MCQ Test of ROSHAN IRPWM JUNE 2020, LDCE/LGS P.Way JE LDCE EXAM - Study Material
Question 1 :
Duomatic (Plain Track Tamper) - It is a Plain track tamper and with ___ tamping tools to pack two sleepers at a time.
Question 3 :
During post tamping operations, If the recorder is not available, then gauge and cross level at every ___ sleepers of tamped track should be recorded.
Question 5 :
The sensitivity of the USFD equipment shall be set up once every ___ days with the help of standard rail pieces.
Question 6 :
Ballast Stacks having more than___% retention of ballast on 65mm sieve shall be rejected.
Question 7 :
Who will impose penalty of compulsory retirement, removal or dismissal from service.
Question 9 :
For ballast, The height shall not be more than ___m. Top width of stack shall not be less than____m.
Question 11 :
Which rule of the Railway services conduct rules, 1966 requires previous knowledge of the Government for purchase of immovable property .
Question 12 :
For new line, doubling, gauge conversion etc. the total (clean) cushion before undertaking tamping by machine should be at least ____ mm (on main line) and ____mm on loop lines/siding.
Question 15 :
For detection of bolt hole cracks, ___ degree probes are ideal.
Question 16 :
TLE is a semi mechanized system of track renewal consisting of self-propelled portal cranes capable of moving on a auxiliary track of ___ mm gauge.
Question 17 :
High points on the turn out and approaches should be determined and general lift should be decided. General lift of minimum ___ mm must be given.
Question 19 :
The two persons who represent cases in a D&AR inquiry on behalf of concerned parties are ______ and _____.
Question 21 :
Blocking of a portion of line for maintenance work by more than one department i.e, Engineering, TRD and S&T departments simultaneously is called.
Question 22 :
Which article of the constitution contain provision regarding the official language of Union of India.
Question 23 :
In view of the revised criteria of defect mentioned for need based USFD inspection, the testing frequency of ___ GMT has been prescribed.
Question 24 :
Cubical content of each ballast stack shall normally be not less than ___cum in plain areas and___ cum in hilly areas.
Question 26 :
Stop Indicator shall consist of a horizontal board of __________ size and painted with red and white vertical stripes.
Question 27 :
If the total (clean and caked) ballast cushion is less than ___mm, cutter bar may cut the formation and form a channel under the track.
Question 28 :
For maintenance packing, squeezing time of ___ second to ___second should normally be adequate.
Question 29 :
The sensitivity calibration against temperature variation of USFD machine shall be carried out at least once in ____.
Question 32 :
For purpose of USFD testing of tongue rails of points and crossings, the tongue rail can be demarcated in ____ zones.
Question 36 :
Who is the competent authority to make rules under RS (D&A) Rules 1968 .
Question 37 :
The Ballast shall be treated as under size and shall be rejected if.
Question 38 :
In which part and in which article of the constitution provision regarding the language to be used for transaction of business in State Legislatures exists .
Question 39 :
The height of ballast stack shall not be less than ___m except in hilly areas where it may be ___m.
Question 41 :
Under the payment of wages act, 1936 payment of wages of establishments employing not more than 1000 employee shall be paid within ___ of the wage month.
Question 42 :
It is a self-propelled 4-wheeler vehicle with crane used for loading and unloading and transportation of P. Way materials like rail, sleeper and other heavy materials.
Question 43 :
While the ________ is in force, no traffic train shall be allowed to enter the obstructed section under any circumstances.
Question 45 :
First periodic USFD test of AT welding (SKV) should be done within ____ of welding.
Question 46 :
During sieve analysis of ballast, The percentage passing through or retained on the sieve shall be determined by ___.
Question 48 :
The abrasion test for track ballast shall be carried out using ____.
Question 49 :
If safety is endangered, the PWIs can impose _______________ for ensuring safety.
Question 51 :
Frequency of USFD testing of rail for all BG routes having > 24 < = 40 GMT.
Question 52 :
Inspection frequency of open line SSE (P.Way) incharge/JE (P.Way) sectional during machine working.
Question 54 :
Ballast cleaning machines is capable of disposing off the muck along the cess at a distance of about ___ m from the centre of track.
Question 55 :
Cracks lesser than ___mm size cannot be detected by the present arrangement of USFD machines.
Question 56 :
Works of normal routine maintenance, such as renewals of keys and bolts, isolated renewals of a chair, pot or sleeper,picking up of slacks, overhauling etc are comes under which category.
