ocean floor., The aim of the extensive ocean-going expeditions, of the marine biological stations around, the coasts, and even of those who simply study the shore uncovered by the tide, is to build, up our knowledge of this vast and unfamiliar world beneath the waves. In some cases the, knowledge gained can be put to practical use, but much of it is for interest only., For the very early mariners, interest lay in the currents, and especially those at the surface that, carried their ships along. They were also interested in the weather over the sea. Yet, even these hardbitten seamen were not immune from a curiosity about the animals and plants that lived below, the waves. Their first impulse may have been to seek trade overseas, or to fish for food, but over, and above this, anything strange or beautiful, whether caught up in their nets or cast ashore by the, tides, caused them to wonder. So, from the earliest time, the pursuit of practical everyday things, https://abdullahsurati.github.io/bscit
Page 285 :
280, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , went on side by side with the inquiry that springs from a desire to know more. Bit by bit grew the, knowledge of the physical features of the seas, of such things as currents, waves, and winds, as well, as of the biology, the knowledge of animals and plants. (359 words), Vocabulary probe—delve deep, find out, explore; extract—derive them, set them; expedition—, journey; beneath—below; immune—to have no effect; impulse—feeling, emotion., Points, 1., 2., 3., 4., 5., , Humans’ interest in the seas is increasing and it is a healthy and useful sign., Future generations are likely to draw more of their food from seas., Exploration of seas is a difficult job., The aim of all marine exploration is to know the world beneath the waves., Even the earliest mariners had interest in exploring the seas for the sake of knowledge., , Précis of the original text 3 is as follows:, , Human Interest in Exploring Seas, Humans’ interest in exploring the seas has, increased and it is a healthy sign. Probably, future, generations are to depend far more on the seas, for their food. Though people have been able to, map the entire land seas offer difficult prospects., The aim of all adventure has always been to know, about the world. Some knowledge thus gained, , may have practical utility, but most of it is for the, sake of interest. Even the earliest mariners, though, their primary interest was to seek out trade routes,, had the curiosity to study the animals and plants, that lived below the waves. This curiosity, of course,, helped them in gaining knowledge. (110 words), , For more solved samples of précis writing, please refer to the CD., , SUMMARY, Writing abstracts, summaries, and synopses is a, necessary part of academic and professional work., Preparing such professional/technical documents, requires concise, clear, and relevant writing. Learning, to write the précis of the given text is a significant, , step in achieving the essential qualities of effective, writing. By understanding the various steps involved, in précis writing given in this chapter and practising, them meticulously, we will be able to condense any, given text with effectiveness and efficiency., , EXERCISES, Summarize each of the following passages in about, one-third of the total number of words. At the end,, write the number of words in your précis., (a) Experiments have shown that in selecting personnel for a job, interviewing is at best a hindrance,, and may even cause harm. These studies have disclosed that the judgements of interviewers differ, markedly and bear little or no relationship to the, adequacy of the job. Of the many reasons why this, should be the case, three in particular stand out., , The first reason is related to an error of judgements known as the halo effect. If a person has one, noticeable good trait, their other characteristics, will be judged as better than they really are. Thus,, an individual who dresses smartly and shows selfconfidence is likely to be judged capable of doing, a job well regardless of his or her ability., Interviewers are also prejudiced by an effect, called the primacy effect. This error occurs when, interpretation of later information is distorted, , https://abdullahsurati.github.io/bscit
Page 286 :
https://abdullahsurati.github.io/bscit, , by earlier connected information. Hence, in an, interview situation, the interviewer spends most, of the interview trying to confirm the impression, given by the candidate in the first few moments., Studies have repeatedly demonstrated that such, an impression is unrelated to the aptitude of the, applicant., The phenomenon known as the contrast effect also skews the judgement of interviewers. A, suitable candidate may be underestimated because he or she contrasts with a previous one who, appears exceptionally intelligent. Likewise, an, average candidate who is preceded by one who, gives a weak showing may be judged as more, suitable than he or she really is., Since interviews as a form of personnel selection have been shown to be inadequate, other, selection procedures have been devised which, more accurately predict candidate suitability. Of, the various tests devised, the predictor which, appears to do this most successfully is cognitive, ability as measured by a variety of verbal and spatial tests. (300 words), (b) A recent phenomenon in present-day science, and technology is the increasing trend towards, ‘directed’ or ‘programmed’ research, i.e., research, whose scope and objectives are predetermined, by private or government organizations rather, than researchers themselves. Any scientist working for such organizations and investigating in a, given field therefore tends to do so in accordance, with a plan or programme designed beforehand., At the beginning of the century, however, the, situation was quite different. At that time there, were no industrial research organizations in the, modern sense—the laboratory unit consisted of a, few scientists at the most, assisted by one or two, technicians, often working with inadequate equipment in unsuitable rooms. Nevertheless, the scientist was free to choose any subject for investigation, he/she liked, since there was no predetermined, programme to which he/she had to confirm., As the century developed, the increasing, magnitude and complexity of the problems to be, solved and the growing interconnection of different disciplines made it impossible, in many cases,, for the individual scientist to deal with the huge, mass of new data, techniques, and equipment, that were required for carrying out research ac-, , THE ART OF CONDENSATION, , 281, , curately and efficiently. The increasing scale and, scope of the experiments needed to test new hypotheses and develop new techniques and industrial processes led to the setting up of research, groups or teams using highly complicated equipment in elaborately designed laboratories. Owing, to the large sums of money involved, it was then, felt essential to direct these human and material, resources into specific channels with clearly defined objectives. In this way it was considered that, the quickest and most practical results could be, obtained. This, then, was programmed research., One of the effects of this organized and, standardized investigation is to cause the scientist to become increasingly involved in applied, research, especially in the branches of science, which are likely to have industrial applications., Since private industry and even government departments tend to concentrate on immediate, results and show comparatively little interest in, long-range investigations, there is a steady shift, of scientists from the pure to the applied field,, where there are more jobs available, frequently, more highly paid and with better technical facilities than jobs connected with pure research in a, university., Owing to the interdependence between, pure and applied science, it is easy to see that this, system, if extended too far, carries considerable, dangers for the future of science—and not only, pure science, but applied science as well. (419, words), (c) Beyond all the hoopla involving fancy terms like, ‘embryonic stem cell research’ and ‘gutted egg, reprogramming’ lay the nasty little fact that technology can xerox you. That is the nub of the whole, hassle. Because who in his or her right mind is, going to object to a sure-fire drug for diabetes?, Come to think of it; nobody has any problem with, a safe and permanent cure for cancer either. Also, notwithstanding all the cacophony of national, and international ethics committees around the, world, mortality thumping and accusations of, playing God, everybody in their heart of hearts, knows that 50 or 75 years from now, cloning will, be as common as warts., The discord and friction is not whether the, benefits of cloning outweigh the possible social, consequences, or that its abuse can unleash, , https://abdullahsurati.github.io/bscit
Page 287 :
282, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , powerful forces which can be exploited to produce, horrendous results. It is not whether it will help, to produce discoveries that would hugely affect, the study of human genetics, development, and, growth or it is an affront to religious sensibilities, by interfering with the natural process. It is not, the subconscious fear that men would no longer, be needed for reproduction. What it is about is not, being able to come to terms with an impending, social upheaval, the likes of which human society, has not seen in its entire ten-thousand-year-old, history. In other words, ‘What does your cloned, child call you?’, By circa 2045 you could walk into the local, clinic and get yourself cloned as easily as eating a, pie. Nine something months later you get delivery, of what? Your child, your brother/sister/yourself?, Strictly speaking though, one reason the child, is your sibling is because it has the exact mix of, your parent’s genes as you have. That is because, the process of cloning is fundamentally the same, as what happens when a fertilized egg splits, into two at a very early stage of development to, produce identical twins sharing the same genetic, blueprint. Usually there is always an age difference, between twins that is measured in minutes;, the only difference is, in your case it would be, measured in decades., Protests of losing diversity of genes and, interfering with the course of Darwinian evolution, are objections that will turn out to be peanuts, compared to the magnitude of this interpersonal, problem we will soon have to deal with. Of course, we will resolve it, but the resolution will probably, demand a jettisoning of a whole lot of received, wisdom and will completely metamorphosize the, way we live with ourselves and others. (440 words), (d) Sweet and cold, with a wonderful mouth feel,, ice cream is an American favourite, but far from, the soft, icy product produced by hand-cranked, freezers, today’s commercial ice cream is a complex product designed and engineered for the, best attributes., ‘There are a variety of formulas which are used, to derive recipes,’ says Dr Robert Robers, associate, professor of food science and director of the Penn, State Ice cream Short Course, the nation’s oldest, and best-known educational program on ice, cream manufacturing., , Legally, ice cream must contain no less than, 10 per cent milk fat, and no less than 20 per cent, milk solids. In general, most ice creams contain, 10 to 16 per cent fat and 9 to 12 per cent nonfat milk solids with 11 to 15 per cent sucrose or, equivalent for sweetness. Then, of course, there are, the flavourings and the emulsifiers and the most, important and often a forgotten component, air., Choices within these ranges produce economy,, premium, and super-premium ice cream., ‘Many people think that the higher the quality, of the ice cream, the higher the fat content since, fat makes the ice cream feel unctuous and creamy’,, Roberts told attendees at the annual meeting of, the American Association for the Advancement, of Science in Boston. ‘Fat is also a cold insulator, and is involved in trapping air and perhaps most, importantly, it tastes good,’ he notes. In essence,, ice cream is frozen foam. During the freezing, and shipping process, proteins in the ice cream, mix encircle the air bubbles incorporated in the, liquid and then the fat stabilizes the bubbles., ‘Protein traps the air, but cannot hold it, much, like skim milk foams’, says Roberts. ‘The fat in ice, cream partially destabilizes and traps the air. In ice, cream, in contrast to other products, emulsifiers, are added to destabilize the fat, allowing partial, agglomeration and air cell stabilization.’ During, ice cream mix manufacture, the ingredients are, measured by weight, and then mixed, pasteurized,, and homogenized., ‘The pasteurization process is required by, law to destroy any potential pathogens and make, the product safe for consumption,’ says Roberts., ‘Homogenization, a high pressure process designed to reduce the size of the fat globules and, increase whispability is very important. Without, homogenization, the mix might over-destabilize, during the freezing process leading to a defect, known as buttery, which is definitely not what, people want in ice cream.’ The pasteurized,, homogenized mix is cooled and allowed to age, for at least four hours to create some fat crystals., Allowing time for the fat to assume the appropriate, form is a critical step. ‘The surface area of the fat in, a quart of mix is equal to about 1,200 square yards’,, says the Penn State scientist., After aging, the mix is ready to be frozen by, commercial ice cream freezers, though much, , https://abdullahsurati.github.io/bscit
Page 288 :
https://abdullahsurati.github.io/bscit, , larger, operate on the same principle as handcrank machines. The outside wall of the freezer gets, cold and a series of blades remove the ice crystals, from the wall and move them towards the centre,, also incorporating air. Roberts and others have, looked at the speed at which the dasher moves to, determine if an optimum setting exists., Contrary to conventional understanding, about, 50 per cent of the energy removed by the refrig, , THE ART OF CONDENSATION, , 283, , eration process is due to the frictional heat created, by the dasher scraping the freezer wall. While freezing under agitation, only about half of the water in, the ice cream mix freezes, leaving the other half liquid. The proteins, salts, and sugars in the mix lower, the freezing point enough to require further freezing. The hardening stage, when the rest of the mix, solidifies, must be done rapidly to avoid the formation of large ice crystals. (620 words), , https://abdullahsurati.github.io/bscit
Page 289 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 13, , Technical Reports, , OBJECTIVES, , INTRODUCTION, , You should study this, chapter to know, , • the importance, objectives,, , and characteristics of reports, , • the different categories of, reports, , • various formats in which, , reports can be presented, , • prewriting steps followed for, preparing reports, , • how to structure a report, • the different types of reports, • how to draft, edit, and, proofread the report, , We see many examples of reporting in daily life. A nurse at the hospital, reports to the doctor in the inpatient ward about the condition of each, patient. A supervisor, at the end of the day, reports to the manager, the progress of the work carried out in his/her supervision. Similarly,, the manager of a bank sends a periodic report to the head office on, the state of deposits, advances, overdraft limits, etc., during the period., Another manager posted in a remote rural area reports to the head, office about the difficulties faced in sanctioning loans to farmers. A, publishing firm keen on introducing a new series of paperbacks into, the market has to ask its marketing research team for a report on the, current reader preference. The managing director of a bank would like, to get a report on the efficacy of the measures introduced by the bank, to promote efficiency in the branch offices., From time to time, the Government sets up committees and, commissions to report on various issues of social, political, and, economic importance. There are various Parliamentary committees,, such as Committee on Human Resources, Committee on Agriculture,, Committee on Industry, Committee on Science and Technology,, Committee on Environment and Forests, and so on, which are set, up to discuss, analyse, and report on various matters pertaining to the, respective Ministries. Such committees meet from time to time, work, out a detailed plan to conduct surveys and collect data from various, sources, and finally submit their findings, and recommendations in the form of a, The word ‘report’ is, technical report., derived from the Latin, reportare—‘to bring back’., Reports are a part of our lives—, Over a period of time, it, starting from school progress reports, has evolved to mean that, through news reports on television and, the gathered information, radio to the many kinds of reports we are, is unbiased and evidencerequired to submit in the course of our, based., work. But what is a report? A report is, https://abdullahsurati.github.io/bscit
Page 290 :
https://abdullahsurati.github.io/bscit, , A report is usually a piece, of factual writing, based, on evidence, containing, organized information on a, particular topic., Remember that all reports, carry legal responsibility., They can be used as legal, instruments. Your activities,, as an employee, and your, competence at work are, reflected through reports., , TECHNICAL REPORTS, , 285, , usually a piece of factual writing, based on evidence, containing organized, information and/or analysis of a particular topic. It is a major form of, technical/business/professional communication. A person transmits, certain facts, ideas, or suggestions useful for another person through a, report. It can also be the description of an event or a condition., , Importance of Reports, , A report is a basic management tool used in decision-making. Hence,, it is extremely important for all organizations, especially for large-scale, organizations that are engaged in different activities handled by different, departments. Their top executives cannot keep a personal watch over all, these activities. Hence, they have to base their decisions on the reports, from the heads of various departments. Reports bear a lot of significance, both to the organizations in which they arise and to the organizations they are submitted, to. The following list will give an idea of the importance of reports and report writing to the, organizations and the individuals., , • A report is the only tangible product of a professional. All the efforts of engineers,, academicians, and researchers culminate in reports that convey to others the efficiency, with which they carried out their assignments., • Reports enable decision-making and problem solving in organizations. Based on the, information presented, analysis discussed, or the suggestions rendered, administrators, can make important decisions and solve serious problems., • Reports help the authorities in planning new ventures and in evaluating men and material. If, an organization wants to open a new branch in a nearby locality, it can plan for the same, more effectively after going through the feasibility report prepared for this purpose., Similarly, if the organization wants to assess the qualities and capabilities of a person, it, can do so by going through the annual assessment form submitted by the supervisor of, that person. It can also evaluate a newly introduced machine or product by listening to, or reading the report prepared for this purpose., • Reports are an important means of information dissemination within and outside the, organization. Many of the routine reports, such as inspection reports, inventory reports,, or annual reports, transmit information across and outside the organization., • Reports serve as a measure of the growth, progress, or success of an organization. The success of, any organization depends on the quality and quantity of information flown through its, personnel in the form of oral or written reports. For instance, an organization focusing on, research can bring out reports from time to time to provide information on the progress, being made, which serve to prove its worth to prospective clients. Also, a manager can, measure the progress his/her department is making by going through monthly reports, on the status of all the projects., • Reports serve as a valuable repository of information. Organizations of various kinds preserve, reports of importance and value for a long time so that they can refer to these reports, whenever needed. For example, an academic institution can refer to the previous assessment, reports it had received from some committee in order to improve its performance., • Reports reveal gaps in thinking. A report can give the recipient an idea about whether the, writer had thought and proceeded logically and whether he/she had conducted an indepth study of the topic., https://abdullahsurati.github.io/bscit
Page 291 :
286, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , • Reports develop certain skills in the writer. Reports not only help organizations but also, help the writer to develop certain skills, such as the ability to organize, evaluate, and, communicate with greater accuracy., , Objectives of Reports, The purposes for which reports are written vary widely. Some important purposes of reports are to, , • Present a record of accomplished work (project report), • Record an experiment (primary research report/laboratory report), • Record research findings or technical specifications (a report on the details of a new, product), • Document schedules, timetables, and milestones (a status report on a long-term plan), • Document current status (an inspection report), • Record and clarify complex information for future reference (a report on policies and, procedures), • Present information to a large number of people (annual report), • Present organized information on a particular topic (a report describing the working of, various divisions of an organization), • Recommend actions that can be considered in solving certain problems (recommendatory report), , CHARACTERISTICS OF A REPORT, In a business report, the, purpose can be to inform,, persuade, motivate, or, express feelings—or a, combination of these., , In this section we will study the important characteristics that all reports, must have., , Precision, Precision gives unity and coherence to the report and makes it a valuable, document. Effective reports must clearly reflect their purpose. The purpose, should direct the investigation, analysis, and recommendations. The purpose determines the, format, content, sequence, and word usage in the report. Hence, first the objective should be, defined clearly, considering the expected response from the audience., Factual details, The report should be very detailed and factual. It should meet the audience’s expectation. The, scientific accuracy of facts is very essential to a good report. Since reports invariably lead to, decision-making, inaccurate facts may lead to disastrous decisions., Relevance, The facts presented in a report should be not only accurate but also relevant. While it is essential, that every fact included in a report has a bearing on the central purpose, it is equally essential to, see that no relevant infor-mation is excluded. Irrelevant facts make a report confusing; exclusion, of relevant facts renders it incomplete and is likely to mislead., Reader-orientation, A good report is always reader oriented. While drafting a report, it is necessary to keep in mind, the person(s) who is (are) going to read it. A report meant for the layperson will be different from, one meant for technical experts., https://abdullahsurati.github.io/bscit
Page 292 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 287, , Objectivity of recommendations, If recommendations are made at the end of a report, they, must be impartial and objective. They should come as, a logical conclusion to investigation and analysis. They, must not reveal any self-interest on the part of the writer., Simple and unambiguous language, A good report is written in simple, unambiguous language., It is a document of practical utility; hence, it should, be free from various forms of poetic embellishment, such as figures of speech. It should be clear, brief, and, grammatically accurate., Clarity A good report is absolutely clear. Clarity, depends on proper arrangement of facts. Report writers, should make their purpose clear, define their sources,, state their findings, and finally make necessary recommendations. They should divide their, report into short paragraphs with headings, and insert other suitable signposts to achieve, greater clarity., , ‘The report is done, but who am I to give it to?’, , Brevity A report should be brief. Brevity should not be achieved at the cost of clarity. Nor, should it be at the cost of completeness. Sometimes the problem being investigated is of such, importance that it calls for a detailed discussion of facts. Then this discussion should not be, evaded. Brevity in a report is the kind of brevity one recommends for a précis. Include everything, significant and yet be brief., Grammatical accuracy The grammatical accuracy of language of a good report is of, fundamental importance. It is one of the basic requisites of a good report as of any other, piece of composition. Remember that faulty construction of sentences makes the meaning vague, and ambiguous., , Special format, The technical report uses a rather involved format including cover, title page, table of contents,, list of illustrations, letter of transmittal, and appendices. These have to be prepared according to, a set standard, which will be presented later in this chapter., Illustrations, Most technical reports contain illustrations, which may be tables, graphs, maps, drawings,, charts, or photographs., Homogeneity, A report should deal with one main topic. All the sections of the report should focus on that, topic., Documentation, Technical reports acquire more value when adequately documented by acknowledging sources, of information in an appropriate style., https://abdullahsurati.github.io/bscit
Page 293 :
288, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , Irrelevant facts make a, report confusing; exclusion, of relevant facts renders it, incomplete and is likely to, mislead., , •, •, •, •, , A good report is, , Precise and brief, Factual, Unambiguous and accurate, Relevant, , • Reader-oriented, • Objective and homogeneous, • Detailed and documented, , CATEGORIES OF REPORTS, On the basis of purpose, frequency, mode of reporting, length, approach, and target audience,, reports can be classified as follows:, • Informative, analytical (purpose), • Periodic, special (frequency), • Oral, written (mode of, presentation), , Informative reports focus, on documenting new, information; analytical, reports assess information, in order to propose a, course of action., , The main purpose of an, informational report is to, present the information in, an objective, factual, and, organized manner., , Analytical Reports, , • Long, short (length), • Formal, informal (approach), • Individual, group (target audience), , Informative Reports, An informative report, as the name suggests, entails provision of all details, and facts pertaining to the problem. For instance, it could be a report that, attempts to trace the growth of Company X in the automobile industry. In, a report of this kind, the presentation of all details that led to the growth, of Company X should be listed in a chronological order., In a report of this kind, the introduction is followed by a presentation, of information or facts and a conclusion thereafter, where all the details, are collated in brief as a recap of earlier sections. Recommendations do, not arise in this type of report., The main purpose of an informational report is to present the, information in an objective, factual, and organized manner. Supporting, data, appropriate order, and good presentation style are important in, writing an informational report., , An analytical report is also known as an interpretative or investigative report. An analytical, report analyses the facts, draws conclusions, and makes recommendations. For instance, a report, presenting production figures for a particular period is informative. But if it analyses the causes, of lower production in that period, it becomes analytical, interpretative, or investigative., An analytical report comprises stages in which there is a proper identification of the problem,, analysis, and subsequent interpretation. Recommendations or suggestions are then incorporated, in the report, depending upon what is required by the report writer. Thus, in a problem-solving, method, the steps observed are as follows:, • Drafting problem statement, • Evolving criteria, • Suggesting alternatives and, evaluation, , • Drawing conclusion(s) and making, recommendations, , Periodic and Special Reports, Periodic reports are either informational or analytical in their purpose. As they are prepared and, presented at regular, prescribed intervals in the usual routine of business, they are called routine, https://abdullahsurati.github.io/bscit
Page 294 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 289, , reports. They may be submitted annually, semi-annually, quarterly, monthly, fortnightly, weekly,, or even daily., Generally such reports contain a mere statement of facts in detail, in summarized form, or, in the layout of a prescribed form, without an opinion or recommendation. Progress reports of, various kinds, inspection reports, annual reports, and sales reports come under this category., At times the routine reports can be analytical or interpretative. For example, when the heads, of various divisions in an organization submit annual assessment reports of their employees to, the higher authorities, they assess the data and give their recommendations so as to enable their, superiors to take certain decisions., Special reports are related to a single occasion or situation. A report on the feasibility of, opening a new branch, a report on the unrest among staff in a particular branch, or a report on, the causes behind the recent fire incidents in a factory are special reports. Special reports deal, with non-recurrent problems., , Oral and Written Reports, Reports can be oral or written depending upon the mode of presentation. When you rejoin, duty after attending an international seminar, you meet your officer and report about the, deliberations of the seminar. This type of reporting comes under oral reporting., An oral report is simple and easy to present. It may communicate an impression or an, observation. While oral reports are useful, written reports are always preferred as they enjoy, several advantages over the oral ones. Table 13.1 compares oral and written reports., TABLE 13.1 Oral and written reports, , Oral reports, • Immediate feedback is possible, • Do not add to the permanent records of the, organization as the information/facts can be denied, • Audience needs to comprehend quickly as and, when these are presented, • May be encumbered with irrelevant facts and, overlook important ones, • Cannot be referred to again and again, • Have less professional value, , Written reports, • Immediate feedback is not possible, • Contribute to the permanent records of the, organization, • Audience can ponder over these reports and, understand at its own pace, • Are more accurate and precise as the writer will be, careful in putting down the facts in writing, • Can be edited, reviewed, stored, and retrieved, • Have more professional value, , Long and Short Reports, Reports are classified based on the frequency of appearance, length, degree of formality, and, purpose. As is evident, long and short reports are classified based on length. When there is a, definite purpose, short reports are suitable as they are precise and concise. Their structure is not, very elaborate and the focus is not on format as well. Sometimes the format is provided by the, organization. Short reports include memo and letter reports. A short report usually begins with, an introduction, followed by the information and then conclusion. However, the format may, vary depending on the situation., In contrast, long reports place a lot of emphasis on the format. It has got elaborate structure, and consists of abundant information. Moreover, it is properly organized and analysed. It is, https://abdullahsurati.github.io/bscit
Page 295 :
290, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , usually produced after detailed research and data collection. These can be further classified as, informative, analytical, and recommendatory reports. Long reports also have a lot of illustrations, to support the discussion., , Formal and Informal Reports, The nature and format decide if the report is formal or informal. A formal report is the result of, proper survey and investigation and is presented in a prescribed format. It is prepared as per the, requirement of the organization. The language is also very formal. The formal reports have all, the elements of reports and follow the laid down rules of writing reports. The length may vary, from a few pages to large volume. These reports include annual reports, auditor’s reports, policy, reports, interpretive reports, etc., An informal report is usually transmitted from person to person. It can vary from a few lines to, several pages. Sometimes an informal report may include raw data that can be used at the time of, need. It is generally targeted at a few people. The memo report is an example of an informal report., , Individual and Group Reports, When a report is classified based on the target audience, it is classified as individual and group, report. A report presents the information in an organized manner in the most usable form to, the set of people. It may describe the series of event to the concerned people. For example, it, may present the government expenditure of the entire year to all the citizens of the nation., Another report on the admission pattern in the engineering college can be presented to aspiring, engineers and their parents. These two are the examples of group report., However, some reports are of concern only to an individual and are not meant for the general, reader. These include the attendance report of an employee or an individual’s progress report., These reports are of more interest to the top authority than anyone else. These reports are called, individual reports. The format and design of these two reports may not vary much, but for the, individual report the formalities can be dispensed with, and a personal touch can be added., In an organization the marketing head sends a group report showing next year’s projections, to all the other functional (line) heads, and the production line head sends an individual MIS, report to another head of the organization. Thus, in the first case, one individual is sending his/, her report to a group of individuals, whereas in the second case an individual is sending a report, to only one individual., , FORMATS, A report may have any one of the following formats:, • Manuscript, • Memo, • Letter, • Pre-printed form, Manuscript format This is the most commonly used format for reports and is generally used, for formal reports. The length of such reports can range from a few pages to several hundred., Further, the manuscript form can be used for all types of reports—informational, analytical, or, routine. As the length increases, these reports include more elements such as abstract, summary,, appendix, glossary, and so on. All the elements of a manuscript report are discussed in detail, later in this chapter under the heading ‘Structure of Reports’., Memo format A report sent to somebody within the organization will be in a memo format., The analysis, conclusions, and recommendations are included in the main text part of the, https://abdullahsurati.github.io/bscit
Page 297 :
292, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Letter format While sending short reports of a few pages to outsiders, one can opt for a letter, format. Besides all the routine parts of a letter, these reports may include headings, illustrations,, and footnotes. The letter report is one of the most personalized forms of reports, but the degree to, which it can be personalized depends upon the relationship between the writer and the audience,, and the circumstances under which it is used. Exhibit 13.2 shows a sample letter report., , EXHIBIT 13.2, , Sample letter report, SINLEY DISTRIBUTING COMPANY, , 3204 Jawaharlal Marg, New Delhi, Mr S.S. Moondra, , September 27, 2014, Akshay Supermarket, Vidya Vihar, Pilani, Rajasthan, Dear Mr Moondra:, Subject: Advantages of Fully Stocked Shelves, As inquiries are increasing from several supermarket executives concerning grocery and drug shelf stocking, I have undertaken, grocery and drug products, with attention given to percentage increases through mass stocking., Seven supermarkets were surveyed, with several brands of products checked for a two-week period under normal shelf-stocking, conditions, and then for two more weeks under fully stocked shelf conditions. Enclosed is the complete result of the survey:, below is a simple breakdown:, , Table 1: Sales in Relation to Number of Items Stocked, , Number of items checked, 2 weeks’ unit sales under normal conditions, 2 weeks’ unit sales when shelves were kept fully stocked, Change in percentage, , On Total Grocery, Product Sales, , On Total, Drug Sales, , On All, Products, , 128, 8,404, 10,287, +22.4%, , 69, 607, 902, +48.5%, , 197, 9,011, 11,189, +24.2%, , If you notice the change in the percentage of sales resulting from fully stocking the shelves, it is obvious that this procedure, is of tremendous value:, Grocery product sales ………………………………. 22.4 per cent increase, Drug product sales ………………………………..... 48.5 per cent increase, All products sales ………………………………....... 24.2 per cent increase, Margin and Turnover, only by reducing markup and increasing stock turnover. Now, if you can increase sales on all products by 24.2 per cent merely, , motivated to purchase something that would never have entered his mind if certain brands had not caught his eye., The rise in the general standard of living has caused a proportional increase in the demand for service. By our very nature,, of brands. That is, substitute displays and printed selling appeals of various manufacturers for personal selling. The consumer, is still our livelihood, and the more he sees, the more he will buy., , Recommendations, , I suggest that you keep your shelves fully stocked at all times to increase sales of merchandise. It has always been our policy, to sell through our retailers, which has been brought to light by the survey., , Yours sincerely, M.K. Hingle, , President, , https://abdullahsurati.github.io/bscit
Page 298 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 293, , Pre-printed form Reports containing routine matter and which are periodical in nature, may be written in a form prescribed by the organization. All one needs to do is to fill in the, blanks in a pre-printed form (see the sample inspection report in Exhibit 13.3). For instance,, a report presenting the performance assessment of an employee, an interim report reflecting, the282, progress, of a project, or a report informing the condition of equipment in a laboratory may, PROFESSIONAL COMMUNICATION, be presented in a printed form wherein the reporter needs to fill in certain details against the, details asked for., , Annexure 8.4, , EXHIBIT 13.3, , Sample inspection, report Report, Sample Inspection, EXCEL Technovation Pvt. Ltd, Ph. No. 377919 Fax: 0141-37978, CUSTOMER CALL FEEDBACK REPORT, , Call Registration Number:, Customer:, Location:, , Date :, , Sys. Model:, , Sl.No.:, , Peripheral/Add-on Model:, , Sl. No.:, , Service Type, , Warranty/AMC/IRB/, Chargeable/Others, , Product, , Home PC/Desktop/Server/, Sun/IBM/Datacomm/, SW/Peripheral/Others, , Call Type, , Ins/CM/PM/Proj/Upj/Upg/Siteinsp/Others, , Call Category, , HW/SW, , Problem Reported:, Event, , Date, , Time, , Event, , Call Reported, , Date, , Time, , Start of Service, , Call Assigned, , End of Service, , Travel Time, , Engineer Hands on Time, , Action Taken:, ______________________________________________________________________________________, Call Status:, , Closed, Pending for Others, , Pending for Spares, , Pending for Customers, , Part Replaced:, , Yes, , No, , Under observation, , Part Number, , Part Description, , Quantity, , Part Serial No., , Part Replaced, Part Removed, , For Customer’s Use: Please rate this call by ticking an option:, Extremely Dissatisfied, , Dissatisfied, , Satisfied, , Extremely Satisfied, , Neither Satisfied nor Dissatisfied, , Customer’s Feedback:, User Name, Email ID/Tel.No, Signature, Date, , :, :, :, :, , https://abdullahsurati.github.io/bscit, , Engineer Name, , :, , Signature, Date, , :, :
Page 299 :
294, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , PREWRITING, Before actually beginning to draft a report, various tasks need to be undertaken, which may be, referred to as the preliminary steps to writing a report. The effectiveness with which one carries, out the tasks involved in these steps decides the effectiveness of the technical report. In fact,, the planning stage is the most crucial one. Enough time should be spent in collecting material,, synchronizing details, and ensuring that nothing has been left out. If the planning is done in, a detailed manner, there are very few chances of errors creeping in at the final stage. In fact,, planning for a report is as important as the process of writing itself. The various steps involved in, report planning are as follows:, • Understanding the purpose and scope, • Analysing the audience, • Investigating the sources of information, , • Organizing the material, • Making an outline, , Purpose and Scope, Purpose refers to the objective of the study, while scope refers to the depth or extent of coverage., Assume that you, as the senior engineer of an organization, have been asked by your department, head to study why the recently constructed flyover did not receive the anticipated feedback from the, users. You are also required to suggest some measures to modify the same. Unless you are clear with, the objectives of the task your report involves, for example, (a) identifying the causes of dissatisfaction, and (b) suggesting remedial measures, you will not be able to proceed in the right direction. It is the, purpose of the report that enables you to decide the amount of data to be collected, the data collection, method to be used, the quality and quantity of information to be included in the report, and the, methodology to be adopted in analysing the situation and arriving at a solution., Further, it is essential to understand the nature of the report—informative or analytical. In an, informative report, one may stress factors contributing to collation of information at the time of, stating the purpose. However, in an analytical report the writer would need to prepare a problem, statement, the analysis of which becomes the thrust area of the report. Depending on the type of, report to be written, there is bound to be a difference in the definition of the problem and purpose., , Audience, The audience for a technical report—or any piece of writing for that matter—is the intended, or potential reader. For most technical writers, this is the most important consideration in, planning, writing, and reviewing a document. One ‘adapts’ his/her writing to meet the needs,, interests, and background of the readers. Lack of audience analysis and adaptation is one of, the root causes of most of the shortcomings of professional, technical, documents—particularly while writing instructions, where inadequacies, ‘Adapt’ your writing to meet, the needs, interests, and, surface most glaringly., background of the readers, One of the first things to do while analysing an audience is to identify, who will be reading your, its type (or types—it is rarely just one type). In general, the audience can, writing., be categorized into three types: experts, executives, and non-specialists., Experts are the people who know the theory and the product inside, out. They designed it, they tested it, and they know everything about it. Often, they have, advanced degrees and operate in academic settings, or in research and development areas of the, government and business departments. More often, the communication challenge faced by the, expert is communicating to the technician and the executive in simpler terms., https://abdullahsurati.github.io/bscit
Page 300 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 295, , Executives are the people who make business, economic, administrative, legal, governmental,, and political decisions on matters that the experts and technicians work with. If it is a new, product, they decide whether to produce and market it. If it is a new power technology, they, decide whether the city should implement it. Executives may sometimes have as little technical, knowledge about the subject as non-specialists., Non-specialists have the least technical knowledge of all. The non-specialist readers are least, likely to understand what the experts are saying, and also have the least reason to try. Their interest, may be as practical as the technicians’, but in a different way. They want to use the new product, to accomplish their tasks; they want to understand the new power technology enough to know, whether to vote for or against it in the upcoming union election. Or, they may just be curious, about a specific technical matter and want to learn about it, but for no specific, practical reason., It is important to analyse the audience in terms of the characteristics explained in the, following sections., Background—knowledge, experience, and training One of the most important concerns is just how much knowledge, experience, or training we can expect in our readers. For, example, imagine you are writing a guide to using a software product that runs under Microsoft, Windows. How much can you expect your readers to know about Windows? If some are likely, to know little about Windows, should you provide that information? If you say no, then you run, the risk of customers getting frustrated with your product. If you say yes to adding background, information on Windows, you increase your work effort and add to the page count of the, document (and thus to the cost). Obviously, there is no easy answer to this question—part of, the answer may involve just how big or small a segment of the audience needs that background, information., Needs and interests While planning a report, we need to know the audience’s expectations, from the report. For example, imagine you are writing a manual on how to use a new microwave, oven—what are your readers going to expect to find in it? Imagine you are under contract to, write a background report on global warming for a national real estate association—what do, they want to read about, and, equally important, what do they not want to read about?, Other demographic characteristics The various characteristics of our readers might have an, influence on the design and writing style of our document—for example, age groups, type of, residence, area of residence, gender, political preferences, and so on., Audience analysis can get complicated by at least three other factors: mixed audience types, for one document, wide variability within an audience, and unknown audiences, If you write to the lowest, common denominator, of readers, you are, likely to end up with a, cumbersome, tedious, book-like thing that will, turn off the majority of, readers. But if you do not, write to that lowest level,, you lose that segment of, your readers. What to do?, , Mixed audience A report can be often meant for more than one, audience. For example, it may be seen by technical people (experts and, technicians) as well as administrative people (executives). Hence, one, must write all the sections so that all the audiences of the document can, understand them. Otherwise, one can write each section strictly for the, audience who would be interested in it, and then use headings and section, introductions to alert the audience about where to go and what to stay out, of in the report., Wide variability in an audience Even though the audience fits into, only one category, there may be a wide variability in its background., This is a tough one—if we write to the lowest common denominator of, https://abdullahsurati.github.io/bscit
Page 301 :
296, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , readers, we are likely to end up with a cumbersome, tedious book-like thing that will turn off, the majority of readers. But if we do not write to that lowest level, we lose that segment of our, readers. What to do? Most writers go for the majority of readers and sacrifice the minority, that needs more help. Others put supplementary information in appendices or insert crossreferences to beginners’ books., Using the following guidelines, you can make a report comprehensible to the non-specialist, reader:, • Add information required by readers in order to understand the report, • Omit information your readers do not need, • Add examples to help readers understand, • Change the level of your examples, • Change the organization of your information, • Use more or different graphics, • Add cross-references to important information, Unknown audience At times the writers do not know who all will be the readers of their, reports. Even in such a situation, it is better for the writers to anticipate a hostile audience and, try to make their reports as justifiable as possible with adequate supporting details. They must, organize the points of justification or evidence in the most convincing manner. In addition, they, need to adopt a neutral and unbiased tone in discussing the topic of their reports., , Sources of Information, To accomplish the objectives of a report, we require facts and ideas. We may find them in, company records, reports, bulletins, pamphlets, and periodicals; we may use library sources, to look for information; we may observe some incident and collect the facts or ideas; we may, conduct personal interviews with people to get information; or we may circulate questionnaires, to get data for our report., Investigating the sources of information is a kind of research. It must be done right in the, beginning. The extent of investigation will, of course, depend on the length and importance of, the report., The two types of data that one can collect are primary and secondary data. Primary data, are what a researcher gathers for the particular problem being addressed in the report. The, important means of collecting primary data for a report are, • Personal observation, • Personal interviews or telephone interviews and experimental data, • Surveys (preparing and circulating questionnaires), , Secondary data are data gathered for some purpose other than the problem at hand. Common, sources of secondary data are, •, •, •, •, •, , Internal records, Published material such as directories, guides, statistical data, government publications, Databases such as bibliographic and numeric databases, Censuses, Syndicated sources (information services provided by research organizations), , Please refer to the CD for details on primary and secondary data collection., https://abdullahsurati.github.io/bscit
Page 302 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 297, , Organizing the Material, Depending upon the topic, purpose, and audience, we can organize the material/data collected, for our report in either of the following:, • The order of occurrence, • A combination of orders, , • The order of importance, , Order of occurrence, Order of occurrence is otherwise known as chronological order. Here, the data or events, are presented in the sequence of their occurrence in time—none of the parts are uniquely, important. For example, the history of a transaction or the procedure for manufacturing or, installing equipment., Order of importance, When the matter/data collected for the report is not of uniform value, we may have to organize, the information in descending or ascending order of importance. Generally, the descending order, of importance is valid for informational reports, as the reader is interested in looking for the most, important information first. For example, feasibility reports (in which immediate needs are more, important than future needs) or a feedback report on a conference recently attended., , Combination of orders, This order is particularly useful in reports involving a double assignment. A combination of, order of occurrence and order of descending importance is fairly common. Examples are a, report on the appraisal of a situation and the recommended changes, and a report on a problem, and the suggested solution., To arrive at the correct order, examine the data as a whole, consider them for completeness,, their relationship to the purpose of investigation, their total significance to the problem at hand,, and then organize in an appropriate order., , Interpreting Information, Once the data are organized, the findings can be presented. It must be presented the way the, reader wants. If the reader wants only in the form of topic and subtopics, mere organizing, the data will be sufficient, but if the reader wants the application of it, some more efforts are, required. Although interpreting the data is a sole mental activity, the following points should, be kept in mind:, , • Present the facts as they are, • Only analyse comparable data, • Do not give your conclusions, • Be conscious of unreliable data, • Interpret only the available data, Be aware of the statistical tools available for the interpretation. There are different ways of, dealing with qualitative and quantitative data. Even the smallest calculation should be explained, to make the content easy and comprehensive for the readers., , Making an Outline, It is extremely important to develop an outline of the report prior to commencing work on the, report. The formatting of the report should be carried out only after completion of the outline., https://abdullahsurati.github.io/bscit
Page 303 :
298, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , An outline is a mechanical framework into which the information collected for the report, can be fitted in bits and pieces. It shows the direction in which one needs to proceed in writing, the report., In school days when our teacher had asked us to write an essay, we used to think about some, points, organize them in our mind, and then jot them down in some order. We also revised, them and modified the order. Then, keeping those points as guidance we started writing on, each. Thus, we could produce a well-organized essay. Report writing also follows similar steps., Thoughts generally do not appear in our mind in a desired order. They usually come randomly,, and we must organize them appropriately and systematically before we begin writing., Preparing an outline requires a considerable amount of time. However, the time spent on a, systematic outline is always beneficial as this helps save time in writing. On the other hand, a report, written without an outline may lack organization and structure and may end up in confusion. The, outline indicates the main topics and subtopics for the report in the form of words or phrases., Go through the following sample outline and the discussion thereafter to make your outline, more effective., , Education System in India, 1. Introduction, 2. Status before Independence, 3. Present status, 3.1. School education, 3.1.1. Primary, 3.1.2. Secondary, 3.1.3. Higher secondary, , 4., 5., 6., 7., 8., , 3.2. College education, 3.3. University education, Status of women’s education, Merits and demerits, Financial support, Employment prospects, Conclusions, , To prepare an impressive outline, you may follow the tips given below., , Use words or phrases, The outline that is prepared with careful planning finally turns out to be the Table of Contents., Various parts of the outline are used as headings and subheadings to the sections of the report., Hence, the words for constructing the headings of an outline should be chosen carefully. We, can choose short constructions (topic headings), which frequently consist of one or two words, that merely identify the topic of discussion; we can also choose longer constructions (talking, headings), which frequently include prepositions that not only identify the subject matter, covered but also summarize the material they cover. Table 13.2 shows some examples of topic, headings and talking headings as they may appear in a segment of an outline., TABLE 13.2 Topic heading and talking heading, , Topic heading, , Talking heading, , 4. Marketing strategies, , 4. Creating strategies for marketing, , 4.1. Feedback, , 4.1. Collecting feedback from relevant areas, , 4.2. Promotional efforts, , 4.2. Designing strategies for promotional efforts, , 4.3. Distribution network, , 4.3. Setting up of new distribution network, , https://abdullahsurati.github.io/bscit
Page 304 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 299, , Use parallel grammatical constructions, Ideas that are parallel in thought must also be parallel in grammatical construction. Therefore,, corresponding parts of an outline, being of equal significance, must be stated in the same, grammatical form. In other words, equal-level headings should be parallel in structure so as to, show similarity. Through parallel headings we can show such equal-level divisions consistently., For example, if we use a noun phrase to express an idea under one subdivision, we must, state the other parts of the same subdivision in noun phrases only. Compare the parallel and, non-parallel constructions given in Table 13.3 to understand the effectiveness of parallel, constructions in an outline., TABLE 13.3 Parallel and non-parallel constructions, , Non-parallel construction, 1. Advantages of computers, 1.1. Internet browsing, 1.2. Promotes sales, 1.3. Analysing data, 1.4. Managing finance, 1. Introduction, 2. Computers mark the beginning of a new era, 3. What are applications?, 4. Advantages of computers, , Parallel construction, 1. Advantages of computers, 1.1. Internet browsing, 1.2. Sales promotion, 1.3. Data analysis, 1.4. Financial management, 1. Introduction, 2. Computers: The beginning of a new era, 3. Applications, 4. Advantages, , Avoid needless repetitions, Repetition of words should be avoided as it will result in monotonous writing, thus making the, outline dull and drab. Look at the original and revised versions of a segment of an outline taken, from a report on Education System in India given in Table 13.4., TABLE 13.4 Avoiding monotony in an outline, , Original, 3. Present status, 3.1. School education, 3.1.1. Primary education, 3.1.2. Secondary education, 3.1.3. Higher secondary education, , Revised, 3. Present status, 3.1. School education, 3.1.1. Primary, 3.1.2. Secondary, 3.1.3. Higher secondary, , By simply eliminating the repetition of the word ‘education’ in all the subdivisions, we have, avoided sounding monotonous., , Follow the principles of coordination and subordination, The outline indicates the level of each heading in the report, that is, how important each heading, is. The closer a heading is to the margin, the greater is its importance in the report. Likewise, as, the headings move away from the margin, they become less important., https://abdullahsurati.github.io/bscit
Page 305 :
300, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , According to the principles of coordination, all the main headings have the same importance, with respect to their relation to the subject and also the seriousness of discussion. So, while, organizing data, main headings of equal importance should be selected. Table 13.5 shows the, principles of coordination., TABLE 13.5 Coordination of headings, , Illogical coordination, 2. Computers: Beginning of a new era, 3. Applications, 4. Education, 5. Industries, 6. Advantages, 7. Disadvantages, , Logical coordination, 2. Computers: Beginning of a new era, 3. Applications, 3.1. Education, 3.2. Industries, 4. Advantages and limitations, , As per the principles of subordination, subheadings should be appropriate to the main heading, under which they are listed. Table 13.6 clearly demonstrates the principles of subordination., TABLE 13.6 Subordination of headings, , Illogical subordination, 3. Applications, 3.1 Education, 3.2 Industries, 3.3 Advantages, 3.4 Limitations, , Logical subordination, 3. Applications, 3.1 Education, 3.2 Industries, 4. Advantages and limitations, , Follow a suitable numbering system, Either the conventional numbering system or the decimal numbering system can be used to, mark the levels of headings in outline. The conventional system uses Roman numerals to show, the main headings and the letters of the alphabet as well as Arabic numerals to show the, subheadings, as shown here:, I. First-level heading, A. Second level, first part, B. Second level, second part, 1. Third level, first part, 2. Third level, second part, (a) Fourth level, (i) Fifth level, II First-level heading, A. Second level, first part, B. Second level, second part, ...., https://abdullahsurati.github.io/bscit
Page 306 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 301, , The decimal system uses whole numbers followed by decimal digits to show main sections, and subsections. Thus, the digits to the right of the decimal show each successive step in the, outline. The following is an example of this system:, 1.0 First-level heading, 1.1 Second level, first part, 1.2 Second level, second part, 1.2.1 Third level, first part, 1.2.2 Third level, second part, 1.2.2.1 Fourth level, first part, 1.2.2.2 Fourth level, second part, 2.0 First-level heading, 2.1 Second level, first part, 2.2 Second level, second part, ...., , STRUCTURE OF REPORTS (MANUSCRIPT FORMAT), Various elements combine together to structure a report, and knowing them will help us in, writing better reports. Although twenty elements are listed after this discussion, all of them, need not be used in a report. While some of them may be included in all reports, some may find, a place only in reports that are to be published., The elements of structure can be selected considering the following parameters: usefulness,, terms of reference, and existing practice., Usefulness refers to the need for including any particular element. For example, when you, write an informational report, you do not require a section on recommendations., The terms of reference (refer to the earlier section on prewriting in this chapter) specify the, objectives of the report. These are limits that are set on what an official committee or report has, been asked to do. If the terms of reference demand suggesting some measures for improving a, situation, a section on recommendations should be included. Otherwise, we can end the report, with a section on conclusions., The elements that constitute a report are also determined by the existing practice in an, organization in terms of producing reports. That is, if an organization does not require an, abstract or summary for a report, these elements can be omitted., The standard twenty elements of structure of a full-fledged report are as follows:, Prefatory parts, , Main text, , Supplementary parts, , Optional elements, , Cover page, , Introduction, , Appendix/appendices, , Frontispiece, , Title page, , Discussion, , References/bibliography, , Letter of transmittal, , Certificate, , Conclusions, , Glossary, , Copyright notice, , Acknowledgements, , Recommendations, , Preface, , Table of contents, , Summary, , List of illustrations, , Index, , Abstract, , https://abdullahsurati.github.io/bscit
Page 307 :
302, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Prefatory Parts, Just as we catch the attention of our audience, introduce our topic, and give them a preview, during the introductory part of our speech, the report writers use the prefatory parts of their, report to get their audience ready for reading the report. They reveal the topic, author, contents, and also introduce the objectives, results, significance very briefly in these parts. Now let us look, into the various parts of the preliminary section of a report., , Cover page and frontispiece, The cover page of the report not only gives it an elegant appearance but also protects it from, damage. It also serves as a quick reference to the readers to know the topic and the author of, the report. The classification of the report (secret/top secret) and report number, if applicable,, may also be mentioned on the cover page on the top left corner and right corner, respectively., To stir the curiosity of the reader, one may superimpose on this cover page some illustrations, such as photographs, drawings, and diagrams, provided these illustrations reflect the, contents of the report. For example, a report on ‘Designing Webpages’ can have a webpage, superimposed on the cover. Any such illustration is known as the frontispiece, which is an, optional element, and generally finds a place in reports that are published., Many organizations have standard covers for reports, imprinted with the organization’s, name and logo, as shown in Exhibit 13.4., , EXHIBIT 13.4, , Sample cover page, , Confidential, , Report no. 115, , Growth of Medical Facilities, in India (2005–2015), , Prepared by, Anuj Singhania, Secretary, , Medical Council of India, August 2015, , https://abdullahsurati.github.io/bscit
Page 308 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 303, , Title page, The title page (Exhibit 13.5) is the first right-hand page of a report. This page is more or less, similar to the cover page, except that it contains the following additional information:, • Name and designation of the intended audience, • Name and designation of the approving authority, if any. (In some organizations the, report does not directly reach the recipient. It may require the approval of an intermediary, before reaching the recipient.), , If needed, the organization’s emblem can be included just above its name given at the bottom, (similar to the cover page, as shown in Exhibit 13.4)., , EXHIBIT 13.5, , Sample title page, , Growth of Medical Facilities, In India (2005–2015), Prepared For, Gautam Chaudhary, Director, Medical Council of India, , by, Anuj Singhania, Secretary, , Approved by, ABC, Medical Council of India, August 2015, , https://abdullahsurati.github.io/bscit
Page 309 :
304, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Certificate, Certain reports, such as project reports and research reports require a certificate vouching the, original contribution of the report writer. Generally, the certificate (Exhibit 13.6) contains the, statement testifying the original work, place, date, and signature of the project supervisor or guide., , EXHIBIT 13.6, , Sample certificate, , This is to certify that the project entitled Growth of Medical, Facilities in India (2005–2015) embodies the original work, done by Anuj Singhania under my supervision., , Date: 26 August 2015, Place: New Delhi, , Prof. Ashok Joshi, , Letter of transmittal, An optional element of reports, the letter of transmittal (or memo of transmittal) conveys the, report to the audience. This serves the same purpose as that of a preface in a published document., As the letter of transmittal is the written version of what we would say if we were handing the, report directly to the person who authorized it, its style is less formal than the rest of the report., For example, the letter would use personal pronouns (you, I, we) and a conversational tone., The transmittal letter usually appears right before the table of contents. The contents of a, letter of transmittal are, • Objectives/terms of reference, • Scope, https://abdullahsurati.github.io/bscit
