Question 1 : vertical alignment of 90 UTS rail before welding on 1M straight edge.

Question 2 : How many Third prizes are given for writing more than 10,000 words in Hindi, in a year?

Question 4 : lateral alignment of ________mm rail can be permitted on finished ATW when measured on 10 cm straight edge.?

Question 5 : Which authority circulates training module for Non-Gazetted staff of civil engineering department.?

Question 6 : Track Machines like TEXP, CSM, DTS, WST, UNIMAT, BCM,SBCM, PCCM, TLE, RGM and TRT are inspected by ADEN ________.?

Question 10 : How much length of rail from end of rail is cleaned for AT welding work.?

Question 11 : No work shall be done within a distance of ____metres from the live parts of the O.H.E. without a ‘permit-to-work’ while working in traction areas.?

Question 12 : The anticipated residual life of rail should be atleast____years for conversion of SWR into LWR?

Question 14 : Which of the following is not a regular track maintenance operation?

Question 15 : Permitted lateral end bend for welding on 1 meter straight edge for both new rail as well as SH rail is.

Question 17 : "O" ,red marked is placed on rail by USFD operator for

Question 18 : _____type level crossings are provided for operation of Passenger train for speeds beyond 130 Kmph and up to 160 Kmph on Indian Railway.?

Question 19 : Tank pressure of LPG cylinder in OXY LPG method for welding work is.?

Question 20 : Electrodes of H3C is used for reconditioning of CMS crossing, which have a minimum service life of __ GMT

Question 21 : The frequency of Oscillation Car recording is on routes having speed above 130 Kmph and up to 160 Kmph.?

Question 22 : End cropping of SH rail upto _____mm is done for ATW.

Question 23 : Robotic Welding Technology is used for in-situ reconditioning of CMS crossing on all routes having traffic density more than ___GMT.

Question 24 : How many sample will be taken from 200 portion after lapse of 2 years for testing when testing is found satisfactory

Question 25 : Minimum head width of 52Kg SH rail is allowed to be welded.

Question 27 : lateral alignment of ________mm rail can be permitted on finished ATW when measured on 1M straight edge

Question 28 : Clear working gap of sleeper from centre of weding gap on either side for welding work

Question 29 : Class I PWay material,ends to be painted with a daub of

Question 31 : Minimum height of 52Kg SH rail is allowed to be welded.

Question 34 : Which of the following publication is not compulsory to be kept with ADEN's Office ?

Question 35 : Permanent way staffs are advised to keep clear of the tracks and avoid contact with the rails when an electrically hauled train is within ___ meter in A.C. Traction Area.

Question 36 : _____mm higher rail can be permitted on finished ATW when measured on 10 Cm straight edge.?

Question 38 : _____type of bridge sleepers are used for operation of Passenger train for speeds beyond 110 Kmph and up to 160 Kmph on Indian Railway

Question 40 : ___time penalty is imposed if a weld failed which is executed by agency with upgraded AT welding technique.

Question 41 : How many First prizes are given for writing more than 10,000 words in Hindi, in a year?

Question 42 : Pre heating of rail at ________temp should reach for welding work.

Question 43 : Track Quality index of section is treated "Good" on section having speed >110kmph if value of TQ is

Question 44 : Work of Other Organization like RVNL, RITES, DFCCIL, Construction etc. should be inspected by ADEN_____

Question 46 : Small track machine under his jurisdiction shall be inspected by ADEN once in _____months

Question 49 : What is the amount of Third prize, given under Collective Cash Award Scheme?

Question 51 : Failure of AT weld should not be more than ______% when welding work is executed with normal method

Question 52 : Maximum permissible cant can be provided for operation of Passenger train for speeds beyond 130 Kmph and up to 160 Kmph on Indian Railway

Question 53 : XX red marked is placed on rail by USFD operator for

Question 54 : No bolt hole should be there from end of rail before welding.

Question 57 : vertical alignment of 72 UTS rail before welding on 1M straight edge.

Question 58 : No part of the tree shall be nearer than___ m from the nearest live conductor in traction areas.

Question 59 : To protect the rail top while welding work, ___cm of rail head on either side of the moulds shoe be protected by metal cover or luting sand.

Question 60 : First Train can be allowed to pass over newly weld after.?

Question 62 : Permitted vertical end bend for welding on 1 meter straight edge for both new rail as well as SH rail is.?

Question 66 : Failure of AT weld should be less than ______% when welding work is executed with upgraded method.

Question 68 : Revalidating of TW-2 course can be done after expiry of TW-2 certificate.

Question 69 : Second hand Sleepers fit for use in track works to be painted with a daub of.?

Question 70 : The frequency of Oscillation Car recording is on routes having speed above 110 Kmph and up to 130 Kmph.?

Question 71 : In case welding of Alloy steel rail, 300mm on either side of rail joint is covered atleast ___minutes with insulation hood for controlled cooling

Question 73 : Track Machines other than TEXP, CSM, DTS, WST, UNIMAT, BCM,SBCM, PCCM, TLE, RGM and TRT are inspected by ADEN ________

Question 74 : Track Quality index of section is treated "Average" on section having speed >110kmph if value of TQ is

Question 75 : What is the amount of Second prize, given under Collective Cash Award Scheme?

Question 76 : XXX red marked is placed on rail by USFD operator for

Question 77 : Tank pressure of oxy cylinder in OXY LPG method for welding work is

Question 78 : Minimum head width of 60Kg SH rail is allowed to be welded.

Question 79 : Minimum height of 60Kg SH rail is allowed to be welded.

Question 80 : While unloading rails along tracks, care shall be taken to ensure that rails do not touch each other to form a continuous metallic mass of length greater than____ metres in A.C. Traction Area

Question 81 : Which of the following equipment is not required to be provided to a stationary watchman.

Question 82 : _____mm higher rail can be permitted on finished ATW when measured on 1M straight edge

Question 83 : Summary of P.Way material to be released is prepared in the format of Annexure ________Para 721.?

Question 88 : SH rails older than ____years should be avoided to be welded.?

Question 90 : No of welds required to be executed after TW-1 within 6 month to appear for TW-2 certificate

Question 91 : End cropping of SH rail upto _____mm is done for FBW.

Question 92 : _____mm lower rail can be permitted on finished ATW when measured on 10 Cm straight edge

Question 94 : _____type level crossings are provided for operation of Passenger train for speeds beyond 110 Kmph and up to 130 Kmph on Indian Railway

Question 95 : How much length of rail from end of rail is cleaned for AT welding work

Question 96 : ___time penalty is imposed if a weld failed which is executed agency with normal welding technique.

Question 98 : Which among the following equipment is not used on during Hot weather patrolling.

Question 100 : No holes should be made within ______ from centre of 25mm SKV weld.

Question 102 : Unserviceable material Class III - not fit for use– Ends to be painted with a daub of.?

Question 103 : X red marked is placed on rail by USFD operator for.?

Question 105 : Periodicity of testing of SKV Weld on section having 45 GMT