Question 57 :
In case of OBS/OBSW defects painting on both faces of web of rail as
Question 58 :
The double rail tester is capable of testing both the rails at a time. For each rail, ____ probes have been provided for the present
Question 60 :
In view of the revised criteria of defect mentioned for need based USFD inspection, the testing frequency of ___ GMT has been prescribed.
Question 62 :
For ballast, The height shall not be more than ___m. Top width of stack shall not be less than____m.
Question 63 :
During levelling of track by tampers datum rail may be taken for straight track in single line and straight middle track in multiple lines section.
Question 64 :
The worn out tamping tools (more than 20% C/S area) are to be ______.
Question 65 :
A stop indicator shall be exhibited at a distance of _____ metres from the place of obstruction.
Question 66 :
How many days of HLAP in a year, can be credited to an employee
Question 67 :
During Survey for Longitudinal/Vertical Profile Correction by tampers: The identified section should be divided by marking stations at ____m interval.
Question 68 :
After the initial USFD testing of rails in rail manufacturing plant, the subsequent USFD testing ____ until the rail have undergone 15% of the service life in GMT.
Question 70 :
Choose the correct match between type of machines with their output/effective hour, 1.CSM 2.BCM(Plain) 3.TRT 4.TEX A. 200m B. 400m C.1200m D. 1600m.
Question 72 :
How many articles are there in the Part XVII of the Constitution.
Question 73 :
Which of the following Rules of RS (D&A) Rules, 1968 does specify the penalties.
Question 74 :
A person found/declared suitable and promoted can be reverted for unsatisfactory work within ____ months without following the procedure prescribed in the D&A rules.
Question 75 :
Which article of the constitution contain provision regarding the language to be used in courts etc.
Question 78 :
Quantities operated in excess of 140% but up to 150% of the agreement quantity of the concerned item.
Question 79 :
Desirable gap between top edge of the tamping tool blade and bottom edge of sleeper for Flat bottom sleeper.
Question 80 :
What are all the Articles covered under Part XVII of the Constitution.
Question 81 :
In case of defective weld (DFWO/DFWR) on major bridges & bridge approaches or Tunnels & on Tunnels approaches within ____ m , the defective weld shall be replaced within 3 days of detection.
Question 83 :
These items are purchased as and when required to meet specific demands and are called as ___ items.
Question 85 :
On which date Part XVII of the Constitution was passed in Parliament.
Question 86 :
The Squeezing pressure for P & C (PSC) used in Indian Railways.
Question 87 :
Which is not used as a couplent when USFD testing by hand probing.
Question 88 :
The internal size of the frame (i.e. clear size of perforated plate mounted on frame) shall not be less than ___cm in length, __cm in breadth and ___cm in height on sides.
Question 89 :
On supply of the first___ cum of ballast, the tests for Size & Gradation, Abrasion Value,Impact Value and Water Absorption shall be carried out by Railway.
Question 90 :
In which part and in which article of the constitution provision regarding the language to be used for transaction of business in Parliament exists.
Question 94 :
Frequency of Abrasion Value, Impact Value and Water Absorption Value tests for ballast.
Question 95 :
During BCM working at the end of work, about ___ sleeper spaces are left without ballast.
Question 96 :
The engineering department will interact with the _______ department for obtaining line block.
Question 97 :
The tests of ballast ,subsequent to award of contract, shall be done at ______.
Question 98 :
Reservation for SC and ST candidates in group D recruitment in Railways is _____ and _____ % respectively.
Question 99 :
These are the items which have not been issued to any indenter during past 24 months or more and are not likely to be utilized on any Railway in near future years.
Question 100 :
Which article of the constitution contain provision regarding the official language of States
Question 104 :
Newly recruited JE/SSE/PWays have to undergo Induction training program of duration of ___ .
Question 105 :
Which part of the Constitution contains provisions regarding Official Language .
Question 106 :
The consolidation of ballast can also be achieved faster, uniformly and more effectively by means of a ______ .
Question 107 :
During water absorption test of ballast The aggregate shall then be placed in an oven at a temperature 100-110°C for____ hours .
Question 108 :
If a weld joint found OBS during initial acceptance test, what action taken .
Question 110 :
New entrants in Railway Service will come under New Pension Scheme .
Question 112 :
For works requiring 'stop dead‘ speed restriction, __________ Indicators shall be fixed
Question 113 :
The maximum cant that can be provided on BG has to be.
Question 114 :
The degree of curvature should be taken as the angle at the centre subtended by an Arc of ____metre in length .
Question 118 :
When the turnout curve takes off from outside the main curve the effective radius of turnout in case of similar flexure turnout is given by.