Page 310 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 305, , • Any other details that may enable, Methodology adopted, Highlights of the analysis, the audience to understand the, report better, Important results, • Acknowledgements, Significance of the study, Suggestions, This type of letter typically begins with a statement such as ‘Here is the report you asked, me to prepare on …’. The rest includes information about the scope of the report, the methods, used to complete the study, and the limitations that became apparent. In the middle section of, the letter, we may also highlight important points or sections of the report, make comments on, side issues, give suggestions for follow-up studies, and offer any details that will help readers, understand and use the report. We may also wish to acknowledge help provided by others., The concluding paragraph is a note of thanks for having been given the report assignment, an, expression of willingness to discuss the report, and an offer to assist with future projects., If the report does not have a synopsis, the letter of transmittal may summarize the major, findings, conclusions, and recommendations. This material would be placed after the opening, of the letter., •, •, •, •, , Acknowledgements, This is a list of persons whom we may like to thank for their advice, support, or assistance of, any kind. It is not only customary but also necessary to acknowledge even the smallest help, rendered by people. While writing the ‘Acknowledgements’, the following guidelines should, be remembered:, • Categorize the audience: Courtesy, real help, emotional support, secretarial assistance,, etc., • Vary the expressions: Do not begin each sentence with ‘I thank’; such a monotonous, beginning will reduce the impact of the acknowledgements. Here are a few openings:, Thanks are due to …, , Inadequate to express my sincere thanks to …, , Our sincere appreciation to …, , I am extremely grateful to …, , We owe a lot to …, , My heartfelt thanks are due to …, , Mere thanks in few words would be highly …, , I acknowledge with thanks the support rendered by …, , • Avoid clichés such as:, First and foremost, , Firstly ......... secondly ......... thirdly, , Last but not the least, , I take this opportunity to thank ..., , • Avoid listing the names, • Divide the content (if long) into well-structured paragraphs, , Table of contents, ‘Table of Contents’, generally titled simply ‘Contents’, helps the reader locate a specific topic, easily and quickly. However, Contents need not to be included in a short report (ten pages or, less). This table is actually the report outline we discussed earlier in its final form, or simply the, frozen outline with page numbers. It indicates, in outline form, the coverage, sequence, and, relative importance of information presented in the report. The Contents page is especially, helpful to readers who wish to read only a few selected topics of the report., The Contents lists all the three parts—prefatory, main, and supplementary—of the report, along with their page numbers. It also lists the illustrations used in the report. However, if the, report has more than five illustrations, a separate ‘List of Illustrations’ page can be included after, https://abdullahsurati.github.io/bscit
Page 311 :
306, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , the Contents. Although the outline can have subheadings up to any level, the Contents page, should include headings up to a maximum of three levels only. Depending upon the length and, complexity of the report, this page may show only the top two levels of headings or only firstlevel headings. See an example of a Table of Contents in Exhibit 13.7., , EXHIBIT 13.7 Table of contents, , Table of Contents, Acknowledgements, , ii, , Abstract, , iv, , 1. Introduction, , 1, , 2. Growth of medical facilities—An overview, , 4, , 3. Hospitals and dispensaries, , 11, , 4. Beds, , 16, , 5. Health centres, , 21, , 5.1. Community, 5.2. Primary, 5.3. Sub, 6. Conclusions, , 30, , 7. Recommendations, , 32, , Appendix, , 34, , References, , 41, , List of illustrations, As mentioned, this page serves as the Contents page for all the illustrations that appear in the, report. Except tables, all other visual aids (graphs, maps, drawings, and charts) are grouped, under the heading Illustrations or Figures. The List of Illustrations gives the titles and page, numbers of all visual aids. When tables and figures are numbered separately, they should also be, listed separately. These lists would enable the reader to quickly locate any specific illustration., Abstract, An abstract gives the essence of the report. In business reports it is known as the synopsis., The length of an abstract is generally 2 to 5 per cent of the report. The length and readership, https://abdullahsurati.github.io/bscit
Page 312 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 307, , of the report decide whether an abstract is to be included. If the report is less than ten pages, it does not require either an abstract or a summary. (While an abstract is more appropriate in, specialist-to-specialist communication, a summary is meant for all readers, and is longer than an, abstract.) A report of 10–50 pages should have an abstract. If it is a long report, more than fifty, pages, it needs both an abstract and a summary. An abstract is especially relevant in specialistto-specialist communication where the reader would be expected to have some background, knowledge of the subject. It does not allow abbreviations, acronyms, or illustrations. It tells the, reader the following:, • Objectives, • Main findings or accomplishments, • Significance, , Exhibit 13.8 shows a sample abstract written for an informative report on the Growth of, Medical Facilities in India., , EXHIBIT 13.8, , Sample abstract, Abstract, , Medical facilities in India have grown considerably over the years. With the primary objective, of providing a clear view of this growth over the years 2005–2015, this report analyses in, detail the various facilities related to hospitals, dispensaries, and centres in our nation., Essentially the study would provide a comprehensive view of the medical facilities, which in, turn would enable the authorities to decide upon improving the same in future., , Summary, While an abstract is more appropriate in specialist-to-specialist communication, a summary,, which is an optional element, is meant for all readers. It is longer than an abstract, 5–10 per, cent of the length of the report. Business reports name, ‘Summary’ as ‘Executive Summary’. It presents the entire, report in a nutshell. Summaries may contain headings,, adequately developed text, and even visual aids. A wellwritten summary opens a window into the body of the, report and allows the reader to form an impression of, how well the topic of the report has been dealt with., Generally, the summary of a report presents information, from various parts of the report in the same sequence as, they appear in the report. After reading the summary,, the audience should know the essentials of the report, and be able to make a decision. Later, when they find, time, they may read certain parts of the report to obtain, additional detail. Table 13.7 presents the differences, between an abstract and a summary., https://abdullahsurati.github.io/bscit
Page 313 :
308, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , TABLE 13.7 Differences between abstract and summary, , Abstract, , Summary, , • Essence of the report, • 2–5 per cent of the report, • More relevant in specialist-to-specialist, , • Entire report in a nutshell, • 5–10 per cent of the report, • Meant for all readers, , • Information is qualitative, • Does not include illustrations, , • Information is both qualitative and quantitative, • May include certain illustrations, , communication, , Preface, The preface, an optional element, is the preliminary message from the writer to the reader. It is quite, similar to the letter of transmittal, except that it does not formally transmit the report. It seeks to, help the reader appreciate and understand the report. The contents of a preface are as follows:, , • Factors leading to the report (what was the prevailing situation or earlier studies carried, out and hence the need for this study and report), • Organization of the report (what do the various sections contain), • Highlights (important observations and findings), • Significance (how the report would enable the readers in further study or research; how, best the study in the report would help them), • Acknowledgements (Frequently, the acknowledgements can be dispensed with the preface., In the preface itself one can express his/her indebtedness to those who helped in the study.), , Generally, the preface appears only when the report gets published., , Copyright notice, Copyright is a form of protection that covers published and unpublished literary, scientific, and, artistic works, whatever the form of expression, provided such work is executed in a tangible or, material form. Simply put, it means that if we can see it, hear it, and/or touch it, it may be protected., Copyright laws grant the creator the exclusive right to reproduce, prepare derivative works,, distribute, perform, and display the work publicly. For example, a copyright statement that, reads ‘© Copyright 2015, OUP, India’ means that the Oxford University Press, India has legal, monopoly over the work, which was produced in 2015., There is one thing that must be clarified, though. The actual intangible idea may not be, copyrighted. What is copyrighted is the tangible result of the idea, which would be in the form, of the published work., An example:, © Copyright 2015 by Maxima Institute of Technology. All rights reserved. This material may not be duplicated, for any profit-driven enterprise., , Main Text, The main text consists of the introduction, discussion, conclusion, and recommendations. This, is the main body of the report, which gives the details of the study such as the method adopted,, data collection methods, and the constraints under which the study was carried out., https://abdullahsurati.github.io/bscit
Page 314 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 309, , Introduction, The function of an introduction is to put the whole report in perspective, and to provide a smooth, sound opening for it. It presents the subject or, problem to the readers and gets their attention. A good introduction must, furnish the readers with sufficient material concerning the investigation, and problem, to lead them to an easy comprehension of the rest of the, report. It should also give the readers a general view of the report before, they plunge into the details. In other words, the introduction is a section, where a broad, general view of the report, rather than a specific and analytical one, can be, presented., An introduction includes the following information:, , A good Introduction, must furnish the, readers with sufficient, material concerning the, investigation and problem,, to lead them to an easy, comprehension of the rest of, the report., , Background of the report Conditions/events giving rise to the project or survey need to be, discussed here. Details of previous investigations and studies can also be included if there is, significant time gap., Purpose and scope The background will logically lead to the purpose of the report. If the, investigator has received the Terms of Reference, they can be presented verbatim. Otherwise, the objectives have to be clearly specified. The purpose statement describes the objective as well, as boundaries of the work. Stating which issues will be covered and which issues will not be, covered is especially important in the case of complex, lengthy investigations., Authorization The authority who has assigned to do the project/conduct the survey should, be mentioned. In other words, the recipient’s name and designation should be mentioned., Basic principles or theories involved The important theories and principles used for, analysing the data should be outlined., Methods of gathering data, should be mentioned., , The methods used or the sources consulted for collecting the data, , General plan in developing the solution (brief outline of methodology), adopted in the analysis should be outlined., , The methodology, , General structure of the report (organization of various sections) The Introduction may, contain subheadings such as objectives and procedures, which serve as significant guideposts, for the readers., Ending the Introduction with an explanation of the general plan of the report will provide, a logical transition to the next section of the report. It can also be ended with the discussion of, the procedures used to gather data; and then the next section would present the results. A brief, outline of the results or main conclusions may also provide a logical transition to the first part, of the Discussion section of the report., The Discussion should lead, the readers through the, same reasoning process, the author used to reach, the conclusions and show, them that they are sound., , Discussion, The discussion section, the lengthiest part of the report, contains the, information that supports the conclusion and recommendations, as, well as the analysis, logic, and interpretation of the information. Here,, information and data are presented, analysed, and interpreted. The, writer must decide between pertinent data to include in the text and less, important information to omit or relegate to the appendix. Meanings,, https://abdullahsurati.github.io/bscit
Page 315 :
310, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , ideas, and facts are made clear to the reader. Comparisons are made, facts are evaluated, and, significant relationships are drawn. The solution of a problem may be given with an explanation, of its advantages and disadvantages. Tables, charts, and other media for presenting figures and, data are used. Other illustrative material may be included (the various types of illustrations that, can be used are discussed in Chapter 1). Emphasis is on the results and their interpretation. The, discussion should lead the readers through the same reasoning process that the author used to, reach the conclusions and show them that they are sound., Opposing contentions should be considered to show how the data prove otherwise. The, writer should not assume that the reader agrees with a concept, unless it is generally accepted., Simple, straightforward statements of facts should be used, as these are most easily understood., Different aspects of the problem are treated in the discussion section. Major subject headings, are used to guide the reader. Points may be arranged to suit the subject and reader., , Conclusion, The conclusion is that section of the report where all the essential points, developed in the discussion are brought together., The function of this section is to bring the discussion to a close and, to, signal, to the readers gracefully that they have reached the end. It also, –Hilaire Belloc, refers to the logical inferences drawn, the judgements formed on the, basis of analysis of data presented in the report, or the findings of the, investigation. This section has the following characteristics:, , ‘Tell your audience what, you are going to tell them., Tell it to them. And then, tell them what you have, told them!’, , •, •, •, •, •, , Uses decreasing order of importance, Can be narrative (in paragraphs) or tabular (in points), Uses narrative type when there are few conclusions, Uses tabular form when there are more conclusions, Both narrative and tabular forms are acceptable but the latter is better for quick, comprehension., • Contains only opinions and never suggests future actions to be taken by the reader, • Does not introduce any new idea not previously introduced into the report, , Conclusions are the result of reasoned analysis and judgement of the data in the report, and serve as a basis for recommendations growing out of the study. They may be summary or, analytical in nature. Thus, the conclusion section is a recapitulation of the significant points, developed in the discussion section. Concluding statements are supported by the facts in the, discussion section., An example of tabular type of conclusion is the following, taken from a consumer-preference, survey made by Swift & Company for the moulded pulp egg carton versus the regular selflocking egg carton:, , 1. The moulded pulp carton is decidedly preferred, both by those having used it (77 per cent of them) and, those who have not used it (68 per cent of them)., 2. Protection is the principal reason of preference for the moulded pulp carton., 3. ‘Hard to open’ and ‘can’t see eggs’ are the principal reasons for disliking the moulded pulp carton, given by, those who have used it., 4. 15 per cent of those preferring the moulded pulp carton had opening troubles—69 per cent of those, preferring the regular type found the pulp carton difficult to open., 5. 45 per cent of those preferring the moulded pulp carton liked to look at eggs before buying, compared to, 74 per cent of those preferring the regular type. ‘Want to see size’ and ‘colour’ were given as reasons why., https://abdullahsurati.github.io/bscit
Page 316 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 311, , Here is a sample of the narrative form of conclusion., , Until the final comparative analysis of sales, there was relatively little to choose between the two cities. Both were, certainly well adapted to a location for conducting the presenting surveys of a small national-scale advertising, agency, although at this point Kansas City has probably shown itself to be slightly more representative of the, nation than Cincinnati. The analysis of retail sales, however, completely changed the picture., , Recommendations, Recommendations pertain to the action that is to be taken as a result of the report. They are, supported by the conclusions, and they are aimed towards accomplishing the purpose of the, report. If the purpose of a report, for instance, is to alleviate employee grievances over wage, incentive plans, the recommendations will suggest ways in which this can be done. Conclusions, and results of investigating the problem will support the recommendations., Like conclusions, recommendations may take the form of a formal, long report., Recommendations generally follow the conclusions. They do not, however, always appear, at the end of the report. They may be given first, especially in recommendation reports. They, are also sometimes treated briefly in the letter of transmittal, preface, and separate summary, section. If the reader is already familiar with the data or is chiefly interested in the action to, be taken, then the recommendation should be presented first to avoid reading through a lot of, material. If the reader is likely to react unfavourably to the recommendation, then it should be, given at the end; the report can prepare the reader for it., Recommendations, depending upon the relationship with the reader, can assume any of the, following three types:, • Tentative (temporary solutions that may have to be reconsidered in future), • Conciliatory (suggestions that may be accepted by the recipient), • Aggressive (recommendations that are mandatory and are to be implemented, immediately), , Supplementary Parts, While prefatory parts precede the main body of a report, supplementary parts follow it. However,, they have a lesser role to play that the prefatory parts because they are not mandatory for a, report. For instance, many reports may not contain documentary evidences such as references,, bibliography, etc. Nevertheless, their importance cannot be ignored as they provide certain, additional details to the interested readers to enhance their understanding of the topic of the, report. The following discussion throws some light on the various supplementary parts of a, report:, , Appendices, This section of a report is used for information that has some relevance to the report but cannot, be easily fitted into the text. It is a convenient way of presenting detailed information particularly, of a descriptive nature, which, if inserted in the main body, would interrupt the smooth flow of, the narrative. Hence, before including any material in the appendix, you should:, , • See whether the material is related to the subject of your report, • Check whether it would interrupt the theme if included in the main body, An appendix should contain (a) material not strictly related to the main argument of the, report but which nevertheless is of interest and (b) material that readers can safely omit but can, consult if they want to examine, the details, and also to carry out further study., https://abdullahsurati.github.io/bscit
Page 317 :
312, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Generally, appendices contain materials such as sample documents, detailed calculations,, experimental results, statistical data tables and graphs, specimen questionnaires or samples of, forms used in investigations, summaries of results achieved by other organizations, etc. An, appendix also helps to present recent work or data added at the last moment. It is better to put, these in an appendix rather than completely rewriting the report., If there are many appendices, they should be named as Appendix A, Appendix B, and so, on. Also, an appropriate title should be given to each of them. However, lengthy and numerous, appendices should be avoided, as they reveal the writer’s poor organization., , Bibliography/references, A bibliography is an alphabetical list of the sources—books, magazines, newspapers, CD-ROMs,, Internet, interviews—that have been consulted in preparing the report. This list is used to, , • Acknowledge and give credit to the sources of words, ideas, diagrams, illustrations,, quotations borrowed, or any materials summarized or paraphrased, • Give the readers information to identify and consult the sources, • Give the readers an opportunity to check the sources for accuracy., , This section may be named as References or Works Cited if it includes works that were, consulted or directly quoted for particular pieces of information, and are mentioned within the, report in the form of citations., Please refer to the online resource centre for referencing and bibliography for all kinds of, technical documents., , Glossary and index, The glossary is a list of technical words used in the report and their explanations. If small in, number, the terms are explained in the form of footnotes. The decision whether to include a, glossary or not depends upon the readers. If they are likely to be unfamiliar with the context, it, would be better to include them., The index is intended to serve as a quick guide to locate the material in the report. The, readers can locate a topic, subtopic, or any other important aspect of the report quickly and, easily. This element is generally used in bulky reports where the Contents do not serve the, purpose of locating a particular issue. The index is arranged in alphabetical order (please see the, index of this book) and is extremely helpful in cross-referencing., , TYPES OF REPORTS, There are many different types of reports. The basic format and elements remain the same but, they vary in terms of the purpose and extent of formality. We will discuss some common types, in this section., , Introductory reports, As the name suggests, these report introduce some topics but do not delve deep into any aspect., They just skim the surface of the issue, to give the audience a preliminary feel of it. Therefore,, these are short reports and do not need subsections and subdivisions. The contents are brief and, to the point., https://abdullahsurati.github.io/bscit
Page 318 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 313, , Progress reports, These reports give regular updates about the progression of a particular ongoing project. It, states the expected or set deadlines and then describes the work done till the date of writing, the report. In case of delay, it specifies the reason for it and the support that can be provided to, finish the work. For instance, in the case of a construction project, a progress report can help in, keeping the track of the progress. Progress report format can vary as per the project undertaken., It can be very formal in case of the report on the progress of the building or it can be informal, in case of students’ thesis work progress and if the report is through email to the supervisor. In, some situations it has a pro forma to be filled out., Incident reports, These reports look more like an article than a report. It is used to describe an event or, an accident without distorting the facts to a person who could not witness the scene. It, is very important to maintain accuracy and truthfulness. The order of presentation of, information is important. In general, the events constituting the incident are presented, in chronological order., Feasibility reports, While undertaking a new project or starting an establishment, the possibility of launching it, should be assessed. The pros and cons of it and the cost, gains, glitches should be thoroughly, studied. The report studies the problem, opportunity, and plan for taking action. The conclusions, are very important as they indicate whether the project being considered is feasible, not feasible,, or partially feasible, and hence directly helps decision-making., Marketing reports, These reports are persuasive in nature and begin with marketing objectives, stating the available, resources, plan of action, and goals. It is similar to feasibility report in terms of style, length, and, content. This report is prepared by the marketing department while promoting or launching the, product or while assessing the effectiveness of existing strategies. It contains the details about, segmentation, targeting, and positioning. A market report can be about the global, domestic, or, regional market. It would also include the customers’ perspective about a particular product visà-vis competition. The report should also include the effectiveness of the promotional, pricing,, and distribution strategies., Laboratory test reports, These reports document the various experiments conducted in the laboratory. The observation,, calculation, and results sections of these reports must be prepared with utmost accuracy and, precision. These reports have the following sections:, • Aim, • Results, • Theory, • Conclusion, • Apparatus, • Discussion, • Procedures, • Inference, • Observation, • Possible sources of errors, • Calculations, • Precautions, https://abdullahsurati.github.io/bscit
Page 319 :
314, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Project reports, A project can be defined as a sequence of unique, complex, and connected activities having one, goal or purpose and that must be completed by a specific time, within a budget and according, to specification. At the end of a project the person or the team who has accomplished it writes, a report explaining the details. For instance, as a part of their curriculum, students of technical, and professional courses may undertake some projects of theoretical or practical nature under, the guidance of professors. While some projects may last for a semester, some others may be, completed in fifteen days or one month. But only when they submit their project reports their, project is considered as complete. A student carrying out a project on the topic ‘Effective, use of Internet on campus’ may conduct a survey among the users of Internet on campus,, interpret, and analyse the data collected and suggest some measures to improve upon the, effective use of Internet on campus. When he/she prepares the project report, he/she will, choose appropriate elements and write the report. Such reports generally include the title page,, certificate, acknowledgements, contents, abstract, the main body consisting of three or four, sections, appendices, references, glossary, etc., , WRITING THE REPORT, Any project or study ends with a report. After deciding and formulating a topic, the writers carry, out various activities such as data collection, analysis, discussions, etc. Then they start writing the, report. So this process is the culmination of all the hard work put forth by the report writers., As the report is the only tangible evidence for their efforts, they need to take utmost care of its, structure, layout, and style. They need to understand clearly the elements to be included and in, what order, which parts have to be drafted first, how much background material to be included,, etc. For instance, most writers prepare the main body of the report first and then the other parts., In academic or research reports which include references or bibliography, the writers prepare these, parts while writing the main body. Even experienced writers may not be able to write their reports, in one attempt. Generally, reports go through at least two or three drafts., , First Draft, Once the work is completed, the writer starts preparing the first draft of the report. Writing the, first draft is a step between the preparation and the editing of the report. As already mentioned,, a writer generally prepares the main chapters of the report, then the introduction and finally, the other parts of the report. Once the main chapters (topics) are written, the writer can get, a comprehensive view of the main chapters and then he/she can write the introduction and, abstract. Even at this stage any modification in the outline can be made and once he/she freezes, the outline, it can appear as the contents page in the report. Given below are certain guidelines, in preparing the first draft of a report., • Start writing Chapter 2 and go on till the concluding chapter. Then write the Introduction, and the Abstract, • Prepare the references/bibliography as and when you prepare the main topics, • Prepare the prefatory parts and the appendices, if applicable, • Keep in mind the elements of effective writing discussed in Chapter 7, • Ensure that the analysis on all main topics has been included; the trends discussed and, suitable illustrations have been added at appropriate places (Refer to Chapter 1), • Refer to the characteristics of each element of the report discussed in the previous, sections of this chapter while writing your first draft, https://abdullahsurati.github.io/bscit
Page 320 :
https://abdullahsurati.github.io/bscit, , TECHNICAL REPORTS, , 315, , Revising, Editing, and Proofreading, After completing the first draft of the report, it should be reviewed carefully. The type of the, report, its utility, the time available, and also the effectiveness of the first draft determine the, amount of revision needed., The first draft is reviewed for the following:, •, •, •, •, •, •, •, •, , Accuracy of facts, Clarity of expression, Overall organization, Adequacy and appropriateness of the contents to meet the set objectives, Suitability and conformity of illustrations, Effectiveness in expression, Grammatical accuracy, Correctness of layout, , Basically, editing is the same as revising because its purpose is to correct and improve the, report, and to prepare and check the final copy. Although someone other than the author, generally does editing, nowadays a number of writers edit their own material. Most of them, even do the drafting and revising together, using word-processing software., The report, revised from all aspects mentioned above with additions, deletions, or corrections,, is again read to check and improve it before submission. If the report is to be published, editing, also involves carefully preparing the final copy for the printer. First, the manuscript should, be checked for its correctness, completeness, and clarity of its contents. Then it should be, checked for overall and sectional organization, and finally for the correctness in the mechanics, of style and form. In most instances, after revising meticulously, all one needs is to correct a few, mechanical errors that remain., Proofreading is done at each stage of preparing the first draft to ensure correctness. The, proofreaders should read the copy as a whole, and then check it for form, layout, and mechanical, accuracy. It is not necessary to read for content at this stage. The proofreaders should read each, word and phrase carefully and thoroughly check the punctuation marks. The final copy needs to, be checked against the first draft to ensure that all the corrections are incorporated. There are, standard symbols available for proofreading (refer to the CD). These symbols are marked in the, margin to indicate any corrections required in the text., Almost everybody uses word-processing software these days, and hence tends to proofread, the soft copy rather than the printout. Nevertheless, it is necessary to proofread the print, version, especially for longer documents as the human eye may overlook errors while reading, from the computer monitor., Please refer to the CD for several samples of technical and professional reports., , SUMMARY, Reports are an indispensible part of academic and, professional work. They are important as they are, the tangible product of any project or study, and, many problems are solved and decisions are based, on reported recommendations or conclusions., , Reports put an investigation, analysis, and recommendation together in an organized manner, and, can be used as permanent records as well as legal, instruments., , https://abdullahsurati.github.io/bscit
Page 321 :
316, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Reports must be precise, based on facts, relevant,, reader-oriented, objective, easy to understand, well, formatted, and well illustrated. There are various, categories of reports such as informative and, analytical, periodic and special, oral and written,, formal and informal, and group and individual., They can be presented in manuscript, letter, memo,, or pre-printed format., Identifying the scope and purpose, knowing the, audience, identifying the sources of information,, organizing the material, interpreting the data, collected, and drawing an outline are the prewriting, steps that lead to the preparation of an effective,, convincing report., , The structure of a report can be broken down, into prefatory, main text, and supplementary, information segments. Some of the constituents of, these segments are optional sections, such as the, frontispiece and the copyright., Once we have understood the characteristics,, categories, format, and structure of reports, we, choose the most appropriate type of report based, on the purpose at hand. Using the material prepared, during the prewriting stage, the first draft of the, report is prepared. This draft is then edited and, refined to create the end product, which is a highquality technical, business, or professional report., , EXERCISES, 1. Indicate the difference between the following reports:, (a) Oral and written, (b) Formal and informal, (c) Individual and group (d) Long and short, 2. Discuss the various types of reports. Give an example of each., 3. What is a project report? Write a project report on, the recent project you have done in your college., 4. A company is considering a proposal to establish, a new factory in your town. The Managing Director has asked you to write a report on suitability of, the place for the establishment of this factory. For, this report, an outline is provided below. Study, it carefully and rewrite it in accordance with the, principles of co-ordination, subordination, phrasing, numbering, ordering, etc., Establishment of a New Factory, Outline, 1. Introduction, 2. Fire fighting and Communication facilities, (a) Telephone, (b) Fax, (c) Films, (d) Games, 3. Education and Entertainment facilities, 4. How is the market, A. Potential, B. General, 5. Labour from Local and other plants, 5.0 Raw materials, 5.1 Cost, , 6. Transport facilities, 6.1 Rail, road, air, 6.2 Raw materials, (a) Building, (b) Infrastructural, 7. Recommendations, 8. Conclusions, 5. Develop the material given below into a formal, out-line with appropriate numbers and correct, indentation. The outline is not arranged logically., Rework the out-line into its logical form., Animals I Have Had As Pets, I. Members of the cat family, (a) Baby lion, 1. Three days old, 2. Mother died at local zoo, (b) House kittens, 1. Five of these, II. Members of the dog family, (a) Two young dogs, mixed breed, (b) A poodle, (c) German shepherd, (d) Other dogs, III. Canaries, (a) Two males, (b) Three females, (c) Parakeet, IV. Guppies, V. Members of the reptile family, (a) Young grass snake, (b) Green lizard, , https://abdullahsurati.github.io/bscit
Page 322 :
https://abdullahsurati.github.io/bscit, , (c) Two snails, VI. Goldfish, 6. ‘The District Collector, Jhunjhunu, is concerned, about the rapid increase in the number of road, accidents in Pilani. The Chairman, Municipal, Corporation, Pilani, has been asked to submit a, report investigating the causes and suggesting, measures to improve the situation.’, Prepare an outline for the above report., 7. You, as the Collector of Bhuj District, have been, asked by the Secretary, Home Department, Gujarat, to submit a report on the relief work that was, under-taken after the devastating earthquake hit, the area last year. The Ministry sanctioned Rs 50, crore for the relief operations in the district, which, was to be spent on free distribution of grains, water, medicine, etc. Now prepare an outline keeping in mind the principles of effective outline., 8. Fantasy Garments Corporation wants to open a, new garment branch in a metropolitan city for all, age groups, ranging from formals to casuals. You,, as the Sales Manager of the company, have to prepare a report on the set-up of the new showroom., For this report, prepare an outline which should, have nine main head-ings which contain subheadings up to second level., 9. Rajasthan has been facing severe drought conditions for the third year in succession. In order to, mitigate the sufferings of the drought-affected, areas, the state government is fully geared up to, start drought relief operations with the objective, of generating employment, maintaining cattle, conservation, providing drinking water supply,, etc. As Secretary to the State Minister for Relief, Operations, you have been asked to write a report, on the drought relief operations, to be sent to the, Council of Ministers. Now prepare only the outline for this report., 10. ‘Smoking among the youth in India is on the rise., Studies have consistently shown that smoking, leads to various ailments. Consequently, it is a, major public health concern’., You, as a public health professional, have been, asked to suggest measures to reduce this problem after carefully studying the extent of smoking, reasons behind it, awareness about the short, and long-term effects and attitudes of the youth, towards this practice. Therefore, in order to conduct this study, you have decided to carry out the, , TECHNICAL REPORTS, , 317, , survey using a mail questionnaire. Formulate 15, appropriate questions to elicit relevant information from college students about the above mentioned key areas., 11. The management of Reg International, Mumbai,, is greatly concerned about growing absenteeism, among the employees of its various divisions. You, as the Personnel Manager, HRD, have been asked, to investigate the causes of absenteeism and submit a report to the Managing Director. For collecting the relevant data, prepare a mail questionnaire, to be distributed among the employees of the, company. Write a covering letter also. Your questionnaire should have at least twenty questions., 12. The Managing Director, Parag Textiles, Surat, wishes to study the complaints of its employees regarding the new Bonus and Incentive Scheme announced by the Board of Directors last month. As, the Public Relations Officer, you have been asked, to submit a report to make the policy more beneficial and effective for its employees. Assuming you, have already prepared a questionnaire, write a covering letter to be sent with the questionnaire., 13. The Ministry of Health, Government of India proposes to conduct a survey to study the occupational hazards that Information Technology (IT), professionals face. For this purpose prepare a mail, questionnaire to be sent to the IT professionals, working in various multi-national companies all, over Mumbai., 14. National Steel Industries Ltd, Mumbai, plans to, improve the existing parking facility for the various types of vehicles used by its employees. As the, Public Relations Officer, you have been assigned, the task of collecting the relevant information for, a report to be submitted in this connection., Prepare a mail questionnaire to be circulated, among the employees who intend to avail the, parking facility., 15. Modern Institute of Technology, Tikanpur, is a new, educational institute which has well-equipped labs, and a huge computer centre, with all the modern, computing and Internet facilities. These facilities, are made available to students for 24 hours., The Dean, Students’ Welfare Unit, of this Institute, has been receiving complaints about students suffering from various kinds of aches and pains: headaches, lower back pain, especially of coccyx (tailbone), neck pain, along with watering of eyes and, , https://abdullahsurati.github.io/bscit
Page 323 :
318, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , weakness, i.e., debility. Preliminary reports suggest, the reasons to be prolonged sitting in front of the, computers, missing of meals and eating junk food, at odd hours. A disturbing news has caused greater, concern at the academic level: students are using, the Internet facilities for non-academic purposes, like ‘chatting’, viewing movies, listening to music, etc. All this has led to significant behavioural, changes in many students not conducive to their, growth, progress, and development., Assuming yourself to be the Chief Warden of this, residential Institute, write a memo report to be, submitted to the Dean, Student Welfare Division., Your report should include findings and recommendations., 16. The Dean, Community Welfare Division, wishes to, know whether the BITS supermarket should stay, open at night. For collecting the relevant data, 300 customers were interviewed at random. The, results of the survey are given below in the tabulated form:, Table showing % response to the question: ‘Do, you want the store to stay open at night?’, Age Group, , Yes, , No, , Don’t Know, , 10–15, , 43.5, , 38.0, , 18.5, , 16–21, , 64.2, , 29.0, , 6.5, , 22–30, , 54.5, , 44.0, , 1.5, , 31–45, , 37.5, , 47.5, , 15.0, , 46–60, , 18.4, , 70.0, , 11.6, , Now, as Research Officer, write a Letter Report to, be submitted to the Dean, CWD, to enable him to, take necessary decision in this regard. Invent the, necessary details., 17. The Human Resource Department of Kalka Paper, Industry, Mumbai, runs a two-day orientation for, the new office employees every other month. At, this orientation they are apprised of company, history, objectives, etc., with a purpose to familiarize the participants with the industry and give, them a sense of belongingness. Recently, the participants have expressed their dissatisfaction with, such orientation seminars. The HRD Manager has, asked you as the Personal Assistant to analyse the, importance of the orientation and the presentation techniques used and also provide recommendations to make it more interesting and use-, , ful for the participants. Now write a memo report, to be sent to the HRD manager., 18. The Supreme Court has recently banned the plying of diesel-run buses within a metropolitan city., According to the ruling, only CNG (Compressed, Natural Gas) buses are allowed to run on the road., This has resulted in a lot of inconvenience for, the public. The State Government has received a, number of grievances about the inadequacy of, the Metro Transport Corporation (MTC) in meeting the needs of the commuters. You, as the chairman of MTC, have been asked to study the existing situation and report the details in the form of, a letter to the Transportation Ministry of the state., Write a report assuming the following details:, • Total number of buses: 10,000, • Number of CNG buses: 4,500, • Number of school buses: 1,000, 19. Raj Pareek Singh (RPS) University, Kareempur,, wishes to introduce the internal evaluation system and has written to the Registrar, BITS, Pilani., Write a letter report to be sent to the Chairman,, Examination Committee, RPS University, containing relevant information. Your letter report should, be in full block form., 20. The Research Division of National Marketing Council (NMC) conducts research designed to keep its, members informed on general marketing matter., You are a Research Officer of the NMC. You have, been asked by your Marketing Manager to gather, information on purchasing patterns of consumers, across the nation during January–March 2015. The, commodities include food, tobacco & liquor, housing, clothing, medical care, recreation, education,, reading, transportation, etc., Assuming that you have completed this task,, write your findings in the form of a memo report, to the Marketing Manager of NMC. Invent any, other necessary details., 21. The Department of Agricultural Research and Education, Government of India is currently collecting data on the amount of milk, fruit and vegetables, eggs, etc. produced in the year 2014–2015, to formulate a viable National Agriculture Policy, which would take care of animal husbandry and, dairying also. The data collected are given below:, Milk, , 78 million tones, , Potato, , 241.5 lakh tones, , https://abdullahsurati.github.io/bscit
Page 324 :
https://abdullahsurati.github.io/bscit, , Fruit & Vegetables, , 104 million tones, , Fish, , 55.81 lakh tones, , Eggs, , 31,320 million tones, , Onion, , 47.5 lakh tones, , Sports Focus, Week, , 18–25, , 14, , 21, , 35, , 29, , 26–35, , 16, , 13, , 41, , 48, , 36–45, , 17, , 32, , 53, , 25, , 45 onwards, , 12, , 32, , 32, , 25, , Write this report inventing the necessary details., 23. The Rajasthan State Council for Science and Technology (RCST) has been playing a significant role, in promoting the use of science and technology, for the process of development in the state, especially in the rural areas. The table given in the, next column shows the percentage distribution, , Items, , Years, , No., , As the Senior Scientist of this department, write a, report in the form of a letter analysing the above, data and giving the necessary details. Use full, block form and open punctuation. Address your, letter to the State Minister of Agriculture. Invent, the necessary details., 22. The Managing Director of Allied Publishers Company Ltd, New Delhi 110 001, wishes to have a report on the readership of various magazines published by it. As the Public Relations Officer of this, company, you have compiled the data for writing, this report., Table showing the readership in percentages, Financial, Reporter, , 2012–, 13, , 2013–, 14, , 2014–, 15, , 1, , Major, Projects, , 36.7, , 40.6, , 44.5, , 2, , Development, , 36.3, , 50.4, , 48.4, , 23.3, , 8.3, , 6.3, , Building and, Equipment, , 3.7, , 0.7, , 0.8, , Total, , 100.0, , 100.0, , 100.0, , Programmes, 3, , Secretariat, and Travel, , 4, , As Secretary of this Council, analyse this data and, write an analytical report to be submitted to the, Chairman, RCST, Jaipur. Wherever necessary use, illustrations to support your analysis. Invent the, necessary details., 24. Two years ago, Nisbit.com started an online transaction portal for users to do online shopping., After two years, the Chief Executive Officer (CEO), of Nisbit.com feels concerned about the slow, growth of the company. It is observed that the, number of consumers switching to online shopping have not met the expected level. To find out, the reasons for the poor response from the customers, the company has decided to conduct a, nation-wide survey. The following table gives the, finding of the survey., Age-Group, , 19–29, , 30–50, , 51 and above, , Reasons, , M, , F, , M, , F, , M, , F, , Unfamiliar technology, , 15.1%, , 23.2%, , 36.6%, , 45.3%, , 81.2%, , 89.3%, , Security concerns, , 40.5%, , 48.4%, , 55%, , 59.7%, , 4.4%, , 2.1%, , Resistance to change, , 14.6%, , 17.4%, , 24.6%, , 29.5%, , 45.6%, , 51.7%, , Lack of access to Internet, , 38.4%, , 41.1%, , 37.6%, , 44.4%, , 7.9%, , 9.6%, , Inefficient delivery (unreliable), , 34.4%, , 36.2%, , 31.4%, , 35.5%, , 4.8%, , 3.5%, , Preference for traditional shop- 25.1%, ping, , 58.6%, , 19.5%, , 62.3%, , 4.6%, , 38.2%, , 17.5%, 24.3%, 16.4%, 23.6%, https://abdullahsurati.github.io/bscit, , 3.5%, , 4.1%, , Other reasons, , 319, , of expenditure incurred by this Council for the, year 2012–2015., Table showing percentage distribution of expenditure., S., , Age, Women, Group Today, , TECHNICAL REPORTS
Page 325 :
320, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , As the survey manager of the group, write a formal report to be submitted to the CEO of Nisbit., com., 25. Motivating employees for optimal performance, and retaining the trained personnel in an organization is not only very important in today’s competitive business world but also one of the most, difficult tasks that the personnel manager faces in, the organization., A large-scale survey by opinion polls was conducted among Senior Level Managers, Mid-Level, Managers and Floor Supervisors. 300 from each, group participated in the survey in which the respondent indicated one most preferred motivator, for himself at work. The following table gives the, frequency count for responses from each group., Seniorlevel, managers, , MidFloor, level, supervimanager sors, , 80, , 60, , 90, , Knowledge 85, Training, , 30, , 15, , Social, Rewards, , 40, , 65, , 60, , Free, Lunches, , 20, , 55, , 65, , Club Privi- 50, lege, , 60, , 10, , Flexible, Hours, , 25, , 30, , 60, , 300, , 300, , 300, , Money, Rewards, , As the Personnel Manager, write a recommendatory report to the Vice President, Human Resource, Development, of a large corporation. Invent necessary details., 26. At its last meeting, the Executive Committee of, Maruti Udyog Ltd indicated an existing need for, training the three levels of company managers., Hence, the Chairman has asked the Managing Director to analyse the various areas in which training is required for them. As the Managing Director, you have collected the data tabulated below:, Table Showing Training Needs by Different Levels, of Management, , Area, Managing, People, English, Writing &, Oral, Presentation, Skills, Finance, &, Accounting, Computer, Proficiency, , EntryLevel, Managers, No. %, , Middle, Managers, , Senior, Executives, , No., , %, , No., , %, , 34, , 31.5, , 95, , 34.7, , 22, , 32.8, , 36, , 33.3, , 79, , 28.8, , 14, , 20.9, , 26, , 24.1, , 63, , 23.3, , 29, , 43.3, , 22, , 20.4, , 23, , 8.4, , 02, , 03, , Analyse and interpret the given data so as to, enable the Chairman to plan for a Training Programme for the three levels of Managers., 27. The Chairman, Energy Development and Conservation Council, New Delhi, has been concerned, about the recurring mismatch between the demand for electricity and its supply all over the, country. As the Secretary of this Council, you have, been asked to study the sector-wise power consumption pattern and write a report to be submitted to the Chairman. The follow-ing table gives, the data for three consecutive years., Table showing sector-wise power distribution (in, billion units):, Sector, , 2012–, 13, Agriculture 70.70, Commercial 14.14, Domestic, 43.34, , Year, 2013–, 14, 79.30, 15.97, 47.92, , 2014–, 15, 85.74, 16.99, 52.54, , Interpret the above data using appropriate illustrations to support your analysis., , https://abdullahsurati.github.io/bscit
Page 326 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 14, , Technical Proposals, , OBJECTIVES, , INTRODUCTION, , You should study this, chapter to know, , • the definition, purpose, and, , types of technical proposals, , • the characteristics and, , structural elements of, technical proposals, • how proposals are evaluated,, and thus how to write, winning proposals, , Proposals are an important type of job-related writing because their, acceptance can lead to significant operational improvements, new, business, additional jobs, and safer working conditions. The planning,, organizing, evaluating, and writing skills we have learned so far in the, preceding chapters can be utilized for writing technical proposals as, well. However, when preparing these longer messages, we may need, to add some tasks to the familiar categories or pay special attention to, tasks we are already familiar with. For example, besides analysing the, purpose and the audience, the situation needs to be carefully studied, to determine whether a proposal is necessary and which type would be, the most appropriate., In today’s competitive business environment, it is a challenge, to receive new orders, to get new customers, or to find new business, partners. When a firm is considering several companies to outsource, a major part of its operations to, it will evaluate the potential of these, companies on the basis of their proposals to the firm, showcasing, their suitability for the purpose. Hence, proposals have become a very, essential way to get new orders and increase the sales of products., Proposals may include a bid on contract, or a business proposal to a, government authority, another company, or organization., Let us imagine a situation when one endeavours to set up a new, laboratory in an institution and needs to seek the approval of the, administration for the same. The approval may be for a requirement of a, new room, purchase of equipment, or acquiring more manpower. Hence,, the proposal should include the probable location of the laboratory,, its functional strategies, its importance, ‘There is only one way, in the present infrastructure, its likely, to get anybody to do, expenditures, etc. Certainly, some, anything. And that is by, proposals must sell the ideas or projects, making the other person, they offer, but all proposals must sell the, want to do it.’, –Dale Carnegie, writer (or the writer’s organization) as, the one to do the project., https://abdullahsurati.github.io/bscit
Page 327 :
322, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , DEFINITION AND PURPOSE, A proposal is an offer by one party to provide a product or service to another party in exchange, for money. It is usually a sales presentation seeking to persuade the reader to accept the written, plan for accomplishing a task. Proposals may be written to people within, an organization, to an outside company, or to the government. In other, Proposals are written orders, to solve a technical problem, words, proposals are written offers to solve a technical problem or to undertake, or to undertake a project of, a project of practical or theoretical nature. Consultants submit proposals to, practical or the theoretical, companies offering help to solve problems within a company, building, nature., contractors submit proposals to the government on some constructions, for the Public Works Department,, reputed advertising agencies offer to, publicize a product or an idea for a, company, construction, companies, submit proposals to governments abroad to build everything from bridges to, skyscrapers—the list is endless., As said earlier, proposals, in general,, aim to solve a problem, alter a procedure,, find answers to questions, offer advice, and training, or conduct research on a, topic of interest to both parties., However, proposals have varied, purposes, with a wide or narrow scope., ‘We agree that this is an innovative proposal. But we can’t accept it as we’ve, Given below are a few examples to, never seen such a proposal before.’, illustrate the diverse purposes of proposals:, • To construct parking slots, buildings, bridges, highways, • To sell property, such as buildings, machines, airplanes, • To survey areas for possible water sources, • To plan and construct airport baggage conveyor systems, • To modernize the office procedures of a company, • To train international managers for work in foreign countries, • To conduct the basic research before developing an automobile, factory in a foreign country, Proposals serve to review, • To improve engineering performance within a company, and improve existing, products and services to, meet the ever-increasing, and complex requirements, of today’s highly, competitive business, environment., , Proposals serve to review and improve existing products and services, to meet the ever-increasing and complex requirements of today’s highly, competitive business environment. They aim at providing new and sound, ideas to accelerate the advancement of our society., In the following sections, we will discuss the types, characteristic, elements, style and appearance, and evaluation of technical proposals., , TYPES, The two basic types of proposals are sales proposals and research proposals. Both these types, may be either solicited or unsolicited., https://abdullahsurati.github.io/bscit
Page 328 :
https://abdullahsurati.github.io/bscit, , TECHNICAL PROPOSALS, , 323, , Importance of Proposals, 1. Proposals, like reports, are valuable records of, information in an organization., 2. They act as an index of the company’s growth or, progress., 3. Successful proposals give financial returns to the, organization., 4. They help promote various research activities, that are vital for the individual, organization, or, government., , 5. Proposals attempt to win contracts for the, company undertaking the project. Proposal, writing develops certain favourable and useful, skills such as communicative, persuasive, and, organizational skills. It also enhances the power, of estimation, judgement, and discrimination in, the writer., , Sales proposals are also known as business proposals. They are sent outside the company to, potential clients or customers. Sales proposals rarely duplicate one another in either structure or, style. In fact, they often take quite different and creative directions like successful advertisements., Research proposals are usually academic in nature and mostly solicited. Professors, or the, institutions for which they work, may submit a proposal to obtain a grant in response to a, request or announcement from the government or other agency. A research proposal may, even appear in a foreign language. For example, a research proposal submitted by an academic, institution in India to a multinational company in Germany may be in German. Whatever, the research project, the basic content does not vary. All research proposals will contain the, elements discussed later in this chapter., An organization often knows in advance those individuals and corporations that are qualified, to bid on a job or help solve a problem. Hence, requests may come via mail or, in the case of the, government, via newspapers., While preparing a solicited proposal, the company should remember that, in all likelihood,, it will have many competitors bidding for the contract. To be successful at acquiring the, contract, the company will not only have to present excellent reasons to the solicitor to, follow its recommendations but will also have to try to overcome the resistance from its, competitors, i.e., the company’s proposal should have stronger and more powerful arguments, than those of the others. So, it has to meticulously follow the proposal requirements of, the solicitor regarding the problem, the required solution, specific work to be done or, equipment to be installed, format of the proposal, deadlines, etc., Similarly, when a company prepares an unsolicited proposal, it needs to convince the reader that, it understands the receiver’s problem and that it is qualified to solve the problem successfully., , CHARACTERISTICS, Technical proposals, whether they are sales proposals or research proposals, are a persuasive, blend of information, organization, and reason. Essentially, technical proposals should, •, •, •, •, , Demonstrate to appropriate decisions makers that their needs would be met with, Be more creative than other forms of professional writing, Permit informality and personal approach in style to some extent, Keep in view the customer’s convenience, financial gain, and prestige, https://abdullahsurati.github.io/bscit
Page 329 :
324, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Look neat and attractive, • Include summary, background, objective, description of the problem, methodology, and, cost estimate, • Anticipate any possible reasons for rejection and provide suggestions for overcoming, them, • Follow meticulously the requirements of the solicitor, • Contain certain or all elements of structure according to the purpose, usefulness, and, requirements of the recipient’s language, • Use plain, direct, and unambiguous expressions, , Whether a proposal is long or short, simple or complicated, a writer can improve the chance, of securing conviction by making sure that its contents answer the following questions:, •, •, •, •, •, •, , What do we propose to do?, How do we propose to do it?, What evidence can we propose to use that will actually get the desired results?, What evidence can we present to show that ours is the best way to get the desired results?, How can we demonstrate our ability to do what we propose to do?, What evidence must we present to show that the cost will be acceptable and, perhaps,, that we can meet a satisfactory time schedule?, , In providing the information called for, it will be necessary to explain what methods we, propose to use, to show that we have or will obtain the resources necessary to use these methods,, and to offer enough information about costs to show that our estimates are realistic., , STRUCTURE OF PROPOSALS, Major business proposals on selling a company’s services, expertise, equipment, or extensive, installation facilities may use the structure discussed in this section. This structure may also, be adapted for a research study within an academic body. Of course, only long, comprehensive, proposals require most of or all these parts. Proposals on smaller projects may use only a few. For, example, information required for a grant or sales contract of Rs 10,000,000 will undoubtedly, be longer and more insightful than that for a research allowance of Rs 25,000. Therefore, the, elements desirable for a specific proposal have to be chosen carefully., Similar to the structure of reports, all proposals have three main divisions: prefatory parts,, body of proposal, and supplementary parts. Depending upon the need and existing practice, we, may choose the required elements from these parts for the proposal., I. Prefatory parts, • Title page, • Letter of transmittal, • Draft contract, , II. Body of proposal, • Introduction, – Problem, – Need, – Background, • Technical procedures, – Methods and sources, , • Table of contents, • List of tables/figures, • Executive summary, – Objectives or purpose, – Scope and limitation, – Plan of attack, , https://abdullahsurati.github.io/bscit
Page 330 :
https://abdullahsurati.github.io/bscit, , • Managerial procedures, – Sequence of activities, – Equipment, facilities, products, • Cost estimate, • Conclusion, III. Supplementary parts, • Appendices, , TECHNICAL PROPOSALS, , 325, , – Personnel qualifications, , • References, , Prefatory Parts, This segment gives the solicitor or recipient an overall idea about the proposal such as highlights, and coverage. Special attention should be given to this segment, as it creates the first impression, in the reader’s mind. This segment can have the following parts., Title page The title page of a proposal is similar to that of reports. Most organizations, specify the information to be included in the title page, some even provide special forms that, summarize basic administrative and fiscal data. The title page should include at least the title,, the name of the person or company to whom the proposal is submitted, the name of the person, submitting the proposal, and the date., Letter of transmittal This is a cover letter that accompanies or is bound along with the, proposal. Proposals submitted to government organizations may contain the letter of transmittal, immediately after the title page. This cover letter includes a brief introductory, middle, and, concluding paragraph. The topic and purpose are clearly mentioned in the introductory section, of the letter. The middle section contains the proposal highlights and the concluding section, motivates the recipient towards responding positively to the proposal., Draft contract A draft contract is the rough draft of the contract prepared by the proposer., When the proposal is accepted, the original or rough draft may need changes in clauses such, as terms of finance, duration of the project, and delivery schedule. Thus, the contract will be, finalized and signed only after the proposal has been accepted., Table of contents Brief proposals do not require a table of contents. But if the proposal is, long then a table of contents is essential., List of tables and figures, , This list enables the reader to easily locate visual aids, if any, quickly., , Executive summary Even brief proposals should have an executive summary. Seeking, to gain a quick review, some evaluators will initially read only this summary. Hence, the, executive summary should be a concise version of the detailed proposal. It should provide a, brief background, telling the reader the need for taking up this project,, and summarize the objectives, how they will be met, what procedures, The importance of, will be adopted, and also the outcome of the project. Budget figures are, an effectively written, executive summary cannot, frequently omitted because proposal summaries or abstracts may receive, be underestimated. Many, wide distribution. The summary generally ends with a re-emphasis of, consultants believe that, the proposal’s strengths. The length of the summary is usually between, a project is accepted or, 100 and 300 words depending on the complexity of the proposal. Many, rejected solely based on, proposal consultants believe that the executive summary is the most, the impression created by, important part of a proposal. It should create a positive impact, so as to, the summary., induce the reader to read more of the proposal., https://abdullahsurati.github.io/bscit
Page 331 :
326, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Body of the Proposal, The main body of a technical proposal consists of the following five sections: introduction,, technical section, management section, cost estimate, and conclusion., , Introduction, Problem and need The problem statement clearly specifies what it intends to investigate., It should elaborate the existing facilities/procedure and the shortcomings arising out of the, same. It should explain why the problem exists and what benefits will come from the proposed, research., Background This includes information such as the following:, , • Previous work completed on identical or related projects, • Literature reviews on the subject, particularly the proposer’s evaluation of them, • Statements showing how the proposal will build on the already completed projects and, research, , Purpose The objective or purpose of the proposal should be stated clearly. It is often stated, in infinitive form, for example:, • To offer the supply of forty aircraft engines to Aviation Supplier Corporation, • To provide the required training for the newly employed graduates, , Scope This part defines the boundaries of the project. For example, the proposal on a research, study should clearly specify whether it will study one or more areas of a community, company,, department, or a particular problem. The proposal will specify which topics will be outside its, scope. The writer of the proposal has an ethical and legal obligation to clarify the limits of his/, her responsibility to the client., Limitations This section describes the restrictions over which the proposer has no control,, such as the non-availability of some classified information., Project team/personnel Even some short proposals include a listing of the individuals, who will work on the project, including project director/coordinator. In long proposals, such, information is a must including a brief résumé of each individual (educational qualifications,, professional achievements, experience in the area, publications in the relevant field, etc.)., Methods and sources The reader should be informed about the methods and sources that, would be used to collect the required statistical data for the project. It may also include a discussion, on the reliability of the sources from which the required information or data would be collected., For example, a proposal offering software consultancy services to some other organizations may, include a discussion about the journals that have been consulted, the personnel who has been, interviewed to understand the existing problem, and also the authorities with whom the legal, issues have been discussed., , Technical section, Procedures Here, a brief discussion on how the technical requirements of the reader will be, met should be given. This discussion incorporates the following aspects:, https://abdullahsurati.github.io/bscit
Page 332 :
https://abdullahsurati.github.io/bscit, , TECHNICAL PROPOSALS, , 327, , Plan of attack Here, the methodology, that would be adopted to carry out the, project should be presented. For instance,, in a proposal offering to set up Solar, Water Heating Systems in a university, campus, one needs to explain each step, of the process, starting from procuring, materials to installation of the systems., This section can be further divided into, small headings such as materials, system, overview, and installation details. In, ‘I need this proposal approved. Get the best designer in town to draw the, general, this section presents the various, blue prints!’, solutions available for the problem and, the one that has been chosen, justifying the reasons for selecting it., Management section, Sequence of activities This section pertains to managing the job in question. By means of a, Gantt chart or milestone chart, this section presents to the client a clear picture of the phases, of activities of the project and how long each phase will take. This section not only guides the, reader but also facilitates a systematic approach to the execution of the project. The charts, will also show the reader how the bidder is adequately planned and prepared for the various, activities., Equipment, facilities, and products This section explains about the existing equipment,, facilities, etc., and also the additional facilities that may be needed to carry out the project., It may also elaborate upon the infrastructure by listing all the available equipment, products,, facilities, etc. In addition, a detailed list can be included mentioning all those things that are, necessary for the job., Human resources This section presents the details of the human resources requirement to, complete the project. It also elaborates the technical expertise the different personnel have to, accomplish the project. The team organization can also be elaborated upon here, mentioning the, names of the chief coordinator, co-investigators, etc. The company profile can also be included, in this section. The proposer also provides the human resources requirement, which should, include a detailed list of number of persons and also the type of expertise they should possess., , Budget/cost estimate, The budget or cost section is mandatory for all proposals. This provides a breakdown of all, estimated costs for the project. It should include such items as materials and supplies, salaries,, travel, duplicating, consumable items, etc. Some budget sections may be in tabular form or even, in the form of visual aid. It is customary to include a budget justification section, in paragraph, form, stating the various items of expenses the project would incur and also the potential, sources of funding for the project. This would be a further rationale for the financial figures. The, recipient will appreciate the bidder’s acknowledging responsibility for potential cost overruns, and funding shortfalls and the thorough preparation in presenting this estimate., , https://abdullahsurati.github.io/bscit
Page 333 :
328, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Conclusion, This last section provides a final opportunity for the provider to re-emphasize and persuade, the recipient that they have all the resources in terms of material, expertise, and enthusiasm, to accomplish the project. No new ideas should be added here and this section should be very, brief, maybe one paragraph., , Supplementary Parts, Appendices, as in formal reports, are optional in proposals as well. Visuals (maps or graphs) and, some pertinent letters of support and endorsement can be added. But when in doubt it is better, to leave out appendices., References give the list of sources that have been used or quoted in the proposal. References, are usually a part of research proposals that require documentation., , STYLE AND APPEARANCE, All techniques and principles that are applicable to technical communication and report writing, are equally applicable to technical proposals, whether they are for research grants or for a sales, contract., It must be borne in mind that the physical appearance of the proposal makes an important, non-verbal impression. As proposals are evaluated immediately in terms of general appearance,, neatness, specific appearance of the table of contents, list of figures, title page, consistency of, style, completeness, and professionalism, it is very essential to spend a considerable amount of, time in refining these aspects. Each item must be checked and rechecked. It would also help, to adopt appropriate means of visual persuasion. Company logos are often found on each page., Colour and visual aids are used to add effectiveness. For example, a marketing executive’s major,, unsolicited, successful proposal can have on its cover an accurate sketch of the prospective, customer’s buildings. The proposal should be attractively bound and protected by a plastic cover., , EVALUATION OF PROPOSALS, It might seem that in a chapter on writing proposals, a section on evaluation would be, inappropriate, but generally writers produce better products if they understand how their work, will be judged., By giving a scale of values to the following set of questions, the reader can make a point, comparison between competing proposals:, , 1. Understanding of purposes, objectives, and tasks—thirty points., (a) Does the bidder demonstrate clear understanding and acceptance of the requirements, presented in the RFP (request for proposal)?, (b) Are the tasks outlined in the proposal clear and well defined?, (c) Are there important omissions in the specified tasks?, On a scale of thirty points please assign a rating to this area., 2. Technical quality of methods proposed—thirty points., (a) Are sufficient time and resources specified to accomplish the quality outlined in the, proposal?, (b) Does the proposer emphasize quality as an important criterion when presenting, methods?, https://abdullahsurati.github.io/bscit
Page 334 :
https://abdullahsurati.github.io/bscit, , TECHNICAL PROPOSALS, , 329, , (c) Will the quality of the proposed methods be monitored throughout the contract period?, (d) Is this monitoring sufficient to ensure quality?, On a scale of thirty points please assign a rating to this area., 3. Quality of management plan and planning—ten points., (a) Has a management plan been designed to ensure receipt of materials at certain, specified times?, (b) Does the proposal clearly identify working relationships within the contractor’s staff, and with this agency’s staff?, (c) Is sufficient technical management assigned to the task to ensure production and, quality of output?, (d) Will sufficient information be available to this agency to permit analysis of cost and, effectiveness?, On a scale of ten points please assign a rating to this area., 4. Qualification of staff—twenty points., (a) Have individuals to whom the task is assigned had prior experience in the required, technical areas?, (b) Have key personnel been assigned to the project for a substantial time?, (c) Have project directors and those assigned management roles been in similar, management positions before?, (d) Is there sufficient depth in the staff to provide backup and overload capabilities?, On a scale of twenty points please assign a rating to this area., 5. Corporate capability and experience—ten points., (a) Has the organization had previous experience in planning and managing efforts of, this type?, (b) Has the organization previously managed projects of this size and complexity?, (c) Is the organization of sufficient size and stability to undertake the responsibility, called for?, (d) Is there any ‘track record’ of performance available, indicating consistent meeting of, schedules with quality output within fiscal limits, or the inverse?, On a scale of ten points please assign a rating to this area., Although only one of the preceding questions deals directly with expenses, costs are a, primary consideration. In commercial proposals, the first consideration is cost, followed by, performance, reliability, economy of operation, and early delivery of the product., Beyond these considerations are many others, but one of the most important is the tone, of the proposal. Those addressed are extremely concerned that the responsible officials of the, proposing organization are genuinely interested in doing the work and are committed to, providing complete satisfaction, even beyond normal guarantees. In other words, reviewers are, likely to reject a proposal if they believe that they would have to put up with questionable, practices—or with indifference., Many proposals turn out to be unsuccessful because of the following reasons:, • Questionable project design, • Inadequate explanation of the research, • Lack of experience of the investigator, , Other major reasons include vague experimental purpose and poorly prepared knowledge of the, literature. The important point to note is that most of these reasons derive from the presentation, https://abdullahsurati.github.io/bscit
Page 335 :
330, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , of the material, that is, from how the proposals were written rather than from the nature of the, research. In other words, if the investigators had prepared their proposals more carefully, they, might have been successful, and in the world of research and grants as well as in business, a, successful proposal often means the difference between working and looking for another job., Exhibits 14.1 and 14.2 will give you a fair idea of how to write well-structured, persuasive, proposals., , EXHIBIT 14.1, , Sample proposal, , Project Proposal, On, , DEVELOPING MULTIMEDIA STRATEGIES, FOR EFFECTIVE COMMUNICATION, Submitted to, DEPARTMENT OF SCIENCE AND TECHNOLOGY, Rajasthan, By, , T. Krantikiran, , 1997B4A3920, , V. Ravindra, , 1998A6C6489, , Bina Shetty, , 1998A2PS401, , C. Srividya, , 1998A2PS822, , Under the guidance of, Dr. MEENAKSHI RAMAN, Languages Group, , Birla Institute of Technology & Science, Pilani, August, 2015, , https://abdullahsurati.github.io/bscit
Page 336 :
https://abdullahsurati.github.io/bscit, , TECHNICAL PROPOSALS, , STUDENT PROJECT PROGRAMME, 1. Title of the project:, Communication, Name, ID No., (i) T. Krantikiran, 1997B4A3920, (ii) V. Ravindra, 1998A6C6489, (iii) Bina Shetty, 1998A2PS401, (iv) C. Srividya, 1998A2PS822, 3. Class/Year of the students:, (i) 4th year., (ii), (iii), (iv) 3rd year., 4. a. Name of the Project Guide, Dr. Meenaskhi Raman, Assistant Professor, b. Experience of the Guide:, Teaching at various levels for the past 14, years; taken up projects in multimedia, courseware development, c. Address of the Guide:, Dr. Meenakshi Raman, Languages Group, Faculty Division I, BITS, Pilani-333031, Telephone:, 2. Name of the students:, , d. Broad Area/Field of the Guide:, 5. a. Name of the institution:, b. Address of the institution:, , Residence: 42238/44736, Communication., Birla Institute of Technology and Science, BITS, Pilani, Rajasthan - 333031, Ph. 45073 - 307, , 6. a. Project Summary, , communication, which is vital for the growth of an individual as well as the society., grasped even by the lower strata of the society. Moreover, these strategies may prove, to be indispensable for education institutions and professional organizations of any, kind., This multimedia package would incorporate strategies for both verbal and noncommunication such as body language, voice modulation and audience awareness,, and the illustrative aspect of written communication namely, graphic aids., The package would not only be user-friendly but also be informative, thus enabling, the users to develop better communication skills., , Page 2, , https://abdullahsurati.github.io/bscit, , 331
Page 337 :
332, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , b. Technical details of the project, on developing strategies for the same. Though the Internet and other audio-visual aids like audio, and video cassettes, etc. throw some light on techniques for developing language skills, they do not, deal in detail with the various aspects of communication., Even though there are many aspects of communication, the project would limit itself only to, certain aspects of oral and written communication. The project would require the following:, , Software Requirements, , • Multimedia development kit, • Adobe Photoshop, Hardware Requirements, , • A personal computer with Pentium II processor, •, • 32 MB RAM, • Internet connection (preferable for research and analysis of the existing products and to, • Recent publications (literature) on multimedia, 7. Introduction of the project, The development of any society largely depends on the interaction among its people. This, interaction is essential for the ideas, facts, feelings, and courses of action to be transmitted and, , In a country like ours where illiteracy is still prevalent among the lower strata of many societies,, , these strategies can be developed in various ways., strategies through this medium would be of great help to the students, professionals, and laymen., gesture, eye contact, etc. would certainly prove to be of immense help for all these categories of, people. They can use each of these means of non-verbal communication according to the situation, in which they communicate. For instance, people working in an organization may have to deliver, many short or long presentations or participate in meetings, etc. during their professional career;, students may have to give several presentations such as seminars and talks, or participate in group, discussions and interviews during their academic career; laymen need to communicate their ideas,, progress of any society., c., , Objective, , non-verbal). It would mainly focus on:, 1. All aspects of body language, voice modulation, and audience awareness pertaining to nonverbal communication, Page 3, Page 3, https://abdullahsurati.github.io/bscit
Page 338 :
https://abdullahsurati.github.io/bscit, , TECHNICAL PROPOSALS, , 2. Graphic aids, which are vital for both oral and written communication, d. Work plan, , on the written form of verbal communication, and certain aspects of non-verbal communication, such as personal appearance and posture, gestures. The various patterns of communication within, an organization will also be dealt with., In the second phase, the oral aspect of verbal communication, facial expression, eye contact,, and space distancing of non-verbal communication will be developed. Management of information, within the organization, audio-visual aids on business correspondence, reports, group discussion,, meetings, seminars, and conferences will also be dealt with., e. Methodology, • Literature survey, • Collection of materials, • Scripting, • Developing strategies, • Designing strategies through multimedia, f. & g. Organization of work element and time schedule, Phase I, 4 months (approximately), Phase II, 4 months (approximately), as per work plan, 8. Details of facilities to be provided by the institution, • Library, • Computer hardware, • Software for the use of multimedia, • Recording, • Internet access, 9. Budget Estimate:, I. Minor Equipment, 1. Consumables, , Rs. 8,000.00, , 2. Report writing, , Rs. 1,000.00, , 3. Contingency & other costs, , Rs. 1,000.00, , Total, Rs. 10,000.00, 10. Utilization of the outcome of the project, The multimedia package developed in this project will be informative as well as user-friendly., communication, but also enable them to modify and develop their communication strategies. This, , Page 4, , https://abdullahsurati.github.io/bscit, , 333
Page 339 : 334, , TECHNICAL COMMUNICATION, , EXHIBIT 14.2, , https://abdullahsurati.github.io/bscit, , Sample proposal (with covering letter), , Multi-modal Gymnasium, Varanasi-221004, , March 14, 2002, Mr Anuj Sharma, Chairman, Diesel Locomotive Works, Varanasi-221004, Re: Project proposal for setting up of a multi-modal gymnasium in DLW, Dear sir, The attached document, ‘Proposal for Setting Up of a Multi-modal Gymnasium in DLW Institute’,, outlines our project for a modern gym. Reduced man-days and associated costs due to medical, suggest a remedy for these problems. The project is also expected to satisfy the long-pending, This proposal provides you with an overview of the proposed plan, an outline of the work plan, along with the cost estimate, and the suggested plan of action for utilization., This proposal also explores the alternative facilities provided and the utility of each., The authenticity of the proposal is supported by the fact that many leading organizations in the, world including Intel, IBM, GE, TATA, and others have implemented this concept successfully. If, you have any questions or concern about our proposal, please feel free to contact me over my, mobile 9830038796 or by e-mail at
[email protected]., Yours truly, , Anirudh Gautam, DLW, Enclosure: proposal for multi-modal gymnasium, , https://abdullahsurati.github.io/bscit
Page 341 :
336, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , STAFF WELFARE PROGRAM, Draft Contract, , Project Title, , SETTING UP OF A MULTIMODAL GYMNASIUM IN, DLW INSTITUTE, , Name & designation of, , Anirudh Gautam, Dy Chief, Personnel, , Postal address of the, proposer, , DLW, Manuadih, Varanasi, , Name of the institute in which, the gymnasium is proposed, to be set up, , North DLW Institute, , Time required for, commencement of the, project on receipt of approval, , 6 months, , Duration of the project, , 6 months, , Amount of money required, , One-time Cost: Rs 9 million, approximately, , Recurring Expenses: Rs 2.2, million, , Expected Annual Income:, Rs 2.0 million, , Page 2, , https://abdullahsurati.github.io/bscit
Page 342 :
https://abdullahsurati.github.io/bscit, , TECHNICAL PROPOSALS, , EXECUTIVE SUMMARY, This proposal is about setting up of a multi-modal gymnasium in DLW. Last year, risen to 200. Similarly, there has been phenomenal increase in the high blood, pressure, depression, and anxiety cases. In addition, other stress-related medical, problems have shown a rising trend, notably that of the cardio-vascular systems,, digestive, and the nervous systems. Total cost incurred by DLW due to lost, working days and also due to the cost of medical treatment was calculated to, double that of the previous year., In order to arrest these alarming trends through preventive means, it is, , to Yoga therapy and Chinese acupuncture. This technical proposal enumerates, the suggested outline of the proposed gymnasium, conventional and nondue to the same. The proposal also brings out the estimated time schedules for, completion and the cost likely to be incurred., The outcome of this project is envisaged in terms of reduction in lost working, setting up of a multifarious gymnasium in DLW., , Page 3, , https://abdullahsurati.github.io/bscit, , 337
Page 343 :
338, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , TECHNICAL DETAILS OF THE PROJECT, A conventional gymnasium conjures images of weight benches, trestles, parallel, bars, balance beams, tread mills, and weight machines. This was true about, based on traditional health-care systems. Gold’s Gym, a world leader in health and, and care, nutrition and supplementation, weight loss and gain, and anti-aging, and senior health, amongst others. The traditional ‘dhyan’ yoga, acupuncture,, The current proposal for setting up a multi-modal gymnasium in DLW visualizes, stair-climbers, elliptical gliders, upright and recumbent bicycles, and rowing, machines. Concurrently, setting up of an ambient Yoga Centre with the help of, local expertise is also proposed. Upgrading the existing badminton, squash, tennis,, and swimming facilities are also planned., , Page 4, Page 4, , https://abdullahsurati.github.io/bscit
Page 344 :
https://abdullahsurati.github.io/bscit, , TECHNICAL PROPOSALS, , BACKGROUND, In the year 1962, when DLW was set up with American collaboration, the stadium,, the golf course, the indoor badminton courts, the squash courts, the tennis courts,, facilities available to the DLW employees. It can be said with some pride that DLW, employees and their children have excelled in a number of sports and some of, them have even found place in the national teams. Availability of adequate and, wide variety of sporting facilities has been primarily responsible for a healthy, atmosphere in DLW as the number of lost working days due to sickness have been, low compared to other production units of Indian Railways and also IR as a whole., The recent years have, however, seen a rise in the working pressures as DLW, has strived to compete with the global market. There have been demands on, DLW system to bring out new designs of locomotives in less cycle times and at, reduced costs. The competition from Chinese and other Asian suppliers have, privatization and a reducing budget from the Railway Board, DLW has not only, been able to survive but has made a place for itself in the Mid-east, South East, and, African markets. Exports to countries like Bangladesh, Tanzania, Jordan, Sri Lanka,, Vietnam, and Malaysia have been successfully executed., on the mental and physical health of its employees. The number of cases of, cardiovascular diseases has almost doubled in the last three years. The number of, years. There has also been a general increase in grievance levels of the employees, with regard to their future, especially when they compare themselves with other, government departments, which are still insulated from the market economies., recommended certain steps to alleviate the troubles of employees. Setting up of a, Chairman had asked the Personnel Department to put up a proposal for setting, up of a multifarious gymnasium in DLW., , Page 5, https://abdullahsurati.github.io/bscit, , 339
Page 345 :
340, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , STATEMENT OF THE PROBLEM, Figure 1 shows a year-wise break-up of sickness cases registered by DLW hospital., , Figure 1 Year-wise break-up of registered sick cases in DLW hospital, As can be seen, there has been a gradual increase in the number of registered cases, over the past ten years. Year 2000 shows a slight reversal in the number of cases, mainly, to the in-patients department cases. If the out-patients reporting is also added, then the, problem assumes larger proportions. The trend, however, remains the same., Given in Figure 2 is the break-up of the cases in 1991. The corresponding position in, year 2001 is given in Figure 3., , Figure 2 Break-up of registered cases in Year 1991, , Figure 3 Break-up of registered cases in the Year 2001., Figure 4 shows the working days lost in the last year due to medical problems, and the associated total costs. This is compared with the projections for the year, 2002., Pag, a e 56, Page, Page, https://abdullahsurati.github.io/bscit
Page 346 :
https://abdullahsurati.github.io/bscit, , TECHNICAL PROPOSALS, , Figure 4 Working days lost and total cost incurred due to medical, problems, As can be seen, the associated total costs on account of sickness are projected, to double in the current year. The actual expenditure due to lost working days and, due to medical treatment is expected to touch Rs 120 million in the current year. The, , Objectives, through sports, exercises, healthy food habits, relaxed life style, and meditation. A, multi-modal gymnasium will act as a counselling centre for employees with tailorIt is also proposed to maintain a health database of the employees in association, healthy employees with consequent reduction in lost working days and medical, expenditure., , Page 7, https://abdullahsurati.github.io/bscit, , 341
Page 347 :
342, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , WORK PLAN, Phases, For scheduling purposes it is proposed to split up the project into three phases. In the, , hall and upgrading of the tennis courts and the swimming pool are planned., , Coordinator, and the work experience of the Gymnasium Coordinator have to be determined and, responsible for looking after the management of assets worth Rs 10 million and shall, criteria are required to be approved by the Chairman., , Location, It is proposed to locate the cardio-centre and the weight centre of the gymnasium in the, North Institute of DLW. The Yoga and meditation centre is intended to be put up at the, the skirting area around these is planned to be concreted and tiled., , Area, The cardio-centre and the weight-training centre require an area of about 20,000 square, feet. The area has already been surveyed and the vacant stretch in front of the basketball, court in the North Institute premises can be used for construction of the building. For, and the annexe. The area in front of the swimming pool is planned to be utilized for, construction of wash rooms., , Types of Equipment, The cardio-centre is envisaged with the following equipment:, a. Treadmills, , Page, Page88, https://abdullahsurati.github.io/bscit
Page 348 :
https://abdullahsurati.github.io/bscit, , TECHNICAL PROPOSALS, , b. Stair Climbers, c. Elliptical gliders, d. Upright & recumbent bicycles, e. Rowing machines, The weight-training centre is proposed to be equipped with the following, equipment:, a. Weight benches, b. Wall bars, c. Parallel bars, d. Incline boards, e. Balance beams, f. Trestles, g. Weight machine centre, proper ventilation. There are plans to have a tie-up with the Art of Living, Foundation for meditation courses., , Human Resource, , rather volunteers from the existing class ‘C’ and ‘D’ categories shall be screened., , Charges, , 2000/- per month., , Timings, On Saturday and Sunday the gymnasium is proposed to remain open from, 7:30 hrs to 17:30 hrs. On working days the timings need to be decided in, a timing of 6:30 to 8:30 in the morning and 16:00 to 19:00 in the evening, appears to be convenient., , Page 9, , https://abdullahsurati.github.io/bscit, , 343
Page 349 :
344, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Methodology, , clubbed with the civil works., For purchase of the equipment, it is intended to buy these on single tender basis, from Gold’s Gym who are the leading manufacturers of gymnasium equipment., , Organization of work elements and time schedule, Given below in Table 1 is the list of activities and the expected durations for each., The detailed Gantt chart shall be worked out after the approval of the proposal., The expected completion time after paralleling of activities has been worked out, to be about six months from the date of commencement of work., TABLE 1: List of Activities and Expected Durations, , ACTIVITY, Getting approval for the technical proposal, Nomination of core group, ACTIVITY, Budget approval, , Freezing criteria for co-ordinator selection, Civil contractor survey, Discussions with Gold’s Gym regarding equipment, Tender for civil works, Single tender for equipment, Selection of coordinator, Completion of civil works, Installation of equipment, Tie-ups for Yoga centre, Suggested plan of action for utilization, Page, Page10, 10, https://abdullahsurati.github.io/bscit, , DURATION, 10 days, 5 days, 3 days, DURATION, 5 days, 15 days, 10 days, 10 days, 5 days, 15 days, 10 days, 10 days, 30 days, 25 days, 30 days, 25 days, 90 days, 90 days, 30 days
Page 350 :
https://abdullahsurati.github.io/bscit, , TECHNICAL PROPOSALS, , employees. DLW’s internal cable TV shall be used to promote the gymnasium., to organize weight-lifting and body building competitions for children as well as, for adults to attract interest of DLW’s employees., In association with the DLW hospital, dedicational and physical therapies shall, be worked out for some volunteers. This shall give an impetus to popularizing the, on the lines similar to that of the DLW golf course., It is proposed to have separate timings for family members. This shall ensure, active participation by ladies and children. This experiment has already been, successfully tried out with the swimming pool., , Budget Estimate, Given below in Table 2 is an estimate of cost likely to be incurred in setting up the, gym facilities. The recurring costs shall be additional to this estimate and have, been worked out separately. Also indicated are the expected earnings/support, annually., TABLE 2: Expected Expenditure and Earnings for the Gymnasium, , S no., 1, 2, 3, 4, 5, 6, 7, 1, 2, 3, , Category of Expenditure, One-time cost, Civil Construction, Electrical Works, Equipment, Selection process, Core team expenses, Travel expenses, Misc expenses, Recurring Expenses/Year, Salaries and wages, Maintenance, Contingencies, , Cost in ` million, 9.0, 2.5, 0.5, 3.0, 0.5, 0.5, 0.5, 1.5, 2.2, 0.5, 0.7, 1.0, , Page 11, , https://abdullahsurati.github.io/bscit, , 345
Page 351 :
346, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , 1, 2, , Expected Income/Year, DLW members, Non-DLW members, , 2.0, 0.5, 1.5, , as a gymnasium, the overall health levels of the employees and their families, shall improve. This is supported by the fact that many leading organizations, in the world including Intel, IBM, GE, TATA, and others have successfully tried, and implemented this concept., The Chairman is therefore requested to accord approval to the setting up, of a multifarious gymnasium at DLW., , Page 12, Page 12, , Please refer to the CD for more samples of technical proposal., https://abdullahsurati.github.io/bscit
Page 352 :
https://abdullahsurati.github.io/bscit, , TECHNICAL PROPOSALS, , 347, , SUMMARY, Technical proposals are sales offers to solve a, problem. In writing such proposals, academicians, offer their domain expertise in solving technical, problems; business professionals offer their knowhow to take up some major or minor projects in, order to provide consultancy, training, or innovative, solutions to certain problems that arise in their, organizations or other companies., , Technical proposals are written in formal and, persuasive language and include standard structural elements. An understanding of the purpose,, structure, characteristics, and style of technical proposals will enable us to prepare winning proposals., , EXERCISES, 1. The Technical Writing Department of Bell Educational Supplies and Technologies (BEST) needs, new computer equipment. Currently, the department has outdated hardware, outdated word processing software, an outdated printer, and limited, graphic capabilities., Because of these problems, the company’s user, manuals, reports, and sales brochures are being, poorly reviewed by customers. Further, BEST has, no website for product advertisement and/or, company recognition. All these factors have led, to a decline in profits., As Technical Writing Department Manager, you, have consulted with your five staff members to correct these problems. As a team, you have decided, that the company needs to purchase the following, new equipment:, • Six new personal computers, • Two laser printers, • Word processing software, • Graphics software, • Scanner, Draft a technical proposal to the CEO of BEST, company for the purchase and installation of the, equipment. Invent all the necessary details., 2. As a fresh graduate in engineering you have decided to establish a manufacturing unit in your, hometown. For this purpose, you have decided to, avail yourself of the liberalized loan facility under, the self-employment scheme. Therefore, you wish, to submit an unsolicited technical proposal for, the manufacture of an item of your choice seeking loan from the State Industrial Development, Corporation (SIDC), Jaipur., , Now draft this proposal to be sent to the Director, SIDC, Jaipur, inventing the necessary details., 3. Assume that as Project Development Officer you, have been asked by the National Institute of Computer Education, Futura Building, 24/377 Peetampura , New Delhi-110031, to set up a Communication Technology Centre at Pilani for training, professionals in the use of latest technological aids, for face-to-face and distance communication., Inventing all the required details, write in proper format this technical proposal which is to be, submitted to the Director of the Institute., 4. The Government of Orissa has invited proposals, from Non-Governmental Organizations (NGOs), for setting up small-scale industries in the areas of, electrical goods, motor spare parts, oil-crushing, units, cotton textiles, wool manufacturing, etc.,, for the rehabilitation of the flood-affected people, of the state., Choose an industry of your choice and write a, technical proposal to be submitted to the Director of Industries, Government of Orissa, assuming, yourself to be the Managing Director of a public, limited company. Invent the necessary details., 5. Excel Computer Manufacturing (ECM), a multinational company, wants to improve the existing parking facilities for the four-wheeler and two-wheeler vehicles, of its staff., As the Personnel Manager, ECM, draft a proposal, to be sent to the Secretary, Board of Directors, of, your company for improving the parking facilities., Your proposal should include the following issues:, Area availability, lighting, provision of stands, and roofs, arrangement of security, issue of identity cards, fixing the rent, etc., , https://abdullahsurati.github.io/bscit
Page 353 :
348, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , 6. The Government of India has recently launched, a company to produce personal computers on a, large scale. As Finance Manager of this company, draft a proposal containing all the required details, like space, space-conditioning and dust-proofing,, hardware, peripherals, consumables (like disks,, tapes, ribbons, floppies, etc.), networking, power, supply, technical and other staff, ancillary support, systems, etc. This proposal is to be submitted to, the Secretary, Department of Company Affairs, for, approval., 7. Assume that your organization has been spending about Rs 500,000 per annum on getting its, various documents such as routine forms, brochures, reports, proposals, manuals, etc., printed, by outside agencies. Now, the organization has, decided to have its own publishing unit to cater, to all the above printing needs. As the Office Manager, draft a proposal for the creation of this unit, for the consideration of the Board of Directors of, your organization., 8. As the District Health Officer, Vidisha, Madhya, Pradesh, you have decided to set up a, Rehabilitation-cum-Health-Care Centre in the, district, especially for the benefit of the rural, population of about 200,000. The objective of the, rehabilitation programme is to help persons with, total or partial disability and to enable them to live, with human dignity. The health-care programme, mainly aims at carrying out immunization, programme effectively in addition to developing, awareness about the need for nutrition to fight, the menace of malnutrition and the related, diseases among children. The proposal is to be, submitted to the Director of Health Services,, Madhya Pradesh, Bhopal., Draft this proposal., 9. The Government of Rajasthan has earmarked Rs, 100 million for drought relief work, for the worstaffected district of Jhunjhunu in May 2014. This, money has to be spent on the following:, • Provision of work to labourers on afforestation,, road construction, digging wells, etc., • Distribution of seed, fertilizers, and fodder at, subsidized rates, • Supply of drinking water, • Supply of essential commodities through fair, price shops, , • Free distribution of medicines, • Supply of free lunch to school children, As Collector, Jhunjhunu, draft a proposal to be, sent to the Secretary, Home Department, Government of Rajasthan, Jaipur, containing the details, of how you propose to proceed with the relief, work under the various categories mentioned, above., 10. The Northill University, Guwahati, wishes to revise and revamp its curriculum in business. As, the Research Associate in the Bureau of Business Research, Shillong, you have been asked to, study the data collected from business executives, and business leaders regarding the strengths, and weaknesses of the graduates’ knowledge of, business and business skills. The table given below contains the tabulated responses of 1000 respondents., Respondents’ Views on the Importance of Subject Areas in Business (in per cent):, , Courses, , Very, UnimporImporimportant, tant, tant, , Accounting, , 88.2, , 11.8, , 0.0, , Business, Policy, , 81.5, , 14.0, , 4.5, , Business, Communication, , 91.7, , 8.3, , 0.0, , Management, , 68.5, , 22.7, , 8.8, , Management, Information, System, , 59.8, , 32.8, , 7.4, , Marketing, , 80.7, , 19.3, , 0.0, , Organizational, Behaviour, 62.0, , 33.7, , 4.3, , Personnel, Management, , 11.8, , 37.7, , 50.5, , Strategic, Planning, , 39.6, , 51.7, , 8.7, , Ratings, , As the Research Associate of this Bureau, draft, a technical proposal to be sent to the Registrar,, Northill University, Guwahati. Invent the necessary, details and use the statistics given in the table, , https://abdullahsurati.github.io/bscit
Page 354 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 15, , OBJECTIVES, You should read this, chapter to know, , • the various written modes, of communication, , • the seven C’s of written, communication, , • the purpose, significance,, , and structure of memos,, letters, and emails and how, they differ, • how to write various kinds, of business letters, • the classification of memos, • the advantages and, limitations of email, • about email etiquette,, effectiveness, and security, , Formal Letters, Memos,, and Email, INTRODUCTION, Having studied and understood the basics of writing skills through, the preceding chapters in this part of the book, let us now look at their, applications in the various modes of formal written communication., These forms are used extensively in the daily communication activities, of any organization. Formal written communication includes business, interactions in the form of memoranda (memos), letters, emails,, reports, manuals, bulletins, etc. In present day workplaces, the transfer, of information on paper has been substantially replaced by electronic, communication. However, the value of well-written messages remains, unchanged. Effective letter writing requires a strong command over, language, knowledge of the various popular formats, coherent thoughts,, and a good choice of words., Any document has to be designed with respect to the target audience., It is essential to be precise and concise. Often the reader may be interested, only in the key information being conveyed rather than the details., Hence, avoid peripheral details and directly address the issue., In some instances, a conversational style may be preferred over a, formal style. However, while very formal writing may alienate the, readers, an extremely informal approach may appear very casual and, unprofessional. Therefore, it is important to strike a balance in the, writing style, keeping in mind the audience being addressed. One, should always be aware of the purpose of writing and never compromise, on the content. Often written documents serve as the first point of, contact, and hence are crucial in creating the first impression., In this chapter, we will learn the characteristics and principles of, formal correspondence, as also understand the various formats and, types through numerous examples., , Formats of Written Correspondence, Organizations usually have a set format for memos and letters, and, hence each organization has its own established pattern of written, https://abdullahsurati.github.io/bscit
Page 355 :
350, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , communication. However, the current approach of communication through emails has become, more informal. The traditional formats of letters will be discussed later in the chapter., There are similarities as well as differences in the structure of letters, memos, and emails., A memo consists of a To, From, Subject, and Date approach, which makes interoffice, communication easier. Since it has recommendation towards the end, it quickly gives the action, plan. Letters are longer and more formal than emails and memos. While memos and emails, can be as short as two lines, the length of emails should not exceed what can fit one screen., Further, a letter is generally addressed to one person, while memos and emails address a group, of individuals. Also, emails can have additional attachments such as pictures, scanned images,, documents, and audio/video clips., Of the three formats we are discussing here, letters are the most formal. Before selecting, the mode of communication, one has to consider several factors, including the purpose of, writing, the role of the receiver, the urgency of the information being conveyed, and the, expected impact., , Types of Messages, A message can be written for different purposes. It can be congratulatory, for cancellation of a, ticket, for accepting an invitation, for breaking bad news, or informatory. We will discuss the four, broad types of messages here: general message, positive news, bad news, and negative message., , General message, Any message being conveyed has to be formulated very clearly. It is always better to have a direct, approach of communicating the information rather than using buffer statements or beating, around the bush. For example, ‘All the employees of the institute are invited to gather in the, community hall for high tea and an entertainment programme on the eve of New Year 2011’., A general message can be anything from birthday celebration, apology message, congratulatory, message, etc., Positive news, Positive news is mainly written to reassure or convey constructive information. It portrays, the positive aspect of an issue, and helps in playing down the negative elements. Such, communication helps develop a good relationship between the sender and the recipient. The, following guidelines will help organize the elements of positive news:, •, •, •, •, •, , Summarize the main points of the news, Provide details, clarification, and background, Present negative elements, if any, as positively as possible, between the positive elements, Highlight the benefits, Be courteous and use goodwill ending, , A positive message can be a transmittal, confirmation, summary, or clarification. Like for a, general message, while drafting a positive message, it will serve well to be aware of the purpose,, the recipient, the contents to be included, the benefit to the readers, and the response anticipated., , Bad news, Though inevitable, we all try to avoid breaking bad news. Since it must be done, a few things one, can do to lighten the effect are as follows. Begin a negative message with a buffer statement. Then, https://abdullahsurati.github.io/bscit
Page 356 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 351, , state the bad news along with proof and always conclude on an upbeat and positive note, may be, including a possible solution to the situation. A neutral opening, followed with by a brief reminder, of the positive aspects of the relationship in the past might constitute an encouraging beginning., Then address the bad experiences and the problems faced, the possible reasons, if appropriate, and, end by expressing desire to continue the good relationship., See the example below:, Dear Mr Grover,, Our organization has used your taxi service for a very long time and had a very satisfactory, experience in the past. We have not faced any problems earlier. However, this time when our, employee, Mr Ashok Behl, who was to be picked up from the airport, came out of the terminal,, the driver was nowhere to be seen. When Mr Behl tried to contact the driver, his phone was, at all apologetic. Our employee was put through great inconvenience because of this delay., Since we have been your customers for the last 10 years, we do not expect poor services from, behind such reluctant attitude., We hope that this problem can be quickly addressed to ensure that our future dealings with, you are hassle free., Regards,, Sameer, , Use neutral terms as far as possible when conveying a message. Avoid severe words such, as terrible, bad, regret, unfortunate, and cannot. Always allow the recipient an opportunity to, express their views so that the communication does not end abruptly., , Negative message, It is never too difficult to deliver positive or neutral messages, but a negative message needs to, be considered well and worded carefully. Although it is a difficult task, the sooner it is delivered,, the better. One may have to adopt a direct or an indirect approach depending on the situation., For example, if a researcher has applied for funds for a project to an agency and the agency is, not granting the fund, the agency is expected to inform the candidate about the same at the, earliest and in clear words. Often, conveying a negative message to a known person needs to, be handled much more delicately and carefully than conveying the same to a stranger. The, following points might help drafting a negative message:, • Approach the issue directly rather than covering up., • Be gentle in delivery. Use of passive voice may sometimes work better. Be tactful and do, not dwell too long on the negative information., • Provide adequate reasons without sounding apologetic., • Conclude on a positive note., • Be sincere in approach., • Allow the recipients an opportunity to express their views. Do not end the communication, abruptly., https://abdullahsurati.github.io/bscit
Page 357 :
352, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , LETTER WRITING, It is important for professionals to be educated on the functional importance of effective, writing. In letter writing, precision and clarity of meaning are extremely important. Time is a, valuable resource, and precise communication helps save the time of the writer as well as of the, recipient. People who value time and communication are bound to gain out of their effective, communication skills., Further, the reader creates an image of the writer or the organization, 'Letter writing is the only, through their letters. A good letter should make for effortless reading. It, device for combining, should be clear and concise, with short sentences and simple words. It, solitude with good, should keep to the facts and be easy to read and understand., company.', The following sections will take us through the various characteristics, –Lord Byron, and components of professional letters., , The Seven Cs of Letter Writing, To write an effective letter, one needs to understand the purpose of writing and then draft the, letter, focussing on the reader’s perspective. Formal letters should be clear, courteous, firm, and, as friendly as the topic allows. The best letters have a conversational tone and read as if the, reader is being spoken to. The following are the seven Cs of letter writing:, •, •, •, •, , Clarity, Conciseness, Correctness, Courtesy, , • Cordiality, • Conviction, • Completeness, , While writing a letter, we usually try to convince our readers or derive a positive reaction from, them. The readers will respond quickly only if the meaning is crystal clear and conveyed well., We need not attempt to present ourselves or our organization as perfect and flawless. Instead,, by taking a stance and accepting responsibility, we may create a more reliable impression., , Significance, Any organization will have to correspond in writing with its customers, branches, suppliers,, bankers, and other vendors with whom it has or would like to have a lasting professional, relationship., There have been enormous changes in communication patterns in the past decade. However,, traditional formal letters still retain their importance for the following reasons:, • Just as personal letters help maintain personal relationship with friends and relatives, formal, letters assist in sustaining relationships with other organizations, clients, and vendors., • They are the appropriate forms of communication when the information to be conveyed, is complex., • They serve as permanent records and are a valuable repository of information, which can, be referred to in future., • They help reach out to a large and geographically diverse audience economically., , Purpose, Although each individual letter has a unique message, the ultimate purpose of writing any, formal letter is to sustain existing business relationships or to create and establish new business, https://abdullahsurati.github.io/bscit
Page 358 : https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 353, , relationships. For example, when we apply for a job, we offer our services to the prospective, employer. Similarly, when the purchase manager of a company writes a letter complaining, about a damaged consignment, his/her aim is not only to bring the flaw to the notice of the, recipient but also to request for corrective action. Formal letters therefore are written for varied, purposes as mentioned below:, •, •, •, •, •, , To inform, To enquire, To request, To complain, To sell a product, service, or scheme, , • To congratulate, • To order, • To collect dues, • To make an adjustment, • To apply for a job, , Structure, Unlike personal letters, formal letters have a distinct structure and layout. One needs to be, familiar with not only the different elements or parts of a letter but also their positioning in the, letter and the purpose for which they are included in the letter. Several of these elements appear, in all letters, while others appear only when desirable or appropriate., , Standard elements, Heading Also known as the letterhead, the heading shows the organization’s name, full, address, and telephone numbers. If a separate letterhead is not provided, the heading includes, the sender’s address. Letterheads have the potential to create a favourable impression and, hence need to be designed with thought and imagination. The colour and quality of paper,, the size of the letterhead, the type of fonts that are used, and the spacing are factors to be, carefully considered. Many companies even seek the help of advertising agencies to design their, letterheads. A sample letterhead is shown here:, , Hi Tech Graphics, 613, Circular Road, Bangalore-560001, Serving your needs since 1990, Phone: (080) 2335618 Fax: (080) 2335710 Email:
[email protected], , Whenever a letterhead paper is not used, the sender’s address is either aligned with the left, margin or centre-aligned, depending on the layout of the letter. For example, the same heading, given above can be displayed as follows:, Hi Tech Graphics, 613, Circular Road, Bangalore-560001, Phone: (080) 2335618, Fax: (080) 2335710, Email:
[email protected], , https://abdullahsurati.github.io/bscit, , Block layout
Page 359 :
354, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , Dateline This component refers to the date on which the letter was written. It includes the, date, month, and year. It can be represented in either of the following two ways:, 3 January 2015 or January 3, 2015, The former represents the British style and the latter is in American style. Some companies, may use their in-house style. However, the British style is gradually giving way to the American, style throughout the corporate world. For international correspondence, the accepted format for, the recipient’s region has to be checked first. Ordinals (e.g., 3rd, 7th, etc.) are normally not used, to indicate datelines. The month should preferably be spelt out to avoid confusion with the date., Inside address This part of the letter identifies the recipient of the letter and is separated, from the date by at least one blank line. The amount of space separating the inside address from, the date may also be adjusted to suit the length of the letter. A courtesy title should precede the, recipient’s name. Table C1 in the CD shows the appropriate titles that can be used., It is always best to address the letter to a specific person. The name of the person can usually, be obtained by checking the organization’s website or by telephoning the organization. If we do, not know the name of a specific person, it is acceptable to address the letter to the department, or to a job title., Immediately following the addressee’s name and title, separate lines should contain the, name of the company, the street address or post office box number, and the city and state or, province with proper postal code or zip code. When writing internationally, the addressee’s, country should follow in capital letters and occupy the last line of the inside address. Here are, a few samples of inside addresses:, Ms Christina George, , The General Manager, , Corporate Communications Inc., , Lion Industries Limited, , 3456 Grant, , No. 3-A, East Patel Nagar, , Chicago, IL 60611, , Manasarovar, , USA, , Mumbai-400001, , Messers Lal Chand and Sons, , Professor (Ms) Gayathri Devi, , 56, Nehru Marg, , Department of Chemistry, , Greater Kailash, , Indian Institute of Pharmacy, , New Delhi-110002, , Patel Colony, Secunderabad-500017, , Salutation Always try to address the letter to a person by name rather than by title. If a, specific name is not available, a salutation such as the following may be chosen:, Dear Committee Member, , Dear Students, , Dear Colleagues, , To All Sales Reps, , To Whom It May Concern, , Dear Sir or Madam, , https://abdullahsurati.github.io/bscit
Page 360 :
https://abdullahsurati.github.io/bscit, , Dear Madam or Sir, , FORMAL LETTERS, MEMOS, AND EMAIL, , 355, , Dear Purchasing Agent, , If your letter is addressed to a company with men and women employees, the proper, salutation is:, Gentlemen and Ladies, , Ladies and Gentlemen, , If your letter is addressed to an organization of only women or only men, use:, Dear Sirs, , Dear Ladies, , Dear Mesdames, , Gentlemen, , Ladies, , If we do not know the gender of the person to whom we are writing, one of the following, representations may be used:, Dear Mallika Pande, , Dear M. Pande, , The way we address a recipient is governed by our relationship with that person. Whether, we use the first or the last name and whether we drop the Dear makes the letter either more, formal or less formal:, Dear Mr Gupta:, , (most formal), , Dear Ashok:, Ashok,, , (very informal), , Current day corporate letters/emails use ‘Hi’ or ‘Hello’ to address people. Use of the first, name to address someone is a common practice in the US and UK. How a person signs off is, usually a safe indicator of how to address them. Surnames are seldom used. If a person signs, off a letter as ‘Thanks and regards, Sir Jeffrey Gallus’, we should be addressing that person as, ‘Dear Sir Jeffrey Gallus’. However, if the same person signs off as Jeff, ‘Hi Jeff ’ would be a more, appropriate way of addressing him., Message This is the main content of the letter and usually occupies the maximum amount, of space. It should be single-spaced, with a blank line separating it from the preceding and, the following parts of the letter. In addition, each paragraph of the message should also be, separated by a blank line., The main text of the letter can be formatted to make it convenient for the reader to gather, information quickly and easily. For example, bulleted lists, italics, and bold fonts can be used to, organize the content and emphasize where required. However, while doing so one must adhere, to the style of writing practised within the organization., Complimentary close This element is a single word or phrase, separated from the message by, a blank line. Here is a list of expressions that can be used for complimentary closing:, Sincerely, Cordially, Truly, Faithfully, Faithfully yours, Cordially yours, Truly yours, Sincerely yours, Yours sincerely, Yours, truly, Yours obediently, Yours faithfully, , Of these expressions, the single-word expressions are more contemporary and may suit, almost any formal letter. The choice of close provides a way to create just the desired tone., Closings such as, Sincerely yours, Truly yours, Very truly yours, etc. seem outdated. Sincerely and, Cordially are widely accepted closings. Thanks and regards, Warm regards, Best regards, Cheers!,, Best, etc. are the more common closings used currently., https://abdullahsurati.github.io/bscit
Page 361 :
356, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Signature block The complimentary closing line is followed by the signature block, which, includes the writer’s signature, name, and title. Every letter must end with a signature to give, authenticity to the information contained in it. An unsigned letter is of no consequence. The, signature block is placed four lines below the complimentary close. It includes the sender’s, name and title. If your name might leave the reader in doubt about your gender, you may, include a title in the signature block as shown in the sample given below:, Cordially,, Ms Santosh Singh, Senior Executive, , The letterhead indicates that the writer represents the organization. However, if the letter is, on plain paper or runs onto a second page, we should emphasize that we are writing legally for, the company. The accepted way of doing so is to place the company’s name in capital letters a, double space below the complimentary close and include the sender’s name and title four lines, below that., , If an organization has delegated the authority of signing letters to an executive by the, Power of Attorney, that executive will add per pro. or pp. (indicating that the letter is signed on, someone else’s behalf ) just before the name of the organization and sign below it as follows:, Cordially,, Per Pro. Sharewell Industries, Lakshmi Deshpande, , Additional elements, Formal letters differ considerably from each other in their subject matter, the identifying, information they need (such as addressee notation, attention line, subject line, or reference, line), and also the format they adopt. The following elements may be used in any combination,, depending upon the requirements of the particular letter, but generally in the order given here:, •, •, •, •, , Addressee notation, Subject line, Enclosure notation, Mailing notation, , • Attention line, • Reference initials, • Copy notation, • Postscript, , Addressee notation This notation generally appears a double space above the inside, address, in all capital letters. PERSONAL, CONFIDENTIAL, PLEASE FORWARD, and, THROUGH PROPER CHANNEL are examples of such notations that are used in letters, that have a restricted readership or that must be handled in a special way., https://abdullahsurati.github.io/bscit
Page 362 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 357, , Attention line An attention line is used when the inside address does not include the name, of an individual. It can be used to draw the attention of a particular person or a particular, department in an organization so as to ensure a quick and prompt action in response to the, letter. The attention line may be placed two spaces below the inside address. It is generally given, in bold as well as capital letters, and is included in the following manner:, ATTENTION: DR SATISH YADAV, PRODUCTION UNIT, ATTENTION: PERSONNEL MANAGER, , Subject line This element lets the recipient know at a glance what the letter is about; it also, indicates where to file the letter for future reference. It usually appears below the salutation. But, sometimes it is placed above the salutation and below the attention line:, Dear Mr Gupta:, SUBJECT: INFORMATION REGARDING LAST WEEK’S INSPECTION, or, ATTENTION: PERSONNEL MANAGER, SUBJECT: INFORMATION REGARDING LAST WEEK’S INSPECTION, Dear Mr Gupta:, The subject line is also generally given in bold as well as capital letters., Reference initials Often, one person may dictate or write the letter and another may produce, it. On such occasions, reference initials are included to show who helped prepare the letter., Reference initials appear two spaces below the last line of the signature block. While the writer’s, name appears in the signature block, only the initials of the preparer are necessary. If only the, department’s name appears in the signature block, both sets of initials should appear, usually in, one of the following forms:, Ksm/rk, Ksm:rk, KSM:RK, , The first set of initials is the writer’s and the second set is the helper’s. At times, the letter, may be written, signed, and prepared by different persons. In such cases, at least the file copy, of a letter should bear all the three sets of initials (KSM/AS/rk: signer, writer, preparer). When, people key in their own letters, reference initials are not included. With the increased use of, electronic mails, the use of reference initials has become obsolete., Reference line Formal letters often carry a reference line, which is used for sequential, correspondence with the recipient. The reference line consists of an alphanumeric reference, number, which uniquely identifies the letter. An official reply to such a letter usually quotes, this reference number, as follows: ‘With reference to your letter, Ref. no. ABCD/03/07, …’ or, ‘Further to your letter, Ref. no. ABCD/03/07, dated 10 January 2015…’. Reference numbers are, also used to keep a record of letters sent or received. There can be several methods of inserting, reference numbers in formal letters. Some examples are as follows:, By serial number: This method uses a running number for all letters generated., By department and serial number: This method uses the originating department’s initials, followed by a serial number., By project ID and serial number: This method includes the project ID, which could be initials, unique to the name of the project, followed by the date of the letter or the serial number., There are no standard methods for inserting reference numbers except probably in, government letters. In other companies, the method to be used is normally decided internally, by the concerned department. Generally, the reference line appears below the dateline., https://abdullahsurati.github.io/bscit
Page 363 :
358, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Enclosure notation This notation appears at the bottom of the letter, one or two lines below, the reference initials. Some common forms are:, Enclosure: Draft of proposal, Encl.: Draft of proposal, Enclosures:, 1. Report (10 pages), , 2. Photographs (2), , 3. List of participants, , Copy notation This is an optional component. It indicates who is receiving a courtesy copy, (cc). Some companies indicate copies made on a photocopier (pc), or they simply use copy (c)., Recipients are listed in the order of rank if they hold different ranks or in alphabetical order if, they hold equal ranks. This part follows reference initials or enclosure notations:, Cc: Charles Mathew, Pc: Leela Sampson, Copy to Ben Adams, C: Rahul Bhatia, , In addition to the name of an individual, copy notation may include any combination of, that person’s courtesy title, position, department, company, and complete address, along with, notations about any enclosures being sent with the copies., Cc: Charles Mathew, with the list of absentees and with a request to look into the matter., , At times, copies are sent to benefit readers other than the person who receives the original, letter or courtesy copy, without the knowledge of these recipients. In that case, the notation bc,, bcc, or bpc (blind copy, blind courtesy copy, or blind photocopy) is placed where the copy notation, would normally appear, but only on the blind copy, not on the original., , Mailing notation This is placed either at the bottom of the letter after reference initials or, enclosure notations, or at the top of the letter above the inside address on the left-hand side., Mailing notations such as BY REGISTERED POST, BY COURIER, BY SPEED POST,, etc. will generally appear in capital letters to catch the attention. In addition, the same notation, will also appear on the envelope., Postscript Letters may also bear postscripts, i.e., afterthoughts to the letter, to the messages, that require emphasis, or personal notes. A postscript is usually the last item on any letter and, may be preceded by P.S., PS, or nothing at all. It can also be shown as a second afterthought, with the notation P.P.S., meaning post postscript., As far as possible, try to avoid using postscripts as they convey an impression of poor planning., However, they can be used in sales letters, not as an afterthought but as a punch line to remind, the reader of a benefit of taking advantage of the offer. Exhibit 15.1 shows both standard and, additional elements., , Layout, Suitable and correct layout enhances the overall effectiveness of any letter. The layout helps to, arrange all the elements of a formal letter in an organized manner. Although the basic parts, of a letter have remained the same for centuries, the layouts have changed to quite an extent., Sometimes an organization adopts a certain format as its policy; sometimes the individual, letter writer is allowed to choose the format most appropriate for a given letter or to settle on a, personal preference. In general, two major letter layouts are widely used., https://abdullahsurati.github.io/bscit
Page 364 :
https://abdullahsurati.github.io/bscit, , EXHIBIT 15.1, , FORMAL LETTERS, MEMOS, AND EMAIL, , 359, , Formal letter with standard and additional elements, , • Block layout (complete block layout), • Modified block layout, , Business or official letters use either mixed or open punctuation. In the former style, which, is most popularly used, a colon is used with the salutation (informal letters use a comma here), and a comma is used with the complimentary close. In the latter style, no punctuation is used, https://abdullahsurati.github.io/bscit
Page 365 :
360, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , with the salutation and the complimentary close. Some organizations prefer to omit both the, salutation and complimentary close. However, this format is rarely used., , Block layout, The block layout, also known as the complete block layout (Exhibit 15.2), is extremely popular, as it makes the letter look attractive, elegant, and efficient. The main characteristic of this layout, is that all elements except the letterhead heading are aligned to the left margin., , EXHIBIT 15.2, , Block layout, , https://abdullahsurati.github.io/bscit
Page 366 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 361, , Modified block layout, The modified block format (Exhibit 15.3) differs from the block format in the positioning of, certain elements: the heading is centre aligned whereas the dateline, complimentary close, and, signature block are right-aligned., Although organizations seem to prefer the full block format, the modified block is also, acceptable. The modified block’s appearance is often considered to be more balanced and, traditional., , EXHIBIT 15.3, , Modified block layout, , https://abdullahsurati.github.io/bscit
Page 367 :
362, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Principles, Read the following message contained in a business letter., Dear Sir,, , It is so unfortunate for me to write this complaint letter to you. I wonder why you had been so careless in, sending me five sets of the books on ‘Technical Communication’ by Raghav Mimani. Don’t you know I had, asked for ‘Business Communication’ by the same author? Are you out of your senses? Don’t you know I have my, comprehensive exam of business communication tomorrow? What if I fail? You will be responsible for it. I am, fuming with anger. I will never ask you for anything in future if you keep doing this. Just check out your records, and give my money back immediately., Your angry customer,, Shantanu, , How do you find this letter? If you are the recipient of this letter, how would, you receive it? Will you react positively to the complaint? Most probably, you, will not feel like responding. Even though you will respond to the complaint,, you may also decide to end your relationship with this customer., As we know, formal letters are written mainly to create, establish, or, sustain business relationships. A good relationship is based on respect, and courtesy. Hence, when trying to establish good relationships through formal messages,, remember the following principles of formal letter writing:, , In the midst of joy do not, promise to give a man, anything, in the midst of, great anger do not answer a, man’s letter., , • Use the ‘you’ attitude, • Be clear and concise, • Be correct and complete, , • Emphasize the positive, • Be courteous and considerate, , ‘You’ attitude, Focus on the recipient’s needs, purposes, or interests instead of our own. Even if we have to talk, about ourselves in a formal letter a great deal, we should do so in a way that relates our concerns, to those of the recipient. This recipient-oriented style is often called the ‘you’ attitude. It does, not mean using the word ‘you’ more often, but making the recipient the main focus of the letter., Even an unpleasant situation can be changed by using the ‘you’ attitude., At the simplest level, one can adopt the ‘you’ attitude by replacing the terms that refer to, oneself and the company with terms that refer to the audience. In other words, use more of you, and yours instead of I, me, mine, we, us, our, and ours. Table 15.1 gives some examples., TABLE 15.1 Example of sentences with 'you' attitude, , We/matter-of-fact attitude, , ‘You’ attitude, , We are glad we can now send our tape recorders., , You would be glad to know that your tape recorders are, ready for sale., , We are happy to receive your request for the automatic locks. Thank you for your request for the automatic locks., We regret that the goods did not reach the buyers in time., , We regret that you could not receive your goods in time., , We are pleased to announce our new insurance scheme., , Now you can avail our new insurance scheme., , We offer the printer cartridges in three colours: Black, red, You may choose your printer cartridges from three, and blue., colours: black, red, and blue., https://abdullahsurati.github.io/bscit