Question 119 :
What was the Hight of the Speed restriction board from Rail level to bottom of Triangle .
Question 120 :
In cuttings and high banks trolley refuges should be provided at ____meter interval .
Question 121 :
The inspection schedule of ADEN for Fast Train Inspection , Entire sub-division to be covered by either Engine or Rear Window of fast train :
Question 123 :
The inspection schedule of ADEN for Points & Crossings, All Points & Crossing on passenger running lines; and 10 % of Points & Crossing on other lines
Question 127 :
The inspection schedule of Assistant Divisional Engineer for Small Track Machine.
Question 128 :
The inspection schedule of SSE/P.Way (In-charge) for Push Trolley inspection, Routes having speed above 110 Kmph and Multiple Line Routes , Entire section including loops lines and yards.
Question 129 :
28.The inspection schedule of JE/SSE/P.Way (Sectional) for Push Trolley inspection, Other Routes , Entire section including loops lines and yards .
Question 131 :
The schedule of Inspection of Points & Crossing Other lines and yard lines , by JE/SSE/P.Way (Sectional) under his jurisdiction is
Question 133 :
Renewal/recoupment of fastenings requiring lifting , should be carried at least under the supervision of .
Question 134 :
Mechanised Tamping, Lifting (general lift), Alignment, Minor alignment of curves, Deep screening etc., should be carried at least under the supervision of.
Question 135 :
Manual Packing, Alignment should be carried at least under the supervision of .
Question 136 :
Packing or renewal of single isolated sleeper not requiring lifting or slewing of track, should be carried at least under the supervision of .
Question 137 :
Renewal of fastenings not requiring lifting ,should be carried at least under the supervision of .
Question 138 :
Making up of shortage of ballast in shoulders at isolated places , should be carried at least under the supervision of .
Question 139 :
Competency certificate to welding operators for flush butt welding shall be granted by.
Question 140 :
SWR on PSC sleepers shall not be laid on curves sharper than ____ metre radius ..
Question 141 :
Destressing temperature for 60 kg. rail in zone IV whose Tm is 37 Deg.is ____ Deg.
Question 142 :
The minimum track structure on the running loops should be ___ Kg/m rails laid as _____Panels, sleeper density ____ Nos.per km and ____mm clean ballast cushion .
Question 143 :
In temperature Zone-I, if LWR/CWR laid on curves of 350 m radius then SEJ should be located in straight track at ____ m away from the tangent point ..
Question 144 :
Wherever on reverse curves neither straight can be eliminated nor a straight of minimum 50 meters can be provided on B.G Permissible speed should not exceed ..
Question 145 :
In case, LWR is terminated near Points & Crossings, one three rail panel (39 m) shall be provided between _____ ..
Question 146 :
All insulations for track circuiting in LWR/CWR shall be done by providing glued joints of ____ type ..
Question 148 :
While carrying out destressing of LWRs without Rail Tensors , before traffic block fastenings on alternate sleepers may be loosened after imposition of speed restriction of .
Question 149 :
For changing LWR into CWR the value use l + Lα(t0-tp) +Y0 + Y'0 + 2 x 25 -1, Here L is equal to .
Question 150 :
The regular track maintenance in LWR/CWR shall be confined to hours when the rail temperature is between _____ and shall be completed well before onset of summer ..
Question 151 :
During Casual renewal of sleepers in LWR, Not more than one sleeper in ____ consecutive sleepers shall be replaced at a time ..
Question 152 :
Once in a ____ SEJs shall be checked, packed and aligned if necessary. Oiling and greasing of tongue and stock rails of SEJ and tightening of fastenings shall be done simultaneously .
Question 153 :
If range of rail temperature falls within _____, deep screening may be done without cutting or temporary de-stressing .
Question 154 :
Breathing length(in meters) on PRC sleepers 60 kg/m (UIC) rail and sleeper density 1540 in zone III ..
Question 155 :
Breathing length(in meters) on PRC sleepers 60 kg/m (UIC) rail and sleeper density 1540 in zone IV ..
Question 156 :
Breathing length(in meters) on PRC sleepers 52 kg/m rail and sleeper density 1660 in zone III .
Question 158 :
Maximum cant on curved track on Broad Gauge– Group ‘D' & ' E ' routes shall be ..
Question 159 :
Maximum value of cant deficiency, On routes with sectional speed less than 100 Kmph is ____ ..
Question 160 :
. A curve of radius 440m has a transition length of 100 m and laid with 100mm S.E. and Max .sectional speed is 110 kmph.What is value of cant Gradient ..