Page 368 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 363, , However, there are always exceptions to rules. On some occasions, it may be better to avoid, using you. For instance, when someone makes a mistake, we may want to minimize ill feeling, by referring to the mistake impersonally rather than pointing it out directly. ‘We have a problem’, would work better than ‘you caused a problem’. Look at the examples given in Table 15.2. The, more impersonal, matter-of-fact tone shows greater sensitivity and avoids creating unnecessary, hard feelings in the recipient., TABLE 15.2 Examples of when not to use 'you' attitude, , ‘You’ attitude, You should never use this type of paper for, photocopiers., You have not connected the wires properly., You have not yet sent copies of the 2014–15 Bulletin., You are not supposed to keep the lights switched, on when you leave your hostel room., Your indifferent attitude has caused this problem., You failed to respond to the letter on time., , Impersonal attitude, This type of paper does not work well in photocopiers., The wires have not been connected properly., Copies of the 2014–15 Bulletin are yet to reach us., Lights should be switched off when students leave, their hostel rooms., A little more care could have avoided this problem., The letter was not responded to on time., , Although the you attitude brings in effectiveness in letters, some organizations may have a, tradition of avoiding references to you and I in their technical or formal documents. Instead, they may follow a unique style and restrict the use of personal pronouns in these documents., , Clarity and conciseness, Read the following two versions of the same message included in a formal letter and see which, one conveys the information clearly and succinctly:, Version 1: I am extremely sorry to have to point out to you that we do not have these brands in stock at the, present moment of time., Version 2: These brands are presently out of stock., , The second version is more direct and concise not only because of the use of fewer words but, also due to the absence of redundant expressions that camouflage the meaning., Conciseness means saying what needs to be said in as few words as possible—a required skill, in technical communication. While many writers can get their meanings across to readers, only, skilled ones can do so effectively in a few words., The message must be clear and specific. A cluttered sentence might not only make the message, difficult to understand but also be interpreted in more than one way. By being unambiguous,, we can achieve conciseness as well as clarity. Lack of clarity and conciseness is often because of, the following reasons:, •, •, •, •, , Long, involved sentences, Sentences revealing over-enthusiasm, Verbosity or wordiness, Redundancy or use of low information content (LIC) words, , Please refer to the CD for examples of how to avoid these pitfalls. Further, Table 15.3 gives, examples of some common phrases that can easily be replaced with short, more concise words, or descriptions., https://abdullahsurati.github.io/bscit
Page 369 :
364, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , TABLE 15.3 Concise versions of long phrases, , Phrase, along the lines of, as a matter of fact, at all times, at the present time, at this point in time, because of the fact that, by means of, due to the fact that, for the purpose of, have the ability to, , Concise version, like, in fact, always, now/ currently, now/ currently, because/ since, by, because, for, can/ be able to, , in order to, in spite of the fact that, in the event that, in the final analysis, in the nature of, in the neighbourhood of, until such time as, in the near future, in accordance with, enclosed please find, , to, although/ though, if, finally, like, about, until, soon, according to, enclosed is, , Correctness and Completeness, If an enquiry to a company about the mode of payment for equipment purchased from them, receives a reply such as this: ‘Send your payment by demand draft as soon as possible’, the, customer will obviously be annoyed because the message, • does not give the complete details about the payment, i.e., the name on which the draft, has to be taken and also whether it should be account payee, • does not specify the deadline for sending the draft., , Even if the formal letters are concise and clear, unless they are specific and complete in all, respects, they may not fulfil the desired objective., The term correctness refers to accuracy or precision, and the term completeness refers to, thoroughness or giving all the required details. To be correct and complete, one has to understand, the purpose of the letter and convey it clearly. These qualities can be achieved in letter writing, by following certain guidelines:, •, •, •, •, , Use evaluative and factual words/phrases rather than abstract and general expressions., Use unambiguous words/phrases., Proofread the message for accuracy of spelling and grammar before sending it., Check whether all queries have been answered and all details provided., , In Table 15.4 given below, the italicized words in the original version refer to abstract/, general, ambiguous, and grammatically incorrect words/phrases. They are changed to factual,, unambiguous, and grammatically correct ones in the revised version., TABLE 15.4 Examples of sentences revised for correctness and completeness, , Original, We need a large office space., A number of customers filed their returns today., On July 1, the company will close its doors., This antiquated merchandising strategy is ineffectual in, contemporary business operations., If you have any questions, please feel free to contact us., We are submitting a cheque for the amount of ` 20,000., , Revised, We need at least 10,000 square feet., Ten customers filed their returns today., On July 1, the company will close down., This old sales strategy will not work in today’s, business., If you have any questions, please contact us., We are sending a cheque for ` 20,000., , https://abdullahsurati.github.io/bscit
Page 370 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 365, , The examples given in Table 15.5 show how abstract phrases can be substituted with more, factual ones in order to make writing more correct and concrete., TABLE 15.5 Examples of factual phrases replacing abstract ones, , Abstract, , Factual/evaluative, , leading company, , first among 2000 companies, , substantial discounts, , discount of 20%, , light in weight, , feather light/lightweight, , as soon as possible, , latest by/on or before 2nd August, , sold a good number of books, , sold 25,300 books, , publications, , books/magazines/manuals/bulletins/brochures, , huge area, , 7000 square feet, , many storeys, , four floors, , the majority, , 65%, , excellent attendance record, , 100% attendance record, , Positive approach, A message can be framed in several ways. Much of the difference lies in the meaning of the, words as meant by the writer and understood by the reader. Consider, for example, the following, words of Ernest Hemingway, a renowned American novelist:, Never think that war, no matter how necessary nor how justified, is not a crime., , If you need to understand the author’s opinion of war, you must shift the negative terms never, and not to positive. In doing so, if you omit one, you may arrive at the intended meaning which is:, All war is crime., , Positive words are always best to achieve your goal. Most information, even bad news, conveyed, through official letters has some redeeming feature. However, the audience should be made aware, of this feature. Emphasize the positive side of the message rather than the negative side. Words, that reflect a positive attitude are more acceptable to readers. In addition, the positive side of a, message will also help in offering criticism or advice without offending the receiver. Compare the, differing results obtained from the negative and positive versions of each of the messages given, in Table 15.6., Also avoid words with negative connotations, i.e., try to frame messages with words that will, not offend or hurt the readers. Replace words with the unpleasant connotations with milder, terms or euphemisms (see Table 15.7)., , Courtesy and consideration, Given below is a message received by a candidate a week after submitting an application for a, job:, Your application for the post of Purchase Manager cannot be considered by our company., , Such curt and discourteous responses are not very pleasant to the receiver. It is not possible, for the company to employ every applicant, but being courteous while rejecting an applicant, https://abdullahsurati.github.io/bscit
Page 371 :
366, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , TABLE 15.6 Negative and positive versions of messages, , Negative, , Positive, , We never exchange damaged goods., , You may exchange the purchased goods provided, they are in good condition., , We regret to inform you that we may not be able to For the time being we can serve you on cash basis, grant you request for credit., only., It is impossible to repair your car in two days., , Your car will be ready by Thursday., , We cannot send you the gowns until you tell us what Please check your size and colour preferences in, colour and size you want., the enclosed order form and send to us so that you, receive the gowns., You should have known that the contact lenses cannot The instructions explain why the contact lenses, be washed with tissue, for it is clearly mentioned in the should be washed only with the particular, instructions., solution., TABLE 15.7 Mild replacements for offending words/phrases, , Unpleasant words/phrases, , Mild words/phrases, , elderly, , senior citizen, , second-hand cars, , resale cars, , cheap goods, , inexpensive goods, , toilet paper, , bathroom tissue, , high-calorie food, , high-energy food, , two of them died...., , two of them breathed their last..., , you’re being fired, , you're being let go, , global warming, , global climate change, , servant, , domestic help, , dull, , slow learner, , poor people, , lower income group, , What’s the problem?, , What’s the issue?, , This contains artificial flavour., , This contains 95% natural flavour., , disabled, , differently abled, , bizarre, , unusual, , would convey the message more amicably, and sometimes even help retain the opportunity, to offer employment to a rejected candidate at a later point, if so desired. The same message, framed as mentioned below would have been more positive in its approach, leaving the lines of, communication open., Thank you very much for your application dated ______ for the post of ______________ in our company., , We are sorry that we are not able to offer you this position at present. However, we have noted down your, credentials and have filed your application for future use. Whenever an opportunity arises in future, we shall, consider your application., https://abdullahsurati.github.io/bscit
Page 372 :
https://abdullahsurati.github.io/bscit, , ‘Courtesy is like oil; it, reduces friction.’, , FORMAL LETTERS, MEMOS, AND EMAIL, , 367, , We appreciate your interest in working with us. Our best wishes to you., , Being polite to the readers helps earn their respect and sustain the, relationship with them. A courteously written correspondence shows not, only the writer’s friendly concern but also consideration for the reader’s needs and feelings. This, helps forge a stronger bond between the two individuals., When we meet somebody face to face, courtesy and consideration can be expressed through, non-verbal means. Similarly, the following guidelines will help convey courteousness and, consideration to the recipient while writing a letter:, • Use a conversational tone (be natural), • Avoid dogmatism (do not preach), • Avoid anger (be patient), , Table 15.8 gives an idea of how courtesy and consideration bring in a positive and desirable, change in the style of an official letter. Sometimes, we may have to offer more explanation while, being courteous, and in this process we may end up with more words. However, although being, concise is important, cutting down on words is not the main objective in writing a letter., TABLE 15.8 Examples of courteous and considerate writing, , Original, , Revised, , Your indifferent attitude has caused a great loss., , Had you been a bit more careful, we could have, avoided this 20% loss., , We cannot grant you the leave you have asked for in As we have to complete the project by the end of, your application of 25 July 2014., this month, you may take leave after 30 July 2014., But sorry, at present it may not be possible for us to, grant you leave., If you do not respond to this letter also, we do not We hope that you will certainly respond to this, have any option other than lodging legal proceedings letter at least so that we can avoid taking any legal, against your company., action against your company., , The CD provides more phrases that express courtesy and consideration in formal writing., , Planning a Letter, Writing is serious business as it creates permanent records. As effective letters can accomplish, their objectives effortlessly, they need to be properly planned and prepared. We need to, determine the structure of the letter before we start writing. It is important to remember that by, taking time to plan our letters, we save time in writing and proofreading them. The meticulous, planning of formal letters involves the following four steps:, • Being clear with the purpose, • Knowing the reader, , • Understanding the message to be included, • Deciding whether a response is required, , Clarity of purpose, We need to be clear in our mind about the main goal to be accomplished through our letters., Various purposes for which formal letters are written have been discussed earlier. For instance,, https://abdullahsurati.github.io/bscit
Page 373 :
368, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , if we write a letter to tell potential customers about our product, our purpose will not only be, to inform them but also to persuade them to buy our product., , Audience awareness, Before writing a letter we should ask ourselves, ‘Who am I writing this letter to?’ Are we writing it, to a person known to us or to a new person? This kind of question will enable us to decide the degree, of formality of our letters. Identifying our readers is an important step in our planning process., Deciding the content, Depending on the purpose and the audience, we can decide the details to be included in the, letter. As already mentioned earlier, the seven C’s of effective letter-writing should be kept, in mind while planning the content of our letters. For instance, when we write a letter to an, author to appreciate her book, we may need to start with a brief introduction of ourselves and, then move on to congratulate the author for writing an excellent book. Then few salient points, of the book that had interested us can be mentioned. Finally, we can conclude the letter by, congratulating the author once again., Understanding the need for response, While planning our letters, we should be clear whether we need a reply from our readers, and if so, we should ask: What kind of reply is it? Is it an action to be taken, a policy to be, implemented, an instruction to be followed or some details to be sent? These questions will, enable us to decide the supporting details to be included in our letters., , BUSINESS LETTERS, Business communications, to a large extent, depend on well-written letters. We become part of an, organization by sending to them our job application along with résumé. Once selected, we write, them an acceptance letter. After becoming an integral part of the organization, many business, TABLE 15.9 Business letter types and their objectives, , Types, Credit, Collection, Enquiry, Order placement, Claim, Adjustment, Sales, Fund-raising, Job Application, Covering letter for job application, Thank you/follow-up, Acceptance/rejection, Resignation, Persuasive, , Objectives, To enquire or request for loan, To collect past due accounts, To enquire the status of something; price lists; catalogues, To place an order for products or services, To lodge a complaint and ask for a remedy, To inform how the complaint would be taken care of, To sell a product or service, To request the readers to donate money or time, To apply for an employment, To introduce the applicant, To express courtesy/get updated information, To take up/refuse an offer or assignment, To give up a job without creating an unpleasant situation, To convince someone, , https://abdullahsurati.github.io/bscit
Page 374 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 369, , letters such as instruction, complaint, sales, tender, and collection letters are written on a daily, basis. Some of the important business letters are discussed in this section along with samples., Depending on their purpose, business letters can be classified into various types, as shown, in Table 15.9. The table also lists the purposes of these letters. Among these, order, enquiry and, claim, and adjustment letters are mostly informative. They either ask for information or provide, information for further action. On the other hand, credit, collection, sales, fund-raising, and job, application types of letters are persuasive, as they attempt to persuade or motivate readers toward, a desired action. In the following sections, a few routine types of business letters are discussed., , Credit Letters, Credit means that we pay later for what we buy now. Goods are sold on credit to increase profit,, as it encourages people to buy more. It does have a few disadvantages such as an increased, workload in business in order to keep an extra record of collecting payments. It is also risky as, the debts can increase inordinately. However, it also helps a retailer to stock goods and make, the payment after the sale is over. This acts as an impetus to business. The inconveniences, of separate payments on each purchase are also reduced. The different types of credit letters, include (a) requests for credit, (b) status enquiries, and (c) replies to status enquiries., , Letters requesting for credit, There are two types of letters in this category—request for enhancing credit limit and request, for enhancing the credit period. Exhibit 15.4 is a sample of a letter written to seek credit limit, enhancement., Refer to the CD for a sample of a letter requesting enhancement of credit period., Status enquiry letters, When clients apply for credit, the finance company needs to check upon their credit worthiness, to ensure that it does not incur losses owing to bad debts (credit that is not paid back). While, making enquiries about the financial status of any individual, a polite tone, but formal in, approach, must be used, keeping the following points in mind:, • Seek general information about the applicant, • Assure that the information provided will be kept confidential, • Get the employer’s opinion on the application for the grant of credit within the requested, limit., , Some companies use a proforma to make status enquiries, instead of writing letters. A selfaddressed, postage paid envelope is usually enclosed to encourage timely replies. When the, requested information is received, ensure to acknowledge by writing a suitable letter. Letters, should be marked confidential and addressed to the same person who has replied or to any, other senior officer in the same department (see Exhibit 15.5)., , Replies to status enquiries, When the reply to the status enquiry about the credit of an individual or firm is positive, the, reply is simple and faces no difficulty in writing. However, if the case is uncertain, care needs to, be taken while responding. The reply should convey the message without being rude. Mark the, letter confidential and keep in mind the following points (see Exhibits 15.6 and C2 in the CD):, https://abdullahsurati.github.io/bscit
Page 378 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 373, , • Provide an honest opinion about the facts, • Reflect that the information supplied by you may be found useful, • Remind that the information provided by you must be kept confidential and you are not, responsible for distortions, , Collection Letters, Collection letters can be written by either the individual or the organization when goods are, taken on credit, and the payment due is to be collected (see Exhibits 15.7 and 15.8). Sometimes, , EXHIBIT 15.7, , Initial collection letter (block layout), , https://abdullahsurati.github.io/bscit
Page 380 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 375, , companies offer products on credit basis to create goodwill among their clients. Collection, letters are written to communicate with customers for collecting payment. The letters act as a, reminder for return of the credits that have become overdue. The desired result is an increase, in the company revenues. These letters begin as pleasant, friendly reminders, and become, increasingly stern and demanding in case of unsatisfactory responses., , Letters of Enquiry, An enquiry letter is useful when we need information, advice, names, or directions. However,, avoid asking for too much information or for information that could easily be obtained in some, other way, for example, by a quick search on the Web., Solicited and unsolicited enquiry letters Solicited letters of enquiry (Exhibit 15.9) are, written when a business or agency advertises its products or services. For example, if a software, , EXHIBIT 15.9, , Solicited letter of enquiry (complete block layout), , https://abdullahsurati.github.io/bscit
Page 381 : 376, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , manufacturer advertises a new package developed and it cannot be inspected locally, we can write, a solicited letter to that manufacturer asking specific questions. If information on a technical, subject is required, an enquiry letter to a company involved in that subject may provide the data., In fact, the company may be able to offer much more help than expected, provided the enquiry, letter is written effectively and clearly., A letter of enquiry is unsolicited (Exhibit 15.10) if the recipient has not prompted the, enquiry. For example, if we read an article by an expert, we may have further questions or want, , EXHIBIT 15.10 Unsolicited letter of enquiry (complete block layout), , 249 Ashok Bhawan, BITS, Pilani-333031, 7 September 2014, The Placement Officer, Lokesh Technology Solutions, 12, Barakhambha Road, New Delhi 110 005, Dear Sir, I, Anil Nath, am a 4th year student pursuing BE Mechanical at the Birla, Institute of Technology and Science (BITS), Pilani, which is Asia’s premier, engineering institute., My areas of interest are Power Plant Engineering, Prime Movers & Fluid, Machines, Design of Machine Elements, Production Techniques., I look forward to working in a research group environment, so that I can, contribute actively to the field of my interest. Joining your research group, would be immensely beneficial to me. I am confident that it will give a, positive synergy to our mutual interests., I request you to kindly enlighten me about the job openings in Generation, Next Technology for a Mechanical Engineering Graduate., I assure my full commitment and sincerity in handling any task that will be, assigned to me. Please find my curriculum vitae enclosed with this letter, for your kind reference., I hope to receive a favourable reply soon., Thank You, Yours faithfully, Anil Nath, Mobile: 9887706110, Email:
[email protected], Enclosure: CV, , https://abdullahsurati.github.io/bscit
Page 382 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 377, , Practice 1, Write a letter of enquiry for leather purses, bags, and other goods, asking for all details regarding, variety, quality, colour, price list, etc. for a shop you are opening in a developing node of your city., Use the modified block form for your letter., , more information. We seek help from these people in a slightly different form of enquiry letter., Unsolicited enquiry letters must be constructed more carefully, because recipients of unsolicited, letters of enquiry are not ordinarily prepared to handle such enquiries. Exhibits 15.9 and 15.10, are samples of letters of enquiry (solicited and unsolicited)., Another sample of a solicited letter of enquiry is given in the CD., , Reply to enquiry letters, Letters of enquiry must be replied to promptly to maintain healthy and pleasant business, relationships. If the enquiry is from an established customer, appreciate their effort. If the, enquiry is from a prospective customer, let your reply reflect that you are glad to receive the, enquiry and express the hope that this new relationship will last long. The reply should address, all the points referred to in the letter of enquiry clearly and concisely. The terms of payment, must be stated, if applicable, in the reply, so that there is no room for confusion. Keep the reply, brief and to the point (see Exhibit 15.11). Some more sample replies to enquiry letters are given, in the CD., Letters of quotation, A quotation is similar to a letter of enquiry or is a promise to supply goods on the given terms., It is not obligatory to buy goods for which a quotation is requested and suppliers never quote, the prices for goods that they cannot supply. Therefore the quotation must be reasonable., While requesting a quotation, the buyer must also enquire about the additional charges of, transportation and insurance, as it becomes difficult to include them later. Exhibit 15.12 is an, example of a typical quotation letter. Refer to the CD for tender letters, which are another type, of quotation letters, with more examples., , Order Placement Letters, An order is a request for something to be made, supplied, or served. Some companies have, their own printed forms for placing orders. These forms are pre-numbered for easy reference., The printed details ensure that no important information is missed out. However, small-scale, companies do not use printed forms and place orders by writing letters. An order placement, letter should be written very clearly and accurately, including the complete description of the, goods required, quantities, price, catalogue number, delivery requirements, and the terms of, payment as agreed by both the parties. Exhibit 15.13 is a sample of an order placement letter., Refer to the CD for more samples., , Claim Letters, A claim (a formal complaint) or an adjustment request (a claim settlement) is made when a, company’s product or service is not satisfactory. Although a complaint could be lodged over, https://abdullahsurati.github.io/bscit
Page 385 :
Next Page, 380, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , EXHIBIT 15.13, , Order placement letter, , telephone, we may like to document the complaint, as the written word always has a greater, value than the spoken word, and serves as a permanent record for future reference., While we may be understandably upset or dissatisfied, the person (say the Sales Manager of, a firm) who is reading the letter may not have anything to do with the origin of the problem., Hence, a courteous, clear, concise explanation will impress him much more favourably than an, abusive, angry letter. Remember that the objectives of writing a claim letter are:, • To bring the mistake/fault to the notice of the supplying company, • To rectify the mistake either by repair or replacement, https://abdullahsurati.github.io/bscit
Page 386 :
Previous Page, , https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 381, , A complaint letter can be written for any of the following reasons:, • Billing errors, • Damaged goods, • Wrong goods, • Wrong quantity, • Unsatisfactory quality, When we make a complaint, we should remember:, •, •, •, •, , • Goods not matching the sample, • Difference in agreed prices, • Late delivery, • Non-delivery, • Poor service, , To write as soon as the mistake is found, To base the complaint only on facts, To think patiently and not to assume that the supplier is obviously to be blamed, To avoid rudeness, , Here are some guidelines to remember while writing a claim letter (see Exhibit 15.14)., , 1. Provide a reference point, namely, consignment number/invoice number, date, and items, ordered either in the beginning of the message or in the subject line., 2. Explain the problem clearly and give specific details., 3. Briefly explain the inconvenience/difficult situation being faced because of the problem., 4. Appeal to the supplier’s reputation and sense of responsibility and fairness., 5. State clearly as to what action is required or what adjustment is expected from the, supplier., 6. Mention the relevant documents being enclosed with the letter and also your availability, for receiving the corrected consignment., , Companies usually accept the customers’ explanation of what is wrong. So, ethically it is, important to be entirely honest while filing claims. Also be ready to support the claim with, sales receipts, letters, catalogue descriptions, or invoices. Always send copies of the documents,, retaining the originals. Refer to the CD for another sample claim letter., Refer to the CD to learn how to write adjustment letters, which are written in reply to claim, letters., , Sales Letters, Sales letters are the most cost-effective and time-efficient means of marketing products or, services. They are also a form of advertising. However, unlike press and television advertising,, which are meant for everybody, sales letters are targeted at selected types of customers. The, primary objective of any sales letter is to convert its readers into potential customers., Before drafting a sales letter (Exhibit 15.15), one must gain a thorough understanding of the, product or service. If it is a product, we must be aware of the following details:, •, •, •, •, , Appearance, Working, Price, Mode of delivery, , • Manufacturing, • Packaging, • Discount offers, , If it is a service such as an organization offering consultancy, we must understand the, following:, • People involved, • Details of jobs undertaken, , • Duration, • Changes, , https://abdullahsurati.github.io/bscit
Page 387 :
382, , TECHNICAL COMMUNICATION, , EXHIBIT 15.14, , https://abdullahsurati.github.io/bscit, , Claim letter (block layout), , • Terms and conditions, , Besides having a thorough understanding of the product or service, one must also be aware of, the readers’ requirements and their need for our product or service. Gather as much information, as possible about their status (academic/economic/financial), age, interests, emotional concerns,, nationality, and culture., https://abdullahsurati.github.io/bscit
Page 388 :
https://abdullahsurati.github.io/bscit, , EXHIBIT 15.15, , FORMAL LETTERS, MEMOS, AND EMAIL, , 383, , Sales letter (complete block layout), , With the product or service and our prospects in mind, we may then start drafting the, sales letter. As already mentioned, sales letters are effective when they sound like successful, advertisements. In order to make sales letters effective, we should ensure that they accomplish, the following objectives, through the AIDA (attention, interest, desire, action) approach:, • Catch the reader’s attention (A), • Arouse the reader’s interest (I), , https://abdullahsurati.github.io/bscit
Page 389 :
384, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Create a desire in the reader (D), • Motivate the reader to action (A), , Accordingly, sales letters can have three or four paragraphs as follows:, 1. Attention (introductory paragraph), 2. Interest and desire (discussion paragraph), 3. Action (closing paragraph), , When using the AIDA approach in sales letters, begin the letter with an attention-catching, device, generate interest by describing the features of the product, increase the desire for, the product by highlighting the benefits that are most appealing to the reader, and close by, motivating the reader to act upon the letter., , Catching attention, The introductory paragraph of a sales letter tells the readers why we are writing and what, we are writing about. Some unique strategies may help gain the attention of the intended, readers of the sales letter. Gaining attention thus would interest them to read further. The, following devices can be used to grab the attention of the reader, depending on the product, or service involved:, • Question, • Quotation, • Anecdote, • Statistics, • Central selling point, • Appeal, Question or a series of questions This method will make the reader expect an answer. For, example, the following questions can be used by a publisher to lead a reader to become interested, in a CD ROM accompanying a book:, How can I develop my interpersonal skills? How am I going to perform in my interview? Will my performance, satisfy my prospective employer? Do these questions bother you? The CD-ROM accompanying our book has, the answers., , Quotation A quotation gives credibility to the product or service, and hence, readers would, like to know what the product is. See the following example aimed at technical writers:, ‘Reading makes a full man; conference a ready man; and writing an exact man’ —Francis Bacon, , If you want to become exact in your writing approach, use ‘Write Exact’, our new office communication service., , Anecdote Begin the letter with a brief dramatic story. The following example illustrates the, attention-catching opening of a sales letter written to advertise a photocopier:, , I was so upset over what had happened that morning. As soon as I entered my boss’s room, he yelled at me and, I was puzzled. But alas! When I saw the photocopies of the survey report in his hand I had no words to say. They, were so poorly produced that I could not make out anything. At that same moment I decided to replace the, existing office photocopier with a CLEARIMAGE photocopier, which I came across in a client’s firm., , Statistics Provide the statistics of a survey result to the target audience, e.g., a non-government, organization persuading people to pledge eye donation:, , Please do not ever think that you are alone. You will be one among those people who have agreed to donate, their eyes after their death. A recent survey conducted by ‘Drishti’ says that among the 1000 people who have, signed for this noble cause, 20% are above 60 years of age, 30% are in the age group of 50–60 and the remaining, 50% belong to your age group., https://abdullahsurati.github.io/bscit
Page 390 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 385, , Central selling point Emphasize the main benefit of the product to the reader. See the, following example about air conditioners:, You are sure to like such a gift that gives you a cooler and more comfortable home, free from dust, and also a, saving of over 20 per cent in electricity., , Appeal Begin the letter with an appeal to the reader’s emotions and values when offering the, services of tax consultants., There is nothing worse than paying taxes when you do not have to do so., , Building interest, After catching the reader’s attention by using any one or a combination of the devices discussed, earlier, one should move on to build an interest in the reader about the product or service. At, this stage, highlight the product’s key selling point. For example, if we wish to sell a tourist, package offer, mention how relatively inexpensive it is, how many places it would cover, and, what concession it gives for children., Although all these are attractive features, we should focus on that very important feature, that most concerns our prospects and that which distinguishes our product. Hence, concentrate, on the central selling point and build the audience’s interest by highlighting this point. Make, it stand out by using additional effects such as using different fonts, some designs, or a unique, style of writing. For a better understanding of how to build interest among readers, go through, the following extract taken from a sales letter:, Introducing the Sanyo PLC-XU35.XU30.SU30 series of ultra-portable projectors with revolutionary Media Card, Imager (MCI) unit. You no longer have to carry along your laptop as well as your projector to make a presentation., You can convert your computer presentations or any screen data into images and save the images onto the MCI, flash card with up to 1 GB data storage capacity., Just set up the projector, slide in the flash card into the MCI unit attached to the projector and project the, images just like you would do in a normal presentation., Despite being compact and lightweight, these new Sanyo projectors have a full range of input/output, capabilities to be compatible with all latest computer and video sources taking them to the top of their class., Along with proprietary Digital Realized Video Scaling technology and Digital Realized Interpolation technology,, these projectors give video and data images of highest quality. They have such a stylish design that they impress, your audience even before you begin your presentation., , Increasing desire, This is an extension of the previous section. Here, the main benefit of using the product is, mentioned repeatedly by elaborating and expanding. Use of persuasive words and also some, pictures would help in convincing the audience that the product is worth what we are claiming., This main benefit will enthral the audience, motivate them to read further, and lead them, towards the last step of the sales letter., The reader’s desire towards the product may be further enhanced by using the ‘you’ attitude,, action terms (strong verbs such as ‘supports’ instead of ‘is designed to support’), colourful verbs, and adjectives (‘you will be delighted to see your floor sparkle like effulgent diamonds’), and, by talking about price. Support the claim by describing how the product has benefited others., It includes testimonials (praise from satisfied customers) or statistics related to the product’s, performance. Guarantees of exchange or return privileges may be included in this part of the, letter, indicating that we have faith in our product., https://abdullahsurati.github.io/bscit
Page 391 :
386, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Try to anticipate every question the audience may like to ask and answer them in the letter., This part of a sales letter can be written effectively as shown in the following excerpt:, With research having shown that students grasp and learn much more when aided by a projector, your, classrooms definitely deserve the latest Sanyo projectors to create that extra edge that will translate into a big, difference and revolutionize teaching practices in your institute., , Motivating action, The sales letter has now grabbed the attention of the audience, created an interest in them, and, increased the desire to buy. Having accomplished these three objectives, the next stage is to, motivate the reader to act as soon as possible. Although the ultimate objective is to persuade the, reader to buy the product, the letter must at least motivate the reader to ask for a demonstration,, a sample, or at least some more information about the product., The stronger the effort to sell, the stronger will be the drive for action. For example, ‘Order, your washing machine today—while it is on your mind’ might be more effective than ‘Please, send us your order today.’ Before including these words, tell the reader how to go about placing, the order. A few samples are given below:, Fill in your preferences on the enclosed stamped and addressed order form and drop it in the mail box today!, , Call the number 011-25525526 right now and we’ll deliver your washing machine in no time. Order it now, while, you are thinking of Washwell 2010., Just visit our website to place your order for…, , You can also persuade readers by informing them about a trial offer, free sample offer, limited, time or limited quantity offer, and festival or seasonal offers., Mail the enclosed card today and get ready for the festival of lights., Order today be the first to own this prestigious coffee maker., , The sales letter can be concluded by re-emphasizing the basic appeal or the central selling, point. This emphasis would enable the reader to recall the benefits of the product., , Postscript, Although postscript (PS) appears as an afterthought in other letters, it can be used in sales, letters as a part of its design. It can be used to emphasize the central appeal, to motivate the, reader to act, to suggest that the reader pass along the sales message, or to invite the reader’s, attention to other enclosures. See the following samples for the effective use of PS., PS Know someone whose birthday is approaching? Our music CDs make a distinctive gift., , PS Remember! If you feel that Washwell 2010 is not for you, we’ll give you every paisa of your money back. We are, confident that Washwell 2010 will become one of your household essentials., , Instruction letters, Instruction letters serve the purpose of instructing, but in the form of a letter. These letters, are used so that the receiver can keep a record of the instruction conveyed. These letters use a, forceful and authoritative tone. The clarity of thought that comes through these letters helps in, getting the job done efficiently., While writing these letters, information of similar nature should be presented together. The, instructions should be arranged in the order of the most important to the least so that the, reader can act accordingly. If the letter conveys only one instruction, then write the purpose, https://abdullahsurati.github.io/bscit
Page 392 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 387, , of the instruction, giving the details and the action expected. For instance, see the instruction, letter given in Exhibit 15.16 written to the instructors for smooth conduct of examinations., The CD includes another sample instruction letter. Refer to the CD also to learn how to, write pessuasive letters., , COVER LETTERS, A covering letter serves the purpose of creating the necessary background to any submission. It, also indicates the origin of the submission by specifying the authorization for a study or project., Any document in the form of a proposal, a questionnaire, a résumé, or a report should be, accompanied with a covering letter. The receiver decides if he/she should read the accompanied, document right then or later based on the cover letter. Thus, the covering letter offers a first, impression to the reader, and must be written with care., A common example of a covering letter is that accompanying a résumé, together forming a, job application. This type of covering letter should complement the résumé. Since the employer, is inundated with a lot of letters and résumés, the cover letter should be written in such a way, that it impresses the selection panel., Covering letters must be planned and executed well, ensuring that they are to-the-point and, free of typographical and grammatical flaws. However, these days the importance of covering, letters is reducing; sometimes a very brief letter informing the recipient that the document has, been submitted suffices., , Writing the Cover Letter, While writing the cover letter for any document, the following points must be taken into, account:, • The purpose of the document, • The expected response, • The highlights, • A courtesy close, • The benefits drawn, Exhibit 15.17 shows a general cover letter., Refer to the CD for some useful cover letter openers., , Academic and Business Cover Letters, An academic cover letter accompanies the documents written for an academic job, such as a, proposals, questionnaire, reports, or job in a university (Exhibits 15.18 and 15.19), and business, cover letters (refer to the CD for a sample business cover letter) accompany the documents, related to the industry, such as job description, salary statements, reports, etc. The document, submission is incomplete without the cover letters., At the basic level, both the letters serve the same purpose, but they differ in their content., One cannot write the same cover letter for academic and business purposes. In an academic, cover letter, the focus is on education, research, publication, and teaching. Write in simple, and grammatically correct English. While writing a business cover letter, one needs to take, additional care of the format, structure, font, tone, etc., Remember the following points:, • Give complete information, • Be precise, • Be polite, https://abdullahsurati.github.io/bscit
Page 393 :
388, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , EXHIBIT 15.16, , Sample instruction letter, , 25/05/2010, Dear Prof. S. Sharma,, All staff members are requested to take care of the following points during comprehensive examination, with full alertness., A. Question Paper Production :A1. The question papers must be word-processed., A2. Be present in the reprography while copies of the question paper are being made., A3. Collect Original question paper, rota master, etc., A4. Erase the word processed file of the question paper from the hard disc and keep the soft copy with, you in secondary storage form., A5. Confirm that the Rubber Blanket in the Rota machine is cleaned after the work is over and also, collect the Master Copy of the question paper as well as the copies of question paper not properly, produced (if any)., A6. Do not bring question papers outside the reprography room without keeping them inside envelopes., A7. Question paper & other material related to it must be kept under lock & key., B. Invigilation:, Make the following announcements for students necessarily before the start of the exam :, 1 Do not carry your mobile phones along with you. If you have one with you, please keep the same in, switched-off mode on the invigilator’s table., 2 In case of a closed book test, deposit any unwanted slip / paper or any other materials, which may be, of direct / indirect help in the exam., 3 Please keep your id cards on your desk during the exam., 4 Do not involve yourself in any kind of direct / indirect copying or cheating attempt., B1. Check the identity of the student by his/ her identity card/ library card., B2. Take attendance on the prescribed form and tally the total by counting the students present. Draw a, rough sketch showing how the attendance was taken., B3. Do not leave the examination hall unattended at any time., B4. Be vigilant and keep moving most of the time., B5. During invigilation, no other work should be done, for example, correction of answer scripts, reading, a book etc., B6. Keep only one door open for exit during the last half an hour. Further, at least one of the invigilators, should be present at the exit so that no student leaves the room without submitting the answer book., B7. Name, ID No and Section No/ Name of the Instructor on the cover page of the answer book(s) must, be checked before the student leaves the hall., B8. A focused effort has been made to keep those people free, who had supplied the necessary, information in this regard. But, still in case of any ambiguity regarding invigilation duties assigned to you,, please contact Dr. Rajesh Prasad Mishra, In-charge, Test scheduling at phone no. 8456., I expect cooperation from all of you for the smooth functioning of the division., DEAN, INSTRUCTION DIVISION, , https://abdullahsurati.github.io/bscit
Page 394 :
https://abdullahsurati.github.io/bscit, , EXHIBIT 15.17, , FORMAL LETTERS, MEMOS, AND EMAIL, , 389, , General cover letter, , Cover Letters accompanying Résumés, The résumé is always accompanied by a cover letter. If the cover letter is able to catch the, employers’ attention, there are fair chances to get shortlisted for the interview. The following, points will be helpful while drafting a cover letter to accompany a résumé:, • Catch immediate attention of the reader, • Give the reasons for writing. If this is in response to an ad or a recommendation, https://abdullahsurati.github.io/bscit
Page 395 :
390, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Tips for Writing Cover Letter, • A cover letter serves as a sales representative for, the individual., • The cover letter should complement the résumé, • Be specific; avoid a general objective. Know the, pulse of the industry., • If already working, then do not demand the, expected salary, but a make reference of the, current salary., , Exhibit 15.18, , • The cover letter on email is often shorter than, the traditional cover letter., • Aim for flawless writing by checking the spelling, and grammar., , Cover letter for travel grant request (block layout), , 13 September, 2014, The Director, DST, New Delhi, Subject : Request for International travel grant, Dear Sir, Please find attached my application for travel grant for, presenting my paper entitled ‘Enhancing employability through, the application of technology’ in the International Conference on, Technology and Management at IMT Dubai., I look forward to a positive response., Regards, Poonam Singh, Research Scholar, , https://abdullahsurati.github.io/bscit
Page 396 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , EXHIBIT 15.19 Cover letter for establishment of a language lab (block, layout), , 28 October, 2014, Ramya Jayesh, Coordinator ( Marketing), Orell Techno Systems (India) Pvt. Ltd, Bangalore, The Head of the Department, Languages Group, BITS, Pilani 333031, Dear Madam, SUB: Oréll Digital Language Lab (ODLL), Oréll Digital Language Lab or ODLL, in a nutshell, is a professionally engineered, comprehensive and, end-user friendlylanguage learning software brought to you by Oréll Technosystems (India) Pvt Ltd, a, dynamic I.T solutions provider focused on delivering cutting-edge solutions primarily for educational, institutions., We are forwarding herewith our most competitive quote tailored to your specifics along withODLL, product details and optimalsystem requirements for your immediate perusal., You may please refer to the rates in IIT Delhi quotation., Some of our more recent clients:, ·, ·, ·, ·, ·, ·, ·, ·, ·, ·, ·, ·, ·, ·, ·, , I I T, Guwahati, I M T, Ghaziabad, Indian Army, Dehradun, Shrinathji Institute of Technology & Engineering, Udaipur, Biyani Girl’s College, Jaipur, BITS-Pilani (Birla Institute of Science & Technology), UV College, Ganpat University, Gujarat., Amity International Schools, Delhi, Institute of Computer and Communication Technology, Anand., Shankersinh Vaghela Bapu Institute of Technology, Gandhinagar., Truba College of Science & Technology – 2 LABS, Bhopal., Sanjay Ghodawat Institute of Technology, Kolhapur., Sanjeevan Engineering & Technology Institute, Kolhapur., Miraj College of Engineering, Miraj. · Learners Academy, Kota. (Rajasthan), Chinar Public School, Alwar. (Rajasthan), , Kindly visit us at www.orell.in for a detailed review of our range of products, services and clientele/, testimonials., Should you require any further details/clarifications, it would only be our pleasure to oblige at once., Thank you once again and looking forward to a mutually rewarding and long-term association., Yours truly, Ramya Jayesh, Co-ordinator, Marketing, , https://abdullahsurati.github.io/bscit, , 391
Page 397 :
392, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Underscore the key item of the résumé, by including the qualities that you possess, but, which are not mentioned in the résumé, • Close the letter on a positive note, expressing enthusiasm, • Highlight your abilities by stressing on the accomplishments, General considerations, • Be careful about the name and the address, • Know the head of department, • Apply without delay, , Cover letters for résumés are addressed to the individual and not the organization, and hence, knowing the name of the person being addressed creates a better impression. Ensure that the, spelling of the name is correct. Let the letter be specific and brief., •, •, •, •, , Keep the letter short, Express enthusiasm and interest for the positive, Highlight your strengths, Organize the letter in three parts, indicating reference, special qualities and availability, at convenient time., • Start with the central selling point—education or experience—which is going to benefit, the company, • Make your keenness for the specific job obvious, , Please refer to Exhibits 15.20 and 15.21 for some sample cover letters accompanying, résumés. More samples of cover letter are given in the CD., Refer to the CD also to learn about official letters such as demi-official letters, government, letters, and letters to authorities, as well as other formal letters such as letters to the editor,, permission letters, thank you/follow -up letters, acceptance/rejection letters, and resignation, letters., , MEMOS, There are four important channels through which information flows within the various, sections of an organization. Employees can communicate face-to-face, over telephone, through, email, or through an inter-office memorandum, which, in short, is called a memo. Memos (or, memoranda) are written by everyone from junior executives and engineers to Chief Executive, Officers. When you think of a memo, what do you think of? It could be a small piece of paper, with a letterhead that says something like:, ‘From the desk of ...’ or ‘Don’t forget ...’ or ‘Reminders ...’, , The message itself may be very simple—something like:, , ‘Buy more paper clips’ or ‘Meet with President at 2:30’ or ‘We are running, out of storage space’., , While these memos are informative or persuasive, and, may serve their simple purposes, more complex memos are, often needed in an office setting. However, even though, business memos may be more formal and complicated,, the intention in writing one is still the same---to, formally communicate within the organization and keep, a record of this communication. These are brief written, https://abdullahsurati.github.io/bscit
Page 398 :
https://abdullahsurati.github.io/bscit, , EXHIBIT 15.20, , FORMAL LETTERS, MEMOS, AND EMAIL, , Cover letter accompanying a résumé 1, , 249, Ashok Bhawan, BITS, Pilani, Rajasthan – 333031, 25 November 2014, The Manager, Cisco Private Limited, 5th cross, Sebastian Road, Hyderabad, India – 530016, Dear Sir, I was very interested to see your advertisement for a Software Engineer in The Hindu, (20 November 2014). I have been seeking just such an opportunity as this, and I think, my background and your requirements may be a good match. I am very much interested, in working as a Software Engineer in your esteemed organization. I enclose my résumé, as a first step in exploring the possibilities of employment with Cisco Private Limited., I have worked as a project trainee in Satyam Computer Services Limited for the past 6, months. I was involved in developing a graphical user interface for Metadata Management, System. So I have hands-on experience in Java Swing, Java Security, JDBC, and Oracle., As a Software Engineer in your organization, I assure you that I will work hard for the, improvement of your company. Furthermore, I work well with others., I would appreciate your keeping this enquiry confidential. Thank you for your, consideration., Yours faithfully, (Gopinath M.C.), Enclosure: Résumé, , https://abdullahsurati.github.io/bscit, , 393
Page 400 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 395, , communications circulated within an organization. They not only facilitate communication, about various operations, but also play an important role in arriving at some quick decisions., For example, the production manager of a fabrics company can decide which type of fabric, needs to be produced more on the basis of information provided in a memo from the marketing, manager., Memos also help solve problems either by informing the reader about new information, such, as policy changes, price increases, etc., or by persuading the reader to take an action, such as, attend a meeting, use less paper, or change a current production procedure., Inter-office memos enable the flow of infor-mation in all the three types of organizational, communication, namely vertical, horizontal, and diagonal. The President of an organization, can send a memo to the Vice President (vertical), a Vice President of one division can send a, memo to the Vice President of another division (horizontal), or the President can send a memo, to an employee directly without going through the hierarchical set-up inside the organization, (diagonal)., In short, memos help in bridging the communication gap among the various sections of any, organization and also serve as permanent record of information., , Classification and Purpose, No other kind of written communication reaches so many people at so many levels as does a, memo in an organization. The larger the organization and the more levels of authority it has,, the more inefficient phone calls and face-to-face discussions become. A memo is a good way to, reach many people at once. Of course email is nowadays used in most organizations to convey, information in whatever written form you may choose—memo, circular, or notice., A memo is important not only because of its frequency of use and the wide range of subject, matter that can be presented in memo form, but also because it represents a component of, interpersonal communication skills within a work environment. To write effective memos that, will contribute to efficient functioning within the organization, one has to keep in mind the, purpose of writing the memo and the readers’ interest. One also needs to take care of the, organization of information, completeness and tone while writing an effective memo., Depending on their purpose, memos can be classified into three major categories:, • Documentary, , • Congratulatory, , • Disciplinary, , Documentary memos, As the name suggests, these memos are mainly used for conveying information, such as memos, written to a subordinate to remind, to announce, to give instructions, to explain a policy or, procedure, to a peer or superior to make a request or routine recommendation, or to confirm an, agreement. For instance, a memo explaining the new method of maintaining medical records, of employees in an organization, requesting the head of another division to provide additional, manpower for shifting some huge machines, providing some suggestions for improving the, existing billing system—all fall under this category. Short reports also can be submitted in the form, of documentary memos. Such reports are called memo reports. These are discussed in Chapter 13., Congratulatory memos, Memos are also used to give credit to employees of an organization for the outstanding work, they have accomplished. It is appropriate for the Vice Chancellor of a university to send a, https://abdullahsurati.github.io/bscit
Page 401 :
396, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Uses of Memos, 1. To request for action or information. This allows, one to have a written record of the request. As, compared with an oral request, this type of written, request is more difficult for the audience to forget, or ignore., 2. To explain to the reader something that is not, understood. The purpose in this case is to clarify, something to the reader., 3. To announce or to give formal notice to readers,, publicly informing them about new procedures, new, products, or anything that needs to be publicly known., , 4. To confirm the details of a meeting, conversation,, or telephone call. This would enable one to have, a written record of decisions or agreements that, were made., 5. To suggest solutions to business problems, to offer, one’s services or those of the department, or to, bring up new ideas or methods of doing things., 6. To report the details of a project at regular intervals, as a way of helping the organization keep track of, progress and problems, , memo to the faculty members congratulating their outstanding contribution to the field of, research. Similarly, employees can also send their compliments in the form of a memo to their, officers, for the awards or achievements that the latter may have earned., , Disciplinary memos, When employees violate the rules or breach the code of conduct in an organization, they will, be served either with a severe warning or any other punishment as decided by the management., The memo conveying this action is known as a disciplinary memo. For instance, a memo may, be issued to an officer who has accepted a bribe from one of the customers., , Structure and Layout, Standard memos are divided into five main segments to organize information and to help, achieve the writer’s purpose. However, depending on the requirements, we may need to add two, more segments, one for attachments and the other for distribution of copies., •, •, •, •, , Heading, Discussion, Signature, Distribution (optional), , • Opening, • Closing, • Necessary Attachments (optional), , Organizations generally provide printed memo forms to their various divisions, which, contain all the segments mentioned above. A sample template is given in Exhibit 15.22., , Heading, The heading segment follows this general format:, , • Name of the organization and address (Printed Letterhead), • Date:, (Complete and current date), To:, (Designation of the recipient), From:, (Designation of the sender), Subject: (What the memo is about, highlighted in some way), , Since memos are used for communication within the organization, it is enough if the, designations of the sender and the recipient are mentioned against To and From in the layout., https://abdullahsurati.github.io/bscit
Page 402 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 397, , Almost every recipient reads the subject line, which gives a clear idea of the topic discussed in, the memo. The subject line, usually typed in capitals, communicates to the reader(s), the purpose, of the memo. One-word subject lines do not communicate effectively, as in the following flawed, subject line., Subject: SUPERVISORS, , EXHIBIT 15.22, , Memo template, , https://abdullahsurati.github.io/bscit
Page 403 :
398, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Such a subject line gives a vague idea about the contents of the memo, but lacks focus. A, better subject line for this would be:, Subject: SALARY INCREASE FOR SUPERVISORS, , A few more samples of subject lines are given below:, •, •, •, •, •, , PERMISSION TO CHANGE PROCEDURE, REQUEST FOR FOUR MACHINES, DETAILS OF TRAINING PROGRAMME, TERMINATION OF SERVICES, ARRANGEMENTS FOR THE CONFERENCE, , You may find that the topic and the main focus are connected by a preposition in all these, examples. Such a combination works well in all subject lines and clarifies the actual subject, matter of the memo to the reader., , Opening, The purpose of a memo is usually found in the opening paragraphs and is presented in three, parts: the context and problem, the specific assignment or task, and the purpose of the memo., The context is the event, circumstance, or background of the problem being resolved or the, topic handled in the memo. The first paragraph establishes the background. State the problem, or simply the opening of a sentence, such as, ‘In our effort to reduce the absenteeism in our, Division ....’ Include only what your reader needs, but be sure it is clear., In the task statement, the steps taken to help resolve the problem must be mentioned., If the action was requested, the task may be indicated by a sentence opening such as, ‘You, asked that I look at ....’ To explain our intentions, we might say, ‘To determine the best, method of controlling the percentage of absenteeism, I took recourse to three methods ....’, Finally, the purpose statement of a memo gives the reason for writing it and forecasts what is, in the rest of the memo. Make sure that this statement is forthright and explains to the reader, exactly what is in store. For example, we might say: ‘This memo presents a description of the, current situation, some proposed alternatives, and my recommendations.’ If one intends using, headings for the different memo segments, the major headings can be referred to in the forecast, statement to provide a better guide for the reader., Some guidelines for the memo’s opening segment:, • Include only as much information as is needed by the decision makers in the context,, but be convincing in establishing that a real problem exists. Do not ramble on with, insignificant details., • If one has trouble putting the task into words, consider whether you are clear in the, mind about the situation. More planning might be required before writing the memo., • Ensure that the forecast statement divides the subject into topics most significant to the, decision maker., To summarize the opening segment, the memo should start with one or two clear sentences, informing the reader of the need and purpose of the communication. For instance, the, introductory paragraph of a memo from the Manager of the Training Division of a company to, the Vice President of that company may contain the following few lines:, As directed by you in your memo dated 21 July 2014, I analysed the possibilities of offering a three-week training, programme to our supervisors. I am submitting my views on organizing this programme in the lines that follow:, https://abdullahsurati.github.io/bscit
Page 404 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 399, , Generally, when we write a memo requesting somebody to provide something, the memo, may be very short, and hence need not contain a separate introductory paragraph. In this case,, the introduction and discussion would be combined as shown below:, As directed by our President, we are trying to complete the work by tonight. To accelerate the pace of work, I, request you to spare two computers for tonight only., , Discussion, The discussion segment is the part where we develop the arguments that support our ideas., For example, if a memo is being written to a superior who has asked for an analysis of, the feasibility of offering some new services to employees, the details of the analysis can, be explained in this section. If one has to direct a subordinate to conduct a survey on the, effectiveness of the new machines introduced in the division, the specific details regarding, the aspects that need to be examined can be mentioned in this segment. Since very few, readers read every line of the memos they receive, keep the communication brief., The following two examples will show you how the discussion segments of a memo appear:, Example 1, I personally went to the reprography section of our institute and found out that the photocopier is not effective, because of the poor quality of stationery used. The paper used is very thin and hence the impressions of one, side fall on the other., , Example 2, Our committee examined the case and the details are given below:, , 1. Adequate quotations were not received for the purchase of the two machines. We found out that, there are five dealers for the sale of these machines in our locality., 2. The machines were not properly checked as soon as they were received. They were sent to the, production division directly., 3. The Purchase Manager does not have adequate explanations for this casual action., , Closing, After the reader has absorbed all of the information, close with a courteous ending that states, the actions expected from the reader. Always consider how the reader will benefit from the, desired actions and how those actions can be made easier. For example, we might say, ‘I will, be glad to discuss this recommendation with you during our Tuesday trip to Delhi and follow, through on any decisions you make’., A memo can end with some complimentary remarks or directive statements. While a, complimentary close motivates the readers and makes them feel happy, a directive close tells, them what exactly is to be expected or what they have to do next. Here are examples of these, two types of closing statements., Complimentary Close, • If our results continue to improve at this rate, we will attract more students during the coming, years. Congratulations!, , • Please accept my compliments for introducing this new computing system in your Division., • There is no doubt that your conscientious efforts would help us accomplish our task without any, difficulty. Keep it up!, https://abdullahsurati.github.io/bscit
Page 405 :
400, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Hints on the Discussion Segment, 1. Begin with the information that is most important;, i.e., start with the key findings or recommendations., 2. Follow the inverted pyramid pattern of, communication. Start with the most general, information and move to the specific or supporting, facts., , 3. Try to make the text more reader-friendly by, applying boldface type, headings, columns, and, graphics., 4. For easy reading, list the important points or details, rather than writing in paragraphs when possible., 5. Be careful to make lists parallel in grammatical, form., , Directive Close, • I would like to resolve the issue only after hearing from you. Hence, kindly inform me before 25, August 2014., , • To complete your analysis in time, our Finance Manager would provide the necessary data tomorrow,, 23 August 2014. Please bring along with you the registration details of the newly acquired land., , Necessary attachments, Make sure all findings are documented to provide detailed information whenever necessary., This can be achieved by attaching lists, graphs, tables, etc. at the end of the memo. Be sure to, refer to the attachments in the memo and add a notation about what is attached below the, closing, like this:, • Attached: Director’s approval letter, • Attached: Several Complaints about Product, January–June 2014, • Attached: List of absentees on 17 July 2014, , Distribution, This last segment is used to mention the designations of those people to whom a copy of the, memo has been sent. As already said, this segment is not mandatory in a memo. The short form, of complimentary copy, that is, Cc, can also be used instead of the word distribution:, , Distribution:, Assistant Manager, Operations, Supervisor, Manufacturing, Distribution:, All Associate Professors, , Cc: Personnel Manager with a request to circulate among the employees, , Budget Officer, , Assistant Manager, Finance, , Style, Regarding the style of memos, the organization and the individual’s relationship with the, readers suggest the degree of formality or informality that should be adopted in a memo. In, some companies, a formal style is expected; in others, a handwritten note or informality in style, is the rule., https://abdullahsurati.github.io/bscit
Page 406 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 401, , Useful Tips to Prepare Memos, 1. Use the standard format or the one prescribed, by the organization., 2. Include all the necessary segments., 3. State clearly the context and purpose in the, opening segment., 4. Keep in mind your relationship with the recipient, to choose the degree of formality., , 5. Maintain a positive tone., 6. State in the closing segment what action is, expected from the recipient., 7. Use features like highlighting, bold face, etc. to, draw attention., 8. Keep the memo short., , Some bosses—those who believe in the importance of upholding status distinctions—want, memos to sound formal and distant in a way that is appropriate while communicating to a, superior. Others—those who have an open and participative approach to managing—would, prefer the use of first person, contractions, and even sentence fragments to create an informal, and conversational style. While writing a memo, therefore, one may choose the style that, suits the organizational culture, but keep in mind that a friendly tone and courtesy are always, required to suggest an association with the reader., Generally, the tone is kept neutral or positive, but one may occasionally have to issue, complaints or reprimands in memo form. Use caution in negative situations, and be aware, of the effect of the correspondence. If the communication is spiteful, blunt, or too coldly, formal, it might annoy the recipient. Flowery language, excessively technical jargon, or, complicated syntax will make one sound pompous. Therefore, one should aim to sound, cordial, straightforward, and lucid. Develop a relaxed and conversational style without being, too chatty. Projecting an image of consideration creates a greater chance of being viewed as, knowledgeable and competent in carrying out the professional responsibilities., Ensure that a memo is as short and to-the-point as possible. Whether the news is good,, bad, or neutral, address the issue in the opening segment. If the memo is lengthy, provide an, indication of its organization in the opening segment. Exhibits 15.23 and 15.24 illustrate a, memo. The CD contains more samples., , EMAILS, The phenomenally rapid growth of the Internet and its widespread use in business has changed, the way in which organizations communicate. All organizations have Internet access, and most, individuals have a personal email address. Many companies are promoting the use of email for, most—if not all—in-house correspondence, and a great deal of communication with outside, organizations also relies on email., Email stands for electronic mail. These are digital messages that can be sent through an, Internet connection. Email offers some tremendous advantages. It is fast—a message can be, sent to as many people as necessary instantaneously. It is inexpensive, as it saves paper and is, promoted in most organizations as a green initiative. It is convenient and saves time. When, dealing with external agencies, especially important clients, it is the most unobtrusive mode of, communication, as the recipients can read it at their own leisure and pace, and respond after, due reflection., https://abdullahsurati.github.io/bscit
Page 407 :
402, , TECHNICAL COMMUNICATION, , EXHIBIT 15.23, , https://abdullahsurati.github.io/bscit, , Sample memo 1, , When email technology was introduced, it brought in a completely different world in terms, of writing. For one thing, it was very informal, as personal emails did not require strict attention, to grammatical rules. Page design did not exist. People have adopted the informality of email, that had become a standard feature of the genre. However, as emails gradually replaced office, letters and memos of all kinds, a certain amount of formality has been introduced. Governments, and ministries now use emails for their official communication., Email also has its own vocabulary of acronyms. Some of the most common ones are listed, in this chapter. Email combines most of the best—and a few of the worst—characteristics of, the more well known methods of communicating, including postal mail, telephone, and fax., https://abdullahsurati.github.io/bscit
Page 409 :
404, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , You can do several things with email that are difficult or impossible with any other form of, communication. While email is an efficient way to communicate, it is also subject to limitations., In particular, we must realize when email is appropriate and when it is not. For example, when, writing about emotionally charged subjects (or when the person we are writing to may become, angry, defensive, or otherwise upset about a subject, or when we are angry), a face-to-face, conversation is generally more appropriate than email. Similarly, discussing confidential matters, or very complex issues is often better done in other ways than through email., , Advantages and Limitations, Advantages, • It is possible to communicate quickly with anyone through the Internet. Email usually, reaches its destination in a span of minutes or seconds., • It is easy to send messages to more than one recipient simultaneously by just typing in, several email addresses. It also allows one to maintain mailing lists on the computer,, which allows quick distribution to many people. It results in avoiding repetition or, reproduction of text., • Email can be used to access vast pools of information stored on the Internet., • Thousands of email messages can be saved and stored, and one can search message files, electronically., • All or part of an email can be pasted into other computer documents., • Some email services allow access to a printer-friendly version of email messages., • Most email systems have a reply button that enables one to include all or part of the, original message when replying. This feature speeds up replying to messages, as people, spend a lot of time establishing a context for their reply in a phone call or a letter., • Drawings, sounds, video clips, and other computer files can be attached to an email., • Letters, notes, files, data, or reports can all be sent using emails., • One need not worry about interrupting someone when sending an email. The email is, sent and delivered by a computer system communicating with the Internet. Although it, is put into someone’s mailbox, the recipient is not interrupted by the arrival of email., • The received emails can be dealt with at a convenient time in leisure. Also, it does not, have to be written or sent only at a time when the recipient will be available. This is, known as asynchronous communication., • Emails are not anonymous—each message carries the return address of the sender—but, it is possible to write to anyone with an email address. All the messages appear the same, to the person who gets the email. The messages are generally judged on the basis of their, content, not their source., • As in the case of postal mail, emails can be marked with high, medium,, or low priority. The email can also be marked for receiver’s action., ‘What a wonderful thing is, mail, capable of conveying, • The cost to of sending an email is independent of the distance, and in, across continents a warm, many cases, the cost does not even depend on the size of the message., human hand-clasp.’, Most Internet access charges are based on the number of hours one, –Author Unknown, uses the Internet per month, or a flat monthly fee., Limitations, • Email is editable. Email communication is subject to security issues. It is therefore, insecure., https://abdullahsurati.github.io/bscit
Page 410 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 405, , • Email is anonymous. The identity of a message’s author can be completely masked or, lost in just two generations of the message. It might be impossible to be certain as to, where an email originated. Without an identifiable source, any claim based on it cannot, be validated., • Email cannot be retracted. Once the ‘Send’ button is pressed, there is no bringing it back., • Email is not necessarily private. Since messages are passed from one system to another,, and sometimes through several systems or networks, there are many opportunities for, someone to intercept or read email. Many types of computer systems have built-in, protections to stop users from reading others’ email, but it is still possible for a system, administrator to read the email on a system or for someone to bypass the security of a, computer system., • Some email systems can send or receive text files only. Although we can send and receive, images, programs, files produced by word processing programs, or multimedia messages,, some recipients may not be able to properly view the message., • It is possible to forge email. This is not common, but it is possible to forge the address, of the sender. We may want to take steps to confirm the source of some emails that we, receive., • We can receive too much or unwanted email, just like other types of junk mail. Junk, email is called spam. One may have to take active steps to delete the junk mail received, and try to stop it from being sent in the first place., • We may not know about the person with whom we are communicating. The, communication is often all in text and it is possible for us to get an incorrect impression, of the person sending us email. Also, some people misrepresent themselves. One must, be aware of phishing, which can be used for identity threat. Phishing is the process of, attempting to access sensitive information such as usernames and credit card details by, pretending to be trustworthy entity., , Style, Structure, and Content, Email messages are equivalent to brief informal memos used to communicate information or ask, questions. Email messages must be kept brief; ideally, under 200 words. In some circumstances,, such as writing an email report, longer messages will be required. However, in most cases, short, messages are likely to get the point across more clearly and are also more likely to get answered., Few people are interested in reading messages much longer than what fits on their computer, screens. In fact, some people do not read lengthy messages or stop reading after the first few, hundred words., Also exercise caution in terms of the tone used. For example, a message from a junior, employee that addresses the president of a major company using an informal tone in an email, note to a colleague would be inappropriate. In other words, the audience and purpose when, writing email should be considered as carefully as when writing formal letters., Also, just because the medium is electronic, do not assume the messages being sent are, short-lived. Many people archive their email and system administrators can retrieve longdeleted messages. An ill-conceived email may still be available in the archives or deleted mail., Poor spelling and grammar in email messages could lead some readers to question the, writer’s competence. Although problems with spelling and grammar are generally ignored in, forums such as the various Internet Newsgroups (indeed, commenting on these sort of issues is, generally considered bad Internet manners), they are generally frowned upon in schools and, https://abdullahsurati.github.io/bscit
Page 411 :
406, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , industry. Sending an email memo filled with spelling errors to an instructor, client, or supervisor, is ill-advised. Always take the time to consider the effect that the tone, style, grammar, and, spelling of a mail may have on the recipient., As far as the structure of email is concerned, there are three parts: header, message, signature., The header identifies the sender, receiver, people who receive a copy of the mail, the date on, which the mail is sent, and the subject. The message includes the content and the signature block, contains the name of the sender. The senders can also add their address and phone numbers to, the signature block., , Emoticons and acronyms, Emoticons, or emotional icons, are used to compensate for the inability to convey voice inflections,, facial expressions, and bodily gestures in written communication. Some emoticons are better, known as smileys, as they are faces showing different expressions. As they are read from a, monitor screen, emails tend to be a cold and emotionless medium. It is also very easy to offend, people without even knowing that we have. Sarcasm, even meant in good heart, is usually, misinterpreted. That is why emoticons were developed. They allow you to make it clear when, what you are saying is not meant to be taken seriously. Those with a dry sense of humour, for, example, can use ;-) which is a wink and a grin., Some commonly used emoticons and email acronyms are listed in Table 15.10. While there, are no standard definitions for the following emoticons, we have supplied their most usual, meanings. Refer to the CD for common email jargon., TABLE 15.10 Common emoticons and acronyms, , Emotion, , Expression, , :) or :-), , Expresses happiness, sarcasm,, :Q or :-Q, or joke, , Expresses confusion, , :( or :-(, , Expresses unhappiness, , Expresses shock or screaming, , :] or :-] or :D or :-D, , Expresses jovial happiness, , :-s, , Worried, , :[ or :-[, , Expresses, unhappiness, , :)), , Laughing, , :I or :-I, , Expresses indifference, , I-), , Sleep, , :-&, , Sick, , X-(, , Angry, , :/ or :\ or :-/ or :-\, :S or :-S, , Emotion, , despondent, , Indicates undecided,, confused, or skeptical, Expresses incoherence or loss, of words, , :@ or :-@ or, , Expression, , [-(, , Not talking, , 8-X, , Skull, , (:|, , Tired, , =:), , Alien 1, , :-?, , Thinking, , >-), , Alien 2, , =D>, , Applause, , :-L, , Frustrated, , https://abdullahsurati.github.io/bscit, , (Contd)
Page 412 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 407, , TABLE 15.10 (Contd), , Emotion, , Expression, , Emotion, , Expression, , Good luck, , <):), , Cowboy, , Flag, , [-o<, , Praying, , ~o), , Coffee, , :)>-, , Peace, , *-:), , Idea, , %%**==, , Acronyms, , O:), , Expansion, , Acronyms, , Angel, Expansion, , ASAP, , as soon as possible, , AAMOF, , as a matter of fact, , BBFN, , bye bye for now, , BFN, , bye for now, , BTW, , by the way, , BYKT, , but you knew that, , CMIIW, , correct me if I’m wrong, , EOL, , end of lecture, , FAQ, , frequently asked question(s), , FITB, , fill in the blank, , FWIW, , for what it’s worth, , FYI, , for your information, , HTH, , hope this helps, , IAC, , in any case, , IAE, , in any event, , IMCO, , in my considered opinion, , IMHO, , in my humble opinion, , IMNSHO, , in my not so humble opinion, , IMO, , in my opinion, , IOW, , in other words, , LOL, , lots of luck or laughing out MGB, loud, , may God bless, , MHOTY, , my hat’s off to you, , NRN, , no reply necessary, , OIC, , oh, I see, , OTOH, , on the other hand, , ROF, , rolling on the floor, , ROFL, , rolling on the floor laughing, , RSN, , real soon now, , SITD, , still in the dark, , TC, , take care, , TIA, , thanks in advance, , TIC, , tongue in cheek, , TTYL, , talk to you later, , TYVM, , thank you very much, , WYSIWYG, , what you see is what you get, , <G>, , Grinning, , <J>, , Joking, , <L>, , Laughing, , <S>, , Smiling, , <Y>, , Yawning, , Email Etiquette, There are many etiquette guides and many different etiquette rules. Some rules will differ according, to the nature of the business and the corporate culture. Here, we list what we consider as the 24, most important email etiquette rules that apply to nearly all formal communication situations., https://abdullahsurati.github.io/bscit
Page 413 : 408, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Answer swiftly, People send an email because they wish to receive a quick response. If they did not want a quick, response, they would send a letter or a fax. Therefore, each email should be replied to within, at least 24 hours, and preferably within the same working day. If the email is complicated, just, reply saying that the email has been received and that you will get back to them. This will put, the reader’s mind at rest and usually they will then be very patient., Do not overuse reply all, Use Reply All only if you really need your message to be seen by each person who received the, original message., Use templates for frequently used responses, If you often tend to receive the same queries, such as directions to your office or how to subscribe, to your newsletter, save your replies as response templates and paste these into your message when, you need them. You can save your templates in a Word document, or use pre-formatted emails., Even better is a tool such as ReplyMate for Outlook (allows you to use 10 templates for free)., Use proper structure and layout, Since reading from a screen is more difficult than reading from paper, the structure and layout are, very important for email messages. Use short paragraphs and blank lines between each paragraph., When making points, number them or mark each point as separate to keep the overview., Identify yourself and the topic, Where possible, identify yourself on the From: line using your full name rather than just email, address. For example, use ‘Amit Kumar Saxena’
[email protected] rather than just
[email protected]., Recipients are more likely to respond if they can easily identify the sender. In addition, knowing, whom a message is from helps the recipient put the message in context., At the end of the message, include an alternative way to be contacted (i.e. phone number,, FAX, postal address) along with the name. This information can be provided in a signature field, that can be turned off for more personal emails. Providing contact information is especially, important when asking for an answer that is likely to be quite complex. Often, less time is, required to explain something complex over the phone or in person than to type out the message., The information in the subject line should be meaningful to the recipient as well as the, sender. For instance, when sending an email to a company requesting information about a, product, it is better to mention the actual name of the product, e.g., ‘Product A information’,, than to just say ‘Product information’ or the company’s name in the subject., Answer all questions, and pre-empt further questions, An email reply must answer all questions, and pre-empt further questions. If all the questions in, the original email are not answered, it will likely bring further emails regarding the unanswered, questions, which will not only waste the time of the sender and the recipient but also cause, considerable frustration. Moreover, if one is able to pre-empt relevant questions, the reader, will be grateful and impressed with the sender’s efficiency and thoughtfulness. Imagine for, instance that an off campus student sends you (assume that you are a professor of Electronics, https://abdullahsurati.github.io/bscit
Page 414 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 409, , Engineering) an email asking some doubts on a lesson. Instead of just explaining the answer to, the student’s problem, if you mention some other sources that he/she can refer to for further, understanding, the student will definitely appreciate this extra information., , Be concise and to the point, Do not make an email longer than it needs to be. Remember that reading an email is harder, than reading printed communications and a long email can be very discouraging to read., Use proper spelling, grammar, and punctuation, As in all forms of written communication, this is not only important—because improper, spelling, grammar, and punctuation give a bad impression of the individual or the company—, but also essential for conveying the message properly. For example, using u, r, and ur for you, are,, and your respectively is inappropriate for formal messages. Mails with no full stops or commas, are difficult to read and can sometimes even change the meaning of the text. If your program, has a spell checking option, why not use it?, Do not write in CAPITALS, IF YOU WRITE IN CAPITALS IT SEEMS AS IF YOU ARE SHOUTING. This can be, highly annoying and might trigger an unwanted response in the form of a flame mail. Therefore,, try not to send any email text in capitals., Avoid long sentences, Try to keep the sentences to a maximum of 15–20 words. Email is meant to be a quick medium, and requires a kind of writing different from letters., Use active instead of passive voice, Try to use the active voice of a verb wherever possible. For instance, ‘We will process your order, today’ sounds better than ‘Your order will be processed today’. The first sounds more personal,, whereas the latter, especially when used frequently, sounds unnecessarily formal., Keep your language gender-neutral, It is important to be gender-sensitive. Avoid using discriminatory language such as: ‘The user, should add a signature by configuring his email program’. Apart from using he/she, you can, also use the neutral gender: ‘The user should add a signature by configuring the email program’., Maintain coherence, When replying to an email, include the original mail in the reply, Click ‘Reply’, instead of ‘New, Mail’. Some people opine that the previous message must be removed since this has already, been sent and is therefore unnecessary. However, if a person receives several emails, it is difficult, to remember each individual email. This means that a ‘threadless email’ will not provide enough, information and the recipient may have to spend a frustratingly long time to find out the, context of the email in order to deal with it. Leaving the thread might take a fraction longer in, download time, but it will save the recipient much more time and frustration in looking for the, related emails in their inbox., https://abdullahsurati.github.io/bscit
Page 415 :
410, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Do not overuse the high priority option, We all know the story of the boy who cried wolf. Overuse of the high-priority option will make, it lose its function when really needed. Moreover, even if a message has high priority, it will, come across as slightly aggressive if it is flagged as ‘high priority’., Do not attach unnecessary files, Large attachments can annoy readers and even bring down their email system. Wherever, possible, try to compress attachments and only send attachments when they are productive., Moreover, one should have a good virus scanner in place to prevent the readers from receiving, documents containing viruses., Re-read the email before you send it, A lot of people do not bother to re-read an email before they send it out, as can be seen from the, many spelling and grammatical mistakes contained in emails. Besides, reading the email from, the recipients’ perspective will help frame a more effective message and avoid misunderstandings, and inappropriate comments., Take care with abbreviations and emoticons, In business emails, try not to use abbreviations such as BTW and LOL. The recipient might, not be aware of the meanings of the abbreviations, and in business emails these are generally, not appropriate. The same goes for emoticons. It is advisable to avoid using any entities that the, recipient might not be familiar with., Be careful with formatting, Remember that when an email is formatted, the sender might not be able to view the formatting,, or might see fonts that are different from the ones intended. When using colours, use a colour, that is easy to read on the background. One also needs to be aware of the fact that there are, some accessibility norms that do not allow the use of certain colours, keeping in mind colourblind people., Take care with rich text and HTML messages, When sending an email in rich text or HTML format, be aware that the sender might be able, to receive only plain text emails. If this is the case, the recipient will receive the message as a, .txt attachment. Most email clients, however, including Microsoft Outlook, are able to receive, HTML and rich text messages., Do not use email to discuss confidential matters, Sending an email is like sending a postcard. Do not send confidential information by email., Moreover, never make any vilifying or discriminating comments in formal emails, even if they, are meant to be jokes., Avoid using URGENT and IMPORTANT, Even more so than the high-priority option, try to avoid the use of words such as ‘Urgent’ and, ‘Important’ in an email or subject line. Use this only if it is a really, really urgent or important, message., https://abdullahsurati.github.io/bscit
Page 416 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 411, , Use the Bcc: field or do a mail merge, When sending an email, some people place all the email addresses in the To: field. There, are two drawbacks to this practice: (1) the recipient knows that the same message has, been sent to a large number of recipients, and (2) someone else’s email address is being, publicized without their permission. One way to get round this is to place all addresses in, the Bcc: field. However, if the To: field appears blank, it might look like spamming to all the, recipients. Instead, the list containing the email addresses of all recipients could be included, in the To: field, or even better, with Microsoft Outlook and Word, it is possible to mail, merge and create one message for each recipient. A mail merge also allows the use of fields, in the message so that each recipient can be addressed personally. For more information on, how to do a Word mail merge, consult the Help feature in MS Outlook., Using the cc field, Try not to use the Cc field unless the recipient in the Cc field knows why they are receiving a, copy of the message. This will depend on the situation. Only the recipients in the To field are, supposed to act on the message. The Cc field is used to keep others informed about the project,, e.g. the manager or a co-worker., The Bcc is used when a copy of the mail is to be sent to other recipients without the, knowledge of the main recipient. For example, it is used in official correspondence such as, appraisals being done by first-level managers. The first-level manager provides some feedback, to his/her subordinate over email, but includes the second-level manager in Bcc, just for his/, her information. The subordinate doesn’t get to see that the email is also copied to the secondlevel manager. This is mostly used for providing sensitive feedback that is, ‘I consider it a good rule, supposed to be private., for letter-writing to leave, unmentioned what the, recipi-ent already knows,, and instead, tell him something new.’, , –Sigmund Freud, , Do not reply to spam, Replying to spam or unsubscribing confirms that the email address is, ‘live’. Confirming this will only generate even more spam. Therefore, just, hit the delete button or use email software to remove spam automatically., , Effectiveness and Security, Email is, of course, a form of written communication, but it is different from traditional written, communication. Email is not bound by the physical limitations of a page of paper, it can be, transmitted and received very quickly, and a single message can be sent to a group of thousands, , Some Tips for Email Effectiveness, 1., 2., 3., 4., 5., 6., , Write a meaningful subject line., Keep the message focussed and readable., Use attachments sparingly., Identify yourself clearly., Be kind. Do not flame., Proofread., , 7. Do not assume privacy., 8. Distinguish between formal and informal situations., 9. Respond promptly., 10. Show respect and restraint., , https://abdullahsurati.github.io/bscit
Page 417 :
412, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , TABLE 15.11 Characteristics of memos, letters, and email, , Characteristic, , Letters, , Structure, , Contains several elements Contains lesser elements, starting from heading to than letters and does not, distribution list, include solutation and, complimentary close, , Cotains most of the elements which a letter has but, addresses are the email, addresses or email ids, , Layout, , Elements are arranged Heading elements are, an any of the layouts aligned with left margin, discussed earlier in the, vertically, chapter, , Given in prescribed format by, the email service providers, , Purpose, , To persuade and to share To share information, to To convey short routine, information, direct to recommend, or to messages quickly, congratulate, , Audience, , Generally low-tech and lay Generally high-tech or Generally multiple readers, readers, such as vendors low-tech, mostly business with various levels of, and clients, colleagues, knowledge; could include, instructors,, company, supervisors, and subordinates, as well as family and friends, , Degree of, formality, , More formal than memos Generally informal because Degree of formality is less than, because of external, of internal circulation, both in memos and in letters, and follows a conversational, destination, style, , Short forms,, , To be avoided, , abbreviations,, , Memos, , To be avoided unless, , Email, , To be judiciously used, , very common among the, employees, , Circulation, , External, , Internal, , Both internal and external, , of people as easily as it can be sent to one or two people. Since email is written communication, and it is not done on paper, we have to do what we can to make it easy to read and comprehend., Because messages are sent electronically, it is possible to get a response in a matter of minutes, or seconds. When we are communicating, trading comments separated by only a few seconds,, email is similar to spoken communication. It tends to get informal and personal, and that is, probably just the way we want to be during quick exchanges with another person. On the other, hand, when we are communicating using email, we cannot display our facial expressions or, gestures or express intonation the same way we would when speaking., There is no substitute for a well-thought-out and well-expressed message. There is also no, excuse for mis-spellings or grammatical errors in professional or business communications. To, make an email most effective, it has to be written clearly, take into account the fact that people will, likely be reading the message on a computer screen, and take full advantage of the medium itself., However, one must be aware of the ease with which email messages can be sent to unintended, readers and of the possibility that old email messages will come back to haunt the sender. The, following guidelines are worth following:, • Ensure that personal messages are sent to the correct individual and not to a mailing list., Many email users have been embarrassed by accidentally sending personal or confidential, https://abdullahsurati.github.io/bscit
Page 418 :
https://abdullahsurati.github.io/bscit, , FORMAL LETTERS, MEMOS, AND EMAIL, , 413, , messages to an entire mailing list or organization. Before sending an email, one of the, last things that should be done is check that it is being sent to the intended recipient(s)., • Do not send confidential or personal material via email unless it is encrypted because, most email systems are insecure. We suggest that any email message sent should be, treated as a public document simply because email servers typically maintain copies of, email and many people archive the email they receive. An email message sent several, years ago could turn up when least expected., , Although you may be familiar with sending and receiving email messages, the CD provides, some sample email messages., Now that we are aware of the three forms of written communication, namely letters, memos,, and emails, Table 15.11 concludes the chapter with a comparison of the various characteristics, of these very important forms of communication., , SUMMARY, Writing letters, memos, and emails is an integral, part of all academic and work environments and, cannot be avoided. To create and maintain a cordial, relationship with people one has to deal with,, one should develop the art of writing. While good, command over language is a must, one must also, know the structure of the various forms of written, communication. Effective writing possesses the, seven Cs of writing, that is, it should be clear, concise,, correct, courteous, conversational, convincing, and, complete. As a rule, any letter must to be responded, to at the earliest., The purpose of writing a letter is to sustain, a relationship or build a new one. Business, letters are of different types, such as credit and, collection, enquiry, order placement, complaint, and adjustment, instruction letters, and persuasive, letters. The principles of business writing will also, enable one to write impressive job applications, and résumés. More common today is the online, submission of a résumé, accompanied with a, covering email. Besides these types, there are official, and personal letters., Memos are a very common medium of communication within an organization. The purpose is to, , inform, persuade, or reprimand. They are classified, as documentary, congra-tulatory, and disciplinary., Most organizations have their own prescribed format for memos; however, the standard format can, be followed otherwise. Memos use a more informal, language than business letters., Emails have come to be used widely, throughout the world today. It is one of the most, convenient ways to contact people in any part, of the world for business or personal purposes., Communication through emails has its advantages, and disadvantages. Emails also have their own set, of vocabulary, jargon, and etiquette. It is prudent to, be aware of the email etiquette. Learning how to, use emails effectively will definitely go a long way, in helping one to develop good communication, skills. It is also worthwhile knowing the security, issues involved, so that we are able to make the, best use of this wonderful mode of communication., A good idea of these three major forms of, written communication will help us to use the most, effective mode in any given situation, and help us, achieve our goals effectively and efficiently., , EXERCISES, 1 Answer briefly the following questions :, (a) How are letters, memos, and emails different, from each other? Do they also have any, similarity? Explain., , (b) Emails are very fast means of communication,, but have some drawbacks. Discuss., (c) Discuss the important points to be considered, while drafting a cover letter to accompany a, résumé., , https://abdullahsurati.github.io/bscit
Page 419 :
414, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , (d) Discuss email etiquette., (e) You have submitted a proposal to University, Grants Commission (UGC) on ‘Enhancing, education in rural area through technology’., Write a letter urging action. Invent the, necessary details., 2 Recall or refer to the principles of writing business, letters discussed in this chapter and point out the, weakness in the following sentences taken from, business letters. Then rewrite them so as to make, them effective., (a) I beg to inform you that owing to the nationwide, shortage of packing material we are not in a, position to comply with your request., (b) We do not find any reason why you are asking, for the replacement of computers, which you, have mentioned in your letter reached you in, damaged condition., (c) As instructed, we will bill you for this amount., We are sending the goods today by Green, Grass Couriers., (d) Your misunderstanding of our June 7 letter, caused you to make this mistake., (e) Even though you were late in paying the bill,, we did not disallow the discount., (f) In replying to your esteemed favour of the, 5th, I submit under separate cover the report, requested by you., (g) This is to strongly protest the inappropriate, behaviour of your sales manager when I, requested her to kindly permit me to meet you, because I wanted to tell you about the external, agencies which are creating some problems., (h) With reference to your request for the supply, of 10 Kg of wheat flour to be used on the, auspicious occasion of your house warming, ceremony, we are sorry to say that we may, not be able to make any commitment at the, present moment of time., (i) You should be aware of the fact that there is, no better dealer for Greeting Cards than us not, only in this whole city but also in the other 3, metropolis., (j) Though I have carefully gone through the, report prepared and submitted by you to us, in your letter of 15th June, I regret to say that, owing to the reason that I am extremely busy,, I am not in a position to take any action for the, , proper implementation of recommendations, offered by you with great consideration., (k) I hereby acknowledge the receipt of your letter, and beg to tell you that as per the rules, it is not, required to submit your request for loan to the, branch manager., 3. Rewrite these opening sentences of claim and adjustment letters:, (a) We are sorry that we cannot accept the return, of the TV that you bought on August 5., (b) You are certainly being unfair to us when you, insinuate that we tried to put something over, on you when you bought a defective lamp., (c) We cannot understand how your records could, have been broken as you claim in your letter of, March 10., (d) We are surprised to learn that you are already, having trouble with your Cine movie projector., (e) In answer to your letter expressing, dissatisfaction with your dictating machine, I, wish to state that we stand behind anything, we sell., 4. Revise these statements granting or refusing adjustments:, (a) Although we are not at fault, we are willing to, accept return of the lampshade., (b) It is simply impossible for us to grant your, request. Everyone gets the same fair treatment, at Gordon’s., (c) Since the delay in delivery was not our fault, we, cannot accept the responsibility for your loss., (d) We shall be willing to exchange the machine in, order to retain you as a valued customer., (e) We will make this concession to you, even, though it is much more than should be, expected under the circumstances., 5. Revise these sales letter beginnings to give them, more reader appeal. You may use the method of, gaining attention in the opening sentence., (a) We are conducting an intensive sales campaign, to get the public to know about the Book Club., (b) November 5 was a night of darkness for millions, of people in the East. There was a power failure, that lasted for several hours., (c) Can’t you remember the fun you had at Lake, Joy last summer?, (d) The quality of the paper you use will affect your, reader’s reaction to your message., , https://abdullahsurati.github.io/bscit
Page 420 :
https://abdullahsurati.github.io/bscit, , (e) We believe that the Current Review is a winner., 6. Change these negative introductions to make, them affirmative:, (a) You don’t want to waste your money when you, buy tyres., (b) Srickem was developed to prevent your plastic, floor tiles from buckling and curling. You will, never have to worry about unsightly playroom, floors again., (c) Don’t you remember last December 26? Were, you prepared to cope with the record snowfall?, Were you not huffing and puffing with your, snow shovel while your neighbours guided, their snow blowers along their walks?, 7. Revise these sentences to eliminate dangling, phrases:, (a) Before rejecting these designs, we suggest that, you compare them with other plans., (b) Relying on his ability to react quickly in emergencies, the car picked up speed., (c) Already filled with students, the visitors could, find no place in the auditorium., (d) Referring to your letter of March 13, your complaint was ill-advised., (e) Having sent the incorrect invoices to you, we, assure you that we will adjust it at once., 8. Rewrite these sentences to eliminate all double, negatives:, (a) Didn’t you hear nothing from the personnel, manager about your promotions., (b) The problems had arisen so unexpectedly that, scarcely nobody in the office knew what to do., (c) Plan your vacation trip now. Don’t plan to go, nowhere this summer., (d) That cannot be done no longer by any member, of the tax department., 9. Assuming that you have the requisite credentials,, draft Job Application Letters in response to the, following advertisements:, (a) Wanted a Plant Manager (Operations) at our, new factory in Gaziabad, UP Engineering, Graduates with minimum 5 years experience, in manufactur-ing industries as Plant, Managers can apply. Salary is negotiable., Apply with particulars to Box 650, The Hindu,, Chennai-600004 latest by 30th July., (b) If you are a recent post-graduate in science, and interested in research, apply for the, post of Junior Research Associate in our R&D, , FORMAL LETTERS, MEMOS, AND EMAIL, , 415, , Division. You should hold a post-graduate, degree in mathe-matics, physics, chemistry, or, biology. If selected you will be given a Research, Assistantship of Rs 8000/- p.m. and you will, have the opportunity to work in excellent, laboratories. Apply within 15 days to Manager, Research, R&D Division, Wipro Industrues,, Bangalore–560 012., (c) Safe Insurance Company seeks personable,, college-trained person to manage office, of five employees. People skills and good, communication ability a must. Knowledge, of office procedures and Word processing, essential. Send application within 10 days, to Human Resource Office, P.O. Box 719, Kanpur., (d) Healthy, Foods, Ltd,, a, fast-growing, manufacturer in the food-processing industry,, has openings in its training program. Only, highly motivated, dynamic, and result-oriented, people with excellent communication skills, need apply. Opportunities for advancement to, management positions based on performance., Applicants must demonstrate a professional, image and possess skills in working with, people. Computer literacy required. Apply to, Personnel Manager, P.O. Box 520, Bangalore., 10. Answer as directed., (a) As the Manager of Sangam Hotel, New Delhi,, write a claim letter to the General Manager of, Bharat Potteries, Aligarh Road, Bhavanipur,, telling him that most of the contents of the, china-ware which you had ordered from, their firm have reached you in a damaged, condition. Demand replacement or suitable, compensation. Invent necessary details., (b) As the Purchase Manager of Satyam, Computers, 9 Naidu Road, Hyderabad-500007,, you had ordered two dozen Personal, Computers from Hindustan Computers, Limited (HCL), 140 M.G. Road, Bangalore500001. When the consign-ment arrived, you, found some of the pieces in the damaged, condition., (i) Write a complaint letter to the Sales, Manager of the company asking for, repair, replacement, or compensation., (ii) As the Sales Manager of HCL, draft a suitable, reply., , https://abdullahsurati.github.io/bscit
Page 421 :
416, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Use full block format in both the letters., (c) As the Purchase Officer of a Company,, write a complaint letter to Uniflex Ltd, New, Delhi, pointing out the damage which was, discovered after checking the consignment, containing Compact Discs sent to you by the, supplier. Invent the necessary details., (d) Playing the role of Senior Sales Manager, Apex, Ltd, draft a suitable reply to this claim letter., Use full block letter format for the letters., (e) Ajay purchased a VCR on August 13 from, Smiley’s TV Town, Mumbai. The VCR came with, a ‘ninety-day warranty against all defects’ and a, guarantee for ‘in-home free repairs and labor’., On October 30, the VCR showed a hori-zontal, line across the screen when she replayed tapes., Ajay called the store manager, Vikas Mallik, and, explained the problem. Mallik said the horizontal lines were caused by a dirty head and, told Ajay to bring the VCR in for cleaning. He, also told Ajay that he would be charged for this, service since dirty VCR heads were basic wear, and, therefore, not covered by the warranty., Ajay was angered by this response from the, store manager and decided to write a letter of, complaint. Based on the information provided,, write Ajay’s letter of complaint., (f) As the Sales Director of Fitness Plus Centre,, Bangalore, draft a sales letter to Business, Professisons selling them on your 3 Wellness, Packages: 1. The 3-day Fitness Weekend, 2. The 7-day Total Fitness Program 3. The, Individualized Corporate Well-being Program., (g) Assume that you are the Marketing Manager, for a professional hockey team. At present, you, are concerned about season-ticket sales for, the coming season. They are well below sales, for previous years and hence you plan to do, something about it., Draft a sales letter to those 500 people who, have bought season ticket last year but did not, this year., (h) Realizing the need of packing services in, Faridabad, Elite Professional Packers have, recently started their services in the city. You,, as the publicity manager of this company have, the onus of promoting this service., Draft a sales letter to be sent to the prospective, users., , 11. Draft a memo as directed in each of the following:, (a) Various universities in India offer their, academic programmes through distance, learning mode of education. A large number, of junior officers of a company have sought, permission to improve their educational, qualifications through these programmes. As, the Manager of Personnel Department of this, company write a memo to be sent to all Junior, Officers spelling out (a) the company’s policy in, this regard and (b) the deadline for submitting, their applications.You can also assure them, that a decision would soon be taken and, communicated to the applicants., (b) Workwell Industries Limited has observed that, a sizeable number of employees take leave on, certain occasions such as mega music event,, test cricket matches, and international film, festivals. You as the Vice President, Personnel,, feel that this hampers the smooth functioning, of the industry and tells upon the efficiency of, the organ-ization. Appealing to the Divisional, Heads of your organization to take suitable, action to prevent such mass absenteeism, draft, a memo and mark a copy of the same to your, Managaing Director., (c) The General Manager of Comfort Home, Appliances Ltd, Kolkata, is worried about the, wastage of stationery in almost all sections of, the company. Draft a memo to be signed by, him and sent to all Sectional Heads, asking, them to identify the reasons behind such, wastage and also advise the employees under, their control to restrain from such wastage., (d) Elite Industries Ltd, Gurgaon, has decided, to replace the furniture in its Marketing and, Human Resource Development Divisions., As the Office Manager, write a memo to, the Purchase Officer to identify the items of, furniture to be replaced, identify the supplier,, and submit a memo containing all the related, details for administrative approval. Mark a copy, of this memo to the Finance Manager., (e) The Clean Food Products Ltd, Kanpur has, decided to provide Internet surfing facilities to, all its employees. As the Managing Director of, this company, draft a memo to be circulated, among all the Divisional Heads containing the, following details:, , https://abdullahsurati.github.io/bscit
Page 422 :
https://abdullahsurati.github.io/bscit, , The location, number of computers to be, made available, timings, and procedure for, lodging complaints if any., 12. Recently you read in the editorial column about, honour killing practised in the conservative Indian society. Write a letter to an editor drawing, attention to the stigma in society., 13. Through the medium of letter to the editor, you, want to share your feelings about the award winning film 'Slumdog Millionaire'. Write a letter to, the editor reflecting the fact that this film does, not only deal with the down trodden urchins but, also want to generate awareness about the imbalances in the country., 14. You are the coordinator of the English drama club,, and you want to stage 'Othello' by Shakespeare, this Saturday. Write to the Welfare Division to, book the auditorium and get the arrangements, done for light and sound system., 15. Write a letter of declining the invitation to the, course corrdinator of National Academy of Defense Production who has invited you to deliver, the guest lecture on 'Interview Skills'. Invent the, necessary details., 16. Email, (a) Should email replace the communication, forms such as memos and letters? Explain your, answer., , FORMAL LETTERS, MEMOS, AND EMAIL, , 417, , (b) Imagine yourself to be the instructor of a, course in which 75 students have registe red., Draft an email to be sent to all these students, asking them to select a topic of their choice, and prepare for a professional presentation of, 10 minutes duration., (c) As the Sales Manager of a company, draft a reply, which has to be sent in the form of an email to, three customers who have complained about, your product. Invent necessary details., (d) Assume that you are the Managing Director of, a company dealing with electronic equipment., Inform all your employees about the new, community hall which the company is going to, inaugurate next week. Highlight the important, features of both the hall and the inauguration., (e) As the Personnel Manager of a multinational, firm, draft an email to be sent to those, candidates who were not selected in the, interview conducted few days before. Take, care not to be courteous and sympathetic, while conveying the negative message., (f) What are the various email service providers, that you have come across? Compare the, structure and layout of the email facility, offered by them., 17. The following formal letters are ineffective. Rewrite each of them keeping the principles of business letter writing in mind:, , (i), Spotless Washing Machines Pvt.Ltd., 10, Browning Street, Kanpur, U.P., Website: swmpl.org Phone: 0123-44455566, 23 March 2014, Mr. Vipul Kumar, 35, Race Course Road, Kanpur, U.P., Dear Customer:, Sub: Invalid cheque sent by you, Your cheque sent by you for the balance payment of the washing machine purchased by you a few months, ago from us as you had wanted more efficiency in your washing and also wanted to have more choices in, terms of color, capacity, model, etc., as compared to the earlier one you had been using for quite sometime, has bounced back from the bank today., It is your duty to check your bank balance befor sending the balance payment to us! Now we have to wait, for your cheque again for some time., https://abdullahsurati.github.io/bscit
Page 423 :
418, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , As you know, we are one of the leading dealers in Washing Machines in Kanpur and we have different types, of clients. Some pay in time; some pay on time; but so far nobody has sent a bouncing cheque! Of course,, you are one among those who pay the amout in time but what's the use?, Here's your cheque and we expect you to do the needful at your earliest without fail., Ashish Kumar, Sales Manager, Enclosure: Your cheque, (ii), 11 May, 2014, Avy Trading Corporation, Daryagunj, Vijay Nagar,, New Delhi-110005, Telephon: 011-2345678, Mr Ravi Malhotra, Sales manager, Reva Computers, Ajmer Road, Jaipur-302006, Dear Mr Malhotra, We saw your advertisment in the The Times of India about one of your important products. The advertisment caught or attention because we are interested in this product. In fact, we want to equip our corporate, office with modern facilities and we would like to buy this product., However, we cannot send the purchase unless we know more about this product. Send us more information about the product as soon as possible. We want to know many things, which include product product, specification and special features of this model of the product, details of discount for bulk purchase, an, estimate for the cost of the product, and details regarding terms of business and delivery dates., Respond to this letter as early as possible., Yours Sincerely, Amit Jain, (iii), 24, Malaya Road, Vellore, India, Commercial Art & Design, Subject: Freelance Graphic Designers for advertising and marketing Campaign Enclosure: Sample copy of, graphic Design and Campaigns, Onoff Pvt. Ltd., Connaught Place, New Delhi, India, Our Reference: MA / 1230, Dear Business owners,, Designing a great marketing piece is a lot like baking a cake. Anyone can throw some ingredients together, and plunk them in the oven. But to take a mouth watering, threelayer chocolate cake you need all the right, ingredients in just right proporitions and the knowledge to put them together correctly., Our firm provides freelance graphic designers are highly qualified and trained professionals we are proud to, boast that we have a long list of clients. Do you dread the thought of a new advertising campaign for your, business? Does the thought of creating a new sales brochure overwhelm you?, Call us today at 09888880000 and let's finalize the deal otherwise you will have to pay a heavy penalty for it, .Thanks for your time., It's time you should obliged by our services and gives us maximum profits. Great commercial art and graphic design business is just a phone call away., Director 'Sharma', Your sincerely, 10 May 2014:, https://abdullahsurati.github.io/bscit
Page 424 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 16, , OBJECTIVES, , Research Papers and, Technical Descriptions, INTRODUCTION, , Research is an essential ingredient of all fields of study as well as all, professions. Whether an academician or a working professional, one, has to be involved in research to become better equipped in the chosen, • the characteristics and, field. Research can be performed individually on one’s own initiative or, components of a research, paper and the steps involved in as a member of a research project team., Any systematic investigation towards increasing the sum of, writing one, • guidelines for creating effective knowledge can be termed as research. Sometimes one may undertake, research work that is a replica of some previous study in order to test, technical descriptions, the reported findings or the relevance of such findings under different, circumstances. At other times, one may undertake research to make, decisions regarding a new development or to refine or qualify the, findings of earlier studies. Research may also be based on a meticulous, search of material in journals, books, or other publications, or carefully, designed experiments. However, every piece of research must make an, original contribution to existing data and knowledge, irrespective of, the method of enquiry., At the end of a research, once books and magazines have been, referred to, field trips have been completed, and experiments have been, carried out in the laboratory, there remains the task of organizing the, results and publishing them. The research would hardly be of any value, unless the findings are disseminated to others working on or interested, in the same sphere of activity or knowledge. Now, how does one go, about this? The findings can be presented in a professional gathering, or, if one wishes to reach a wider audience, the work can be published in, a journal. In either case, the facts and opinions have to be organized, so as to present their meaning as clearly and descriptively as possible., Such an organized analysis of a subject written mainly to record and, disseminate information or knowledge, or to present a point of view, on a selected topic, is known as a research paper., It is a documented prose work incorporating the results or findings, of an original work. It may also be called a scientific paper, investigative, You should read this chapter, to know, , https://abdullahsurati.github.io/bscit
Page 425 :
420, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , paper, or library paper. In fact, it is a long essay often supported by relevant references from, suitable sources. It gives a concise account of the work performed, the materials used, the, methods adopted, and the results arrived at., A research paper must be the first disclosure of a new research finding, presenting information, that would enable peers (people associated with the field of study) to (a) assess observations, (b), repeat experiments, and (c) evaluate intellectual processes. It is obvious that the knowledge required, from research should be quickly publicized to avoid wasteful duplication of work (by another, researcher) and to establish the researcher’s claim to the priority of discovery. Further, when the, findings of a research are published in the form of a research paper, the efforts acquire a permanent, value. However, it is worth noting that all research journals of repute control the number of papers, published by a rigorous referring system to ensure the originality and quality of contribution., The other important technical document, which is an indispensable part of any technical, project, is technical description. Technical descriptions are an important part of any technical, document, be it a letter, a thesis, or a report. We have learnt so far that whenever we correspond, on technical matters, our intention must come across very clearly through our communication., The section on technical descriptions in this chapter explains how large amounts of information, about any unfamiliar or novel object or process can be presented in an understandable and, useful manner., , RESEARCH PAPER, In its style, structure, and approach, a research paper closely resembles a formal report. Hence,, the characteristics are also similar, except for a few differences. While a research paper is written, mainly to disseminate new knowledge acquired through research, a report is written to facilitate, decision-making or problem resolution., The audience of a research paper might choose not to read a research paper, but a report, will definitely be read by the target audience. The incentive of a research paper may be one’s, professional advancement, whereas a report always arises out of a specific need., , Characteristics, Given below are the chief characteristics of a research paper:, W, , b, , ‘Guys we have to justify the existence of this analog receiver, department. We need some fresh research.’, , 1. A research paper is the most important, form of expository discourse. It may, be written on any topic or subject—, scientific, technical, social, cultural, etc.,, but the treatment is scholarly in nature., 2. It is highly stylized and contains, a high concentration of certain, writing techniques such as definition,, classification, interpretation, abstraction,, and description., 3. It is objective in nature and the, presentation of information is accurate,, concise, direct, and unambiguous., 4. Generally, it contains almost all the, formal elements that a technical report, includes., , https://abdullahsurati.github.io/bscit
Page 426 :
https://abdullahsurati.github.io/bscit, , RESEARCH PAPERS AND TECHNICAL DESCRIPTIONS, , 421, , 5. Most research papers are characterized by the use of visual aids, and scientific, technical,, or specialized vocabulary., 6. Every research paper is a unified composition arising out of the study of a particular, subject, assembling the relevant data, and organizing and analysing the same., 7. A research paper is a documented prose work. All important analyses have to be supported, by adequate evidence. In short, documentation is essential for all research papers., , Components, A research paper is a piece of written communication organized to meet the needs of a, standard, valid publication. It is therefore highly structured, with distinctive and clearly evident, component parts, which are listed below:, •, •, •, •, •, •, , Title, Authors, affiliations, and addresses, Abstract, Introduction, Materials and methods, Results, , • Discussion, • Conclusions, • Acknowledgements, • List of symbols, • References or bibliography, , When a research paper is published, it is properly formatted according to the style used, by the journal publishing the article. The journal editor provides inputs to the authors on the, various standard elements and format required by the journal. The author then submits the, article in the required format. Refer to the CD for an exhibit of a journal article, showing the, components listed above., , Title, The title of a research paper may be defined as the fewest possible words that adequately, describe the contents of the paper. It ought to be well-studied and should give a definite and, concise indication of the rest of the paper., In preparing the title for a paper, remember that the title will be read by thousands of, people. Many people will read the title either in the original journal or in one of the secondary, (abstracting and indexing) publications. Therefore, choose all the words in the title with great, care and ensure that their association with one another is meaningful. Remember that the, indexing and abstracting services depend heavily on the accuracy of the title. Also, an improperly, titled paper may be virtually lost and may never reach its intended audience. An effective title, •, •, •, •, •, •, , Is a clear indication of the contents of the paper, Is neither too short nor too long, Contains specific and not general terms, Is built on careful syntax, Is a label and not a sentence, Avoids the use of common abbreviations, specific notations, and reference numbers, , Table 16.1 gives examples to illustrate how to prepare appropriate titles., , Names, affiliations, and addresses of authors, The full names of the authors and their designations are mentioned just below the title of the, research paper. For instance, if the author ABC is a Professor of Mechanical Engineering at, XYZ University, the name and designation can be written as follows:, https://abdullahsurati.github.io/bscit
Page 427 :
422, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , TABLE 16.1 Examples of titles for a research paper, , Poorly-worded title, , Well-worded title, , • March2 serves as an automated validation tool • March2: An Automated Validation Tool for the, (a sentence; not specific), APOLLO2 Code, • Using Parallel Computers for Numerical Studies • Numerical Studies on the Interaction between, in the Atmosphere, Ocean Interaction (careless, Atmosphere and Ocean Using Different Kinds of, syntax, general), Parallel Computers, • Evaluation of the Measures to Adjust the Increase • Evaluation of the Measures to Adjust the Increase, of Outpatients in MIS (ambiguous abbreviation), of Outpatients in Medical Insurance System, , ABC, Professor, Department of Chemical Engineering, XYZ University, Address, An address serves two purposes: it serves to identify the author and it also supplies the, author’s mailing address. The mailing address is necessary for many reasons, the most common, one being to enable the readers to get reprints if required. Unless the writer of a research paper, wishes to publish anonymously, it is obligatory to provide a full name and a full address. The, authors’ names should be spelt and given in the same way in all their publications. Departure, from this causes confusion at the time of accumulating information., In the case of a multi-author paper, if different authors of the same paper have different, addresses, the addresses are linked to the names using superscripted indicators. The addresses, are placed either directly below the names of the authors or in the form of footnotes. The author, to whom correspondence concerning the paper is to be addressed is indicated by an asterisk (*), and the footnote, ‘Author for correspondence.’, Only those authors who have actively contributed to the overall design and execution of the, experiments are listed. The authors are listed in the order of importance to the experiments, the, first author being acknowledged as the senior author and primary progenitor of the work being, reported. However, there is no uniformity regarding the order in which the names of authors, should be given; they are sometimes listed alphabetically. Lack of uniformity in this respect, sometimes causes problems and confusion at retrieval and retrospective research stages. There is, an obvious need for consensus in this regard at the international level., , Abstract, With increased importance acquired by secondary services, particularly abstracting periodicals,, the abstract of a research paper has assumed special significance. It has two main functions:, 1. To enable readers identify the basic content of a document quickly and accurately in, order to determine its relevance to their interests and thus to decide whether they need, to read the document in its entirety, and, 2. To meet the requirement of abstracting journals., There are two types of abstracts: informative and indicative. Normally, a research paper, should have an informative abstract that gives information about the purpose of the study,, newly observed facts, conclusions of an experiment or argument, and, if possible, the essential, parts of any new theory, treatment, apparatus, technique, etc. Sometimes, the abstract is read, instead of reading the full paper. It should, therefore, be self-contained with regard to the new, https://abdullahsurati.github.io/bscit
Page 428 :
https://abdullahsurati.github.io/bscit, , RESEARCH PAPERS AND TECHNICAL DESCRIPTIONS, , 423, , information being presented in the paper. The other common type of abstract is an indicative, or descriptive abstract. This is more suitable for long, descriptive papers. An indicative abstract, indicates the contents of the paper and the scope of the work carried out without giving much, information about the results and conclusions., The characteristics of an abstract are as follows:, , 1. It is as concise as possible and does not exceed 3 per cent of the total length of the paper., 2. It is self-contained., 3. It does not contain any bibliography, figure, or table references., 4. It does not contain any unfamiliar abbreviations and acronyms., 5. It is generally written after the paper is prepared., The steps involved in preparing an abstract are mentioned below:, 1. Read the introductory paragraph of the study to identify the objective., 2. Scan the summary and conclusions at the end to note down the main findings of the study., 3. Read through the text for information on methodology adopted, new data, and any, other vital information., 4. Prepare a draft arranging the various items in the following order: objective, new, methodology or equipment used, data of fundamental value, and major conclusion and/, or correlations derived., 5. Modify and trim the abstract to the required size., Refer to the exhibit in the CD of a journal article. The opening paragraph is the abstract of, the article., , Introduction, The purpose of an introduction is to supply sufficient background information so as to allow the, reader to understand and evaluate the results of the study. It may, therefore, become necessary, to refer to work performed earlier only in strict relevance to the above purpose. Sometimes it, is necessary to outline the author’s earlier attempts to solve the problem along with citations, to relevant literature. It is, however, redundant to attempt a complete historical survey of the, earlier work. Very often, it is possible to cite a single reference to an important recent review, article instead of giving a long list of references; all of them might have been referred to in the, review article. The following are guidelines for writing a good introduction:, • First, present the nature and scope of the problem investigated., • Review the pertinent literature to orient the reader., • State the method of investigation and, if necessary, the reasons for the choice of a, particular method., • State the principal results of the investigation and also the principal conclusions, suggested by the results., , Materials and methods, The main purpose of this section is to describe (and if necessary defend) the experimental, design, experimental technique, or theoretical derivation, and then provide enough details so, that a competent worker can repeat the experiments., If a well-known technique or approach is used, it is enough to cite the relevant literature, reference where the description is available. If the original source is difficult to understand,, the method must be described more in detail than just citing a reference. In cases where the, https://abdullahsurati.github.io/bscit
Page 429 :
424, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , technique or approach adopted involves some modification over the earlier technique or, approach, give only a detailed description of the modification., For materials, mention relevant specifications. Describe the experiments performed, the, ranges covered, the new equipment used, etc. in sufficient detail. Also include quantities and, even physical properties of the reagents used besides providing the technical specifications. This, section usually has subheadings., , Results, This section forms the core of the paper—the data. There are three ways of presenting the data:, (a) text, (b) tabular form, and (c) illustration form. A particular set of data should be given only, in one of these forms. Avoid duplication as far as possible., Choice of data While selecting data for inclusion in a paper, avoid the two extremes in this, respect. One extreme is the tendency to shift almost the entire data present in the laboratory, notebook to the paper. At the other extreme is the situation where data is so insufficient that the, reader cannot understand the logic of the conclusions drawn. Give essential data that form the, basis for the major conclusions emerging from the study. Let the rest of the data (supporting, data) stay in the laboratory notebook. Extensive data for future reference should be deposited, in a central data repository, to be made available on demand. Insert a footnote to this effect in, the paper at a suitable place., Choice of form of data presentation Present only simple and descriptive data in the text., Highlight important data in tables or graphs. This facilitates comprehension and makes, descriptions and comparisons vivid. Information given in tables or figures should supplement,, not duplicate, the information provided in the text., As to the choice between tabular and illustrative forms of presentation, the broad criterion, is that for values (requiring a high degree of exactness), a tabular presentation is preferable., However, illustrations are preferred to highlight trends. Avoid presentation of trivial data in, tables or illustrations, as it leads to distraction., Presentation of data in tabular form Tables should be self-sufficient, capable of conveying a, message independently. Each table should have a self-explanatory title., All tables should be numbered consecutively in Arabic numerals and should be referred to in, the text by numbers and not by terms such as ‘above’, ‘below’, ‘preceding’, or ‘following’., Column headings should be brief. For units of measurement, standard abbreviations should, be used and these should be placed below the column headings. Avoid structural formulae and, other such material that cannot be readily typeset inside tables., Do not make the tables complex by including too many items and too many details in them., Rather than making a cumbersome single table, complex data should be divided and presented, in two or more tables. It is also quite often possible to simplify tables by taking out common, data and putting them as running matter below the title as headnotes. Footnotes can also be, used judiciously to reduce the number of columns., In the case of big tables, which can neither be shortened nor be split up, try to avoid printing, on a bigger sheet and folding the same. After some years, through ageing of paper and constant, use in the library, the paper is likely to crack at the fold. In such cases, the table may get, detached and misplaced. It is preferable to continue the table on the next page. Of course, the, title and the column headings have to be repeated on the second page, but this does not add, much to the overall cost., https://abdullahsurati.github.io/bscit
Page 430 :
https://abdullahsurati.github.io/bscit, , RESEARCH PAPERS AND TECHNICAL DESCRIPTIONS, , 425, , Presentation of data in illustration form Each illustration adds to the cost of production., Therefore, include only absolutely essential figures. For example, a figure showing a linear relationship, between two parameters can be safely dropped; a mere statement to this effect in the text would, suffice. Infrared, ultraviolet, and Nuclear Magnetic Resonance (NMR) Spectra and Differential, Thermal Analysis (DTA) curves need not be included; it is enough to give the significant numerical, data in the text. Restrict the number of structural formulae to the bare minimum., Considerable economy in cost and space can be achieved in a number of ways, such as, combining several simple graphs into a composite illustration, particularly when either both, the parameters or only one parameter is common, and making judicious alterations in scales to, reduce the size of the illustrations., Research papers are usually set in double column setting. For economy of space, efforts, should be made to accommodate as many illustrations as possible in single-column width; page, width size should be chosen only in exceptional cases. See the journal articles exhibited in the, CD for examples of single-column figures., Line drawings should be made with Indian ink on white drawing board, cellophane sheet,, or tracing cloth. Along with the original drawings, one or two sets of blueprints or photocopies, should be supplied to the editor for use at the refereeing stage and other operations prior to the, final printing of the paper., All illustrations (graphs, photographs, flow diagrams, circuit diagrams, etc. taken together), should be assigned consecutive numbers in Arabic numerals in the order in which they are, referred to in the text. All figures (graphs, structures, formulae, schemes, charts, etc.) should be, referred to in the text as ‘Fig. 1’, ‘Scheme 1’, ‘Chart 1’, etc. and not by expressions such as ‘below’,, ‘above’, preceding’, or ‘following’., Captions and legends should be simple, but self-explanatory As in the case of tables,, crowding of data in illustrations is likely to cause difficulty for the reader to comprehend, correlations and should be avoided. Also avoid including too many explanatory notes and other, details inside illustrations., While getting illustrations made, pay due attention to the reduction they are going to, undergo while printing. The size of letters, numbers, dots, etc. should be such that on reduction, they become neither illegible nor too big. Ensure that the lettering of all the illustrations is, such that on reduction it closely matches the text font size. For best results, the optimum size, of an original illustration is two to three times the reduced size. This affords enough reduction, to conceal drafting imperfections. When explanations for symbols used inside illustrations are, given in captions, use only such symbols that are available with the printer., For presenting statistical data, various types of illustrations can be used: graphs, histograms, (bar diagrams), pie charts, etc. When there is continuity of variation between two parameters, (e.g., temperature vs pressure), use graphs. When data are taken over periodic intervals (e.g.,, census taken every ten years), use a bar diagram (histogram). When the purpose in making, an illustration is to show relative proportions of components of an entity (e.g., percentages of, different minerals occurring in a country), it is preferable to use a pie chart., Photographs (half-tone illustrations) Submit photographs that show important features, prominently and clearly. The background should be unobtrusive, free from distracting objects,, and uniform in tone, yet in good contrast with the principal objects of interest. White glossy, prints, one and a half to three times larger than the reproduction desired, give best results. Prints, on matt paper are not suitable for reproduction. In the case of instruments and equipment,, preference should be given to line drawings over photographs., https://abdullahsurati.github.io/bscit
Page 431 :
426, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , By suitably marking unwanted portions of a photograph, the size can be shortened and the, reduction kept to the minimum. In the case of photomicrographs and electron micrographs,, magnification should be mentioned along with the caption (e.g., ×1500). Size reduction, of such illustrations should be avoided as far as possible. If, for an unavoidable reason,, minor reduction becomes necessary, this change should be taken into account while giving, magnification. Another way to indicate magnification is to insert a scale in the illustration, itself at a suitable place., , Discussion, The main functions of this section are to interpret data and to highlight the significant features, of the data and the possible causes of these features. It should also mention the limitations, if, any, of the data and point out any sources of error., Avoid the tendency to repeat the description of data in this section. What is obvious from, the tables or figures need not be described in the text again. This section should interpret the, data depicted in the figures and tables., Conclusions, Conclusions should stem directly from the data presented and no extra material should be, introduced. When there are significant findings, conclusions are a necessary part of the paper., The major function of conclusions is to make recommendations based on the results of the, study. If no recommendation emerges, this section can be avoided., In such cases where the study has led to clear-cut findings, it is preferable to give the, conclusions in the form of a series of numbered points., Acknowledgements, In the acknowledgements section, two possible ingredients require consideration. First, any, significant technical help received from any individual, whether in the laboratory where the, work was performed or elsewhere, should be acknowledged. Also acknowledge the source of, special equipment, other materials, etc. Second, acknowledge any outside financial assistance, such as grants, contracts, or fellowships in this section. This section does not include scientific, details, but is equally important as it conveys courtesy and gratitude for all the help received for, the completion of the project., List of symbols, Standard abbreviations can be used. It is a good practice to give the full version followed by the, abbreviation within parentheses at the first occurrence. Thereafter, only the abbreviated form, may be used throughout., One- or two-letter symbols may be used to represent physical quantities, units, or chemical, elements. Use only standard symbols. All symbols other than those that are in common use, must be explained in the ‘nomenclature’ section., Names of units and their abbreviations should conform to standard practices. The most, appropriate system is the International System (SI) of Units., References, The main purpose in citing references to the work of earlier researchers is to enable the reader, to consult the original source. Therefore, unless the references are complete in respect of all, https://abdullahsurati.github.io/bscit
Page 432 :
https://abdullahsurati.github.io/bscit, , RESEARCH PAPERS AND TECHNICAL DESCRIPTIONS, , 427, , bibliographic details, the readers will face immense difficulty in locating the original sources., Only such references should be cited as have been actually consulted., , TECHNICAL DESCRIPTION, Technical description is a key part of any descriptive technical document because it defines, objects and/or processes. Basically, a technical description divides a complex item or topic, into more manageable components. It defines, describes, and illustrates the various elements, contained within the whole—whether an object, process, or concept. As an example, one might, break down something as complex as a human body into its various components, such as the, nervous, circulatory, and digestive systems, and muscles, organs, and tissues. This process (called, division and classification) helps to manage the overwhelming amount of detail inherent in, complex tasks such as the description of the body. It is simply breaking down large amounts of, information into more manageable segments., In many cases, the division process continues through many levels of detail; for example, one, component of the digestive system might be the stomach, which is further divided into valves, and secretive pores, and other more minute elements that make up that particular organ. The, process of classification groups similar items on the basis of function or location or material in, order to put them into some category relevant to the descriptive task. The general guideline for, writing technical descriptions is to generate iterations (cycles) of naming, defining, describing,, and illustrating. The technical description usually ends with a description of one complete cycle of, operation of the object or process., , Guidelines for Writing Good Descriptions, The following are guidelines for writing good technical descriptions with respect to organization,, content, and structure., , Organization, Overview Begin with a brief overview that reveals the object’s, (a) Overall framework, arrangement, or shape, (b) Purpose or function, , Parts Divide the object into parts and describe each part, , (a) In sufficient detail so that reader is able to use, make, or draw it, (b) In a way that reveals its role and its relation to other parts, , Order Organize the part descriptions in one of the following orders:, (a) Spatial order (top to bottom, outside to inside), (b) Priority order (most to least important), (c) Chronological order (order of [dis]assembly), , Content, Specifics, (a) Include relevant specific features (such as size, shape, colour, material, and technical names), (b) Omit irrelevant background, confusing details, and needless words., Comparison Compare features or parts with other things already familiar., https://abdullahsurati.github.io/bscit
Page 433 :
428, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Contrast Contrast properties with the properties of others to reveal their significance., , Structure, Format Clarify the text with, , (a) Heads Identify topics with clear, nested section headings., (b) Lists Itemize related features with indenting and marks., (c) Figures Integrate figures and text with labels and references., , Verbal cues Guide the reader through the instructions with, , (a) Parallelism Use parallel words and phrases for parallel ideas., (b) Proleptics Use verbal links (also, but, however, etc.) to signal how the description fits, together., , Checklist, As you reread and revise your instructions, watch out for problems such as the following:, , • Make sure you provide real instructions—explanations of how to build, operate, or repair, something., • Write a good introduction—in it, indicate the exact procedure to be explained and, provide an overview of contents., • Make sure that you use the various types of lists wherever appropriate. In particular, use, numbered vertical lists for sequential steps., • Use headings to mark off all the main sections and subheadings for subsections., (Remember that no heading ‘Introduction’ is needed between the title and the first, paragraph. Remember not to use first-level headings in this assignment; start with the, second level.), • Use special notices as appropriate., • Make sure you use proper format for all headings, lists, special notices, and graphics., • Use graphics to illustrate any key actions or objects., • Provide additional supplementary explanation of the steps as necessary., • Remember to create a section listing equipment and supplies, if necessary., • Include strong sections of definition, description, or both, as necessary, using the, guidelines provided on content, organization, and format., • Share the draft with the people of similar aptitude and knowledge for whom the, instructions are made, , Writing Technical Descriptions, The main steps involved in writing technical descriptions include naming, definition, (assigning meaning to objects), description (highlighting certain aspects of the object), and, illustration (description using graphic elements rather than words). These four activities are, explained as follows:, , Naming, This most basic activity, naming, is how we understand the world around us. Without names,, we would have to refer to objects, people, or places with sounds and gestures: ‘uhh, that big, https://abdullahsurati.github.io/bscit
Page 434 :
https://abdullahsurati.github.io/bscit, , RESEARCH PAPERS AND TECHNICAL DESCRIPTIONS, , 429, , thing over there’ or ‘you know, what’s his name, the little fat guy with the blue hair’. This might, be acceptable to some extent in a face-to-face communication, but it is impossible in written, communication. We describe the world around us by naming what we see. Hence, start with, naming the objects and processes that are being described., , Definition, A technical description begins with a definition (formal or extended) of the object or process to, be described and a general breakdown of the components that will be detailed. The introductory, paragraphs (or pages, in some cases) provide the reader with general information of the content, that follows. Usually, the definition is followed by a list of the components and a brief note on, the detailed description of each. In the case of the digestive system, for example:, First, the definition, , The digestive system is essentially a tube passing through the body from the mouth to the anus. It is responsible, for the ingestion and processing of food into useable energy, which is taken up by the body’s cells, and nonuseable waste products, which are eliminated., , Then, the list of components, , The digestive system consists of the mouth, oesophagus, stomach, small and large intestines, the colon, and, the anus., , Finally, an outline of the detailed description that follows, , Each of these components is described in terms of its function and cellular makeup in the subsections that, follow., , A definition fixes an object, concept, or process within some system of knowing. Definitions, appear in one of three forms: formal, informal, and extended definition. A formal definition will, contain a term (that which is to be defined), a category to which the term belongs, and a set of, differentia (a set of words that separate the term from those elements within the category in, which the term is located). An informal definition appears in brackets in a sentence to help, clarify a concept (for example, one was used in the definition of term above). An extended, definition is a form of technical description itself and may run to tens, hundreds, or even, thousands of pages in length. The formal definition is the most common form and is the one, given in dictionaries. As a rule, a definition cannot use the term itself in the category or the, differentia. For example, we cannot say that a Calico cat is a cat that is calico in colouration—, this is referred to as a circular definition., If you have ever played ‘twenty questions’ (the game in which the players try to guess the, identity of an object in the mind of another player by asking questions to which the answer, can only be yes or no), you will have a good grasp of categories. To start a game like this one,, a player will ask a question such as ‘Is the object manufactured’ or ‘Is the object natural’. It, would be useless to ask ‘Is it a comb’ right away since you only have twenty questions that, you can ask. The strategy to playing successfully is to narrow the category to which the object, belongs sufficiently so that naming specific objects becomes a possibility., Asking whether an object is big or small provides no useful information because the terms big, and small are relative—one quickly learns to relate the size to something specific—like a Volkswagen, or a Canadian dime. For example, a float-plane is an object that is larger than a Volkswagen, but you, would still have a difficult time determining the name of the object from that category., Functional categories are also useful in this case; such as ‘What does it do?’. Questions such, as ‘Is it a form of transportation?’ or ‘Is it a tool?’ might help. To guess that the object is a form, https://abdullahsurati.github.io/bscit
Page 435 :
430, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , of transportation gets us somewhere closer to a correct guess, in the case of the float-plane, but, so are cars, trains, and ships. As it is obvious, narrowing the category is critical to winning this, game—guess air transport, guess fixed-wing air transport, guess fixed-wing air transport that is, able to take off or land on water and you have a working definition of a float-plane., , Description, Description is the process of making an object, idea, or process known to someone who is, unfamiliar with it (it is very much like a definition in that respect). A description will use words, and illustrations to outline the shape, the material, the purpose or function, and the relationship, of one object, idea, or process to other objects, ideas, and/or processes. A description attempts to, make the unknown familiar; therefore, it occasionally uses the light of the familiar to illuminate, the darkness of the unfamiliar. In this quest, it is common for descriptions to use analogies,, metaphors, or similes to get an idea across (for example, the metaphors of light and darkness in, the preceding sentence were used to carry the meaning of the process of gaining knowledge)., Description also relies upon strategies of organization such as division and classification,, comparison and contrast., Division and classification is the process of breaking down complex systems into more, manageable components and then grouping the components together based on some overriding determinant such as spatial relationship, functional or genetic similarity, chronological, relationship, or a host of other bases upon which a classification can take place. The result is, usually informative or analytical in nature rather than comparative. When the programming, takes place for solving an algorithm, the programme is made of subprogrammes which are, called within the main programme to get the final output of the algorithm., Comparison and contrast is familiar to most people who have ever shopped for something, that is made by many suppliers, or that comes in a variety of models—like a car or a computer., The compare and contrast method depends on a fixed set of criteria (such as cost, practicality,, efficiency, or options available) in order to analyse the choices presented to the user. The criteria, are applied to each of the cars or computers, for example, and a comparison of the results, usually points to a better car or computer. Compare and contrast analysis is result oriented, and, sometimes persuasive, rather than being strictly informative., Illustrations, It has been said that a picture is worth a thousand words; however, in technical writing, it must, be understood that a picture does not replace words; rather it enhances the meaning of the words. A, prudent technical writer uses graphics to his/her advantage to show an overall view of the object, or process and to illustrate each of the sub-divisions into which the object or process is divided., Graphics are very useful as aids to transmit meaning, especially when language is a barrier to, understanding, but they are limited to describing something abstract. Consider the following: How, would you describe the beautiful maple leaf to someone who has never seen one? Or a hockey stick?, Graphics are ideal for representing things that are complex. However, they do not define, themselves; we have to label and describe each part of the graphic based on what we want to, convey. Consider this example: Is the definition of a hockey stick different for someone who, has never seen one compared to someone who uses one professionally? The answer is yes. The, hockey player defines the stick in a much different way because he/she has a different need—the, player defines the stick in terms that are more refined: blade width, amount of curve allowed,, shaft flexibility, and a host of other regulations imposed by the governing body of whichever, https://abdullahsurati.github.io/bscit
Page 436 :
https://abdullahsurati.github.io/bscit, , RESEARCH PAPERS AND TECHNICAL DESCRIPTIONS, , 431, , league he/she plays in. The person who has never seen a hockey stick will most likely want to, know what it looks like and how it is used., , Process Description, Once the components of the object, idea, or process have been described—and illustrated—there, is one more form of description that allows the reader to visualize the complete function: the cycle, of operation. This is a functional or relational description and shows how all the parts described, work together to produce the desired result. This section takes the form of a narrative and gives, the reader an overall view of the object, idea, or process. Process descriptions are written as if the, process is taking place right now—and so in present tense. They usually begin and end at the same, point; for example, press the start button/stop button, or feed in raw material/extract the finished, product. Hence, ensure that a technical description follows this basic three-step form:, , • A definition, followed by a list of the major components to be discussed, and an, illustration., • A section for each of the major components listed, which defines the components in, terms of their function and then describes the components in terms of their material,, dimensions, texture, relationship to other components, the method of attachment (and, any other descriptors necessary), and lists all sub-components (which will also follow the, basic ‘define, describe, and illustrate’ format), • A description of one complete cycle of operation (a process description)., , The following examples of object and process descriptions will help you understand how the, guidelines given in this chapter can be used to write good technical descriptions., , Object Description: Dual-option Burner System, The dual option burner system can be operated either with or without a flow spoiler for optimum, operation under different analytical conditions. Some versions of the dual option burner system also, allow use of a removable impact bead. Consult the Spectrometer instruction manual for details on, the burner system provided. A diagram of the dual-option burner system is shown in Figure 16.1., , FIGURE 16.1 Diagram of dual-option burner system, https://abdullahsurati.github.io/bscit
Page 437 :
432, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , The premix burner chamber is molded from plastic and treated to insure proper drainage., The burner system can be operated either with or without a flow spoiler. The flow spoiler is, molded of polypropylene and is held in position by three support arms which press-fit to the, walls of the mixing chamber., To facilitate removal, the end cap is held in place by four large knurled-head screws. A, large O-ring, held captive by a groove in the end cap, is used to seal the end cap to the mixing, chamber. For extended operation with organic solvents, a Corkprene O-ring is also available., For routine operation it is recommended that the burner system be operated with a flow, spoiler. The flow spoiler helps to remove large droplets from the nebulizer aerosol and thus, minimizes chemical interferences. Removing the flow spoiler provides somewhat improved, sensitivity with generally little or no degradation in precision. However, it is recommended that, operation without a flow spoiler be restricted to the analysis of relatively “clean” samples, where, the risk of chemical interferences is low., , Burner heads, There are four burner heads available for use with the dual-option burner system. They are all, made of solid titanium which is corrosion resistant and free of most of the elements commonly, determined by atomic absorption., The 10-cm burner head is designed to be used with the air-acetylene flame. Because of its, long burner path length, it provides the best sensitivity for air-acetylene elements., The 5-cm nitrous oxide burner head is required for nitrous oxide-acetylene operation. On, many spectrometer models, it can also be used with air-acetylene or air-hydrogen. It can be, rotated 90° to provide reduced sensitivity., The three-slot burner head is designed to be used when analyzing samples with high, concentrations of dissolved solids. The three-slot burner head is not compatible with all gas, control systems. Refer to your spectrometer operating manual or hardware guide for information, about possible use of the three-slot burner head., A 5-cm air-acetylene burner head is available for applications in which reduced, sensitivity is required. On many spectrometer models, it can be rotated 90° to provide, reduced sensitivity, and it has a wide slot to prevent clogging. This burner head can be used, only for air-acetylene operation., Nebulizers, To meet varying analytical requirements, several different types of adjustable nebulizers, are available. Some types are constructed from inert plastic to provide maximum chemical, resistance when highly acidic or corrosive solutions are being analyzed. The standard nebulizer,, which provides best performance with respect to minimizing chemical interferences, is, recommended for general-purpose applications. A High-Sensitivity Nebulizer is available, for applications that require maximum sensitivity and the lowest flame detection limits. The, High-Sensitivity Nebulizer utilizes an integral ceramic impact bead to enhance atomization, efficiency., All Perkin-Elmer nebulizers can be easily disassembled for cleaning, and individual parts are, available if replacement is necessary., The Standard Conditions section of this manual provides typical characteristic concentration, values for the standard nebulizer., https://abdullahsurati.github.io/bscit
Page 438 :
https://abdullahsurati.github.io/bscit, , RESEARCH PAPERS AND TECHNICAL DESCRIPTIONS, , 433, , Process Description: Natural Waters, Scope, This method describes the determination of calcium, copper, lithium, magnesium, manganese,, potassium, sodium, strontium, and zinc in natural waters, and may be applicable to other, elements., Reagents, Lanthanum solution, 5% (w/v). Prepare as described under the Standard Conditions for La., Hydrochloric acid, HCl, concentrated., Standard solutions, Prepare all standard solutions except calcium and magnesium by suitable dilutions of the, stock solutions described under the Standard Conditions for each element. For calcium and, magnesium, dilute the stock solutions with the 5% (w/v) La solution and HCl to give dilute, standards which contain 0.25% (w/v) La and 5% (v/v) HCl., Sample preparation and analysis, Filter each sample through a 0.45 micron micropore membrane filter, if necessary, to avoid, clogging of the burner capillary. Aspirate each sample directly, except for calcium and magnesium., For calcium and magnesium, dilute with 5% (w/v) La solution and HCl to give a final solution, concentration of 0.25% (w/v) La and 5% (v/v) HCl. Determine the concentration of the, element of interest by using the Routine Procedure as described in the General Information, section. Calcium and magnesium results should be corrected by using a reagent blank., Calculations, Read the concentration of the element of interest directly against the appropriate standards., Where a dilution is required, the concentration of the element of interest is calculated as follows:, Element (ug/mL) = (ug/mL in diluted solution)(volume of diluted solution in mL), (volume of aliquot taken for dilution in mL), Please refer to the companion CD for more samples of object and process descriptions., , SUMMARY, Research papers may be classified under the advanced forms of technical writing, generally taken, up by academicians and researchers. This formal, form of writing possess certain specific characteristics and include some essential components, in its structure. It is also necessary to follow certain steps in writing them. Knowledge of all these, features will enable one to write this important, document with effectiveness in order to disseminate research-related information to their readers. The importance of technical descriptions is, , also growing fast with the development of technologically advanced products. A technical description is required to understand the details of, an object or a process, and to be able to identify, the problem if something goes wrong in the functioning. Hence, one needs to keep in mind organization, content, structure, classification, and, level of detailing in order to provide a clear and, effortless description that is easy for the reader, to grasp., , https://abdullahsurati.github.io/bscit
Page 439 :
434, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , EXERCISES, 1. Read the following statements and say whether, you agree or disagree with each of them. Then, write the justification/explanation for your point, of view., (a) There is no significant difference between a, research paper and an article., (b) The title of a research paper should be selfexplanatory., (c) The language of a research paper should be, like the language of a technical proposal/, report., (d) The objective of writing a research paper is the, same as that of a technical report., (e) There is no defined order of writing different, elements of a research paper., (f) Acknowledgements should be placed at the, beginning of a research paper., (g) Informative Abstract and an Executive, Summary are one and the same type of, synopsis used in research papers., (h) A research paper contains only References, no, Bibliography., (i) The ‘Introduction’ to the research paper only, mentions the earlier relevant work., (j) The writer of a research paper should use, only standard symbols, abbreviations, and, nomenclature., , 2. What are the points you need to bear in mind, while preparing the title of a research paper?, 3. Write the technical description of word processor, following the guidelines discussed in the chapter., Also give illustrations to enhance the description., 4. In this era of technology the drawings are done, with the robot instead of hands. Write the process description of robot drawing project. Your description should include a line drawing of robot arm,, and should describe how the robot arm works in, the project., 5. Select an object from your environment and write, the technical description either individually or in, the team. You can describe any tool, mechanism,, or a piece of equipment. You should have the exact and precise description of these to write the, technical description., 6. Find examples of technical description and technical process from text books, journals, professional magazines and the Internet. Analyse them, and see how effectively they are written. If you, find any flaw, rewrite them after applying the, techniques discussed in the chapter., , https://abdullahsurati.github.io/bscit
Page 441 :
https://abdullahsurati.github.io/bscit, , CHAPTER, , 17, , OBJECTIVES, You should study the chapter, to know the, , • history and origin of words, • significance of dictionaries, , and thesauri for vocabulary, enrichment, • different ways of word, formation, • what confusables,, homonyms, homophones,, and eponyms are, • phrasal words and the, phrasal verb pattern, • how to use the following, important parts of speech:, nouns, adjectives, adverbs,, prepositions, and infinitives, • the role of gerunds and, infinitives, • subject–verb agreement in, sentences, • tenses as well as active and, passive voice, • articles and conditional, sentences, , Grammar and Vocabulary, Development, INTRODUCTION, As we have learnt throughout this book, communication is a process of, sending and receiving intricate and complicated messages in commonly, accepted language. The persons taking part in a conversation should, be competent in both written and spoken communication. To hone, these skills, the training pertaining to listening, speaking, reading,, and writing, covered in the preceding parts of this book, has become, necessary. However, the basis of all these forms of communication is, sound vocabulary and grammar., Vocabulary is important as it aids expressions and communication, with its size usually linked with reading comprehension ability., Linguistic vocabulary is synonymous with thinking vocabulary and, people are judged by others based on their vocabulary., In the same manner, it is mandatory to understand the rules of, grammar in order to formulate correct sentences., In this chapter, we will learn the basics of English vocabulary and, grammar. We will start with vocabulary building and then touch upon, the important grammatical elements of the language, explaining these, with several examples., , ’‘The grammar is faulty and spelling ridiculous; otherwise it is an, impressive résumé., https://abdullahsurati.github.io/bscit
Page 442 :
438, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , A BRIEF HISTORY OF WORDS, The basis of modern English is old English or Anglo-Saxon, a Germanic language spoken by, the invaders of the British Isles in the fifth century AD., Over the centuries, English has been influenced by the languages of many other peoples—, Scandinavian, Norman (French), and Latin., As the language has grown and developed, words have undergone transformations in their, spelling and meaning. The pronunciation of old English words differs considerably from that, of their modern equivalents. The long vowels (wherever the vowel sound is prolonged, e.g., /a:/,, /I:/, /u:/) in particular have undergone considerable modification. For example, the old English, ‘stan’ is the same as the modern English ‘stone’, ‘heafod’ is now ‘head’, and ‘sawol’ is ‘soul’. Look, at the following list of old English words and their modern versions., Old English, halig, gan, ban, rap, hlaf, , Modern English, holy, go, bone, rope, loaf, , Old English, bat, fot, cene, fyr, riht, , Modern English, boat, foot, keen, fire, right, , Over a period of time, words stopped being used in a particular context. Instead, they, would crop up in a new context. This resulted in a change of meaning. For example, the word, manuscript originally meant ‘that which is written by hand’ (from the Latin manu, ‘by hand’,, and scriptus, ‘written’), but today it refers also to material written on a typewriter or computer., Another example is the word ‘place’. Earlier, it only referred to an open square in a village or, town. Today, it covers a considerably wider range: you speak of a place in a book, and you can, put someone in his/her place. Some more examples are given below., Word, citizen, fellow, box, junk, bead, , Original meaning, city-dweller, associate, boxwood, old rope, prayer, , Word, deer, meat, lesson, liquor, , Original meaning, animal, food, reading, liquid, , There is another category of words where the meaning has become restricted. ‘Wife’ originally, meant ‘woman’ but is now restricted to a particular relation., , Closely connected with expansion and restriction of meaning is the change whereby a, concrete word has taken an abstract meaning, or an abstract term has become more concrete., An appropriate example is the word ‘humour’, which in medieval medicine was thought to, https://abdullahsurati.github.io/bscit
Page 443 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 439, , be one of the four fluids responsible for one’s health and disposition. This word now refers to, ‘temperament’ and ‘mood’, thus shifting from a concrete to an abstract meaning. The abstract, Latin word fructus (derived from the verb fruor, ‘to enjoy’) originally meant enjoyment, but, even in classical Latin, we find it frequently used in the sense of ‘profit’, ‘income,’ ‘fruit’ (as in, ‘the fruits of my labour’). Later, it became restricted to the enjoyment of tangible objects such, as apples, oranges, grapes, and pears., Through the ages, words have risen or fallen on the social scale by a process called pejoration, and amelioration. In the first instance, words that had a favourable implication may ‘degenerate’, in meaning. For example, take the words boor, churl, silly, and foolish. Originally, these words, had the following meanings:, Word, boor, churl, silly, foolish, , Original meaning, peasant, freeman, soul, blessed fool, , What a transformation! In modern English, they have acquired such negative connotations, that they are virtually banned from polite conversation., The opposite of this process, that is, amelioration and elevation of meaning also happens. Take, some commonly used adjectives, such as fond, nice, and naughty. Fond was used by Shakespeare, in the sense of foolish. Nice (origin nescius, meaning ignorant) meant stupid, but later acquired a, pleasant connotation, such as the expression ‘a nice way’, or a nice person. Naughty literally meant, ‘naught-like’, that is, worthless, and it meant only that. Later it was used in the sense of wicked, but, nowadays it has weakened to a mild term of reproach. Words keep getting added to this list, and, therefore, you should constantly attempt to expand your vocabulary., Let us now look at some of the more recent trends that the language has undergone. The, widespread use of mobile phones and short messaging service (SMS) has spawned an entirely, new ‘language’ whose purpose is to send quick messages. These messages are not based on any, rules of grammar and are created by the user as he/she sees fit. Look at the following messages:, • Hw r u?, • Hi wassup? Hw hve u been?, • Ive been bz al dis while, need 2 catch up asap!, , • Hey I g2g now. Brb, • Recd yr msg. Get bk 2 u soon., • M in ofc bk to bizness, , As the purpose is to send and comprehend quickly, these messages are usually short and, have telegraphic language. They are very specific to the individual who is involved in the, communication., Slang is another category of language, very informal in nature. It is often used by members of, a particular group, schoolboy slang, for instance, or ‘campus lingo’. Words such as sams, fundoo,, sploosh, junta, zook, and cracked are examples of campus lingo in India. A layperson might be, completely mystified hearing a student saying, ‘He went to the ski to have sams with a dayski’, (meaning ‘He went to the skylab to have samosas with a day scholar’). But the members of the, student’s group would understand this very clearly. Words and phrases belonging to this genre, are subject to fad. They come and go with equal rapidity and what was in vogue yesterday marks, you as out of touch if you use it today., Slang does not belong only to particular groups. Most people use slang, at times, to convey, humour, or sound forceful or vivid. You must be familiar with some of the following:, https://abdullahsurati.github.io/bscit
Page 444 :
440, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Slang, a blue moon, peg, never say die, mind your eye, mug up, I feel very fit, , Meaning, Slang, Meaning, rare phenomenon, in a wax, angry, drink of brandy and water, tin, money, don’t despair, on the top, moving, be careful, all serene, all right, get by heart, no go, of no use, well, A fairly recent development in India is the, widespread use of ‘Hinglish’, or the combination of, Hindi and English spoken by a wide cross section, of people. Many Indians, who are more comfortable, speaking in their own language, find it convenient to, speak this hybrid language, switching from one to, the other effortlessly. While purists may complain,, the popularity of Hinglish can be gauged by the fact, that it is now used even by reputed English-language, newspapers in India., While Hinglish is a modern phenomenon, it, would be worth remembering that many words from, native Indian languages have long been assimilated, into English and can be found in virtually all English dictionaries. For example, pyjama, jungle,, bungalow, thug., Hinglish word, desi, phirangi, junta, masti, bindaas, , Meaning, local, of Indian origin, foreign, people in general, fun, carefree, unorthodox, , Throughout history, language has continued to evolve and change in many directions. Users, of the language should be familiar with words, their usage, and meaning in today’s context. Since, words are the primary symbols of communication, you must build an extensive vocabulary. This, will enable you to become fluent writers and speakers., Vocabulary, or the words one knows, can be broadly divided into two categories: active, and passive. Words that fall into your active vocabulary are those that you know well and feel, , Learning Words by Etymology, If you learn a word by understanding its etymology, (origin and history), then you can learn a string of, words at a time. Larger dictionaries can provide you, with this information. For example, animus means, mind and it appears in words like:, , Pusillanimous—A person who lacks courage, Equanimity—When a person shows evenness of, temper, especially under stress, Magnanimous—A large-hearted person, , https://abdullahsurati.github.io/bscit
Page 445 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 441, , confident about using in your speech and writing. Our passive vocabulary consists of words that, we have heard or read and understand, but do not feel too confident about using. To increase, your active vocabulary, you must move words from your passive to your active vocabulary by, consciously using them. A dictionary will help you here greatly. You can also increase your, passive vocabulary by reading widely or watching and listening to more serious programmes on, television and radio., An even more systematic way to improve your vocabulary is to fit every new word you come, across in a pattern:, • Its grammatical class and usage, • Its exact meaning and how it relates to words, • Its etymology (or origin), with similar meanings, • Which other words it combines with • Social situations where it can or cannot be used, , USING THE DICTIONARY AND THESAURUS, A dictionary is an invaluable tool for building up your vocabulary. Often you come across a, word whose meaning you guess by its context. But you could miss out its exact meaning by a, narrow margin or by a mile. This is where a dictionary comes in handy. For example:, The institute had eight special officers patrolling (not paroling) during the ragging period., Proper study methods will ensure (not induce) good grades in college., , A dictionary will help you to use words and phrases more exactly. It will also help you, find a range of possible words for a particular situation. A dictionary lists the words of a, language in alphabetical order and gives information about their meaning, their grammar,, spelling, usage, pronunciation, their history, and so on. The degree of completeness of this, information depends upon the size and purpose of the dictionary., In a thesaurus, the words are arranged in groups that have similar meanings. It can be arranged, alphabetically or thematically. The largest thesaurus in the world is the Historical Thesaurus of the, Oxford English Dictionary. Two of the most commonly used thesauri are, • Roget’s Thesaurus of English Words and Phrases, • The Oxford American Thesaurus of Current English, , Online dictionaries are also available now where you can search for the word you require., Some well-known dictionary websites are, • www.dictionary.com, • www.yourdictionary.com, • www.onelook.com, , Some well-known dictionaries are, , • Oxford Advanced Learner’s Dictionary • Merriam-Webster, , Thesaurus, The name ‘thesaurus’ comes from a classical, Greek word meaning ‘treasury’ or ‘store’ and that, is exactly what it is: a treasure-house of words., It was invented in the mid-nineteenth century, , by Peter Mark Roget who published, in 1852, his, Thesaurus of English Words and Phrases, classified, and arranged so as to facilitate the expression of, idea and assist in literary composition., , https://abdullahsurati.github.io/bscit
Page 446 :
442, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , • Concise Oxford English Dictionary, • Webster’s New World Dictionary, • The American Heritage Dictionary, of the English Language, , • The Chambers Dictionary, • Longman Dictionary of Contemporary English, , CHANGING WORDS FROM ONE FORM TO ANOTHER, There are various methods of word formation such as blending, compounding, coinage,, borrowing, and clipping. It is only in the process of derivation where you find change in the, forms of the words. Indeed derivation is accomplished by means of a large number of small ‘bits’, of the English language. These small ‘bits’ are called affixes, such as un-, mis-, pre-, -ful, and, -less. Affixes can be divided into two categories—prefixes and suffixes. If affixes are added at, the beginning of a word (e.g., un-) these are called prefixes. Added to the end of the word (e.g.,, -ish) these are called suffixes., Derivations are used to make new words in the language and are often used to make words, of a different grammatical category from the stem. For example, the addition of the derivational, morpheme ‘-ness’ changes the adjective ‘good’ to the noun ‘goodness’. Similarly, the noun ‘care’, becomes the adjectives ‘careful’ or ‘careless’ via the derivational morpheme -ful or -less. The CD, contains tables showing how derivational affixes change the grammatical category of words,, and change words from one part of speech to another., , WORD FORMATION: PREFIXES AND SUFFIXES, New words can be formed with the help of affixes, which include both prefixes and suffixes., By using these, new words can be formed by making some modification in the root word. For, example, if the root word is ‘regulate’, you can change it to deregulation by adding two affixes—, de- (prefix) and -tion (suffix). By using prefixes and suffixes, the meaning of the word changes., As another example, if you consider the word ‘easy’, you can see how the prefix un- changes the, word to uneasy and the suffix -ness further changes it to uneasiness. After becoming aware of, this pattern of word formation, you can easily learn new words, thus enhancing your vocabulary., The prefix need not have any meaning in isolation but, in some cases, it has a meaning. For, example, the prefix man- in manmade, manhole, manhandle, and manhood has a meaning. Man can, also be used as a suffix as in clergyman, fireman, etc. Though the prefix dis- has a meaning not/the, opposite of in isolation, it does not act as a prefix in words such as distribute, distinguish, disturb, and, district. But when used as a prefix in words like disappointment, it changes the meaning of the, word a great deal. Disinterested, disapprove, and disadvantage are some other examples., Let us now see some examples of suffixes that change the word class. The suffix -able added, to the verbs read, work, and suit changes them into the adjectives readable, workable, and, suitable. Likewise, the suffix -ly added to the adjectives slow, personal, and quick converts them, into the adverbs slowly, personally, and quickly; the suffix -ion added to the verbs infect, expedite,, and complete changes them into the nouns infection, expedition, and completion., Many words used in the English language today are not originally English and are borrowed, from other languages. Therefore, it would be useful to know the etymology of the suffix and, prefix. For example, the Latin word septa means ‘seven’ and when we say septuagenarian, we, mean someone in his seventies (in terms of age)., A large number of English words have Latin or Greek origins. It is interesting to note that the, three words, affixes, suffixes, and prefixes, themselves are also different combinations of the same, concept with its base as -fix. Some examples of prefixes and suffixes are provided in the CD., https://abdullahsurati.github.io/bscit
Page 447 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 443, , SYNONYMS AND ANTONYMS, In any kind of writing, the choice of words is very important. If you use the same word several, times, it becomes monotonous. To break this monotony, it is a good idea to use synonyms. It is, believed that no two words have exactly the same meaning; however, they can be interchangeably, used. A word can be substituted with its synonym only if it is the same part of speech. You must, have complete knowledge of the meaning and categorization of the word. A few examples, given below show the same category of synonyms:, • entertainment and amusement (noun), • broaden and widen (verb), , • slowly and leisurely (adverb), • enticing and tempting (adjective), , Synonyms, A synonym is word or expression that has the same or nearly the same meaning as another, in the same language. Words that are synonyms are said to be synonymous. If you talk about a, long time or an extended time, long and extended become synonyms. In, the figurative sense, two words are often said to be synonymous if they, The word good has, have the same connotation. For example, dark is synonymous to gloomy as, nineteen synonyms., merry is to happiness., Synonyms can be any part of speech (e.g., nouns, verbs, adjectives, adverbs, or prepositions),, as long as both members of the pair are the same part of speech. More examples of English, synonyms are given below:, •, •, •, •, , Beaker and receptacle (noun), Opening and aperture (noun), Wash and clean (verb), Beautiful and attractive (adjective), , • Saturnine and woebegone (adjective), • Quickly and rapidly (adverb), • In and into (preposition), , Synonyms are defined with respect to certain senses of words; for instance, pupil as the ‘aperture, in the iris of the eye’ is not synonymous with student. Similarly, the word expired meaning ‘having, lost validity’ (as in medicines) does not necessarily mean death. The word usage is very important., Even words similar in meaning like close and shut may have slightly different nuances. ‘Closing a, shop’ implies that the shop is no longer operational and no one can do the business. But ‘shutting, the shop’ means the shop is being made secure so that nothing can be taken out., It is an accepted fact that no synonyms have, exactly the same meaning because of several, reasons such as etymology, orthography, phonic, qualities, ambiguous meanings, and usage. Only, in some situations, the synonyms identical in, meaning can be interchangeably used for practical, purposes. Different words that are similar in, meaning usually differ for a reason; for example,, feline is more formal than cat. Long and extended, are only synonyms in one usage and not in others,, such as a long arm and an extended arm; in isolation,, long and extended are very different in meaning., Synonyms are also a source of euphemisms., When, you want to say ‘he died’, you will use the, ‘Kailash, I’m Shankar and this is Shiva.’, https://abdullahsurati.github.io/bscit
Page 448 :
444, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , expression ‘he passed away’. A thesaurus offers a listing of similar or related words; these are, often, but not always, synonyms. A close synonym of strong is muscular, but it places much more, emphasis on physical strength. By contrast, stalwart and staunch are synonyms that emphasize, more abstract aspects of this meaning of strength. Synonyms can sometimes be group of words,, as in gain and get one’s hands on., Even if a word has innumerable synonyms, it is not necessary that the word in a given, context can be substituted by a synonym. The following example makes it clear:, Example Alleviate, Synonyms: abate, allay, assuage, mitigate, relieve, temper, To alleviate is to make something easier to endure (alleviate the pain following surgery); allay, is often used interchangeably, but it also means to put the rest, to quiet or calm (to allay their, suspicions). Assuage and allay both suggest the calming or satisfying of a desire or appetite, but, assuage implies a more complete or permanent satisfaction (we allay our hunger by nibbling, hors d’oeuvres, but a huge dinner assuages our appetite). To relieve implies reducing the misery, or discomfort to the point where something is hearable (relieve the monotony of the crosscountry car trip) and mitigate, which comes from a Latin word meaning ‘to soften’, usually, means to lessen in force or intensity (mitigate the storm’s impact). Abate suggests a progressive, lessening in degree or intensity (her fever was abating). To temper is to soften or moderate (to, temper justice with mercy), but it can also mean the exact opposite—to harden or toughen, something (tempering steel; a body tempered by lifting weights)., For more examples, refer to the CD., , Antonyms, Antonyms are the word pairs that are opposite in meaning such as dark and light, tall and short,, and acme and abyss. Words may have different antonyms depending on the meaning. Both long, and tall are antonyms of short. There are different kinds of opposites as discussed below., Absolute Such antonyms have no comparison or with no middle ground, e.g. true and false., Logically, a statement is either true or false; it cannot be slightly true or rather false., Gradable These are the opposites with gradations of meaning, e.g. hot and cold; it makes, sense to say something is rather hot or very cold. There are many words to represent intermediate, stages of hot and cold, such as tepid, cool, and warm. So, hot and cold are at opposite ends of a, continuum, rather than being absolutes., Relational The pairs such as buy and sell, pedagogue and protégé, where the relationship, between the two objects is described, fall in this category., Auto These are the words that mean opposite in different contexts such as wind up (close,, start), fast (quick movement, fixed firmly), stay (at a specific place, postpone), out (visible,, invisible), and cleave (to split, to adhere)., Languages often have ways of creating antonyms as an easy extension of lexicon. Examples, are the English prefixes dis- and un-. Respect is the antonym of disrespect and comfortable is of, uncomfortable. The CD gives a list of antonyms., , IDIOMS, An idiom is a phrase whose meaning is difficult or sometimes impossible to guess by looking, at the meanings of the individual words it contains. For example, the phrase ‘(being) in the, same boat’ has a literal meaning that is easy to understand, but it also has a common idiomatic, meaning. Consider the following sentence:, https://abdullahsurati.github.io/bscit
Page 449 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 445, , I found the job difficult at first. But we were all in the same boat; we were all learning., , Here, (being) in the same boat means ‘to be in the same difficult or unfortunate situation’., Some idioms are imaginative expressions such as proverbs and sayings:, Too many cooks spoil the broth., , The expression means that if too many people are involved in something, it will not be well, done. If the expression is well known, part of it may be left out:, Well I knew everything would go wrong— it’s the usual story of too many cooks!, , Other idioms are short expressions that are used for a particular purpose:, Hang in there! (used to encourage somebody in a difficult situation), Get lost! (a rude way of saying ‘go away!’), , Many idioms, however, are not vivid in this way. They are considered as idioms because their, form is fixed:, • for certain , • in any case, The CD provides a listing of popularly used idioms., , CONFUSABLES, The term ‘confusable’ or ‘confusible’ is a semi-technical term for one of two or more words that, are commonly or easily confused with one another, e.g., luxuriant with luxurious; they’re with there, and their. The British lexicographer Adrian Room (Dictionary of Confusing Words and Meanings,, 1985) separates confusibles or ‘lookalikes’ such as dominating and domineering from distinguishables, or ‘meanalikes’ such as faun and satyr. At least seven factors contribute to confusion:, , 1. Homophony, in which words have the same sound but different spellings and meanings:, slay, sleigh., 2. Homography, in which words have the same spelling, but different sounds and meanings:, wind moving air, wind to turn or twist., 3. Shared elements: mitigate and militate share the same number of syllables, the same stress, pattern, and the same opening and closing syllables., 4. Transposable or exchangeable elements: cavalry and Calvary, form and from, accept and, except. Factors 3 and 4 become more potent still when words have similar meanings and, uses: affect and effect., 5. Words mistaken for phrases or vice versa: already and all ready., 6. Semantic proximity: baroque and rococo, nadir and zenith. In this case, confusion may be, encouraged by different but related applications of the same terms by different people:, acronym and initialism, subconscious and unconscious. Some words are very different in, meaning but sometimes displace one another because of close association: acid and, alkali, defendant and plaintiff., 7. Uncertainty arising from different uses in different varieties of English: biscuit and cookie in, British English and American English., , Look at the following example illustrating the wrong usage of words:, , A boy of twelve is in intensive care in hospital after a group of teenagers doused him in inflammatory liquid and, then threw a lit match at him., , Here the writer meant inflammable, capable of being set on fire, not inflammatory, tending, to stir up trouble., https://abdullahsurati.github.io/bscit
Page 450 :
446, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , The CD provides lists of frequently confused homophones, as well as several words that are, commonly confused, with a summary of their main meanings., , ONE-WORD SUBSTITUTES, Often we have words on the tip of our tongue, and we all know how hard it is sometimes to, remember the exact word appropriate to a certain situation or object. The following is a list of, some such words. The entries are listed under the key concept. The list is arranged alphabetically, with respect to the key concepts., Act, , Act on another’s behalf: represent, Abroad, Sell abroad: export, Absence, Employee’s statement that his/her absence was due to illness: self-certification, Acupressure, Spot where pressure is applied: acupoint, Aircraft, Aircraft’s main body: fuselage, Belt, Belt attachment to hold a sword: frog, Beyond, Beyond what is necessary: supererogatory, Broadcast, Unscheduled broadcast of important news: newsflash, Clean, Sterilize food by gamma radiation: irradiate, Computer hardware, Hardcopy describing the uses and design of hardware: documentation, Concrete, Concrete layer under a building: oversite, raft, Direction, Designed to operate in a particular direction: directional, Disease, Indication of a disease: symptom, stigma, Preventing disease: prophylactic, Enjoy, Enjoy without hurrying: savour, Enlarge, Enlarge by internal stretching: distend, https://abdullahsurati.github.io/bscit
Page 451 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , Exchange, Mutual exchange: reciprocity, False, Writings whose authorship is falsely assigned: pseudepigrapha, Fee, Fee paid to recompense someone doing ‘unpaid’ work: honorarium, Filter, Filtration process for blood of a patient suffering kidney failure: dialysis, Glacier, Material deposited by a glacier: moraine, Gravity, Fall controlled by gravity only: free fall, Grid, Grid for data display: matrix, Heat, Heat and then cool slowly as a toughening process: anneal, Decompose by exposure to extreme heat: pyrolyse, Hope, Denoting a hope unlikely to be fulfilled: pious, vain, Identity, Item habitually seen with a person or thing, and serving to identify them: attribute, Information, Alter information to make it more acceptable: launder, Internet, Proper way to use the Internet: netiquette, Joint, Flat ring sealing a joint: gasket, washer, Lathe, Person working wood on a lathe: turner, Lens, Counterbalanced camera platform that can be raised or turned: crane, Light, Use of light for medical treatment: phototherapy, Map, Ratio between actual and mapped distances: scale, Meaning, Study of meaning: semantics, Medication, Denoting the application of medication through skin: transcutaneous, transdermal, Night, Night blindness: nyctalopia, , https://abdullahsurati.github.io/bscit, , 447
Page 452 :
448, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Notice, Accidental failure to notice: oversight, Number, Fixed or permitted number: quota, Office, Period of holding office: tenure, Origin, Study of the origin of names: onomastics, Paper, Role of paper for continuous printing: web, Plastic, Overlay with plastic: laminate, Quality, Assessed by quality: qualitative, Radar, Metal foil released to evade radar detection: chaff, window, Record, Collection of documents or records: archive, registry, Remove, Remove from a dangerous place: evacuate, Satellite, Satellite’s communication link with earth: downlink, Scent, Perforated container for sweet-smelling substances: pomander, Sea, Mapping of seas: hydrography, Telephone, Direct telephone line for emergency use: hotline, Temperature, Excessively low body temperature: hypothermia, Theory, Supporter of a theory: advocate, exponent, proponent, protagonist, University, Former university student: alumnus, Valve, Externally operated valve regulating flow through a pipe: stopcock, Vehicle, Weighing apparatus for vehicles: weighbridge, https://abdullahsurati.github.io/bscit
Page 453 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 449, , Vibration, Strong vibration: judder, Wall, Recess in a wall: alcove, niche, Water, Irrational fear of water: hydrophobia, Wind, Revolving pointer showing wind direction: weathercock, weathervane, X-rays, Screen for direct viewing of X-ray images: fluoroscope, Yield, Policy of yielding to the demands of a potential aggressor: appeasement, Zigzag, Zigzag course taken by a vessel sailing into the wind: tacking, traverse, , HOMONYMS, A homonym is a word that has both the same pronunciation and the same spelling as another,, but is etymologically unrelated to it. The following are a few examples of homonyms:, • bill (statement of charges): bill (beak), • fair (just): fair (sale, entertainment), • pole (long slender rounded piece of wood or metal): pole (each of the two points in the, celestial sphere about which the stars appear to revolve), • pulse (throbbing): pulse (edible seeds), • row (noun, a line): row (verb, propel boat), • soil (earth): soil (make dirty), Traditionally, homonyms of this type are treated as separate words and given distinct, dictionary entries (e.g., ‘pole 1’ and ‘pole 2’) whereas more closely related meanings are treated as, offshoots of the same word, which historically speaking they are (so ‘Each of the two terminals, of an electric cell or battery etc.’ comes under ‘pole 2’)., Popularly, homonyms may or may not include pairs whose two words have the same meaning, but do not belong to the same grammatical category (e.g. red, noun, and adjective)., Loosely, homonym is sometimes used for a word that has either the same sound or the same, spelling as another (but not both). The CD provides a list of common homonyms., , HOMOPHONES, A homophone is a word that is pronounced the same as another. This term is usually used, for partial homonyms, which are distinguished by both meaning and spelling. Examples of, homophones are, feat: feet, no: know, none: nun, stare: stair, Some English pairs are homophones in some accents but not in others, for example:, saw: sore, pore: pour, wine: whine, The occurrence of homophones is largely a matter of historical chance, in which words, with distinct meanings come to coincide phonologically: byre—a cowshed, buyer—one who, https://abdullahsurati.github.io/bscit
Page 454 :
450, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , buys. Words may be homophones in one variety of English but not another: father/farther and, for/four are homophonous in received pronunciation (the standard form of British English, pronunciation, based on educated speech in southern England, widely accepted as a standard, elsewhere), but not in American English and Scottish English; wails/Wales are general, homophones; wails/Wales/whales are homophones for many, but not in Irish English and, Scottish English. Whether/whither are homophones in Scotland, but not whether/weather,, which are homophones in England. The CD provides a basic list of homophones., , EPONYMS, An eponym is a person or thing, or the name of a person or thing, after whom something is, named, such as a building, an institution, an organization, a machine, a product, or a process., The following are a few examples of eponyms:, Alzheimer’s disease, Braille, diesel, mackintosh, Morse code, sandwich, stetson, , from Alois Alzheimer (1864–1915), German neurologist, from Louis Braille (1809–52), French inventor, from Rudolf Diesel (1858–1913), German engineer, from Charles Macintosh (1766–1843) (with a change of spelling), from S. F. B. Morse (1791–1872), American inventor, from the 4th Earl of Sandwich (1718–92), from John B. Stetson (1830–1906), US hat manufacturer, , An eponym is also the person whose name is used as follows: The Roman emperor, Constantine, who gave his name to Constantinople., The adjective eponymous is used in the following way:, , • Beowulf is the eponymous hero of the Old English poem of that name., • Emma is the eponymous heroine of the novel Emma by Jane Austen., • Robinson Crusoe is the eponymous hero of The Life and Strange and Surprising Adventures, of Robinson Crusoe by Daniel Defoe., , The process of eponymy results in several forms:, , • Simple eponyms such as atlas, which became popular after the sixteenth century Flemish, cartographer Gerardus Mercator put the figure of the titan Atlas on the cover of a book, of maps., • Compounds and attributive constructions such as loganberry, after the nineteenth, century US lawyer James H. Logan, and Turing machine after the twentieth century, British mathematician Alan Turing., • Possessives such as Parkinson’s Law, after the twentieth century British economist C., Northcote Parkinson, and the Islets of Langerhans, after the nineteenth century German, pathologist Paul Langerhans., • Derivatives such as bowdlerize and gardenia, after the eighteenth century English, expurgator of Shakespeare, Thomas Bowdler, and the nineteenth century ScottishAmerican physician Alexander Garden., • Clippings such as dunce from the middle name and first element of the last name of the, learned thirteenth century Scottish friar and theologian John Duns Scotus, whose rivals, called him a fool., https://abdullahsurati.github.io/bscit
Page 455 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 451, , • Blends such as gerrymander, after the US politician Elbridge Gerry (born 1744), whose, redrawn map of the voting districts of Massachusetts in 1812 was said to look like a, salamander, and was then declared a gerrymander. The word became a verb soon after., , PHRASAL VERBS, A phrasal verb is a short phrase made up of a verb and one or two prepositions or adverb. Each, phrasal verb has its unique meaning(s), which is different from the meaning(s) of the verb, itself. For example, the meanings of ‘take’, ‘take in’, and ‘take up on’ are totally different. In other, words, phrasal verbs are verbs with particles. A common example is the verb ‘to fix up’ as in, ‘He fixed up the car’. The word ‘up’ here is a particle, not a preposition, because its position can, be changed: ‘He fixed the car up.’ These movements of the particle ‘up’ quickly distinguishes it, from the preposition ‘up’., Phrasal verbs are different from verbs with helpers. The particle that follows the verb changes, the meaning of the phrasal verb in idiomatic ways. Some particles can be separated from the, verb so that a noun and pronoun can be inserted, and some particles cannot be separated from, the verb. In addition, some phrases are intransitive, meaning they cannot take a direct object., • Separable ‘add up’ (meaning: to add), , She added up the total on her calculator. (Correct), She added it up on her calculator. (Correct), • Inseparable ‘get around’ (meaning: to evade), , She always gets around the rules. (Correct), She always gets the rules around. (This construction makes no sense in English.) (Incorrect), • Intransitive ‘catch on’ (meaning: to understand), After I explained the math problem, she began to catch on. (Correct), She began to catch on the math problem. (Catch on cannot take a direct object in this, meaning.) (Incorrect), She began to catch on to the math problem. (the word ‘to’ makes the math problem an, indirect object, which is acceptable in this meaning.) (Correct), , Phrasal Verb Patterns, A phrasal verb is a combination of either prepositions or adverbs, or both. It may also combine, with one or more pronouns or nouns., , Particle verbs, Phrasal verbs with adverbs resembling a preposition are sometimes called particle verbs. These, are related to separable verbs. Basically, there are two main patterns in this: transitive and, intransitive., • An intransitive particle verb does not have any object. For example:, , When he entered the room I looked up., , • A transitive particle verb has a nominal object in addition to the adverb. Here one thing, should be taken care of—that if the object is an ordinary noun, it can usually come on, either side of the adverb, though very long noun phrases tend to come after the adverb,, as in the third example given here:, Switch off the light., , https://abdullahsurati.github.io/bscit
Page 456 :
452, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Switch the light off., Switch off the lights in the corridor outside the room., , However, with some transitive particle verbs, the noun object must come after the adverb., In these cases ‘inseparable’ phrasal verbs are involved. For example:, The hot balloon gave off the fumes. (not The hot balloon gave fumes off.), , Still there are transitive particle verbs that require the object to precede the adverb. For example:, They let the lady through. (not They let through the lady.), , In all the transitive particle verbs, if the object is a pronoun, it must precede the adverb. for, example:, Switch it off. (not Switch off it.), , They let her through. (not They let through her.), , Prepositional verbs, Phrasal verbs with a preposition are called as prepositional verbs. These verbs are always followed, by their nominal object and are different from transitive particle verbs because the object still, follows the preposition if it is a pronoun. For example:, We look after our children., , We look after them. (not look them after), , When a verb has its own object, it usually precedes the preposition. For example:, He helped Namita to an extra portion of apples., He helped her to some. (with pronouns), , Prepositional verbs with two prepositions are possible. For example:, Sahil talked to his mother about his new bike., , Phrasal prepositional verbs, A phrasal verb can be combination of both an adverb and a preposition at the same time. the, verb itself can have a direct object. For example:, The novice driver got off to a flying start. (no direct object), Onlookers put the accident down to the driver’s loss of concentration. (direct object), , The CD lists of few common phrasal verbs. The CD also provides a list of technical, vocabulary, common errors in usage, commonly misspelt words, and British words along with, their American equivalents., , Some Pointers to Good Word Usage, 1. Be positive We all have a ‘passive vocabulary’—, words we know but never use. There are also, words we have read or have a vague idea about., Try shifting these words into the vocabulary that, you are familiar with and use., , 2. Dictionary and Thesaurus These are invaluable, tools. Use a dictionary to check the meanings, of words. Make sure you can use it easily and, confidently. A thesaurus will give you all the, options to a word, so that you can choose the, best one for the occasion., , https://abdullahsurati.github.io/bscit
Page 457 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 3. A wide choice Remember, English gives you, several choices of words for a single meaning., When you write, do not opt for the first word that, comes to mind. Make an effort to think of other, words. Use a thesaurus to help you in your work., 4. Who is your audience? When speaking or, writing, always keep your audience in mind., Communication is a two-way street. Use words, that are in keeping with your audience’s level of, language skills and their knowledge of the subject., 5. Social setting Do you have an informal or formal, relationship with your audience? Words that suit, one social setting could be disastrous in another, and ruin your communication, however accurate, your language may be. Choose your style of, speaking or writing according to the occasion., 6. Jargon Unless your target audience is in the, know, jargon tends to put off people. Avoid it., 7. New words Just as words fall into disuse and, vanish from the language, new words are, constantly being added. Some words will last, , 453, , and become widely used; others will fade away., While it is interesting to try out new words, be, wary of trying to sound ‘fashionable’ all the time,, or you will end up looking ridiculous., 8. Sentence construction Learn how words work, in sentences before you can start developing, your vocabulary. This will greatly benefit you,, especially in writing., 9. Understand word structure Many words have, common ‘building blocks’—try to figure out, how these work. Also try to understand how, common prefixes and suffixes are used in, constructing new words., 10. Enjoy the language! English is an amazingly, creative, flexible language, capable of, assimilating various influences and expressing, subtleties of thought. As Thomas Carlyle said, ‘Be, not the slave of words’. Do not let words scare, you—rather, get a hold on them and enjoy using, them in your speaking and writing., , NOUNS, Noun is defined as a word used for a name of a person, place, thing, or idea. In English, it is, one of the eight parts of speech. It is further classified as common, countable/uncountable,, concrete/abstract, collective, proper, gerund, and compound., 1. The common noun names general things such as city, country, chair, car, dog, etc. Common, nouns are general names and are not capitalized unless they begin the sentence or are, part of a title., 2. The nouns that refer to things which can be counted are countable nouns. They are easy, to recognize. For example, we can count pens, chairs, people, dogs, cats, etc. They can be, singular or plural. When they are singular, we must use a/an/the/my/this. For example,, , I want an apple., , or, , Where is my pen?, , When countable nouns are plural, we can use them alone. For example,, I want apples., , , , or, , Pens are lying on the table., , 3. Uncountable nouns refer to items, concepts, etc. that cannot be divided into separate, elements. These are further classified as concrete and abstract nouns. Examples of concrete, nouns are iron, rice, and furniture. You can experience this group of nouns with your five, senses: you see them, hear them, smell them, taste them, and feel them. For example,, , Ramya licked the ice cream., , https://abdullahsurati.github.io/bscit
Page 458 :
454, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Here ice cream is a concrete noun. We can see the pink colour. We can taste the vanilla, flavour. We can feel our tongue growing numb from the cold. Any noun that one can, experience with at least one of the five senses is a concrete noun. Whereas, we cannot, experience abstract nouns in the same way as concrete nouns. For example, concentration,, homework, and freedom. We cannot see the colour of concentration, we can neither, taste it, nor hear it., 4. Nouns that refer to group of people or things are collective nouns. Collective nouns, are different names given to collections or groups, be they birds, animals, or things. For, example, committee, crowd, army, navy, conglomeration, and family., 5. Nouns that refer to specific people, organizations, or places are proper nouns. A proper, noun has two distinctive features: (a) it will name a specific item, usually a one-of-a-kind, and (b) it will begin with a capital letter no matter where it occurs in a sentence. For, example, France, America, Kolkata, Ashok, and Indian Space Research Organization., 6. Nouns that are formed from a verb by adding ‘ing’ are called gerund nouns. It can follow, a preposition, adjective, or most often a verb. For example,, I love dancing., I love participating in drawing competitions., , 7. Nouns that are made up of two or more words are called compound nouns. These nouns, are explained in detail in the following section., , Compound Nouns, Compound nouns are formed by nouns modified by other adjectives or nouns. For example,, toothpaste is a compound noun formed by two nouns. Black bird has black as an adjective, and bird as noun. In both these examples, the first word modifies or describes the second, word, telling us what kind of object or person it is, or what its purpose is. And the second part, identifies the object or person in question. Other examples are as follows:, Weekly magazine, , adjective + noun, , Swimming pool, , verb + noun, , Underground, , preposition + noun, , Haircut, , noun + verb, , Hanger-on, , noun + preposition, , Dry washing, , adjective + verb, , Input, , preposition + verb, , A compound noun can be formed by just putting the word side by side, e.g., bedroom, or, putting a hyphen, such as check-in, and also by separating them with a single space, such as, full moon., , Noun Phrases, A noun phrase has as its, head a noun, pronoun,, nominal adjective, or a, numeral., , There are five types of phrases, which are named after the part of speech, that is the head of the phrase. They are noun phrase, verb phrase, adjective, phrase, adverbial phrase, and prepositional phrase. The noun phrase is the, nucleus of every sentence. A noun phrase can have infinite length as well, as any number of other phrases, e.g., adverb, adjective, and noun within, its syntactical structure., https://abdullahsurati.github.io/bscit
Page 459 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 455, , A noun phrase has as its head a noun, pronoun, nominal adjective, or a numeral. For example,, ‘flowers’, ‘they’, and ‘the flowers’ are noun phrases, but ‘flower’ is just a noun, as is indicated in, the following sentences (the noun phrases are italicized):, Question:, , Does he like flowers?, , Answer:, , Yes, he likes them., , Question:, , Do you like the flowers over there?, , Answer:, , Yes, they are beautiful., , Question:, , Do you like the flowers that bloom in my garden?, , Answer:, , Yes, I like them. (Note: Here, ‘them’ refers to ‘the flowers’, not ‘flowers’.), , Question:, , Do you also like the pink coloured flower?, , Answer:, , Yes, I like it., , Some noun phrases consist of only one word like the noun flowers (in the first question) and, the pronouns it, them, and they. But most noun phrases have more than one word., A noun phrase comprises a noun (obviously) and any associated modifier. For example,, • The tortuous and meandering road, • A black car, • Any related report, , Different types of modifiers of a noun are given below:, Determiners:, Possessives:, Adjectives:, Prepositions:, Clauses:, , The scientist assembled the machine., She brought the machine’s parts., The cumbersome machines are kept underground., The pedestrians over the bridge …, The conference we went to …, , The noun phrase formed by modifiers can be in different forms and combinations. For, example, the brilliant and assiduous scientist (adjectival), the boundary following the edge of, the college premises (participial), the first woman to walk in space (infinitive), the interview that, he had given the day before (modifying clause), and the motel next to the supermarket over the, bridge (prepositional)., The possible functions of a noun phrase are given below:, The subject:, The object:, The complement:, Possessive:, The object of a preposition:, , The magnificent aircraft soared upwards., I saw that movie about buccaneers., She dreams of being an engineer., My husband’s grandfather was a professor., He jumped over the wall., , If you look closely at any sentence, you will find many noun phrases that contribute to the, length and profundity of the sentence. For this reason, it is necessary to, You can identify a noun, know noun phrases and their structure., phrase by observing all the, You can identify a noun phrase by observing all the words that are, words that are contiguous, contiguous, with the noun itself. But sometimes, the noun phrase can be, with the noun itself., broken up to become discontinuous. You will also find that a part of the noun, https://abdullahsurati.github.io/bscit
Page 460 :
456, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , phrase is placed at the end of the sentence (usually, modifying phrases—participial or prepositional), so that it receives more attention. See the sentence given below:, Recently, innumerable rallies have been reported involving the hoi polloi to have turned into imbroglios., , The entire noun phrase can be put together: ‘That innumerable rallies involving the hoi polloi, have turned into imbroglios have been reported recently.’ However, shifting the modifying phrases,, the bold italicized part of the phrase, to the end of the sentence puts additional emphasis on, that part. Some more examples are given below., A rumour spread among the students that the exams are being postponed till June. (instead of ‘A rumour that, the exams are being postponed till June spread among the students.’), , The time had come to start working on the project seriously and to involve more people for making it successful., (instead of ‘The time to start working on the project seriously and to involve more people for making it successful, had come.’), , Sometimes, you will find the noun phrase as a long compound phrase. Such a noun phrase, is called a stacked or packed noun phrase. Many a time, one noun modifies another as in head, student, story book, and water bodies. But by creating a long thread of attributive nouns or, modifiers, we sometimes make things difficult, as shown in the following sentence:, Students who develop webpages would be familiar with what is now known as the uniform resource locator, protocol problem., , The difficulty here is to understand what is modifying what. Also, as you keep expecting the, string to end, the energy of the sentence dwindles into a series of false endings. Such phrases, are a particular temptation in technical writing. You can improve the sentence by identifying, the extended compound noun phrase and then removing the last noun series and converting, one of the modifying nouns into a prepositional phrase as shown below:, , The problem with the protocol of uniform resource locators is now recognized by students who develop, webpages., , So, in this situation, making a sentence longer is probably an advantage as it simplifies the, complex original sentence., , GERUNDS, Any verb with the -ing form used as a subject of a verb and acting like a verb-noun is called a, gerund. Read this sentence:, Meditating is her favourite kind of relaxation., , Meditating is formed by adding -ing to the verb meditate. Some more examples of gerund, are given below:, Poaching is a prohibited activity in India., , Gerund is the form of the, verb that ends in ‘-ing’ and, has the force of a noun and, a verb., , In the above sentences, the gerund, like a noun, is the subject of a verb, and, like a verb, also takes an object; hence, it indicates that the gerund, also has the force of a verb., I love singing classical songs., , In this sentence, the gerund, like a noun, is the object of a verb and, like a verb, also takes an, object, thus indicating that it also has the force of a verb., https://abdullahsurati.github.io/bscit
Page 461 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 457, , Finally, the gerund, like a noun, can be governed by a preposition and, like a verb, also takes, an object as in the following sentence:, He has a penchant for listening to melodious songs., , Compound gerund forms are formed by keeping a past participle after the gerunds of have, and be. Some sentences of compound gerund forms are given below:, Having worked for ten hours, he felt sleepy., , She was angry about not having been invited., He loves being appreciated., , The gerund of a transitive verb has the following forms:, Active Passive, Present: steering, Present: being steered, Perfect: having steered, Perfect: having been steered, As both the gerund and the present participle end in the -ing form, be careful to discriminate, between them. A verbal noun is the gerund that has the force of a noun and a verb, whereas, the, verbal adjective has the present participle that has the force of an adjective and a verb., , Examples of gerund:, Smoking is bad for health., The child was tired of swimming., We were stopped from watching the match., , , Examples of participle:, , He is smoking too much these days., He was swimming when I saw him., She was watching the match when her phone rang., , In the compound nouns dancing-shoes, frying-pan, and writing-table, dancing, frying, and, writing are gerunds. They mean ‘shoes for dancing’, ‘a pan for frying’, and ‘a table for writing’,, respectively., Remember to use the possessive case of nouns and pronouns before gerunds, as in the, following sentences:, They celebrated at his being promoted. (not him), Always use the possessive, I heard of their having shifted to another town. (not them), case of nouns and, pronouns before gerunds, , We have no trust in his keeping his promise., Why do you insist on her being present?, , All plans depend on Sona’s passing the entrance examination., The mishap was due to the pilot’s ignoring the signals., , Uses of Gerunds, A gerund being a verb-noun may be used as the following:, • Subject of a verb:, • Object of a preposition:, , Smoking is bad for health. I am tired of writing., , Reading is his favourite pastime. He is fond of singing., • Object of a transitive verb: He was put behind bars for telling a lie., Stop talking., • Complement of a verb:, Girls love making dolls. Doing is learning., I love reading serious stories. What is most detested is drinking., https://abdullahsurati.github.io/bscit
Page 462 :
458, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , INFINITIVES, An infinitive is a kind of noun with some features of the verb, especially that of taking an object, (when the verb is transitive) and adverbial qualifiers. In short, the infinitive is a verb-noun. Read, the following sentences:, She never finds fault with me. (finite verb), , She never tries to find fault with me. (verb infinitive), , In the first sentence, the word finds has she for its subject; hence, the verb find is restricted, by person and number. You call it a finite verb (all verbs in the indicative, subjunctive, and, imperative moods are finite, as they are restricted by the person and, number of their subject). In the second sentence, to find merely names, Though the word ‘to’ is, the action denoted by the verb find and is used without mentioning any, frequently used with, the infinitive, it is not an, subject. It is thus not limited by person and number as a verb that has a, essential part or sign of it., subject and is, therefore, called the verb infinitive or simply the infinitive., Read the following sentences:, To err is human. (Here the infinitive, like a noun, is the subject of the verb is.), , Girls love to dance. (The infinitive here, like a noun, is the object of the verb love.), To respect our elders is our moral responsibility. (Though the infinitive, like a noun, is the subject, of the verb is, it, like a verb, also takes an object.), She refused to obey the rules. (In this sentence, the infinitive, like a noun, is the object of the verb, refused and, like a verb, also takes an object.), Many people desire to make wealth quickly. (The infinitive, like a noun, is the object of the verb, , desire, but, like a verb, also takes an object and is modified by an adverb.), Though the word to is frequently used with the infinitive, it is not an essential part or sign of, it. Thus, after certain verbs (bid, let, make, need, dare, see, hear, etc.), we use the infinitive without, to as shown in the following sentences:, Bid him goodbye., Let them play., I will not let you sleep., Make him do his homework., I need not go there., , You need not wait for him., You dare not watch it., He saw me do it., I heard her shout., , The infinitive without to is also used after the modal auxiliary verbs shall, will, should, would,, may, might, must, can, and could., , , You shall come. (You will be compelled to come.), , , , I will study. (I am determined to study.), , , , He may leave. (He is at liberty to leave; He is permitted to leave.), , , , You must attend the class. (You are ordered to attend the class.), , , , I can dance. (I am able to dance.), , The infinitive without to can also be used after had better, had rather, would rather, sooner than,, and rather than. See the following sentences:, She had better come seek permission., He had rather write than read., I would rather live than die., , https://abdullahsurati.github.io/bscit
Page 463 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 459, , Uses of Infinitives, The infinitive, with or without adjuncts, may be used like a noun as discussed below:, • As the subject of a verb:, , • As the object of the preposition:, , To point mistakes is easy. I had no alternative but to experiment., To practise regularly is important. The company had no choice except to file for, • As the object of a transitive verb: bankruptcy., I do not mean to hurt., • As an objective complement:, It’s beginning to rain. , Mother wanted him to study., , • As the complement of a verb:, , Her most cherished dream is to write., Her habit is to walk daily. , When an infinitive is used, as a noun, it is called the, ‘simple infinitive’., , When an infinitive is used as a noun, it is called the simple infinitive. The, infinitive is also used as follows:, , • To qualify a verb, usually to express, , • To qualify a noun:, , , purpose: This is not the time to cook., , He called to see the programme. (for the She will have cause to regret., , purpose of seeing the programme) He is a person to be adulated., We breathe to live. (purpose), • To qualify a sentence:, I came to see her off. (purpose) To share my feelings, I often remember you., It upset him to find that a theft had taken He was horrified to hear the news., place in the house. (cause), • To qualify an adjective:, Mangoes are good to eat., That horse is hard to catch., The girls are anxious to dance., My mother is too ill to do any household chores. , , In these uses, the infinitive is called the gerundial or qualifying infinitive. In the first two, groups of sentences, the gerundial infinitive does the work of an adverb; in the third group, it, does the work of an adjective; and in the fourth group, it is used absolutely., An infinitive may be active or passive. When active, it may have a present and a perfect form,, may merely name the act, or may represent progressive or continued action., , Active, Present: to write, Perfect: to have written, Present continuous: to be writing, Perfect continuous: to have been writing, When passive, the infinitive has a present and a perfect form., , Passive, Present: to be written, Perfect: to have been written, You will see that the infinitive and the gerund are similar in being used as nouns, while still, having the power that a verb has of governing another noun or pronoun in the objective case., Therefore, gerund is the form of the verb that ends in -ing and has the force of a noun and a verb., Both the gerund and the infinitive have the same uses of a noun and a verb. Thus, you may, find in many sentences either of them being used without any special difference in meaning, as, shown below:, https://abdullahsurati.github.io/bscit
Page 464 :
460, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , His brother started playing the guitar when he was in second standard., His brother started to play the guitar when he was in second standard., To earn is better than to spend., Earning is better than spending., , SUBJECT–VERB AGREEMENT, The ‘subject’ should agree with the ‘verb’ in number and person. A sentence that has a singular, subject is accompanied by a singular verb. On the other hand, a sentence that has a plural, subject should have a plural verb. The complex subject of the sentence is followed by a verb that, agrees with the main noun in the subject., He plays in the playground., They play in the playground., , (singular subject), (plural subject), , There are some nouns that can be treated as both singular and plural forms., The government has (have) announced its (their) new employment scheme., , Other words that can have either singular or plural verbs are school, class, department, team,, university, press, public, crowd, firm, committee, community, family, generation, electorate,, group, jury, orchestra, and the names of specific organizations such as the, Reserve Bank of India, Infosys, Maruti, and BBC., You use a singular verb if, you see an institution or, You use a singular verb if you see an institution or organization as a, organization as a whole, whole unit and plural verb if you see it as a collection of individuals. There, unit and plural verb if you, is not much difference in meaning, although in formal writing, use of, see it as a collection of, singular verb is more common. But in some contexts, a plural form of the, individuals., verb is needed. See the following sentence:, The jury disagree about the guilt of the accused., , However, in the following sentence, a singular form is preferred and you would say, The orchestra is about to play., , This cannot be ‘ The orchestra are …’ as you are referring to the orchestra as a unit, and not, as the individuals comprising it., There are some nouns that are plural and take a plural verb, such as premises, particulars,, belongings, clothes, goods, earnings, surroundings, stairs, riches, savings, congratulations, and, thanks., Congratulations are due to you on your grand success., His belongings are kept in the locker for safety., , Plural verbs are used with the nouns such as police, people, and staff. Some nouns always end, in -s and look as if they are plural, but when we use them as the subject of a sentence, they have, a singular verb as shown in the following sentence:, The news about the kidney racket is very disturbing., , Other words that end in -s and take a singular verb are means (method or money); academic, disciplines, e.g., mathematics, physics, statistics, linguistics, economics, phonetics, and politics;, , https://abdullahsurati.github.io/bscit
Page 465 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 461, , sports such as athletics and gymnastics; and diseases such as diabetes, measles, and rabies., However, let us compare the following:, In academic disciplines:, Politics is the favourite of many students in this university., Statistics was always the most feared subject for students., Economics has only recently been added to the course list., , But in general use:, , What are your politics?, , (political beliefs), , (information shown in numbers), The economics of the project are not very encouraging. (the finances), The statistics are not indicative of this fact., , When a subject is made up of two or more items joined by either ... or or neither … nor,, we use a singular verb if the last item is singular (although a plural verb is sometimes used in, informal English) and a plural verb if the last item is plural., Either the classroom or the auditorium is a good place to hold the lecture., Neither the secretary nor his representatives are to join the club., , If the last item is singular and the previous item plural, you can use either a singular or a, plural verb., Either the teachers or the principal is/are to blame for the problem in the school., , Let us now run through some important rules., , Use the singular verb in the following cases:, (a) With words such as any of, none of, the majority of, a lot of, plenty of, all (of ) some (of ) and, an unaccountable noun, (b) With every and each (normally used with a singular noun):, , Every room in this guest house has an attached kitchen., Each of the boys plays well., , (c) With everyone, everybody, and everything, (every one is two words when the meaning is, each one)., Every one in the audience is considered for inclusion in the workshop., , Use the plural verb in the following cases:, With a/the majority of, a number of, a lot of, plenty of, all (of ), and some (of ) and plural noun, we, use a plural verb. But if we say the number of, we use a singular verb., The number of tigers in the country is decreasing., , but, , A number of reports have been questioned., A lot of lectures are planned., Plenty of showrooms now accept credit cards., , Use either the singular or the plural verb in the following cases:, With any of, each of, either of, neither of, and none of, usually a singular verb is used. The plural, verb is used in informal style., https://abdullahsurati.github.io/bscit
Page 466 :
462, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , I doubt if any of them knows where the illegal arms are hidden., Neither of the popular Indian games has (have) got international recognition so far., , Some phrases with a plural form are thought of as singular and, therefore, take a singular, verb. These include phrases referring to measurements, amounts, and quantities as shown in the, following examples:, Three quarters of a ton is too much., , The three hundred rupees I earned was kept in the locker., , When a subject has two or more items joined by and, a plural verb is used. However, phrases, connected by and can also be followed by singular verbs if you think of them as making up a, single item, as in the following sentences:, Choco pie and ice cream is Amrit’s favourite at the moment., Research and development involves myriad of activities., , After per cent (also percent or %), we use singular verb., , An inflation of 10 per cent per annum makes a big difference in any economy., A 75 per cent likelihood of winning is worth the effort., , TENSES, There are three main tenses—present, past, and future. The tense of a verb reflects the time of, an action or event. Read these three sentences:, The etymology of the, word ‘tense’ is from the, Latin word ‘tempus’, which, means ‘time’., , (a) I sing a song to entertain you., , (b) I sang a song in the competition., (c) I shall sing a song tomorrow for Gandhi Jayanti., , In sentence (a), the verb sing refers to the present time. In sentence (b),, the verb sang refers to the past time, and in sentence (c), the verb shall sing, refers to the future time., A verb that refers to the present time is said to be in the present tense, e.g., I eat, I swim,, and I dance. A verb that refers to the past time is said to be in the past tense, e.g., I ate, I swam,, and I danced. A verb that refers to the future time is said to be in the future tense, e.g., I shall, eat, I shall swim, and I shall dance. Sometimes, a past tense may refer to the present time and a, present tense may express future time, as in the following sentence:, I wish I knew swimming., , These sentences are in the past tense but refer to the present time. The following sentence is, in the present tense but refers to the future tense:, Let us wait till he comes., , Present Tense, Simple present tense, The simple present tense is used in the following cases., 1. To express a habitual action:, , She exercises everyday., I sleep at ten o’clock everyday., My dog keeps the house safe., , https://abdullahsurati.github.io/bscit
Page 467 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 463, , 2. To express general truths:, , The earth revolves around the sun., Medicines are bitter., Self-confidence boosts morale., There are no real secrets to success., , 3. In exclamatory sentences, beginning with here and there to express what is actually taking, place in the present:, , There goes the rocket!, Here she comes!, , 4. In vivid narrative, as substitute for the simple past, and in broadcasting and commentaries, on sporting events, instead of the present continuous tense, to talk about the actions and, events:, , Sachin now advances forward and plays the fast ball., Anuj rushes home immediately., , 5. To express a future event that is part of a fixed timetable or fixed programme:, , The next train is at 6 tomorrow evening., The circus show begins at 10 o’clock., The flight leaves at 5., When does the shop open?, , 6. To introduce quotations:, , Mark Twain says, ‘The right word may be effective, but no word was ever as effective as a rightly, timed pause.’, , Present continuous tense, The present continuous tense is used in the following cases., 1. To describe an ongoing action while speaking:, , He is reading. (now), The girls are riding their cycles., , 2. To describe a temporary action that may not be actually happening at the time of, speaking:, I am reading Gone with the Wind. (But I am not reading it at this moment.), 3. To mention an action that has already been planned/arranged to take place in the near, future:, I am going to Kolkata tonight., My cousin is leaving tomorrow., , It has been pointed out before that the simple present is used for a habitual action. However,, when the reference is to a particularly obstinate habit, something which persists in spite of, advice or warning, we use the present continuous with an adverb such as always, continually,, and constantly., , My pet is naughty; she is always crying out for food., , The following verbs, on account of their meaning, are not normally used in the continuous, form., 1. Verbs of perception, e.g., see, hear, smell, taste, feel, notice, and recognize., 2. Verbs of appearance, e.g., appear, look, and seem., 3. Verbs of emotion, e.g., want, wish, desire, like, love, hate, hope, refuse, and prefer., https://abdullahsurati.github.io/bscit
Page 468 :
464, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , 4. Verbs of thinking, e.g., think, suppose, believe, agree, consider, trust, remember, forget,, know, understand, imagine, mean, and mind., 5. Verbs indicating possession, e.g., own, possess, belong, contain, consist, be (except when, used in the passive)., Some examples having such verbs are given below:, Wrong, , Right, , This honey is tasting sweet., , This honey tastes sweet., , I am thinking you are right., , I think you are right., , Were you hearing that?, , Did you hear that?, , He is having a luxurious car., , He has a luxurious car., , However, the verbs listed above can be used in the continuous tense with a change of, meaning as in the following sentences:, I am feeling great this morning. (feel = feel physically), She’s seeing her friend this evening. (see = visit), I am looking at the strange figure. (look = stare at), , Present perfect tense, The present perfect tense is used in the following cases., 1. To indicate completed activities in the immediate past (with just):, , She has just entered., It has just turned blue., , 2. To express past actions whose time is not given and not definite:, , Have you read The Children of a Lesser God?, I have never seen him in a pensive mood., Mr Singh has been to Mumbai., , 3. To describe past events when you think more of their effect in the present than of the, action itself:, , Anuj has eaten all the bananas. (There aren’t any left for you.), , She has hurt my sentiments. (I am upset.), , I have completed my work. (Now I am free.), 4. To denote an action begun sometime in the past and continuing up to the present, moment (often with since and for phrases):, She has known him for many years., My teacher has been ill since last week., He has warned her every day for the past week—but to no effect., I have not seen Sameer for several weeks., , 5. To express habitual or continued actions:, , We have lived here for twenty years., He has worn contact lenses all his life., The present perfect tense, is never used with adverbs, of past time., , The following adverbs or adverbial phrases can also be used with, the present perfect (apart from those mentioned above): never, ever (in, questions only), so far, till now, yet (in negatives and questions), already,, today, this week, this month, etc., https://abdullahsurati.github.io/bscit
Page 469 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 465, , The present perfect tense is never used with adverbs of past time. You should not say, for, example, ‘He has gone to Kolkata yesterday.’ In such cases, the simple past should be used: ‘He, went to Kolkata yesterday.’, , Present perfect continuous tense, The present perfect continuous is used for an action that began at some time in the past and, is still going on. It is used with since and for to denote point and period of time, respectively:, , She has been studying for five hours. (She is still studying.), They have been building the house for several months., They have been dancing since 4 o’clock., , This tense is also sometimes used for an action already finished. In such cases, the continuity, of the activity is emphasized as an explanation of something., , ‘Why are your shoes so torn?’ ‘I have been working in the garden.’, , Past Tense, Simple past tense, The simple past is used to indicate an action completed in the past. It often occurs with adverbs, or adverbial phrases of the past time., I danced enthusiastically yesterday., , She received compliments after the speech., “, , ”, , He left for the USA last month., , Sometimes, this tense is used without an adverb of, time. In such cases, the time may be either implied or, indicated by the context., I read Akbar and Birbal’s tales during the holidays., I did not concentrate on my studies., The girls defeated the boys in the cricket match., , The simple past is also used for past habits:, , I chanted hymns for many hours everyday., She always carried her sunglasses., , Past continuous tense, The past continuous is used to denote an action going on at some time in the past. The time of, the action may or may not be indicated., , She was watching television all night., It was getting late., The rock fell on him while he was sitting., When I saw him, he was playing badminton., , As in the last two examples above, the past continuous and simple past are used together when, a new action happened in the middle of a longer action. The simple past is used for the new action., This tense is also used with always, continually, etc. for persistent habits in the past., , She was always upset., , https://abdullahsurati.github.io/bscit
Page 470 :
466, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Past perfect tense, The past perfect describes an action completed before a certain moment in the past and before, the happening of another event in the past., , When I arrived at the party, she had already gone home., , The actions of the past should indicate the chronology. The simple past is used to indicate the, later event and the past perfect is used to indicate the earlier event, for example, in the following, sentence, the earlier event of the bus having started, is expressed using the past perfect tense., When I reached the bus stop, the bus had started. (So, I could not get into the bus.), If I had received your letter, I would have replied., I had finished the work before he arrived., , Past perfect continuous tense, The past perfect continuous is used for an action that began before a certain point in the past, and continued up to that time, having linked to the period or point of time in the past., , At that time, he had been writing a book for two months., When the visitors came to the school in the year 2000, Mr Singh had already been teaching there, for two years., , Future Tense, In English language, the future tense is referred to in two ways—the simple future (the ‘going, to’ form) and the simple present., , Simple future tense, The simple future tense is used to refer to the things that you cannot control. It expresses the, future as a fact., , I shall be forty on 13th July., It will be Valentine’s Day next week., You will know your exam results in July., , We also use this tense to talk about what we think or believe will happen in the future:, , I am sure India will win the cricket match., I think I will stand first in the obstacle race., I believe Mayank will be the president., , As in these sentences, this tense is often used with the verb of thinking such as I think, I am, sure, I expect, I believe, and probably. We can also use this tense when we decide to do something, at the time of speaking:, , It is very foggy, I will take my car., ‘She is in a meeting right now.’ ‘Alright, I will wait.’, , We will discuss below the use of ‘going to’, ‘about to’, and ‘be to’ forms in simple future tense., Going to Remember that if an action is already decided upon and preparations have been, made, you should use the ‘going to’ form, not the simple future tense. The simple future tense is, used for an instant decision. The ‘going to’ form (be going to + base of the verb) is used in the, following cases., • When it is decided to do something before taking any action about it:, https://abdullahsurati.github.io/bscit
Page 471 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 467, , ‘Have you finalized the dates for the conference?’ ‘Yes, I am going to the vice-chancellor.’, ‘Why do you want to leave the job?’ ‘I am going to join another organization.’, , • To talk about what seems likely or certain, when there is something in the present that, tells us about the future; to make predictions:, , It is going to be a bright day. Look at the sun., The house is in a dilapidated condition. It is going to fall., She is going to have a tough time., , • To express an action that is on the point of happening:, , Let us get into the class. It is going to start soon., Look! The balloon is going to burst., , About to The ‘be about to + base’ form is used to indicate the immediate future:, , Let us get into the class. It is about to start., Do not go to sleep. We are about to have dinner., , Be to We use ‘be to + base’ form to talk about official plans and arrangements:, , I am to visit your institute next week., The panel discussion is to talk on ‘brain drain’ tomorrow., , ‘Be to’ is used in a formal style, often in news reports. ‘Be’ is usually left out in headlines, e.g.,, ‘President to visit the Tsunami-hit areas’., , Use of present tense in simple future, Simple present The simple present tense is used for official programmes and timetables:, , The institute reopens on 1st August., The class starts at 10 and finishes at 12 noon., When does the next flight for Delhi leave?, , The simple present is often used for future time in clauses with if, unless, when, while, before,, after, until, by the time, and as soon as. The simple future tense is not used in the following cases:, , I will not get into the pool if the water is cold., Can I see the film before I leave?, Let us relax till he completes his writing., Please call me up as soon as you get the information., , Present continuous The present continuous tense is also used for simple future when we, refer to something that we have planned to do in the future:, , I am going for the conference day after tomorrow., We are partying out today evening., Mr Salim Khan is leaving this afternoon., , The present continuous (not the simple present) should be used for personal arrangements., , Future continuous tense, The future continuous tense is used to discuss the actions that will be in progress at a time in, the future., , I suppose she will be singing when we enter the auditorium., This time tomorrow, I will be delivering my lecture in your institute., , https://abdullahsurati.github.io/bscit
Page 472 :
468, , https://abdullahsurati.github.io/bscit, , TECHNICAL COMMUNICATION, , This tense is also used to mention the actions in the future that are already planned or are, expected to happen in the normal course of things as shown in the following sentences:, , She will be staying in the room till the evening., The president will be talking to us tomorrow., The milkman will be coming soon., , Future perfect tense, The future perfect tense is used to talk about the actions that will be completed by or before a, certain future time., , I shall have finished my writing by then., You will have left before he comes to see me., By the end of the day, I will have worked in this place for six hours., , Future perfect continuous tense, The future perfect continuous tense is used for the actions that will be in progress over a period/, point of time and will end in the future. This tense is not very common in use., , By next year, we shall have been living here for one year., , I’ll have been training in this institute for fifteen months by next September., , Active, , Simple, , Continuous, , Perfect, , Perfect continuous, , Present, , I read., , I am readintg., , I have read., , I have been reading., , Past, , I read., , I was reading., , I had read., , I had been reading., , Future, , I will read., , I will be reading., , I will have read., , I will have been reading., , ACTIVE AND PASSIVE VOICE, In technical and scientific writing, it is advisable for the writers to opt for passive without agents, to achieve objectivity. Therefore, the personal pronouns I and we are avoided so that impersonal, style can be achieved, as in ‘This solution was, therefore, found to be far more suitable’ and ‘The, observations were recorded to be put forward at appropriate time’., The impersonal passive is preferred for two reasons—it deletes the subject of an intransitive, verb and a dummy is used in the construction of the sentence. This dummy has neither thematic, nor referential content. For example, there is a dummy word in the sentence: ‘There are two, paintings’., The simple rule of converting active voice into passive is by changing the subject into a direct, object and the direct object into a subject. In most of the cases, the indirect object is a person,, which you call personal passive, such as ‘the children’ in the following sentence:, , , Active voice:, , The father explained the exercise to the children., , , Passive voice:, , The children were explained the exercise by the father., , When you replace the pronoun for ‘the children’, you observe that this pronoun is in its, subject form. This is the reason it is called personal passive., Impersonal passive can, be defined as passives of, reporting verbs., , , , , Active voice:, Passive voice:, , The father explained them the exercise., They were explained the exercise., , Many a time, the agent is removed in passive sentences as ‘by the father’, in the above sentence. Contrarily, impersonal passives can be defined as, https://abdullahsurati.github.io/bscit
Page 473 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 469, , passives of reporting verbs. Verbs that refer to saying, thinking, knowing, and believing are, mostly followed by the to-infinitive form of passive., , , Active:, We all believe that she is in India., , Impersonal passive: She is believed to be in India., , There are four infinitive forms that can be used depending on the tense in the active sentence:, • Simple: to do, • Perfect: to have done, • Continuous: to be doing , • Perfect continuous: to have been doing, The phrase It is said ... is an impersonal passive construction. Passive constructions are, popularly used in news. Some more examples of impersonal passive voice are given below:, , Active:, , Impersonal passive:, , Active:, , Impersonal passive:, , Active:, , Impersonal passive:, , Active:, , Impersonal passive:, , Active:, , Impersonal passive:, , Active:, , Impersonal passive:, , Active:, , Impersonal passive:, , They say he works arduously., He is said to work arduously., They say she sang well., She is said to have sung well., They said she had scored well., She was said to have scored well., They think he has been having a complex., He is thought to have been having a complex., People say that children are afraid of the dark., It is said that children are afraid of the dark., We can generate heat for welding in many ways., Heat can be generated for welding in many ways., We pass an electric current across the electrodes., An electric current is passed across the electrodes., , The following examples show two variations in impersonal passive., • People believe that Chinese is the most widely spoken language., – It is believed that Chinese is the most widely spoken language., – Chinese is believed to be the most widely spoken language., , • Police have reported that it was the mischievous man who caused the accident., , – It has been reported by the police that it was the mischievous man who caused the accident., – The mischievous man has been reported by the police to have caused the accident., , • A journalist reports that they are leaving Chennai tomorrow night., , – It is reported by a journalist that they are leaving Chennai tomorrow night., – They are reported to be leaving Chennai tomorrow night., , • Their parents thought that the teenagers were dancing at the disco., – It was thought that the teenagers were dancing at the disco., – The teenagers were thought to be dancing at the disco., , In scientific writing, active verbs are preferred over passive verbs. Active verbs render the, writing more reader friendly and clear, whereas passive verbs only tend to make it more complex, and unmanageable., , CONDITIONAL SENTENCES, Conditional clauses or ‘if ’ clauses is another name given to conditional sentences. As the main, clause, these are used to express that an action (without if ) can only take place after fulfilling a, certain condition (in the clause with if ). The three types of conditional sentences are listed below:, https://abdullahsurati.github.io/bscit
Page 474 :
470, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Type, , Condition, , I, , Condition possible to fulfil, , II, , Condition in theory possible to fulfil, , III, , Condition not possible to fulfil (too late), , Form:, Type, , ‘If ’ clause, , Main clause, , I, , Simple present, , will-future (or modal + infinitive), , II, , Simple past, , would + infinitive*, , III, , Past perfact, , would + have + past participle *, , *You can substitute could or might for would (should, may, will)., , Examples:, Type, I, , Example, Positive, , If I swim, I will cross the river., , Negative, , If I swim, I won’t sink in the river., If I don’t swim, I will sink in the river., , II, , Positive, , If I swam, I would cross the river., , Negative, , If I swam, I wouldn’t sink in the river., If I didn’t swim, I would sink in the river., , III, , Positive, , If he had swum, he would have crossed the river., , Negative, , If he had swum, he wouldn’t have sunk in the river., If he hadn’t swum, he would have sunk in the river., , In the following examples, observe the ‘if ’ clause:, 1. My uncle has lost his glasses. He thinks they may be at the neighbour’s house., , , Uncle:, I think I left my glasses at your house. Have you seen them?, , Neighbour: No, but I’ll have a look when I get home. If I find it, I’ll tell you., , In this example, the neighbour thinks that there is a real possibility that he will find the, glasses. So, he says, ‘If I find…, I’ll…’., 2. The situation given below is slightly different., Raj says, ‘If I found an urchin in the city, I’d inform the police.’, , Here Raj is not thinking about a real possibility; he is imagining the situation and does, not expect to find an urchin in the city. So, he says, ‘If I found…, I’d (= I would)…’ (not, ‘if I find…, I’ll…’)., When you imagine something like this, you use if + past (if I found/if you were/if we didn’t,, etc.). But the meaning is not past. See the following examples:, What would you do if you won the first prize? (We don’t really expect this to happen.), I don’t really want to go to their conference, but I probably will go. They’d be offended if I didn’t go., Snigdha has decided not to apply for the teaching job. She is not really qualified for it, so she probably, wouldn’t get it if she applied., https://abdullahsurati.github.io/bscit
Page 475 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 471, , Normally, would is not used in the ‘if ’ part of the sentence:, , She would be very scared if she faced the lion. (not ‘if she would face’), If I didn’t attend the dinner, they’d be annoyed. (not ‘if I wouldn’t go’), , But it is possible to say ‘if…would’ when you ask somebody to do something:, , I would be obliged if you would include my name in the list of participants. (As a part of formal, , letter), , ‘Shall I move the papers?’ ‘Yes, please, if you would.’, , In the other part of the sentence (not the ‘if ’ part), we use would (’d)/wouldn’t:, , If you ate more apples, you’d (= you would) probably feel healthier., Would you mind if I used your computer?, , Could and might can replace would here., , If you consume more milk, you might feel healthier. (= It is possible that you would feel healthier.), If it stopped raining, we could go to the institute. (= We would be able to go.), , Look at the following examples:, , She wants to go home but she can’t because she doesn’t remember the way. She says, ‘If I knew the, way, I would go home.’, After ’if’ and ‘wish’, you can, use ‘were instead of ‘was’., , This tells us that she does not know the way. She is imagining the, situation. The real situation is that she does not know the way. In this, situation also, if + past (if I knew/if you were/if we didn’t, etc.) is used., However, the meaning is present, not past., , I would take more sessions if I had more time. (But I don’t have much time.), If you were in my position, what would you do?, It’s a pity you can’t give me medicines. It would be helpful if you could., , We use the past tense in the same way after wish (I wish I knew/I wish you were, etc.). We, use wish to say that we regret something that is not as we would like it to be:, , I wish I knew driving. (I don’t know it and I regret this.), Do you ever wish you could swim?, It rains a lot here. I wish it didn’t rain so often., It’s very lonely here. I wish there weren’t so many vacant houses. (But there are a lot of vacant, houses.), I wish I didn’t have to travel in this weather. (But I have to travel.), , After ‘if ’ and ‘wish’, you can use were instead of was (if I were/I wish it were, etc.). So, you, can say:, If I were the president, I wouldn’t address that gathering. (or ‘If I was the president … .’), I’d go out if it weren’t cold. (or ‘… if it wasn’t cold.’), I wish it were possible., , We do not normally use would in the ‘if ’ part of the sentence or after ‘wish’:, , If I were a millionaire, I would have a chartered plane. (not ‘If I would be millionaire …’), , I wish you had something to eat. (not ‘I wish you would have …’), Sometimes, wish … would is possible as in ‘I wish you would speak’. Note that could sometimes, means ‘would be able to’ and sometimes ‘was/were able to’:, , You could get a loan more easily. (you could get = you would be able to get), Observe the following sentences:, https://abdullahsurati.github.io/bscit
Page 476 :
472, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Last week, Reena was in town for a performance. Leela didn’t know this, so she didn’t go to see her., They met two days ago. Leela said, ‘If I had known you were in town, I would have come to see you.’, , Here, the real situation was that Leela did not know Reena was in town., When you are talking about the past, you use if + had (‘d)… (If had known/been/done, etc.):, , If I’d seen you, of course, I would have exchanged greetings. (But I didn’t see you.), , I would have gone to the cinema last Sunday if I hadn’t been so busy. (But I was busy.), , If I had been with the child, I wouldn’t have allowed him to dive into the deep water. (But I wasn’t, with him.), , The view was panoramic. If I’d had a brush and colours, I would have painted some pictures. (But, I didn’t have a brush and colours.), Compare:, I’m not thirsty. If I was thirsty, I would drink something. (now), , I wasn’t thirsty. If I had been thirsty, I would have drunk something. (past), , Do not use would in the ‘if ’ part of the sentence. Use would in the other part of the sentence:, , If I had seen you, I would have said hello. (not ‘if I would have seen you’), Note that ’d can be would or had:, , If I’d seen you, (I’d seen = I had seen), , I’d have said hello. (I’d have said = I would have said), Use had (done) in the same way after wish. I wish something had happened = I am sorry, that it didn’t happen:, I wish I’d known that Sneha was in the garden. I would have gone to meet her., , (But I didn’t know.), , I feel uneasy. I wish I hadn’t taken so many medicines. (I took many medicines.), , Do you wish you had studied science instead of languages? (You didn’t study science.), The weather was hot while we were away. I wish it had been colder., , Do not use would have… after wish in the following types of sentences:, , I wish it had been colder. (not ‘I wish it would have been colder’.), Compare would (do) and would have (done):, , If I had gone for extra classes last evening, I would be satiated now. (I am not satiated now—, present), , If I had gone to the conglomeration last night, I would have met lots of friends. (I didn’t meet lots, of friends—past), Compare would have, could have, and might have:, , , , Ï we would have eaten out., Ô we could have eaten out., Ô, If the climate hadn’t been so bad, Ô (= we would have been able to party out.), Ì, , Ô we might have gone out., Ô (= perhaps we would have gone out.), , ÔÓ, We use would (’d) when we imagine a situation or action:, It would be nice to have a day off but we can’t afford it., , https://abdullahsurati.github.io/bscit
Page 477 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 473, , I’m not going to discuss it yet with him. I’m not, prepared and I wouldn’t broach the topic., , We use would have (done) when we imagine, situations or actions in the past:, , They supported me a lot. I don’t know what I, would have done without their support., I didn’t go to bed. I wasn’t tired, so I wouldn’t have, slept., , Compare will (’ll) and would (’d):, , I’ll stay a bit longer because I’ve got time., I’d stay a bit longer but I really have to go now. (So, I can’t stay longer.), , ‘If the sales hadn’t been so low, I would have raised your salary.’, , Sometimes, would/wouldn’t is the past of will/won’t. Compare:, Present, , Past, , • Ranjan: I’ll write to you on Monday., , • Ranjan said he’d write to me on Monday., , • Anita: I promise I won’t hesitate., , • Anita promised that she wouldn’t hesitate., , • Leela: Damn! The car won’t start., , • Leela was angry because the car wouldn’t start., , Observe the following situation:, It is raining. Mayank wants to go out, but not in the rain. He says:, I wish it would stop raining., We use ‘would have’ (done), when we imagine situations, or actions in the past., , This means that Mayank is complaining about the rain and wants it, to stop., We use I wish… would… when we want something to happen or, somebody to do something. Mayank is unhappy with the situation. Some, more examples of similar situations are given below:, , The door bell has been constantly ringing for two minutes. I wish somebody would open the door., I wish you would do something instead of just sleeping and wasting time., , You can use I wish…wouldn’t to complain about the things people do repeatedly:, , I wish you wouldn’t keep interfering in my business., , We use I wish…would… for actions and changes, not situations. Compare:, , I wish Sangeeta would come. (= I want her to come.), , I wish Sangeeta were (or was) here now. (not ‘I wish Sangeeta would be…’), , I wish somebody would buy me a diamond necklace., , I wish I had a diamond necklace. (not ‘I wish I would have…’), You can also use would when you talk about the things that happened regularly in the past:, , When we were young, we lived by the river side. In summer, if the weather was hot, we would all get, up early and go for a swim. (= We did this regularly.), Whenever she was happy, she would shop a lot., , In the last sentence, besides the above meaning, would is similar to used to., , Whenever she was happy, she used to shop a lot., , ADJECTIVES AND DEGREES OF COMPARISON, An adjective is a word that qualifies or describes a noun. It can also give the number by, quantifying. It gives extra meaning to the noun by adding something to it., https://abdullahsurati.github.io/bscit
Page 478 :
474, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Adjectives are used attributively and predicatively. When an adjective is, used with the noun as an epithet or attribute, it is said to be used attributively., On the other hand, when an adjective is used along with the verb and forms, part of the predicate, it is said to have been used predicatively., , The beautiful girl was declared Miss India. (attributive), , The girl is beautiful. (predicative), In the first sentence, the adjective beautiful is used along with the noun girl as an epithet or, attribute, whereas in the second sentence, it is used along with the verb is and forms part of the, predicate. Some adjectives can be used only predicatively:, An adjective gives extra, mea-ning to the noun by, adding something to it., , She is scared of lizards., He is quite fine., , Types of Adjectives, Various categories of adjectives are discussed here., , Adjective of quality (descriptive adjective), An adjective of quality shows the quality of a person or thing:, , Pilani is a small town., He is an honest person., The stupid old fool tried to run in the marathon., , This type of adjective will answer the question ‘of what kind’. Even proper adjectives are classified, as adjectives of quality. They are formed from proper nouns such as French fries, French beans,, Hindi grammar, and Turkish tulip., , Adjective of quantity, An adjective of quantity tells us how much of a thing is intended. When an adjective answers, the question ‘how much’, it is an adjective of quantity. However, these adjectives do not indicate, the quantity in definite terms., , I recited some poems., She has done enough studies., Children have no idea about the risks involved in adventure sports., She took great care of her grandchildren., The entire sum of money was spent on buying the new cottage., , Adjective of number (numerical adjective), An adjective of number quantifies persons or things. It also indicates the order of appearance, and answers the question ‘how many’., , Few men dare to combat a lion., There are no good articles in the journal., There are several students waiting to register for this course., , Most boys opt for flying as their hobby., Wednesday is the third day of the week., The cow has one tail., , There are three types of numerical adjectives—indefinite, definite, and distributive., Indefinite numerical adjective An indefinite numerical adjective gives a vague idea of the, numbers and not definite. Such adjectives are many, several, sundry, few, some, certain, and so on., https://abdullahsurati.github.io/bscit
Page 479 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 475, , A few boys were absent in the class., , Definite numerical adjective A definite numerical adjective includes the cardinal numbers, such as one, two, three, and five. It also includes ordinals such as first, second, and third., , I did not take the first bus., , Distributive numerical adjectives These adjectives refer to each one of a number., , , Each girl has done well in the exam., We expect every student to appear for the interview., Each word of yours is an assumption., , Either side of the footpath is laden with rows of flowers., , Neither report on his assassination reflects the true picture., , Adjective of demonstration, An adjective of demonstration gives the answer to the question ‘which’. This and that are used, with singular nouns and these and those with plural nouns., , This is the book I was looking for., Those boys helped in organizing the convention., , Interrogative adjective, ‘Wh’ words such as what, which, whose, and when fall under the category of interrogative, adjectives. What is used in a general sense while which is used in a selective sense., , What car has she opted for?, Which way is the Birla museum?, Whose book is this?, , Comparison of Adjectives, There are three degrees of comparisons., • Positive degree: She is smart., • Comparative degree: But her sister is smarter., • Superlative degree: Their brother, however, is the smartest., The first kind of adjective is in simple form and shows positive degree. It denotes the mere, existence of some quality. It is used in isolation when no comparison is needed. But when there, is comparison between two things, the comparative degree of an adjective denotes a higher, degree of quality than the positive., , She is more intelligent than her friend., Which of those two stories is better for publication?, Today is hotter than yesterday., , The superlative degree of an adjective is used to reflect the best in the group., She is the most beautiful girl in the class., , Formation of comparative and superlative degrees, Most adjectives of one syllable, and some of more than one, form the comparative by adding -er, and the superlative by adding -est to the positive., https://abdullahsurati.github.io/bscit
Page 480 :
476, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , When the positive is a word of one syllable and, ends in a single consonant, preceded by a vowel, this, consonant is doubled before adding -er and -est., , Positive, , Comparative, , Superlative, , smart, , smarter, , smartest, , big, , bigger, , biggest, , faint, , fainter, , faintest, , Positive, , Comparative, , Superlative, , high, , higher, , highest, , big, , bigger, , biggest, , near, , nearer, , nearest, , fat, , fatter, , fattest, , redder, , reddest, , kind, , kinder, , kindest, , red, , quiet, , quieter, , quietest, , sad, , sadder, , saddest, , great, , greater, , greatest, , hot, , hotter, , hottest, , thin, , thinner, , thinnest, , When the positive ends in ‘e’, only -r and -st are, added., , Adjectives of more than two syllables, and, many of those with two, form the comparative, by using the adverb more with the positive and, the superlative by using the adverb most with the, positive., , nice, , nicer, , nicest, , cute, , cuter, , cutest, , blue, , bluer, , bluest, , large, , larger, , largest, , able, , abler, , ablest, , amazing, , more amazing, , most amazing, , brave, , braver, , bravest, , beautiful, , more beautiful, , most beautiful, , gravest, , arduous, , more arduous, , most arduous, , timorous, , more timorous, , most timorous, , courageous, , more, , most, , courageous, , courageous, , erudite, , more erudite, , most erudite, , proper, , more proper, , most proper, , grave, , graver, , When the positive ends in ‘y’, preceded by a, consonant, the ‘y’ is changed into ‘i’ before adding, -er and -est., crazy, , crazier, , craziest, , ugly, , uglier, , ugliest, , lazy, , lazier, , laziest, , heavy, , heavier, , heaviest, , merry, , merrier, , merriest, , healthy, , healthier, , healthiest, , Remember not to use -er when qualities of the, same person are compared. If you have to say that, Seema is more courageous than Reema, you say, ‘Seema is braver than Reema’, but if you have, to say that Seema’s courage is greater than her, compassion, then say ‘Seema is more brave than, compassionate’., , When two objects are compared with each other, the latter term of comparison must, exclude the former:, , The dictionary is more useful than any other book., , Irregular comparison, Some adjectives are compared irregularly, that is, their comparative and superlative degrees, are not made from their positive degrees., https://abdullahsurati.github.io/bscit
Page 481 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , Positive, bad, evil, ill, much, many, late, good, well, old, high, , Comparative, worse, more, more, later, latter, better, older, elder, higher, , Superlative, worst, most, most, latest, last, best, oldest, eldest, highest, , Positive, far, fore, (fore), (out), (in), (up), , Comparative, farther, former, further, outer, inner, upper, , 477, , Superlative, farthest, foremost, first, furthest, outermost, innermost, uppermost, , (Note: The words in parentheses are not adjectives but adverbs.), Adjective, , ADVERBS, , Adverb (Adjective + -ly), , An adverb is a word that adds more information about a, place, time, manner, cause, or degree to a verb, an adjective,, a phrase, or another adverb. A typical adverb may be, Nice, Nicely, recognized by the –ly suffix that has been attached to an, Ease, Easily, adjective such as beautifully, quickly, slowly, nicely, humbly,, Horrible, Horribly, and mortally. We can better understand it with the help of, the adjacent table., Indeed all words ending with -ly are not adverbs. Sometimes, the adverbs and adjectives are the same, word. It may be useful to contrast the adjectives and adverbs in the following pairs of sentences. The, adjective is in the first sentence of each pair., Dangerous, , Dangerously, , Careful, , Carefully, , Adverbs and Adjectives with the Same Form, I caught an early train., I arrived home early., , He walked a straight line., He went straight to his friend., , He aimed at the higher target., He aimed higher next time., , It’s a hard job we have to do., We tried hard to convince them. , , The suffix -ly is not an inflectional suffix, as for example, the -s plural ending on nouns and the, -ed past tense ending on verbs; instead, it is a derivational suffix. We should also note that the words, which end in -ly are adjectives not adverbs, the -ly in this case deriving adjectives from nouns such, as friendly, kingly, cowardly, manly, fatherly, worldly. Consequently, we have adjectives not adverbs in:, She is a friendly person, What a cowardly act!, and Here is some fatherly advice., , Adverbs with Two Forms, Many English adverb forms without -ly look like adjectives; they clearly distribute like adverbs., Many English adverbs lack the -ly ending for historical reason (they are flat adverbs) but that, ending is sometimes extended to them. Consequently, some adverbs can exist in two forms,, one with the -ly ending and one without, as in cheap and cheaply and slow and slowly, which, are merely alternate adverb forms. However, some users of English may resist using words like, cheap and slow as adverbs when alternates such as cheaply and slowly exist. The following adverbs, have two forms:, , She bought them cheap., She bought them cheaply., , Hold it close to you., Hold it closely to you., , https://abdullahsurati.github.io/bscit
Page 482 :
478, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Do it up tight!, Do it up tightly!, , Adverb Forms, Just like some adjectives, a few adverbs also have comparative and superlative forms such as, badly, worse, worst, well, better, best, etc. The comparative and superlatives in most adverbs, require use of more and most as in more commonly and most successfully. See the following, examples:, , Score faster if you wish to win., If you read faster, I will award you an ‘A’ grade., He left earlier than expected., They drive much slower now., , Adverbs as Intensifiers, Adverbs often function as intensifiers giving greater or lesser emphasis. These intensifiers have, three different functions: emphasizers, amplifiers, and down toners., Emphasizers, , I really love him., She literally enjoys dancing., , Amplifiers, , The boss completely rejected the report., I am absolutely fine., They heartily welcomed the members., , Down toners, , She is sort of happy go round., We can improve it to some extent., The boss mildly refused the proposal., , Kinds of Adverb, There are many different kinds of adverbs explained in the following., , Adverbs of manner, An adverb of manner explains how an action has taken place. They are usually placed after the, main verb or after the object., He works well. (after the main verb), Ram runs quickly., Sangeeta speaks softly., Gita laughed loudly to attract her attention., , He plays the flute beautifully. (after the object), He ate the chocolate cake greedily., , Adverbs of time, An adverb of time explains when an action has taken place., She regularly visits France. (frequency), https://abdullahsurati.github.io/bscit
Page 483 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 479, , Mohan never drinks milk. (before the main verb), , Students must always work hard. (after the auxiliary ‘must’), My father went to the principal’s house yesterday., , Later Mohan prepared tea. (before the subject), , Adverbs of place, Adverbs of place tell us where an action has taken place. These adverbs are mostly used after the, main verb or after the object., , , There comes the train. (before the main verb), Books were spread everywhere. (after the main verb), Sita looked up towards the sky., Mohan went outside., They buried the dead body nearby. (after the object), Suresh threw the book outside., , Adverbs of degree, Adverbs of degree explain the intensity of an action, an adjective, or another adverb., , The juice was extremely cold. (before the adjective), Sita is too tired to go out tonight., Seema is just leaving the house. (before the main verb), She has almost finished., He rarely perceived any change in her behaviour., , Relative adverbs, Relative adverbs can be used to join sentences or clauses such as where, when, why., , This is the place where we lost the money., I remember the month when I joined this institute., People were shouting when we entered the hall., Mohan disclosed why he has stolen the money., , Adverbs of frequency, An adverb of frequency expresses how often an action is or was done., , He is always in time for meal., She exercises in the morning everyday., He often smiles while speaking., They sometimes stay up all night., , CONJUCTIONS, A conjunction is a word that joins together two words, phrases, or clauses., , Cup and saucer make a complete set., My love for skiing and the mountains brought me to the Alps., , They are poor but they are honest., An adjective gives extra, Conjunctions make sentences more compact by joining them as in the, meaning to the noun by, following sentence:, adding something to it., https://abdullahsurati.github.io/bscit
Page 484 :
480, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Usha and Geeta are very beautiful., , This is better than saying ‘Usha is very beautiful. Geeta is very beautiful.’ Here are some more, examples:, , Up and down he goes., I will come on Monday or Tuesday., Jerry is small but strong., , You must be careful to distinguish relative pronouns and relative adverbs from conjunctions, because they also bring together parts of a sentence., Some conjunctions are used in pairs and are called correlative conjunctions or correlatives. A, few correlatives are given below:, , Either … or, Neither … nor, Both … and, Whether … or, Not only … but also, , Either attend the classes or go home., He is neither intelligent nor arduous., She is both pretty and intelligent., I am in a dilemma about whether to stay or to go., She is not only a dancer but also a singer., , Some compound expressions are used as conjunctions and are called compound conjunctions,, for example, as if, in order that, even if, on condition that, so that, as soon as, as though, provided, that, and in as much as., , Conjunction Classes, The two main classes of conjunctions are co-ordinating and subordinating conjuctions., , Coordinating conjunctions, When a sentence contains two independent statements or two statements of equal rank or, importance, coordinating conjunction is used. This class includes and, but, for, or, nor, also, either…, or, neither… nor, and so on. They are of the following four types., Cumulative It adds one statement to another:, , We worked hard and we achieved the goal., , Adversative It expresses the contrast between two statements:, , He is weak but enthusiastic., She would participate only if she is invited., I am irked, yet I am quiet., , Disjunctive It expresses the choice between two alternatives:, , She must take the medicines or she will die., Either he is crazy or he is a fanatic., Run fast, else you will not win., , Illative It expresses an inference:, , Somebody surely came in, for I heard footsteps., All preemptive measures must have been neglected, for the malaria spread rapidly., , Subordinating conjunctions, A conjunction introducing a dependent or subordin, ate clause is called a subordinating, conjunction. A subordinating conjunction joins a clause to another on which it depends for its, https://abdullahsurati.github.io/bscit
Page 485 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 481, , full meaning. These are while, where, when, as, unless, before, till, although, though, that, if, because,, and after. Such conjunctions are further classified into seven types according to their meanings., Time, , My grandfather died before I was born., No institute can flourish till it is under the tutelage of an efficient leader., Many events have been organized since you came., I returned to the office after he came., , Cause or reason, , My energy is like the energy of a five-year-old because my mind is active., , Since you want, it shall be done., As she was not there, I talked to her mother., He may join, as he is eager., , Purpose, , We eat apples, so we remain happy., He helped me, lest I should fail., , Result, , I was so enervated that I could scarcely smile., , Condition, , The problem cannot be solved unless you identify it., I will come to the party if you come., , Concession, , I didn’t get the job though I had all the necessary qualifications., A picture is a picture, even if there is nothing aesthetic in it., , Comparison, , He is taller than his brother., , The following are some examples of the use of conjunctions:, Is this right or wrong?, It is better late than never., You can do it if you try., You will only do it when you try., , Conjunctions Used in Adverbial Phrases and Clauses, Conjunctions used in adverbial clauses are considered as subordinating clauses. And these, clauses when used with adverbial clauses, in a sentence, acts like an adverb in that sentence. For, example,, Wherever he goes, he leaves the mark of his churlish behaviour. (The adverbial clause wherever, he goes modifies the verb leaves.), A subordinate conjunction may work as an, adverb, adjective, or noun in complex sentences., An adverbial clause beginning with a subordinating conjunction makes the clause subordinate, or dependent., Common subordinate conjunctions as follows:, https://abdullahsurati.github.io/bscit
Page 486 :
482, , TECHNICAL COMMUNICATION, , although, after, as, as far as, as though, as if, as soon as, because, even if, before, even though, how, if, in as much as, in case (that), , https://abdullahsurati.github.io/bscit, , in order (that), insofar as, in that, lest, no matter how, now that, once, provided (that), since, so that, supposing (that), though, till, than, that, , until, unless, when, wherever, while, whenever, why, where, whether, , Like a single word adverb, an adverbial clause describes a verb and answers the questions, such as where, why, how, when, or to what degree. For example,, , When it rains, the flowers bloom., , Here when is the subordinating clause, it rains is the adverbial clause, and the flowers bloom, is the main clause., , The old lady is hungry because she has no money., , Here the old lady is hungry is the main clause, because is the subordinating clause, and she has, no money is the adverbial clause., , Where there is smoke, there is fire., , Here where is the subordinating conjunction and there is smoke is the adverbial clause., , She danced very well, as if she is a good dancer., , Here she danced well is the main clause, as if is the subordinating conjunction, and she is a good, dancer is the adverbial clause., , She is more beautiful than her sister., , Here she is more beautiful is the main clause, than is the subordinating clause, and her sister is, the adverbial clause., , PREPOSITIONS, A preposition shows the relationship of a noun to the remaining part of the sentence. The word, preposition means ‘place before’. There are two kinds of prepositions—simple and complex., Simple prepositions comprise a single word, e.g., in, at, as, of, and from. Complex prepositions, are the combination of two or more words, e.g., ahead of and due to. Observe the use of the, following propositions., At, in, , At is used with small towns and villages:, , He lives at Pilani., , In is used with cities and countries:, My sister works in Delhi., https://abdullahsurati.github.io/bscit
Page 487 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , By, with, , 483, , By is used before the doer of an action:, , The dog was killed by a lion., , With is used before the name of a tool:, , The judge gave the decision with the pounding, of his gavel., , Between, among Between is used with two, persons or things:, , The father divided the property between the, two children., , Among is used with more than two persons or, things:, Red Crown got the preposition wrong., , , , The father divided the property among, , all the children., , Beside, Besides Beside means ‘by the side of ’:, , I sat beside the vice chancellor., , Besides means ‘in addition to’:, , Besides teaching, she also does English coaching., , In, within In means at the end of a certain period:, , I will finish my work in two days. (i.e., at the end of two days), , Within means before the end of a certain period:, , I will finish the assignment within two days. (i.e., before the end of two days), , Right use of prepositions after verbs, nouns, and adjectives, Sometimes, errors occur due to the wrong use of prepositions after verbs, nouns, and adjectives., The CD contains tables which list tips for correct prepositional usage., The following are examples of the use of prepositions:, Take the time to do it right., Go with the faith of our mothers., Walk in the footsteps of our fathers., That is the question for you., That is what it is all about., , ARTICLES, Articles in English are used to clarify if a noun is specific or not specific. Basically, articles are, adjectives. Like adjectives, articles also modify nouns and are used before nouns or adjectives., There are two types of articles:, Definite articles (the): These are used for specific nouns., Indefinite articles (a, an): These are used for non-specific nouns., The is used to refer to specific or particular nouns; a/an is used to modify non-specific or nonparticular nouns. That is why, the is a definite article and a/an is a non-definite article. For example,, , I am reading the book., , https://abdullahsurati.github.io/bscit
Page 488 :
484, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , Here, but the book I am reading is specific. So the is used. Whereas, in, , Let’s read a book., , The book that I am going to read is not specific. It may be any book., , Indefinite articles, ‘a’ and ‘an’ when used signifies that the noun modified is indefinite, referring to any member of, a group. For example,, , My son wants a dog on his birthday., , This refers to any dog. One cannot find out which dog as it is not found yet., , When I was in Mumbai, I bought an aquarium., , Here the non-specific thing is an aquarium. There are various types of aquarium but there is, one that was bought., 1. Use of a or an depends on the sound that begins the next word:, • a + singular noun beginning with a consonant: a girl, a cycle, a ball, a chair, etc., • an + singular noun beginning with a vowel: an aeroplane, an egg, an apple, an idiot, an, orphan, etc., • a + singular noun beginning with a vowel but having consonant sound: a user, a, university, a unicycle, etc., • an + singular noun beginning with consonant but having vowel sound: an honest, man, an honour, etc., 2. If the noun is modified by an adjective, the use of a and an depends on the initial, sound of the adjective that immediately follows the article. For example, a broken egg,, an honored man, a university event., 3. Indefinite articles are also used to indicate membership in a group. For example, he is a, teacher, Melissa is an American., 4. Indefinite articles are used for countable nouns. For example, I need a glass of water, he, gave me a pen., , Definite article, The following are some uses of ‘the’., 1. The definite article is used before singular and plural nouns when the noun is specific or, particular. The signals that the noun is definite; that it refers to a particular member of a, group. For example:, , The boy who stole my purse was caught by the police., Here, the boy is a specific boy who stole the purse., 2. ‘The’ can be used with uncountable nouns. For example:, ‘I love to sail over the water’ (some specific body of water) or ‘I love to sail over water’ (any water)., , ‘He spilled the milk all over the floor’ (some specific milk, perhaps the milk you bought, earlier that day) or ‘He spilled milk all over the floor’ (any milk)., 3. ‘The’ is used before, •, •, •, •, , names of rivers, oceans, and seas: the Nile, the Pacific, points on the globe: the Equator, the North Pole, geographical areas: the Middle East, the West, deserts, forests, gulfs, and peninsulas: the Sahara, the Persian Gulf, the Black Forest, the, Iberian Peninsula, https://abdullahsurati.github.io/bscit
Page 489 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 485, , 4. ‘The’ is not used before, , • names of most countries/territories: Italy, Mexico, Bolivia; however, the Netherlands,, the Dominican Republic, the Philippines, the United States, • names of cities, towns, or states: Seoul, Manitoba, Miami, • names of streets: Washington Blvd., Main St, • names of lakes and bays: Lake Titicaca, Lake Erie, except with a group of lakes such, as the Great Lakes, • names of mountains: Mount Everest, Mount Fuji, except with ranges of mountains, like the Andes or the Rockies or unusual names like the Matterhorn, • names of continents: Asia, Europe, • names of islands: Easter Island, Maui, Key West, except with island chains like the, Aleutians, the Hebrides, or the Canary Islands, , Omission of Articles, Articles are not used before few nouns like the following., , • names of languages and nationalities: Chinese, English, Spanish, Russian, • names of sports: volleyball, hockey, baseball, • names of academic subjects: mathematics, biology, history, computer science, , SUMMARY, It is difficult to write for technical documents without having the basic knowledge of vocabulary and, grammar., Possessing rich vocabulary provides people with, the confidence to face any communication situation, boldly. Vocabulary can be enhanced significantly, by knowing how to change words from one form, to another, such as from nouns to adjectives. It, can also be remarkably improved by being wellversed with prefixes and suffixes, synonyms, idioms,, confusables, one-word substitutes, homonyms,, homophones, eponyms, and phrasal verbs., To write effectively, one must know the rules, of grammar. Grammar begins with the parts of, speech—noun, adjective, pronoun, verb, adverb,, preposition, conjunction, and interjection., , Imperatives are used to give commands,, instructions, etc. and modality has to do with the, expressions of possibility and necessity. There are, three types of tenses—present, past, and future., Nouns and noun phrases have significant roles, in a sentence. After the knowledge of base verbs,, infinitives, progressives, perfectives, passives, and, modals, attention should be drawn to noun phrases., A preposition shows the relationship of a, noun with the remaining part of the sentence. A, conjunction is a word that joins two words, phrase,, or clauses. A phrase is a group of words without, a subject and a predicate, however, a clause has, a subject as well as a predicate. In a sentence, the, subject and the verb should be in agreement to, each other to make it correct., , EXERCISES, 1. Why do we need rich vocabulary during communication?, 2. English words have undergone a big transformation since the language was developed first. Give, some examples to justify., , 3. Can you substitute one word with another synonym without careful decision? Why or why not?, 4. Which word in English has got the maximum synonyms? How many?, , https://abdullahsurati.github.io/bscit
Page 490 :
486, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , 5. Explain the following terms:, • Homonyms, • Eponyms, • Antonyms , • Homophones, 6. What are the ways to enrich the vocabulary?, 7. From the alternatives given below select the one, that fits the most:, (a) To make (oneself or person) aware of, ______________, (i) acknowledge, (iii) admire, (ii) acquaint, (iv) affinity, (b) Person who is unable to pay his/her debts, ______________, (i) barbaric, (iii) bankrupt, (ii) benign, (iv) benevolent, (c) Spoken or written in two languages, ____________, (i) bias, (iii) biography, (ii) bilingual, (iv) bewilder, (d) Top surface of room ______________, (i) charm, (iii) deceit, (ii) deal, (iv) ceiling, (e) Pertaining to ancient (Greek and Roman), literature and art ______________, (i) deceit, (iii) classic, (ii) depth, (iv) deter, (f) Exact statement of meaning ___________, (i) determine, (iii) decency, (ii) dictionary, (iv) definition, (g) Shaking and vibration at the surface of the, earth ______________, (i) efficiency, (iii) fiscal, (ii) disaster, (iv) earthquake, (h) Great rising and overflowing of water, __________, (i) jogger, (iii) floor, (ii) knob, (iv) flood, (i) To play for money by betting ________, (i) hamper, (iii) knock, (ii) idiom, (iv) gamble, (j) The place where two or more roads or railway, lines meet ______________, (i) justice, (iii) junk, (ii) junction, (iv) majesty, (k) To uncover, to expose to view _______, (i) discover, (iii) disclose, (ii) disapprove, (iv) disobey, (l) The state of having a serious mental illness, ______________, , , , (m), , , (n), , , (n), , , (o), , , (p), , , (q), , , (r), , , (s), , (i) majority, (iii) loyalty, (ii) madness, (iv) mandatory, To take part in an activity __________, (i) payment, (iii) participate, (ii) pause, (iv) pacify, A measurement of the speed at which, something happens ______________, (i) rural, (iii) rate, (ii) routine, (iv) raise, Connected with the practical use of machinery, ______________, (i) tentative, (iii) technical, (ii) terminate, (iv) tiresome, Part of body between hips and ribs, ____________, (i) warn, (iii) whim, (ii) weary, (iv) waist, Unhappy, or, showing, unhappiness, _____________, (i) scale, (iii) sad, (ii) sale, (iv) salad, State of being vacant ______________, (i) vapour, (iii) vacancy, (ii) verbal, (iv) vague, The limited number or amount of people or, thing ______________, (i) quarter, (iii) quest, (ii) quota, (iv) quiet, To force somebody to do something, ____________, (i) observe, (iii) oblige, (ii) object, (iv) obvious, , , , , (t) A join made by tying together two pieces or, ends of string ______________, (i) kit, (iii) knee, (ii) knot, (iv) knob, 8. Give one word for the following:, (a) Person who collects coins, (b) A person who does not believe in religion, (c) The act of killing one’s wife, (d) A post without remuneration, (e) Mania of stealing articles, (f) Words different in meaning but similar in, sound, (g) Walking in sleep, (h) An unexpected stroke of good luck, (i) One who totally abstains from alcohol, (j) A speech by the orator at the end of the play, , https://abdullahsurati.github.io/bscit
Page 491 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , (k) To break off proceedings of the meeting for a, time, (l) The place where bricks are baked, (m) Official in charge of museum, (n) Allowance due to a wife from her husband, from her separation, (o) One who cannot be corrected, (p) Lack of enough blood, 9. Give the meaning of the following words:, reticent, euphony, sybaritic, alleviate, denoue, ment, ramshackle, bucolic, serene, deluge, boisterous, meander, myriad, vituperative, sidereal,, bigwig, soliloquy, gist, enervate, fulsome, winsome, meretricious, nonchalant, noisome, serendipity, usurp, clandestine, 10. Give American English equivalent of the following, words:, (a) Aerial, (f) Pram, (b) Bonnet (of car) (g) Postbox, (c) Handbag, (h) Candy floss, (d) Lavatory, (i) Dustbin, (e) Lift, (j) Chemist, 11. Make the nouns from the following words:, (a) Derive, (e) Hospitalize, (b) Arrive, (f) Examine, (c) Swim, (g) Write, (d) Speaking, 12. Identify the error in the statements and rewrite, them:, (a) The management committee has requested, me not to take any action unless and until I, don’t see all the documents., (b) The manager of the bank was busy; so he/she, asked them to come and see him between two, to three in the afternoon., (c) The article should not exceed more than five, hundred words., (d) He/she signed upon the application form., (e) The economic policy of the government is not, quite in variance with the idea of the socialist, pattern of society., (f) This is one of two types of communication, receivers that is available for general use., (g) Rural women congregated the mud roofs, when the colourful procession passed through, the street., (h) The ability of plan, organize and coordinate, work is all fundamental to working with, deadline., , 487, , 13. Add prefixes to the following words to produce, their antonyms:, (a) apposite, (m) professional, (b) happy, (n) equivocate, (c) action, (o) competent, (d) equate, (p) advantage, (e) able, (q) disputable, (f) adroit, (r) decisive, (g) digestion, (s) comfort, (h) symmetrical, (t) flexible, (i) principled, (u) behave, (j) ethical, (v) educated, (k) moral, (w) exceptional, (l) abate, (x) sensitive, 14. Add suffixes to the following words in consonance with the meanings given against them:, (a) gene ________:, the science of heredity, (b) diction ________: lexicon, (c) gene ________:, family tree, (d) guileless________: naïve, (e) listless________: tiredness, (f) feck________:, weak, (g) micro________:, integrated, computer, circuit, (h) flaw________:, immaculate, (i) klepto________: irresistible desire to steal, (j) sinus________:, cold problem, (k) bio________:, study of living beings, (l) impure________: state of being impure, (m) prefer________:, the act of choosing, 15. Write two synonyms for the following words:, (a) amalgamation (f) cliché, (b) conflagration (g) terse, (c) receptacle, (h) vociferous, (d) tycoon, (i) taciturn, (e) letter, (j) appropriate, 16. Choose an idiom that could be used in reply to, the following., (a) Where’s Mark?, (b) My interview starts in ten minutes., (c) Rachel’s getting married!, (d) My life’s a complete disaster!, (e) Paul says he’s met George W. Bush., (f) I’d better not get home late again tonight. It, would be the third time this week., 17. Identify the pairs of homophones from the following clues., Example: One word means a place for keeping, aircraft; the other word means a shaped piece of, , https://abdullahsurati.github.io/bscit
Page 492 :
488, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , wood, metal, etc. on which you can hang clothes., Answer: Hangar/hanger., (a) One word means simple; the other means an, aircraft., (b) One word means expected; the other word, means condensed vapour., (c) One word is nautical; the other is central to the, body., (d) One word means connections; the other is an, animal., (e) One word means an occasion; the other is a, herb., (f) One word means to hit; the other is a vegetable., (g) One word means permitted; the other means, audible., (h) One word means a singer; the other means a, sum of money., (i) One word means an animal; the other means, an undercover fighter., (j) One word means kind; the other means, searched for., (k) One means excluded; the other means a poet., (l) One word means a day; the other means a, sweet., (m) One word means pursued; the other means, pure., (n) One word means a woolly South American, animal; the other means a Buddhist monk in, Tibet or Mongolia., (o) These are the names of two particular people;, one is a macho man; the other is a poet., 18. Read each sentence and fill in the blank, choosing, the correct homophone., (a) Please ________ our sincere apologies., (accept, except), (b) You will ________ your deposit if you cancel, the order. (lose, loose), (c) ________ going to the fair tomorrow morning., (Their, They’re), (d) Your opinion will not ________ my decision., (affect, effect), (e) He is far ________ young to go by himself. (to,, too, two), (f) She ________ the capitals of every state. (new,, knew), (g) He’s a man ________ opinion I respect. (Who’s,, Whose), (h) They set ________ at dawn. (forth, fourth), , (i) New roads will link the ________ cities of the, area. (principal, principle), (j) I would ________ extreme caution. (advice,, advise), 19. From the given alternatives, choose the one that, is closest in meaning to the underlined word., (a) No player can flout the rules and remain in the, team. (boast about, disobey, make a mockery, of), (b) Developing indigenous technology is im, portant to lead the nation to self-sufficiency., (native, intelligent, capitalistic), (c) He/she felt mortified at his son’s failure to pass, the exam. (depressed, humiliated, unhappy), (d) His impeccable taste and sense of humour, have helped his career. (remarkable; unbeliev, able, flawless), 20. Match the words in column A with the phrses that, best match their meanings in column B:, A, , B, , (a) conflagration, , (i) cut the part, , (b) receptacle, , (ii) list of names, , (c) biotic, , (iii) very huge, , (d) pedagogue, , (iv) the study of, animals, , (e) fusion, , (v) maladroit, , (f ) zoology, , (vi) of living beings, , (g) amputate, , (vii) scientist, , (h) gawky, , (viii) dais, , (i) boffin, , (ix) remove the internal, organ, , (j) roster, , (x) teacher, , (k) rostrum, , (xi) container, , (l) behemoth, , (xii) an uncontrolled, fire, , (m) eviscerate, , (xiii) combination of, atoms, , (n) agenda, , (xiv) alphabetical list of, sources such as, books and articles, , (o) bibliography, , (xv) long research, report, , https://abdullahsurati.github.io/bscit
Page 493 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 489, , (a) You must take care to attend the classes, regularly., (b) We do the overhauling of the machines at, (q) memo, (xvii) the list of indifixed periods of time., vidual, (c) They have opted for new methods of, items to be disinnovation in training., cussed in a meet(d) We have taken a lot of care to generate, ing, alternate methods of energy., 21. Write two synonyms for the following words:, (e) We experience difficulties in operating this, amalgamation cliché, new lathe machine., conflagration terse, (f) We pass electric current through electrode., receptacle, vociferous, (g) Coal miners extract millions of tons of coal, tycoon, taciturn, every week., letter, appropriate, (h) A skilled operator can carry out many, 22. Use gerund instead of infinitive in the following, operations on a lathe., sentences:, 25. Fill in the blanks with suitable prepositions:, (a) To become an engineer has been his long(a) What is the time ________ your watch?, cherished dream., (b) Is the flight ________ time?, (b) To apply for the position of a technician needs, (c) She was born ________ a hamlet called Pilani., at least three years’ experience., (d) Please be comfortable and sit ________ the, (c) To become a good teacher requires lot of, armchair., knowledge and compassion., (e) Looking ________ the blackboard, he, (d) To answer the question, you need a lot of, emphasized the proper use of audiovisual aids., confidence., (f) This is the worst earthquake-hit area _______, (e) To participate in the seminar, you must have, the country., good preparation., (g) Ramesh comes to work by car, but I prefer to, (f) To die is not indicative of victory., come ________ foot., (g) It is difficult to understand the nuances of, (h) He held his breath ________ seven minutes., delivery techniques., (i) I’ll see you ________ home when I get there., (h) His main concern was to maintain eye contact, (j) He usually travels to Chennai ________ train., with the audience., 26. Check the following sentences for subject–verb, 23. Fill in the blanks with suitable comparative adjecagreement:, tives:, (a) The number of jobs are increasing in the, (a) Platinum is ________ (costly) than diamond., technology sector., (b) Sodium is ________ (much) reactive than gold., (b) Neither of the printers are working., (c) Pluto is the ________ (far) planet in the solar, (c) She is one of those people who keeps calm in, system., an emergency., (d) A very few classes are ________ (interest) than, (d) Each of the runners were going at top speed., mathematics class., 27. Fill in the blanks with appropriate forms of the, (e) Zinc is ________ (malleable) than diamond., verbs given in the brackets:, (f) Travel by air is the ________ (fast) mode of, (a) The sun ________ (rise) at 6:03 this morning., transportation., (b) Listening is as important as ________ (speak), (g) Cast iron is ________ (durable) than aluminium., in a group discussion., (h) The summer here is ________ (long) than the, (c) Everything ________ (change) with time., winter., (d) The equipment ________ (begin) to give, (i) A day on Mars is slightly ________ (long) than, trouble before the guarantee expired., a day on Earth., (e) He joined us 12 years ago and he still ________, (j) Cars are ________ (safe) than motorbikes., (work) for us., 24. Rewrite the following sentences transforming, (f) Go down this road, ________ (turn) left, and, them into impersonal passive forms: https://abdullahsurati.github.io/bscit, the road leads to the industrial area., (p) thesis, , (xvi) brief written, communication
Page 494 :
490, , TECHNICAL COMMUNICATION, , https://abdullahsurati.github.io/bscit, , (g) She will be excellent as a receptionist as she, ________ (possess) good manners., (h) Cotton ________ (catch) fire easily., (i) I will phone you when she ________ (come), back., (j) Look at those black clouds. It ________ (rain)., (k) Perhaps we ________ (visit) Kolkata next, week., (l) By 2020, robots ________ (take over) many of, the jobs that people do today., (m) I’m sure she ________ (pass) the exam., (n) The train ________ (arrive) at 5.00 pm., (o) Did you think you ________ (see) me, somewhere before?, (p) The principal ________ (want) to speak to you., (q) She ________ (is) unconscious since morning., (r) I know about that film because I ________, (watch) it twice., 28. Complete the following conditional sentences:, (a) If a person is making a professional oral, presentation, ________., (b) If the speaker and listener belong to different, cultures and different values, ________., (c) If you had prepared well, you ________., (d) ________, the car will not start., 29. Pick out the noun phrases from the following sentences:, (a) Have you ever tried working with a scientific, calculator?, (b) Troglodyte prefers staying in the caves., (c) He dislikes having to punish his subordinates., (d) Travelling in scorching heat gives me no, pleasure., (e) Working with an intellectual is a refreshing, delight., (f) Your doing such a thing boggles me., (g) Early to bed is a good adage., (h) To win an award is my dream., (i) I tried to get the problem right., (j) Did you enjoy writing this book?, 30. Supply the noun phrase:, (a) Do you dream ________?, (b) ________ surprised me., (c) I don’t intend to ________., (d) ________ is not simple., (e) ________ seems dishonest., (f) I hope ________., (g) Lions like ________., (h) She enjoys ________., , (i) I want ________., (j) His mother promised ________., 31. Use conjunctions to fill in the blanks:, (a) He ran away ________ he was afraid., (b) She is more intelligent ________ him., (c) ________ you want it, it shall be done., (d) Make haste, ________ you will be late., (e) ________ he was industrious, I encouraged, him., (f) Blessed are the merciful, ________ they shall, obtain mercy., (g) ________ you are mistaken, ________ I am., (h) I will stay ________ you return., (i) Bread ________ milk is wholesome food., (j) I hear ________ your brother is in Switzerland., 32. Join the following pairs of sentences with suitable, conjunctions. Make necessary changes wherever, required., (a) My mother is well., My father is ill., (b) He is not a knave., He is not a fool., (c) You must be quiet., You must leave the room., (d) The pied piper played., The children danced., (e) I lost the prize., I worked assiduously., (f) We went to the dance show., We did not get the seat., (g) Soldiers fought for the country., Soldiers died for the country., (h) He remains cheerful., He has been wounded., (i) I have a cricket bat., I have a set of stumps., (j) The captive fell down on his knees., The captive pleaded for mercy., 33. Put the correct form of words in the given blanks:, Noun, Adjective, Verb, Adverb, ______, able, enable, ably, Attraction ______, attract, attractively, Friend, friendly, ______, *, Education educational educate, ______, Beauty, beautiful, ______, beautifully, Speed, speedy, speed, ______, Politeness ______, *, politely, ______, popular, *, popularly, Thought, ______, think, *, , https://abdullahsurati.github.io/bscit
Page 495 :
https://abdullahsurati.github.io/bscit, , GRAMMAR AND VOCABULARY DEVELOPMENT, , 34. Expand the given compound nouns so as to bring, out their full meaning:, Commander-in-chief Electromagnetism, Black bird, Clinical medicine, Blowlamp, Bank balance, Stepping stone, Banner headline, Standby, Artificial respiration, Peacock blue , 35. Make plural of the following compound nouns:, Coat-of-mail, Passer-by, Son-in-law, Man-of-war, Daughter-in-law, Stepdaughter, Maidservant , 36. Use proper articles in the sentences given below:, (a) You are _________ best player., (b) _________ Ganga is _________ sacred river., (c) The bellwether knows _________ way., (d) Let us participate in _________ group, discussion effectively., (e) Mumbai is ______ very costly place to live in., (f) Maldives is_________ island., (g) Today_______ European came to my office., (h) He returned after_________ hour., (i) Japanese is_________ easy language., (j) March is _________ third month of the year., 37. Adverbs are used as intensifiers. Show three different functions of adverbial intensifiers with the, appropriate examples., 38. Select the correct form of the verb given below, and write it in the space., (i) One of the boys _________ punished., (a) was, (b) were, (ii) Neither the children nor their mother, _________ admitted., (a) were, (b) was, (iii) All that glitters _________ not gold., (a) is, (b) are, (iv) Two and two _________ four., (a) make, (b) makes, (v) Mohan as well as his friend _________guilty., (a) is, (b) are, (vi) A hundred kilometers _________ good, distance., (a) is, , 491, , (b) are, (vii) The general with all his soldiers _______ killed., (a) were, (b) was, (viii) The poet and philosopher _________ my, friend., (a) are, (b) is, (ix) Peas and cheese _________ an expensive dish., (a) are, (b) is, (x) Many a flower _________ born to blush, unseen., (a) is, (b) are, (xi) Two weeks _________ a long time., (a) is, (b) are, (xii) Two third of the crop _________ruined., (a) is, (b) are, (xiii) Either your eyesight or your brakes _________, bad., (a) is, (b) are, (xiv) The teacher or the student _________wrong., (a) is, (b) are, (xv) Each of the two candidates _________paid his, subscription., (a) have, (b) has, (xvi) Either of these ideas ____________acceptable., (a) are, (b) is, (xvii) The data _________ now ready for analysis., (a) are, (b) is, (xviii) None of the alternatives _________ acceptable., (a) is, (b) are, (xix) More than one car ________ damaged., (a) were, (b) was, (xx) The public _________ tired of everyday strikes., (a) is, (b) are, , https://abdullahsurati.github.io/bscit
Page 496 :
https://abdullahsurati.github.io/bscit, , Features of, CHAPTER, , 2, , OBJECTIVES, , Barriers to Communication, , INTRODUCTION, , Chapter Outline, All chapters in the, book begin with a, chapter outline that, gives an overview, of the contents, covered in the, chapter., , Having studied the basic principles of technical communication, in Chapter 1, we now move on to a very important factor related to, • what communication, communication. Imagine you are a junior executive who has just joined, barriers are and what, as a trainee in an automobile company. You go to meet your boss, to, causes them, seek permission for visiting the automobile exhibition being held in, • how to avoid, CONVERSATIONS AND DIALOGUES 107, Delhi. While you are talking, two of your colleagues also arrive to get, communication failures, your boss’ signature on some bills. You fall silent while he signs the, caused by noise, a telephonic, bills., After, your boss conversation, the two, ‘Hello, when, is they leave, you resume talking but you findInthat, • how to classify, Rajdhani, parties, cannotthissee each other’s facial, hascoming?’, not really grasped what, you have, later analyse, ‘Rajdhani, wont’said earlier. You, communication barriers, move., It’ll colleagues’, stay, Illustrations, expressions, situation, and realize that, your, intervention, led toand, yourother aspects of body, where it is.’, This to, makes it all the more, boss’ lack of concentration. As the sender, you hadlanguage., patiently tried, Illustrations,, important, for them to incorporate the, express your wish. But because of the interruption, by your colleagues,, interspersed with the, State, correct, andthe, articulation in their voices,, the receiver, your boss, could not decode, your message, fully.tone, Hence, Capital?, text in the chapters,, so that the purpose of the phone call is, communication process failed., make the book a more, For example, when, This discussion brings us to the introduction ofachieved, the termsuccessfully., ‘barrier’, youthat, are prevents, corresponding, with a new client for, in communication. A barrier is defined as something, or, lively and interesting, the first, you need to create a desired, controls progress or movement. This definition implies, thattime,, a barrier, read., impression, give the client the correct, is something that comes in the way of the desired, outcome. and, In the, picture, of your was, operations. If you are doing, example given above, notice that the arrival of your, colleagues, this completely, over telephone,, an event that prevented your boss from concentrating, on your conduct assumes, 138 TECHNICAL COMMUNICATION, huge, what you were saying. So, we say that this incident, wasimportance., a barrier to Therefore, although you, cannot, see the caller, in a telephonic, conversation,, follow all the etiquettes that, the, communication, between, you and your, boss. All you, of usneed, havetocome, Use the following links to learn, practise, the animation, schemes andHere, use, them, judiciously, youand, apply, in, a face-to-face, areparents,, some, etiquettes, that you need to follow in, across, such, situations, while conversation., communicating, with, friends, or, in your presentations:, any kind of, telephonic, calls:, colleagues., Let, us now learn, how to avoid such communication failures, http://office.microsoft.com/en-us/powerpoint/CH100673441033.aspx, (animation effects), and make, ourpolite, interactions, moresuch, effective., • Use, expressions, as ‘How(transition, can I help, you?’, ‘May I speak, to Mr …?’, ‘You, CD Links, http://office.microsoft.com/en-us/powerpoint/HA101077711033.aspx, effects), We all, know, that, effective, communication, is the, nerve, of all‘Could, the you please give me the, are, welcome’,, ‘Thank, you, very, much’,, ‘May, I, help, you?’,, http://office.microsoft.com/en-us/powerpoint/ha010451151033.aspx, sequences), businessdetails, activities, in anetc., organization.(timing, Even aanimation, slight break, in the com- The chapters, of …?’,, Also refer to the PowerPoint presentations, given, in the CD.munication flow can lead to misunder- include CD links, If you, are theResource., receiver, identify your name/your organization’s name as soon as you pick, Refer to Rehearsing Presentations, in• the, Students’, Communication is effective, standings. Communication is effective that aid in better, up the call (e.g., Harish here/Sales Division, Monarch & Co.). Avoid, saying ‘hello’., Refer to the CD for the following:, only if it creates the desired, only if it creates the desired impact on understanding of the, • Be, clear, and precise in your expressions, and use pleasant tone of voice while speaking., Sample 1: Detailed outline for, a speech, onreceiver., computer-mediated, communication, impact, on the, the receiver. Often, managers get frusSample 2: A professional presentation, • Do on, notInternet, shout. search engines demystified, concepts discussed, • Do not use slangs., in the book. A CD, • Do not interrupt the caller when he/she is speaking., icon in the left, Practice 1, • If you are transferring the call to somebody else, please ask the caller to hold on., margin of the text, • Listen, to the, caller 1patiently, Prepare the text of your speech with the outline, given, in Sample, in the CD.and get any unfamiliar terms clarified., indicates, • Before you call up anybody, think what and how to discuss so that, you staydigital, focused on, support., your objective., • Do, not slam the equipment when the call is completed. Place it softly., https://abdullahsurati.github.io/bscit, Practice 2, • Do not eat or drink while speaking on the phone., • Do not, to to, others, aroundSeek, youtheir, while, speaking on the phone., Practise and deliver the presentation in Sample, 2 in talk, the CD, your friends., comments., • Do not speak too quickly or too slowly. Use appropriate rate of your voice., You should study the, chapter to know
Page 497 :
the Book, Exercises, A series of practice, exercises highlight the, major topics covered in, the chapter. The questions, enhance learning and can, be used for review and, classroom discussion., , Reports must be precise, based on facts, relevant,, reader-oriented, objective, easy to understand, well, formatted, and well illustrated. There are various, https://abdullahsurati.github.io/bscit, categories, of reports such as informative and, analytical, periodic and special, oral and written,, formal and informal, and group and individual., They can be presented in manuscript, letter, memo,, or pre-printed format., Identifying the scope and purpose, knowing the, audience, identifying the sources of information,, organizing the material, interpreting the data, collected, and drawing an outline are the prewriting, steps that lead to the preparation of an effective,, convincing report., , The structure of a report can be broken down, into prefatory, main text, and supplementary, information segments. Some of the constituents of, these segments are optional sections, such as the, frontispiece and the copyright., Once we have understood the characteristics,, categories, format, and structure of reports, we, choose the most appropriate type of report based, on the purpose at hand. Using the material prepared, during the prewriting stage, the first draft of the, report is prepared. This draft is then edited and, refined to create the end product, which is a highquality technical, business, or professional report., , EXERCISES, 1. Indicate the difference between the following reports:, (a) Oral and written, (b) Formal and informal, (c) Individual and group (d) Long and short, 2. Discuss the various types of reports. Give an example of each., 3. What is a project report? Write a project report on, the recent project you have done in your college., 4. A company is considering a proposal to establish, a new factory in your town. The Managing Director has asked you to write a report on suitability of, the place for the establishment of this factory. For, this report, an outline is provided below. Study, it carefully and rewrite it in accordance with the, principles of co-ordination, subordination, phrasing, numbering, ordering, etc., Establishment of a New Factory, Outline, 1. Introduction, 2. Fire fighting and Communication facilities, (a) Telephone, (b) Fax, (c) Films, (d) Games, 3. Education and Entertainment facilities, 4. How is the market, A. Potential, B. General, 5. Labour from Local and other plants, 5.0 Raw materials, 5.1 Cost, , 6. Transport facilities, 6.1 Rail, road, air, 6.2 Raw materials, (a) Building, (b) Infrastructural, 7. Recommendations, 8. Conclusions, 5. Develop the material given below into a formal, out-line with appropriate numbers and correct, indentation. The outline is not arranged logically., Rework the out-line into its logical form., Animals I Have Had As Pets, I. Members of the cat family, (a) Baby lion, 1. Three days old, 2. Mother died at local zoo, (b) House kittens, 1. Five of these, II. Members of the dog family, (a) Two young dogs, mixed breed, (b) A poodle, (c) German shepherd, (d) Other dogs, III. Canaries, (a) Two males, (b) Three females, (c) Parakeet, IV. Guppies, V. Members of the reptile family, (a) Young grass snake, (b) Green lizard, , Companion CD, The CD contains the following:, Videos on group discussion, and professional presentations, Audio clips comprising, listening and speaking, practice, phonetics, telephonic, conversations, role play, and, negotiation skills, Text supplements including, samples of various formal written, documents as well as additional, topics of interest, https://abdullahsurati.github.io/bscit
Page 498 :
https://abdullahsurati.github.io/bscit, , Preface to the Third Edition, Communication is the glue that binds together various strata of society and also several levels of workforce, in any organization. There are various forms of communication that not only reflect the knowledge, and accomplishments of an individual, but also act as the public face for organizations, exhibiting their, policies and achievements. Though technology has permeated and has been acting as a dominant force, in organizational communication, we still need to follow the basic principles of effective communication, irrespective of the channel—listening, speaking, reading, and writing—it uses for the process. Technical, communication or communicating technical contents has become immensely important for the students, and professionals in order to carry out their assigned tasks successfully. By acquiring the necessary skills in, technical communication, students and professionals can communicate with clarity, precision, and accuracy,, thereby gaining the ability to convey their ideas and points of view with effectiveness and efficiency., Today, writing for the web as well as communicating through the social media are on the rise more, than ever before. Job-seeking students and professionals are increasingly using the social networking, platforms, such as Facebook, LinkedIn, SkillPages, etc., to draw the attention of prospective employers., Moreover, the job providers also try to discover potential candidates through these web forums. For, instance, besides preparing their traditional résumés, fresh graduate students can also prepare social, résumés, which are different in format, structure, and length from the conventional résumés, and upload, them on these forums, thereby publicizing their suitability to a particular job. Similarly, writing wikis,, blogs, etc. has also become very popular these days to stay connected to prospective clients or employers., , About the Book, The third edition of Technical Communication: Principles and Practice has been designed not only to, serve the purpose of being a textbook for courses on technical and professional communication but, also to satisfy the requirements of day-to-day communication needs. It introduces the students as well, as professionals to the role of four communication skills—listening, speaking, reading, and writing, (LSRW)—which enhances their ability to communicate on academic and professional fronts. The, ever-increasing importance of social media has also made us focus on honing the skills required to, communicate through the web., New audio exercises as well as videos have been included in the companion CD with a view to help, the students acquire the necessary linguistic and soft skills., , New to This Edition, • New sections such as brochures, bulletins, newsletters, writing for the web, and non-traditional, résumés, • Concise content with simple and easy-to-understand language, • An audio on phonetics and a video on professional presentation in the companion CD, • New multiple-choice questions for practice as well as flash card glossary in the online resource, centre, https://abdullahsurati.github.io/bscit
Page 499 :
iv, , PREFACE TO THE THIRD EDITION, , https://abdullahsurati.github.io/bscit, , Coverage and Structure, The text is divided into four parts containing 17 chapters., , Part I: Introduction to Technical Communication, Chapter 1 provides an introduction to the basics of technical communication, discussing its importance,, process, levels, and flow of communication. Chapter 2 discusses the various communication barriers and, how to overcome them. Chapter 3 focuses on the non-verbal aspect of communication, including body, movements, space, and vocal features., Part II: Listening and Speaking, Chapter 4 discusses the various types and aspects of active listening. Chapter 5 presents the fundamentals, such as phonemes, accent, and intonation of speaking through numerous examples. The characteristics, of voice and the strategies for achieving confidence, clarity, and fluency in speech are also discussed, in this chapter. Chapter 6 explains the two important forms of communication, namely conversations, and dialogues, which combine both listening and speaking skills. The nuances of giving an effective, presentation are discussed in Chapter 7. The strategies to win interviews and the techniques to actively, participate in various forms of group communication are discussed in Chapters 8 and 9, respectively., Part III: Reading and Writing, Chapter 10 highlights all the important aspects of reading, including skimming and scanning, and, presents reading strategies that help improve comprehension skills. Chapter 11 covers the building, blocks of effective writing, whereas Chapter 12 discusses the art of précis writing. Chapter 13 introduces, report writing, including its objectives, types, importance, formats, and structure. The types, structure,, and style of technical proposal are discussed in Chapter 14. Chapter 15 analyses technical letter writing, and gives examples of various types of business letters, including claim, adjustment, and sales letters., It also discusses email writing as also the etiquettes to be followed while communicating through it., Writing effective research papers and technical descriptions are discussed in Chapter 16., Part IV: Review of Grammar, Chapter 17 covers the essentials of grammar and vocabulary including tenses, impersonal passive voice,, and concord, and listings of idioms, homophones, homonyms, one-word substitutes, and confusables., , About the CD, The CD content is closely linked to the main text. A CD icon in the left margin of the text indicates, digital support. This content, which would be very useful for laboratory sessions, is divided into four, modules as follows:, , Videos This module contains videos that can be used to train the readers for group discussions,, interviews, and professional presentations., , Listening and speaking practice This module contains various types of audio clips related to telephonic, conversation, negotiation skills, role play, and phonetics., , PowerPoint presentations This module contains PowerPoint presentations on body language,, listening, interviews, and group discussion., Text supplements This module contains supplementary material to the main text, including samples, of various formal written documents, such as letters and technical proposals, as well as additional topics, of interest., https://abdullahsurati.github.io/bscit
Page 500 : https://abdullahsurati.github.io/bscit, , PREFACE TO THE THIRD EDITION, , The videos on professional presentations, interviews, and group discussion can be viewed with VLC, Media Player or Windows Media Player., The file ‘Text Supplements’ is a PDF (portable document format) document. Adobe Acrobat or its, Reader is required to view it., , Online Resources, The following resources are available to support the faculty and students using this text., , For Faculty, • PowerPoint Slides, For Students, • Multiple Choice Questions, • Flash card Glossary, • Additional Text Material, , Acknowledgements, We are grateful to Professor B.N. Jain, Vice Chancellor, Birla Institute of Technology and Science, (BITS), Pilani, and Professors G. Raghurama and K.E. Raman, Directors of Pilani and Goa campuses,, respectively, under whose aegis we were provided an environment conducive to complete this edition of, the book., The staff at Oxford University Press, India deserves our special thanks for the tremendous effort put forth, to constantly update us on all the review matters throughout the making of this edition., We appreciate the constructive suggestions given by the reviewers to add new topics and update the, second edition so as to suit the needs of the students., We gratefully acknowledge Raunaq Dhar for providing the sample of a newsletter. Every effort has, been made to trace copyright holders and to obtain their permission for the use of copyright material., We apologize for any errors or omissions and would be grateful if notified of any corrections that should, be incorporated in future reprints or editions of this book., At the home front, we sincerely acknowledge the support and the encouragement we got from our family, members. Meenakshi Raman is running short of words to express her gratitude to her family members for, the unstinting cooperation and affectionate concern extended during the course of the project. Sangeeta, Sharma would like to acknowledge her husband Suresh Sharma for being a pillar of support at all times and, her children Amrit and Anuj for innocently enquiring about the progress of the book and reminding her, to complete the task. Her parents-in-law also need a special mention for never complaining about her deep, involvement in the work and taking away their time., We sincerely hope that this revised edition with its updated, comprehensive coverage of all aspects, and types of technical communication will prove to be highly useful to the readers. Any suggestions for, improvement are welcome., Meenakshi Raman, (
[email protected]), Sangeeta Sharma, (
[email protected]), , https://abdullahsurati.github.io/bscit, , v
Page 502 :
https://abdullahsurati.github.io/bscit, , INDEX, , Index Terms, , Links, , A, Active voice, , 468, , Adjectives, , 473, , Interrogative, , 475, , of demonstration, , 475, , of number, , 474, , of quality, , 474, , of quantity, , 474, , Adverbs, , 477, , Intensifiers, , 478, , Two forms, , 477, , Antonyms, , 444, , Articles, , 483, , Definite, , 484, , Indefinite, , 484, , B, Barriers to communication, , 25, , Interpersonal, , 31, , Intrapersonal, , 27, , Organizational, , 34, , Basic sounds of English, , 73, , Oral and nasal, , 74, , Phonetic transcription, , 78, , Problem sounds, , 80, , Rules of pronunciation, , 79, , This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
Page 503 :
https://abdullahsurati.github.io/bscit, , Index Terms, , Links, , Basic sounds of English (Cont.), Voiced and unvoiced, , 74, , Vowels and consonants, , 74, , Brochure, , 214, , Bulletin, , 214, , Business letters, , 368, , Claim letters, , 377, , Collection letters, , 373, , Cover letters, , 387, , Credit letters, , 369, , Letters of enquiry, , 375, , Order placement letters, , 377, , Sales letters, , 381, , C, Categories of reports, , 288, , Analytical, , 288, , Formal and informal, , 290, , Individual and group, , 290, , Informative, , 288, , Long and short, , 289, , Oral and written, , 289, , Periodic and special, , 288, , Chronemics, , 45, , Cross-cultural variations, , 47, , Language, , 47, , Politics and law, , 48, , Religion and beliefs, , 47, , Social organization, , 48, , Technology, , 48, , Values and attitudes, , 47, , This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
Page 504 :
https://abdullahsurati.github.io/bscit, , Index Terms, , Links, , Comparison of adjectives, , 475, , Comparative degree, , 475, , Positive degree, , 475, , Superlative degree, , 475, , Comprehension techniques, , 224, , Author’s viewpoint (inference), , 226, , Non-verbal signals, , 224, , Predicting the content, , 230, , Punctuation, , 225, , Questions, , 228, , Reader anticipation, , 227, , Sequencing, , 241, , Skimming and scanning, , 224, , SQ3R, , 233, , Structure of paragraphs, , 225, , Structure of text, , 225, , Study skills, , 235, , Summarizing, , 227, , Typical questions, , 228, , Understanding discourse coherence, , 238, , Understanding gist, , 232, , Conditional sentences, , 469, , Conferences, , 210, , Planning and preparation, , 211, , Procedure, , 212, , Significance, , 210, , Confusables, , 445, , Conjuctions, , 479, , Conjunction classes, , 480, , Coordinating conjunctions, , 480, , Subordinating conjunctions, , 480, , This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
Page 505 :
https://abdullahsurati.github.io/bscit, , Index Terms, , Links, , Controlling nervousness and stage fright, , 132, , On-camera techniques, , 133, , Strategies for reducing stage fright, , 132, , Visualization strategies, , 133, , Conversations, , 99, , Strategies for effectiveness, Types, , 100, 99, , Cross-cultural variations, , 47, , Language, , 47, , Politics and law, , 48, , Religion and beliefs, , 47, , Social organization, , 48, , Technology, , 48, , Values and attitudes, , 47, , D, Dialogue writing, , 108, , E, Effective writing, , 252, , Right words and phrases, , 252, , Sentences, , 258, , Emails, , 401, , Advantages, , 404, , Effectiveness and security, , 411, , Etiquette, , 407, , Limitations, , 404, , Style, structure, and content, , 405, , Eponyms, , 450, , This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
Page 506 :
https://abdullahsurati.github.io/bscit, , Index Terms, , Links, , F, Formats of reports, , 290, , Letter, , 292, , Manuscript, , 290, , Memo, , 290, , Future tense, , 466, , Future continuous, , 467, , Future perfect, , 468, , Future perfect continuous, , 468, , Simple future, , 466, , G, Gerunds, , 456, , Group communication, , 176, , Discussions, , 180, , Forms, , 177, , Group discussions, , 185, , Cooperative atmosphere, , 187, , Discussing problems and solutions, , 186, , Intervention, , 189, , Persuasive strategies, , 187, , Reaching a decision, , 190, , Speaking, , 185, , Turn-taking strategies, , 188, , H, Homonyms, , 449, , Homophones, , 449, , This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
Page 507 :
https://abdullahsurati.github.io/bscit, , Index Terms, , Links, , I, Idioms, , 444, , Infinitives, , 458, , Interviews, , 140, , Objectives, , 140, , Types, , 141, , Intonation, , 85, , J, Job interviews, , 143, , Categories, , 143, , Preparing for interviews, , 147, , Process, , 150, , Stages, , 144, , Letter writing, , 352, , L, , Business letters, , 368, , Layout, , 358, , Principles, , 362, , Purpose, , 352, , Seven Cs, , 352, , Significance, , 352, , Structure, , 353, , Listening, , 53, , Barriers, , 65, , Importance, , 54, , Meaning and art, , 54, , Types, , 63, , This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
Page 508 :
https://abdullahsurati.github.io/bscit, , Index Terms, , Links, , Listening modes, , 60, , Active versus passive listening, , 60, , Global versus local listening, , 62, , M, Media interviews, , 171, , Meetings, , 198, , Duration, , 201, , Minutes, , 207, , Notice and agenda, , 201, , Preparation, , 200, , Procedure, , 204, , Purposes, , 199, , Time, , 200, , Venue and set-up, , 203, , Memos, , 392, , Classification, , 395, , Purpose, , 395, , Structure, , 396, , Style, , 400, , Messages, , 350, , Bad news, , 350, , General message, , 350, , Negative message, , 351, , Positive news, , 350, , N, Newsletter, Noise, , 216, 26, , Channel, , 27, , Semantic, , 27, This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
Page 509 :
https://abdullahsurati.github.io/bscit, , Index Terms, , Links, , Non-verbal communication, , 39, , Chronemics, , 45, , Kinesics, , 40, , Proxemics, , 44, , Nouns, , 453, , Collective, , 454, , Common, , 453, , Compound, , 454, , Countable, , 453, , Proper, , 454, , Uncountable, , 453, , One-word substitutes, , 446, , Organizational GD, , 190, , O, , Brainstorming, , 191, , Delphi technique, , 191, , Nominal group technique, , 191, , P, Passive voice, , 468, , Past tense, , 465, , Past continuous, , 465, , Past perfect, , 466, , Past perfect continuous, , 466, , Simple future, , 466, , Simple past, , 465, , Phrasal verbs, , 451, , Phrasal prepositional verbs, , 452, , Prepositional verbs, , 452, , Particle verbs, , 451, , This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
Page 510 :
https://abdullahsurati.github.io/bscit, , Index Terms, , Links, , Planning a letter, , 367, , Audience awareness, , 368, , Clarity of purpose, , 367, , Deciding content, , 368, , Understanding need for response, , 368, , Poor listening, , 54, , Précis writing, , 275, , Guidelines, , 275, , Samples, , 277, , Steps, , 275, , Prefixes, , 442, , Prepositions, , 482, , Presentations, , 113, , Nuances of delivery, , 124, , Outlining and structuring, , 118, , Planning, , 114, , Visual aids, , 133, , Present tense, , 462, , Present continuous, , 463, , Present perfect, , 464, , Present perfect continuous, , 465, , Simple present, , 462, , Press conferences, , 172, , Preparation, , 173, , Process, , 173, , Prewriting, , 294, , Audience, , 294, , Interpreting information, , 297, , Making an outline, , 297, , Organizing the material, , 297, , Purpose and scope, , 294, , Sources of information, , 296, , This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
Page 511 :
https://abdullahsurati.github.io/bscit, , Index Terms, , Links, , Principles of letter writing, , 362, , Clarity and conciseness, , 363, , Correctness and completeness, , 364, , Courtesy and consideration, , 365, , Planning a letter, , 367, , Positive approach, , 365, , ‘You’ attitude, , 362, , Proposals, , 321, , Characteristics, , 323, , Definition, , 322, , Evaluation, , 328, , Purpose, , 322, , Structure, , 324, , Style and appearance, , 328, , Types, , 322, , Proxemics, , 44, , R, Reading comprehension, , 223, , Reports, , 284, , Categories, , 288, , Characteristics, , 286, , Formats, , 290, , Importance, , 285, , Objectives, , 286, , Structure, , 301, , Types, , 312, , Research paper, , 420, , Characteristics, , 420, , Components, , 421, , This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
Page 512 :
https://abdullahsurati.github.io/bscit, , Index Terms, , Links, , Résumés, , 160, , Design and structure, , 161, , Types, , 163, , Seminars, , 213, , S, , Sentence stress, , 83, , Speaking, , 73, , Articulation, , 94, , Clarity, , 90, , Confidence, , 89, , Fluency, , 91, , Pace/rate, , 93, , Pauses, , 95, , Pitch, , 93, , Pronunciation, , 94, , Quality, , 92, , Voice modulation, , 94, , Volume, , 93, , Structure of reports, , 301, , Main text, , 308, , Prefatory parts, , 302, , Supplementary parts, , 311, , Subject–verb agreement, , 460, , Suffixes, , 442, , Symposia, , 213, , Synonyms, , 443, , T, Technical communication, Flow, , 3, 9, , This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
Page 513 :
https://abdullahsurati.github.io/bscit, , Index Terms, , Links, , Technical communication (Cont.), Importance, , 4, , Levels, , 7, , Objectives and characteristics, , 5, , Process, , 5, , Visual aids, , 12, , Technical description, , 427, , Process description, , 431, , Guidelines for writing, , 427, , Object description, , 431, , Techniques for good comprehension, , 224, , Telephonic conversations, , 105, , Tenses, , 462, , Traits of good listener, , 57, , Further contributions, , 59, , Non-evaluative, , 57, , Paraphrasing, , 58, , Reflecting hidden feelings, , 58, , Reflecting implications, , 58, , Responding non-verbally, , 59, , Types of reports, , 312, , Feasibility, , 313, , Incident, , 313, , Introductory, , 312, , Laboratory test, , 313, , Marketing, , 313, , Progress, , 313, , Project, , 314, , W, Word stress, , 81, , This page has been reformatted by Knovel to provide easier navigation., https://abdullahsurati.github.io/bscit
